api

package
v0.8.0-rc1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 27, 2017 License: MPL-2.0 Imports: 22 Imported by: 8,984

README

Consul API client

This package provides the api package which attempts to provide programmatic access to the full Consul API.

Currently, all of the Consul APIs included in version 0.6.0 are supported.

Documentation

The full documentation is available on Godoc

Usage

Below is an example of using the Consul client:

// Get a new client
client, err := api.NewClient(api.DefaultConfig())
if err != nil {
    panic(err)
}

// Get a handle to the KV API
kv := client.KV()

// PUT a new KV pair
p := &api.KVPair{Key: "foo", Value: []byte("test")}
_, err = kv.Put(p, nil)
if err != nil {
    panic(err)
}

// Lookup the pair
pair, _, err := kv.Get("foo", nil)
if err != nil {
    panic(err)
}
fmt.Printf("KV: %v", pair)

Documentation

Overview

The /v1/operator/area endpoints are available only in Consul Enterprise and interact with its network area subsystem. Network areas are used to link together Consul servers in different Consul datacenters. With network areas, Consul datacenters can be linked together in ways other than a fully-connected mesh, as is required for Consul's WAN.

Index

Constants

View Source 
const (
	// ACLCLientType is the client type token
	ACLClientType = "client"

	// ACLManagementType is the management type token
	ACLManagementType = "management"
)
View Source 
const (
	// HTTPAddrEnvName defines an environment variable name which sets
	// the HTTP address if there is no -http-addr specified.
	HTTPAddrEnvName = "CONSUL_HTTP_ADDR"

	// HTTPTokenEnvName defines an environment variable name which sets
	// the HTTP token.
	HTTPTokenEnvName = "CONSUL_HTTP_TOKEN"

	// HTTPAuthEnvName defines an environment variable name which sets
	// the HTTP authentication header.
	HTTPAuthEnvName = "CONSUL_HTTP_AUTH"

	// HTTPSSLEnvName defines an environment variable name which sets
	// whether or not to use HTTPS.
	HTTPSSLEnvName = "CONSUL_HTTP_SSL"

	// HTTPSSLVerifyEnvName defines an environment variable name which sets
	// whether or not to disable certificate checking.
	HTTPSSLVerifyEnvName = "CONSUL_HTTP_SSL_VERIFY"
)
View Source 
const (
	// HealthAny is special, and is used as a wild card,
	// not as a specific state.
	HealthAny      = "any"
	HealthPassing  = "passing"
	HealthWarning  = "warning"
	HealthCritical = "critical"
	HealthMaint    = "maintenance"
)
View Source 
const (
	// NodeMaint is the special key set by a node in maintenance mode.
	NodeMaint = "_node_maintenance"

	// ServiceMaintPrefix is the prefix for a service in maintenance mode.
	ServiceMaintPrefix = "_service_maintenance:"
)
View Source 
const (
	// DefaultLockSessionName is the Session Name we assign if none is provided
	DefaultLockSessionName = "Consul API Lock"

	// DefaultLockSessionTTL is the default session TTL if no Session is provided
	// when creating a new Lock. This is used because we do not have another
	// other check to depend upon.
	DefaultLockSessionTTL = "15s"

	// DefaultLockWaitTime is how long we block for at a time to check if lock
	// acquisition is possible. This affects the minimum time it takes to cancel
	// a Lock acquisition.
	DefaultLockWaitTime = 15 * time.Second

	// DefaultLockRetryTime is how long we wait after a failed lock acquisition
	// before attempting to do the lock again. This is so that once a lock-delay
	// is in effect, we do not hot loop retrying the acquisition.
	DefaultLockRetryTime = 5 * time.Second

	// DefaultMonitorRetryTime is how long we wait after a failed monitor check
	// of a lock (500 response code). This allows the monitor to ride out brief
	// periods of unavailability, subject to the MonitorRetries setting in the
	// lock options which is by default set to 0, disabling this feature. This
	// affects locks and semaphores.
	DefaultMonitorRetryTime = 2 * time.Second

	// LockFlagValue is a magic flag we set to indicate a key
	// is being used for a lock. It is used to detect a potential
	// conflict with a semaphore.
	LockFlagValue = 0x2ddccbc058a50c18
)
View Source 
const (
	// DefaultSemaphoreSessionName is the Session Name we assign if none is provided
	DefaultSemaphoreSessionName = "Consul API Semaphore"

	// DefaultSemaphoreSessionTTL is the default session TTL if no Session is provided
	// when creating a new Semaphore. This is used because we do not have another
	// other check to depend upon.
	DefaultSemaphoreSessionTTL = "15s"

	// DefaultSemaphoreWaitTime is how long we block for at a time to check if semaphore
	// acquisition is possible. This affects the minimum time it takes to cancel
	// a Semaphore acquisition.
	DefaultSemaphoreWaitTime = 15 * time.Second

	// DefaultSemaphoreKey is the key used within the prefix to
	// use for coordination between all the contenders.
	DefaultSemaphoreKey = ".lock"

	// SemaphoreFlagValue is a magic flag we set to indicate a key
	// is being used for a semaphore. It is used to detect a potential
	// conflict with a lock.
	SemaphoreFlagValue = 0xe0f69a2baa414de0
)
View Source 
const (
	// SessionBehaviorRelease is the default behavior and causes
	// all associated locks to be released on session invalidation.
	SessionBehaviorRelease = "release"

	// SessionBehaviorDelete is new in Consul 0.5 and changes the
	// behavior to delete all associated locks on session invalidation.
	// It can be used in a way similar to Ephemeral Nodes in ZooKeeper.
	SessionBehaviorDelete = "delete"
)

Variables

View Source 
var (
	// ErrLockHeld is returned if we attempt to double lock
	ErrLockHeld = fmt.Errorf("Lock already held")

	// ErrLockNotHeld is returned if we attempt to unlock a lock
	// that we do not hold.
	ErrLockNotHeld = fmt.Errorf("Lock not held")

	// ErrLockInUse is returned if we attempt to destroy a lock
	// that is in use.
	ErrLockInUse = fmt.Errorf("Lock in use")

	// ErrLockConflict is returned if the flags on a key
	// used for a lock do not match expectation
	ErrLockConflict = fmt.Errorf("Existing key does not match lock use")
)
View Source 
var (
	// ErrSemaphoreHeld is returned if we attempt to double lock
	ErrSemaphoreHeld = fmt.Errorf("Semaphore already held")

	// ErrSemaphoreNotHeld is returned if we attempt to unlock a semaphore
	// that we do not hold.
	ErrSemaphoreNotHeld = fmt.Errorf("Semaphore not held")

	// ErrSemaphoreInUse is returned if we attempt to destroy a semaphore
	// that is in use.
	ErrSemaphoreInUse = fmt.Errorf("Semaphore in use")

	// ErrSemaphoreConflict is returned if the flags on a key
	// used for a semaphore do not match expectation
	ErrSemaphoreConflict = fmt.Errorf("Existing key does not match semaphore use")
)
View Source 
var ErrSessionExpired = errors.New("session expired")

Functions

func IsServerError added in v0.6.1 

func IsServerError(err error) bool

IsServerError returns true for 500 errors from the Consul servers, these are usually retryable at a later time.

func SetupTLSConfig added in v0.7.0 

func SetupTLSConfig(tlsConfig *TLSConfig) (*tls.Config, error)

TLSConfig is used to generate a TLSClientConfig that's useful for talking to Consul using TLS.

Types

type ACL 

type ACL struct {
	// contains filtered or unexported fields
}

ACL can be used to query the ACL endpoints

func (*ACL) Clone 

func (a *ACL) Clone(id string, q *WriteOptions) (string, *WriteMeta, error)

Clone is used to return a new token cloned from an existing one

func (*ACL) Create 

func (a *ACL) Create(acl *ACLEntry, q *WriteOptions) (string, *WriteMeta, error)

Create is used to generate a new token with the given parameters

func (*ACL) Destroy 

func (a *ACL) Destroy(id string, q *WriteOptions) (*WriteMeta, error)

Destroy is used to destroy a given ACL token ID

func (*ACL) Info 

func (a *ACL) Info(id string, q *QueryOptions) (*ACLEntry, *QueryMeta, error)

Info is used to query for information about an ACL token

func (*ACL) List 

func (a *ACL) List(q *QueryOptions) ([]*ACLEntry, *QueryMeta, error)

List is used to get all the ACL tokens

func (*ACL) Update 

func (a *ACL) Update(acl *ACLEntry, q *WriteOptions) (*WriteMeta, error)

Update is used to update the rules of an existing token

type ACLEntry 

type ACLEntry struct {
	CreateIndex uint64
	ModifyIndex uint64
	ID          string
	Name        string
	Type        string
	Rules       string
}

ACLEntry is used to represent an ACL entry

type Agent 

type Agent struct {
	// contains filtered or unexported fields
}

Agent can be used to query the Agent endpoints

func (*Agent) CheckDeregister 

func (a *Agent) CheckDeregister(checkID string) error

CheckDeregister is used to deregister a check with the local agent

func (*Agent) CheckRegister 

func (a *Agent) CheckRegister(check *AgentCheckRegistration) error

CheckRegister is used to register a new check with the local agent

func (*Agent) Checks 

func (a *Agent) Checks() (map[string]*AgentCheck, error)

Checks returns the locally registered checks

func (*Agent) DisableNodeMaintenance 

func (a *Agent) DisableNodeMaintenance() error

DisableNodeMaintenance toggles node maintenance mode off for the agent we are connected to.

func (*Agent) DisableServiceMaintenance 

func (a *Agent) DisableServiceMaintenance(serviceID string) error

DisableServiceMaintenance toggles service maintenance mode off for the given service ID.

func (*Agent) EnableNodeMaintenance 

func (a *Agent) EnableNodeMaintenance(reason string) error

EnableNodeMaintenance toggles node maintenance mode on for the agent we are connected to.

func (*Agent) EnableServiceMaintenance 

func (a *Agent) EnableServiceMaintenance(serviceID, reason string) error

EnableServiceMaintenance toggles service maintenance mode on for the given service ID.

func (*Agent) FailTTL 

func (a *Agent) FailTTL(checkID, note string) error

FailTTL is used to set a TTL check to the failing state.

DEPRECATION NOTICE: This interface is deprecated in favor of UpdateTTL(). The client interface will be removed in 0.8 or changed to use UpdateTTL()'s endpoint and the server endpoints will be removed in 0.9.

func (*Agent) ForceLeave 

func (a *Agent) ForceLeave(node string) error

ForceLeave is used to have the agent eject a failed node

func (*Agent) Join 

func (a *Agent) Join(addr string, wan bool) error

Join is used to instruct the agent to attempt a join to another cluster member

func (*Agent) Leave added in v0.7.2 

func (a *Agent) Leave() error

Leave is used to have the agent gracefully leave the cluster and shutdown

func (*Agent) Members 

func (a *Agent) Members(wan bool) ([]*AgentMember, error)

Members returns the known gossip members. The WAN flag can be used to query a server for WAN members.

func (*Agent) Monitor added in v0.7.2 

func (a *Agent) Monitor(loglevel string, stopCh chan struct{}, q *QueryOptions) (chan string, error)

Monitor returns a channel which will receive streaming logs from the agent Providing a non-nil stopCh can be used to close the connection and stop the log stream

func (*Agent) NodeName 

func (a *Agent) NodeName() (string, error)

NodeName is used to get the node name of the agent

func (*Agent) PassTTL 

func (a *Agent) PassTTL(checkID, note string) error

PassTTL is used to set a TTL check to the passing state.

DEPRECATION NOTICE: This interface is deprecated in favor of UpdateTTL(). The client interface will be removed in 0.8 or changed to use UpdateTTL()'s endpoint and the server endpoints will be removed in 0.9.

func (*Agent) Reload added in v0.7.2 

func (a *Agent) Reload() error

Reload triggers a configuration reload for the agent we are connected to.

func (*Agent) Self 

func (a *Agent) Self() (map[string]map[string]interface{}, error)

Self is used to query the agent we are speaking to for information about itself

func (*Agent) ServiceDeregister 

func (a *Agent) ServiceDeregister(serviceID string) error

ServiceDeregister is used to deregister a service with the local agent

func (*Agent) ServiceRegister 

func (a *Agent) ServiceRegister(service *AgentServiceRegistration) error

ServiceRegister is used to register a new service with the local agent

func (*Agent) Services 

func (a *Agent) Services() (map[string]*AgentService, error)

Services returns the locally registered services

func (*Agent) UpdateTTL 

func (a *Agent) UpdateTTL(checkID, output, status string) error

UpdateTTL is used to update the TTL of a check. This uses the newer API that was introduced in Consul 0.6.4 and later. We translate the old status strings for compatibility (though a newer version of Consul will still be required to use this API).

func (*Agent) WarnTTL 

func (a *Agent) WarnTTL(checkID, note string) error

WarnTTL is used to set a TTL check to the warning state.

DEPRECATION NOTICE: This interface is deprecated in favor of UpdateTTL(). The client interface will be removed in 0.8 or changed to use UpdateTTL()'s endpoint and the server endpoints will be removed in 0.9.

type AgentCheck 

type AgentCheck struct {
	Node        string
	CheckID     string
	Name        string
	Status      string
	Notes       string
	Output      string
	ServiceID   string
	ServiceName string
}

AgentCheck represents a check known to the agent

type AgentCheckRegistration 

type AgentCheckRegistration struct {
	ID        string `json:",omitempty"`
	Name      string `json:",omitempty"`
	Notes     string `json:",omitempty"`
	ServiceID string `json:",omitempty"`
	AgentServiceCheck
}

AgentCheckRegistration is used to register a new check

type AgentMember 

type AgentMember struct {
	Name        string
	Addr        string
	Port        uint16
	Tags        map[string]string
	Status      int
	ProtocolMin uint8
	ProtocolMax uint8
	ProtocolCur uint8
	DelegateMin uint8
	DelegateMax uint8
	DelegateCur uint8
}

AgentMember represents a cluster member known to the agent

type AgentService 

type AgentService struct {
	ID                string
	Service           string
	Tags              []string
	Port              int
	Address           string
	EnableTagOverride bool
}

AgentService represents a service known to the agent

type AgentServiceCheck 

type AgentServiceCheck struct {
	Script            string `json:",omitempty"`
	DockerContainerID string `json:",omitempty"`
	Shell             string `json:",omitempty"` // Only supported for Docker.
	Interval          string `json:",omitempty"`
	Timeout           string `json:",omitempty"`
	TTL               string `json:",omitempty"`
	HTTP              string `json:",omitempty"`
	TCP               string `json:",omitempty"`
	Status            string `json:",omitempty"`
	Notes             string `json:",omitempty"`
	TLSSkipVerify     bool   `json:",omitempty"`

	// In Consul 0.7 and later, checks that are associated with a service
	// may also contain this optional DeregisterCriticalServiceAfter field,
	// which is a timeout in the same Go time format as Interval and TTL. If
	// a check is in the critical state for more than this configured value,
	// then its associated service (and all of its associated checks) will
	// automatically be deregistered.
	DeregisterCriticalServiceAfter string `json:",omitempty"`
}

AgentServiceCheck is used to define a node or service level check

type AgentServiceChecks 

type AgentServiceChecks []*AgentServiceCheck

type AgentServiceRegistration 

type AgentServiceRegistration struct {
	ID                string   `json:",omitempty"`
	Name              string   `json:",omitempty"`
	Tags              []string `json:",omitempty"`
	Port              int      `json:",omitempty"`
	Address           string   `json:",omitempty"`
	EnableTagOverride bool     `json:",omitempty"`
	Check             *AgentServiceCheck
	Checks            AgentServiceChecks
}

AgentServiceRegistration is used to register a new service

type Area added in v0.8.0 

type Area struct {
	// ID is this identifier for an area (a UUID). This must be left empty
	// when creating a new area.
	ID string

	// PeerDatacenter is the peer Consul datacenter that will make up the
	// other side of this network area. Network areas always involve a pair
	// of datacenters: the datacenter where the area was created, and the
	// peer datacenter. This is required.
	PeerDatacenter string

	// RetryJoin specifies the address of Consul servers to join to, such as
	// an IPs or hostnames with an optional port number. This is optional.
	RetryJoin []string
}

Area defines a network area.

type AreaJoinResponse added in v0.8.0 

type AreaJoinResponse struct {
	// The address that was joined.
	Address string

	// Whether or not the join was a success.
	Joined bool

	// If we couldn't join, this is the message with information.
	Error string
}

AreaJoinResponse is returned when a join occurs and gives the result for each address.

type AutopilotConfiguration added in v0.8.0 

type AutopilotConfiguration struct {
	// CleanupDeadServers controls whether to remove dead servers from the Raft
	// peer list when a new server joins
	CleanupDeadServers bool

	// LastContactThreshold is the limit on the amount of time a server can go
	// without leader contact before being considered unhealthy.
	LastContactThreshold *ReadableDuration

	// MaxTrailingLogs is the amount of entries in the Raft Log that a server can
	// be behind before being considered unhealthy.
	MaxTrailingLogs uint64

	// ServerStabilizationTime is the minimum amount of time a server must be
	// in a stable, healthy state before it can be added to the cluster. Only
	// applicable with Raft protocol version 3 or higher.
	ServerStabilizationTime *ReadableDuration

	// (Enterprise-only) RedundancyZoneTag is the node tag to use for separating
	// servers into zones for redundancy. If left blank, this feature will be disabled.
	RedundancyZoneTag string

	// (Enterprise-only) DisableUpgradeMigration will disable Autopilot's upgrade migration
	// strategy of waiting until enough newer-versioned servers have been added to the
	// cluster before promoting them to voters.
	DisableUpgradeMigration bool

	// CreateIndex holds the index corresponding the creation of this configuration.
	// This is a read-only field.
	CreateIndex uint64

	// ModifyIndex will be set to the index of the last update when retrieving the
	// Autopilot configuration. Resubmitting a configuration with
	// AutopilotCASConfiguration will perform a check-and-set operation which ensures
	// there hasn't been a subsequent update since the configuration was retrieved.
	ModifyIndex uint64
}

AutopilotConfiguration is used for querying/setting the Autopilot configuration. Autopilot helps manage operator tasks related to Consul servers like removing failed servers from the Raft quorum.

type Catalog 

type Catalog struct {
	// contains filtered or unexported fields
}

Catalog can be used to query the Catalog endpoints

func (*Catalog) Datacenters 

func (c *Catalog) Datacenters() ([]string, error)

Datacenters is used to query for all the known datacenters

func (*Catalog) Deregister 

func (c *Catalog) Deregister(dereg *CatalogDeregistration, q *WriteOptions) (*WriteMeta, error)

func (*Catalog) Node 

func (c *Catalog) Node(node string, q *QueryOptions) (*CatalogNode, *QueryMeta, error)

Node is used to query for service information about a single node

func (*Catalog) Nodes 

func (c *Catalog) Nodes(q *QueryOptions) ([]*Node, *QueryMeta, error)

Nodes is used to query all the known nodes

func (*Catalog) Register 

func (c *Catalog) Register(reg *CatalogRegistration, q *WriteOptions) (*WriteMeta, error)

func (*Catalog) Service 

func (c *Catalog) Service(service, tag string, q *QueryOptions) ([]*CatalogService, *QueryMeta, error)

Service is used to query catalog entries for a given service

func (*Catalog) Services 

func (c *Catalog) Services(q *QueryOptions) (map[string][]string, *QueryMeta, error)

Services is used to query for all known services

type CatalogDeregistration 

type CatalogDeregistration struct {
	Node       string
	Address    string // Obsolete.
	Datacenter string
	ServiceID  string
	CheckID    string
}

type CatalogNode 

type CatalogNode struct {
	Node     *Node
	Services map[string]*AgentService
}

type CatalogRegistration 

type CatalogRegistration struct {
	ID              string
	Node            string
	Address         string
	TaggedAddresses map[string]string
	NodeMeta        map[string]string
	Datacenter      string
	Service         *AgentService
	Check           *AgentCheck
}

type CatalogService 

type CatalogService struct {
	ID                       string
	Node                     string
	Address                  string
	TaggedAddresses          map[string]string
	NodeMeta                 map[string]string
	ServiceID                string
	ServiceName              string
	ServiceAddress           string
	ServiceTags              []string
	ServicePort              int
	ServiceEnableTagOverride bool
	CreateIndex              uint64
	ModifyIndex              uint64
}

type Client 

type Client struct {
	// contains filtered or unexported fields
}

Client provides a client to the Consul API

func NewClient 

func NewClient(config *Config) (*Client, error)

NewClient returns a new client

func (*Client) ACL 

func (c *Client) ACL() *ACL

ACL returns a handle to the ACL endpoints

func (*Client) Agent 

func (c *Client) Agent() *Agent

Agent returns a handle to the agent endpoints

func (*Client) Catalog 

func (c *Client) Catalog() *Catalog

Catalog returns a handle to the catalog endpoints

func (*Client) Coordinate added in v0.6.0 

func (c *Client) Coordinate() *Coordinate

Coordinate returns a handle to the coordinate endpoints

func (*Client) Event 

func (c *Client) Event() *Event

Event returns a handle to the event endpoints

func (*Client) Health 

func (c *Client) Health() *Health

Health returns a handle to the health endpoints

func (*Client) KV 

func (c *Client) KV() *KV

KV is used to return a handle to the K/V apis

func (*Client) LockKey 

func (c *Client) LockKey(key string) (*Lock, error)

LockKey returns a handle to a lock struct which can be used to acquire and release the mutex. The key used must have write permissions.

func (*Client) LockOpts 

func (c *Client) LockOpts(opts *LockOptions) (*Lock, error)

LockOpts returns a handle to a lock struct which can be used to acquire and release the mutex. The key used must have write permissions.

func (*Client) Operator added in v0.7.0 

func (c *Client) Operator() *Operator

Operator returns a handle to the operator endpoints.

func (*Client) PreparedQuery added in v0.6.0 

func (c *Client) PreparedQuery() *PreparedQuery

PreparedQuery returns a handle to the prepared query endpoints.

func (*Client) Raw 

func (c *Client) Raw() *Raw

Raw returns a handle to query endpoints

func (*Client) SemaphoreOpts 

func (c *Client) SemaphoreOpts(opts *SemaphoreOptions) (*Semaphore, error)

SemaphoreOpts is used to create a Semaphore with the given options. The prefix must have write privileges, and the limit must be agreed upon by all contenders. If a Session is not provided, one will be created.

func (*Client) SemaphorePrefix 

func (c *Client) SemaphorePrefix(prefix string, limit int) (*Semaphore, error)

SemaphorePrefix is used to created a Semaphore which will operate at the given KV prefix and uses the given limit for the semaphore. The prefix must have write privileges, and the limit must be agreed upon by all contenders.

func (*Client) Session 

func (c *Client) Session() *Session

Session returns a handle to the session endpoints

func (*Client) Snapshot added in v0.7.1 

func (c *Client) Snapshot() *Snapshot

Snapshot returns a handle that exposes the snapshot endpoints.

func (*Client) Status 

func (c *Client) Status() *Status

Status returns a handle to the status endpoints

type Config 

type Config struct {
	// Address is the address of the Consul server
	Address string

	// Scheme is the URI scheme for the Consul server
	Scheme string

	// Datacenter to use. If not provided, the default agent datacenter is used.
	Datacenter string

	// HttpClient is the client to use. Default will be
	// used if not provided.
	HttpClient *http.Client

	// HttpAuth is the auth info to use for http access.
	HttpAuth *HttpBasicAuth

	// WaitTime limits how long a Watch will block. If not provided,
	// the agent default values will be used.
	WaitTime time.Duration

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string
}

Config is used to configure the creation of a client

func DefaultConfig 

func DefaultConfig() *Config

DefaultConfig returns a default configuration for the client. By default this will pool and reuse idle connections to Consul. If you have a long-lived client object, this is the desired behavior and should make the most efficient use of the connections to Consul. If you don't reuse a client object , which is not recommended, then you may notice idle connections building up over time. To avoid this, use the DefaultNonPooledConfig() instead.

func DefaultNonPooledConfig added in v0.6.4 

func DefaultNonPooledConfig() *Config

DefaultNonPooledConfig returns a default configuration for the client which does not pool connections. This isn't a recommended configuration because it will reconnect to Consul on every request, but this is useful to avoid the accumulation of idle connections if you make many client objects during the lifetime of your application.

type Coordinate added in v0.6.0 

type Coordinate struct {
	// contains filtered or unexported fields
}

Coordinate can be used to query the coordinate endpoints

func (*Coordinate) Datacenters added in v0.6.0 

func (c *Coordinate) Datacenters() ([]*CoordinateDatacenterMap, error)

Datacenters is used to return the coordinates of all the servers in the WAN pool.

func (*Coordinate) Nodes added in v0.6.0 

func (c *Coordinate) Nodes(q *QueryOptions) ([]*CoordinateEntry, *QueryMeta, error)

Nodes is used to return the coordinates of all the nodes in the LAN pool.

type CoordinateDatacenterMap added in v0.6.0 

type CoordinateDatacenterMap struct {
	Datacenter  string
	AreaID      string
	Coordinates []CoordinateEntry
}

CoordinateDatacenterMap has the coordinates for servers in a given datacenter and area. Network coordinates are only compatible within the same area.

type CoordinateEntry added in v0.6.0 

type CoordinateEntry struct {
	Node  string
	Coord *coordinate.Coordinate
}

CoordinateEntry represents a node and its associated network coordinate.

type Event 

type Event struct {
	// contains filtered or unexported fields
}

Event can be used to query the Event endpoints

func (*Event) Fire 

func (e *Event) Fire(params *UserEvent, q *WriteOptions) (string, *WriteMeta, error)

Fire is used to fire a new user event. Only the Name, Payload and Filters are respected. This returns the ID or an associated error. Cross DC requests are supported.

func (*Event) IDToIndex 

func (e *Event) IDToIndex(uuid string) uint64

IDToIndex is a bit of a hack. This simulates the index generation to convert an event ID into a WaitIndex.

func (*Event) List 

func (e *Event) List(name string, q *QueryOptions) ([]*UserEvent, *QueryMeta, error)

List is used to get the most recent events an agent has received. This list can be optionally filtered by the name. This endpoint supports quasi-blocking queries. The index is not monotonic, nor does it provide provide LastContact or KnownLeader.

type Health 

type Health struct {
	// contains filtered or unexported fields
}

Health can be used to query the Health endpoints

func (*Health) Checks 

func (h *Health) Checks(service string, q *QueryOptions) (HealthChecks, *QueryMeta, error)

Checks is used to return the checks associated with a service

func (*Health) Node 

func (h *Health) Node(node string, q *QueryOptions) (HealthChecks, *QueryMeta, error)

Node is used to query for checks belonging to a given node

func (*Health) Service 

func (h *Health) Service(service, tag string, passingOnly bool, q *QueryOptions) ([]*ServiceEntry, *QueryMeta, error)

Service is used to query health information along with service info for a given service. It can optionally do server-side filtering on a tag or nodes with passing health checks only.

func (*Health) State 

func (h *Health) State(state string, q *QueryOptions) (HealthChecks, *QueryMeta, error)

State is used to retrieve all the checks in a given state. The wildcard "any" state can also be used for all checks.

type HealthCheck 

type HealthCheck struct {
	Node        string
	CheckID     string
	Name        string
	Status      string
	Notes       string
	Output      string
	ServiceID   string
	ServiceName string
}

HealthCheck is used to represent a single check

type HealthChecks added in v0.7.2 

type HealthChecks []*HealthCheck

HealthChecks is a collection of HealthCheck structs.

func (HealthChecks) AggregatedStatus added in v0.7.2 

func (c HealthChecks) AggregatedStatus() string

AggregatedStatus returns the "best" status for the list of health checks. Because a given entry may have many service and node-level health checks attached, this function determines the best representative of the status as as single string using the following heuristic: 

maintenance > critical > warning > passing

type HttpBasicAuth 

type HttpBasicAuth struct {
	// Username to use for HTTP Basic Authentication
	Username string

	// Password to use for HTTP Basic Authentication
	Password string
}

HttpBasicAuth is used to authenticate http client with HTTP Basic Authentication

type KV 

type KV struct {
	// contains filtered or unexported fields
}

KV is used to manipulate the K/V API

func (*KV) Acquire 

func (k *KV) Acquire(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

Acquire is used for a lock acquisition operation. The Key, Flags, Value and Session are respected. Returns true on success or false on failures.

func (*KV) CAS 

func (k *KV) CAS(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

CAS is used for a Check-And-Set operation. The Key, ModifyIndex, Flags and Value are respected. Returns true on success or false on failures.

func (*KV) Delete 

func (k *KV) Delete(key string, w *WriteOptions) (*WriteMeta, error)

Delete is used to delete a single key

func (*KV) DeleteCAS 

func (k *KV) DeleteCAS(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

DeleteCAS is used for a Delete Check-And-Set operation. The Key and ModifyIndex are respected. Returns true on success or false on failures.

func (*KV) DeleteTree 

func (k *KV) DeleteTree(prefix string, w *WriteOptions) (*WriteMeta, error)

DeleteTree is used to delete all keys under a prefix

func (*KV) Get 

func (k *KV) Get(key string, q *QueryOptions) (*KVPair, *QueryMeta, error)

Get is used to lookup a single key. The returned pointer to the KVPair will be nil if the key does not exist.

func (*KV) Keys 

func (k *KV) Keys(prefix, separator string, q *QueryOptions) ([]string, *QueryMeta, error)

Keys is used to list all the keys under a prefix. Optionally, a separator can be used to limit the responses.

func (*KV) List 

func (k *KV) List(prefix string, q *QueryOptions) (KVPairs, *QueryMeta, error)

List is used to lookup all keys under a prefix

func (*KV) Put 

func (k *KV) Put(p *KVPair, q *WriteOptions) (*WriteMeta, error)

Put is used to write a new value. Only the Key, Flags and Value is respected.

func (*KV) Release 

func (k *KV) Release(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

Release is used for a lock release operation. The Key, Flags, Value and Session are respected. Returns true on success or false on failures.

func (*KV) Txn added in v0.7.0 

func (k *KV) Txn(txn KVTxnOps, q *QueryOptions) (bool, *KVTxnResponse, *QueryMeta, error)

Txn is used to apply multiple KV operations in a single, atomic transaction.

Note that Go will perform the required base64 encoding on the values automatically because the type is a byte slice. Transactions are defined as a list of operations to perform, using the KVOp constants and KVTxnOp structure to define operations. If any operation fails, none of the changes are applied to the state store. Note that this hides the internal raw transaction interface and munges the input and output types into KV-specific ones for ease of use. If there are more non-KV operations in the future we may break out a new transaction API client, but it will be easy to keep this KV-specific variant supported.

Even though this is generally a write operation, we take a QueryOptions input and return a QueryMeta output. If the transaction contains only read ops, then Consul will fast-path it to a different endpoint internally which supports consistency controls, but not blocking. If there are write operations then the request will always be routed through raft and any consistency settings will be ignored.

Here's an example: 

ops := KVTxnOps{
    &KVTxnOp{
        Verb:    KVLock,
        Key:     "test/lock",
        Session: "adf4238a-882b-9ddc-4a9d-5b6758e4159e",
        Value:   []byte("hello"),
    },
    &KVTxnOp{
        Verb:    KVGet,
        Key:     "another/key",
    },
}

ok, response, _, err := kv.Txn(&ops, nil)

If there is a problem making the transaction request then an error will be returned. Otherwise, the ok value will be true if the transaction succeeded or false if it was rolled back. The response is a structured return value which will have the outcome of the transaction. Its Results member will have entries for each operation. Deleted keys will have a nil entry in the, and to save space, the Value of each key in the Results will be nil unless the operation is a KVGet. If the transaction was rolled back, the Errors member will have entries referencing the index of the operation that failed along with an error message.

type KVOp added in v0.7.0 

type KVOp string

KVOp constants give possible operations available in a KVTxn. 

const (
	KVSet          KVOp = "set"
	KVDelete       KVOp = "delete"
	KVDeleteCAS    KVOp = "delete-cas"
	KVDeleteTree   KVOp = "delete-tree"
	KVCAS          KVOp = "cas"
	KVLock         KVOp = "lock"
	KVUnlock       KVOp = "unlock"
	KVGet          KVOp = "get"
	KVGetTree      KVOp = "get-tree"
	KVCheckSession KVOp = "check-session"
	KVCheckIndex   KVOp = "check-index"
)

type KVPair 

type KVPair struct {
	// Key is the name of the key. It is also part of the URL path when accessed
	// via the API.
	Key string

	// CreateIndex holds the index corresponding the creation of this KVPair. This
	// is a read-only field.
	CreateIndex uint64

	// ModifyIndex is used for the Check-And-Set operations and can also be fed
	// back into the WaitIndex of the QueryOptions in order to perform blocking
	// queries.
	ModifyIndex uint64

	// LockIndex holds the index corresponding to a lock on this key, if any. This
	// is a read-only field.
	LockIndex uint64

	// Flags are any user-defined flags on the key. It is up to the implementer
	// to check these values, since Consul does not treat them specially.
	Flags uint64

	// Value is the value for the key. This can be any value, but it will be
	// base64 encoded upon transport.
	Value []byte

	// Session is a string representing the ID of the session. Any other
	// interactions with this key over the same session must specify the same
	// session ID.
	Session string
}

KVPair is used to represent a single K/V entry

type KVPairs 

type KVPairs []*KVPair

KVPairs is a list of KVPair objects

type KVTxnOp added in v0.7.0 

type KVTxnOp struct {
	Verb    KVOp
	Key     string
	Value   []byte
	Flags   uint64
	Index   uint64
	Session string
}

KVTxnOp defines a single operation inside a transaction.

type KVTxnOps added in v0.7.0 

type KVTxnOps []*KVTxnOp

KVTxnOps defines a set of operations to be performed inside a single transaction.

type KVTxnResponse added in v0.7.0 

type KVTxnResponse struct {
	Results []*KVPair
	Errors  TxnErrors
}

KVTxnResponse has the outcome of a transaction.

type KeyringResponse added in v0.7.2 

type KeyringResponse struct {
	// Whether this response is for a WAN ring
	WAN bool

	// The datacenter name this request corresponds to
	Datacenter string

	// A map of the encryption keys to the number of nodes they're installed on
	Keys map[string]int

	// The total number of nodes in this ring
	NumNodes int
}

KeyringResponse is returned when listing the gossip encryption keys

type Lock 

type Lock struct {
	// contains filtered or unexported fields
}

Lock is used to implement client-side leader election. It is follows the algorithm as described here: https://www.consul.io/docs/guides/leader-election.html.

func (*Lock) Destroy 

func (l *Lock) Destroy() error

Destroy is used to cleanup the lock entry. It is not necessary to invoke. It will fail if the lock is in use.

func (*Lock) Lock 

func (l *Lock) Lock(stopCh <-chan struct{}) (<-chan struct{}, error)

Lock attempts to acquire the lock and blocks while doing so. Providing a non-nil stopCh can be used to abort the lock attempt. Returns a channel that is closed if our lock is lost or an error. This channel could be closed at any time due to session invalidation, communication errors, operator intervention, etc. It is NOT safe to assume that the lock is held until Unlock() unless the Session is specifically created without any associated health checks. By default Consul sessions prefer liveness over safety and an application must be able to handle the lock being lost.

func (*Lock) Unlock 

func (l *Lock) Unlock() error

Unlock released the lock. It is an error to call this if the lock is not currently held.

type LockOptions 

type LockOptions struct {
	Key              string        // Must be set and have write permissions
	Value            []byte        // Optional, value to associate with the lock
	Session          string        // Optional, created if not specified
	SessionOpts      *SessionEntry // Optional, options to use when creating a session
	SessionName      string        // Optional, defaults to DefaultLockSessionName (ignored if SessionOpts is given)
	SessionTTL       string        // Optional, defaults to DefaultLockSessionTTL (ignored if SessionOpts is given)
	MonitorRetries   int           // Optional, defaults to 0 which means no retries
	MonitorRetryTime time.Duration // Optional, defaults to DefaultMonitorRetryTime
	LockWaitTime     time.Duration // Optional, defaults to DefaultLockWaitTime
	LockTryOnce      bool          // Optional, defaults to false which means try forever
}

LockOptions is used to parameterize the Lock behavior.

type Node 

type Node struct {
	ID              string
	Node            string
	Address         string
	TaggedAddresses map[string]string
	Meta            map[string]string
}

type Operator added in v0.7.0 

type Operator struct {
	// contains filtered or unexported fields
}

Operator can be used to perform low-level operator tasks for Consul.

func (*Operator) AreaCreate added in v0.8.0 

func (op *Operator) AreaCreate(area *Area, q *WriteOptions) (string, *WriteMeta, error)

AreaCreate will create a new network area. The ID in the given structure must be empty and a generated ID will be returned on success.

func (*Operator) AreaDelete added in v0.8.0 

func (op *Operator) AreaDelete(areaID string, q *WriteOptions) (*WriteMeta, error)

AreaDelete deletes the given network area.

func (*Operator) AreaGet added in v0.8.0 

func (op *Operator) AreaGet(areaID string, q *QueryOptions) ([]*Area, *QueryMeta, error)

AreaGet returns a single network area.

func (*Operator) AreaJoin added in v0.8.0 

func (op *Operator) AreaJoin(areaID string, addresses []string, q *WriteOptions) ([]*AreaJoinResponse, *WriteMeta, error)

AreaJoin attempts to join the given set of join addresses to the given network area. See the Area structure for details about join addresses.

func (*Operator) AreaList added in v0.8.0 

func (op *Operator) AreaList(q *QueryOptions) ([]*Area, *QueryMeta, error)

AreaList returns all the available network areas.

func (*Operator) AreaMembers added in v0.8.0 

func (op *Operator) AreaMembers(areaID string, q *QueryOptions) ([]*SerfMember, *QueryMeta, error)

AreaMembers lists the Serf information about the members in the given area.

func (*Operator) AutopilotCASConfiguration added in v0.8.0 

func (op *Operator) AutopilotCASConfiguration(conf *AutopilotConfiguration, q *WriteOptions) (bool, error)

AutopilotCASConfiguration is used to perform a Check-And-Set update on the Autopilot configuration. The ModifyIndex value will be respected. Returns true on success or false on failures.

func (*Operator) AutopilotGetConfiguration added in v0.8.0 

func (op *Operator) AutopilotGetConfiguration(q *QueryOptions) (*AutopilotConfiguration, error)

AutopilotGetConfiguration is used to query the current Autopilot configuration.

func (*Operator) AutopilotServerHealth added in v0.8.0 

func (op *Operator) AutopilotServerHealth(q *QueryOptions) (*OperatorHealthReply, error)

AutopilotServerHealth

func (*Operator) AutopilotSetConfiguration added in v0.8.0 

func (op *Operator) AutopilotSetConfiguration(conf *AutopilotConfiguration, q *WriteOptions) error

AutopilotSetConfiguration is used to set the current Autopilot configuration.

func (*Operator) KeyringInstall added in v0.7.2 

func (op *Operator) KeyringInstall(key string, q *WriteOptions) error

KeyringInstall is used to install a new gossip encryption key into the cluster

func (*Operator) KeyringList added in v0.7.2 

func (op *Operator) KeyringList(q *QueryOptions) ([]*KeyringResponse, error)

KeyringList is used to list the gossip keys installed in the cluster

func (*Operator) KeyringRemove added in v0.7.2 

func (op *Operator) KeyringRemove(key string, q *WriteOptions) error

KeyringRemove is used to remove a gossip encryption key from the cluster

func (*Operator) KeyringUse added in v0.7.2 

func (op *Operator) KeyringUse(key string, q *WriteOptions) error

KeyringUse is used to change the active gossip encryption key

func (*Operator) RaftGetConfiguration added in v0.7.0 

func (op *Operator) RaftGetConfiguration(q *QueryOptions) (*RaftConfiguration, error)

RaftGetConfiguration is used to query the current Raft peer set.

func (*Operator) RaftRemovePeerByAddress added in v0.7.0 

func (op *Operator) RaftRemovePeerByAddress(address string, q *WriteOptions) error

RaftRemovePeerByAddress is used to kick a stale peer (one that it in the Raft quorum but no longer known to Serf or the catalog) by address in the form of "IP:port".

type OperatorHealthReply added in v0.8.0 

type OperatorHealthReply struct {
	// Healthy is true if all the servers in the cluster are healthy.
	Healthy bool

	// FailureTolerance is the number of healthy servers that could be lost without
	// an outage occurring.
	FailureTolerance int

	// Servers holds the health of each server.
	Servers []ServerHealth
}

OperatorHealthReply is a representation of the overall health of the cluster

type PreparedQuery added in v0.6.0 

type PreparedQuery struct {
	// contains filtered or unexported fields
}

PreparedQuery can be used to query the prepared query endpoints.

func (*PreparedQuery) Create added in v0.6.0 

func (c *PreparedQuery) Create(query *PreparedQueryDefinition, q *WriteOptions) (string, *WriteMeta, error)

Create makes a new prepared query. The ID of the new query is returned.

func (*PreparedQuery) Delete added in v0.6.0 

func (c *PreparedQuery) Delete(queryID string, q *WriteOptions) (*WriteMeta, error)

Delete is used to delete a specific prepared query.

func (*PreparedQuery) Execute added in v0.6.0 

func (c *PreparedQuery) Execute(queryIDOrName string, q *QueryOptions) (*PreparedQueryExecuteResponse, *QueryMeta, error)

Execute is used to execute a specific prepared query. You can execute using a query ID or name.

func (*PreparedQuery) Get added in v0.6.0 

func (c *PreparedQuery) Get(queryID string, q *QueryOptions) ([]*PreparedQueryDefinition, *QueryMeta, error)

Get is used to fetch a specific prepared query.

func (*PreparedQuery) List added in v0.6.0 

func (c *PreparedQuery) List(q *QueryOptions) ([]*PreparedQueryDefinition, *QueryMeta, error)

List is used to fetch all the prepared queries (always requires a management token).

func (*PreparedQuery) Update added in v0.6.0 

func (c *PreparedQuery) Update(query *PreparedQueryDefinition, q *WriteOptions) (*WriteMeta, error)

Update makes updates to an existing prepared query.

type PreparedQueryDefinition added in v0.6.0 

type PreparedQueryDefinition struct {
	// ID is this UUID-based ID for the query, always generated by Consul.
	ID string

	// Name is an optional friendly name for the query supplied by the
	// user. NOTE - if this feature is used then it will reduce the security
	// of any read ACL associated with this query/service since this name
	// can be used to locate nodes with supplying any ACL.
	Name string

	// Session is an optional session to tie this query's lifetime to. If
	// this is omitted then the query will not expire.
	Session string

	// Token is the ACL token used when the query was created, and it is
	// used when a query is subsequently executed. This token, or a token
	// with management privileges, must be used to change the query later.
	Token string

	// Service defines a service query (leaving things open for other types
	// later).
	Service ServiceQuery

	// DNS has options that control how the results of this query are
	// served over DNS.
	DNS QueryDNSOptions

	// Template is used to pass through the arguments for creating a
	// prepared query with an attached template. If a template is given,
	// interpolations are possible in other struct fields.
	Template QueryTemplate
}

PrepatedQueryDefinition defines a complete prepared query.

type PreparedQueryExecuteResponse added in v0.6.0 

type PreparedQueryExecuteResponse struct {
	// Service is the service that was queried.
	Service string

	// Nodes has the nodes that were output by the query.
	Nodes []ServiceEntry

	// DNS has the options for serving these results over DNS.
	DNS QueryDNSOptions

	// Datacenter is the datacenter that these results came from.
	Datacenter string

	// Failovers is a count of how many times we had to query a remote
	// datacenter.
	Failovers int
}

PreparedQueryExecuteResponse has the results of executing a query.

type QueryDNSOptions added in v0.6.0 

type QueryDNSOptions struct {
	// TTL is the time to live for the served DNS results.
	TTL string
}

QueryDNSOptions controls settings when query results are served over DNS.

type QueryDatacenterOptions added in v0.6.0 

type QueryDatacenterOptions struct {
	// NearestN is set to the number of remote datacenters to try, based on
	// network coordinates.
	NearestN int

	// Datacenters is a fixed list of datacenters to try after NearestN. We
	// never try a datacenter multiple times, so those are subtracted from
	// this list before proceeding.
	Datacenters []string
}

QueryDatacenterOptions sets options about how we fail over if there are no healthy nodes in the local datacenter.

type QueryMeta 

type QueryMeta struct {
	// LastIndex. This can be used as a WaitIndex to perform
	// a blocking query
	LastIndex uint64

	// Time of last contact from the leader for the
	// server servicing the request
	LastContact time.Duration

	// Is there a known leader
	KnownLeader bool

	// How long did the request take
	RequestTime time.Duration

	// Is address translation enabled for HTTP responses on this agent
	AddressTranslationEnabled bool
}

QueryMeta is used to return meta data about a query

type QueryOptions 

type QueryOptions struct {
	// Providing a datacenter overwrites the DC provided
	// by the Config
	Datacenter string

	// AllowStale allows any Consul server (non-leader) to service
	// a read. This allows for lower latency and higher throughput
	AllowStale bool

	// RequireConsistent forces the read to be fully consistent.
	// This is more expensive but prevents ever performing a stale
	// read.
	RequireConsistent bool

	// WaitIndex is used to enable a blocking query. Waits
	// until the timeout or the next index is reached
	WaitIndex uint64

	// WaitTime is used to bound the duration of a wait.
	// Defaults to that of the Config, but can be overridden.
	WaitTime time.Duration

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string

	// Near is used to provide a node name that will sort the results
	// in ascending order based on the estimated round trip time from
	// that node. Setting this to "_agent" will use the agent's node
	// for the sort.
	Near string

	// NodeMeta is used to filter results by nodes with the given
	// metadata key/value pairs. Currently, only one key/value pair can
	// be provided for filtering.
	NodeMeta map[string]string

	// RelayFactor is used in keyring operations to cause reponses to be
	// relayed back to the sender through N other random nodes. Must be
	// a value from 0 to 5 (inclusive).
	RelayFactor uint8
}

QueryOptions are used to parameterize a query

type QueryTemplate added in v0.7.0 

type QueryTemplate struct {
	// Type specifies the type of the query template. Currently only
	// "name_prefix_match" is supported. This field is required.
	Type string

	// Regexp allows specifying a regex pattern to match against the name
	// of the query being executed.
	Regexp string
}

QueryTemplate carries the arguments for creating a templated query.

type RaftConfiguration added in v0.7.0 

type RaftConfiguration struct {
	// Servers has the list of servers in the Raft configuration.
	Servers []*RaftServer

	// Index has the Raft index of this configuration.
	Index uint64
}

RaftConfigration is returned when querying for the current Raft configuration.

type RaftServer added in v0.7.0 

type RaftServer struct {
	// ID is the unique ID for the server. These are currently the same
	// as the address, but they will be changed to a real GUID in a future
	// release of Consul.
	ID string

	// Node is the node name of the server, as known by Consul, or this
	// will be set to "(unknown)" otherwise.
	Node string

	// Address is the IP:port of the server, used for Raft communications.
	Address string

	// Leader is true if this server is the current cluster leader.
	Leader bool

	// Voter is true if this server has a vote in the cluster. This might
	// be false if the server is staging and still coming online, or if
	// it's a non-voting server, which will be added in a future release of
	// Consul.
	Voter bool
}

RaftServer has information about a server in the Raft configuration.

type Raw 

type Raw struct {
	// contains filtered or unexported fields
}

Raw can be used to do raw queries against custom endpoints

func (*Raw) Query 

func (raw *Raw) Query(endpoint string, out interface{}, q *QueryOptions) (*QueryMeta, error)

Query is used to do a GET request against an endpoint and deserialize the response into an interface using standard Consul conventions.

func (*Raw) Write 

func (raw *Raw) Write(endpoint string, in, out interface{}, q *WriteOptions) (*WriteMeta, error)

Write is used to do a PUT request against an endpoint and serialize/deserialized using the standard Consul conventions.

type ReadableDuration added in v0.8.0 

type ReadableDuration time.Duration

ReadableDuration is a duration type that is serialized to JSON in human readable format.

func NewReadableDuration added in v0.8.0 

func NewReadableDuration(dur time.Duration) *ReadableDuration

func (*ReadableDuration) Duration added in v0.8.0 

func (d *ReadableDuration) Duration() time.Duration

func (*ReadableDuration) MarshalJSON added in v0.8.0 

func (d *ReadableDuration) MarshalJSON() ([]byte, error)

func (*ReadableDuration) String added in v0.8.0 

func (d *ReadableDuration) String() string

func (*ReadableDuration) UnmarshalJSON added in v0.8.0 

func (d *ReadableDuration) UnmarshalJSON(raw []byte) error

type Semaphore 

type Semaphore struct {
	// contains filtered or unexported fields
}

Semaphore is used to implement a distributed semaphore using the Consul KV primitives.

func (*Semaphore) Acquire 

func (s *Semaphore) Acquire(stopCh <-chan struct{}) (<-chan struct{}, error)

Acquire attempts to reserve a slot in the semaphore, blocking until success, interrupted via the stopCh or an error is encountered. Providing a non-nil stopCh can be used to abort the attempt. On success, a channel is returned that represents our slot. This channel could be closed at any time due to session invalidation, communication errors, operator intervention, etc. It is NOT safe to assume that the slot is held until Release() unless the Session is specifically created without any associated health checks. By default Consul sessions prefer liveness over safety and an application must be able to handle the session being lost.

func (*Semaphore) Destroy 

func (s *Semaphore) Destroy() error

Destroy is used to cleanup the semaphore entry. It is not necessary to invoke. It will fail if the semaphore is in use.

func (*Semaphore) Release 

func (s *Semaphore) Release() error

Release is used to voluntarily give up our semaphore slot. It is an error to call this if the semaphore has not been acquired.

type SemaphoreOptions 

type SemaphoreOptions struct {
	Prefix            string        // Must be set and have write permissions
	Limit             int           // Must be set, and be positive
	Value             []byte        // Optional, value to associate with the contender entry
	Session           string        // Optional, created if not specified
	SessionName       string        // Optional, defaults to DefaultLockSessionName
	SessionTTL        string        // Optional, defaults to DefaultLockSessionTTL
	MonitorRetries    int           // Optional, defaults to 0 which means no retries
	MonitorRetryTime  time.Duration // Optional, defaults to DefaultMonitorRetryTime
	SemaphoreWaitTime time.Duration // Optional, defaults to DefaultSemaphoreWaitTime
	SemaphoreTryOnce  bool          // Optional, defaults to false which means try forever
}

SemaphoreOptions is used to parameterize the Semaphore

type SerfMember added in v0.8.0 

type SerfMember struct {
	// ID is the node identifier (a UUID).
	ID string

	// Name is the node name.
	Name string

	// Addr has the IP address.
	Addr net.IP

	// Port is the RPC port.
	Port uint16

	// Datacenter is the DC name.
	Datacenter string

	// Role is "client", "server", or "unknown".
	Role string

	// Build has the version of the Consul agent.
	Build string

	// Protocol is the protocol of the Consul agent.
	Protocol int

	// Status is the Serf health status "none", "alive", "leaving", "left",
	// or "failed".
	Status string

	// RTT is the estimated round trip time from the server handling the
	// request to the this member. This will be negative if no RTT estimate
	// is available.
	RTT time.Duration
}

SerfMember is a generic structure for reporting information about members in a Serf cluster. This is only used by the area endpoints right now, but this could be expanded to other endpoints in the future.

type ServerHealth added in v0.8.0 

type ServerHealth struct {
	// ID is the raft ID of the server.
	ID string

	// Name is the node name of the server.
	Name string

	// Address is the address of the server.
	Address string

	// The status of the SerfHealth check for the server.
	SerfStatus string

	// Version is the Consul version of the server.
	Version string

	// Leader is whether this server is currently the leader.
	Leader bool

	// LastContact is the time since this node's last contact with the leader.
	LastContact *ReadableDuration

	// LastTerm is the highest leader term this server has a record of in its Raft log.
	LastTerm uint64

	// LastIndex is the last log index this server has a record of in its Raft log.
	LastIndex uint64

	// Healthy is whether or not the server is healthy according to the current
	// Autopilot config.
	Healthy bool

	// Voter is whether this is a voting server.
	Voter bool

	// StableSince is the last time this server's Healthy value changed.
	StableSince time.Time
}

ServerHealth is the health (from the leader's point of view) of a server.

type ServiceEntry 

type ServiceEntry struct {
	Node    *Node
	Service *AgentService
	Checks  HealthChecks
}

ServiceEntry is used for the health service endpoint

type ServiceQuery added in v0.6.0 

type ServiceQuery struct {
	// Service is the service to query.
	Service string

	// Near allows baking in the name of a node to automatically distance-
	// sort from. The magic "_agent" value is supported, which sorts near
	// the agent which initiated the request by default.
	Near string

	// Failover controls what we do if there are no healthy nodes in the
	// local datacenter.
	Failover QueryDatacenterOptions

	// If OnlyPassing is true then we will only include nodes with passing
	// health checks (critical AND warning checks will cause a node to be
	// discarded)
	OnlyPassing bool

	// Tags are a set of required and/or disallowed tags. If a tag is in
	// this list it must be present. If the tag is preceded with "!" then
	// it is disallowed.
	Tags []string

	// NodeMeta is a map of required node metadata fields. If a key/value
	// pair is in this map it must be present on the node in order for the
	// service entry to be returned.
	NodeMeta map[string]string
}

ServiceQuery is used to query for a set of healthy nodes offering a specific service.

type Session 

type Session struct {
	// contains filtered or unexported fields
}

Session can be used to query the Session endpoints

func (*Session) Create 

func (s *Session) Create(se *SessionEntry, q *WriteOptions) (string, *WriteMeta, error)

Create makes a new session. Providing a session entry can customize the session. It can also be nil to use defaults.

func (*Session) CreateNoChecks 

func (s *Session) CreateNoChecks(se *SessionEntry, q *WriteOptions) (string, *WriteMeta, error)

CreateNoChecks is like Create but is used specifically to create a session with no associated health checks.

func (*Session) Destroy 

func (s *Session) Destroy(id string, q *WriteOptions) (*WriteMeta, error)

Destroy invalidates a given session

func (*Session) Info 

func (s *Session) Info(id string, q *QueryOptions) (*SessionEntry, *QueryMeta, error)

Info looks up a single session

func (*Session) List 

func (s *Session) List(q *QueryOptions) ([]*SessionEntry, *QueryMeta, error)

List gets all active sessions

func (*Session) Node 

func (s *Session) Node(node string, q *QueryOptions) ([]*SessionEntry, *QueryMeta, error)

List gets sessions for a node

func (*Session) Renew 

func (s *Session) Renew(id string, q *WriteOptions) (*SessionEntry, *WriteMeta, error)

Renew renews the TTL on a given session

func (*Session) RenewPeriodic 

func (s *Session) RenewPeriodic(initialTTL string, id string, q *WriteOptions, doneCh chan struct{}) error

RenewPeriodic is used to periodically invoke Session.Renew on a session until a doneCh is closed. This is meant to be used in a long running goroutine to ensure a session stays valid.

type SessionEntry 

type SessionEntry struct {
	CreateIndex uint64
	ID          string
	Name        string
	Node        string
	Checks      []string
	LockDelay   time.Duration
	Behavior    string
	TTL         string
}

SessionEntry represents a session in consul

type Snapshot added in v0.7.1 

type Snapshot struct {
	// contains filtered or unexported fields
}

Snapshot can be used to query the /v1/snapshot endpoint to take snapshots of Consul's internal state and restore snapshots for disaster recovery.

func (*Snapshot) Restore added in v0.7.1 

func (s *Snapshot) Restore(q *WriteOptions, in io.Reader) error

Restore streams in an existing snapshot and attempts to restore it.

func (*Snapshot) Save added in v0.7.1 

func (s *Snapshot) Save(q *QueryOptions) (io.ReadCloser, *QueryMeta, error)

Save requests a new snapshot and provides an io.ReadCloser with the snapshot data to save. If this doesn't return an error, then it's the responsibility of the caller to close it. Only a subset of the QueryOptions are supported: Datacenter, AllowStale, and Token.

type Status 

type Status struct {
	// contains filtered or unexported fields
}

Status can be used to query the Status endpoints

func (*Status) Leader 

func (s *Status) Leader() (string, error)

Leader is used to query for a known leader

func (*Status) Peers 

func (s *Status) Peers() ([]string, error)

Peers is used to query for a known raft peers

type TLSConfig added in v0.7.0 

type TLSConfig struct {
	// Address is the optional address of the Consul server. The port, if any
	// will be removed from here and this will be set to the ServerName of the
	// resulting config.
	Address string

	// CAFile is the optional path to the CA certificate used for Consul
	// communication, defaults to the system bundle if not specified.
	CAFile string

	// CertFile is the optional path to the certificate for Consul
	// communication. If this is set then you need to also set KeyFile.
	CertFile string

	// KeyFile is the optional path to the private key for Consul communication.
	// If this is set then you need to also set CertFile.
	KeyFile string

	// InsecureSkipVerify if set to true will disable TLS host verification.
	InsecureSkipVerify bool
}

TLSConfig is used to generate a TLSClientConfig that's useful for talking to Consul using TLS.

type TxnError added in v0.7.0 

type TxnError struct {
	OpIndex int
	What    string
}

TxnError is used to return information about an operation in a transaction.

type TxnErrors added in v0.7.0 

type TxnErrors []*TxnError

TxnErrors is a list of TxnError objects.

type TxnOp added in v0.7.0 

type TxnOp struct {
	KV *KVTxnOp
}

TxnOp is the internal format we send to Consul. It's not specific to KV, though currently only KV operations are supported.

type TxnOps added in v0.7.0 

type TxnOps []*TxnOp

TxnOps is a list of transaction operations.

type TxnResponse added in v0.7.0 

type TxnResponse struct {
	Results TxnResults
	Errors  TxnErrors
}

TxnResponse is the internal format we receive from Consul.

type TxnResult added in v0.7.0 

type TxnResult struct {
	KV *KVPair
}

TxnResult is the internal format we receive from Consul.

type TxnResults added in v0.7.0 

type TxnResults []*TxnResult

TxnResults is a list of TxnResult objects.

type UserEvent 

type UserEvent struct {
	ID            string
	Name          string
	Payload       []byte
	NodeFilter    string
	ServiceFilter string
	TagFilter     string
	Version       int
	LTime         uint64
}

UserEvent represents an event that was fired by the user

type WriteMeta 

type WriteMeta struct {
	// How long did the request take
	RequestTime time.Duration
}

WriteMeta is used to return meta data about a write

type WriteOptions 

type WriteOptions struct {
	// Providing a datacenter overwrites the DC provided
	// by the Config
	Datacenter string

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string

	// RelayFactor is used in keyring operations to cause reponses to be
	// relayed back to the sender through N other random nodes. Must be
	// a value from 0 to 5 (inclusive).
	RelayFactor uint8
}

WriteOptions are used to parameterize a write

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.