e2e

README

Crossplane End-to-end Tests

This directory contains Crossplane's E2E tests. These tests exercise Crossplane features by:

1. Creating a kind cluster.
2. Deploying Crossplane, using its Helm chart.
3. Applying a series of YAML manifests.
4. Testing whether the resulting resources work as expected.

These tests focus on core Crossplane features - i.e. the package manager, Composition, etc. They should not take dependencies on 'real' Crossplane providers or external systems. Instead they use 'fake' providers like provider-nop and provider-dummy.

All Crossplane features must be exercised by these tests, as well as unit tests.

Running Tests

Run make e2e to run E2E tests.

This compiles Crossplane and an E2E test binary. It then runs the test binary. Use the E2E_TEST_FLAGS to pass flags to the test binary. For example:

# Most tests use t.Log to explain what they're doing. Use the -test.v flag
# (equivalent to go test -v) to see detailed test progress and logs.
E2E_TEST_FLAGS="-test.v" make e2e

# Some functions that setup the test environment (e.g. kind) use the klog logger
# The -v flag controls the verbosity of klog. Use -v=4 for debug logging.
E2E_TEST_FLAGS="-test.v -v=4" make e2e

# To run only a specific test, match it by regular expression
E2E_TEST_FLAGS="-test.run ^TestConfiguration" make e2e

# To test features with certain labels, use the labels flag
E2E_TEST_FLAGS="-labels area=apiextensions" make e2e

# To test a specific feature, use the feature flag
E2E_TEST_FLAGS="-feature=ConfigurationWithDependency" make e2e

# Stop immediately on first test failure, and leave the kind cluster to debug.
E2E_TEST_FLAGS="-test.v -test.failfast -destroy-kind-cluster=false"

# Use an existing Kubernetes cluster. Note that the E2E tests can't deploy your
# local build of Crossplane in this scenario, so you'll have to do it yourself.
E2E_TEST_FLAGS="-create-kind-cluster=false -destroy-kind-cluster=false -kubeconfig=$HOME/.kube/config" make e2e

# Run the CrossplaneUpgrade feature, against an existing kind cluster named
# "kind" (or creating it if it doesn't exist), # without installing Crossplane
# first, as the feature expects the cluster to be empty, but still loading the
# images to it. Setting the tests to fail fast and not destroying the cluster
# afterward in order to allow debugging it.
E2E_TEST_FLAGS="-test.v -v 4 -test.failfast \
  -destroy-kind-cluster=false \
  -kind-cluster-name=kind \
  -preinstall-crossplane=false \
  -feature=CrossplaneUpgrade" make e2e

# Run all the tests not installing or upgrading Crossplane against the currently
# selected cluster where Crossplane has already been installed.
E2E_TEST_FLAGS="-test.v -v 4 -test.failfast \
  -kubeconfig=$HOME/.kube/config \
  -skip-labels modify-crossplane-installation=true \
  -create-kind-cluster=false \
  -preinstall-crossplane=false" make go.build e2e-run-tests

# Run the composition-webhook-schema-validation suite of tests, which will
# result in all tests marked as "test-suite=base" or
# "test-suite=composition-webhook-schema-validation" being run against a kind
# cluster with Crossplane installed with composition-webhook-schema-validation
# enabled
E2E_TEST_FLAGS="-test.v -v 4 -test.failfast \
  -test-suite=composition-webhook-schema-validation " make e2e

Test Parallelism

make e2e runs all defined E2E tests serially. Tests do not run in parallel. This is because all tests run against the same API server and Crossplane has a lot of cluster-scoped state - XRDs, Providers, Compositions, etc. It's easier and less error-prone to write tests when you don't have to worry about one test potentially conflicting with another - for example by installing the same provider another test would install.

The CI GitHub workflow uses a matrix strategy to run multiple jobs in parallel, each running a test suite, see the dedicated section for more details.

We are currently splitting the tests to be able to run all basic tests against the default installation of Crossplane, and for each alpha feature covered we run all basic tests plus the feature specific ones against a Crossplane installation with the feature enabled.

In the future we could think of improving parallelism by, for example, adding the area to the matrix or spinning multiple kind clusters for each job.

Test Suite

In order to be able to run specific subsets of tests, we introduced the concept of test suites. To run a specific test suite use the -test-suite flag.

A test suite is currently defined by:

• A key to be used as value of the -test-suite flag.
• A set of labels that will be used to filter the tests to run, which will be added to the user-provided ones, preserving the latter ones in case of key conflicts.
• A list of Helm install options defining the initial Crossplane installation for the given test suite, which will be used to install Crossplane before running the tests. E.g. adding flags to enable alpha features and feature specific flags.
• A list of additional setup steps to be run before installing Crossplane and running the tests. E.g. Loading additional images into the cluster.
• Whether the suite should include the default suite or not, meaning that install options will be added to the default ones if not explicitly specified not to do so.

Test suites enable use cases such as installing Crossplane with a specific alpha feature enabled and running all the basic tests, plus the ones specific to that feature, to make sure the feature is not breaking any default behavior.

In case a test needs a specific Crossplane configuration, it must still take care of upgrading the installation to the desired configuration, but should then use environment.GetSelectedSuiteInstallOpts to retrieve at runtime the baseline installation options to be sure to restore the previous state. This allows tests to run against any suite if needed.

Test suites can be combined with labels to run a subset of tests, e.g. splitting by area, or with the usual Go -run <regexp> flag to run only specific tests, in such case, suite labels will be ignored altogether.

Adding a Test

We're still learning what the best way to arrange E2E tests is. It's okay for this pattern to change if it's not working well, but please discuss first!

We try to follow this pattern when adding a new test:

1. Define a single feature per Test function, if possible.
2. Setup a directory of plain YAML manifests per test - i.e. test fixtures - at e2e/manifests/<area>/<test>, usually with a setup sub-folder containing resources to be deployed at setup phase and cleaned up during the teardown. Try to avoid reusing other feature's fixtures, as this would introduce hidden dependencies between tests.
3. Try reusing existing helpers as much as possible, see package github.com/crossplane/crossplane/test/e2e/funcs, or add new ones there if needed.
4. Prefer using the Fluent APIs to define features (features.New(...).WithSetup(...).Assess(...).WithTeardown(...).Feature()).
   1. features.Table should be used only to define multiple self-contained assessments to be run sequentially, but without assuming any ordering among them, similarly to the usual table driven style we adopt for unit testing.
5. Prefer the usage of WithSetup and WithTeardown to their unnamed counterparts (Setup and Teardown) to define the setup and teardown phases of a feature, as they allow to provide a description.
6. Use short but explicative CamelCase sentences as descriptions for everything used to define the name of tests/subtests, e.g. features.New("CrossplaneUpgrade", ...) WithSetup("InstallProviderNop", ...), Assess("ProviderNopIsInstalled", ...), WithTeardown("UninstallProviderNop", ...).
7. Use the Setup and Teardown phases to define respectively actions that are not strictly part of the feature being tested, but are needed to make it work, and actions that are needed to clean up the environment after the test has run.
8. Use Assess steps to define the steps required to exercise the actual feature at hand.
9. Use Assess steps to define both conditions that should hold and actions that should be performed. In the former case use active descriptions, e.g. InstallProviderNop, while in the latter use passive descriptions, e.g. ProviderNopIsInstalled.
10. Try to group actions and the checks of what you have done Assess step in a single step with an active description if possible, to avoid having twice the steps and making it explicit that we are checking the action executed by the previous function. e.g. "UpgradeProvider" should both upgrade the provider and check that it becomes healthy within a reasonable time.
11. Avoid using the available context to pass data between steps, as it makes it harder to understand the flow of the test and could lead to data races if not handled properly.
12. Keep in mind that all Setup and Teardown steps, wherever are defined are always going to be executed respectively before and after all the Assess steps defined, so you can define Teardowns immediately after the step that defined the resource to be deleted as a sort of defer statement. Same applies to Setup steps which could actually be located immediately before the step requiring them. But be careful with this, as a non-linear narrative is going to be easier to follow, so if possible stick to all Setups at the beginning and all Teardowns at the end of the feature.
13. Features can be assigned labels, to allow dicing and slicing the test suite, see below for more details about available labels, but overall try to define all the labels that could be useful to select the test in the future and make sure it's actually being selected when run in CI.

Here an example of a test following the above guidelines:

package e2e

// ...

// TestSomeFeature ...
func TestSomeFeature(t *testing.T) {
	manifests := "test/e2e/manifests/pkg/some-area/some-feature"
	namespace := "some-namespace"
	// ... other variables or constants ...

	environment.Test(t,
		features.New(t.Name()).
			WithLabel(LabelArea, ...).
			WithLabel(LabelSize, ...).
			WithLabel(config.LabelTestSuite, config.TestSuiteDefault).
			// ...
			WithSetup("ReadyPrerequisites", ... ).
			// ... other setup steps ...
			Assess("DoSomething", ... ).
			Assess("SomethingElseIsInSomeState", ... ).
			// ... other assess steps ...
			WithTeardown("DeleteCreatedResources", ...).
			// ... other teardown steps ...
			Feature(),
	)
}

// ...

Features' Labels

Features are grouped into broad feature areas - e.g. TestComposition in composition_test.go. Features pertaining to Composition should be added to TestComposition.

Some tests may involve updating an existing test - for example you might test a new kind of transform by updating the composition/patch-and-transform manifests and adding a new assessment or two to the pandt features.Table.

Other, larger tests may involve creating a new directory of manifests and a new features.Table. Every features.Table must be passed to environment.Test to be run.

When you pass a feature to environment.Test you can add arbitrary labels that may be used to filter which tests are run. Common labels include:

• area: The area of Crossplane being tested - pkg, apiextensions, etc.
• size: small if the test completes in under a minute, otherwise large.

If you add a new area label, be sure to add it to the matrix strategy of the e2e-tests job in the CI GitHub workflow. We run E2E tests for each area of Crossplane in parallel.

When adding a test:

• Use commentary to explain what your tests should do.
• Use brief CamelCase test names, not descriptive sentences.
• Avoid adding complex logic in the e2e package.
• Implement new test logic as a features.Func in the e2e/funcs package.

Design Principals

The goals of these tests are to:

• Simulate real-world use to exercise all of Crossplane's functionality.
• Run reliably, with no flaky tests.
• Converge on requiring mostly updated manifests - and little Go - to add tests.
• Use tools and patterns that are familiar and unsurprising to contributors.

The following design principals help achieve these goals:

• Use familiar Kubernetes YAML manifests as test fixtures.
• Provide a library of reusable test functions (e.g. funcs.ResourcesCreatedIn).
• Remain as close to idiomatic Go stdlib testing tests as possible.
• Use common, idiomatic Kubernetes ecosystem tooling - e2e-framework.
• Implement as much logic in Go as possible - avoid scripts or shelling out.

Refer to the E2E one-pager for more context.

Documentation

Overview

Package e2e implements end-to-end tests for Crossplane.

Index

• Constants

Constants

const (
	// LabelStageAlpha is used for tests of alpha features.
	LabelStageAlpha = "alpha"

	// LabelStageBeta is used for tests of beta features.
	LabelStageBeta = "beta"
)

const (
	// LabelSizeSmall is used for tests that usually complete in a minute.
	LabelSizeSmall = "small"

	// LabelSizeLarge is used for test that usually complete in over a minute.
	LabelSizeLarge = "large"
)

const FieldManager = "crossplane-e2e-tests"

FieldManager is the server-side apply field manager used when applying manifests.

const LabelArea = "area"

LabelArea represents the 'area' of a feature. For example 'apiextensions', 'pkg', etc. Assessments roll up to features, which roll up to feature areas. Features within an area may be split across different test functions.

const LabelModifyCrossplaneInstallation = "modify-crossplane-installation"

LabelModifyCrossplaneInstallation is used to mark tests that are going to modify Crossplane's installation, e.g. installing, uninstalling or upgrading it.

const LabelModifyCrossplaneInstallationTrue = "true"

LabelModifyCrossplaneInstallationTrue is used to mark tests that are going to modify Crossplane's installation.

const LabelSize = "size"

LabelSize represents the 'size' (i.e. duration) of a test.

const LabelStage = "stage"

LabelStage represents the 'stage' of a feature - alpha, beta, etc. Generally available features have no stage label.