estargz

package module
v0.16.2 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 27, 2024 License: Apache-2.0 Imports: 30 Imported by: 26

Documentation

Index

Constants

View Source
const (
	// TOCTarName is the name of the JSON file in the tar archive in the
	// table of contents gzip stream.
	TOCTarName = "stargz.index.json"

	// FooterSize is the number of bytes in the footer
	//
	// The footer is an empty gzip stream with no compression and an Extra
	// header of the form "%016xSTARGZ", where the 64 bit hex-encoded
	// number is the offset to the gzip stream of JSON TOC.
	//
	// 51 comes from:
	//
	// 10 bytes  gzip header
	// 2  bytes  XLEN (length of Extra field) = 26 (4 bytes header + 16 hex digits + len("STARGZ"))
	// 2  bytes  Extra: SI1 = 'S', SI2 = 'G'
	// 2  bytes  Extra: LEN = 22 (16 hex digits + len("STARGZ"))
	// 22 bytes  Extra: subfield = fmt.Sprintf("%016xSTARGZ", offsetOfTOC)
	// 5  bytes  flate header
	// 8  bytes  gzip footer
	// (End of the eStargz blob)
	//
	// NOTE: For Extra fields, subfield IDs SI1='S' SI2='G' is used for eStargz.
	FooterSize = 51

	// TOCJSONDigestAnnotation is an annotation for an image layer. This stores the
	// digest of the TOC JSON.
	// This annotation is valid only when it is specified in `.[]layers.annotations`
	// of an image manifest.
	TOCJSONDigestAnnotation = "containerd.io/snapshot/stargz/toc.digest"

	// StoreUncompressedSizeAnnotation is an additional annotation key for eStargz to enable lazy
	// pulling on containers/storage. Stargz Store is required to expose the layer's uncompressed size
	// to the runtime but current OCI image doesn't ship this information by default. So we store this
	// to the special annotation.
	StoreUncompressedSizeAnnotation = "io.containers.estargz.uncompressed-size"

	// PrefetchLandmark is a file entry which indicates the end position of
	// prefetch in the stargz file.
	PrefetchLandmark = ".prefetch.landmark"

	// NoPrefetchLandmark is a file entry which indicates that no prefetch should
	// occur in the stargz file.
	NoPrefetchLandmark = ".no.prefetch.landmark"
)

Variables

This section is empty.

Functions

func CheckGzipHasStreams added in v0.13.0

func CheckGzipHasStreams(t *testing.T, b []byte, streams []int64)

func CompressionTestSuite added in v0.8.0

func CompressionTestSuite(t *testing.T, controllers ...TestingControllerFactory)

CompressionTestSuite tests this pkg with controllers can build valid eStargz blobs and parse them.

func GzipDiffIDOf added in v0.13.0

func GzipDiffIDOf(t *testing.T, b []byte) string

func OpenFooter

func OpenFooter(sr *io.SectionReader) (tocOffset int64, footerSize int64, rErr error)

OpenFooter extracts and parses footer from the given blob. only supports gzip-based eStargz.

func Unpack added in v0.9.0

func Unpack(sr *io.SectionReader, c Decompressor) (io.ReadCloser, error)

Unpack decompresses the given estargz blob and returns a ReadCloser of the tar blob. TOC JSON and footer are removed.

Types

type Blob

type Blob struct {
	io.ReadCloser
	// contains filtered or unexported fields
}

Blob is an eStargz blob.

func Build

func Build(tarBlob *io.SectionReader, opt ...Option) (_ *Blob, rErr error)

Build builds an eStargz blob which is an extended version of stargz, from a blob (gzip, zstd or plain tar) passed through the argument. If there are some prioritized files are listed in the option, these files are grouped as "prioritized" and can be used for runtime optimization (e.g. prefetch). This function builds a blob in parallel, with dividing that blob into several (at least the number of runtime.GOMAXPROCS(0)) sub-blobs.

func (*Blob) DiffID

func (b *Blob) DiffID() digest.Digest

DiffID returns the digest of uncompressed blob. It is only valid to call DiffID after Close.

func (*Blob) TOCDigest

func (b *Blob) TOCDigest() digest.Digest

TOCDigest returns the digest of uncompressed TOC JSON.

type Compression added in v0.8.0

type Compression interface {
	Compressor
	Decompressor
}

Compression provides the compression helper to be used creating and parsing eStargz. This package provides gzip-based Compression by default, but any compression algorithm (e.g. zstd) can be used as long as it implements Compression.

type Compressor added in v0.8.0

type Compressor interface {
	// Writer returns WriteCloser to be used for writing a chunk to eStargz.
	// Everytime a chunk is written, the WriteCloser is closed and Writer is
	// called again for writing the next chunk.
	//
	// The returned writer should implement "Flush() error" function that flushes
	// any pending compressed data to the underlying writer.
	Writer(w io.Writer) (WriteFlushCloser, error)

	// WriteTOCAndFooter is called to write JTOC to the passed Writer.
	// diffHash calculates the DiffID (uncompressed sha256 hash) of the blob
	// WriteTOCAndFooter can optionally write anything that affects DiffID calculation
	// (e.g. uncompressed TOC JSON).
	//
	// This function returns tocDgst that represents the digest of TOC that will be used
	// to verify this blob when it's parsed.
	WriteTOCAndFooter(w io.Writer, off int64, toc *JTOC, diffHash hash.Hash) (tocDgst digest.Digest, err error)
}

Compressor represents the helper mothods to be used for creating eStargz.

type Decompressor added in v0.8.0

type Decompressor interface {
	// Reader returns ReadCloser to be used for decompressing file payload.
	Reader(r io.Reader) (io.ReadCloser, error)

	// FooterSize returns the size of the footer of this blob.
	FooterSize() int64

	// ParseFooter parses the footer and returns the offset and (compressed) size of TOC.
	// payloadBlobSize is the (compressed) size of the blob payload (i.e. the size between
	// the top until the TOC JSON).
	//
	// If tocOffset < 0, we assume that TOC isn't contained in the blob and pass nil reader
	// to ParseTOC. We expect that ParseTOC acquire TOC from the external location and return it.
	//
	// tocSize is optional. If tocSize <= 0, it's by default the size of the range from tocOffset until the beginning of the
	// footer (blob size - tocOff - FooterSize).
	// If blobPayloadSize < 0, blobPayloadSize become the blob size.
	ParseFooter(p []byte) (blobPayloadSize, tocOffset, tocSize int64, err error)

	// ParseTOC parses TOC from the passed reader. The reader provides the partial contents
	// of the underlying blob that has the range specified by ParseFooter method.
	//
	// This function returns tocDgst that represents the digest of TOC that will be used
	// to verify this blob. This must match to the value returned from
	// Compressor.WriteTOCAndFooter that is used when creating this blob.
	//
	// If tocOffset returned by ParseFooter is < 0, we assume that TOC isn't contained in the blob.
	// Pass nil reader to ParseTOC then we expect that ParseTOC acquire TOC from the external location
	// and return it.
	ParseTOC(r io.Reader) (toc *JTOC, tocDgst digest.Digest, err error)
}

Decompressor represents the helper mothods to be used for parsing eStargz.

type GzipCompressor added in v0.10.0

type GzipCompressor struct {
	// contains filtered or unexported fields
}

func NewGzipCompressor added in v0.10.0

func NewGzipCompressor() *GzipCompressor

func NewGzipCompressorWithLevel added in v0.8.0

func NewGzipCompressorWithLevel(level int) *GzipCompressor

func (*GzipCompressor) WriteTOCAndFooter added in v0.10.0

func (gc *GzipCompressor) WriteTOCAndFooter(w io.Writer, off int64, toc *JTOC, diffHash hash.Hash) (digest.Digest, error)

func (*GzipCompressor) Writer added in v0.10.0

func (gc *GzipCompressor) Writer(w io.Writer) (WriteFlushCloser, error)

type GzipDecompressor added in v0.8.0

type GzipDecompressor struct{}

func (*GzipDecompressor) DecompressTOC added in v0.10.0

func (gz *GzipDecompressor) DecompressTOC(r io.Reader) (tocJSON io.ReadCloser, err error)

func (*GzipDecompressor) FooterSize added in v0.8.0

func (gz *GzipDecompressor) FooterSize() int64

func (*GzipDecompressor) ParseFooter added in v0.8.0

func (gz *GzipDecompressor) ParseFooter(p []byte) (blobPayloadSize, tocOffset, tocSize int64, err error)

func (*GzipDecompressor) ParseTOC added in v0.8.0

func (gz *GzipDecompressor) ParseTOC(r io.Reader) (toc *JTOC, tocDgst digest.Digest, err error)

func (*GzipDecompressor) Reader added in v0.8.0

func (gz *GzipDecompressor) Reader(r io.Reader) (io.ReadCloser, error)

type JTOC added in v0.8.0

type JTOC struct {
	Version int         `json:"version"`
	Entries []*TOCEntry `json:"entries"`
}

JTOC is the JSON-serialized table of contents index of the files in the stargz file.

type LegacyGzipDecompressor added in v0.10.0

type LegacyGzipDecompressor struct{}

func (*LegacyGzipDecompressor) DecompressTOC added in v0.10.0

func (gz *LegacyGzipDecompressor) DecompressTOC(r io.Reader) (tocJSON io.ReadCloser, err error)

func (*LegacyGzipDecompressor) FooterSize added in v0.10.0

func (gz *LegacyGzipDecompressor) FooterSize() int64

func (*LegacyGzipDecompressor) ParseFooter added in v0.10.0

func (gz *LegacyGzipDecompressor) ParseFooter(p []byte) (blobPayloadSize, tocOffset, tocSize int64, err error)

func (*LegacyGzipDecompressor) ParseTOC added in v0.10.0

func (gz *LegacyGzipDecompressor) ParseTOC(r io.Reader) (toc *JTOC, tocDgst digest.Digest, err error)

func (*LegacyGzipDecompressor) Reader added in v0.10.0

type MeasureLatencyHook added in v0.8.0

type MeasureLatencyHook func(time.Time)

MeasureLatencyHook is a func which takes start time and records the diff

type OpenOption added in v0.8.0

type OpenOption func(o *openOpts) error

OpenOption is an option used during opening the layer

func WithDecompressors added in v0.8.0

func WithDecompressors(decompressors ...Decompressor) OpenOption

WithDecompressors option specifies decompressors to use. Default is gzip-based decompressor.

func WithTOCOffset added in v0.8.0

func WithTOCOffset(tocOffset int64) OpenOption

WithTOCOffset option specifies the offset of TOC

func WithTelemetry added in v0.8.0

func WithTelemetry(telemetry *Telemetry) OpenOption

WithTelemetry option specifies the telemetry hooks

type Option

type Option func(o *options) error

func WithAllowPrioritizeNotFound

func WithAllowPrioritizeNotFound(missedFiles *[]string) Option

WithAllowPrioritizeNotFound makes Build continue the execution even if some of prioritized files specified by WithPrioritizedFiles option aren't found in the input tar. Instead, this records all missed file names to the passed slice.

func WithChunkSize

func WithChunkSize(chunkSize int) Option

WithChunkSize option specifies the chunk size of eStargz blob to build.

func WithCompression added in v0.8.0

func WithCompression(compression Compression) Option

WithCompression specifies compression algorithm to be used. Default is gzip.

func WithCompressionLevel

func WithCompressionLevel(level int) Option

WithCompressionLevel option specifies the gzip compression level. The default is gzip.BestCompression. This option will be ignored if WithCompression option is used. See also: https://godoc.org/compress/gzip#pkg-constants

func WithContext added in v0.11.4

func WithContext(ctx context.Context) Option

WithContext specifies a context that can be used for clean canceleration.

func WithMinChunkSize added in v0.13.0

func WithMinChunkSize(minChunkSize int) Option

WithMinChunkSize option specifies the minimal number of bytes of data must be written in one gzip stream. By increasing this number, one gzip stream can contain multiple files and it hopefully leads to smaller result blob. NOTE: This adds a TOC property that old reader doesn't understand.

func WithPrioritizedFiles

func WithPrioritizedFiles(files []string) Option

WithPrioritizedFiles option specifies the list of prioritized files. These files must be complete paths that are absolute or relative to "/" For example, all of "foo/bar", "/foo/bar", "./foo/bar" and "../foo/bar" are treated as "/foo/bar".

type Reader

type Reader struct {
	// contains filtered or unexported fields
}

A Reader permits random access reads from a stargz file.

func Open

func Open(sr *io.SectionReader, opt ...OpenOption) (*Reader, error)

Open opens a stargz file for reading. The behavior is configurable using options.

Note that each entry name is normalized as the path that is relative to root.

func (*Reader) ChunkEntryForOffset

func (r *Reader) ChunkEntryForOffset(name string, offset int64) (e *TOCEntry, ok bool)

ChunkEntryForOffset returns the TOCEntry containing the byte of the named file at the given offset within the file. Name must be absolute path or one that is relative to root.

func (*Reader) Lookup

func (r *Reader) Lookup(path string) (e *TOCEntry, ok bool)

Lookup returns the Table of Contents entry for the given path.

To get the root directory, use the empty string. Path must be absolute path or one that is relative to root.

func (*Reader) OpenFile

func (r *Reader) OpenFile(name string) (*io.SectionReader, error)

OpenFile returns the reader of the specified file payload.

Name must be absolute path or one that is relative to root.

func (*Reader) OpenFileWithPreReader added in v0.13.0

func (r *Reader) OpenFileWithPreReader(name string, preRead func(*TOCEntry, io.Reader) error) (*io.SectionReader, error)

func (*Reader) TOCDigest added in v0.9.0

func (r *Reader) TOCDigest() digest.Digest

func (*Reader) Verifiers added in v0.9.0

func (r *Reader) Verifiers() (TOCEntryVerifier, error)

Verifiers returns TOCEntryVerifier of this chunk. Use VerifyTOC instead in most cases because this doesn't verify TOC.

func (*Reader) VerifyTOC

func (r *Reader) VerifyTOC(tocDigest digest.Digest) (TOCEntryVerifier, error)

VerifyTOC checks that the TOC JSON in the passed blob matches the passed digests and that the TOC JSON contains digests for all chunks contained in the blob. If the verification succceeds, this function returns TOCEntryVerifier which holds all chunk digests in the stargz blob.

type TOCEntry

type TOCEntry struct {
	// Name is the tar entry's name. It is the complete path
	// stored in the tar file, not just the base name.
	Name string `json:"name"`

	// Type is one of "dir", "reg", "symlink", "hardlink", "char",
	// "block", "fifo", or "chunk".
	// The "chunk" type is used for regular file data chunks past the first
	// TOCEntry; the 2nd chunk and on have only Type ("chunk"), Offset,
	// ChunkOffset, and ChunkSize populated.
	Type string `json:"type"`

	// Size, for regular files, is the logical size of the file.
	Size int64 `json:"size,omitempty"`

	// ModTime3339 is the modification time of the tar entry. Empty
	// means zero or unknown. Otherwise it's in UTC RFC3339
	// format. Use the ModTime method to access the time.Time value.
	ModTime3339 string `json:"modtime,omitempty"`

	// LinkName, for symlinks and hardlinks, is the link target.
	LinkName string `json:"linkName,omitempty"`

	// Mode is the permission and mode bits.
	Mode int64 `json:"mode,omitempty"`

	// UID is the user ID of the owner.
	UID int `json:"uid,omitempty"`

	// GID is the group ID of the owner.
	GID int `json:"gid,omitempty"`

	// Uname is the username of the owner.
	//
	// In the serialized JSON, this field may only be present for
	// the first entry with the same UID.
	Uname string `json:"userName,omitempty"`

	// Gname is the group name of the owner.
	//
	// In the serialized JSON, this field may only be present for
	// the first entry with the same GID.
	Gname string `json:"groupName,omitempty"`

	// Offset, for regular files, provides the offset in the
	// stargz file to the file's data bytes. See ChunkOffset and
	// ChunkSize.
	Offset int64 `json:"offset,omitempty"`

	// InnerOffset is an optional field indicates uncompressed offset
	// of this "reg" or "chunk" payload in a stream starts from Offset.
	// This field enables to put multiple "reg" or "chunk" payloads
	// in one chunk with having the same Offset but different InnerOffset.
	InnerOffset int64 `json:"innerOffset,omitempty"`

	// DevMajor is the major device number for "char" and "block" types.
	DevMajor int `json:"devMajor,omitempty"`

	// DevMinor is the major device number for "char" and "block" types.
	DevMinor int `json:"devMinor,omitempty"`

	// NumLink is the number of entry names pointing to this entry.
	// Zero means one name references this entry.
	// This field is calculated during runtime and not recorded in TOC JSON.
	NumLink int `json:"-"`

	// Xattrs are the extended attribute for the entry.
	Xattrs map[string][]byte `json:"xattrs,omitempty"`

	// Digest stores the OCI checksum for regular files payload.
	// It has the form "sha256:abcdef01234....".
	Digest string `json:"digest,omitempty"`

	// ChunkOffset is non-zero if this is a chunk of a large,
	// regular file. If so, the Offset is where the gzip header of
	// ChunkSize bytes at ChunkOffset in Name begin.
	//
	// In serialized form, a "chunkSize" JSON field of zero means
	// that the chunk goes to the end of the file. After reading
	// from the stargz TOC, though, the ChunkSize is initialized
	// to a non-zero file for when Type is either "reg" or
	// "chunk".
	ChunkOffset int64 `json:"chunkOffset,omitempty"`
	ChunkSize   int64 `json:"chunkSize,omitempty"`

	// ChunkDigest stores an OCI digest of the chunk. This must be formed
	// as "sha256:0123abcd...".
	ChunkDigest string `json:"chunkDigest,omitempty"`
	// contains filtered or unexported fields
}

TOCEntry is an entry in the stargz file's TOC (Table of Contents).

func (*TOCEntry) ForeachChild

func (e *TOCEntry) ForeachChild(f func(baseName string, ent *TOCEntry) bool)

ForeachChild calls f for each child item. If f returns false, iteration ends. If e is not a directory, f is not called.

func (*TOCEntry) LookupChild

func (e *TOCEntry) LookupChild(baseName string) (child *TOCEntry, ok bool)

LookupChild returns the directory e's child by its base name.

func (*TOCEntry) ModTime

func (e *TOCEntry) ModTime() time.Time

ModTime returns the entry's modification time.

func (*TOCEntry) NextOffset

func (e *TOCEntry) NextOffset() int64

NextOffset returns the position (relative to the start of the stargz file) of the next gzip boundary after e.Offset.

func (*TOCEntry) Stat

func (e *TOCEntry) Stat() os.FileInfo

Stat returns a FileInfo value representing e.

type TOCEntryVerifier

type TOCEntryVerifier interface {

	// Verifier provides a content verifier that can be used for verifying the
	// contents of the specified TOCEntry.
	Verifier(ce *TOCEntry) (digest.Verifier, error)
}

TOCEntryVerifier holds verifiers that are usable for verifying chunks contained in a eStargz blob.

type Telemetry added in v0.8.0

type Telemetry struct {
	GetFooterLatency      MeasureLatencyHook // measure time to get stargz footer (in milliseconds)
	GetTocLatency         MeasureLatencyHook // measure time to GET TOC JSON (in milliseconds)
	DeserializeTocLatency MeasureLatencyHook // measure time to deserialize TOC JSON (in milliseconds)
}

Telemetry is a struct which defines telemetry hooks. By implementing these hooks you should be able to record the latency metrics of the respective steps of estargz open operation. To be used with estargz.OpenWithTelemetry(...)

type TestingController added in v0.8.0

type TestingController interface {
	Compression
	TestStreams(t *testing.T, b []byte, streams []int64)
	DiffIDOf(*testing.T, []byte) string
	String() string
}

TestingController is Compression with some helper methods necessary for testing.

type TestingControllerFactory added in v0.13.0

type TestingControllerFactory func() TestingController

type WriteFlushCloser added in v0.13.0

type WriteFlushCloser interface {
	io.WriteCloser
	Flush() error
}

type Writer

type Writer struct {

	// ChunkSize optionally controls the maximum number of bytes
	// of data of a regular file that can be written in one gzip
	// stream before a new gzip stream is started.
	// Zero means to use a default, currently 4 MiB.
	ChunkSize int

	// MinChunkSize optionally controls the minimum number of bytes
	// of data must be written in one gzip stream before a new gzip
	// NOTE: This adds a TOC property that stargz snapshotter < v0.13.0 doesn't understand.
	MinChunkSize int
	// contains filtered or unexported fields
}

A Writer writes stargz files.

Use NewWriter to create a new Writer.

func NewWriter

func NewWriter(w io.Writer) *Writer

NewWriter returns a new stargz writer (gzip-based) writing to w.

The writer must be closed to write its trailing table of contents.

func NewWriterLevel

func NewWriterLevel(w io.Writer, compressionLevel int) *Writer

NewWriterLevel returns a new stargz writer (gzip-based) writing to w. The compression level is configurable.

The writer must be closed to write its trailing table of contents.

func NewWriterWithCompressor added in v0.8.0

func NewWriterWithCompressor(w io.Writer, c Compressor) *Writer

NewWriterWithCompressor returns a new stargz writer writing to w. The compression method is configurable.

The writer must be closed to write its trailing table of contents.

func (*Writer) AppendTar

func (w *Writer) AppendTar(r io.Reader) error

AppendTar reads the tar or tar.gz file from r and appends each of its contents to w.

The input r can optionally be gzip compressed but the output will always be compressed by the specified compressor.

func (*Writer) AppendTarLossLess added in v0.9.0

func (w *Writer) AppendTarLossLess(r io.Reader) error

AppendTarLossLess reads the tar or tar.gz file from r and appends each of its contents to w.

The input r can optionally be gzip compressed but the output will always be compressed by the specified compressor.

The difference of this func with AppendTar is that this writes the input tar stream into w without any modification (e.g. to header bytes).

Note that if the input tar stream already contains TOC JSON, this returns error because w cannot overwrite the TOC JSON to the one generated by w without lossy modification. To avoid this error, if the input stream is known to be stargz/estargz, you shoud decompress it and remove TOC JSON in advance.

func (*Writer) Close

func (w *Writer) Close() (digest.Digest, error)

Close writes the stargz's table of contents and flushes all the buffers, returning any error.

func (*Writer) DiffID

func (w *Writer) DiffID() string

DiffID returns the SHA-256 of the uncompressed tar bytes. It is only valid to call DiffID after Close.

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL