directoryservice

package
v1.2.6 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 19, 2016 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Overview

Package directoryservice provides a client for AWS Directory Service.

Index

Examples

Constants

View Source 
const (
	// @enum DirectorySize
	DirectorySizeSmall = "Small"
	// @enum DirectorySize
	DirectorySizeLarge = "Large"
)
View Source 
const (
	// @enum DirectoryStage
	DirectoryStageRequested = "Requested"
	// @enum DirectoryStage
	DirectoryStageCreating = "Creating"
	// @enum DirectoryStage
	DirectoryStageCreated = "Created"
	// @enum DirectoryStage
	DirectoryStageActive = "Active"
	// @enum DirectoryStage
	DirectoryStageInoperable = "Inoperable"
	// @enum DirectoryStage
	DirectoryStageImpaired = "Impaired"
	// @enum DirectoryStage
	DirectoryStageRestoring = "Restoring"
	// @enum DirectoryStage
	DirectoryStageRestoreFailed = "RestoreFailed"
	// @enum DirectoryStage
	DirectoryStageDeleting = "Deleting"
	// @enum DirectoryStage
	DirectoryStageDeleted = "Deleted"
	// @enum DirectoryStage
	DirectoryStageFailed = "Failed"
)
View Source 
const (
	// @enum DirectoryType
	DirectoryTypeSimpleAd = "SimpleAD"
	// @enum DirectoryType
	DirectoryTypeAdconnector = "ADConnector"
	// @enum DirectoryType
	DirectoryTypeMicrosoftAd = "MicrosoftAD"
)
View Source 
const (
	// @enum RadiusAuthenticationProtocol
	RadiusAuthenticationProtocolPap = "PAP"
	// @enum RadiusAuthenticationProtocol
	RadiusAuthenticationProtocolChap = "CHAP"
	// @enum RadiusAuthenticationProtocol
	RadiusAuthenticationProtocolMsChapv1 = "MS-CHAPv1"
	// @enum RadiusAuthenticationProtocol
	RadiusAuthenticationProtocolMsChapv2 = "MS-CHAPv2"
)
View Source 
const (
	// @enum RadiusStatus
	RadiusStatusCreating = "Creating"
	// @enum RadiusStatus
	RadiusStatusCompleted = "Completed"
	// @enum RadiusStatus
	RadiusStatusFailed = "Failed"
)
View Source 
const (
	// @enum SnapshotStatus
	SnapshotStatusCreating = "Creating"
	// @enum SnapshotStatus
	SnapshotStatusCompleted = "Completed"
	// @enum SnapshotStatus
	SnapshotStatusFailed = "Failed"
)
View Source 
const (
	// @enum SnapshotType
	SnapshotTypeAuto = "Auto"
	// @enum SnapshotType
	SnapshotTypeManual = "Manual"
)
View Source 
const (
	// @enum TopicStatus
	TopicStatusRegistered = "Registered"
	// @enum TopicStatus
	TopicStatusTopicnotfound = "Topic not found"
	// @enum TopicStatus
	TopicStatusFailed = "Failed"
	// @enum TopicStatus
	TopicStatusDeleted = "Deleted"
)
View Source 
const (
	// @enum TrustDirection
	TrustDirectionOneWayOutgoing = "One-Way: Outgoing"
	// @enum TrustDirection
	TrustDirectionOneWayIncoming = "One-Way: Incoming"
	// @enum TrustDirection
	TrustDirectionTwoWay = "Two-Way"
)
View Source 
const (
	// @enum TrustState
	TrustStateCreating = "Creating"
	// @enum TrustState
	TrustStateCreated = "Created"
	// @enum TrustState
	TrustStateVerifying = "Verifying"
	// @enum TrustState
	TrustStateVerifyFailed = "VerifyFailed"
	// @enum TrustState
	TrustStateVerified = "Verified"
	// @enum TrustState
	TrustStateDeleting = "Deleting"
	// @enum TrustState
	TrustStateDeleted = "Deleted"
	// @enum TrustState
	TrustStateFailed = "Failed"
)
View Source 
const (
	// @enum ReplicationScope
	ReplicationScopeDomain = "Domain"
)
View Source 
const ServiceName = "ds"

A ServiceName is the name of the service the client will make API calls to.

View Source 
const (
	// @enum TrustType
	TrustTypeForest = "Forest"
)

Variables

This section is empty.

Functions

This section is empty.

Types

type AddTagsToResourceInput added in v1.2.5 

type AddTagsToResourceInput struct {

	// The ID of the directory to which to add the tag.
	ResourceId *string `type:"string" required:"true"`

	// The tags to be assigned to the Amazon Directory Services directory.
	Tags []*Tag `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (AddTagsToResourceInput) GoString added in v1.2.5 

func (s AddTagsToResourceInput) GoString() string

GoString returns the string representation

func (AddTagsToResourceInput) String added in v1.2.5 

func (s AddTagsToResourceInput) String() string

String returns the string representation

func (*AddTagsToResourceInput) Validate added in v1.2.5 

func (s *AddTagsToResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddTagsToResourceOutput added in v1.2.5 

type AddTagsToResourceOutput struct {
	// contains filtered or unexported fields
}

func (AddTagsToResourceOutput) GoString added in v1.2.5 

func (s AddTagsToResourceOutput) GoString() string

GoString returns the string representation

func (AddTagsToResourceOutput) String added in v1.2.5 

func (s AddTagsToResourceOutput) String() string

String returns the string representation

type Attribute 

type Attribute struct {

	// The name of the attribute.
	Name *string `min:"1" type:"string"`

	// The value of the attribute.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

Represents a named directory attribute.

func (Attribute) GoString added in v0.6.6 

func (s Attribute) GoString() string

GoString returns the string representation

func (Attribute) String added in v0.6.6 

func (s Attribute) String() string

String returns the string representation

func (*Attribute) Validate added in v1.1.22 

func (s *Attribute) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Computer 

type Computer struct {

	// An array of Attribute objects containing the LDAP attributes that belong
	// to the computer account.
	ComputerAttributes []*Attribute `type:"list"`

	// The identifier of the computer.
	ComputerId *string `min:"1" type:"string"`

	// The computer name.
	ComputerName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

Contains information about a computer account in a directory.

func (Computer) GoString added in v0.6.6 

func (s Computer) GoString() string

GoString returns the string representation

func (Computer) String added in v0.6.6 

func (s Computer) String() string

String returns the string representation

type ConditionalForwarder added in v1.1.19 

type ConditionalForwarder struct {

	// The IP addresses of the remote DNS server associated with RemoteDomainName.
	// This is the IP address of the DNS server that your conditional forwarder
	// points to.
	DnsIpAddrs []*string `type:"list"`

	// The fully qualified domain name (FQDN) of the remote domains pointed to by
	// the conditional forwarder.
	RemoteDomainName *string `type:"string"`

	// The replication scope of the conditional forwarder. The only allowed value
	// is Domain, which will replicate the conditional forwarder to all of the domain
	// controllers for your AWS directory.
	ReplicationScope *string `type:"string" enum:"ReplicationScope"`
	// contains filtered or unexported fields
}

Points to a remote domain with which you are setting up a trust relationship. Conditional forwarders are required in order to set up a trust relationship with another domain.

func (ConditionalForwarder) GoString added in v1.1.19 

func (s ConditionalForwarder) GoString() string

GoString returns the string representation

func (ConditionalForwarder) String added in v1.1.19 

func (s ConditionalForwarder) String() string

String returns the string representation

type ConnectDirectoryInput 

type ConnectDirectoryInput struct {

	// A DirectoryConnectSettings object that contains additional information for
	// the operation.
	ConnectSettings *DirectoryConnectSettings `type:"structure" required:"true"`

	// A textual description for the directory.
	Description *string `type:"string"`

	// The fully-qualified name of the on-premises directory, such as corp.example.com.
	Name *string `type:"string" required:"true"`

	// The password for the on-premises user account.
	Password *string `min:"1" type:"string" required:"true"`

	// The NetBIOS name of the on-premises directory, such as CORP.
	ShortName *string `type:"string"`

	// The size of the directory.
	Size *string `type:"string" required:"true" enum:"DirectorySize"`
	// contains filtered or unexported fields
}

Contains the inputs for the ConnectDirectory operation.

func (ConnectDirectoryInput) GoString added in v0.6.6 

func (s ConnectDirectoryInput) GoString() string

GoString returns the string representation

func (ConnectDirectoryInput) String added in v0.6.6 

func (s ConnectDirectoryInput) String() string

String returns the string representation

func (*ConnectDirectoryInput) Validate added in v1.1.22 

func (s *ConnectDirectoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConnectDirectoryOutput 

type ConnectDirectoryOutput struct {

	// The identifier of the new directory.
	DirectoryId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the ConnectDirectory operation.

func (ConnectDirectoryOutput) GoString added in v0.6.6 

func (s ConnectDirectoryOutput) GoString() string

GoString returns the string representation

func (ConnectDirectoryOutput) String added in v0.6.6 

func (s ConnectDirectoryOutput) String() string

String returns the string representation

type CreateAliasInput 

type CreateAliasInput struct {

	// The requested alias.
	//
	// The alias must be unique amongst all aliases in AWS. This operation throws
	// an EntityAlreadyExistsException error if the alias already exists.
	Alias *string `min:"1" type:"string" required:"true"`

	// The identifier of the directory for which to create the alias.
	DirectoryId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the CreateAlias operation.

func (CreateAliasInput) GoString added in v0.6.6 

func (s CreateAliasInput) GoString() string

GoString returns the string representation

func (CreateAliasInput) String added in v0.6.6 

func (s CreateAliasInput) String() string

String returns the string representation

func (*CreateAliasInput) Validate added in v1.1.22 

func (s *CreateAliasInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateAliasOutput 

type CreateAliasOutput struct {

	// The alias for the directory.
	Alias *string `min:"1" type:"string"`

	// The identifier of the directory.
	DirectoryId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the CreateAlias operation.

func (CreateAliasOutput) GoString added in v0.6.6 

func (s CreateAliasOutput) GoString() string

GoString returns the string representation

func (CreateAliasOutput) String added in v0.6.6 

func (s CreateAliasOutput) String() string

String returns the string representation

type CreateComputerInput 

type CreateComputerInput struct {

	// An array of Attribute objects that contain any LDAP attributes to apply to
	// the computer account.
	ComputerAttributes []*Attribute `type:"list"`

	// The name of the computer account.
	ComputerName *string `min:"1" type:"string" required:"true"`

	// The identifier of the directory in which to create the computer account.
	DirectoryId *string `type:"string" required:"true"`

	// The fully-qualified distinguished name of the organizational unit to place
	// the computer account in.
	OrganizationalUnitDistinguishedName *string `min:"1" type:"string"`

	// A one-time password that is used to join the computer to the directory. You
	// should generate a random, strong password to use for this parameter.
	Password *string `min:"8" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the CreateComputer operation.

func (CreateComputerInput) GoString added in v0.6.6 

func (s CreateComputerInput) GoString() string

GoString returns the string representation

func (CreateComputerInput) String added in v0.6.6 

func (s CreateComputerInput) String() string

String returns the string representation

func (*CreateComputerInput) Validate added in v1.1.22 

func (s *CreateComputerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateComputerOutput 

type CreateComputerOutput struct {

	// A Computer object that represents the computer account.
	Computer *Computer `type:"structure"`
	// contains filtered or unexported fields
}

Contains the results for the CreateComputer operation.

func (CreateComputerOutput) GoString added in v0.6.6 

func (s CreateComputerOutput) GoString() string

GoString returns the string representation

func (CreateComputerOutput) String added in v0.6.6 

func (s CreateComputerOutput) String() string

String returns the string representation

type CreateConditionalForwarderInput added in v1.1.19 

type CreateConditionalForwarderInput struct {

	// The directory ID of the AWS directory for which you are creating the conditional
	// forwarder.
	DirectoryId *string `type:"string" required:"true"`

	// The IP addresses of the remote DNS server associated with RemoteDomainName.
	DnsIpAddrs []*string `type:"list" required:"true"`

	// The fully qualified domain name (FQDN) of the remote domain with which you
	// will set up a trust relationship.
	RemoteDomainName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Initiates the creation of a conditional forwarder for your AWS Directory Service for Microsoft Active Directory. Conditional forwarders are required in order to set up a trust relationship with another domain.

func (CreateConditionalForwarderInput) GoString added in v1.1.19 

func (s CreateConditionalForwarderInput) GoString() string

GoString returns the string representation

func (CreateConditionalForwarderInput) String added in v1.1.19 

func (s CreateConditionalForwarderInput) String() string

String returns the string representation

func (*CreateConditionalForwarderInput) Validate added in v1.1.22 

func (s *CreateConditionalForwarderInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateConditionalForwarderOutput added in v1.1.19 

type CreateConditionalForwarderOutput struct {
	// contains filtered or unexported fields
}

The result of a CreateConditinalForwarder request.

func (CreateConditionalForwarderOutput) GoString added in v1.1.19 

func (s CreateConditionalForwarderOutput) GoString() string

GoString returns the string representation

func (CreateConditionalForwarderOutput) String added in v1.1.19 

func (s CreateConditionalForwarderOutput) String() string

String returns the string representation

type CreateDirectoryInput 

type CreateDirectoryInput struct {

	// A textual description for the directory.
	Description *string `type:"string"`

	// The fully qualified name for the directory, such as corp.example.com.
	Name *string `type:"string" required:"true"`

	// The password for the directory administrator. The directory creation process
	// creates a directory administrator account with the username Administrator
	// and this password.
	Password *string `type:"string" required:"true"`

	// The short name of the directory, such as CORP.
	ShortName *string `type:"string"`

	// The size of the directory.
	Size *string `type:"string" required:"true" enum:"DirectorySize"`

	// A DirectoryVpcSettings object that contains additional information for the
	// operation.
	VpcSettings *DirectoryVpcSettings `type:"structure"`
	// contains filtered or unexported fields
}

Contains the inputs for the CreateDirectory operation.

func (CreateDirectoryInput) GoString added in v0.6.6 

func (s CreateDirectoryInput) GoString() string

GoString returns the string representation

func (CreateDirectoryInput) String added in v0.6.6 

func (s CreateDirectoryInput) String() string

String returns the string representation

func (*CreateDirectoryInput) Validate added in v1.1.22 

func (s *CreateDirectoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDirectoryOutput 

type CreateDirectoryOutput struct {

	// The identifier of the directory that was created.
	DirectoryId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the CreateDirectory operation.

func (CreateDirectoryOutput) GoString added in v0.6.6 

func (s CreateDirectoryOutput) GoString() string

GoString returns the string representation

func (CreateDirectoryOutput) String added in v0.6.6 

func (s CreateDirectoryOutput) String() string

String returns the string representation

type CreateMicrosoftADInput added in v1.0.5 

type CreateMicrosoftADInput struct {

	// A textual description for the directory. This label will appear on the AWS
	// console Directory Details page after the directory is created.
	Description *string `type:"string"`

	// The fully qualified domain name for the directory, such as corp.example.com.
	// This name will resolve inside your VPC only. It does not need to be publicly
	// resolvable.
	Name *string `type:"string" required:"true"`

	// The password for the default administrative user named Admin.
	Password *string `type:"string" required:"true"`

	// The NetBIOS name for your domain. A short identifier for your domain, such
	// as CORP. If you don't specify a NetBIOS name, it will default to the first
	// part of your directory DNS. For example, CORP for the directory DNS corp.example.com.
	ShortName *string `type:"string"`

	// Contains VPC information for the CreateDirectory or CreateMicrosoftAD operation.
	VpcSettings *DirectoryVpcSettings `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Creates a Microsoft AD in the AWS cloud.

func (CreateMicrosoftADInput) GoString added in v1.0.5 

func (s CreateMicrosoftADInput) GoString() string

GoString returns the string representation

func (CreateMicrosoftADInput) String added in v1.0.5 

func (s CreateMicrosoftADInput) String() string

String returns the string representation

func (*CreateMicrosoftADInput) Validate added in v1.1.22 

func (s *CreateMicrosoftADInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateMicrosoftADOutput added in v1.0.5 

type CreateMicrosoftADOutput struct {

	// The identifier of the directory that was created.
	DirectoryId *string `type:"string"`
	// contains filtered or unexported fields
}

Result of a CreateMicrosoftAD request.

func (CreateMicrosoftADOutput) GoString added in v1.0.5 

func (s CreateMicrosoftADOutput) GoString() string

GoString returns the string representation

func (CreateMicrosoftADOutput) String added in v1.0.5 

func (s CreateMicrosoftADOutput) String() string

String returns the string representation

type CreateSnapshotInput 

type CreateSnapshotInput struct {

	// The identifier of the directory of which to take a snapshot.
	DirectoryId *string `type:"string" required:"true"`

	// The descriptive name to apply to the snapshot.
	Name *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the inputs for the CreateSnapshot operation.

func (CreateSnapshotInput) GoString added in v0.6.6 

func (s CreateSnapshotInput) GoString() string

GoString returns the string representation

func (CreateSnapshotInput) String added in v0.6.6 

func (s CreateSnapshotInput) String() string

String returns the string representation

func (*CreateSnapshotInput) Validate added in v1.1.22 

func (s *CreateSnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateSnapshotOutput 

type CreateSnapshotOutput struct {

	// The identifier of the snapshot that was created.
	SnapshotId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the CreateSnapshot operation.

func (CreateSnapshotOutput) GoString added in v0.6.6 

func (s CreateSnapshotOutput) GoString() string

GoString returns the string representation

func (CreateSnapshotOutput) String added in v0.6.6 

func (s CreateSnapshotOutput) String() string

String returns the string representation

type CreateTrustInput added in v1.0.5 

type CreateTrustInput struct {

	// The IP addresses of the remote DNS server associated with RemoteDomainName.
	ConditionalForwarderIpAddrs []*string `type:"list"`

	// The Directory ID of the Microsoft AD in the AWS cloud for which to establish
	// the trust relationship.
	DirectoryId *string `type:"string" required:"true"`

	// The Fully Qualified Domain Name (FQDN) of the external domain for which to
	// create the trust relationship.
	RemoteDomainName *string `type:"string" required:"true"`

	// The direction of the trust relationship.
	TrustDirection *string `type:"string" required:"true" enum:"TrustDirection"`

	// The trust password. The must be the same password that was used when creating
	// the trust relationship on the external domain.
	TrustPassword *string `min:"1" type:"string" required:"true"`

	// The trust relationship type.
	TrustType *string `type:"string" enum:"TrustType"`
	// contains filtered or unexported fields
}

AWS Directory Service for Microsoft Active Directory allows you to configure trust relationships. For example, you can establish a trust between your Microsoft AD in the AWS cloud, and your existing on-premises Microsoft Active Directory. This would allow you to provide users and groups access to resources in either domain, with a single set of credentials.

This action initiates the creation of the AWS side of a trust relationship between a Microsoft AD in the AWS cloud and an external domain.

func (CreateTrustInput) GoString added in v1.0.5 

func (s CreateTrustInput) GoString() string

GoString returns the string representation

func (CreateTrustInput) String added in v1.0.5 

func (s CreateTrustInput) String() string

String returns the string representation

func (*CreateTrustInput) Validate added in v1.1.22 

func (s *CreateTrustInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrustOutput added in v1.0.5 

type CreateTrustOutput struct {

	// A unique identifier for the trust relationship that was created.
	TrustId *string `type:"string"`
	// contains filtered or unexported fields
}

The result of a CreateTrust request.

func (CreateTrustOutput) GoString added in v1.0.5 

func (s CreateTrustOutput) GoString() string

GoString returns the string representation

func (CreateTrustOutput) String added in v1.0.5 

func (s CreateTrustOutput) String() string

String returns the string representation

type DeleteConditionalForwarderInput added in v1.1.19 

type DeleteConditionalForwarderInput struct {

	// The directory ID for which you are deleting the conditional forwarder.
	DirectoryId *string `type:"string" required:"true"`

	// The fully qualified domain name (FQDN) of the remote domain with which you
	// are deleting the conditional forwarder.
	RemoteDomainName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Deletes a conditional forwarder.

func (DeleteConditionalForwarderInput) GoString added in v1.1.19 

func (s DeleteConditionalForwarderInput) GoString() string

GoString returns the string representation

func (DeleteConditionalForwarderInput) String added in v1.1.19 

func (s DeleteConditionalForwarderInput) String() string

String returns the string representation

func (*DeleteConditionalForwarderInput) Validate added in v1.1.22 

func (s *DeleteConditionalForwarderInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteConditionalForwarderOutput added in v1.1.19 

type DeleteConditionalForwarderOutput struct {
	// contains filtered or unexported fields
}

The result of a DeleteConditionalForwarder request.

func (DeleteConditionalForwarderOutput) GoString added in v1.1.19 

func (s DeleteConditionalForwarderOutput) GoString() string

GoString returns the string representation

func (DeleteConditionalForwarderOutput) String added in v1.1.19 

func (s DeleteConditionalForwarderOutput) String() string

String returns the string representation

type DeleteDirectoryInput 

type DeleteDirectoryInput struct {

	// The identifier of the directory to delete.
	DirectoryId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the DeleteDirectory operation.

func (DeleteDirectoryInput) GoString added in v0.6.6 

func (s DeleteDirectoryInput) GoString() string

GoString returns the string representation

func (DeleteDirectoryInput) String added in v0.6.6 

func (s DeleteDirectoryInput) String() string

String returns the string representation

func (*DeleteDirectoryInput) Validate added in v1.1.22 

func (s *DeleteDirectoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDirectoryOutput 

type DeleteDirectoryOutput struct {

	// The directory identifier.
	DirectoryId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the DeleteDirectory operation.

func (DeleteDirectoryOutput) GoString added in v0.6.6 

func (s DeleteDirectoryOutput) GoString() string

GoString returns the string representation

func (DeleteDirectoryOutput) String added in v0.6.6 

func (s DeleteDirectoryOutput) String() string

String returns the string representation

type DeleteSnapshotInput 

type DeleteSnapshotInput struct {

	// The identifier of the directory snapshot to be deleted.
	SnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the DeleteSnapshot operation.

func (DeleteSnapshotInput) GoString added in v0.6.6 

func (s DeleteSnapshotInput) GoString() string

GoString returns the string representation

func (DeleteSnapshotInput) String added in v0.6.6 

func (s DeleteSnapshotInput) String() string

String returns the string representation

func (*DeleteSnapshotInput) Validate added in v1.1.22 

func (s *DeleteSnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteSnapshotOutput 

type DeleteSnapshotOutput struct {

	// The identifier of the directory snapshot that was deleted.
	SnapshotId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the DeleteSnapshot operation.

func (DeleteSnapshotOutput) GoString added in v0.6.6 

func (s DeleteSnapshotOutput) GoString() string

GoString returns the string representation

func (DeleteSnapshotOutput) String added in v0.6.6 

func (s DeleteSnapshotOutput) String() string

String returns the string representation

type DeleteTrustInput added in v1.0.5 

type DeleteTrustInput struct {

	// Delete a conditional forwarder as part of a DeleteTrustRequest.
	DeleteAssociatedConditionalForwarder *bool `type:"boolean"`

	// The Trust ID of the trust relationship to be deleted.
	TrustId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Deletes the local side of an existing trust relationship between the Microsoft AD in the AWS cloud and the external domain.

func (DeleteTrustInput) GoString added in v1.0.5 

func (s DeleteTrustInput) GoString() string

GoString returns the string representation

func (DeleteTrustInput) String added in v1.0.5 

func (s DeleteTrustInput) String() string

String returns the string representation

func (*DeleteTrustInput) Validate added in v1.1.22 

func (s *DeleteTrustInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrustOutput added in v1.0.5 

type DeleteTrustOutput struct {

	// The Trust ID of the trust relationship that was deleted.
	TrustId *string `type:"string"`
	// contains filtered or unexported fields
}

The result of a DeleteTrust request.

func (DeleteTrustOutput) GoString added in v1.0.5 

func (s DeleteTrustOutput) GoString() string

GoString returns the string representation

func (DeleteTrustOutput) String added in v1.0.5 

func (s DeleteTrustOutput) String() string

String returns the string representation

type DeregisterEventTopicInput added in v1.1.16 

type DeregisterEventTopicInput struct {

	// The Directory ID to remove as a publisher. This directory will no longer
	// send messages to the specified SNS topic.
	DirectoryId *string `type:"string" required:"true"`

	// The name of the SNS topic from which to remove the directory as a publisher.
	TopicName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Removes the specified directory as a publisher to the specified SNS topic.

func (DeregisterEventTopicInput) GoString added in v1.1.16 

func (s DeregisterEventTopicInput) GoString() string

GoString returns the string representation

func (DeregisterEventTopicInput) String added in v1.1.16 

func (s DeregisterEventTopicInput) String() string

String returns the string representation

func (*DeregisterEventTopicInput) Validate added in v1.1.22 

func (s *DeregisterEventTopicInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterEventTopicOutput added in v1.1.16 

type DeregisterEventTopicOutput struct {
	// contains filtered or unexported fields
}

The result of a DeregisterEventTopic request.

func (DeregisterEventTopicOutput) GoString added in v1.1.16 

func (s DeregisterEventTopicOutput) GoString() string

GoString returns the string representation

func (DeregisterEventTopicOutput) String added in v1.1.16 

func (s DeregisterEventTopicOutput) String() string

String returns the string representation

type DescribeConditionalForwardersInput added in v1.1.19 

type DescribeConditionalForwardersInput struct {

	// The directory ID for which to get the list of associated conditional forwarders.
	DirectoryId *string `type:"string" required:"true"`

	// The fully qualified domain names (FQDN) of the remote domains for which to
	// get the list of associated conditional forwarders. If this member is null,
	// all conditional forwarders are returned.
	RemoteDomainNames []*string `type:"list"`
	// contains filtered or unexported fields
}

Describes a conditional forwarder.

func (DescribeConditionalForwardersInput) GoString added in v1.1.19 

func (s DescribeConditionalForwardersInput) GoString() string

GoString returns the string representation

func (DescribeConditionalForwardersInput) String added in v1.1.19 

func (s DescribeConditionalForwardersInput) String() string

String returns the string representation

func (*DescribeConditionalForwardersInput) Validate added in v1.1.22 

func (s *DescribeConditionalForwardersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeConditionalForwardersOutput added in v1.1.19 

type DescribeConditionalForwardersOutput struct {

	// The list of conditional forwarders that have been created.
	ConditionalForwarders []*ConditionalForwarder `type:"list"`
	// contains filtered or unexported fields
}

The result of a DescribeConditionalForwarder request.

func (DescribeConditionalForwardersOutput) GoString added in v1.1.19 

func (s DescribeConditionalForwardersOutput) GoString() string

GoString returns the string representation

func (DescribeConditionalForwardersOutput) String added in v1.1.19 

func (s DescribeConditionalForwardersOutput) String() string

String returns the string representation

type DescribeDirectoriesInput 

type DescribeDirectoriesInput struct {

	// A list of identifiers of the directories for which to obtain the information.
	// If this member is null, all directories that belong to the current account
	// are returned.
	//
	// An empty list results in an InvalidParameterException being thrown.
	DirectoryIds []*string `type:"list"`

	// The maximum number of items to return. If this value is zero, the maximum
	// number of items is specified by the limitations of the operation.
	Limit *int64 `type:"integer"`

	// The DescribeDirectoriesResult.NextToken value from a previous call to DescribeDirectories.
	// Pass null if this is the first call.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the inputs for the DescribeDirectories operation.

func (DescribeDirectoriesInput) GoString added in v0.6.6 

func (s DescribeDirectoriesInput) GoString() string

GoString returns the string representation

func (DescribeDirectoriesInput) String added in v0.6.6 

func (s DescribeDirectoriesInput) String() string

String returns the string representation

type DescribeDirectoriesOutput 

type DescribeDirectoriesOutput struct {

	// The list of DirectoryDescription objects that were retrieved.
	//
	// It is possible that this list contains less than the number of items specified
	// in the Limit member of the request. This occurs if there are less than the
	// requested number of items left to retrieve, or if the limitations of the
	// operation have been exceeded.
	DirectoryDescriptions []*DirectoryDescription `type:"list"`

	// If not null, more results are available. Pass this value for the NextToken
	// parameter in a subsequent call to DescribeDirectories to retrieve the next
	// set of items.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the results of the DescribeDirectories operation.

func (DescribeDirectoriesOutput) GoString added in v0.6.6 

func (s DescribeDirectoriesOutput) GoString() string

GoString returns the string representation

func (DescribeDirectoriesOutput) String added in v0.6.6 

func (s DescribeDirectoriesOutput) String() string

String returns the string representation

type DescribeEventTopicsInput added in v1.1.16 

type DescribeEventTopicsInput struct {

	// The Directory ID for which to get the list of associated SNS topics. If this
	// member is null, associations for all Directory IDs are returned.
	DirectoryId *string `type:"string"`

	// A list of SNS topic names for which to obtain the information. If this member
	// is null, all associations for the specified Directory ID are returned.
	//
	// An empty list results in an InvalidParameterException being thrown.
	TopicNames []*string `type:"list"`
	// contains filtered or unexported fields
}

Describes event topics.

func (DescribeEventTopicsInput) GoString added in v1.1.16 

func (s DescribeEventTopicsInput) GoString() string

GoString returns the string representation

func (DescribeEventTopicsInput) String added in v1.1.16 

func (s DescribeEventTopicsInput) String() string

String returns the string representation

type DescribeEventTopicsOutput added in v1.1.16 

type DescribeEventTopicsOutput struct {

	// A list of SNS topic names that receive status messages from the specified
	// Directory ID.
	EventTopics []*EventTopic `type:"list"`
	// contains filtered or unexported fields
}

The result of a DescribeEventTopic request.

func (DescribeEventTopicsOutput) GoString added in v1.1.16 

func (s DescribeEventTopicsOutput) GoString() string

GoString returns the string representation

func (DescribeEventTopicsOutput) String added in v1.1.16 

func (s DescribeEventTopicsOutput) String() string

String returns the string representation

type DescribeSnapshotsInput 

type DescribeSnapshotsInput struct {

	// The identifier of the directory for which to retrieve snapshot information.
	DirectoryId *string `type:"string"`

	// The maximum number of objects to return.
	Limit *int64 `type:"integer"`

	// The DescribeSnapshotsResult.NextToken value from a previous call to DescribeSnapshots.
	// Pass null if this is the first call.
	NextToken *string `type:"string"`

	// A list of identifiers of the snapshots to obtain the information for. If
	// this member is null or empty, all snapshots are returned using the Limit
	// and NextToken members.
	SnapshotIds []*string `type:"list"`
	// contains filtered or unexported fields
}

Contains the inputs for the DescribeSnapshots operation.

func (DescribeSnapshotsInput) GoString added in v0.6.6 

func (s DescribeSnapshotsInput) GoString() string

GoString returns the string representation

func (DescribeSnapshotsInput) String added in v0.6.6 

func (s DescribeSnapshotsInput) String() string

String returns the string representation

type DescribeSnapshotsOutput 

type DescribeSnapshotsOutput struct {

	// If not null, more results are available. Pass this value in the NextToken
	// member of a subsequent call to DescribeSnapshots.
	NextToken *string `type:"string"`

	// The list of Snapshot objects that were retrieved.
	//
	// It is possible that this list contains less than the number of items specified
	// in the Limit member of the request. This occurs if there are less than the
	// requested number of items left to retrieve, or if the limitations of the
	// operation have been exceeded.
	Snapshots []*Snapshot `type:"list"`
	// contains filtered or unexported fields
}

Contains the results of the DescribeSnapshots operation.

func (DescribeSnapshotsOutput) GoString added in v0.6.6 

func (s DescribeSnapshotsOutput) GoString() string

GoString returns the string representation

func (DescribeSnapshotsOutput) String added in v0.6.6 

func (s DescribeSnapshotsOutput) String() string

String returns the string representation

type DescribeTrustsInput added in v1.0.5 

type DescribeTrustsInput struct {

	// The Directory ID of the AWS directory that is a part of the requested trust
	// relationship.
	DirectoryId *string `type:"string"`

	// The maximum number of objects to return.
	Limit *int64 `type:"integer"`

	// The DescribeTrustsResult.NextToken value from a previous call to DescribeTrusts.
	// Pass null if this is the first call.
	NextToken *string `type:"string"`

	// A list of identifiers of the trust relationships for which to obtain the
	// information. If this member is null, all trust relationships that belong
	// to the current account are returned.
	//
	// An empty list results in an InvalidParameterException being thrown.
	TrustIds []*string `type:"list"`
	// contains filtered or unexported fields
}

Describes the trust relationships for a particular Microsoft AD in the AWS cloud. If no input parameters are are provided, such as directory ID or trust ID, this request describes all the trust relationships.

func (DescribeTrustsInput) GoString added in v1.0.5 

func (s DescribeTrustsInput) GoString() string

GoString returns the string representation

func (DescribeTrustsInput) String added in v1.0.5 

func (s DescribeTrustsInput) String() string

String returns the string representation

type DescribeTrustsOutput added in v1.0.5 

type DescribeTrustsOutput struct {

	// If not null, more results are available. Pass this value for the NextToken
	// parameter in a subsequent call to DescribeTrusts to retrieve the next set
	// of items.
	NextToken *string `type:"string"`

	// The list of Trust objects that were retrieved.
	//
	// It is possible that this list contains less than the number of items specified
	// in the Limit member of the request. This occurs if there are less than the
	// requested number of items left to retrieve, or if the limitations of the
	// operation have been exceeded.
	Trusts []*Trust `type:"list"`
	// contains filtered or unexported fields
}

The result of a DescribeTrust request.

func (DescribeTrustsOutput) GoString added in v1.0.5 

func (s DescribeTrustsOutput) GoString() string

GoString returns the string representation

func (DescribeTrustsOutput) String added in v1.0.5 

func (s DescribeTrustsOutput) String() string

String returns the string representation

type DirectoryConnectSettings 

type DirectoryConnectSettings struct {

	// A list of one or more IP addresses of DNS servers or domain controllers in
	// the on-premises directory.
	CustomerDnsIps []*string `type:"list" required:"true"`

	// The username of an account in the on-premises directory that is used to connect
	// to the directory. This account must have the following privileges:
	//
	//   Read users and groups
	//
	//   Create computer objects
	//
	//   Join computers to the domain
	CustomerUserName *string `min:"1" type:"string" required:"true"`

	// A list of subnet identifiers in the VPC in which the AD Connector is created.
	SubnetIds []*string `type:"list" required:"true"`

	// The identifier of the VPC in which the AD Connector is created.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains information for the ConnectDirectory operation when an AD Connector directory is being created.

func (DirectoryConnectSettings) GoString added in v0.6.6 

func (s DirectoryConnectSettings) GoString() string

GoString returns the string representation

func (DirectoryConnectSettings) String added in v0.6.6 

func (s DirectoryConnectSettings) String() string

String returns the string representation

func (*DirectoryConnectSettings) Validate added in v1.1.22 

func (s *DirectoryConnectSettings) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DirectoryConnectSettingsDescription 

type DirectoryConnectSettingsDescription struct {

	// A list of the Availability Zones that the directory is in.
	AvailabilityZones []*string `type:"list"`

	// The IP addresses of the AD Connector servers.
	ConnectIps []*string `type:"list"`

	// The username of the service account in the on-premises directory.
	CustomerUserName *string `min:"1" type:"string"`

	// The security group identifier for the AD Connector directory.
	SecurityGroupId *string `type:"string"`

	// A list of subnet identifiers in the VPC that the AD connector is in.
	SubnetIds []*string `type:"list"`

	// The identifier of the VPC that the AD Connector is in.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about an AD Connector directory.

func (DirectoryConnectSettingsDescription) GoString added in v0.6.6 

func (s DirectoryConnectSettingsDescription) GoString() string

GoString returns the string representation

func (DirectoryConnectSettingsDescription) String added in v0.6.6 

func (s DirectoryConnectSettingsDescription) String() string

String returns the string representation

type DirectoryDescription 

type DirectoryDescription struct {

	// The access URL for the directory, such as http://<alias>.awsapps.com. If
	// no alias has been created for the directory, <alias> is the directory identifier,
	// such as d-XXXXXXXXXX.
	AccessUrl *string `min:"1" type:"string"`

	// The alias for the directory. If no alias has been created for the directory,
	// the alias is the directory identifier, such as d-XXXXXXXXXX.
	Alias *string `min:"1" type:"string"`

	// A DirectoryConnectSettingsDescription object that contains additional information
	// about an AD Connector directory. This member is only present if the directory
	// is an AD Connector directory.
	ConnectSettings *DirectoryConnectSettingsDescription `type:"structure"`

	// The textual description for the directory.
	Description *string `type:"string"`

	// The directory identifier.
	DirectoryId *string `type:"string"`

	// The IP addresses of the DNS servers for the directory. For a Simple AD or
	// Microsoft AD directory, these are the IP addresses of the Simple AD or Microsoft
	// AD directory servers. For an AD Connector directory, these are the IP addresses
	// of the DNS servers or domain controllers in the on-premises directory to
	// which the AD Connector is connected.
	DnsIpAddrs []*string `type:"list"`

	// Specifies when the directory was created.
	LaunchTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The fully-qualified name of the directory.
	Name *string `type:"string"`

	// A RadiusSettings object that contains information about the RADIUS server
	// configured for this directory.
	RadiusSettings *RadiusSettings `type:"structure"`

	// The status of the RADIUS MFA server connection.
	RadiusStatus *string `type:"string" enum:"RadiusStatus"`

	// The short name of the directory.
	ShortName *string `type:"string"`

	// The directory size.
	Size *string `type:"string" enum:"DirectorySize"`

	// Indicates if single-sign on is enabled for the directory. For more information,
	// see EnableSso and DisableSso.
	SsoEnabled *bool `type:"boolean"`

	// The current stage of the directory.
	Stage *string `type:"string" enum:"DirectoryStage"`

	// The date and time that the stage was last updated.
	StageLastUpdatedDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// Additional information about the directory stage.
	StageReason *string `type:"string"`

	// The directory size.
	Type *string `type:"string" enum:"DirectoryType"`

	// A DirectoryVpcSettingsDescription object that contains additional information
	// about a directory. This member is only present if the directory is a Simple
	// AD or Managed AD directory.
	VpcSettings *DirectoryVpcSettingsDescription `type:"structure"`
	// contains filtered or unexported fields
}

Contains information about an AWS Directory Service directory.

func (DirectoryDescription) GoString added in v0.6.6 

func (s DirectoryDescription) GoString() string

GoString returns the string representation

func (DirectoryDescription) String added in v0.6.6 

func (s DirectoryDescription) String() string

String returns the string representation

type DirectoryLimits 

type DirectoryLimits struct {

	// The current number of cloud directories in the region.
	CloudOnlyDirectoriesCurrentCount *int64 `type:"integer"`

	// The maximum number of cloud directories allowed in the region.
	CloudOnlyDirectoriesLimit *int64 `type:"integer"`

	// Indicates if the cloud directory limit has been reached.
	CloudOnlyDirectoriesLimitReached *bool `type:"boolean"`

	// The current number of Microsoft AD directories in the region.
	CloudOnlyMicrosoftADCurrentCount *int64 `type:"integer"`

	// The maximum number of Microsoft AD directories allowed in the region.
	CloudOnlyMicrosoftADLimit *int64 `type:"integer"`

	// Indicates if the Microsoft AD directory limit has been reached.
	CloudOnlyMicrosoftADLimitReached *bool `type:"boolean"`

	// The current number of connected directories in the region.
	ConnectedDirectoriesCurrentCount *int64 `type:"integer"`

	// The maximum number of connected directories allowed in the region.
	ConnectedDirectoriesLimit *int64 `type:"integer"`

	// Indicates if the connected directory limit has been reached.
	ConnectedDirectoriesLimitReached *bool `type:"boolean"`
	// contains filtered or unexported fields
}

Contains directory limit information for a region.

func (DirectoryLimits) GoString added in v0.6.6 

func (s DirectoryLimits) GoString() string

GoString returns the string representation

func (DirectoryLimits) String added in v0.6.6 

func (s DirectoryLimits) String() string

String returns the string representation

type DirectoryService 

type DirectoryService struct {
	*client.Client
}

This is the AWS Directory Service API Reference. This guide provides detailed information about AWS Directory Service operations, data types, parameters, and errors. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New 

func New(p client.ConfigProvider, cfgs ...*aws.Config) *DirectoryService

New creates a new instance of the DirectoryService client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example: 

// Create a DirectoryService client from just a session.
svc := directoryservice.New(mySession)

// Create a DirectoryService client with additional configuration
svc := directoryservice.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*DirectoryService) AddTagsToResource added in v1.2.5 

func (c *DirectoryService) AddTagsToResource(input *AddTagsToResourceInput) (*AddTagsToResourceOutput, error)

Adds or overwrites one or more tags for the specified Amazon Directory Services directory. Each directory can have a maximum of 10 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.AddTagsToResourceInput{
		ResourceId: aws.String("ResourceId"), // Required
		Tags: []*directoryservice.Tag{ // Required
			{ // Required
				Key:   aws.String("TagKey"),   // Required
				Value: aws.String("TagValue"), // Required
			},
			// More values...
		},
	}
	resp, err := svc.AddTagsToResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) AddTagsToResourceRequest added in v1.2.5 

func (c *DirectoryService) AddTagsToResourceRequest(input *AddTagsToResourceInput) (req *request.Request, output *AddTagsToResourceOutput)

AddTagsToResourceRequest generates a "aws/request.Request" representing the client's request for the AddTagsToResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddTagsToResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AddTagsToResourceRequest method.
req, resp := client.AddTagsToResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) ConnectDirectory 

func (c *DirectoryService) ConnectDirectory(input *ConnectDirectoryInput) (*ConnectDirectoryOutput, error)

Creates an AD Connector to connect to an on-premises directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.ConnectDirectoryInput{
		ConnectSettings: &directoryservice.DirectoryConnectSettings{ // Required
			CustomerDnsIps: []*string{ // Required
				aws.String("IpAddr"), // Required
				// More values...
			},
			CustomerUserName: aws.String("UserName"), // Required
			SubnetIds: []*string{ // Required
				aws.String("SubnetId"), // Required
				// More values...
			},
			VpcId: aws.String("VpcId"), // Required
		},
		Name:        aws.String("DirectoryName"),   // Required
		Password:    aws.String("ConnectPassword"), // Required
		Size:        aws.String("DirectorySize"),   // Required
		Description: aws.String("Description"),
		ShortName:   aws.String("DirectoryShortName"),
	}
	resp, err := svc.ConnectDirectory(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) ConnectDirectoryRequest 

func (c *DirectoryService) ConnectDirectoryRequest(input *ConnectDirectoryInput) (req *request.Request, output *ConnectDirectoryOutput)

ConnectDirectoryRequest generates a "aws/request.Request" representing the client's request for the ConnectDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ConnectDirectory method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ConnectDirectoryRequest method.
req, resp := client.ConnectDirectoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateAlias 

func (c *DirectoryService) CreateAlias(input *CreateAliasInput) (*CreateAliasOutput, error)

Creates an alias for a directory and assigns the alias to the directory. The alias is used to construct the access URL for the directory, such as http://<alias>.awsapps.com. 

After an alias has been created, it cannot be deleted or reused, so this

operation should only be used when absolutely necessary.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateAliasInput{
		Alias:       aws.String("AliasName"),   // Required
		DirectoryId: aws.String("DirectoryId"), // Required
	}
	resp, err := svc.CreateAlias(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateAliasRequest 

func (c *DirectoryService) CreateAliasRequest(input *CreateAliasInput) (req *request.Request, output *CreateAliasOutput)

CreateAliasRequest generates a "aws/request.Request" representing the client's request for the CreateAlias operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateAlias method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateAliasRequest method.
req, resp := client.CreateAliasRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateComputer 

func (c *DirectoryService) CreateComputer(input *CreateComputerInput) (*CreateComputerOutput, error)

Creates a computer account in the specified directory, and joins the computer to the directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateComputerInput{
		ComputerName: aws.String("ComputerName"),     // Required
		DirectoryId:  aws.String("DirectoryId"),      // Required
		Password:     aws.String("ComputerPassword"), // Required
		ComputerAttributes: []*directoryservice.Attribute{
			{ // Required
				Name:  aws.String("AttributeName"),
				Value: aws.String("AttributeValue"),
			},
			// More values...
		},
		OrganizationalUnitDistinguishedName: aws.String("OrganizationalUnitDN"),
	}
	resp, err := svc.CreateComputer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateComputerRequest 

func (c *DirectoryService) CreateComputerRequest(input *CreateComputerInput) (req *request.Request, output *CreateComputerOutput)

CreateComputerRequest generates a "aws/request.Request" representing the client's request for the CreateComputer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateComputer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateComputerRequest method.
req, resp := client.CreateComputerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateConditionalForwarder added in v1.1.19 

func (c *DirectoryService) CreateConditionalForwarder(input *CreateConditionalForwarderInput) (*CreateConditionalForwarderOutput, error)

Creates a conditional forwarder associated with your AWS directory. Conditional forwarders are required in order to set up a trust relationship with another domain. The conditional forwarder points to the trusted domain.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateConditionalForwarderInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		DnsIpAddrs: []*string{ // Required
			aws.String("IpAddr"), // Required
			// More values...
		},
		RemoteDomainName: aws.String("RemoteDomainName"), // Required
	}
	resp, err := svc.CreateConditionalForwarder(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateConditionalForwarderRequest added in v1.1.19 

func (c *DirectoryService) CreateConditionalForwarderRequest(input *CreateConditionalForwarderInput) (req *request.Request, output *CreateConditionalForwarderOutput)

CreateConditionalForwarderRequest generates a "aws/request.Request" representing the client's request for the CreateConditionalForwarder operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateConditionalForwarder method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateConditionalForwarderRequest method.
req, resp := client.CreateConditionalForwarderRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateDirectory 

func (c *DirectoryService) CreateDirectory(input *CreateDirectoryInput) (*CreateDirectoryOutput, error)

Creates a Simple AD directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateDirectoryInput{
		Name:        aws.String("DirectoryName"), // Required
		Password:    aws.String("Password"),      // Required
		Size:        aws.String("DirectorySize"), // Required
		Description: aws.String("Description"),
		ShortName:   aws.String("DirectoryShortName"),
		VpcSettings: &directoryservice.DirectoryVpcSettings{
			SubnetIds: []*string{ // Required
				aws.String("SubnetId"), // Required
				// More values...
			},
			VpcId: aws.String("VpcId"), // Required
		},
	}
	resp, err := svc.CreateDirectory(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateDirectoryRequest 

func (c *DirectoryService) CreateDirectoryRequest(input *CreateDirectoryInput) (req *request.Request, output *CreateDirectoryOutput)

CreateDirectoryRequest generates a "aws/request.Request" representing the client's request for the CreateDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateDirectory method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateDirectoryRequest method.
req, resp := client.CreateDirectoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateMicrosoftAD added in v1.0.5 

func (c *DirectoryService) CreateMicrosoftAD(input *CreateMicrosoftADInput) (*CreateMicrosoftADOutput, error)

Creates a Microsoft AD in the AWS cloud.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateMicrosoftADInput{
		Name:     aws.String("DirectoryName"), // Required
		Password: aws.String("Password"),      // Required
		VpcSettings: &directoryservice.DirectoryVpcSettings{ // Required
			SubnetIds: []*string{ // Required
				aws.String("SubnetId"), // Required
				// More values...
			},
			VpcId: aws.String("VpcId"), // Required
		},
		Description: aws.String("Description"),
		ShortName:   aws.String("DirectoryShortName"),
	}
	resp, err := svc.CreateMicrosoftAD(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateMicrosoftADRequest added in v1.0.5 

func (c *DirectoryService) CreateMicrosoftADRequest(input *CreateMicrosoftADInput) (req *request.Request, output *CreateMicrosoftADOutput)

CreateMicrosoftADRequest generates a "aws/request.Request" representing the client's request for the CreateMicrosoftAD operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateMicrosoftAD method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateMicrosoftADRequest method.
req, resp := client.CreateMicrosoftADRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateSnapshot 

func (c *DirectoryService) CreateSnapshot(input *CreateSnapshotInput) (*CreateSnapshotOutput, error)

Creates a snapshot of a Simple AD or Microsoft AD directory in the AWS cloud. 

You cannot take snapshots of AD Connector directories.
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateSnapshotInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		Name:        aws.String("SnapshotName"),
	}
	resp, err := svc.CreateSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateSnapshotRequest 

func (c *DirectoryService) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Request, output *CreateSnapshotOutput)

CreateSnapshotRequest generates a "aws/request.Request" representing the client's request for the CreateSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateSnapshotRequest method.
req, resp := client.CreateSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) CreateTrust added in v1.0.5 

func (c *DirectoryService) CreateTrust(input *CreateTrustInput) (*CreateTrustOutput, error)

AWS Directory Service for Microsoft Active Directory allows you to configure trust relationships. For example, you can establish a trust between your Microsoft AD in the AWS cloud, and your existing on-premises Microsoft Active Directory. This would allow you to provide users and groups access to resources in either domain, with a single set of credentials.

This action initiates the creation of the AWS side of a trust relationship between a Microsoft AD in the AWS cloud and an external domain.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.CreateTrustInput{
		DirectoryId:      aws.String("DirectoryId"),      // Required
		RemoteDomainName: aws.String("RemoteDomainName"), // Required
		TrustDirection:   aws.String("TrustDirection"),   // Required
		TrustPassword:    aws.String("TrustPassword"),    // Required
		ConditionalForwarderIpAddrs: []*string{
			aws.String("IpAddr"), // Required
			// More values...
		},
		TrustType: aws.String("TrustType"),
	}
	resp, err := svc.CreateTrust(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) CreateTrustRequest added in v1.0.5 

func (c *DirectoryService) CreateTrustRequest(input *CreateTrustInput) (req *request.Request, output *CreateTrustOutput)

CreateTrustRequest generates a "aws/request.Request" representing the client's request for the CreateTrust operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrust method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTrustRequest method.
req, resp := client.CreateTrustRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DeleteConditionalForwarder added in v1.1.19 

func (c *DirectoryService) DeleteConditionalForwarder(input *DeleteConditionalForwarderInput) (*DeleteConditionalForwarderOutput, error)

Deletes a conditional forwarder that has been set up for your AWS directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DeleteConditionalForwarderInput{
		DirectoryId:      aws.String("DirectoryId"),      // Required
		RemoteDomainName: aws.String("RemoteDomainName"), // Required
	}
	resp, err := svc.DeleteConditionalForwarder(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DeleteConditionalForwarderRequest added in v1.1.19 

func (c *DirectoryService) DeleteConditionalForwarderRequest(input *DeleteConditionalForwarderInput) (req *request.Request, output *DeleteConditionalForwarderOutput)

DeleteConditionalForwarderRequest generates a "aws/request.Request" representing the client's request for the DeleteConditionalForwarder operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteConditionalForwarder method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteConditionalForwarderRequest method.
req, resp := client.DeleteConditionalForwarderRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DeleteDirectory 

func (c *DirectoryService) DeleteDirectory(input *DeleteDirectoryInput) (*DeleteDirectoryOutput, error)

Deletes an AWS Directory Service directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DeleteDirectoryInput{
		DirectoryId: aws.String("DirectoryId"), // Required
	}
	resp, err := svc.DeleteDirectory(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DeleteDirectoryRequest 

func (c *DirectoryService) DeleteDirectoryRequest(input *DeleteDirectoryInput) (req *request.Request, output *DeleteDirectoryOutput)

DeleteDirectoryRequest generates a "aws/request.Request" representing the client's request for the DeleteDirectory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteDirectory method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteDirectoryRequest method.
req, resp := client.DeleteDirectoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DeleteSnapshot 

func (c *DirectoryService) DeleteSnapshot(input *DeleteSnapshotInput) (*DeleteSnapshotOutput, error)

Deletes a directory snapshot.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DeleteSnapshotInput{
		SnapshotId: aws.String("SnapshotId"), // Required
	}
	resp, err := svc.DeleteSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DeleteSnapshotRequest 

func (c *DirectoryService) DeleteSnapshotRequest(input *DeleteSnapshotInput) (req *request.Request, output *DeleteSnapshotOutput)

DeleteSnapshotRequest generates a "aws/request.Request" representing the client's request for the DeleteSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteSnapshotRequest method.
req, resp := client.DeleteSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DeleteTrust added in v1.0.5 

func (c *DirectoryService) DeleteTrust(input *DeleteTrustInput) (*DeleteTrustOutput, error)

Deletes an existing trust relationship between your Microsoft AD in the AWS cloud and an external domain.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DeleteTrustInput{
		TrustId:                              aws.String("TrustId"), // Required
		DeleteAssociatedConditionalForwarder: aws.Bool(true),
	}
	resp, err := svc.DeleteTrust(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DeleteTrustRequest added in v1.0.5 

func (c *DirectoryService) DeleteTrustRequest(input *DeleteTrustInput) (req *request.Request, output *DeleteTrustOutput)

DeleteTrustRequest generates a "aws/request.Request" representing the client's request for the DeleteTrust operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTrust method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteTrustRequest method.
req, resp := client.DeleteTrustRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DeregisterEventTopic added in v1.1.16 

func (c *DirectoryService) DeregisterEventTopic(input *DeregisterEventTopicInput) (*DeregisterEventTopicOutput, error)

Removes the specified directory as a publisher to the specified SNS topic.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DeregisterEventTopicInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		TopicName:   aws.String("TopicName"),   // Required
	}
	resp, err := svc.DeregisterEventTopic(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DeregisterEventTopicRequest added in v1.1.16 

func (c *DirectoryService) DeregisterEventTopicRequest(input *DeregisterEventTopicInput) (req *request.Request, output *DeregisterEventTopicOutput)

DeregisterEventTopicRequest generates a "aws/request.Request" representing the client's request for the DeregisterEventTopic operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeregisterEventTopic method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeregisterEventTopicRequest method.
req, resp := client.DeregisterEventTopicRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DescribeConditionalForwarders added in v1.1.19 

func (c *DirectoryService) DescribeConditionalForwarders(input *DescribeConditionalForwardersInput) (*DescribeConditionalForwardersOutput, error)

Obtains information about the conditional forwarders for this account.

If no input parameters are provided for RemoteDomainNames, this request describes all conditional forwarders for the specified directory ID.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DescribeConditionalForwardersInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		RemoteDomainNames: []*string{
			aws.String("RemoteDomainName"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeConditionalForwarders(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DescribeConditionalForwardersRequest added in v1.1.19 

func (c *DirectoryService) DescribeConditionalForwardersRequest(input *DescribeConditionalForwardersInput) (req *request.Request, output *DescribeConditionalForwardersOutput)

DescribeConditionalForwardersRequest generates a "aws/request.Request" representing the client's request for the DescribeConditionalForwarders operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConditionalForwarders method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeConditionalForwardersRequest method.
req, resp := client.DescribeConditionalForwardersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DescribeDirectories 

func (c *DirectoryService) DescribeDirectories(input *DescribeDirectoriesInput) (*DescribeDirectoriesOutput, error)

Obtains information about the directories that belong to this account.

You can retrieve information about specific directories by passing the directory identifiers in the DirectoryIds parameter. Otherwise, all directories that belong to the current account are returned.

This operation supports pagination with the use of the NextToken request and response parameters. If more results are available, the DescribeDirectoriesResult.NextToken member contains a token that you pass in the next call to DescribeDirectories to retrieve the next set of items.

You can also specify a maximum number of return results with the Limit parameter.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DescribeDirectoriesInput{
		DirectoryIds: []*string{
			aws.String("DirectoryId"), // Required
			// More values...
		},
		Limit:     aws.Int64(1),
		NextToken: aws.String("NextToken"),
	}
	resp, err := svc.DescribeDirectories(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DescribeDirectoriesRequest 

func (c *DirectoryService) DescribeDirectoriesRequest(input *DescribeDirectoriesInput) (req *request.Request, output *DescribeDirectoriesOutput)

DescribeDirectoriesRequest generates a "aws/request.Request" representing the client's request for the DescribeDirectories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeDirectories method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeDirectoriesRequest method.
req, resp := client.DescribeDirectoriesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DescribeEventTopics added in v1.1.16 

func (c *DirectoryService) DescribeEventTopics(input *DescribeEventTopicsInput) (*DescribeEventTopicsOutput, error)

Obtains information about which SNS topics receive status messages from the specified directory.

If no input parameters are provided, such as DirectoryId or TopicName, this request describes all of the associations in the account.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DescribeEventTopicsInput{
		DirectoryId: aws.String("DirectoryId"),
		TopicNames: []*string{
			aws.String("TopicName"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeEventTopics(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DescribeEventTopicsRequest added in v1.1.16 

func (c *DirectoryService) DescribeEventTopicsRequest(input *DescribeEventTopicsInput) (req *request.Request, output *DescribeEventTopicsOutput)

DescribeEventTopicsRequest generates a "aws/request.Request" representing the client's request for the DescribeEventTopics operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeEventTopics method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeEventTopicsRequest method.
req, resp := client.DescribeEventTopicsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DescribeSnapshots 

func (c *DirectoryService) DescribeSnapshots(input *DescribeSnapshotsInput) (*DescribeSnapshotsOutput, error)

Obtains information about the directory snapshots that belong to this account.

This operation supports pagination with the use of the NextToken request and response parameters. If more results are available, the DescribeSnapshots.NextToken member contains a token that you pass in the next call to DescribeSnapshots to retrieve the next set of items.

You can also specify a maximum number of return results with the Limit parameter.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DescribeSnapshotsInput{
		DirectoryId: aws.String("DirectoryId"),
		Limit:       aws.Int64(1),
		NextToken:   aws.String("NextToken"),
		SnapshotIds: []*string{
			aws.String("SnapshotId"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSnapshots(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DescribeSnapshotsRequest 

func (c *DirectoryService) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *request.Request, output *DescribeSnapshotsOutput)

DescribeSnapshotsRequest generates a "aws/request.Request" representing the client's request for the DescribeSnapshots operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSnapshots method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSnapshotsRequest method.
req, resp := client.DescribeSnapshotsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DescribeTrusts added in v1.0.5 

func (c *DirectoryService) DescribeTrusts(input *DescribeTrustsInput) (*DescribeTrustsOutput, error)

Obtains information about the trust relationships for this account.

If no input parameters are provided, such as DirectoryId or TrustIds, this request describes all the trust relationships belonging to the account.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DescribeTrustsInput{
		DirectoryId: aws.String("DirectoryId"),
		Limit:       aws.Int64(1),
		NextToken:   aws.String("NextToken"),
		TrustIds: []*string{
			aws.String("TrustId"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTrusts(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DescribeTrustsRequest added in v1.0.5 

func (c *DirectoryService) DescribeTrustsRequest(input *DescribeTrustsInput) (req *request.Request, output *DescribeTrustsOutput)

DescribeTrustsRequest generates a "aws/request.Request" representing the client's request for the DescribeTrusts operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrusts method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTrustsRequest method.
req, resp := client.DescribeTrustsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DisableRadius 

func (c *DirectoryService) DisableRadius(input *DisableRadiusInput) (*DisableRadiusOutput, error)

Disables multi-factor authentication (MFA) with the Remote Authentication Dial In User Service (RADIUS) server for an AD Connector directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DisableRadiusInput{
		DirectoryId: aws.String("DirectoryId"), // Required
	}
	resp, err := svc.DisableRadius(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DisableRadiusRequest 

func (c *DirectoryService) DisableRadiusRequest(input *DisableRadiusInput) (req *request.Request, output *DisableRadiusOutput)

DisableRadiusRequest generates a "aws/request.Request" representing the client's request for the DisableRadius operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableRadius method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisableRadiusRequest method.
req, resp := client.DisableRadiusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) DisableSso added in v0.9.5 

func (c *DirectoryService) DisableSso(input *DisableSsoInput) (*DisableSsoOutput, error)

Disables single-sign on for a directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.DisableSsoInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		Password:    aws.String("ConnectPassword"),
		UserName:    aws.String("UserName"),
	}
	resp, err := svc.DisableSso(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) DisableSsoRequest added in v0.9.5 

func (c *DirectoryService) DisableSsoRequest(input *DisableSsoInput) (req *request.Request, output *DisableSsoOutput)

DisableSsoRequest generates a "aws/request.Request" representing the client's request for the DisableSso operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableSso method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisableSsoRequest method.
req, resp := client.DisableSsoRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) EnableRadius 

func (c *DirectoryService) EnableRadius(input *EnableRadiusInput) (*EnableRadiusOutput, error)

Enables multi-factor authentication (MFA) with the Remote Authentication Dial In User Service (RADIUS) server for an AD Connector directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.EnableRadiusInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		RadiusSettings: &directoryservice.RadiusSettings{ // Required
			AuthenticationProtocol: aws.String("RadiusAuthenticationProtocol"),
			DisplayLabel:           aws.String("RadiusDisplayLabel"),
			RadiusPort:             aws.Int64(1),
			RadiusRetries:          aws.Int64(1),
			RadiusServers: []*string{
				aws.String("Server"), // Required
				// More values...
			},
			RadiusTimeout:   aws.Int64(1),
			SharedSecret:    aws.String("RadiusSharedSecret"),
			UseSameUsername: aws.Bool(true),
		},
	}
	resp, err := svc.EnableRadius(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) EnableRadiusRequest 

func (c *DirectoryService) EnableRadiusRequest(input *EnableRadiusInput) (req *request.Request, output *EnableRadiusOutput)

EnableRadiusRequest generates a "aws/request.Request" representing the client's request for the EnableRadius operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableRadius method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableRadiusRequest method.
req, resp := client.EnableRadiusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) EnableSso added in v0.9.5 

func (c *DirectoryService) EnableSso(input *EnableSsoInput) (*EnableSsoOutput, error)

Enables single-sign on for a directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.EnableSsoInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		Password:    aws.String("ConnectPassword"),
		UserName:    aws.String("UserName"),
	}
	resp, err := svc.EnableSso(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) EnableSsoRequest added in v0.9.5 

func (c *DirectoryService) EnableSsoRequest(input *EnableSsoInput) (req *request.Request, output *EnableSsoOutput)

EnableSsoRequest generates a "aws/request.Request" representing the client's request for the EnableSso operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableSso method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableSsoRequest method.
req, resp := client.EnableSsoRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) GetDirectoryLimits 

func (c *DirectoryService) GetDirectoryLimits(input *GetDirectoryLimitsInput) (*GetDirectoryLimitsOutput, error)

Obtains directory limit information for the current region.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	var params *directoryservice.GetDirectoryLimitsInput
	resp, err := svc.GetDirectoryLimits(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) GetDirectoryLimitsRequest 

func (c *DirectoryService) GetDirectoryLimitsRequest(input *GetDirectoryLimitsInput) (req *request.Request, output *GetDirectoryLimitsOutput)

GetDirectoryLimitsRequest generates a "aws/request.Request" representing the client's request for the GetDirectoryLimits operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDirectoryLimits method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetDirectoryLimitsRequest method.
req, resp := client.GetDirectoryLimitsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) GetSnapshotLimits 

func (c *DirectoryService) GetSnapshotLimits(input *GetSnapshotLimitsInput) (*GetSnapshotLimitsOutput, error)

Obtains the manual snapshot limits for a directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.GetSnapshotLimitsInput{
		DirectoryId: aws.String("DirectoryId"), // Required
	}
	resp, err := svc.GetSnapshotLimits(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) GetSnapshotLimitsRequest 

func (c *DirectoryService) GetSnapshotLimitsRequest(input *GetSnapshotLimitsInput) (req *request.Request, output *GetSnapshotLimitsOutput)

GetSnapshotLimitsRequest generates a "aws/request.Request" representing the client's request for the GetSnapshotLimits operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetSnapshotLimits method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetSnapshotLimitsRequest method.
req, resp := client.GetSnapshotLimitsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) ListTagsForResource added in v1.2.5 

func (c *DirectoryService) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)

Lists all tags on an Amazon Directory Services directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.ListTagsForResourceInput{
		ResourceId: aws.String("ResourceId"), // Required
		Limit:      aws.Int64(1),
		NextToken:  aws.String("NextToken"),
	}
	resp, err := svc.ListTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) ListTagsForResourceRequest added in v1.2.5 

func (c *DirectoryService) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTagsForResourceRequest method.
req, resp := client.ListTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) RegisterEventTopic added in v1.1.16 

func (c *DirectoryService) RegisterEventTopic(input *RegisterEventTopicInput) (*RegisterEventTopicOutput, error)

Associates a directory with an SNS topic. This establishes the directory as a publisher to the specified SNS topic. You can then receive email or text (SMS) messages when the status of your directory changes. You get notified if your directory goes from an Active status to an Impaired or Inoperable status. You also receive a notification when the directory returns to an Active status.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.RegisterEventTopicInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		TopicName:   aws.String("TopicName"),   // Required
	}
	resp, err := svc.RegisterEventTopic(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) RegisterEventTopicRequest added in v1.1.16 

func (c *DirectoryService) RegisterEventTopicRequest(input *RegisterEventTopicInput) (req *request.Request, output *RegisterEventTopicOutput)

RegisterEventTopicRequest generates a "aws/request.Request" representing the client's request for the RegisterEventTopic operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterEventTopic method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RegisterEventTopicRequest method.
req, resp := client.RegisterEventTopicRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) RemoveTagsFromResource added in v1.2.5 

func (c *DirectoryService) RemoveTagsFromResource(input *RemoveTagsFromResourceInput) (*RemoveTagsFromResourceOutput, error)

Removes tags from an Amazon Directory Services directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.RemoveTagsFromResourceInput{
		ResourceId: aws.String("ResourceId"), // Required
		TagKeys: []*string{ // Required
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.RemoveTagsFromResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) RemoveTagsFromResourceRequest added in v1.2.5 

func (c *DirectoryService) RemoveTagsFromResourceRequest(input *RemoveTagsFromResourceInput) (req *request.Request, output *RemoveTagsFromResourceOutput)

RemoveTagsFromResourceRequest generates a "aws/request.Request" representing the client's request for the RemoveTagsFromResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RemoveTagsFromResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RemoveTagsFromResourceRequest method.
req, resp := client.RemoveTagsFromResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) RestoreFromSnapshot 

func (c *DirectoryService) RestoreFromSnapshot(input *RestoreFromSnapshotInput) (*RestoreFromSnapshotOutput, error)

Restores a directory using an existing directory snapshot.

When you restore a directory from a snapshot, any changes made to the directory after the snapshot date are overwritten.

This action returns as soon as the restore operation is initiated. You can monitor the progress of the restore operation by calling the DescribeDirectories operation with the directory identifier. When the DirectoryDescription.Stage value changes to Active, the restore operation is complete.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.RestoreFromSnapshotInput{
		SnapshotId: aws.String("SnapshotId"), // Required
	}
	resp, err := svc.RestoreFromSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) RestoreFromSnapshotRequest 

func (c *DirectoryService) RestoreFromSnapshotRequest(input *RestoreFromSnapshotInput) (req *request.Request, output *RestoreFromSnapshotOutput)

RestoreFromSnapshotRequest generates a "aws/request.Request" representing the client's request for the RestoreFromSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RestoreFromSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RestoreFromSnapshotRequest method.
req, resp := client.RestoreFromSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) UpdateConditionalForwarder added in v1.1.19 

func (c *DirectoryService) UpdateConditionalForwarder(input *UpdateConditionalForwarderInput) (*UpdateConditionalForwarderOutput, error)

Updates a conditional forwarder that has been set up for your AWS directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.UpdateConditionalForwarderInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		DnsIpAddrs: []*string{ // Required
			aws.String("IpAddr"), // Required
			// More values...
		},
		RemoteDomainName: aws.String("RemoteDomainName"), // Required
	}
	resp, err := svc.UpdateConditionalForwarder(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) UpdateConditionalForwarderRequest added in v1.1.19 

func (c *DirectoryService) UpdateConditionalForwarderRequest(input *UpdateConditionalForwarderInput) (req *request.Request, output *UpdateConditionalForwarderOutput)

UpdateConditionalForwarderRequest generates a "aws/request.Request" representing the client's request for the UpdateConditionalForwarder operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateConditionalForwarder method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateConditionalForwarderRequest method.
req, resp := client.UpdateConditionalForwarderRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) UpdateRadius 

func (c *DirectoryService) UpdateRadius(input *UpdateRadiusInput) (*UpdateRadiusOutput, error)

Updates the Remote Authentication Dial In User Service (RADIUS) server information for an AD Connector directory.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.UpdateRadiusInput{
		DirectoryId: aws.String("DirectoryId"), // Required
		RadiusSettings: &directoryservice.RadiusSettings{ // Required
			AuthenticationProtocol: aws.String("RadiusAuthenticationProtocol"),
			DisplayLabel:           aws.String("RadiusDisplayLabel"),
			RadiusPort:             aws.Int64(1),
			RadiusRetries:          aws.Int64(1),
			RadiusServers: []*string{
				aws.String("Server"), // Required
				// More values...
			},
			RadiusTimeout:   aws.Int64(1),
			SharedSecret:    aws.String("RadiusSharedSecret"),
			UseSameUsername: aws.Bool(true),
		},
	}
	resp, err := svc.UpdateRadius(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) UpdateRadiusRequest 

func (c *DirectoryService) UpdateRadiusRequest(input *UpdateRadiusInput) (req *request.Request, output *UpdateRadiusOutput)

UpdateRadiusRequest generates a "aws/request.Request" representing the client's request for the UpdateRadius operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateRadius method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateRadiusRequest method.
req, resp := client.UpdateRadiusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*DirectoryService) VerifyTrust added in v1.0.5 

func (c *DirectoryService) VerifyTrust(input *VerifyTrustInput) (*VerifyTrustOutput, error)

AWS Directory Service for Microsoft Active Directory allows you to configure and verify trust relationships.

This action verifies a trust relationship between your Microsoft AD in the AWS cloud and an external domain.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directoryservice"
)

func main() {
	svc := directoryservice.New(session.New())

	params := &directoryservice.VerifyTrustInput{
		TrustId: aws.String("TrustId"), // Required
	}
	resp, err := svc.VerifyTrust(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*DirectoryService) VerifyTrustRequest added in v1.0.5 

func (c *DirectoryService) VerifyTrustRequest(input *VerifyTrustInput) (req *request.Request, output *VerifyTrustOutput)

VerifyTrustRequest generates a "aws/request.Request" representing the client's request for the VerifyTrust operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the VerifyTrust method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the VerifyTrustRequest method.
req, resp := client.VerifyTrustRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

type DirectoryVpcSettings added in v0.9.5 

type DirectoryVpcSettings struct {

	// The identifiers of the subnets for the directory servers. The two subnets
	// must be in different Availability Zones. AWS Directory Service creates a
	// directory server and a DNS server in each of these subnets.
	SubnetIds []*string `type:"list" required:"true"`

	// The identifier of the VPC in which to create the directory.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains VPC information for the CreateDirectory or CreateMicrosoftAD operation.

func (DirectoryVpcSettings) GoString added in v0.9.5 

func (s DirectoryVpcSettings) GoString() string

GoString returns the string representation

func (DirectoryVpcSettings) String added in v0.9.5 

func (s DirectoryVpcSettings) String() string

String returns the string representation

func (*DirectoryVpcSettings) Validate added in v1.1.22 

func (s *DirectoryVpcSettings) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DirectoryVpcSettingsDescription added in v0.9.5 

type DirectoryVpcSettingsDescription struct {

	// The list of Availability Zones that the directory is in.
	AvailabilityZones []*string `type:"list"`

	// The security group identifier for the directory. If the directory was created
	// before 8/1/2014, this is the identifier of the directory members security
	// group that was created when the directory was created. If the directory was
	// created after this date, this value is null.
	SecurityGroupId *string `type:"string"`

	// The identifiers of the subnets for the directory servers.
	SubnetIds []*string `type:"list"`

	// The identifier of the VPC that the directory is in.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about the directory.

func (DirectoryVpcSettingsDescription) GoString added in v0.9.5 

func (s DirectoryVpcSettingsDescription) GoString() string

GoString returns the string representation

func (DirectoryVpcSettingsDescription) String added in v0.9.5 

func (s DirectoryVpcSettingsDescription) String() string

String returns the string representation

type DisableRadiusInput 

type DisableRadiusInput struct {

	// The identifier of the directory for which to disable MFA.
	DirectoryId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the DisableRadius operation.

func (DisableRadiusInput) GoString added in v0.6.6 

func (s DisableRadiusInput) GoString() string

GoString returns the string representation

func (DisableRadiusInput) String added in v0.6.6 

func (s DisableRadiusInput) String() string

String returns the string representation

func (*DisableRadiusInput) Validate added in v1.1.22 

func (s *DisableRadiusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisableRadiusOutput 

type DisableRadiusOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the DisableRadius operation.

func (DisableRadiusOutput) GoString added in v0.6.6 

func (s DisableRadiusOutput) GoString() string

GoString returns the string representation

func (DisableRadiusOutput) String added in v0.6.6 

func (s DisableRadiusOutput) String() string

String returns the string representation

type DisableSsoInput added in v0.9.5 

type DisableSsoInput struct {

	// The identifier of the directory for which to disable single-sign on.
	DirectoryId *string `type:"string" required:"true"`

	// The password of an alternate account to use to disable single-sign on. This
	// is only used for AD Connector directories. For more information, see the
	// UserName parameter.
	Password *string `min:"1" type:"string"`

	// The username of an alternate account to use to disable single-sign on. This
	// is only used for AD Connector directories. This account must have privileges
	// to remove a service principal name.
	//
	// If the AD Connector service account does not have privileges to remove a
	// service principal name, you can specify an alternate account with the UserName
	// and Password parameters. These credentials are only used to disable single
	// sign-on and are not stored by the service. The AD Connector service account
	// is not changed.
	UserName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

Contains the inputs for the DisableSso operation.

func (DisableSsoInput) GoString added in v0.9.5 

func (s DisableSsoInput) GoString() string

GoString returns the string representation

func (DisableSsoInput) String added in v0.9.5 

func (s DisableSsoInput) String() string

String returns the string representation

func (*DisableSsoInput) Validate added in v1.1.22 

func (s *DisableSsoInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisableSsoOutput added in v0.9.5 

type DisableSsoOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the DisableSso operation.

func (DisableSsoOutput) GoString added in v0.9.5 

func (s DisableSsoOutput) GoString() string

GoString returns the string representation

func (DisableSsoOutput) String added in v0.9.5 

func (s DisableSsoOutput) String() string

String returns the string representation

type EnableRadiusInput 

type EnableRadiusInput struct {

	// The identifier of the directory for which to enable MFA.
	DirectoryId *string `type:"string" required:"true"`

	// A RadiusSettings object that contains information about the RADIUS server.
	RadiusSettings *RadiusSettings `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the EnableRadius operation.

func (EnableRadiusInput) GoString added in v0.6.6 

func (s EnableRadiusInput) GoString() string

GoString returns the string representation

func (EnableRadiusInput) String added in v0.6.6 

func (s EnableRadiusInput) String() string

String returns the string representation

func (*EnableRadiusInput) Validate added in v1.1.22 

func (s *EnableRadiusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableRadiusOutput 

type EnableRadiusOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the EnableRadius operation.

func (EnableRadiusOutput) GoString added in v0.6.6 

func (s EnableRadiusOutput) GoString() string

GoString returns the string representation

func (EnableRadiusOutput) String added in v0.6.6 

func (s EnableRadiusOutput) String() string

String returns the string representation

type EnableSsoInput added in v0.9.5 

type EnableSsoInput struct {

	// The identifier of the directory for which to enable single-sign on.
	DirectoryId *string `type:"string" required:"true"`

	// The password of an alternate account to use to enable single-sign on. This
	// is only used for AD Connector directories. For more information, see the
	// UserName parameter.
	Password *string `min:"1" type:"string"`

	// The username of an alternate account to use to enable single-sign on. This
	// is only used for AD Connector directories. This account must have privileges
	// to add a service principal name.
	//
	// If the AD Connector service account does not have privileges to add a service
	// principal name, you can specify an alternate account with the UserName and
	// Password parameters. These credentials are only used to enable single sign-on
	// and are not stored by the service. The AD Connector service account is not
	// changed.
	UserName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

Contains the inputs for the EnableSso operation.

func (EnableSsoInput) GoString added in v0.9.5 

func (s EnableSsoInput) GoString() string

GoString returns the string representation

func (EnableSsoInput) String added in v0.9.5 

func (s EnableSsoInput) String() string

String returns the string representation

func (*EnableSsoInput) Validate added in v1.1.22 

func (s *EnableSsoInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableSsoOutput added in v0.9.5 

type EnableSsoOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the EnableSso operation.

func (EnableSsoOutput) GoString added in v0.9.5 

func (s EnableSsoOutput) GoString() string

GoString returns the string representation

func (EnableSsoOutput) String added in v0.9.5 

func (s EnableSsoOutput) String() string

String returns the string representation

type EventTopic added in v1.1.16 

type EventTopic struct {

	// The date and time of when you associated your directory with the SNS topic.
	CreatedDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Directory ID of an AWS Directory Service directory that will publish
	// status messages to an SNS topic.
	DirectoryId *string `type:"string"`

	// The topic registration status.
	Status *string `type:"string" enum:"TopicStatus"`

	// The SNS topic ARN (Amazon Resource Name).
	TopicArn *string `type:"string"`

	// The name of an AWS SNS topic the receives status messages from the directory.
	TopicName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

Information about SNS topic and AWS Directory Service directory associations.

func (EventTopic) GoString added in v1.1.16 

func (s EventTopic) GoString() string

GoString returns the string representation

func (EventTopic) String added in v1.1.16 

func (s EventTopic) String() string

String returns the string representation

type GetDirectoryLimitsInput 

type GetDirectoryLimitsInput struct {
	// contains filtered or unexported fields
}

Contains the inputs for the GetDirectoryLimits operation.

func (GetDirectoryLimitsInput) GoString added in v0.6.6 

func (s GetDirectoryLimitsInput) GoString() string

GoString returns the string representation

func (GetDirectoryLimitsInput) String added in v0.6.6 

func (s GetDirectoryLimitsInput) String() string

String returns the string representation

type GetDirectoryLimitsOutput 

type GetDirectoryLimitsOutput struct {

	// A DirectoryLimits object that contains the directory limits for the current
	// region.
	DirectoryLimits *DirectoryLimits `type:"structure"`
	// contains filtered or unexported fields
}

Contains the results of the GetDirectoryLimits operation.

func (GetDirectoryLimitsOutput) GoString added in v0.6.6 

func (s GetDirectoryLimitsOutput) GoString() string

GoString returns the string representation

func (GetDirectoryLimitsOutput) String added in v0.6.6 

func (s GetDirectoryLimitsOutput) String() string

String returns the string representation

type GetSnapshotLimitsInput 

type GetSnapshotLimitsInput struct {

	// Contains the identifier of the directory to obtain the limits for.
	DirectoryId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the GetSnapshotLimits operation.

func (GetSnapshotLimitsInput) GoString added in v0.6.6 

func (s GetSnapshotLimitsInput) GoString() string

GoString returns the string representation

func (GetSnapshotLimitsInput) String added in v0.6.6 

func (s GetSnapshotLimitsInput) String() string

String returns the string representation

func (*GetSnapshotLimitsInput) Validate added in v1.1.22 

func (s *GetSnapshotLimitsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetSnapshotLimitsOutput 

type GetSnapshotLimitsOutput struct {

	// A SnapshotLimits object that contains the manual snapshot limits for the
	// specified directory.
	SnapshotLimits *SnapshotLimits `type:"structure"`
	// contains filtered or unexported fields
}

Contains the results of the GetSnapshotLimits operation.

func (GetSnapshotLimitsOutput) GoString added in v0.6.6 

func (s GetSnapshotLimitsOutput) GoString() string

GoString returns the string representation

func (GetSnapshotLimitsOutput) String added in v0.6.6 

func (s GetSnapshotLimitsOutput) String() string

String returns the string representation

type ListTagsForResourceInput added in v1.2.5 

type ListTagsForResourceInput struct {

	// Reserved for future use.
	Limit *int64 `type:"integer"`

	// Reserved for future use.
	NextToken *string `type:"string"`

	// The ID of the directory for which you want to retrieve tags.
	ResourceId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (ListTagsForResourceInput) GoString added in v1.2.5 

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (ListTagsForResourceInput) String added in v1.2.5 

func (s ListTagsForResourceInput) String() string

String returns the string representation

func (*ListTagsForResourceInput) Validate added in v1.2.5 

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourceOutput added in v1.2.5 

type ListTagsForResourceOutput struct {

	// Reserved for future use.
	NextToken *string `type:"string"`

	// List of tags returned by the ListTagsForResource operation.
	Tags []*Tag `type:"list"`
	// contains filtered or unexported fields
}

func (ListTagsForResourceOutput) GoString added in v1.2.5 

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (ListTagsForResourceOutput) String added in v1.2.5 

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type RadiusSettings 

type RadiusSettings struct {

	// The protocol specified for your RADIUS endpoints.
	AuthenticationProtocol *string `type:"string" enum:"RadiusAuthenticationProtocol"`

	// Not currently used.
	DisplayLabel *string `min:"1" type:"string"`

	// The port that your RADIUS server is using for communications. Your on-premises
	// network must allow inbound traffic over this port from the AWS Directory
	// Service servers.
	RadiusPort *int64 `min:"1025" type:"integer"`

	// The maximum number of times that communication with the RADIUS server is
	// attempted.
	RadiusRetries *int64 `type:"integer"`

	// An array of strings that contains the IP addresses of the RADIUS server endpoints,
	// or the IP addresses of your RADIUS server load balancer.
	RadiusServers []*string `type:"list"`

	// The amount of time, in seconds, to wait for the RADIUS server to respond.
	RadiusTimeout *int64 `min:"1" type:"integer"`

	// The shared secret code that was specified when your RADIUS endpoints were
	// created.
	SharedSecret *string `min:"8" type:"string"`

	// Not currently used.
	UseSameUsername *bool `type:"boolean"`
	// contains filtered or unexported fields
}

Contains information about a Remote Authentication Dial In User Service (RADIUS) server.

func (RadiusSettings) GoString added in v0.6.6 

func (s RadiusSettings) GoString() string

GoString returns the string representation

func (RadiusSettings) String added in v0.6.6 

func (s RadiusSettings) String() string

String returns the string representation

func (*RadiusSettings) Validate added in v1.1.22 

func (s *RadiusSettings) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterEventTopicInput added in v1.1.16 

type RegisterEventTopicInput struct {

	// The Directory ID that will publish status messages to the SNS topic.
	DirectoryId *string `type:"string" required:"true"`

	// The SNS topic name to which the directory will publish status messages. This
	// SNS topic must be in the same region as the specified Directory ID.
	TopicName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Registers a new event topic.

func (RegisterEventTopicInput) GoString added in v1.1.16 

func (s RegisterEventTopicInput) GoString() string

GoString returns the string representation

func (RegisterEventTopicInput) String added in v1.1.16 

func (s RegisterEventTopicInput) String() string

String returns the string representation

func (*RegisterEventTopicInput) Validate added in v1.1.22 

func (s *RegisterEventTopicInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterEventTopicOutput added in v1.1.16 

type RegisterEventTopicOutput struct {
	// contains filtered or unexported fields
}

The result of a RegisterEventTopic request.

func (RegisterEventTopicOutput) GoString added in v1.1.16 

func (s RegisterEventTopicOutput) GoString() string

GoString returns the string representation

func (RegisterEventTopicOutput) String added in v1.1.16 

func (s RegisterEventTopicOutput) String() string

String returns the string representation

type RemoveTagsFromResourceInput added in v1.2.5 

type RemoveTagsFromResourceInput struct {

	// The ID of the directory from which to remove the tag.
	ResourceId *string `type:"string" required:"true"`

	// The tag key (name) of the tag to be removed.
	TagKeys []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (RemoveTagsFromResourceInput) GoString added in v1.2.5 

func (s RemoveTagsFromResourceInput) GoString() string

GoString returns the string representation

func (RemoveTagsFromResourceInput) String added in v1.2.5 

func (s RemoveTagsFromResourceInput) String() string

String returns the string representation

func (*RemoveTagsFromResourceInput) Validate added in v1.2.5 

func (s *RemoveTagsFromResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RemoveTagsFromResourceOutput added in v1.2.5 

type RemoveTagsFromResourceOutput struct {
	// contains filtered or unexported fields
}

func (RemoveTagsFromResourceOutput) GoString added in v1.2.5 

func (s RemoveTagsFromResourceOutput) GoString() string

GoString returns the string representation

func (RemoveTagsFromResourceOutput) String added in v1.2.5 

func (s RemoveTagsFromResourceOutput) String() string

String returns the string representation

type RestoreFromSnapshotInput 

type RestoreFromSnapshotInput struct {

	// The identifier of the snapshot to restore from.
	SnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

An object representing the inputs for the RestoreFromSnapshot operation.

func (RestoreFromSnapshotInput) GoString added in v0.6.6 

func (s RestoreFromSnapshotInput) GoString() string

GoString returns the string representation

func (RestoreFromSnapshotInput) String added in v0.6.6 

func (s RestoreFromSnapshotInput) String() string

String returns the string representation

func (*RestoreFromSnapshotInput) Validate added in v1.1.22 

func (s *RestoreFromSnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RestoreFromSnapshotOutput 

type RestoreFromSnapshotOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the RestoreFromSnapshot operation.

func (RestoreFromSnapshotOutput) GoString added in v0.6.6 

func (s RestoreFromSnapshotOutput) GoString() string

GoString returns the string representation

func (RestoreFromSnapshotOutput) String added in v0.6.6 

func (s RestoreFromSnapshotOutput) String() string

String returns the string representation

type Snapshot 

type Snapshot struct {

	// The directory identifier.
	DirectoryId *string `type:"string"`

	// The descriptive name of the snapshot.
	Name *string `type:"string"`

	// The snapshot identifier.
	SnapshotId *string `type:"string"`

	// The date and time that the snapshot was taken.
	StartTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The snapshot status.
	Status *string `type:"string" enum:"SnapshotStatus"`

	// The snapshot type.
	Type *string `type:"string" enum:"SnapshotType"`
	// contains filtered or unexported fields
}

Describes a directory snapshot.

func (Snapshot) GoString added in v0.6.6 

func (s Snapshot) GoString() string

GoString returns the string representation

func (Snapshot) String added in v0.6.6 

func (s Snapshot) String() string

String returns the string representation

type SnapshotLimits 

type SnapshotLimits struct {

	// The current number of manual snapshots of the directory.
	ManualSnapshotsCurrentCount *int64 `type:"integer"`

	// The maximum number of manual snapshots allowed.
	ManualSnapshotsLimit *int64 `type:"integer"`

	// Indicates if the manual snapshot limit has been reached.
	ManualSnapshotsLimitReached *bool `type:"boolean"`
	// contains filtered or unexported fields
}

Contains manual snapshot limit information for a directory.

func (SnapshotLimits) GoString added in v0.6.6 

func (s SnapshotLimits) GoString() string

GoString returns the string representation

func (SnapshotLimits) String added in v0.6.6 

func (s SnapshotLimits) String() string

String returns the string representation

type Tag added in v1.2.5 

type Tag struct {

	// A key is the required name of the tag. The string value can be from 1 to
	// 128 Unicode characters in length and cannot be prefixed with "aws:". The
	// string can only contain only the set of Unicode letters, digits, white-space,
	// '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").
	Key *string `min:"1" type:"string" required:"true"`

	// A value is the optional value of the tag. The string value can be from 1
	// to 256 Unicode characters in length. The string can only contain only the
	// set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-'
	// (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Metadata assigned to an Amazon Directory Services directory consisting of a key-value pair.

func (Tag) GoString added in v1.2.5 

func (s Tag) GoString() string

GoString returns the string representation

func (Tag) String added in v1.2.5 

func (s Tag) String() string

String returns the string representation

func (*Tag) Validate added in v1.2.5 

func (s *Tag) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Trust added in v1.0.5 

type Trust struct {

	// The date and time that the trust relationship was created.
	CreatedDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Directory ID of the AWS directory involved in the trust relationship.
	DirectoryId *string `type:"string"`

	// The date and time that the trust relationship was last updated.
	LastUpdatedDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Fully Qualified Domain Name (FQDN) of the external domain involved in
	// the trust relationship.
	RemoteDomainName *string `type:"string"`

	// The date and time that the TrustState was last updated.
	StateLastUpdatedDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The trust relationship direction.
	TrustDirection *string `type:"string" enum:"TrustDirection"`

	// The unique ID of the trust relationship.
	TrustId *string `type:"string"`

	// The trust relationship state.
	TrustState *string `type:"string" enum:"TrustState"`

	// The reason for the TrustState.
	TrustStateReason *string `type:"string"`

	// The trust relationship type.
	TrustType *string `type:"string" enum:"TrustType"`
	// contains filtered or unexported fields
}

Describes a trust relationship between an Microsoft AD in the AWS cloud and an external domain.

func (Trust) GoString added in v1.0.5 

func (s Trust) GoString() string

GoString returns the string representation

func (Trust) String added in v1.0.5 

func (s Trust) String() string

String returns the string representation

type UpdateConditionalForwarderInput added in v1.1.19 

type UpdateConditionalForwarderInput struct {

	// The directory ID of the AWS directory for which to update the conditional
	// forwarder.
	DirectoryId *string `type:"string" required:"true"`

	// The updated IP addresses of the remote DNS server associated with the conditional
	// forwarder.
	DnsIpAddrs []*string `type:"list" required:"true"`

	// The fully qualified domain name (FQDN) of the remote domain with which you
	// will set up a trust relationship.
	RemoteDomainName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Updates a conditional forwarder.

func (UpdateConditionalForwarderInput) GoString added in v1.1.19 

func (s UpdateConditionalForwarderInput) GoString() string

GoString returns the string representation

func (UpdateConditionalForwarderInput) String added in v1.1.19 

func (s UpdateConditionalForwarderInput) String() string

String returns the string representation

func (*UpdateConditionalForwarderInput) Validate added in v1.1.22 

func (s *UpdateConditionalForwarderInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateConditionalForwarderOutput added in v1.1.19 

type UpdateConditionalForwarderOutput struct {
	// contains filtered or unexported fields
}

The result of an UpdateConditionalForwarder request.

func (UpdateConditionalForwarderOutput) GoString added in v1.1.19 

func (s UpdateConditionalForwarderOutput) GoString() string

GoString returns the string representation

func (UpdateConditionalForwarderOutput) String added in v1.1.19 

func (s UpdateConditionalForwarderOutput) String() string

String returns the string representation

type UpdateRadiusInput 

type UpdateRadiusInput struct {

	// The identifier of the directory for which to update the RADIUS server information.
	DirectoryId *string `type:"string" required:"true"`

	// A RadiusSettings object that contains information about the RADIUS server.
	RadiusSettings *RadiusSettings `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the inputs for the UpdateRadius operation.

func (UpdateRadiusInput) GoString added in v0.6.6 

func (s UpdateRadiusInput) GoString() string

GoString returns the string representation

func (UpdateRadiusInput) String added in v0.6.6 

func (s UpdateRadiusInput) String() string

String returns the string representation

func (*UpdateRadiusInput) Validate added in v1.1.22 

func (s *UpdateRadiusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateRadiusOutput 

type UpdateRadiusOutput struct {
	// contains filtered or unexported fields
}

Contains the results of the UpdateRadius operation.

func (UpdateRadiusOutput) GoString added in v0.6.6 

func (s UpdateRadiusOutput) GoString() string

GoString returns the string representation

func (UpdateRadiusOutput) String added in v0.6.6 

func (s UpdateRadiusOutput) String() string

String returns the string representation

type VerifyTrustInput added in v1.0.5 

type VerifyTrustInput struct {

	// The unique Trust ID of the trust relationship to verify.
	TrustId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Initiates the verification of an existing trust relationship between a Microsoft AD in the AWS cloud and an external domain.

func (VerifyTrustInput) GoString added in v1.0.5 

func (s VerifyTrustInput) GoString() string

GoString returns the string representation

func (VerifyTrustInput) String added in v1.0.5 

func (s VerifyTrustInput) String() string

String returns the string representation

func (*VerifyTrustInput) Validate added in v1.1.22 

func (s *VerifyTrustInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type VerifyTrustOutput added in v1.0.5 

type VerifyTrustOutput struct {

	// The unique Trust ID of the trust relationship that was verified.
	TrustId *string `type:"string"`
	// contains filtered or unexported fields
}

Result of a VerifyTrust request.

func (VerifyTrustOutput) GoString added in v1.0.5 

func (s VerifyTrustOutput) GoString() string

GoString returns the string representation

func (VerifyTrustOutput) String added in v1.0.5 

func (s VerifyTrustOutput) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package directoryserviceiface provides an interface for the AWS Directory Service.
 Package directoryserviceiface provides an interface for the AWS Directory Service.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.