README
¶
bchd
bchd is an alternative full node bitcoin cash implementation written in Go (golang).
This project is a port of the btcd codebase to Bitcoin Cash. It provides a high powered and reliable blockchain server which makes it a suitable backend to serve blockchain data to lite clients and block explorers or to power your local wallet.
bchd does not include any wallet functionality by design as it makes the codebase more modular and easy to maintain. The bchwallet is a separate application that provides a secure Bitcoin Cash wallet that communicates with your running bchd instance via the API.
Table of Contents
Requirements
Go 1.13.15 or newer.
Install
Install Pre-built Packages
The easiest way to run the server is to download a pre-built binary. You can find binaries of our latest release for each operating system at the releases page.
Build from Source
If you prefer to install from source do the following:
-
Install Go according to the installation instructions here: http://golang.org/doc/install
-
Run the following commands to obtain bchd, all dependencies, and install it:
go get github.com/cctip/bchd
This will download the source code into your GOPATH and compile bchd and install it in your path.
For developers if you wish to place the working directory outside your GOPATH you can do so with Go >=1.12.x as follows:
mkdir workspace
cd workspace
git clone https://github.com/cctip/bchd.git
cd bchd
go install (or build or run, etc)
Dependencies will be automatically installed to $GOPATH/pkg/mod.
If you are a bchd contributor and would like to change the default config file (bchd.conf), make any changes to sample-bchd.conf and then run the following commands:
go-bindata sample-bchd.conf # requires github.com/go-bindata/go-bindata/
gofmt -s -w bindata.go
Getting Started
To start bchd with default options just run:
./bchd
You'll find a large number of runtime options with the help flag. All of them can also be set in a config file. See the sample config file for an example of how to use it.
./bchd --help
You can use the common json RPC interface through the bchctl command:
./bchctl --help
./bchctl --listcommands
Bchd separates the node and the wallet. Commands for the wallet will work when you are also running bchwallet:
./bchctl -u username -P password --wallet getnewaddress
Docker
Building and running bchd in docker is quite painless. To build the image:
docker build . -t bchd
To run the image:
# Use stop-timeout to make sure the container exits cleanly!
docker run --stop-timeout=1200 bchd
To run bchctl and connect to your bchd instance:
# Find the running bchd container.
docker ps
# Exec bchctl.
docker exec <container> bchctl <command>
Documentation
The documentation is a work-in-progress. It is located in the docs folder.
Contributing
Contributions are definitely welcome! Please read the contributing guidelines before starting.
Security Disclosures
To report security issues please contact:
Chris Pacia (ctpacia@gmail.com) - GPG Fingerprint: 0150 2502 DD3A 928D CE52 8CB9 B895 6DBF EE7C 105C
or
Josh Ellithorpe (quest@mac.com) - GPG Fingerprint: B6DE 3514 E07E 30BB 5F40 8D74 E49B 7E00 0022 8DDD
License
bchd is licensed under the copyfree ISC License.
Documentation
¶
Overview ¶
Code generated for package main by go-bindata DO NOT EDIT. (@generated) sources: sample-bchd.conf
bchd is a full-node bitcoin cash implementation written in Go.
The default options are sane for most users. This means bchd will work 'out of the box' for most users. However, there are also a wide variety of flags that can be used to control it.
The following section provides a usage overview which enumerates the flags. An interesting point to note is that the long form of all of these options (except -C) can be specified in a configuration file that is automatically parsed when bchd starts up. By default, the configuration file is located at ~/.bchd/bchd.conf on POSIX-style operating systems and %LOCALAPPDATA%\bchd\bchd.conf on Windows. The -C (--configfile) flag, as shown below, can be used to override this location.
Usage:
bchd [OPTIONS]
Application Options:
-V, --version Display version information and exit
-C, --configfile= Path to configuration file
-b, --datadir= Directory to store data
--logdir= Directory to log output.
-a, --addpeer= Add a peer to connect with at startup
--connect= Connect only to the specified peers at startup
--nolisten Disable listening for incoming connections -- NOTE:
Listening is automatically disabled if the --connect
or --proxy options are used without also specifying
listen interfaces via --listen
--listen= Add an interface/port to listen for connections
(default all interfaces port: 8333, testnet: 18333)
--maxpeers= Max number of inbound and outbound peers (125)
--nobanning Disable banning of misbehaving peers
--banduration= How long to ban misbehaving peers. Valid time units
are {s, m, h}. Minimum 1 second (24h0m0s)
--banthreshold= Maximum allowed ban score before disconnecting and
banning misbehaving peers.
--whitelist= Add an IP network or IP that will not be banned.
(eg. 192.168.1.0/24 or ::1)
-u, --rpcuser= Username for RPC connections
-P, --rpcpass= Password for RPC connections
--rpclimituser= Username for limited RPC connections
--rpclimitpass= Password for limited RPC connections
--rpclisten= Add an interface/port to listen for RPC connections
(default port: 8334, testnet: 18334)
--rpccert= File containing the certificate file
--rpckey= File containing the certificate key
--rpcmaxclients= Max number of RPC clients for standard connections
(10)
--rpcmaxwebsockets= Max number of RPC websocket connections (25)
--rpcquirks Mirror some JSON-RPC quirks of Bitcoin Core -- NOTE:
Discouraged unless interoperability issues need to
be worked around
--norpc Disable built-in RPC server -- NOTE: The RPC server
is disabled by default if no rpcuser/rpcpass or
rpclimituser/rpclimitpass is specified
--notls Disable TLS for the RPC server -- NOTE: This is only
allowed if the RPC server is bound to localhost
--nodnsseed Disable DNS seeding for peers
--externalip= Add an ip to the list of local addresses we claim to
listen on to peers
--proxy= Connect via SOCKS5 proxy (eg. 127.0.0.1:9050)
--proxyuser= Username for proxy server
--proxypass= Password for proxy server
--onion= Connect to tor hidden services via SOCKS5 proxy
(eg. 127.0.0.1:9050)
--onionuser= Username for onion proxy server
--onionpass= Password for onion proxy server
--noonion Disable connecting to tor hidden services
--torisolation Enable Tor stream isolation by randomizing user
credentials for each connection.
--testnet Use the test network
--regtest Use the regression test network
--simnet Use the simulation test network
--addcheckpoint= Add a custom checkpoint. Format: '<height>:<hash>'
--nocheckpoints Disable built-in checkpoints. Don't do this unless
you know what you're doing.
--uacomment= Comment to add to the user agent --
See BIP 14 for more information.
--dbtype= Database backend to use for the Block Chain (ffldb)
--profile= Enable HTTP profiling on given port -- NOTE port
must be between 1024 and 65536
--cpuprofile= Write CPU profile to the specified file
-d, --debuglevel= Logging level for all subsystems {trace, debug,
info, warn, error, critical} -- You may also specify
<subsystem>=<level>,<subsystem2>=<level>,... to set
the log level for individual subsystems -- Use show
to list available subsystems (info)
--upnp Use UPnP to map our listening port outside of NAT
--minrelaytxfee= The minimum transaction fee in BCH/kB to be
considered a non-zero fee.
--limitfreerelay= Limit relay of transactions with no transaction fee
to the given amount in thousands of bytes per
minute (15)
--norelaypriority Do not require free or low-fee transactions to have
high priority for relaying
--maxorphantx= Max number of orphan transactions to keep in memory
(100)
--generate Generate (mine) bitcoins using the CPU
--miningaddr= Add the specified payment address to the list of
addresses to use for generated blocks -- At least
one address is required if the generate option is
set
--blockminsize= Mininum block size in bytes to be used when creating
a block
--blockmaxsize= Maximum block size in bytes to be used when creating
a block (750000)
--blockprioritysize= Size in bytes for high-priority/low-fee transactions
when creating a block (50000)
--nopeerbloomfilters Disable bloom filtering support.
--nocfilters Disable committed filtering (CF) support.
--sigcachemaxsize= The maximum number of entries in the signature
verification cache.
--blocksonly Do not accept transactions from remote peers.
--relaynonstd Relay non-standard transactions regardless of the
default settings for the active network.
--rejectnonstd Reject non-standard transactions regardless of the
default settings for the active network.
Help Options:
-h, --help Show this help message
Source Files
¶
Directories
¶
| Path | Synopsis |
|---|---|
|
Package addrmgr implements concurrency safe Bitcoin Cash address manager.
|
Package addrmgr implements concurrency safe Bitcoin Cash address manager. |
|
Package bchec implements support for the elliptic curves needed for bitcoin.
|
Package bchec implements support for the elliptic curves needed for bitcoin. |
|
pb
Package pb is a reverse proxy.
|
Package pb is a reverse proxy. |
|
Package blockchain implements bitcoin block handling and chain selection rules.
|
Package blockchain implements bitcoin block handling and chain selection rules. |
|
fullblocktests
Package fullblocktests provides a set of block consensus validation tests.
|
Package fullblocktests provides a set of block consensus validation tests. |
|
indexers
Package indexers implements optional block chain indexes.
|
Package indexers implements optional block chain indexes. |
|
Package btcjson provides primitives for working with the bitcoin JSON-RPC API.
|
Package btcjson provides primitives for working with the bitcoin JSON-RPC API. |
|
Package chaincfg defines chain configuration parameters.
|
Package chaincfg defines chain configuration parameters. |
|
chainhash
Package chainhash provides abstracted hash functionality.
|
Package chainhash provides abstracted hash functionality. |
|
cmd
|
|
|
Package connmgr implements a generic Bitcoin network connection manager.
|
Package connmgr implements a generic Bitcoin network connection manager. |
|
Package database provides a block and metadata storage database.
|
Package database provides a block and metadata storage database. |
|
ffldb
Package ffldb implements a driver for the database package that uses leveldb for the backing metadata and flat files for block storage.
|
Package ffldb implements a driver for the database package that uses leveldb for the backing metadata and flat files for block storage. |
|
internal/treap
Package treap implements a treap data structure that is used to hold ordered key/value pairs using a combination of binary search tree and heap semantics.
|
Package treap implements a treap data structure that is used to hold ordered key/value pairs using a combination of binary search tree and heap semantics. |
|
rpctest
Package rpctest provides a btcd-specific RPC testing harness crafting and executing integration tests by driving a `bchd` instance via the `RPC` interface.
|
Package rpctest provides a btcd-specific RPC testing harness crafting and executing integration tests by driving a `bchd` instance via the `RPC` interface. |
|
Package mempool provides a policy-enforced pool of unmined bitcoin cash transactions.
|
Package mempool provides a policy-enforced pool of unmined bitcoin cash transactions. |
|
Package netsync implements a concurrency safe block syncing protocol.
|
Package netsync implements a concurrency safe block syncing protocol. |
|
Package peer provides a common base for creating and managing Bitcoin cash network peers.
|
Package peer provides a common base for creating and managing Bitcoin cash network peers. |
|
Package rpcclient implements a websocket-enabled Bitcoin JSON-RPC client.
|
Package rpcclient implements a websocket-enabled Bitcoin JSON-RPC client. |
|
Package txscript implements the bitcoin transaction script language.
|
Package txscript implements the bitcoin transaction script language. |
|
Package wire implements the bitcoin wire protocol.
|
Package wire implements the bitcoin wire protocol. |