logical

package
v0.9.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 14, 2017 License: MPL-2.0 Imports: 20 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// The operations below are called per path
	CreateOperation         Operation = "create"
	ReadOperation                     = "read"
	UpdateOperation                   = "update"
	DeleteOperation                   = "delete"
	ListOperation                     = "list"
	HelpOperation                     = "help"
	AliasLookaheadOperation           = "alias-lookahead"

	// The operations below are called globally, the path is less relevant.
	RevokeOperation   Operation = "revoke"
	RenewOperation              = "renew"
	RollbackOperation           = "rollback"
)
View Source 
const (
	// HTTPContentType can be specified in the Data field of a Response
	// so that the HTTP front end can specify a custom Content-Type associated
	// with the HTTPRawBody. This can only be used for non-secrets, and should
	// be avoided unless absolutely necessary, such as implementing a specification.
	// The value must be a string.
	HTTPContentType = "http_content_type"

	// HTTPRawBody is the raw content of the HTTP body that goes with the HTTPContentType.
	// This can only be specified for non-secrets, and should should be similarly
	// avoided like the HTTPContentType. The value must be a byte slice.
	HTTPRawBody = "http_raw_body"

	// HTTPStatusCode is the response code of the HTTP body that goes with the HTTPContentType.
	// This can only be specified for non-secrets, and should should be similarly
	// avoided like the HTTPContentType. The value must be an integer.
	HTTPStatusCode = "http_status_code"
)

Variables

View Source 
var (
	// ErrUnsupportedOperation is returned if the operation is not supported
	// by the logical backend.
	ErrUnsupportedOperation = errors.New("unsupported operation")

	// ErrUnsupportedPath is returned if the path is not supported
	// by the logical backend.
	ErrUnsupportedPath = errors.New("unsupported path")

	// ErrInvalidRequest is returned if the request is invalid
	ErrInvalidRequest = errors.New("invalid request")

	// ErrPermissionDenied is returned if the client is not authorized
	ErrPermissionDenied = errors.New("permission denied")

	// ErrMultiAuthzPending is returned if the the request needs more
	// authorizations
	ErrMultiAuthzPending = errors.New("request needs further approval")
)
View Source 
var ErrReadOnly = errors.New("Cannot write to readonly storage")

ErrReadOnly is returned when a backend does not support writing. This can be caused by a read-only replica or secondary cluster operation.

Functions

func AdjustErrorStatusCode added in v0.7.0 

func AdjustErrorStatusCode(status *int, err error)

AdjustErrorStatusCode adjusts the status that will be sent in error conditions in a way that can be shared across http's respondError and other locations.

func ClearView added in v0.6.5 

func ClearView(view ClearableView) error

ClearView is used to delete all the keys in a view

func CollectKeys added in v0.6.5 

func CollectKeys(view ClearableView) ([]string, error)

CollectKeys is used to collect all the keys in a view

func RespondErrorCommon added in v0.7.0 

func RespondErrorCommon(req *Request, resp *Response, err error) (int, error)

RespondErrorCommon pulls most of the functionality from http's respondErrorCommon and some of http's handleLogical and makes it available to both the http package and elsewhere.

func ScanView added in v0.6.5 

func ScanView(view ClearableView, cb func(path string)) error

ScanView is used to scan all the keys in a view iteratively

func TestStorage 

func TestStorage(t *testing.T, s Storage)

TestStorage is a helper that can be used from unit tests to verify the behavior of a Storage impl.

Types

type Alias added in v0.9.0 

type Alias struct {
	// MountType is the backend mount's type to which this identity belongs
	MountType string `json:"mount_type" structs:"mount_type" mapstructure:"mount_type"`

	// MountAccessor is the identifier of the mount entry to which this
	// identity belongs
	MountAccessor string `json:"mount_accessor" structs:"mount_accessor" mapstructure:"mount_accessor"`

	// Name is the identifier of this identity in its authentication source
	Name string `json:"name" structs:"name" mapstructure:"name"`
}

Alias represents the information used by core to create implicit entity. Implicit entities get created when a client authenticates successfully from any of the authentication backends (except token backend).

type Auth 

type Auth struct {
	LeaseOptions

	// InternalData is JSON-encodable data that is stored with the auth struct.
	// This will be sent back during a Renew/Revoke for storing internal data
	// used for those operations.
	InternalData map[string]interface{} `json:"internal_data" mapstructure:"internal_data" structs:"internal_data"`

	// DisplayName is a non-security sensitive identifier that is
	// applicable to this Auth. It is used for logging and prefixing
	// of dynamic secrets. For example, DisplayName may be "armon" for
	// the github credential backend. If the client token is used to
	// generate a SQL credential, the user may be "github-armon-uuid".
	// This is to help identify the source without using audit tables.
	DisplayName string `json:"display_name" mapstructure:"display_name" structs:"display_name"`

	// Policies is the list of policies that the authenticated user
	// is associated with.
	Policies []string `json:"policies" mapstructure:"policies" structs:"policies"`

	// Metadata is used to attach arbitrary string-type metadata to
	// an authenticated user. This metadata will be outputted into the
	// audit log.
	Metadata map[string]string `json:"metadata" mapstructure:"metadata" structs:"metadata"`

	// ClientToken is the token that is generated for the authentication.
	// This will be filled in by Vault core when an auth structure is
	// returned. Setting this manually will have no effect.
	ClientToken string `json:"client_token" mapstructure:"client_token" structs:"client_token"`

	// Accessor is the identifier for the ClientToken. This can be used
	// to perform management functionalities (especially revocation) when
	// ClientToken in the audit logs are obfuscated. Accessor can be used
	// to revoke a ClientToken and to lookup the capabilities of the ClientToken,
	// both without actually knowing the ClientToken.
	Accessor string `json:"accessor" mapstructure:"accessor" structs:"accessor"`

	// Period indicates that the token generated using this Auth object
	// should never expire. The token should be renewed within the duration
	// specified by this period.
	Period time.Duration `json:"period" mapstructure:"period" structs:"period"`

	// Number of allowed uses of the issued token
	NumUses int `json:"num_uses" mapstructure:"num_uses" structs:"num_uses"`

	// EntityID is the identifier of the entity in identity store to which the
	// identity of the authenticating client belongs to.
	EntityID string `json:"entity_id" mapstructure:"entity_id" structs:"entity_id"`

	// Alias is the information about the authenticated client returned by
	// the auth backend
	Alias *Alias `json:"alias" mapstructure:"alias" structs:"alias"`

	// GroupAliases are the informational mappings of external groups which an
	// authenticated user belongs to. This is used to check if there are
	// mappings groups for the group aliases in identity store. For all the
	// matching groups, the entity ID of the user will be added.
	GroupAliases []*Alias `json:"group_aliases" mapstructure:"group_aliases" structs:"group_aliases"`
}

Auth is the resulting authentication information that is part of Response for credential backends.

func (*Auth) GoString 

func (a *Auth) GoString() string

type Backend 

type Backend interface {
	// HandleRequest is used to handle a request and generate a response.
	// The backends must check the operation type and handle appropriately.
	HandleRequest(*Request) (*Response, error)

	// SpecialPaths is a list of paths that are special in some way.
	// See PathType for the types of special paths. The key is the type
	// of the special path, and the value is a list of paths for this type.
	// This is not a regular expression but is an exact match. If the path
	// ends in '*' then it is a prefix-based match. The '*' can only appear
	// at the end.
	SpecialPaths() *Paths

	// System provides an interface to access certain system configuration
	// information, such as globally configured default and max lease TTLs.
	System() SystemView

	// Logger provides an interface to access the underlying logger. This
	// is useful when a struct embeds a Backend-implemented struct that
	// contains a private instance of logger.
	Logger() log.Logger

	// HandleExistenceCheck is used to handle a request and generate a response
	// indicating whether the given path exists or not; this is used to
	// understand whether the request must have a Create or Update capability
	// ACL applied. The first bool indicates whether an existence check
	// function was found for the backend; the second indicates whether, if an
	// existence check function was found, the item exists or not.
	HandleExistenceCheck(*Request) (bool, bool, error)

	// Cleanup is invoked during an unmount of a backend to allow it to
	// handle any cleanup like connection closing or releasing of file handles.
	Cleanup()

	// Initialize is invoked after a backend is created. It is the place to run
	// any operations requiring storage; these should not be in the factory.
	Initialize() error

	// InvalidateKey may be invoked when an object is modified that belongs
	// to the backend. The backend can use this to clear any caches or reset
	// internal state as needed.
	InvalidateKey(key string)

	// Setup is used to set up the backend based on the provided backend
	// configuration.
	Setup(*BackendConfig) error

	// Type returns the BackendType for the particular backend
	Type() BackendType

	// RegisterLicense performs backend license registration
	RegisterLicense(interface{}) error
}

Backend interface must be implemented to be "mountable" at a given path. Requests flow through a router which has various mount points that flow to a logical backend. The logic of each backend is flexible, and this is what allows materialized keys to function. There can be specialized logical backends for various upstreams (Consul, PostgreSQL, MySQL, etc) that can interact with remote APIs to generate keys dynamically. This interface also allows for a "procfs" like interaction, as internal state can be exposed by acting like a logical backend and being mounted.

type BackendConfig added in v0.2.0 

type BackendConfig struct {
	// View should not be stored, and should only be used for initialization
	StorageView Storage

	// The backend should use this logger. The log should not contain any secrets.
	Logger log.Logger

	// System provides a view into a subset of safe system information that
	// is useful for backends, such as the default/max lease TTLs
	System SystemView

	// Config is the opaque user configuration provided when mounting
	Config map[string]string
}

BackendConfig is provided to the factory to initialize the backend

func TestBackendConfig added in v0.4.0 

func TestBackendConfig() *BackendConfig

type BackendType added in v0.8.0 

type BackendType uint32

BackendType is the type of backend that is being implemented 

const (
	TypeUnknown    BackendType = 0 // This is also the zero-value for BackendType
	TypeLogical    BackendType = 1
	TypeCredential BackendType = 2
)

The these are the types of backends that can be derived from logical.Backend

func (BackendType) String added in v0.8.0 

func (b BackendType) String() string

Stringer implementation

type ClearableView added in v0.6.5 

type ClearableView interface {
	List(string) ([]string, error)
	Delete(string) error
}

type Connection 

type Connection struct {
	// RemoteAddr is the network address that sent the request.
	RemoteAddr string `json:"remote_addr"`

	// ConnState is the TLS connection state if applicable.
	ConnState *tls.ConnectionState `sentinel:""`
}

Connection represents the connection information for a request. This is present on the Request structure for credential backends.

type Factory 

type Factory func(*BackendConfig) (Backend, error)

Factory is the factory function to create a logical backend.

type HTTPAuth added in v0.6.0 

type HTTPAuth struct {
	ClientToken   string            `json:"client_token"`
	Accessor      string            `json:"accessor"`
	Policies      []string          `json:"policies"`
	Metadata      map[string]string `json:"metadata"`
	LeaseDuration int               `json:"lease_duration"`
	Renewable     bool              `json:"renewable"`
	EntityID      string            `json:"entity_id"`
}

type HTTPCodedError added in v0.3.0 

type HTTPCodedError interface {
	Error() string
	Code() int
}

func CodedError added in v0.3.0 

func CodedError(status int, msg string) HTTPCodedError

type HTTPResponse added in v0.6.0 

type HTTPResponse struct {
	RequestID     string                 `json:"request_id"`
	LeaseID       string                 `json:"lease_id"`
	Renewable     bool                   `json:"renewable"`
	LeaseDuration int                    `json:"lease_duration"`
	Data          map[string]interface{} `json:"data"`
	WrapInfo      *HTTPWrapInfo          `json:"wrap_info"`
	Warnings      []string               `json:"warnings"`
	Auth          *HTTPAuth              `json:"auth"`
}

func LogicalResponseToHTTPResponse added in v0.6.2 

func LogicalResponseToHTTPResponse(input *Response) *HTTPResponse

This logic was pulled from the http package so that it can be used for encoding wrapped responses as well. It simply translates the logical response to an http response, with the values we want and omitting the values we don't.

type HTTPSysInjector added in v0.6.1 

type HTTPSysInjector struct {
	Response *HTTPResponse
}

func (HTTPSysInjector) MarshalJSON added in v0.6.1 

func (h HTTPSysInjector) MarshalJSON() ([]byte, error)

type HTTPWrapInfo added in v0.6.0 

type HTTPWrapInfo struct {
	Token           string `json:"token"`
	Accessor        string `json:"accessor"`
	TTL             int    `json:"ttl"`
	CreationTime    string `json:"creation_time"`
	CreationPath    string `json:"creation_path"`
	WrappedAccessor string `json:"wrapped_accessor,omitempty"`
}

type InmemStorage 

type InmemStorage struct {
	sync.RWMutex
	// contains filtered or unexported fields
}

InmemStorage implements Storage and stores all data in memory. It is basically a straight copy of physical.Inmem, but it prevents backends from having to load all of physical's dependencies (which are legion) just to have some testing storage.

func (*InmemStorage) Delete 

func (s *InmemStorage) Delete(key string) error

func (*InmemStorage) Get 

func (s *InmemStorage) Get(key string) (*StorageEntry, error)

func (*InmemStorage) List 

func (s *InmemStorage) List(prefix string) ([]string, error)

func (*InmemStorage) Put 

func (s *InmemStorage) Put(entry *StorageEntry) error

type LeaseOptions 

type LeaseOptions struct {
	// Lease is the duration that this secret is valid for. Vault
	// will automatically revoke it after the duration.
	TTL time.Duration `json:"lease"`

	// Renewable, if true, means that this secret can be renewed.
	Renewable bool `json:"renewable"`

	// Increment will be the lease increment that the user requested.
	// This is only available on a Renew operation and has no effect
	// when returning a response.
	Increment time.Duration `json:"-"`

	// IssueTime is the time of issue for the original lease. This is
	// only available on a Renew operation and has no effect when returning
	// a response. It can be used to enforce maximum lease periods by
	// a logical backend.
	IssueTime time.Time `json:"-"`
}

LeaseOptions is an embeddable struct to capture common lease settings between a Secret and Auth

func (*LeaseOptions) ExpirationTime 

func (l *LeaseOptions) ExpirationTime() time.Time

ExpirationTime computes the time until expiration including the grace period

func (*LeaseOptions) LeaseEnabled 

func (l *LeaseOptions) LeaseEnabled() bool

LeaseEnabled checks if leasing is enabled

func (*LeaseOptions) LeaseTotal 

func (l *LeaseOptions) LeaseTotal() time.Duration

LeaseTotal is the lease duration with a guard against a negative TTL

type Operation 

type Operation string

Operation is an enum that is used to specify the type of request being made

type Paths 

type Paths struct {
	// Root are the paths that require a root token to access
	Root []string

	// Unauthenticated are the paths that can be accessed without any auth.
	Unauthenticated []string

	// LocalStorage are paths (prefixes) that are local to this instance; this
	// indicates that these paths should not be replicated
	LocalStorage []string

	// SealWrapStorage are storage paths that, when using a capable seal,
	// should be seal wrapped with extra encryption. It is exact matching
	// unless it ends with '/' in which case it will be treated as a prefix.
	SealWrapStorage []string
}

Paths is the structure of special paths that is used for SpecialPaths.

type ReplicationCodedError added in v0.7.0 

type ReplicationCodedError struct {
	Msg  string
	Code int
}

This is a new type declared to not cause potential compatibility problems if the logic around the CodedError changes; in particular for logical request paths it is basically ignored, and changing that behavior might cause unforseen issues.

func (*ReplicationCodedError) Error added in v0.7.0 

func (r *ReplicationCodedError) Error() string

type Request 

type Request struct {
	// Id is the uuid associated with each request
	ID string `json:"id" structs:"id" mapstructure:"id" sentinel:""`

	// If set, the name given to the replication secondary where this request
	// originated
	ReplicationCluster string `json:"replication_cluster" structs:"replication_cluster" mapstructure:"replication_cluster" sentinel:""`

	// Operation is the requested operation type
	Operation Operation `json:"operation" structs:"operation" mapstructure:"operation"`

	// Path is the part of the request path not consumed by the
	// routing. As an example, if the original request path is "prod/aws/foo"
	// and the AWS logical backend is mounted at "prod/aws/", then the
	// final path is "foo" since the mount prefix is trimmed.
	Path string `json:"path" structs:"path" mapstructure:"path" sentinel:""`

	// Request data is an opaque map that must have string keys.
	Data map[string]interface{} `json:"map" structs:"data" mapstructure:"data"`

	// Storage can be used to durably store and retrieve state.
	Storage Storage `json:"-" sentinel:""`

	// Secret will be non-nil only for Revoke and Renew operations
	// to represent the secret that was returned prior.
	Secret *Secret `json:"secret" structs:"secret" mapstructure:"secret" sentinel:""`

	// Auth will be non-nil only for Renew operations
	// to represent the auth that was returned prior.
	Auth *Auth `json:"auth" structs:"auth" mapstructure:"auth" sentinel:""`

	// Headers will contain the http headers from the request. This value will
	// be used in the audit broker to ensure we are auditing only the allowed
	// headers.
	Headers map[string][]string `json:"headers" structs:"headers" mapstructure:"headers" sentinel:""`

	// Connection will be non-nil only for credential providers to
	// inspect the connection information and potentially use it for
	// authentication/protection.
	Connection *Connection `json:"connection" structs:"connection" mapstructure:"connection"`

	// ClientToken is provided to the core so that the identity
	// can be verified and ACLs applied. This value is passed
	// through to the logical backends but after being salted and
	// hashed.
	ClientToken string `json:"client_token" structs:"client_token" mapstructure:"client_token" sentinel:""`

	// ClientTokenAccessor is provided to the core so that the it can get
	// logged as part of request audit logging.
	ClientTokenAccessor string `json:"client_token_accessor" structs:"client_token_accessor" mapstructure:"client_token_accessor" sentinel:""`

	// DisplayName is provided to the logical backend to help associate
	// dynamic secrets with the source entity. This is not a sensitive
	// name, but is useful for operators.
	DisplayName string `json:"display_name" structs:"display_name" mapstructure:"display_name" sentinel:""`

	// MountPoint is provided so that a logical backend can generate
	// paths relative to itself. The `Path` is effectively the client
	// request path with the MountPoint trimmed off.
	MountPoint string `json:"mount_point" structs:"mount_point" mapstructure:"mount_point" sentinel:""`

	// MountType is provided so that a logical backend can make decisions
	// based on the specific mount type (e.g., if a mount type has different
	// aliases, generating different defaults depending on the alias)
	MountType string `json:"mount_type" structs:"mount_type" mapstructure:"mount_type" sentinel:""`

	// MountAccessor is provided so that identities returned by the authentication
	// backends can be tied to the mount it belongs to.
	MountAccessor string `json:"mount_accessor" structs:"mount_accessor" mapstructure:"mount_accessor" sentinel:""`

	// WrapInfo contains requested response wrapping parameters
	WrapInfo *RequestWrapInfo `json:"wrap_info" structs:"wrap_info" mapstructure:"wrap_info" sentinel:""`

	// ClientTokenRemainingUses represents the allowed number of uses left on the
	// token supplied
	ClientTokenRemainingUses int `json:"client_token_remaining_uses" structs:"client_token_remaining_uses" mapstructure:"client_token_remaining_uses"`

	// EntityID is the identity of the caller extracted out of the token used
	// to make this request
	EntityID string `json:"entity_id" structs:"entity_id" mapstructure:"entity_id" sentinel:""`

	// PolicyOverride indicates that the requestor wishes to override
	// soft-mandatory Sentinel policies
	PolicyOverride bool `json:"policy_override" structs:"policy_override" mapstructure:"policy_override"`

	// Whether the request is unauthenticated, as in, had no client token
	// attached. Useful in some situations where the client token is not made
	// accessible.
	Unauthenticated bool `json:"unauthenticated" structs:"unauthenticated" mapstructure:"unauthenticated"`
	// contains filtered or unexported fields
}

Request is a struct that stores the parameters and context of a request being made to Vault. It is used to abstract the details of the higher level request protocol from the handlers.

Note: Many of these have Sentinel disabled because they are values populated by the router after policy checks; the token namespace would be the right place to access them via Sentinel

func RenewAuthRequest 

func RenewAuthRequest(
	path string, auth *Auth, data map[string]interface{}) *Request

RenewAuthRequest creates the structure of the renew request for an auth.

func RenewRequest 

func RenewRequest(
	path string, secret *Secret, data map[string]interface{}) *Request

RenewRequest creates the structure of the renew request.

func RevokeRequest 

func RevokeRequest(
	path string, secret *Secret, data map[string]interface{}) *Request

RevokeRequest creates the structure of the revoke request.

func RollbackRequest 

func RollbackRequest(path string) *Request

RollbackRequest creates the structure of the revoke request.

func TestRequest 

func TestRequest(t *testing.T, op Operation, path string) *Request

TestRequest is a helper to create a purely in-memory Request struct.

func (*Request) Get 

func (r *Request) Get(key string) interface{}

Get returns a data field and guards for nil Data

func (*Request) GetString 

func (r *Request) GetString(key string) string

GetString returns a data field as a string

func (*Request) GoString 

func (r *Request) GoString() string

func (*Request) LastRemoteWAL added in v0.7.0 

func (r *Request) LastRemoteWAL() uint64

func (*Request) SentinelGet added in v0.9.0 

func (r *Request) SentinelGet(key string) (interface{}, error)

func (*Request) SentinelKeys added in v0.9.0 

func (r *Request) SentinelKeys() []string

func (*Request) SetLastRemoteWAL added in v0.7.0 

func (r *Request) SetLastRemoteWAL(last uint64)

type RequestWrapInfo added in v0.6.5 

type RequestWrapInfo struct {
	// Setting to non-zero specifies that the response should be wrapped.
	// Specifies the desired TTL of the wrapping token.
	TTL time.Duration `json:"ttl" structs:"ttl" mapstructure:"ttl" sentinel:""`

	// The format to use for the wrapped response; if not specified it's a bare
	// token
	Format string `json:"format" structs:"format" mapstructure:"format" sentinel:""`

	// A flag to conforming backends that data for a given request should be
	// seal wrapped
	SealWrap bool `json:"seal_wrap" structs:"seal_wrap" mapstructure:"seal_wrap" sentinel:""`
}

RequestWrapInfo is a struct that stores information about desired response and seal wrapping behavior

func (*RequestWrapInfo) SentinelGet added in v0.9.0 

func (r *RequestWrapInfo) SentinelGet(key string) (interface{}, error)

func (*RequestWrapInfo) SentinelKeys added in v0.9.0 

func (r *RequestWrapInfo) SentinelKeys() []string

type Response 

type Response struct {
	// Secret, if not nil, denotes that this response represents a secret.
	Secret *Secret `json:"secret" structs:"secret" mapstructure:"secret"`

	// Auth, if not nil, contains the authentication information for
	// this response. This is only checked and means something for
	// credential backends.
	Auth *Auth `json:"auth" structs:"auth" mapstructure:"auth"`

	// Response data is an opaque map that must have string keys. For
	// secrets, this data is sent down to the user as-is. To store internal
	// data that you don't want the user to see, store it in
	// Secret.InternalData.
	Data map[string]interface{} `json:"data" structs:"data" mapstructure:"data"`

	// Redirect is an HTTP URL to redirect to for further authentication.
	// This is only valid for credential backends. This will be blanked
	// for any logical backend and ignored.
	Redirect string `json:"redirect" structs:"redirect" mapstructure:"redirect"`

	// Warnings allow operations or backends to return warnings in response
	// to user actions without failing the action outright.
	Warnings []string `json:"warnings" structs:"warnings" mapstructure:"warnings"`

	// Information for wrapping the response in a cubbyhole
	WrapInfo *wrapping.ResponseWrapInfo `json:"wrap_info" structs:"wrap_info" mapstructure:"wrap_info"`
}

Response is a struct that stores the response of a request. It is used to abstract the details of the higher level request protocol.

func ErrorResponse 

func ErrorResponse(text string) *Response

ErrorResponse is used to format an error response

func HTTPResponseToLogicalResponse added in v0.6.2 

func HTTPResponseToLogicalResponse(input *HTTPResponse) *Response

func HelpResponse 

func HelpResponse(text string, seeAlso []string) *Response

HelpResponse is used to format a help response

func ListResponse 

func ListResponse(keys []string) *Response

ListResponse is used to format a response to a list operation.

func ListResponseWithInfo added in v0.9.0 

func ListResponseWithInfo(keys []string, keyInfo map[string]interface{}) *Response

ListResponseWithInfo is used to format a response to a list operation and return the keys as well as a map with corresponding key info.

func (*Response) AddWarning added in v0.4.0 

func (r *Response) AddWarning(warning string)

AddWarning adds a warning into the response's warning list

func (*Response) Error added in v0.6.1 

func (r *Response) Error() error

func (*Response) IsError 

func (r *Response) IsError() bool

IsError returns true if this response seems to indicate an error.

type Secret 

type Secret struct {
	LeaseOptions

	// InternalData is JSON-encodable data that is stored with the secret.
	// This will be sent back during a Renew/Revoke for storing internal data
	// used for those operations.
	InternalData map[string]interface{} `json:"internal_data" sentinel:""`

	// LeaseID is the ID returned to the user to manage this secret.
	// This is generated by Vault core. Any set value will be ignored.
	// For requests, this will always be blank.
	LeaseID string `sentinel:""`
}

Secret represents the secret part of a response.

func (*Secret) GoString 

func (s *Secret) GoString() string

func (*Secret) Validate 

func (s *Secret) Validate() error

type StaticSystemView added in v0.3.0 

type StaticSystemView struct {
	DefaultLeaseTTLVal  time.Duration
	MaxLeaseTTLVal      time.Duration
	SudoPrivilegeVal    bool
	TaintedVal          bool
	CachingDisabledVal  bool
	Primary             bool
	EnableMlock         bool
	ReplicationStateVal consts.ReplicationState
}

func TestSystemView added in v0.4.0 

func TestSystemView() *StaticSystemView

func (StaticSystemView) CachingDisabled added in v0.6.0 

func (d StaticSystemView) CachingDisabled() bool

func (StaticSystemView) DefaultLeaseTTL added in v0.3.0 

func (d StaticSystemView) DefaultLeaseTTL() time.Duration

func (StaticSystemView) LookupPlugin added in v0.7.1 

func (d StaticSystemView) LookupPlugin(name string) (*pluginutil.PluginRunner, error)

func (StaticSystemView) MaxLeaseTTL added in v0.3.0 

func (d StaticSystemView) MaxLeaseTTL() time.Duration

func (StaticSystemView) MlockEnabled added in v0.7.1 

func (d StaticSystemView) MlockEnabled() bool

func (StaticSystemView) ReplicationState added in v0.6.5 

func (d StaticSystemView) ReplicationState() consts.ReplicationState

func (StaticSystemView) ResponseWrapData added in v0.7.1 

func (d StaticSystemView) ResponseWrapData(data map[string]interface{}, ttl time.Duration, jwt bool) (*wrapping.ResponseWrapInfo, error)

func (StaticSystemView) SudoPrivilege added in v0.3.0 

func (d StaticSystemView) SudoPrivilege(path string, token string) bool

func (StaticSystemView) Tainted added in v0.5.0 

func (d StaticSystemView) Tainted() bool

type StatusBadRequest added in v0.7.0 

type StatusBadRequest struct {
	Err string
}

Struct to identify user input errors. This is helpful in responding the appropriate status codes to clients from the HTTP endpoints.

func (*StatusBadRequest) Error added in v0.7.0 

func (s *StatusBadRequest) Error() string

Implementing error interface

type Storage 

type Storage interface {
	List(prefix string) ([]string, error)
	Get(string) (*StorageEntry, error)
	Put(*StorageEntry) error
	Delete(string) error
}

Storage is the way that logical backends are able read/write data.

type StorageEntry 

type StorageEntry struct {
	Key      string
	Value    []byte
	SealWrap bool
}

StorageEntry is the entry for an item in a Storage implementation.

func StorageEntryJSON 

func StorageEntryJSON(k string, v interface{}) (*StorageEntry, error)

StorageEntryJSON creates a StorageEntry with a JSON-encoded value.

func (*StorageEntry) DecodeJSON 

func (e *StorageEntry) DecodeJSON(out interface{}) error

DecodeJSON decodes the 'Value' present in StorageEntry.

type SystemView added in v0.3.0 

type SystemView interface {
	// DefaultLeaseTTL returns the default lease TTL set in Vault configuration
	DefaultLeaseTTL() time.Duration

	// MaxLeaseTTL returns the max lease TTL set in Vault configuration; backend
	// authors should take care not to issue credentials that last longer than
	// this value, as Vault will revoke them
	MaxLeaseTTL() time.Duration

	// SudoPrivilege returns true if given path has sudo privileges
	// for the given client token
	SudoPrivilege(path string, token string) bool

	// Returns true if the mount is tainted. A mount is tainted if it is in the
	// process of being unmounted. This should only be used in special
	// circumstances; a primary use-case is as a guard in revocation functions.
	// If revocation of a backend's leases fails it can keep the unmounting
	// process from being successful. If the reason for this failure is not
	// relevant when the mount is tainted (for instance, saving a CRL to disk
	// when the stored CRL will be removed during the unmounting process
	// anyways), we can ignore the errors to allow unmounting to complete.
	Tainted() bool

	// Returns true if caching is disabled. If true, no caches should be used,
	// despite known slowdowns.
	CachingDisabled() bool

	// ReplicationState indicates the state of cluster replication
	ReplicationState() consts.ReplicationState

	// ResponseWrapData wraps the given data in a cubbyhole and returns the
	// token used to unwrap.
	ResponseWrapData(data map[string]interface{}, ttl time.Duration, jwt bool) (*wrapping.ResponseWrapInfo, error)

	// LookupPlugin looks into the plugin catalog for a plugin with the given
	// name. Returns a PluginRunner or an error if a plugin can not be found.
	LookupPlugin(string) (*pluginutil.PluginRunner, error)

	// MlockEnabled returns the configuration setting for enabling mlock on
	// plugins.
	MlockEnabled() bool
}

SystemView exposes system configuration information in a safe way for logical backends to consume

Source Files

View all Source files

Directories

Path Synopsis
mock
mock/mock-plugin

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.