subnets

package
v0.20.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 10, 2021 License: Apache-2.0 Imports: 2 Imported by: 322

Documentation

Overview

Package subnets contains functionality for working with Neutron subnet resources. A subnet represents an IP address block that can be used to assign IP addresses to virtual instances. Each subnet must have a CIDR and must be associated with a network. IPs can either be selected from the whole subnet CIDR or from allocation pools specified by the user.

A subnet can also have a gateway, a list of DNS name servers, and host routes. This information is pushed to instances whose interfaces are associated with the subnet.

Example to List Subnets 

listOpts := subnets.ListOpts{
	IPVersion: 4,
}

allPages, err := subnets.List(networkClient, listOpts).AllPages()
if err != nil {
	panic(err)
}

allSubnets, err := subnets.ExtractSubnets(allPages)
if err != nil {
	panic(err)
}

for _, subnet := range allSubnets {
	fmt.Printf("%+v\n", subnet)
}

Example to Create a Subnet With Specified Gateway 

var gatewayIP = "192.168.199.1"
createOpts := subnets.CreateOpts{
	NetworkID: "d32019d3-bc6e-4319-9c1d-6722fc136a22",
	IPVersion: 4,
	CIDR:      "192.168.199.0/24",
	GatewayIP: &gatewayIP,
	AllocationPools: []subnets.AllocationPool{
	  {
	    Start: "192.168.199.2",
	    End:   "192.168.199.254",
	  },
	},
	DNSNameservers: []string{"foo"},
}

subnet, err := subnets.Create(networkClient, createOpts).Extract()
if err != nil {
	panic(err)
}

Example to Create a Subnet With No Gateway 

var noGateway = ""

createOpts := subnets.CreateOpts{
	NetworkID: "d32019d3-bc6e-4319-9c1d-6722fc136a23",
	IPVersion: 4,
	CIDR:      "192.168.1.0/24",
	GatewayIP: &noGateway,
	AllocationPools: []subnets.AllocationPool{
		{
			Start: "192.168.1.2",
			End:   "192.168.1.254",
		},
	},
	DNSNameservers: []string{},
}

subnet, err := subnets.Create(networkClient, createOpts).Extract()
if err != nil {
	panic(err)
}

Example to Create a Subnet With a Default Gateway 

createOpts := subnets.CreateOpts{
	NetworkID: "d32019d3-bc6e-4319-9c1d-6722fc136a23",
	IPVersion: 4,
	CIDR:      "192.168.1.0/24",
	AllocationPools: []subnets.AllocationPool{
		{
			Start: "192.168.1.2",
			End:   "192.168.1.254",
		},
	},
	DNSNameservers: []string{},
}

subnet, err := subnets.Create(networkClient, createOpts).Extract()
if err != nil {
	panic(err)
}

Example to Update a Subnet 

subnetID := "db77d064-e34f-4d06-b060-f21e28a61c23"
dnsNameservers := []string{"8.8.8.8"}
name := "new_name"

updateOpts := subnets.UpdateOpts{
	Name:           &name,
	DNSNameservers: &dnsNameservers,
}

subnet, err := subnets.Update(networkClient, subnetID, updateOpts).Extract()
if err != nil {
	panic(err)
}

Example to Remove a Gateway From a Subnet 

var noGateway = ""
subnetID := "db77d064-e34f-4d06-b060-f21e28a61c23"

updateOpts := subnets.UpdateOpts{
	GatewayIP: &noGateway,
}

subnet, err := subnets.Update(networkClient, subnetID, updateOpts).Extract()
if err != nil {
	panic(err)
}

Example to Delete a Subnet 

subnetID := "db77d064-e34f-4d06-b060-f21e28a61c23"
err := subnets.Delete(networkClient, subnetID).ExtractErr()
if err != nil {
	panic(err)
}

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func List 

func List(c *gophercloud.ServiceClient, opts ListOptsBuilder) pagination.Pager

List returns a Pager which allows you to iterate over a collection of subnets. It accepts a ListOpts struct, which allows you to filter and sort the returned collection for greater efficiency.

Default policy settings return only those subnets that are owned by the tenant who submits the request, unless the request is submitted by a user with administrative rights.

Types

type AllocationPool 

type AllocationPool struct {
	Start string `json:"start"`
	End   string `json:"end"`
}

AllocationPool represents a sub-range of cidr available for dynamic allocation to ports, e.g. {Start: "10.0.0.2", End: "10.0.0.254"}

type CreateOpts 

type CreateOpts struct {
	// NetworkID is the UUID of the network the subnet will be associated with.
	NetworkID string `json:"network_id" required:"true"`

	// CIDR is the address CIDR of the subnet.
	CIDR string `json:"cidr,omitempty"`

	// Name is a human-readable name of the subnet.
	Name string `json:"name,omitempty"`

	// Description of the subnet.
	Description string `json:"description,omitempty"`

	// The UUID of the project who owns the Subnet. Only administrative users
	// can specify a project UUID other than their own.
	TenantID string `json:"tenant_id,omitempty"`

	// The UUID of the project who owns the Subnet. Only administrative users
	// can specify a project UUID other than their own.
	ProjectID string `json:"project_id,omitempty"`

	// AllocationPools are IP Address pools that will be available for DHCP.
	AllocationPools []AllocationPool `json:"allocation_pools,omitempty"`

	// GatewayIP sets gateway information for the subnet. Setting to nil will
	// cause a default gateway to automatically be created. Setting to an empty
	// string will cause the subnet to be created with no gateway. Setting to
	// an explicit address will set that address as the gateway.
	GatewayIP *string `json:"gateway_ip,omitempty"`

	// IPVersion is the IP version for the subnet.
	IPVersion gophercloud.IPVersion `json:"ip_version,omitempty"`

	// EnableDHCP will either enable to disable the DHCP service.
	EnableDHCP *bool `json:"enable_dhcp,omitempty"`

	// DNSNameservers are the nameservers to be set via DHCP.
	DNSNameservers []string `json:"dns_nameservers,omitempty"`

	// HostRoutes are any static host routes to be set via DHCP.
	HostRoutes []HostRoute `json:"host_routes,omitempty"`

	// The IPv6 address modes specifies mechanisms for assigning IPv6 IP addresses.
	IPv6AddressMode string `json:"ipv6_address_mode,omitempty"`

	// The IPv6 router advertisement specifies whether the networking service
	// should transmit ICMPv6 packets.
	IPv6RAMode string `json:"ipv6_ra_mode,omitempty"`

	// SubnetPoolID is the id of the subnet pool that subnet should be associated to.
	SubnetPoolID string `json:"subnetpool_id,omitempty"`

	// Prefixlen is used when user creates a subnet from the subnetpool. It will
	// overwrite the "default_prefixlen" value of the referenced subnetpool.
	Prefixlen int `json:"prefixlen,omitempty"`
}

CreateOpts represents the attributes used when creating a new subnet.

func (CreateOpts) ToSubnetCreateMap 

func (opts CreateOpts) ToSubnetCreateMap() (map[string]interface{}, error)

ToSubnetCreateMap builds a request body from CreateOpts.

type CreateOptsBuilder 

type CreateOptsBuilder interface {
	ToSubnetCreateMap() (map[string]interface{}, error)
}

CreateOptsBuilder allows extensions to add additional parameters to the List request.

type CreateResult 

type CreateResult struct {
	// contains filtered or unexported fields
}

CreateResult represents the result of a create operation. Call its Extract method to interpret it as a Subnet.

func Create 

func Create(c *gophercloud.ServiceClient, opts CreateOptsBuilder) (r CreateResult)

Create accepts a CreateOpts struct and creates a new subnet using the values provided. You must remember to provide a valid NetworkID, CIDR and IP version.

func (CreateResult) Extract 

func (r CreateResult) Extract() (*Subnet, error)

Extract is a function that accepts a result and extracts a subnet resource.

type DeleteResult 

type DeleteResult struct {
	gophercloud.ErrResult
}

DeleteResult represents the result of a delete operation. Call its ExtractErr method to determine if the request succeeded or failed.

func Delete 

func Delete(c *gophercloud.ServiceClient, id string) (r DeleteResult)

Delete accepts a unique ID and deletes the subnet associated with it.

type GetResult 

type GetResult struct {
	// contains filtered or unexported fields
}

GetResult represents the result of a get operation. Call its Extract method to interpret it as a Subnet.

func Get 

func Get(c *gophercloud.ServiceClient, id string) (r GetResult)

Get retrieves a specific subnet based on its unique ID.

func (GetResult) Extract 

func (r GetResult) Extract() (*Subnet, error)

Extract is a function that accepts a result and extracts a subnet resource.

type HostRoute 

type HostRoute struct {
	DestinationCIDR string `json:"destination"`
	NextHop         string `json:"nexthop"`
}

HostRoute represents a route that should be used by devices with IPs from a subnet (not including local subnet route).

type ListOpts 

type ListOpts struct {
	Name            string `q:"name"`
	Description     string `q:"description"`
	EnableDHCP      *bool  `q:"enable_dhcp"`
	NetworkID       string `q:"network_id"`
	TenantID        string `q:"tenant_id"`
	ProjectID       string `q:"project_id"`
	IPVersion       int    `q:"ip_version"`
	GatewayIP       string `q:"gateway_ip"`
	CIDR            string `q:"cidr"`
	IPv6AddressMode string `q:"ipv6_address_mode"`
	IPv6RAMode      string `q:"ipv6_ra_mode"`
	ID              string `q:"id"`
	SubnetPoolID    string `q:"subnetpool_id"`
	Limit           int    `q:"limit"`
	Marker          string `q:"marker"`
	SortKey         string `q:"sort_key"`
	SortDir         string `q:"sort_dir"`
	Tags            string `q:"tags"`
	TagsAny         string `q:"tags-any"`
	NotTags         string `q:"not-tags"`
	NotTagsAny      string `q:"not-tags-any"`
}

ListOpts allows the filtering and sorting of paginated collections through the API. Filtering is achieved by passing in struct field values that map to the subnet attributes you want to see returned. SortKey allows you to sort by a particular subnet attribute. SortDir sets the direction, and is either `asc' or `desc'. Marker and Limit are used for pagination.

func (ListOpts) ToSubnetListQuery 

func (opts ListOpts) ToSubnetListQuery() (string, error)

ToSubnetListQuery formats a ListOpts into a query string.

type ListOptsBuilder 

type ListOptsBuilder interface {
	ToSubnetListQuery() (string, error)
}

ListOptsBuilder allows extensions to add additional parameters to the List request.

type Subnet 

type Subnet struct {
	// UUID representing the subnet.
	ID string `json:"id"`

	// UUID of the parent network.
	NetworkID string `json:"network_id"`

	// Human-readable name for the subnet. Might not be unique.
	Name string `json:"name"`

	// Description for the subnet.
	Description string `json:"description"`

	// IP version, either `4' or `6'.
	IPVersion int `json:"ip_version"`

	// CIDR representing IP range for this subnet, based on IP version.
	CIDR string `json:"cidr"`

	// Default gateway used by devices in this subnet.
	GatewayIP string `json:"gateway_ip"`

	// DNS name servers used by hosts in this subnet.
	DNSNameservers []string `json:"dns_nameservers"`

	// Sub-ranges of CIDR available for dynamic allocation to ports.
	// See AllocationPool.
	AllocationPools []AllocationPool `json:"allocation_pools"`

	// Routes that should be used by devices with IPs from this subnet
	// (not including local subnet route).
	HostRoutes []HostRoute `json:"host_routes"`

	// Specifies whether DHCP is enabled for this subnet or not.
	EnableDHCP bool `json:"enable_dhcp"`

	// TenantID is the project owner of the subnet.
	TenantID string `json:"tenant_id"`

	// ProjectID is the project owner of the subnet.
	ProjectID string `json:"project_id"`

	// The IPv6 address modes specifies mechanisms for assigning IPv6 IP addresses.
	IPv6AddressMode string `json:"ipv6_address_mode"`

	// The IPv6 router advertisement specifies whether the networking service
	// should transmit ICMPv6 packets.
	IPv6RAMode string `json:"ipv6_ra_mode"`

	// SubnetPoolID is the id of the subnet pool associated with the subnet.
	SubnetPoolID string `json:"subnetpool_id"`

	// Tags optionally set via extensions/attributestags
	Tags []string `json:"tags"`
}

Subnet represents a subnet. See package documentation for a top-level description of what this is.

func ExtractSubnets 

func ExtractSubnets(r pagination.Page) ([]Subnet, error)

ExtractSubnets accepts a Page struct, specifically a SubnetPage struct, and extracts the elements into a slice of Subnet structs. In other words, a generic collection is mapped into a relevant slice.

type SubnetPage 

type SubnetPage struct {
	pagination.LinkedPageBase
}

SubnetPage is the page returned by a pager when traversing over a collection of subnets.

func (SubnetPage) IsEmpty 

func (r SubnetPage) IsEmpty() (bool, error)

IsEmpty checks whether a SubnetPage struct is empty.

func (SubnetPage) NextPageURL 

func (r SubnetPage) NextPageURL() (string, error)

NextPageURL is invoked when a paginated collection of subnets has reached the end of a page and the pager seeks to traverse over a new one. In order to do this, it needs to construct the next page's URL.

type UpdateOpts 

type UpdateOpts struct {
	// Name is a human-readable name of the subnet.
	Name *string `json:"name,omitempty"`

	// Description of the subnet.
	Description *string `json:"description,omitempty"`

	// AllocationPools are IP Address pools that will be available for DHCP.
	AllocationPools []AllocationPool `json:"allocation_pools,omitempty"`

	// GatewayIP sets gateway information for the subnet. Setting to nil will
	// cause a default gateway to automatically be created. Setting to an empty
	// string will cause the subnet to be created with no gateway. Setting to
	// an explicit address will set that address as the gateway.
	GatewayIP *string `json:"gateway_ip,omitempty"`

	// DNSNameservers are the nameservers to be set via DHCP.
	DNSNameservers *[]string `json:"dns_nameservers,omitempty"`

	// HostRoutes are any static host routes to be set via DHCP.
	HostRoutes *[]HostRoute `json:"host_routes,omitempty"`

	// EnableDHCP will either enable to disable the DHCP service.
	EnableDHCP *bool `json:"enable_dhcp,omitempty"`
}

UpdateOpts represents the attributes used when updating an existing subnet.

func (UpdateOpts) ToSubnetUpdateMap 

func (opts UpdateOpts) ToSubnetUpdateMap() (map[string]interface{}, error)

ToSubnetUpdateMap builds a request body from UpdateOpts.

type UpdateOptsBuilder 

type UpdateOptsBuilder interface {
	ToSubnetUpdateMap() (map[string]interface{}, error)
}

UpdateOptsBuilder allows extensions to add additional parameters to the Update request.

type UpdateResult 

type UpdateResult struct {
	// contains filtered or unexported fields
}

UpdateResult represents the result of an update operation. Call its Extract method to interpret it as a Subnet.

func Update 

func Update(c *gophercloud.ServiceClient, id string, opts UpdateOptsBuilder) (r UpdateResult)

Update accepts a UpdateOpts struct and updates an existing subnet using the values provided.

func (UpdateResult) Extract 

func (r UpdateResult) Extract() (*Subnet, error)

Extract is a function that accepts a result and extracts a subnet resource.

Source Files

View all Source files

Directories

Path Synopsis
subnets unit tests
 subnets unit tests

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.