README
¶
Support for STM32 microcontrollers.
Contains examples you can run on supported develompent boards.
Directories
¶
| Path | Synopsis |
|---|---|
|
dci
|
|
|
owdci
Package owdci provides implementation of onewire.DCI interface.
|
Package owdci provides implementation of onewire.DCI interface. |
|
devboard
|
|
|
az3166/examples/blinky
This example shows the basic usage of available LEDs.
|
This example shows the basic usage of available LEDs. |
|
devebox-h743/examples/fputest
This program tests the thread scheduler according to saving/restoring a floating-point context.
|
This program tests the thread scheduler according to saving/restoring a floating-point context. |
|
emw3162/examples/blinky
This example shows the basic usage of available LEDs.
|
This example shows the basic usage of available LEDs. |
|
emw3162/examples/dma
This example tests different ways of coping memory.
|
This example tests different ways of coping memory. |
|
emw3162/examples/spi
SPI loop test: wire PB14 and PB15 together.
|
SPI loop test: wire PB14 and PB15 together. |
|
f4-discovery/examples/blinky
This example shows the basic usage of available LEDs and button.
|
This example shows the basic usage of available LEDs and button. |
|
f4-discovery/examples/display
Display draws on the connected display.
|
Display draws on the connected display. |
|
f4-discovery/examples/dma
This example tests different ways of coping memory.
|
This example tests different ways of coping memory. |
|
f4-discovery/examples/espat
Espat is an ESP-AT based TCP echo server.
|
Espat is an ESP-AT based TCP echo server. |
|
f4-discovery/examples/espnet
Espnet is an ESP-AT based TCP echo server.
|
Espnet is an ESP-AT based TCP echo server. |
|
f4-discovery/examples/gctest
This example forces the garbage collector to work hard and periodically prints statistics of the memory allocator.
|
This example forces the garbage collector to work hard and periodically prints statistics of the memory allocator. |
|
f4-discovery/examples/guncon
Guncon reads the state of PS1 Namco GunCon (G-Con).
|
Guncon reads the state of PS1 Namco GunCon (G-Con). |
|
f4-discovery/examples/irqbtn
This example shows how to handle the push-button with interrupts and with the software debouncing done right.
|
This example shows how to handle the push-button with interrupts and with the software debouncing done right. |
|
f4-discovery/examples/onewire
Onewire uses broadcast addressing mode to efficiently start the temperature conversion on all DS18x2x sensors on the 1-Wire bus simultaneously.
|
Onewire uses broadcast addressing mode to efficiently start the temperature conversion on all DS18x2x sensors on the 1-Wire bus simultaneously. |
|
f4-discovery/examples/spi
SPI loop test: wire PB14 and PB15 together.
|
SPI loop test: wire PB14 and PB15 together. |
|
minipro-f405/examples/blinky
This example shows the basic usage of available LEDs and button.
|
This example shows the basic usage of available LEDs and button. |
|
minipro-f405/examples/helloworld
The helloworld program prints text in a loop to the standard output.
|
The helloworld program prints text in a loop to the standard output. |
|
nucleo-l476rg/examples/blinky
This example shows the basic usage of the available LED and button.
|
This example shows the basic usage of the available LED and button. |
|
nucleo-l476rg/examples/dma
Dma tests different ways of coping memory.
|
Dma tests different ways of coping memory. |
|
nucleo-l476rg/examples/espat
Espat is an ESP-AT based TCP echo server.
|
Espat is an ESP-AT based TCP echo server. |
|
nucleo-l476rg/examples/espn
Espn is ESP-AT based TCP echo server.
|
Espn is ESP-AT based TCP echo server. |
|
nucleo-l476rg/examples/generator
Generator implements a square wave generator using an STM32 timer.
|
Generator implements a square wave generator using an STM32 timer. |
|
nucleo-l476rg/examples/goroutines
This example runs two goroutines that set on/off the user LED concurently.
|
This example runs two goroutines that set on/off the user LED concurently. |
|
nucleo-l476rg/examples/irqbtn
This example shows how to handle the push-button with interrupts and with the software debouncing done right.
|
This example shows how to handle the push-button with interrupts and with the software debouncing done right. |
|
nucleo-l476rg/examples/pwm
PWM uses timer to implement PWM blinking of the onboard LED.
|
PWM uses timer to implement PWM blinking of the onboard LED. |
|
nucleo-l476rg/examples/reboot
Reboot shows the way to perform unsafe reboot of the ST32L746 MCU.
|
Reboot shows the way to perform unsafe reboot of the ST32L746 MCU. |
|
nucleo-l476rg/examples/shell
Shell shows how to use the Embedded Go virtual filesystem.
|
Shell shows how to use the Embedded Go virtual filesystem. |
|
nucleo-l476rg/examples/spi
SPI loop test: wire PA6 and PA7 together.
|
SPI loop test: wire PA6 and PA7 together. |
|
nucleo-l476rg/examples/upsexti
Upsexti uses EXTI to detect changes in the button state.
|
Upsexti uses EXTI to detect changes in the button state. |
|
nucleo-l476rg/examples/upstim
Upstime uses a timer to detect changes in the button state.
|
Upstime uses a timer to detect changes in the button state. |
|
nucleo-l476rg/examples/usart
This example tests the USART1 interface.
|
This example tests the USART1 interface. |
|
nucleo-l496zg/examples/blinky
This example shows the basic usage of available LEDs and button.
|
This example shows the basic usage of available LEDs and button. |
|
nucleo-l496zg/examples/dma
This example tests different ways of coping memory.
|
This example tests different ways of coping memory. |
|
nucleo-l496zg/examples/gctest
This example forces the garbage collector to work hard and periodically prints statistics of the memory allocator.
|
This example forces the garbage collector to work hard and periodically prints statistics of the memory allocator. |
|
nucleo-l496zg/examples/irqbtn
This example shows how to handle the push-button with interrupts and with the software debouncing done right.
|
This example shows how to handle the push-button with interrupts and with the software debouncing done right. |
|
nucleo-l496zg/examples/spi
SPI loop test: wire PA6 and PA7 together.
|
SPI loop test: wire PA6 and PA7 together. |
|
hal
|
|
|
dma
Package dma provides uniform interface to the DMA controllers.
|
Package dma provides uniform interface to the DMA controllers. |
|
exti
Package exti provides an interface to the External Interrupt/event controller.
|
Package exti provides an interface to the External Interrupt/event controller. |
|
gpio
Package gpio provides interface to configure and control GPIO ports, pins and alternate functions.
|
Package gpio provides interface to configure and control GPIO ports, pins and alternate functions. |
|
mem/nocache
Package nocache allows to allocate variables and slices of arbitrary type in the DMA-capable non-cached memory.
|
Package nocache allows to allocate variables and slices of arbitrary type in the DMA-capable non-cached memory. |
|
spi
Package spi provides unified way to configure/use SPI peripherals.
|
Package spi provides unified way to configure/use SPI peripherals. |
|
system/timer/systick
Package systick allows to setup ARMv7-M SysTick timer as ticking system timer.
|
Package systick allows to setup ARMv7-M SysTick timer as ticking system timer. |
|
usart
Package spi provides unified way to configure/use USART peripherals.
|
Package spi provides unified way to configure/use USART peripherals. |
Click to show internal directories.
Click to hide internal directories.