config

Documentation

Index

• Constants

Constants

const (
	IOCFG2         = 0x06 // GDO2 Output Pin Configuration
	IOCFG1         = 0x2e // GDO1 Output Pin Configuration
	IOCFG0         = 0x07 // GDO0 Output Pin Configuration
	FIFOTHR        = 0x47 // RX FIFO and TX FIFO Thresholds
	SYNC1          = 0xd3 // Sync Word, High Byte
	SYNC0          = 0x91 // Sync Word, Low Byte
	PKTLEN         = 0x3d // Packet Length
	PKTCTRL1       = 0x04 // Packet Automation Control
	PKTCTRL0       = 0x05 // Packet Automation Control
	ADDR           = 0x00 // Device Address
	CHANNR         = 0x00 // Channel Number
	FSCTRL1        = 0x06 // Frequency Synthesizer Control
	FSCTRL0        = 0x00 // Frequency Synthesizer Control
	FREQ2          = 0x21 // Frequency Control Word, High Byte
	FREQ1          = 0x65 // Frequency Control Word, Middle Byte
	FREQ0          = 0x44 // Frequency Control Word, Low Byte
	MDMCFG4        = 0xf5 // Modem Configuration
	MDMCFG3        = 0x83 // Modem Configuration
	MDMCFG2        = 0x03 // Modem Configuration
	MDMCFG1        = 0x22 // Modem Configuration
	MDMCFG0        = 0xf8 // Modem Configuration
	DEVIATN        = 0x34 // Modem Deviation Setting
	MCSM2          = 0x07 // Main Radio Control State Machine Configuration
	MCSM1          = 0x3c // Main Radio Control State Machine Configuration
	MCSM0          = 0x18 // Main Radio Control State Machine Configuration
	FOCCFG         = 0x16 // Frequency Offset Compensation Configuration
	BSCFG          = 0x6c // Bit Synchronization Configuration
	AGCCTRL2       = 0x03 // AGC Control
	AGCCTRL1       = 0x40 // AGC Control
	AGCCTRL0       = 0x91 // AGC Control
	WOREVT1        = 0x87 // High Byte Event0 Timeout
	WOREVT0        = 0x6b // Low Byte Event0 Timeout
	WORCTRL        = 0xfb // Wake On Radio Control
	FREND1         = 0x56 // Front End RX Configuration
	FREND0         = 0x10 // Front End TX Configuration
	FSCAL3         = 0xe9 // Frequency Synthesizer Calibration
	FSCAL2         = 0x2a // Frequency Synthesizer Calibration
	FSCAL1         = 0x00 // Frequency Synthesizer Calibration
	FSCAL0         = 0x1f // Frequency Synthesizer Calibration
	RCCTRL1        = 0x41 // RC Oscillator Configuration
	RCCTRL0        = 0x00 // RC Oscillator Configuration
	FSTEST         = 0x59 // Frequency Synthesizer Calibration Control
	PTEST          = 0x7f // Production Test
	AGCTEST        = 0x3f // AGC Test
	TEST2          = 0x81 // Various Test Settings
	TEST1          = 0x35 // Various Test Settings
	TEST0          = 0x09 // Various Test Settings
	PARTNUM        = 0x00 // Chip ID
	VERSION        = 0x04 // Chip ID
	FREQEST        = 0x00 // Frequency Offset Estimate from Demodulator
	LQI            = 0x00 // Demodulator Estimate for Link Quality
	RSSI           = 0x00 // Received Signal Strength Indication
	MARCSTATE      = 0x00 // Main Radio Control State Machine State
	WORTIME1       = 0x00 // High Byte of WOR Time
	WORTIME0       = 0x00 // Low Byte of WOR Time
	PKTSTATUS      = 0x00 // Current GDOx Status and Packet Status
	VCO_VC_DAC     = 0x00 // Current Setting from PLL Calibration Module
	TXBYTES        = 0x00 // Underflow and Number of Bytes
	RXBYTES        = 0x00 // Overflow and Number of Bytes
	RCCTRL1_STATUS = 0x00 // Last RC Oscillator Calibration Result
	RCCTRL0_STATUS = 0x00 // Last RC Oscillator Calibration Result
)

Rf settings for CC1101