commands

Documentation

Overview

Package commands contains the command that a MFRC522 supports.

Index

• Constants
• type AuthStatus
• type LowLevel
  • func NewLowLevelSPI(spiPort spi.Port, resetPin gpio.PinOut, irqPin gpio.PinIn) (*LowLevel, error)
  • func (r *LowLevel) Auth(mode byte, blockAddress byte, sectorKey [6]byte, serial []byte) (AuthStatus, error)
  • func (r *LowLevel) CRC(inData []byte) ([]byte, error)
  • func (r *LowLevel) CardWrite(command byte, data []byte) ([]byte, int, error)
  • func (r *LowLevel) ClearBitmask(address, mask int) error
  • func (r *LowLevel) DevRead(address int) (byte, error)
  • func (r *LowLevel) DevWrite(address int, data byte) error
  • func (r *LowLevel) SetBitmask(address, mask int) error
  • func (r *LowLevel) StopCrypto() error
  • func (r *LowLevel) String() string
  • func (r *LowLevel) WaitForEdge(timeout time.Duration) bool

Constants

const (
	PCD_IDLE       = 0x00
	PCD_AUTHENT    = 0x0E
	PCD_RECEIVE    = 0x08
	PCD_TRANSMIT   = 0x04
	PCD_TRANSCEIVE = 0x0C
	PCD_RESETPHASE = 0x0F
	PCD_CALCCRC    = 0x03

	PICC_REQIDL    = 0x26
	PICC_REQALL    = 0x52
	PICC_ANTICOLL  = 0x93
	PICC_SElECTTAG = 0x93
	PICC_AUTHENT1A = 0x60
	PICC_AUTHENT1B = 0x61
	PICC_READ      = 0x30
	PICC_WRITE     = 0xA0
	PICC_DECREMENT = 0xC0
	PICC_INCREMENT = 0xC1
	PICC_RESTORE   = 0xC2
	PICC_TRANSFER  = 0xB0
	PICC_HALT      = 0x50
)

Operation constants

const (
	CommandReg    = 0x01
	CommIEnReg    = 0x02
	DivlEnReg     = 0x03
	CommIrqReg    = 0x04
	DivIrqReg     = 0x05
	ErrorReg      = 0x06
	Status1Reg    = 0x07
	Status2Reg    = 0x08
	FIFODataReg   = 0x09
	FIFOLevelReg  = 0x0A
	WaterLevelReg = 0x0B
	ControlReg    = 0x0C
	BitFramingReg = 0x0D
	CollReg       = 0x0E

	ModeReg        = 0x11
	TxModeReg      = 0x12
	RxModeReg      = 0x13
	TxControlReg   = 0x14
	TxAutoReg      = 0x15
	TxSelReg       = 0x16
	RxSelReg       = 0x17
	RxThresholdReg = 0x18
	DemodReg       = 0x19
	MifareReg      = 0x1C
	SerialSpeedReg = 0x1F

	CRCResultRegM     = 0x21
	CRCResultRegL     = 0x22
	ModWidthReg       = 0x24
	RFCfgReg          = 0x26
	GsNReg            = 0x27
	CWGsPReg          = 0x28
	ModGsPReg         = 0x29
	TModeReg          = 0x2A
	TPrescalerReg     = 0x2B
	TReloadRegH       = 0x2C
	TReloadRegL       = 0x2D
	TCounterValueRegH = 0x2E
	TCounterValueRegL = 0x2F

	TestSel1Reg     = 0x31
	TestSel2Reg     = 0x32
	TestPinEnReg    = 0x33
	TestPinValueReg = 0x34
	TestBusReg      = 0x35
	AutoTestReg     = 0x36
	VersionReg      = 0x37
	AnalogTestReg   = 0x38
	TestDAC1Reg     = 0x39
	TestDAC2Reg     = 0x3A
	TestADCReg      = 0x3B
)

Register constants

Types

type AuthStatus

type AuthStatus byte

AuthStatus indicates the authentication response, could be one of AuthOk, AuthReadFailure or AuthFailure

const (
	AuthOk AuthStatus = iota
	AuthReadFailure
	AuthFailure
)

Card authentication status enum.

type LowLevel

type LowLevel struct {
	// contains filtered or unexported fields
}

LowLevel is a low-level handler of a MFRC522 RFID reader.

func NewLowLevelSPI

func NewLowLevelSPI(spiPort spi.Port, resetPin gpio.PinOut, irqPin gpio.PinIn) (*LowLevel, error)

NewLowLevelSPI creates and initializes the RFID card reader attached to SPI.

spiPort - the SPI device to use.
resetPin - reset GPIO pin.
irqPin - irq GPIO pin.

func (*LowLevel) Auth

func (r *LowLevel) Auth(mode byte, blockAddress byte, sectorKey [6]byte, serial []byte) (AuthStatus, error)

Auth authenticate the card fof the sector/block using the provided data.

mode - the authentication mode.
sector - the sector to authenticate on.
block - the block within sector to authenticate.
sectorKey - the key to be used for accessing the sector data.
serial - the serial of the card.

func (*LowLevel) CRC

func (r *LowLevel) CRC(inData []byte) ([]byte, error)

CRC calculates the CRC of the data using the card chip.

func (*LowLevel) CardWrite

func (r *LowLevel) CardWrite(command byte, data []byte) ([]byte, int, error)

CardWrite the low-level interface to write some raw commands to the card.

command - the command register
data - the data to write out to the card using the authenticated sector.

func (*LowLevel) ClearBitmask

func (r *LowLevel) ClearBitmask(address, mask int) error

ClearBitmask clears register bit.

func (*LowLevel) DevRead

func (r *LowLevel) DevRead(address int) (byte, error)

DevRead gets data from a device.

func (*LowLevel) DevWrite

func (r *LowLevel) DevWrite(address int, data byte) error

DevWrite sends data to a device.

func (*LowLevel) SetBitmask

func (r *LowLevel) SetBitmask(address, mask int) error

SetBitmask sets register bit.

func (*LowLevel) StopCrypto

func (r *LowLevel) StopCrypto() error

StopCrypto stops the crypto chip.

func (*LowLevel) String

func (r *LowLevel) String() string

String implements conn.Resource.

func (*LowLevel) WaitForEdge

func (r *LowLevel) WaitForEdge(timeout time.Duration) bool

WaitForEdge waits for an IRQ pin to strobe.