Documentation ¶
Overview ¶
Package clouddirectory provides a client for Amazon CloudDirectory.
Index ¶
- Constants
- type AddFacetToObjectInput
- func (s AddFacetToObjectInput) GoString() string
- func (s *AddFacetToObjectInput) SetDirectoryArn(v string) *AddFacetToObjectInput
- func (s *AddFacetToObjectInput) SetObjectAttributeList(v []*AttributeKeyAndValue) *AddFacetToObjectInput
- func (s *AddFacetToObjectInput) SetObjectReference(v *ObjectReference) *AddFacetToObjectInput
- func (s *AddFacetToObjectInput) SetSchemaFacet(v *SchemaFacet) *AddFacetToObjectInput
- func (s AddFacetToObjectInput) String() string
- func (s *AddFacetToObjectInput) Validate() error
- type AddFacetToObjectOutput
- type ApplySchemaInput
- type ApplySchemaOutput
- type AttachObjectInput
- func (s AttachObjectInput) GoString() string
- func (s *AttachObjectInput) SetChildReference(v *ObjectReference) *AttachObjectInput
- func (s *AttachObjectInput) SetDirectoryArn(v string) *AttachObjectInput
- func (s *AttachObjectInput) SetLinkName(v string) *AttachObjectInput
- func (s *AttachObjectInput) SetParentReference(v *ObjectReference) *AttachObjectInput
- func (s AttachObjectInput) String() string
- func (s *AttachObjectInput) Validate() error
- type AttachObjectOutput
- type AttachPolicyInput
- func (s AttachPolicyInput) GoString() string
- func (s *AttachPolicyInput) SetDirectoryArn(v string) *AttachPolicyInput
- func (s *AttachPolicyInput) SetObjectReference(v *ObjectReference) *AttachPolicyInput
- func (s *AttachPolicyInput) SetPolicyReference(v *ObjectReference) *AttachPolicyInput
- func (s AttachPolicyInput) String() string
- func (s *AttachPolicyInput) Validate() error
- type AttachPolicyOutput
- type AttachToIndexInput
- func (s AttachToIndexInput) GoString() string
- func (s *AttachToIndexInput) SetDirectoryArn(v string) *AttachToIndexInput
- func (s *AttachToIndexInput) SetIndexReference(v *ObjectReference) *AttachToIndexInput
- func (s *AttachToIndexInput) SetTargetReference(v *ObjectReference) *AttachToIndexInput
- func (s AttachToIndexInput) String() string
- func (s *AttachToIndexInput) Validate() error
- type AttachToIndexOutput
- type AttributeKey
- type AttributeKeyAndValue
- func (s AttributeKeyAndValue) GoString() string
- func (s *AttributeKeyAndValue) SetKey(v *AttributeKey) *AttributeKeyAndValue
- func (s *AttributeKeyAndValue) SetValue(v *TypedAttributeValue) *AttributeKeyAndValue
- func (s AttributeKeyAndValue) String() string
- func (s *AttributeKeyAndValue) Validate() error
- type BatchAddFacetToObject
- func (s BatchAddFacetToObject) GoString() string
- func (s *BatchAddFacetToObject) SetObjectAttributeList(v []*AttributeKeyAndValue) *BatchAddFacetToObject
- func (s *BatchAddFacetToObject) SetObjectReference(v *ObjectReference) *BatchAddFacetToObject
- func (s *BatchAddFacetToObject) SetSchemaFacet(v *SchemaFacet) *BatchAddFacetToObject
- func (s BatchAddFacetToObject) String() string
- func (s *BatchAddFacetToObject) Validate() error
- type BatchAddFacetToObjectResponse
- type BatchAttachObject
- func (s BatchAttachObject) GoString() string
- func (s *BatchAttachObject) SetChildReference(v *ObjectReference) *BatchAttachObject
- func (s *BatchAttachObject) SetLinkName(v string) *BatchAttachObject
- func (s *BatchAttachObject) SetParentReference(v *ObjectReference) *BatchAttachObject
- func (s BatchAttachObject) String() string
- func (s *BatchAttachObject) Validate() error
- type BatchAttachObjectResponse
- type BatchCreateObject
- func (s BatchCreateObject) GoString() string
- func (s *BatchCreateObject) SetBatchReferenceName(v string) *BatchCreateObject
- func (s *BatchCreateObject) SetLinkName(v string) *BatchCreateObject
- func (s *BatchCreateObject) SetObjectAttributeList(v []*AttributeKeyAndValue) *BatchCreateObject
- func (s *BatchCreateObject) SetParentReference(v *ObjectReference) *BatchCreateObject
- func (s *BatchCreateObject) SetSchemaFacet(v []*SchemaFacet) *BatchCreateObject
- func (s BatchCreateObject) String() string
- func (s *BatchCreateObject) Validate() error
- type BatchCreateObjectResponse
- type BatchDeleteObject
- type BatchDeleteObjectResponse
- type BatchDetachObject
- func (s BatchDetachObject) GoString() string
- func (s *BatchDetachObject) SetBatchReferenceName(v string) *BatchDetachObject
- func (s *BatchDetachObject) SetLinkName(v string) *BatchDetachObject
- func (s *BatchDetachObject) SetParentReference(v *ObjectReference) *BatchDetachObject
- func (s BatchDetachObject) String() string
- func (s *BatchDetachObject) Validate() error
- type BatchDetachObjectResponse
- type BatchListObjectAttributes
- func (s BatchListObjectAttributes) GoString() string
- func (s *BatchListObjectAttributes) SetMaxResults(v int64) *BatchListObjectAttributes
- func (s *BatchListObjectAttributes) SetNextToken(v string) *BatchListObjectAttributes
- func (s *BatchListObjectAttributes) SetObjectReference(v *ObjectReference) *BatchListObjectAttributes
- func (s BatchListObjectAttributes) String() string
- func (s *BatchListObjectAttributes) Validate() error
- type BatchListObjectAttributesResponse
- func (s BatchListObjectAttributesResponse) GoString() string
- func (s *BatchListObjectAttributesResponse) SetAttributes(v []*AttributeKeyAndValue) *BatchListObjectAttributesResponse
- func (s *BatchListObjectAttributesResponse) SetNextToken(v string) *BatchListObjectAttributesResponse
- func (s BatchListObjectAttributesResponse) String() string
- type BatchListObjectChildren
- func (s BatchListObjectChildren) GoString() string
- func (s *BatchListObjectChildren) SetMaxResults(v int64) *BatchListObjectChildren
- func (s *BatchListObjectChildren) SetNextToken(v string) *BatchListObjectChildren
- func (s *BatchListObjectChildren) SetObjectReference(v *ObjectReference) *BatchListObjectChildren
- func (s BatchListObjectChildren) String() string
- func (s *BatchListObjectChildren) Validate() error
- type BatchListObjectChildrenResponse
- func (s BatchListObjectChildrenResponse) GoString() string
- func (s *BatchListObjectChildrenResponse) SetChildren(v map[string]*string) *BatchListObjectChildrenResponse
- func (s *BatchListObjectChildrenResponse) SetNextToken(v string) *BatchListObjectChildrenResponse
- func (s BatchListObjectChildrenResponse) String() string
- type BatchReadException
- type BatchReadInput
- func (s BatchReadInput) GoString() string
- func (s *BatchReadInput) SetConsistencyLevel(v string) *BatchReadInput
- func (s *BatchReadInput) SetDirectoryArn(v string) *BatchReadInput
- func (s *BatchReadInput) SetOperations(v []*BatchReadOperation) *BatchReadInput
- func (s BatchReadInput) String() string
- func (s *BatchReadInput) Validate() error
- type BatchReadOperation
- func (s BatchReadOperation) GoString() string
- func (s *BatchReadOperation) SetListObjectAttributes(v *BatchListObjectAttributes) *BatchReadOperation
- func (s *BatchReadOperation) SetListObjectChildren(v *BatchListObjectChildren) *BatchReadOperation
- func (s BatchReadOperation) String() string
- func (s *BatchReadOperation) Validate() error
- type BatchReadOperationResponse
- func (s BatchReadOperationResponse) GoString() string
- func (s *BatchReadOperationResponse) SetExceptionResponse(v *BatchReadException) *BatchReadOperationResponse
- func (s *BatchReadOperationResponse) SetSuccessfulResponse(v *BatchReadSuccessfulResponse) *BatchReadOperationResponse
- func (s BatchReadOperationResponse) String() string
- type BatchReadOutput
- type BatchReadSuccessfulResponse
- func (s BatchReadSuccessfulResponse) GoString() string
- func (s *BatchReadSuccessfulResponse) SetListObjectAttributes(v *BatchListObjectAttributesResponse) *BatchReadSuccessfulResponse
- func (s *BatchReadSuccessfulResponse) SetListObjectChildren(v *BatchListObjectChildrenResponse) *BatchReadSuccessfulResponse
- func (s BatchReadSuccessfulResponse) String() string
- type BatchRemoveFacetFromObject
- func (s BatchRemoveFacetFromObject) GoString() string
- func (s *BatchRemoveFacetFromObject) SetObjectReference(v *ObjectReference) *BatchRemoveFacetFromObject
- func (s *BatchRemoveFacetFromObject) SetSchemaFacet(v *SchemaFacet) *BatchRemoveFacetFromObject
- func (s BatchRemoveFacetFromObject) String() string
- func (s *BatchRemoveFacetFromObject) Validate() error
- type BatchRemoveFacetFromObjectResponse
- type BatchUpdateObjectAttributes
- func (s BatchUpdateObjectAttributes) GoString() string
- func (s *BatchUpdateObjectAttributes) SetAttributeUpdates(v []*ObjectAttributeUpdate) *BatchUpdateObjectAttributes
- func (s *BatchUpdateObjectAttributes) SetObjectReference(v *ObjectReference) *BatchUpdateObjectAttributes
- func (s BatchUpdateObjectAttributes) String() string
- func (s *BatchUpdateObjectAttributes) Validate() error
- type BatchUpdateObjectAttributesResponse
- type BatchWriteInput
- type BatchWriteOperation
- func (s BatchWriteOperation) GoString() string
- func (s *BatchWriteOperation) SetAddFacetToObject(v *BatchAddFacetToObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetAttachObject(v *BatchAttachObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetCreateObject(v *BatchCreateObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetDeleteObject(v *BatchDeleteObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetDetachObject(v *BatchDetachObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetRemoveFacetFromObject(v *BatchRemoveFacetFromObject) *BatchWriteOperation
- func (s *BatchWriteOperation) SetUpdateObjectAttributes(v *BatchUpdateObjectAttributes) *BatchWriteOperation
- func (s BatchWriteOperation) String() string
- func (s *BatchWriteOperation) Validate() error
- type BatchWriteOperationResponse
- func (s BatchWriteOperationResponse) GoString() string
- func (s *BatchWriteOperationResponse) SetAddFacetToObject(v *BatchAddFacetToObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetAttachObject(v *BatchAttachObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetCreateObject(v *BatchCreateObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetDeleteObject(v *BatchDeleteObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetDetachObject(v *BatchDetachObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetRemoveFacetFromObject(v *BatchRemoveFacetFromObjectResponse) *BatchWriteOperationResponse
- func (s *BatchWriteOperationResponse) SetUpdateObjectAttributes(v *BatchUpdateObjectAttributesResponse) *BatchWriteOperationResponse
- func (s BatchWriteOperationResponse) String() string
- type BatchWriteOutput
- type CloudDirectory
- func (c *CloudDirectory) AddFacetToObject(input *AddFacetToObjectInput) (*AddFacetToObjectOutput, error)
- func (c *CloudDirectory) AddFacetToObjectRequest(input *AddFacetToObjectInput) (req *request.Request, output *AddFacetToObjectOutput)
- func (c *CloudDirectory) ApplySchema(input *ApplySchemaInput) (*ApplySchemaOutput, error)
- func (c *CloudDirectory) ApplySchemaRequest(input *ApplySchemaInput) (req *request.Request, output *ApplySchemaOutput)
- func (c *CloudDirectory) AttachObject(input *AttachObjectInput) (*AttachObjectOutput, error)
- func (c *CloudDirectory) AttachObjectRequest(input *AttachObjectInput) (req *request.Request, output *AttachObjectOutput)
- func (c *CloudDirectory) AttachPolicy(input *AttachPolicyInput) (*AttachPolicyOutput, error)
- func (c *CloudDirectory) AttachPolicyRequest(input *AttachPolicyInput) (req *request.Request, output *AttachPolicyOutput)
- func (c *CloudDirectory) AttachToIndex(input *AttachToIndexInput) (*AttachToIndexOutput, error)
- func (c *CloudDirectory) AttachToIndexRequest(input *AttachToIndexInput) (req *request.Request, output *AttachToIndexOutput)
- func (c *CloudDirectory) BatchRead(input *BatchReadInput) (*BatchReadOutput, error)
- func (c *CloudDirectory) BatchReadRequest(input *BatchReadInput) (req *request.Request, output *BatchReadOutput)
- func (c *CloudDirectory) BatchWrite(input *BatchWriteInput) (*BatchWriteOutput, error)
- func (c *CloudDirectory) BatchWriteRequest(input *BatchWriteInput) (req *request.Request, output *BatchWriteOutput)
- func (c *CloudDirectory) CreateDirectory(input *CreateDirectoryInput) (*CreateDirectoryOutput, error)
- func (c *CloudDirectory) CreateDirectoryRequest(input *CreateDirectoryInput) (req *request.Request, output *CreateDirectoryOutput)
- func (c *CloudDirectory) CreateFacet(input *CreateFacetInput) (*CreateFacetOutput, error)
- func (c *CloudDirectory) CreateFacetRequest(input *CreateFacetInput) (req *request.Request, output *CreateFacetOutput)
- func (c *CloudDirectory) CreateIndex(input *CreateIndexInput) (*CreateIndexOutput, error)
- func (c *CloudDirectory) CreateIndexRequest(input *CreateIndexInput) (req *request.Request, output *CreateIndexOutput)
- func (c *CloudDirectory) CreateObject(input *CreateObjectInput) (*CreateObjectOutput, error)
- func (c *CloudDirectory) CreateObjectRequest(input *CreateObjectInput) (req *request.Request, output *CreateObjectOutput)
- func (c *CloudDirectory) CreateSchema(input *CreateSchemaInput) (*CreateSchemaOutput, error)
- func (c *CloudDirectory) CreateSchemaRequest(input *CreateSchemaInput) (req *request.Request, output *CreateSchemaOutput)
- func (c *CloudDirectory) DeleteDirectory(input *DeleteDirectoryInput) (*DeleteDirectoryOutput, error)
- func (c *CloudDirectory) DeleteDirectoryRequest(input *DeleteDirectoryInput) (req *request.Request, output *DeleteDirectoryOutput)
- func (c *CloudDirectory) DeleteFacet(input *DeleteFacetInput) (*DeleteFacetOutput, error)
- func (c *CloudDirectory) DeleteFacetRequest(input *DeleteFacetInput) (req *request.Request, output *DeleteFacetOutput)
- func (c *CloudDirectory) DeleteObject(input *DeleteObjectInput) (*DeleteObjectOutput, error)
- func (c *CloudDirectory) DeleteObjectRequest(input *DeleteObjectInput) (req *request.Request, output *DeleteObjectOutput)
- func (c *CloudDirectory) DeleteSchema(input *DeleteSchemaInput) (*DeleteSchemaOutput, error)
- func (c *CloudDirectory) DeleteSchemaRequest(input *DeleteSchemaInput) (req *request.Request, output *DeleteSchemaOutput)
- func (c *CloudDirectory) DetachFromIndex(input *DetachFromIndexInput) (*DetachFromIndexOutput, error)
- func (c *CloudDirectory) DetachFromIndexRequest(input *DetachFromIndexInput) (req *request.Request, output *DetachFromIndexOutput)
- func (c *CloudDirectory) DetachObject(input *DetachObjectInput) (*DetachObjectOutput, error)
- func (c *CloudDirectory) DetachObjectRequest(input *DetachObjectInput) (req *request.Request, output *DetachObjectOutput)
- func (c *CloudDirectory) DetachPolicy(input *DetachPolicyInput) (*DetachPolicyOutput, error)
- func (c *CloudDirectory) DetachPolicyRequest(input *DetachPolicyInput) (req *request.Request, output *DetachPolicyOutput)
- func (c *CloudDirectory) DisableDirectory(input *DisableDirectoryInput) (*DisableDirectoryOutput, error)
- func (c *CloudDirectory) DisableDirectoryRequest(input *DisableDirectoryInput) (req *request.Request, output *DisableDirectoryOutput)
- func (c *CloudDirectory) EnableDirectory(input *EnableDirectoryInput) (*EnableDirectoryOutput, error)
- func (c *CloudDirectory) EnableDirectoryRequest(input *EnableDirectoryInput) (req *request.Request, output *EnableDirectoryOutput)
- func (c *CloudDirectory) GetDirectory(input *GetDirectoryInput) (*GetDirectoryOutput, error)
- func (c *CloudDirectory) GetDirectoryRequest(input *GetDirectoryInput) (req *request.Request, output *GetDirectoryOutput)
- func (c *CloudDirectory) GetFacet(input *GetFacetInput) (*GetFacetOutput, error)
- func (c *CloudDirectory) GetFacetRequest(input *GetFacetInput) (req *request.Request, output *GetFacetOutput)
- func (c *CloudDirectory) GetObjectInformation(input *GetObjectInformationInput) (*GetObjectInformationOutput, error)
- func (c *CloudDirectory) GetObjectInformationRequest(input *GetObjectInformationInput) (req *request.Request, output *GetObjectInformationOutput)
- func (c *CloudDirectory) GetSchemaAsJson(input *GetSchemaAsJsonInput) (*GetSchemaAsJsonOutput, error)
- func (c *CloudDirectory) GetSchemaAsJsonRequest(input *GetSchemaAsJsonInput) (req *request.Request, output *GetSchemaAsJsonOutput)
- func (c *CloudDirectory) ListAppliedSchemaArns(input *ListAppliedSchemaArnsInput) (*ListAppliedSchemaArnsOutput, error)
- func (c *CloudDirectory) ListAppliedSchemaArnsPages(input *ListAppliedSchemaArnsInput, ...) error
- func (c *CloudDirectory) ListAppliedSchemaArnsRequest(input *ListAppliedSchemaArnsInput) (req *request.Request, output *ListAppliedSchemaArnsOutput)
- func (c *CloudDirectory) ListAttachedIndices(input *ListAttachedIndicesInput) (*ListAttachedIndicesOutput, error)
- func (c *CloudDirectory) ListAttachedIndicesPages(input *ListAttachedIndicesInput, ...) error
- func (c *CloudDirectory) ListAttachedIndicesRequest(input *ListAttachedIndicesInput) (req *request.Request, output *ListAttachedIndicesOutput)
- func (c *CloudDirectory) ListDevelopmentSchemaArns(input *ListDevelopmentSchemaArnsInput) (*ListDevelopmentSchemaArnsOutput, error)
- func (c *CloudDirectory) ListDevelopmentSchemaArnsPages(input *ListDevelopmentSchemaArnsInput, ...) error
- func (c *CloudDirectory) ListDevelopmentSchemaArnsRequest(input *ListDevelopmentSchemaArnsInput) (req *request.Request, output *ListDevelopmentSchemaArnsOutput)
- func (c *CloudDirectory) ListDirectories(input *ListDirectoriesInput) (*ListDirectoriesOutput, error)
- func (c *CloudDirectory) ListDirectoriesPages(input *ListDirectoriesInput, ...) error
- func (c *CloudDirectory) ListDirectoriesRequest(input *ListDirectoriesInput) (req *request.Request, output *ListDirectoriesOutput)
- func (c *CloudDirectory) ListFacetAttributes(input *ListFacetAttributesInput) (*ListFacetAttributesOutput, error)
- func (c *CloudDirectory) ListFacetAttributesPages(input *ListFacetAttributesInput, ...) error
- func (c *CloudDirectory) ListFacetAttributesRequest(input *ListFacetAttributesInput) (req *request.Request, output *ListFacetAttributesOutput)
- func (c *CloudDirectory) ListFacetNames(input *ListFacetNamesInput) (*ListFacetNamesOutput, error)
- func (c *CloudDirectory) ListFacetNamesPages(input *ListFacetNamesInput, ...) error
- func (c *CloudDirectory) ListFacetNamesRequest(input *ListFacetNamesInput) (req *request.Request, output *ListFacetNamesOutput)
- func (c *CloudDirectory) ListIndex(input *ListIndexInput) (*ListIndexOutput, error)
- func (c *CloudDirectory) ListIndexPages(input *ListIndexInput, ...) error
- func (c *CloudDirectory) ListIndexRequest(input *ListIndexInput) (req *request.Request, output *ListIndexOutput)
- func (c *CloudDirectory) ListObjectAttributes(input *ListObjectAttributesInput) (*ListObjectAttributesOutput, error)
- func (c *CloudDirectory) ListObjectAttributesPages(input *ListObjectAttributesInput, ...) error
- func (c *CloudDirectory) ListObjectAttributesRequest(input *ListObjectAttributesInput) (req *request.Request, output *ListObjectAttributesOutput)
- func (c *CloudDirectory) ListObjectChildren(input *ListObjectChildrenInput) (*ListObjectChildrenOutput, error)
- func (c *CloudDirectory) ListObjectChildrenPages(input *ListObjectChildrenInput, ...) error
- func (c *CloudDirectory) ListObjectChildrenRequest(input *ListObjectChildrenInput) (req *request.Request, output *ListObjectChildrenOutput)
- func (c *CloudDirectory) ListObjectParentPaths(input *ListObjectParentPathsInput) (*ListObjectParentPathsOutput, error)
- func (c *CloudDirectory) ListObjectParentPathsPages(input *ListObjectParentPathsInput, ...) error
- func (c *CloudDirectory) ListObjectParentPathsRequest(input *ListObjectParentPathsInput) (req *request.Request, output *ListObjectParentPathsOutput)
- func (c *CloudDirectory) ListObjectParents(input *ListObjectParentsInput) (*ListObjectParentsOutput, error)
- func (c *CloudDirectory) ListObjectParentsPages(input *ListObjectParentsInput, ...) error
- func (c *CloudDirectory) ListObjectParentsRequest(input *ListObjectParentsInput) (req *request.Request, output *ListObjectParentsOutput)
- func (c *CloudDirectory) ListObjectPolicies(input *ListObjectPoliciesInput) (*ListObjectPoliciesOutput, error)
- func (c *CloudDirectory) ListObjectPoliciesPages(input *ListObjectPoliciesInput, ...) error
- func (c *CloudDirectory) ListObjectPoliciesRequest(input *ListObjectPoliciesInput) (req *request.Request, output *ListObjectPoliciesOutput)
- func (c *CloudDirectory) ListPolicyAttachments(input *ListPolicyAttachmentsInput) (*ListPolicyAttachmentsOutput, error)
- func (c *CloudDirectory) ListPolicyAttachmentsPages(input *ListPolicyAttachmentsInput, ...) error
- func (c *CloudDirectory) ListPolicyAttachmentsRequest(input *ListPolicyAttachmentsInput) (req *request.Request, output *ListPolicyAttachmentsOutput)
- func (c *CloudDirectory) ListPublishedSchemaArns(input *ListPublishedSchemaArnsInput) (*ListPublishedSchemaArnsOutput, error)
- func (c *CloudDirectory) ListPublishedSchemaArnsPages(input *ListPublishedSchemaArnsInput, ...) error
- func (c *CloudDirectory) ListPublishedSchemaArnsRequest(input *ListPublishedSchemaArnsInput) (req *request.Request, output *ListPublishedSchemaArnsOutput)
- func (c *CloudDirectory) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)
- func (c *CloudDirectory) ListTagsForResourcePages(input *ListTagsForResourceInput, ...) error
- func (c *CloudDirectory) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)
- func (c *CloudDirectory) LookupPolicy(input *LookupPolicyInput) (*LookupPolicyOutput, error)
- func (c *CloudDirectory) LookupPolicyPages(input *LookupPolicyInput, ...) error
- func (c *CloudDirectory) LookupPolicyRequest(input *LookupPolicyInput) (req *request.Request, output *LookupPolicyOutput)
- func (c *CloudDirectory) PublishSchema(input *PublishSchemaInput) (*PublishSchemaOutput, error)
- func (c *CloudDirectory) PublishSchemaRequest(input *PublishSchemaInput) (req *request.Request, output *PublishSchemaOutput)
- func (c *CloudDirectory) PutSchemaFromJson(input *PutSchemaFromJsonInput) (*PutSchemaFromJsonOutput, error)
- func (c *CloudDirectory) PutSchemaFromJsonRequest(input *PutSchemaFromJsonInput) (req *request.Request, output *PutSchemaFromJsonOutput)
- func (c *CloudDirectory) RemoveFacetFromObject(input *RemoveFacetFromObjectInput) (*RemoveFacetFromObjectOutput, error)
- func (c *CloudDirectory) RemoveFacetFromObjectRequest(input *RemoveFacetFromObjectInput) (req *request.Request, output *RemoveFacetFromObjectOutput)
- func (c *CloudDirectory) TagResource(input *TagResourceInput) (*TagResourceOutput, error)
- func (c *CloudDirectory) TagResourceRequest(input *TagResourceInput) (req *request.Request, output *TagResourceOutput)
- func (c *CloudDirectory) UntagResource(input *UntagResourceInput) (*UntagResourceOutput, error)
- func (c *CloudDirectory) UntagResourceRequest(input *UntagResourceInput) (req *request.Request, output *UntagResourceOutput)
- func (c *CloudDirectory) UpdateFacet(input *UpdateFacetInput) (*UpdateFacetOutput, error)
- func (c *CloudDirectory) UpdateFacetRequest(input *UpdateFacetInput) (req *request.Request, output *UpdateFacetOutput)
- func (c *CloudDirectory) UpdateObjectAttributes(input *UpdateObjectAttributesInput) (*UpdateObjectAttributesOutput, error)
- func (c *CloudDirectory) UpdateObjectAttributesRequest(input *UpdateObjectAttributesInput) (req *request.Request, output *UpdateObjectAttributesOutput)
- func (c *CloudDirectory) UpdateSchema(input *UpdateSchemaInput) (*UpdateSchemaOutput, error)
- func (c *CloudDirectory) UpdateSchemaRequest(input *UpdateSchemaInput) (req *request.Request, output *UpdateSchemaOutput)
- type CreateDirectoryInput
- type CreateDirectoryOutput
- func (s CreateDirectoryOutput) GoString() string
- func (s *CreateDirectoryOutput) SetAppliedSchemaArn(v string) *CreateDirectoryOutput
- func (s *CreateDirectoryOutput) SetDirectoryArn(v string) *CreateDirectoryOutput
- func (s *CreateDirectoryOutput) SetName(v string) *CreateDirectoryOutput
- func (s *CreateDirectoryOutput) SetObjectIdentifier(v string) *CreateDirectoryOutput
- func (s CreateDirectoryOutput) String() string
- type CreateFacetInput
- func (s CreateFacetInput) GoString() string
- func (s *CreateFacetInput) SetAttributes(v []*FacetAttribute) *CreateFacetInput
- func (s *CreateFacetInput) SetName(v string) *CreateFacetInput
- func (s *CreateFacetInput) SetObjectType(v string) *CreateFacetInput
- func (s *CreateFacetInput) SetSchemaArn(v string) *CreateFacetInput
- func (s CreateFacetInput) String() string
- func (s *CreateFacetInput) Validate() error
- type CreateFacetOutput
- type CreateIndexInput
- func (s CreateIndexInput) GoString() string
- func (s *CreateIndexInput) SetDirectoryArn(v string) *CreateIndexInput
- func (s *CreateIndexInput) SetIsUnique(v bool) *CreateIndexInput
- func (s *CreateIndexInput) SetLinkName(v string) *CreateIndexInput
- func (s *CreateIndexInput) SetOrderedIndexedAttributeList(v []*AttributeKey) *CreateIndexInput
- func (s *CreateIndexInput) SetParentReference(v *ObjectReference) *CreateIndexInput
- func (s CreateIndexInput) String() string
- func (s *CreateIndexInput) Validate() error
- type CreateIndexOutput
- type CreateObjectInput
- func (s CreateObjectInput) GoString() string
- func (s *CreateObjectInput) SetDirectoryArn(v string) *CreateObjectInput
- func (s *CreateObjectInput) SetLinkName(v string) *CreateObjectInput
- func (s *CreateObjectInput) SetObjectAttributeList(v []*AttributeKeyAndValue) *CreateObjectInput
- func (s *CreateObjectInput) SetParentReference(v *ObjectReference) *CreateObjectInput
- func (s *CreateObjectInput) SetSchemaFacets(v []*SchemaFacet) *CreateObjectInput
- func (s CreateObjectInput) String() string
- func (s *CreateObjectInput) Validate() error
- type CreateObjectOutput
- type CreateSchemaInput
- type CreateSchemaOutput
- type DeleteDirectoryInput
- type DeleteDirectoryOutput
- type DeleteFacetInput
- type DeleteFacetOutput
- type DeleteObjectInput
- type DeleteObjectOutput
- type DeleteSchemaInput
- type DeleteSchemaOutput
- type DetachFromIndexInput
- func (s DetachFromIndexInput) GoString() string
- func (s *DetachFromIndexInput) SetDirectoryArn(v string) *DetachFromIndexInput
- func (s *DetachFromIndexInput) SetIndexReference(v *ObjectReference) *DetachFromIndexInput
- func (s *DetachFromIndexInput) SetTargetReference(v *ObjectReference) *DetachFromIndexInput
- func (s DetachFromIndexInput) String() string
- func (s *DetachFromIndexInput) Validate() error
- type DetachFromIndexOutput
- type DetachObjectInput
- func (s DetachObjectInput) GoString() string
- func (s *DetachObjectInput) SetDirectoryArn(v string) *DetachObjectInput
- func (s *DetachObjectInput) SetLinkName(v string) *DetachObjectInput
- func (s *DetachObjectInput) SetParentReference(v *ObjectReference) *DetachObjectInput
- func (s DetachObjectInput) String() string
- func (s *DetachObjectInput) Validate() error
- type DetachObjectOutput
- type DetachPolicyInput
- func (s DetachPolicyInput) GoString() string
- func (s *DetachPolicyInput) SetDirectoryArn(v string) *DetachPolicyInput
- func (s *DetachPolicyInput) SetObjectReference(v *ObjectReference) *DetachPolicyInput
- func (s *DetachPolicyInput) SetPolicyReference(v *ObjectReference) *DetachPolicyInput
- func (s DetachPolicyInput) String() string
- func (s *DetachPolicyInput) Validate() error
- type DetachPolicyOutput
- type Directory
- type DisableDirectoryInput
- type DisableDirectoryOutput
- type EnableDirectoryInput
- type EnableDirectoryOutput
- type Facet
- type FacetAttribute
- func (s FacetAttribute) GoString() string
- func (s *FacetAttribute) SetAttributeDefinition(v *FacetAttributeDefinition) *FacetAttribute
- func (s *FacetAttribute) SetAttributeReference(v *FacetAttributeReference) *FacetAttribute
- func (s *FacetAttribute) SetName(v string) *FacetAttribute
- func (s *FacetAttribute) SetRequiredBehavior(v string) *FacetAttribute
- func (s FacetAttribute) String() string
- func (s *FacetAttribute) Validate() error
- type FacetAttributeDefinition
- func (s FacetAttributeDefinition) GoString() string
- func (s *FacetAttributeDefinition) SetDefaultValue(v *TypedAttributeValue) *FacetAttributeDefinition
- func (s *FacetAttributeDefinition) SetIsImmutable(v bool) *FacetAttributeDefinition
- func (s *FacetAttributeDefinition) SetRules(v map[string]*Rule) *FacetAttributeDefinition
- func (s *FacetAttributeDefinition) SetType(v string) *FacetAttributeDefinition
- func (s FacetAttributeDefinition) String() string
- func (s *FacetAttributeDefinition) Validate() error
- type FacetAttributeReference
- func (s FacetAttributeReference) GoString() string
- func (s *FacetAttributeReference) SetTargetAttributeName(v string) *FacetAttributeReference
- func (s *FacetAttributeReference) SetTargetFacetName(v string) *FacetAttributeReference
- func (s FacetAttributeReference) String() string
- func (s *FacetAttributeReference) Validate() error
- type FacetAttributeUpdate
- type GetDirectoryInput
- type GetDirectoryOutput
- type GetFacetInput
- type GetFacetOutput
- type GetObjectInformationInput
- func (s GetObjectInformationInput) GoString() string
- func (s *GetObjectInformationInput) SetConsistencyLevel(v string) *GetObjectInformationInput
- func (s *GetObjectInformationInput) SetDirectoryArn(v string) *GetObjectInformationInput
- func (s *GetObjectInformationInput) SetObjectReference(v *ObjectReference) *GetObjectInformationInput
- func (s GetObjectInformationInput) String() string
- func (s *GetObjectInformationInput) Validate() error
- type GetObjectInformationOutput
- type GetSchemaAsJsonInput
- type GetSchemaAsJsonOutput
- type IndexAttachment
- type ListAppliedSchemaArnsInput
- func (s ListAppliedSchemaArnsInput) GoString() string
- func (s *ListAppliedSchemaArnsInput) SetDirectoryArn(v string) *ListAppliedSchemaArnsInput
- func (s *ListAppliedSchemaArnsInput) SetMaxResults(v int64) *ListAppliedSchemaArnsInput
- func (s *ListAppliedSchemaArnsInput) SetNextToken(v string) *ListAppliedSchemaArnsInput
- func (s ListAppliedSchemaArnsInput) String() string
- func (s *ListAppliedSchemaArnsInput) Validate() error
- type ListAppliedSchemaArnsOutput
- type ListAttachedIndicesInput
- func (s ListAttachedIndicesInput) GoString() string
- func (s *ListAttachedIndicesInput) SetConsistencyLevel(v string) *ListAttachedIndicesInput
- func (s *ListAttachedIndicesInput) SetDirectoryArn(v string) *ListAttachedIndicesInput
- func (s *ListAttachedIndicesInput) SetMaxResults(v int64) *ListAttachedIndicesInput
- func (s *ListAttachedIndicesInput) SetNextToken(v string) *ListAttachedIndicesInput
- func (s *ListAttachedIndicesInput) SetTargetReference(v *ObjectReference) *ListAttachedIndicesInput
- func (s ListAttachedIndicesInput) String() string
- func (s *ListAttachedIndicesInput) Validate() error
- type ListAttachedIndicesOutput
- type ListDevelopmentSchemaArnsInput
- func (s ListDevelopmentSchemaArnsInput) GoString() string
- func (s *ListDevelopmentSchemaArnsInput) SetMaxResults(v int64) *ListDevelopmentSchemaArnsInput
- func (s *ListDevelopmentSchemaArnsInput) SetNextToken(v string) *ListDevelopmentSchemaArnsInput
- func (s ListDevelopmentSchemaArnsInput) String() string
- func (s *ListDevelopmentSchemaArnsInput) Validate() error
- type ListDevelopmentSchemaArnsOutput
- func (s ListDevelopmentSchemaArnsOutput) GoString() string
- func (s *ListDevelopmentSchemaArnsOutput) SetNextToken(v string) *ListDevelopmentSchemaArnsOutput
- func (s *ListDevelopmentSchemaArnsOutput) SetSchemaArns(v []*string) *ListDevelopmentSchemaArnsOutput
- func (s ListDevelopmentSchemaArnsOutput) String() string
- type ListDirectoriesInput
- func (s ListDirectoriesInput) GoString() string
- func (s *ListDirectoriesInput) SetMaxResults(v int64) *ListDirectoriesInput
- func (s *ListDirectoriesInput) SetNextToken(v string) *ListDirectoriesInput
- func (s *ListDirectoriesInput) SetState(v string) *ListDirectoriesInput
- func (s ListDirectoriesInput) String() string
- func (s *ListDirectoriesInput) Validate() error
- type ListDirectoriesOutput
- type ListFacetAttributesInput
- func (s ListFacetAttributesInput) GoString() string
- func (s *ListFacetAttributesInput) SetMaxResults(v int64) *ListFacetAttributesInput
- func (s *ListFacetAttributesInput) SetName(v string) *ListFacetAttributesInput
- func (s *ListFacetAttributesInput) SetNextToken(v string) *ListFacetAttributesInput
- func (s *ListFacetAttributesInput) SetSchemaArn(v string) *ListFacetAttributesInput
- func (s ListFacetAttributesInput) String() string
- func (s *ListFacetAttributesInput) Validate() error
- type ListFacetAttributesOutput
- type ListFacetNamesInput
- func (s ListFacetNamesInput) GoString() string
- func (s *ListFacetNamesInput) SetMaxResults(v int64) *ListFacetNamesInput
- func (s *ListFacetNamesInput) SetNextToken(v string) *ListFacetNamesInput
- func (s *ListFacetNamesInput) SetSchemaArn(v string) *ListFacetNamesInput
- func (s ListFacetNamesInput) String() string
- func (s *ListFacetNamesInput) Validate() error
- type ListFacetNamesOutput
- type ListIndexInput
- func (s ListIndexInput) GoString() string
- func (s *ListIndexInput) SetConsistencyLevel(v string) *ListIndexInput
- func (s *ListIndexInput) SetDirectoryArn(v string) *ListIndexInput
- func (s *ListIndexInput) SetIndexReference(v *ObjectReference) *ListIndexInput
- func (s *ListIndexInput) SetMaxResults(v int64) *ListIndexInput
- func (s *ListIndexInput) SetNextToken(v string) *ListIndexInput
- func (s *ListIndexInput) SetRangesOnIndexedValues(v []*ObjectAttributeRange) *ListIndexInput
- func (s ListIndexInput) String() string
- func (s *ListIndexInput) Validate() error
- type ListIndexOutput
- type ListObjectAttributesInput
- func (s ListObjectAttributesInput) GoString() string
- func (s *ListObjectAttributesInput) SetConsistencyLevel(v string) *ListObjectAttributesInput
- func (s *ListObjectAttributesInput) SetDirectoryArn(v string) *ListObjectAttributesInput
- func (s *ListObjectAttributesInput) SetMaxResults(v int64) *ListObjectAttributesInput
- func (s *ListObjectAttributesInput) SetNextToken(v string) *ListObjectAttributesInput
- func (s *ListObjectAttributesInput) SetObjectReference(v *ObjectReference) *ListObjectAttributesInput
- func (s ListObjectAttributesInput) String() string
- func (s *ListObjectAttributesInput) Validate() error
- type ListObjectAttributesOutput
- type ListObjectChildrenInput
- func (s ListObjectChildrenInput) GoString() string
- func (s *ListObjectChildrenInput) SetConsistencyLevel(v string) *ListObjectChildrenInput
- func (s *ListObjectChildrenInput) SetDirectoryArn(v string) *ListObjectChildrenInput
- func (s *ListObjectChildrenInput) SetMaxResults(v int64) *ListObjectChildrenInput
- func (s *ListObjectChildrenInput) SetNextToken(v string) *ListObjectChildrenInput
- func (s *ListObjectChildrenInput) SetObjectReference(v *ObjectReference) *ListObjectChildrenInput
- func (s ListObjectChildrenInput) String() string
- func (s *ListObjectChildrenInput) Validate() error
- type ListObjectChildrenOutput
- type ListObjectParentPathsInput
- func (s ListObjectParentPathsInput) GoString() string
- func (s *ListObjectParentPathsInput) SetDirectoryArn(v string) *ListObjectParentPathsInput
- func (s *ListObjectParentPathsInput) SetMaxResults(v int64) *ListObjectParentPathsInput
- func (s *ListObjectParentPathsInput) SetNextToken(v string) *ListObjectParentPathsInput
- func (s *ListObjectParentPathsInput) SetObjectReference(v *ObjectReference) *ListObjectParentPathsInput
- func (s ListObjectParentPathsInput) String() string
- func (s *ListObjectParentPathsInput) Validate() error
- type ListObjectParentPathsOutput
- func (s ListObjectParentPathsOutput) GoString() string
- func (s *ListObjectParentPathsOutput) SetNextToken(v string) *ListObjectParentPathsOutput
- func (s *ListObjectParentPathsOutput) SetPathToObjectIdentifiersList(v []*PathToObjectIdentifiers) *ListObjectParentPathsOutput
- func (s ListObjectParentPathsOutput) String() string
- type ListObjectParentsInput
- func (s ListObjectParentsInput) GoString() string
- func (s *ListObjectParentsInput) SetConsistencyLevel(v string) *ListObjectParentsInput
- func (s *ListObjectParentsInput) SetDirectoryArn(v string) *ListObjectParentsInput
- func (s *ListObjectParentsInput) SetMaxResults(v int64) *ListObjectParentsInput
- func (s *ListObjectParentsInput) SetNextToken(v string) *ListObjectParentsInput
- func (s *ListObjectParentsInput) SetObjectReference(v *ObjectReference) *ListObjectParentsInput
- func (s ListObjectParentsInput) String() string
- func (s *ListObjectParentsInput) Validate() error
- type ListObjectParentsOutput
- type ListObjectPoliciesInput
- func (s ListObjectPoliciesInput) GoString() string
- func (s *ListObjectPoliciesInput) SetConsistencyLevel(v string) *ListObjectPoliciesInput
- func (s *ListObjectPoliciesInput) SetDirectoryArn(v string) *ListObjectPoliciesInput
- func (s *ListObjectPoliciesInput) SetMaxResults(v int64) *ListObjectPoliciesInput
- func (s *ListObjectPoliciesInput) SetNextToken(v string) *ListObjectPoliciesInput
- func (s *ListObjectPoliciesInput) SetObjectReference(v *ObjectReference) *ListObjectPoliciesInput
- func (s ListObjectPoliciesInput) String() string
- func (s *ListObjectPoliciesInput) Validate() error
- type ListObjectPoliciesOutput
- type ListPolicyAttachmentsInput
- func (s ListPolicyAttachmentsInput) GoString() string
- func (s *ListPolicyAttachmentsInput) SetConsistencyLevel(v string) *ListPolicyAttachmentsInput
- func (s *ListPolicyAttachmentsInput) SetDirectoryArn(v string) *ListPolicyAttachmentsInput
- func (s *ListPolicyAttachmentsInput) SetMaxResults(v int64) *ListPolicyAttachmentsInput
- func (s *ListPolicyAttachmentsInput) SetNextToken(v string) *ListPolicyAttachmentsInput
- func (s *ListPolicyAttachmentsInput) SetPolicyReference(v *ObjectReference) *ListPolicyAttachmentsInput
- func (s ListPolicyAttachmentsInput) String() string
- func (s *ListPolicyAttachmentsInput) Validate() error
- type ListPolicyAttachmentsOutput
- type ListPublishedSchemaArnsInput
- func (s ListPublishedSchemaArnsInput) GoString() string
- func (s *ListPublishedSchemaArnsInput) SetMaxResults(v int64) *ListPublishedSchemaArnsInput
- func (s *ListPublishedSchemaArnsInput) SetNextToken(v string) *ListPublishedSchemaArnsInput
- func (s ListPublishedSchemaArnsInput) String() string
- func (s *ListPublishedSchemaArnsInput) Validate() error
- type ListPublishedSchemaArnsOutput
- func (s ListPublishedSchemaArnsOutput) GoString() string
- func (s *ListPublishedSchemaArnsOutput) SetNextToken(v string) *ListPublishedSchemaArnsOutput
- func (s *ListPublishedSchemaArnsOutput) SetSchemaArns(v []*string) *ListPublishedSchemaArnsOutput
- func (s ListPublishedSchemaArnsOutput) String() string
- type ListTagsForResourceInput
- func (s ListTagsForResourceInput) GoString() string
- func (s *ListTagsForResourceInput) SetMaxResults(v int64) *ListTagsForResourceInput
- func (s *ListTagsForResourceInput) SetNextToken(v string) *ListTagsForResourceInput
- func (s *ListTagsForResourceInput) SetResourceArn(v string) *ListTagsForResourceInput
- func (s ListTagsForResourceInput) String() string
- func (s *ListTagsForResourceInput) Validate() error
- type ListTagsForResourceOutput
- type LookupPolicyInput
- func (s LookupPolicyInput) GoString() string
- func (s *LookupPolicyInput) SetDirectoryArn(v string) *LookupPolicyInput
- func (s *LookupPolicyInput) SetMaxResults(v int64) *LookupPolicyInput
- func (s *LookupPolicyInput) SetNextToken(v string) *LookupPolicyInput
- func (s *LookupPolicyInput) SetObjectReference(v *ObjectReference) *LookupPolicyInput
- func (s LookupPolicyInput) String() string
- func (s *LookupPolicyInput) Validate() error
- type LookupPolicyOutput
- type ObjectAttributeAction
- type ObjectAttributeRange
- func (s ObjectAttributeRange) GoString() string
- func (s *ObjectAttributeRange) SetAttributeKey(v *AttributeKey) *ObjectAttributeRange
- func (s *ObjectAttributeRange) SetRange(v *TypedAttributeValueRange) *ObjectAttributeRange
- func (s ObjectAttributeRange) String() string
- func (s *ObjectAttributeRange) Validate() error
- type ObjectAttributeUpdate
- func (s ObjectAttributeUpdate) GoString() string
- func (s *ObjectAttributeUpdate) SetObjectAttributeAction(v *ObjectAttributeAction) *ObjectAttributeUpdate
- func (s *ObjectAttributeUpdate) SetObjectAttributeKey(v *AttributeKey) *ObjectAttributeUpdate
- func (s ObjectAttributeUpdate) String() string
- func (s *ObjectAttributeUpdate) Validate() error
- type ObjectReference
- type PathToObjectIdentifiers
- type PolicyAttachment
- type PolicyToPath
- type PublishSchemaInput
- func (s PublishSchemaInput) GoString() string
- func (s *PublishSchemaInput) SetDevelopmentSchemaArn(v string) *PublishSchemaInput
- func (s *PublishSchemaInput) SetName(v string) *PublishSchemaInput
- func (s *PublishSchemaInput) SetVersion(v string) *PublishSchemaInput
- func (s PublishSchemaInput) String() string
- func (s *PublishSchemaInput) Validate() error
- type PublishSchemaOutput
- type PutSchemaFromJsonInput
- func (s PutSchemaFromJsonInput) GoString() string
- func (s *PutSchemaFromJsonInput) SetDocument(v string) *PutSchemaFromJsonInput
- func (s *PutSchemaFromJsonInput) SetSchemaArn(v string) *PutSchemaFromJsonInput
- func (s PutSchemaFromJsonInput) String() string
- func (s *PutSchemaFromJsonInput) Validate() error
- type PutSchemaFromJsonOutput
- type RemoveFacetFromObjectInput
- func (s RemoveFacetFromObjectInput) GoString() string
- func (s *RemoveFacetFromObjectInput) SetDirectoryArn(v string) *RemoveFacetFromObjectInput
- func (s *RemoveFacetFromObjectInput) SetObjectReference(v *ObjectReference) *RemoveFacetFromObjectInput
- func (s *RemoveFacetFromObjectInput) SetSchemaFacet(v *SchemaFacet) *RemoveFacetFromObjectInput
- func (s RemoveFacetFromObjectInput) String() string
- func (s *RemoveFacetFromObjectInput) Validate() error
- type RemoveFacetFromObjectOutput
- type Rule
- type SchemaFacet
- type Tag
- type TagResourceInput
- type TagResourceOutput
- type TypedAttributeValue
- func (s TypedAttributeValue) GoString() string
- func (s *TypedAttributeValue) SetBinaryValue(v []byte) *TypedAttributeValue
- func (s *TypedAttributeValue) SetBooleanValue(v bool) *TypedAttributeValue
- func (s *TypedAttributeValue) SetDatetimeValue(v time.Time) *TypedAttributeValue
- func (s *TypedAttributeValue) SetNumberValue(v string) *TypedAttributeValue
- func (s *TypedAttributeValue) SetStringValue(v string) *TypedAttributeValue
- func (s TypedAttributeValue) String() string
- type TypedAttributeValueRange
- func (s TypedAttributeValueRange) GoString() string
- func (s *TypedAttributeValueRange) SetEndMode(v string) *TypedAttributeValueRange
- func (s *TypedAttributeValueRange) SetEndValue(v *TypedAttributeValue) *TypedAttributeValueRange
- func (s *TypedAttributeValueRange) SetStartMode(v string) *TypedAttributeValueRange
- func (s *TypedAttributeValueRange) SetStartValue(v *TypedAttributeValue) *TypedAttributeValueRange
- func (s TypedAttributeValueRange) String() string
- func (s *TypedAttributeValueRange) Validate() error
- type UntagResourceInput
- type UntagResourceOutput
- type UpdateFacetInput
- func (s UpdateFacetInput) GoString() string
- func (s *UpdateFacetInput) SetAttributeUpdates(v []*FacetAttributeUpdate) *UpdateFacetInput
- func (s *UpdateFacetInput) SetName(v string) *UpdateFacetInput
- func (s *UpdateFacetInput) SetObjectType(v string) *UpdateFacetInput
- func (s *UpdateFacetInput) SetSchemaArn(v string) *UpdateFacetInput
- func (s UpdateFacetInput) String() string
- func (s *UpdateFacetInput) Validate() error
- type UpdateFacetOutput
- type UpdateObjectAttributesInput
- func (s UpdateObjectAttributesInput) GoString() string
- func (s *UpdateObjectAttributesInput) SetAttributeUpdates(v []*ObjectAttributeUpdate) *UpdateObjectAttributesInput
- func (s *UpdateObjectAttributesInput) SetDirectoryArn(v string) *UpdateObjectAttributesInput
- func (s *UpdateObjectAttributesInput) SetObjectReference(v *ObjectReference) *UpdateObjectAttributesInput
- func (s UpdateObjectAttributesInput) String() string
- func (s *UpdateObjectAttributesInput) Validate() error
- type UpdateObjectAttributesOutput
- type UpdateSchemaInput
- type UpdateSchemaOutput
Examples ¶
- CloudDirectory.AddFacetToObject
- CloudDirectory.ApplySchema
- CloudDirectory.AttachObject
- CloudDirectory.AttachPolicy
- CloudDirectory.AttachToIndex
- CloudDirectory.BatchRead
- CloudDirectory.BatchWrite
- CloudDirectory.CreateDirectory
- CloudDirectory.CreateFacet
- CloudDirectory.CreateIndex
- CloudDirectory.CreateObject
- CloudDirectory.CreateSchema
- CloudDirectory.DeleteDirectory
- CloudDirectory.DeleteFacet
- CloudDirectory.DeleteObject
- CloudDirectory.DeleteSchema
- CloudDirectory.DetachFromIndex
- CloudDirectory.DetachObject
- CloudDirectory.DetachPolicy
- CloudDirectory.DisableDirectory
- CloudDirectory.EnableDirectory
- CloudDirectory.GetDirectory
- CloudDirectory.GetFacet
- CloudDirectory.GetObjectInformation
- CloudDirectory.GetSchemaAsJson
- CloudDirectory.ListAppliedSchemaArns
- CloudDirectory.ListAttachedIndices
- CloudDirectory.ListDevelopmentSchemaArns
- CloudDirectory.ListDirectories
- CloudDirectory.ListFacetAttributes
- CloudDirectory.ListFacetNames
- CloudDirectory.ListIndex
- CloudDirectory.ListObjectAttributes
- CloudDirectory.ListObjectChildren
- CloudDirectory.ListObjectParentPaths
- CloudDirectory.ListObjectParents
- CloudDirectory.ListObjectPolicies
- CloudDirectory.ListPolicyAttachments
- CloudDirectory.ListPublishedSchemaArns
- CloudDirectory.ListTagsForResource
- CloudDirectory.LookupPolicy
- CloudDirectory.PublishSchema
- CloudDirectory.PutSchemaFromJson
- CloudDirectory.RemoveFacetFromObject
- CloudDirectory.TagResource
- CloudDirectory.UntagResource
- CloudDirectory.UpdateFacet
- CloudDirectory.UpdateObjectAttributes
- CloudDirectory.UpdateSchema
Constants ¶
const ( // BatchReadExceptionTypeValidationException is a BatchReadExceptionType enum value BatchReadExceptionTypeValidationException = "ValidationException" // BatchReadExceptionTypeInvalidArnException is a BatchReadExceptionType enum value BatchReadExceptionTypeInvalidArnException = "InvalidArnException" // BatchReadExceptionTypeResourceNotFoundException is a BatchReadExceptionType enum value BatchReadExceptionTypeResourceNotFoundException = "ResourceNotFoundException" // BatchReadExceptionTypeInvalidNextTokenException is a BatchReadExceptionType enum value BatchReadExceptionTypeInvalidNextTokenException = "InvalidNextTokenException" // BatchReadExceptionTypeAccessDeniedException is a BatchReadExceptionType enum value BatchReadExceptionTypeAccessDeniedException = "AccessDeniedException" // BatchReadExceptionTypeNotNodeException is a BatchReadExceptionType enum value BatchReadExceptionTypeNotNodeException = "NotNodeException" )
const ( // BatchWriteExceptionTypeInternalServiceException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeInternalServiceException = "InternalServiceException" // BatchWriteExceptionTypeValidationException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeValidationException = "ValidationException" // BatchWriteExceptionTypeInvalidArnException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeInvalidArnException = "InvalidArnException" // BatchWriteExceptionTypeLinkNameAlreadyInUseException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeLinkNameAlreadyInUseException = "LinkNameAlreadyInUseException" // BatchWriteExceptionTypeStillContainsLinksException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeStillContainsLinksException = "StillContainsLinksException" // BatchWriteExceptionTypeFacetValidationException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeFacetValidationException = "FacetValidationException" // BatchWriteExceptionTypeObjectNotDetachedException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeObjectNotDetachedException = "ObjectNotDetachedException" // BatchWriteExceptionTypeResourceNotFoundException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeResourceNotFoundException = "ResourceNotFoundException" // BatchWriteExceptionTypeAccessDeniedException is a BatchWriteExceptionType enum value BatchWriteExceptionTypeAccessDeniedException = "AccessDeniedException" )
const ( // ConsistencyLevelSerializable is a ConsistencyLevel enum value ConsistencyLevelSerializable = "SERIALIZABLE" // ConsistencyLevelEventual is a ConsistencyLevel enum value ConsistencyLevelEventual = "EVENTUAL" )
const ( // DirectoryStateEnabled is a DirectoryState enum value DirectoryStateEnabled = "ENABLED" // DirectoryStateDisabled is a DirectoryState enum value DirectoryStateDisabled = "DISABLED" // DirectoryStateDeleted is a DirectoryState enum value DirectoryStateDeleted = "DELETED" )
const ( // FacetAttributeTypeString is a FacetAttributeType enum value FacetAttributeTypeString = "STRING" // FacetAttributeTypeBinary is a FacetAttributeType enum value FacetAttributeTypeBinary = "BINARY" // FacetAttributeTypeBoolean is a FacetAttributeType enum value FacetAttributeTypeBoolean = "BOOLEAN" // FacetAttributeTypeNumber is a FacetAttributeType enum value FacetAttributeTypeNumber = "NUMBER" // FacetAttributeTypeDatetime is a FacetAttributeType enum value FacetAttributeTypeDatetime = "DATETIME" )
const ( // ObjectTypeNode is a ObjectType enum value ObjectTypeNode = "NODE" // ObjectTypeLeafNode is a ObjectType enum value ObjectTypeLeafNode = "LEAF_NODE" // ObjectTypePolicy is a ObjectType enum value ObjectTypePolicy = "POLICY" // ObjectTypeIndex is a ObjectType enum value ObjectTypeIndex = "INDEX" )
const ( // RangeModeFirst is a RangeMode enum value RangeModeFirst = "FIRST" // RangeModeLast is a RangeMode enum value RangeModeLast = "LAST" // RangeModeLastBeforeMissingValues is a RangeMode enum value RangeModeLastBeforeMissingValues = "LAST_BEFORE_MISSING_VALUES" // RangeModeInclusive is a RangeMode enum value RangeModeInclusive = "INCLUSIVE" // RangeModeExclusive is a RangeMode enum value RangeModeExclusive = "EXCLUSIVE" )
const ( // RequiredAttributeBehaviorRequiredAlways is a RequiredAttributeBehavior enum value RequiredAttributeBehaviorRequiredAlways = "REQUIRED_ALWAYS" // RequiredAttributeBehaviorNotRequired is a RequiredAttributeBehavior enum value RequiredAttributeBehaviorNotRequired = "NOT_REQUIRED" )
const ( // RuleTypeBinaryLength is a RuleType enum value RuleTypeBinaryLength = "BINARY_LENGTH" // RuleTypeNumberComparison is a RuleType enum value RuleTypeNumberComparison = "NUMBER_COMPARISON" // RuleTypeStringFromSet is a RuleType enum value RuleTypeStringFromSet = "STRING_FROM_SET" // RuleTypeStringLength is a RuleType enum value RuleTypeStringLength = "STRING_LENGTH" )
const ( // UpdateActionTypeCreateOrUpdate is a UpdateActionType enum value UpdateActionTypeCreateOrUpdate = "CREATE_OR_UPDATE" // UpdateActionTypeDelete is a UpdateActionType enum value UpdateActionTypeDelete = "DELETE" )
const ( // ErrCodeAccessDeniedException for service response error code // "AccessDeniedException". // // Access denied. Check your permissions. ErrCodeAccessDeniedException = "AccessDeniedException" // ErrCodeBatchWriteException for service response error code // "BatchWriteException". // // A BatchWrite exception has occurred. ErrCodeBatchWriteException = "BatchWriteException" // ErrCodeCannotListParentOfRootException for service response error code // "CannotListParentOfRootException". // // Cannot list the parents of a Directory root. ErrCodeCannotListParentOfRootException = "CannotListParentOfRootException" // ErrCodeDirectoryAlreadyExistsException for service response error code // "DirectoryAlreadyExistsException". // // Indicates that a Directory could not be created due to a naming conflict. // Choose a different name and try again. ErrCodeDirectoryAlreadyExistsException = "DirectoryAlreadyExistsException" // ErrCodeDirectoryDeletedException for service response error code // "DirectoryDeletedException". // // A directory that has been deleted has been attempted to be accessed. Note: // The requested resource will eventually cease to exist. ErrCodeDirectoryDeletedException = "DirectoryDeletedException" // ErrCodeDirectoryNotDisabledException for service response error code // "DirectoryNotDisabledException". // // An operation can only operate on a disabled directory. ErrCodeDirectoryNotDisabledException = "DirectoryNotDisabledException" // ErrCodeDirectoryNotEnabledException for service response error code // "DirectoryNotEnabledException". // // An operation can only operate on a directory that is not enabled. ErrCodeDirectoryNotEnabledException = "DirectoryNotEnabledException" // ErrCodeFacetAlreadyExistsException for service response error code // "FacetAlreadyExistsException". // // A facet with the same name already exists. ErrCodeFacetAlreadyExistsException = "FacetAlreadyExistsException" // ErrCodeFacetInUseException for service response error code // "FacetInUseException". // // Occurs when deleting a facet that contains an attribute which is a target // to an attribute reference in a different facet. ErrCodeFacetInUseException = "FacetInUseException" // ErrCodeFacetNotFoundException for service response error code // "FacetNotFoundException". // // The specified Facet could not be found. ErrCodeFacetNotFoundException = "FacetNotFoundException" // ErrCodeFacetValidationException for service response error code // "FacetValidationException". // // The Facet you provided was not well formed or could not be validated with // the schema. ErrCodeFacetValidationException = "FacetValidationException" // ErrCodeIndexedAttributeMissingException for service response error code // "IndexedAttributeMissingException". // // An object has been attempted to be attached to an object that does not have // the appropriate attribute value. ErrCodeIndexedAttributeMissingException = "IndexedAttributeMissingException" // ErrCodeInternalServiceException for service response error code // "InternalServiceException". // // Indicates a problem that must be resolved by Amazon Web Services. This might // be a transient error in which case you can retry your request until it succeeds. // Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) // site to see if there are any operational issues with the service. ErrCodeInternalServiceException = "InternalServiceException" // ErrCodeInvalidArnException for service response error code // "InvalidArnException". // // Indicates that the provided ARN value is not valid. ErrCodeInvalidArnException = "InvalidArnException" // ErrCodeInvalidAttachmentException for service response error code // "InvalidAttachmentException". // // Indicates that an attempt to attach an object with the same link name or // to apply a schema with same name has occurred. Rename the link or the schema // and then try again. ErrCodeInvalidAttachmentException = "InvalidAttachmentException" // ErrCodeInvalidFacetUpdateException for service response error code // "InvalidFacetUpdateException". // // An attempt to modify a Facet resulted in an invalid schema exception. ErrCodeInvalidFacetUpdateException = "InvalidFacetUpdateException" // ErrCodeInvalidNextTokenException for service response error code // "InvalidNextTokenException". // // Indicates that the NextToken value is not valid. ErrCodeInvalidNextTokenException = "InvalidNextTokenException" // ErrCodeInvalidRuleException for service response error code // "InvalidRuleException". // // Occurs when any of the rule parameter keys or values are invalid. ErrCodeInvalidRuleException = "InvalidRuleException" // ErrCodeInvalidSchemaDocException for service response error code // "InvalidSchemaDocException". // // Indicates that the provided SchemaDoc value is not valid. ErrCodeInvalidSchemaDocException = "InvalidSchemaDocException" // ErrCodeInvalidTaggingRequestException for service response error code // "InvalidTaggingRequestException". // // Can occur for multiple reasons such as when you tag a resource that doesn’t // exist or if you specify a higher number of tags for a resource than the allowed // limit. Allowed limit is 50 tags per resource. ErrCodeInvalidTaggingRequestException = "InvalidTaggingRequestException" // ErrCodeLimitExceededException for service response error code // "LimitExceededException". // // Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) // for more information. ErrCodeLimitExceededException = "LimitExceededException" // ErrCodeLinkNameAlreadyInUseException for service response error code // "LinkNameAlreadyInUseException". // // Indicates that a link could not be created due to a naming conflict. Choose // a different name and then try again. ErrCodeLinkNameAlreadyInUseException = "LinkNameAlreadyInUseException" // ErrCodeNotIndexException for service response error code // "NotIndexException". // // Indicates the requested operation can only operate on index objects. ErrCodeNotIndexException = "NotIndexException" // ErrCodeNotNodeException for service response error code // "NotNodeException". // // Occurs when any invalid operations are performed on an object which is not // a node, such as calling ListObjectChildren for a leaf node object. ErrCodeNotNodeException = "NotNodeException" // ErrCodeNotPolicyException for service response error code // "NotPolicyException". // // Indicates the requested operation can only operate on policy objects. ErrCodeNotPolicyException = "NotPolicyException" // ErrCodeObjectAlreadyDetachedException for service response error code // "ObjectAlreadyDetachedException". // // Indicates the object is not attached to the index. ErrCodeObjectAlreadyDetachedException = "ObjectAlreadyDetachedException" // ErrCodeObjectNotDetachedException for service response error code // "ObjectNotDetachedException". // // Indicates the requested operation cannot be completed because the object // has not been detached from the tree. ErrCodeObjectNotDetachedException = "ObjectNotDetachedException" // ErrCodeResourceNotFoundException for service response error code // "ResourceNotFoundException". // // The specified resource could not be found. ErrCodeResourceNotFoundException = "ResourceNotFoundException" // ErrCodeRetryableConflictException for service response error code // "RetryableConflictException". // // Occurs when a conflict with a previous successful write is detected. For // example, if a write operation occurs on an object and then an attempt is // made to read the object using “SERIALIZABLE” consistency, this exception // may result. This generally occurs when the previous write did not have time // to propagate to the host serving the current request. A retry (with appropriate // backoff logic) is the recommended response to this exception. ErrCodeRetryableConflictException = "RetryableConflictException" // ErrCodeSchemaAlreadyExistsException for service response error code // "SchemaAlreadyExistsException". // // Indicates that a schema could not be created due to a naming conflict. Please // select a different name and then try again. ErrCodeSchemaAlreadyExistsException = "SchemaAlreadyExistsException" // ErrCodeSchemaAlreadyPublishedException for service response error code // "SchemaAlreadyPublishedException". // // Indicates a schema is already published. ErrCodeSchemaAlreadyPublishedException = "SchemaAlreadyPublishedException" // ErrCodeStillContainsLinksException for service response error code // "StillContainsLinksException". // // The object could not be deleted because links still exist. Remove the links // and then try the operation again. ErrCodeStillContainsLinksException = "StillContainsLinksException" // ErrCodeUnsupportedIndexTypeException for service response error code // "UnsupportedIndexTypeException". // // Indicates the requested index type is not supported. ErrCodeUnsupportedIndexTypeException = "UnsupportedIndexTypeException" // ErrCodeValidationException for service response error code // "ValidationException". // // Indicates your request is malformed in some manner. See the exception message. ErrCodeValidationException = "ValidationException" )
const ( ServiceName = "clouddirectory" // Service endpoint prefix API calls made to. EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata. )
Service information constants
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type AddFacetToObjectInput ¶
type AddFacetToObjectInput struct { // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Attributes on the facet you are adding to the object. ObjectAttributeList []*AttributeKeyAndValue `type:"list"` // A reference to the object you are adding the specified facet to. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // Identifiers for the facet that you are adding to the object. // // SchemaFacet is a required field SchemaFacet *SchemaFacet `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AddFacetToObjectRequest
func (AddFacetToObjectInput) GoString ¶
func (s AddFacetToObjectInput) GoString() string
GoString returns the string representation
func (*AddFacetToObjectInput) SetDirectoryArn ¶
func (s *AddFacetToObjectInput) SetDirectoryArn(v string) *AddFacetToObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*AddFacetToObjectInput) SetObjectAttributeList ¶
func (s *AddFacetToObjectInput) SetObjectAttributeList(v []*AttributeKeyAndValue) *AddFacetToObjectInput
SetObjectAttributeList sets the ObjectAttributeList field's value.
func (*AddFacetToObjectInput) SetObjectReference ¶
func (s *AddFacetToObjectInput) SetObjectReference(v *ObjectReference) *AddFacetToObjectInput
SetObjectReference sets the ObjectReference field's value.
func (*AddFacetToObjectInput) SetSchemaFacet ¶
func (s *AddFacetToObjectInput) SetSchemaFacet(v *SchemaFacet) *AddFacetToObjectInput
SetSchemaFacet sets the SchemaFacet field's value.
func (AddFacetToObjectInput) String ¶
func (s AddFacetToObjectInput) String() string
String returns the string representation
func (*AddFacetToObjectInput) Validate ¶
func (s *AddFacetToObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AddFacetToObjectOutput ¶
type AddFacetToObjectOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AddFacetToObjectResponse
func (AddFacetToObjectOutput) GoString ¶
func (s AddFacetToObjectOutput) GoString() string
GoString returns the string representation
func (AddFacetToObjectOutput) String ¶
func (s AddFacetToObjectOutput) String() string
String returns the string representation
type ApplySchemaInput ¶
type ApplySchemaInput struct { // ARN associated with the Directory into which the schema is copied. For more // information, see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Published schema ARN that needs to be copied. For more information, see arns. // // PublishedSchemaArn is a required field PublishedSchemaArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ApplySchemaRequest
func (ApplySchemaInput) GoString ¶
func (s ApplySchemaInput) GoString() string
GoString returns the string representation
func (*ApplySchemaInput) SetDirectoryArn ¶
func (s *ApplySchemaInput) SetDirectoryArn(v string) *ApplySchemaInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ApplySchemaInput) SetPublishedSchemaArn ¶
func (s *ApplySchemaInput) SetPublishedSchemaArn(v string) *ApplySchemaInput
SetPublishedSchemaArn sets the PublishedSchemaArn field's value.
func (ApplySchemaInput) String ¶
func (s ApplySchemaInput) String() string
String returns the string representation
func (*ApplySchemaInput) Validate ¶
func (s *ApplySchemaInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ApplySchemaOutput ¶
type ApplySchemaOutput struct { // Applied schema ARN associated with the copied schema in the Directory. You // can use this ARN to describe the schema information applied on this directory. // For more information, see arns. AppliedSchemaArn *string `type:"string"` // ARN associated with the Directory. For more information, see arns. DirectoryArn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ApplySchemaResponse
func (ApplySchemaOutput) GoString ¶
func (s ApplySchemaOutput) GoString() string
GoString returns the string representation
func (*ApplySchemaOutput) SetAppliedSchemaArn ¶
func (s *ApplySchemaOutput) SetAppliedSchemaArn(v string) *ApplySchemaOutput
SetAppliedSchemaArn sets the AppliedSchemaArn field's value.
func (*ApplySchemaOutput) SetDirectoryArn ¶
func (s *ApplySchemaOutput) SetDirectoryArn(v string) *ApplySchemaOutput
SetDirectoryArn sets the DirectoryArn field's value.
func (ApplySchemaOutput) String ¶
func (s ApplySchemaOutput) String() string
String returns the string representation
type AttachObjectInput ¶
type AttachObjectInput struct { // Child object reference to be attached to the object. // // ChildReference is a required field ChildReference *ObjectReference `type:"structure" required:"true"` // ARN associated with the Directory where both objects reside. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Link name with which the child object is attached to the parent. // // LinkName is a required field LinkName *string `type:"string" required:"true"` // Parent object reference. // // ParentReference is a required field ParentReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachObjectRequest
func (AttachObjectInput) GoString ¶
func (s AttachObjectInput) GoString() string
GoString returns the string representation
func (*AttachObjectInput) SetChildReference ¶
func (s *AttachObjectInput) SetChildReference(v *ObjectReference) *AttachObjectInput
SetChildReference sets the ChildReference field's value.
func (*AttachObjectInput) SetDirectoryArn ¶
func (s *AttachObjectInput) SetDirectoryArn(v string) *AttachObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*AttachObjectInput) SetLinkName ¶
func (s *AttachObjectInput) SetLinkName(v string) *AttachObjectInput
SetLinkName sets the LinkName field's value.
func (*AttachObjectInput) SetParentReference ¶
func (s *AttachObjectInput) SetParentReference(v *ObjectReference) *AttachObjectInput
SetParentReference sets the ParentReference field's value.
func (AttachObjectInput) String ¶
func (s AttachObjectInput) String() string
String returns the string representation
func (*AttachObjectInput) Validate ¶
func (s *AttachObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AttachObjectOutput ¶
type AttachObjectOutput struct { // Attached ObjectIdentifier, which is the child ObjectIdentifier. AttachedObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachObjectResponse
func (AttachObjectOutput) GoString ¶
func (s AttachObjectOutput) GoString() string
GoString returns the string representation
func (*AttachObjectOutput) SetAttachedObjectIdentifier ¶
func (s *AttachObjectOutput) SetAttachedObjectIdentifier(v string) *AttachObjectOutput
SetAttachedObjectIdentifier sets the AttachedObjectIdentifier field's value.
func (AttachObjectOutput) String ¶
func (s AttachObjectOutput) String() string
String returns the string representation
type AttachPolicyInput ¶
type AttachPolicyInput struct { // ARN associated with the Directory where both objects reside. For more information, // see arns. DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string"` // Reference that identifies the object to which the policy will be attached. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // Reference associated with the policy object. // // PolicyReference is a required field PolicyReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachPolicyRequest
func (AttachPolicyInput) GoString ¶
func (s AttachPolicyInput) GoString() string
GoString returns the string representation
func (*AttachPolicyInput) SetDirectoryArn ¶
func (s *AttachPolicyInput) SetDirectoryArn(v string) *AttachPolicyInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*AttachPolicyInput) SetObjectReference ¶
func (s *AttachPolicyInput) SetObjectReference(v *ObjectReference) *AttachPolicyInput
SetObjectReference sets the ObjectReference field's value.
func (*AttachPolicyInput) SetPolicyReference ¶
func (s *AttachPolicyInput) SetPolicyReference(v *ObjectReference) *AttachPolicyInput
SetPolicyReference sets the PolicyReference field's value.
func (AttachPolicyInput) String ¶
func (s AttachPolicyInput) String() string
String returns the string representation
func (*AttachPolicyInput) Validate ¶
func (s *AttachPolicyInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AttachPolicyOutput ¶
type AttachPolicyOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachPolicyResponse
func (AttachPolicyOutput) GoString ¶
func (s AttachPolicyOutput) GoString() string
GoString returns the string representation
func (AttachPolicyOutput) String ¶
func (s AttachPolicyOutput) String() string
String returns the string representation
type AttachToIndexInput ¶
type AttachToIndexInput struct { // The ARN of the directory where the object and index exist. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // A reference to the index that you are attaching the object to. // // IndexReference is a required field IndexReference *ObjectReference `type:"structure" required:"true"` // A reference to the object that you are attaching to the index. // // TargetReference is a required field TargetReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachToIndexRequest
func (AttachToIndexInput) GoString ¶
func (s AttachToIndexInput) GoString() string
GoString returns the string representation
func (*AttachToIndexInput) SetDirectoryArn ¶
func (s *AttachToIndexInput) SetDirectoryArn(v string) *AttachToIndexInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*AttachToIndexInput) SetIndexReference ¶
func (s *AttachToIndexInput) SetIndexReference(v *ObjectReference) *AttachToIndexInput
SetIndexReference sets the IndexReference field's value.
func (*AttachToIndexInput) SetTargetReference ¶
func (s *AttachToIndexInput) SetTargetReference(v *ObjectReference) *AttachToIndexInput
SetTargetReference sets the TargetReference field's value.
func (AttachToIndexInput) String ¶
func (s AttachToIndexInput) String() string
String returns the string representation
func (*AttachToIndexInput) Validate ¶
func (s *AttachToIndexInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AttachToIndexOutput ¶
type AttachToIndexOutput struct { // The ObjectIdentifier of the object that was attached to the index. AttachedObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachToIndexResponse
func (AttachToIndexOutput) GoString ¶
func (s AttachToIndexOutput) GoString() string
GoString returns the string representation
func (*AttachToIndexOutput) SetAttachedObjectIdentifier ¶
func (s *AttachToIndexOutput) SetAttachedObjectIdentifier(v string) *AttachToIndexOutput
SetAttachedObjectIdentifier sets the AttachedObjectIdentifier field's value.
func (AttachToIndexOutput) String ¶
func (s AttachToIndexOutput) String() string
String returns the string representation
type AttributeKey ¶
type AttributeKey struct { // The name of the facet the attribute exists within. // // FacetName is a required field FacetName *string `min:"1" type:"string" required:"true"` // The name of the attribute. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // The ARN of the schema that contains the facet and attribute. // // SchemaArn is a required field SchemaArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
A unique identifier for an attribute. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttributeKey
func (AttributeKey) GoString ¶
func (s AttributeKey) GoString() string
GoString returns the string representation
func (*AttributeKey) SetFacetName ¶
func (s *AttributeKey) SetFacetName(v string) *AttributeKey
SetFacetName sets the FacetName field's value.
func (*AttributeKey) SetName ¶
func (s *AttributeKey) SetName(v string) *AttributeKey
SetName sets the Name field's value.
func (*AttributeKey) SetSchemaArn ¶
func (s *AttributeKey) SetSchemaArn(v string) *AttributeKey
SetSchemaArn sets the SchemaArn field's value.
func (AttributeKey) String ¶
func (s AttributeKey) String() string
String returns the string representation
func (*AttributeKey) Validate ¶
func (s *AttributeKey) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AttributeKeyAndValue ¶
type AttributeKeyAndValue struct { // The key of the attribute. // // Key is a required field Key *AttributeKey `type:"structure" required:"true"` // The value of the attribute. // // Value is a required field Value *TypedAttributeValue `type:"structure" required:"true"` // contains filtered or unexported fields }
The combination of an attribute key and an attribute value. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttributeKeyAndValue
func (AttributeKeyAndValue) GoString ¶
func (s AttributeKeyAndValue) GoString() string
GoString returns the string representation
func (*AttributeKeyAndValue) SetKey ¶
func (s *AttributeKeyAndValue) SetKey(v *AttributeKey) *AttributeKeyAndValue
SetKey sets the Key field's value.
func (*AttributeKeyAndValue) SetValue ¶
func (s *AttributeKeyAndValue) SetValue(v *TypedAttributeValue) *AttributeKeyAndValue
SetValue sets the Value field's value.
func (AttributeKeyAndValue) String ¶
func (s AttributeKeyAndValue) String() string
String returns the string representation
func (*AttributeKeyAndValue) Validate ¶
func (s *AttributeKeyAndValue) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchAddFacetToObject ¶
type BatchAddFacetToObject struct { // The attributes to set on the object. // // ObjectAttributeList is a required field ObjectAttributeList []*AttributeKeyAndValue `type:"list" required:"true"` // A reference to the object being mutated. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // Represents the facet being added to the object. // // SchemaFacet is a required field SchemaFacet *SchemaFacet `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a batch add facet to object operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchAddFacetToObject
func (BatchAddFacetToObject) GoString ¶
func (s BatchAddFacetToObject) GoString() string
GoString returns the string representation
func (*BatchAddFacetToObject) SetObjectAttributeList ¶
func (s *BatchAddFacetToObject) SetObjectAttributeList(v []*AttributeKeyAndValue) *BatchAddFacetToObject
SetObjectAttributeList sets the ObjectAttributeList field's value.
func (*BatchAddFacetToObject) SetObjectReference ¶
func (s *BatchAddFacetToObject) SetObjectReference(v *ObjectReference) *BatchAddFacetToObject
SetObjectReference sets the ObjectReference field's value.
func (*BatchAddFacetToObject) SetSchemaFacet ¶
func (s *BatchAddFacetToObject) SetSchemaFacet(v *SchemaFacet) *BatchAddFacetToObject
SetSchemaFacet sets the SchemaFacet field's value.
func (BatchAddFacetToObject) String ¶
func (s BatchAddFacetToObject) String() string
String returns the string representation
func (*BatchAddFacetToObject) Validate ¶
func (s *BatchAddFacetToObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchAddFacetToObjectResponse ¶
type BatchAddFacetToObjectResponse struct {
// contains filtered or unexported fields
}
The result of a batch add facet to object operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchAddFacetToObjectResponse
func (BatchAddFacetToObjectResponse) GoString ¶
func (s BatchAddFacetToObjectResponse) GoString() string
GoString returns the string representation
func (BatchAddFacetToObjectResponse) String ¶
func (s BatchAddFacetToObjectResponse) String() string
String returns the string representation
type BatchAttachObject ¶
type BatchAttachObject struct { // Child object reference to be attached to the object. // // ChildReference is a required field ChildReference *ObjectReference `type:"structure" required:"true"` // The name of the link. // // LinkName is a required field LinkName *string `type:"string" required:"true"` // Parent object reference. // // ParentReference is a required field ParentReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of an AttachObject operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchAttachObject
func (BatchAttachObject) GoString ¶
func (s BatchAttachObject) GoString() string
GoString returns the string representation
func (*BatchAttachObject) SetChildReference ¶
func (s *BatchAttachObject) SetChildReference(v *ObjectReference) *BatchAttachObject
SetChildReference sets the ChildReference field's value.
func (*BatchAttachObject) SetLinkName ¶
func (s *BatchAttachObject) SetLinkName(v string) *BatchAttachObject
SetLinkName sets the LinkName field's value.
func (*BatchAttachObject) SetParentReference ¶
func (s *BatchAttachObject) SetParentReference(v *ObjectReference) *BatchAttachObject
SetParentReference sets the ParentReference field's value.
func (BatchAttachObject) String ¶
func (s BatchAttachObject) String() string
String returns the string representation
func (*BatchAttachObject) Validate ¶
func (s *BatchAttachObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchAttachObjectResponse ¶
type BatchAttachObjectResponse struct { // The ObjectIdentifier of the object that has been attached. AttachedObjectIdentifier *string `locationName:"attachedObjectIdentifier" type:"string"` // contains filtered or unexported fields }
Represents the output batch AttachObject response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchAttachObjectResponse
func (BatchAttachObjectResponse) GoString ¶
func (s BatchAttachObjectResponse) GoString() string
GoString returns the string representation
func (*BatchAttachObjectResponse) SetAttachedObjectIdentifier ¶
func (s *BatchAttachObjectResponse) SetAttachedObjectIdentifier(v string) *BatchAttachObjectResponse
SetAttachedObjectIdentifier sets the AttachedObjectIdentifier field's value.
func (BatchAttachObjectResponse) String ¶
func (s BatchAttachObjectResponse) String() string
String returns the string representation
type BatchCreateObject ¶
type BatchCreateObject struct { // The batch reference name. See Batches (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#batches) // for more information. // // BatchReferenceName is a required field BatchReferenceName *string `type:"string" required:"true"` // The name of the link. // // LinkName is a required field LinkName *string `type:"string" required:"true"` // Attribute map, which contains an attribute ARN as the key and attribute value // as the map value. // // ObjectAttributeList is a required field ObjectAttributeList []*AttributeKeyAndValue `type:"list" required:"true"` // If specified, the parent reference to which this object will be attached. // // ParentReference is a required field ParentReference *ObjectReference `type:"structure" required:"true"` // List of FacetArns that will be associated with the object. For more information, // see arns. // // SchemaFacet is a required field SchemaFacet []*SchemaFacet `type:"list" required:"true"` // contains filtered or unexported fields }
Represents the output of a CreateObject operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchCreateObject
func (BatchCreateObject) GoString ¶
func (s BatchCreateObject) GoString() string
GoString returns the string representation
func (*BatchCreateObject) SetBatchReferenceName ¶
func (s *BatchCreateObject) SetBatchReferenceName(v string) *BatchCreateObject
SetBatchReferenceName sets the BatchReferenceName field's value.
func (*BatchCreateObject) SetLinkName ¶
func (s *BatchCreateObject) SetLinkName(v string) *BatchCreateObject
SetLinkName sets the LinkName field's value.
func (*BatchCreateObject) SetObjectAttributeList ¶
func (s *BatchCreateObject) SetObjectAttributeList(v []*AttributeKeyAndValue) *BatchCreateObject
SetObjectAttributeList sets the ObjectAttributeList field's value.
func (*BatchCreateObject) SetParentReference ¶
func (s *BatchCreateObject) SetParentReference(v *ObjectReference) *BatchCreateObject
SetParentReference sets the ParentReference field's value.
func (*BatchCreateObject) SetSchemaFacet ¶
func (s *BatchCreateObject) SetSchemaFacet(v []*SchemaFacet) *BatchCreateObject
SetSchemaFacet sets the SchemaFacet field's value.
func (BatchCreateObject) String ¶
func (s BatchCreateObject) String() string
String returns the string representation
func (*BatchCreateObject) Validate ¶
func (s *BatchCreateObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchCreateObjectResponse ¶
type BatchCreateObjectResponse struct { // ID associated with the object. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Represents the output of a CreateObject response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchCreateObjectResponse
func (BatchCreateObjectResponse) GoString ¶
func (s BatchCreateObjectResponse) GoString() string
GoString returns the string representation
func (*BatchCreateObjectResponse) SetObjectIdentifier ¶
func (s *BatchCreateObjectResponse) SetObjectIdentifier(v string) *BatchCreateObjectResponse
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (BatchCreateObjectResponse) String ¶
func (s BatchCreateObjectResponse) String() string
String returns the string representation
type BatchDeleteObject ¶
type BatchDeleteObject struct { // Reference that identifies the object. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a DeleteObject operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchDeleteObject
func (BatchDeleteObject) GoString ¶
func (s BatchDeleteObject) GoString() string
GoString returns the string representation
func (*BatchDeleteObject) SetObjectReference ¶
func (s *BatchDeleteObject) SetObjectReference(v *ObjectReference) *BatchDeleteObject
SetObjectReference sets the ObjectReference field's value.
func (BatchDeleteObject) String ¶
func (s BatchDeleteObject) String() string
String returns the string representation
func (*BatchDeleteObject) Validate ¶
func (s *BatchDeleteObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchDeleteObjectResponse ¶
type BatchDeleteObjectResponse struct {
// contains filtered or unexported fields
}
Represents the output of a DeleteObject response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchDeleteObjectResponse
func (BatchDeleteObjectResponse) GoString ¶
func (s BatchDeleteObjectResponse) GoString() string
GoString returns the string representation
func (BatchDeleteObjectResponse) String ¶
func (s BatchDeleteObjectResponse) String() string
String returns the string representation
type BatchDetachObject ¶
type BatchDetachObject struct { // The batch reference name. See Batches (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#batches) // for more information. // // BatchReferenceName is a required field BatchReferenceName *string `type:"string" required:"true"` // The name of the link. // // LinkName is a required field LinkName *string `type:"string" required:"true"` // Parent reference from which the object with the specified link name is detached. // // ParentReference is a required field ParentReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a DetachObject operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchDetachObject
func (BatchDetachObject) GoString ¶
func (s BatchDetachObject) GoString() string
GoString returns the string representation
func (*BatchDetachObject) SetBatchReferenceName ¶
func (s *BatchDetachObject) SetBatchReferenceName(v string) *BatchDetachObject
SetBatchReferenceName sets the BatchReferenceName field's value.
func (*BatchDetachObject) SetLinkName ¶
func (s *BatchDetachObject) SetLinkName(v string) *BatchDetachObject
SetLinkName sets the LinkName field's value.
func (*BatchDetachObject) SetParentReference ¶
func (s *BatchDetachObject) SetParentReference(v *ObjectReference) *BatchDetachObject
SetParentReference sets the ParentReference field's value.
func (BatchDetachObject) String ¶
func (s BatchDetachObject) String() string
String returns the string representation
func (*BatchDetachObject) Validate ¶
func (s *BatchDetachObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchDetachObjectResponse ¶
type BatchDetachObjectResponse struct { // The ObjectIdentifier of the detached object. DetachedObjectIdentifier *string `locationName:"detachedObjectIdentifier" type:"string"` // contains filtered or unexported fields }
Represents the output of a DetachObject response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchDetachObjectResponse
func (BatchDetachObjectResponse) GoString ¶
func (s BatchDetachObjectResponse) GoString() string
GoString returns the string representation
func (*BatchDetachObjectResponse) SetDetachedObjectIdentifier ¶
func (s *BatchDetachObjectResponse) SetDetachedObjectIdentifier(v string) *BatchDetachObjectResponse
SetDetachedObjectIdentifier sets the DetachedObjectIdentifier field's value.
func (BatchDetachObjectResponse) String ¶
func (s BatchDetachObjectResponse) String() string
String returns the string representation
type BatchListObjectAttributes ¶
type BatchListObjectAttributes struct { // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference of the object whose attributes need to be listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a ListObjectAttributes operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchListObjectAttributes
func (BatchListObjectAttributes) GoString ¶
func (s BatchListObjectAttributes) GoString() string
GoString returns the string representation
func (*BatchListObjectAttributes) SetMaxResults ¶
func (s *BatchListObjectAttributes) SetMaxResults(v int64) *BatchListObjectAttributes
SetMaxResults sets the MaxResults field's value.
func (*BatchListObjectAttributes) SetNextToken ¶
func (s *BatchListObjectAttributes) SetNextToken(v string) *BatchListObjectAttributes
SetNextToken sets the NextToken field's value.
func (*BatchListObjectAttributes) SetObjectReference ¶
func (s *BatchListObjectAttributes) SetObjectReference(v *ObjectReference) *BatchListObjectAttributes
SetObjectReference sets the ObjectReference field's value.
func (BatchListObjectAttributes) String ¶
func (s BatchListObjectAttributes) String() string
String returns the string representation
func (*BatchListObjectAttributes) Validate ¶
func (s *BatchListObjectAttributes) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchListObjectAttributesResponse ¶
type BatchListObjectAttributesResponse struct { // Attributes map associated with the object. AttributeArn is the key; attribute // value is the value. Attributes []*AttributeKeyAndValue `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Represents the output of a ListObjectAttributes response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchListObjectAttributesResponse
func (BatchListObjectAttributesResponse) GoString ¶
func (s BatchListObjectAttributesResponse) GoString() string
GoString returns the string representation
func (*BatchListObjectAttributesResponse) SetAttributes ¶
func (s *BatchListObjectAttributesResponse) SetAttributes(v []*AttributeKeyAndValue) *BatchListObjectAttributesResponse
SetAttributes sets the Attributes field's value.
func (*BatchListObjectAttributesResponse) SetNextToken ¶
func (s *BatchListObjectAttributesResponse) SetNextToken(v string) *BatchListObjectAttributesResponse
SetNextToken sets the NextToken field's value.
func (BatchListObjectAttributesResponse) String ¶
func (s BatchListObjectAttributesResponse) String() string
String returns the string representation
type BatchListObjectChildren ¶
type BatchListObjectChildren struct { // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference of the object for which child objects are being listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a ListObjectChildren operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchListObjectChildren
func (BatchListObjectChildren) GoString ¶
func (s BatchListObjectChildren) GoString() string
GoString returns the string representation
func (*BatchListObjectChildren) SetMaxResults ¶
func (s *BatchListObjectChildren) SetMaxResults(v int64) *BatchListObjectChildren
SetMaxResults sets the MaxResults field's value.
func (*BatchListObjectChildren) SetNextToken ¶
func (s *BatchListObjectChildren) SetNextToken(v string) *BatchListObjectChildren
SetNextToken sets the NextToken field's value.
func (*BatchListObjectChildren) SetObjectReference ¶
func (s *BatchListObjectChildren) SetObjectReference(v *ObjectReference) *BatchListObjectChildren
SetObjectReference sets the ObjectReference field's value.
func (BatchListObjectChildren) String ¶
func (s BatchListObjectChildren) String() string
String returns the string representation
func (*BatchListObjectChildren) Validate ¶
func (s *BatchListObjectChildren) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchListObjectChildrenResponse ¶
type BatchListObjectChildrenResponse struct { // Children structure, which is a map with key as the LinkName and ObjectIdentifier // as the value. Children map[string]*string `type:"map"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Represents the output of a ListObjectChildren response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchListObjectChildrenResponse
func (BatchListObjectChildrenResponse) GoString ¶
func (s BatchListObjectChildrenResponse) GoString() string
GoString returns the string representation
func (*BatchListObjectChildrenResponse) SetChildren ¶
func (s *BatchListObjectChildrenResponse) SetChildren(v map[string]*string) *BatchListObjectChildrenResponse
SetChildren sets the Children field's value.
func (*BatchListObjectChildrenResponse) SetNextToken ¶
func (s *BatchListObjectChildrenResponse) SetNextToken(v string) *BatchListObjectChildrenResponse
SetNextToken sets the NextToken field's value.
func (BatchListObjectChildrenResponse) String ¶
func (s BatchListObjectChildrenResponse) String() string
String returns the string representation
type BatchReadException ¶
type BatchReadException struct { // Exception message associated with the failure. Message *string `type:"string"` // Type of exception, such as InvalidArnException. Type *string `type:"string" enum:"BatchReadExceptionType"` // contains filtered or unexported fields }
Batch Read Exception structure, which contains exception type and message. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadException
func (BatchReadException) GoString ¶
func (s BatchReadException) GoString() string
GoString returns the string representation
func (*BatchReadException) SetMessage ¶
func (s *BatchReadException) SetMessage(v string) *BatchReadException
SetMessage sets the Message field's value.
func (*BatchReadException) SetType ¶
func (s *BatchReadException) SetType(v string) *BatchReadException
SetType sets the Type field's value.
func (BatchReadException) String ¶
func (s BatchReadException) String() string
String returns the string representation
type BatchReadInput ¶
type BatchReadInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory. For more information, see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // List of operations that are part of the batch. // // Operations is a required field Operations []*BatchReadOperation `type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadRequest
func (BatchReadInput) GoString ¶
func (s BatchReadInput) GoString() string
GoString returns the string representation
func (*BatchReadInput) SetConsistencyLevel ¶
func (s *BatchReadInput) SetConsistencyLevel(v string) *BatchReadInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*BatchReadInput) SetDirectoryArn ¶
func (s *BatchReadInput) SetDirectoryArn(v string) *BatchReadInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*BatchReadInput) SetOperations ¶
func (s *BatchReadInput) SetOperations(v []*BatchReadOperation) *BatchReadInput
SetOperations sets the Operations field's value.
func (BatchReadInput) String ¶
func (s BatchReadInput) String() string
String returns the string representation
func (*BatchReadInput) Validate ¶
func (s *BatchReadInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchReadOperation ¶
type BatchReadOperation struct { // Lists all attributes associated with an object. ListObjectAttributes *BatchListObjectAttributes `type:"structure"` // Returns a paginated list of child objects that are associated with a given // object. ListObjectChildren *BatchListObjectChildren `type:"structure"` // contains filtered or unexported fields }
Represents the output of a BatchRead operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadOperation
func (BatchReadOperation) GoString ¶
func (s BatchReadOperation) GoString() string
GoString returns the string representation
func (*BatchReadOperation) SetListObjectAttributes ¶
func (s *BatchReadOperation) SetListObjectAttributes(v *BatchListObjectAttributes) *BatchReadOperation
SetListObjectAttributes sets the ListObjectAttributes field's value.
func (*BatchReadOperation) SetListObjectChildren ¶
func (s *BatchReadOperation) SetListObjectChildren(v *BatchListObjectChildren) *BatchReadOperation
SetListObjectChildren sets the ListObjectChildren field's value.
func (BatchReadOperation) String ¶
func (s BatchReadOperation) String() string
String returns the string representation
func (*BatchReadOperation) Validate ¶
func (s *BatchReadOperation) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchReadOperationResponse ¶
type BatchReadOperationResponse struct { // Identifies which operation in a batch has failed. ExceptionResponse *BatchReadException `type:"structure"` // Identifies which operation in a batch has succeeded. SuccessfulResponse *BatchReadSuccessfulResponse `type:"structure"` // contains filtered or unexported fields }
Represents the output of a BatchRead response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadOperationResponse
func (BatchReadOperationResponse) GoString ¶
func (s BatchReadOperationResponse) GoString() string
GoString returns the string representation
func (*BatchReadOperationResponse) SetExceptionResponse ¶
func (s *BatchReadOperationResponse) SetExceptionResponse(v *BatchReadException) *BatchReadOperationResponse
SetExceptionResponse sets the ExceptionResponse field's value.
func (*BatchReadOperationResponse) SetSuccessfulResponse ¶
func (s *BatchReadOperationResponse) SetSuccessfulResponse(v *BatchReadSuccessfulResponse) *BatchReadOperationResponse
SetSuccessfulResponse sets the SuccessfulResponse field's value.
func (BatchReadOperationResponse) String ¶
func (s BatchReadOperationResponse) String() string
String returns the string representation
type BatchReadOutput ¶
type BatchReadOutput struct { // List of all the responses for each batch read. Responses []*BatchReadOperationResponse `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadResponse
func (BatchReadOutput) GoString ¶
func (s BatchReadOutput) GoString() string
GoString returns the string representation
func (*BatchReadOutput) SetResponses ¶
func (s *BatchReadOutput) SetResponses(v []*BatchReadOperationResponse) *BatchReadOutput
SetResponses sets the Responses field's value.
func (BatchReadOutput) String ¶
func (s BatchReadOutput) String() string
String returns the string representation
type BatchReadSuccessfulResponse ¶
type BatchReadSuccessfulResponse struct { // Lists all attributes associated with an object. ListObjectAttributes *BatchListObjectAttributesResponse `type:"structure"` // Returns a paginated list of child objects associated with a given object. ListObjectChildren *BatchListObjectChildrenResponse `type:"structure"` // contains filtered or unexported fields }
Represents the output of a BatchRead success response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchReadSuccessfulResponse
func (BatchReadSuccessfulResponse) GoString ¶
func (s BatchReadSuccessfulResponse) GoString() string
GoString returns the string representation
func (*BatchReadSuccessfulResponse) SetListObjectAttributes ¶
func (s *BatchReadSuccessfulResponse) SetListObjectAttributes(v *BatchListObjectAttributesResponse) *BatchReadSuccessfulResponse
SetListObjectAttributes sets the ListObjectAttributes field's value.
func (*BatchReadSuccessfulResponse) SetListObjectChildren ¶
func (s *BatchReadSuccessfulResponse) SetListObjectChildren(v *BatchListObjectChildrenResponse) *BatchReadSuccessfulResponse
SetListObjectChildren sets the ListObjectChildren field's value.
func (BatchReadSuccessfulResponse) String ¶
func (s BatchReadSuccessfulResponse) String() string
String returns the string representation
type BatchRemoveFacetFromObject ¶
type BatchRemoveFacetFromObject struct { // A reference to the object whose facet will be removed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // The facet to remove from the object. // // SchemaFacet is a required field SchemaFacet *SchemaFacet `type:"structure" required:"true"` // contains filtered or unexported fields }
Batch operation to remove a facet from an object. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchRemoveFacetFromObject
func (BatchRemoveFacetFromObject) GoString ¶
func (s BatchRemoveFacetFromObject) GoString() string
GoString returns the string representation
func (*BatchRemoveFacetFromObject) SetObjectReference ¶
func (s *BatchRemoveFacetFromObject) SetObjectReference(v *ObjectReference) *BatchRemoveFacetFromObject
SetObjectReference sets the ObjectReference field's value.
func (*BatchRemoveFacetFromObject) SetSchemaFacet ¶
func (s *BatchRemoveFacetFromObject) SetSchemaFacet(v *SchemaFacet) *BatchRemoveFacetFromObject
SetSchemaFacet sets the SchemaFacet field's value.
func (BatchRemoveFacetFromObject) String ¶
func (s BatchRemoveFacetFromObject) String() string
String returns the string representation
func (*BatchRemoveFacetFromObject) Validate ¶
func (s *BatchRemoveFacetFromObject) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchRemoveFacetFromObjectResponse ¶
type BatchRemoveFacetFromObjectResponse struct {
// contains filtered or unexported fields
}
Empty result representing success. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchRemoveFacetFromObjectResponse
func (BatchRemoveFacetFromObjectResponse) GoString ¶
func (s BatchRemoveFacetFromObjectResponse) GoString() string
GoString returns the string representation
func (BatchRemoveFacetFromObjectResponse) String ¶
func (s BatchRemoveFacetFromObjectResponse) String() string
String returns the string representation
type BatchUpdateObjectAttributes ¶
type BatchUpdateObjectAttributes struct { // Attributes update structure. // // AttributeUpdates is a required field AttributeUpdates []*ObjectAttributeUpdate `type:"list" required:"true"` // Reference that identifies the object. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a BatchUpdate operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchUpdateObjectAttributes
func (BatchUpdateObjectAttributes) GoString ¶
func (s BatchUpdateObjectAttributes) GoString() string
GoString returns the string representation
func (*BatchUpdateObjectAttributes) SetAttributeUpdates ¶
func (s *BatchUpdateObjectAttributes) SetAttributeUpdates(v []*ObjectAttributeUpdate) *BatchUpdateObjectAttributes
SetAttributeUpdates sets the AttributeUpdates field's value.
func (*BatchUpdateObjectAttributes) SetObjectReference ¶
func (s *BatchUpdateObjectAttributes) SetObjectReference(v *ObjectReference) *BatchUpdateObjectAttributes
SetObjectReference sets the ObjectReference field's value.
func (BatchUpdateObjectAttributes) String ¶
func (s BatchUpdateObjectAttributes) String() string
String returns the string representation
func (*BatchUpdateObjectAttributes) Validate ¶
func (s *BatchUpdateObjectAttributes) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchUpdateObjectAttributesResponse ¶
type BatchUpdateObjectAttributesResponse struct { // ID associated with the object. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Represents the output of a BatchUpdate response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchUpdateObjectAttributesResponse
func (BatchUpdateObjectAttributesResponse) GoString ¶
func (s BatchUpdateObjectAttributesResponse) GoString() string
GoString returns the string representation
func (*BatchUpdateObjectAttributesResponse) SetObjectIdentifier ¶
func (s *BatchUpdateObjectAttributesResponse) SetObjectIdentifier(v string) *BatchUpdateObjectAttributesResponse
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (BatchUpdateObjectAttributesResponse) String ¶
func (s BatchUpdateObjectAttributesResponse) String() string
String returns the string representation
type BatchWriteInput ¶
type BatchWriteInput struct { // ARN associated with the Directory. For more information, see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // List of operations that are part of the batch. // // Operations is a required field Operations []*BatchWriteOperation `type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWriteRequest
func (BatchWriteInput) GoString ¶
func (s BatchWriteInput) GoString() string
GoString returns the string representation
func (*BatchWriteInput) SetDirectoryArn ¶
func (s *BatchWriteInput) SetDirectoryArn(v string) *BatchWriteInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*BatchWriteInput) SetOperations ¶
func (s *BatchWriteInput) SetOperations(v []*BatchWriteOperation) *BatchWriteInput
SetOperations sets the Operations field's value.
func (BatchWriteInput) String ¶
func (s BatchWriteInput) String() string
String returns the string representation
func (*BatchWriteInput) Validate ¶
func (s *BatchWriteInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchWriteOperation ¶
type BatchWriteOperation struct { // Batch operation adding a facet to an object. AddFacetToObject *BatchAddFacetToObject `type:"structure"` // Attaches an object to a Directory. AttachObject *BatchAttachObject `type:"structure"` // Creates an object. CreateObject *BatchCreateObject `type:"structure"` // Deletes an object in a Directory. DeleteObject *BatchDeleteObject `type:"structure"` // Detaches an object from a Directory. DetachObject *BatchDetachObject `type:"structure"` // Batch operation removing a facet from an object. RemoveFacetFromObject *BatchRemoveFacetFromObject `type:"structure"` // Update a given object's attributes. UpdateObjectAttributes *BatchUpdateObjectAttributes `type:"structure"` // contains filtered or unexported fields }
Represents the output of a BatchWrite operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWriteOperation
func (BatchWriteOperation) GoString ¶
func (s BatchWriteOperation) GoString() string
GoString returns the string representation
func (*BatchWriteOperation) SetAddFacetToObject ¶
func (s *BatchWriteOperation) SetAddFacetToObject(v *BatchAddFacetToObject) *BatchWriteOperation
SetAddFacetToObject sets the AddFacetToObject field's value.
func (*BatchWriteOperation) SetAttachObject ¶
func (s *BatchWriteOperation) SetAttachObject(v *BatchAttachObject) *BatchWriteOperation
SetAttachObject sets the AttachObject field's value.
func (*BatchWriteOperation) SetCreateObject ¶
func (s *BatchWriteOperation) SetCreateObject(v *BatchCreateObject) *BatchWriteOperation
SetCreateObject sets the CreateObject field's value.
func (*BatchWriteOperation) SetDeleteObject ¶
func (s *BatchWriteOperation) SetDeleteObject(v *BatchDeleteObject) *BatchWriteOperation
SetDeleteObject sets the DeleteObject field's value.
func (*BatchWriteOperation) SetDetachObject ¶
func (s *BatchWriteOperation) SetDetachObject(v *BatchDetachObject) *BatchWriteOperation
SetDetachObject sets the DetachObject field's value.
func (*BatchWriteOperation) SetRemoveFacetFromObject ¶
func (s *BatchWriteOperation) SetRemoveFacetFromObject(v *BatchRemoveFacetFromObject) *BatchWriteOperation
SetRemoveFacetFromObject sets the RemoveFacetFromObject field's value.
func (*BatchWriteOperation) SetUpdateObjectAttributes ¶
func (s *BatchWriteOperation) SetUpdateObjectAttributes(v *BatchUpdateObjectAttributes) *BatchWriteOperation
SetUpdateObjectAttributes sets the UpdateObjectAttributes field's value.
func (BatchWriteOperation) String ¶
func (s BatchWriteOperation) String() string
String returns the string representation
func (*BatchWriteOperation) Validate ¶
func (s *BatchWriteOperation) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BatchWriteOperationResponse ¶
type BatchWriteOperationResponse struct { // Result of an add facet to object batch operation. AddFacetToObject *BatchAddFacetToObjectResponse `type:"structure"` // Attaches an object to a Directory. AttachObject *BatchAttachObjectResponse `type:"structure"` // Creates an object in a Directory. CreateObject *BatchCreateObjectResponse `type:"structure"` // Deletes an object in a Directory. DeleteObject *BatchDeleteObjectResponse `type:"structure"` // Detaches an object from a Directory. DetachObject *BatchDetachObjectResponse `type:"structure"` // Result of a batch remove facet from object operation. RemoveFacetFromObject *BatchRemoveFacetFromObjectResponse `type:"structure"` // Updates a given object’s attributes. UpdateObjectAttributes *BatchUpdateObjectAttributesResponse `type:"structure"` // contains filtered or unexported fields }
Represents the output of a BatchWrite response operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWriteOperationResponse
func (BatchWriteOperationResponse) GoString ¶
func (s BatchWriteOperationResponse) GoString() string
GoString returns the string representation
func (*BatchWriteOperationResponse) SetAddFacetToObject ¶
func (s *BatchWriteOperationResponse) SetAddFacetToObject(v *BatchAddFacetToObjectResponse) *BatchWriteOperationResponse
SetAddFacetToObject sets the AddFacetToObject field's value.
func (*BatchWriteOperationResponse) SetAttachObject ¶
func (s *BatchWriteOperationResponse) SetAttachObject(v *BatchAttachObjectResponse) *BatchWriteOperationResponse
SetAttachObject sets the AttachObject field's value.
func (*BatchWriteOperationResponse) SetCreateObject ¶
func (s *BatchWriteOperationResponse) SetCreateObject(v *BatchCreateObjectResponse) *BatchWriteOperationResponse
SetCreateObject sets the CreateObject field's value.
func (*BatchWriteOperationResponse) SetDeleteObject ¶
func (s *BatchWriteOperationResponse) SetDeleteObject(v *BatchDeleteObjectResponse) *BatchWriteOperationResponse
SetDeleteObject sets the DeleteObject field's value.
func (*BatchWriteOperationResponse) SetDetachObject ¶
func (s *BatchWriteOperationResponse) SetDetachObject(v *BatchDetachObjectResponse) *BatchWriteOperationResponse
SetDetachObject sets the DetachObject field's value.
func (*BatchWriteOperationResponse) SetRemoveFacetFromObject ¶
func (s *BatchWriteOperationResponse) SetRemoveFacetFromObject(v *BatchRemoveFacetFromObjectResponse) *BatchWriteOperationResponse
SetRemoveFacetFromObject sets the RemoveFacetFromObject field's value.
func (*BatchWriteOperationResponse) SetUpdateObjectAttributes ¶
func (s *BatchWriteOperationResponse) SetUpdateObjectAttributes(v *BatchUpdateObjectAttributesResponse) *BatchWriteOperationResponse
SetUpdateObjectAttributes sets the UpdateObjectAttributes field's value.
func (BatchWriteOperationResponse) String ¶
func (s BatchWriteOperationResponse) String() string
String returns the string representation
type BatchWriteOutput ¶
type BatchWriteOutput struct { // List of all the responses for each batch write. Responses []*BatchWriteOperationResponse `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWriteResponse
func (BatchWriteOutput) GoString ¶
func (s BatchWriteOutput) GoString() string
GoString returns the string representation
func (*BatchWriteOutput) SetResponses ¶
func (s *BatchWriteOutput) SetResponses(v []*BatchWriteOperationResponse) *BatchWriteOutput
SetResponses sets the Responses field's value.
func (BatchWriteOutput) String ¶
func (s BatchWriteOutput) String() string
String returns the string representation
type CloudDirectory ¶
Amazon Cloud Directory is a component of the AWS Directory Service that simplifies the development and management of cloud-scale web, mobile and IoT applications. This guide describes the Cloud Directory operations that you can call programatically and includes detailed information on data types and errors. For information about AWS Directory Services features, see AWS Directory Service (https://aws.amazon.com/directoryservice/) and the AWS Directory Service Administration Guide (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/what_is.html). The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10
func New ¶
func New(p client.ConfigProvider, cfgs ...*aws.Config) *CloudDirectory
New creates a new instance of the CloudDirectory client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.
Example:
// Create a CloudDirectory client from just a session. svc := clouddirectory.New(mySession) // Create a CloudDirectory client with additional configuration svc := clouddirectory.New(mySession, aws.NewConfig().WithRegion("us-west-2"))
func (*CloudDirectory) AddFacetToObject ¶
func (c *CloudDirectory) AddFacetToObject(input *AddFacetToObjectInput) (*AddFacetToObjectOutput, error)
AddFacetToObject API operation for Amazon CloudDirectory.
Adds a new Facet to an object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation AddFacetToObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetValidationException "FacetValidationException" The Facet you provided was not well formed or could not be validated with the schema.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AddFacetToObject
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.AddFacetToObjectInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, SchemaFacet: &clouddirectory.SchemaFacet{ // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, ObjectAttributeList: []*clouddirectory.AttributeKeyAndValue{ { // Required Key: &clouddirectory.AttributeKey{ // Required FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, Value: &clouddirectory.TypedAttributeValue{ // Required BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, // More values... }, } resp, err := svc.AddFacetToObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) AddFacetToObjectRequest ¶
func (c *CloudDirectory) AddFacetToObjectRequest(input *AddFacetToObjectInput) (req *request.Request, output *AddFacetToObjectOutput)
AddFacetToObjectRequest generates a "aws/request.Request" representing the client's request for the AddFacetToObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AddFacetToObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddFacetToObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AddFacetToObjectRequest method. req, resp := client.AddFacetToObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AddFacetToObject
func (*CloudDirectory) ApplySchema ¶
func (c *CloudDirectory) ApplySchema(input *ApplySchemaInput) (*ApplySchemaOutput, error)
ApplySchema API operation for Amazon CloudDirectory.
Copies input published schema into Directory with same name and version as that of published schema .
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ApplySchema for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidAttachmentException "InvalidAttachmentException" Indicates that an attempt to attach an object with the same link name or to apply a schema with same name has occurred. Rename the link or the schema and then try again.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ApplySchema
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ApplySchemaInput{ DirectoryArn: aws.String("Arn"), // Required PublishedSchemaArn: aws.String("Arn"), // Required } resp, err := svc.ApplySchema(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ApplySchemaRequest ¶
func (c *CloudDirectory) ApplySchemaRequest(input *ApplySchemaInput) (req *request.Request, output *ApplySchemaOutput)
ApplySchemaRequest generates a "aws/request.Request" representing the client's request for the ApplySchema operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ApplySchema for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ApplySchema method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ApplySchemaRequest method. req, resp := client.ApplySchemaRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ApplySchema
func (*CloudDirectory) AttachObject ¶
func (c *CloudDirectory) AttachObject(input *AttachObjectInput) (*AttachObjectOutput, error)
AttachObject API operation for Amazon CloudDirectory.
Attaches an existing object to another object. An object can be accessed in two ways:
Using the path ¶
Using ObjectIdentifier ¶
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation AttachObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeLinkNameAlreadyInUseException "LinkNameAlreadyInUseException" Indicates that a link could not be created due to a naming conflict. Choose a different name and then try again.
ErrCodeInvalidAttachmentException "InvalidAttachmentException" Indicates that an attempt to attach an object with the same link name or to apply a schema with same name has occurred. Rename the link or the schema and then try again.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachObject
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.AttachObjectInput{ ChildReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, DirectoryArn: aws.String("Arn"), // Required LinkName: aws.String("LinkName"), // Required ParentReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.AttachObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) AttachObjectRequest ¶
func (c *CloudDirectory) AttachObjectRequest(input *AttachObjectInput) (req *request.Request, output *AttachObjectOutput)
AttachObjectRequest generates a "aws/request.Request" representing the client's request for the AttachObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AttachObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AttachObjectRequest method. req, resp := client.AttachObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachObject
func (*CloudDirectory) AttachPolicy ¶
func (c *CloudDirectory) AttachPolicy(input *AttachPolicyInput) (*AttachPolicyOutput, error)
AttachPolicy API operation for Amazon CloudDirectory.
Attaches a policy object to a regular object. An object can have a limited number of attached policies.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation AttachPolicy for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeNotPolicyException "NotPolicyException" Indicates the requested operation can only operate on policy objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachPolicy
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.AttachPolicyInput{ ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, PolicyReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, DirectoryArn: aws.String("Arn"), } resp, err := svc.AttachPolicy(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) AttachPolicyRequest ¶
func (c *CloudDirectory) AttachPolicyRequest(input *AttachPolicyInput) (req *request.Request, output *AttachPolicyOutput)
AttachPolicyRequest generates a "aws/request.Request" representing the client's request for the AttachPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AttachPolicy for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachPolicy method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AttachPolicyRequest method. req, resp := client.AttachPolicyRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachPolicy
func (*CloudDirectory) AttachToIndex ¶
func (c *CloudDirectory) AttachToIndex(input *AttachToIndexInput) (*AttachToIndexOutput, error)
AttachToIndex API operation for Amazon CloudDirectory.
Attaches the specified object to the specified index.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation AttachToIndex for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeLinkNameAlreadyInUseException "LinkNameAlreadyInUseException" Indicates that a link could not be created due to a naming conflict. Choose a different name and then try again.
ErrCodeIndexedAttributeMissingException "IndexedAttributeMissingException" An object has been attempted to be attached to an object that does not have the appropriate attribute value.
ErrCodeNotIndexException "NotIndexException" Indicates the requested operation can only operate on index objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachToIndex
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.AttachToIndexInput{ DirectoryArn: aws.String("Arn"), // Required IndexReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, TargetReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.AttachToIndex(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) AttachToIndexRequest ¶
func (c *CloudDirectory) AttachToIndexRequest(input *AttachToIndexInput) (req *request.Request, output *AttachToIndexOutput)
AttachToIndexRequest generates a "aws/request.Request" representing the client's request for the AttachToIndex operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AttachToIndex for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachToIndex method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AttachToIndexRequest method. req, resp := client.AttachToIndexRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/AttachToIndex
func (*CloudDirectory) BatchRead ¶
func (c *CloudDirectory) BatchRead(input *BatchReadInput) (*BatchReadOutput, error)
BatchRead API operation for Amazon CloudDirectory.
Performs all the read operations in a batch.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation BatchRead for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchRead
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.BatchReadInput{ DirectoryArn: aws.String("Arn"), // Required Operations: []*clouddirectory.BatchReadOperation{ // Required { // Required ListObjectAttributes: &clouddirectory.BatchListObjectAttributes{ ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), }, ListObjectChildren: &clouddirectory.BatchListObjectChildren{ ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), }, }, // More values... }, ConsistencyLevel: aws.String("ConsistencyLevel"), } resp, err := svc.BatchRead(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) BatchReadRequest ¶
func (c *CloudDirectory) BatchReadRequest(input *BatchReadInput) (req *request.Request, output *BatchReadOutput)
BatchReadRequest generates a "aws/request.Request" representing the client's request for the BatchRead operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See BatchRead for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchRead method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the BatchReadRequest method. req, resp := client.BatchReadRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchRead
func (*CloudDirectory) BatchWrite ¶
func (c *CloudDirectory) BatchWrite(input *BatchWriteInput) (*BatchWriteOutput, error)
BatchWrite API operation for Amazon CloudDirectory.
Performs all the write operations in a batch. Either all the operations succeed or none. Batch writes supports only object-related operations.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation BatchWrite for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeBatchWriteException "BatchWriteException" A BatchWrite exception has occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWrite
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.BatchWriteInput{ DirectoryArn: aws.String("Arn"), // Required Operations: []*clouddirectory.BatchWriteOperation{ // Required { // Required AddFacetToObject: &clouddirectory.BatchAddFacetToObject{ ObjectAttributeList: []*clouddirectory.AttributeKeyAndValue{ // Required { // Required Key: &clouddirectory.AttributeKey{ // Required FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, Value: &clouddirectory.TypedAttributeValue{ // Required BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, // More values... }, ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, SchemaFacet: &clouddirectory.SchemaFacet{ // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, }, AttachObject: &clouddirectory.BatchAttachObject{ ChildReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, LinkName: aws.String("LinkName"), // Required ParentReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, }, CreateObject: &clouddirectory.BatchCreateObject{ BatchReferenceName: aws.String("BatchReferenceName"), // Required LinkName: aws.String("LinkName"), // Required ObjectAttributeList: []*clouddirectory.AttributeKeyAndValue{ // Required { // Required Key: &clouddirectory.AttributeKey{ // Required FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, Value: &clouddirectory.TypedAttributeValue{ // Required BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, // More values... }, ParentReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, SchemaFacet: []*clouddirectory.SchemaFacet{ // Required { // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, // More values... }, }, DeleteObject: &clouddirectory.BatchDeleteObject{ ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, }, DetachObject: &clouddirectory.BatchDetachObject{ BatchReferenceName: aws.String("BatchReferenceName"), // Required LinkName: aws.String("LinkName"), // Required ParentReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, }, RemoveFacetFromObject: &clouddirectory.BatchRemoveFacetFromObject{ ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, SchemaFacet: &clouddirectory.SchemaFacet{ // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, }, UpdateObjectAttributes: &clouddirectory.BatchUpdateObjectAttributes{ AttributeUpdates: []*clouddirectory.ObjectAttributeUpdate{ // Required { // Required ObjectAttributeAction: &clouddirectory.ObjectAttributeAction{ ObjectAttributeActionType: aws.String("UpdateActionType"), ObjectAttributeUpdateValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, ObjectAttributeKey: &clouddirectory.AttributeKey{ FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, }, // More values... }, ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, }, }, // More values... }, } resp, err := svc.BatchWrite(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) BatchWriteRequest ¶
func (c *CloudDirectory) BatchWriteRequest(input *BatchWriteInput) (req *request.Request, output *BatchWriteOutput)
BatchWriteRequest generates a "aws/request.Request" representing the client's request for the BatchWrite operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See BatchWrite for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchWrite method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the BatchWriteRequest method. req, resp := client.BatchWriteRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/BatchWrite
func (*CloudDirectory) CreateDirectory ¶
func (c *CloudDirectory) CreateDirectory(input *CreateDirectoryInput) (*CreateDirectoryOutput, error)
CreateDirectory API operation for Amazon CloudDirectory.
Creates a Directory by copying the published schema into the directory. A directory cannot be created without a schema.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation CreateDirectory for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryAlreadyExistsException "DirectoryAlreadyExistsException" Indicates that a Directory could not be created due to a naming conflict. Choose a different name and try again.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateDirectory
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.CreateDirectoryInput{ Name: aws.String("DirectoryName"), // Required SchemaArn: aws.String("Arn"), // Required } resp, err := svc.CreateDirectory(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) CreateDirectoryRequest ¶
func (c *CloudDirectory) CreateDirectoryRequest(input *CreateDirectoryInput) (req *request.Request, output *CreateDirectoryOutput)
CreateDirectoryRequest generates a "aws/request.Request" representing the client's request for the CreateDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateDirectory for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateDirectory method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateDirectoryRequest method. req, resp := client.CreateDirectoryRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateDirectory
func (*CloudDirectory) CreateFacet ¶
func (c *CloudDirectory) CreateFacet(input *CreateFacetInput) (*CreateFacetOutput, error)
CreateFacet API operation for Amazon CloudDirectory.
Creates a new Facet in a schema. Facet creation is allowed only in development or applied schemas.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation CreateFacet for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetAlreadyExistsException "FacetAlreadyExistsException" A facet with the same name already exists.
ErrCodeInvalidRuleException "InvalidRuleException" Occurs when any of the rule parameter keys or values are invalid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateFacet
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.CreateFacetInput{ Name: aws.String("FacetName"), // Required ObjectType: aws.String("ObjectType"), // Required SchemaArn: aws.String("Arn"), // Required Attributes: []*clouddirectory.FacetAttribute{ { // Required Name: aws.String("AttributeName"), // Required AttributeDefinition: &clouddirectory.FacetAttributeDefinition{ Type: aws.String("FacetAttributeType"), // Required DefaultValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, IsImmutable: aws.Bool(true), Rules: map[string]*clouddirectory.Rule{ "Key": { // Required Parameters: map[string]*string{ "Key": aws.String("RuleParameterValue"), // Required // More values... }, Type: aws.String("RuleType"), }, // More values... }, }, AttributeReference: &clouddirectory.FacetAttributeReference{ TargetAttributeName: aws.String("AttributeName"), // Required TargetFacetName: aws.String("FacetName"), // Required }, RequiredBehavior: aws.String("RequiredAttributeBehavior"), }, // More values... }, } resp, err := svc.CreateFacet(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) CreateFacetRequest ¶
func (c *CloudDirectory) CreateFacetRequest(input *CreateFacetInput) (req *request.Request, output *CreateFacetOutput)
CreateFacetRequest generates a "aws/request.Request" representing the client's request for the CreateFacet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateFacet for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateFacet method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateFacetRequest method. req, resp := client.CreateFacetRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateFacet
func (*CloudDirectory) CreateIndex ¶
func (c *CloudDirectory) CreateIndex(input *CreateIndexInput) (*CreateIndexOutput, error)
CreateIndex API operation for Amazon CloudDirectory.
Creates an index object. See Indexing (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_indexing.html) for more information.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation CreateIndex for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetValidationException "FacetValidationException" The Facet you provided was not well formed or could not be validated with the schema.
ErrCodeLinkNameAlreadyInUseException "LinkNameAlreadyInUseException" Indicates that a link could not be created due to a naming conflict. Choose a different name and then try again.
ErrCodeUnsupportedIndexTypeException "UnsupportedIndexTypeException" Indicates the requested index type is not supported.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateIndex
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.CreateIndexInput{ DirectoryArn: aws.String("Arn"), // Required IsUnique: aws.Bool(true), // Required OrderedIndexedAttributeList: []*clouddirectory.AttributeKey{ // Required { // Required FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, // More values... }, LinkName: aws.String("LinkName"), ParentReference: &clouddirectory.ObjectReference{ Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.CreateIndex(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) CreateIndexRequest ¶
func (c *CloudDirectory) CreateIndexRequest(input *CreateIndexInput) (req *request.Request, output *CreateIndexOutput)
CreateIndexRequest generates a "aws/request.Request" representing the client's request for the CreateIndex operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateIndex for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateIndex method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateIndexRequest method. req, resp := client.CreateIndexRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateIndex
func (*CloudDirectory) CreateObject ¶
func (c *CloudDirectory) CreateObject(input *CreateObjectInput) (*CreateObjectOutput, error)
CreateObject API operation for Amazon CloudDirectory.
Creates an object in a Directory. Additionally attaches the object to a parent, if a parent reference and LinkName is specified. An object is simply a collection of Facet attributes. You can also use this API call to create a policy object, if the facet from which you create the object is a policy facet.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation CreateObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetValidationException "FacetValidationException" The Facet you provided was not well formed or could not be validated with the schema.
ErrCodeLinkNameAlreadyInUseException "LinkNameAlreadyInUseException" Indicates that a link could not be created due to a naming conflict. Choose a different name and then try again.
ErrCodeUnsupportedIndexTypeException "UnsupportedIndexTypeException" Indicates the requested index type is not supported.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateObject
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.CreateObjectInput{ DirectoryArn: aws.String("Arn"), // Required SchemaFacets: []*clouddirectory.SchemaFacet{ // Required { // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, // More values... }, LinkName: aws.String("LinkName"), ObjectAttributeList: []*clouddirectory.AttributeKeyAndValue{ { // Required Key: &clouddirectory.AttributeKey{ // Required FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, Value: &clouddirectory.TypedAttributeValue{ // Required BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, // More values... }, ParentReference: &clouddirectory.ObjectReference{ Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.CreateObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) CreateObjectRequest ¶
func (c *CloudDirectory) CreateObjectRequest(input *CreateObjectInput) (req *request.Request, output *CreateObjectOutput)
CreateObjectRequest generates a "aws/request.Request" representing the client's request for the CreateObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateObjectRequest method. req, resp := client.CreateObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateObject
func (*CloudDirectory) CreateSchema ¶
func (c *CloudDirectory) CreateSchema(input *CreateSchemaInput) (*CreateSchemaOutput, error)
CreateSchema API operation for Amazon CloudDirectory.
Creates a new schema in a development state. A schema can exist in three phases:
Development: This is a mutable phase of the schema. All new schemas are in the development phase. Once the schema is finalized, it can be published.
Published: Published schemas are immutable and have a version associated with them.
Applied: Applied schemas are mutable in a way that allows you to add new schema facets. You can also add new, nonrequired attributes to existing schema facets. You can apply only published schemas to directories.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation CreateSchema for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeSchemaAlreadyExistsException "SchemaAlreadyExistsException" Indicates that a schema could not be created due to a naming conflict. Please select a different name and then try again.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateSchema
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.CreateSchemaInput{ Name: aws.String("SchemaName"), // Required } resp, err := svc.CreateSchema(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) CreateSchemaRequest ¶
func (c *CloudDirectory) CreateSchemaRequest(input *CreateSchemaInput) (req *request.Request, output *CreateSchemaOutput)
CreateSchemaRequest generates a "aws/request.Request" representing the client's request for the CreateSchema operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateSchema for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSchema method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateSchemaRequest method. req, resp := client.CreateSchemaRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateSchema
func (*CloudDirectory) DeleteDirectory ¶
func (c *CloudDirectory) DeleteDirectory(input *DeleteDirectoryInput) (*DeleteDirectoryOutput, error)
DeleteDirectory API operation for Amazon CloudDirectory.
Deletes a directory. Only disabled directories can be deleted. A deleted directory cannot be undone. Exercise extreme caution when deleting directories.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DeleteDirectory for usage and error information.
Returned Error Codes:
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeDirectoryNotDisabledException "DirectoryNotDisabledException" An operation can only operate on a disabled directory.
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryDeletedException "DirectoryDeletedException" A directory that has been deleted has been attempted to be accessed. Note: The requested resource will eventually cease to exist.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteDirectory
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DeleteDirectoryInput{ DirectoryArn: aws.String("Arn"), // Required } resp, err := svc.DeleteDirectory(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DeleteDirectoryRequest ¶
func (c *CloudDirectory) DeleteDirectoryRequest(input *DeleteDirectoryInput) (req *request.Request, output *DeleteDirectoryOutput)
DeleteDirectoryRequest generates a "aws/request.Request" representing the client's request for the DeleteDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DeleteDirectory for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteDirectory method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteDirectoryRequest method. req, resp := client.DeleteDirectoryRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteDirectory
func (*CloudDirectory) DeleteFacet ¶
func (c *CloudDirectory) DeleteFacet(input *DeleteFacetInput) (*DeleteFacetOutput, error)
DeleteFacet API operation for Amazon CloudDirectory.
Deletes a given Facet. All attributes and Rules associated with the facet will be deleted. Only development schema facets are allowed deletion.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DeleteFacet for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetNotFoundException "FacetNotFoundException" The specified Facet could not be found.
ErrCodeFacetInUseException "FacetInUseException" Occurs when deleting a facet that contains an attribute which is a target to an attribute reference in a different facet.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteFacet
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DeleteFacetInput{ Name: aws.String("FacetName"), // Required SchemaArn: aws.String("Arn"), // Required } resp, err := svc.DeleteFacet(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DeleteFacetRequest ¶
func (c *CloudDirectory) DeleteFacetRequest(input *DeleteFacetInput) (req *request.Request, output *DeleteFacetOutput)
DeleteFacetRequest generates a "aws/request.Request" representing the client's request for the DeleteFacet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DeleteFacet for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteFacet method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteFacetRequest method. req, resp := client.DeleteFacetRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteFacet
func (*CloudDirectory) DeleteObject ¶
func (c *CloudDirectory) DeleteObject(input *DeleteObjectInput) (*DeleteObjectOutput, error)
DeleteObject API operation for Amazon CloudDirectory.
Deletes an object and its associated attributes. Only objects with no children and no parents can be deleted.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DeleteObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeObjectNotDetachedException "ObjectNotDetachedException" Indicates the requested operation cannot be completed because the object has not been detached from the tree.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteObject
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DeleteObjectInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.DeleteObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DeleteObjectRequest ¶
func (c *CloudDirectory) DeleteObjectRequest(input *DeleteObjectInput) (req *request.Request, output *DeleteObjectOutput)
DeleteObjectRequest generates a "aws/request.Request" representing the client's request for the DeleteObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DeleteObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteObjectRequest method. req, resp := client.DeleteObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteObject
func (*CloudDirectory) DeleteSchema ¶
func (c *CloudDirectory) DeleteSchema(input *DeleteSchemaInput) (*DeleteSchemaOutput, error)
DeleteSchema API operation for Amazon CloudDirectory.
Deletes a given schema. Schemas in a development and published state can only be deleted.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DeleteSchema for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeStillContainsLinksException "StillContainsLinksException" The object could not be deleted because links still exist. Remove the links and then try the operation again.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteSchema
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DeleteSchemaInput{ SchemaArn: aws.String("Arn"), // Required } resp, err := svc.DeleteSchema(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DeleteSchemaRequest ¶
func (c *CloudDirectory) DeleteSchemaRequest(input *DeleteSchemaInput) (req *request.Request, output *DeleteSchemaOutput)
DeleteSchemaRequest generates a "aws/request.Request" representing the client's request for the DeleteSchema operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DeleteSchema for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSchema method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteSchemaRequest method. req, resp := client.DeleteSchemaRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteSchema
func (*CloudDirectory) DetachFromIndex ¶
func (c *CloudDirectory) DetachFromIndex(input *DetachFromIndexInput) (*DetachFromIndexOutput, error)
DetachFromIndex API operation for Amazon CloudDirectory.
Detaches the specified object from the specified index.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DetachFromIndex for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeObjectAlreadyDetachedException "ObjectAlreadyDetachedException" Indicates the object is not attached to the index.
ErrCodeNotIndexException "NotIndexException" Indicates the requested operation can only operate on index objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachFromIndex
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DetachFromIndexInput{ DirectoryArn: aws.String("Arn"), // Required IndexReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, TargetReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.DetachFromIndex(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DetachFromIndexRequest ¶
func (c *CloudDirectory) DetachFromIndexRequest(input *DetachFromIndexInput) (req *request.Request, output *DetachFromIndexOutput)
DetachFromIndexRequest generates a "aws/request.Request" representing the client's request for the DetachFromIndex operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DetachFromIndex for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachFromIndex method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DetachFromIndexRequest method. req, resp := client.DetachFromIndexRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachFromIndex
func (*CloudDirectory) DetachObject ¶
func (c *CloudDirectory) DetachObject(input *DetachObjectInput) (*DetachObjectOutput, error)
DetachObject API operation for Amazon CloudDirectory.
Detaches a given object from the parent object. The object that is to be detached from the parent is specified by the link name.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DetachObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachObject
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DetachObjectInput{ DirectoryArn: aws.String("Arn"), // Required LinkName: aws.String("LinkName"), // Required ParentReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.DetachObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DetachObjectRequest ¶
func (c *CloudDirectory) DetachObjectRequest(input *DetachObjectInput) (req *request.Request, output *DetachObjectOutput)
DetachObjectRequest generates a "aws/request.Request" representing the client's request for the DetachObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DetachObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DetachObjectRequest method. req, resp := client.DetachObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachObject
func (*CloudDirectory) DetachPolicy ¶
func (c *CloudDirectory) DetachPolicy(input *DetachPolicyInput) (*DetachPolicyOutput, error)
DetachPolicy API operation for Amazon CloudDirectory.
Detaches a policy from an object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DetachPolicy for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeNotPolicyException "NotPolicyException" Indicates the requested operation can only operate on policy objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachPolicy
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DetachPolicyInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, PolicyReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.DetachPolicy(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DetachPolicyRequest ¶
func (c *CloudDirectory) DetachPolicyRequest(input *DetachPolicyInput) (req *request.Request, output *DetachPolicyOutput)
DetachPolicyRequest generates a "aws/request.Request" representing the client's request for the DetachPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DetachPolicy for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachPolicy method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DetachPolicyRequest method. req, resp := client.DetachPolicyRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachPolicy
func (*CloudDirectory) DisableDirectory ¶
func (c *CloudDirectory) DisableDirectory(input *DisableDirectoryInput) (*DisableDirectoryOutput, error)
DisableDirectory API operation for Amazon CloudDirectory.
Disables the specified directory. Disabled directories cannot be read or written to. Only enabled directories can be disabled. Disabled directories may be reenabled.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation DisableDirectory for usage and error information.
Returned Error Codes:
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeDirectoryDeletedException "DirectoryDeletedException" A directory that has been deleted has been attempted to be accessed. Note: The requested resource will eventually cease to exist.
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DisableDirectory
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.DisableDirectoryInput{ DirectoryArn: aws.String("Arn"), // Required } resp, err := svc.DisableDirectory(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) DisableDirectoryRequest ¶
func (c *CloudDirectory) DisableDirectoryRequest(input *DisableDirectoryInput) (req *request.Request, output *DisableDirectoryOutput)
DisableDirectoryRequest generates a "aws/request.Request" representing the client's request for the DisableDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DisableDirectory for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableDirectory method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DisableDirectoryRequest method. req, resp := client.DisableDirectoryRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DisableDirectory
func (*CloudDirectory) EnableDirectory ¶
func (c *CloudDirectory) EnableDirectory(input *EnableDirectoryInput) (*EnableDirectoryOutput, error)
EnableDirectory API operation for Amazon CloudDirectory.
Enables the specified directory. Only disabled directories can be enabled. Once enabled, the directory can then be read and written to.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation EnableDirectory for usage and error information.
Returned Error Codes:
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeDirectoryDeletedException "DirectoryDeletedException" A directory that has been deleted has been attempted to be accessed. Note: The requested resource will eventually cease to exist.
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/EnableDirectory
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.EnableDirectoryInput{ DirectoryArn: aws.String("Arn"), // Required } resp, err := svc.EnableDirectory(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) EnableDirectoryRequest ¶
func (c *CloudDirectory) EnableDirectoryRequest(input *EnableDirectoryInput) (req *request.Request, output *EnableDirectoryOutput)
EnableDirectoryRequest generates a "aws/request.Request" representing the client's request for the EnableDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See EnableDirectory for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableDirectory method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the EnableDirectoryRequest method. req, resp := client.EnableDirectoryRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/EnableDirectory
func (*CloudDirectory) GetDirectory ¶
func (c *CloudDirectory) GetDirectory(input *GetDirectoryInput) (*GetDirectoryOutput, error)
GetDirectory API operation for Amazon CloudDirectory.
Retrieves metadata about a directory.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation GetDirectory for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetDirectory
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.GetDirectoryInput{ DirectoryArn: aws.String("DirectoryArn"), // Required } resp, err := svc.GetDirectory(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) GetDirectoryRequest ¶
func (c *CloudDirectory) GetDirectoryRequest(input *GetDirectoryInput) (req *request.Request, output *GetDirectoryOutput)
GetDirectoryRequest generates a "aws/request.Request" representing the client's request for the GetDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See GetDirectory for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDirectory method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetDirectoryRequest method. req, resp := client.GetDirectoryRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetDirectory
func (*CloudDirectory) GetFacet ¶
func (c *CloudDirectory) GetFacet(input *GetFacetInput) (*GetFacetOutput, error)
GetFacet API operation for Amazon CloudDirectory.
Gets details of the Facet, such as Facet Name, Attributes, Rules, or ObjectType. You can call this on all kinds of schema facets -- published, development, or applied.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation GetFacet for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetNotFoundException "FacetNotFoundException" The specified Facet could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetFacet
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.GetFacetInput{ Name: aws.String("FacetName"), // Required SchemaArn: aws.String("Arn"), // Required } resp, err := svc.GetFacet(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) GetFacetRequest ¶
func (c *CloudDirectory) GetFacetRequest(input *GetFacetInput) (req *request.Request, output *GetFacetOutput)
GetFacetRequest generates a "aws/request.Request" representing the client's request for the GetFacet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See GetFacet for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetFacet method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetFacetRequest method. req, resp := client.GetFacetRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetFacet
func (*CloudDirectory) GetObjectInformation ¶
func (c *CloudDirectory) GetObjectInformation(input *GetObjectInformationInput) (*GetObjectInformationOutput, error)
GetObjectInformation API operation for Amazon CloudDirectory.
Retrieves metadata about an object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation GetObjectInformation for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetObjectInformation
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.GetObjectInformationInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), } resp, err := svc.GetObjectInformation(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) GetObjectInformationRequest ¶
func (c *CloudDirectory) GetObjectInformationRequest(input *GetObjectInformationInput) (req *request.Request, output *GetObjectInformationOutput)
GetObjectInformationRequest generates a "aws/request.Request" representing the client's request for the GetObjectInformation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See GetObjectInformation for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetObjectInformation method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetObjectInformationRequest method. req, resp := client.GetObjectInformationRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetObjectInformation
func (*CloudDirectory) GetSchemaAsJson ¶
func (c *CloudDirectory) GetSchemaAsJson(input *GetSchemaAsJsonInput) (*GetSchemaAsJsonOutput, error)
GetSchemaAsJson API operation for Amazon CloudDirectory.
Retrieves a JSON representation of the schema. See JSON Schema Format (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_schemas.html#jsonformat) for more information.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation GetSchemaAsJson for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetSchemaAsJson
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.GetSchemaAsJsonInput{ SchemaArn: aws.String("Arn"), // Required } resp, err := svc.GetSchemaAsJson(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) GetSchemaAsJsonRequest ¶
func (c *CloudDirectory) GetSchemaAsJsonRequest(input *GetSchemaAsJsonInput) (req *request.Request, output *GetSchemaAsJsonOutput)
GetSchemaAsJsonRequest generates a "aws/request.Request" representing the client's request for the GetSchemaAsJson operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See GetSchemaAsJson for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetSchemaAsJson method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetSchemaAsJsonRequest method. req, resp := client.GetSchemaAsJsonRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetSchemaAsJson
func (*CloudDirectory) ListAppliedSchemaArns ¶
func (c *CloudDirectory) ListAppliedSchemaArns(input *ListAppliedSchemaArnsInput) (*ListAppliedSchemaArnsOutput, error)
ListAppliedSchemaArns API operation for Amazon CloudDirectory.
Lists schemas applied to a directory.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListAppliedSchemaArns for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAppliedSchemaArns
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListAppliedSchemaArnsInput{ DirectoryArn: aws.String("Arn"), // Required MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListAppliedSchemaArns(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListAppliedSchemaArnsPages ¶
func (c *CloudDirectory) ListAppliedSchemaArnsPages(input *ListAppliedSchemaArnsInput, fn func(p *ListAppliedSchemaArnsOutput, lastPage bool) (shouldContinue bool)) error
ListAppliedSchemaArnsPages iterates over the pages of a ListAppliedSchemaArns operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListAppliedSchemaArns method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListAppliedSchemaArns operation. pageNum := 0 err := client.ListAppliedSchemaArnsPages(params, func(page *ListAppliedSchemaArnsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListAppliedSchemaArnsRequest ¶
func (c *CloudDirectory) ListAppliedSchemaArnsRequest(input *ListAppliedSchemaArnsInput) (req *request.Request, output *ListAppliedSchemaArnsOutput)
ListAppliedSchemaArnsRequest generates a "aws/request.Request" representing the client's request for the ListAppliedSchemaArns operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListAppliedSchemaArns for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListAppliedSchemaArns method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListAppliedSchemaArnsRequest method. req, resp := client.ListAppliedSchemaArnsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAppliedSchemaArns
func (*CloudDirectory) ListAttachedIndices ¶
func (c *CloudDirectory) ListAttachedIndices(input *ListAttachedIndicesInput) (*ListAttachedIndicesOutput, error)
ListAttachedIndices API operation for Amazon CloudDirectory.
Lists indices attached to an object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListAttachedIndices for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAttachedIndices
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListAttachedIndicesInput{ DirectoryArn: aws.String("Arn"), // Required TargetReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListAttachedIndices(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListAttachedIndicesPages ¶
func (c *CloudDirectory) ListAttachedIndicesPages(input *ListAttachedIndicesInput, fn func(p *ListAttachedIndicesOutput, lastPage bool) (shouldContinue bool)) error
ListAttachedIndicesPages iterates over the pages of a ListAttachedIndices operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListAttachedIndices method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListAttachedIndices operation. pageNum := 0 err := client.ListAttachedIndicesPages(params, func(page *ListAttachedIndicesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListAttachedIndicesRequest ¶
func (c *CloudDirectory) ListAttachedIndicesRequest(input *ListAttachedIndicesInput) (req *request.Request, output *ListAttachedIndicesOutput)
ListAttachedIndicesRequest generates a "aws/request.Request" representing the client's request for the ListAttachedIndices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListAttachedIndices for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListAttachedIndices method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListAttachedIndicesRequest method. req, resp := client.ListAttachedIndicesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAttachedIndices
func (*CloudDirectory) ListDevelopmentSchemaArns ¶
func (c *CloudDirectory) ListDevelopmentSchemaArns(input *ListDevelopmentSchemaArnsInput) (*ListDevelopmentSchemaArnsOutput, error)
ListDevelopmentSchemaArns API operation for Amazon CloudDirectory.
Retrieves the ARNs of schemas in the development state.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListDevelopmentSchemaArns for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDevelopmentSchemaArns
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListDevelopmentSchemaArnsInput{ MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListDevelopmentSchemaArns(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListDevelopmentSchemaArnsPages ¶
func (c *CloudDirectory) ListDevelopmentSchemaArnsPages(input *ListDevelopmentSchemaArnsInput, fn func(p *ListDevelopmentSchemaArnsOutput, lastPage bool) (shouldContinue bool)) error
ListDevelopmentSchemaArnsPages iterates over the pages of a ListDevelopmentSchemaArns operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListDevelopmentSchemaArns method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListDevelopmentSchemaArns operation. pageNum := 0 err := client.ListDevelopmentSchemaArnsPages(params, func(page *ListDevelopmentSchemaArnsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListDevelopmentSchemaArnsRequest ¶
func (c *CloudDirectory) ListDevelopmentSchemaArnsRequest(input *ListDevelopmentSchemaArnsInput) (req *request.Request, output *ListDevelopmentSchemaArnsOutput)
ListDevelopmentSchemaArnsRequest generates a "aws/request.Request" representing the client's request for the ListDevelopmentSchemaArns operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListDevelopmentSchemaArns for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListDevelopmentSchemaArns method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListDevelopmentSchemaArnsRequest method. req, resp := client.ListDevelopmentSchemaArnsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDevelopmentSchemaArns
func (*CloudDirectory) ListDirectories ¶
func (c *CloudDirectory) ListDirectories(input *ListDirectoriesInput) (*ListDirectoriesOutput, error)
ListDirectories API operation for Amazon CloudDirectory.
Lists directories created within an account.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListDirectories for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDirectories
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListDirectoriesInput{ MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), State: aws.String("DirectoryState"), } resp, err := svc.ListDirectories(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListDirectoriesPages ¶
func (c *CloudDirectory) ListDirectoriesPages(input *ListDirectoriesInput, fn func(p *ListDirectoriesOutput, lastPage bool) (shouldContinue bool)) error
ListDirectoriesPages iterates over the pages of a ListDirectories operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListDirectories method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListDirectories operation. pageNum := 0 err := client.ListDirectoriesPages(params, func(page *ListDirectoriesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListDirectoriesRequest ¶
func (c *CloudDirectory) ListDirectoriesRequest(input *ListDirectoriesInput) (req *request.Request, output *ListDirectoriesOutput)
ListDirectoriesRequest generates a "aws/request.Request" representing the client's request for the ListDirectories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListDirectories for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListDirectories method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListDirectoriesRequest method. req, resp := client.ListDirectoriesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDirectories
func (*CloudDirectory) ListFacetAttributes ¶
func (c *CloudDirectory) ListFacetAttributes(input *ListFacetAttributesInput) (*ListFacetAttributesOutput, error)
ListFacetAttributes API operation for Amazon CloudDirectory.
Retrieves attributes attached to the facet.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListFacetAttributes for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetNotFoundException "FacetNotFoundException" The specified Facet could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetAttributes
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListFacetAttributesInput{ Name: aws.String("FacetName"), // Required SchemaArn: aws.String("Arn"), // Required MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListFacetAttributes(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListFacetAttributesPages ¶
func (c *CloudDirectory) ListFacetAttributesPages(input *ListFacetAttributesInput, fn func(p *ListFacetAttributesOutput, lastPage bool) (shouldContinue bool)) error
ListFacetAttributesPages iterates over the pages of a ListFacetAttributes operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListFacetAttributes method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListFacetAttributes operation. pageNum := 0 err := client.ListFacetAttributesPages(params, func(page *ListFacetAttributesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListFacetAttributesRequest ¶
func (c *CloudDirectory) ListFacetAttributesRequest(input *ListFacetAttributesInput) (req *request.Request, output *ListFacetAttributesOutput)
ListFacetAttributesRequest generates a "aws/request.Request" representing the client's request for the ListFacetAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListFacetAttributes for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListFacetAttributes method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListFacetAttributesRequest method. req, resp := client.ListFacetAttributesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetAttributes
func (*CloudDirectory) ListFacetNames ¶
func (c *CloudDirectory) ListFacetNames(input *ListFacetNamesInput) (*ListFacetNamesOutput, error)
ListFacetNames API operation for Amazon CloudDirectory.
Retrieves the names of facets that exist in a schema.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListFacetNames for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetNames
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListFacetNamesInput{ SchemaArn: aws.String("Arn"), // Required MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListFacetNames(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListFacetNamesPages ¶
func (c *CloudDirectory) ListFacetNamesPages(input *ListFacetNamesInput, fn func(p *ListFacetNamesOutput, lastPage bool) (shouldContinue bool)) error
ListFacetNamesPages iterates over the pages of a ListFacetNames operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListFacetNames method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListFacetNames operation. pageNum := 0 err := client.ListFacetNamesPages(params, func(page *ListFacetNamesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListFacetNamesRequest ¶
func (c *CloudDirectory) ListFacetNamesRequest(input *ListFacetNamesInput) (req *request.Request, output *ListFacetNamesOutput)
ListFacetNamesRequest generates a "aws/request.Request" representing the client's request for the ListFacetNames operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListFacetNames for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListFacetNames method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListFacetNamesRequest method. req, resp := client.ListFacetNamesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetNames
func (*CloudDirectory) ListIndex ¶
func (c *CloudDirectory) ListIndex(input *ListIndexInput) (*ListIndexOutput, error)
ListIndex API operation for Amazon CloudDirectory.
Lists objects attached to the specified index.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListIndex for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeNotIndexException "NotIndexException" Indicates the requested operation can only operate on index objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListIndex
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListIndexInput{ DirectoryArn: aws.String("Arn"), // Required IndexReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), RangesOnIndexedValues: []*clouddirectory.ObjectAttributeRange{ { // Required AttributeKey: &clouddirectory.AttributeKey{ FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, Range: &clouddirectory.TypedAttributeValueRange{ EndMode: aws.String("RangeMode"), // Required StartMode: aws.String("RangeMode"), // Required EndValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, StartValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, }, // More values... }, } resp, err := svc.ListIndex(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListIndexPages ¶
func (c *CloudDirectory) ListIndexPages(input *ListIndexInput, fn func(p *ListIndexOutput, lastPage bool) (shouldContinue bool)) error
ListIndexPages iterates over the pages of a ListIndex operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListIndex method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListIndex operation. pageNum := 0 err := client.ListIndexPages(params, func(page *ListIndexOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListIndexRequest ¶
func (c *CloudDirectory) ListIndexRequest(input *ListIndexInput) (req *request.Request, output *ListIndexOutput)
ListIndexRequest generates a "aws/request.Request" representing the client's request for the ListIndex operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListIndex for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListIndex method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListIndexRequest method. req, resp := client.ListIndexRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListIndex
func (*CloudDirectory) ListObjectAttributes ¶
func (c *CloudDirectory) ListObjectAttributes(input *ListObjectAttributesInput) (*ListObjectAttributesOutput, error)
ListObjectAttributes API operation for Amazon CloudDirectory.
Lists all attributes associated with an object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListObjectAttributes for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectAttributes
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListObjectAttributesInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListObjectAttributes(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListObjectAttributesPages ¶
func (c *CloudDirectory) ListObjectAttributesPages(input *ListObjectAttributesInput, fn func(p *ListObjectAttributesOutput, lastPage bool) (shouldContinue bool)) error
ListObjectAttributesPages iterates over the pages of a ListObjectAttributes operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListObjectAttributes method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListObjectAttributes operation. pageNum := 0 err := client.ListObjectAttributesPages(params, func(page *ListObjectAttributesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListObjectAttributesRequest ¶
func (c *CloudDirectory) ListObjectAttributesRequest(input *ListObjectAttributesInput) (req *request.Request, output *ListObjectAttributesOutput)
ListObjectAttributesRequest generates a "aws/request.Request" representing the client's request for the ListObjectAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListObjectAttributes for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListObjectAttributes method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListObjectAttributesRequest method. req, resp := client.ListObjectAttributesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectAttributes
func (*CloudDirectory) ListObjectChildren ¶
func (c *CloudDirectory) ListObjectChildren(input *ListObjectChildrenInput) (*ListObjectChildrenOutput, error)
ListObjectChildren API operation for Amazon CloudDirectory.
Returns a paginated list of child objects associated with a given object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListObjectChildren for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
ErrCodeNotNodeException "NotNodeException" Occurs when any invalid operations are performed on an object which is not a node, such as calling ListObjectChildren for a leaf node object.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectChildren
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListObjectChildrenInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListObjectChildren(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListObjectChildrenPages ¶
func (c *CloudDirectory) ListObjectChildrenPages(input *ListObjectChildrenInput, fn func(p *ListObjectChildrenOutput, lastPage bool) (shouldContinue bool)) error
ListObjectChildrenPages iterates over the pages of a ListObjectChildren operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListObjectChildren method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListObjectChildren operation. pageNum := 0 err := client.ListObjectChildrenPages(params, func(page *ListObjectChildrenOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListObjectChildrenRequest ¶
func (c *CloudDirectory) ListObjectChildrenRequest(input *ListObjectChildrenInput) (req *request.Request, output *ListObjectChildrenOutput)
ListObjectChildrenRequest generates a "aws/request.Request" representing the client's request for the ListObjectChildren operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListObjectChildren for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListObjectChildren method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListObjectChildrenRequest method. req, resp := client.ListObjectChildrenRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectChildren
func (*CloudDirectory) ListObjectParentPaths ¶ added in v1.7.8
func (c *CloudDirectory) ListObjectParentPaths(input *ListObjectParentPathsInput) (*ListObjectParentPathsOutput, error)
ListObjectParentPaths API operation for Amazon CloudDirectory.
Retrieves all available parent paths for any object type such as node, leaf node, policy node, and index node objects. For more information about objects, see Directory Structure (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_key_concepts.html#dirstructure).
Use this API to evaluate all parents for an object. The call returns all objects from the root of the directory up to the requested object. The API returns the number of paths based on user-defined MaxResults, in case there are multiple paths to the parent. The order of the paths and nodes returned is consistent among multiple API calls unless the objects are deleted or moved. Paths not leading to directory root are ignored from the target object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListObjectParentPaths for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentPaths
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListObjectParentPathsInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListObjectParentPaths(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListObjectParentPathsPages ¶ added in v1.7.8
func (c *CloudDirectory) ListObjectParentPathsPages(input *ListObjectParentPathsInput, fn func(p *ListObjectParentPathsOutput, lastPage bool) (shouldContinue bool)) error
ListObjectParentPathsPages iterates over the pages of a ListObjectParentPaths operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListObjectParentPaths method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListObjectParentPaths operation. pageNum := 0 err := client.ListObjectParentPathsPages(params, func(page *ListObjectParentPathsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListObjectParentPathsRequest ¶ added in v1.7.8
func (c *CloudDirectory) ListObjectParentPathsRequest(input *ListObjectParentPathsInput) (req *request.Request, output *ListObjectParentPathsOutput)
ListObjectParentPathsRequest generates a "aws/request.Request" representing the client's request for the ListObjectParentPaths operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListObjectParentPaths for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListObjectParentPaths method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListObjectParentPathsRequest method. req, resp := client.ListObjectParentPathsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentPaths
func (*CloudDirectory) ListObjectParents ¶
func (c *CloudDirectory) ListObjectParents(input *ListObjectParentsInput) (*ListObjectParentsOutput, error)
ListObjectParents API operation for Amazon CloudDirectory.
Lists parent objects associated with a given object in pagination fashion.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListObjectParents for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
ErrCodeCannotListParentOfRootException "CannotListParentOfRootException" Cannot list the parents of a Directory root.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParents
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListObjectParentsInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListObjectParents(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListObjectParentsPages ¶
func (c *CloudDirectory) ListObjectParentsPages(input *ListObjectParentsInput, fn func(p *ListObjectParentsOutput, lastPage bool) (shouldContinue bool)) error
ListObjectParentsPages iterates over the pages of a ListObjectParents operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListObjectParents method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListObjectParents operation. pageNum := 0 err := client.ListObjectParentsPages(params, func(page *ListObjectParentsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListObjectParentsRequest ¶
func (c *CloudDirectory) ListObjectParentsRequest(input *ListObjectParentsInput) (req *request.Request, output *ListObjectParentsOutput)
ListObjectParentsRequest generates a "aws/request.Request" representing the client's request for the ListObjectParents operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListObjectParents for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListObjectParents method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListObjectParentsRequest method. req, resp := client.ListObjectParentsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParents
func (*CloudDirectory) ListObjectPolicies ¶
func (c *CloudDirectory) ListObjectPolicies(input *ListObjectPoliciesInput) (*ListObjectPoliciesOutput, error)
ListObjectPolicies API operation for Amazon CloudDirectory.
Returns policies attached to an object in pagination fashion.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListObjectPolicies for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectPolicies
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListObjectPoliciesInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListObjectPolicies(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListObjectPoliciesPages ¶
func (c *CloudDirectory) ListObjectPoliciesPages(input *ListObjectPoliciesInput, fn func(p *ListObjectPoliciesOutput, lastPage bool) (shouldContinue bool)) error
ListObjectPoliciesPages iterates over the pages of a ListObjectPolicies operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListObjectPolicies method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListObjectPolicies operation. pageNum := 0 err := client.ListObjectPoliciesPages(params, func(page *ListObjectPoliciesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListObjectPoliciesRequest ¶
func (c *CloudDirectory) ListObjectPoliciesRequest(input *ListObjectPoliciesInput) (req *request.Request, output *ListObjectPoliciesOutput)
ListObjectPoliciesRequest generates a "aws/request.Request" representing the client's request for the ListObjectPolicies operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListObjectPolicies for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListObjectPolicies method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListObjectPoliciesRequest method. req, resp := client.ListObjectPoliciesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectPolicies
func (*CloudDirectory) ListPolicyAttachments ¶
func (c *CloudDirectory) ListPolicyAttachments(input *ListPolicyAttachmentsInput) (*ListPolicyAttachmentsOutput, error)
ListPolicyAttachments API operation for Amazon CloudDirectory.
Returns all of the ObjectIdentifiers to which a given policy is attached.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListPolicyAttachments for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeNotPolicyException "NotPolicyException" Indicates the requested operation can only operate on policy objects.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPolicyAttachments
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListPolicyAttachmentsInput{ DirectoryArn: aws.String("Arn"), // Required PolicyReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, ConsistencyLevel: aws.String("ConsistencyLevel"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListPolicyAttachments(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListPolicyAttachmentsPages ¶
func (c *CloudDirectory) ListPolicyAttachmentsPages(input *ListPolicyAttachmentsInput, fn func(p *ListPolicyAttachmentsOutput, lastPage bool) (shouldContinue bool)) error
ListPolicyAttachmentsPages iterates over the pages of a ListPolicyAttachments operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListPolicyAttachments method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListPolicyAttachments operation. pageNum := 0 err := client.ListPolicyAttachmentsPages(params, func(page *ListPolicyAttachmentsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListPolicyAttachmentsRequest ¶
func (c *CloudDirectory) ListPolicyAttachmentsRequest(input *ListPolicyAttachmentsInput) (req *request.Request, output *ListPolicyAttachmentsOutput)
ListPolicyAttachmentsRequest generates a "aws/request.Request" representing the client's request for the ListPolicyAttachments operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListPolicyAttachments for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListPolicyAttachments method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListPolicyAttachmentsRequest method. req, resp := client.ListPolicyAttachmentsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPolicyAttachments
func (*CloudDirectory) ListPublishedSchemaArns ¶
func (c *CloudDirectory) ListPublishedSchemaArns(input *ListPublishedSchemaArnsInput) (*ListPublishedSchemaArnsOutput, error)
ListPublishedSchemaArns API operation for Amazon CloudDirectory.
Retrieves published schema ARNs.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListPublishedSchemaArns for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPublishedSchemaArns
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListPublishedSchemaArnsInput{ MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListPublishedSchemaArns(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListPublishedSchemaArnsPages ¶
func (c *CloudDirectory) ListPublishedSchemaArnsPages(input *ListPublishedSchemaArnsInput, fn func(p *ListPublishedSchemaArnsOutput, lastPage bool) (shouldContinue bool)) error
ListPublishedSchemaArnsPages iterates over the pages of a ListPublishedSchemaArns operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListPublishedSchemaArns method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListPublishedSchemaArns operation. pageNum := 0 err := client.ListPublishedSchemaArnsPages(params, func(page *ListPublishedSchemaArnsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListPublishedSchemaArnsRequest ¶
func (c *CloudDirectory) ListPublishedSchemaArnsRequest(input *ListPublishedSchemaArnsInput) (req *request.Request, output *ListPublishedSchemaArnsOutput)
ListPublishedSchemaArnsRequest generates a "aws/request.Request" representing the client's request for the ListPublishedSchemaArns operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListPublishedSchemaArns for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListPublishedSchemaArns method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListPublishedSchemaArnsRequest method. req, resp := client.ListPublishedSchemaArnsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPublishedSchemaArns
func (*CloudDirectory) ListTagsForResource ¶
func (c *CloudDirectory) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)
ListTagsForResource API operation for Amazon CloudDirectory.
Returns tags for a resource. Tagging is currently supported only for directories with a limit of 50 tags per directory. All 50 tags are returned for a given directory with this API call.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation ListTagsForResource for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidTaggingRequestException "InvalidTaggingRequestException" Can occur for multiple reasons such as when you tag a resource that doesn’t exist or if you specify a higher number of tags for a resource than the allowed limit. Allowed limit is 50 tags per resource.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListTagsForResource
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.ListTagsForResourceInput{ ResourceArn: aws.String("Arn"), // Required MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListTagsForResource(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) ListTagsForResourcePages ¶
func (c *CloudDirectory) ListTagsForResourcePages(input *ListTagsForResourceInput, fn func(p *ListTagsForResourceOutput, lastPage bool) (shouldContinue bool)) error
ListTagsForResourcePages iterates over the pages of a ListTagsForResource operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListTagsForResource method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListTagsForResource operation. pageNum := 0 err := client.ListTagsForResourcePages(params, func(page *ListTagsForResourceOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) ListTagsForResourceRequest ¶
func (c *CloudDirectory) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)
ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListTagsForResource for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResource method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListTagsForResourceRequest method. req, resp := client.ListTagsForResourceRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListTagsForResource
func (*CloudDirectory) LookupPolicy ¶
func (c *CloudDirectory) LookupPolicy(input *LookupPolicyInput) (*LookupPolicyOutput, error)
LookupPolicy API operation for Amazon CloudDirectory.
Lists all policies from the root of the Directory to the object specified. If there are no policies present, an empty list is returned. If policies are present, and if some objects don't have the policies attached, it returns the ObjectIdentifier for such objects. If policies are present, it returns ObjectIdentifier, policyId, and policyType. Paths that don't lead to the root from the target object are ignored.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation LookupPolicy for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeInvalidNextTokenException "InvalidNextTokenException" Indicates that the NextToken value is not valid.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/LookupPolicy
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.LookupPolicyInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.LookupPolicy(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) LookupPolicyPages ¶
func (c *CloudDirectory) LookupPolicyPages(input *LookupPolicyInput, fn func(p *LookupPolicyOutput, lastPage bool) (shouldContinue bool)) error
LookupPolicyPages iterates over the pages of a LookupPolicy operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See LookupPolicy method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a LookupPolicy operation. pageNum := 0 err := client.LookupPolicyPages(params, func(page *LookupPolicyOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*CloudDirectory) LookupPolicyRequest ¶
func (c *CloudDirectory) LookupPolicyRequest(input *LookupPolicyInput) (req *request.Request, output *LookupPolicyOutput)
LookupPolicyRequest generates a "aws/request.Request" representing the client's request for the LookupPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See LookupPolicy for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the LookupPolicy method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the LookupPolicyRequest method. req, resp := client.LookupPolicyRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/LookupPolicy
func (*CloudDirectory) PublishSchema ¶
func (c *CloudDirectory) PublishSchema(input *PublishSchemaInput) (*PublishSchemaOutput, error)
PublishSchema API operation for Amazon CloudDirectory.
Publishes a development schema with a version. If description and attributes are specified, PublishSchema overrides the development schema description and attributes. If not, the development schema description and attributes are used.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation PublishSchema for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeSchemaAlreadyPublishedException "SchemaAlreadyPublishedException" Indicates a schema is already published.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PublishSchema
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.PublishSchemaInput{ DevelopmentSchemaArn: aws.String("Arn"), // Required Version: aws.String("Version"), // Required Name: aws.String("SchemaName"), } resp, err := svc.PublishSchema(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) PublishSchemaRequest ¶
func (c *CloudDirectory) PublishSchemaRequest(input *PublishSchemaInput) (req *request.Request, output *PublishSchemaOutput)
PublishSchemaRequest generates a "aws/request.Request" representing the client's request for the PublishSchema operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See PublishSchema for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PublishSchema method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PublishSchemaRequest method. req, resp := client.PublishSchemaRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PublishSchema
func (*CloudDirectory) PutSchemaFromJson ¶
func (c *CloudDirectory) PutSchemaFromJson(input *PutSchemaFromJsonInput) (*PutSchemaFromJsonOutput, error)
PutSchemaFromJson API operation for Amazon CloudDirectory.
Allows a schema to be updated using JSON upload. Only available for development schemas. See JSON Schema Format (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_schemas.html#jsonformat) for more information.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation PutSchemaFromJson for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeInvalidSchemaDocException "InvalidSchemaDocException" Indicates that the provided SchemaDoc value is not valid.
ErrCodeInvalidRuleException "InvalidRuleException" Occurs when any of the rule parameter keys or values are invalid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PutSchemaFromJson
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.PutSchemaFromJsonInput{ Document: aws.String("SchemaJsonDocument"), // Required SchemaArn: aws.String("Arn"), // Required } resp, err := svc.PutSchemaFromJson(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) PutSchemaFromJsonRequest ¶
func (c *CloudDirectory) PutSchemaFromJsonRequest(input *PutSchemaFromJsonInput) (req *request.Request, output *PutSchemaFromJsonOutput)
PutSchemaFromJsonRequest generates a "aws/request.Request" representing the client's request for the PutSchemaFromJson operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See PutSchemaFromJson for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutSchemaFromJson method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutSchemaFromJsonRequest method. req, resp := client.PutSchemaFromJsonRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PutSchemaFromJson
func (*CloudDirectory) RemoveFacetFromObject ¶
func (c *CloudDirectory) RemoveFacetFromObject(input *RemoveFacetFromObjectInput) (*RemoveFacetFromObjectOutput, error)
RemoveFacetFromObject API operation for Amazon CloudDirectory.
Removes the specified facet from the specified object.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation RemoveFacetFromObject for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetValidationException "FacetValidationException" The Facet you provided was not well formed or could not be validated with the schema.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/RemoveFacetFromObject
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.RemoveFacetFromObjectInput{ DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, SchemaFacet: &clouddirectory.SchemaFacet{ // Required FacetName: aws.String("FacetName"), SchemaArn: aws.String("Arn"), }, } resp, err := svc.RemoveFacetFromObject(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) RemoveFacetFromObjectRequest ¶
func (c *CloudDirectory) RemoveFacetFromObjectRequest(input *RemoveFacetFromObjectInput) (req *request.Request, output *RemoveFacetFromObjectOutput)
RemoveFacetFromObjectRequest generates a "aws/request.Request" representing the client's request for the RemoveFacetFromObject operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See RemoveFacetFromObject for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RemoveFacetFromObject method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RemoveFacetFromObjectRequest method. req, resp := client.RemoveFacetFromObjectRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/RemoveFacetFromObject
func (*CloudDirectory) TagResource ¶
func (c *CloudDirectory) TagResource(input *TagResourceInput) (*TagResourceOutput, error)
TagResource API operation for Amazon CloudDirectory.
API for adding tags to a resource.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation TagResource for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidTaggingRequestException "InvalidTaggingRequestException" Can occur for multiple reasons such as when you tag a resource that doesn’t exist or if you specify a higher number of tags for a resource than the allowed limit. Allowed limit is 50 tags per resource.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TagResource
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.TagResourceInput{ ResourceArn: aws.String("Arn"), // Required Tags: []*clouddirectory.Tag{ // Required { // Required Key: aws.String("TagKey"), Value: aws.String("TagValue"), }, // More values... }, } resp, err := svc.TagResource(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) TagResourceRequest ¶
func (c *CloudDirectory) TagResourceRequest(input *TagResourceInput) (req *request.Request, output *TagResourceOutput)
TagResourceRequest generates a "aws/request.Request" representing the client's request for the TagResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See TagResource for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TagResource method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the TagResourceRequest method. req, resp := client.TagResourceRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TagResource
func (*CloudDirectory) UntagResource ¶
func (c *CloudDirectory) UntagResource(input *UntagResourceInput) (*UntagResourceOutput, error)
UntagResource API operation for Amazon CloudDirectory.
API for removing tags from a resource.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation UntagResource for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeInvalidTaggingRequestException "InvalidTaggingRequestException" Can occur for multiple reasons such as when you tag a resource that doesn’t exist or if you specify a higher number of tags for a resource than the allowed limit. Allowed limit is 50 tags per resource.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UntagResource
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.UntagResourceInput{ ResourceArn: aws.String("Arn"), // Required TagKeys: []*string{ // Required aws.String("TagKey"), // Required // More values... }, } resp, err := svc.UntagResource(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) UntagResourceRequest ¶
func (c *CloudDirectory) UntagResourceRequest(input *UntagResourceInput) (req *request.Request, output *UntagResourceOutput)
UntagResourceRequest generates a "aws/request.Request" representing the client's request for the UntagResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See UntagResource for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UntagResource method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UntagResourceRequest method. req, resp := client.UntagResourceRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UntagResource
func (*CloudDirectory) UpdateFacet ¶
func (c *CloudDirectory) UpdateFacet(input *UpdateFacetInput) (*UpdateFacetOutput, error)
UpdateFacet API operation for Amazon CloudDirectory.
Does the following:
Adds new Attributes, Rules, or ObjectTypes.
Updates existing Attributes, Rules, or ObjectTypes.
Deletes existing Attributes, Rules, or ObjectTypes.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation UpdateFacet for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeInvalidFacetUpdateException "InvalidFacetUpdateException" An attempt to modify a Facet resulted in an invalid schema exception.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetNotFoundException "FacetNotFoundException" The specified Facet could not be found.
ErrCodeInvalidRuleException "InvalidRuleException" Occurs when any of the rule parameter keys or values are invalid.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateFacet
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.UpdateFacetInput{ Name: aws.String("FacetName"), // Required SchemaArn: aws.String("Arn"), // Required AttributeUpdates: []*clouddirectory.FacetAttributeUpdate{ { // Required Action: aws.String("UpdateActionType"), Attribute: &clouddirectory.FacetAttribute{ Name: aws.String("AttributeName"), // Required AttributeDefinition: &clouddirectory.FacetAttributeDefinition{ Type: aws.String("FacetAttributeType"), // Required DefaultValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, IsImmutable: aws.Bool(true), Rules: map[string]*clouddirectory.Rule{ "Key": { // Required Parameters: map[string]*string{ "Key": aws.String("RuleParameterValue"), // Required // More values... }, Type: aws.String("RuleType"), }, // More values... }, }, AttributeReference: &clouddirectory.FacetAttributeReference{ TargetAttributeName: aws.String("AttributeName"), // Required TargetFacetName: aws.String("FacetName"), // Required }, RequiredBehavior: aws.String("RequiredAttributeBehavior"), }, }, // More values... }, ObjectType: aws.String("ObjectType"), } resp, err := svc.UpdateFacet(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) UpdateFacetRequest ¶
func (c *CloudDirectory) UpdateFacetRequest(input *UpdateFacetInput) (req *request.Request, output *UpdateFacetOutput)
UpdateFacetRequest generates a "aws/request.Request" representing the client's request for the UpdateFacet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See UpdateFacet for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateFacet method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateFacetRequest method. req, resp := client.UpdateFacetRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateFacet
func (*CloudDirectory) UpdateObjectAttributes ¶
func (c *CloudDirectory) UpdateObjectAttributes(input *UpdateObjectAttributesInput) (*UpdateObjectAttributesOutput, error)
UpdateObjectAttributes API operation for Amazon CloudDirectory.
Updates a given object's attributes.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation UpdateObjectAttributes for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeDirectoryNotEnabledException "DirectoryNotEnabledException" An operation can only operate on a directory that is not enabled.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
ErrCodeFacetValidationException "FacetValidationException" The Facet you provided was not well formed or could not be validated with the schema.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateObjectAttributes
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.UpdateObjectAttributesInput{ AttributeUpdates: []*clouddirectory.ObjectAttributeUpdate{ // Required { // Required ObjectAttributeAction: &clouddirectory.ObjectAttributeAction{ ObjectAttributeActionType: aws.String("UpdateActionType"), ObjectAttributeUpdateValue: &clouddirectory.TypedAttributeValue{ BinaryValue: []byte("PAYLOAD"), BooleanValue: aws.Bool(true), DatetimeValue: aws.Time(time.Now()), NumberValue: aws.String("NumberAttributeValue"), StringValue: aws.String("StringAttributeValue"), }, }, ObjectAttributeKey: &clouddirectory.AttributeKey{ FacetName: aws.String("FacetName"), // Required Name: aws.String("AttributeName"), // Required SchemaArn: aws.String("Arn"), // Required }, }, // More values... }, DirectoryArn: aws.String("Arn"), // Required ObjectReference: &clouddirectory.ObjectReference{ // Required Selector: aws.String("SelectorObjectReference"), }, } resp, err := svc.UpdateObjectAttributes(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) UpdateObjectAttributesRequest ¶
func (c *CloudDirectory) UpdateObjectAttributesRequest(input *UpdateObjectAttributesInput) (req *request.Request, output *UpdateObjectAttributesOutput)
UpdateObjectAttributesRequest generates a "aws/request.Request" representing the client's request for the UpdateObjectAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See UpdateObjectAttributes for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateObjectAttributes method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateObjectAttributesRequest method. req, resp := client.UpdateObjectAttributesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateObjectAttributes
func (*CloudDirectory) UpdateSchema ¶
func (c *CloudDirectory) UpdateSchema(input *UpdateSchemaInput) (*UpdateSchemaOutput, error)
UpdateSchema API operation for Amazon CloudDirectory.
Updates the schema name with a new name. Only development schema names can be updated.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for Amazon CloudDirectory's API operation UpdateSchema for usage and error information.
Returned Error Codes:
ErrCodeInternalServiceException "InternalServiceException" Indicates a problem that must be resolved by Amazon Web Services. This might be a transient error in which case you can retry your request until it succeeds. Otherwise, go to the AWS Service Health Dashboard (http://status.aws.amazon.com/) site to see if there are any operational issues with the service.
ErrCodeInvalidArnException "InvalidArnException" Indicates that the provided ARN value is not valid.
ErrCodeRetryableConflictException "RetryableConflictException" Occurs when a conflict with a previous successful write is detected. For example, if a write operation occurs on an object and then an attempt is made to read the object using “SERIALIZABLE” consistency, this exception may result. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.
ErrCodeValidationException "ValidationException" Indicates your request is malformed in some manner. See the exception message.
ErrCodeLimitExceededException "LimitExceededException" Indicates limits are exceeded. See Limits (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/limits.html) for more information.
ErrCodeAccessDeniedException "AccessDeniedException" Access denied. Check your permissions.
ErrCodeResourceNotFoundException "ResourceNotFoundException" The specified resource could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateSchema
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/clouddirectory" ) func main() { sess := session.Must(session.NewSession()) svc := clouddirectory.New(sess) params := &clouddirectory.UpdateSchemaInput{ Name: aws.String("SchemaName"), // Required SchemaArn: aws.String("Arn"), // Required } resp, err := svc.UpdateSchema(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*CloudDirectory) UpdateSchemaRequest ¶
func (c *CloudDirectory) UpdateSchemaRequest(input *UpdateSchemaInput) (req *request.Request, output *UpdateSchemaOutput)
UpdateSchemaRequest generates a "aws/request.Request" representing the client's request for the UpdateSchema operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See UpdateSchema for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateSchema method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateSchemaRequest method. req, resp := client.UpdateSchemaRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateSchema
type CreateDirectoryInput ¶
type CreateDirectoryInput struct { // Name of the Directory. Should be unique per account, per region. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // ARN of the published schema that will be copied into the data Directory. // For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateDirectoryRequest
func (CreateDirectoryInput) GoString ¶
func (s CreateDirectoryInput) GoString() string
GoString returns the string representation
func (*CreateDirectoryInput) SetName ¶
func (s *CreateDirectoryInput) SetName(v string) *CreateDirectoryInput
SetName sets the Name field's value.
func (*CreateDirectoryInput) SetSchemaArn ¶
func (s *CreateDirectoryInput) SetSchemaArn(v string) *CreateDirectoryInput
SetSchemaArn sets the SchemaArn field's value.
func (CreateDirectoryInput) String ¶
func (s CreateDirectoryInput) String() string
String returns the string representation
func (*CreateDirectoryInput) Validate ¶
func (s *CreateDirectoryInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateDirectoryOutput ¶
type CreateDirectoryOutput struct { // ARN of the published schema in the Directory. Once a published schema is // copied into the directory, it has its own ARN which is referred to applied // schema ARN. For more information, see arns. // // AppliedSchemaArn is a required field AppliedSchemaArn *string `type:"string" required:"true"` // ARN associated with the Directory. For more information, see arns. // // DirectoryArn is a required field DirectoryArn *string `type:"string" required:"true"` // Name of the Directory. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // The root object node of the created directory. // // ObjectIdentifier is a required field ObjectIdentifier *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateDirectoryResponse
func (CreateDirectoryOutput) GoString ¶
func (s CreateDirectoryOutput) GoString() string
GoString returns the string representation
func (*CreateDirectoryOutput) SetAppliedSchemaArn ¶
func (s *CreateDirectoryOutput) SetAppliedSchemaArn(v string) *CreateDirectoryOutput
SetAppliedSchemaArn sets the AppliedSchemaArn field's value.
func (*CreateDirectoryOutput) SetDirectoryArn ¶
func (s *CreateDirectoryOutput) SetDirectoryArn(v string) *CreateDirectoryOutput
SetDirectoryArn sets the DirectoryArn field's value.
func (*CreateDirectoryOutput) SetName ¶
func (s *CreateDirectoryOutput) SetName(v string) *CreateDirectoryOutput
SetName sets the Name field's value.
func (*CreateDirectoryOutput) SetObjectIdentifier ¶
func (s *CreateDirectoryOutput) SetObjectIdentifier(v string) *CreateDirectoryOutput
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (CreateDirectoryOutput) String ¶
func (s CreateDirectoryOutput) String() string
String returns the string representation
type CreateFacetInput ¶
type CreateFacetInput struct { // Attributes associated with the Facet.e Attributes []*FacetAttribute `type:"list"` // Name of the Facet, which is unique for a given schema. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // Specifies whether a given object created from this facet is of type Node, // Leaf Node, Policy or Index. // // * Node: Can have multiple children but one parent. // // * Leaf Node: Cannot have children but can have multiple parents. // // * Policy: Allows you to store a policy document and policy type. For more // information, see Policies (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_key_concepts.html#policies). // // * Index: Can be created with the Index API. // // ObjectType is a required field ObjectType *string `type:"string" required:"true" enum:"ObjectType"` // Schema ARN in which the new Facet will be created. For more information, // see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateFacetRequest
func (CreateFacetInput) GoString ¶
func (s CreateFacetInput) GoString() string
GoString returns the string representation
func (*CreateFacetInput) SetAttributes ¶
func (s *CreateFacetInput) SetAttributes(v []*FacetAttribute) *CreateFacetInput
SetAttributes sets the Attributes field's value.
func (*CreateFacetInput) SetName ¶
func (s *CreateFacetInput) SetName(v string) *CreateFacetInput
SetName sets the Name field's value.
func (*CreateFacetInput) SetObjectType ¶
func (s *CreateFacetInput) SetObjectType(v string) *CreateFacetInput
SetObjectType sets the ObjectType field's value.
func (*CreateFacetInput) SetSchemaArn ¶
func (s *CreateFacetInput) SetSchemaArn(v string) *CreateFacetInput
SetSchemaArn sets the SchemaArn field's value.
func (CreateFacetInput) String ¶
func (s CreateFacetInput) String() string
String returns the string representation
func (*CreateFacetInput) Validate ¶
func (s *CreateFacetInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateFacetOutput ¶
type CreateFacetOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateFacetResponse
func (CreateFacetOutput) GoString ¶
func (s CreateFacetOutput) GoString() string
GoString returns the string representation
func (CreateFacetOutput) String ¶
func (s CreateFacetOutput) String() string
String returns the string representation
type CreateIndexInput ¶
type CreateIndexInput struct { // The ARN of the directory where the index should be created. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Indicates whether objects with the same indexed attribute value can be added // to the index. // // IsUnique is a required field IsUnique *bool `type:"boolean" required:"true"` // The name of the link between the parent object and the index object. LinkName *string `type:"string"` // Specifies the Attributes that should be indexed on. Currently only a single // attribute is supported. // // OrderedIndexedAttributeList is a required field OrderedIndexedAttributeList []*AttributeKey `type:"list" required:"true"` // A reference to the parent object that contains the index object. ParentReference *ObjectReference `type:"structure"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateIndexRequest
func (CreateIndexInput) GoString ¶
func (s CreateIndexInput) GoString() string
GoString returns the string representation
func (*CreateIndexInput) SetDirectoryArn ¶
func (s *CreateIndexInput) SetDirectoryArn(v string) *CreateIndexInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*CreateIndexInput) SetIsUnique ¶
func (s *CreateIndexInput) SetIsUnique(v bool) *CreateIndexInput
SetIsUnique sets the IsUnique field's value.
func (*CreateIndexInput) SetLinkName ¶
func (s *CreateIndexInput) SetLinkName(v string) *CreateIndexInput
SetLinkName sets the LinkName field's value.
func (*CreateIndexInput) SetOrderedIndexedAttributeList ¶
func (s *CreateIndexInput) SetOrderedIndexedAttributeList(v []*AttributeKey) *CreateIndexInput
SetOrderedIndexedAttributeList sets the OrderedIndexedAttributeList field's value.
func (*CreateIndexInput) SetParentReference ¶
func (s *CreateIndexInput) SetParentReference(v *ObjectReference) *CreateIndexInput
SetParentReference sets the ParentReference field's value.
func (CreateIndexInput) String ¶
func (s CreateIndexInput) String() string
String returns the string representation
func (*CreateIndexInput) Validate ¶
func (s *CreateIndexInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateIndexOutput ¶
type CreateIndexOutput struct { // The ObjectIdentifier of the index created by this operation. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateIndexResponse
func (CreateIndexOutput) GoString ¶
func (s CreateIndexOutput) GoString() string
GoString returns the string representation
func (*CreateIndexOutput) SetObjectIdentifier ¶
func (s *CreateIndexOutput) SetObjectIdentifier(v string) *CreateIndexOutput
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (CreateIndexOutput) String ¶
func (s CreateIndexOutput) String() string
String returns the string representation
type CreateObjectInput ¶
type CreateObjectInput struct { // ARN associated with the Directory in which the object will be created. For // more information, see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // The name of link that is used to attach this object to a parent. LinkName *string `type:"string"` // Attribute map whose attribute ARN contains the key and attribute value as // the map value. ObjectAttributeList []*AttributeKeyAndValue `type:"list"` // If specified, the parent reference to which this object will be attached. ParentReference *ObjectReference `type:"structure"` // List of facet ARNs to be associated with the object. For more information, // see arns. // // SchemaFacets is a required field SchemaFacets []*SchemaFacet `type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateObjectRequest
func (CreateObjectInput) GoString ¶
func (s CreateObjectInput) GoString() string
GoString returns the string representation
func (*CreateObjectInput) SetDirectoryArn ¶
func (s *CreateObjectInput) SetDirectoryArn(v string) *CreateObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*CreateObjectInput) SetLinkName ¶
func (s *CreateObjectInput) SetLinkName(v string) *CreateObjectInput
SetLinkName sets the LinkName field's value.
func (*CreateObjectInput) SetObjectAttributeList ¶
func (s *CreateObjectInput) SetObjectAttributeList(v []*AttributeKeyAndValue) *CreateObjectInput
SetObjectAttributeList sets the ObjectAttributeList field's value.
func (*CreateObjectInput) SetParentReference ¶
func (s *CreateObjectInput) SetParentReference(v *ObjectReference) *CreateObjectInput
SetParentReference sets the ParentReference field's value.
func (*CreateObjectInput) SetSchemaFacets ¶
func (s *CreateObjectInput) SetSchemaFacets(v []*SchemaFacet) *CreateObjectInput
SetSchemaFacets sets the SchemaFacets field's value.
func (CreateObjectInput) String ¶
func (s CreateObjectInput) String() string
String returns the string representation
func (*CreateObjectInput) Validate ¶
func (s *CreateObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateObjectOutput ¶
type CreateObjectOutput struct { // Identifier associated with the object. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateObjectResponse
func (CreateObjectOutput) GoString ¶
func (s CreateObjectOutput) GoString() string
GoString returns the string representation
func (*CreateObjectOutput) SetObjectIdentifier ¶
func (s *CreateObjectOutput) SetObjectIdentifier(v string) *CreateObjectOutput
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (CreateObjectOutput) String ¶
func (s CreateObjectOutput) String() string
String returns the string representation
type CreateSchemaInput ¶
type CreateSchemaInput struct { // Name associated with the schema. This is unique to each account and in each // region. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateSchemaRequest
func (CreateSchemaInput) GoString ¶
func (s CreateSchemaInput) GoString() string
GoString returns the string representation
func (*CreateSchemaInput) SetName ¶
func (s *CreateSchemaInput) SetName(v string) *CreateSchemaInput
SetName sets the Name field's value.
func (CreateSchemaInput) String ¶
func (s CreateSchemaInput) String() string
String returns the string representation
func (*CreateSchemaInput) Validate ¶
func (s *CreateSchemaInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateSchemaOutput ¶
type CreateSchemaOutput struct { // ARN associated with the schema. For more information, see arns. SchemaArn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/CreateSchemaResponse
func (CreateSchemaOutput) GoString ¶
func (s CreateSchemaOutput) GoString() string
GoString returns the string representation
func (*CreateSchemaOutput) SetSchemaArn ¶
func (s *CreateSchemaOutput) SetSchemaArn(v string) *CreateSchemaOutput
SetSchemaArn sets the SchemaArn field's value.
func (CreateSchemaOutput) String ¶
func (s CreateSchemaOutput) String() string
String returns the string representation
type DeleteDirectoryInput ¶
type DeleteDirectoryInput struct { // The ARN of the directory to delete. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteDirectoryRequest
func (DeleteDirectoryInput) GoString ¶
func (s DeleteDirectoryInput) GoString() string
GoString returns the string representation
func (*DeleteDirectoryInput) SetDirectoryArn ¶
func (s *DeleteDirectoryInput) SetDirectoryArn(v string) *DeleteDirectoryInput
SetDirectoryArn sets the DirectoryArn field's value.
func (DeleteDirectoryInput) String ¶
func (s DeleteDirectoryInput) String() string
String returns the string representation
func (*DeleteDirectoryInput) Validate ¶
func (s *DeleteDirectoryInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteDirectoryOutput ¶
type DeleteDirectoryOutput struct { // The ARN of the deleted directory. // // DirectoryArn is a required field DirectoryArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteDirectoryResponse
func (DeleteDirectoryOutput) GoString ¶
func (s DeleteDirectoryOutput) GoString() string
GoString returns the string representation
func (*DeleteDirectoryOutput) SetDirectoryArn ¶
func (s *DeleteDirectoryOutput) SetDirectoryArn(v string) *DeleteDirectoryOutput
SetDirectoryArn sets the DirectoryArn field's value.
func (DeleteDirectoryOutput) String ¶
func (s DeleteDirectoryOutput) String() string
String returns the string representation
type DeleteFacetInput ¶
type DeleteFacetInput struct { // The name of the facet to delete. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // ARN associated with the Facet. For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteFacetRequest
func (DeleteFacetInput) GoString ¶
func (s DeleteFacetInput) GoString() string
GoString returns the string representation
func (*DeleteFacetInput) SetName ¶
func (s *DeleteFacetInput) SetName(v string) *DeleteFacetInput
SetName sets the Name field's value.
func (*DeleteFacetInput) SetSchemaArn ¶
func (s *DeleteFacetInput) SetSchemaArn(v string) *DeleteFacetInput
SetSchemaArn sets the SchemaArn field's value.
func (DeleteFacetInput) String ¶
func (s DeleteFacetInput) String() string
String returns the string representation
func (*DeleteFacetInput) Validate ¶
func (s *DeleteFacetInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteFacetOutput ¶
type DeleteFacetOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteFacetResponse
func (DeleteFacetOutput) GoString ¶
func (s DeleteFacetOutput) GoString() string
GoString returns the string representation
func (DeleteFacetOutput) String ¶
func (s DeleteFacetOutput) String() string
String returns the string representation
type DeleteObjectInput ¶
type DeleteObjectInput struct { // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Reference that identifies the object. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteObjectRequest
func (DeleteObjectInput) GoString ¶
func (s DeleteObjectInput) GoString() string
GoString returns the string representation
func (*DeleteObjectInput) SetDirectoryArn ¶
func (s *DeleteObjectInput) SetDirectoryArn(v string) *DeleteObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*DeleteObjectInput) SetObjectReference ¶
func (s *DeleteObjectInput) SetObjectReference(v *ObjectReference) *DeleteObjectInput
SetObjectReference sets the ObjectReference field's value.
func (DeleteObjectInput) String ¶
func (s DeleteObjectInput) String() string
String returns the string representation
func (*DeleteObjectInput) Validate ¶
func (s *DeleteObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteObjectOutput ¶
type DeleteObjectOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteObjectResponse
func (DeleteObjectOutput) GoString ¶
func (s DeleteObjectOutput) GoString() string
GoString returns the string representation
func (DeleteObjectOutput) String ¶
func (s DeleteObjectOutput) String() string
String returns the string representation
type DeleteSchemaInput ¶
type DeleteSchemaInput struct { // ARN of the development schema. For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteSchemaRequest
func (DeleteSchemaInput) GoString ¶
func (s DeleteSchemaInput) GoString() string
GoString returns the string representation
func (*DeleteSchemaInput) SetSchemaArn ¶
func (s *DeleteSchemaInput) SetSchemaArn(v string) *DeleteSchemaInput
SetSchemaArn sets the SchemaArn field's value.
func (DeleteSchemaInput) String ¶
func (s DeleteSchemaInput) String() string
String returns the string representation
func (*DeleteSchemaInput) Validate ¶
func (s *DeleteSchemaInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteSchemaOutput ¶
type DeleteSchemaOutput struct { // Input ARN that is returned as part of the response. For more information, // see arns. SchemaArn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DeleteSchemaResponse
func (DeleteSchemaOutput) GoString ¶
func (s DeleteSchemaOutput) GoString() string
GoString returns the string representation
func (*DeleteSchemaOutput) SetSchemaArn ¶
func (s *DeleteSchemaOutput) SetSchemaArn(v string) *DeleteSchemaOutput
SetSchemaArn sets the SchemaArn field's value.
func (DeleteSchemaOutput) String ¶
func (s DeleteSchemaOutput) String() string
String returns the string representation
type DetachFromIndexInput ¶
type DetachFromIndexInput struct { // The ARN of the directory the index and object exist in. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // A reference to the index object. // // IndexReference is a required field IndexReference *ObjectReference `type:"structure" required:"true"` // A reference to the object being detached from the index. // // TargetReference is a required field TargetReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachFromIndexRequest
func (DetachFromIndexInput) GoString ¶
func (s DetachFromIndexInput) GoString() string
GoString returns the string representation
func (*DetachFromIndexInput) SetDirectoryArn ¶
func (s *DetachFromIndexInput) SetDirectoryArn(v string) *DetachFromIndexInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*DetachFromIndexInput) SetIndexReference ¶
func (s *DetachFromIndexInput) SetIndexReference(v *ObjectReference) *DetachFromIndexInput
SetIndexReference sets the IndexReference field's value.
func (*DetachFromIndexInput) SetTargetReference ¶
func (s *DetachFromIndexInput) SetTargetReference(v *ObjectReference) *DetachFromIndexInput
SetTargetReference sets the TargetReference field's value.
func (DetachFromIndexInput) String ¶
func (s DetachFromIndexInput) String() string
String returns the string representation
func (*DetachFromIndexInput) Validate ¶
func (s *DetachFromIndexInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DetachFromIndexOutput ¶
type DetachFromIndexOutput struct { // The ObjectIdentifier of the object that was detached from the index. DetachedObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachFromIndexResponse
func (DetachFromIndexOutput) GoString ¶
func (s DetachFromIndexOutput) GoString() string
GoString returns the string representation
func (*DetachFromIndexOutput) SetDetachedObjectIdentifier ¶
func (s *DetachFromIndexOutput) SetDetachedObjectIdentifier(v string) *DetachFromIndexOutput
SetDetachedObjectIdentifier sets the DetachedObjectIdentifier field's value.
func (DetachFromIndexOutput) String ¶
func (s DetachFromIndexOutput) String() string
String returns the string representation
type DetachObjectInput ¶
type DetachObjectInput struct { // ARN associated with the Directory where objects reside. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Link name associated with the object that needs to be detached. // // LinkName is a required field LinkName *string `type:"string" required:"true"` // Parent reference from which the object with the specified link name is detached. // // ParentReference is a required field ParentReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachObjectRequest
func (DetachObjectInput) GoString ¶
func (s DetachObjectInput) GoString() string
GoString returns the string representation
func (*DetachObjectInput) SetDirectoryArn ¶
func (s *DetachObjectInput) SetDirectoryArn(v string) *DetachObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*DetachObjectInput) SetLinkName ¶
func (s *DetachObjectInput) SetLinkName(v string) *DetachObjectInput
SetLinkName sets the LinkName field's value.
func (*DetachObjectInput) SetParentReference ¶
func (s *DetachObjectInput) SetParentReference(v *ObjectReference) *DetachObjectInput
SetParentReference sets the ParentReference field's value.
func (DetachObjectInput) String ¶
func (s DetachObjectInput) String() string
String returns the string representation
func (*DetachObjectInput) Validate ¶
func (s *DetachObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DetachObjectOutput ¶
type DetachObjectOutput struct { // The ObjectIdentifier that was detached from the object. DetachedObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachObjectResponse
func (DetachObjectOutput) GoString ¶
func (s DetachObjectOutput) GoString() string
GoString returns the string representation
func (*DetachObjectOutput) SetDetachedObjectIdentifier ¶
func (s *DetachObjectOutput) SetDetachedObjectIdentifier(v string) *DetachObjectOutput
SetDetachedObjectIdentifier sets the DetachedObjectIdentifier field's value.
func (DetachObjectOutput) String ¶
func (s DetachObjectOutput) String() string
String returns the string representation
type DetachPolicyInput ¶
type DetachPolicyInput struct { // ARN associated with the Directory where both objects reside. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Reference that identifies the object whose policy object will be detached. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // Reference that identifies the policy object. // // PolicyReference is a required field PolicyReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachPolicyRequest
func (DetachPolicyInput) GoString ¶
func (s DetachPolicyInput) GoString() string
GoString returns the string representation
func (*DetachPolicyInput) SetDirectoryArn ¶
func (s *DetachPolicyInput) SetDirectoryArn(v string) *DetachPolicyInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*DetachPolicyInput) SetObjectReference ¶
func (s *DetachPolicyInput) SetObjectReference(v *ObjectReference) *DetachPolicyInput
SetObjectReference sets the ObjectReference field's value.
func (*DetachPolicyInput) SetPolicyReference ¶
func (s *DetachPolicyInput) SetPolicyReference(v *ObjectReference) *DetachPolicyInput
SetPolicyReference sets the PolicyReference field's value.
func (DetachPolicyInput) String ¶
func (s DetachPolicyInput) String() string
String returns the string representation
func (*DetachPolicyInput) Validate ¶
func (s *DetachPolicyInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DetachPolicyOutput ¶
type DetachPolicyOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DetachPolicyResponse
func (DetachPolicyOutput) GoString ¶
func (s DetachPolicyOutput) GoString() string
GoString returns the string representation
func (DetachPolicyOutput) String ¶
func (s DetachPolicyOutput) String() string
String returns the string representation
type Directory ¶
type Directory struct { // The date and time when the directory was created. CreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix"` // ARN associated with the directory. For more information, see arns. DirectoryArn *string `type:"string"` // The name of the directory. Name *string `min:"1" type:"string"` // The state of the directory. Can be either Enabled, Disabled, or Deleted. State *string `type:"string" enum:"DirectoryState"` // contains filtered or unexported fields }
Directory structure that includes the directory name and directory ARN. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/Directory
func (*Directory) SetCreationDateTime ¶
SetCreationDateTime sets the CreationDateTime field's value.
func (*Directory) SetDirectoryArn ¶
SetDirectoryArn sets the DirectoryArn field's value.
type DisableDirectoryInput ¶
type DisableDirectoryInput struct { // The ARN of the directory to disable. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DisableDirectoryRequest
func (DisableDirectoryInput) GoString ¶
func (s DisableDirectoryInput) GoString() string
GoString returns the string representation
func (*DisableDirectoryInput) SetDirectoryArn ¶
func (s *DisableDirectoryInput) SetDirectoryArn(v string) *DisableDirectoryInput
SetDirectoryArn sets the DirectoryArn field's value.
func (DisableDirectoryInput) String ¶
func (s DisableDirectoryInput) String() string
String returns the string representation
func (*DisableDirectoryInput) Validate ¶
func (s *DisableDirectoryInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DisableDirectoryOutput ¶
type DisableDirectoryOutput struct { // The ARN of the directory that has been disabled. // // DirectoryArn is a required field DirectoryArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/DisableDirectoryResponse
func (DisableDirectoryOutput) GoString ¶
func (s DisableDirectoryOutput) GoString() string
GoString returns the string representation
func (*DisableDirectoryOutput) SetDirectoryArn ¶
func (s *DisableDirectoryOutput) SetDirectoryArn(v string) *DisableDirectoryOutput
SetDirectoryArn sets the DirectoryArn field's value.
func (DisableDirectoryOutput) String ¶
func (s DisableDirectoryOutput) String() string
String returns the string representation
type EnableDirectoryInput ¶
type EnableDirectoryInput struct { // The ARN of the directory to enable. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/EnableDirectoryRequest
func (EnableDirectoryInput) GoString ¶
func (s EnableDirectoryInput) GoString() string
GoString returns the string representation
func (*EnableDirectoryInput) SetDirectoryArn ¶
func (s *EnableDirectoryInput) SetDirectoryArn(v string) *EnableDirectoryInput
SetDirectoryArn sets the DirectoryArn field's value.
func (EnableDirectoryInput) String ¶
func (s EnableDirectoryInput) String() string
String returns the string representation
func (*EnableDirectoryInput) Validate ¶
func (s *EnableDirectoryInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type EnableDirectoryOutput ¶
type EnableDirectoryOutput struct { // The ARN of the enabled directory. // // DirectoryArn is a required field DirectoryArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/EnableDirectoryResponse
func (EnableDirectoryOutput) GoString ¶
func (s EnableDirectoryOutput) GoString() string
GoString returns the string representation
func (*EnableDirectoryOutput) SetDirectoryArn ¶
func (s *EnableDirectoryOutput) SetDirectoryArn(v string) *EnableDirectoryOutput
SetDirectoryArn sets the DirectoryArn field's value.
func (EnableDirectoryOutput) String ¶
func (s EnableDirectoryOutput) String() string
String returns the string representation
type Facet ¶
type Facet struct { // The name of the Facet. Name *string `min:"1" type:"string"` // Object type associated with the facet. See CreateFacetRequest$ObjectType // for more details. ObjectType *string `type:"string" enum:"ObjectType"` // contains filtered or unexported fields }
A structure that contains Name, ARN, Attributes, Rules, and ObjectTypes. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/Facet
func (*Facet) SetObjectType ¶
SetObjectType sets the ObjectType field's value.
type FacetAttribute ¶
type FacetAttribute struct { // A facet attribute consists of either a definition or a reference. This structure // contains the attribute definition. See Attribute References (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#attributereferences) // for more information. AttributeDefinition *FacetAttributeDefinition `type:"structure"` // Attribute reference associated with the attribute. See Attribute References // (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#attributereferences) // for more information. AttributeReference *FacetAttributeReference `type:"structure"` // The name of the facet attribute. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // The required behavior of the FacetAttribute. RequiredBehavior *string `type:"string" enum:"RequiredAttributeBehavior"` // contains filtered or unexported fields }
Attribute associated with the Facet. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/FacetAttribute
func (FacetAttribute) GoString ¶
func (s FacetAttribute) GoString() string
GoString returns the string representation
func (*FacetAttribute) SetAttributeDefinition ¶
func (s *FacetAttribute) SetAttributeDefinition(v *FacetAttributeDefinition) *FacetAttribute
SetAttributeDefinition sets the AttributeDefinition field's value.
func (*FacetAttribute) SetAttributeReference ¶
func (s *FacetAttribute) SetAttributeReference(v *FacetAttributeReference) *FacetAttribute
SetAttributeReference sets the AttributeReference field's value.
func (*FacetAttribute) SetName ¶
func (s *FacetAttribute) SetName(v string) *FacetAttribute
SetName sets the Name field's value.
func (*FacetAttribute) SetRequiredBehavior ¶
func (s *FacetAttribute) SetRequiredBehavior(v string) *FacetAttribute
SetRequiredBehavior sets the RequiredBehavior field's value.
func (FacetAttribute) String ¶
func (s FacetAttribute) String() string
String returns the string representation
func (*FacetAttribute) Validate ¶
func (s *FacetAttribute) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type FacetAttributeDefinition ¶
type FacetAttributeDefinition struct { // The default value of the attribute (if configured). DefaultValue *TypedAttributeValue `type:"structure"` // Whether the attribute is mutable or not. IsImmutable *bool `type:"boolean"` // Validation rules attached to the attribute definition. Rules map[string]*Rule `type:"map"` // The type of the attribute. // // Type is a required field Type *string `type:"string" required:"true" enum:"FacetAttributeType"` // contains filtered or unexported fields }
A facet attribute definition. See Attribute References (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#attributereferences) for more information. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/FacetAttributeDefinition
func (FacetAttributeDefinition) GoString ¶
func (s FacetAttributeDefinition) GoString() string
GoString returns the string representation
func (*FacetAttributeDefinition) SetDefaultValue ¶
func (s *FacetAttributeDefinition) SetDefaultValue(v *TypedAttributeValue) *FacetAttributeDefinition
SetDefaultValue sets the DefaultValue field's value.
func (*FacetAttributeDefinition) SetIsImmutable ¶
func (s *FacetAttributeDefinition) SetIsImmutable(v bool) *FacetAttributeDefinition
SetIsImmutable sets the IsImmutable field's value.
func (*FacetAttributeDefinition) SetRules ¶
func (s *FacetAttributeDefinition) SetRules(v map[string]*Rule) *FacetAttributeDefinition
SetRules sets the Rules field's value.
func (*FacetAttributeDefinition) SetType ¶
func (s *FacetAttributeDefinition) SetType(v string) *FacetAttributeDefinition
SetType sets the Type field's value.
func (FacetAttributeDefinition) String ¶
func (s FacetAttributeDefinition) String() string
String returns the string representation
func (*FacetAttributeDefinition) Validate ¶
func (s *FacetAttributeDefinition) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type FacetAttributeReference ¶
type FacetAttributeReference struct { // Target attribute name associated with the facet reference. See Attribute // References (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#attributereferences) // for more information. // // TargetAttributeName is a required field TargetAttributeName *string `min:"1" type:"string" required:"true"` // Target facet name associated with the facet reference. See Attribute References // (http://docs.aws.amazon.com/directoryservice/latest/admin-guide/cd_advanced.html#attributereferences) // for more information. // // TargetFacetName is a required field TargetFacetName *string `min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Facet attribute reference that specifies the attribute definition which contains attribute facet name and attribute name. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/FacetAttributeReference
func (FacetAttributeReference) GoString ¶
func (s FacetAttributeReference) GoString() string
GoString returns the string representation
func (*FacetAttributeReference) SetTargetAttributeName ¶
func (s *FacetAttributeReference) SetTargetAttributeName(v string) *FacetAttributeReference
SetTargetAttributeName sets the TargetAttributeName field's value.
func (*FacetAttributeReference) SetTargetFacetName ¶
func (s *FacetAttributeReference) SetTargetFacetName(v string) *FacetAttributeReference
SetTargetFacetName sets the TargetFacetName field's value.
func (FacetAttributeReference) String ¶
func (s FacetAttributeReference) String() string
String returns the string representation
func (*FacetAttributeReference) Validate ¶
func (s *FacetAttributeReference) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type FacetAttributeUpdate ¶
type FacetAttributeUpdate struct { // The action to perform when updating the attribute. Action *string `type:"string" enum:"UpdateActionType"` // The attribute to update. Attribute *FacetAttribute `type:"structure"` // contains filtered or unexported fields }
A structure that contains information used to update an attribute. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/FacetAttributeUpdate
func (FacetAttributeUpdate) GoString ¶
func (s FacetAttributeUpdate) GoString() string
GoString returns the string representation
func (*FacetAttributeUpdate) SetAction ¶
func (s *FacetAttributeUpdate) SetAction(v string) *FacetAttributeUpdate
SetAction sets the Action field's value.
func (*FacetAttributeUpdate) SetAttribute ¶
func (s *FacetAttributeUpdate) SetAttribute(v *FacetAttribute) *FacetAttributeUpdate
SetAttribute sets the Attribute field's value.
func (FacetAttributeUpdate) String ¶
func (s FacetAttributeUpdate) String() string
String returns the string representation
func (*FacetAttributeUpdate) Validate ¶
func (s *FacetAttributeUpdate) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetDirectoryInput ¶
type GetDirectoryInput struct { // The ARN of the directory. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetDirectoryRequest
func (GetDirectoryInput) GoString ¶
func (s GetDirectoryInput) GoString() string
GoString returns the string representation
func (*GetDirectoryInput) SetDirectoryArn ¶
func (s *GetDirectoryInput) SetDirectoryArn(v string) *GetDirectoryInput
SetDirectoryArn sets the DirectoryArn field's value.
func (GetDirectoryInput) String ¶
func (s GetDirectoryInput) String() string
String returns the string representation
func (*GetDirectoryInput) Validate ¶
func (s *GetDirectoryInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetDirectoryOutput ¶
type GetDirectoryOutput struct { // Metadata about the directory. // // Directory is a required field Directory *Directory `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetDirectoryResponse
func (GetDirectoryOutput) GoString ¶
func (s GetDirectoryOutput) GoString() string
GoString returns the string representation
func (*GetDirectoryOutput) SetDirectory ¶
func (s *GetDirectoryOutput) SetDirectory(v *Directory) *GetDirectoryOutput
SetDirectory sets the Directory field's value.
func (GetDirectoryOutput) String ¶
func (s GetDirectoryOutput) String() string
String returns the string representation
type GetFacetInput ¶
type GetFacetInput struct { // The name of the facet to retrieve. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // ARN associated with the Facet. For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetFacetRequest
func (GetFacetInput) GoString ¶
func (s GetFacetInput) GoString() string
GoString returns the string representation
func (*GetFacetInput) SetName ¶
func (s *GetFacetInput) SetName(v string) *GetFacetInput
SetName sets the Name field's value.
func (*GetFacetInput) SetSchemaArn ¶
func (s *GetFacetInput) SetSchemaArn(v string) *GetFacetInput
SetSchemaArn sets the SchemaArn field's value.
func (GetFacetInput) String ¶
func (s GetFacetInput) String() string
String returns the string representation
func (*GetFacetInput) Validate ¶
func (s *GetFacetInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetFacetOutput ¶
type GetFacetOutput struct { // Facet structure associated with the facet. Facet *Facet `type:"structure"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetFacetResponse
func (GetFacetOutput) GoString ¶
func (s GetFacetOutput) GoString() string
GoString returns the string representation
func (*GetFacetOutput) SetFacet ¶
func (s *GetFacetOutput) SetFacet(v *Facet) *GetFacetOutput
SetFacet sets the Facet field's value.
func (GetFacetOutput) String ¶
func (s GetFacetOutput) String() string
String returns the string representation
type GetObjectInformationInput ¶
type GetObjectInformationInput struct { // The consistency level at which to retrieve the object information. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // The ARN of the directory being retrieved. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // A reference to the object. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetObjectInformationRequest
func (GetObjectInformationInput) GoString ¶
func (s GetObjectInformationInput) GoString() string
GoString returns the string representation
func (*GetObjectInformationInput) SetConsistencyLevel ¶
func (s *GetObjectInformationInput) SetConsistencyLevel(v string) *GetObjectInformationInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*GetObjectInformationInput) SetDirectoryArn ¶
func (s *GetObjectInformationInput) SetDirectoryArn(v string) *GetObjectInformationInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*GetObjectInformationInput) SetObjectReference ¶
func (s *GetObjectInformationInput) SetObjectReference(v *ObjectReference) *GetObjectInformationInput
SetObjectReference sets the ObjectReference field's value.
func (GetObjectInformationInput) String ¶
func (s GetObjectInformationInput) String() string
String returns the string representation
func (*GetObjectInformationInput) Validate ¶
func (s *GetObjectInformationInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetObjectInformationOutput ¶
type GetObjectInformationOutput struct { // The ObjectIdentifier of the specified object. ObjectIdentifier *string `type:"string"` // The facets attached to the specified object. SchemaFacets []*SchemaFacet `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetObjectInformationResponse
func (GetObjectInformationOutput) GoString ¶
func (s GetObjectInformationOutput) GoString() string
GoString returns the string representation
func (*GetObjectInformationOutput) SetObjectIdentifier ¶
func (s *GetObjectInformationOutput) SetObjectIdentifier(v string) *GetObjectInformationOutput
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (*GetObjectInformationOutput) SetSchemaFacets ¶
func (s *GetObjectInformationOutput) SetSchemaFacets(v []*SchemaFacet) *GetObjectInformationOutput
SetSchemaFacets sets the SchemaFacets field's value.
func (GetObjectInformationOutput) String ¶
func (s GetObjectInformationOutput) String() string
String returns the string representation
type GetSchemaAsJsonInput ¶
type GetSchemaAsJsonInput struct { // The ARN of the schema to retrieve. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetSchemaAsJsonRequest
func (GetSchemaAsJsonInput) GoString ¶
func (s GetSchemaAsJsonInput) GoString() string
GoString returns the string representation
func (*GetSchemaAsJsonInput) SetSchemaArn ¶
func (s *GetSchemaAsJsonInput) SetSchemaArn(v string) *GetSchemaAsJsonInput
SetSchemaArn sets the SchemaArn field's value.
func (GetSchemaAsJsonInput) String ¶
func (s GetSchemaAsJsonInput) String() string
String returns the string representation
func (*GetSchemaAsJsonInput) Validate ¶
func (s *GetSchemaAsJsonInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetSchemaAsJsonOutput ¶
type GetSchemaAsJsonOutput struct { // The JSON representation of the schema document. Document *string `type:"string"` // The name of the retrieved schema. Name *string `min:"1" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/GetSchemaAsJsonResponse
func (GetSchemaAsJsonOutput) GoString ¶
func (s GetSchemaAsJsonOutput) GoString() string
GoString returns the string representation
func (*GetSchemaAsJsonOutput) SetDocument ¶
func (s *GetSchemaAsJsonOutput) SetDocument(v string) *GetSchemaAsJsonOutput
SetDocument sets the Document field's value.
func (*GetSchemaAsJsonOutput) SetName ¶
func (s *GetSchemaAsJsonOutput) SetName(v string) *GetSchemaAsJsonOutput
SetName sets the Name field's value.
func (GetSchemaAsJsonOutput) String ¶
func (s GetSchemaAsJsonOutput) String() string
String returns the string representation
type IndexAttachment ¶
type IndexAttachment struct { // The indexed attribute values. IndexedAttributes []*AttributeKeyAndValue `type:"list"` // The ObjectIdentifier of the object attached to the index. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Represents an index and an attached object. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/IndexAttachment
func (IndexAttachment) GoString ¶
func (s IndexAttachment) GoString() string
GoString returns the string representation
func (*IndexAttachment) SetIndexedAttributes ¶
func (s *IndexAttachment) SetIndexedAttributes(v []*AttributeKeyAndValue) *IndexAttachment
SetIndexedAttributes sets the IndexedAttributes field's value.
func (*IndexAttachment) SetObjectIdentifier ¶
func (s *IndexAttachment) SetObjectIdentifier(v string) *IndexAttachment
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (IndexAttachment) String ¶
func (s IndexAttachment) String() string
String returns the string representation
type ListAppliedSchemaArnsInput ¶
type ListAppliedSchemaArnsInput struct { // The ARN of the directory you are listing. // // DirectoryArn is a required field DirectoryArn *string `type:"string" required:"true"` // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAppliedSchemaArnsRequest
func (ListAppliedSchemaArnsInput) GoString ¶
func (s ListAppliedSchemaArnsInput) GoString() string
GoString returns the string representation
func (*ListAppliedSchemaArnsInput) SetDirectoryArn ¶
func (s *ListAppliedSchemaArnsInput) SetDirectoryArn(v string) *ListAppliedSchemaArnsInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListAppliedSchemaArnsInput) SetMaxResults ¶
func (s *ListAppliedSchemaArnsInput) SetMaxResults(v int64) *ListAppliedSchemaArnsInput
SetMaxResults sets the MaxResults field's value.
func (*ListAppliedSchemaArnsInput) SetNextToken ¶
func (s *ListAppliedSchemaArnsInput) SetNextToken(v string) *ListAppliedSchemaArnsInput
SetNextToken sets the NextToken field's value.
func (ListAppliedSchemaArnsInput) String ¶
func (s ListAppliedSchemaArnsInput) String() string
String returns the string representation
func (*ListAppliedSchemaArnsInput) Validate ¶
func (s *ListAppliedSchemaArnsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListAppliedSchemaArnsOutput ¶
type ListAppliedSchemaArnsOutput struct { // The pagination token. NextToken *string `type:"string"` // The ARNs of schemas that are applied to the directory. SchemaArns []*string `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAppliedSchemaArnsResponse
func (ListAppliedSchemaArnsOutput) GoString ¶
func (s ListAppliedSchemaArnsOutput) GoString() string
GoString returns the string representation
func (*ListAppliedSchemaArnsOutput) SetNextToken ¶
func (s *ListAppliedSchemaArnsOutput) SetNextToken(v string) *ListAppliedSchemaArnsOutput
SetNextToken sets the NextToken field's value.
func (*ListAppliedSchemaArnsOutput) SetSchemaArns ¶
func (s *ListAppliedSchemaArnsOutput) SetSchemaArns(v []*string) *ListAppliedSchemaArnsOutput
SetSchemaArns sets the SchemaArns field's value.
func (ListAppliedSchemaArnsOutput) String ¶
func (s ListAppliedSchemaArnsOutput) String() string
String returns the string representation
type ListAttachedIndicesInput ¶
type ListAttachedIndicesInput struct { // The consistency level to use for this operation. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // The ARN of the directory. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // A reference to the object to that has indices attached. // // TargetReference is a required field TargetReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAttachedIndicesRequest
func (ListAttachedIndicesInput) GoString ¶
func (s ListAttachedIndicesInput) GoString() string
GoString returns the string representation
func (*ListAttachedIndicesInput) SetConsistencyLevel ¶
func (s *ListAttachedIndicesInput) SetConsistencyLevel(v string) *ListAttachedIndicesInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListAttachedIndicesInput) SetDirectoryArn ¶
func (s *ListAttachedIndicesInput) SetDirectoryArn(v string) *ListAttachedIndicesInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListAttachedIndicesInput) SetMaxResults ¶
func (s *ListAttachedIndicesInput) SetMaxResults(v int64) *ListAttachedIndicesInput
SetMaxResults sets the MaxResults field's value.
func (*ListAttachedIndicesInput) SetNextToken ¶
func (s *ListAttachedIndicesInput) SetNextToken(v string) *ListAttachedIndicesInput
SetNextToken sets the NextToken field's value.
func (*ListAttachedIndicesInput) SetTargetReference ¶
func (s *ListAttachedIndicesInput) SetTargetReference(v *ObjectReference) *ListAttachedIndicesInput
SetTargetReference sets the TargetReference field's value.
func (ListAttachedIndicesInput) String ¶
func (s ListAttachedIndicesInput) String() string
String returns the string representation
func (*ListAttachedIndicesInput) Validate ¶
func (s *ListAttachedIndicesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListAttachedIndicesOutput ¶
type ListAttachedIndicesOutput struct { // The indices attached to the specified object. IndexAttachments []*IndexAttachment `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListAttachedIndicesResponse
func (ListAttachedIndicesOutput) GoString ¶
func (s ListAttachedIndicesOutput) GoString() string
GoString returns the string representation
func (*ListAttachedIndicesOutput) SetIndexAttachments ¶
func (s *ListAttachedIndicesOutput) SetIndexAttachments(v []*IndexAttachment) *ListAttachedIndicesOutput
SetIndexAttachments sets the IndexAttachments field's value.
func (*ListAttachedIndicesOutput) SetNextToken ¶
func (s *ListAttachedIndicesOutput) SetNextToken(v string) *ListAttachedIndicesOutput
SetNextToken sets the NextToken field's value.
func (ListAttachedIndicesOutput) String ¶
func (s ListAttachedIndicesOutput) String() string
String returns the string representation
type ListDevelopmentSchemaArnsInput ¶
type ListDevelopmentSchemaArnsInput struct { // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDevelopmentSchemaArnsRequest
func (ListDevelopmentSchemaArnsInput) GoString ¶
func (s ListDevelopmentSchemaArnsInput) GoString() string
GoString returns the string representation
func (*ListDevelopmentSchemaArnsInput) SetMaxResults ¶
func (s *ListDevelopmentSchemaArnsInput) SetMaxResults(v int64) *ListDevelopmentSchemaArnsInput
SetMaxResults sets the MaxResults field's value.
func (*ListDevelopmentSchemaArnsInput) SetNextToken ¶
func (s *ListDevelopmentSchemaArnsInput) SetNextToken(v string) *ListDevelopmentSchemaArnsInput
SetNextToken sets the NextToken field's value.
func (ListDevelopmentSchemaArnsInput) String ¶
func (s ListDevelopmentSchemaArnsInput) String() string
String returns the string representation
func (*ListDevelopmentSchemaArnsInput) Validate ¶ added in v1.7.8
func (s *ListDevelopmentSchemaArnsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListDevelopmentSchemaArnsOutput ¶
type ListDevelopmentSchemaArnsOutput struct { // The pagination token. NextToken *string `type:"string"` // The ARNs of retrieved development schemas. SchemaArns []*string `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDevelopmentSchemaArnsResponse
func (ListDevelopmentSchemaArnsOutput) GoString ¶
func (s ListDevelopmentSchemaArnsOutput) GoString() string
GoString returns the string representation
func (*ListDevelopmentSchemaArnsOutput) SetNextToken ¶
func (s *ListDevelopmentSchemaArnsOutput) SetNextToken(v string) *ListDevelopmentSchemaArnsOutput
SetNextToken sets the NextToken field's value.
func (*ListDevelopmentSchemaArnsOutput) SetSchemaArns ¶
func (s *ListDevelopmentSchemaArnsOutput) SetSchemaArns(v []*string) *ListDevelopmentSchemaArnsOutput
SetSchemaArns sets the SchemaArns field's value.
func (ListDevelopmentSchemaArnsOutput) String ¶
func (s ListDevelopmentSchemaArnsOutput) String() string
String returns the string representation
type ListDirectoriesInput ¶
type ListDirectoriesInput struct { // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // The state of the directories in the list. Can be either Enabled, Disabled, // or Deleted. State *string `locationName:"state" type:"string" enum:"DirectoryState"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDirectoriesRequest
func (ListDirectoriesInput) GoString ¶
func (s ListDirectoriesInput) GoString() string
GoString returns the string representation
func (*ListDirectoriesInput) SetMaxResults ¶
func (s *ListDirectoriesInput) SetMaxResults(v int64) *ListDirectoriesInput
SetMaxResults sets the MaxResults field's value.
func (*ListDirectoriesInput) SetNextToken ¶
func (s *ListDirectoriesInput) SetNextToken(v string) *ListDirectoriesInput
SetNextToken sets the NextToken field's value.
func (*ListDirectoriesInput) SetState ¶
func (s *ListDirectoriesInput) SetState(v string) *ListDirectoriesInput
SetState sets the State field's value.
func (ListDirectoriesInput) String ¶
func (s ListDirectoriesInput) String() string
String returns the string representation
func (*ListDirectoriesInput) Validate ¶ added in v1.7.8
func (s *ListDirectoriesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListDirectoriesOutput ¶
type ListDirectoriesOutput struct { // Lists all directories associated with your account in pagination fashion. // // Directories is a required field Directories []*Directory `type:"list" required:"true"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListDirectoriesResponse
func (ListDirectoriesOutput) GoString ¶
func (s ListDirectoriesOutput) GoString() string
GoString returns the string representation
func (*ListDirectoriesOutput) SetDirectories ¶
func (s *ListDirectoriesOutput) SetDirectories(v []*Directory) *ListDirectoriesOutput
SetDirectories sets the Directories field's value.
func (*ListDirectoriesOutput) SetNextToken ¶
func (s *ListDirectoriesOutput) SetNextToken(v string) *ListDirectoriesOutput
SetNextToken sets the NextToken field's value.
func (ListDirectoriesOutput) String ¶
func (s ListDirectoriesOutput) String() string
String returns the string representation
type ListFacetAttributesInput ¶
type ListFacetAttributesInput struct { // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The name of the facet whose attributes will be retrieved. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // The pagination token. NextToken *string `type:"string"` // The ARN of the schema where the facet resides. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetAttributesRequest
func (ListFacetAttributesInput) GoString ¶
func (s ListFacetAttributesInput) GoString() string
GoString returns the string representation
func (*ListFacetAttributesInput) SetMaxResults ¶
func (s *ListFacetAttributesInput) SetMaxResults(v int64) *ListFacetAttributesInput
SetMaxResults sets the MaxResults field's value.
func (*ListFacetAttributesInput) SetName ¶
func (s *ListFacetAttributesInput) SetName(v string) *ListFacetAttributesInput
SetName sets the Name field's value.
func (*ListFacetAttributesInput) SetNextToken ¶
func (s *ListFacetAttributesInput) SetNextToken(v string) *ListFacetAttributesInput
SetNextToken sets the NextToken field's value.
func (*ListFacetAttributesInput) SetSchemaArn ¶
func (s *ListFacetAttributesInput) SetSchemaArn(v string) *ListFacetAttributesInput
SetSchemaArn sets the SchemaArn field's value.
func (ListFacetAttributesInput) String ¶
func (s ListFacetAttributesInput) String() string
String returns the string representation
func (*ListFacetAttributesInput) Validate ¶
func (s *ListFacetAttributesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListFacetAttributesOutput ¶
type ListFacetAttributesOutput struct { // The attributes attached to the facet. Attributes []*FacetAttribute `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetAttributesResponse
func (ListFacetAttributesOutput) GoString ¶
func (s ListFacetAttributesOutput) GoString() string
GoString returns the string representation
func (*ListFacetAttributesOutput) SetAttributes ¶
func (s *ListFacetAttributesOutput) SetAttributes(v []*FacetAttribute) *ListFacetAttributesOutput
SetAttributes sets the Attributes field's value.
func (*ListFacetAttributesOutput) SetNextToken ¶
func (s *ListFacetAttributesOutput) SetNextToken(v string) *ListFacetAttributesOutput
SetNextToken sets the NextToken field's value.
func (ListFacetAttributesOutput) String ¶
func (s ListFacetAttributesOutput) String() string
String returns the string representation
type ListFacetNamesInput ¶
type ListFacetNamesInput struct { // The maximum number of results to retrieve MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // The ARN to retrieve facet names from. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetNamesRequest
func (ListFacetNamesInput) GoString ¶
func (s ListFacetNamesInput) GoString() string
GoString returns the string representation
func (*ListFacetNamesInput) SetMaxResults ¶
func (s *ListFacetNamesInput) SetMaxResults(v int64) *ListFacetNamesInput
SetMaxResults sets the MaxResults field's value.
func (*ListFacetNamesInput) SetNextToken ¶
func (s *ListFacetNamesInput) SetNextToken(v string) *ListFacetNamesInput
SetNextToken sets the NextToken field's value.
func (*ListFacetNamesInput) SetSchemaArn ¶
func (s *ListFacetNamesInput) SetSchemaArn(v string) *ListFacetNamesInput
SetSchemaArn sets the SchemaArn field's value.
func (ListFacetNamesInput) String ¶
func (s ListFacetNamesInput) String() string
String returns the string representation
func (*ListFacetNamesInput) Validate ¶
func (s *ListFacetNamesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListFacetNamesOutput ¶
type ListFacetNamesOutput struct { // The names of facets that exist within the schema. FacetNames []*string `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListFacetNamesResponse
func (ListFacetNamesOutput) GoString ¶
func (s ListFacetNamesOutput) GoString() string
GoString returns the string representation
func (*ListFacetNamesOutput) SetFacetNames ¶
func (s *ListFacetNamesOutput) SetFacetNames(v []*string) *ListFacetNamesOutput
SetFacetNames sets the FacetNames field's value.
func (*ListFacetNamesOutput) SetNextToken ¶
func (s *ListFacetNamesOutput) SetNextToken(v string) *ListFacetNamesOutput
SetNextToken sets the NextToken field's value.
func (ListFacetNamesOutput) String ¶
func (s ListFacetNamesOutput) String() string
String returns the string representation
type ListIndexInput ¶
type ListIndexInput struct { // The consistency level to execute the request at. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // The ARN of the directory that the index exists in. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // The reference to the index to list. // // IndexReference is a required field IndexReference *ObjectReference `type:"structure" required:"true"` // The maximum number of results to retrieve from the index. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Specifies the ranges of indexed values that you want to query. RangesOnIndexedValues []*ObjectAttributeRange `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListIndexRequest
func (ListIndexInput) GoString ¶
func (s ListIndexInput) GoString() string
GoString returns the string representation
func (*ListIndexInput) SetConsistencyLevel ¶
func (s *ListIndexInput) SetConsistencyLevel(v string) *ListIndexInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListIndexInput) SetDirectoryArn ¶
func (s *ListIndexInput) SetDirectoryArn(v string) *ListIndexInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListIndexInput) SetIndexReference ¶
func (s *ListIndexInput) SetIndexReference(v *ObjectReference) *ListIndexInput
SetIndexReference sets the IndexReference field's value.
func (*ListIndexInput) SetMaxResults ¶
func (s *ListIndexInput) SetMaxResults(v int64) *ListIndexInput
SetMaxResults sets the MaxResults field's value.
func (*ListIndexInput) SetNextToken ¶
func (s *ListIndexInput) SetNextToken(v string) *ListIndexInput
SetNextToken sets the NextToken field's value.
func (*ListIndexInput) SetRangesOnIndexedValues ¶
func (s *ListIndexInput) SetRangesOnIndexedValues(v []*ObjectAttributeRange) *ListIndexInput
SetRangesOnIndexedValues sets the RangesOnIndexedValues field's value.
func (ListIndexInput) String ¶
func (s ListIndexInput) String() string
String returns the string representation
func (*ListIndexInput) Validate ¶
func (s *ListIndexInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListIndexOutput ¶
type ListIndexOutput struct { // The objects and indexed values attached to the index. IndexAttachments []*IndexAttachment `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListIndexResponse
func (ListIndexOutput) GoString ¶
func (s ListIndexOutput) GoString() string
GoString returns the string representation
func (*ListIndexOutput) SetIndexAttachments ¶
func (s *ListIndexOutput) SetIndexAttachments(v []*IndexAttachment) *ListIndexOutput
SetIndexAttachments sets the IndexAttachments field's value.
func (*ListIndexOutput) SetNextToken ¶
func (s *ListIndexOutput) SetNextToken(v string) *ListIndexOutput
SetNextToken sets the NextToken field's value.
func (ListIndexOutput) String ¶
func (s ListIndexOutput) String() string
String returns the string representation
type ListObjectAttributesInput ¶
type ListObjectAttributesInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the object whose attributes will be listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectAttributesRequest
func (ListObjectAttributesInput) GoString ¶
func (s ListObjectAttributesInput) GoString() string
GoString returns the string representation
func (*ListObjectAttributesInput) SetConsistencyLevel ¶
func (s *ListObjectAttributesInput) SetConsistencyLevel(v string) *ListObjectAttributesInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListObjectAttributesInput) SetDirectoryArn ¶
func (s *ListObjectAttributesInput) SetDirectoryArn(v string) *ListObjectAttributesInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListObjectAttributesInput) SetMaxResults ¶
func (s *ListObjectAttributesInput) SetMaxResults(v int64) *ListObjectAttributesInput
SetMaxResults sets the MaxResults field's value.
func (*ListObjectAttributesInput) SetNextToken ¶
func (s *ListObjectAttributesInput) SetNextToken(v string) *ListObjectAttributesInput
SetNextToken sets the NextToken field's value.
func (*ListObjectAttributesInput) SetObjectReference ¶
func (s *ListObjectAttributesInput) SetObjectReference(v *ObjectReference) *ListObjectAttributesInput
SetObjectReference sets the ObjectReference field's value.
func (ListObjectAttributesInput) String ¶
func (s ListObjectAttributesInput) String() string
String returns the string representation
func (*ListObjectAttributesInput) Validate ¶
func (s *ListObjectAttributesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListObjectAttributesOutput ¶
type ListObjectAttributesOutput struct { // Attributes map associated with the object. AttributeArn is the key, and attribute // value is the value. Attributes []*AttributeKeyAndValue `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectAttributesResponse
func (ListObjectAttributesOutput) GoString ¶
func (s ListObjectAttributesOutput) GoString() string
GoString returns the string representation
func (*ListObjectAttributesOutput) SetAttributes ¶
func (s *ListObjectAttributesOutput) SetAttributes(v []*AttributeKeyAndValue) *ListObjectAttributesOutput
SetAttributes sets the Attributes field's value.
func (*ListObjectAttributesOutput) SetNextToken ¶
func (s *ListObjectAttributesOutput) SetNextToken(v string) *ListObjectAttributesOutput
SetNextToken sets the NextToken field's value.
func (ListObjectAttributesOutput) String ¶
func (s ListObjectAttributesOutput) String() string
String returns the string representation
type ListObjectChildrenInput ¶
type ListObjectChildrenInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the object for which child objects are being listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectChildrenRequest
func (ListObjectChildrenInput) GoString ¶
func (s ListObjectChildrenInput) GoString() string
GoString returns the string representation
func (*ListObjectChildrenInput) SetConsistencyLevel ¶
func (s *ListObjectChildrenInput) SetConsistencyLevel(v string) *ListObjectChildrenInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListObjectChildrenInput) SetDirectoryArn ¶
func (s *ListObjectChildrenInput) SetDirectoryArn(v string) *ListObjectChildrenInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListObjectChildrenInput) SetMaxResults ¶
func (s *ListObjectChildrenInput) SetMaxResults(v int64) *ListObjectChildrenInput
SetMaxResults sets the MaxResults field's value.
func (*ListObjectChildrenInput) SetNextToken ¶
func (s *ListObjectChildrenInput) SetNextToken(v string) *ListObjectChildrenInput
SetNextToken sets the NextToken field's value.
func (*ListObjectChildrenInput) SetObjectReference ¶
func (s *ListObjectChildrenInput) SetObjectReference(v *ObjectReference) *ListObjectChildrenInput
SetObjectReference sets the ObjectReference field's value.
func (ListObjectChildrenInput) String ¶
func (s ListObjectChildrenInput) String() string
String returns the string representation
func (*ListObjectChildrenInput) Validate ¶
func (s *ListObjectChildrenInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListObjectChildrenOutput ¶
type ListObjectChildrenOutput struct { // Children structure, which is a map with key as the LinkName and ObjectIdentifier // as the value. Children map[string]*string `type:"map"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectChildrenResponse
func (ListObjectChildrenOutput) GoString ¶
func (s ListObjectChildrenOutput) GoString() string
GoString returns the string representation
func (*ListObjectChildrenOutput) SetChildren ¶
func (s *ListObjectChildrenOutput) SetChildren(v map[string]*string) *ListObjectChildrenOutput
SetChildren sets the Children field's value.
func (*ListObjectChildrenOutput) SetNextToken ¶
func (s *ListObjectChildrenOutput) SetNextToken(v string) *ListObjectChildrenOutput
SetNextToken sets the NextToken field's value.
func (ListObjectChildrenOutput) String ¶
func (s ListObjectChildrenOutput) String() string
String returns the string representation
type ListObjectParentPathsInput ¶ added in v1.7.8
type ListObjectParentPathsInput struct { // The ARN of the directory to which the parent path applies. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the object whose parent paths are listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentPathsRequest
func (ListObjectParentPathsInput) GoString ¶ added in v1.7.8
func (s ListObjectParentPathsInput) GoString() string
GoString returns the string representation
func (*ListObjectParentPathsInput) SetDirectoryArn ¶ added in v1.7.8
func (s *ListObjectParentPathsInput) SetDirectoryArn(v string) *ListObjectParentPathsInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListObjectParentPathsInput) SetMaxResults ¶ added in v1.7.8
func (s *ListObjectParentPathsInput) SetMaxResults(v int64) *ListObjectParentPathsInput
SetMaxResults sets the MaxResults field's value.
func (*ListObjectParentPathsInput) SetNextToken ¶ added in v1.7.8
func (s *ListObjectParentPathsInput) SetNextToken(v string) *ListObjectParentPathsInput
SetNextToken sets the NextToken field's value.
func (*ListObjectParentPathsInput) SetObjectReference ¶ added in v1.7.8
func (s *ListObjectParentPathsInput) SetObjectReference(v *ObjectReference) *ListObjectParentPathsInput
SetObjectReference sets the ObjectReference field's value.
func (ListObjectParentPathsInput) String ¶ added in v1.7.8
func (s ListObjectParentPathsInput) String() string
String returns the string representation
func (*ListObjectParentPathsInput) Validate ¶ added in v1.7.8
func (s *ListObjectParentPathsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListObjectParentPathsOutput ¶ added in v1.7.8
type ListObjectParentPathsOutput struct { // The pagination token. NextToken *string `type:"string"` // Returns the path to the ObjectIdentifiers associated with the directory. PathToObjectIdentifiersList []*PathToObjectIdentifiers `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentPathsResponse
func (ListObjectParentPathsOutput) GoString ¶ added in v1.7.8
func (s ListObjectParentPathsOutput) GoString() string
GoString returns the string representation
func (*ListObjectParentPathsOutput) SetNextToken ¶ added in v1.7.8
func (s *ListObjectParentPathsOutput) SetNextToken(v string) *ListObjectParentPathsOutput
SetNextToken sets the NextToken field's value.
func (*ListObjectParentPathsOutput) SetPathToObjectIdentifiersList ¶ added in v1.7.8
func (s *ListObjectParentPathsOutput) SetPathToObjectIdentifiersList(v []*PathToObjectIdentifiers) *ListObjectParentPathsOutput
SetPathToObjectIdentifiersList sets the PathToObjectIdentifiersList field's value.
func (ListObjectParentPathsOutput) String ¶ added in v1.7.8
func (s ListObjectParentPathsOutput) String() string
String returns the string representation
type ListObjectParentsInput ¶
type ListObjectParentsInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the object for which parent objects are being listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentsRequest
func (ListObjectParentsInput) GoString ¶
func (s ListObjectParentsInput) GoString() string
GoString returns the string representation
func (*ListObjectParentsInput) SetConsistencyLevel ¶
func (s *ListObjectParentsInput) SetConsistencyLevel(v string) *ListObjectParentsInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListObjectParentsInput) SetDirectoryArn ¶
func (s *ListObjectParentsInput) SetDirectoryArn(v string) *ListObjectParentsInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListObjectParentsInput) SetMaxResults ¶
func (s *ListObjectParentsInput) SetMaxResults(v int64) *ListObjectParentsInput
SetMaxResults sets the MaxResults field's value.
func (*ListObjectParentsInput) SetNextToken ¶
func (s *ListObjectParentsInput) SetNextToken(v string) *ListObjectParentsInput
SetNextToken sets the NextToken field's value.
func (*ListObjectParentsInput) SetObjectReference ¶
func (s *ListObjectParentsInput) SetObjectReference(v *ObjectReference) *ListObjectParentsInput
SetObjectReference sets the ObjectReference field's value.
func (ListObjectParentsInput) String ¶
func (s ListObjectParentsInput) String() string
String returns the string representation
func (*ListObjectParentsInput) Validate ¶
func (s *ListObjectParentsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListObjectParentsOutput ¶
type ListObjectParentsOutput struct { // The pagination token. NextToken *string `type:"string"` // Parent structure, which is a map with key as the ObjectIdentifier and LinkName // as the value. Parents map[string]*string `type:"map"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectParentsResponse
func (ListObjectParentsOutput) GoString ¶
func (s ListObjectParentsOutput) GoString() string
GoString returns the string representation
func (*ListObjectParentsOutput) SetNextToken ¶
func (s *ListObjectParentsOutput) SetNextToken(v string) *ListObjectParentsOutput
SetNextToken sets the NextToken field's value.
func (*ListObjectParentsOutput) SetParents ¶
func (s *ListObjectParentsOutput) SetParents(v map[string]*string) *ListObjectParentsOutput
SetParents sets the Parents field's value.
func (ListObjectParentsOutput) String ¶
func (s ListObjectParentsOutput) String() string
String returns the string representation
type ListObjectPoliciesInput ¶
type ListObjectPoliciesInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory where objects reside. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the object for which policies will be listed. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectPoliciesRequest
func (ListObjectPoliciesInput) GoString ¶
func (s ListObjectPoliciesInput) GoString() string
GoString returns the string representation
func (*ListObjectPoliciesInput) SetConsistencyLevel ¶
func (s *ListObjectPoliciesInput) SetConsistencyLevel(v string) *ListObjectPoliciesInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListObjectPoliciesInput) SetDirectoryArn ¶
func (s *ListObjectPoliciesInput) SetDirectoryArn(v string) *ListObjectPoliciesInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListObjectPoliciesInput) SetMaxResults ¶
func (s *ListObjectPoliciesInput) SetMaxResults(v int64) *ListObjectPoliciesInput
SetMaxResults sets the MaxResults field's value.
func (*ListObjectPoliciesInput) SetNextToken ¶
func (s *ListObjectPoliciesInput) SetNextToken(v string) *ListObjectPoliciesInput
SetNextToken sets the NextToken field's value.
func (*ListObjectPoliciesInput) SetObjectReference ¶
func (s *ListObjectPoliciesInput) SetObjectReference(v *ObjectReference) *ListObjectPoliciesInput
SetObjectReference sets the ObjectReference field's value.
func (ListObjectPoliciesInput) String ¶
func (s ListObjectPoliciesInput) String() string
String returns the string representation
func (*ListObjectPoliciesInput) Validate ¶
func (s *ListObjectPoliciesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListObjectPoliciesOutput ¶
type ListObjectPoliciesOutput struct { // List of policy ObjectIdentifiers, that are attached to the object. AttachedPolicyIds []*string `type:"list"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListObjectPoliciesResponse
func (ListObjectPoliciesOutput) GoString ¶
func (s ListObjectPoliciesOutput) GoString() string
GoString returns the string representation
func (*ListObjectPoliciesOutput) SetAttachedPolicyIds ¶
func (s *ListObjectPoliciesOutput) SetAttachedPolicyIds(v []*string) *ListObjectPoliciesOutput
SetAttachedPolicyIds sets the AttachedPolicyIds field's value.
func (*ListObjectPoliciesOutput) SetNextToken ¶
func (s *ListObjectPoliciesOutput) SetNextToken(v string) *ListObjectPoliciesOutput
SetNextToken sets the NextToken field's value.
func (ListObjectPoliciesOutput) String ¶
func (s ListObjectPoliciesOutput) String() string
String returns the string representation
type ListPolicyAttachmentsInput ¶
type ListPolicyAttachmentsInput struct { // Represents the manner and timing in which the successful write or update // of an object is reflected in a subsequent read operation of that same object. ConsistencyLevel *string `location:"header" locationName:"x-amz-consistency-level" type:"string" enum:"ConsistencyLevel"` // ARN associated with the Directory where objects reside. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // Reference that identifies the policy object. // // PolicyReference is a required field PolicyReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPolicyAttachmentsRequest
func (ListPolicyAttachmentsInput) GoString ¶
func (s ListPolicyAttachmentsInput) GoString() string
GoString returns the string representation
func (*ListPolicyAttachmentsInput) SetConsistencyLevel ¶
func (s *ListPolicyAttachmentsInput) SetConsistencyLevel(v string) *ListPolicyAttachmentsInput
SetConsistencyLevel sets the ConsistencyLevel field's value.
func (*ListPolicyAttachmentsInput) SetDirectoryArn ¶
func (s *ListPolicyAttachmentsInput) SetDirectoryArn(v string) *ListPolicyAttachmentsInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*ListPolicyAttachmentsInput) SetMaxResults ¶
func (s *ListPolicyAttachmentsInput) SetMaxResults(v int64) *ListPolicyAttachmentsInput
SetMaxResults sets the MaxResults field's value.
func (*ListPolicyAttachmentsInput) SetNextToken ¶
func (s *ListPolicyAttachmentsInput) SetNextToken(v string) *ListPolicyAttachmentsInput
SetNextToken sets the NextToken field's value.
func (*ListPolicyAttachmentsInput) SetPolicyReference ¶
func (s *ListPolicyAttachmentsInput) SetPolicyReference(v *ObjectReference) *ListPolicyAttachmentsInput
SetPolicyReference sets the PolicyReference field's value.
func (ListPolicyAttachmentsInput) String ¶
func (s ListPolicyAttachmentsInput) String() string
String returns the string representation
func (*ListPolicyAttachmentsInput) Validate ¶
func (s *ListPolicyAttachmentsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListPolicyAttachmentsOutput ¶
type ListPolicyAttachmentsOutput struct { // The pagination token. NextToken *string `type:"string"` // List of ObjectIdentifiers to which the policy is attached. ObjectIdentifiers []*string `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPolicyAttachmentsResponse
func (ListPolicyAttachmentsOutput) GoString ¶
func (s ListPolicyAttachmentsOutput) GoString() string
GoString returns the string representation
func (*ListPolicyAttachmentsOutput) SetNextToken ¶
func (s *ListPolicyAttachmentsOutput) SetNextToken(v string) *ListPolicyAttachmentsOutput
SetNextToken sets the NextToken field's value.
func (*ListPolicyAttachmentsOutput) SetObjectIdentifiers ¶
func (s *ListPolicyAttachmentsOutput) SetObjectIdentifiers(v []*string) *ListPolicyAttachmentsOutput
SetObjectIdentifiers sets the ObjectIdentifiers field's value.
func (ListPolicyAttachmentsOutput) String ¶
func (s ListPolicyAttachmentsOutput) String() string
String returns the string representation
type ListPublishedSchemaArnsInput ¶
type ListPublishedSchemaArnsInput struct { // The maximum number of results to retrieve. MaxResults *int64 `min:"1" type:"integer"` // The pagination token. NextToken *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPublishedSchemaArnsRequest
func (ListPublishedSchemaArnsInput) GoString ¶
func (s ListPublishedSchemaArnsInput) GoString() string
GoString returns the string representation
func (*ListPublishedSchemaArnsInput) SetMaxResults ¶
func (s *ListPublishedSchemaArnsInput) SetMaxResults(v int64) *ListPublishedSchemaArnsInput
SetMaxResults sets the MaxResults field's value.
func (*ListPublishedSchemaArnsInput) SetNextToken ¶
func (s *ListPublishedSchemaArnsInput) SetNextToken(v string) *ListPublishedSchemaArnsInput
SetNextToken sets the NextToken field's value.
func (ListPublishedSchemaArnsInput) String ¶
func (s ListPublishedSchemaArnsInput) String() string
String returns the string representation
func (*ListPublishedSchemaArnsInput) Validate ¶ added in v1.7.8
func (s *ListPublishedSchemaArnsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListPublishedSchemaArnsOutput ¶
type ListPublishedSchemaArnsOutput struct { // The pagination token. NextToken *string `type:"string"` // The ARNs of published schemas. SchemaArns []*string `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListPublishedSchemaArnsResponse
func (ListPublishedSchemaArnsOutput) GoString ¶
func (s ListPublishedSchemaArnsOutput) GoString() string
GoString returns the string representation
func (*ListPublishedSchemaArnsOutput) SetNextToken ¶
func (s *ListPublishedSchemaArnsOutput) SetNextToken(v string) *ListPublishedSchemaArnsOutput
SetNextToken sets the NextToken field's value.
func (*ListPublishedSchemaArnsOutput) SetSchemaArns ¶
func (s *ListPublishedSchemaArnsOutput) SetSchemaArns(v []*string) *ListPublishedSchemaArnsOutput
SetSchemaArns sets the SchemaArns field's value.
func (ListPublishedSchemaArnsOutput) String ¶
func (s ListPublishedSchemaArnsOutput) String() string
String returns the string representation
type ListTagsForResourceInput ¶
type ListTagsForResourceInput struct { // The MaxResults parameter sets the maximum number of results returned in a // single page. This is for future use and is not supported currently. MaxResults *int64 `min:"50" type:"integer"` // The pagination token. This is for future use. Currently pagination is not // supported for tagging. NextToken *string `type:"string"` // ARN of the resource. Tagging is only supported for directories. // // ResourceArn is a required field ResourceArn *string `type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListTagsForResourceRequest
func (ListTagsForResourceInput) GoString ¶
func (s ListTagsForResourceInput) GoString() string
GoString returns the string representation
func (*ListTagsForResourceInput) SetMaxResults ¶
func (s *ListTagsForResourceInput) SetMaxResults(v int64) *ListTagsForResourceInput
SetMaxResults sets the MaxResults field's value.
func (*ListTagsForResourceInput) SetNextToken ¶
func (s *ListTagsForResourceInput) SetNextToken(v string) *ListTagsForResourceInput
SetNextToken sets the NextToken field's value.
func (*ListTagsForResourceInput) SetResourceArn ¶
func (s *ListTagsForResourceInput) SetResourceArn(v string) *ListTagsForResourceInput
SetResourceArn sets the ResourceArn field's value.
func (ListTagsForResourceInput) String ¶
func (s ListTagsForResourceInput) String() string
String returns the string representation
func (*ListTagsForResourceInput) Validate ¶
func (s *ListTagsForResourceInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListTagsForResourceOutput ¶
type ListTagsForResourceOutput struct { // The token to use to retrieve the next page of results. This value is null // when there are no more results to return. NextToken *string `type:"string"` // List of tag key value pairs associated with the response. Tags []*Tag `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ListTagsForResourceResponse
func (ListTagsForResourceOutput) GoString ¶
func (s ListTagsForResourceOutput) GoString() string
GoString returns the string representation
func (*ListTagsForResourceOutput) SetNextToken ¶
func (s *ListTagsForResourceOutput) SetNextToken(v string) *ListTagsForResourceOutput
SetNextToken sets the NextToken field's value.
func (*ListTagsForResourceOutput) SetTags ¶
func (s *ListTagsForResourceOutput) SetTags(v []*Tag) *ListTagsForResourceOutput
SetTags sets the Tags field's value.
func (ListTagsForResourceOutput) String ¶
func (s ListTagsForResourceOutput) String() string
String returns the string representation
type LookupPolicyInput ¶
type LookupPolicyInput struct { // ARN associated with the Directory. For more information, see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Maximum number of items to be retrieved in a single call. This is an approximate // number. MaxResults *int64 `min:"1" type:"integer"` // The token to request the next page of results. NextToken *string `type:"string"` // Reference that identifies the object whose policies will be looked up. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/LookupPolicyRequest
func (LookupPolicyInput) GoString ¶
func (s LookupPolicyInput) GoString() string
GoString returns the string representation
func (*LookupPolicyInput) SetDirectoryArn ¶
func (s *LookupPolicyInput) SetDirectoryArn(v string) *LookupPolicyInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*LookupPolicyInput) SetMaxResults ¶
func (s *LookupPolicyInput) SetMaxResults(v int64) *LookupPolicyInput
SetMaxResults sets the MaxResults field's value.
func (*LookupPolicyInput) SetNextToken ¶
func (s *LookupPolicyInput) SetNextToken(v string) *LookupPolicyInput
SetNextToken sets the NextToken field's value.
func (*LookupPolicyInput) SetObjectReference ¶
func (s *LookupPolicyInput) SetObjectReference(v *ObjectReference) *LookupPolicyInput
SetObjectReference sets the ObjectReference field's value.
func (LookupPolicyInput) String ¶
func (s LookupPolicyInput) String() string
String returns the string representation
func (*LookupPolicyInput) Validate ¶
func (s *LookupPolicyInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type LookupPolicyOutput ¶
type LookupPolicyOutput struct { // The pagination token. NextToken *string `type:"string"` // Provides list of path to policies. Policies contain PolicyId, ObjectIdentifier, // and PolicyType. PolicyToPathList []*PolicyToPath `type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/LookupPolicyResponse
func (LookupPolicyOutput) GoString ¶
func (s LookupPolicyOutput) GoString() string
GoString returns the string representation
func (*LookupPolicyOutput) SetNextToken ¶
func (s *LookupPolicyOutput) SetNextToken(v string) *LookupPolicyOutput
SetNextToken sets the NextToken field's value.
func (*LookupPolicyOutput) SetPolicyToPathList ¶
func (s *LookupPolicyOutput) SetPolicyToPathList(v []*PolicyToPath) *LookupPolicyOutput
SetPolicyToPathList sets the PolicyToPathList field's value.
func (LookupPolicyOutput) String ¶
func (s LookupPolicyOutput) String() string
String returns the string representation
type ObjectAttributeAction ¶
type ObjectAttributeAction struct { // Type can be either Update or Delete. ObjectAttributeActionType *string `type:"string" enum:"UpdateActionType"` // The value that you want to update to. ObjectAttributeUpdateValue *TypedAttributeValue `type:"structure"` // contains filtered or unexported fields }
The action to take on the object attribute. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ObjectAttributeAction
func (ObjectAttributeAction) GoString ¶
func (s ObjectAttributeAction) GoString() string
GoString returns the string representation
func (*ObjectAttributeAction) SetObjectAttributeActionType ¶
func (s *ObjectAttributeAction) SetObjectAttributeActionType(v string) *ObjectAttributeAction
SetObjectAttributeActionType sets the ObjectAttributeActionType field's value.
func (*ObjectAttributeAction) SetObjectAttributeUpdateValue ¶
func (s *ObjectAttributeAction) SetObjectAttributeUpdateValue(v *TypedAttributeValue) *ObjectAttributeAction
SetObjectAttributeUpdateValue sets the ObjectAttributeUpdateValue field's value.
func (ObjectAttributeAction) String ¶
func (s ObjectAttributeAction) String() string
String returns the string representation
type ObjectAttributeRange ¶
type ObjectAttributeRange struct { // The key of the attribute the attribute range covers. AttributeKey *AttributeKey `type:"structure"` // The range of attribute values being selected. Range *TypedAttributeValueRange `type:"structure"` // contains filtered or unexported fields }
A range of attributes. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ObjectAttributeRange
func (ObjectAttributeRange) GoString ¶
func (s ObjectAttributeRange) GoString() string
GoString returns the string representation
func (*ObjectAttributeRange) SetAttributeKey ¶
func (s *ObjectAttributeRange) SetAttributeKey(v *AttributeKey) *ObjectAttributeRange
SetAttributeKey sets the AttributeKey field's value.
func (*ObjectAttributeRange) SetRange ¶
func (s *ObjectAttributeRange) SetRange(v *TypedAttributeValueRange) *ObjectAttributeRange
SetRange sets the Range field's value.
func (ObjectAttributeRange) String ¶
func (s ObjectAttributeRange) String() string
String returns the string representation
func (*ObjectAttributeRange) Validate ¶
func (s *ObjectAttributeRange) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ObjectAttributeUpdate ¶
type ObjectAttributeUpdate struct { // The action to perform as part of the attribute update. ObjectAttributeAction *ObjectAttributeAction `type:"structure"` // The key of the attribute being updated. ObjectAttributeKey *AttributeKey `type:"structure"` // contains filtered or unexported fields }
Structure that contains attribute update information. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ObjectAttributeUpdate
func (ObjectAttributeUpdate) GoString ¶
func (s ObjectAttributeUpdate) GoString() string
GoString returns the string representation
func (*ObjectAttributeUpdate) SetObjectAttributeAction ¶
func (s *ObjectAttributeUpdate) SetObjectAttributeAction(v *ObjectAttributeAction) *ObjectAttributeUpdate
SetObjectAttributeAction sets the ObjectAttributeAction field's value.
func (*ObjectAttributeUpdate) SetObjectAttributeKey ¶
func (s *ObjectAttributeUpdate) SetObjectAttributeKey(v *AttributeKey) *ObjectAttributeUpdate
SetObjectAttributeKey sets the ObjectAttributeKey field's value.
func (ObjectAttributeUpdate) String ¶
func (s ObjectAttributeUpdate) String() string
String returns the string representation
func (*ObjectAttributeUpdate) Validate ¶
func (s *ObjectAttributeUpdate) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ObjectReference ¶
type ObjectReference struct { // Allows you to specify an object. You can identify an object in one of the // following ways: // // * $ObjectIdentifier - Identifies the object by ObjectIdentifier // // * /some/path - Identifies the object based on path // // * #SomeBatchReference - Identifies the object in a batch call Selector *string `type:"string"` // contains filtered or unexported fields }
Reference that identifies an object. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/ObjectReference
func (ObjectReference) GoString ¶
func (s ObjectReference) GoString() string
GoString returns the string representation
func (*ObjectReference) SetSelector ¶
func (s *ObjectReference) SetSelector(v string) *ObjectReference
SetSelector sets the Selector field's value.
func (ObjectReference) String ¶
func (s ObjectReference) String() string
String returns the string representation
type PathToObjectIdentifiers ¶ added in v1.7.8
type PathToObjectIdentifiers struct { // Lists ObjectIdentifiers starting from directory root to the object in the // request. ObjectIdentifiers []*string `type:"list"` // The path used to identify the object starting from directory root. Path *string `type:"string"` // contains filtered or unexported fields }
Returns the path to the ObjectIdentifiers associated with the directory. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PathToObjectIdentifiers
func (PathToObjectIdentifiers) GoString ¶ added in v1.7.8
func (s PathToObjectIdentifiers) GoString() string
GoString returns the string representation
func (*PathToObjectIdentifiers) SetObjectIdentifiers ¶ added in v1.7.8
func (s *PathToObjectIdentifiers) SetObjectIdentifiers(v []*string) *PathToObjectIdentifiers
SetObjectIdentifiers sets the ObjectIdentifiers field's value.
func (*PathToObjectIdentifiers) SetPath ¶ added in v1.7.8
func (s *PathToObjectIdentifiers) SetPath(v string) *PathToObjectIdentifiers
SetPath sets the Path field's value.
func (PathToObjectIdentifiers) String ¶ added in v1.7.8
func (s PathToObjectIdentifiers) String() string
String returns the string representation
type PolicyAttachment ¶
type PolicyAttachment struct { // The ObjectIdentifier associated with PolicyAttachment. ObjectIdentifier *string `type:"string"` // The ID of PolicyAttachment. PolicyId *string `type:"string"` // The type of policy that can be associated with PolicyAttachment. PolicyType *string `type:"string"` // contains filtered or unexported fields }
Contains the PolicyType, PolicyId, and the ObjectIdentifier to which it is attached. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PolicyAttachment
func (PolicyAttachment) GoString ¶
func (s PolicyAttachment) GoString() string
GoString returns the string representation
func (*PolicyAttachment) SetObjectIdentifier ¶
func (s *PolicyAttachment) SetObjectIdentifier(v string) *PolicyAttachment
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (*PolicyAttachment) SetPolicyId ¶
func (s *PolicyAttachment) SetPolicyId(v string) *PolicyAttachment
SetPolicyId sets the PolicyId field's value.
func (*PolicyAttachment) SetPolicyType ¶
func (s *PolicyAttachment) SetPolicyType(v string) *PolicyAttachment
SetPolicyType sets the PolicyType field's value.
func (PolicyAttachment) String ¶
func (s PolicyAttachment) String() string
String returns the string representation
type PolicyToPath ¶
type PolicyToPath struct { // The path that is referenced from the root. Path *string `type:"string"` // List of policy objects. Policies []*PolicyAttachment `type:"list"` // contains filtered or unexported fields }
Used when a regular object exists in a Directory and you want to find all of the policies associated with that object and the parent to that object. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PolicyToPath
func (PolicyToPath) GoString ¶
func (s PolicyToPath) GoString() string
GoString returns the string representation
func (*PolicyToPath) SetPath ¶
func (s *PolicyToPath) SetPath(v string) *PolicyToPath
SetPath sets the Path field's value.
func (*PolicyToPath) SetPolicies ¶
func (s *PolicyToPath) SetPolicies(v []*PolicyAttachment) *PolicyToPath
SetPolicies sets the Policies field's value.
func (PolicyToPath) String ¶
func (s PolicyToPath) String() string
String returns the string representation
type PublishSchemaInput ¶
type PublishSchemaInput struct { // ARN associated with the development schema. For more information, see arns. // // DevelopmentSchemaArn is a required field DevelopmentSchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // New name under which the schema will be published. If this is not provided, // the development schema is considered. Name *string `min:"1" type:"string"` // Version under which the schema will be published. // // Version is a required field Version *string `min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PublishSchemaRequest
func (PublishSchemaInput) GoString ¶
func (s PublishSchemaInput) GoString() string
GoString returns the string representation
func (*PublishSchemaInput) SetDevelopmentSchemaArn ¶
func (s *PublishSchemaInput) SetDevelopmentSchemaArn(v string) *PublishSchemaInput
SetDevelopmentSchemaArn sets the DevelopmentSchemaArn field's value.
func (*PublishSchemaInput) SetName ¶
func (s *PublishSchemaInput) SetName(v string) *PublishSchemaInput
SetName sets the Name field's value.
func (*PublishSchemaInput) SetVersion ¶
func (s *PublishSchemaInput) SetVersion(v string) *PublishSchemaInput
SetVersion sets the Version field's value.
func (PublishSchemaInput) String ¶
func (s PublishSchemaInput) String() string
String returns the string representation
func (*PublishSchemaInput) Validate ¶
func (s *PublishSchemaInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PublishSchemaOutput ¶
type PublishSchemaOutput struct { // ARN associated with the published schema. For more information, see arns. PublishedSchemaArn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PublishSchemaResponse
func (PublishSchemaOutput) GoString ¶
func (s PublishSchemaOutput) GoString() string
GoString returns the string representation
func (*PublishSchemaOutput) SetPublishedSchemaArn ¶
func (s *PublishSchemaOutput) SetPublishedSchemaArn(v string) *PublishSchemaOutput
SetPublishedSchemaArn sets the PublishedSchemaArn field's value.
func (PublishSchemaOutput) String ¶
func (s PublishSchemaOutput) String() string
String returns the string representation
type PutSchemaFromJsonInput ¶
type PutSchemaFromJsonInput struct { // The replacement JSON schema. // // Document is a required field Document *string `type:"string" required:"true"` // The ARN of the schema to update. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PutSchemaFromJsonRequest
func (PutSchemaFromJsonInput) GoString ¶
func (s PutSchemaFromJsonInput) GoString() string
GoString returns the string representation
func (*PutSchemaFromJsonInput) SetDocument ¶
func (s *PutSchemaFromJsonInput) SetDocument(v string) *PutSchemaFromJsonInput
SetDocument sets the Document field's value.
func (*PutSchemaFromJsonInput) SetSchemaArn ¶
func (s *PutSchemaFromJsonInput) SetSchemaArn(v string) *PutSchemaFromJsonInput
SetSchemaArn sets the SchemaArn field's value.
func (PutSchemaFromJsonInput) String ¶
func (s PutSchemaFromJsonInput) String() string
String returns the string representation
func (*PutSchemaFromJsonInput) Validate ¶
func (s *PutSchemaFromJsonInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutSchemaFromJsonOutput ¶
type PutSchemaFromJsonOutput struct { // The ARN of the schema to update. Arn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/PutSchemaFromJsonResponse
func (PutSchemaFromJsonOutput) GoString ¶
func (s PutSchemaFromJsonOutput) GoString() string
GoString returns the string representation
func (*PutSchemaFromJsonOutput) SetArn ¶
func (s *PutSchemaFromJsonOutput) SetArn(v string) *PutSchemaFromJsonOutput
SetArn sets the Arn field's value.
func (PutSchemaFromJsonOutput) String ¶
func (s PutSchemaFromJsonOutput) String() string
String returns the string representation
type RemoveFacetFromObjectInput ¶
type RemoveFacetFromObjectInput struct { // The ARN of the directory in which the object resides. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // A reference to the object to remove the facet from. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // The facet to remove. // // SchemaFacet is a required field SchemaFacet *SchemaFacet `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/RemoveFacetFromObjectRequest
func (RemoveFacetFromObjectInput) GoString ¶
func (s RemoveFacetFromObjectInput) GoString() string
GoString returns the string representation
func (*RemoveFacetFromObjectInput) SetDirectoryArn ¶
func (s *RemoveFacetFromObjectInput) SetDirectoryArn(v string) *RemoveFacetFromObjectInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*RemoveFacetFromObjectInput) SetObjectReference ¶
func (s *RemoveFacetFromObjectInput) SetObjectReference(v *ObjectReference) *RemoveFacetFromObjectInput
SetObjectReference sets the ObjectReference field's value.
func (*RemoveFacetFromObjectInput) SetSchemaFacet ¶
func (s *RemoveFacetFromObjectInput) SetSchemaFacet(v *SchemaFacet) *RemoveFacetFromObjectInput
SetSchemaFacet sets the SchemaFacet field's value.
func (RemoveFacetFromObjectInput) String ¶
func (s RemoveFacetFromObjectInput) String() string
String returns the string representation
func (*RemoveFacetFromObjectInput) Validate ¶
func (s *RemoveFacetFromObjectInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RemoveFacetFromObjectOutput ¶
type RemoveFacetFromObjectOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/RemoveFacetFromObjectResponse
func (RemoveFacetFromObjectOutput) GoString ¶
func (s RemoveFacetFromObjectOutput) GoString() string
GoString returns the string representation
func (RemoveFacetFromObjectOutput) String ¶
func (s RemoveFacetFromObjectOutput) String() string
String returns the string representation
type Rule ¶
type Rule struct { // Min and max parameters associated with the rule. Parameters map[string]*string `type:"map"` // The type of attribute validation rule. Type *string `type:"string" enum:"RuleType"` // contains filtered or unexported fields }
Contains an ARN and parameters associated with the rule. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/Rule
func (*Rule) SetParameters ¶
SetParameters sets the Parameters field's value.
type SchemaFacet ¶
type SchemaFacet struct { // The name of the facet. FacetName *string `min:"1" type:"string"` // The ARN of the schema that contains the facet. SchemaArn *string `type:"string"` // contains filtered or unexported fields }
A facet. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/SchemaFacet
func (SchemaFacet) GoString ¶
func (s SchemaFacet) GoString() string
GoString returns the string representation
func (*SchemaFacet) SetFacetName ¶
func (s *SchemaFacet) SetFacetName(v string) *SchemaFacet
SetFacetName sets the FacetName field's value.
func (*SchemaFacet) SetSchemaArn ¶
func (s *SchemaFacet) SetSchemaArn(v string) *SchemaFacet
SetSchemaArn sets the SchemaArn field's value.
func (SchemaFacet) String ¶
func (s SchemaFacet) String() string
String returns the string representation
func (*SchemaFacet) Validate ¶
func (s *SchemaFacet) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type Tag ¶
type Tag struct { // Key associated with the tag. Key *string `type:"string"` // Value associated with the tag. Value *string `type:"string"` // contains filtered or unexported fields }
Tag structure which contains tag key and value. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/Tag
type TagResourceInput ¶
type TagResourceInput struct { // ARN of the resource. Tagging is only supported for directories. // // ResourceArn is a required field ResourceArn *string `type:"string" required:"true"` // List of tag key value pairs. // // Tags is a required field Tags []*Tag `type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TagResourceRequest
func (TagResourceInput) GoString ¶
func (s TagResourceInput) GoString() string
GoString returns the string representation
func (*TagResourceInput) SetResourceArn ¶
func (s *TagResourceInput) SetResourceArn(v string) *TagResourceInput
SetResourceArn sets the ResourceArn field's value.
func (*TagResourceInput) SetTags ¶
func (s *TagResourceInput) SetTags(v []*Tag) *TagResourceInput
SetTags sets the Tags field's value.
func (TagResourceInput) String ¶
func (s TagResourceInput) String() string
String returns the string representation
func (*TagResourceInput) Validate ¶
func (s *TagResourceInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type TagResourceOutput ¶
type TagResourceOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TagResourceResponse
func (TagResourceOutput) GoString ¶
func (s TagResourceOutput) GoString() string
GoString returns the string representation
func (TagResourceOutput) String ¶
func (s TagResourceOutput) String() string
String returns the string representation
type TypedAttributeValue ¶
type TypedAttributeValue struct { // A binary data value. // // BinaryValue is automatically base64 encoded/decoded by the SDK. BinaryValue []byte `type:"blob"` // A Boolean data value. BooleanValue *bool `type:"boolean"` // A date and time value. DatetimeValue *time.Time `type:"timestamp" timestampFormat:"unix"` // A number data value. NumberValue *string `type:"string"` // A string data value. StringValue *string `type:"string"` // contains filtered or unexported fields }
Represents the data for a typed attribute. You can set one, and only one, of the elements. Each attribute in an item is a name-value pair. Attributes have a single value. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TypedAttributeValue
func (TypedAttributeValue) GoString ¶
func (s TypedAttributeValue) GoString() string
GoString returns the string representation
func (*TypedAttributeValue) SetBinaryValue ¶
func (s *TypedAttributeValue) SetBinaryValue(v []byte) *TypedAttributeValue
SetBinaryValue sets the BinaryValue field's value.
func (*TypedAttributeValue) SetBooleanValue ¶
func (s *TypedAttributeValue) SetBooleanValue(v bool) *TypedAttributeValue
SetBooleanValue sets the BooleanValue field's value.
func (*TypedAttributeValue) SetDatetimeValue ¶
func (s *TypedAttributeValue) SetDatetimeValue(v time.Time) *TypedAttributeValue
SetDatetimeValue sets the DatetimeValue field's value.
func (*TypedAttributeValue) SetNumberValue ¶
func (s *TypedAttributeValue) SetNumberValue(v string) *TypedAttributeValue
SetNumberValue sets the NumberValue field's value.
func (*TypedAttributeValue) SetStringValue ¶
func (s *TypedAttributeValue) SetStringValue(v string) *TypedAttributeValue
SetStringValue sets the StringValue field's value.
func (TypedAttributeValue) String ¶
func (s TypedAttributeValue) String() string
String returns the string representation
type TypedAttributeValueRange ¶
type TypedAttributeValueRange struct { // Inclusive or exclusive range end. // // EndMode is a required field EndMode *string `type:"string" required:"true" enum:"RangeMode"` // The attribute value to terminate the range at. EndValue *TypedAttributeValue `type:"structure"` // Inclusive or exclusive range start. // // StartMode is a required field StartMode *string `type:"string" required:"true" enum:"RangeMode"` // The value to start the range at. StartValue *TypedAttributeValue `type:"structure"` // contains filtered or unexported fields }
A range of attribute values. Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/TypedAttributeValueRange
func (TypedAttributeValueRange) GoString ¶
func (s TypedAttributeValueRange) GoString() string
GoString returns the string representation
func (*TypedAttributeValueRange) SetEndMode ¶
func (s *TypedAttributeValueRange) SetEndMode(v string) *TypedAttributeValueRange
SetEndMode sets the EndMode field's value.
func (*TypedAttributeValueRange) SetEndValue ¶
func (s *TypedAttributeValueRange) SetEndValue(v *TypedAttributeValue) *TypedAttributeValueRange
SetEndValue sets the EndValue field's value.
func (*TypedAttributeValueRange) SetStartMode ¶
func (s *TypedAttributeValueRange) SetStartMode(v string) *TypedAttributeValueRange
SetStartMode sets the StartMode field's value.
func (*TypedAttributeValueRange) SetStartValue ¶
func (s *TypedAttributeValueRange) SetStartValue(v *TypedAttributeValue) *TypedAttributeValueRange
SetStartValue sets the StartValue field's value.
func (TypedAttributeValueRange) String ¶
func (s TypedAttributeValueRange) String() string
String returns the string representation
func (*TypedAttributeValueRange) Validate ¶
func (s *TypedAttributeValueRange) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UntagResourceInput ¶
type UntagResourceInput struct { // ARN of the resource. Tagging is only supported for directories. // // ResourceArn is a required field ResourceArn *string `type:"string" required:"true"` // Keys of the tag that needs to be removed from the resource. // // TagKeys is a required field TagKeys []*string `type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UntagResourceRequest
func (UntagResourceInput) GoString ¶
func (s UntagResourceInput) GoString() string
GoString returns the string representation
func (*UntagResourceInput) SetResourceArn ¶
func (s *UntagResourceInput) SetResourceArn(v string) *UntagResourceInput
SetResourceArn sets the ResourceArn field's value.
func (*UntagResourceInput) SetTagKeys ¶
func (s *UntagResourceInput) SetTagKeys(v []*string) *UntagResourceInput
SetTagKeys sets the TagKeys field's value.
func (UntagResourceInput) String ¶
func (s UntagResourceInput) String() string
String returns the string representation
func (*UntagResourceInput) Validate ¶
func (s *UntagResourceInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UntagResourceOutput ¶
type UntagResourceOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UntagResourceResponse
func (UntagResourceOutput) GoString ¶
func (s UntagResourceOutput) GoString() string
GoString returns the string representation
func (UntagResourceOutput) String ¶
func (s UntagResourceOutput) String() string
String returns the string representation
type UpdateFacetInput ¶
type UpdateFacetInput struct { // List of attributes that need to be updated in a given schema Facet. Each // attribute is followed by AttributeAction, which specifies the type of update // operation to perform. AttributeUpdates []*FacetAttributeUpdate `type:"list"` // Name is a required field Name *string `min:"1" type:"string" required:"true"` // Object type associated with the facet. See CreateFacetRequest$ObjectType // for more details. ObjectType *string `type:"string" enum:"ObjectType"` // ARN associated with the Facet. For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateFacetRequest
func (UpdateFacetInput) GoString ¶
func (s UpdateFacetInput) GoString() string
GoString returns the string representation
func (*UpdateFacetInput) SetAttributeUpdates ¶
func (s *UpdateFacetInput) SetAttributeUpdates(v []*FacetAttributeUpdate) *UpdateFacetInput
SetAttributeUpdates sets the AttributeUpdates field's value.
func (*UpdateFacetInput) SetName ¶
func (s *UpdateFacetInput) SetName(v string) *UpdateFacetInput
SetName sets the Name field's value.
func (*UpdateFacetInput) SetObjectType ¶
func (s *UpdateFacetInput) SetObjectType(v string) *UpdateFacetInput
SetObjectType sets the ObjectType field's value.
func (*UpdateFacetInput) SetSchemaArn ¶
func (s *UpdateFacetInput) SetSchemaArn(v string) *UpdateFacetInput
SetSchemaArn sets the SchemaArn field's value.
func (UpdateFacetInput) String ¶
func (s UpdateFacetInput) String() string
String returns the string representation
func (*UpdateFacetInput) Validate ¶
func (s *UpdateFacetInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateFacetOutput ¶
type UpdateFacetOutput struct {
// contains filtered or unexported fields
}
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateFacetResponse
func (UpdateFacetOutput) GoString ¶
func (s UpdateFacetOutput) GoString() string
GoString returns the string representation
func (UpdateFacetOutput) String ¶
func (s UpdateFacetOutput) String() string
String returns the string representation
type UpdateObjectAttributesInput ¶
type UpdateObjectAttributesInput struct { // Attributes update structure. // // AttributeUpdates is a required field AttributeUpdates []*ObjectAttributeUpdate `type:"list" required:"true"` // ARN associated with the Directory where the object resides. For more information, // see arns. // // DirectoryArn is a required field DirectoryArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // Reference that identifies the object. // // ObjectReference is a required field ObjectReference *ObjectReference `type:"structure" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateObjectAttributesRequest
func (UpdateObjectAttributesInput) GoString ¶
func (s UpdateObjectAttributesInput) GoString() string
GoString returns the string representation
func (*UpdateObjectAttributesInput) SetAttributeUpdates ¶
func (s *UpdateObjectAttributesInput) SetAttributeUpdates(v []*ObjectAttributeUpdate) *UpdateObjectAttributesInput
SetAttributeUpdates sets the AttributeUpdates field's value.
func (*UpdateObjectAttributesInput) SetDirectoryArn ¶
func (s *UpdateObjectAttributesInput) SetDirectoryArn(v string) *UpdateObjectAttributesInput
SetDirectoryArn sets the DirectoryArn field's value.
func (*UpdateObjectAttributesInput) SetObjectReference ¶
func (s *UpdateObjectAttributesInput) SetObjectReference(v *ObjectReference) *UpdateObjectAttributesInput
SetObjectReference sets the ObjectReference field's value.
func (UpdateObjectAttributesInput) String ¶
func (s UpdateObjectAttributesInput) String() string
String returns the string representation
func (*UpdateObjectAttributesInput) Validate ¶
func (s *UpdateObjectAttributesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateObjectAttributesOutput ¶
type UpdateObjectAttributesOutput struct { // ObjectIdentifier of the updated object. ObjectIdentifier *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateObjectAttributesResponse
func (UpdateObjectAttributesOutput) GoString ¶
func (s UpdateObjectAttributesOutput) GoString() string
GoString returns the string representation
func (*UpdateObjectAttributesOutput) SetObjectIdentifier ¶
func (s *UpdateObjectAttributesOutput) SetObjectIdentifier(v string) *UpdateObjectAttributesOutput
SetObjectIdentifier sets the ObjectIdentifier field's value.
func (UpdateObjectAttributesOutput) String ¶
func (s UpdateObjectAttributesOutput) String() string
String returns the string representation
type UpdateSchemaInput ¶
type UpdateSchemaInput struct { // Name of the schema. // // Name is a required field Name *string `min:"1" type:"string" required:"true"` // ARN of the development schema. For more information, see arns. // // SchemaArn is a required field SchemaArn *string `location:"header" locationName:"x-amz-data-partition" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateSchemaRequest
func (UpdateSchemaInput) GoString ¶
func (s UpdateSchemaInput) GoString() string
GoString returns the string representation
func (*UpdateSchemaInput) SetName ¶
func (s *UpdateSchemaInput) SetName(v string) *UpdateSchemaInput
SetName sets the Name field's value.
func (*UpdateSchemaInput) SetSchemaArn ¶
func (s *UpdateSchemaInput) SetSchemaArn(v string) *UpdateSchemaInput
SetSchemaArn sets the SchemaArn field's value.
func (UpdateSchemaInput) String ¶
func (s UpdateSchemaInput) String() string
String returns the string representation
func (*UpdateSchemaInput) Validate ¶
func (s *UpdateSchemaInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateSchemaOutput ¶
type UpdateSchemaOutput struct { // ARN associated with the updated schema. For more information, see arns. SchemaArn *string `type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/clouddirectory-2016-05-10/UpdateSchemaResponse
func (UpdateSchemaOutput) GoString ¶
func (s UpdateSchemaOutput) GoString() string
GoString returns the string representation
func (*UpdateSchemaOutput) SetSchemaArn ¶
func (s *UpdateSchemaOutput) SetSchemaArn(v string) *UpdateSchemaOutput
SetSchemaArn sets the SchemaArn field's value.
func (UpdateSchemaOutput) String ¶
func (s UpdateSchemaOutput) String() string
String returns the string representation
Directories ¶
Path | Synopsis |
---|---|
Package clouddirectoryiface provides an interface to enable mocking the Amazon CloudDirectory service client for testing your code.
|
Package clouddirectoryiface provides an interface to enable mocking the Amazon CloudDirectory service client for testing your code. |