http

package
v1.20.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 16, 2017 License: MIT Imports: 28 Imported by: 0

Documentation

Overview

Package http implements a YARPC transport based on the HTTP/1.1 protocol. The HTTP transport provides first class support for Unary RPCs and experimental support for Oneway RPCs.

Usage

An HTTP Transport must be constructed to use this transport. 

httpTransport := http.NewTransport()

To serve your YARPC application over HTTP, pass an HTTP inbound in your yarpc.Config. 

myInbound := httpTransport.NewInbound(":8080")
dispatcher := yarpc.NewDispatcher(yarpc.Config{
	Name: "myservice",
	Inbounds: yarpc.Inbounds{myInbound},
})

To make requests to a YARPC application that supports HTTP, pass an HTTP outbound in your yarpc.Config. 

myserviceOutbound := httpTransport.NewSingleOutbound("http://127.0.0.1:8080")
dispatcher := yarpc.NewDispatcher(yarpc.Config{
	Name: "myclient",
	Outbounds: yarpc.Outbounds{
		"myservice": {Unary: myserviceOutbound},
	},
})

Note that stopping an HTTP transport does NOT immediately terminate ongoing requests. Connections will remain open until all clients have disconnected.

Configuration

An HTTP Transport may be configured using YARPC's configuration system. See TransportConfig, InboundConfig, and OutboundConfig for details on the different configuration parameters supported by this transport.

Wire Representation

YARPC requests and responses are sent as plain HTTP requests and responses. YARPC metadata is sent inside reserved HTTP headers. Application headers for requests and responses are sent as HTTP headers with the header names prefixed with a pre-defined string. See Constants for more information on the names of these headers. The request and response bodies are sent as-is in the HTTP request or response body.

See Also

YARPC Properties: https://github.com/yarpc/yarpc/blob/master/properties.md

Index

Examples

Constants

View Source 
const (
	// Name of the service sending the request. This corresponds to the
	// Request.Caller attribute.
	CallerHeader = "Rpc-Caller"

	// Name of the encoding used for the request body. This corresponds to the
	// Request.Encoding attribute.
	EncodingHeader = "Rpc-Encoding"

	// Amount of time (in milliseconds) within which the request is expected
	// to finish.
	TTLMSHeader = "Context-TTL-MS"

	// Name of the procedure being called. This corresponds to the
	// Request.Procedure attribute.
	ProcedureHeader = "Rpc-Procedure"

	// Name of the service to which the request is being sent. This
	// corresponds to the Request.Service attribute.
	ServiceHeader = "Rpc-Service"

	// Shard key used by the destined service to shard the request. This
	// corresponds to the Request.ShardKey attribute.
	ShardKeyHeader = "Rpc-Shard-Key"

	// The traffic group responsible for handling the request. This
	// corresponds to the Request.RoutingKey attribute.
	RoutingKeyHeader = "Rpc-Routing-Key"

	// A service that can proxy the destined service. This corresponds to the
	// Request.RoutingDelegate attribute.
	RoutingDelegateHeader = "Rpc-Routing-Delegate"

	// Whether the response body contains an application error.
	ApplicationStatusHeader = "Rpc-Status"

	// ErrorCodeHeader contains the string representation of the error code.
	ErrorCodeHeader = "Rpc-Error-Code"

	// ErrorNameHeader contains the name of a user-defined error.
	ErrorNameHeader = "Rpc-Error-Name"
)

HTTP headers used in requests and responses to send YARPC metadata.

View Source 
const (
	// The request was successful.
	ApplicationSuccessStatus = "success"

	// An error occurred. The response body contains an application header.
	ApplicationErrorStatus = "error"
)

Valid values for the Rpc-Status header.

View Source 
const ApplicationHeaderPrefix = "Rpc-Header-"

ApplicationHeaderPrefix is the prefix added to application header keys to send them in requests or responses.

Variables

This section is empty.

Functions

func TransportSpec added in v1.9.0 

func TransportSpec(opts ...Option) yarpcconfig.TransportSpec

TransportSpec returns a TransportSpec for the HTTP transport.

See TransportConfig, InboundConfig, and OutboundConfig for details on the different configuration parameters supported by this Transport.

Any Transport, Inbound or Outbound option may be passed to this function. These options will be applied BEFORE configuration parameters are interpreted. This allows configuration parameters to override Option provided to TransportSpec.

Types

type Inbound 

type Inbound struct {
	// contains filtered or unexported fields
}

Inbound receives YARPC requests using an HTTP server. It may be constructed using the NewInbound method on the Transport.

Example 
package main

import (
	"log"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	transport := http.NewTransport()
	inbound := transport.NewInbound(":8888")

	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "myservice",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()
}

Output:

func (*Inbound) Addr 

func (i *Inbound) Addr() net.Addr

Addr returns the address on which the server is listening. Returns nil if Start has not been called yet.

func (*Inbound) Introspect added in v1.0.0 

func (i *Inbound) Introspect() introspection.InboundStatus

Introspect returns the state of the inbound for introspection purposes.

func (*Inbound) IsRunning added in v1.0.0 

func (i *Inbound) IsRunning() bool

IsRunning returns whether the inbound is currently running

func (*Inbound) SetRouter added in v1.0.0 

func (i *Inbound) SetRouter(router transport.Router)

SetRouter configures a router to handle incoming requests. This satisfies the transport.Inbound interface, and would be called by a dispatcher when it starts.

func (*Inbound) Start added in v1.0.0 

func (i *Inbound) Start() error

Start starts the inbound with a given service detail, opening a listening socket.

func (*Inbound) Stop added in v1.0.0 

func (i *Inbound) Stop() error

Stop the inbound, closing the listening socket.

func (*Inbound) Tracer added in v1.0.0 

func (i *Inbound) Tracer(tracer opentracing.Tracer) *Inbound

Tracer configures a tracer on this inbound.

func (*Inbound) Transports added in v1.0.0 

func (i *Inbound) Transports() []transport.Transport

Transports returns the inbound's HTTP transport.

type InboundConfig added in v1.9.0 

type InboundConfig struct {
	// Address to listen on. This field is required.
	Address string `config:"address,interpolate"`
	// The additional headers, starting with x, that should be
	// propagated to handlers. This field is optional.
	GrabHeaders []string `config:"grabHeaders"`
}

InboundConfig configures an HTTP inbound. 

inbounds:
  http:
    address: ":80"
    grabHeaders:
      - x-foo
      - x-bar

type InboundOption 

type InboundOption func(*Inbound)

InboundOption customizes the behavior of an HTTP Inbound constructed with NewInbound.

func GrabHeaders added in v1.17.0 

func GrabHeaders(headers ...string) InboundOption

GrabHeaders specifies additional headers that are not prefixed with ApplicationHeaderPrefix that should be propagated to the caller.

All headers given must begin with x- or X- or the Inbound that the returned option is passed to will return an error when Start is called.

Headers specified with GrabHeaders are case-insensitive. https://www.w3.org/Protocols/rfc2616/rfc2616-sec4.html#sec4.2

func Interceptor added in v1.20.0 

func Interceptor(interceptor func(yarpcHandler http.Handler) http.Handler) InboundOption

Interceptor specifies a function which can wrap the YARPC handler. If provided, this function will be called with an http.Handler which will route requests through YARPC. The http.Handler returned by this function may delegate requests to the provided YARPC handler to route them through YARPC.

Example 
package main

import (
	"io"
	"log"

	nethttp "net/http"
	"os"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	// import nethttp "net/http"

	// Given a fallback http.Handler
	fallback := nethttp.HandlerFunc(func(w nethttp.ResponseWriter, r *nethttp.Request) {
		io.WriteString(w, "hello, world!")
	})

	// Create an interceptor that falls back to a handler when the HTTP request is
	// missing the RPC-Encoding header.
	intercept := func(transportHandler nethttp.Handler) nethttp.Handler {
		return nethttp.HandlerFunc(func(w nethttp.ResponseWriter, r *nethttp.Request) {
			if r.Header.Get(http.EncodingHeader) == "" {
				// Not a YARPC request, use fallback handler.
				fallback.ServeHTTP(w, r)
			} else {
				transportHandler.ServeHTTP(w, r)
			}
		})
	}

	// Create a new inbound, attaching the interceptor
	transport := http.NewTransport()
	inbound := transport.NewInbound(":8889", http.Interceptor(intercept))

	// Fire up a dispatcher with the new inbound.
	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "server",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()

	// Make a non-YARPC request to the / endpoint.
	res, err := nethttp.Get("http://127.0.0.1:8889/")
	if err != nil {
		log.Fatal(err)
	}
	defer res.Body.Close()

	if _, err := io.Copy(os.Stdout, res.Body); err != nil {
		log.Fatal(err)
	}
}

Output:

hello, world!

func Mux 

func Mux(pattern string, mux *http.ServeMux) InboundOption

Mux specifies that the HTTP server should make the YARPC endpoint available under the given pattern on the given ServeMux. By default, the YARPC service is made available on all paths of the HTTP server. By specifying a ServeMux, users can narrow the endpoints under which the YARPC service is available and offer their own non-YARPC endpoints.

Example 
package main

import (
	"fmt"
	"io"
	"log"

	nethttp "net/http"
	"os"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	// import nethttp "net/http"

	// We set up a ServeMux which provides a /health endpoint.
	mux := nethttp.NewServeMux()
	mux.HandleFunc("/health", func(w nethttp.ResponseWriter, _ *nethttp.Request) {
		if _, err := fmt.Fprintln(w, "hello from /health"); err != nil {
			panic(err)
		}
	})

	// This inbound will serve the YARPC service on the path /yarpc.  The
	// /health endpoint on the Mux will be left alone.
	transport := http.NewTransport()
	inbound := transport.NewInbound(":8888", http.Mux("/yarpc", mux))

	// Fire up a dispatcher with the new inbound.
	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "server",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()

	// Make a request to the /health endpoint.
	res, err := nethttp.Get("http://127.0.0.1:8888/health")
	if err != nil {
		log.Fatal(err)
	}
	defer res.Body.Close()

	if _, err := io.Copy(os.Stdout, res.Body); err != nil {
		log.Fatal(err)
	}
}

Output:

hello from /health

type Option added in v1.8.0 

type Option interface {
	// contains filtered or unexported methods
}

Option allows customizing the YARPC HTTP transport. Any InboundOption, OutboundOption, or TransportOption is a valid Option.

type Outbound added in v0.4.0 

type Outbound struct {
	// contains filtered or unexported fields
}

Outbound sends YARPC requests over HTTP. It may be constructed using the NewOutbound function or the NewOutbound or NewSingleOutbound methods on the HTTP Transport. It is recommended that services use a single HTTP transport to construct all HTTP outbounds, ensuring efficient sharing of resources across the different outbounds.

Example 
package main

import (
	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	transport := http.NewTransport()

	yarpc.NewDispatcher(yarpc.Config{
		Name: "myservice",
		Outbounds: yarpc.Outbounds{
			"myservice": {
				Unary: transport.NewSingleOutbound("http://127.0.0.1:8888"),
			},
			"anotherservice": {
				Unary: transport.NewSingleOutbound("http://127.0.0.1:9999"),
			},
		},
	})
}

Output:

func NewOutbound 

func NewOutbound(chooser peer.Chooser, opts ...OutboundOption) *Outbound

NewOutbound builds an HTTP outbound that sends requests to peers supplied by the given peer.Chooser. The URL template for used for the different peers may be customized using the URLTemplate option.

The peer chooser and outbound must share the same transport, in this case the HTTP transport. The peer chooser must use the transport's RetainPeer to obtain peer instances and return those peers to the outbound when it calls Choose. The concrete peer type is private and intrinsic to the HTTP transport.

func (*Outbound) Call added in v0.4.0 

func (o *Outbound) Call(ctx context.Context, treq *transport.Request) (*transport.Response, error)

Call makes a HTTP request

func (*Outbound) CallOneway added in v0.4.0 

func (o *Outbound) CallOneway(ctx context.Context, treq *transport.Request) (transport.Ack, error)

CallOneway makes a oneway request

func (*Outbound) Chooser added in v1.9.0 

func (o *Outbound) Chooser() peer.Chooser

Chooser returns the outbound's peer chooser.

func (*Outbound) Introspect added in v1.0.0 

func (o *Outbound) Introspect() introspection.OutboundStatus

Introspect returns basic status about this outbound.

func (*Outbound) IsRunning added in v1.0.0 

func (o *Outbound) IsRunning() bool

IsRunning returns whether the Outbound is running.

func (*Outbound) Start added in v0.4.0 

func (o *Outbound) Start() error

Start the HTTP outbound

func (*Outbound) Stop added in v0.4.0 

func (o *Outbound) Stop() error

Stop the HTTP outbound

func (*Outbound) Transports added in v1.0.0 

func (o *Outbound) Transports() []transport.Transport

Transports returns the outbound's HTTP transport.

type OutboundConfig added in v1.9.0 

type OutboundConfig struct {
	yarpcconfig.PeerChooser

	// URL to which requests will be sent for this outbound. This field is
	// required.
	URL string `config:"url,interpolate"`

	// HTTP headers that will be added to all requests made through this
	// outbound.
	//
	//  http:
	//    url: "http://localhost:8080/yarpc"
	//    addHeaders:
	//      X-Caller: myserice
	//      X-Token: foo
	AddHeaders map[string]string `config:"addHeaders"`
}

OutboundConfig configures an HTTP outbound. 

outbounds:
  keyvalueservice:
    http:
      url: "http://127.0.0.1:80/"

The HTTP outbound supports both, Unary and Oneway transport types. To use it for only one of these, nest the section inside a "unary" or "onewy" section. 

outbounds:
  keyvalueservice:
    unary:
      http:
        url: "http://127.0.0.1:80/"

An HTTP outbound can also configure a peer list. In this case, there can still be a "url" and it serves as a template for the HTTP client, expressing whether to use "http:" or "https:" and what path to use. The address gets replaced with peers from the peer list. 

outbounds:
  keyvalueservice:
    unary:
      http:
        url: "https://address/rpc"
        round-robin:
          peers:
            - 127.0.0.1:8080
            - 127.0.0.1:8081

type OutboundOption 

type OutboundOption func(*Outbound)

OutboundOption customizes an HTTP Outbound.

func AddHeader added in v1.8.0 

func AddHeader(key, value string) OutboundOption

AddHeader specifies that an HTTP outbound should always include the given header in outgoung requests. 

httpTransport.NewOutbound(chooser, http.AddHeader("X-Token", "TOKEN"))

Note that headers starting with "Rpc-" are reserved by YARPC. This function will panic if the header starts with "Rpc-".

func URLTemplate added in v1.0.0 

func URLTemplate(template string) OutboundOption

URLTemplate specifies the URL this outbound makes requests to. For peer.Chooser-based outbounds, the peer (host:port) spection of the URL may vary from call to call but the rest will remain unchanged. For single-peer outbounds, the URL will be used as-is.

type Transport added in v1.0.0 

type Transport struct {
	// contains filtered or unexported fields
}

Transport keeps track of HTTP peers and the associated HTTP client. It allows using a single HTTP client to make requests to multiple YARPC services and pooling the resources needed therein.

func NewTransport added in v1.0.0 

func NewTransport(opts ...TransportOption) *Transport

NewTransport creates a new HTTP transport for managing peers and sending requests

func (*Transport) IsRunning added in v1.0.0 

func (a *Transport) IsRunning() bool

IsRunning returns whether the HTTP transport is running.

func (*Transport) NewInbound added in v1.0.0 

func (t *Transport) NewInbound(addr string, opts ...InboundOption) *Inbound

NewInbound builds a new HTTP inbound that listens on the given address and sharing this transport.

func (*Transport) NewOutbound added in v1.0.0 

func (t *Transport) NewOutbound(chooser peer.Chooser, opts ...OutboundOption) *Outbound

NewOutbound builds an HTTP outbound that sends requests to peers supplied by the given peer.Chooser. The URL template for used for the different peers may be customized using the URLTemplate option.

The peer chooser and outbound must share the same transport, in this case the HTTP transport. The peer chooser must use the transport's RetainPeer to obtain peer instances and return those peers to the outbound when it calls Choose. The concrete peer type is private and intrinsic to the HTTP transport.

func (*Transport) NewSingleOutbound added in v1.0.0 

func (t *Transport) NewSingleOutbound(uri string, opts ...OutboundOption) *Outbound

NewSingleOutbound builds an outbound that sends YARPC requests over HTTP to the specified URL.

The URLTemplate option has no effect in this form.

func (*Transport) ReleasePeer added in v1.0.0 

func (a *Transport) ReleasePeer(pid peer.Identifier, sub peer.Subscriber) error

ReleasePeer releases a peer from the peer.Subscriber and removes that peer from the Transport if nothing is listening to it

func (*Transport) RetainPeer added in v1.0.0 

func (a *Transport) RetainPeer(pid peer.Identifier, sub peer.Subscriber) (peer.Peer, error)

RetainPeer gets or creates a Peer for the specified peer.Subscriber (usually a peer.Chooser)

func (*Transport) Start added in v1.0.0 

func (a *Transport) Start() error

Start starts the HTTP transport.

func (*Transport) Stop added in v1.0.0 

func (a *Transport) Stop() error

Stop stops the HTTP transport.

type TransportConfig added in v1.9.0 

type TransportConfig struct {
	// Specifies the keep-alive period for all HTTP clients. This field is
	// optional.
	KeepAlive           time.Duration       `config:"keepAlive"`
	MaxIdleConnsPerHost int                 `config:"maxIdleConnsPerHost"`
	ConnTimeout         time.Duration       `config:"connTimeout"`
	ConnBackoff         yarpcconfig.Backoff `config:"connBackoff"`
}

TransportConfig configures the shared HTTP Transport. This is shared between all HTTP outbounds and inbounds of a Dispatcher. 

transports:
  http:
    keepAlive: 30s
    maxIdleConnsPerHost: 2
    connTimeout: 500ms
    connBackoff:
      exponential:
        first: 10ms
        max: 30s

All parameters of TransportConfig are optional. This section may be omitted in the transports section.

type TransportOption added in v1.0.0 

type TransportOption func(*transportOptions)

TransportOption customizes the behavior of an HTTP transport.

func ConnBackoff added in v1.10.0 

func ConnBackoff(s backoffapi.Strategy) TransportOption

ConnBackoff specifies the connection backoff strategy for delays between connection attempts for each peer.

The default is exponential backoff starting with 10ms fully jittered, doubling each attempt, with a maximum interval of 30s.

func ConnTimeout added in v1.10.0 

func ConnTimeout(d time.Duration) TransportOption

ConnTimeout is the time that the transport will wait for a connection attempt. If a peer has been retained by a peer list, connection attempts are performed in a goroutine off the request path.

The default is half a second.

func KeepAlive 

func KeepAlive(t time.Duration) TransportOption

KeepAlive specifies the keep-alive period for the network connection. If zero, keep-alives are disabled.

Defaults to 30 seconds.

func MaxIdleConnsPerHost added in v1.6.0 

func MaxIdleConnsPerHost(i int) TransportOption

MaxIdleConnsPerHost specifies the number of idle (keep-alive) HTTP connections that will be maintained per host. Existing idle connections will be used instead of creating new HTTP connections.

Defaults to 2 connections.

func Tracer added in v1.0.0 

func Tracer(tracer opentracing.Tracer) TransportOption

Tracer configures a tracer for the transport and all its inbounds and outbounds.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.