vnet-udpproxy

command
v0.0.0-...-bff1185 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 15, 2023 License: MIT Imports: 5 Imported by: 0

README

vnet-udpproxy

This example demonstrates how VNet can be used to communicate with non-VNet addresses using UDPProxy.

In this example we listen map the VNet Address 10.0.0.11 to a real address of our choice. We then send to our real address from three different VNet addresses.

If you pass -address 192.168.1.3:8000 the traffic will be the following

   vnet(10.0.0.11:5787) => proxy => 192.168.1.3:8000
   vnet(10.0.0.11:5788) => proxy => 192.168.1.3:8000
   vnet(10.0.0.11:5789) => proxy => 192.168.1.3:8000

Running

go run main.go -address 192.168.1.3:8000

You should see the following in tcpdump

sean@SeanLaptop:~/go/src/github.com/pion/transport/examples$ sudo tcpdump -i any udp and port 8000
tcpdump: data link type LINUX_SLL2
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on any, link-type LINUX_SLL2 (Linux cooked v2), snapshot length 262144 bytes
13:21:18.239943 lo    In  IP 192.168.1.7.40574 > 192.168.1.7.8000: UDP, length 5
13:21:18.240105 lo    In  IP 192.168.1.7.40647 > 192.168.1.7.8000: UDP, length 5
13:21:18.240304 lo    In  IP 192.168.1.7.57744 > 192.168.1.7.8000: UDP, length 5

Documentation

Overview

Package main implements an example for the virtual Net UDP proxy.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL