ntp_oper

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This module contains a collection of YANG definitions for NTP operational data. Copyright (c) 2017-2018 by Cisco Systems, Inc. All rights reserved.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type KissCodeType 

type KissCodeType string

KissCodeType represents Kiss code is used for debug or maintenance purposes in devices in stratum 0 or 16 

const (
	// The association belongs to a unicast server
	KissCodeType_ntp_ref_acst KissCodeType = "ntp-ref-acst"

	// Server authentication failed
	KissCodeType_ntp_ref_auth KissCodeType = "ntp-ref-auth"

	// Autokey sequence failed
	KissCodeType_ntp_ref_auto KissCodeType = "ntp-ref-auto"

	// The association belongs to a broadcast server
	KissCodeType_ntp_ref_bcst KissCodeType = "ntp-ref-bcst"

	// Cryptographic authentication or identification failed
	KissCodeType_ntp_ref_cryp KissCodeType = "ntp-ref-cryp"

	// Access denied by remote server
	KissCodeType_ntp_ref_deny KissCodeType = "ntp-ref-deny"

	// Lost peer in symmetric mode
	KissCodeType_ntp_ref_drop KissCodeType = "ntp-ref-drop"

	// Access denied due to local policy
	KissCodeType_ntp_ref_rstr KissCodeType = "ntp-ref-rstr"

	// The association has not synchronized for the first time
	KissCodeType_ntp_ref_init KissCodeType = "ntp-ref-init"

	// The association belongs to a dynamically discovered server
	KissCodeType_ntp_ref_mcst KissCodeType = "ntp-ref-mcst"

	// No key found. Either the key was never installed or not trusted
	KissCodeType_ntp_ref_nkey KissCodeType = "ntp-ref-nkey"

	// The server has temporarily denied access because
	// the client exceeded the rate threshold
	KissCodeType_ntp_ref_rate KissCodeType = "ntp-ref-rate"

	// Alteration of association from a remote host running ntpdc
	KissCodeType_ntp_ref_rmot KissCodeType = "ntp-ref-rmot"

	// STEP means the offset is less than the panic threshold but greater than the step threshold of 125 ms
	KissCodeType_ntp_ref_step KissCodeType = "ntp-ref-step"
)

type NtpOperData 

type NtpOperData struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Contains ntp status info for the queried switch or router  which includes
	// reference identifier, reference time, stratum  delay and other details.
	NtpStatusInfo NtpOperData_NtpStatusInfo
}

NtpOperData NTP operational data

func (*NtpOperData) GetEntityData 

func (ntpOperData *NtpOperData) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo 

type NtpOperData_NtpStatusInfo struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YPresence  bool

	// Unix calendar time. The type is string with pattern:
	// \d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?(Z|[\+\-]\d{2}:\d{2}).
	Reftime interface{}

	// Frequency or periodicity of NTP polling in seconds expressed as a power of
	// two as per model and rfc. The type is interface{} with range: 0..255.
	SysPoll interface{}

	// How far away the current switch is in term of hops  from the primary time
	// source of the subnet or from the root of the subnet. The type is
	// interface{} with range: 0..4294967295.
	Stratum interface{}

	// Round trip delay with respect to the primary time server. The type is
	// string with range: -92233720368547758.08..92233720368547758.07.
	RootDelay interface{}

	// Deviation of offset with respect to time. All measurements are between the
	// current switch and the root of the subnet. The type is string with range:
	// -92233720368547758.08..92233720368547758.07.
	RootDisp interface{}

	// Difference in time between current switch and peer and server clock. The
	// type is string with range: -92233720368547758.08..92233720368547758.07.
	Offset interface{}

	// The second derivative of offset with time. In NTP version 4, this is always
	// 0. The type is string with range:
	// -92233720368547758.08..92233720368547758.07.
	FreqDriftPpm interface{}

	// Reference id can either be a KOD code or a clock source or an IP address.
	Refid NtpOperData_NtpStatusInfo_Refid

	// Table of NTP associations with servers and peers. The type is slice of
	// NtpOperData_NtpStatusInfo_NtpAssociations.
	NtpAssociations []*NtpOperData_NtpStatusInfo_NtpAssociations
}

NtpOperData_NtpStatusInfo Contains ntp status info for the queried switch or router which includes reference identifier, reference time, stratum delay and other details This type is a presence type.

func (*NtpOperData_NtpStatusInfo) GetEntityData 

func (ntpStatusInfo *NtpOperData_NtpStatusInfo) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_NtpAssociations 

type NtpOperData_NtpStatusInfo_NtpAssociations struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Association id is a descriptor which describes the
	// association between two NTP entities whether client and peer or client and
	// server. The type is interface{} with range: 0..65535.
	AssocId interface{}

	// The status of the last 8 NTP packet exchanges with peers. 1 is encoded in
	// the bitmask for a successful attempt and 0 is encoded for failure. If all
	// the last 8 transactions with peers or messages sent to peers are successful
	// the encoding becomes 0xff. The type is interface{} with range: 0..255.
	PeerReach interface{}

	// Stratum in which the peer exists. The type is interface{} with range:
	// 0..4294967295.
	PeerStratum interface{}

	// Reference UNIX calendar time. The type is string with pattern:
	// \d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?(Z|[\+\-]\d{2}:\d{2}).
	Reftime interface{}

	// The time of  the last NTP poll or update that happened in seconds. How many
	// seconds back did the last update happen or when did the last NTP update
	// happen ?. The type is interface{} with range: 0..18446744073709551615.
	LastPollTime interface{}

	// Maximum poll time of NTP in seconds expressed as a power of two as per
	// model and RFC. The type is interface{} with range: 0..4294967295.
	Poll interface{}

	// Round trip delay of reaching the peer and returning. The type is string
	// with range: -92233720368547758.08..92233720368547758.07.
	Delay interface{}

	// Difference in ms between server time and local time. offset with respect to
	// the peer/server clock. The type is string with range:
	// -92233720368547758.08..92233720368547758.07.
	Offset interface{}

	// Jitter in ms refers to short-term variations in frequency of components
	// greater than 10 hz. The type is string with range:
	// -92233720368547758.08..92233720368547758.07.
	Jitter interface{}

	// Count of number of error events received from peer. The type is interface{}
	// with range: 0..255.
	NumEvents interface{}

	// Last event received from peer. The type is PeerEvent.
	LastPeerEvent interface{}

	// Status of peer selection based on the NTP selection  algorithm. The type is
	// PeerSelectStatus.
	PeerSelectionStatus interface{}

	// Status of authentication of switch or router by peer. The type is
	// PeerAuthStatus.
	PeerAuthenticationStatus interface{}

	// Whether the remote NTP device is a server or peer. The type is ServerType.
	ServType interface{}

	// Peer status word of ntp server or peer when authentication configured. The
	// type is PeerStatusWord.
	PswCrypto interface{}

	// refid refers to either an IP address or a clock source or KOD type code.
	Refid NtpOperData_NtpStatusInfo_NtpAssociations_Refid

	// NTP address consists of an IP address and a VRF name.
	NtpAddress NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress
}

NtpOperData_NtpStatusInfo_NtpAssociations Table of NTP associations with servers and peers

func (*NtpOperData_NtpStatusInfo_NtpAssociations) GetEntityData 

func (ntpAssociations *NtpOperData_NtpStatusInfo_NtpAssociations) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress 

type NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// IP address is the IP address of  the NTP server or peer. The type is one of
	// the following types: string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?,
	// or string with pattern:
	// ((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?.
	IpAddr interface{}

	// VRF name is the virtual routing instance through which we can find the ntp
	// server or peer. The type is string.
	VrfName interface{}
}

NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress NTP address consists of an IP address and a VRF name

func (*NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress) GetEntityData 

func (ntpAddress *NtpOperData_NtpStatusInfo_NtpAssociations_NtpAddress) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid 

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// IPV4 or IPV6 ip address. The type is one of the following types: string
	// with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?,
	// or string with pattern:
	// ((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?.
	IpAddr interface{}

	// Bad stat or exception code in case the 3 criteria of ip, clock and kod
	// don't match. The type is interface{} with range: 0..4294967295.
	ExceptionCode interface{}

	// Container for KOD type eg INIT ACTS.
	KodData NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData

	// Container for clock data. GPS is the only source supported by Cisco
	// currrently.
	RefClkSrcData NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData
}

NtpOperData_NtpStatusInfo_NtpAssociations_Refid refid refers to either an IP address or a clock source or KOD type code

func (*NtpOperData_NtpStatusInfo_NtpAssociations_Refid) GetEntityData 

func (refid *NtpOperData_NtpStatusInfo_NtpAssociations_Refid) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData 

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// KOD types could be any of  the enums including INIT   ACTS etc. The type is
	// KissCodeType.
	KodType interface{}
}

NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData Container for KOD type eg INIT ACTS

func (*NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData) GetEntityData 

func (kodData *NtpOperData_NtpStatusInfo_NtpAssociations_Refid_KodData) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData 

type NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Contains clock source type specifics eg GPS and container extensions. The
	// type is RefClockSourceType.
	RefClkSrcType interface{}
}

NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData Container for clock data. GPS is the only source supported by Cisco currrently

func (*NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData) GetEntityData 

func (refClkSrcData *NtpOperData_NtpStatusInfo_NtpAssociations_Refid_RefClkSrcData) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_Refid 

type NtpOperData_NtpStatusInfo_Refid struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// IPV4 or IPV6 ip address. The type is one of the following types: string
	// with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?,
	// or string with pattern:
	// ((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))(%[\p{N}\p{L}]+)?.
	IpAddr interface{}

	// Bad stat or exception code in case the 3 criteria of ip, clock and kod
	// don't match. The type is interface{} with range: 0..4294967295.
	ExceptionCode interface{}

	// Container for KOD type eg INIT ACTS.
	KodData NtpOperData_NtpStatusInfo_Refid_KodData

	// Container for clock data. GPS is the only source supported by Cisco
	// currrently.
	RefClkSrcData NtpOperData_NtpStatusInfo_Refid_RefClkSrcData
}

NtpOperData_NtpStatusInfo_Refid Reference id can either be a KOD code or a clock source or an IP address

func (*NtpOperData_NtpStatusInfo_Refid) GetEntityData 

func (refid *NtpOperData_NtpStatusInfo_Refid) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_Refid_KodData 

type NtpOperData_NtpStatusInfo_Refid_KodData struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// KOD types could be any of  the enums including INIT   ACTS etc. The type is
	// KissCodeType.
	KodType interface{}
}

NtpOperData_NtpStatusInfo_Refid_KodData Container for KOD type eg INIT ACTS

func (*NtpOperData_NtpStatusInfo_Refid_KodData) GetEntityData 

func (kodData *NtpOperData_NtpStatusInfo_Refid_KodData) GetEntityData() *types.CommonEntityData

type NtpOperData_NtpStatusInfo_Refid_RefClkSrcData 

type NtpOperData_NtpStatusInfo_Refid_RefClkSrcData struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Contains clock source type specifics eg GPS and container extensions. The
	// type is RefClockSourceType.
	RefClkSrcType interface{}
}

NtpOperData_NtpStatusInfo_Refid_RefClkSrcData Container for clock data. GPS is the only source supported by Cisco currrently

func (*NtpOperData_NtpStatusInfo_Refid_RefClkSrcData) GetEntityData 

func (refClkSrcData *NtpOperData_NtpStatusInfo_Refid_RefClkSrcData) GetEntityData() *types.CommonEntityData

type PeerAuthStatus 

type PeerAuthStatus string

PeerAuthStatus represents Status of authenticating switch with peer or server 

const (
	// The NTP client or server packet has MAC
	// field and authentication succeded
	PeerAuthStatus_ntp_auth_ok PeerAuthStatus = "ntp-auth-ok"

	// The NTP client or server packet has MAC
	// and decryption failed with AUTH_ERROR
	PeerAuthStatus_ntp_auth_bad_auth PeerAuthStatus = "ntp-auth-bad-auth"

	// The NTP client or server is not configured with authenication
	// with server or client
	PeerAuthStatus_ntp_auth_auth_not_configured PeerAuthStatus = "ntp-auth-auth-not-configured"

	// The NTP client or server authentication stautus is not available
	//  as now
	PeerAuthStatus_ntp_auth_status_not_available PeerAuthStatus = "ntp-auth-status-not-available"

	// The NTP client or server packet has no MAC
	// with server or peer
	PeerAuthStatus_ntp_auth_none PeerAuthStatus = "ntp-auth-none"

	// crypto-NAK. The MAC has four octets only and could not
	// determine authentication status with peer
	PeerAuthStatus_ntp_auth_crypto PeerAuthStatus = "ntp-auth-crypto"
)

type PeerEvent 

type PeerEvent string

PeerEvent represents Event received by switch or router and sent by peer 

const (
	// This event is used to allocate resources and
	// initialize defaults or values when a NTP association is setup
	PeerEvent_ntp_peer_event_mobilize PeerEvent = "ntp-peer-event-mobilize"

	// This event is used to tear down the resources
	// associated with a NTP association
	PeerEvent_ntp_peer_event_demobilize PeerEvent = "ntp-peer-event-demobilize"

	// This event indicates that the NTP peer is
	// unreachable
	PeerEvent_ntp_peer_event_unreachable PeerEvent = "ntp-peer-event-unreachable"

	// This event indicates that the peer is reachable
	PeerEvent_ntp_peer_event_reachable PeerEvent = "ntp-peer-event-reachable"

	// Event to indicate that the NTP process restart
	// is now complete
	PeerEvent_ntp_peer_event_restart PeerEvent = "ntp-peer-event-restart"

	// NTP peer or server reply event in response to a
	// get time request from the client
	PeerEvent_ntp_peer_event_reply PeerEvent = "ntp-peer-event-reply"

	// This event is used to synchronize the client
	// and peer or server through a flow contol mechanism
	PeerEvent_ntp_peer_event_rate PeerEvent = "ntp-peer-event-rate"

	// Event from peer that indicates denial of access to the
	// switch or router
	PeerEvent_ntp_peer_event_deny PeerEvent = "ntp-peer-event-deny"

	// This event clears or resets the NTP flag after the
	// leap second event so that the system is now ready to receive the next
	// leap second event
	PeerEvent_ntp_peer_disarmed PeerEvent = "ntp-peer-disarmed"

	// Peer event armed means that the event for delaying
	// the clock increment by one second for a leap year will be scheduled
	// next month
	PeerEvent_ntp_peer_armed PeerEvent = "ntp-peer-armed"

	// New peer added to association
	PeerEvent_ntp_peer_event_newpeer PeerEvent = "ntp-peer-event-newpeer"

	// This event indicates clock tick errors
	PeerEvent_ntp_peer_event_clock PeerEvent = "ntp-peer-event-clock"

	// Event indicating status of authenticating switch
	// or router with peer
	PeerEvent_ntp_peer_event_auth PeerEvent = "ntp-peer-event-auth"

	// Popcorn event indicates a delayed NTP packet due
	// to congestion in the network
	PeerEvent_ntp_peer_event_popcorn PeerEvent = "ntp-peer-event-popcorn"

	// Event for NTP peer or server leaving the
	// association
	PeerEvent_ntp_peer_event_xleave PeerEvent = "ntp-peer-event-xleave"

	// NTP event for an error message received from
	// peer or server
	PeerEvent_ntp_peer_event_xerr PeerEvent = "ntp-peer-event-xerr"

	// Event for incorporating correction for
	// International Atomic Time based on offsets from UTC
	PeerEvent_ntp_peer_event_tai PeerEvent = "ntp-peer-event-tai"
)

type PeerSelectStatus 

type PeerSelectStatus string

PeerSelectStatus represents Selection status of peer 

const (
	// The peer is a survivor but not among the first
	// six peers
	PeerSelectStatus_ntp_peer_as_backup PeerSelectStatus = "ntp-peer-as-backup"

	// The peer was rejected due to a loop or due
	// to becoming unreachable or due to bad synchronization distance
	PeerSelectStatus_ntp_peer_rejected PeerSelectStatus = "ntp-peer-rejected"

	// The peer or server is discarded due to false tick
	// or clock errors
	PeerSelectStatus_ntp_peer_false_ticker PeerSelectStatus = "ntp-peer-false-ticker"

	// The peer is discarded as it is not among the
	// first ten peers sorted by synchronization distance
	PeerSelectStatus_ntp_peer_excess PeerSelectStatus = "ntp-peer-excess"

	// NTP server or peer rejected as outlier
	PeerSelectStatus_ntp_peer_outlier PeerSelectStatus = "ntp-peer-outlier"

	// Possible candidate for selection as time server
	PeerSelectStatus_ntp_peer_candidate PeerSelectStatus = "ntp-peer-candidate"

	// Peer or server selected as time server
	PeerSelectStatus_ntp_peer_sys_peer PeerSelectStatus = "ntp-peer-sys-peer"

	// Peer or server selected as time server. In this
	// case the Pulse Per Second signal is used to synchronize the client and
	// server or peer
	PeerSelectStatus_ntp_peer_pps_peer PeerSelectStatus = "ntp-peer-pps-peer"
)

type PeerStatusWord 

type PeerStatusWord string

PeerStatusWord represents Peer status word or crypto of ntp server or ntp peer 

const (
	// In autokey[public key ntp authentication protocol ], this flag is
	// set when host certificate is signed by server.This is not implemented/supported as of now
	PeerStatusWord_crypto_flag_sig PeerStatusWord = "crypto-flag-sig"

	// In autokey, this flag is set when leap second values
	// are received and validated
	PeerStatusWord_crypto_flag_leap PeerStatusWord = "crypto-flag-leap"

	// In autokey,this flag is set when the trusted host identity
	// credentials are  confirmed
	PeerStatusWord_crypto_flag_vrfy PeerStatusWord = "crypto-flag-vrfy"

	// In autokey, this flag is set when the cookie is received  and validated
	// when set, keylists with  nonzero cookies are generated,
	// when reset cookie is zero
	PeerStatusWord_crypto_flag_cook PeerStatusWord = "crypto-flag-cook"

	// In autokey, this flag is set when autokey values are received and validated,
	// when set client can validate packets without extension field
	// according to the autokey sequence
	PeerStatusWord_crypto_flag_auto PeerStatusWord = "crypto-flag-auto"

	// In autokey, this flag is set when trusted host certificate and public key are verified
	PeerStatusWord_crypto_flag_cert PeerStatusWord = "crypto-flag-cert"
)

type RefClockSourceType 

type RefClockSourceType string

RefClockSourceType represents Clock source type for NTP 

const (
	// Geosynchronous Orbit Environment Satellite
	RefClockSourceType_ntp_ref_goes RefClockSourceType = "ntp-ref-goes"

	// Global Position System
	RefClockSourceType_ntp_ref_gps RefClockSourceType = "ntp-ref-gps"

	// Galileo Positioning System
	RefClockSourceType_ntp_ref_gal RefClockSourceType = "ntp-ref-gal"

	// Generic pulse-per-second
	RefClockSourceType_ntp_ref_pps RefClockSourceType = "ntp-ref-pps"

	// Inter-Range Instrumentation Group
	RefClockSourceType_ntp_ref_irig RefClockSourceType = "ntp-ref-irig"

	// LF Radio WWVB Ft. Collins
	RefClockSourceType_ntp_ref_wwvb RefClockSourceType = "ntp-ref-wwvb"

	// LF Radio DCF77 Mainflingen
	RefClockSourceType_ntp_ref_dcf RefClockSourceType = "ntp-ref-dcf"

	// LF Radio HBG Prangins
	RefClockSourceType_ntp_ref_hbg RefClockSourceType = "ntp-ref-hbg"

	// LF Radio MSF Anthorn
	RefClockSourceType_ntp_ref_msf RefClockSourceType = "ntp-ref-msf"

	// LF Radio JJY Fukushima
	RefClockSourceType_ntp_ref_jjy RefClockSourceType = "ntp-ref-jjy"

	// MF Radio LORAN C station
	RefClockSourceType_ntp_ref_lorc RefClockSourceType = "ntp-ref-lorc"

	// MF Radio Allouis
	RefClockSourceType_ntp_ref_tdf RefClockSourceType = "ntp-ref-tdf"

	// HF Radio CHU Ottawa
	RefClockSourceType_ntp_ref_chu RefClockSourceType = "ntp-ref-chu"

	// HF Radio WWV Ft. Collins
	RefClockSourceType_ntp_ref_wwv RefClockSourceType = "ntp-ref-wwv"

	// HF Radio WWVH Kauai
	RefClockSourceType_ntp_ref_wwvh RefClockSourceType = "ntp-ref-wwvh"

	// NIST telephone modem
	RefClockSourceType_ntp_ref_nist RefClockSourceType = "ntp-ref-nist"

	// NIST telephone modem
	RefClockSourceType_ntp_ref_acts RefClockSourceType = "ntp-ref-acts"

	// USNO telephone modem
	RefClockSourceType_ntp_ref_usno RefClockSourceType = "ntp-ref-usno"

	// European telephone modem
	RefClockSourceType_ntp_ref_ptb RefClockSourceType = "ntp-ref-ptb"
)

type RefidPktTypeInfo 

type RefidPktTypeInfo string

RefidPktTypeInfo represents The type of information stored in the refid 

const (
	// Kiss of Death code or KOD contains debug or maintenance code. Refid is set to these codes in stratums 0 and 16 (unspec,invalid, unsync)
	RefidPktTypeInfo_ntp_ref_state_kod RefidPktTypeInfo = "ntp-ref-state-kod"

	// CLK Source type occurs for all primary time servers in stratum 1
	RefidPktTypeInfo_ntp_ref_state_resolved_with_clk_source RefidPktTypeInfo = "ntp-ref-state-resolved-with-clk-source"

	// IP address occurs for clients in stratums >= 2 and  <=15
	RefidPktTypeInfo_ntp_ref_state_resolved_with_ip_addr RefidPktTypeInfo = "ntp-ref-state-resolved-with-ip-addr"

	// Bad state which serves as a default criterion for  a complete mismatch with all cases
	RefidPktTypeInfo_ntp_ref_state_bad_state RefidPktTypeInfo = "ntp-ref-state-bad-state"
)

type ServerType 

type ServerType string

ServerType represents Status of remote entity whether server or peer 

const (
	// Remote entity is a NTP peer
	ServerType_ntp_peer ServerType = "ntp-peer"

	// Remote NTP is a NTP server
	ServerType_ntp_server ServerType = "ntp-server"

	// Status of remote entity could not be found
	ServerType_ntp_unknown_type ServerType = "ntp-unknown-type"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.