Directories ¶
Path | Synopsis |
---|---|
Package ads1x15 controls ADS1015/ADS1115 Analog-Digital Converters (ADC) via I²C interface.
|
Package ads1x15 controls ADS1015/ADS1115 Analog-Digital Converters (ADC) via I²C interface. |
Package as7262 controls an AMS 6 channel visible spectral sensor via an i2c interface.
|
Package as7262 controls an AMS 6 channel visible spectral sensor via an i2c interface. |
Package bh1750 controls a ROHM BH1750 ambient light sensor, over an i2c bus.
|
Package bh1750 controls a ROHM BH1750 ambient light sensor, over an i2c bus. |
Package bitbang implements conn by banging on the bits (GPIO pins).
|
Package bitbang implements conn by banging on the bits (GPIO pins). |
Package epd controls Waveshare e-paper series displays.
|
Package epd controls Waveshare e-paper series displays. |
Package hd44780 controls the Hitachi LCD display chipset HD-44780 Datasheet https://www.sparkfun.com/datasheets/LCD/HD44780.pdf
|
Package hd44780 controls the Hitachi LCD display chipset HD-44780 Datasheet https://www.sparkfun.com/datasheets/LCD/HD44780.pdf |
Package ht16k33 implements interfacing code to Holtek HT16K33 Alphanumeric 16x8 LED driver.
|
Package ht16k33 implements interfacing code to Holtek HT16K33 Alphanumeric 16x8 LED driver. |
Package hx711 implements an interface to the 24-bits HX711 analog to digital converter.
|
Package hx711 implements an interface to the 24-bits HX711 analog to digital converter. |
Package ina219 controls a Texas Instruments ina219 high side current, voltage and power monitor IC over an i2c bus.
|
Package ina219 controls a Texas Instruments ina219 high side current, voltage and power monitor IC over an i2c bus. |
Package mcp9808 controls a Microchip MCP9808 digital I²C temperature sensor.
|
Package mcp9808 controls a Microchip MCP9808 digital I²C temperature sensor. |
Package mfrc522 controls a Mifare RFID card reader.
|
Package mfrc522 controls a Mifare RFID card reader. |
commands
Package commands contains the command that a MFRC522 supports.
|
Package commands contains the command that a MFRC522 supports. |
Package mpu9250 MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) Datasheet https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf https://www.invensense.com/wp-content/uploads/2015/02/MPU-9250-Register-Map.pdf
|
Package mpu9250 MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) Datasheet https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf https://www.invensense.com/wp-content/uploads/2015/02/MPU-9250-Register-Map.pdf |
Package nrzled is a driver for LEDs ws2811/ws2812/ws2812b and compatible devices like sk6812 and ucs1903 that uses a single wire NRZ encoded communication protocol.
|
Package nrzled is a driver for LEDs ws2811/ws2812/ws2812b and compatible devices like sk6812 and ucs1903 that uses a single wire NRZ encoded communication protocol. |
Package pca9548 is a driver for an 8 port I²C multiplexer that is available from multiple vendors.
|
Package pca9548 is a driver for an 8 port I²C multiplexer that is available from multiple vendors. |
Package pca9685 includes utilities to controls pca9685 module and servo motors.
|
Package pca9685 includes utilities to controls pca9685 module and servo motors. |
Package piblaster implements interfacing code is piblaster.
|
Package piblaster implements interfacing code is piblaster. |
Package rainbowhat implements interfacing code to Pimoroni's Rainbow hat.
|
Package rainbowhat implements interfacing code to Pimoroni's Rainbow hat. |
Package sn3218 controls a SN3218 LED driver with 18 LEDs over an i2c bus.
|
Package sn3218 controls a SN3218 LED driver with 18 LEDs over an i2c bus. |
Package unicornhd implements interfacing code to Pimoroni's Unicorn HD hat.
|
Package unicornhd implements interfacing code to Pimoroni's Unicorn HD hat. |
Click to show internal directories.
Click to hide internal directories.