docs_cable_device_mib

package
v0.0.0-...-50def94 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2023 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This is the MIB Module for DOCSIS-compliant cable modems and cable-modem termination systems.

Copyright (C) The IETF Trust (2006). This version of this MIB module was published in RFC 4639; for full legal notices see the RFC itself.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type DOCSCABLEDEVICEMIB 

type DOCSCABLEDEVICEMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	DocsDevBase DOCSCABLEDEVICEMIB_DocsDevBase

	DocsDevSoftware DOCSCABLEDEVICEMIB_DocsDevSoftware

	DocsDevServer DOCSCABLEDEVICEMIB_DocsDevServer

	DocsDevEvent DOCSCABLEDEVICEMIB_DocsDevEvent

	DocsDevFilter DOCSCABLEDEVICEMIB_DocsDevFilter

	DocsDevCpe DOCSCABLEDEVICEMIB_DocsDevCpe

	// This table controls access to SNMP objects by network management stations.
	// If the table is empty, access to SNMP objects is unrestricted.  The objects
	// in this table MUST NOT persist across reboots.  The objects in this table
	// are only accessible from cable devices that are not capable of operating in
	// SNMP Coexistence mode (RFC 3584) or in SNMPv3 mode (RFC 3410). See the
	// conformance section for details.  Note that some devices are required by
	// other specifications (e.g., the DOCSIS OSSIv1.1 specification) to support
	// the legacy SNMPv1/v2c docsDevNmAccess mode for backward compatibility.
	// This table is deprecated.  Instead, use the SNMP coexistence MIBs from RFC
	// 3584, the TARGET and NOTIFICATION MIBs from RFC 3413, and the View-Based
	// Access Control Model (VACM) MIBs for all SNMP protocol versions from RFC
	// 3415.
	DocsDevNmAccessTable DOCSCABLEDEVICEMIB_DocsDevNmAccessTable

	// This table allows control of the reporting of event classes.  For each
	// event priority, a combination of logging and reporting mechanisms may be
	// chosen.  The mapping of event types to priorities is vendor dependent.
	// Vendors may also choose to allow the user to control that mapping through
	// proprietary means.  Table entries MUST persist across reboots for CMTS
	// devices and MUST NOT persist across reboots for CM devices.
	DocsDevEvControlTable DOCSCABLEDEVICEMIB_DocsDevEvControlTable

	// Contains a log of network and device events that may be of interest in
	// fault isolation and troubleshooting. If the local(0) bit is set in
	// docsDevEvReporting, entries in this table MUST persist across reboots.
	DocsDevEventTable DOCSCABLEDEVICEMIB_DocsDevEventTable

	// A list of filters to apply to (bridged) LLC traffic. The filters in this
	// table are applied to incoming traffic on the appropriate interface(s)
	// prior to any further processing (e.g., before the packet is handed off for
	// level 3 processing, or for bridging). The specific action taken when no
	// filter is matched is controlled by docsDevFilterLLCUnmatchedAction.  Table
	// entries MUST NOT persist across reboots for any device.
	DocsDevFilterLLCTable DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable

	// An ordered list of filters or classifiers to apply to IP traffic. Filter
	// application is ordered by the filter index, rather than by a best match
	// algorithm (Note that this implies that the filter table may have gaps in
	// the index values).  Packets that match no filters will have policy 0 in the
	// docsDevFilterPolicyTable applied to them, if it exists.  Otherwise, Packets
	// that match no filters are discarded or forwarded according to the setting
	// of docsDevFilterIpDefault.  Any IP packet can theoretically match multiple
	// rows of this table.  When considering a packet, the table is scanned in row
	// index order (e.g., filter 10 is checked before filter 20).  If the packet
	// matches that filter (which means that it matches ALL criteria for that
	// row), actions appropriate to docsDevFilterIpControl and
	// docsDevFilterPolicyId are taken.  If the packet was discarded processing is
	// complete.  If docsDevFilterIpContinue is set to true, the filter comparison
	// continues with the next row in the table, looking for additional matches.
	// If the packet matches no filter in the table, the packet is accepted or
	// dropped for further processing according to the setting of
	// docsDevFilterIpDefault. If the packet is accepted, the actions specified by
	// policy group 0 (e.g., the rows in docsDevFilterPolicyTable that have a
	// value of 0 for docsDevFilterPolicyId) are taken, if that policy group
	// exists.  Logically, this table is consulted twice during the processing of
	// any IP packet: once upon its acceptance from the L2 entity, and once upon
	// its transmission to the L2 entity.  In actuality, for cable modems, IP
	// filtering is generally the only IP processing done for transit traffic.
	// This means that inbound and outbound filtering can generally be done at the
	// same time with one pass through the filter table.  The objects in this
	// table are only accessible from cable devices that are not operating in
	// DiffServ MIB mode (RFC 3289).  See the conformance section for details.
	// Note that some devices are required by other specifications (e.g., the
	// DOCSIS OSSIv1.1 specification) to support the legacy SNMPv1/v2c
	// docsDevFilter mode for backward compatibility.  Table entries MUST NOT
	// persist across reboots for any device.  This table is deprecated.  Instead,
	// use the DiffServ MIB from RFC3289.
	DocsDevFilterIpTable DOCSCABLEDEVICEMIB_DocsDevFilterIpTable

	// A Table that maps between a policy group ID and a set of pointers to
	// policies to be applied.  All rows with the same docsDevFilterPolicyId are
	// part of the same group of policy pointers and are applied in the order in
	// this table.  docsDevFilterPolicyTable exists to allow multiple policy
	// actions (referenced by policy pointers) to be applied to any given
	// classified packet. The policy actions are applied in index order. For
	// example:  Index   ID    Type    Action  1      1      TOS     1  9      5
	// TOS     1  12     1      IPSEC   3  This says that a packet that matches a
	// filter with policy id 1 first has TOS policy 1 applied (which might set the
	// TOS bits to enable a higher priority) and next has the IPSEC policy 3
	// applied (which may result in the packets being dumped into a secure VPN to
	// a remote encryptor).  Policy ID 0 is reserved for default actions and is
	// applied only to packets that match no filters in docsDevFilterIpTable.
	// Table entries MUST NOT persist across reboots for any device.  This table
	// is deprecated.  Instead, use the DiffServ MIB from RFC3289.
	DocsDevFilterPolicyTable DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable

	// Table used to describe Type of Service (TOS) bits processing.  This table
	// is an adjunct to the docsDevFilterIpTable and the docsDevFilterPolicy
	// table.  Entries in the latter table can point to specific rows in this (and
	// other) tables and cause specific actions to be taken. This table permits
	// the manipulation of the value of the Type of Service bits in the IP header
	// of the matched packet as follows:  Set the tosBits of the packet to
	// (tosBits & docsDevFilterTosAndMask) |    docsDevFilterTosOrMask  This
	// construct allows you to do a clear and set of all the TOS bits in a
	// flexible manner.  Table entries MUST NOT persist across reboots for any
	// device.  This table is deprecated.  Instead, use the DiffServ MIB from
	// RFC3289.
	DocsDevFilterTosTable DOCSCABLEDEVICEMIB_DocsDevFilterTosTable

	// This table lists the IPv4 addresses seen (or permitted) as source addresses
	// in packets originating from the customer interface on this device.  In
	// addition, this table can be provisioned with the specific addresses
	// permitted for the CPEs via the normal row creation mechanisms.  Table
	// entries MUST NOT persist across reboots for any device.  N.B.  Management
	// action can add entries in this table and in docsDevCpeIpTable past the
	// value of docsDevCpeIpMax.  docsDevCpeIpMax ONLY restricts the ability of
	// the CM to add learned addresses automatically.  This table is deprecated
	// and is replaced by docsDevCpeInetTable.
	DocsDevCpeTable DOCSCABLEDEVICEMIB_DocsDevCpeTable

	// This table lists the IP addresses seen (or permitted) as source addresses
	// in packets originating from the customer interface on this device.  In
	// addition, this table can be provisioned with the specific addresses
	// permitted for the CPEs via the normal row creation mechanisms.  N.B.
	// Management action can add entries in this table and in docsDevCpeIpTable
	// past the value of docsDevCpeIpMax.  docsDevCpeIpMax ONLY restricts the
	// ability of the CM to add learned addresses automatically.  Table entries
	// MUST NOT persist across reboots for any device.  This table exactly mirrors
	// docsDevCpeTable and applies to IPv4 and IPv6 addresses.
	DocsDevCpeInetTable DOCSCABLEDEVICEMIB_DocsDevCpeInetTable
}

DOCSCABLEDEVICEMIB

func (*DOCSCABLEDEVICEMIB) GetEntityData 

func (dOCSCABLEDEVICEMIB *DOCSCABLEDEVICEMIB) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevBase 

type DOCSCABLEDEVICEMIB_DocsDevBase struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Defines the current role of this device.  cm(1) is a Cable Modem,
	// cmtsActive(2) is a Cable Modem Termination System that is controlling the
	// system of cable modems, and cmtsBackup(3) is a CMTS that is currently
	// connected but is not controlling the system (not currently used).  In
	// general, if this device is a 'cm', its role will not change during
	// operation or between reboots.  If the device is a 'cmts' it may change
	// between cmtsActive and cmtsBackup and back again during normal operation.
	// NB: At this time, the DOCSIS standards do not support the concept of a
	// backup CMTS, but cmtsBackup is included for completeness. The type is
	// DocsDevRole.
	DocsDevRole interface{}

	// The current date and time, with time zone information (if known).  If the
	// real data and time cannot be determined, this shall represent elapsed time
	// from boot relative to the standard epoch '1970-1-1,0:0:0.0'.  In other
	// words, if this agent has been up for 3 minutes and not been able to
	// determine what the actual date and time are, this object will return the
	// value '1970-1-1,0:03:0.0'. The type is string.
	DocsDevDateTime interface{}

	// Setting this object to true(1) causes the device to reset.  Reading this
	// object always returns false(2). The type is bool.
	DocsDevResetNow interface{}

	// The manufacturer's serial number for this device. The type is string.
	DocsDevSerialNumber interface{}

	// This object controls operation of the spanning tree protocol (as
	// distinguished from transparent bridging).  If set to stEnabled(1), then the
	// spanning tree protocol is enabled, subject to bridging constraints. If
	// noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs
	// received are discarded.  If noStPassBpdu(3), then spanning tree is not
	// active, and Bridge PDUs are transparently forwarded.  Note that a device
	// need not implement all of these options, but that noStFilterBpdu(2) is
	// required. The type is DocsDevSTPControl.
	DocsDevSTPControl interface{}

	// This object controls the IGMP mode of operation for the CM or CMTS.  In
	// passive mode, the device forwards IGMP between interfaces as based on
	// knowledge of Multicast Session activity on the subscriber side interface
	// and the rules defined in the DOCSIS RFI specification.  In active mode, the
	// device terminates at and initiates IGMP through its interfaces as based on
	// the knowledge of Multicast Session activity on the subscriber side
	// interface. The type is DocsDevIgmpModeControl.
	DocsDevIgmpModeControl interface{}

	// The maximum number of CPEs that can be granted access through a CM during a
	// CM epoch.  This value can be obtained from the CM configuration file;
	// however, it may be adjusted by the CM according to hardware or software
	// limitations that have been imposed on the implementation. The type is
	// interface{} with range: 0..255. Units are CPEs.
	DocsDevMaxCpe interface{}
}

DOCSCABLEDEVICEMIB_DocsDevBase

func (*DOCSCABLEDEVICEMIB_DocsDevBase) GetEntityData 

func (docsDevBase *DOCSCABLEDEVICEMIB_DocsDevBase) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl 

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl string

DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl represents subscriber side interface. 

const (
	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl_passive DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl = "passive"

	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl_active DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevIgmpModeControl = "active"
)

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole 

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole string

DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole represents completeness. 

const (
	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole_cm DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole = "cm"

	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole_cmtsActive DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole = "cmtsActive"

	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole_cmtsBackup DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevRole = "cmtsBackup"
)

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl 

type DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl string

DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl represents options, but that noStFilterBpdu(2) is required. 

const (
	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl_stEnabled DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl = "stEnabled"

	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl_noStFilterBpdu DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl = "noStFilterBpdu"

	DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl_noStPassBpdu DOCSCABLEDEVICEMIB_DocsDevBase_DocsDevSTPControl = "noStPassBpdu"
)

type DOCSCABLEDEVICEMIB_DocsDevCpe 

type DOCSCABLEDEVICEMIB_DocsDevCpe struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object controls the population of docsDevFilterCpeTable. If set to
	// none, the filters must be set manually by a network management action
	// (either configuration or SNMP set). If set to any, the CM wiretaps the
	// packets originating from the ethernet and enrolls up to docsDevCpeIpMax
	// addresses as based on the source IPv4 or v6 addresses of those packets. The
	// type is DocsDevCpeEnroll.
	DocsDevCpeEnroll interface{}

	// This object controls the maximum number of CPEs allowed to be learned
	// behind this device. If set to zero, any number of CPEs may connect up to
	// the maximum permitted for the device. If set to -1, no filtering is done on
	// CPE source addresses, and no entries are made in the docsDevFilterCpeTable
	// via learning.  If an attempt is made to set this to a number greater than
	// that permitted for the device, it is set to that maximum. The type is
	// interface{} with range: -1..2147483647.
	DocsDevCpeIpMax interface{}
}

DOCSCABLEDEVICEMIB_DocsDevCpe

func (*DOCSCABLEDEVICEMIB_DocsDevCpe) GetEntityData 

func (docsDevCpe *DOCSCABLEDEVICEMIB_DocsDevCpe) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable 

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the docsDevFilterCpeInetTable. There is one entry for each IP
	// CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is
	// ignored; otherwise, upon receipt of an IP packet from the customer
	// interface of the CM, the source IP address is checked against this table.
	// If the address is in the table, packet processing continues.  If the
	// address is not in the table but docsDevCpeEnroll is set to any and the sum
	// of the table sizes for docsDevCpeTable and docsDevCpeInetTable is less than
	// docsDevCpeIpMax, the address is added to the table, and packet processing
	// continues.  Otherwise, the packet is dropped.  The filtering actions
	// specified by this table occur after any LLC filtering
	// (docsDevFilterLLCTable), but prior to any IP filtering
	// (docsDevFilterIpTable, docsDevNmAccessTable).  When an agent (cable modem)
	// restarts, then all dynamically created rows are lost. The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry.
	DocsDevCpeInetEntry []*DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry
}

DOCSCABLEDEVICEMIB_DocsDevCpeInetTable This table lists the IP addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, this table can be provisioned with the specific addresses permitted for the CPEs via the normal row creation mechanisms.

N.B. Management action can add entries in this table and in docsDevCpeIpTable past the value of docsDevCpeIpMax. docsDevCpeIpMax ONLY restricts the ability of the CM to add learned addresses automatically.

Table entries MUST NOT persist across reboots for any device.

This table exactly mirrors docsDevCpeTable and applies to IPv4 and IPv6 addresses.

func (*DOCSCABLEDEVICEMIB_DocsDevCpeInetTable) GetEntityData 

func (docsDevCpeInetTable *DOCSCABLEDEVICEMIB_DocsDevCpeInetTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry 

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type of internet address of
	// docsDevCpeInetAddr. The type is InetAddressType.
	DocsDevCpeInetType interface{}

	// This attribute is a key. The Internet address to which this entry applies.
	// Implementors need to be aware that if the size of docsDevCpeInetAddr
	// exceeds 114 octets OIDs of instances of columns in this row will have more
	// than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
	// SNMPv3.  Only unicast address are allowed for this object. The type is
	// string with length: 0..255.
	DocsDevCpeInetAddr interface{}

	// This object describes how this entry was created.  If the value is
	// manual(2), this row was created by a network management action (either
	// configuration or SNMP set).  If set to learned(3), then it was found via
	// looking at the source IP address of a received packet. The type is
	// DocsDevCpeInetSource.
	DocsDevCpeInetSource interface{}

	// Standard object to manipulate rows.  To create a row in this table, one
	// only needs to specify this object. Management stations SHOULD use the
	// create-and-go mechanism for creating rows in this table. The type is
	// RowStatus.
	DocsDevCpeInetRowStatus interface{}
}

DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry An entry in the docsDevFilterCpeInetTable. There is one entry for each IP CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is ignored; otherwise, upon receipt of an IP packet from the customer interface of the CM, the source IP address is checked against this table. If the address is in the table, packet processing continues. If the address is not in the table but docsDevCpeEnroll is set to any and the sum of the table sizes for docsDevCpeTable and docsDevCpeInetTable is less than docsDevCpeIpMax, the address is added to the table, and packet processing continues. Otherwise, the packet is dropped.

The filtering actions specified by this table occur after any LLC filtering (docsDevFilterLLCTable), but prior to any IP filtering (docsDevFilterIpTable, docsDevNmAccessTable).

When an agent (cable modem) restarts, then all dynamically created rows are lost.

func (*DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry) GetEntityData 

func (docsDevCpeInetEntry *DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource 

type DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource string

DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource represents packet. 

const (
	DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource_manual DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource = "manual"

	DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource_learned DOCSCABLEDEVICEMIB_DocsDevCpeInetTable_DocsDevCpeInetEntry_DocsDevCpeInetSource = "learned"
)

type DOCSCABLEDEVICEMIB_DocsDevCpeTable 

type DOCSCABLEDEVICEMIB_DocsDevCpeTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the docsDevFilterCpeTable.  There is one entry for each IPv4
	// CPE seen or provisioned.  If docsDevCpeIpMax is set to -1, this table is
	// ignored; otherwise, upon receipt of an IP packet from the customer
	// interface of the CM, the source IP address is checked against this table.
	// If the address is in the table, packet processing continues.  If the
	// address is not in the table but docsDevCpeEnroll is set to any and the sum
	// of the table sizes of docsDevCpeTable and docsDevCpeInetTable is less than
	// docsDevCpeIpMax, the address is added to the table, and packet processing
	// continues.  Otherwise, the packet is dropped.  The filtering actions
	// specified by this table occur after any LLC filtering
	// (docsDevFilterLLCTable), but prior to any IP filtering
	// (docsDevFilterIpTable, docsDevNmAccessTable). The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry.
	DocsDevCpeEntry []*DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry
}

DOCSCABLEDEVICEMIB_DocsDevCpeTable This table lists the IPv4 addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, this table can be provisioned with the specific addresses permitted for the CPEs via the normal row creation mechanisms. Table entries MUST NOT persist across reboots for any device.

N.B. Management action can add entries in this table and in docsDevCpeIpTable past the value of docsDevCpeIpMax. docsDevCpeIpMax ONLY restricts the ability of the CM to add learned addresses automatically.

This table is deprecated and is replaced by docsDevCpeInetTable.

func (*DOCSCABLEDEVICEMIB_DocsDevCpeTable) GetEntityData 

func (docsDevCpeTable *DOCSCABLEDEVICEMIB_DocsDevCpeTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry 

type DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The IPv4 address to which this entry applies.
	// N.B.  Attempts to set all zeros or all ones address values MUST be
	// rejected. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevCpeIp interface{}

	// This object describes how this entry was created.  If the value is
	// manual(2), this row was created by a network management action (either
	// configuration or SNMP set).  If set to learned(3), then it was found via
	// looking at the source IPv4 address of a received packet. The value other(1)
	// is used for any entries that do not meet manual(2) or learned(3) criteria.
	// The type is DocsDevCpeSource.
	DocsDevCpeSource interface{}

	// Standard object to manipulate rows.  To create a row in this table, one
	// only needs to specify this object. Management stations SHOULD use the
	// create-and-go mechanism for creating rows in this table. The type is
	// RowStatus.
	DocsDevCpeStatus interface{}
}

DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry An entry in the docsDevFilterCpeTable. There is one entry for each IPv4 CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is ignored; otherwise, upon receipt of an IP packet from the customer interface of the CM, the source IP address is checked against this table. If the address is in the table, packet processing continues. If the address is not in the table but docsDevCpeEnroll is set to any and the sum of the table sizes of docsDevCpeTable and docsDevCpeInetTable is less than docsDevCpeIpMax, the address is added to the table, and packet processing continues. Otherwise, the packet is dropped.

The filtering actions specified by this table occur after any LLC filtering (docsDevFilterLLCTable), but prior to any IP filtering (docsDevFilterIpTable, docsDevNmAccessTable).

func (*DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry) GetEntityData 

func (docsDevCpeEntry *DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource 

type DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource string

DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource represents meet manual(2) or learned(3) criteria. 

const (
	DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource_other DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource = "other"

	DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource_manual DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource = "manual"

	DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource_learned DOCSCABLEDEVICEMIB_DocsDevCpeTable_DocsDevCpeEntry_DocsDevCpeSource = "learned"
)

type DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll 

type DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll string

DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll represents those packets. 

const (
	DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll_none DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll = "none"

	DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll_any DOCSCABLEDEVICEMIB_DocsDevCpe_DocsDevCpeEnroll = "any"
)

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable 

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Allows configuration of the reporting mechanisms for a particular event
	// priority. The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry.
	DocsDevEvControlEntry []*DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry
}

DOCSCABLEDEVICEMIB_DocsDevEvControlTable This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. The mapping of event types to priorities is vendor dependent. Vendors may also choose to allow the user to control that mapping through proprietary means. Table entries MUST persist across reboots for CMTS devices and MUST NOT persist across reboots for CM devices.

func (*DOCSCABLEDEVICEMIB_DocsDevEvControlTable) GetEntityData 

func (docsDevEvControlTable *DOCSCABLEDEVICEMIB_DocsDevEvControlTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry 

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The priority level that is controlled by this
	// entry. These are ordered from most (emergency) to least (debug) critical.
	// Each event with a CM or CMTS has a particular priority level associated
	// with it (as defined by the vendor).  emergency(1) events indicate
	// vendor-specific fatal hardware or software errors that prevent normal
	// system operation.  alert(2) events indicate a serious failure that causes
	// the reporting system to reboot but is not caused by hardware or software
	// malfunctioning.  critical(3) events indicate a serious failure that
	// requires attention and prevents the device from transmitting data but that
	// could be recovered without rebooting the system.  error(4) and warning(5)
	// events indicate that a failure occurred that could interrupt the normal
	// data flow but that does not cause the device to re-register.  notice(6) and
	// information(7) events indicate a milestone or checkpoint in normal
	// operation that could be of particular importance for troubleshooting.
	// debug(8) events are reserved for vendor-specific events.  During normal
	// operation, no event more critical than notice(6) should be generated.
	// Events between warning and emergency should be generated at appropriate
	// levels of problems (e.g., emergency when the box is about to crash). The
	// type is DocsDevEvPriority.
	DocsDevEvPriority interface{}

	// Defines the action to be taken on occurrence of this event class.
	// Implementations may not necessarily support all options for all event
	// classes but at minimum must allow traps and syslogging to be disabled.  If
	// the local(0) bit is set, then log to the internal log and update
	// non-volatile store, for backward compatibility with the original RFC 2669
	// definition. If the traps(1) bit is set, then generate an SNMP trap; if the
	// syslog(2) bit is set, then send a syslog message (assuming that the syslog
	// address is set).  If the localVolatile(8) bit is set, then log to the
	// internal log without updating non-volatile store.  If the stdInterface(9)
	// bit is set, then the agent ignores all other bits except the local(0),
	// syslog(2), and localVolatile(8) bits.  Setting the stdInterface(9) bit
	// indicates that RFC3413 and RFC3014 are being used to control event
	// reporting mechanisms. The type is string.
	DocsDevEvReporting interface{}
}

DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry Allows configuration of the reporting mechanisms for a particular event priority.

func (*DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry) GetEntityData 

func (docsDevEvControlEntry *DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority 

type DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority string

DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority represents box is about to crash). 

const (
	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_emergency DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "emergency"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_alert DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "alert"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_critical DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "critical"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_error_ DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "error"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_warning DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "warning"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_notice DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "notice"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_information DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "information"

	DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority_debug DOCSCABLEDEVICEMIB_DocsDevEvControlTable_DocsDevEvControlEntry_DocsDevEvPriority = "debug"
)

type DOCSCABLEDEVICEMIB_DocsDevEvent 

type DOCSCABLEDEVICEMIB_DocsDevEvent struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Setting this object to resetLog(1) empties the event log.  All data is
	// deleted.  Setting it to useDefaultReporting(2) returns all event priorities
	// to their factory-default reporting.  Reading this object always returns
	// useDefaultReporting(2). The type is DocsDevEvControl.
	DocsDevEvControl interface{}

	// The IP address of the Syslog server. If 0.0.0.0, either syslog transmission
	// is inhibited, or the Syslog server address is not an IPv4 address.  This
	// object is deprecated and is replaced by docsDevEvSyslogAddress. The type is
	// string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevEvSyslog interface{}

	// Controls the transmission of traps and syslog messages with respect to the
	// trap pacing threshold.  unconstrained(1) causes traps and syslog messages
	// to be transmitted without regard to the threshold settings.
	// maintainBelowThreshold(2) causes trap transmission and syslog messages to
	// be suppressed if the number of traps would otherwise exceed the threshold.
	// stopAtThreshold(3) causes trap transmission to cease at the threshold and
	// not to resume until directed to do so.  inhibited(4) causes all trap
	// transmission and syslog messages to be suppressed.  A single event is
	// always treated as a single event for threshold counting.  That is, an event
	// causing both a trap and a syslog message is still treated as a single
	// event.  Writing to this object resets the thresholding state. The type is
	// DocsDevEvThrottleAdminStatus.
	DocsDevEvThrottleAdminStatus interface{}

	// If true(1), trap and syslog transmission is currently inhibited due to
	// thresholds and/or the current setting of docsDevEvThrottleAdminStatus.  In
	// addition, this is true(1) when transmission is inhibited because no syslog
	// (docsDevEvSyslog) or trap (docsDevNmAccessEntry) destinations have been
	// set.  This object is deprecated and is replaced by
	// docsDevEvThrottleThresholdExceeded. The type is bool.
	DocsDevEvThrottleInhibited interface{}

	// Number of events per docsDevEvThrottleInterval permitted before throttling
	// is to occur.  A single event, whether the notification could result in
	// messages transmitted using syslog, SNMP, or both protocols, and regardless
	// of the number of destinations, (including zero) is always treated as a
	// single event for threshold counting.  For example, an event causing both a
	// trap and a syslog message is still treated as a single event.  All system
	// notifications that occur within the device should be taken into
	// consideration when calculating and monitoring the threshold. The type is
	// interface{} with range: 0..4294967295. Units are events.
	DocsDevEvThrottleThreshold interface{}

	// The interval over which docsDevEvThrottleThreshold applies. The type is
	// interface{} with range: 1..2147483647. Units are seconds.
	DocsDevEvThrottleInterval interface{}

	// The type of address of docsDevEvSyslogAddress.  If no syslog server exists,
	// this value should return unknown(0). The type is InetAddressType.
	DocsDevEvSyslogAddressType interface{}

	// The Internet address of the Syslog server, as provided by DHCP option 7 or
	// set via SNMP management.  If the address of the server is set to the
	// zero-length string, the 0.0.0.0 IPv4 address, or the 0: IPv6 address,
	// Syslog transmission is inhibited.  Note that if multiple values are
	// provided to the CM in DHCP option 7, the value of this MIB object MUST be
	// the first Syslog server address received.  By default at agent boot, this
	// object returns the zero length string. The type is string with length:
	// 0..255.
	DocsDevEvSyslogAddress interface{}

	// If true(1), trap and syslog transmission is currently inhibited due to
	// exceeding the trap/syslog event threshold in the current interval. The type
	// is bool.
	DocsDevEvThrottleThresholdExceeded interface{}
}

DOCSCABLEDEVICEMIB_DocsDevEvent

func (*DOCSCABLEDEVICEMIB_DocsDevEvent) GetEntityData 

func (docsDevEvent *DOCSCABLEDEVICEMIB_DocsDevEvent) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevEventTable 

type DOCSCABLEDEVICEMIB_DocsDevEventTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Describes a network or device event that may be of interest in fault
	// isolation and troubleshooting. Multiple sequential identical events are
	// represented by incrementing docsDevEvCounts and setting docsDevEvLastTime
	// to the current time rather than creating multiple rows.  Entries are
	// created with the first occurrence of an event.  docsDevEvControl can be
	// used to clear the table.  Individual events cannot be deleted. The type is
	// slice of DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry.
	DocsDevEventEntry []*DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry
}

DOCSCABLEDEVICEMIB_DocsDevEventTable Contains a log of network and device events that may be of interest in fault isolation and troubleshooting. If the local(0) bit is set in docsDevEvReporting, entries in this table MUST persist across reboots.

func (*DOCSCABLEDEVICEMIB_DocsDevEventTable) GetEntityData 

func (docsDevEventTable *DOCSCABLEDEVICEMIB_DocsDevEventTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry 

type DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Provides relative ordering of the objects in the
	// event log. This object will always increase except when (a) the log is
	// reset via docsDevEvControl, (b) the device reboots and does not implement
	// non-volatile storage for this log, or (c) it reaches the value 2^31.  The
	// next entry for all the above cases is 1. The type is interface{} with
	// range: 1..2147483647.
	DocsDevEvIndex interface{}

	// The value of docsDevDateTime at the time this entry was created. The type
	// is string.
	DocsDevEvFirstTime interface{}

	// When an entry reports only one event, this object will have the same value
	// as the corresponding instance of docsDevEvFirstTime.  When an entry reports
	// multiple events, this object will record the value that docsDevDateTime had
	// when the most recent event for this entry occurred. The type is string.
	DocsDevEvLastTime interface{}

	// The number of consecutive event instances reported by this entry.  This
	// starts at 1 with the creation of this row and increments by 1 for each
	// subsequent duplicate event. The type is interface{} with range:
	// 0..4294967295. Units are events.
	DocsDevEvCounts interface{}

	// The priority level of this event, as defined by the vendor.  These are
	// ordered from most serious (emergency) to least serious (debug).
	// emergency(1) events indicate vendor-specific fatal hardware or software
	// errors that prevent normal system operation.  alert(2) events indicate a
	// serious failure that causes the reporting system to reboot but that is not
	// caused by hardware or software malfunctioning.  critical(3) events indicate
	// a serious failure that requires attention and prevents the device from
	// transmitting data but that could be recovered without rebooting the system.
	// error(4) and warning(5) events indicate that a failure occurred that could
	// interrupt the normal data flow but that does not cause the device to
	// re-register.  notice(6) and information(7) events indicate a milestone or
	// checkpoint in normal operation that could be of particular importance for
	// troubleshooting.  debug(8) events are reserved for vendor-specific events.
	// During normal operation, no event more critical than notice(6) should be
	// generated.  Events between warning and emergency should be generated at
	// appropriate levels of problems (e.g., emergency when the box is about to
	// crash). The type is DocsDevEvLevel.
	DocsDevEvLevel interface{}

	// For this product, uniquely identifies the type of event that is reported by
	// this entry. The type is interface{} with range: 0..4294967295.
	DocsDevEvId interface{}

	// Provides a human-readable description of the event, including all relevant
	// context (interface numbers, etc.). The type is string.
	DocsDevEvText interface{}
}

DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by incrementing docsDevEvCounts and setting docsDevEvLastTime to the current time rather than creating multiple rows.

Entries are created with the first occurrence of an event. docsDevEvControl can be used to clear the table. Individual events cannot be deleted.

func (*DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry) GetEntityData 

func (docsDevEventEntry *DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel 

type DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel string

DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel represents box is about to crash). 

const (
	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_emergency DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "emergency"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_alert DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "alert"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_critical DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "critical"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_error_ DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "error"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_warning DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "warning"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_notice DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "notice"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_information DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "information"

	DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel_debug DOCSCABLEDEVICEMIB_DocsDevEventTable_DocsDevEventEntry_DocsDevEvLevel = "debug"
)

type DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl 

type DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl string

DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl represents always returns useDefaultReporting(2). 

const (
	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl_resetLog DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl = "resetLog"

	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl_useDefaultReporting DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvControl = "useDefaultReporting"
)

type DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus 

type DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus string

DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus represents Writing to this object resets the thresholding state. 

const (
	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus_unconstrained DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus = "unconstrained"

	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus_maintainBelowThreshold DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus = "maintainBelowThreshold"

	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus_stopAtThreshold DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus = "stopAtThreshold"

	DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus_inhibited DOCSCABLEDEVICEMIB_DocsDevEvent_DocsDevEvThrottleAdminStatus = "inhibited"
)

type DOCSCABLEDEVICEMIB_DocsDevFilter 

type DOCSCABLEDEVICEMIB_DocsDevFilter struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// LLC (Link Level Control) filters can be defined on an inclusive or
	// exclusive basis: CMs can be configured to forward only packets matching a
	// set of layer three protocols, or to drop packets matching a set of layer
	// three protocols.  Typical use of these filters is to filter out possibly
	// harmful (given the context of a large metropolitan LAN) protocols.  If set
	// to discard(1), any L2 packet that does not match at least one filter in the
	// docsDevFilterLLCTable will be discarded.  If set to accept(2), any L2
	// packet that does not match at least one filter in the docsDevFilterLLCTable
	// will be accepted for further processing (e.g., bridging).  In other words,
	// if the packet does not match an entry in the table, it takes this action;
	// if it does match an entry in the table, it takes the opposite of this
	// action. The type is DocsDevFilterLLCUnmatchedAction.
	DocsDevFilterLLCUnmatchedAction interface{}

	// The default behavior for (bridged) packets that do not match IP filters (or
	// Internet filters, if implemented) is defined by docsDevFilterIpDefault.  If
	// set to discard(1), all packets not matching an IP filter in
	// docsDevFilterIpTable will be discarded.  If set to accept(2), all packets
	// not matching an IP filter or an Internet filter will be accepted for
	// further processing (e.g., bridging). The type is DocsDevFilterIpDefault.
	DocsDevFilterIpDefault interface{}
}

DOCSCABLEDEVICEMIB_DocsDevFilter

func (*DOCSCABLEDEVICEMIB_DocsDevFilter) GetEntityData 

func (docsDevFilter *DOCSCABLEDEVICEMIB_DocsDevFilter) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable 

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Describes a filter to apply to IP traffic received on a specified
	// interface.  All identity objects in this table (e.g., source and
	// destination address/mask, protocol, source/dest port, TOS/mask, interface
	// and direction) must match their respective fields in the packet for any
	// given filter to match.  To create an entry in this table,
	// docsDevFilterIpIfIndex must be specified. The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry.
	DocsDevFilterIpEntry []*DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry
}

DOCSCABLEDEVICEMIB_DocsDevFilterIpTable An ordered list of filters or classifiers to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm (Note that this implies that the filter table may have gaps in the index values). Packets that match no filters will have policy 0 in the docsDevFilterPolicyTable applied to them, if it exists. Otherwise, Packets that match no filters are discarded or forwarded according to the setting of docsDevFilterIpDefault.

Any IP packet can theoretically match multiple rows of this table. When considering a packet, the table is scanned in row index order (e.g., filter 10 is checked before filter 20). If the packet matches that filter (which means that it matches ALL criteria for that row), actions appropriate to docsDevFilterIpControl and docsDevFilterPolicyId are taken. If the packet was discarded processing is complete. If docsDevFilterIpContinue is set to true, the filter comparison continues with the next row in the table, looking for additional matches.

If the packet matches no filter in the table, the packet is accepted or dropped for further processing according to the setting of docsDevFilterIpDefault. If the packet is accepted, the actions specified by policy group 0 (e.g., the rows in docsDevFilterPolicyTable that have a value of 0 for docsDevFilterPolicyId) are taken, if that policy group exists.

Logically, this table is consulted twice during the processing of any IP packet: once upon its acceptance from the L2 entity, and once upon its transmission to the L2 entity. In actuality, for cable modems, IP filtering is generally the only IP processing done for transit traffic. This means that inbound and outbound filtering can generally be done at the same time with one pass through the filter table.

The objects in this table are only accessible from cable devices that are not operating in DiffServ MIB mode (RFC 3289). See the conformance section for details.

Note that some devices are required by other specifications (e.g., the DOCSIS OSSIv1.1 specification) to support the legacy SNMPv1/v2c docsDevFilter mode for backward compatibility.

Table entries MUST NOT persist across reboots for any device.

This table is deprecated. Instead, use the DiffServ MIB from RFC3289.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterIpTable) GetEntityData 

func (docsDevFilterIpTable *DOCSCABLEDEVICEMIB_DocsDevFilterIpTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry 

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Index used to order the application of filters.
	// The filter with the lowest index is always applied first. The type is
	// interface{} with range: 1..2147483647.
	DocsDevFilterIpIndex interface{}

	// Controls and reflects the status of rows in this table.  Specifying only
	// this object (with the appropriate index) on a CM is sufficient to create a
	// filter row that matches all inbound packets on the ethernet interface and
	// results in the packets being discarded. docsDevFilterIpIfIndex (at least)
	// must be specified on a CMTS to create a row.  Creation of the rows may be
	// done via either create-and-wait or create-and-go, but the filter is not
	// applied until this object is set to (or changes to) active. There is no
	// restriction in changing any object in a row while this object is set to
	// active. The type is RowStatus.
	DocsDevFilterIpStatus interface{}

	// If set to discard(1), all packets matching this filter will be discarded,
	// and scanning of the remainder of the filter list will be aborted. If set to
	// accept(2), all packets matching this filter will be accepted for further
	// processing (e.g., bridging).  If docsDevFilterIpContinue is set to true,
	// see if there are other matches; otherwise, done.  If set to policy (3),
	// execute the policy entries matched by docsDevFilterIpPolicyId in
	// docsDevFilterPolicyTable.  If docsDevFilterIpContinue is set to true,
	// continue scanning the table for other matches; otherwise, done. The type is
	// DocsDevFilterIpControl.
	DocsDevFilterIpControl interface{}

	// The entry interface to which this filter applies. The value corresponds to
	// ifIndex for either a CATV MAC or another interface. If the value is zero,
	// the filter applies to all interfaces.  Default value in CMs is the index of
	// the customer-side (e.g., ethernet) interface(s).  In CMTSes, this object
	// MUST be specified to create a row in this table.  Note that according to
	// the DOCSIS OSSIv1.1 specification, ifIndex '1' in the Cable Modem means
	// that this row applies to all CMCI (customer-facing) interfaces. The type is
	// interface{} with range: 0..2147483647.
	DocsDevFilterIpIfIndex interface{}

	// Determines whether the filter is applied to inbound(1) traffic, outbound(2)
	// traffic, or traffic in both(3) directions. The type is
	// DocsDevFilterIpDirection.
	DocsDevFilterIpDirection interface{}

	// If set to true(1), the filter only applies to multicast and broadcast
	// traffic. If set to false(2), the filter applies to all traffic. The type is
	// bool.
	DocsDevFilterIpBroadcast interface{}

	// The source IP address, or portion thereof, that is to be matched for this
	// filter.  The source address is first masked (ANDed) against
	// docsDevFilterIpSmask before being compared to this value.  A value of 0 for
	// this object and 0 for the mask matches all IP addresses. The type is string
	// with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevFilterIpSaddr interface{}

	// A bit mask that is to be applied to the source address prior to matching.
	// This mask is not necessarily the same as a subnet mask, but 1s bits must be
	// leftmost and contiguous. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevFilterIpSmask interface{}

	// The destination IP address, or portion thereof, that is to be matched for
	// this filter.  The destination address is first masked (ANDed) against
	// docsDevFilterIpDmask before being compared to this value.  A value of
	// 00000000 for this object and 00000000 for the mask matches all IP
	// addresses. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevFilterIpDaddr interface{}

	// A bit mask that is to be applied to the destination address prior to
	// matching. This mask is not necessarily the same as a subnet mask, but 1s
	// bits MUST be leftmost and contiguous. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevFilterIpDmask interface{}

	// The IP protocol value that is to be matched.  For example, icmp is 1, tcp
	// is 6, and udp is 17.  A value of 256 matches ANY protocol. The type is
	// interface{} with range: 0..256.
	DocsDevFilterIpProtocol interface{}

	// This is the inclusive lower bound of the transport-layer source port range
	// that is to be matched.  If the IP protocol of the packet is neither UDP nor
	// TCP, this object is ignored during matching. The type is interface{} with
	// range: 0..65535.
	DocsDevFilterIpSourcePortLow interface{}

	// This is the inclusive upper bound of the transport-layer source port range
	// that is to be matched.  If the IP protocol of the packet is neither UDP nor
	// TCP, this object is ignored during matching. The type is interface{} with
	// range: 0..65535.
	DocsDevFilterIpSourcePortHigh interface{}

	// This is the inclusive lower bound of the transport-layer destination port
	// range that is to be matched. If the IP protocol of the packet is neither
	// UDP nor TCP, this object is ignored during matching. The type is
	// interface{} with range: 0..65535.
	DocsDevFilterIpDestPortLow interface{}

	// This is the inclusive upper bound of the transport-layer destination port
	// range that is to be matched. If the IP protocol of the packet is neither
	// UDP nor TCP, this object is ignored during matching. The type is
	// interface{} with range: 0..65535.
	DocsDevFilterIpDestPortHigh interface{}

	// Counts the number of times this filter was matched. This object is
	// initialized to 0 at boot, or at row creation, and is reset only upon
	// reboot. The type is interface{} with range: 0..4294967295. Units are
	// matches.
	DocsDevFilterIpMatches interface{}

	// This is the value to be matched to the packet's TOS (Type of Service) value
	// (after the TOS value is ANDed with docsDevFilterIpTosMask).  A value for
	// this object of 0 and a mask of 0 matches all TOS values. The type is string
	// with length: 1..1.
	DocsDevFilterIpTos interface{}

	// The mask to be applied to the packet's TOS value before matching. The type
	// is string with length: 1..1.
	DocsDevFilterIpTosMask interface{}

	// If this value is set to true and docsDevFilterIpControl is anything but
	// discard (1), continue scanning and applying policies.  See Section 3.3.3
	// for more details. The type is bool.
	DocsDevFilterIpContinue interface{}

	// This object points to an entry in docsDevFilterPolicyTable.  If
	// docsDevFilterIpControl is set to policy (3), execute all matching policies
	// in docsDevFilterPolicyTable.  If no matching policy exists, treat as if
	// docsDevFilterIpControl were set to accept (1).  If this object is set to
	// the value of 0, there is no matching policy, and docsDevFilterPolicyTable
	// MUST NOT be consulted. The type is interface{} with range: 0..2147483647.
	DocsDevFilterIpPolicyId interface{}
}

DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry Describes a filter to apply to IP traffic received on a specified interface. All identity objects in this table (e.g., source and destination address/mask, protocol, source/dest port, TOS/mask, interface and direction) must match their respective fields in the packet for any given filter to match.

To create an entry in this table, docsDevFilterIpIfIndex must be specified.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry) GetEntityData 

func (docsDevFilterIpEntry *DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl 

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl string

DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl represents scanning the table for other matches; otherwise, done. 

const (
	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl_discard DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl = "discard"

	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl_accept DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl = "accept"

	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl_policy DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpControl = "policy"
)

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection 

type DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection string

DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection represents directions. 

const (
	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection_inbound DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection = "inbound"

	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection_outbound DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection = "outbound"

	DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection_both DOCSCABLEDEVICEMIB_DocsDevFilterIpTable_DocsDevFilterIpEntry_DocsDevFilterIpDirection = "both"
)

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable 

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Describes a single filter to apply to (bridged) LLC traffic received on a
	// specified interface. . The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry.
	DocsDevFilterLLCEntry []*DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry
}

DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable A list of filters to apply to (bridged) LLC traffic. The filters in this table are applied to incoming traffic on the appropriate interface(s) prior to any further processing (e.g., before the packet is handed off for level 3 processing, or for bridging). The specific action taken when no filter is matched is controlled by docsDevFilterLLCUnmatchedAction. Table entries MUST NOT persist across reboots for any device.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable) GetEntityData 

func (docsDevFilterLLCTable *DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry 

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Index used for the identification of filters (note
	// that LLC filter order is irrelevant). The type is interface{} with range:
	// 1..2147483647.
	DocsDevFilterLLCIndex interface{}

	// Controls and reflects the status of rows in this table. There is no
	// restriction on changing any of the associated columns for this row while
	// this object is set to active.  Specifying only this object (with the
	// appropriate index) on a CM is sufficient to create a filter row that
	// matches all inbound packets on the ethernet interface and results in the
	// packets being discarded.  docsDevFilterLLCIfIndex (at least) must be
	// specified on a CMTS to create a row. The type is RowStatus.
	DocsDevFilterLLCStatus interface{}

	// The entry interface to which this filter applies.  The value corresponds to
	// ifIndex for either a CATV MAC or another network interface.  If the value
	// is zero, the filter applies to all interfaces.  In Cable Modems, the
	// default value is the customer side interface(s).  In CMTSs, this object has
	// to be specified to create a row in this table.  Note that according to the
	// DOCSIS OSSIv1.1 specification, ifIndex '1' in the CM means that this row
	// applies to all Cable Modem-to-CPE Interfaces (CMCI). The type is
	// interface{} with range: 0..2147483647.
	DocsDevFilterLLCIfIndex interface{}

	// The format of the value in docsDevFilterLLCProtocol: either a two-byte
	// Ethernet Ethertype, or a one-byte 802.2 Service Access Point (SAP) value.
	// ethertype(1) also applies to Standard Network Access Protocol (SNAP)
	// encapsulated frames. The type is DocsDevFilterLLCProtocolType.
	DocsDevFilterLLCProtocolType interface{}

	// The layer-three protocol for which this filter applies. The protocol value
	// format depends on docsDevFilterLLCProtocolType.  Note that for SNAP frames,
	// ethertype filtering is performed rather than Destination Service Access
	// Point (DSAP) =0xAA. The type is interface{} with range: 0..65535.
	DocsDevFilterLLCProtocol interface{}

	// Counts the number of times this filter was matched. The type is interface{}
	// with range: 0..4294967295. Units are matches.
	DocsDevFilterLLCMatches interface{}
}

DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry Describes a single filter to apply to (bridged) LLC traffic received on a specified interface.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry) GetEntityData 

func (docsDevFilterLLCEntry *DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType 

type DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType string

DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType represents (SNAP) encapsulated frames. 

const (
	DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType_ethertype DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType = "ethertype"

	DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType_dsap DOCSCABLEDEVICEMIB_DocsDevFilterLLCTable_DocsDevFilterLLCEntry_DocsDevFilterLLCProtocolType = "dsap"
)

type DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable 

type DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry in the docsDevFilterPolicyTable. Entries are created by Network
	// Management. To create an entry, docsDevFilterPolicyId MUST be specified.
	// The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry.
	DocsDevFilterPolicyEntry []*DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry
}

DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable A Table that maps between a policy group ID and a set of pointers to policies to be applied. All rows with the same docsDevFilterPolicyId are part of the same group of policy pointers and are applied in the order in this table. docsDevFilterPolicyTable exists to allow multiple policy actions (referenced by policy pointers) to be applied to any given classified packet. The policy actions are applied in index order. For example:

Index ID Type Action 

1      1      TOS     1
9      5      TOS     1
12     1      IPSEC   3

This says that a packet that matches a filter with policy id 1 first has TOS policy 1 applied (which might set the TOS bits to enable a higher priority) and next has the IPSEC policy 3 applied (which may result in the packets being dumped into a secure VPN to a remote encryptor).

Policy ID 0 is reserved for default actions and is applied only to packets that match no filters in docsDevFilterIpTable.

Table entries MUST NOT persist across reboots for any device.

This table is deprecated. Instead, use the DiffServ MIB from RFC3289.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable) GetEntityData 

func (docsDevFilterPolicyTable *DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry 

type DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Index value for the table. The type is interface{}
	// with range: 1..2147483647.
	DocsDevFilterPolicyIndex interface{}

	// Policy ID for this entry.  If a policy ID can apply to multiple rows of
	// this table, all relevant policies are executed. Policy 0 (if populated) is
	// applied to all packets that do not match any of the filters.  N.B. If
	// docsDevFilterIpPolicyId is set to 0, it DOES NOT match policy 0 of this
	// table. The type is interface{} with range: 0..2147483647.
	DocsDevFilterPolicyId interface{}

	// Object used to create an entry in this table.  There is no restriction in
	// changing any object in a row while this object is set to active. The
	// following object MUST have a valid value before this object can be set to
	// active:  docsDevFilterPolicyPtr. The type is RowStatus.
	DocsDevFilterPolicyStatus interface{}

	// This object points to a row in an applicable filter policy table.
	// Currently, the only standard policy table is docsDevFilterTosTable.  Per
	// the textual convention, this object points to the first accessible object
	// in the row; e.g., to point to a row in docsDevFilterTosTable with an index
	// of 21, the value of this object would be the object identifier
	// docsDevTosStatus.21.  Vendors are recommended to adhere to the same
	// convention when adding vendor-specific policy table extensions.  If this
	// pointer references an empty or non-existent row, then no policy action is
	// taken.  The default upon row creation is a null pointer that results in no
	// policy action being taken. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	DocsDevFilterPolicyPtr interface{}
}

DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry An entry in the docsDevFilterPolicyTable. Entries are created by Network Management. To create an entry, docsDevFilterPolicyId MUST be specified.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry) GetEntityData 

func (docsDevFilterPolicyEntry *DOCSCABLEDEVICEMIB_DocsDevFilterPolicyTable_DocsDevFilterPolicyEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterTosTable 

type DOCSCABLEDEVICEMIB_DocsDevFilterTosTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A TOS policy entry. The type is slice of
	// DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry.
	DocsDevFilterTosEntry []*DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry
}

DOCSCABLEDEVICEMIB_DocsDevFilterTosTable Table used to describe Type of Service (TOS) bits processing.

This table is an adjunct to the docsDevFilterIpTable and the docsDevFilterPolicy table. Entries in the latter table can point to specific rows in this (and other) tables and cause specific actions to be taken. This table permits the manipulation of the value of the Type of Service bits in the IP header of the matched packet as follows:

Set the tosBits of the packet to 

(tosBits & docsDevFilterTosAndMask) |
docsDevFilterTosOrMask

This construct allows you to do a clear and set of all the TOS bits in a flexible manner.

Table entries MUST NOT persist across reboots for any device.

This table is deprecated. Instead, use the DiffServ MIB from RFC3289.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterTosTable) GetEntityData 

func (docsDevFilterTosTable *DOCSCABLEDEVICEMIB_DocsDevFilterTosTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry 

type DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The unique index for this row.  There are no
	// ordering requirements for this table, and any valid index may be specified.
	// The type is interface{} with range: 1..2147483647.
	DocsDevFilterTosIndex interface{}

	// The object used to create and delete entries in this table. A row created
	// by specifying just this object results in a row that specifies no change to
	// the TOS bits.  A row may be created using either the create-and-go or
	// create-and-wait paradigms.  There is no restriction on the ability to
	// change values in this row while the row is active. The type is RowStatus.
	DocsDevFilterTosStatus interface{}

	// This value is bitwise ANDed with the matched packet's TOS bits. The type is
	// string with length: 1..1.
	DocsDevFilterTosAndMask interface{}

	// This value is bitwise ORed with the result from the AND procedure (tosBits
	// & docsDevFilterTosAndMask). The result then replaces the packet's TOS bits.
	// The type is string with length: 1..1.
	DocsDevFilterTosOrMask interface{}
}

DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry A TOS policy entry.

func (*DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry) GetEntityData 

func (docsDevFilterTosEntry *DOCSCABLEDEVICEMIB_DocsDevFilterTosTable_DocsDevFilterTosEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault 

type DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault string

DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault represents processing (e.g., bridging). 

const (
	DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault_discard DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault = "discard"

	DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault_accept DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterIpDefault = "accept"
)

type DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction 

type DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction string

DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction represents takes the opposite of this action. 

const (
	DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction_discard DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction = "discard"

	DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction_accept DOCSCABLEDEVICEMIB_DocsDevFilter_DocsDevFilterLLCUnmatchedAction = "accept"
)

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable 

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry describing access to SNMP objects by a particular network
	// management station. An entry in this table is not readable unless the
	// management station has read-write permission (either implicit if the table
	// is empty, or explicit through an entry in this table). Entries are ordered
	// by docsDevNmAccessIndex.  The first matching entry (e.g., matching IP
	// address and community string) is used to derive access. The type is slice
	// of DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry.
	DocsDevNmAccessEntry []*DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry
}

DOCSCABLEDEVICEMIB_DocsDevNmAccessTable This table controls access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted. The objects in this table MUST NOT persist across reboots. The objects in this table are only accessible from cable devices that are not capable of operating in SNMP Coexistence mode (RFC 3584) or in SNMPv3 mode (RFC 3410). See the conformance section for details. Note that some devices are required by other specifications (e.g., the DOCSIS OSSIv1.1 specification) to support the legacy SNMPv1/v2c docsDevNmAccess mode for backward compatibility.

This table is deprecated. Instead, use the SNMP coexistence MIBs from RFC 3584, the TARGET and NOTIFICATION MIBs from RFC 3413, and the View-Based Access Control Model (VACM) MIBs for all SNMP protocol versions from RFC 3415.

func (*DOCSCABLEDEVICEMIB_DocsDevNmAccessTable) GetEntityData 

func (docsDevNmAccessTable *DOCSCABLEDEVICEMIB_DocsDevNmAccessTable) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry 

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Index used to order the application of access
	// entries. The type is interface{} with range: 1..2147483647.
	DocsDevNmAccessIndex interface{}

	// The IP address (or subnet) of the network management station. The address
	// 0.0.0.0 is defined to mean any Network Management Station (NMS).  If traps
	// are enabled for this entry, then the value must be the address of a
	// specific device.  Implementations MAY recognize 255.255.255.255 as
	// equivalent to 0.0.0.0. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevNmAccessIp interface{}

	// The IP subnet mask of the network management stations. If traps are enabled
	// for this entry, then the value must be 0.0.0.0.  Implementations MAY
	// recognize 255.255.255.255 as equivalent to 0.0.0.0. The type is string with
	// pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevNmAccessIpMask interface{}

	// The community string to be matched for access by this entry.  If set to a
	// zero-length string, then any community string will match.  When read, this
	// object SHOULD return a zero-length string. The type is string.
	DocsDevNmAccessCommunity interface{}

	// Specifies the type of access allowed to this NMS. Setting this object to
	// none(1) causes the table entry to be destroyed.  Read(2) allows access by
	// 'get' and 'get-next' PDUs.  ReadWrite(3) allows access by 'set' as well.
	// RoWithtraps(4), rwWithTraps(5), and trapsOnly(6) control distribution of
	// Trap PDUs transmitted by this device. The type is DocsDevNmAccessControl.
	DocsDevNmAccessControl interface{}

	// Specifies the set of interfaces from which requests from this NMS will be
	// accepted.  Each octet within the value of this object specifies a set of
	// eight interfaces, the first octet specifying ports 1 through 8, the second
	// octet specifying interfaces 9 through 16, etc.  Within each octet, the most
	// significant bit represents the lowest numbered interface, and the least
	// significant bit represents the highest numbered interface.  Thus, each
	// interface is represented by a single bit within the value of this object.
	// If that bit has a value of '1' then that interface is included in the set.
	// Note that entries in this table apply only to link-layer interfaces (e.g.,
	// Ethernet and CATV MAC).  Bits representing upstream and downstream channel
	// interfaces MUST NOT be set to '1'. Note that if bits corresponding to
	// non-existing interfaces are set, the result is implementation specific.
	// Note that according to the DOCSIS OSSIv1.1 specification, when ifIndex '1'
	// is included in the set, then this row applies to all CPE (customer-facing)
	// interfaces.  The size of this object is the minimum required to represent
	// all configured interfaces for this device. The type is string with length:
	// 1..32.
	DocsDevNmAccessInterfaces interface{}

	// Controls and reflects the status of rows in this table. Rows in this table
	// may be created by either the create-and-go or create-and-wait paradigm.
	// There is no restriction on changing values in a row of this table while the
	// row is active.  The following objects MUST have valid values before this
	// object can be set to active: docsDevNmAccessIp, docsDevNmAccessStatus,
	// docsDevNmAccessIpMask, docsDevNmAccessCommunity, docsDevNmAccessControl,
	// and docsDevNmAccessInterfaces. The type is RowStatus.
	DocsDevNmAccessStatus interface{}

	// Specifies the TRAP version that is sent to this NMS. Setting this object to
	// disableSNMPv2trap (1) causes the trap in SNMPv1 format to be sent to a
	// particular NMS. Setting this object to enableSNMPv2trap (2) causes the trap
	// in SNMPv2 format be sent to a particular NMS. The type is
	// DocsDevNmAccessTrapVersion.
	DocsDevNmAccessTrapVersion interface{}
}

DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry An entry describing access to SNMP objects by a particular network management station. An entry in this table is not readable unless the management station has read-write permission (either implicit if the table is empty, or explicit through an entry in this table). Entries are ordered by docsDevNmAccessIndex. The first matching entry (e.g., matching IP address and community string) is used to derive access.

func (*DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry) GetEntityData 

func (docsDevNmAccessEntry *DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl 

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl string

DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl represents device. 

const (
	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_none DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "none"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_read DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "read"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_readWrite DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "readWrite"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_roWithTraps DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "roWithTraps"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_rwWithTraps DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "rwWithTraps"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl_trapsOnly DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessControl = "trapsOnly"
)

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion 

type DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion string

DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion represents trap in SNMPv2 format be sent to a particular NMS. 

const (
	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion_disableSNMPv2trap DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion = "disableSNMPv2trap"

	DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion_enableSNMPv2trap DOCSCABLEDEVICEMIB_DocsDevNmAccessTable_DocsDevNmAccessEntry_DocsDevNmAccessTrapVersion = "enableSNMPv2trap"
)

type DOCSCABLEDEVICEMIB_DocsDevServer 

type DOCSCABLEDEVICEMIB_DocsDevServer struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// If operational(1), the device has completed loading and processing of
	// configuration parameters, and the CMTS has completed the Registration
	// exchange.  If disabled(2), then the device was administratively disabled,
	// possibly by being refused network access in the configuration file.  If
	// waitingForDhcpOffer(3), then a Dynamic Host Configuration Protocol (DHCP)
	// Discover has been transmitted, and no offer has yet been received.  If
	// waitingForDhcpResponse(4), then a DHCP Request has been transmitted, and no
	// response has yet been received.  If waitingForTimeServer(5), then a Time
	// Request has been transmitted, and no response has yet been received. If
	// waitingForTftp(6), then a request to the TFTP parameter server has been
	// made, and no response received.  If refusedByCmts(7), then the Registration
	// Request/Response exchange with the CMTS failed.  If forwardingDenied(8),
	// then the registration process was completed, but the network access option
	// in the received configuration file prohibits forwarding.  If other(9), then
	// the registration process reached a point that does not fall into one of the
	// above categories.  If unknown(10), then the device has not yet begun the
	// registration process or is in some other indeterminate state. The type is
	// DocsDevServerBootState.
	DocsDevServerBootState interface{}

	// The IP address of the DHCP server that assigned an IP address to this
	// device. Returns 0.0.0.0 if DHCP is not used for IP address assignment, or
	// if this agent is not assigned an IPv4 address.  This object is deprecated
	// and is replaced by docsDevServerDhcpAddress. The type is string with
	// pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevServerDhcp interface{}

	// The IP address of the Time server (RFC 0868).  Returns 0.0.0.0 if the time
	// server IP address is unknown, or if the time server is not an IPv4 server.
	// This object is deprecated and is replaced by docsDevServerTimeAddress. The
	// type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevServerTime interface{}

	// The IP address of the TFTP server responsible for downloading provisioning
	// and configuration parameters to this device. Returns 0.0.0.0 if the TFTP
	// server address is unknown or is not an IPv4 address.  This object is
	// deprecated and is replaced by docsDevServerConfigTftpAddress. The type is
	// string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevServerTftp interface{}

	// The name of the device configuration file read from the TFTP server.
	// Returns a zero-length string if the configuration file name is unknown. The
	// type is string.
	DocsDevServerConfigFile interface{}

	// The type of address of docsDevServerDhcpAddress.  If DHCP was not used,
	// this value should return unknown(0). The type is InetAddressType.
	DocsDevServerDhcpAddressType interface{}

	// The internet address of the DHCP server that assigned an IP address to this
	// device. Returns the zero length octet string if DHCP was not used for IP
	// address assignment. The type is string with length: 0..255.
	DocsDevServerDhcpAddress interface{}

	// The type of address of docsDevServerTimeAddress.  If no time server exists,
	// this value should return unknown(0). The type is InetAddressType.
	DocsDevServerTimeAddressType interface{}

	// The Internet address of the RFC 868 Time server, as provided by DHCP option
	// 4.  Note that if multiple values are provided to the CM in DHCP option 4,
	// the value of this MIB object MUST be the Time server address from which the
	// Time of Day reference was acquired as based on the DOCSIS RFI
	// specification.  During the period of time where the Time of Day have not
	// been acquired, the Time server address reported by the CM may report the
	// first address value in the DHCP option value or the last server address the
	// CM attempted to get the Time of day value.  Returns the zero-length octet
	// string if the time server IP address is not provisioned. The type is string
	// with length: 0..255.
	DocsDevServerTimeAddress interface{}

	// The type of address of docsDevServerConfigTftpAddress. If no TFTP server
	// exists, this value should return unknown(0). The type is InetAddressType.
	DocsDevServerConfigTftpAddressType interface{}

	// The internet address of the TFTP server responsible for downloading
	// provisioning and configuration parameters to this device.  Returns the
	// zero-length octet string if the config server address is unknown.  There
	// are certain security risks that are involved with using TFTP. The type is
	// string with length: 0..255.
	DocsDevServerConfigTftpAddress interface{}
}

DOCSCABLEDEVICEMIB_DocsDevServer

func (*DOCSCABLEDEVICEMIB_DocsDevServer) GetEntityData 

func (docsDevServer *DOCSCABLEDEVICEMIB_DocsDevServer) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState 

type DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState string

DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState represents state. 

const (
	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_operational DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "operational"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_disabled DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "disabled"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_waitingForDhcpOffer DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "waitingForDhcpOffer"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_waitingForDhcpResponse DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "waitingForDhcpResponse"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_waitingForTimeServer DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "waitingForTimeServer"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_waitingForTftp DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "waitingForTftp"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_refusedByCmts DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "refusedByCmts"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_forwardingDenied DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "forwardingDenied"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_other DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "other"

	DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState_unknown DOCSCABLEDEVICEMIB_DocsDevServer_DocsDevServerBootState = "unknown"
)

type DOCSCABLEDEVICEMIB_DocsDevSoftware 

type DOCSCABLEDEVICEMIB_DocsDevSoftware struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The address of the TFTP server used for software upgrades.  If the TFTP
	// server is unknown or is a non-IPv4 address, return 0.0.0.0.  This object is
	// deprecated.  See docsDevSwServerAddress for its replacement.  This object
	// will have its value modified, given a valid SET to docsDevSwServerAddress.
	// The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	DocsDevSwServer interface{}

	// The filename of the software image to be downloaded via TFTP, or the
	// abs_path (as defined in RFC2616) of the software image to be downloaded via
	// HTTP.  Unless set via SNMP, this is the filename or abs_path specified by
	// the provisioning server during the boot process  that corresponds to the
	// software version that is desired for this device.  If unknown, the value of
	// this object is the zero-length string. The type is string with length:
	// 0..64.
	DocsDevSwFilename interface{}

	// If set to upgradeFromMgt(1), the device will initiate a TFTP or HTTP
	// software image download.  After successfully receiving an image, the device
	// will set its state to ignoreProvisioningUpgrade(3) and reboot. If the
	// download process is interrupted (e.g., by a reset or power failure), the
	// device will load the previous image and, after re-initialization, continue
	// to attempt loading the image specified in docsDevSwFilename.  If set to
	// allowProvisioningUpgrade(2), the device will use the software version
	// information supplied by the provisioning server when next rebooting (this
	// does not cause a reboot).  When set to ignoreProvisioningUpgrade(3), the
	// device will disregard software image upgrade information from the
	// provisioning server.  Note that reading this object can return
	// upgradeFromMgt(1).  This indicates that a software download is currently in
	// progress, and that the device will reboot after successfully receiving an
	// image. The type is DocsDevSwAdminStatus.
	DocsDevSwAdminStatus interface{}

	// InProgress(1) indicates that a TFTP or HTTP download is underway, either as
	// a result of a version mismatch at provisioning or as a result of a
	// upgradeFromMgt request. No other docsDevSw* objects can be modified in this
	// state.  CompleteFromProvisioning(2) indicates that the last software
	// upgrade was a result of version mismatch at provisioning.
	// CompleteFromMgt(3) indicates that the last software upgrade was a result of
	// setting docsDevSwAdminStatus to upgradeFromMgt.  Failed(4) indicates that
	// the last attempted download failed, ordinarily due to TFTP or HTTP timeout.
	// The type is DocsDevSwOperStatus.
	DocsDevSwOperStatus interface{}

	// The software version currently operating in this device. This string's
	// syntax is that used by the individual vendor to identify software versions.
	// For a CM, this string will describe the current software load.  For a CMTS,
	// this object SHOULD contain a human-readable representation either of the
	// vendor specific designation of the software for the chassis, or of the
	// software for the control processor.  If neither of these is applicable, the
	// value MUST be a zero-length string. The type is string.
	DocsDevSwCurrentVers interface{}

	// The type of address of the TFTP or HTTP server used for software upgrades.
	// If docsDevSwServerTransportProtocol is currently set to tftp(1), attempting
	// to set this object to dns(16) MUST result in an error. The type is
	// InetAddressType.
	DocsDevSwServerAddressType interface{}

	// The address of the TFTP or HTTP server used for software upgrades.  If the
	// TFTP/HTTP server is unknown, return the zero- length address string (see
	// the TextualConvention).  If docsDevSwServer is also implemented in this
	// agent, this object is tied to it.  A set of this object to an IPv4 address
	// will result in also setting the value of docsDevSwServer to that address.
	// If this object is set to an IPv6 address, docsDevSwServer is set to
	// 0.0.0.0. If docsDevSwServer is set, this object is also set to that value.
	// Note that if both are set in the same action, the order of which one sets
	// the other is undefined. The type is string with length: 0..255.
	DocsDevSwServerAddress interface{}

	// This object specifies the transport protocol (TFTP or HTTP) to be used for
	// software upgrades.  If the value of this object is tftp(1), then the cable
	// device uses TFTP (RFC1350) read request packets to download the
	// docsDevSwFilename from the docsDevSwServerAddress in octet mode.  If the
	// value of this object is http(2), then the cable device uses HTTP 1.0
	// (RFC1945) or HTTP 1.1 (RFC2616) GET requests sent to host
	// docsDevSwServerAddress to download the software image from path
	// docsDevSwFilename.  If docsDevSwServerAddressType is currently set to
	// dns(16), attempting to set this object to tftp(1) MUST result in an error.
	// The type is DocsDevSwServerTransportProtocol.
	DocsDevSwServerTransportProtocol interface{}
}

DOCSCABLEDEVICEMIB_DocsDevSoftware

func (*DOCSCABLEDEVICEMIB_DocsDevSoftware) GetEntityData 

func (docsDevSoftware *DOCSCABLEDEVICEMIB_DocsDevSoftware) GetEntityData() *types.CommonEntityData

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus 

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus string

DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus represents will reboot after successfully receiving an image. 

const (
	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus_upgradeFromMgt DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus = "upgradeFromMgt"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus_allowProvisioningUpgrade DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus = "allowProvisioningUpgrade"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus_ignoreProvisioningUpgrade DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwAdminStatus = "ignoreProvisioningUpgrade"
)

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus 

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus string

DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus represents failed, ordinarily due to TFTP or HTTP timeout. 

const (
	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus_inProgress DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus = "inProgress"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus_completeFromProvisioning DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus = "completeFromProvisioning"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus_completeFromMgt DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus = "completeFromMgt"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus_failed DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus = "failed"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus_other DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwOperStatus = "other"
)

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol 

type DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol string

DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol represents result in an error. 

const (
	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol_tftp DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol = "tftp"

	DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol_http DOCSCABLEDEVICEMIB_DocsDevSoftware_DocsDevSwServerTransportProtocol = "http"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.