rmon_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type EntryStatus 

type EntryStatus string

EntryStatus represents never exercise these additional state transitions. 

const (
	EntryStatus_valid EntryStatus = "valid"

	EntryStatus_createRequest EntryStatus = "createRequest"

	EntryStatus_underCreation EntryStatus = "underCreation"

	EntryStatus_invalid EntryStatus = "invalid"
)

type RMONMIB 

type RMONMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of Ethernet statistics entries.
	EtherStatsTable RMONMIB_EtherStatsTable

	// A list of history control entries.
	HistoryControlTable RMONMIB_HistoryControlTable

	// A list of Ethernet history entries.
	EtherHistoryTable RMONMIB_EtherHistoryTable

	// A list of alarm entries.
	AlarmTable RMONMIB_AlarmTable

	// A list of host table control entries.
	HostControlTable RMONMIB_HostControlTable

	// A list of host entries.
	HostTable RMONMIB_HostTable

	// A list of time-ordered host table entries.
	HostTimeTable RMONMIB_HostTimeTable

	// A list of top N host control entries.
	HostTopNControlTable RMONMIB_HostTopNControlTable

	// A list of top N host entries.
	HostTopNTable RMONMIB_HostTopNTable

	// A list of information entries for the traffic matrix on each interface.
	MatrixControlTable RMONMIB_MatrixControlTable

	// A list of traffic matrix entries indexed by source and destination MAC
	// address.
	MatrixSDTable RMONMIB_MatrixSDTable

	// A list of traffic matrix entries indexed by destination and source MAC
	// address.
	MatrixDSTable RMONMIB_MatrixDSTable

	// A list of packet filter entries.
	FilterTable RMONMIB_FilterTable

	// A list of packet channel entries.
	ChannelTable RMONMIB_ChannelTable

	// A list of buffers control entries.
	BufferControlTable RMONMIB_BufferControlTable

	// A list of packets captured off of a channel.
	CaptureBufferTable RMONMIB_CaptureBufferTable

	// A list of events to be generated.
	EventTable RMONMIB_EventTable

	// A list of events that have been logged.
	LogTable RMONMIB_LogTable
}

RMONMIB

func (*RMONMIB) GetEntityData 

func (rMONMIB *RMONMIB) GetEntityData() *types.CommonEntityData

type RMONMIB_AlarmTable 

type RMONMIB_AlarmTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of parameters that set up a periodic checking for alarm conditions.
	// For example, an instance of the alarmValue object might be named
	// alarmValue.8. The type is slice of RMONMIB_AlarmTable_AlarmEntry.
	AlarmEntry []*RMONMIB_AlarmTable_AlarmEntry
}

RMONMIB_AlarmTable A list of alarm entries.

func (*RMONMIB_AlarmTable) GetEntityData 

func (alarmTable *RMONMIB_AlarmTable) GetEntityData() *types.CommonEntityData

type RMONMIB_AlarmTable_AlarmEntry 

type RMONMIB_AlarmTable_AlarmEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// alarm table.  Each such entry defines a diagnostic sample at a particular
	// interval for an object on the device. The type is interface{} with range:
	// 1..65535.
	AlarmIndex interface{}

	// The interval in seconds over which the data is sampled and compared with
	// the rising and falling thresholds.  When setting this variable, care should
	// be taken in the case of deltaValue sampling - the interval should be set
	// short enough that the sampled variable is very unlikely to increase or
	// decrease by more than 2^31 - 1 during a single sampling interval.  This
	// object may not be modified if the associated alarmStatus object is equal to
	// valid(1). The type is interface{} with range: -2147483648..2147483647.
	// Units are Seconds.
	AlarmInterval interface{}

	// The object identifier of the particular variable to be sampled.  Only
	// variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER,
	// Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled.
	// Because SNMP access control is articulated entirely in terms of the
	// contents of MIB views, no access control mechanism exists that can restrict
	// the value of this object to identify only those objects that exist in a
	// particular MIB view.  Because there is thus no acceptable means of
	// restricting the read access that could be obtained through the alarm
	// mechanism, the probe must only grant write access to this object in those
	// views that have read access to all objects on the probe.  During a set
	// operation, if the supplied variable name is not available in the selected
	// MIB view, a badValue error must be returned.  If at any time the variable
	// name of an established alarmEntry is no longer available in the selected
	// MIB view, the probe must change the status of this alarmEntry to
	// invalid(4).  This object may not be modified if the associated alarmStatus
	// object is equal to valid(1). The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	AlarmVariable interface{}

	// The method of sampling the selected variable and calculating the value to
	// be compared against the thresholds.  If the value of this object is
	// absoluteValue(1), the value of the selected variable will be compared
	// directly with the thresholds at the end of the sampling interval.  If the
	// value of this object is deltaValue(2), the value of the selected variable
	// at the last sample will be subtracted from the current value, and the
	// difference compared with the thresholds.  This object may not be modified
	// if the associated alarmStatus object is equal to valid(1). The type is
	// AlarmSampleType.
	AlarmSampleType interface{}

	// The value of the statistic during the last sampling period.  For example,
	// if the sample type is deltaValue, this value will be the difference between
	// the samples at the beginning and end of the period.  If the sample type is
	// absoluteValue, this value will be the sampled value at the end of the
	// period. This is the value that is compared with the rising and falling
	// thresholds.  The value during the current sampling period is not made
	// available until the period is completed and will remain available until the
	// next period completes. The type is interface{} with range:
	// -2147483648..2147483647.
	AlarmValue interface{}

	// The alarm that may be sent when this entry is first set to valid.  If the
	// first sample after this entry becomes valid is greater than or equal to the
	// risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or
	// risingOrFallingAlarm(3), then a single rising alarm will be generated.  If
	// the first sample after this entry becomes valid is less than or equal to
	// the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or
	// risingOrFallingAlarm(3), then a single falling alarm will be generated.
	// This object may not be modified if the associated alarmStatus object is
	// equal to valid(1). The type is AlarmStartupAlarm.
	AlarmStartupAlarm interface{}

	// A threshold for the sampled statistic.  When the current sampled value is
	// greater than or equal to this threshold, and the value at the last sampling
	// interval was less than this threshold, a single event will be generated. A
	// single event will also be generated if the first sample after this entry
	// becomes valid is greater than or equal to this threshold and the associated
	// alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3).
	// After a rising event is generated, another such event will not be generated
	// until the sampled value falls below this threshold and reaches the
	// alarmFallingThreshold.  This object may not be modified if the associated
	// alarmStatus object is equal to valid(1). The type is interface{} with
	// range: -2147483648..2147483647.
	AlarmRisingThreshold interface{}

	// A threshold for the sampled statistic.  When the current sampled value is
	// less than or equal to this threshold, and the value at the last sampling
	// interval was greater than this threshold, a single event will be generated.
	// A single event will also be generated if the first sample after this entry
	// becomes valid is less than or equal to this threshold and the associated
	// alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3).
	// After a falling event is generated, another such event will not be
	// generated until the sampled value rises above this threshold and reaches
	// the alarmRisingThreshold.  This object may not be modified if the
	// associated alarmStatus object is equal to valid(1). The type is interface{}
	// with range: -2147483648..2147483647.
	AlarmFallingThreshold interface{}

	// The index of the eventEntry that is used when a rising threshold is
	// crossed.  The eventEntry identified by a particular value of this index is
	// the same as identified by the same value of the eventIndex object.  If
	// there is no corresponding entry in the eventTable, then no association
	// exists.  In particular, if this value is zero, no associated event will be
	// generated, as zero is not a valid event index.  This object may not be
	// modified if the associated alarmStatus object is equal to valid(1). The
	// type is interface{} with range: 0..65535.
	AlarmRisingEventIndex interface{}

	// The index of the eventEntry that is used when a falling threshold is
	// crossed.  The eventEntry identified by a particular value of this index is
	// the same as identified by the same value of the eventIndex object.  If
	// there is no corresponding entry in the eventTable, then no association
	// exists.  In particular, if this value is zero, no associated event will be
	// generated, as zero is not a valid event index.  This object may not be
	// modified if the associated alarmStatus object is equal to valid(1). The
	// type is interface{} with range: 0..65535.
	AlarmFallingEventIndex interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	AlarmOwner interface{}

	// The status of this alarm entry. The type is EntryStatus.
	AlarmStatus interface{}
}

RMONMIB_AlarmTable_AlarmEntry A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8

func (*RMONMIB_AlarmTable_AlarmEntry) GetEntityData 

func (alarmEntry *RMONMIB_AlarmTable_AlarmEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType 

type RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType string

RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType represents alarmStatus object is equal to valid(1). 

const (
	RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType_absoluteValue RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType = "absoluteValue"

	RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType_deltaValue RMONMIB_AlarmTable_AlarmEntry_AlarmSampleType = "deltaValue"
)

type RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm 

type RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm string

RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm represents alarmStatus object is equal to valid(1). 

const (
	RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm_risingAlarm RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm = "risingAlarm"

	RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm_fallingAlarm RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm = "fallingAlarm"

	RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm_risingOrFallingAlarm RMONMIB_AlarmTable_AlarmEntry_AlarmStartupAlarm = "risingOrFallingAlarm"
)

type RMONMIB_BufferControlTable 

type RMONMIB_BufferControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of parameters that control the collection of a stream of packets that
	// have matched filters.  As an example, an instance of the
	// bufferControlCaptureSliceSize object might be named
	// bufferControlCaptureSliceSize.3. The type is slice of
	// RMONMIB_BufferControlTable_BufferControlEntry.
	BufferControlEntry []*RMONMIB_BufferControlTable_BufferControlEntry
}

RMONMIB_BufferControlTable A list of buffers control entries.

func (*RMONMIB_BufferControlTable) GetEntityData 

func (bufferControlTable *RMONMIB_BufferControlTable) GetEntityData() *types.CommonEntityData

type RMONMIB_BufferControlTable_BufferControlEntry 

type RMONMIB_BufferControlTable_BufferControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// bufferControl table.  The value of this index shall never be zero.  Each
	// such entry defines one set of packets that is captured and controlled by
	// one or more filters. The type is interface{} with range: 1..65535.
	BufferControlIndex interface{}

	// An index that identifies the channel that is the source of packets for this
	// bufferControl table. The channel identified by a particular value of this
	// index is the same as identified by the same value of the channelIndex
	// object.  This object may not be modified if the associated
	// bufferControlStatus object is equal to valid(1). The type is interface{}
	// with range: 1..65535.
	BufferControlChannelIndex interface{}

	// This object shows whether the buffer has room to accept new packets or if
	// it is full.  If the status is spaceAvailable(1), the buffer is accepting
	// new packets normally.  If the status is full(2) and the associated
	// bufferControlFullAction object is wrapWhenFull, the buffer is accepting new
	// packets by deleting enough of the oldest packets to make room for new ones
	// as they arrive.  Otherwise, if the status is full(2) and the
	// bufferControlFullAction object is lockWhenFull, then the buffer has stopped
	// collecting packets.  When this object is set to full(2) the probe must not
	// later set it to spaceAvailable(1) except in the case of a significant gain
	// in resources such as an increase of bufferControlOctetsGranted.  In
	// particular, the wrap-mode action of deleting old packets to make room for
	// newly arrived packets must not affect the value of this object. The type is
	// BufferControlFullStatus.
	BufferControlFullStatus interface{}

	// Controls the action of the buffer when it reaches the full status.  When in
	// the lockWhenFull(1) state and a packet is added to the buffer that fills
	// the buffer, the bufferControlFullStatus will be set to full(2) and this
	// buffer will stop capturing packets. The type is BufferControlFullAction.
	BufferControlFullAction interface{}

	// The maximum number of octets of each packet that will be saved in this
	// capture buffer. For example, if a 1500 octet packet is received by the
	// probe and this object is set to 500, then only 500 octets of the packet
	// will be stored in the associated capture buffer.  If this variable is set
	// to 0, the capture buffer will save as many octets as is possible.  This
	// object may not be modified if the associated bufferControlStatus object is
	// equal to valid(1). The type is interface{} with range:
	// -2147483648..2147483647. Units are Octets.
	BufferControlCaptureSliceSize interface{}

	// The maximum number of octets of each packet in this capture buffer that
	// will be returned in an SNMP retrieval of that packet.  For example, if 500
	// octets of a packet have been stored in the associated capture buffer, the
	// associated bufferControlDownloadOffset is 0, and this object is set to 100,
	// then the captureBufferPacket object that contains the packet will contain
	// only the first 100 octets of the packet.  A prudent manager will take into
	// account possible interoperability or fragmentation problems that may occur
	// if the download slice size is set too large. In particular, conformant SNMP
	// implementations are not required to accept messages whose length exceeds
	// 484 octets, although they are encouraged to support larger datagrams
	// whenever feasible. The type is interface{} with range:
	// -2147483648..2147483647. Units are Octets.
	BufferControlDownloadSliceSize interface{}

	// The offset of the first octet of each packet in this capture buffer that
	// will be returned in an SNMP retrieval of that packet.  For example, if 500
	// octets of a packet have been stored in the associated capture buffer and
	// this object is set to 100, then the captureBufferPacket object that
	// contains the packet will contain bytes starting 100 octets into the packet.
	// The type is interface{} with range: -2147483648..2147483647. Units are
	// Octets.
	BufferControlDownloadOffset interface{}

	// The requested maximum number of octets to be saved in this captureBuffer,
	// including any implementation-specific overhead. If this variable is set to
	// -1, the capture buffer will save as many octets as is possible.  When this
	// object is created or modified, the probe should set
	// bufferControlMaxOctetsGranted as closely to this object as is possible for
	// the particular probe implementation and available resources.  However, if
	// the object has the special value of -1, the probe must set
	// bufferControlMaxOctetsGranted to -1. The type is interface{} with range:
	// -2147483648..2147483647. Units are Octets.
	BufferControlMaxOctetsRequested interface{}

	// The maximum number of octets that can be saved in this captureBuffer,
	// including overhead. If this variable is -1, the capture buffer will save as
	// many octets as possible.  When the bufferControlMaxOctetsRequested object
	// is created or modified, the probe should set this object as closely to the
	// requested value as is possible for the particular probe implementation and
	// available resources. However, if the request object has the special value
	// of -1, the probe must set this object to -1.  The probe must not lower this
	// value except as a result of a modification to the associated
	// bufferControlMaxOctetsRequested object.  When this maximum number of octets
	// is reached and a new packet is to be added to this capture buffer and the
	// corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of
	// the oldest packets associated with this capture buffer shall be deleted by
	// the agent so that the new packet can be added.  If the corresponding
	// bufferControlFullAction is set to lockWhenFull(1), the new packet shall be
	// discarded.  In either case, the probe must set bufferControlFullStatus to
	// full(2).  When the value of this object changes to a value less than the
	// current value, entries are deleted from the captureBufferTable associated
	// with this bufferControlEntry.  Enough of the oldest of these
	// captureBufferEntries shall be deleted by the agent so that the number of
	// octets used remains less than or equal to the new value of this object.
	// When the value of this object changes to a value greater than the current
	// value, the number of associated captureBufferEntries may be allowed to
	// grow. The type is interface{} with range: -2147483648..2147483647. Units
	// are Octets.
	BufferControlMaxOctetsGranted interface{}

	// The number of packets currently in this captureBuffer. The type is
	// interface{} with range: -2147483648..2147483647. Units are Packets.
	BufferControlCapturedPackets interface{}

	// The value of sysUpTime when this capture buffer was first turned on. The
	// type is interface{} with range: 0..4294967295.
	BufferControlTurnOnTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	BufferControlOwner interface{}

	// The status of this buffer Control Entry. The type is EntryStatus.
	BufferControlStatus interface{}
}

RMONMIB_BufferControlTable_BufferControlEntry A set of parameters that control the collection of a stream of packets that have matched filters. As an example, an instance of the bufferControlCaptureSliceSize object might be named bufferControlCaptureSliceSize.3

func (*RMONMIB_BufferControlTable_BufferControlEntry) GetEntityData 

func (bufferControlEntry *RMONMIB_BufferControlTable_BufferControlEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction 

type RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction string

RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction represents packets. 

const (
	RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction_lockWhenFull RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction = "lockWhenFull"

	RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction_wrapWhenFull RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullAction = "wrapWhenFull"
)

type RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus 

type RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus string

RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus represents must not affect the value of this object. 

const (
	RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus_spaceAvailable RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus = "spaceAvailable"

	RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus_full RMONMIB_BufferControlTable_BufferControlEntry_BufferControlFullStatus = "full"
)

type RMONMIB_CaptureBufferTable 

type RMONMIB_CaptureBufferTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A packet captured off of an attached network.  As an example, an instance
	// of the captureBufferPacketData object might be named
	// captureBufferPacketData.3.1783. The type is slice of
	// RMONMIB_CaptureBufferTable_CaptureBufferEntry.
	CaptureBufferEntry []*RMONMIB_CaptureBufferTable_CaptureBufferEntry
}

RMONMIB_CaptureBufferTable A list of packets captured off of a channel.

func (*RMONMIB_CaptureBufferTable) GetEntityData 

func (captureBufferTable *RMONMIB_CaptureBufferTable) GetEntityData() *types.CommonEntityData

type RMONMIB_CaptureBufferTable_CaptureBufferEntry 

type RMONMIB_CaptureBufferTable_CaptureBufferEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The index of the bufferControlEntry with which
	// this packet is associated. The type is interface{} with range: 1..65535.
	CaptureBufferControlIndex interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// captureBuffer table associated with a particular bufferControlEntry.  This
	// index will start at 1 and increase by one for each new packet added with
	// the same captureBufferControlIndex.  Should this value reach 2147483647,
	// the next packet added with the same captureBufferControlIndex shall cause
	// this value to wrap around to 1. The type is interface{} with range:
	// 1..2147483647.
	CaptureBufferIndex interface{}

	// An index that describes the order of packets that are received on a
	// particular interface. The packetID of a packet captured on an interface is
	// defined to be greater than the packetID's of all packets captured
	// previously on the same interface.  As the captureBufferPacketID object has
	// a maximum positive value of 2^31 - 1, any captureBufferPacketID object
	// shall have the value of the associated packet's packetID mod 2^31. The type
	// is interface{} with range: -2147483648..2147483647.
	CaptureBufferPacketID interface{}

	// The data inside the packet, starting at the beginning of the packet plus
	// any offset specified in the associated bufferControlDownloadOffset,
	// including any link level headers.  The length of the data in this object is
	// the minimum of the length of the captured packet minus the offset, the
	// length of the associated bufferControlCaptureSliceSize minus the offset,
	// and the associated bufferControlDownloadSliceSize.  If this minimum is less
	// than zero, this object shall have a length of zero. The type is string.
	CaptureBufferPacketData interface{}

	// The actual length (off the wire) of the packet stored in this entry,
	// including FCS octets. The type is interface{} with range:
	// -2147483648..2147483647. Units are Octets.
	CaptureBufferPacketLength interface{}

	// The number of milliseconds that had passed since this capture buffer was
	// first turned on when this packet was captured. The type is interface{} with
	// range: -2147483648..2147483647. Units are Milliseconds.
	CaptureBufferPacketTime interface{}

	// A value which indicates the error status of this packet.  The value of this
	// object is defined in the same way as filterPktStatus.  The value is a sum.
	// This sum initially takes the value zero.  Then, for each error, E, that has
	// been discovered in this packet, 2 raised to a value representing E is added
	// to the sum.  The errors defined for a packet captured off of an Ethernet
	// interface are as follows:      bit #    Error         0    Packet is longer
	// than 1518 octets         1    Packet is shorter than 64 octets         2
	// Packet experienced a CRC or Alignment error         3    First packet in
	// this capture buffer after              it was detected that some packets
	// were              not processed correctly.         4    Packet's order in
	// buffer is only approximate              (May only be set for packets sent
	// from              the probe)  For example, an Ethernet fragment would have
	// a value of 6 (2^1 + 2^2).  As this MIB is expanded to new media types, this
	// object will have other media-specific errors defined. The type is
	// interface{} with range: -2147483648..2147483647.
	CaptureBufferPacketStatus interface{}
}

RMONMIB_CaptureBufferTable_CaptureBufferEntry A packet captured off of an attached network. As an example, an instance of the captureBufferPacketData object might be named captureBufferPacketData.3.1783

func (*RMONMIB_CaptureBufferTable_CaptureBufferEntry) GetEntityData 

func (captureBufferEntry *RMONMIB_CaptureBufferTable_CaptureBufferEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_ChannelTable 

type RMONMIB_ChannelTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of parameters for a packet channel applied on a particular interface.
	// As an example, an instance of the channelMatches object might be named
	// channelMatches.3. The type is slice of RMONMIB_ChannelTable_ChannelEntry.
	ChannelEntry []*RMONMIB_ChannelTable_ChannelEntry
}

RMONMIB_ChannelTable A list of packet channel entries.

func (*RMONMIB_ChannelTable) GetEntityData 

func (channelTable *RMONMIB_ChannelTable) GetEntityData() *types.CommonEntityData

type RMONMIB_ChannelTable_ChannelEntry 

type RMONMIB_ChannelTable_ChannelEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// channel table.  Each such entry defines one channel, a logical data and
	// event stream.  It is suggested that before creating a channel, an
	// application should scan all instances of the filterChannelIndex object to
	// make sure that there are no pre-existing filters that would be
	// inadvertently be linked to the channel. The type is interface{} with range:
	// 1..65535.
	ChannelIndex interface{}

	// The value of this object uniquely identifies the interface on this remote
	// network monitoring device to which the associated filters are applied to
	// allow data into this channel.  The interface identified by a particular
	// value of this object is the same interface as identified by the same value
	// of the ifIndex object, defined in RFC 2233 [17].  The filters in this group
	// are applied to all packets on the local network segment attached to the
	// identified interface.  An agent may or may not be able to tell if
	// fundamental changes to the media of the interface have occurred and
	// necessitate an invalidation of this entry.  For example, a hot-pluggable
	// ethernet card could be pulled out and replaced by a token-ring card.  In
	// such a case, if the agent has such knowledge of the change, it is
	// recommended that it invalidate this entry.  This object may not be modified
	// if the associated channelStatus object is equal to valid(1). The type is
	// interface{} with range: 1..65535.
	ChannelIfIndex interface{}

	// This object controls the action of the filters associated with this
	// channel.  If this object is equal to acceptMatched(1), packets will be
	// accepted to this channel if they are accepted by both the packet data and
	// packet status matches of an associated filter.  If this object is equal to
	// acceptFailed(2), packets will be accepted to this channel only if they fail
	// either the packet data match or the packet status match of each of the
	// associated filters.  In particular, a channel with no associated filters
	// will match no packets if set to acceptMatched(1) case and will match all
	// packets in the acceptFailed(2) case.  This object may not be modified if
	// the associated channelStatus object is equal to valid(1). The type is
	// ChannelAcceptType.
	ChannelAcceptType interface{}

	// This object controls the flow of data through this channel. If this object
	// is on(1), data, status and events flow through this channel.  If this
	// object is off(2), data, status and events will not flow through this
	// channel. The type is ChannelDataControl.
	ChannelDataControl interface{}

	// The value of this object identifies the event that is configured to turn
	// the associated channelDataControl from off to on when the event is
	// generated.  The event identified by a particular value of this object is
	// the same event as identified by the same value of the eventIndex object.
	// If there is no corresponding entry in the eventTable, then no association
	// exists.  In fact, if no event is intended for this channel,
	// channelTurnOnEventIndex must be set to zero, a non-existent event index.
	// This object may not be modified if the associated channelStatus object is
	// equal to valid(1). The type is interface{} with range: 0..65535.
	ChannelTurnOnEventIndex interface{}

	// The value of this object identifies the event that is configured to turn
	// the associated channelDataControl from on to off when the event is
	// generated.  The event identified by a particular value of this object is
	// the same event as identified by the same value of the eventIndex object.
	// If there is no corresponding entry in the eventTable, then no association
	// exists.  In fact, if no event is intended for this channel,
	// channelTurnOffEventIndex must be set to zero, a non-existent event index.
	// This object may not be modified if the associated channelStatus object is
	// equal to valid(1). The type is interface{} with range: 0..65535.
	ChannelTurnOffEventIndex interface{}

	// The value of this object identifies the event that is configured to be
	// generated when the associated channelDataControl is on and a packet is
	// matched.  The event identified by a particular value of this object is the
	// same event as identified by the same value of the eventIndex object.  If
	// there is no corresponding entry in the eventTable, then no association
	// exists.  In fact, if no event is intended for this channel,
	// channelEventIndex must be set to zero, a non-existent event index.  This
	// object may not be modified if the associated channelStatus object is equal
	// to valid(1). The type is interface{} with range: 0..65535.
	ChannelEventIndex interface{}

	// The event status of this channel.  If this channel is configured to
	// generate events when packets are matched, a means of controlling the flow
	// of those events is often needed.  When this object is equal to
	// eventReady(1), a single event may be generated, after which this object
	// will be set by the probe to eventFired(2).  While in the eventFired(2)
	// state, no events will be generated until the object is modified to
	// eventReady(1) (or eventAlwaysReady(3)).  The management station can thus
	// easily respond to a notification of an event by re-enabling this object.
	// If the management station wishes to disable this flow control and allow
	// events to be generated at will, this object may be set to
	// eventAlwaysReady(3).  Disabling the flow control is discouraged as it can
	// result in high network traffic or other performance problems. The type is
	// ChannelEventStatus.
	ChannelEventStatus interface{}

	// The number of times this channel has matched a packet. Note that this
	// object is updated even when channelDataControl is set to off. The type is
	// interface{} with range: 0..4294967295. Units are Packets.
	ChannelMatches interface{}

	// A comment describing this channel. The type is string with length: 0..127.
	ChannelDescription interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	ChannelOwner interface{}

	// The status of this channel entry. The type is EntryStatus.
	ChannelStatus interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe      is out of some resources and decides to shed
	// load from this collection.  This count does not include packets that were
	// not counted because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	ChannelDroppedFrames interface{}

	// The value of sysUpTime when this control entry was last activated. This can
	// be used by the management station to ensure that the table has not been
	// deleted and recreated between polls. The type is interface{} with range:
	// 0..4294967295.
	ChannelCreateTime interface{}
}

RMONMIB_ChannelTable_ChannelEntry A set of parameters for a packet channel applied on a particular interface. As an example, an instance of the channelMatches object might be named channelMatches.3

func (*RMONMIB_ChannelTable_ChannelEntry) GetEntityData 

func (channelEntry *RMONMIB_ChannelTable_ChannelEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType 

type RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType string

RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType represents channelStatus object is equal to valid(1). 

const (
	RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType_acceptMatched RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType = "acceptMatched"

	RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType_acceptFailed RMONMIB_ChannelTable_ChannelEntry_ChannelAcceptType = "acceptFailed"
)

type RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl 

type RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl string

RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl represents status and events will not flow through this channel. 

const (
	RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl_on RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl = "on"

	RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl_off RMONMIB_ChannelTable_ChannelEntry_ChannelDataControl = "off"
)

type RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus 

type RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus string

RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus represents traffic or other performance problems. 

const (
	RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus_eventReady RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus = "eventReady"

	RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus_eventFired RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus = "eventFired"

	RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus_eventAlwaysReady RMONMIB_ChannelTable_ChannelEntry_ChannelEventStatus = "eventAlwaysReady"
)

type RMONMIB_EtherHistoryTable 

type RMONMIB_EtherHistoryTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An historical sample of Ethernet statistics on a particular Ethernet
	// interface.  This sample is associated with the historyControlEntry which
	// set up the parameters for a regular collection of these samples.  As an
	// example, an instance of the etherHistoryPkts object might be named
	// etherHistoryPkts.2.89. The type is slice of
	// RMONMIB_EtherHistoryTable_EtherHistoryEntry.
	EtherHistoryEntry []*RMONMIB_EtherHistoryTable_EtherHistoryEntry
}

RMONMIB_EtherHistoryTable A list of Ethernet history entries.

func (*RMONMIB_EtherHistoryTable) GetEntityData 

func (etherHistoryTable *RMONMIB_EtherHistoryTable) GetEntityData() *types.CommonEntityData

type RMONMIB_EtherHistoryTable_EtherHistoryEntry 

type RMONMIB_EtherHistoryTable_EtherHistoryEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The history of which this entry is a part.  The
	// history identified by a particular value of this index is the same history
	// as identified by the same value of historyControlIndex. The type is
	// interface{} with range: 1..65535.
	EtherHistoryIndex interface{}

	// This attribute is a key. An index that uniquely identifies the particular
	// sample this entry represents among all samples associated with the same
	// historyControlEntry. This index starts at 1 and increases by one as each
	// new sample is taken. The type is interface{} with range: 1..2147483647.
	EtherHistorySampleIndex interface{}

	// The value of sysUpTime at the start of the interval over which this sample
	// was measured.  If the probe keeps track of the time of day, it should start
	// the first sample of the history at a time such that when the next hour of
	// the day begins, a sample is started at that instant.  Note that following
	// this rule may require the probe to delay collecting the first sample of the
	// history, as each sample must be of the same interval.  Also note that the
	// sample which is currently being collected is not accessible in this table
	// until the end of its interval. The type is interface{} with range:
	// 0..4294967295.
	EtherHistoryIntervalStart interface{}

	// The total number of events in which packets were dropped by the probe due
	// to lack of resources during this sampling interval.  Note that this number
	// is not necessarily the number of packets dropped, it is just the number of
	// times this condition has been detected. The type is interface{} with range:
	// 0..4294967295.
	EtherHistoryDropEvents interface{}

	// The total number of octets of data (including those in bad packets)
	// received on the network (excluding framing bits but including FCS octets).
	// The type is interface{} with range: 0..4294967295. Units are Octets.
	EtherHistoryOctets interface{}

	// The number of packets (including bad packets) received during this sampling
	// interval. The type is interface{} with range: 0..4294967295. Units are
	// Packets.
	EtherHistoryPkts interface{}

	// The number of good packets received during this sampling interval that were
	// directed to the broadcast address. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherHistoryBroadcastPkts interface{}

	// The number of good packets received during this sampling interval that were
	// directed to a multicast address.  Note that this number does not include
	// packets addressed to the broadcast address. The type is interface{} with
	// range: 0..4294967295. Units are Packets.
	EtherHistoryMulticastPkts interface{}

	// The number of packets received during this sampling interval that had a
	// length (excluding framing bits but including FCS octets) between 64 and
	// 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS)
	// with an integral number of octets (FCS Error) or a bad FCS with a
	// non-integral number of octets (Alignment Error). The type is interface{}
	// with range: 0..4294967295. Units are Packets.
	EtherHistoryCRCAlignErrors interface{}

	// The number of packets received during this sampling interval that were less
	// than 64 octets long (excluding framing bits but including FCS octets) and
	// were otherwise well formed. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherHistoryUndersizePkts interface{}

	// The number of packets received during this sampling interval that were
	// longer than 1518 octets (excluding framing bits but including FCS octets)
	// but were otherwise well formed. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherHistoryOversizePkts interface{}

	// The total number of packets received during this sampling interval that
	// were less than 64 octets in length (excluding framing bits but including
	// FCS octets) had either a bad Frame Check Sequence (FCS) with an integral
	// number of octets (FCS Error) or a bad FCS with a non-integral number of
	// octets (Alignment Error).  Note that it is entirely normal for
	// etherHistoryFragments to increment.  This is because it counts both runts
	// (which are normal occurrences due to collisions) and noise hits. The type
	// is interface{} with range: 0..4294967295. Units are Packets.
	EtherHistoryFragments interface{}

	// The number of packets received during this sampling interval that were
	// longer than 1518 octets (excluding framing bits but including FCS octets),
	// and  had either a bad Frame Check Sequence (FCS) with an integral number of
	// octets (FCS Error) or a bad FCS with a non-integral number of octets
	// (Alignment Error).  Note that this definition of jabber is different than
	// the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4
	// (10BASE2).  These documents define jabber as the condition where any packet
	// exceeds 20 ms.  The allowed range to detect jabber is between 20 ms and 150
	// ms. The type is interface{} with range: 0..4294967295. Units are Packets.
	EtherHistoryJabbers interface{}

	// The best estimate of the total number of collisions on this Ethernet
	// segment during this sampling interval.  The value returned will depend on
	// the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section
	// 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must
	// detect a collision, in the receive mode, if three or more stations are
	// transmitting simultaneously.  A repeater port must detect a collision when
	// two or more stations are transmitting simultaneously.  Thus a probe placed
	// on a repeater port could record more collisions than a probe connected to a
	// station on the same segment would.  Probe location plays a much smaller
	// role when considering 10BASE-T.  14.2.1.4 (10BASE-T) of IEEE standard 802.3
	// defines a collision as the simultaneous presence of signals on the DO and
	// RD circuits (transmitting and receiving at the same time).  A 10BASE-T
	// station can only detect collisions when it is transmitting.  Thus probes
	// placed on a station and a repeater, should report the same number of
	// collisions.  Note also that an RMON probe inside a repeater should ideally
	// report collisions between the repeater and one or more other hosts
	// (transmit collisions as defined by IEEE 802.3k) plus receiver collisions
	// observed on any coax segments to which the repeater is connected. The type
	// is interface{} with range: 0..4294967295. Units are Collisions.
	EtherHistoryCollisions interface{}

	// The best estimate of the mean physical layer network utilization on this
	// interface during this sampling interval, in hundredths of a percent. The
	// type is interface{} with range: 0..10000.
	EtherHistoryUtilization interface{}
}

RMONMIB_EtherHistoryTable_EtherHistoryEntry An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89

func (*RMONMIB_EtherHistoryTable_EtherHistoryEntry) GetEntityData 

func (etherHistoryEntry *RMONMIB_EtherHistoryTable_EtherHistoryEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_EtherStatsTable 

type RMONMIB_EtherStatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A collection of statistics kept for a particular Ethernet interface.  As an
	// example, an instance of the etherStatsPkts object might be named
	// etherStatsPkts.1. The type is slice of
	// RMONMIB_EtherStatsTable_EtherStatsEntry.
	EtherStatsEntry []*RMONMIB_EtherStatsTable_EtherStatsEntry
}

RMONMIB_EtherStatsTable A list of Ethernet statistics entries.

func (*RMONMIB_EtherStatsTable) GetEntityData 

func (etherStatsTable *RMONMIB_EtherStatsTable) GetEntityData() *types.CommonEntityData

type RMONMIB_EtherStatsTable_EtherStatsEntry 

type RMONMIB_EtherStatsTable_EtherStatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of this object uniquely identifies this
	// etherStats entry. The type is interface{} with range: 1..65535.
	EtherStatsIndex interface{}

	// This object identifies the source of the data that this etherStats entry is
	// configured to analyze.  This source can be any ethernet interface on this
	// device. In order to identify a particular interface, this object shall
	// identify the instance of the ifIndex object, defined in RFC 2233 [17], for
	// the desired interface. For example, if an entry were to receive data from
	// interface #1, this object would be set to ifIndex.1.  The statistics in
	// this group reflect all packets on the local network segment attached to the
	// identified interface.  An agent may or may not be able to tell if
	// fundamental changes to the media of the interface have occurred and
	// necessitate an invalidation of this entry.  For example, a hot-pluggable
	// ethernet card could be pulled out and replaced by a token-ring card.  In
	// such a case, if the agent has such knowledge of the change, it is
	// recommended that it invalidate this entry.  This object may not be modified
	// if the associated etherStatsStatus object is equal to valid(1). The type is
	// string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	EtherStatsDataSource interface{}

	// The total number of events in which packets were dropped by the probe due
	// to lack of resources. Note that this number is not necessarily the number
	// of packets dropped; it is just the number of times this condition has been
	// detected. The type is interface{} with range: 0..4294967295.
	EtherStatsDropEvents interface{}

	// The total number of octets of data (including those in bad packets)
	// received on the network (excluding framing bits but including FCS octets).
	// This object can be used as a reasonable estimate of 10-Megabit ethernet
	// utilization.  If greater precision is desired, the etherStatsPkts and
	// etherStatsOctets objects should be sampled before and after a common
	// interval.  The differences in the sampled values are Pkts and Octets,
	// respectively, and the number of seconds in the interval is Interval.  These
	// values are used to calculate the Utilization as follows:
	// Pkts * (9.6 + 6.4) + (Octets * .8)  Utilization =
	// -------------------------------------                          Interval *
	// 10,000  The result of this equation is the value Utilization which is the
	// percent utilization of the ethernet segment on a scale of 0 to 100 percent.
	// The type is interface{} with range: 0..4294967295. Units are Octets.
	EtherStatsOctets interface{}

	// The total number of packets (including bad packets, broadcast packets, and
	// multicast packets) received. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherStatsPkts interface{}

	// The total number of good packets received that were directed to the
	// broadcast address.  Note that this does not include multicast packets. The
	// type is interface{} with range: 0..4294967295. Units are Packets.
	EtherStatsBroadcastPkts interface{}

	// The total number of good packets received that were directed to a multicast
	// address.  Note that this number does not include packets directed to the
	// broadcast address. The type is interface{} with range: 0..4294967295. Units
	// are Packets.
	EtherStatsMulticastPkts interface{}

	// The total number of packets received that had a length (excluding framing
	// bits, but including FCS octets) of between 64 and 1518 octets, inclusive,
	// but had either a bad Frame Check Sequence (FCS) with an integral number of
	// octets (FCS Error) or a bad FCS with a non-integral number of octets
	// (Alignment Error). The type is interface{} with range: 0..4294967295. Units
	// are Packets.
	EtherStatsCRCAlignErrors interface{}

	// The total number of packets received that were less than 64 octets long
	// (excluding framing bits, but including FCS octets) and were otherwise well
	// formed. The type is interface{} with range: 0..4294967295. Units are
	// Packets.
	EtherStatsUndersizePkts interface{}

	// The total number of packets received that were longer than 1518 octets
	// (excluding framing bits, but including FCS octets) and were otherwise well
	// formed. The type is interface{} with range: 0..4294967295. Units are
	// Packets.
	EtherStatsOversizePkts interface{}

	// The total number of packets received that were less than 64 octets in
	// length (excluding framing bits but including FCS octets) and had either a
	// bad Frame Check Sequence (FCS) with an integral number of octets (FCS
	// Error) or a bad FCS with a non-integral number of octets (Alignment Error).
	// Note that it is entirely normal for etherStatsFragments to increment.  This
	// is because it counts both runts (which are normal occurrences due to
	// collisions) and noise hits. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherStatsFragments interface{}

	// The total number of packets received that were longer than 1518 octets
	// (excluding framing bits, but including FCS octets), and had either a bad
	// Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or
	// a bad FCS with a non-integral number of octets (Alignment Error).  Note
	// that this definition of jabber is different than the definition in
	// IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2).  These
	// documents define jabber as the condition where any packet exceeds 20 ms.
	// The allowed range to detect jabber is between 20 ms and 150 ms. The type is
	// interface{} with range: 0..4294967295. Units are Packets.
	EtherStatsJabbers interface{}

	// The best estimate of the total number of collisions on this Ethernet
	// segment.  The value returned will depend on the location of the RMON probe.
	// Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard
	// 802.3 states that a station must detect a collision, in the receive mode,
	// if three or more stations are transmitting simultaneously.  A repeater port
	// must detect a collision when two or more stations are transmitting
	// simultaneously.  Thus a probe placed on a repeater port could record more
	// collisions than a probe connected to a station on the same segment would.
	// Probe location plays a much smaller role when considering 10BASE-T.
	// 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the
	// simultaneous presence of signals on the DO and RD circuits (transmitting
	// and receiving at the same time).  A 10BASE-T station can only detect
	// collisions when it is transmitting.  Thus probes placed on a station and a
	// repeater, should report the same number of collisions.  Note also that an
	// RMON probe inside a repeater should ideally report collisions between the
	// repeater and one or more other hosts (transmit collisions as defined by
	// IEEE 802.3k) plus receiver collisions observed on any coax segments to
	// which the repeater is connected. The type is interface{} with range:
	// 0..4294967295. Units are Collisions.
	EtherStatsCollisions interface{}

	// The total number of packets (including bad packets) received that were 64
	// octets in length (excluding framing bits but including FCS octets). The
	// type is interface{} with range: 0..4294967295. Units are Packets.
	EtherStatsPkts64Octets interface{}

	// The total number of packets (including bad packets) received that were
	// between 65 and 127 octets in length inclusive (excluding framing bits but
	// including FCS octets). The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	EtherStatsPkts65to127Octets interface{}

	// The total number of packets (including bad packets) received that were
	// between 128 and 255 octets in length inclusive (excluding framing bits but
	// including FCS octets). The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	EtherStatsPkts128to255Octets interface{}

	// The total number of packets (including bad packets) received that were
	// between 256 and 511 octets in length inclusive (excluding framing bits but
	// including FCS octets). The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	EtherStatsPkts256to511Octets interface{}

	// The total number of packets (including bad packets) received that were
	// between 512 and 1023 octets in length inclusive (excluding framing bits but
	// including FCS octets). The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	EtherStatsPkts512to1023Octets interface{}

	// The total number of packets (including bad packets) received that were
	// between 1024 and 1518 octets in length inclusive (excluding framing bits
	// but including FCS octets). The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	EtherStatsPkts1024to1518Octets interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	EtherStatsOwner interface{}

	// The status of this etherStats entry. The type is EntryStatus.
	EtherStatsStatus interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted      because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	EtherStatsDroppedFrames interface{}

	// The value of sysUpTime when this control entry was last activated. This can
	// be used by the management station to ensure that the table has not been
	// deleted and recreated between polls. The type is interface{} with range:
	// 0..4294967295.
	EtherStatsCreateTime interface{}
}

RMONMIB_EtherStatsTable_EtherStatsEntry A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1

func (*RMONMIB_EtherStatsTable_EtherStatsEntry) GetEntityData 

func (etherStatsEntry *RMONMIB_EtherStatsTable_EtherStatsEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_EventTable 

type RMONMIB_EventTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of parameters that describe an event to be generated when certain
	// conditions are met.  As an example, an instance of the eventLastTimeSent
	// object might be named eventLastTimeSent.6. The type is slice of
	// RMONMIB_EventTable_EventEntry.
	EventEntry []*RMONMIB_EventTable_EventEntry
}

RMONMIB_EventTable A list of events to be generated.

func (*RMONMIB_EventTable) GetEntityData 

func (eventTable *RMONMIB_EventTable) GetEntityData() *types.CommonEntityData

type RMONMIB_EventTable_EventEntry 

type RMONMIB_EventTable_EventEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// event table.  Each such entry defines one event that is to be generated
	// when the appropriate conditions occur. The type is interface{} with range:
	// 1..65535.
	EventIndex interface{}

	// A comment describing this event entry. The type is string with length:
	// 0..127.
	EventDescription interface{}

	// The type of notification that the probe will make about this event.  In the
	// case of log, an entry is made in the log table for each event.  In the case
	// of snmp-trap, an SNMP trap is sent to one or more management stations. The
	// type is EventType.
	EventType interface{}

	// If an SNMP trap is to be sent, it will be sent to the SNMP community
	// specified by this octet string. The type is string with length: 0..127.
	EventCommunity interface{}

	// The value of sysUpTime at the time this event entry last generated an
	// event.  If this entry has not generated any events, this value will be
	// zero. The type is interface{} with range: 0..4294967295.
	EventLastTimeSent interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it.  If this object contains a string starting with 'monitor'
	// and has associated entries in the log table, all connected management
	// stations should retrieve those log entries, as they may have significance
	// to all management stations connected to this device. The type is string
	// with length: 0..127.
	EventOwner interface{}

	// The status of this event entry.  If this object is not equal to valid(1),
	// all associated log entries shall be deleted by the agent. The type is
	// EntryStatus.
	EventStatus interface{}
}

RMONMIB_EventTable_EventEntry A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6

func (*RMONMIB_EventTable_EventEntry) GetEntityData 

func (eventEntry *RMONMIB_EventTable_EventEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_EventTable_EventEntry_EventType 

type RMONMIB_EventTable_EventEntry_EventType string

RMONMIB_EventTable_EventEntry_EventType represents management stations. 

const (
	RMONMIB_EventTable_EventEntry_EventType_none RMONMIB_EventTable_EventEntry_EventType = "none"

	RMONMIB_EventTable_EventEntry_EventType_log RMONMIB_EventTable_EventEntry_EventType = "log"

	RMONMIB_EventTable_EventEntry_EventType_snmptrap RMONMIB_EventTable_EventEntry_EventType = "snmptrap"

	RMONMIB_EventTable_EventEntry_EventType_logandtrap RMONMIB_EventTable_EventEntry_EventType = "logandtrap"
)

type RMONMIB_FilterTable 

type RMONMIB_FilterTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of parameters for a packet filter applied on a particular interface.
	// As an example, an instance of the filterPktData object might be named
	// filterPktData.12. The type is slice of RMONMIB_FilterTable_FilterEntry.
	FilterEntry []*RMONMIB_FilterTable_FilterEntry
}

RMONMIB_FilterTable A list of packet filter entries.

func (*RMONMIB_FilterTable) GetEntityData 

func (filterTable *RMONMIB_FilterTable) GetEntityData() *types.CommonEntityData

type RMONMIB_FilterTable_FilterEntry 

type RMONMIB_FilterTable_FilterEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// filter table.  Each such entry defines one filter that is to be applied to
	// every packet received on an interface. The type is interface{} with range:
	// 1..65535.
	FilterIndex interface{}

	// This object identifies the channel of which this filter is a part.  The
	// filters identified by a particular value of this object are associated with
	// the same channel as identified by the same value of the channelIndex
	// object. The type is interface{} with range: 1..65535.
	FilterChannelIndex interface{}

	// The offset from the beginning of each packet where a match of packet data
	// will be attempted.  This offset is measured from the point in the physical
	// layer packet after the framing bits, if any.  For example, in an Ethernet
	// frame, this point is at the beginning of the destination MAC address.  This
	// object may not be modified if the associated filterStatus object is equal
	// to valid(1). The type is interface{} with range: -2147483648..2147483647.
	// Units are Octets.
	FilterPktDataOffset interface{}

	// The data that is to be matched with the input packet. For each packet
	// received, this filter and the accompanying filterPktDataMask and
	// filterPktDataNotMask will be adjusted for the offset.  The only bits
	// relevant to this match algorithm are those that have the corresponding
	// filterPktDataMask bit equal to one.  The following three rules are then
	// applied to every packet:  (1) If the packet is too short and does not have
	// data     corresponding to part of the filterPktData, the packet     will
	// fail this data match.  (2) For each relevant bit from the packet with the
	// corresponding filterPktDataNotMask bit set to zero, if     the bit from the
	// packet is not equal to the corresponding     bit from the filterPktData,
	// then the packet will fail     this data match.  (3) If for every relevant
	// bit from the packet with the     corresponding filterPktDataNotMask bit set
	// to one, the     bit from the packet is equal to the corresponding bit
	// from the filterPktData, then the packet will fail this     data match.  Any
	// packets that have not failed any of the three matches above have passed
	// this data match.  In particular, a zero length filter will match any
	// packet.  This object may not be modified if the associated filterStatus
	// object is equal to valid(1). The type is string.
	FilterPktData interface{}

	// The mask that is applied to the match process. After adjusting this mask
	// for the offset, only those bits in the received packet that correspond to
	// bits set in this mask are relevant for further processing by the match
	// algorithm.  The offset is applied to filterPktDataMask in the same way it
	// is applied to the filter.  For the purposes of the matching algorithm, if
	// the associated filterPktData object is longer than this mask, this mask is
	// conceptually extended with '1' bits until it reaches the length of the
	// filterPktData object.  This object may not be modified if the associated
	// filterStatus object is equal to valid(1). The type is string.
	FilterPktDataMask interface{}

	// The inversion mask that is applied to the match process.  After adjusting
	// this mask for the offset, those relevant bits in the received packet that
	// correspond to bits cleared in this mask must all be equal to their
	// corresponding bits in the filterPktData object for the packet to be
	// accepted.  In addition, at least one of those relevant bits in the received
	// packet that correspond to bits set in this mask must be different to its
	// corresponding bit in the filterPktData object.  For the purposes of the
	// matching algorithm, if the associated filterPktData object is longer than
	// this mask, this mask is conceptually extended with '0' bits until it
	// reaches the length of the filterPktData object.  This object may not be
	// modified if the associated filterStatus object is equal to valid(1). The
	// type is string.
	FilterPktDataNotMask interface{}

	// The status that is to be matched with the input packet. The only bits
	// relevant to this match algorithm are those that have the corresponding
	// filterPktStatusMask bit equal to one. The following two rules are then
	// applied to every packet:  (1) For each relevant bit from the packet status
	// with the     corresponding filterPktStatusNotMask bit set to zero, if
	// the bit from the packet status is not equal to the     corresponding bit
	// from the filterPktStatus, then the     packet will fail this status match.
	// (2) If for every relevant bit from the packet status with the
	// corresponding filterPktStatusNotMask bit set to one, the     bit from the
	// packet status is equal to the corresponding     bit from the
	// filterPktStatus, then the packet will fail     this status match.  Any
	// packets that have not failed either of the two matches above have passed
	// this status match.  In particular, a zero length status filter will match
	// any packet's status.  The value of the packet status is a sum.  This sum
	// initially takes the value zero.  Then, for each error, E, that has been
	// discovered in this packet, 2 raised to a value representing E is added to
	// the sum. The errors and the bits that represent them are dependent on the
	// media type of the interface that this channel is receiving packets from.
	// The errors defined for a packet captured off of an Ethernet interface are
	// as follows:      bit #    Error         0    Packet is longer than 1518
	// octets         1    Packet is shorter than 64 octets         2    Packet
	// experienced a CRC or Alignment error  For example, an Ethernet fragment
	// would have a value of 6 (2^1 + 2^2).  As this MIB is expanded to new media
	// types, this object will have other media-specific errors defined.  For the
	// purposes of this status matching algorithm, if the packet status is longer
	// than this filterPktStatus object, this object is conceptually extended with
	// '0' bits until it reaches the size of the packet status.  This object may
	// not be modified if the associated filterStatus object is equal to valid(1).
	// The type is interface{} with range: -2147483648..2147483647.
	FilterPktStatus interface{}

	// The mask that is applied to the status match process. Only those bits in
	// the received packet that correspond to bits set in this mask are relevant
	// for further processing by the status match algorithm.  For the purposes of
	// the matching algorithm, if the associated filterPktStatus object is longer
	// than this mask, this mask is conceptually extended with '1' bits until it
	// reaches the size of the filterPktStatus.  In addition, if a packet status
	// is longer than this mask, this mask is conceptually extended with '0' bits
	// until it reaches the size of the packet status.  This object may not be
	// modified if the associated filterStatus object is equal to valid(1). The
	// type is interface{} with range: -2147483648..2147483647.
	FilterPktStatusMask interface{}

	// The inversion mask that is applied to the status match process.  Those
	// relevant bits in the received packet status that correspond to bits cleared
	// in this mask must all be equal to their corresponding bits in the
	// filterPktStatus object for the packet to be accepted.  In addition, at
	// least one of those relevant bits in the received packet status that
	// correspond to bits set in this mask must be different to its corresponding
	// bit in the filterPktStatus object for the packet to be accepted.  For the
	// purposes of the matching algorithm, if the associated filterPktStatus
	// object or a packet status is longer than this mask, this mask is
	// conceptually extended with '0' bits until it reaches the longer of the
	// lengths of the filterPktStatus object and the packet status.  This object
	// may not be modified if the associated filterStatus object is equal to
	// valid(1). The type is interface{} with range: -2147483648..2147483647.
	FilterPktStatusNotMask interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	FilterOwner interface{}

	// The status of this filter entry. The type is EntryStatus.
	FilterStatus interface{}

	// When this object is set to a non-zero value, the filter that it is
	// associated with performs the following operations on every packet:  1) - If
	// the packet doesn't match the protocol directory entry      identified by
	// this object, discard the packet and exit      (i.e., discard the packet if
	// it is not of the identified      protocol). 2) - If the associated
	// filterProtocolDirLocalIndex is non-zero      and the packet doesn't match
	// the protocol directory      entry identified by that object, discard the
	// packet and      exit 3) - If the packet matches, perform the regular filter
	// algorithm as if the beginning of this named protocol is      the beginning
	// of the packet, potentially applying the      filterOffset value to move
	// further into the packet. The type is interface{} with range: 0..2147483647.
	FilterProtocolDirDataLocalIndex interface{}

	// When this object is set to a non-zero value, the filter that it is
	// associated with will discard the packet if the packet doesn't match this
	// protocol directory entry. The type is interface{} with range:
	// 0..2147483647.
	FilterProtocolDirLocalIndex interface{}
}

RMONMIB_FilterTable_FilterEntry A set of parameters for a packet filter applied on a particular interface. As an example, an instance of the filterPktData object might be named filterPktData.12

func (*RMONMIB_FilterTable_FilterEntry) GetEntityData 

func (filterEntry *RMONMIB_FilterTable_FilterEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HistoryControlTable 

type RMONMIB_HistoryControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of parameters that set up a periodic sampling of statistics.  As an
	// example, an instance of the historyControlInterval object might be named
	// historyControlInterval.2. The type is slice of
	// RMONMIB_HistoryControlTable_HistoryControlEntry.
	HistoryControlEntry []*RMONMIB_HistoryControlTable_HistoryControlEntry
}

RMONMIB_HistoryControlTable A list of history control entries.

func (*RMONMIB_HistoryControlTable) GetEntityData 

func (historyControlTable *RMONMIB_HistoryControlTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HistoryControlTable_HistoryControlEntry 

type RMONMIB_HistoryControlTable_HistoryControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// historyControl table.  Each such entry defines a set of samples at a
	// particular interval for an interface on the device. The type is interface{}
	// with range: 1..65535.
	HistoryControlIndex interface{}

	// This object identifies the source of the data for which historical data was
	// collected and placed in a media-specific table on behalf of this
	// historyControlEntry.  This source can be any interface on this device.  In
	// order to identify a particular interface, this object shall identify the
	// instance of the ifIndex object, defined in  RFC 2233 [17], for the desired
	// interface. For example, if an entry were to receive data from interface #1,
	// this object would be set to ifIndex.1.  The statistics in this group
	// reflect all packets on the local network segment attached to the identified
	// interface.  An agent may or may not be able to tell if fundamental changes
	// to the media of the interface have occurred and necessitate an invalidation
	// of this entry.  For example, a hot-pluggable ethernet card could be pulled
	// out and replaced by a token-ring card.  In such a case, if the agent has
	// such knowledge of the change, it is recommended that it invalidate this
	// entry.  This object may not be modified if the associated
	// historyControlStatus object is equal to valid(1). The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	HistoryControlDataSource interface{}

	// The requested number of discrete time intervals over which data is to be
	// saved in the part of the media-specific table associated with this
	// historyControlEntry.  When this object is created or modified, the probe
	// should set historyControlBucketsGranted as closely to this object as is
	// possible for the particular probe implementation and available resources.
	// The type is interface{} with range: 1..65535.
	HistoryControlBucketsRequested interface{}

	// The number of discrete sampling intervals over which data shall be saved in
	// the part of the media-specific table associated with this
	// historyControlEntry. When the associated historyControlBucketsRequested
	// object is created or modified, the probe should set this object as closely
	// to the requested value as is possible for the particular probe
	// implementation and available resources.  The probe must not lower this
	// value except as a result of a modification to the associated
	// historyControlBucketsRequested object.  There will be times when the actual
	// number of buckets associated with this entry is less than the value of this
	// object.  In this case, at the end of each sampling interval, a new bucket
	// will be added to the media-specific table.  When the number of buckets
	// reaches the value of this object and a new bucket is to be added to the
	// media-specific table, the oldest bucket associated with this
	// historyControlEntry shall be deleted by the agent so that the new bucket
	// can be added.  When the value of this object changes to a value less than
	// the current value, entries are deleted from the media-specific table
	// associated with this historyControlEntry.  Enough of the oldest of these
	// entries shall be deleted by the agent so that their number remains less
	// than or equal to the new value of this object.  When the value of this
	// object changes to a value greater than the current value, the number of
	// associated media- specific entries may be allowed to grow. The type is
	// interface{} with range: 1..65535.
	HistoryControlBucketsGranted interface{}

	// The interval in seconds over which the data is sampled for each bucket in
	// the part of the media-specific table associated with this
	// historyControlEntry.  This interval can be set to any number of seconds
	// between 1 and 3600 (1 hour).  Because the counters in a bucket may overflow
	// at their maximum value with no indication, a prudent manager will take into
	// account the possibility of overflow in any of the associated counters.  It
	// is important to consider the minimum time in which any counter could
	// overflow on a particular media type and set the historyControlInterval
	// object to a value less than this interval.  This is typically most
	// important for the 'octets' counter in any media-specific table.  For
	// example, on an Ethernet network, the etherHistoryOctets counter could
	// overflow in about one hour at the Ethernet's maximum utilization.  This
	// object may not be modified if the associated historyControlStatus object is
	// equal to valid(1). The type is interface{} with range: 1..3600. Units are
	// Seconds.
	HistoryControlInterval interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	HistoryControlOwner interface{}

	// The status of this historyControl entry.  Each instance of the
	// media-specific table associated with this historyControlEntry will be
	// deleted by the agent if this historyControlEntry is not equal to valid(1).
	// The type is EntryStatus.
	HistoryControlStatus interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this      collection.  This count does not include packets that were
	// not counted because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	HistoryControlDroppedFrames interface{}
}

RMONMIB_HistoryControlTable_HistoryControlEntry A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2

func (*RMONMIB_HistoryControlTable_HistoryControlEntry) GetEntityData 

func (historyControlEntry *RMONMIB_HistoryControlTable_HistoryControlEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HostControlTable 

type RMONMIB_HostControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of parameters that set up the discovery of hosts on a particular
	// interface and the collection of statistics about these hosts.  For example,
	// an instance of the hostControlTableSize object might be named
	// hostControlTableSize.1. The type is slice of
	// RMONMIB_HostControlTable_HostControlEntry.
	HostControlEntry []*RMONMIB_HostControlTable_HostControlEntry
}

RMONMIB_HostControlTable A list of host table control entries.

func (*RMONMIB_HostControlTable) GetEntityData 

func (hostControlTable *RMONMIB_HostControlTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HostControlTable_HostControlEntry 

type RMONMIB_HostControlTable_HostControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hostControl table.  Each such entry defines a function that discovers hosts
	// on a particular interface and places statistics about them in the hostTable
	// and the hostTimeTable on behalf of this hostControlEntry. The type is
	// interface{} with range: 1..65535.
	HostControlIndex interface{}

	// This object identifies the source of the data for this instance of the host
	// function.  This source can be any interface on this device.  In order to
	// identify a particular interface, this object shall identify the instance of
	// the ifIndex object, defined in RFC 2233 [17], for the desired interface.
	// For example, if an entry were to receive data from interface #1, this
	// object would be set to ifIndex.1.  The statistics in this group reflect all
	// packets on the local network segment attached to the identified interface.
	// An agent may or may not be able to tell if fundamental changes to the media
	// of the interface have occurred and necessitate an invalidation of this
	// entry.  For example, a hot-pluggable ethernet card could be pulled out and
	// replaced by a token-ring card.  In such a case, if the agent has such
	// knowledge of the change, it is recommended that it invalidate this entry.
	// This object may not be modified if the associated hostControlStatus object
	// is equal to valid(1). The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	HostControlDataSource interface{}

	// The number of hostEntries in the hostTable and the hostTimeTable associated
	// with this hostControlEntry. The type is interface{} with range:
	// -2147483648..2147483647.
	HostControlTableSize interface{}

	// The value of sysUpTime when the last entry was deleted from the portion of
	// the hostTable associated with this hostControlEntry.  If no deletions have
	// occurred, this value shall be zero. The type is interface{} with range:
	// 0..4294967295.
	HostControlLastDeleteTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	HostControlOwner interface{}

	// The status of this hostControl entry.  If this object is not equal to
	// valid(1), all associated entries in the hostTable, hostTimeTable, and the
	// hostTopNTable shall be deleted by the agent. The type is EntryStatus.
	HostControlStatus interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	HostControlDroppedFrames interface{}

	// The value of sysUpTime when this control entry was last activated. This can
	// be used by the management station to ensure that the table has not been
	// deleted and recreated between polls. The type is interface{} with range:
	// 0..4294967295.
	HostControlCreateTime interface{}
}

RMONMIB_HostControlTable_HostControlEntry A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts. For example, an instance of the hostControlTableSize object might be named hostControlTableSize.1

func (*RMONMIB_HostControlTable_HostControlEntry) GetEntityData 

func (hostControlEntry *RMONMIB_HostControlTable_HostControlEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTable 

type RMONMIB_HostTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A collection of statistics for a particular host that has been discovered
	// on an interface of this device.  For example, an instance of the
	// hostOutBroadcastPkts object might be named
	// hostOutBroadcastPkts.1.6.8.0.32.27.3.176. The type is slice of
	// RMONMIB_HostTable_HostEntry.
	HostEntry []*RMONMIB_HostTable_HostEntry
}

RMONMIB_HostTable A list of host entries.

func (*RMONMIB_HostTable) GetEntityData 

func (hostTable *RMONMIB_HostTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTable_HostEntry 

type RMONMIB_HostTable_HostEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The set of collected host statistics of which this
	// entry is a part.  The set of hosts identified by a particular value of this
	// index is associated with the hostControlEntry as identified by the same
	// value of hostControlIndex. The type is interface{} with range: 1..65535.
	HostIndex interface{}

	// This attribute is a key. The physical address of this host. The type is
	// string.
	HostAddress interface{}

	// An index that defines the relative ordering of the creation time of hosts
	// captured for a particular hostControlEntry.  This index shall be between 1
	// and N, where N is the value of the associated hostControlTableSize.  The
	// ordering of the indexes is based on the order of each entry's insertion
	// into the table, in which entries added earlier have a lower index value
	// than entries added later.  It is important to note that the order for a
	// particular entry may change as an (earlier) entry is deleted from the
	// table.  Because this order may change, management stations should make use
	// of the hostControlLastDeleteTime variable in the hostControlEntry
	// associated with the relevant portion of the hostTable.  By observing this
	// variable, the management station may detect the circumstances where a
	// previous association between a value of hostCreationOrder and a hostEntry
	// may no longer hold. The type is interface{} with range: 1..65535.
	HostCreationOrder interface{}

	// The number of good packets transmitted to this address since it was added
	// to the hostTable. The type is interface{} with range: 0..4294967295. Units
	// are Packets.
	HostInPkts interface{}

	// The number of packets, including bad packets, transmitted by this address
	// since it was added to the hostTable. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	HostOutPkts interface{}

	// The number of octets transmitted to this address since it was added to the
	// hostTable (excluding framing bits but including FCS octets), except for
	// those octets in bad packets. The type is interface{} with range:
	// 0..4294967295. Units are Octets.
	HostInOctets interface{}

	// The number of octets transmitted by this address since it was added to the
	// hostTable (excluding framing bits but including FCS octets), including
	// those octets in bad packets. The type is interface{} with range:
	// 0..4294967295. Units are Octets.
	HostOutOctets interface{}

	// The number of bad packets transmitted by this address since this host was
	// added to the hostTable. The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	HostOutErrors interface{}

	// The number of good packets transmitted by this address that were directed
	// to the broadcast address since this host was added to the hostTable. The
	// type is interface{} with range: 0..4294967295. Units are Packets.
	HostOutBroadcastPkts interface{}

	// The number of good packets transmitted by this address that were directed
	// to a multicast address since this host was added to the hostTable. Note
	// that this number does not include packets directed to the broadcast
	// address. The type is interface{} with range: 0..4294967295. Units are
	// Packets.
	HostOutMulticastPkts interface{}
}

RMONMIB_HostTable_HostEntry A collection of statistics for a particular host that has been discovered on an interface of this device. For example, an instance of the hostOutBroadcastPkts object might be named hostOutBroadcastPkts.1.6.8.0.32.27.3.176

func (*RMONMIB_HostTable_HostEntry) GetEntityData 

func (hostEntry *RMONMIB_HostTable_HostEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTimeTable 

type RMONMIB_HostTimeTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A collection of statistics for a particular host that has been discovered
	// on an interface of this device.  This collection includes the relative
	// ordering of the creation time of this object.  For example, an instance of
	// the hostTimeOutBroadcastPkts object might be named
	// hostTimeOutBroadcastPkts.1.687. The type is slice of
	// RMONMIB_HostTimeTable_HostTimeEntry.
	HostTimeEntry []*RMONMIB_HostTimeTable_HostTimeEntry
}

RMONMIB_HostTimeTable A list of time-ordered host table entries.

func (*RMONMIB_HostTimeTable) GetEntityData 

func (hostTimeTable *RMONMIB_HostTimeTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTimeTable_HostTimeEntry 

type RMONMIB_HostTimeTable_HostTimeEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The set of collected host statistics of which this
	// entry is a part.  The set of hosts identified by a particular value of this
	// index is associated with the hostControlEntry as identified by the same
	// value of hostControlIndex. The type is interface{} with range: 1..65535.
	HostTimeIndex interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hostTime table among those entries associated with the same
	// hostControlEntry.  This index shall be between 1 and N, where N is the
	// value of the associated hostControlTableSize.  The ordering of the indexes
	// is based on the order of each entry's insertion into the table, in which
	// entries added earlier have a lower index value than entries added later.
	// Thus the management station has the ability to learn of new entries added
	// to this table without downloading the entire table.  It is important to
	// note that the index for a particular entry may change as an (earlier) entry
	// is deleted from the table.  Because this order may change, management
	// stations should make use of the hostControlLastDeleteTime variable in the
	// hostControlEntry associated with the relevant portion of the hostTimeTable.
	// By observing this variable, the management station may detect the
	// circumstances where a download of the table may have missed entries, and
	// where a previous association between a value of hostTimeCreationOrder and a
	// hostTimeEntry may no longer hold. The type is interface{} with range:
	// 1..65535.
	HostTimeCreationOrder interface{}

	// The physical address of this host. The type is string.
	HostTimeAddress interface{}

	// The number of good packets transmitted to this address since it was added
	// to the hostTimeTable. The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	HostTimeInPkts interface{}

	// The number of packets, including bad packets, transmitted by this address
	// since it was added to the hostTimeTable. The type is interface{} with
	// range: 0..4294967295. Units are Packets.
	HostTimeOutPkts interface{}

	// The number of octets transmitted to this address since it was added to the
	// hostTimeTable (excluding framing bits but including FCS octets), except for
	// those octets in bad packets. The type is interface{} with range:
	// 0..4294967295. Units are Octets.
	HostTimeInOctets interface{}

	// The number of octets transmitted by this address since it was added to the
	// hostTimeTable (excluding framing bits but including FCS octets), including
	// those octets in bad packets. The type is interface{} with range:
	// 0..4294967295. Units are Octets.
	HostTimeOutOctets interface{}

	// The number of bad packets transmitted by this address since this host was
	// added to the hostTimeTable. The type is interface{} with range:
	// 0..4294967295. Units are Packets.
	HostTimeOutErrors interface{}

	// The number of good packets transmitted by this address that were directed
	// to the broadcast address since this host was added to the hostTimeTable.
	// The type is interface{} with range: 0..4294967295. Units are Packets.
	HostTimeOutBroadcastPkts interface{}

	// The number of good packets transmitted by this address that were directed
	// to a multicast address since this host was added to the hostTimeTable. Note
	// that this number does not include packets directed to the broadcast
	// address. The type is interface{} with range: 0..4294967295. Units are
	// Packets.
	HostTimeOutMulticastPkts interface{}
}

RMONMIB_HostTimeTable_HostTimeEntry A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object. For example, an instance of the hostTimeOutBroadcastPkts object might be named hostTimeOutBroadcastPkts.1.687

func (*RMONMIB_HostTimeTable_HostTimeEntry) GetEntityData 

func (hostTimeEntry *RMONMIB_HostTimeTable_HostTimeEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTopNControlTable 

type RMONMIB_HostTopNControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of parameters that control the creation of a report of the top N
	// hosts according to several metrics.  For example, an instance of the
	// hostTopNDuration object might be named hostTopNDuration.3. The type is
	// slice of RMONMIB_HostTopNControlTable_HostTopNControlEntry.
	HostTopNControlEntry []*RMONMIB_HostTopNControlTable_HostTopNControlEntry
}

RMONMIB_HostTopNControlTable A list of top N host control entries.

func (*RMONMIB_HostTopNControlTable) GetEntityData 

func (hostTopNControlTable *RMONMIB_HostTopNControlTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTopNControlTable_HostTopNControlEntry 

type RMONMIB_HostTopNControlTable_HostTopNControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hostTopNControl table.  Each such entry defines one top N report prepared
	// for one interface. The type is interface{} with range: 1..65535.
	HostTopNControlIndex interface{}

	// The host table for which a top N report will be prepared on behalf of this
	// entry.  The host table identified by a particular value of this index is
	// associated with the same host table as identified by the same value of
	// hostIndex.  This object may not be modified if the associated
	// hostTopNStatus object is equal to valid(1). The type is interface{} with
	// range: 1..65535.
	HostTopNHostIndex interface{}

	// The variable for each host that the hostTopNRate variable is based upon.
	// This object may not be modified if the associated hostTopNStatus object is
	// equal to valid(1). The type is HostTopNRateBase.
	HostTopNRateBase interface{}

	// The number of seconds left in the report currently being collected.  When
	// this object is modified by the management station, a new collection is
	// started, possibly aborting a currently running report.  The new value is
	// used as the requested duration of this report, which is loaded into the
	// associated hostTopNDuration object.  When this object is set to a non-zero
	// value, any associated hostTopNEntries shall be made inaccessible by the
	// monitor.  While the value of this object is non-zero, it decrements by one
	// per second until it reaches zero.  During this time, all associated
	// hostTopNEntries shall remain inaccessible.  At the time that this object
	// decrements to zero, the report is made accessible in the hostTopNTable.
	// Thus, the hostTopN table needs to be created only at the end of the
	// collection interval. The type is interface{} with range:
	// -2147483648..2147483647. Units are Seconds.
	HostTopNTimeRemaining interface{}

	// The number of seconds that this report has collected during the last
	// sampling interval, or if this report is currently being collected, the
	// number of seconds that this report is being collected during this sampling
	// interval.  When the associated hostTopNTimeRemaining object is set, this
	// object shall be set by the probe to the same value and shall not be
	// modified until the next time the hostTopNTimeRemaining is set.  This value
	// shall be zero if no reports have been requested for this
	// hostTopNControlEntry. The type is interface{} with range:
	// -2147483648..2147483647. Units are Seconds.
	HostTopNDuration interface{}

	// The maximum number of hosts requested for the top N table.  When this
	// object is created or modified, the probe should set hostTopNGrantedSize as
	// closely to this object as is possible for the particular probe
	// implementation and available resources. The type is interface{} with range:
	// -2147483648..2147483647.
	HostTopNRequestedSize interface{}

	// The maximum number of hosts in the top N table.  When the associated
	// hostTopNRequestedSize object is created or modified, the probe should set
	// this object as closely to the requested value as is possible for the
	// particular implementation and available resources. The probe must not lower
	// this value except as a result of a set to the associated
	// hostTopNRequestedSize object.  Hosts with the highest value of hostTopNRate
	// shall be placed in this table in decreasing order of this rate until there
	// is no more room or until there are no more hosts. The type is interface{}
	// with range: -2147483648..2147483647.
	HostTopNGrantedSize interface{}

	// The value of sysUpTime when this top N report was last started.  In other
	// words, this is the time that the associated hostTopNTimeRemaining object
	// was modified to start the requested report. The type is interface{} with
	// range: 0..4294967295.
	HostTopNStartTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	HostTopNOwner interface{}

	// The status of this hostTopNControl entry.  If this object is not equal to
	// valid(1), all associated hostTopNEntries shall be deleted by the agent. The
	// type is EntryStatus.
	HostTopNStatus interface{}
}

RMONMIB_HostTopNControlTable_HostTopNControlEntry A set of parameters that control the creation of a report of the top N hosts according to several metrics. For example, an instance of the hostTopNDuration object might be named hostTopNDuration.3

func (*RMONMIB_HostTopNControlTable_HostTopNControlEntry) GetEntityData 

func (hostTopNControlEntry *RMONMIB_HostTopNControlTable_HostTopNControlEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase 

type RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase string

RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase represents hostTopNStatus object is equal to valid(1). 

const (
	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNInPkts RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNInPkts"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNOutPkts RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNOutPkts"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNInOctets RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNInOctets"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNOutOctets RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNOutOctets"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNOutErrors RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNOutErrors"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNOutBroadcastPkts RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNOutBroadcastPkts"

	RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase_hostTopNOutMulticastPkts RMONMIB_HostTopNControlTable_HostTopNControlEntry_HostTopNRateBase = "hostTopNOutMulticastPkts"
)

type RMONMIB_HostTopNTable 

type RMONMIB_HostTopNTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of statistics for a host that is part of a top N report.  For
	// example, an instance of the hostTopNRate object might be named
	// hostTopNRate.3.10. The type is slice of
	// RMONMIB_HostTopNTable_HostTopNEntry.
	HostTopNEntry []*RMONMIB_HostTopNTable_HostTopNEntry
}

RMONMIB_HostTopNTable A list of top N host entries.

func (*RMONMIB_HostTopNTable) GetEntityData 

func (hostTopNTable *RMONMIB_HostTopNTable) GetEntityData() *types.CommonEntityData

type RMONMIB_HostTopNTable_HostTopNEntry 

type RMONMIB_HostTopNTable_HostTopNEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This object identifies the top N report of which
	// this entry is a part.  The set of hosts identified by a particular value of
	// this object is part of the same report as identified by the same value of
	// the hostTopNControlIndex object. The type is interface{} with range:
	// 1..65535.
	HostTopNReport interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hostTopN table among those in the same report. This index is between 1 and
	// N, where N is the number of entries in this table.  Increasing values of
	// hostTopNIndex shall be assigned to entries with decreasing values of
	// hostTopNRate until index N is assigned to the entry with the lowest value
	// of hostTopNRate or there are no more hostTopNEntries. The type is
	// interface{} with range: 1..65535.
	HostTopNIndex interface{}

	// The physical address of this host. The type is string.
	HostTopNAddress interface{}

	// The amount of change in the selected variable during this sampling
	// interval.  The selected variable is this host's instance of the object
	// selected by hostTopNRateBase. The type is interface{} with range:
	// -2147483648..2147483647.
	HostTopNRate interface{}
}

RMONMIB_HostTopNTable_HostTopNEntry A set of statistics for a host that is part of a top N report. For example, an instance of the hostTopNRate object might be named hostTopNRate.3.10

func (*RMONMIB_HostTopNTable_HostTopNEntry) GetEntityData 

func (hostTopNEntry *RMONMIB_HostTopNTable_HostTopNEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_LogTable 

type RMONMIB_LogTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of data describing an event that has been logged.  For example, an
	// instance of the logDescription object might be named logDescription.6.47.
	// The type is slice of RMONMIB_LogTable_LogEntry.
	LogEntry []*RMONMIB_LogTable_LogEntry
}

RMONMIB_LogTable A list of events that have been logged.

func (*RMONMIB_LogTable) GetEntityData 

func (logTable *RMONMIB_LogTable) GetEntityData() *types.CommonEntityData

type RMONMIB_LogTable_LogEntry 

type RMONMIB_LogTable_LogEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The event entry that generated this log entry.
	// The log identified by a particular value of this index is associated with
	// the same eventEntry as identified by the same value of eventIndex. The type
	// is interface{} with range: 1..65535.
	LogEventIndex interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// log table amongst those generated by the same eventEntries.  These indexes
	// are assigned beginning with 1 and increase by one with each new log entry.
	// The association between values of logIndex and logEntries is fixed for the
	// lifetime of each logEntry. The agent may choose to delete the oldest
	// instances of logEntry as required because of lack of memory.  It is an
	// implementation-specific matter as to when this deletion may occur. The type
	// is interface{} with range: 1..2147483647.
	LogIndex interface{}

	// The value of sysUpTime when this log entry was created. The type is
	// interface{} with range: 0..4294967295.
	LogTime interface{}

	// An implementation dependent description of the event that activated this
	// log entry. The type is string with length: 0..255.
	LogDescription interface{}
}

RMONMIB_LogTable_LogEntry A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47

func (*RMONMIB_LogTable_LogEntry) GetEntityData 

func (logEntry *RMONMIB_LogTable_LogEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixControlTable 

type RMONMIB_MatrixControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a traffic matrix on a particular interface.  For example,
	// an instance of the matrixControlLastDeleteTime object might be named
	// matrixControlLastDeleteTime.1. The type is slice of
	// RMONMIB_MatrixControlTable_MatrixControlEntry.
	MatrixControlEntry []*RMONMIB_MatrixControlTable_MatrixControlEntry
}

RMONMIB_MatrixControlTable A list of information entries for the traffic matrix on each interface.

func (*RMONMIB_MatrixControlTable) GetEntityData 

func (matrixControlTable *RMONMIB_MatrixControlTable) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixControlTable_MatrixControlEntry 

type RMONMIB_MatrixControlTable_MatrixControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// matrixControl table.  Each such entry defines a function that discovers
	// conversations on a particular interface and places statistics about them in
	// the matrixSDTable and the matrixDSTable on behalf of this
	// matrixControlEntry. The type is interface{} with range: 1..65535.
	MatrixControlIndex interface{}

	// This object identifies the source of the data from which this entry creates
	// a traffic matrix. This source can be any interface on this device.  In
	// order to identify a particular interface, this object shall identify the
	// instance of the ifIndex object, defined in RFC 2233 [17], for the desired
	// interface.  For example, if an entry were to receive data from interface
	// #1, this object would be set to ifIndex.1.  The statistics in this group
	// reflect all packets on the local network segment attached to the identified
	// interface.  An agent may or may not be able to tell if fundamental changes
	// to the media of the interface have occurred and necessitate an invalidation
	// of this entry.  For example, a hot-pluggable ethernet card could be pulled
	// out and replaced by a token-ring card.  In such a case, if the agent has
	// such knowledge of the change, it is recommended that it invalidate this
	// entry.  This object may not be modified if the associated
	// matrixControlStatus object is equal to valid(1). The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	MatrixControlDataSource interface{}

	// The number of matrixSDEntries in the matrixSDTable for this interface.
	// This must also be the value of the number of entries in the matrixDSTable
	// for this interface. The type is interface{} with range:
	// -2147483648..2147483647.
	MatrixControlTableSize interface{}

	// The value of sysUpTime when the last entry was deleted from the portion of
	// the matrixSDTable or matrixDSTable associated with this matrixControlEntry.
	// If no deletions have occurred, this value shall be zero. The type is
	// interface{} with range: 0..4294967295.
	MatrixControlLastDeleteTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	MatrixControlOwner interface{}

	// The status of this matrixControl entry. If this object is not equal to
	// valid(1), all associated entries in the matrixSDTable and the matrixDSTable
	// shall be deleted by the agent. The type is EntryStatus.
	MatrixControlStatus interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted      because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	MatrixControlDroppedFrames interface{}

	// The value of sysUpTime when this control entry was last activated. This can
	// be used by the management station to ensure that the table has not been
	// deleted and recreated between polls. The type is interface{} with range:
	// 0..4294967295.
	MatrixControlCreateTime interface{}
}

RMONMIB_MatrixControlTable_MatrixControlEntry Information about a traffic matrix on a particular interface. For example, an instance of the matrixControlLastDeleteTime object might be named matrixControlLastDeleteTime.1

func (*RMONMIB_MatrixControlTable_MatrixControlEntry) GetEntityData 

func (matrixControlEntry *RMONMIB_MatrixControlTable_MatrixControlEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixDSTable 

type RMONMIB_MatrixDSTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A collection of statistics for communications between two addresses on a
	// particular interface.  For example, an instance of the matrixSDPkts object
	// might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176. The type
	// is slice of RMONMIB_MatrixDSTable_MatrixDSEntry.
	MatrixDSEntry []*RMONMIB_MatrixDSTable_MatrixDSEntry
}

RMONMIB_MatrixDSTable A list of traffic matrix entries indexed by destination and source MAC address.

func (*RMONMIB_MatrixDSTable) GetEntityData 

func (matrixDSTable *RMONMIB_MatrixDSTable) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixDSTable_MatrixDSEntry 

type RMONMIB_MatrixDSTable_MatrixDSEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The set of collected matrix statistics of which
	// this entry is a part.  The set of matrix statistics identified by a
	// particular value of this index is associated with the same
	// matrixControlEntry as identified by the same value of matrixControlIndex.
	// The type is interface{} with range: 1..65535.
	MatrixDSIndex interface{}

	// This attribute is a key. The destination physical address. The type is
	// string.
	MatrixDSDestAddress interface{}

	// This attribute is a key. The source physical address. The type is string.
	MatrixDSSourceAddress interface{}

	// The number of packets transmitted from the source address to the
	// destination address (this number includes bad packets). The type is
	// interface{} with range: 0..4294967295. Units are Packets.
	MatrixDSPkts interface{}

	// The number of octets (excluding framing bits but including FCS octets)
	// contained in all packets transmitted from the source address to the
	// destination address. The type is interface{} with range: 0..4294967295.
	// Units are Octets.
	MatrixDSOctets interface{}

	// The number of bad packets transmitted from the source address to the
	// destination address. The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	MatrixDSErrors interface{}
}

RMONMIB_MatrixDSTable_MatrixDSEntry A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176

func (*RMONMIB_MatrixDSTable_MatrixDSEntry) GetEntityData 

func (matrixDSEntry *RMONMIB_MatrixDSTable_MatrixDSEntry) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixSDTable 

type RMONMIB_MatrixSDTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A collection of statistics for communications between two addresses on a
	// particular interface.  For example, an instance of the matrixSDPkts object
	// might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113. The type
	// is slice of RMONMIB_MatrixSDTable_MatrixSDEntry.
	MatrixSDEntry []*RMONMIB_MatrixSDTable_MatrixSDEntry
}

RMONMIB_MatrixSDTable A list of traffic matrix entries indexed by source and destination MAC address.

func (*RMONMIB_MatrixSDTable) GetEntityData 

func (matrixSDTable *RMONMIB_MatrixSDTable) GetEntityData() *types.CommonEntityData

type RMONMIB_MatrixSDTable_MatrixSDEntry 

type RMONMIB_MatrixSDTable_MatrixSDEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The set of collected matrix statistics of which
	// this entry is a part.  The set of matrix statistics identified by a
	// particular value of this index is associated with the same
	// matrixControlEntry as identified by the same value of matrixControlIndex.
	// The type is interface{} with range: 1..65535.
	MatrixSDIndex interface{}

	// This attribute is a key. The source physical address. The type is string.
	MatrixSDSourceAddress interface{}

	// This attribute is a key. The destination physical address. The type is
	// string.
	MatrixSDDestAddress interface{}

	// The number of packets transmitted from the source address to the
	// destination address (this number includes bad packets). The type is
	// interface{} with range: 0..4294967295. Units are Packets.
	MatrixSDPkts interface{}

	// The number of octets (excluding framing bits but including FCS octets)
	// contained in all packets transmitted from the source address to the
	// destination address. The type is interface{} with range: 0..4294967295.
	// Units are Octets.
	MatrixSDOctets interface{}

	// The number of bad packets transmitted from the source address to the
	// destination address. The type is interface{} with range: 0..4294967295.
	// Units are Packets.
	MatrixSDErrors interface{}
}

RMONMIB_MatrixSDTable_MatrixSDEntry A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113

func (*RMONMIB_MatrixSDTable_MatrixSDEntry) GetEntityData 

func (matrixSDEntry *RMONMIB_MatrixSDTable_MatrixSDEntry) GetEntityData() *types.CommonEntityData

type RmonEventsV2 

type RmonEventsV2 struct {
}

func (RmonEventsV2) String 

func (id RmonEventsV2) String() string

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.