dsul-go

README

DSUL - Disturb State USB Light : Go

The goal of the project is to have a USB connected light, that can be be set to different colors, with adjustable brightness and different modes, which can communicate the users current preference regarding being disturbed.

This implementation uses Go for both daemon/server and client. It should work on most platforms as it uses as few and standard libraries as possible.

Hardware

The hardware used is an Arduino connected to a NeoPixel module. The project was developed using an Arduino Nano, but should work on most models as long as the firmware fit and it has enough RAM for the number of LED's used in the module.

The firmware project is available at hymnis/dsul-arduino.

Firmware

As both FW (firmware) and SW (software) needs to talk to each other, not all combinations of versions work. Make sure that the FW and SW versions are compatible with each other. The latest (stable) versions usually has the best support. For more information about compatibility, see the Firmware wiki page.

Specifications on the serial protocol and messages can be found in the firmware repository.

Other implementations

There's also a sister project to this one that uses Python instead, called dsul-python. It uses a different approach to IPC and has support for TCP sockets and can work over network but lacks encryption or security.

Installation (manual)

DSUL aims to be a proper Go project and can be built into packages.

Build package(s)

go build -ldflags "-X main.version=$(head -1 ./cmd/dsuld/VERSION) -X main.sha1=$(git rev-parse HEAD) -X main.buildTime=$(date +'%Y-%m-%d_%T')" -o dsuld ./cmd/dsuld/main.go
go build -ldflags "-X main.version=$(head -1 ./cmd/dsulc/VERSION) -X main.sha1=$(git rev-parse HEAD) -X main.buildTime=$(date +'%Y-%m-%d_%T')" -o dsulc ./cmd/dsulc/main.go

Daemon, dsuld

This part handles communication with the hardware (serial connection) and allows clients to send commands.

As module: go run ./cmd/dsuld/main.go [arguments]
As binary: dsuld [arguments]

Arguments

-h, --help                Show help and usage information.
-c, --comport <comport>   The COM port to use. [default: /dev/ttyUSB0]
-b, --baudrate <baudrate> The baudrate to use with the COM port. [default: 38400]
-v, --version             Show current version.
--verbose                 Show more detailed output.

CLI client, dsulc

Used to communicate with the daemon through IPC.

As module: go run ./cmd/dsulc/main.go [arguments]
As binary: dsulc [arguments]

Arguments

-h, --help                     Show help and usage information.
-l, --list                     List acceptable values for color, brightness and mode.
-c, --color <color>            Set color to given value (must be one of the predefined colors).
-b, --brightness <brightness>  Set brightness to given value.
-m, --mode <mode>              Set mode to given value (must be on of the predefined modes).
-d, --dim                      Turn on color dimming.
-u, --undim                    Turn off color dimming.
-v, --version                  Show current version.
--verbose                      Show more detailed output.

Development

This is the basic flow for development on the project. Step 1-2 should only have to be run once, while 3-8 is the continuous development cycle.

1. Initialize pre-commit (pre-commit install)
2. Create feature branch
3. Develop stuff
4. Format and lint
5. Test
6. Commit changes
7. Push changes

Requirements

As this repo uses pre-commit that does linting and format checking. pre-commit must be installed prior to commit, for it to work.

Formatting

All Go code should be formatted by gofmt. If it's not it will be caught by the pre-commit hook.

Linting, checks and test

Tests are located in the module directory. They should be named according to format: <module name>_test.go

To check the code itself we use go vet.

pre-commit

Current configuration will lint and format check as well as check files for strings (like "TODO" and "DEBUG") and missed git merge markings. Look in .pre-commig-config.yaml for exact order of tasks and their settings.