modules

package
v0.0.0-...-b47c6c8 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 1, 2019 License: Apache-2.0 Imports: 1 Imported by: 32

Documentation

Overview

*Copyright 2015 Huawei Technologies Co., Ltd. All rights reserved. * eSDK is licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License.

*Copyright 2015 Huawei Technologies Co., Ltd. All rights reserved. * eSDK is licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License.

*Copyright 2015 Huawei Technologies Co., Ltd. All rights reserved. * eSDK is licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License.

Index

Constants

View Source 
const (
	HttpOK                         = 200
	HttpBadRequest                 = 400
	HttpUnauthorized               = 401
	HttpForbidden                  = 403
	HttpNotFound                   = 404
	HttpMethodNotAllowed           = 405
	HttpNotAcceptable              = 406
	HttpProxyAuthenticationRequied = 407
	HttpRequestTimeout             = 408
	HttpConflict                   = 409
	HttpInternalServerError        = 500
	HttpNotImplemented             = 501
	HttpBadGateway                 = 502
	HttpServiceUnavailable         = 503
	HttpGatewayTimeout             = 504
)

Http response code

View Source 
const (
	HTTP_GET    = "GET"
	HTTP_POST   = "POST"
	HTTP_DELETE = "DELETE"
	HTTP_PUT    = "PUT"
	HTTP_HEAD   = "HEAD"
	HTTP_PATCH  = "PATCH"
)

Http method

View Source 
const (
	HTTP  = "http"
	HTTPS = "https"
)

Scheme type

View Source 
const (
	ApplicationJson            = "application/json"
	ApplicationOpenstackJson20 = "application/openstack-images-v2.0-json-patch"
	ApplicationOpenstackJson21 = "application/openstack-images-v2.1-json-json-patch"
)

Request content type

View Source 
const (
	V4_AUTH = iota
	Token_AUTH
)

Authorization type

View Source 
const (
	SDK_DATE_HEADER             = "X-Sdk-Date"
	ACCEPT_HEADER               = "accept"
	ACCEPT_AUTHORIZATION_HEADER = "Authorization"
	CONTENT_LENGTH_HEADER       = "content-length"
	CONTENT_TYPE_HEADER         = "content-type"
	HOST_HEADER                 = "Host"
	SDK_HMAC_SHA256             = "SDK-HMAC-SHA256"
	SIGNATURE                   = "Signature"
	SDK_REQUEST                 = "sdk_request"
	SIGNED_HEADERS              = "SignedHeaders"
	CREDENTIAL                  = "Credential"
	SDK_AUTHORIZATION_HEADER    = "Authorization"
	SDK_X_AUTH_TOKEN            = "X-Auth-Token"
	X_PROJECT_ID                = "X-Project-Id"
)

Request header

Variables

This section is empty.

Functions

func IsHttpOk 

func IsHttpOk(RespCode int) (ok bool)

Types

type Bandwidth 

type Bandwidth struct {
	Name           string         `json:"name"`           // Specifies the bandwidth service.
	Size           int            `json:"size"`           // Specifies the bandwidth capacity.
	Id             string         `json:"id"`             // Specifies the bandwidth ID, which uniquely identifies the bandwidth.
	Share_type     string         `json:"share_type"`     // The value is PER, indicating that the bandwidth is exclusive.
	Publicip_info  []PublicipInfo `json:"publicip_info"`  // Specifies the elastic IP address of the bandwidth.
	Tenant_id      string         `json:"tenant_id"`      // Specifies the tenant ID of the user.
	Bandwidth_type string         `json:"bandwidth_type"` // Specifies the type of the bandwidth.
	Charge_mode    string         `json:"charge_mode"`    /*
		Specifies whether the charging is based on traffic or bandwidth.
		The value can be bandwidth or traffic. If the value is an empty
		character string or no value is returned, the charging is based on bandwidth.
	*/
}

Bandwidth fields

type BandwidthInfo 

type BandwidthInfo struct {
	Bandwidth Bandwidth `json:"bandwidth"`
}

Used to parse the Bandwidth response

type BandwidthsInfo 

type BandwidthsInfo struct {
	Bandwidths []Bandwidth `json:"bandwidths"`
}

Used to parse the Bandwidths response

type BaseDataStruct 

type BaseDataStruct struct {
	MapBodyContent map[string]interface{}
}

The base data struct

func (*BaseDataStruct) GetBodyContent 

func (baseDataStruct *BaseDataStruct) GetBodyContent() string

func (*BaseDataStruct) InitBase 

func (baseDataStruct *BaseDataStruct) InitBase()

type ClientConfiguration 

type ClientConfiguration struct {
	Endpoint    string // Server address
	ServiceName string // Service name
	Region      string // Region
}

Configuration

type ErrorInfo 

type ErrorInfo struct {
	Code        string `json:"code"`
	Description string `json:"message"`
}

Error message

type Image 

type Image struct {
	File   string `json:"file"`   // Specifies the URL for uploading and downloading the image file.
	Owner  string `json:"owner"`  // Specifies the tenant to which the image belongs.
	Id     string `json:"id"`     // Specifies the image ID.
	Size   int64  `json:"size"`   // This parameter is unavailable currently.
	Self   string `json:"self"`   // Specifies the URL of the image.
	Schema string `json:"schema"` // Specifies the image schema.
	Status string `json:"status"` /*
		Specifies the image status. The value can be active, queued, saving, d
		eleted, or killed. An image can be used only when it is in the active state.
	*/
	Tags       []string `json:"tags"`       // Specifies the image tag.
	Visibility string   `json:"visibility"` /*
		Specifies whether the image can be seen by other
		tenants. The value can be private or public.
	*/
	Name     string `json:"name"`     // Specifies the image name.
	Checksum string `json:"checksum"` // This parameter is unavailable currently.
	Deleted  bool   `json:"deleted"`  /*
		Specifies whether the image has been deleted.
		The value can be true or false.
	*/
	Protected bool `json:"protected"` /*
		Specifies whether the image is protected.
		A protected image cannot be deleted. The value can be true or false.
	*/
	Container_format string `json:"container_format"` // Specifies the container type.
	Min_ram          int    `json:"min_ram"`          // Specifies the minimum memory size (MB) required for running the image.
	Update_at        string `json:"update_at"`        // Specifies the time when the image was updated.
	Os_bit           string `json:"__os_bit"`         /*
		Specifies the system property of the operating system.
		The value can be 32 or 64.
	*/
	Os_version   string `json:"__os_version"`   // Specifies the operating system version.
	Description  string `json:"__description"`  // Provides supplementary information about an image.
	Disk_format  string `json:"disk_format"`    // Specifies the image format. Only the zvhd format is supported.
	IsRegistered string `json:"__isregistered"` /*
		Specifies whether the image has been registered.
		The value can be true or false.
	*/
	Platform string `json:"__platform"` /*
		Specifies the image platform type.
		The value can be Windows, Ubuntu, RedHat, SUSE, CentOS, or Other.
	*/
	Os_type string `json:"__os_type"` /*
		Specifies the operating system type.
		The value can be Linux, Windows, or Other.
	*/
	Min_disk         int    `json:"min_disk"`         // Specifies the minimum disk space (GB) required for running the image.
	Virtual_env_type string `json:"virtual_env_type"` /*
		Specifies the type of the environment where the image is used.
		If the image is used in FusionCompute, the value is FusionCompute.
	*/
	Image_source_type string `json:"__image_source_type"` /*
		Specifies the backend storage used by images.
		The value can be glance, nfs, or uds. The default value is glance.
	*/
	Imagetype string `json:"__imagetype"` /*
		Specifies the image type. The value can be gold,
		which indicates a public image, or private, which indicates a private image.
	*/
	Create_at         string `json:"created_at"`          // Specifies the time when the image was created.
	Virtual_size      int    `json:"virtual_size"`        // This parameter is unavailable currently.
	Deleted_at        string `json:"deleted_at"`          // Specifies the time when the image was deleted.
	Originalimagename string `json:"__originalimagename"` /*
		Specifies the ID of the parent image.
		If the image is a public image or a image that is created using a file,
		this value is left empty.
	*/
	Backup_id string `json:"__backup_id"` /*
		Specifies the backup ID. To create the a image using a backup,
		set the value to the backup ID. Otherwise, this value is left empty.
	*/
	Productcode    string `json:"__productcode"`    // Specifies the ID of the market image product.
	Image_location string `json:"__image_location"` // Specifies the location where the image is stored.
	Image_size     string `json:"__image_size"`     // Specifies the size of the image file (byte).
	Data_origin    string `json:"__data_origin"`    /*
		Specifies the image resource.
		If the image is a public image, this parameter is left empty.
	*/
}

Image response fields

type ImageInfo 

type ImageInfo struct {
	Images []Image `json:"images"`
}

Used to parse the Images response

type NeutronSecurityGroupRuleInfo 

type NeutronSecurityGroupRuleInfo struct {
	SecurityGroupRuleCreateInfo SecurityGroupRuleCreateInfo `json:"security_group_rule"`
}

Used to parse the SecurityGroupRuleCreateInfo response

type PublicipCreateData 

type PublicipCreateData struct {
	Id string `json:"id"` /*
		Specifies the ID of the elastic IP address,
		which uniquely identifies the elastic IP address.
	*/
	Status string `json:"status"` /*
		Specifies the status of the elastic IP address.
		The value can be FREEZED, BIND_ERROR, BINDING,
		PENDING_DELETE, PENDING_CREATE, NOTIFYING, NOTIFY_DELETE,
		PENDING_UPDATE, DOWN, ACTIVE, ELB, or ERROR.
	*/
	Type              string `json:"type"`              // Specifies the type of the elastic IP address.
	Public_ip_address string `json:"public_ip_address"` // Specifies the elastic IP address obtained.
	Tenant_id         string `json:"tenant_id"`         // Specifies the tenant ID of the operator.
	Create_time       string `json:"create_time"`       // Specifies the time applying for the elastic IP address.
	Bandwidth_size    int    `json:"bandwidth_size"`    // Specifies the bandwidth capacity.
}

PublicipCreateData response fields

type PublicipCreateDataInfo 

type PublicipCreateDataInfo struct {
	PublicipCreateData PublicipCreateData `json:"publicip"`
}

Used to parse the PublicipCreateData response

type PublicipInfo 

type PublicipInfo struct {
	Publicip_id string `json:"publicip_id"` /*
		Specifies the ID of the elastic IP address,
		which uniquely identifies the elastic IP address.*/
	Publicip_address string `json:"publicip_address"` // Specifies the elastic IP address.
	Publicip_type    string `json:"publicip_type"`    // Specifies the type of the elastic IP address.
}

Publicip fields

type PublicipUpdateData 

type PublicipUpdateData struct {
	Id string `json:"id"` /*
		Specifies the ID of the elastic IP address,
		which uniquely identifies the elastic IP address.
	*/
	Status string `json:"status"` /*
		Specifies the status of the elastic IP address.
		The value can be FREEZED, BIND_ERROR, BINDING,
		PENDING_DELETE, PENDING_CREATE, NOTIFYING, NOTIFY_DELETE,
		PENDING_UPDATE, DOWN, ACTIVE, ELB, or ERROR.
	*/
	Type              string `json:"type"`              // Specifies the type of the elastic IP address.
	Public_ip_address string `json:"public_ip_address"` // Specifies the elastic IP address obtained.
	Port_id           string `json:"port_id"`           // Specifies the ID of the VM NIC.
	Tenant_id         string `json:"tenant_id"`         // Specifies the tenant ID of the operator.
	Create_time       string `json:"create_time"`       // Specifies the time applying for the elastic IP address.
	Bandwidth_size    int    `json:"bandwidth_size"`    // Specifies the bandwidth capacity.
}

PublicipUpdateData response fields

type PublicipUpdateDataInfo 

type PublicipUpdateDataInfo struct {
	PublicipUpdateData PublicipUpdateData `json:"publicip"`
}

Used to parse the PublicipUpdateData response

type RequestParam 

type RequestParam struct {
	AK                 string // Access key
	SK                 string // Security key
	Token              string // Token
	Endpoint           string // Server address
	ServiceName        string // Service name
	Region             string // Region
	BodyContent        string // The string of body
	Method             string // Method
	RequestContentType string // Request content type
	AuthType           int    // Authorization mode
	Url                string // Http url
	Subproject_ID      string // Subproject ID
}

Request paramters

type Result 

type Result struct {
	Err              error             // Error
	ResponseCode     int               // Response code
	RespMessage      string            // Response message
	HeaderCollection map[string]string // Response Header
}

执行结果

type SecurityGroup 

type SecurityGroup struct {
	Name               string              `json:"name"`                 //	Specifies the name of the security group.
	Id                 string              `json:"id"`                   // Specifies the security group ID, which uniquely identifies the security group.
	Vpc_id             string              `json:"vpc_id"`               // Specifies the resource ID of the VPC to which the security group belongs.
	SecurityGroupRules []SecurityGroupRule `json:"security_group_rules"` /*
		Specifies the default security group rule, which ensures that hosts
		in the security group to communicate with one another.
	*/
}

SecurityGroup response fields

type SecurityGroupInfo 

type SecurityGroupInfo struct {
	SecurityGroup SecurityGroup `json:"security_group"`
}

Used to parse the SecurityGroup response

type SecurityGroupRule 

type SecurityGroupRule struct {
	Id                string `json:"id"`                // Specifies the ID of the security group rule.
	Security_group_id string `json:"security_group_id"` // Specifies the ID of the security group.
	Direction         string `json:"direction"`         /*
		Specifies the direction of access control.
		The value can be egress or ingress.
	*/
	Ethertype string `json:"ethertype"` /* Specifies the protocol used by IP addresses.
	The value can be IPv4 or IPv6.
	*/
	Protocol string `json:"protocol"` /*
		Specifies the protocol type.
		If the parameter is left empty, the security group supports all types of protocols.
		The value can be icmp, tcp, udp, or others.
	*/
	Port_range_min int `json:"port_range_min"` /*
		Specifies the start port.
		The value ranges from -1 to 65,535.
		The value must be less than or equal to the value of port_range_max.
		An empty value indicates all ports. If protocol is icmp, the value range
		 is determined by the A.2 ICMP-Port Range Relationship Table.
	*/
	Port_range_max int `json:"port_range_max"` /*
		Specifies the end port.
		The value ranges from -1 to 65,535.
		The value must be greater than or equal to the value of port_range_min.
		An empty value indicates all ports. If protocol is icmp, the value range
		is determined by the A.2 ICMP-Port Range Relationship Table.
	*/
	Remote_ip_perfix string `json:"remote_ip_prefix"` /*
		Specifies the remote IP address. If the access control direction is set to egress,
		the parameter specifies the source IP address. If the access control direction is
		set to ingress, the parameter specifies the destination IP address.
		The parameter is exclusive with parameter remote_group_id.
		The value can be in the CIDR format or IP addresses.
	*/
	Remote_group_id string `json:"remote_group_id"` /*
		Specifies the ID of the peer security group.
		The value is exclusive with parameter remote_ip_prefix.
	*/
}

SecurityGroupRule response fields

type SecurityGroupRuleCreateInfo 

type SecurityGroupRuleCreateInfo struct {
	Id                string `json:"id"`                // Specifies the ID of the security group rule.
	Tenant_id         string `json:"tenant_id"`         // Specifies the ID of the tenant.
	Security_group_id string `json:"security_group_id"` // Specifies the ID of the security group.
	Direction         string `json:"direction"`         /*
		Specifies the direction of access control.
		The value can be egress or ingress.
	*/
	Ethertype string `json:"ethertype"` /*
		Specifies the protocol used by IP addresses.
		The value can be IPv4 or IPv6.
	*/
	Protocol string `json:"protocol"` /*
		Specifies the protocol type.
		If the parameter is left empty, the security group supports all types of protocols.
		The value can be icmp, tcp, udp, or others.
	*/
	Port_range_min int `json:"port_range_min"` /*
		Specifies the start port.
		The value ranges from -1 to 65,535.
		The value must be less than or equal to the value of port_range_max.
	*/
	Port_range_max int `json:"port_range_max"` /*
		Specifies the end port.
		The value ranges from -1 to 65,535.
		The value must be greater than or equal to the value of port_range_min.
	*/
	Remote_ip_prefix string `json:"remote_ip_prefix"` /*
		Specifies the remote IP address. If the access control direction is set
		to egress, the parameter specifies the source IP address. If the access
		control direction is set to ingress, the parameter specifies the destination IP address.
		The parameter is exclusive with parameter remote_group_id.
		The value can be in the CIDR format or IP addresses.
	*/
	Remote_group_id string `json:"remote_group_id"` /*
		Specifies the ID of the peer security group.
		The value is exclusive with parameter remote_ip_prefix.
	*/
}

SecurityGroupRuleCreateInfo response fields

type SecurityGroupsInfo 

type SecurityGroupsInfo struct {
	SecurityGroups []SecurityGroup `json:"security_groups"`
}

Used to parse the SecurityGroups response

type Subnet 

type Subnet struct {
	Id                string `json:"id"`                // Specifies a resource ID in UUID format.
	Name              string `json:"name"`              // Specifies the name of the subnet.
	Cidr              string `json:"cidr"`              // Specifies the network segment of the subnet.
	Gateway_ip        string `json:"gateway_ip"`        // Specifies the gateway address of the subnet.
	Dhcp_enable       bool   `json:"dhcp_enable"`       // Specifies whether the DHCP function is enabled for the subnet.
	Primary_dns       string `json:"primary_dns"`       // Specifies the primary IP address of the DNS server on the subnet.
	Secondary_dns     string `json:"secondary_dns"`     // Specifies the secondary IP address of the DNS server on the subnet.
	Availability_zone string `json:"availability_zone"` // Specifies the ID of the AZ to which the subnet belongs.
	Vpc_id            string `json:"vpc_id"`            // Specifies the ID of the VPC to which the subnet belongs.
	Status            string `json:"status"`            // Specifies the status of the subnet.The value can be ACTIVE, DOWN, BUILD, ERROR, or DELETE.
}

Subnet response fields

type SubnetInfo 

type SubnetInfo struct {
	Subnet Subnet `json:"subnet"`
}

Used to parse the Subnet response

type SubnetsInfo 

type SubnetsInfo struct {
	Subnets []Subnet `json:"subnets"`
}

type Vpc 

type Vpc struct {
	Id   string `json:"id"`   // Specifies a resource ID in UUID format.
	Name string `json:"name"` /*
		Specifies the name of the VPC.
		The name must be unique for a tenant.
		The value is a string of 1 to 64 characters that contain letters, digits,
		underscores (_), and hyphens (-).
	*/
	Cidr string `json:"cidr"` /*
		Specifies the range of available subnets in the VPC.
		The value must be in CIDR format, for example, 192.168.0.0/16.
		The value ranges from 10.0.0.0/8 to 10.255.255.0/24, 172.16.0.0/12 to
		172.31.255.0/24, or 192.168.0.0/16 to 192.168.255.0/24.
	*/
	Status string `json:"status"` /*
		Specifies the status of the VPC.
		The value can be CREATING, OK, DOWN, PENDING_UPDATE, PENDING_DELETE, or ERROR.
	*/
	NoSecurityGroup bool `json:"noSecurityGroup"`
}

Vpc response fields

type VpcInfo 

type VpcInfo struct {
	Vpc Vpc `json:"vpc"`
}

Used to parse the Vpc response

Source Files

View all Source files

Directories

Path Synopsis
*Copyright 2015 Huawei Technologies Co., Ltd.
 *Copyright 2015 Huawei Technologies Co., Ltd.
*Copyright 2015 Huawei Technologies Co., Ltd.
 *Copyright 2015 Huawei Technologies Co., Ltd.
*Copyright 2015 Huawei Technologies Co., Ltd.
 *Copyright 2015 Huawei Technologies Co., Ltd.
*Copyright 2015 Huawei Technologies Co., Ltd.
 *Copyright 2015 Huawei Technologies Co., Ltd.
*Copyright 2015 Huawei Technologies Co., Ltd.
 *Copyright 2015 Huawei Technologies Co., Ltd.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.