gc

package
v0.0.0-...-d433f40 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 21, 2022 License: MIT Imports: 48 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	H0 = 2166136261
	Hp = 16777619
)

FNV-1 hash function constants.

View Source 
const (
	EscFuncUnknown = 0 + iota
	EscFuncPlanned
	EscFuncStarted
	EscFuncTagged
)
View Source 
const (
	EscUnknown = iota
	EscNone    // Does not escape to heap, result, or parameters.
	EscHeap    // Reachable from the heap
	EscNever   // By construction will not escape.
)
View Source 
const (
	FErr fmtMode = iota
	FDbg
	FTypeId
	FTypeIdName // same as FTypeId, but use package name instead of prefix
)

*types.Sym, *types.Type, and *Node types use the flags below to set the format mode

View Source 
const (
	InitNotStarted = iota
	InitDone
	InitPending
)

Static initialization phase. These values are stored in two bits in Node.flags.

View Source 
const (
	// Func pragmas.
	Nointerface    syntax.Pragma = 1 << iota
	Noescape                     // func parameters don't escape
	Norace                       // func must not have race detector annotations
	Nosplit                      // func should not execute on separate stack
	Noinline                     // func should not be inlined
	NoCheckPtr                   // func should not be instrumented by checkptr
	CgoUnsafeArgs                // treat a pointer to one arg as a pointer to them all
	UintptrEscapes               // pointers converted to uintptr escape

	// Runtime-only func pragmas.
	// See ../../../../runtime/README.md for detailed descriptions.
	Systemstack        // func must run on system stack
	Nowritebarrier     // emit compiler error instead of write barrier
	Nowritebarrierrec  // error on write barrier in this or recursive callees
	Yeswritebarrierrec // cancels Nowritebarrierrec in this function and callees

	// Runtime-only type pragmas
	NotInHeap // values of this type must not be heap allocated
)
View Source 
const (
	// Maximum size in bits for Mpints before signalling
	// overflow and also mantissa precision for Mpflts.
	Mpprec = 512
	// Turn on for constant arithmetic debugging output.
	Mpdebug = false
)
View Source 
const (
	BUCKETSIZE  = 8
	MAXKEYSIZE  = 128
	MAXELEMSIZE = 128
)

Builds a type representing a Bucket structure for the given map type. This type is not visible to users - we include only enough information to generate a correct GC program for it. Make sure this stays in sync with runtime/map.go.

View Source 
const (
	Txxx = types.Txxx

	TINT8    = types.TINT8
	TUINT8   = types.TUINT8
	TINT16   = types.TINT16
	TUINT16  = types.TUINT16
	TINT32   = types.TINT32
	TUINT32  = types.TUINT32
	TINT64   = types.TINT64
	TUINT64  = types.TUINT64
	TINT     = types.TINT
	TUINT    = types.TUINT
	TUINTPTR = types.TUINTPTR

	TCOMPLEX64  = types.TCOMPLEX64
	TCOMPLEX128 = types.TCOMPLEX128

	TFLOAT32 = types.TFLOAT32
	TFLOAT64 = types.TFLOAT64

	TBOOL = types.TBOOL

	TPTR       = types.TPTR
	TFUNC      = types.TFUNC
	TSLICE     = types.TSLICE
	TARRAY     = types.TARRAY
	TSTRUCT    = types.TSTRUCT
	TCHAN      = types.TCHAN
	TMAP       = types.TMAP
	TINTER     = types.TINTER
	TFORW      = types.TFORW
	TANY       = types.TANY
	TSTRING    = types.TSTRING
	TUNSAFEPTR = types.TUNSAFEPTR

	// pseudo-types for literals
	TIDEAL = types.TIDEAL
	TNIL   = types.TNIL
	TBLANK = types.TBLANK

	// pseudo-types for frame layout
	TFUNCARGS = types.TFUNCARGS
	TCHANARGS = types.TCHANARGS

	NTYPE = types.NTYPE
)

convenience constants

View Source 
const ArhdrSize = 60

architecture-independent object file output

View Source 
const (
	BADWIDTH = types.BADWIDTH
)

Variables

View Source 
var (
	Deferreturn,
	Duffcopy,
	Duffzero,

	Udiv *obj.LSym

	BoundsCheckFunc [ssa.BoundsKindCount]*obj.LSym
	ExtendCheckFunc [ssa.BoundsKindCount]*obj.LSym

	// GO386=387
	ControlWord64trunc,
	ControlWord32 *obj.LSym

	// Wasm
	WasmMove,
	WasmZero,
	WasmDiv,
	WasmTruncS,
	WasmTruncU,
	SigPanic *obj.LSym
)
View Source 
var (
	Debug_append       int
	Debug_checkptr     int
	Debug_closure      int
	Debug_compilelater int

	Debug_libfuzzer    int
	Debug_panic        int
	Debug_slice        int
	Debug_vlog         bool
	Debug_wb           int
	Debug_pctab        string
	Debug_locationlist int
	Debug_typecheckinl int
	Debug_gendwarfinl  int
	Debug_softfloat    int
	Debug_defer        int
)
View Source 
var Ctxt *obj.Link
View Source 
var Debug [256]int
View Source 
var Debug_checknil int
View Source 
var (
	Debug_export int // if set, print debugging information about export data
)
View Source 
var Debug_gcprog int // set by -d gcprog
View Source 
var Debug_typeassert int
View Source 
var LivenessInvalid = LivenessIndex{-2, -2}

LivenessInvalid indicates an unsafe point.

We use index -2 because PCDATA tables conventionally start at -1, so -1 is used to mean the entry liveness map (which is actually at index 0; sigh). TODO(austin): Maybe we should use PCDATA+1 as the index into the liveness map so -1 uniquely refers to the entry liveness map.

View Source 
var Runtimepkg *types.Pkg // fake package runtime
View Source 
var Widthptr int
View Source 
var Widthreg int

Functions

func AddAux 

func AddAux(a *obj.Addr, v *ssa.Value)

AddAux adds the offset in the aux fields (AuxInt and Aux) of v to a.

func AddAux2 

func AddAux2(a *obj.Addr, v *ssa.Value, offset int64)

func AddrAuto 

func AddrAuto(a *obj.Addr, v *ssa.Value)

func Addrconst 

func Addrconst(a *obj.Addr, v int64)

func AuxOffset 

func AuxOffset(v *ssa.Value) (offset int64)

func CheckLoweredGetClosurePtr 

func CheckLoweredGetClosurePtr(v *ssa.Value)

CheckLoweredGetClosurePtr checks that v is the first instruction in the function's entry block. The output of LoweredGetClosurePtr is generally hardwired to the correct register. That register contains the closure pointer on closure entry.

func CheckLoweredPhi 

func CheckLoweredPhi(v *ssa.Value)

CheckLoweredPhi checks that regalloc and stackalloc correctly handled phi values. Called during ssaGenValue.

func Dump 

func Dump(s string, n *Node)

func Exit 

func Exit(code int)

func Fatalf 

func Fatalf(fmt_ string, args ...interface{})

func IncomparableField 

func IncomparableField(t *types.Type) *types.Field

IncomparableField returns an incomparable Field of struct Type t, if any.

func IsAlias 

func IsAlias(sym *types.Sym) bool

func IsComparable 

func IsComparable(t *types.Type) bool

IsComparable reports whether t is a comparable type.

func IsRegularMemory 

func IsRegularMemory(t *types.Type) bool

IsRegularMemory reports whether t can be compared/hashed as regular memory.

func Isconst 

func Isconst(n *Node, ct Ctype) bool

func Main 

func Main(archInit func(*Arch))

Main parses flags and Go source files specified in the command-line arguments, type-checks the parsed Go package, compiles functions to machine code, and finally writes the compiled package definition to disk.

func Patch 

func Patch(p *obj.Prog, to *obj.Prog)

func Rnd 

func Rnd(o int64, r int64) int64

func Warn 

func Warn(fmt_ string, args ...interface{})

func Warnl 

func Warnl(line src.XPos, fmt_ string, args ...interface{})

Types

type AlgKind 

type AlgKind int

AlgKind describes the kind of algorithms used for comparing and hashing a Type. 

const (
	// These values are known by runtime.
	ANOEQ AlgKind = iota
	AMEM0
	AMEM8
	AMEM16
	AMEM32
	AMEM64
	AMEM128
	ASTRING
	AINTER
	ANILINTER
	AFLOAT32
	AFLOAT64
	ACPLX64
	ACPLX128

	// Type can be compared/hashed as regular memory.
	AMEM AlgKind = 100

	// Type needs special comparison/hashing functions.
	ASPECIAL AlgKind = -1
)

type Arch 

type Arch struct {
	LinkArch *obj.LinkArch

	REGSP     int
	MAXWIDTH  int64
	Use387    bool // should 386 backend use 387 FP instructions instead of sse2.
	SoftFloat bool

	PadFrame func(int64) int64

	// ZeroRange zeroes a range of memory on stack. It is only inserted
	// at function entry, and it is ok to clobber registers.
	ZeroRange func(*Progs, *obj.Prog, int64, int64, *uint32) *obj.Prog

	Ginsnop      func(*Progs) *obj.Prog
	Ginsnopdefer func(*Progs) *obj.Prog // special ginsnop for deferreturn

	// SSAMarkMoves marks any MOVXconst ops that need to avoid clobbering flags.
	SSAMarkMoves func(*SSAGenState, *ssa.Block)

	// SSAGenValue emits Prog(s) for the Value.
	SSAGenValue func(*SSAGenState, *ssa.Value)

	// SSAGenBlock emits end-of-block Progs. SSAGenValue should be called
	// for all values in the block before SSAGenBlock.
	SSAGenBlock func(s *SSAGenState, b, next *ssa.Block)
}

type BlockEffects 

type BlockEffects struct {
	// contains filtered or unexported fields
}

BlockEffects summarizes the liveness effects on an SSA block.

type Branch 

type Branch struct {
	P *obj.Prog  // branch instruction
	B *ssa.Block // target
}

Branch is an unresolved branch.

type Class 

type Class uint8

The Class of a variable/function describes the "storage class" of a variable or function. During parsing, storage classes are called declaration contexts. 

const (
	Pxxx      Class = iota // no class; used during ssa conversion to indicate pseudo-variables
	PEXTERN                // global variable
	PAUTO                  // local variables
	PAUTOHEAP              // local variable or parameter moved to heap
	PPARAM                 // input arguments
	PPARAMOUT              // output results
	PFUNC                  // global function

)

func (Class) String 

func (i Class) String() string

type Ctype 

type Ctype uint8

Ctype describes the constant kind of an "ideal" (untyped) constant. 

const (
	CTxxx Ctype = iota

	CTINT
	CTRUNE
	CTFLT
	CTCPLX
	CTSTR
	CTBOOL
	CTNIL
)

type Dlist 

type Dlist struct {
	// contains filtered or unexported fields
}

A Dlist stores a pointer to a TFIELD Type embedded within a TSTRUCT or TINTER Type.

type Error 

type Error struct {
	// contains filtered or unexported fields
}

type EscEdge 

type EscEdge struct {
	// contains filtered or unexported fields
}

An EscEdge represents an assignment edge between two Go variables.

type EscHole 

type EscHole struct {
	// contains filtered or unexported fields
}

An EscHole represents a context for evaluation a Go expression. E.g., when evaluating p in "x = **p", we'd have a hole with dst==x and derefs==2.

type EscLeaks 

type EscLeaks [1 + numEscResults]uint8

An EscLeaks represents a set of assignment flows from a parameter to the heap or to any of its function's (first numEscResults) result parameters.

func ParseLeaks 

func ParseLeaks(s string) EscLeaks

ParseLeaks parses a binary string representing an EscLeaks.

func (*EscLeaks) AddHeap 

func (l *EscLeaks) AddHeap(derefs int)

AddHeap adds an assignment flow from l to the heap.

func (*EscLeaks) AddResult 

func (l *EscLeaks) AddResult(i, derefs int)

AddResult adds an assignment flow from l to its function's i'th result parameter.

func (EscLeaks) Empty 

func (l EscLeaks) Empty() bool

Empty reports whether l is an empty set (i.e., no assignment flows).

func (EscLeaks) Encode 

func (l EscLeaks) Encode() string

Encode converts l into a binary string for export data.

func (EscLeaks) Heap 

func (l EscLeaks) Heap() int

Heap returns the minimum deref count of any assignment flow from l to the heap. If no such flows exist, Heap returns -1.

func (*EscLeaks) Optimize 

func (l *EscLeaks) Optimize()

Optimize removes result flow paths that are equal in length or longer than the shortest heap flow path.

func (EscLeaks) Result 

func (l EscLeaks) Result(i int) int

Result returns the minimum deref count of any assignment flow from l to its function's i'th result parameter. If no such flows exist, Result returns -1.

type EscLocation 

type EscLocation struct {
	// contains filtered or unexported fields
}

An EscLocation represents an abstract location that stores a Go variable.

type EscNote 

type EscNote struct {
	// contains filtered or unexported fields
}

type Escape 

type Escape struct {
	// contains filtered or unexported fields
}

type FloatingEQNEJump 

type FloatingEQNEJump struct {
	Jump  obj.As
	Index int
}

type FmtFlag 

type FmtFlag int

A FmtFlag value is a set of flags (or 0). They control how the Xconv functions format their values. See the respective function's documentation for details. 

const (
	FmtLeft     FmtFlag = 1 << iota // '-'
	FmtSharp                        // '#'
	FmtSign                         // '+'
	FmtUnsigned                     // internal use only (historic: u flag)
	FmtShort                        // verb == 'S'       (historic: h flag)
	FmtLong                         // verb == 'L'       (historic: l flag)
	FmtComma                        // '.' (== hasPrec)  (historic: , flag)
	FmtByte                         // '0'               (historic: hh flag)
)

type Func 

type Func struct {
	Shortname *types.Sym
	Enter     Nodes // for example, allocate and initialize memory for escaping parameters
	Exit      Nodes
	Cvars     Nodes   // closure params
	Dcl       []*Node // autodcl for this func/closure

	// Parents records the parent scope of each scope within a
	// function. The root scope (0) has no parent, so the i'th
	// scope's parent is stored at Parents[i-1].
	Parents []ScopeID

	// Marks records scope boundary changes.
	Marks []Mark

	// Closgen tracks how many closures have been generated within
	// this function. Used by closurename for creating unique
	// function names.
	Closgen int

	FieldTrack map[*types.Sym]struct{}
	DebugInfo  *ssa.FuncDebug
	Ntype      *Node // signature
	Top        int   // top context (ctxCallee, etc)
	Closure    *Node // OCLOSURE <-> ODCLFUNC
	Nname      *Node

	Inl *Inline

	Label int32 // largest auto-generated label in this function

	Endlineno src.XPos
	WBPos     src.XPos // position of first write barrier; see SetWBPos

	Pragma syntax.Pragma // go:xxx function annotations
	// contains filtered or unexported fields
}

Func holds Node fields used only with function-like nodes.

func (*Func) Dupok 

func (f *Func) Dupok() bool

func (*Func) ExportInline 

func (f *Func) ExportInline() bool

func (*Func) HasDefer 

func (f *Func) HasDefer() bool

func (*Func) InlinabilityChecked 

func (f *Func) InlinabilityChecked() bool

func (*Func) InstrumentBody 

func (f *Func) InstrumentBody() bool

func (*Func) IsHiddenClosure 

func (f *Func) IsHiddenClosure() bool

func (*Func) Needctxt 

func (f *Func) Needctxt() bool

func (*Func) NilCheckDisabled 

func (f *Func) NilCheckDisabled() bool

func (*Func) OpenCodedDeferDisallowed 

func (f *Func) OpenCodedDeferDisallowed() bool

func (*Func) ReflectMethod 

func (f *Func) ReflectMethod() bool

func (*Func) SetDupok 

func (f *Func) SetDupok(b bool)

func (*Func) SetExportInline 

func (f *Func) SetExportInline(b bool)

func (*Func) SetHasDefer 

func (f *Func) SetHasDefer(b bool)

func (*Func) SetInlinabilityChecked 

func (f *Func) SetInlinabilityChecked(b bool)

func (*Func) SetInstrumentBody 

func (f *Func) SetInstrumentBody(b bool)

func (*Func) SetIsHiddenClosure 

func (f *Func) SetIsHiddenClosure(b bool)

func (*Func) SetNeedctxt 

func (f *Func) SetNeedctxt(b bool)

func (*Func) SetNilCheckDisabled 

func (f *Func) SetNilCheckDisabled(b bool)

func (*Func) SetOpenCodedDeferDisallowed 

func (f *Func) SetOpenCodedDeferDisallowed(b bool)

func (*Func) SetReflectMethod 

func (f *Func) SetReflectMethod(b bool)

func (*Func) SetWrapper 

func (f *Func) SetWrapper(b bool)

func (*Func) Wrapper 

func (f *Func) Wrapper() bool

type GCProg 

type GCProg struct {
	// contains filtered or unexported fields
}

type InitEntry 

type InitEntry struct {
	Xoffset int64 // struct, array only
	Expr    *Node // bytes of run-time computed expressions
}

type InitOrder 

type InitOrder struct {
	// contains filtered or unexported fields
}

type InitPlan 

type InitPlan struct {
	E []InitEntry
}

type InitSchedule 

type InitSchedule struct {
	// contains filtered or unexported fields
}

An InitSchedule is used to decompose assignment statements into static and dynamic initialization parts. Static initializations are handled by populating variables' linker symbol data, while dynamic initializations are accumulated to be executed in order.

type Inline 

type Inline struct {
	Cost int32 // heuristic cost of inlining this function

	// Copies of Func.Dcl and Nbody for use during inlining.
	Dcl  []*Node
	Body []*Node
}

An Inline holds fields used for function bodies that can be inlined.

type Liveness 

type Liveness struct {
	// contains filtered or unexported fields
}

A collection of global state used by liveness analysis. 用于 liveness 分析的一组全局状态

type LivenessIndex 

type LivenessIndex struct {
	// contains filtered or unexported fields
}

LivenessIndex stores the liveness map index for a safe-point.

func (LivenessIndex) Valid 

func (idx LivenessIndex) Valid() bool

type LivenessMap 

type LivenessMap struct {
	// contains filtered or unexported fields
}

LivenessMap maps from *ssa.Value to LivenessIndex.

func (LivenessMap) Get 

func (m LivenessMap) Get(v *ssa.Value) LivenessIndex

type Mark 

type Mark struct {
	// Pos is the position of the token that marks the scope
	// change.
	Pos src.XPos

	// Scope identifies the innermost scope to the right of Pos.
	Scope ScopeID
}

A Mark represents a scope boundary.

type Mpcplx 

type Mpcplx struct {
	Real Mpflt
	Imag Mpflt
}

Mpcplx represents a complex constant.

func (*Mpcplx) Div 

func (v *Mpcplx) Div(rv *Mpcplx) bool

complex divide v /= rv 

(a, b) / (c, d) = ((a*c + b*d), (b*c - a*d))/(c*c + d*d)

func (*Mpcplx) GoString 

func (v *Mpcplx) GoString() string

func (*Mpcplx) Mul 

func (v *Mpcplx) Mul(rv *Mpcplx)

complex multiply v *= rv 

(a, b) * (c, d) = (a*c - b*d, b*c + a*d)

func (*Mpcplx) String 

func (v *Mpcplx) String() string

type Mpflt 

type Mpflt struct {
	Val big.Float
}

Mpflt represents a floating-point constant.

func (*Mpflt) Add 

func (a *Mpflt) Add(b *Mpflt)

func (*Mpflt) AddFloat64 

func (a *Mpflt) AddFloat64(c float64)

func (*Mpflt) Cmp 

func (a *Mpflt) Cmp(b *Mpflt) int

func (*Mpflt) CmpFloat64 

func (a *Mpflt) CmpFloat64(c float64) int

func (*Mpflt) Float32 

func (a *Mpflt) Float32() float64

func (*Mpflt) Float64 

func (a *Mpflt) Float64() float64

func (*Mpflt) GoString 

func (fvp *Mpflt) GoString() string

func (*Mpflt) Mul 

func (a *Mpflt) Mul(b *Mpflt)

func (*Mpflt) MulFloat64 

func (a *Mpflt) MulFloat64(c float64)

func (*Mpflt) Neg 

func (a *Mpflt) Neg()

func (*Mpflt) Quo 

func (a *Mpflt) Quo(b *Mpflt)

func (*Mpflt) Set 

func (a *Mpflt) Set(b *Mpflt)

func (*Mpflt) SetFloat64 

func (a *Mpflt) SetFloat64(c float64)

func (*Mpflt) SetInt 

func (a *Mpflt) SetInt(b *Mpint)

func (*Mpflt) SetString 

func (a *Mpflt) SetString(as string)

func (*Mpflt) String 

func (f *Mpflt) String() string

func (*Mpflt) Sub 

func (a *Mpflt) Sub(b *Mpflt)

type Mpint 

type Mpint struct {
	Val  big.Int
	Ovf  bool // set if Val overflowed compiler limit (sticky)
	Rune bool // set if syntax indicates default type rune
}

Mpint represents an integer constant.

func (*Mpint) Add 

func (a *Mpint) Add(b *Mpint)

func (*Mpint) And 

func (a *Mpint) And(b *Mpint)

func (*Mpint) AndNot 

func (a *Mpint) AndNot(b *Mpint)

func (*Mpint) Cmp 

func (a *Mpint) Cmp(b *Mpint) int

func (*Mpint) CmpInt64 

func (a *Mpint) CmpInt64(c int64) int

func (*Mpint) GoString 

func (a *Mpint) GoString() string

func (*Mpint) Int64 

func (a *Mpint) Int64() int64

func (*Mpint) Lsh 

func (a *Mpint) Lsh(b *Mpint)

func (*Mpint) Mul 

func (a *Mpint) Mul(b *Mpint)

func (*Mpint) Neg 

func (a *Mpint) Neg()

func (*Mpint) Or 

func (a *Mpint) Or(b *Mpint)

func (*Mpint) Quo 

func (a *Mpint) Quo(b *Mpint)

func (*Mpint) Rem 

func (a *Mpint) Rem(b *Mpint)

func (*Mpint) Rsh 

func (a *Mpint) Rsh(b *Mpint)

func (*Mpint) Set 

func (a *Mpint) Set(b *Mpint)

func (*Mpint) SetFloat 

func (a *Mpint) SetFloat(b *Mpflt) bool

func (*Mpint) SetInt64 

func (a *Mpint) SetInt64(c int64)

func (*Mpint) SetOverflow 

func (a *Mpint) SetOverflow()

func (*Mpint) SetString 

func (a *Mpint) SetString(as string)

func (*Mpint) String 

func (a *Mpint) String() string

func (*Mpint) Sub 

func (a *Mpint) Sub(b *Mpint)

func (*Mpint) Xor 

func (a *Mpint) Xor(b *Mpint)

type Name 

type Name struct {
	Pack      *Node      // real package for import . names
	Pkg       *types.Pkg // pkg for OPACK nodes
	Defn      *Node      // initializing assignment
	Curfn     *Node      // function for local variables
	Param     *Param     // additional fields for ONAME, OTYPE
	Decldepth int32      // declaration loop depth, increased for every loop or label
	Vargen    int32      // unique name for ONAME within a function.  Function outputs are numbered starting at one.
	// contains filtered or unexported fields
}

Name holds Node fields used only by named nodes (ONAME, OTYPE, OPACK, OLABEL, some OLITERAL).

func (*Name) Addrtaken 

func (n *Name) Addrtaken() bool

func (*Name) Assigned 

func (n *Name) Assigned() bool

func (*Name) AutoTemp 

func (n *Name) AutoTemp() bool

func (*Name) Byval 

func (n *Name) Byval() bool

func (*Name) Captured 

func (n *Name) Captured() bool

func (*Name) InlFormal 

func (n *Name) InlFormal() bool

func (*Name) InlLocal 

func (n *Name) InlLocal() bool

func (*Name) IsClosureVar 

func (n *Name) IsClosureVar() bool

func (*Name) IsOutputParamHeapAddr 

func (n *Name) IsOutputParamHeapAddr() bool

func (*Name) Keepalive 

func (n *Name) Keepalive() bool

func (*Name) LibfuzzerExtraCounter 

func (n *Name) LibfuzzerExtraCounter() bool

func (*Name) Needzero 

func (n *Name) Needzero() bool

func (*Name) OpenDeferSlot 

func (n *Name) OpenDeferSlot() bool

func (*Name) Readonly 

func (n *Name) Readonly() bool

func (*Name) SetAddrtaken 

func (n *Name) SetAddrtaken(b bool)

func (*Name) SetAssigned 

func (n *Name) SetAssigned(b bool)

func (*Name) SetAutoTemp 

func (n *Name) SetAutoTemp(b bool)

func (*Name) SetByval 

func (n *Name) SetByval(b bool)

func (*Name) SetCaptured 

func (n *Name) SetCaptured(b bool)

func (*Name) SetInlFormal 

func (n *Name) SetInlFormal(b bool)

func (*Name) SetInlLocal 

func (n *Name) SetInlLocal(b bool)

func (*Name) SetIsClosureVar 

func (n *Name) SetIsClosureVar(b bool)

func (*Name) SetIsOutputParamHeapAddr 

func (n *Name) SetIsOutputParamHeapAddr(b bool)

func (*Name) SetKeepalive 

func (n *Name) SetKeepalive(b bool)

func (*Name) SetLibfuzzerExtraCounter 

func (n *Name) SetLibfuzzerExtraCounter(b bool)

func (*Name) SetNeedzero 

func (n *Name) SetNeedzero(b bool)

func (*Name) SetOpenDeferSlot 

func (n *Name) SetOpenDeferSlot(b bool)

func (*Name) SetReadonly 

func (n *Name) SetReadonly(b bool)

func (*Name) SetUsed 

func (n *Name) SetUsed(b bool)

func (*Name) Used 

func (n *Name) Used() bool

type NilVal 

type NilVal struct{}

type Node 

type Node struct {
	// Tree structure.
	// Generic recursive walks should follow these fields.
	Left  *Node
	Right *Node
	Ninit Nodes
	Nbody Nodes
	List  Nodes
	Rlist Nodes

	// most nodes
	Type *types.Type
	Orig *Node // original form, for printing, and tracking copies of ONAMEs

	// func
	Func *Func

	// ONAME, OTYPE, OPACK, OLABEL, some OLITERAL
	Name *Name

	Sym *types.Sym  // various
	E   interface{} // Opt or Val, see methods below

	// Various. Usually an offset into a struct. For example:
	// - ONAME nodes that refer to local variables use it to identify their stack frame position.
	// - ODOT, ODOTPTR, and ORESULT use it to indicate offset relative to their base address.
	// - OSTRUCTKEY uses it to store the named field's offset.
	// - Named OLITERALs use it to store their ambient iota value.
	// - OINLMARK stores an index into the inlTree data structure.
	// - OCLOSURE uses it to store ambient iota value, if any.
	// Possibly still more uses. If you find any, document them.
	Xoffset int64

	Pos src.XPos

	Esc uint16 // EscXXX

	Op Op
	// contains filtered or unexported fields
}

A Node is a single node in the syntax tree. Actually the syntax tree is a syntax DAG, because there is only one node with Op=ONAME for a given instance of a variable x. The same is true for Op=OTYPE and Op=OLITERAL. See Node.mayBeShared. 

var Curfn *Node

func AutoVar 

func AutoVar(v *ssa.Value) (*Node, int64)

AutoVar returns a *Node and int64 representing the auto variable and offset within it where v should be spilled.

func (*Node) Bool 

func (n *Node) Bool() bool

Bool returns n as a bool. n must be a boolean constant.

func (*Node) Bounded 

func (n *Node) Bounded() bool

func (*Node) CanInt64 

func (n *Node) CanInt64() bool

CanInt64 reports whether it is safe to call Int64() on n.

func (*Node) Class 

func (n *Node) Class() Class

func (*Node) Colas 

func (n *Node) Colas() bool

func (*Node) Diag 

func (n *Node) Diag() bool

func (*Node) Embedded 

func (n *Node) Embedded() bool

func (*Node) Format 

func (n *Node) Format(s fmt.State, verb rune)

func (*Node) HasBreak 

func (n *Node) HasBreak() bool

func (*Node) HasCall 

func (n *Node) HasCall() bool

func (*Node) HasOpt 

func (n *Node) HasOpt() bool

func (*Node) HasVal 

func (n *Node) HasVal() bool

func (*Node) Implicit 

func (n *Node) Implicit() bool

func (*Node) IndexMapLValue 

func (n *Node) IndexMapLValue() bool

func (*Node) Initorder 

func (n *Node) Initorder() uint8

func (*Node) Int64 

func (n *Node) Int64() int64

Int64 returns n as an int64. n must be an integer or rune constant.

func (*Node) Iota 

func (n *Node) Iota() int64

func (*Node) IsAutoTmp 

func (n *Node) IsAutoTmp() bool

IsAutoTmp indicates if n was created by the compiler as a temporary, based on the setting of the .AutoTemp flag in n's Name.

func (*Node) IsDDD 

func (n *Node) IsDDD() bool

func (*Node) IsMethod 

func (n *Node) IsMethod() bool

IsMethod reports whether n is a method. n must be a function or a method.

func (*Node) IsSynthetic 

func (n *Node) IsSynthetic() bool

func (*Node) Likely 

func (n *Node) Likely() bool

func (*Node) Line 

func (n *Node) Line() string

Line returns n's position as a string. If n has been inlined, it uses the outermost position where n has been inlined.

func (*Node) NoInline 

func (n *Node) NoInline() bool

func (*Node) NonNil 

func (n *Node) NonNil() bool

func (*Node) Opt 

func (n *Node) Opt() interface{}

Opt returns the optimizer data for the node.

func (*Node) ResetAux 

func (n *Node) ResetAux()

func (*Node) SetBounded 

func (n *Node) SetBounded(b bool)

func (*Node) SetClass 

func (n *Node) SetClass(b Class)

func (*Node) SetColas 

func (n *Node) SetColas(b bool)

func (*Node) SetDiag 

func (n *Node) SetDiag(b bool)

func (*Node) SetEmbedded 

func (n *Node) SetEmbedded(b bool)

func (*Node) SetHasBreak 

func (n *Node) SetHasBreak(b bool)

func (*Node) SetHasCall 

func (n *Node) SetHasCall(b bool)

func (*Node) SetHasOpt 

func (n *Node) SetHasOpt(b bool)

func (*Node) SetHasVal 

func (n *Node) SetHasVal(b bool)

func (*Node) SetImplicit 

func (n *Node) SetImplicit(b bool)

func (*Node) SetIndexMapLValue 

func (n *Node) SetIndexMapLValue(b bool)

func (*Node) SetInitorder 

func (n *Node) SetInitorder(b uint8)

func (*Node) SetIota 

func (n *Node) SetIota(x int64)

func (*Node) SetIsDDD 

func (n *Node) SetIsDDD(b bool)

func (*Node) SetLikely 

func (n *Node) SetLikely(b bool)

func (*Node) SetNoInline 

func (n *Node) SetNoInline(b bool)

func (*Node) SetNonNil 

func (n *Node) SetNonNil(b bool)

func (*Node) SetOpt 

func (n *Node) SetOpt(x interface{})

SetOpt sets the optimizer data for the node, which must not have been used with SetVal. SetOpt(nil) is ignored for Vals to simplify call sites that are clearing Opts.

func (*Node) SetSliceBounds 

func (n *Node) SetSliceBounds(low, high, max *Node)

SetSliceBounds sets n's slice bounds, where n is a slice expression. n must be a slice expression. If max is non-nil, n must be a full slice expression.

func (*Node) SetSubOp 

func (n *Node) SetSubOp(op Op)

func (*Node) SetTChanDir 

func (n *Node) SetTChanDir(dir types.ChanDir)

func (*Node) SetTransient 

func (n *Node) SetTransient(b bool)

func (*Node) SetTypecheck 

func (n *Node) SetTypecheck(b uint8)

func (*Node) SetVal 

func (n *Node) SetVal(v Val)

SetVal sets the Val for the node, which must not have been used with SetOpt.

func (*Node) SetWalkdef 

func (n *Node) SetWalkdef(b uint8)

func (*Node) SliceBounds 

func (n *Node) SliceBounds() (low, high, max *Node)

SliceBounds returns n's slice bounds: low, high, and max in expr[low:high:max]. n must be a slice expression. max is nil if n is a simple slice expression.

func (*Node) StorageClass 

func (n *Node) StorageClass() ssa.StorageClass

func (*Node) String 

func (n *Node) String() string

func (*Node) SubOp 

func (n *Node) SubOp() Op

func (*Node) TChanDir 

func (n *Node) TChanDir() types.ChanDir

func (*Node) Transient 

func (n *Node) Transient() bool

func (*Node) Typ 

func (n *Node) Typ() *types.Type

func (*Node) Typecheck 

func (n *Node) Typecheck() uint8

func (*Node) Val 

func (n *Node) Val() Val

Val returns the Val for the node.

func (*Node) Walkdef 

func (n *Node) Walkdef() uint8

type NodeSet 

type NodeSet map[*Node]struct{}

NodeSet is a set of Nodes.

func (*NodeSet) Add 

func (s *NodeSet) Add(n *Node)

Add adds n to s.

func (NodeSet) Has 

func (s NodeSet) Has(n *Node) bool

Has reports whether s contains n.

func (NodeSet) Sorted 

func (s NodeSet) Sorted(less func(*Node, *Node) bool) []*Node

Sorted returns s sorted according to less.

type Nodes 

type Nodes struct {
	// contains filtered or unexported fields
}

Nodes is a pointer to a slice of *Node. For fields that are not used in most nodes, this is used instead of a slice to save space.

func (Nodes) Addr 

func (n Nodes) Addr(i int) **Node

Addr returns the address of the i'th element of Nodes. It panics if n does not have at least i+1 elements.

func (*Nodes) Append 

func (n *Nodes) Append(a ...*Node)

Append appends entries to Nodes.

func (*Nodes) AppendNodes 

func (n *Nodes) AppendNodes(n2 *Nodes)

AppendNodes appends the contents of *n2 to n, then clears n2.

func (Nodes) First 

func (n Nodes) First() *Node

First returns the first element of Nodes (same as n.Index(0)). It panics if n has no elements.

func (Nodes) Format 

func (n Nodes) Format(s fmt.State, verb rune)

func (Nodes) Index 

func (n Nodes) Index(i int) *Node

Index returns the i'th element of Nodes. It panics if n does not have at least i+1 elements.

func (Nodes) Len 

func (n Nodes) Len() int

Len returns the number of entries in Nodes.

func (*Nodes) MoveNodes 

func (n *Nodes) MoveNodes(n2 *Nodes)

MoveNodes sets n to the contents of n2, then clears n2.

func (*Nodes) Prepend 

func (n *Nodes) Prepend(a ...*Node)

Prepend prepends entries to Nodes. If a slice is passed in, this will take ownership of it.

func (Nodes) Second 

func (n Nodes) Second() *Node

Second returns the second element of Nodes (same as n.Index(1)). It panics if n has fewer than two elements.

func (*Nodes) Set 

func (n *Nodes) Set(s []*Node)

Set sets n to a slice. This takes ownership of the slice.

func (*Nodes) Set1 

func (n *Nodes) Set1(n1 *Node)

Set1 sets n to a slice containing a single node.

func (*Nodes) Set2 

func (n *Nodes) Set2(n1, n2 *Node)

Set2 sets n to a slice containing two nodes.

func (*Nodes) Set3 

func (n *Nodes) Set3(n1, n2, n3 *Node)

Set3 sets n to a slice containing three nodes.

func (Nodes) SetFirst 

func (n Nodes) SetFirst(node *Node)

SetFirst sets the first element of Nodes to node. It panics if n does not have at least one elements.

func (Nodes) SetIndex 

func (n Nodes) SetIndex(i int, node *Node)

SetIndex sets the i'th element of Nodes to node. It panics if n does not have at least i+1 elements.

func (Nodes) SetSecond 

func (n Nodes) SetSecond(node *Node)

SetSecond sets the second element of Nodes to node. It panics if n does not have at least two elements.

func (Nodes) Slice 

func (n Nodes) Slice() []*Node

Slice returns the entries in Nodes as a slice. Changes to the slice entries (as in s[i] = n) will be reflected in the Nodes.

func (Nodes) String 

func (n Nodes) String() string

type Op 

type Op uint8
const (
	OXXX Op = iota

	// names
	ONAME    // var or func name
	ONONAME  // unnamed arg or return value: f(int, string) (int, error) { etc }
	OTYPE    // type name
	OPACK    // import
	OLITERAL // literal

	// expressions
	OADD          // Left + Right
	OSUB          // Left - Right
	OOR           // Left | Right
	OXOR          // Left ^ Right
	OADDSTR       // +{List} (string addition, list elements are strings)
	OADDR         // &Left
	OANDAND       // Left && Right
	OAPPEND       // append(List); after walk, Left may contain elem type descriptor
	OBYTES2STR    // Type(Left) (Type is string, Left is a []byte)
	OBYTES2STRTMP // Type(Left) (Type is string, Left is a []byte, ephemeral)
	ORUNES2STR    // Type(Left) (Type is string, Left is a []rune)
	OSTR2BYTES    // Type(Left) (Type is []byte, Left is a string)
	OSTR2BYTESTMP // Type(Left) (Type is []byte, Left is a string, ephemeral)
	OSTR2RUNES    // Type(Left) (Type is []rune, Left is a string)
	OAS           // Left = Right or (if Colas=true) Left := Right
	OAS2          // List = Rlist (x, y, z = a, b, c)
	OAS2DOTTYPE   // List = Right (x, ok = I.(int))
	OAS2FUNC      // List = Right (x, y = f())
	OAS2MAPR      // List = Right (x, ok = m["foo"])
	OAS2RECV      // List = Right (x, ok = <-c)
	OASOP         // Left Etype= Right (x += y)
	OCALL         // Left(List) (function call, method call or type conversion)

	// OCALLFUNC, OCALLMETH, and OCALLINTER have the same structure.
	// Prior to walk, they are: Left(List), where List is all regular arguments.
	// If present, Right is an ODDDARG that holds the
	// generated slice used in a call to a variadic function.
	// After walk, List is a series of assignments to temporaries,
	// and Rlist is an updated set of arguments, including any ODDDARG slice.
	// TODO(josharian/khr): Use Ninit instead of List for the assignments to temporaries. See CL 114797.
	OCALLFUNC  // Left(List/Rlist) (function call f(args))
	OCALLMETH  // Left(List/Rlist) (direct method call x.Method(args))
	OCALLINTER // Left(List/Rlist) (interface method call x.Method(args))
	OCALLPART  // Left.Right (method expression x.Method, not called)
	OCAP       // cap(Left)
	OCLOSE     // close(Left)
	OCLOSURE   // func Type { Body } (func literal)
	OCOMPLIT   // Right{List} (composite literal, not yet lowered to specific form)
	OMAPLIT    // Type{List} (composite literal, Type is map)
	OSTRUCTLIT // Type{List} (composite literal, Type is struct)
	OARRAYLIT  // Type{List} (composite literal, Type is array)
	OSLICELIT  // Type{List} (composite literal, Type is slice) Right.Int64() = slice length.
	OPTRLIT    // &Left (left is composite literal)
	OCONV      // Type(Left) (type conversion)
	OCONVIFACE // Type(Left) (type conversion, to interface)
	OCONVNOP   // Type(Left) (type conversion, no effect)
	OCOPY      // copy(Left, Right)
	ODCL       // var Left (declares Left of type Left.Type)

	// Used during parsing but don't last.
	ODCLFUNC  // func f() or func (r) f()
	ODCLFIELD // struct field, interface field, or func/method argument/return value.
	ODCLCONST // const pi = 3.14
	ODCLTYPE  // type Int int or type Int = int

	ODELETE      // delete(Left, Right)
	ODOT         // Left.Sym (Left is of struct type)
	ODOTPTR      // Left.Sym (Left is of pointer to struct type)
	ODOTMETH     // Left.Sym (Left is non-interface, Right is method name)
	ODOTINTER    // Left.Sym (Left is interface, Right is method name)
	OXDOT        // Left.Sym (before rewrite to one of the preceding)
	ODOTTYPE     // Left.Right or Left.Type (.Right during parsing, .Type once resolved); after walk, .Right contains address of interface type descriptor and .Right.Right contains address of concrete type descriptor
	ODOTTYPE2    // Left.Right or Left.Type (.Right during parsing, .Type once resolved; on rhs of OAS2DOTTYPE); after walk, .Right contains address of interface type descriptor
	OEQ          // Left == Right
	ONE          // Left != Right
	OLT          // Left < Right
	OLE          // Left <= Right
	OGE          // Left >= Right
	OGT          // Left > Right
	ODEREF       // *Left
	OINDEX       // Left[Right] (index of array or slice)
	OINDEXMAP    // Left[Right] (index of map)
	OKEY         // Left:Right (key:value in struct/array/map literal)
	OSTRUCTKEY   // Sym:Left (key:value in struct literal, after type checking)
	OLEN         // len(Left)
	OMAKE        // make(List) (before type checking converts to one of the following)
	OMAKECHAN    // make(Type, Left) (type is chan)
	OMAKEMAP     // make(Type, Left) (type is map)
	OMAKESLICE   // make(Type, Left, Right) (type is slice)
	OMUL         // Left * Right
	ODIV         // Left / Right
	OMOD         // Left % Right
	OLSH         // Left << Right
	ORSH         // Left >> Right
	OAND         // Left & Right
	OANDNOT      // Left &^ Right
	ONEW         // new(Left); corresponds to calls to new in source code
	ONEWOBJ      // runtime.newobject(n.Type); introduced by walk; Left is type descriptor
	ONOT         // !Left
	OBITNOT      // ^Left
	OPLUS        // +Left
	ONEG         // -Left
	OOROR        // Left || Right
	OPANIC       // panic(Left)
	OPRINT       // print(List)
	OPRINTN      // println(List)
	OPAREN       // (Left)
	OSEND        // Left <- Right
	OSLICE       // Left[List[0] : List[1]] (Left is untypechecked or slice)
	OSLICEARR    // Left[List[0] : List[1]] (Left is array)
	OSLICESTR    // Left[List[0] : List[1]] (Left is string)
	OSLICE3      // Left[List[0] : List[1] : List[2]] (Left is untypedchecked or slice)
	OSLICE3ARR   // Left[List[0] : List[1] : List[2]] (Left is array)
	OSLICEHEADER // sliceheader{Left, List[0], List[1]} (Left is unsafe.Pointer, List[0] is length, List[1] is capacity)
	ORECOVER     // recover()
	ORECV        // <-Left
	ORUNESTR     // Type(Left) (Type is string, Left is rune)
	OSELRECV     // Left = <-Right.Left: (appears as .Left of OCASE; Right.Op == ORECV)
	OSELRECV2    // List = <-Right.Left: (appears as .Left of OCASE; count(List) == 2, Right.Op == ORECV)
	OIOTA        // iota
	OREAL        // real(Left)
	OIMAG        // imag(Left)
	OCOMPLEX     // complex(Left, Right) or complex(List[0]) where List[0] is a 2-result function call
	OALIGNOF     // unsafe.Alignof(Left)
	OOFFSETOF    // unsafe.Offsetof(Left)
	OSIZEOF      // unsafe.Sizeof(Left)

	// statements
	OBLOCK    // { List } (block of code)
	OBREAK    // break [Sym]
	OCASE     // case List: Nbody (List==nil means default)
	OCONTINUE // continue [Sym]
	ODEFER    // defer Left (Left must be call)
	OEMPTY    // no-op (empty statement)
	OFALL     // fallthrough
	OFOR      // for Ninit; Left; Right { Nbody }
	// OFORUNTIL is like OFOR, but the test (Left) is applied after the body:
	// 	Ninit
	// 	top: { Nbody }   // Execute the body at least once
	// 	cont: Right
	// 	if Left {        // And then test the loop condition
	// 		List     // Before looping to top, execute List
	// 		goto top
	// 	}
	// OFORUNTIL is created by walk. There's no way to write this in Go code.
	OFORUNTIL
	OGOTO   // goto Sym
	OIF     // if Ninit; Left { Nbody } else { Rlist }
	OLABEL  // Sym:
	OGO     // go Left (Left must be call)
	ORANGE  // for List = range Right { Nbody }
	ORETURN // return List
	OSELECT // select { List } (List is list of OCASE)
	OSWITCH // switch Ninit; Left { List } (List is a list of OCASE)
	OTYPESW // Left = Right.(type) (appears as .Left of OSWITCH)

	// types
	OTCHAN   // chan int
	OTMAP    // map[string]int
	OTSTRUCT // struct{}
	OTINTER  // interface{}
	OTFUNC   // func()
	OTARRAY  // []int, [8]int, [N]int or [...]int

	// misc
	ODDD        // func f(args ...int) or f(l...) or var a = [...]int{0, 1, 2}.
	ODDDARG     // func f(args ...int), introduced by escape analysis.
	OINLCALL    // intermediary representation of an inlined call.
	OEFACE      // itable and data words of an empty-interface value.
	OITAB       // itable word of an interface value.
	OIDATA      // data word of an interface value in Left
	OSPTR       // base pointer of a slice or string.
	OCLOSUREVAR // variable reference at beginning of closure function
	OCFUNC      // reference to c function pointer (not go func value)
	OCHECKNIL   // emit code to ensure pointer/interface not nil
	OVARDEF     // variable is about to be fully initialized
	OVARKILL    // variable is dead
	OVARLIVE    // variable is alive
	ORESULT     // result of a function call; Xoffset is stack offset
	OINLMARK    // start of an inlined body, with file/line of caller. Xoffset is an index into the inline tree.

	// arch-specific opcodes
	ORETJMP // return to other function
	OGETG   // runtime.getg() (read g pointer)

	OEND
)

Node ops.

func (Op) Format 

func (o Op) Format(s fmt.State, verb rune)

func (Op) GoString 

func (o Op) GoString() string

func (Op) IsSlice3 

func (o Op) IsSlice3() bool

IsSlice3 reports whether o is a slice3 op (OSLICE3, OSLICE3ARR). o must be a slicing op.

func (Op) String 

func (i Op) String() string

type Order 

type Order struct {
	// contains filtered or unexported fields
}

Order holds state during the ordering process.

type Param 

type Param struct {
	Ntype    *Node
	Heapaddr *Node // temp holding heap address of param

	// ONAME PAUTOHEAP
	Stackcopy *Node // the PPARAM/PPARAMOUT on-stack slot (moved func params only)

	// ONAME closure linkage
	// Consider:
	//
	//	func f() {
	//		x := 1 // x1
	//		func() {
	//			use(x) // x2
	//			func() {
	//				use(x) // x3
	//				--- parser is here ---
	//			}()
	//		}()
	//	}
	//
	// There is an original declaration of x and then a chain of mentions of x
	// leading into the current function. Each time x is mentioned in a new closure,
	// we create a variable representing x for use in that specific closure,
	// since the way you get to x is different in each closure.
	//
	// Let's number the specific variables as shown in the code:
	// x1 is the original x, x2 is when mentioned in the closure,
	// and x3 is when mentioned in the closure in the closure.
	//
	// We keep these linked (assume N > 1):
	//
	//   - x1.Defn = original declaration statement for x (like most variables)
	//   - x1.Innermost = current innermost closure x (in this case x3), or nil for none
	//   - x1.IsClosureVar() = false
	//
	//   - xN.Defn = x1, N > 1
	//   - xN.IsClosureVar() = true, N > 1
	//   - x2.Outer = nil
	//   - xN.Outer = x(N-1), N > 2
	//
	//
	// When we look up x in the symbol table, we always get x1.
	// Then we can use x1.Innermost (if not nil) to get the x
	// for the innermost known closure function,
	// but the first reference in a closure will find either no x1.Innermost
	// or an x1.Innermost with .Funcdepth < Funcdepth.
	// In that case, a new xN must be created, linked in with:
	//
	//     xN.Defn = x1
	//     xN.Outer = x1.Innermost
	//     x1.Innermost = xN
	//
	// When we finish the function, we'll process its closure variables
	// and find xN and pop it off the list using:
	//
	//     x1 := xN.Defn
	//     x1.Innermost = xN.Outer
	//
	// We leave xN.Innermost set so that we can still get to the original
	// variable quickly. Not shown here, but once we're
	// done parsing a function and no longer need xN.Outer for the
	// lexical x reference links as described above, closurebody
	// recomputes xN.Outer as the semantic x reference link tree,
	// even filling in x in intermediate closures that might not
	// have mentioned it along the way to inner closures that did.
	// See closurebody for details.
	//
	// During the eventual compilation, then, for closure variables we have:
	//
	//     xN.Defn = original variable
	//     xN.Outer = variable captured in next outward scope
	//                to make closure where xN appears
	//
	// Because of the sharding of pieces of the node, x.Defn means x.Name.Defn
	// and x.Innermost/Outer means x.Name.Param.Innermost/Outer.
	Innermost *Node
	Outer     *Node

	// OTYPE
	//
	// TODO: Should Func pragmas also be stored on the Name?
	Pragma syntax.Pragma
	Alias  bool // node is alias for Ntype (only used when type-checking ODCLTYPE)
}

type Progs 

type Progs struct {
	Text *obj.Prog // ATEXT Prog for this function
	// contains filtered or unexported fields
}

Progs accumulates Progs for a function and converts them into machine code.

func (*Progs) Appendpp 

func (pp *Progs) Appendpp(p *obj.Prog, as obj.As, ftype obj.AddrType, freg int16, foffset int64, ttype obj.AddrType, treg int16, toffset int64) *obj.Prog

func (*Progs) Flush 

func (pp *Progs) Flush()

Flush converts from pp to machine code.

func (*Progs) Free 

func (pp *Progs) Free()

Free clears pp and any associated resources.

func (*Progs) NewProg 

func (pp *Progs) NewProg() *obj.Prog

func (*Progs) Prog 

func (pp *Progs) Prog(as obj.As) *obj.Prog

Prog adds a Prog with instruction As to pp.

type SSAGenState 

type SSAGenState struct {

	// Branches remembers all the branch instructions we've seen
	// and where they would like to go.
	Branches []Branch

	// 387 port: maps from SSE registers (REG_X?) to 387 registers (REG_F?)
	SSEto387 map[int16]int16
	// Some architectures require a 64-bit temporary for FP-related register shuffling. Examples include x86-387, PPC, and Sparc V8.
	ScratchFpMem *Node

	// wasm: The number of values on the WebAssembly stack. This is only used as a safeguard.
	OnWasmStackSkipped int
	// contains filtered or unexported fields
}

SSAGenState contains state needed during Prog generation.

func (*SSAGenState) AddrScratch 

func (s *SSAGenState) AddrScratch(a *obj.Addr)

func (*SSAGenState) Br 

func (s *SSAGenState) Br(op obj.As, target *ssa.Block) *obj.Prog

Br emits a single branch instruction and returns the instruction. Not all architectures need the returned instruction, but otherwise the boilerplate is common to all.

func (*SSAGenState) Call 

func (s *SSAGenState) Call(v *ssa.Value) *obj.Prog

Call returns a new CALL instruction for the SSA value v. It uses PrepareCall to prepare the call.

func (*SSAGenState) DebugFriendlySetPosFrom 

func (s *SSAGenState) DebugFriendlySetPosFrom(v *ssa.Value)

DebugFriendlySetPosFrom adjusts Pos.IsStmt subject to heuristics that reduce "jumpy" line number churn when debugging. Spill/fill/copy instructions from the register allocator, phi functions, and instructions with a no-pos position are examples of instructions that can cause churn.

func (*SSAGenState) FPJump 

func (s *SSAGenState) FPJump(b, next *ssa.Block, jumps *[2][2]FloatingEQNEJump)

func (*SSAGenState) Pc 

func (s *SSAGenState) Pc() *obj.Prog

Pc returns the current Prog.

func (*SSAGenState) PrepareCall 

func (s *SSAGenState) PrepareCall(v *ssa.Value)

PrepareCall prepares to emit a CALL instruction for v and does call-related bookkeeping. It must be called immediately before emitting the actual CALL instruction, since it emits PCDATA for the stack map at the call (calls are safe points).

func (*SSAGenState) Prog 

func (s *SSAGenState) Prog(as obj.As) *obj.Prog

Prog appends a new Prog.

func (*SSAGenState) SetPos 

func (s *SSAGenState) SetPos(pos src.XPos)

SetPos sets the current source position.

func (*SSAGenState) UseArgs 

func (s *SSAGenState) UseArgs(n int64)

UseArgs records the fact that an instruction needs a certain amount of callee args space for its use.

type ScopeID 

type ScopeID int32

A ScopeID represents a lexical scope within a function.

type Sig 

type Sig struct {
	// contains filtered or unexported fields
}
type Symlink struct {
	// contains filtered or unexported fields
}

type Timings 

type Timings struct {
	// contains filtered or unexported fields
}

Timings collects the execution times of labeled phases which are added trough a sequence of Start/Stop calls. Events may be associated with each phase via AddEvent.

func (*Timings) AddEvent 

func (t *Timings) AddEvent(size int64, unit string)

AddEvent associates an event, i.e., a count, or an amount of data, with the most recently started or stopped phase; or the very first phase if Start or Stop hasn't been called yet. The unit specifies the unit of measurement (e.g., MB, lines, no. of funcs, etc.).

func (*Timings) Start 

func (t *Timings) Start(labels ...string)

Start marks the beginning of a new phase and implicitly stops the previous phase. The phase name is the colon-separated concatenation of the labels.

func (*Timings) Stop 

func (t *Timings) Stop(labels ...string)

Stop marks the end of a phase and implicitly starts a new phase. The labels are added to the labels of the ended phase.

func (*Timings) Write 

func (t *Timings) Write(w io.Writer, prefix string)

Write prints the phase times to w. The prefix is printed at the start of each line.

type Val 

type Val struct {
	// U contains one of:
	// bool     bool when Ctype() == CTBOOL
	// *Mpint   int when Ctype() == CTINT, rune when Ctype() == CTRUNE
	// *Mpflt   float when Ctype() == CTFLT
	// *Mpcplx  pair of floats when Ctype() == CTCPLX
	// string   string when Ctype() == CTSTR
	// *Nilval  when Ctype() == CTNIL
	U interface{}
}

func (Val) Ctype 

func (v Val) Ctype() Ctype

func (Val) Format 

func (v Val) Format(s fmt.State, verb rune)

func (Val) Interface 

func (v Val) Interface() interface{}

Interface returns the constant value stored in v as an interface{}. It returns int64s for ints and runes, float64s for floats, complex128s for complex values, and nil for constant nils.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.