free5GC Stage 3 Installation Guide
Minimum Requirement
- Software
- OS: Ubuntu 18.04 or later versions
- gcc 7.3.0
- Go 1.12.9 linux/amd64
- QEMU emulator 2.11.1
**Note:** Please use Ubuntu 18.04 or later versions and go 1.12.9 linux/amd64
You can use go version
to check your current Go version.
- Hardware
- CPU: Intel i5 processor
- RAM: 4GB
- Hard drive: 160G
- NIC card: 1Gbps ethernet card
- Hardware recommended
- CPU: Intel i7 processor
- RAM: 8GB
- Hard drive: 160G
- NIC card: 10Gbps ethernet card
Hardware Tested
There are no gNB and UE for standalone 5GC available in the market yet.
Installation
A. Install Control Plane Entities
-
Install the required packages
sudo apt -y update
sudo apt -y install mongodb wget git
sudo systemctl start mongodb
-
Go installation
- If another version of Go is installed
- Clean installation
- Install Go 1.12.9
wget https://dl.google.com/go/go1.12.9.linux-amd64.tar.gz
sudo tar -C /usr/local -zxvf go1.12.9.linux-amd64.tar.gz
mkdir -p ~/go/{bin,pkg,src}
echo 'export GOPATH=$HOME/go' >> ~/.bashrc
echo 'export GOROOT=/usr/local/go' >> ~/.bashrc
echo 'export PATH=$PATH:$GOPATH/bin:$GOROOT/bin' >> ~/.bashrc
echo 'export GO111MODULE=off' >> ~/.bashrc
source ~/.bashrc
-
Clone free5GC project in $GOPATH/src
cd $GOPATH/src
git clone https://bitbucket.org/free5GC/free5gc-stage-2.git free5gc
-
Run the script to install dependent packages
cd $GOPATH/src/free5gc
chmod +x ./install_env.sh```
./install_env.sh
Please ignore error messages during the package dependencies installation process.
-
Extract the free5gc_libs.tar.gz
to setup the environment for compiling
cd $GOPATH/src/free5gc
tar -C $GOPATH -zxvf free5gc_libs.tar.gz
-
Compile network function services in $GOPATH/src/free5gc
, e.g. AMF:
cd $GOPATH/src/free5gc
go build -o bin/amf -x src/amf/amf.go
-
Run network function services, e.g. AMF:
cd $GOPATH/src/free5gc
./bin/amf
In step 3, the folder name should remain free5gc. Please do not modify it or the compilation would fail.
B. Install User Plane Entity (UPF)
-
Install the required packages
sudo apt -y update
sudo apt -y install git gcc cmake autoconf libtool pkg-config libmnl-dev libyaml-dev
go get -u github.com/sirupsen/logrus
-
Please check Linux kernel version if it is 5.0.0-23-generic
uname -r
Get Linux kernel module 5G GTP-U
git clone https://github.com/PrinzOwO/gtp5g.git
cd gtp5g
make
sudo make install
-
Enter the UPF directory
cd $GOPATH/src/free5gc/src/upf
-
Build from sources
mkdir build
cd build
cmake ..
make -j `nproc`
-
Run UPF library test
(In directory: $GOPATH/src/free5gc/src/upf/build
sudo ./bin/testgtpv1
-
Config is located at $GOPATH/src/free5gc/src/upf/build/config/upfcfg.yaml
C. Run Procedure Tests
Start Wireshark to capture any interface with pfcp||icmp||gtp filter and run the tests below to simulate the procedures:
cd $GOPATH/src/free5gc
chmod +x ./test.sh
a. TestRegistration
(In directory: $GOPATH/src/free5gc)
./test.sh TestRegistration
b. TestServiceRequest
./test.sh TestServiceRequest
c. TestXnHandover
./test.sh TestXnHandover
d. TestDeregistration
./test.sh TestDeregistration
e. TestPDUSessionReleaseRequest
./test.sh TestPDUSessionReleaseRequest
g. TestNon3GPP
bash
./test.sh TestNon3GPP
h. TestULCL
bash
./test_ulcl.sh -om 3 TestRegistration
Trouble Shooting
-
ERROR: [SCTP] Failed to connect given AMF N3IWF=NGAP
This error occured when N3IWF was started before AMF finishing initialization. This error usually appears when you run the TestNon3GPP in the first time.
Rerun the test should be fine. If it still not be solved, larger the sleeping time in line 110 of test.sh
.
-
TestNon3GPP will modify the config/amfcfg.conf
. So, if you had killed the TestNon3GPP test before it finished, you might need to copy config/amfcfg.conf.bak
back to config/amfcfg.conf
to let other tests pass.
cp config/amfcfg.conf.bak config/amfcfg.conf
Appendix A: System Environment Cleaning
The below commands may be helpful for development purposes.
- Remove POSIX message queues
ls /dev/mqueue/
rm /dev/mqueue/*
- Remove gtp tunnels (using tools in libgtpnl)
cd ./src/upf/lib/libgtpnl-1.2.1/tools
./gtp-tunnel list
- Remove gtp devices (using tools in libgtpnl)
cd ./src/upf/lib/libgtpnl-1.2.1/tools
sudo ./gtp-link del {Dev-Name}
Appendix B: Program the SIM Card
Install packages:
sudo apt-get install pcscd pcsc-tools libccid python-dev swig python-setuptools python-pip libpcsclite-dev
sudo pip install pycrypto
Download PySIM
git clone git://git.osmocom.org/pysim.git
Change to pyscard folder and install
cd <pyscard-path>
sudo /usr/bin/python setup.py build_ext install
Verify your reader is ready
sudo pcsc_scan
Check whether your reader can read the SIM card
cd <pysim-path>
./pySim-read.py –p 0
Program your SIM card information
./pySim-prog.py -p 0 -x 208 -y 93 -t sysmoUSIM-SJS1 -i 208930000000003 --op=8e27b6af0e692e750f32667a3b14605d -k 8baf473f2f8fd09487cccbd7097c6862 -s 8988211000000088313 -a 23605945
You can get your SIM card from sysmocom. You also need a card reader to write your SIM card. You can get a card reader from here or use other similar devices.
Release Note
v3.0.0
- AMF
- Support SMF selection at PDU session establishment
- Fix SUCI handling procedure
- SMF
- Feature
- ULCL by config
- Authorized QoS
- Bugfix
- PDU Session Establishment PDUAddress Information
- PDU Session Establishment N1 Message
- SMContext Release Procedure
- UPF:
- ULCL feature
- support SDF Filter
- support N9 interface
- OAM
- Get Registered UE Context API
- OAM web UI to display Registered UE Context
- N3IWF
- Support Registration procedure for untrusted non-3GPP access
- Support UE Requested PDU Session Establishment via Untrusted non-3GPP Access
- UDM
- SUCI to SUPI de-concealment
- Notification
- Callback notification to NF ( in SDM service)
- UDM initiated deregistration notification to NF ( in UECM service)
v2.0.2
- Add debug mode on NFs
- Auto add Linux routing when UPF runs
- Add AMF consumer for AM policy
- Add SM policy
- Allow security NIA0 and NEA0
- Add handover feature
- Add webui
- Update license
- Bugfix for incorrect DNN
- Bugfix for NFs registering to NRF
v2.0.1
-
Global
- Update license and readme
- Add Paging feature
- Bugfix for AN release issue
- Add URL for SBI in NFs' config
-
AMF
- Add Paging feature
- Bugfix for SCTP PPID to 60
- Bugfix for UE release in testing
- Bugfix for too fast send UP data in testing
- Bugfix for sync with defaultc config in testing
-
SMF
- Add Paging feature
- Create PDR with FAR ID
- Bugfix for selecting DNN fail handler
-
UPF
- Sync config default address with Go NFs
- Remove GTP tunnel by removing PDR/FAR
- Bugfix for PFCP association setup
- Bugfix for new PDR/FAR creating
- Bugfix for PFCP session report
- Bugfix for getting from PDR
- Bugfix for log format and update logger version
-
PCF
- Bugfix for lost field and method