gomemcached

package module
v0.3.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 18, 2024 License: MIT Imports: 7 Imported by: 200

README

gomemcached

This is a memcached binary protocol toolkit in go.

It provides client and server functionality as well as a little sample server showing how I might make a server if I valued purity over performance.

Server Design

overview

The basic design can be seen in gocache. A storage server is run as a goroutine that receives a MCRequest on a channel, and then issues an MCResponse to a channel contained within the request.

Each connection is a separate goroutine, of course, and is responsible for all IO for that connection until the connection drops or the dataServer decides it's stupid and sends a fatal response back over the channel.

There is currently no work at all in making the thing perform (there are specific areas I know need work). This is just my attempt to learn the language somewhat.

Documentation

Overview

Package gomemcached is binary protocol packet formats and constants.

Index

Constants

View Source 
const (
	REQ_MAGIC      = 0x80
	RES_MAGIC      = 0x81
	FLEX_MAGIC     = 0x08
	FLEX_RES_MAGIC = 0x18
)
View Source 
const (
	GET        = CommandCode(0x00)
	SET        = CommandCode(0x01)
	ADD        = CommandCode(0x02)
	REPLACE    = CommandCode(0x03)
	DELETE     = CommandCode(0x04)
	INCREMENT  = CommandCode(0x05)
	DECREMENT  = CommandCode(0x06)
	QUIT       = CommandCode(0x07)
	FLUSH      = CommandCode(0x08)
	GETQ       = CommandCode(0x09)
	NOOP       = CommandCode(0x0a)
	VERSION    = CommandCode(0x0b)
	GETK       = CommandCode(0x0c)
	GETKQ      = CommandCode(0x0d)
	APPEND     = CommandCode(0x0e)
	PREPEND    = CommandCode(0x0f)
	STAT       = CommandCode(0x10)
	SETQ       = CommandCode(0x11)
	ADDQ       = CommandCode(0x12)
	REPLACEQ   = CommandCode(0x13)
	DELETEQ    = CommandCode(0x14)
	INCREMENTQ = CommandCode(0x15)
	DECREMENTQ = CommandCode(0x16)
	QUITQ      = CommandCode(0x17)
	FLUSHQ     = CommandCode(0x18)
	APPENDQ    = CommandCode(0x19)
	AUDIT      = CommandCode(0x27)
	PREPENDQ   = CommandCode(0x1a)
	GAT        = CommandCode(0x1d)
	HELLO      = CommandCode(0x1f)
	RGET       = CommandCode(0x30)
	RSET       = CommandCode(0x31)
	RSETQ      = CommandCode(0x32)
	RAPPEND    = CommandCode(0x33)
	RAPPENDQ   = CommandCode(0x34)
	RPREPEND   = CommandCode(0x35)
	RPREPENDQ  = CommandCode(0x36)
	RDELETE    = CommandCode(0x37)
	RDELETEQ   = CommandCode(0x38)
	RINCR      = CommandCode(0x39)
	RINCRQ     = CommandCode(0x3a)
	RDECR      = CommandCode(0x3b)
	RDECRQ     = CommandCode(0x3c)

	SASL_LIST_MECHS = CommandCode(0x20)
	SASL_AUTH       = CommandCode(0x21)
	SASL_STEP       = CommandCode(0x22)

	SET_BUCKET_THROTTLE_PROPERTIES = CommandCode(0x2a)
	SET_BUCKET_DATA_LIMIT_EXCEEDED = CommandCode(0x2b)
	SET_NODE_THROTTLE_PROPERTIES   = CommandCode(0x2c)

	SET_VBUCKET = CommandCode(0x3d)

	TAP_CONNECT          = CommandCode(0x40) // Client-sent request to initiate Tap feed
	TAP_MUTATION         = CommandCode(0x41) // Notification of a SET/ADD/REPLACE/etc. on the server
	TAP_DELETE           = CommandCode(0x42) // Notification of a DELETE on the server
	TAP_FLUSH            = CommandCode(0x43) // Replicates a flush_all command
	TAP_OPAQUE           = CommandCode(0x44) // Opaque control data from the engine
	TAP_VBUCKET_SET      = CommandCode(0x45) // Sets state of vbucket in receiver (used in takeover)
	TAP_CHECKPOINT_START = CommandCode(0x46) // Notifies start of new checkpoint
	TAP_CHECKPOINT_END   = CommandCode(0x47) // Notifies end of checkpoint
	GET_ALL_VB_SEQNOS    = CommandCode(0x48) // Get current high sequence numbers from all vbuckets located on the server

	UPR_OPEN        = CommandCode(0x50) // Open a UPR connection with a name
	UPR_ADDSTREAM   = CommandCode(0x51) // Sent by ebucketMigrator to UPR Consumer
	UPR_CLOSESTREAM = CommandCode(0x52) // Sent by eBucketMigrator to UPR Consumer
	UPR_FAILOVERLOG = CommandCode(0x54) // Request failover logs
	UPR_STREAMREQ   = CommandCode(0x53) // Stream request from consumer to producer
	UPR_STREAMEND   = CommandCode(0x55) // Sent by producer when it has no more messages to stream
	UPR_SNAPSHOT    = CommandCode(0x56) // Start of a new snapshot
	UPR_MUTATION    = CommandCode(0x57) // Key mutation
	UPR_DELETION    = CommandCode(0x58) // Key deletion
	UPR_EXPIRATION  = CommandCode(0x59) // Key expiration
	UPR_FLUSH       = CommandCode(0x5a) // Delete all the data for a vbucket
	UPR_NOOP        = CommandCode(0x5c) // UPR NOOP
	UPR_BUFFERACK   = CommandCode(0x5d) // UPR Buffer Acknowledgement
	UPR_CONTROL     = CommandCode(0x5e) // Set flow control params

	GET_REPLICA   = CommandCode(0x83) // Get from replica
	SELECT_BUCKET = CommandCode(0x89) // Select bucket

	OBSERVE_SEQNO = CommandCode(0x91) // Sequence Number based Observe
	OBSERVE       = CommandCode(0x92)

	GET_META                 = CommandCode(0xA0) // Get meta. returns with expiry, flags, cas etc
	SET_WITH_META            = CommandCode(0xa2)
	ADD_WITH_META            = CommandCode(0xa4)
	DELETE_WITH_META         = CommandCode(0xa8)
	GET_RANDOM_KEY           = CommandCode(0xb6)
	GET_COLLECTIONS_MANIFEST = CommandCode(0xba) // Get entire collections manifest.
	COLLECTIONS_GET_CID      = CommandCode(0xbb) // Get collection id.
	SET_TIME_SYNC            = CommandCode(0xc1)

	SUBDOC_GET            = CommandCode(0xc5) // Get subdoc. Returns with xattrs
	SUBDOC_DICT_UPSERT    = CommandCode(0xc8)
	SUBDOC_DELETE         = CommandCode(0xc9) // Delete a path
	SUBDOC_COUNTER        = CommandCode(0xcf)
	SUBDOC_MULTI_LOOKUP   = CommandCode(0xd0) // Multi lookup. Doc xattrs and meta.
	SUBDOC_MULTI_MUTATION = CommandCode(0xd1) // Multi mutation. Doc and xattr

	DCP_SYSTEM_EVENT = CommandCode(0x5f) // A system event has occurred
	DCP_SEQNO_ADV    = CommandCode(0x64) // Sent when the vb seqno has advanced due to an unsubscribed event
	DCP_OSO_SNAPSHOT = CommandCode(0x65) // Marks the begin and end of out-of-sequence-number stream

	CREATE_RANGE_SCAN   = CommandCode(0xda) // Range scans
	CONTINUE_RANGE_SCAN = CommandCode(0xdb) // Range scans
	CANCEL_RANGE_SCAN   = CommandCode(0xdc) // Range scans

	GET_ERROR_MAP = CommandCode(0xfe)
)
View Source 
const (
	SUCCESS           = Status(0x00)
	KEY_ENOENT        = Status(0x01)
	KEY_EEXISTS       = Status(0x02)
	E2BIG             = Status(0x03)
	EINVAL            = Status(0x04)
	NOT_STORED        = Status(0x05)
	DELTA_BADVAL      = Status(0x06)
	NOT_MY_VBUCKET    = Status(0x07)
	NO_BUCKET         = Status(0x08)
	LOCKED            = Status(0x09)
	WOULD_THROTTLE    = Status(0x0c)
	CONFIG_ONLY       = Status(0x0d)
	CAS_VALUE_INVALID = Status(0x0f)
	AUTH_STALE        = Status(0x1f)
	AUTH_ERROR        = Status(0x20)
	AUTH_CONTINUE     = Status(0x21)
	ERANGE            = Status(0x22)
	ROLLBACK          = Status(0x23)
	EACCESS           = Status(0x24)
	NOT_INITIALIZED   = Status(0x25)

	RATE_LIMITED_NETWORK_INGRESS = Status(0x30)
	RATE_LIMITED_NETWORK_EGRESS  = Status(0x31)
	RATE_LIMITED_MAX_CONNECTIONS = Status(0x32)
	RATE_LIMITED_MAX_COMMANDS    = Status(0x33)
	SCOPE_SIZE_LIMIT_EXCEEDED    = Status(0x34)
	BUCKET_SIZE_LIMIT_EXCEEDED   = Status(0x35)

	BUCKET_RESIDENT_RATIO_TOO_LOW = Status(0x36)
	BUCKET_DATA_SIZE_TOO_BIG      = Status(0x37)
	BUCKET_DISK_SPACE_TOO_LOW     = Status(0x38)

	UNKNOWN_COMMAND    = Status(0x81)
	ENOMEM             = Status(0x82)
	NOT_SUPPORTED      = Status(0x83)
	EINTERNAL          = Status(0x84)
	EBUSY              = Status(0x85)
	TMPFAIL            = Status(0x86)
	XATTR_EINVAL       = Status(0x87)
	UNKNOWN_COLLECTION = Status(0x88)

	DURABILITY_INVALID_LEVEL      = Status(0xa0)
	DURABILITY_IMPOSSIBLE         = Status(0xa1)
	SYNC_WRITE_IN_PROGRESS        = Status(0xa2)
	SYNC_WRITE_AMBIGUOUS          = Status(0xa3)
	SYNC_WRITE_RECOMMITINPROGRESS = Status(0xa4)

	RANGE_SCAN_MORE     = Status(0xa6)
	RANGE_SCAN_COMPLETE = Status(0xa7)

	// SUBDOC
	SUBDOC_PATH_NOT_FOUND             = Status(0xc0)
	SUBDOC_INVALID_COMBO              = Status(0xcb)
	SUBDOC_BAD_MULTI                  = Status(0xcc) // SubdocMultiPathFailure
	SUBDOC_SUCCESS_DELETED            = Status(0xcd)
	SUBDOC_MULTI_PATH_FAILURE_DELETED = Status(0xd3)
	// Not a Memcached status
	UNKNOWN_STATUS = Status(0xffff)
)

Matches with protocol/status.h as source of truth

View Source 
const (
	// doc level flags for subdoc commands
	SUBDOC_FLAG_NONE              uint8 = 0x00
	SUBDOC_FLAG_MKDOC             uint8 = 0x01 // Create if it does not exist
	SUBDOC_FLAG_ADD               uint8 = 0x02 // Add doc only if it does not exist.
	SUBDOC_FLAG_ACCESS_DELETED    uint8 = 0x04 // allow access to XATTRs for deleted document
	SUBDOC_FLAG_CREATE_AS_DELETED uint8 = 0x08 // Used with mkdoc/add
	SUBDOC_FLAG_REVIVED_DOC       uint8 = 0x10

	// path level flags for subdoc commands
	SUBDOC_FLAG_NONE_PATH          uint8 = 0x00
	SUBDOC_FLAG_MKDIR_PATH         uint8 = 0x01 // create path
	SUBDOC_FLAG_XATTR_PATH         uint8 = 0x04 // if set, the path refers to an XATTR
	SUBDOC_FLAG_EXPAND_MACRRO_PATH uint8 = 0x10 // Expand macro value inside XATTR
)
View Source 
const (
	UdTagBegin = "<ud>"
	UdTagEnd   = "</ud>"
)

for log redaction

View Source 
const (
	ComputeUnitsRead  = 1
	ComputeUnitsWrite = 2
)
View Source 
const (
	DatatypeFlagJSON       = uint8(0x01)
	DatatypeFlagCompressed = uint8(0x02)
	DatatypeFlagXattrs     = uint8(0x04)
)
View Source 
const (
	ErrorMapInvalidVersion = 0 // Unused zero value
	ErrorMapCB50           = 1 // Used for Couchbase Server 5.0+
	ErrorMapCB75           = 2 // Used for Couchbase Server 7.5+
)
View Source 
const (
	BACKFILL           = TapConnectFlag(0x01)
	DUMP               = TapConnectFlag(0x02)
	LIST_VBUCKETS      = TapConnectFlag(0x04)
	TAKEOVER_VBUCKETS  = TapConnectFlag(0x08)
	SUPPORT_ACK        = TapConnectFlag(0x10)
	REQUEST_KEYS_ONLY  = TapConnectFlag(0x20)
	CHECKPOINT         = TapConnectFlag(0x40)
	REGISTERED_CLIENT  = TapConnectFlag(0x80)
	FIX_FLAG_BYTEORDER = TapConnectFlag(0x100)
)

Tap connect option flags

View Source 
const (
	TAP_OPAQUE_ENABLE_AUTO_NACK       = 0
	TAP_OPAQUE_INITIAL_VBUCKET_STREAM = 1
	TAP_OPAQUE_ENABLE_CHECKPOINT_SYNC = 2
	TAP_OPAQUE_CLOSE_TAP_STREAM       = 7
	TAP_OPAQUE_CLOSE_BACKFILL         = 8
)

Tap opaque event subtypes

View Source 
const (
	TAP_ACK                     = 1
	TAP_NO_VALUE                = 2
	TAP_FLAG_NETWORK_BYTE_ORDER = 4
)

Tap item flags

View Source 
const FAST_FRAME_LEN = 15
View Source 
const HDR_LEN = 24

Number of bytes in a binary protocol header.

View Source 
const MAX_USER_LEN = 128

Variables

View Source 
var BufferedCommandCodeMap = map[CommandCode]bool{
	SET_VBUCKET:      true,
	UPR_STREAMEND:    true,
	UPR_SNAPSHOT:     true,
	UPR_MUTATION:     true,
	UPR_DELETION:     true,
	UPR_EXPIRATION:   true,
	DCP_SYSTEM_EVENT: true,
	DCP_SEQNO_ADV:    true,
	DCP_OSO_SNAPSHOT: true,
}

command codes that are counted toward DCP control buffer when DCP clients receive DCP messages with these command codes, they need to provide acknowledgement

View Source 
var CommandNames map[CommandCode]string

Mapping of CommandCode -> name of command (not exhaustive)

View Source 
var DCP_OPEN_INCLUDE_DELETE_TIMES uint32 = 0x20

the include deletion time bit in dcp flags

View Source 
var DCP_OPEN_INCLUDE_XATTRS uint32 = 0x04

the include XATTRS bit in dcp flags

View Source 
var DCP_PRODUCER uint32 = 0x01

the producer/consumer bit in dcp flags

View Source 
var ErrorInvalidOp error = fmt.Errorf("Specified method is not applicable")
View Source 
var ErrorObjLenNotMatch error = fmt.Errorf("Object length does not match data")
View Source 
var MaxBodyLen = int(21 * 1024 * 1024)

The maximum reasonable body length to expect. Anything larger than this will result in an error. The current limit, 21MB, is the size limit supported by ep-engine. 20MB for document value, 1MB for system extended attributes

View Source 
var SUBDOC_FLAG_XATTR uint8 = 0x04

Datatype to Include XATTRS in SUBDOC GET

View Source 
var StatusDesc map[Status]string
View Source 
var StatusNames map[Status]string

StatusNames human readable names for memcached response.

View Source 
var TapConnectFlagNames = map[TapConnectFlag]string{
	BACKFILL:           "BACKFILL",
	DUMP:               "DUMP",
	LIST_VBUCKETS:      "LIST_VBUCKETS",
	TAKEOVER_VBUCKETS:  "TAKEOVER_VBUCKETS",
	SUPPORT_ACK:        "SUPPORT_ACK",
	REQUEST_KEYS_ONLY:  "REQUEST_KEYS_ONLY",
	CHECKPOINT:         "CHECKPOINT",
	REGISTERED_CLIENT:  "REGISTERED_CLIENT",
	FIX_FLAG_BYTEORDER: "FIX_FLAG_BYTEORDER",
}

TapConnectFlagNames for TapConnectFlag

View Source 
var TapFlagParsers = map[TapConnectFlag]TapItemParser{
	BACKFILL:      TapParseUint64,
	LIST_VBUCKETS: TapParseVBList,
}

TapFlagParsers parser functions for TAP fields.

Functions

func IsFatal 

func IsFatal(e error) bool

IsFatal is false if this error isn't believed to be fatal to a connection.

func IsNotFound 

func IsNotFound(e error) bool

IsNotFound is true if this error represents a "not found" response.

func IsTenantLimit added in v0.2.1 

func IsTenantLimit(e error) bool

func Merge2HalfByteSlices 

func Merge2HalfByteSlices(src1, src2 []byte) (output []byte)

func ShiftByteSliceLeft4Bits 

func ShiftByteSliceLeft4Bits(slice []byte) (replacement []byte)

func ShiftByteSliceRight4Bits 

func ShiftByteSliceRight4Bits(slice []byte) (replacement []byte)

The following is used to theoretically support frameInfo ObjID extensions for completeness, but they are not very efficient though

func TapParseBool 

func TapParseBool(r io.Reader) (interface{}, error)

TapParseBool is a function to parse a single tap boolean.

func TapParseUint16 

func TapParseUint16(r io.Reader) (interface{}, error)

TapParseUint16 is a function to parse a single tap uint16.

func TapParseUint64 

func TapParseUint64(r io.Reader) (interface{}, error)

TapParseUint64 is a function to parse a single tap uint64.

func TapParseVBList 

func TapParseVBList(r io.Reader) (interface{}, error)

TapParseVBList parses a list of vBucket numbers as []uint16.

Types

type CommandCode 

type CommandCode uint8

CommandCode for memcached packets.

func (CommandCode) IsQuiet 

func (o CommandCode) IsQuiet() bool

IsQuiet will return true if a command is a "quiet" command.

func (CommandCode) String 

func (o CommandCode) String() (rv string)

String an op code.

type DurabilityLvl 

type DurabilityLvl uint8
const (
	DuraInvalid                    DurabilityLvl = iota // Not used (0x0)
	DuraMajority                   DurabilityLvl = iota // (0x01)
	DuraMajorityAndPersistOnMaster DurabilityLvl = iota // (0x02)
	DuraPersistToMajority          DurabilityLvl = iota // (0x03)
)

type ErrorMapVersion added in v0.3.0 

type ErrorMapVersion uint16

type FrameInfo 

type FrameInfo struct {
	ObjId   FrameObjType
	ObjLen  int
	ObjData []byte
}

func (*FrameInfo) Bytes 

func (f *FrameInfo) Bytes() ([]byte, bool)

func (*FrameInfo) GetDurabilityRequirements 

func (f *FrameInfo) GetDurabilityRequirements() (lvl DurabilityLvl, timeoutProvided bool, timeoutMs uint16, err error)

func (*FrameInfo) GetStreamId 

func (f *FrameInfo) GetStreamId() (uint16, error)

func (*FrameInfo) Validate 

func (f *FrameInfo) Validate() error

type FrameObjType 

type FrameObjType int
const (
	FrameBarrier        FrameObjType = iota // 0
	FrameDurability     FrameObjType = iota // 1
	FrameDcpStreamId    FrameObjType = iota // 2
	FrameOpenTracing    FrameObjType = iota // 3
	FrameImpersonate    FrameObjType = iota // 4
	FramePreserveExpiry FrameObjType = iota // 5
)

type MCItem 

type MCItem struct {
	Cas               uint64
	Flags, Expiration uint32
	Data              []byte
}

MCItem is an internal representation of an item.

type MCRequest 

type MCRequest struct {
	// The command being issued
	Opcode CommandCode
	// The CAS (if applicable, or 0)
	Cas uint64
	// An opaque value to be returned with this request
	Opaque uint32
	// The vbucket to which this command belongs
	VBucket uint16
	// Command extras, key, and body
	Extras, Key, Body, ExtMeta []byte
	// Datatype identifier
	DataType uint8
	// len() calls are expensive - cache this in case for collection
	Keylen int
	// Collection id for collection based operations
	CollId [binary.MaxVarintLen32]byte
	// Length of collection id
	CollIdLen int
	// Impersonate user name - could go in FramingExtras, but for efficiency
	Username [MAX_USER_LEN]byte
	// Length of Impersonate user name
	UserLen int
	// Flexible Framing Extras
	FramingExtras []FrameInfo
	// Stored length of incoming framing extras
	FramingElen int
}

MCRequest is memcached Request

func (*MCRequest) Bytes 

func (req *MCRequest) Bytes() []byte

Bytes will return the wire representation of this request.

func (*MCRequest) BytesPreallocated added in v0.2.1 

func (req *MCRequest) BytesPreallocated(out []byte)

BytesPreallocated will fill the data in the preallocated slice

func (*MCRequest) FillHeaderBytes 

func (req *MCRequest) FillHeaderBytes(data []byte) (int, bool)

func (*MCRequest) HdrSize 

func (req *MCRequest) HdrSize() int

Size gives the number of bytes this request requires.

func (*MCRequest) HeaderBytes 

func (req *MCRequest) HeaderBytes() []byte

HeaderBytes will return the wire representation of the request header (with the extras and key).

func (*MCRequest) ParseTapCommands 

func (req *MCRequest) ParseTapCommands() (TapConnect, error)

ParseTapCommands parse the tap request into the interesting bits we may need to do something with.

func (*MCRequest) Receive 

func (req *MCRequest) Receive(r io.Reader, hdrBytes []byte) (int, error)

Receive will fill this MCRequest with the data from a reader.

func (*MCRequest) Size 

func (req *MCRequest) Size() int

func (MCRequest) String 

func (req MCRequest) String() string

A debugging string representation of this request

func (*MCRequest) Transmit 

func (req *MCRequest) Transmit(w io.Writer) (n int, err error)

Transmit will send this request message across a writer.

type MCResponse 

type MCResponse struct {
	// The command opcode of the command that sent the request
	Opcode CommandCode
	// The status of the response
	Status Status
	// The opaque sent in the request
	Opaque uint32
	// The CAS identifier (if applicable)
	Cas uint64
	// Extras, key, and body for this response
	Extras, FlexibleExtras, Key, Body []byte
	// If true, this represents a fatal condition and we should hang up
	Fatal bool
	// Datatype identifier
	DataType uint8
	// contains filtered or unexported fields
}

MCResponse is memcached response

func (*MCResponse) Bytes 

func (res *MCResponse) Bytes() []byte

Bytes will return the actual bytes transmitted for this response.

func (*MCResponse) ComputeUnits added in v0.2.1 

func (res *MCResponse) ComputeUnits() (ru uint64, wu uint64)

func (*MCResponse) Error 

func (res *MCResponse) Error() string

Response as an error.

func (*MCResponse) HeaderBytes 

func (res *MCResponse) HeaderBytes() []byte

HeaderBytes will get just the header bytes for this response.

func (*MCResponse) Receive 

func (res *MCResponse) Receive(r io.Reader, hdrBytes []byte) (n int, err error)

Receive will fill this MCResponse with the data from this reader.

func (*MCResponse) ReceiveWithBuf 

func (res *MCResponse) ReceiveWithBuf(r io.Reader, hdrbytes, buf []byte) (n int, err error)

func (*MCResponse) ReceiveWithDatapool added in v0.3.1 

func (res *MCResponse) ReceiveWithDatapool(r io.Reader, hdrbytes []byte, getter func(uint64) ([]byte, error), done func([]byte)) (n int, err error)

func (*MCResponse) Recycle added in v0.3.1 

func (res *MCResponse) Recycle()

func (*MCResponse) Size 

func (res *MCResponse) Size() int

Size is number of bytes this response consumes on the wire.

func (MCResponse) String 

func (res MCResponse) String() string

A debugging string representation of this response

func (*MCResponse) Transmit 

func (res *MCResponse) Transmit(w io.Writer) (n int, err error)

Transmit will send this response message across a writer.

type MCResponsePool 

type MCResponsePool struct {
	// contains filtered or unexported fields
}

func NewMCResponsePool 

func NewMCResponsePool() *MCResponsePool

func (*MCResponsePool) Get 

func (this *MCResponsePool) Get() *MCResponse

func (*MCResponsePool) Put 

func (this *MCResponsePool) Put(r *MCResponse)

type Status 

type Status uint16

Status field for memcached response.

func (Status) String 

func (s Status) String() (rv string)

String an op code.

type StringMCResponsePool 

type StringMCResponsePool struct {
	// contains filtered or unexported fields
}

func NewStringMCResponsePool 

func NewStringMCResponsePool(size int) *StringMCResponsePool

func (*StringMCResponsePool) Get 

func (this *StringMCResponsePool) Get() map[string]*MCResponse

func (*StringMCResponsePool) Put 

func (this *StringMCResponsePool) Put(m map[string]*MCResponse)

type TapConnect 

type TapConnect struct {
	Flags         map[TapConnectFlag]interface{}
	RemainingBody []byte
	Name          string
}

type TapConnectFlag 

type TapConnectFlag uint32

func (TapConnectFlag) SplitFlags 

func (f TapConnectFlag) SplitFlags() []TapConnectFlag

SplitFlags will split the ORed flags into the individual bit flags.

func (TapConnectFlag) String 

func (f TapConnectFlag) String() string

type TapItemParser 

type TapItemParser func(io.Reader) (interface{}, error)

TapItemParser is a function to parse a single tap extra.

Source Files

View all Source files

Directories

Path Synopsis
Package memcached provides a memcached binary protocol client.
 Package memcached provides a memcached binary protocol client.
example
mocks
upr_example
Package mcdebug provides memcached client op statistics via expvar.
 Package mcdebug provides memcached client op statistics via expvar.
Package memcached provides useful functions for building your own memcached server.
 Package memcached provides useful functions for building your own memcached server.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.