gc

package
v0.0.0-...-c5860aa Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 29, 2017 License: BSD-3-Clause Imports: 29 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	WORDBITS  = 32
	WORDMASK  = WORDBITS - 1
	WORDSHIFT = 5
)
View Source 
const (
	EscFuncUnknown = 0 + iota
	EscFuncPlanned
	EscFuncStarted
	EscFuncTagged
)
View Source 
const (
	EscUnknown = iota
	EscNone    // Does not escape to heap, result, or parameters.
	EscReturn  // Is returned or reachable from returned.
	EscScope   // Allocated in an inner loop scope, assigned to an outer loop scope,
	// which allows the construction of non-escaping but arbitrarily large linked
	// data structures (i.e., not eligible for allocation in a fixed-size stack frame).
	EscHeap           // Reachable from the heap
	EscNever          // By construction will not escape.
	EscBits           = 3
	EscMask           = (1 << EscBits) - 1
	EscContentEscapes = 1 << EscBits // value obtained by indirect of parameter escapes to heap
	EscReturnBits     = EscBits + 1
)

Escape constants are numbered in order of increasing "escapiness" to help make inferences be monotonic. With the exception of EscNever which is sticky, eX < eY means that eY is more exposed than eX, and hence replaces it in a conservative analysis.

View Source 
const (
	FErr = iota
	FDbg
	FTypeId
)

*Sym, *Type, and *Node types use the flags below to set the format mode

View Source 
const (
	UINF            = 100
	BADWIDTH        = -1000000000
	MaxStackVarSize = 10 * 1024 * 1024
)
View Source 
const (
	// Pseudo-op, like TEXT, GLOBL, TYPE, PCDATA, FUNCDATA.
	Pseudo = 1 << 1

	// There's nothing to say about the instruction,
	// but it's still okay to see.
	OK = 1 << 2

	// Size of right-side write, or right-side read if no write.
	SizeB = 1 << 3
	SizeW = 1 << 4
	SizeL = 1 << 5
	SizeQ = 1 << 6
	SizeF = 1 << 7
	SizeD = 1 << 8

	// Left side (Prog.from): address taken, read, write.
	LeftAddr  = 1 << 9
	LeftRead  = 1 << 10
	LeftWrite = 1 << 11

	// Register in middle (Prog.reg); only ever read. (arm, ppc64)
	RegRead    = 1 << 12
	CanRegRead = 1 << 13

	// Right side (Prog.to): address taken, read, write.
	RightAddr  = 1 << 14
	RightRead  = 1 << 15
	RightWrite = 1 << 16

	// Instruction kinds
	Move  = 1 << 17 // straight move
	Conv  = 1 << 18 // size conversion
	Cjmp  = 1 << 19 // conditional jump
	Break = 1 << 20 // breaks control flow (no fallthrough)
	Call  = 1 << 21 // function call
	Jump  = 1 << 22 // jump
	Skip  = 1 << 23 // data instruction

	// Set, use, or kill of carry bit.
	// Kill means we never look at the carry bit after this kind of instruction.
	// Originally for understanding ADC, RCR, and so on, but now also
	// tracks set, use, and kill of the zero and overflow bits as well.
	// TODO rename to {Set,Use,Kill}Flags
	SetCarry  = 1 << 24
	UseCarry  = 1 << 25
	KillCarry = 1 << 26

	// Special cases for register use. (amd64, 386)
	ShiftCX  = 1 << 27 // possible shift by CX
	ImulAXDX = 1 << 28 // possible multiply into DX:AX

	// Instruction updates whichever of from/to is type D_OREG. (ppc64)
	PostInc = 1 << 29

	// Optional 3rd input operand, only ever read.
	From3Read = 1 << 30
)
View Source 
const (
	EOF = -1
	BOM = 0xFEFF
)
View Source 
const (

	// names and literals
	LNAME = utf8.RuneSelf + iota
	LLITERAL

	// operator-based operations
	LOPER
	LASOP
	LINCOP

	// miscellaneous
	LCOLAS
	LCOMM
	LDDD

	// keywords
	LBREAK
	LCASE
	LCHAN
	LCONST
	LCONTINUE
	LDEFAULT
	LDEFER
	LELSE
	LFALL
	LFOR
	LFUNC
	LGO
	LGOTO
	LIF
	LIMPORT
	LINTERFACE
	LMAP
	LPACKAGE
	LRANGE
	LRETURN
	LSELECT
	LSTRUCT
	LSWITCH
	LTYPE
	LVAR

	LIGNORE
)
View Source 
const (
	// Maximum size in bits for Mpints before signalling
	// overflow and also mantissa precision for Mpflts.
	Mpprec = 512
	// Turn on for constant arithmetic debugging output.
	Mpdebug = false
)
View Source 
const (
	UNVISITED = 0
	VISITED   = 1
)
View Source 
const (
	H0 = 2166136261
	Hp = 16777619
)

FNV-1 hash function constants.

View Source 
const (
	BUCKETSIZE = 8
	MAXKEYSIZE = 128
	MAXVALSIZE = 128
)

Builds a type representing a Bucket structure for the given map type. This type is not visible to users - we include only enough information to generate a correct GC program for it. Make sure this stays in sync with ../../../../runtime/hashmap.go!

View Source 
const (
	InitNotStarted = 0
	InitDone       = 1
	InitPending    = 2
)

static initialization

View Source 
const (
	OXXX = Op(iota)

	// names
	ONAME    // var, const or func name
	ONONAME  // unnamed arg or return value: f(int, string) (int, error) { etc }
	OTYPE    // type name
	OPACK    // import
	OLITERAL // literal

	// expressions
	OADD             // Left + Right
	OSUB             // Left - Right
	OOR              // Left | Right
	OXOR             // Left ^ Right
	OADDSTR          // +{List} (string addition, list elements are strings)
	OADDR            // &Left
	OANDAND          // Left && Right
	OAPPEND          // append(List)
	OARRAYBYTESTR    // Type(Left) (Type is string, Left is a []byte)
	OARRAYBYTESTRTMP // Type(Left) (Type is string, Left is a []byte, ephemeral)
	OARRAYRUNESTR    // Type(Left) (Type is string, Left is a []rune)
	OSTRARRAYBYTE    // Type(Left) (Type is []byte, Left is a string)
	OSTRARRAYBYTETMP // Type(Left) (Type is []byte, Left is a string, ephemeral)
	OSTRARRAYRUNE    // Type(Left) (Type is []rune, Left is a string)
	OAS              // Left = Right or (if Colas=true) Left := Right
	OAS2             // List = Rlist (x, y, z = a, b, c)
	OAS2FUNC         // List = Rlist (x, y = f())
	OAS2RECV         // List = Rlist (x, ok = <-c)
	OAS2MAPR         // List = Rlist (x, ok = m["foo"])
	OAS2DOTTYPE      // List = Rlist (x, ok = I.(int))
	OASOP            // Left Etype= Right (x += y)
	OASWB            // Left = Right (with write barrier)
	OCALL            // Left(List) (function call, method call or type conversion)
	OCALLFUNC        // Left(List) (function call f(args))
	OCALLMETH        // Left(List) (direct method call x.Method(args))
	OCALLINTER       // Left(List) (interface method call x.Method(args))
	OCALLPART        // Left.Right (method expression x.Method, not called)
	OCAP             // cap(Left)
	OCLOSE           // close(Left)
	OCLOSURE         // func Type { Body } (func literal)
	OCMPIFACE        // Left Etype Right (interface comparison, x == y or x != y)
	OCMPSTR          // Left Etype Right (string comparison, x == y, x < y, etc)
	OCOMPLIT         // Right{List} (composite literal, not yet lowered to specific form)
	OMAPLIT          // Type{List} (composite literal, Type is map)
	OSTRUCTLIT       // Type{List} (composite literal, Type is struct)
	OARRAYLIT        // Type{List} (composite literal, Type is array)
	OSLICELIT        // Type{List} (composite literal, Type is slice)
	OPTRLIT          // &Left (left is composite literal)
	OCONV            // Type(Left) (type conversion)
	OCONVIFACE       // Type(Left) (type conversion, to interface)
	OCONVNOP         // Type(Left) (type conversion, no effect)
	OCOPY            // copy(Left, Right)
	ODCL             // var Left (declares Left of type Left.Type)

	// Used during parsing but don't last.
	ODCLFUNC  // func f() or func (r) f()
	ODCLFIELD // struct field, interface field, or func/method argument/return value.
	ODCLCONST // const pi = 3.14
	ODCLTYPE  // type Int int

	ODELETE    // delete(Left, Right)
	ODOT       // Left.Sym (Left is of struct type)
	ODOTPTR    // Left.Sym (Left is of pointer to struct type)
	ODOTMETH   // Left.Sym (Left is non-interface, Right is method name)
	ODOTINTER  // Left.Sym (Left is interface, Right is method name)
	OXDOT      // Left.Sym (before rewrite to one of the preceding)
	ODOTTYPE   // Left.Right or Left.Type (.Right during parsing, .Type once resolved)
	ODOTTYPE2  // Left.Right or Left.Type (.Right during parsing, .Type once resolved; on rhs of OAS2DOTTYPE)
	OEQ        // Left == Right
	ONE        // Left != Right
	OLT        // Left < Right
	OLE        // Left <= Right
	OGE        // Left >= Right
	OGT        // Left > Right
	OIND       // *Left
	OINDEX     // Left[Right] (index of array or slice)
	OINDEXMAP  // Left[Right] (index of map)
	OKEY       // Left:Right (key:value in struct/array/map literal, or slice index pair)
	OIDATA     // data word of an interface value in Left; TODO: move next to OITAB once it is easier to regenerate the binary blob in builtin.go (issues 15835, 15839)
	OLEN       // len(Left)
	OMAKE      // make(List) (before type checking converts to one of the following)
	OMAKECHAN  // make(Type, Left) (type is chan)
	OMAKEMAP   // make(Type, Left) (type is map)
	OMAKESLICE // make(Type, Left, Right) (type is slice)
	OMUL       // Left * Right
	ODIV       // Left / Right
	OMOD       // Left % Right
	OLSH       // Left << Right
	ORSH       // Left >> Right
	OAND       // Left & Right
	OANDNOT    // Left &^ Right
	ONEW       // new(Left)
	ONOT       // !Left
	OCOM       // ^Left
	OPLUS      // +Left
	OMINUS     // -Left
	OOROR      // Left || Right
	OPANIC     // panic(Left)
	OPRINT     // print(List)
	OPRINTN    // println(List)
	OPAREN     // (Left)
	OSEND      // Left <- Right
	OSLICE     // Left[Right.Left : Right.Right] (Left is untypechecked or slice; Right.Op==OKEY)
	OSLICEARR  // Left[Right.Left : Right.Right] (Left is array)
	OSLICESTR  // Left[Right.Left : Right.Right] (Left is string)
	OSLICE3    // Left[R.Left : R.R.Left : R.R.R] (R=Right; Left is untypedchecked or slice; R.Op and R.R.Op==OKEY)
	OSLICE3ARR // Left[R.Left : R.R.Left : R.R.R] (R=Right; Left is array; R.Op and R.R.Op==OKEY)
	ORECOVER   // recover()
	ORECV      // <-Left
	ORUNESTR   // Type(Left) (Type is string, Left is rune)
	OSELRECV   // Left = <-Right.Left: (appears as .Left of OCASE; Right.Op == ORECV)
	OSELRECV2  // List = <-Right.Left: (apperas as .Left of OCASE; count(List) == 2, Right.Op == ORECV)
	OIOTA      // iota
	OREAL      // real(Left)
	OIMAG      // imag(Left)
	OCOMPLEX   // complex(Left, Right)

	// statements
	OBLOCK    // { List } (block of code)
	OBREAK    // break
	OCASE     // case Left or List[0]..List[1]: Nbody (select case after processing; Left==nil and List==nil means default)
	OXCASE    // case List: Nbody (select case before processing; List==nil means default)
	OCONTINUE // continue
	ODEFER    // defer Left (Left must be call)
	OEMPTY    // no-op (empty statement)
	OFALL     // fallthrough (after processing)
	OXFALL    // fallthrough (before processing)
	OFOR      // for Ninit; Left; Right { Nbody }
	OGOTO     // goto Left
	OIF       // if Ninit; Left { Nbody } else { Rlist }
	OLABEL    // Left:
	OPROC     // go Left (Left must be call)
	ORANGE    // for List = range Right { Nbody }
	ORETURN   // return List
	OSELECT   // select { List } (List is list of OXCASE or OCASE)
	OSWITCH   // switch Ninit; Left { List } (List is a list of OXCASE or OCASE)
	OTYPESW   // List = Left.(type) (appears as .Left of OSWITCH)

	// types
	OTCHAN   // chan int
	OTMAP    // map[string]int
	OTSTRUCT // struct{}
	OTINTER  // interface{}
	OTFUNC   // func()
	OTARRAY  // []int, [8]int, [N]int or [...]int

	// misc
	ODDD        // func f(args ...int) or f(l...) or var a = [...]int{0, 1, 2}.
	ODDDARG     // func f(args ...int), introduced by escape analysis.
	OINLCALL    // intermediary representation of an inlined call.
	OEFACE      // itable and data words of an empty-interface value.
	OITAB       // itable word of an interface value.
	OSPTR       // base pointer of a slice or string.
	OCLOSUREVAR // variable reference at beginning of closure function
	OCFUNC      // reference to c function pointer (not go func value)
	OCHECKNIL   // emit code to ensure pointer/interface not nil
	OVARKILL    // variable is dead
	OVARLIVE    // variable is alive

	// thearch-specific registers
	OREGISTER // a register, such as AX.
	OINDREG   // offset plus indirect of a register, such as 8(SP).

	// arch-specific opcodes
	OCMP    // compare: ACMP.
	ODEC    // decrement: ADEC.
	OINC    // increment: AINC.
	OEXTEND // extend: ACWD/ACDQ/ACQO.
	OHMUL   // high mul: AMUL/AIMUL for unsigned/signed (OMUL uses AIMUL for both).
	OLROT   // left rotate: AROL.
	ORROTC  // right rotate-carry: ARCR.
	ORETJMP // return to other function
	OPS     // compare parity set (for x86 NaN check)
	OPC     // compare parity clear (for x86 NaN check)
	OSQRT   // sqrt(float64), on systems that have hw support
	OGETG   // runtime.getg() (read g pointer)

	OEND
)

Node ops.

View Source 
const (
	Txxx = iota

	TINT8
	TUINT8
	TINT16
	TUINT16
	TINT32
	TUINT32
	TINT64
	TUINT64
	TINT
	TUINT
	TUINTPTR

	TCOMPLEX64
	TCOMPLEX128

	TFLOAT32
	TFLOAT64

	TBOOL

	TPTR32
	TPTR64

	TFUNC
	TSLICE
	TARRAY
	TSTRUCT
	TCHAN
	TMAP
	TINTER
	TFORW
	TANY
	TSTRING
	TUNSAFEPTR

	// pseudo-types for literals
	TIDEAL
	TNIL
	TBLANK

	// pseudo-types for frame layout
	TFUNCARGS
	TCHANARGS
	TINTERMETH

	// pseudo-types for import/export
	TDDDFIELD // wrapper: contained type is a ... field

	NTYPE
)
View Source 
const (
	Etop      = 1 << iota // evaluated at statement level
	Erv                   // evaluated in value context
	Etype                 // evaluated in type context
	Ecall                 // call-only expressions are ok
	Efnstruct             // multivalue function returns are ok
	Easgn                 // assigning to expression
	Ecomplit              // type in composite literal
)
View Source 
const (
	ArhdrSize = 60
)

architecture-independent object file output

View Source 
const (
	MinLevel = -2
)

There appear to be some loops in the escape graph, causing arbitrary recursion into deeper and deeper levels. Cut this off safely by making minLevel sticky: once you get that deep, you cannot go down any further but you also cannot go up any further. This is a conservative fix. Making minLevel smaller (more negative) would handle more complex chains of indirections followed by address-of operations, at the cost of repeating the traversal once for each additional allowed level when a loop is encountered. Using -2 suffices to pass all the tests we have written so far, which we assume matches the level of complexity we want the escape analysis code to handle.

View Source 
const NOTALOOPDEPTH = -1

Variables

View Source 
var (
	Debug_append  int
	Debug_closure int
	Debug_panic   int
	Debug_slice   int
	Debug_wb      int
)
View Source 
var Ctxt *obj.Link
View Source 
var Debug [256]int
View Source 
var Debug_checknil int
View Source 
var (
	Debug_export int // if set, print debugging information about export data

)
View Source 
var Debug_gcprog int // set by -d gcprog
View Source 
var Debug_typeassert int
View Source 
var Maxarg int64
View Source 
var Nacl bool
View Source 
var Pc *obj.Prog
View Source 
var Stksize int64 // stack size for current frame
View Source 
var Types [NTYPE]*Type

Types stores pointers to predeclared named types.

It also stores pointers to several special types:

  • Types[TANY] is the placeholder "any" type recognized by substArgTypes.
  • Types[TBLANK] represents the blank variable's type.
  • Types[TIDEAL] represents untyped numeric constants.
  • Types[TNIL] represents the predeclared "nil" value's type.
  • Types[TUNSAFEPTR] is package unsafe's Pointer type.
View Source 
var Widthint int
View Source 
var Widthptr int
View Source 
var Widthreg int

Functions

func AddAux 

func AddAux(a *obj.Addr, v *ssa.Value)

AddAux adds the offset in the aux fields (AuxInt and Aux) of v to a.

func AddAux2 

func AddAux2(a *obj.Addr, v *ssa.Value, offset int64)

func Afunclit 

func Afunclit(a *obj.Addr, n *Node)

func Appendpp 

func Appendpp(p *obj.Prog, as obj.As, ftype obj.AddrType, freg int16, foffset int64, ttype obj.AddrType, treg int16, toffset int64) *obj.Prog

func AuxOffset 

func AuxOffset(v *ssa.Value) (offset int64)

func CheckLoweredGetClosurePtr 

func CheckLoweredGetClosurePtr(v *ssa.Value)

CheckLoweredGetClosurePtr checks that v is the first instruction in the function's entry block. The output of LoweredGetClosurePtr is generally hardwired to the correct register. That register contains the closure pointer on closure entry.

func CheckLoweredPhi 

func CheckLoweredPhi(v *ssa.Value)

CheckLoweredPhi checks that regalloc and stackalloc correctly handled phi values. Called during ssaGenValue.

func Clearp 

func Clearp(p *obj.Prog)

func Dump 

func Dump(s string, n *Node)

func Exit 

func Exit(code int)

func Fatalf 

func Fatalf(fmt_ string, args ...interface{})

func Gins 

func Gins(as obj.As, f, t *Node) *obj.Prog

Gins inserts instruction as. f is from, t is to.

func Gvardef 

func Gvardef(n *Node)

func Gvarkill 

func Gvarkill(n *Node)

func Gvarlive 

func Gvarlive(n *Node)

func Import 

func Import(in *bufio.Reader)

Import populates importpkg from the serialized package data.

func Isconst 

func Isconst(n *Node, ct Ctype) bool

func KeepAlive 

func KeepAlive(v *ssa.Value)

KeepAlive marks the variable referenced by OpKeepAlive as live. Called during ssaGenValue.

func Linksym 

func Linksym(s *Sym) *obj.LSym

func Main 

func Main()

func Naddr 

func Naddr(a *obj.Addr, n *Node)

Naddr rewrites a to refer to n. It assumes that a is zeroed on entry.

func Nodconst 

func Nodconst(n *Node, t *Type, v int64)

func Patch 

func Patch(p *obj.Prog, to *obj.Prog)

func Prog 

func Prog(as obj.As) *obj.Prog

func Rnd 

func Rnd(o int64, r int64) int64

func SSAGenFPJump 

func SSAGenFPJump(s *SSAGenState, b, next *ssa.Block, jumps *[2][2]FloatingEQNEJump)

func Warn 

func Warn(fmt_ string, args ...interface{})

func Warnl 

func Warnl(line int32, fmt_ string, args ...interface{})

Types

type AlgKind 

type AlgKind int

AlgKind describes the kind of algorithms used for comparing and hashing a Type. 

const (
	// These values are known by runtime.
	ANOEQ AlgKind = iota
	AMEM0
	AMEM8
	AMEM16
	AMEM32
	AMEM64
	AMEM128
	ASTRING
	AINTER
	ANILINTER
	AFLOAT32
	AFLOAT64
	ACPLX64
	ACPLX128

	// Type can be compared/hashed as regular memory.
	AMEM AlgKind = 100

	// Type needs special comparison/hashing functions.
	ASPECIAL AlgKind = -1
)

type Arch 

type Arch struct {
	LinkArch *obj.LinkArch

	REGSP    int
	MAXWIDTH int64

	Defframe func(*obj.Prog)
	Proginfo func(*obj.Prog) ProgInfo
	Use387   bool // should 8g use 387 FP instructions instead of sse2.

	// SSAMarkMoves marks any MOVXconst ops that need to avoid clobbering flags.
	SSAMarkMoves func(*SSAGenState, *ssa.Block)

	// SSAGenValue emits Prog(s) for the Value.
	SSAGenValue func(*SSAGenState, *ssa.Value)

	// SSAGenBlock emits end-of-block Progs. SSAGenValue should be called
	// for all values in the block before SSAGenBlock.
	SSAGenBlock func(s *SSAGenState, b, next *ssa.Block)
}
var Thearch Arch

type ArrayType 

type ArrayType struct {
	Elem        *Type // element type
	Bound       int64 // number of elements; <0 if unknown yet
	Haspointers uint8 // 0 unknown, 1 no, 2 yes
}

ArrayType contains Type fields specific to array types.

type BasicBlock 

type BasicBlock struct {
	// contains filtered or unexported fields
}

An ordinary basic block.

Instructions are threaded together in a doubly-linked list. To iterate in program order follow the link pointer from the first node and stop after the last node has been visited 

for p = bb.first; ; p = p.link {
  ...
  if p == bb.last {
    break
  }
}

To iterate in reverse program order by following the opt pointer from the last node 

for p = bb.last; p != nil; p = p.opt {
  ...
}

type Branch 

type Branch struct {
	P *obj.Prog  // branch instruction
	B *ssa.Block // target
}

Branch is an unresolved branch.

type ChanArgsType 

type ChanArgsType struct {
	T *Type // reference to a chan type whose elements need a width check
}

ChanArgsType contains Type fields specific to TCHANARGS types.

type ChanDir 

type ChanDir uint8

ChanDir is whether a channel can send, receive, or both. 

const (
	// types of channel
	// must match ../../../../reflect/type.go:/ChanDir
	Crecv ChanDir = 1 << 0
	Csend ChanDir = 1 << 1
	Cboth ChanDir = Crecv | Csend
)

func (ChanDir) CanRecv 

func (c ChanDir) CanRecv() bool

func (ChanDir) CanSend 

func (c ChanDir) CanSend() bool

type ChanType 

type ChanType struct {
	Elem *Type   // element type
	Dir  ChanDir // channel direction
}

ChanType contains Type fields specific to channel types.

type Class 

type Class uint8

The Class of a variable/function describes the "storage class" of a variable or function. During parsing, storage classes are called declaration contexts. 

const (
	Pxxx      Class = iota
	PEXTERN         // global variable
	PAUTO           // local variables
	PAUTOHEAP       // local variable or parameter moved to heap
	PPARAM          // input arguments
	PPARAMOUT       // output results
	PFUNC           // global function

	PDISCARD // discard during parse of duplicate import
)

type Ctype 

type Ctype int8

Ctype describes the constant kind of an "ideal" (untyped) constant. 

const (
	CTxxx Ctype = iota

	CTINT
	CTRUNE
	CTFLT
	CTCPLX
	CTSTR
	CTBOOL
	CTNIL
)

type DDDFieldType 

type DDDFieldType struct {
	T *Type // reference to a slice type for ... args
}

DDDFieldType contains Type fields specific to TDDDFIELD types.

type Dlist 

type Dlist struct {
	// contains filtered or unexported fields
}

A Dlist stores a pointer to a TFIELD Type embedded within a TSTRUCT or TINTER Type.

type EType 

type EType uint8

EType describes a kind of type. 

var Tptr EType // either TPTR32 or TPTR64

func Simsimtype 

func Simsimtype(t *Type) EType

even simpler simtype; get rid of ptr, bool. assuming that the front end has rejected all the invalid conversions (like ptr -> bool)

func (EType) String 

func (et EType) String() string

type Error 

type Error struct {
	// contains filtered or unexported fields
}

type EscState 

type EscState struct {
	// contains filtered or unexported fields
}

type EscStep 

type EscStep struct {
	// contains filtered or unexported fields
}

An EscStep documents one step in the path from memory that is heap allocated to the (alleged) reason for the heap allocation.

type Field 

type Field struct {
	Nointerface bool
	Embedded    uint8 // embedded field
	Funarg      Funarg
	Broke       bool // broken field definition
	Isddd       bool // field is ... argument

	Sym   *Sym
	Nname *Node

	Type *Type // field type

	// Offset in bytes of this field or method within its enclosing struct
	// or interface Type.
	Offset int64

	Note string // literal string annotation
}

A Field represents a field in a struct or a method in an interface or associated with a named type.

func (*Field) Copy 

func (f *Field) Copy() *Field

func (*Field) End 

func (f *Field) End() int64

End returns the offset of the first byte immediately after this field.

type Fields 

type Fields struct {
	// contains filtered or unexported fields
}

Fields is a pointer to a slice of *Field. This saves space in Types that do not have fields or methods compared to a simple slice of *Field.

func (*Fields) Append 

func (f *Fields) Append(s ...*Field)

Append appends entries to f.

func (*Fields) Index 

func (f *Fields) Index(i int) *Field

Index returns the i'th element of Fields. It panics if f does not have at least i+1 elements.

func (*Fields) Iter 

func (fs *Fields) Iter() (*Field, Iter)

Iter returns the first field in fs and an Iter value to continue iterating across its successor fields. Deprecated: New code should use Slice instead.

func (*Fields) Len 

func (f *Fields) Len() int

Len returns the number of entries in f.

func (*Fields) Set 

func (f *Fields) Set(s []*Field)

Set sets f to a slice. This takes ownership of the slice.

func (*Fields) Slice 

func (f *Fields) Slice() []*Field

Slice returns the entries in f as a slice. Changes to the slice entries will be reflected in f.

type FloatingEQNEJump 

type FloatingEQNEJump struct {
	Jump  obj.As
	Index int
}

type FmtFlag 

type FmtFlag int

A FmtFlag value is a set of flags (or 0). They control how the Xconv functions format their values. See the respective function's documentation for details. 

const (
	FmtLeft     FmtFlag = 1 << iota // '-'
	FmtSharp                        // '#'
	FmtSign                         // '+'
	FmtUnsigned                     // ' '               (historic: u flag)
	FmtShort                        // verb == 'S'       (historic: h flag)
	FmtLong                         // verb == 'L'       (historic: l flag)
	FmtComma                        // '.' (== hasPrec)  (historic: , flag)
	FmtByte                         // '0'               (historic: hh flag)
)

type ForwardType 

type ForwardType struct {
	Copyto      []*Node // where to copy the eventual value to
	Embedlineno int32   // first use of this type as an embedded type
}

ForwardType contains Type fields specific to forward types.

type Funarg 

type Funarg uint8

Fnstruct records the kind of function argument 

const (
	FunargNone    Funarg = iota
	FunargRcvr           // receiver
	FunargParams         // input parameters
	FunargResults        // output results
)

type Func 

type Func struct {
	Shortname  *Node
	Enter      Nodes // for example, allocate and initialize memory for escaping parameters
	Exit       Nodes
	Cvars      Nodes   // closure params
	Dcl        []*Node // autodcl for this func/closure
	Inldcl     Nodes   // copy of dcl for use in inlining
	Closgen    int
	Outerfunc  *Node // outer function (for closure)
	FieldTrack map[*Sym]struct{}
	Ntype      *Node // signature
	Top        int   // top context (Ecall, Eproc, etc)
	Closure    *Node // OCLOSURE <-> ODCLFUNC
	FCurfn     *Node
	Nname      *Node

	Inl     Nodes // copy of the body for use in inlining
	InlCost int32
	Depth   int32

	Label int32 // largest auto-generated label in this function

	Endlineno int32
	WBLineno  int32 // line number of first write barrier

	Pragma        Pragma // go:xxx function annotations
	Dupok         bool   // duplicate definitions ok
	Wrapper       bool   // is method wrapper
	Needctxt      bool   // function uses context register (has closure variables)
	ReflectMethod bool   // function calls reflect.Type.Method or MethodByName
}

Func holds Node fields used only with function-like nodes.

type FuncArgsType 

type FuncArgsType struct {
	T *Type // reference to a func type whose elements need a width check
}

// FuncArgsType contains Type fields specific to TFUNCARGS types.

type FuncType 

type FuncType struct {
	Receiver *Type // function receiver
	Results  *Type // function results
	Params   *Type // function params

	Nname *Node

	// Argwid is the total width of the function receiver, params, and results.
	// It gets calculated via a temporary TFUNCARGS type.
	// Note that TFUNC's Width is Widthptr.
	Argwid int64

	Outnamed bool
}

FuncType contains Type fields specific to func types.

type GCProg 

type GCProg struct {
	// contains filtered or unexported fields
}

type InitEntry 

type InitEntry struct {
	Xoffset int64 // struct, array only
	Expr    *Node // bytes of run-time computed expressions
}

type InitPlan 

type InitPlan struct {
	E []InitEntry
}

type InterMethType 

type InterMethType struct {
	Nname *Node
}

InterMethType contains Type fields specific to interface method psuedo-types.

type InterType 

type InterType struct {
	// contains filtered or unexported fields
}

InterType contains Type fields specific to interface types.

type Iter 

type Iter struct {
	// contains filtered or unexported fields
}

Iter provides an abstraction for iterating across struct fields and interface methods.

func (*Iter) Next 

func (i *Iter) Next() *Field

Next returns the next field or method, if any.

type Label 

type Label struct {
	Def *Node
}

type Level 

type Level struct {
	// contains filtered or unexported fields
}

A Level encodes the reference state and context applied to (stack, heap) allocated memory.

value is the overall sum of *(1) and &(-1) operations encountered along a path from a destination (sink, return value) to a source (allocation, parameter).

suffixValue is the maximum-copy-started-suffix-level applied to a sink. For example: sink = x.left.left --> level=2, x is dereferenced twice and does not escape to sink. sink = &Node{x} --> level=-1, x is accessible from sink via one "address of" sink = &Node{&Node{x}} --> level=-2, x is accessible from sink via two "address of" sink = &Node{&Node{x.left}} --> level=-1, but x is NOT accessible from sink because it was indirected and then copied. (The copy operations are sometimes implicit in the source code; in this case, value of x.left was copied into a field of a newly allocated Node)

There's one of these for each Node, and the integer values rarely exceed even what can be stored in 4 bits, never mind 8.

type Liveness 

type Liveness struct {
	// contains filtered or unexported fields
}

A collection of global state used by liveness analysis.

type Magic 

type Magic struct {
	W   int // input for both - width
	S   int // output for both - shift
	Bad int // output for both - unexpected failure

	// magic multiplier for signed literal divisors
	Sd int64 // input - literal divisor
	Sm int64 // output - multiplier

	// magic multiplier for unsigned literal divisors
	Ud uint64 // input - literal divisor
	Um uint64 // output - multiplier
	Ua int    // output - adder
}

argument passing to/from smagic and umagic

type MapType 

type MapType struct {
	Key *Type // Key type
	Val *Type // Val (elem) type

	Bucket *Type // internal struct type representing a hash bucket
	Hmap   *Type // internal struct type representing the Hmap (map header object)
	Hiter  *Type // internal struct type representing hash iterator state
}

MapType contains Type fields specific to maps.

type Mpcplx 

type Mpcplx struct {
	Real Mpflt
	Imag Mpflt
}

Mpcplx represents a complex constant.

type Mpflt 

type Mpflt struct {
	Val big.Float
}

Mpflt represents a floating-point constant.

func (*Mpflt) Add 

func (a *Mpflt) Add(b *Mpflt)

func (*Mpflt) AddFloat64 

func (a *Mpflt) AddFloat64(c float64)

func (*Mpflt) Cmp 

func (a *Mpflt) Cmp(b *Mpflt) int

func (*Mpflt) CmpFloat64 

func (a *Mpflt) CmpFloat64(c float64) int

func (*Mpflt) Float32 

func (a *Mpflt) Float32() float64

func (*Mpflt) Float64 

func (a *Mpflt) Float64() float64

func (*Mpflt) Mul 

func (a *Mpflt) Mul(b *Mpflt)

func (*Mpflt) MulFloat64 

func (a *Mpflt) MulFloat64(c float64)

func (*Mpflt) Neg 

func (a *Mpflt) Neg()

func (*Mpflt) Quo 

func (a *Mpflt) Quo(b *Mpflt)

func (*Mpflt) Set 

func (a *Mpflt) Set(b *Mpflt)

func (*Mpflt) SetFloat64 

func (a *Mpflt) SetFloat64(c float64)

func (*Mpflt) SetInt 

func (a *Mpflt) SetInt(b *Mpint)

func (*Mpflt) SetString 

func (a *Mpflt) SetString(as string)

floating point input required syntax is [+-]d*[.]d*[e[+-]d*] or [+-]0xH*[e[+-]d*]

func (*Mpflt) String 

func (f *Mpflt) String() string

func (*Mpflt) Sub 

func (a *Mpflt) Sub(b *Mpflt)

type Mpint 

type Mpint struct {
	Val  big.Int
	Ovf  bool // set if Val overflowed compiler limit (sticky)
	Rune bool // set if syntax indicates default type rune
}

Mpint represents an integer constant.

func (*Mpint) Add 

func (a *Mpint) Add(b *Mpint)

func (*Mpint) And 

func (a *Mpint) And(b *Mpint)

func (*Mpint) AndNot 

func (a *Mpint) AndNot(b *Mpint)

func (*Mpint) Cmp 

func (a *Mpint) Cmp(b *Mpint) int

func (*Mpint) CmpInt64 

func (a *Mpint) CmpInt64(c int64) int

func (*Mpint) Int64 

func (a *Mpint) Int64() int64

func (*Mpint) Lsh 

func (a *Mpint) Lsh(b *Mpint)

func (*Mpint) Mul 

func (a *Mpint) Mul(b *Mpint)

func (*Mpint) Neg 

func (a *Mpint) Neg()

func (*Mpint) Or 

func (a *Mpint) Or(b *Mpint)

func (*Mpint) Quo 

func (a *Mpint) Quo(b *Mpint)

func (*Mpint) Rem 

func (a *Mpint) Rem(b *Mpint)

func (*Mpint) Rsh 

func (a *Mpint) Rsh(b *Mpint)

func (*Mpint) Set 

func (a *Mpint) Set(b *Mpint)

func (*Mpint) SetFloat 

func (a *Mpint) SetFloat(b *Mpflt) int

func (*Mpint) SetInt64 

func (a *Mpint) SetInt64(c int64)

func (*Mpint) SetOverflow 

func (a *Mpint) SetOverflow()

func (*Mpint) SetString 

func (a *Mpint) SetString(as string)

func (*Mpint) String 

func (x *Mpint) String() string

func (*Mpint) Sub 

func (a *Mpint) Sub(b *Mpint)

func (*Mpint) Xor 

func (a *Mpint) Xor(b *Mpint)

type Name 

type Name struct {
	Pack      *Node  // real package for import . names
	Pkg       *Pkg   // pkg for OPACK nodes
	Heapaddr  *Node  // temp holding heap address of param (could move to Param?)
	Inlvar    *Node  // ONAME substitute while inlining (could move to Param?)
	Defn      *Node  // initializing assignment
	Curfn     *Node  // function for local variables
	Param     *Param // additional fields for ONAME, ODCLFIELD
	Decldepth int32  // declaration loop depth, increased for every loop or label
	Vargen    int32  // unique name for ONAME within a function.  Function outputs are numbered starting at one.
	Iota      int32  // value if this name is iota
	Funcdepth int32
	Method    bool // OCALLMETH name
	Readonly  bool
	Captured  bool // is the variable captured by a closure
	Byval     bool // is the variable captured by value or by reference
	Needzero  bool // if it contains pointers, needs to be zeroed on function entry
	Keepalive bool // mark value live across unknown assembly call
}

Name holds Node fields used only by named nodes (ONAME, OPACK, OLABEL, ODCLFIELD, some OLITERAL).

type NilVal 

type NilVal struct{}

type Node 

type Node struct {
	// Tree structure.
	// Generic recursive walks should follow these fields.
	Left  *Node
	Right *Node
	Ninit Nodes
	Nbody Nodes
	List  Nodes
	Rlist Nodes

	// most nodes
	Type *Type
	Orig *Node // original form, for printing, and tracking copies of ONAMEs

	// func
	Func *Func

	// ONAME
	Name *Name

	Sym *Sym        // various
	E   interface{} // Opt or Val, see methods below

	// Various. Usually an offset into a struct. For example, ONAME nodes
	// that refer to local variables use it to identify their stack frame
	// position. ODOT, ODOTPTR, and OINDREG use it to indicate offset
	// relative to their base address. ONAME nodes on the left side of an
	// OKEY within an OSTRUCTLIT use it to store the named field's offset.
	// OXCASE and OXFALL use it to validate the use of fallthrough.
	// Possibly still more uses. If you find any, document them.
	Xoffset int64

	Lineno int32

	// OREGISTER, OINDREG
	Reg int16

	Esc uint16 // EscXXX

	Op        Op
	Ullman    uint8 // sethi/ullman number
	Addable   bool  // addressable
	Etype     EType // op for OASOP, etype for OTYPE, exclam for export, 6g saved reg, ChanDir for OTCHAN
	Bounded   bool  // bounds check unnecessary
	NonNil    bool  // guaranteed to be non-nil
	Class     Class // PPARAM, PAUTO, PEXTERN, etc
	Embedded  uint8 // ODCLFIELD embedded type
	Colas     bool  // OAS resulting from :=
	Diag      uint8 // already printed error about this
	Noescape  bool  // func arguments do not escape; TODO(rsc): move Noescape to Func struct (see CL 7360)
	Walkdef   uint8 // tracks state during typecheckdef; 2 == loop detected
	Typecheck uint8 // tracks state during typechecking; 2 == loop detected
	Local     bool
	IsStatic  bool // whether this Node will be converted to purely static data
	Initorder uint8
	Used      bool // for variable/label declared and not used error
	Isddd     bool // is the argument variadic
	Implicit  bool
	Addrtaken bool // address taken, even if not moved to heap
	Assigned  bool // is the variable ever assigned to
	Likely    int8 // likeliness of if statement
	// contains filtered or unexported fields
}

A Node is a single node in the syntax tree. Actually the syntax tree is a syntax DAG, because there is only one node with Op=ONAME for a given instance of a variable x. The same is true for Op=OTYPE and Op=OLITERAL. 

var Curfn *Node
var Deferproc *Node
var Deferreturn *Node
var Newproc *Node

func AutoVar 

func AutoVar(v *ssa.Value) (*Node, int64)

AutoVar returns a *Node and int64 representing the auto variable and offset within it where v should be spilled.

func Sysfunc 

func Sysfunc(name string) *Node

func (*Node) Bool 

func (n *Node) Bool() bool

Bool returns n as an bool. n must be an boolean constant.

func (*Node) Convconst 

func (n *Node) Convconst(con *Node, t *Type)

Convconst converts constant node n to type t and places the result in con.

func (*Node) Format 

func (n *Node) Format(s fmt.State, verb rune)

func (*Node) HasBreak 

func (n *Node) HasBreak() bool

func (*Node) Int64 

func (n *Node) Int64() int64

Int64 returns n as an int64. n must be an integer or rune constant.

func (*Node) IntLiteral 

func (n *Node) IntLiteral() (x int64, ok bool)

IntLiteral returns the Node's literal value as an integer.

func (*Node) IsMethod 

func (n *Node) IsMethod() bool

IsMethod reports whether n is a method. n must be a function or a method.

func (*Node) IsOutputParamHeapAddr 

func (n *Node) IsOutputParamHeapAddr() bool

func (*Node) Line 

func (n *Node) Line() string

func (*Node) Nconv 

func (n *Node) Nconv(s fmt.State, flag FmtFlag)

"%L" suffix with "(type %T)" where possible "%+S" in debug mode, don't recurse, no multiline output

func (*Node) Opt 

func (n *Node) Opt() interface{}

Opt returns the optimizer data for the node.

func (*Node) SetBigInt 

func (n *Node) SetBigInt(x *big.Int)

SetBigInt sets n's value to x. n must be an integer constant.

func (*Node) SetHasBreak 

func (n *Node) SetHasBreak(b bool)

func (*Node) SetInt 

func (n *Node) SetInt(i int64)

SetInt sets n's value to i. n must be an integer constant.

func (*Node) SetOpt 

func (n *Node) SetOpt(x interface{})

SetOpt sets the optimizer data for the node, which must not have been used with SetVal. SetOpt(nil) is ignored for Vals to simplify call sites that are clearing Opts.

func (*Node) SetSliceBounds 

func (n *Node) SetSliceBounds(low, high, max *Node)

SetSliceBounds sets n's slice bounds, where n is a slice expression. n must be a slice expression. If max is non-nil, n must be a full slice expression.

func (*Node) SetVal 

func (n *Node) SetVal(v Val)

SetVal sets the Val for the node, which must not have been used with SetOpt.

func (*Node) SliceBounds 

func (n *Node) SliceBounds() (low, high, max *Node)

SliceBounds returns n's slice bounds: low, high, and max in expr[low:high:max]. n must be a slice expression. max is nil if n is a simple slice expression.

func (*Node) String 

func (n *Node) String() string

func (*Node) Typ 

func (n *Node) Typ() ssa.Type

func (*Node) Val 

func (n *Node) Val() Val

Val returns the Val for the node.

type NodeEscState 

type NodeEscState struct {
	Curfn             *Node
	Escflowsrc        []EscStep // flow(this, src)
	Escretval         Nodes     // on OCALLxxx, list of dummy return values
	Escloopdepth      int32     // -1: global, 0: return variables, 1:function top level, increased inside function for every loop or label to mark scopes
	Esclevel          Level
	Walkgen           uint32
	Maxextraloopdepth int32
}

type Nodes 

type Nodes struct {
	// contains filtered or unexported fields
}

Nodes is a pointer to a slice of *Node. For fields that are not used in most nodes, this is used instead of a slice to save space.

func (Nodes) Addr 

func (n Nodes) Addr(i int) **Node

Addr returns the address of the i'th element of Nodes. It panics if n does not have at least i+1 elements.

func (*Nodes) Append 

func (n *Nodes) Append(a ...*Node)

Append appends entries to Nodes. If a slice is passed in, this will take ownership of it.

func (*Nodes) AppendNodes 

func (n *Nodes) AppendNodes(n2 *Nodes)

AppendNodes appends the contents of *n2 to n, then clears n2.

func (Nodes) First 

func (n Nodes) First() *Node

First returns the first element of Nodes (same as n.Index(0)). It panics if n has no elements.

func (Nodes) Format 

func (l Nodes) Format(s fmt.State, verb rune)

func (Nodes) Index 

func (n Nodes) Index(i int) *Node

Index returns the i'th element of Nodes. It panics if n does not have at least i+1 elements.

func (Nodes) Len 

func (n Nodes) Len() int

Len returns the number of entries in Nodes.

func (*Nodes) MoveNodes 

func (n *Nodes) MoveNodes(n2 *Nodes)

MoveNodes sets n to the contents of n2, then clears n2.

func (*Nodes) Prepend 

func (n *Nodes) Prepend(a ...*Node)

Prepend prepends entries to Nodes. If a slice is passed in, this will take ownership of it.

func (Nodes) Second 

func (n Nodes) Second() *Node

Second returns the second element of Nodes (same as n.Index(1)). It panics if n has fewer than two elements.

func (*Nodes) Set 

func (n *Nodes) Set(s []*Node)

Set sets n to a slice. This takes ownership of the slice.

func (*Nodes) Set1 

func (n *Nodes) Set1(node *Node)

Set1 sets n to a slice containing a single node.

func (*Nodes) Set2 

func (n *Nodes) Set2(n1, n2 *Node)

Set2 sets n to a slice containing two nodes.

func (Nodes) SetIndex 

func (n Nodes) SetIndex(i int, node *Node)

SetIndex sets the i'th element of Nodes to node. It panics if n does not have at least i+1 elements.

func (Nodes) Slice 

func (n Nodes) Slice() []*Node

Slice returns the entries in Nodes as a slice. Changes to the slice entries (as in s[i] = n) will be reflected in the Nodes.

func (Nodes) String 

func (n Nodes) String() string

type Op 

type Op uint8

func (Op) Format 

func (o Op) Format(s fmt.State, verb rune)

func (Op) GoString 

func (o Op) GoString() string

func (Op) IsSlice3 

func (o Op) IsSlice3() bool

IsSlice3 reports whether o is a slice3 op (OSLICE3, OSLICE3ARR). o must be a slicing op.

func (Op) String 

func (o Op) String() string

type OpPrec 

type OpPrec int
const (
	// Precedences of binary operators (must be > 0).
	PCOMM OpPrec = 1 + iota
	POROR
	PANDAND
	PCMP
	PADD
	PMUL
)

type Order 

type Order struct {
	// contains filtered or unexported fields
}

Order holds state during the ordering process.

type Param 

type Param struct {
	Ntype *Node

	// ONAME PAUTOHEAP
	Stackcopy *Node // the PPARAM/PPARAMOUT on-stack slot (moved func params only)

	// ONAME PPARAM
	Field *Field // TFIELD in arg struct

	// ONAME closure linkage
	// Consider:
	//
	//	func f() {
	//		x := 1 // x1
	//		func() {
	//			use(x) // x2
	//			func() {
	//				use(x) // x3
	//				--- parser is here ---
	//			}()
	//		}()
	//	}
	//
	// There is an original declaration of x and then a chain of mentions of x
	// leading into the current function. Each time x is mentioned in a new closure,
	// we create a variable representing x for use in that specific closure,
	// since the way you get to x is different in each closure.
	//
	// Let's number the specific variables as shown in the code:
	// x1 is the original x, x2 is when mentioned in the closure,
	// and x3 is when mentioned in the closure in the closure.
	//
	// We keep these linked (assume N > 1):
	//
	//   - x1.Defn = original declaration statement for x (like most variables)
	//   - x1.Innermost = current innermost closure x (in this case x3), or nil for none
	//   - x1.isClosureVar() = false
	//
	//   - xN.Defn = x1, N > 1
	//   - xN.isClosureVar() = true, N > 1
	//   - x2.Outer = nil
	//   - xN.Outer = x(N-1), N > 2
	//
	//
	// When we look up x in the symbol table, we always get x1.
	// Then we can use x1.Innermost (if not nil) to get the x
	// for the innermost known closure function,
	// but the first reference in a closure will find either no x1.Innermost
	// or an x1.Innermost with .Funcdepth < Funcdepth.
	// In that case, a new xN must be created, linked in with:
	//
	//     xN.Defn = x1
	//     xN.Outer = x1.Innermost
	//     x1.Innermost = xN
	//
	// When we finish the function, we'll process its closure variables
	// and find xN and pop it off the list using:
	//
	//     x1 := xN.Defn
	//     x1.Innermost = xN.Outer
	//
	// We leave xN.Innermost set so that we can still get to the original
	// variable quickly. Not shown here, but once we're
	// done parsing a function and no longer need xN.Outer for the
	// lexical x reference links as described above, closurebody
	// recomputes xN.Outer as the semantic x reference link tree,
	// even filling in x in intermediate closures that might not
	// have mentioned it along the way to inner closures that did.
	// See closurebody for details.
	//
	// During the eventual compilation, then, for closure variables we have:
	//
	//     xN.Defn = original variable
	//     xN.Outer = variable captured in next outward scope
	//                to make closure where xN appears
	//
	// Because of the sharding of pieces of the node, x.Defn means x.Name.Defn
	// and x.Innermost/Outer means x.Name.Param.Innermost/Outer.
	Innermost *Node
	Outer     *Node
}

type Pkg 

type Pkg struct {
	Name     string // package name, e.g. "sys"
	Path     string // string literal used in import statement, e.g. "runtime/internal/sys"
	Pathsym  *obj.LSym
	Prefix   string // escaped path for use in symbol table
	Imported bool   // export data of this package was parsed
	Direct   bool   // imported directly
	Syms     map[string]*Sym
}
var Runtimepkg *Pkg // package runtime

func (*Pkg) Lookup 

func (pkg *Pkg) Lookup(name string) *Sym

func (*Pkg) LookupBytes 

func (pkg *Pkg) LookupBytes(name []byte) *Sym

type Pragma 

type Pragma syntax.Pragma
const (
	Nointerface       Pragma = 1 << iota
	Noescape                 // func parameters don't escape
	Norace                   // func must not have race detector annotations
	Nosplit                  // func should not execute on separate stack
	Noinline                 // func should not be inlined
	Systemstack              // func must run on system stack
	Nowritebarrier           // emit compiler error instead of write barrier
	Nowritebarrierrec        // error on write barrier in this or recursive callees
	CgoUnsafeArgs            // treat a pointer to one arg as a pointer to them all
	UintptrEscapes           // pointers converted to uintptr escape
)

type ProgInfo 

type ProgInfo struct {
	Flags uint32 // flag bits
	// contains filtered or unexported fields
}

ProgInfo holds information about the instruction for use by clients such as the compiler. The exact meaning of this data is up to the client and is not interpreted by the cmd/internal/obj/... packages.

type PtrType 

type PtrType struct {
	Elem *Type // element type
}

PtrType contains Type fields specific to pointer types.

type SSAGenState 

type SSAGenState struct {
	// Branches remembers all the branch instructions we've seen
	// and where they would like to go.
	Branches []Branch

	// 387 port: maps from SSE registers (REG_X?) to 387 registers (REG_F?)
	SSEto387 map[int16]int16
	// Some architectures require a 64-bit temporary for FP-related register shuffling. Examples include x86-387, PPC, and Sparc V8.
	ScratchFpMem *Node
	// contains filtered or unexported fields
}

SSAGenState contains state needed during Prog generation.

func (*SSAGenState) Pc 

func (s *SSAGenState) Pc() *obj.Prog

Pc returns the current Prog.

func (*SSAGenState) SetLineno 

func (s *SSAGenState) SetLineno(l int32)

SetLineno sets the current source line number.

type Sig 

type Sig struct {
	// contains filtered or unexported fields
}

type SliceType 

type SliceType struct {
	Elem *Type // element type
}

SliceType contains Type fields specific to slice types.

type StructType 

type StructType struct {

	// Maps have three associated internal structs (see struct MapType).
	// Map links such structs back to their map type.
	Map *Type

	Funarg      Funarg // type of function arguments for arg struct
	Haspointers uint8  // 0 unknown, 1 no, 2 yes
	// contains filtered or unexported fields
}

StructType contains Type fields specific to struct types.

type Sym 

type Sym struct {
	Flags     SymFlags
	Link      *Sym
	Importdef *Pkg   // where imported definition was found
	Linkname  string // link name

	// saved and restored by dcopy
	Pkg        *Pkg
	Name       string // variable name
	Def        *Node  // definition: ONAME OTYPE OPACK or OLITERAL
	Block      int32  // blocknumber to catch redeclaration
	Lastlineno int32  // last declaration for diagnostic

	Label   *Label // corresponding label (ephemeral)
	Origpkg *Pkg   // original package for . import
	Lsym    *obj.LSym
	Fsym    *Sym // funcsym
}

Sym represents an object name. Most commonly, this is a Go identifier naming an object declared within a package, but Syms are also used to name internal synthesized objects.

As a special exception, field and method names that are exported use the Sym associated with localpkg instead of the package that declared them. This allows using Sym pointer equality to test for Go identifier uniqueness when handling selector expressions.

func Pkglookup 

func Pkglookup(name string, pkg *Pkg) *Sym

func (*Sym) Format 

func (s *Sym) Format(f fmt.State, verb rune)

"%S" suppresses qualifying with package

func (*Sym) String 

func (s *Sym) String() string

type SymFlags 

type SymFlags uint8
const (
	SymExport SymFlags = 1 << iota // to be exported
	SymPackage
	SymExported // already written out by export
	SymUniq
	SymSiggen
	SymAsm
	SymAlgGen
)
type Symlink struct {
	// contains filtered or unexported fields
}

code to help generate trampoline functions for methods on embedded subtypes. these are approx the same as the corresponding adddot routines except that they expect to be called with unique tasks and they return the actual methods.

type Timings 

type Timings struct {
	// contains filtered or unexported fields
}

Timings collects the execution times of labeled phases which are added trough a sequence of Start/Stop calls. Events may be associated with each phase via AddEvent.

func (*Timings) AddEvent 

func (t *Timings) AddEvent(size int64, unit string)

AddEvent associates an event, i.e., a count, or an amount of data, with the most recently started or stopped phase; or the very first phase if Start or Stop hasn't been called yet. The unit specifies the unit of measurement (e.g., MB, lines, no. of funcs, etc.).

func (*Timings) Start 

func (t *Timings) Start(labels ...string)

Start marks the beginning of a new phase and implicitly stops the previous phase. The phase name is the colon-separated concatenation of the labels.

func (*Timings) Stop 

func (t *Timings) Stop(labels ...string)

Stop marks the end of a phase and implicitly starts a new phase. The labels are added to the labels of the ended phase.

func (*Timings) Write 

func (t *Timings) Write(w io.Writer, prefix string)

Write prints the phase times to w. The prefix is printed at the start of each line.

type Type 

type Type struct {
	// Extra contains extra etype-specific fields.
	// As an optimization, those etype-specific structs which contain exactly
	// one pointer-shaped field are stored as values rather than pointers when possible.
	//
	// TMAP: *MapType
	// TFORW: *ForwardType
	// TFUNC: *FuncType
	// TINTERMETHOD: InterMethType
	// TSTRUCT: *StructType
	// TINTER: *InterType
	// TDDDFIELD: DDDFieldType
	// TFUNCARGS: FuncArgsType
	// TCHANARGS: ChanArgsType
	// TCHAN: *ChanType
	// TPTR32, TPTR64: PtrType
	// TARRAY: *ArrayType
	// TSLICE: SliceType
	Extra interface{}

	// Width is the width of this Type in bytes.
	Width int64

	Orig *Type // original type (type literal or predefined type)

	Sym    *Sym  // symbol containing name, for named types
	Vargen int32 // unique name for OTYPE/ONAME
	Lineno int32 // line at which this type was declared, implicitly or explicitly

	Etype      EType // kind of type
	Noalg      bool  // suppress hash and eq algorithm generation
	Trecur     uint8 // to detect loops
	Local      bool  // created in this file
	Deferwidth bool
	Broke      bool  // broken type definition.
	Align      uint8 // the required alignment of this type, in bytes
	// contains filtered or unexported fields
}

A Type represents a Go type.

func (*Type) Alignment 

func (t *Type) Alignment() int64

func (*Type) AllMethods 

func (t *Type) AllMethods() *Fields

func (*Type) ArgWidth 

func (t *Type) ArgWidth() int64

ArgWidth returns the total aligned argument size for a function. It includes the receiver, parameters, and results.

func (*Type) ChanArgs 

func (t *Type) ChanArgs() *Type

ChanArgs returns the channel type for TCHANARGS type t.

func (*Type) ChanDir 

func (t *Type) ChanDir() ChanDir

ChanDir returns the direction of a channel type t. The direction will be one of Crecv, Csend, or Cboth.

func (*Type) ChanType 

func (t *Type) ChanType() *ChanType

ChanType returns t's extra channel-specific fields.

func (*Type) Compare 

func (t *Type) Compare(u ssa.Type) ssa.Cmp

Compare compares types for purposes of the SSA back end, returning an ssa.Cmp (one of CMPlt, CMPeq, CMPgt). The answers are correct for an optimizer or code generator, but not necessarily typechecking. The order chosen is arbitrary, only consistency and division into equivalence classes (Types that compare CMPeq) matters.

func (*Type) Copy 

func (t *Type) Copy() *Type

Copy returns a shallow copy of the Type.

func (*Type) DDDField 

func (t *Type) DDDField() *Type

DDDField returns the slice ... type for TDDDFIELD type t.

func (*Type) Elem 

func (t *Type) Elem() *Type

Elem returns the type of elements of t. Usable with pointers, channels, arrays, and slices.

func (*Type) ElemType 

func (t *Type) ElemType() ssa.Type

func (*Type) Field 

func (t *Type) Field(i int) *Field

Field returns the i'th field/method of struct/interface type t.

func (*Type) FieldName 

func (t *Type) FieldName(i int) string

func (*Type) FieldOff 

func (t *Type) FieldOff(i int) int64

func (*Type) FieldSlice 

func (t *Type) FieldSlice() []*Field

FieldSlice returns a slice of containing all fields/methods of struct/interface type t.

func (*Type) FieldType 

func (t *Type) FieldType(i int) ssa.Type

func (*Type) Fields 

func (t *Type) Fields() *Fields

func (*Type) Format 

func (t *Type) Format(s fmt.State, verb rune)

"%L" print definition, not name "%S" omit 'func' and receiver from function types, short type names "% v" package name, not prefix (FTypeId mode, sticky)

func (*Type) ForwardType 

func (t *Type) ForwardType() *ForwardType

ForwardType returns t's extra forward-type-specific fields.

func (*Type) FuncArgs 

func (t *Type) FuncArgs() *Type

FuncArgs returns the channel type for TFUNCARGS type t.

func (*Type) FuncType 

func (t *Type) FuncType() *FuncType

FuncType returns t's extra func-specific fields.

func (*Type) IncomparableField 

func (t *Type) IncomparableField() *Field

IncomparableField returns an incomparable Field of struct Type t, if any.

func (*Type) IsArray 

func (t *Type) IsArray() bool

func (*Type) IsBoolean 

func (t *Type) IsBoolean() bool

func (*Type) IsChan 

func (t *Type) IsChan() bool

func (*Type) IsComparable 

func (t *Type) IsComparable() bool

IsComparable reports whether t is a comparable type.

func (*Type) IsComplex 

func (t *Type) IsComplex() bool

func (*Type) IsEmptyInterface 

func (t *Type) IsEmptyInterface() bool

IsEmptyInterface reports whether t is an empty interface type.

func (*Type) IsFlags 

func (t *Type) IsFlags() bool

func (*Type) IsFloat 

func (t *Type) IsFloat() bool

func (*Type) IsFuncArgStruct 

func (t *Type) IsFuncArgStruct() bool

IsFuncArgStruct reports whether t is a struct representing function parameters.

func (*Type) IsInteger 

func (t *Type) IsInteger() bool

func (*Type) IsInterface 

func (t *Type) IsInterface() bool

func (*Type) IsKind 

func (t *Type) IsKind(et EType) bool

IsKind reports whether t is a Type of the specified kind.

func (*Type) IsMap 

func (t *Type) IsMap() bool

func (*Type) IsMemory 

func (t *Type) IsMemory() bool

func (*Type) IsPtr 

func (t *Type) IsPtr() bool

IsPtr reports whether t is a regular Go pointer type. This does not include unsafe.Pointer.

func (*Type) IsPtrShaped 

func (t *Type) IsPtrShaped() bool

IsPtrShaped reports whether t is represented by a single machine pointer. In addition to regular Go pointer types, this includes map, channel, and function types and unsafe.Pointer. It does not include array or struct types that consist of a single pointer shaped type. TODO(mdempsky): Should it? See golang.org/issue/15028.

func (*Type) IsRegularMemory 

func (t *Type) IsRegularMemory() bool

IsRegularMemory reports whether t can be compared/hashed as regular memory.

func (*Type) IsSigned 

func (t *Type) IsSigned() bool

func (*Type) IsSlice 

func (t *Type) IsSlice() bool

func (*Type) IsString 

func (t *Type) IsString() bool

func (*Type) IsStruct 

func (t *Type) IsStruct() bool

func (*Type) IsTuple 

func (t *Type) IsTuple() bool

func (*Type) IsUnsafePtr 

func (t *Type) IsUnsafePtr() bool

IsUnsafePtr reports whether t is an unsafe pointer.

func (*Type) IsUntyped 

func (t *Type) IsUntyped() bool

IsUntyped reports whether t is an untyped type.

func (*Type) IsVoid 

func (t *Type) IsVoid() bool

func (*Type) Key 

func (t *Type) Key() *Type

Key returns the key type of map type t.

func (*Type) MapType 

func (t *Type) MapType() *MapType

MapType returns t's extra map-specific fields.

func (*Type) Methods 

func (t *Type) Methods() *Fields

func (*Type) Nname 

func (t *Type) Nname() *Node

Nname returns the associated function's nname.

func (*Type) NumElem 

func (t *Type) NumElem() int64

func (*Type) NumFields 

func (t *Type) NumFields() int

func (*Type) Params 

func (t *Type) Params() *Type

func (*Type) PtrTo 

func (t *Type) PtrTo() ssa.Type

func (*Type) Recv 

func (t *Type) Recv() *Field

Recv returns the receiver of function type t, if any.

func (*Type) Recvs 

func (t *Type) Recvs() *Type

func (*Type) Results 

func (t *Type) Results() *Type

func (*Type) SetFields 

func (t *Type) SetFields(fields []*Field)

SetFields sets struct/interface type t's fields/methods to fields.

func (*Type) SetNname 

func (t *Type) SetNname(n *Node)

Nname sets the associated function's nname.

func (*Type) SetNumElem 

func (t *Type) SetNumElem(n int64)

SetNumElem sets the number of elements in an array type. The only allowed use is on array types created with typDDDArray. For other uses, create a new array with typArray instead.

func (*Type) SimpleString 

func (t *Type) SimpleString() string

func (*Type) Size 

func (t *Type) Size() int64

func (*Type) String 

func (t *Type) String() string

func (*Type) StructType 

func (t *Type) StructType() *StructType

StructType returns t's extra struct-specific fields.

func (*Type) Val 

func (t *Type) Val() *Type

Val returns the value type of map type t.

type Val 

type Val struct {
	// U contains one of:
	// bool     bool when n.ValCtype() == CTBOOL
	// *Mpint   int when n.ValCtype() == CTINT, rune when n.ValCtype() == CTRUNE
	// *Mpflt   float when n.ValCtype() == CTFLT
	// *Mpcplx  pair of floats when n.ValCtype() == CTCPLX
	// string   string when n.ValCtype() == CTSTR
	// *Nilval  when n.ValCtype() == CTNIL
	U interface{}
}

func (Val) Ctype 

func (v Val) Ctype() Ctype

func (Val) Format 

func (v Val) Format(s fmt.State, verb rune)

func (Val) Interface 

func (v Val) Interface() interface{}

Interface returns the constant value stored in v as an interface{}. It returns int64s for ints and runes, float64s for floats, complex128s for complex values, and nil for constant nils.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.