cisco_flash_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This MIB provides for the management of Cisco Flash Devices.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOFLASHMIB 

type CISCOFLASHMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	CiscoFlashDevice CISCOFLASHMIB_CiscoFlashDevice

	CiscoFlashCfg CISCOFLASHMIB_CiscoFlashCfg

	// Table of Flash device properties for each initialized Flash device. Each
	// Flash device installed in a system is detected, sized, and initialized when
	// the system image boots up. For removable Flash devices, the device
	// properties will be dynamically deleted and recreated as the device is
	// removed and inserted. Note that in this case, the newly inserted device may
	// not be the same as the earlier removed one. The ciscoFlashDeviceInitTime
	// object is available for a management station to determine the time at which
	// a device was initialized, and thereby detect the change of a removable
	// device. A removable device that has not been installed will also have an
	// entry in this table. This is to let a management station know about a
	// removable device that has been removed. Since a removed device obviously
	// cannot be sized and initialized, the table entry for such a device will
	// have ciscoFlashDeviceSize equal to zero, and the following objects will
	// have an indeterminate value:         ciscoFlashDeviceMinPartitionSize,
	// ciscoFlashDeviceMaxPartitions,         ciscoFlashDevicePartitions, and
	// ciscoFlashDeviceChipCount. ciscoFlashDeviceRemovable will be true to
	// indicate it is removable.
	CiscoFlashDeviceTable CISCOFLASHMIB_CiscoFlashDeviceTable

	// Table of Flash device chip properties for each initialized Flash device.
	// This table is meant primarily for aiding error diagnosis.
	CiscoFlashChipTable CISCOFLASHMIB_CiscoFlashChipTable

	// Table of flash device partition properties for each initialized flash
	// partition. Whenever there is no explicit partitioning done, a single
	// partition spanning the entire device will be assumed to exist. There will
	// therefore always be atleast one partition on a device.
	CiscoFlashPartitionTable CISCOFLASHMIB_CiscoFlashPartitionTable

	// Table of information for files in a Flash partition.
	CiscoFlashFileTable CISCOFLASHMIB_CiscoFlashFileTable

	// Table of information for files on the manageable flash devices sorted by
	// File Types.
	CiscoFlashFileByTypeTable CISCOFLASHMIB_CiscoFlashFileByTypeTable

	// A table of Flash copy operation entries. Each entry represents a Flash copy
	// operation (to or from Flash) that has been initiated.
	CiscoFlashCopyTable CISCOFLASHMIB_CiscoFlashCopyTable

	// A table of Flash partitioning operation entries. Each entry represents a
	// Flash partitioning operation that has been initiated.
	CiscoFlashPartitioningTable CISCOFLASHMIB_CiscoFlashPartitioningTable

	// A table of misc Flash operation entries. Each entry represents a Flash
	// operation that has been initiated.
	CiscoFlashMiscOpTable CISCOFLASHMIB_CiscoFlashMiscOpTable
}

CISCOFLASHMIB

func (*CISCOFLASHMIB) GetEntityData 

func (cISCOFLASHMIB *CISCOFLASHMIB) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashCfg 

type CISCOFLASHMIB_CiscoFlashCfg struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Specifies whether or not a notification should be generated on the
	// insertion of a Flash device.  If the value of this object is 'true' then
	// the ciscoFlashDeviceInsertedNotif notification will be generated.  If the
	// value of this object is 'false' then the ciscoFlashDeviceInsertedNotif
	// notification will not be generated.  It is the responsibility of the
	// management entity to ensure that the SNMP administrative model is
	// configured in such a way as to allow the notification to be delivered. The
	// type is bool.
	CiscoFlashCfgDevInsNotifEnable interface{}

	// Specifies whether or not a notification should be generated on the removal
	// of a Flash device.  If the value of this object is 'true' then the
	// ciscoFlashDeviceRemovedNotif notification will be generated.  If the value
	// of this object is 'false' then the ciscoFlashDeviceRemovedNotif
	// notification will not be generated.  It is the responsibility of the
	// management entity to ensure that the SNMP administrative model is
	// configured in such a way as to allow the notification to be delivered. The
	// type is bool.
	CiscoFlashCfgDevRemNotifEnable interface{}

	// This object specifies whether or not a notification should be generated
	// when the free space falls below the threshold value on a flash partition
	// and on recovery from low space.  If the value of this object is 'true' then
	// ciscoFlashPartitionLowSpaceNotif and
	// ciscoFlashPartitionLowSpaceRecoveryNotif notifications will be generated.
	// If the value of this object is 'false' then the
	// ciscoFlashPartitionLowSpaceNotif  and
	// ciscoFlashPartitionLowSpaceRecoveryNotif notifications will not be
	// generated.  It is the responsibility of the management entity to ensure
	// that the SNMP administrative model is configured in such a way as to allow
	// the notifications to be delivered. The type is bool.
	CiscoFlashPartitionLowSpaceNotifEnable interface{}
}

CISCOFLASHMIB_CiscoFlashCfg

func (*CISCOFLASHMIB_CiscoFlashCfg) GetEntityData 

func (ciscoFlashCfg *CISCOFLASHMIB_CiscoFlashCfg) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashChipTable 

type CISCOFLASHMIB_CiscoFlashChipTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table of chip info for each flash device initialized in the
	// system. An entry is indexed by two objects - the device index and the chip
	// index within that device. The type is slice of
	// CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry.
	CiscoFlashChipEntry []*CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry
}

CISCOFLASHMIB_CiscoFlashChipTable Table of Flash device chip properties for each initialized Flash device. This table is meant primarily for aiding error diagnosis.

func (*CISCOFLASHMIB_CiscoFlashChipTable) GetEntityData 

func (ciscoFlashChipTable *CISCOFLASHMIB_CiscoFlashChipTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry 

type CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceIndex
	CiscoFlashDeviceIndex interface{}

	// This attribute is a key. Chip sequence number within selected flash device.
	// Used to index within chip info table. Value starts from 1 and should not be
	// greater than ciscoFlashDeviceChipCount for that device. When retrieving
	// chip information for chips within a partition, the sequence number should
	// lie between ciscoFlashPartitionStartChip & ciscoFlashPartitionEndChip (both
	// inclusive). The type is interface{} with range: 1..64.
	CiscoFlashChipIndex interface{}

	// Manufacturer and device code for a chip. Lower byte will contain the device
	// code. Upper byte will contain the manufacturer code. If a chip code is
	// unknown because it could not be queried out of the chip, the value of this
	// object will be 00:00. Since programming algorithms differ from chip type to
	// chip type, this chip code should be used to determine which algorithms to
	// use (and thereby whether the chip is supported in the first place). The
	// type is string with length: 0..5.
	CiscoFlashChipCode interface{}

	// Flash chip name corresponding to the chip code. The name will contain the
	// manufacturer and the chip type. It will be of the form :   Intel 27F008SA.
	// In the case where a chip code is unknown, this object will be an empty
	// (NULL) string. In the case where the chip code is known but the chip is not
	// supported by the system, this object will be an empty (NULL) string. A
	// management station is therefore expected to use the chip code and the chip
	// description in conjunction to provide additional information whenever the
	// ciscoFlashPartitionStatus object has the readOnly(1) value. The type is
	// string with length: 0..32.
	CiscoFlashChipDescr interface{}

	// This object will provide a cumulative count (since last system boot up or
	// initialization) of the number of write retries that were done in the chip.
	// If no writes have been done to Flash, the count will be zero. Typically, a
	// maximum of 25 retries are done on a single location before flagging a write
	// error. A management station is expected to get this object for each chip in
	// a partition after a write failure in that partition. To keep a track of
	// retries for a given write operation, the management station would have to
	// retrieve the values for the concerned chips before and after any write
	// operation. The type is interface{} with range: 0..4294967295.
	CiscoFlashChipWriteRetries interface{}

	// This object will provide a cumulative count (since last system boot up or
	// initialization) of the number of erase retries that were done in the chip.
	// Typically, a maximum of 2000 retries are done in a single erase zone (which
	// may be a full chip or a portion, depending on the chip technology) before
	// flagging an erase error. A management station is expected to get this
	// object for each chip in a partition after an erase failure in that
	// partition. To keep a track of retries for a given erase operation, the
	// management station would have to retrieve the values for the concerned
	// chips before and after any erase operation. Note that erase may be done
	// through an independent command, or through a copy-to-flash command. The
	// type is interface{} with range: 0..4294967295.
	CiscoFlashChipEraseRetries interface{}

	// The maximum number of write retries done at any single location before
	// declaring a write failure. The type is interface{} with range:
	// 0..4294967295.
	CiscoFlashChipMaxWriteRetries interface{}

	// The maximum number of erase retries done within an erase sector before
	// declaring an erase failure. The type is interface{} with range:
	// 0..4294967295.
	CiscoFlashChipMaxEraseRetries interface{}
}

CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry An entry in the table of chip info for each flash device initialized in the system. An entry is indexed by two objects - the device index and the chip index within that device.

func (*CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry) GetEntityData 

func (ciscoFlashChipEntry *CISCOFLASHMIB_CiscoFlashChipTable_CiscoFlashChipEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashCopyTable 

type CISCOFLASHMIB_CiscoFlashCopyTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A Flash copy operation entry. Each entry consists of a command, a source,
	// and optional parameters such as protocol to be used, a destination, a
	// server address, etc.  A management station wishing to create an entry
	// should first generate a pseudo-random serial number to be used as the index
	// to this sparse table.  The station should then create the associated
	// instance of the row status object. It must also, either in the same or in
	// successive PDUs, create the associated instance of the command and
	// parameter objects. It should also modify the default values for any of the
	// parameter objects if the defaults are not appropriate.  Once the
	// appropriate instances of all the command objects have been created, either
	// by an explicit SNMP set request or by default, the row status should be set
	// to active to initiate the operation. Note that this entire procedure may be
	// initiated via a single set request which specifies a row status  of
	// createAndGo as well as specifies valid values for the non-defaulted
	// parameter objects.  Once an operation has been activated, it cannot be
	// stopped.  Once the operation completes, the management station should
	// retrieve the value of the status object (and time if desired), and delete
	// the entry.  In order to prevent old entries from clogging the table,
	// entries will be aged out, but an entry will never be deleted within 5
	// minutes of completing. The type is slice of
	// CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry.
	CiscoFlashCopyEntry []*CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry
}

CISCOFLASHMIB_CiscoFlashCopyTable A table of Flash copy operation entries. Each entry represents a Flash copy operation (to or from Flash) that has been initiated.

func (*CISCOFLASHMIB_CiscoFlashCopyTable) GetEntityData 

func (ciscoFlashCopyTable *CISCOFLASHMIB_CiscoFlashCopyTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry 

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Object which specifies a unique entry in the
	// table. A management station wishing to initiate a copy operation should use
	// a pseudo-random value for this object when creating or modifying an
	// instance of a ciscoFlashCopyEntry. The type is interface{} with range:
	// 0..2147483647.
	CiscoFlashCopySerialNumber interface{}

	// The copy command to be executed. Mandatory. Note that it is possible for a
	// system to support multiple file systems (different file systems on
	// different Flash devices, or different file systems on different partitions
	// within a device). Each such file system may support only a subset of these
	// commands. If a command is unsupported, the invalidOperation(3) error will
	// be reported in the operation status.  Command                 Remarks
	// copyToFlashWithErase    Copy a file to flash; erase
	// flash before copy.                         Use the TFTP or rcp protocol.
	// copyToFlashWithoutErase Copy a file to flash; do not
	// erase.                         Note that this command will fail
	// if the PartitionNeedErasure                         object specifies that
	// the                         partition being copied to needs
	// erasure.                         Use the TFTP or rcp protocol.
	// copyFromFlash           Copy a file from flash using
	// the TFTP, rcp or lex protocol.                         Note that the lex
	// protocol                         can only be used to copy to a
	// lex device. copyFromFlhLog          Copy contents of FLH log to
	// server using TFTP protocol.   Command table           Parameters
	// copyToFlashWithErase    CopyProtocol
	// CopyServerAddress                         CopySourceName
	// CopyDestinationName (opt)                         CopyRemoteUserName (opt)
	// CopyNotifyOnCompletion (opt) copyToFlashWithoutErase CopyProtocol
	// CopyServerAddress                         CopySourceName
	// CopyDestinationName (opt)                         CopyRemoteUserName (opt)
	// CopyNotifyOnCompletion (opt) copyFromFlash           CopyProtocol
	// CopyServerAddress                         CopySourceName
	// CopyDestinationName (opt)                         CopyRemoteUserName (opt)
	// CopyNotifyOnCompletion (opt) copyFromFlhLog          CopyProtocol
	// CopyServerAddress                         CopyDestinationName
	// CopyNotifyOnCompletion (opt). The type is CiscoFlashCopyCommand.
	CiscoFlashCopyCommand interface{}

	// The protocol to be used for any copy. Optional. Will default to tftp if not
	// specified.  Since feature support depends on a software release, version
	// number within the release, platform, and maybe the image type (subset
	// type), a management station would be expected to somehow determine the
	// protocol support for a command. The type is CiscoFlashCopyProtocol.
	CiscoFlashCopyProtocol interface{}

	// The server address to be used for any copy. Optional. Will default to
	// 'FFFFFFFF'H  (or 255.255.255.255).  Since this object can just hold only
	// IPv4 Transport type, it is deprecated and replaced by
	// ciscoFlashCopyServerAddrRev1. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	CiscoFlashCopyServerAddress interface{}

	// Source file name, either in Flash or on a server, depending on the type of
	// copy command. Mandatory.  For a copy from Flash: File name must be of the
	// form         [device>:][:] where  is a value obtained from FlashDeviceName,
	// is obtained from FlashPartitionName     and  is the name of a file in
	// Flash. A management station could derive its own partition name as per the
	// description for the ciscoFlashPartitionName object. If <device> is not
	// specified, the default Flash device will be assumed. If <partition> is not
	// specified, the default partition will be assumed. If a device is not
	// partitioned into 2 or more partitions, this value may be left out.  For a
	// copy to Flash, the file name will be as per the file naming conventions and
	// path to the file on the server. The type is string with length: 1..255.
	CiscoFlashCopySourceName interface{}

	// Destination file name.  For a copy to Flash: File name must be of the form
	// {device>:][<partition>:]<file> where <device> is a value obtained from
	// FlashDeviceName,       <partition> is obtained from FlashPartitionName
	// and <file> is any character string that does not have embedded colon
	// characters. A management station could derive its own partition name as per
	// the description for the ciscoFlashPartitionName object. If <device> is not
	// specified, the default Flash device will be assumed. If <partition> is not
	// specified, the default partition will be assumed. If a device is not
	// partitioned into 2 or more partitions, this value may be left out. If
	// <file> is not specified, it will default to <file> specified in
	// ciscoFlashCopySourceName.  For a copy from Flash via tftp or rcp, the file
	// name will be as per the file naming conventions and destination
	// sub-directory on the server. If not specified, <file> from the source file
	// name will be used. For a copy from Flash via lex, this string will consist
	// of numeric characters specifying the interface on the lex box that will
	// receive the source flash image. The type is string with length: 0..255.
	CiscoFlashCopyDestinationName interface{}

	// Remote user name for copy via rcp protocol. Optional. This object will be
	// ignored for protocols other than rcp. If specified, it will override the
	// remote user-name configured through the         rcmd remote-username
	// configuration command. The remote user-name is sent as the server user-name
	// in an rcp command request sent by the system to a remote rcp server. The
	// type is string with length: 1..255.
	CiscoFlashCopyRemoteUserName interface{}

	// The status of the specified copy operation.  copyOperationPending :
	// operation request is received and         pending for validation and
	// process  copyInProgress :         specified operation is active
	// copyOperationSuccess :         specified operation is supported and
	// completed successfully  copyInvalidOperation :         command invalid or
	// command-protocol-device         combination unsupported
	// copyInvalidProtocol :         invalid protocol specified
	// copyInvalidSourceName :         invalid source file name specified
	// For the  copy from flash to lex operation, this         error code will be
	// returned when the source file         is not a valid lex image.
	// copyInvalidDestName :         invalid target name (file or partition or
	// device name) specified         For the  copy from flash to lex operation,
	// this         error code will be returned when no lex devices         are
	// connected to the router or when an invalid         lex interface number has
	// been specified in         the destination string.  copyInvalidServerAddress
	// :         invalid server address specified  copyDeviceBusy :
	// specified device is in use and locked by         another process
	// copyDeviceOpenError :         invalid device name  copyDeviceError :
	// device read, write or erase error  copyDeviceNotProgrammable :
	// device is read-only but a write or erase         operation was specified
	// copyDeviceFull :         device is filled to capacity  copyFileOpenError :
	// invalid file name; file not found in partition  copyFileTransferError :
	// file transfer was unsuccessfull; network failure  copyFileChecksumError :
	// file checksum in Flash failed  copyNoMemory :         system running low on
	// memory  copyUnknownFailure :         failure unknown  copyProhibited:
	// stop user from overwriting current boot image file. The type is
	// CiscoFlashCopyStatus.
	CiscoFlashCopyStatus interface{}

	// Specifies whether or not a notification should be generated on the
	// completion of the copy operation. If specified,
	// ciscoFlashCopyCompletionTrap will be generated. It is the responsibility of
	// the management entity to ensure that the SNMP administrative model is
	// configured in such a way as to allow the notification to be delivered. The
	// type is bool.
	CiscoFlashCopyNotifyOnCompletion interface{}

	// Time taken for the copy operation. This object will be like a stopwatch,
	// starting when the operation starts, stopping when the operation completes.
	// If a management entity keeps a database of completion times for various
	// operations, it can then use the stopwatch capability to display percentage
	// completion time. The type is interface{} with range: 0..4294967295.
	CiscoFlashCopyTime interface{}

	// The status of this table entry. The type is RowStatus.
	CiscoFlashCopyEntryStatus interface{}

	// Specifies whether the file that is copied need to be verified for integrity
	// / authenticity, after copy succeeds. If it is set to true, and if the file
	// that is copied doesn't have integrity /authenticity attachement, or the
	// integrity / authenticity check fails, then the command will be aborted, and
	// the file that is copied will be deleted from the destination file system.
	// The type is bool.
	CiscoFlashCopyVerify interface{}

	// This object indicates the transport type of the address contained in
	// ciscoFlashCopyServerAddrRev1. Optional. Will default to '1' (IPv4 address
	// type). The type is InetAddressType.
	CiscoFlashCopyServerAddrType interface{}

	// The server address to be used for any copy. Optional. Will default to
	// 'FFFFFFFF'H  (or 255.255.255.255).  The Format of this address depends on
	// the value of the ciscoFlashCopyServerAddrType.  This object deprecates the
	// old ciscoFlashCopyServerAddress object. The type is string with length:
	// 0..255.
	CiscoFlashCopyServerAddrRev1 interface{}

	// Password used by ftp, sftp or scp for copying a file to/from an
	// ftp/sftp/scp server. This object must be created when the
	// ciscoFlashCopyProtocol is ftp, sftp or scp. Reading it returns a
	// zero-length string for security reasons. The type is string with length:
	// 1..40.
	CiscoFlashCopyRemotePassword interface{}
}

CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry A Flash copy operation entry. Each entry consists of a command, a source, and optional parameters such as protocol to be used, a destination, a server address, etc.

A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate.

Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects.

Once an operation has been activated, it cannot be stopped.

Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.

func (*CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry) GetEntityData 

func (ciscoFlashCopyEntry *CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand 

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand string

CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand represents CopyNotifyOnCompletion (opt) 

const (
	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand_copyToFlashWithErase CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand = "copyToFlashWithErase"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand_copyToFlashWithoutErase CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand = "copyToFlashWithoutErase"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand_copyFromFlash CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand = "copyFromFlash"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand_copyFromFlhLog CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyCommand = "copyFromFlhLog"
)

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol 

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol string

CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol represents the protocol support for a command. 

const (
	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_tftp CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "tftp"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_rcp CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "rcp"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_lex CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "lex"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_ftp CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "ftp"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_scp CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "scp"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol_sftp CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyProtocol = "sftp"
)

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus 

type CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus string

CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus represents stop user from overwriting current boot image file. 

const (
	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyOperationPending CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyOperationPending"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInProgress CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInProgress"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyOperationSuccess CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyOperationSuccess"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidOperation CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidOperation"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidProtocol CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidProtocol"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidSourceName CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidSourceName"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidDestName CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidDestName"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidServerAddress CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidServerAddress"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyDeviceBusy CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyDeviceBusy"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyDeviceOpenError CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyDeviceOpenError"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyDeviceError CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyDeviceError"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyDeviceNotProgrammable CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyDeviceNotProgrammable"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyDeviceFull CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyDeviceFull"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyFileOpenError CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyFileOpenError"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyFileTransferError CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyFileTransferError"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyFileChecksumError CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyFileChecksumError"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyNoMemory CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyNoMemory"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyUnknownFailure CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyUnknownFailure"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyInvalidSignature CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyInvalidSignature"

	CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus_copyProhibited CISCOFLASHMIB_CiscoFlashCopyTable_CiscoFlashCopyEntry_CiscoFlashCopyStatus = "copyProhibited"
)

type CISCOFLASHMIB_CiscoFlashDevice 

type CISCOFLASHMIB_CiscoFlashDevice struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Number of Flash devices supported by the system. If the system does not
	// support any Flash devices, this MIB will not be loaded on that system. The
	// value of this object will therefore be atleast 1. The type is interface{}
	// with range: 0..4294967295.
	CiscoFlashDevicesSupported interface{}
}

CISCOFLASHMIB_CiscoFlashDevice

func (*CISCOFLASHMIB_CiscoFlashDevice) GetEntityData 

func (ciscoFlashDevice *CISCOFLASHMIB_CiscoFlashDevice) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashDeviceTable 

type CISCOFLASHMIB_CiscoFlashDeviceTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table of flash device properties for each initialized flash
	// device. Each entry can be randomly accessed by using ciscoFlashDeviceIndex
	// as an index into the table. Note that removable devices will have an entry
	// in the table even when they have been removed. However, a non-removable
	// device that has not been installed will not have an entry in the table. The
	// type is slice of CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry.
	CiscoFlashDeviceEntry []*CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry
}

CISCOFLASHMIB_CiscoFlashDeviceTable Table of Flash device properties for each initialized Flash device. Each Flash device installed in a system is detected, sized, and initialized when the system image boots up. For removable Flash devices, the device properties will be dynamically deleted and recreated as the device is removed and inserted. Note that in this case, the newly inserted device may not be the same as the earlier removed one. The ciscoFlashDeviceInitTime object is available for a management station to determine the time at which a device was initialized, and thereby detect the change of a removable device. A removable device that has not been installed will also have an entry in this table. This is to let a management station know about a removable device that has been removed. Since a removed device obviously cannot be sized and initialized, the table entry for such a device will have ciscoFlashDeviceSize equal to zero, and the following objects will have an indeterminate value: 

ciscoFlashDeviceMinPartitionSize,
ciscoFlashDeviceMaxPartitions,
ciscoFlashDevicePartitions, and
ciscoFlashDeviceChipCount.

ciscoFlashDeviceRemovable will be true to indicate it is removable.

func (*CISCOFLASHMIB_CiscoFlashDeviceTable) GetEntityData 

func (ciscoFlashDeviceTable *CISCOFLASHMIB_CiscoFlashDeviceTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry 

type CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Flash device sequence number to index within the
	// table of initialized flash devices. The lowest value should be 1. The
	// highest should be less than or equal to the value of the
	// ciscoFlashDevicesSupported object. The type is interface{} with range:
	// 1..4294967295.
	CiscoFlashDeviceIndex interface{}

	// Total size of the Flash device. For a removable device, the size will be
	// zero if the device has been removed.  If the total size of the flash device
	// is greater than the maximum value reportable by this object then this
	// object should report its maximum value(4,294,967,295) and
	// ciscoFlashDeviceSizeExtended must be used to report the flash device's
	// size. The type is interface{} with range: 0..4294967295. Units are bytes.
	CiscoFlashDeviceSize interface{}

	// This object will give the minimum partition size supported for this device.
	// For systems that execute code directly out of Flash, the minimum partition
	// size needs to be the bank size. (Bank size is equal to the size of a chip
	// multiplied by the width of the device. In most cases, the device width is 4
	// bytes, and so the bank size would be four times the size of a chip). This
	// has to be so because all programming commands affect the operation of an
	// entire chip (in our case, an entire bank because all operations are done on
	// the entire width of the device) even though the actual command may be
	// localized to a small portion of each chip. So when executing code out of
	// Flash, one needs to be able to write and erase some portion of Flash
	// without affecting the code execution. For systems that execute code out of
	// DRAM or ROM, it is possible to partition Flash with a finer granularity
	// (for eg., at erase sector boundaries) if the system code supports such
	// granularity.  This object will let a management entity know the minimum
	// partition size as defined by the system. If the system does not support
	// partitioning, the value will be equal to the device size in
	// ciscoFlashDeviceSize. The maximum number of partitions that could be
	// configured will be equal to the minimum of ciscoFlashDeviceMaxPartitions
	// and (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionSize).  If the
	// total size of the flash device is greater than the maximum value reportable
	// by this object then this object should report its maximum
	// value(4,294,967,295) and ciscoFlashDeviceMinPartitionSizeExtended must be
	// used to report the flash device's minimum partition size. The type is
	// interface{} with range: 0..4294967295. Units are bytes.
	CiscoFlashDeviceMinPartitionSize interface{}

	// Max number of partitions supported by the system for this Flash device.
	// Default will be 1, which actually means that partitioning is not supported.
	// Note that this value will be defined by system limitations, not by the
	// flash device itself (for eg., the system may impose a limit of 2 partitions
	// even though the device may be large enough to be partitioned into 4 based
	// on the smallest partition unit supported). On systems that execute code out
	// of Flash, partitioning is a way of creating multiple file systems in the
	// Flash device so that writing into or erasing of one file system can be done
	// while executing code residing in another file system. For systems executing
	// code out of DRAM, partitioning gives a way of sub-dividing a large Flash
	// device for easier management of files. The type is interface{} with range:
	// 0..4294967295.
	CiscoFlashDeviceMaxPartitions interface{}

	// Flash device partitions actually present. Number of partitions cannot
	// exceed the minimum of ciscoFlashDeviceMaxPartitions and
	// (ciscoFlashDeviceSize / ciscoFlashDeviceMinPartitionSize). Will be equal to
	// at least 1, the case where the partition spans the entire device (actually
	// no partitioning). A partition will contain one or more minimum partition
	// units (where a minimum partition unit is defined by
	// ciscoFlashDeviceMinPartitionSize). The type is interface{} with range:
	// 0..4294967295.
	CiscoFlashDevicePartitions interface{}

	// Total number of chips within the Flash device. The purpose of this object
	// is to provide information upfront to a management station on how much chip
	// info to expect and possibly help double check the chip index against an
	// upper limit when randomly retrieving chip info for a partition. The type is
	// interface{} with range: 0..64.
	CiscoFlashDeviceChipCount interface{}

	// Flash device name. This name is used to refer to the device within the
	// system. Flash operations get directed to a device based on this name. The
	// system has a concept of a default device. This would be the primary or most
	// used device in case of multiple devices. The system directs an operation to
	// the default device whenever a device name is not specified. The device name
	// is therefore mandatory except when the operation is being done on the
	// default device, or, the system supports only a single Flash device. The
	// device name will always be available for a removable device, even when the
	// device has been removed. The type is string with length: 0..16.
	CiscoFlashDeviceName interface{}

	// Description of a Flash device. The description is meant to explain what the
	// Flash device and its purpose is. Current values are:   System flash - for
	// the primary Flash used to store full                  system images.   Boot
	// flash   - for the secondary Flash used to store                  bootstrap
	// images. The ciscoFlashDeviceDescr, ciscoFlashDeviceController (if
	// applicable), and ciscoFlashPhyEntIndex objects are expected to collectively
	// give all information about a Flash device. The device description will
	// always be available for a removable device, even when the device has been
	// removed. The type is string with length: 0..64.
	CiscoFlashDeviceDescr interface{}

	// Flash device controller. The h/w card that actually controls Flash
	// read/write/erase. Relevant for the AGS+ systems where Flash may be
	// controlled by the MC+, STR or the ENVM cards, cards that may not actually
	// contain the Flash chips. For systems that have removable PCMCIA flash cards
	// that are controlled by a PCMCIA controller chip, this object may contain a
	// description of that controller chip. Where irrelevant (Flash is a direct
	// memory mapped device accessed directly by the main processor), this object
	// will have an empty (NULL) string. The type is string with length: 0..64.
	CiscoFlashDeviceController interface{}

	// This object will point to an instance of a card entry in the cardTable. The
	// card entry will give details about the card on which the Flash device is
	// actually located. For most systems, this is usually the main processor
	// board. On the AGS+ systems, Flash is located on a separate multibus card
	// such as the MC. This object will therefore be used to essentially index
	// into cardTable to retrieve details about the card such as cardDescr,
	// cardSlotNumber, etc. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	CiscoFlashDeviceCard interface{}

	// This object gives the state of a jumper (if present and can be determined)
	// that controls the programming voltage called Vpp to the Flash device. Vpp
	// is required for programming (erasing and writing) Flash. For certain older
	// technology chips it is also required for identifying the chips (which in
	// turn is required to identify which programming algorithms to use; different
	// chips require different algorithms and commands). The purpose of the
	// jumper, on systems where it is available, is to write protect a Flash
	// device. On most of the newer remote access routers, this jumper is
	// unavailable since users are not expected to visit remote sites just to
	// install and remove the jumpers when upgrading software in the Flash device.
	// The unknown(3) value will be returned for such systems and can be
	// interpreted to mean that a programming jumper is not present or not
	// required on those systems. On systems where the programming jumper state
	// can be read back via a hardware register, the installed(1) or
	// notInstalled(2) value will be returned. This object is expected to be used
	// in conjunction with the ciscoFlashPartitionStatus object whenever that
	// object has the readOnly(1) value. In such a case, this object will indicate
	// whether the programming jumper is a possible reason for the readOnly state.
	// The type is CiscoFlashDeviceProgrammingJumper.
	CiscoFlashDeviceProgrammingJumper interface{}

	// System time at which device was initialized. For fixed devices, this will
	// be the system time at boot up. For removable devices, it will be the time
	// at which the device was inserted, which may be boot up time, or a later
	// time (if device was inserted later). If a device (fixed or removable) was
	// repartitioned, it will be the time of repartitioning. The purpose of this
	// object is to help a management station determine if a removable device has
	// been changed. The application should retrieve this object prior to any
	// operation and compare with the previously retrieved value. Note that this
	// time will not be real time but a running time maintained by the system.
	// This running time starts from zero when the system boots up. For a
	// removable device that has been removed, this value will be zero. The type
	// is interface{} with range: 0..4294967295.
	CiscoFlashDeviceInitTime interface{}

	// Whether Flash device is removable. Generally, only PCMCIA Flash cards will
	// be treated as removable. Socketed Flash chips and Flash SIMM modules will
	// not be treated as removable. Simply put, only those Flash devices that can
	// be inserted or removed without opening the hardware casing will be
	// considered removable. Further, removable Flash devices are expected to have
	// the necessary hardware support -   1. on-line removal and insertion   2.
	// interrupt generation on removal or insertion. The type is bool.
	CiscoFlashDeviceRemovable interface{}

	// This object indicates the physical entity index of a physical entity in
	// entPhysicalTable which the flash device actually located. The type is
	// interface{} with range: 0..2147483647.
	CiscoFlashPhyEntIndex interface{}

	// Extended Flash device name whose size can be upto 255 characters. This name
	// is used to refer to the device within the system. Flash operations get
	// directed to a device based on this name. The system has a concept of a
	// default device. This would be the primary or most used device in case of
	// multiple devices. The system directs an operation to the default device
	// whenever a device name is not specified. The device name is therefore
	// mandatory except when the operation is being done on the default device,
	// or, the system supports only a single Flash device. The device name will
	// always be available for a removable device, even when the device has been
	// removed. The type is string with length: 0..255.
	CiscoFlashDeviceNameExtended interface{}

	// Total size of the Flash device. For a removable device, the size will be
	// zero if the device has been removed.  This object is a 64-bit version of
	// ciscoFlashDeviceSize. The type is interface{} with range:
	// 0..18446744073709551615. Units are bytes.
	CiscoFlashDeviceSizeExtended interface{}

	// This object provides the minimum partition size supported for this device.
	// This object is a 64-bit version of  ciscoFlashDeviceMinPatitionSize. The
	// type is interface{} with range: 0..18446744073709551615.
	CiscoFlashDeviceMinPartitionSizeExtended interface{}
}

CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry An entry in the table of flash device properties for each initialized flash device. Each entry can be randomly accessed by using ciscoFlashDeviceIndex as an index into the table. Note that removable devices will have an entry in the table even when they have been removed. However, a non-removable device that has not been installed will not have an entry in the table.

func (*CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry) GetEntityData 

func (ciscoFlashDeviceEntry *CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper 

type CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper string

CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper represents for the readOnly state. 

const (
	CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper_installed CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper = "installed"

	CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper_notInstalled CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper = "notInstalled"

	CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper_unknown CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceProgrammingJumper = "unknown"
)

type CISCOFLASHMIB_CiscoFlashFileByTypeTable 

type CISCOFLASHMIB_CiscoFlashFileByTypeTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table of Flash file properties for each initialized Flash
	// partition. Each entry represents a file sorted by file type.  This table
	// contains exactly the same set of rows as are contained in the
	// ciscoFlashFileTable but in a different order, i.e., ordered by  the type of
	// file, given by  ciscoFlashFileType; the device number, given by
	// ciscoFlashDeviceIndex; the partition number within the device, given by
	// ciscoFlashPartitionIndex; the file number within the partition, given by
	// ciscoFlashFileIndex. The type is slice of
	// CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry.
	CiscoFlashFileByTypeEntry []*CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry
}

CISCOFLASHMIB_CiscoFlashFileByTypeTable Table of information for files on the manageable flash devices sorted by File Types.

func (*CISCOFLASHMIB_CiscoFlashFileByTypeTable) GetEntityData 

func (ciscoFlashFileByTypeTable *CISCOFLASHMIB_CiscoFlashFileByTypeTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry 

type CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is FlashFileType. Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileType
	CiscoFlashFileType interface{}

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceIndex
	CiscoFlashDeviceIndex interface{}

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionIndex
	CiscoFlashPartitionIndex interface{}

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileIndex
	CiscoFlashFileIndex interface{}

	// This object represents exactly the same info as ciscoFlashFileSize object
	// in ciscoFlashFileTable. The type is interface{} with range: 0..4294967295.
	// Units are bytes.
	CiscoFlashFileByTypeSize interface{}

	// This object represents exactly the same info as ciscoFlashFileChecksum
	// object in ciscoFlashFileTable. The type is string.
	CiscoFlashFileByTypeChecksum interface{}

	// This object represents exactly the same info as ciscoFlashFileStatus object
	// in ciscoFlashFileTable. The type is CiscoFlashFileByTypeStatus.
	CiscoFlashFileByTypeStatus interface{}

	// This object represents exactly the same info as ciscoFlashFileName object
	// in ciscoFlashFileTable. The type is string with length: 1..255.
	CiscoFlashFileByTypeName interface{}

	// This object represents exactly the same info as ciscoFlashFileDate object
	// in ciscoFlashFileTable. The type is string.
	CiscoFlashFileByTypeDate interface{}
}

CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file sorted by file type.

This table contains exactly the same set of rows as are contained in the ciscoFlashFileTable but in a different order, i.e., ordered by

the type of file, given by ciscoFlashFileType; the device number, given by ciscoFlashDeviceIndex; the partition number within the device, given by ciscoFlashPartitionIndex; the file number within the partition, given by ciscoFlashFileIndex.

func (*CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry) GetEntityData 

func (ciscoFlashFileByTypeEntry *CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus 

type CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus string

CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus represents object in ciscoFlashFileTable. 

const (
	CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus_deleted CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus = "deleted"

	CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus_invalidChecksum CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus = "invalidChecksum"

	CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus_valid CISCOFLASHMIB_CiscoFlashFileByTypeTable_CiscoFlashFileByTypeEntry_CiscoFlashFileByTypeStatus = "valid"
)

type CISCOFLASHMIB_CiscoFlashFileTable 

type CISCOFLASHMIB_CiscoFlashFileTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table of Flash file properties for each initialized Flash
	// partition. Each entry represents a file and gives details about the file.
	// An entry is indexed using the device number, partition number within the
	// device, and file number within the partition. The type is slice of
	// CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry.
	CiscoFlashFileEntry []*CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry
}

CISCOFLASHMIB_CiscoFlashFileTable Table of information for files in a Flash partition.

func (*CISCOFLASHMIB_CiscoFlashFileTable) GetEntityData 

func (ciscoFlashFileTable *CISCOFLASHMIB_CiscoFlashFileTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry 

type CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceIndex
	CiscoFlashDeviceIndex interface{}

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionIndex
	CiscoFlashPartitionIndex interface{}

	// This attribute is a key. Flash file sequence number used to index within a
	// Flash partition directory table. The type is interface{} with range:
	// 1..4294967295.
	CiscoFlashFileIndex interface{}

	// Size of the file in bytes. Note that this size does not include the size of
	// the filesystem file header. File size will always be non-zero. The type is
	// interface{} with range: 0..4294967295. Units are bytes.
	CiscoFlashFileSize interface{}

	// File checksum stored in the file header. This checksum is computed and
	// stored when the file is written into Flash. It serves to validate the data
	// written into Flash. Whereas the system will generate and store the checksum
	// internally in hexadecimal form, this object will provide the checksum in a
	// string form. The checksum will be available for all valid and
	// invalid-checksum files. The type is string.
	CiscoFlashFileChecksum interface{}

	// Status of a file. A file could be explicitly deleted if the file system
	// supports such a user command facility. Alternately, an existing good file
	// would be automatically deleted if another good file with the same name were
	// copied in. Note that deleted files continue to occupy prime Flash real
	// estate.  A file is marked as having an invalid checksum if any checksum
	// mismatch was detected while writing or reading the file. Incomplete files
	// (files truncated either because of lack of free space, or a network
	// download failure) are also written with a bad checksum and marked as
	// invalid. The type is CiscoFlashFileStatus.
	CiscoFlashFileStatus interface{}

	// Flash file name as specified by the user copying in the file. The name
	// should not include the colon (:) character as it is a special separator
	// character used to delineate the device name, partition name, and the file
	// name. The type is string with length: 1..255.
	CiscoFlashFileName interface{}

	// Type of the file. The type is FlashFileType.
	CiscoFlashFileType interface{}

	// The time at which this file was created. The type is string.
	CiscoFlashFileDate interface{}
}

CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file and gives details about the file. An entry is indexed using the device number, partition number within the device, and file number within the partition.

func (*CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry) GetEntityData 

func (ciscoFlashFileEntry *CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus 

type CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus string

CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus represents marked as invalid. 

const (
	CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus_deleted CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus = "deleted"

	CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus_invalidChecksum CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus = "invalidChecksum"

	CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus_valid CISCOFLASHMIB_CiscoFlashFileTable_CiscoFlashFileEntry_CiscoFlashFileStatus = "valid"
)

type CISCOFLASHMIB_CiscoFlashMiscOpTable 

type CISCOFLASHMIB_CiscoFlashMiscOpTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A Flash operation entry. Each entry consists of a command, a target, and
	// any optional parameters.  A management station wishing to create an entry
	// should first generate a pseudo-random serial number to be used as the index
	// to this sparse table.  The station should then create the associated
	// instance of the row status object. It must also, either in the same or in
	// successive PDUs, create the associated instance of the command and
	// parameter objects. It should also modify the default values for any of the
	// parameter objects if the defaults are not appropriate.  Once the
	// appropriate instances of all the command objects have been created, either
	// by an explicit SNMP set request or by default, the row status should be set
	// to active to initiate the operation. Note that this entire procedure may be
	// initiated via a single set request which specifies a row status of
	// createAndGo as well as specifies valid values for the non-defaulted
	// parameter objects.  Once an operation has been activated, it cannot be
	// stopped.  Once the operation completes, the management station should
	// retrieve the value of the status object (and time if desired), and delete
	// the entry.  In order to prevent old entries from clogging the table,
	// entries will be aged out, but an entry will never be deleted within 5
	// minutes of completing. The type is slice of
	// CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry.
	CiscoFlashMiscOpEntry []*CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry
}

CISCOFLASHMIB_CiscoFlashMiscOpTable A table of misc Flash operation entries. Each entry represents a Flash operation that has been initiated.

func (*CISCOFLASHMIB_CiscoFlashMiscOpTable) GetEntityData 

func (ciscoFlashMiscOpTable *CISCOFLASHMIB_CiscoFlashMiscOpTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry 

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Object which specifies a unique entry in the
	// table. A management station wishing to initiate a flash operation should
	// use a pseudo-random value for this object when creating or modifying an
	// instance of a ciscoFlashMiscOpEntry. The type is interface{} with range:
	// 0..2147483647.
	CiscoFlashMiscOpSerialNumber interface{}

	// The command to be executed. Mandatory. Note that it is possible for a
	// system to support multiple file systems (different file systems on
	// different Flash devices, or different file systems on different partitions
	// within a device). Each such file system may support only a subset of these
	// commands. If a command is unsupported, the miscOpInvalidOperation(3) error
	// will be reported in the operation status.  Command         Remarks erase
	// Erase flash. verify          Verify flash file checksum. delete
	// Delete a file. undelete        Revive a deleted file .                 Note
	// that there are limits on                 the number of times a file can
	// be deleted and undeleted. When                 this limit is exceeded, the
	// system will return the appropriate                 error. squeeze
	// Recover space occupied by                 deleted files. This command
	// preserves the good files, erases                 out the file system, then
	// restores                 the preserved good files. format          Format a
	// flash device.  Command table   Parameters erase
	// MiscOpDestinationName                 MiscOpNotifyOnCompletion (opt) verify
	// MiscOpDestinationName                 MiscOpNotifyOnCompletion (opt) delete
	// MiscOpDestinationName                 MiscOpNotifyOnCompletion (opt)
	// undelete        MiscOpDestinationName
	// MiscOpNotifyOnCompletion (opt) squeeze         MiscOpDestinationName
	// MiscOpNotifyOnCompletion (opt) format          MiscOpDestinationName
	// MiscOpNotifyOnCompletion (opt). The type is CiscoFlashMiscOpCommand.
	CiscoFlashMiscOpCommand interface{}

	// Destination file, or partition name. File name must be of the form
	// [device>:][<partition>:]<file> where <device> is a value obtained from
	// FlashDeviceName,       <partition> is obtained from FlashPartitionName
	// and <file> is the name of a file in Flash. While leading and/or trailing
	// whitespaces are acceptable, no whitespaces are allowed within the path
	// itself.  A management station could derive its own partition name as per
	// the description for the ciscoFlashPartitionName object. If <device> is not
	// specified, the default Flash device will be assumed. If <partition> is not
	// specified, the default partition will be assumed. If a device is not
	// partitioned into 2 or more partitions, this value may be left out.  For an
	// operation on a partition, eg., the erase command, this object would specify
	// the partition name in the form:         [device>:][<partition>:]. The type
	// is string with length: 0..255.
	CiscoFlashMiscOpDestinationName interface{}

	// The status of the specified operation. miscOpInProgress :         specified
	// operation is active  miscOpOperationSuccess :         specified operation
	// is supported and completed         successfully  miscOpInvalidOperation :
	// command invalid or command-protocol-device         combination unsupported
	// miscOpInvalidDestName :         invalid target name (file or partition or
	// device name) specified  miscOpDeviceBusy :         specified device is in
	// use and locked by another         process  miscOpDeviceOpenError :
	// invalid device name  miscOpDeviceError :         device read, write or
	// erase error  miscOpDeviceNotProgrammable :         device is read-only but
	// a write or erase         operation was specified  miscOpFileOpenError :
	// invalid file name; file not found in partition  miscOpFileDeleteFailure :
	// file could not be deleted; delete count exceeded  miscOpFileUndeleteFailure
	// :         file could not be undeleted; undelete count         exceeded
	// miscOpFileChecksumError :         file has a bad checksum  miscOpNoMemory :
	// system running low on memory  miscOpUnknownFailure :         failure
	// unknown  miscOpSqueezeFailure :         the squeeze operation failed
	// miscOpNoSuchFile :         a valid but nonexistent file name was specified
	// miscOpFormatFailure :         the format operation failed. The type is
	// CiscoFlashMiscOpStatus.
	CiscoFlashMiscOpStatus interface{}

	// Specifies whether or not a notification should be generated on the
	// completion of an operation. If specified, ciscoFlashMiscOpCompletionTrap
	// will be generated. It is the responsibility of the management entity to
	// ensure that the SNMP administrative model is configured in such a way as to
	// allow the notification to be delivered. The type is bool.
	CiscoFlashMiscOpNotifyOnCompletion interface{}

	// Time taken for the operation. This object will be like a stopwatch,
	// starting when the operation starts, stopping when the operation completes.
	// If a management entity keeps a database of completion times for various
	// operations, it can then use the stopwatch capability to display percentage
	// completion time. The type is interface{} with range: 0..4294967295.
	CiscoFlashMiscOpTime interface{}

	// The status of this table entry. The type is RowStatus.
	CiscoFlashMiscOpEntryStatus interface{}
}

CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry A Flash operation entry. Each entry consists of a command, a target, and any optional parameters.

A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate.

Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects.

Once an operation has been activated, it cannot be stopped.

Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.

func (*CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry) GetEntityData 

func (ciscoFlashMiscOpEntry *CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand 

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand string

CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand represents MiscOpNotifyOnCompletion (opt) 

const (
	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_erase CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "erase"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_verify CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "verify"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_delete_ CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "delete"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_undelete CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "undelete"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_squeeze CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "squeeze"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand_format CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpCommand = "format"
)

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus 

type CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus string

CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus represents the format operation failed 

const (
	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpInProgress CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpInProgress"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpOperationSuccess CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpOperationSuccess"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpInvalidOperation CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpInvalidOperation"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpInvalidDestName CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpInvalidDestName"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpDeviceBusy CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpDeviceBusy"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpDeviceOpenError CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpDeviceOpenError"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpDeviceError CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpDeviceError"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpDeviceNotProgrammable CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpDeviceNotProgrammable"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpFileOpenError CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpFileOpenError"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpFileDeleteFailure CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpFileDeleteFailure"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpFileUndeleteFailure CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpFileUndeleteFailure"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpFileChecksumError CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpFileChecksumError"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpNoMemory CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpNoMemory"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpUnknownFailure CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpUnknownFailure"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpSqueezeFailure CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpSqueezeFailure"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpNoSuchFile CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpNoSuchFile"

	CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus_miscOpFormatFailure CISCOFLASHMIB_CiscoFlashMiscOpTable_CiscoFlashMiscOpEntry_CiscoFlashMiscOpStatus = "miscOpFormatFailure"
)

type CISCOFLASHMIB_CiscoFlashPartitionTable 

type CISCOFLASHMIB_CiscoFlashPartitionTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the table of flash partition properties for each initialized
	// flash partition. Each entry will be indexed by a device number and a
	// partition number within the device. The type is slice of
	// CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry.
	CiscoFlashPartitionEntry []*CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry
}

CISCOFLASHMIB_CiscoFlashPartitionTable Table of flash device partition properties for each initialized flash partition. Whenever there is no explicit partitioning done, a single partition spanning the entire device will be assumed to exist. There will therefore always be atleast one partition on a device.

func (*CISCOFLASHMIB_CiscoFlashPartitionTable) GetEntityData 

func (ciscoFlashPartitionTable *CISCOFLASHMIB_CiscoFlashPartitionTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry 

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// cisco_flash_mib.CISCOFLASHMIB_CiscoFlashDeviceTable_CiscoFlashDeviceEntry_CiscoFlashDeviceIndex
	CiscoFlashDeviceIndex interface{}

	// This attribute is a key. Flash partition sequence number used to index
	// within table of initialized flash partitions. The type is interface{} with
	// range: 1..4294967295.
	CiscoFlashPartitionIndex interface{}

	// Chip sequence number of first chip in partition. Used as an index into the
	// chip table. The type is interface{} with range: 1..64.
	CiscoFlashPartitionStartChip interface{}

	// Chip sequence number of last chip in partition. Used as an index into the
	// chip table. The type is interface{} with range: 1..64.
	CiscoFlashPartitionEndChip interface{}

	// Flash partition size. It should be an integral multiple of
	// ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size
	// will be equal to ciscoFlashDeviceSize.  If the size of the flash partition
	// is greater than the maximum value reportable by this object then this
	// object should report its maximum value(4,294,967,295) and
	// ciscoFlashPartitionSizeExtended must be used to report the flash
	// partition's size. The type is interface{} with range: 1..4294967295. Units
	// are bytes.
	CiscoFlashPartitionSize interface{}

	// Free space within a Flash partition. Note that the actual size of a file in
	// Flash includes a small overhead that represents the file system's file
	// header. Certain file systems may also have a partition or device header
	// overhead to be considered when computing the free space. Free space will be
	// computed as total partition size less size of all existing files
	// (valid/invalid/deleted files and including file header of each file), less
	// size of any partition header, less size of header of next file to be copied
	// in. In short, this object will give the size of the largest file that can
	// be copied in. The management entity will not be expected to know or use any
	// overheads such as file and partition header lengths, since such overheads
	// may vary from file system to file system. Deleted files in Flash do not
	// free up space. A partition may have to be erased in order to reclaim the
	// space occupied by files.  If the free space within a flash partition is
	// greater than the maximum value reportable by this object then this object
	// should report its maximum value(4,294,967,295) and
	// ciscoFlashPartitionFreeSpaceExtended must be used to report the flash
	// partition's free space. The type is interface{} with range: 0..4294967295.
	// Units are bytes.
	CiscoFlashPartitionFreeSpace interface{}

	// Count of all files in a flash partition. Both good and bad (deleted or
	// invalid checksum) files will be included in this count. The type is
	// interface{} with range: 0..4294967295.
	CiscoFlashPartitionFileCount interface{}

	// Checksum algorithm identifier for checksum method used by the file system.
	// Normally, this would be fixed for a particular file system. When a file
	// system writes a file to Flash, it checksums the data written. The checksum
	// then serves as a way to validate the data read back whenever the file is
	// opened for reading. Since there is no way, when using TFTP, to guarantee
	// that a network download has been error free (since UDP checksums may not
	// have been enabled), this object together with the ciscoFlashFileChecksum
	// object provides a method for any management station to regenerate the
	// checksum of the original file on the server and compare checksums to ensure
	// that the file download to Flash was error free. simpleChecksum represents a
	// simple 1s complement addition of short word values. Other algorithm values
	// will be added as necessary. The type is
	// CiscoFlashPartitionChecksumAlgorithm.
	CiscoFlashPartitionChecksumAlgorithm interface{}

	// Flash partition status can be :  * readOnly if device is not programmable
	// either because chips could not be recognized or an erroneous mismatch of
	// chips was detected. Chip recognition may fail either because the chips are
	// not supported by the system, or because the Vpp voltage required to
	// identify chips has been disabled via the programming jumper. The
	// ciscoFlashDeviceProgrammingJumper, ciscoFlashChipCode, and
	// ciscoFlashChipDescr objects can be examined to get more details on the
	// cause of this status * runFromFlash (RFF) if current image is running from
	// this partition. The ciscoFlashPartitionUpgradeMethod object will then
	// indicate whether the Flash Load Helper can be used to write a file to this
	// partition or not.  * readWrite if partition is programmable. The type is
	// CiscoFlashPartitionStatus.
	CiscoFlashPartitionStatus interface{}

	// Flash partition upgrade method, ie., method by which new files can be
	// downloaded into the partition. FLH stands for Flash Load Helper, a feature
	// provided on run-from-Flash systems for upgrading Flash. This feature uses
	// the bootstrap code in ROMs to help in automatic download. This object
	// should be retrieved if the partition status is runFromFlash(2). If the
	// partition status is readOnly(1), the upgrade method would depend on the
	// reason for the readOnly status. For eg., it may simply be a matter of
	// installing the programming jumper, or it may require execution of a later
	// version of software that supports the Flash chips.  unknown      -  the
	// current system image does not know                 how Flash can be
	// programmed. A possible                 method would be to reload the ROM
	// image                 and perform the upgrade manually. rxbootFLH    -  the
	// Flash Load Helper is available to                 download files to Flash.
	// A copy-to-flash                 command can be used and this system image
	// will automatically reload the Rxboot image                 in ROM and
	// direct it to carry out the                 download request. direct       -
	// will be done directly by this image. The type is
	// CiscoFlashPartitionUpgradeMethod.
	CiscoFlashPartitionUpgradeMethod interface{}

	// Flash partition name used to refer to a partition by the system. This can
	// be any alpha-numeric character string of the form AAAAAAAAnn, where A
	// represents an optional alpha character and n a numeric character. Any
	// numeric characters must always form the trailing part of the string. The
	// system will strip off the alpha characters and use the numeric portion to
	// map to a partition index. Flash operations get directed to a device
	// partition based on this name. The system has a concept of a default
	// partition. This would be the first partition in the device. The system
	// directs an operation to the default partition whenever a partition name is
	// not specified. The partition name is therefore mandatory except when the
	// operation is being done on the default partition, or the device has just
	// one partition (is not partitioned). The type is string with length: 0..16.
	CiscoFlashPartitionName interface{}

	// This object indicates whether a partition requires erasure before any write
	// operations can be done in it. A management station should therefore
	// retrieve this object prior to attempting any write operation. A partition
	// requires erasure after it becomes full free space left is less than or
	// equal to the (filesystem file header size). A partition also requires
	// erasure if the system does not find the existence of any file system when
	// it boots up. The partition may be erased explicitly through the erase(5)
	// command, or by using the copyToFlashWithErase(1) command. If a
	// copyToFlashWithoutErase(2) command is issued when this object has the TRUE
	// value, the command will fail. The type is bool.
	CiscoFlashPartitionNeedErasure interface{}

	// Maximum file name length supported by the file system. Max file name length
	// will depend on the file system implemented. Today, all file systems support
	// a max length of at least 48 bytes. A management entity must use this object
	// when prompting a user for, or deriving the Flash file name length. The type
	// is interface{} with range: 1..256.
	CiscoFlashPartitionFileNameLength interface{}

	// Flash partition size. It should be an integral multiple of
	// ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size
	// will be equal to ciscoFlashDeviceSize.  This object is a 64-bit version of
	// ciscoFlashPartitionSize. The type is interface{} with range:
	// 0..18446744073709551615. Units are bytes.
	CiscoFlashPartitionSizeExtended interface{}

	// Free space within a Flash partition. Note that the actual size of a file in
	// Flash includes a small overhead that represents the file system's file
	// header. Certain file systems may also have a partition or device header
	// overhead to be considered when computing the free space. Free space will be
	// computed as total partition size less size of all existing files
	// (valid/invalid/deleted files and including file header of each file), less
	// size of any partition header, less size of header of next file to be copied
	// in. In short, this object will give the size of the largest file that can
	// be copied in. The management entity will not be expected to know or use any
	// overheads such as file and partition header lengths, since such overheads
	// may vary from file system to file system. Deleted files in Flash do not
	// free up space. A partition may have to be erased in order to reclaim the
	// space occupied by files.  This object is a 64-bit version of
	// ciscoFlashPartitionFreeSpace. The type is interface{} with range:
	// 0..18446744073709551615. Units are bytes.
	CiscoFlashPartitionFreeSpaceExtended interface{}

	// This object specifies the minimum threshold value in percentage of free
	// space for each partition. If the free space available goes below this
	// threshold value and if ciscoFlashPartionLowSpaceNotifEnable is set to true,
	// ciscoFlashPartitionLowSpaceNotif will be generated. When the available free
	// space comes back to the threshold value
	// ciscoFlashPartionLowSpaceRecoveryNotif will be generated. The type is
	// interface{} with range: 0..100.
	CiscoFlashPartitionLowSpaceNotifThreshold interface{}
}

CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry An entry in the table of flash partition properties for each initialized flash partition. Each entry will be indexed by a device number and a partition number within the device.

func (*CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry) GetEntityData 

func (ciscoFlashPartitionEntry *CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm 

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm string

CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm represents values will be added as necessary. 

const (
	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm_simpleChecksum CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm = "simpleChecksum"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm_undefined CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm = "undefined"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm_simpleCRC CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionChecksumAlgorithm = "simpleCRC"
)

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus 

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus string

CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus represents * readWrite if partition is programmable. 

const (
	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus_readOnly CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus = "readOnly"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus_runFromFlash CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus = "runFromFlash"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus_readWrite CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionStatus = "readWrite"
)

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod 

type CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod string

CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod represents direct - will be done directly by this image. 

const (
	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod_unknown CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod = "unknown"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod_rxbootFLH CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod = "rxbootFLH"

	CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod_direct CISCOFLASHMIB_CiscoFlashPartitionTable_CiscoFlashPartitionEntry_CiscoFlashPartitionUpgradeMethod = "direct"
)

type CISCOFLASHMIB_CiscoFlashPartitioningTable 

type CISCOFLASHMIB_CiscoFlashPartitioningTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A Flash partitioning operation entry. Each entry consists of the command,
	// the target device, the partition count, and optionally the partition sizes.
	// A management station wishing to create an entry should first generate a
	// pseudo-random serial number to be used as the index to this sparse table.
	// The station should then create the associated instance of the row status
	// object. It must also, either in the same or in successive PDUs, create the
	// associated instance of the command and parameter objects. It should also
	// modify the default values for any of the parameter objects if the defaults
	// are not appropriate.  Once the appropriate instances of all the command
	// objects have been created, either by an explicit SNMP set request or by
	// default, the row status should be set to active to initiate the operation.
	// Note that this entire procedure may be initiated via a single set request
	// which specifies a row status of createAndGo as well as specifies valid
	// values for the non-defaulted parameter objects.  Once an operation has been
	// activated, it cannot be stopped.  Once the operation completes, the
	// management station should retrieve the value of the status object (and time
	// if desired), and delete the entry.  In order to prevent old entries from
	// clogging the table, entries will be aged out, but an entry will never be
	// deleted within 5 minutes of completing. The type is slice of
	// CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry.
	CiscoFlashPartitioningEntry []*CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry
}

CISCOFLASHMIB_CiscoFlashPartitioningTable A table of Flash partitioning operation entries. Each entry represents a Flash partitioning operation that has been initiated.

func (*CISCOFLASHMIB_CiscoFlashPartitioningTable) GetEntityData 

func (ciscoFlashPartitioningTable *CISCOFLASHMIB_CiscoFlashPartitioningTable) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry 

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Object which specifies a unique entry in the
	// partitioning operations table. A management station wishing to initiate a
	// partitioning operation should use a pseudo-random value for this object
	// when creating or modifying an instance of a ciscoFlashPartitioningEntry.
	// The type is interface{} with range: 0..2147483647.
	CiscoFlashPartitioningSerialNumber interface{}

	// The partitioning command to be executed. Mandatory. If the command is
	// unsupported, the partitioningInvalidOperation error will be reported in the
	// operation status.  Command                 Remarks partition
	// Partition a Flash device.                         All the prerequisites for
	// partitioning must be met for                         this command to
	// succeed.  Command table           Parameters 1) partition
	// PartitioningDestinationName
	// PartitioningPartitionCount
	// PartitioningPartitionSizes (opt)
	// PartitioningNotifyOnCompletion (opt). The type is
	// CiscoFlashPartitioningCommand.
	CiscoFlashPartitioningCommand interface{}

	// Destination device name. This name will be the value obtained from
	// FlashDeviceName. If the name is not specified, the default Flash device
	// will be assumed. The type is string with length: 0..255.
	CiscoFlashPartitioningDestinationName interface{}

	// This object is used to specify the number of partitions to be created. Its
	// value cannot exceed the value of ciscoFlashDeviceMaxPartitions.  To undo
	// partitioning (revert to a single partition), this object must have the
	// value 1. The type is interface{} with range: 1..4294967295.
	CiscoFlashPartitioningPartitionCount interface{}

	// This object is used to explicitly specify the size of each partition to be
	// created. The size of each partition will be in units of
	// ciscoFlashDeviceMinPartitionSize. The value of this object will be in the
	// form:         <part1>:<part2>...:<partn>  If partition sizes are not
	// specified, the system will calculate default sizes based on the partition
	// count, the minimum partition size, and the device size. Partition size need
	// not be specified when undoing partitioning (partition count is 1). If
	// partition sizes are specified, the number of sizes specified must exactly
	// match the partition count. If not, the partitioning command will be
	// rejected with the invalidPartitionSizes error . The type is string.
	CiscoFlashPartitioningPartitionSizes interface{}

	// The status of the specified partitioning operation. partitioningInProgress
	// :         specified operation is active  partitioningOperationSuccess :
	// specified operation is supported and completed         successfully
	// partitioningInvalidOperation :         command invalid or
	// command-protocol-device         combination unsupported
	// partitioningInvalidDestName :         invalid target name (file or
	// partition or         device name) specified
	// partitioningInvalidPartitionCount :         invalid partition count
	// specified for the         partitioning command
	// partitioningInvalidPartitionSizes :         invalid partition size, or
	// invalid count of         partition sizes  partitioningDeviceBusy :
	// specified device is in use and locked by         another process
	// partitioningDeviceOpenError :         invalid device name
	// partitioningDeviceError :         device read, write or erase error
	// partitioningNoMemory :         system running low on memory
	// partitioningUnknownFailure :         failure unknown. The type is
	// CiscoFlashPartitioningStatus.
	CiscoFlashPartitioningStatus interface{}

	// Specifies whether or not a notification should be generated on the
	// completion of the partitioning operation. If specified,
	// ciscoFlashPartitioningCompletionTrap will be generated. It is the
	// responsibility of the management entity to ensure that the SNMP
	// administrative model is configured in such a way as to allow the
	// notification to be delivered. The type is bool.
	CiscoFlashPartitioningNotifyOnCompletion interface{}

	// Time taken for the operation. This object will be like a stopwatch,
	// starting when the operation starts, stopping when the operation completes.
	// If a management entity keeps a database of completion times for various
	// operations, it can then use the stopwatch capability to display percentage
	// completion time. The type is interface{} with range: 0..4294967295.
	CiscoFlashPartitioningTime interface{}

	// The status of this table entry. The type is RowStatus.
	CiscoFlashPartitioningEntryStatus interface{}
}

CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry A Flash partitioning operation entry. Each entry consists of the command, the target device, the partition count, and optionally the partition sizes.

A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate.

Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects.

Once an operation has been activated, it cannot be stopped.

Once the operation completes, the management station should retrieve the value of the status object (and time if desired), and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.

func (*CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry) GetEntityData 

func (ciscoFlashPartitioningEntry *CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry) GetEntityData() *types.CommonEntityData

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningCommand 

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningCommand string

CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningCommand represents PartitioningNotifyOnCompletion (opt) 

const (
	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningCommand_partition CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningCommand = "partition"
)

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus 

type CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus string

CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus represents failure unknown 

const (
	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningInProgress CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningInProgress"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningOperationSuccess CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningOperationSuccess"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningInvalidOperation CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningInvalidOperation"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningInvalidDestName CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningInvalidDestName"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningInvalidPartitionCount CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningInvalidPartitionCount"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningInvalidPartitionSizes CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningInvalidPartitionSizes"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningDeviceBusy CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningDeviceBusy"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningDeviceOpenError CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningDeviceOpenError"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningDeviceError CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningDeviceError"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningNoMemory CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningNoMemory"

	CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus_partitioningUnknownFailure CISCOFLASHMIB_CiscoFlashPartitioningTable_CiscoFlashPartitioningEntry_CiscoFlashPartitioningStatus = "partitioningUnknownFailure"
)

type FlashFileType 

type FlashFileType string

FlashFileType represents crashinfo - file containing crashinfo. 

const (
	FlashFileType_unknown FlashFileType = "unknown"

	FlashFileType_config FlashFileType = "config"

	FlashFileType_image FlashFileType = "image"

	FlashFileType_directory FlashFileType = "directory"

	FlashFileType_crashinfo FlashFileType = "crashinfo"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.