etcd-dump-logs

README

etcd-dump-logs

etcd-dump-logs dumps the log from data directory.

Usage:

  etcd-dump-logs [data dir]
    * Data dir is where the snapshots and WAL logs are located. The structure of the data dir should look like this:
        - data_dir/member
            - data_dir/member/snap
            - data_dir/member/wal
                - data_dir/member/wal/0000000000000000-0000000000000000.wal

Flags:

  -entry-type string
    	If set, filters output by entry type. Must be one or more than one of:
	    ConfigChange, Normal, Request, InternalRaftRequest,
	    IRRRange, IRRPut, IRRDeleteRange, IRRTxn,
	    IRRCompaction, IRRLeaseGrant, IRRLeaseRevoke
  -start-index uint
    	The index to start dumping
  -start-snap string
    	The base name of snapshot file to start dumping
  -stream-decoder string
    	The name and arguments of an executable decoding tool, the executable
    	must process hex encoded lines of binary input (from etcd-dump-logs)
	    and output a hex encoded line of binary for each input line

etcd-dump-logs -entry-type <ENTRY_TYPE_NAME(S)> [data dir]

Filter entries by type from WAL log.

$ etcd-dump-logs -entry-type IRRTxn /tmp/datadir
Snapshot:
empty
Start dupmping log entries from snapshot.
WAL metadata:
nodeID=0 clusterID=0 term=0 commitIndex=0 vote=0
WAL entries:
lastIndex=34
term	     index	type	data
   7	        13	norm	ID:8 txn:<success:<request_delete_range:<key:"a" range_end:"k8s\000\n\025\n\002v1\022\017RangeAllocation\022#\n\022\n\000\022\000\032\000\"\000*\0002\0008\000B\000z\000\022\01310.0.0.0/16\032\000\032\000\"\000" > > failure:<request_delete_range:<key:"a" range_end:"k8s\000\n\025\n\002v1\022\017RangeAllocation\022#\n\022\n\000\022\000\032\000\"\000*\0002\0008\000B\000z\000\022\01310.0.0.0/16\032\000\032\000\"\000" > > >

Entry types (IRRTxn) count is : 1

$ etcd-dump-logs -entry-type ConfigChange,IRRCompaction /tmp/datadir
Snapshot:
empty
Start dupmping log entries from snapshot.
WAL metadata:
nodeID=0 clusterID=0 term=0 commitIndex=0 vote=0
WAL entries:
lastIndex=34
term	     index	type	data
   1	         1	conf	method=ConfChangeAddNode id=2
   2	         2	conf	method=ConfChangeRemoveNode id=2
   2	         3	conf	method=ConfChangeUpdateNode id=2
   2	         4	conf	method=ConfChangeAddLearnerNode id=3
   8	        14	norm	ID:9 compaction:<physical:true >

Entry types (ConfigChange,IRRCompaction) count is : 5

etcd-dump-logs -stream-decoder <EXECUTABLE_DECODER> [data dir]

Decode each entry based on logic in the passed decoder. Decoder status and decoded data are listed in separated tab/columns in the ouput. For parsing purpose, the output from decoder are expected to be in format of "<DECODER_STATUS>|<DECODED_DATA>". Please refer to decoder_correctoutputformat.sh as an example.

However, if the decoder output format is not as expected, "decoder_status" will be "decoder output format is not right, print output anyway", and all output from decoder will be considered as "decoded_data"

$ etcd-dump-logs -stream-decoder decoder_correctoutputformat.sh  /tmp/datadir
Snapshot:
empty
Start dupmping log entries from snapshot.
WAL metadata:
nodeID=0 clusterID=0 term=0 commitIndex=0 vote=0
WAL entries:
lastIndex=34
term	     index	type	data	decoder_status	decoded_data
   1	         1	conf	method=ConfChangeAddNode id=2	ERROR	jhjaajjjahjbbbjj
   3	         2	norm	noop	OK	jhjjabjjaajfbfgjfagdfhcjbbahgbbbfhfegibbcabbfhffbbbcbbfhfibbcaebbbgiffbbedgdbhjacbjjchjjdjjjdhjiejjjehjafjjjfhjjgjjjghjahjjajjhhjajj
   3	         3	norm	method=QGET path="/path1"	OK	jhjaabjdeadgdeedaajfbfgjfagdfhcabbacgbbbcjbbcabbcabbbcbbcbbbcaebbbccbbedgdbhjjcbjjchjjdjjjdhjiejjjehjafjjjfhjjgjjjghjahjjajjhhjajj
   7	         4	norm	ID:8 txn:<success:<request_delete_range:<key:"a" range_end:"b" > > failure:<request_delete_range:<key:"a" range_end:"b" > > > 	OK	jhjhcbadabjhaajfjajafaabjafbaajhaajfjajafaabjafb
   8	         5	norm	ID:9 compaction:<physical:true > 	ERROR	jhjicajbajja
   9	         6	norm	ID:10 lease_grant:<TTL:1 ID:1 > 	ERROR	jhjadbjdjhjaajja
  12	         7	norm	ID:13 auth_enable:<> 	ERROR	jhjdcbcejj
  27	         8	norm	???	ERROR	cf
Entry types () count is : 8

$ etcd-dump-logs -stream-decoder decoder_wrongoutputformat.sh  /tmp/datadir
Snapshot:
empty
Start dupmping log entries from snapshot.
WAL metadata:
nodeID=0 clusterID=0 term=0 commitIndex=0 vote=0
WAL entries:
lastIndex=34
term	     index	type	data	decoder_status	decoded_data
   1	         1	conf	method=ConfChangeAddNode id=2	decoder output format is not right, print output anyway	jhjaajjjahjbbbjj
   3	         2	norm	noop	decoder output format is not right, print output anyway	jhjjabjjaajfbfgjfagdfhcjbbahgbbbfhfegibbcabbfhffbbbcbbfhfibbcaebbbgiffbbedgdbhjacbjjchjjdjjjdhjiejjjehjafjjjfhjjgjjjghjahjjajjhhjajj
   3	         3	norm	method=QGET path="/path1"	decoder output format is not right, print output anyway	jhjaabjdeadgdeedaajfbfgjfagdfhcabbacgbbbcjbbcabbcabbbcbbcbbbcaebbbccbbedgdbhjjcbjjchjjdjjjdhjiejjjehjafjjjfhjjgjjjghjahjjajjhhjajj
   7	         4	norm	ID:8 txn:<success:<request_delete_range:<key:"a" range_end:"b" > > failure:<request_delete_range:<key:"a" range_end:"b" > > > 	decoder output format is not right, print output anyway	jhjhcbadabjhaajfjajafaabjafbaajhaajfjajafaabjafb
   8	         5	norm	ID:9 compaction:<physical:true > 	decoder output format is not right, print output anyway	jhjicajbajja
   9	         6	norm	ID:10 lease_grant:<TTL:1 ID:1 > 	decoder output format is not right, print output anyway	jhjadbjdjhjaajja
  12	         7	norm	ID:13 auth_enable:<> 	decoder output format is not right, print output anyway	jhjdcbcejj
  27	         8	norm	???	decoder output format is not right, print output anyway	cf
Entry types () count is : 8

etcd-dump-logs -start-index [data dir]

Only shows WAL log entries after the specified start-index number, exclusively.

$ etcd-dump-logs -start-index 30  /tmp/datadir
Start dumping log entries from index 30.
WAL metadata:
nodeID=0 clusterID=0 term=0 commitIndex=0 vote=0
WAL entries:
lastIndex=34
term	     index	type	data
  25	        31	norm	ID:26 auth_role_get:<role:"role3" >
  26	        32	norm	ID:27 auth_role_grant_permission:<name:"role3" perm:<permType:WRITE key:"Keys" range_end:"RangeEnd" > >
  27	        33	norm	ID:28 auth_role_revoke_permission:<role:"role3" key:"key" range_end:"rangeend" >
  27	        34	norm	???
Entry types () count is : 4

Documentation

Overview

etcd-dump-logs is a program for analyzing etcd server write ahead logs.