replicaset

package
v0.6.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 16, 2019 License: Apache-2.0 Imports: 19 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func AtDesiredReplicaCountsForCanary added in v0.2.0 

func AtDesiredReplicaCountsForCanary(rollout *v1alpha1.Rollout, newRS, stableRS *appsv1.ReplicaSet, olderRSs []*appsv1.ReplicaSet) bool

AtDesiredReplicaCountsForCanary indicates if the rollout is at the desired state for the current step

func CalculateReplicaCountsForCanary added in v0.2.0 

func CalculateReplicaCountsForCanary(rollout *v1alpha1.Rollout, newRS *appsv1.ReplicaSet, stableRS *appsv1.ReplicaSet, oldRSs []*appsv1.ReplicaSet) (int32, int32)

CalculateReplicaCountsForCanary calculates the number of replicas for the newRS and the stableRS. The function calculates the desired number of replicas for the new and stable RS using the following equations:

newRS Replica count = spec.Replica * (setweight / 100) stableRS Replica count = spec.Replica * ( (1 - setweight) / 100)

In both equations, the function rounds the desired replica count up if the math does not divide into whole numbers because the rollout guarantees at least one replica for both the stable and new RS when the setWeight is not 0 or 100. Then, the function finds the number of replicas it can scale up using the following equation:

scaleUpCount := (maxSurge + rollout.Spec.Replica) - sum of rollout's RSs spec.Replica

If the rollout has not reached its max number of replicas, it will scale up the RS whose desired replica count is greater than its current count to the desired number. The rollout will either scale the RS up as much as it can unless the rollout can reach the RS desired count. In order to give precenence to the stableRS, the function will scale up the stable RS to desired count before scaling up the new RS.

At this point, the function then finds the number of replicas it can scale down using the following equation:

scaleDownCount := count of all the available replicas - (spec.Replica - maxUnavailable)

If the rollout has not reached at the min available replicas count, it will scale down the RS whose desired replica count is less than its current count to the desired number. However before scaling any new or stable RS down, the function will scale down the replicas in the old RS list first. Afterwards if the rollout is not at the min available replica count, the function will check the newRS before the stableRS.

Examples: replicas 10 currentWeight 10 NewRS 0 stableRS 10 max unavailable 1, surge 1 - should return newRS 1 stableRS 9 replicas 10 currentWeight 30 NewRS 0 stableRS 10 max unavailable 0, surge 3 - should return newRS 3 stableRS 10 replicas 10 currentWeight 30 NewRS 0 stableRS 10 max unavailable 5, surge 0 - should return newRS 0 stableRS 7 replicas 10 currentWeight 5 NewRS 0 stableRS 10 max unavailable 1, surge 1 - should return newRS 1 stableRS 9 replicas 1 currentWeight 5 NewRS 0 stableRS 1 max unavailable 0, surge 1 - should return newRS 1 stableRS 1 replicas 1 currentWeight 95 NewRS 0 stableRS 1 max unavailable 0, surge 1 - should return newRS 1 stableRS 1 For more examples, check the TestCalculateReplicaCountsForCanary test in canary/canary_test.go

func CheckPodSpecChange added in v0.2.0 

func CheckPodSpecChange(rollout *v1alpha1.Rollout, newRS *appsv1.ReplicaSet) bool

checkPodSpecChange indicates if the rollout spec has changed indicating that the rollout needs to reset the currentStepIndex to zero. If there is no previous pod spec to compare to the function defaults to false

func CheckStableRSExists added in v0.2.0 

func CheckStableRSExists(newRS, stableRS *appsv1.ReplicaSet) bool

CheckStableRSExists checks if the stableRS exists and is different than the newRS

func DesiredReplicaCountsForCanary added in v0.2.0 

func DesiredReplicaCountsForCanary(rollout *v1alpha1.Rollout, newRS, stableRS *appsv1.ReplicaSet) (int32, int32)

DesiredReplicaCountsForCanary calculates the desired endstate replica count for the new and stable replicasets

func FindActiveOrLatest 

func FindActiveOrLatest(newRS *appsv1.ReplicaSet, oldRSs []*appsv1.ReplicaSet) *appsv1.ReplicaSet

FindActiveOrLatest returns the only active or the latest replica set in case there is at most one active replica set. If there are more active replica sets, then we should proportionally scale them.

func FindNewReplicaSet 

func FindNewReplicaSet(rollout *v1alpha1.Rollout, rsList []*appsv1.ReplicaSet) *appsv1.ReplicaSet

FindNewReplicaSet returns the new RS this given rollout targets from the given list. Returns nil if the ReplicaSet does not exist in the list.

func FindOldReplicaSets 

func FindOldReplicaSets(rollout *v1alpha1.Rollout, rsList []*appsv1.ReplicaSet) []*appsv1.ReplicaSet

FindOldReplicaSets returns the old replica sets targeted by the given Rollout, with the given slice of RSes.

func GetActualReplicaCountForReplicaSets 

func GetActualReplicaCountForReplicaSets(replicaSets []*appsv1.ReplicaSet) int32

GetActualReplicaCountForReplicaSets returns the sum of actual replicas of the given replica sets.

func GetAvailableReplicaCountForReplicaSets 

func GetAvailableReplicaCountForReplicaSets(replicaSets []*appsv1.ReplicaSet) int32

GetAvailableReplicaCountForReplicaSets returns the number of available pods corresponding to the given replica sets.

func GetCurrentCanaryStep added in v0.2.0 

func GetCurrentCanaryStep(rollout *v1alpha1.Rollout) (*v1alpha1.CanaryStep, *int32)

GetCurrentCanaryStep returns the current canary step. If there are no steps or the rollout has already executed the last step, the func returns nil

func GetCurrentExperimentStep added in v0.6.0 

func GetCurrentExperimentStep(r *v1alpha1.Rollout) *v1alpha1.RolloutExperimentStep

GetCurrentExperimentStep grabs the latest Experiment step

func GetCurrentSetWeight added in v0.2.0 

func GetCurrentSetWeight(rollout *v1alpha1.Rollout) int32

GetCurrentSetWeight grabs the current setWeight used by the rollout by iterating backwards from the current step until it finds a setWeight step. The controller defaults to 100 if it iterates through all the steps with no setWeight or if there is no current step (i.e. the controller has already stepped through all the steps).

func GetPodTemplateHash added in v0.4.0 

func GetPodTemplateHash(rs *appsv1.ReplicaSet) string

GetPodTemplateHash returns the rollouts-pod-template-hash value from a ReplicaSet's labels

func GetReadyReplicaCountForReplicaSets 

func GetReadyReplicaCountForReplicaSets(replicaSets []*appsv1.ReplicaSet) int32

GetReadyReplicaCountForReplicaSets returns the number of ready pods corresponding to the given replica sets.

func GetReplicaCountForReplicaSets 

func GetReplicaCountForReplicaSets(replicaSets []*appsv1.ReplicaSet) int32

GetReplicaCountForReplicaSets returns the sum of Replicas of the given replica sets.

func GetReplicaSetByTemplateHash added in v0.3.1 

func GetReplicaSetByTemplateHash(allRS []*appsv1.ReplicaSet, podTemplateHash string) (*appsv1.ReplicaSet, []*appsv1.ReplicaSet)

GetReplicaSetByTemplateHash find the replicaset that matches the podTemplateHash

func GetReplicasForScaleDown added in v0.4.2 

func GetReplicasForScaleDown(rs *appsv1.ReplicaSet) int32

GetReplicasForScaleDown returns the number of replicas to consider for scaling down.

func GetStableRS added in v0.2.0 

func GetStableRS(rollout *v1alpha1.Rollout, newRS *appsv1.ReplicaSet, rslist []*appsv1.ReplicaSet) (*appsv1.ReplicaSet, []*appsv1.ReplicaSet)

func MaxRevision 

func MaxRevision(allRSs []*appsv1.ReplicaSet) int64

MaxRevision finds the highest revision in the replica sets

func MaxSurge added in v0.2.0 

func MaxSurge(rollout *v1alpha1.Rollout) int32

MaxSurge returns the maximum surge pods a rolling deployment can take.

func MaxUnavailable added in v0.2.0 

func MaxUnavailable(rollout *v1alpha1.Rollout) int32

MaxUnavailable returns the maximum unavailable pods a rolling deployment can take.

func NewRSNewReplicas 

func NewRSNewReplicas(rollout *v1alpha1.Rollout, allRSs []*appsv1.ReplicaSet, newRS *appsv1.ReplicaSet) (int32, error)

NewRSNewReplicas calculates the number of replicas a Rollout's new RS should have. When one of the followings is true, we're rolling out the deployment; otherwise, we're scaling it. 1) The new RS is saturated: newRS's replicas == deployment's replicas 2) Max number of pods allowed is reached: deployment's replicas + maxSurge == all RSs' replicas

func PodTemplateEqualIgnoreHash added in v0.4.0 

func PodTemplateEqualIgnoreHash(live, desired *corev1.PodTemplateSpec) bool

PodTemplateEqualIgnoreHash returns true if two given podTemplateSpec are equal, ignoring the diff in value of Labels[pod-template-hash] We ignore pod-template-hash because:

  1. The hash result would be different upon podTemplateSpec API changes (e.g. the addition of a new field will cause the hash code to change)
  2. The deployment template won't have hash labels

NOTE: This is a modified version of deploymentutil.EqualIgnoreHash, but modified to perform defaulting on the desired spec. This is so that defaulted fields by the replicaset controller factor into the comparison. The reason this is necessary, is because unlike the deployment controller, the rollout controller does not benefit/operate on a completely defaulted rollout object.

func PodTemplateOrStepsChanged added in v0.4.0 

func PodTemplateOrStepsChanged(rollout *v1alpha1.Rollout, newRS *appsv1.ReplicaSet) bool

PodTemplateOrStepsChanged detects if there is a change in either the pod template, or canary steps

func ReadyForPause added in v0.3.1 

func ReadyForPause(rollout *v1alpha1.Rollout, newRS *appsv1.ReplicaSet, allRSs []*appsv1.ReplicaSet) bool

func ResetCurrentStepIndex added in v0.2.0 

func ResetCurrentStepIndex(rollout *v1alpha1.Rollout) *int32

ResetCurrentStepIndex resets the index back to zero unless there are no steps

func Revision 

func Revision(obj runtime.Object) (int64, error)

Revision returns the revision number of the input object.

Types

type ReplicaSetsByRevisionNumber added in v0.5.0 

type ReplicaSetsByRevisionNumber []*appsv1.ReplicaSet

ReplicaSetsByRevisionNumber sorts a list of ReplicaSet by revision timestamp, using their creation timestamp as a tie breaker.

func (ReplicaSetsByRevisionNumber) Len added in v0.5.0 

func (o ReplicaSetsByRevisionNumber) Len() int

func (ReplicaSetsByRevisionNumber) Less added in v0.5.0 

func (o ReplicaSetsByRevisionNumber) Less(i, j int) bool

func (ReplicaSetsByRevisionNumber) Swap added in v0.5.0 

func (o ReplicaSetsByRevisionNumber) Swap(i, j int)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.