Documentation ¶
Overview ¶
Package codepipeline provides a client for AWS CodePipeline.
Index ¶
- Constants
- type AWSSessionCredentials
- type AcknowledgeJobInput
- type AcknowledgeJobOutput
- type AcknowledgeThirdPartyJobInput
- type AcknowledgeThirdPartyJobOutput
- type ActionConfiguration
- type ActionConfigurationProperty
- type ActionContext
- type ActionDeclaration
- type ActionExecution
- type ActionRevision
- type ActionState
- type ActionType
- type ActionTypeId
- type ActionTypeSettings
- type ApprovalResult
- type Artifact
- type ArtifactDetails
- type ArtifactLocation
- type ArtifactStore
- type BlockerDeclaration
- type CodePipeline
- func (c *CodePipeline) AcknowledgeJob(input *AcknowledgeJobInput) (*AcknowledgeJobOutput, error)
- func (c *CodePipeline) AcknowledgeJobRequest(input *AcknowledgeJobInput) (req *request.Request, output *AcknowledgeJobOutput)
- func (c *CodePipeline) AcknowledgeThirdPartyJob(input *AcknowledgeThirdPartyJobInput) (*AcknowledgeThirdPartyJobOutput, error)
- func (c *CodePipeline) AcknowledgeThirdPartyJobRequest(input *AcknowledgeThirdPartyJobInput) (req *request.Request, output *AcknowledgeThirdPartyJobOutput)
- func (c *CodePipeline) CreateCustomActionType(input *CreateCustomActionTypeInput) (*CreateCustomActionTypeOutput, error)
- func (c *CodePipeline) CreateCustomActionTypeRequest(input *CreateCustomActionTypeInput) (req *request.Request, output *CreateCustomActionTypeOutput)
- func (c *CodePipeline) CreatePipeline(input *CreatePipelineInput) (*CreatePipelineOutput, error)
- func (c *CodePipeline) CreatePipelineRequest(input *CreatePipelineInput) (req *request.Request, output *CreatePipelineOutput)
- func (c *CodePipeline) DeleteCustomActionType(input *DeleteCustomActionTypeInput) (*DeleteCustomActionTypeOutput, error)
- func (c *CodePipeline) DeleteCustomActionTypeRequest(input *DeleteCustomActionTypeInput) (req *request.Request, output *DeleteCustomActionTypeOutput)
- func (c *CodePipeline) DeletePipeline(input *DeletePipelineInput) (*DeletePipelineOutput, error)
- func (c *CodePipeline) DeletePipelineRequest(input *DeletePipelineInput) (req *request.Request, output *DeletePipelineOutput)
- func (c *CodePipeline) DisableStageTransition(input *DisableStageTransitionInput) (*DisableStageTransitionOutput, error)
- func (c *CodePipeline) DisableStageTransitionRequest(input *DisableStageTransitionInput) (req *request.Request, output *DisableStageTransitionOutput)
- func (c *CodePipeline) EnableStageTransition(input *EnableStageTransitionInput) (*EnableStageTransitionOutput, error)
- func (c *CodePipeline) EnableStageTransitionRequest(input *EnableStageTransitionInput) (req *request.Request, output *EnableStageTransitionOutput)
- func (c *CodePipeline) GetJobDetails(input *GetJobDetailsInput) (*GetJobDetailsOutput, error)
- func (c *CodePipeline) GetJobDetailsRequest(input *GetJobDetailsInput) (req *request.Request, output *GetJobDetailsOutput)
- func (c *CodePipeline) GetPipeline(input *GetPipelineInput) (*GetPipelineOutput, error)
- func (c *CodePipeline) GetPipelineRequest(input *GetPipelineInput) (req *request.Request, output *GetPipelineOutput)
- func (c *CodePipeline) GetPipelineState(input *GetPipelineStateInput) (*GetPipelineStateOutput, error)
- func (c *CodePipeline) GetPipelineStateRequest(input *GetPipelineStateInput) (req *request.Request, output *GetPipelineStateOutput)
- func (c *CodePipeline) GetThirdPartyJobDetails(input *GetThirdPartyJobDetailsInput) (*GetThirdPartyJobDetailsOutput, error)
- func (c *CodePipeline) GetThirdPartyJobDetailsRequest(input *GetThirdPartyJobDetailsInput) (req *request.Request, output *GetThirdPartyJobDetailsOutput)
- func (c *CodePipeline) ListActionTypes(input *ListActionTypesInput) (*ListActionTypesOutput, error)
- func (c *CodePipeline) ListActionTypesRequest(input *ListActionTypesInput) (req *request.Request, output *ListActionTypesOutput)
- func (c *CodePipeline) ListPipelines(input *ListPipelinesInput) (*ListPipelinesOutput, error)
- func (c *CodePipeline) ListPipelinesRequest(input *ListPipelinesInput) (req *request.Request, output *ListPipelinesOutput)
- func (c *CodePipeline) PollForJobs(input *PollForJobsInput) (*PollForJobsOutput, error)
- func (c *CodePipeline) PollForJobsRequest(input *PollForJobsInput) (req *request.Request, output *PollForJobsOutput)
- func (c *CodePipeline) PollForThirdPartyJobs(input *PollForThirdPartyJobsInput) (*PollForThirdPartyJobsOutput, error)
- func (c *CodePipeline) PollForThirdPartyJobsRequest(input *PollForThirdPartyJobsInput) (req *request.Request, output *PollForThirdPartyJobsOutput)
- func (c *CodePipeline) PutActionRevision(input *PutActionRevisionInput) (*PutActionRevisionOutput, error)
- func (c *CodePipeline) PutActionRevisionRequest(input *PutActionRevisionInput) (req *request.Request, output *PutActionRevisionOutput)
- func (c *CodePipeline) PutApprovalResult(input *PutApprovalResultInput) (*PutApprovalResultOutput, error)
- func (c *CodePipeline) PutApprovalResultRequest(input *PutApprovalResultInput) (req *request.Request, output *PutApprovalResultOutput)
- func (c *CodePipeline) PutJobFailureResult(input *PutJobFailureResultInput) (*PutJobFailureResultOutput, error)
- func (c *CodePipeline) PutJobFailureResultRequest(input *PutJobFailureResultInput) (req *request.Request, output *PutJobFailureResultOutput)
- func (c *CodePipeline) PutJobSuccessResult(input *PutJobSuccessResultInput) (*PutJobSuccessResultOutput, error)
- func (c *CodePipeline) PutJobSuccessResultRequest(input *PutJobSuccessResultInput) (req *request.Request, output *PutJobSuccessResultOutput)
- func (c *CodePipeline) PutThirdPartyJobFailureResult(input *PutThirdPartyJobFailureResultInput) (*PutThirdPartyJobFailureResultOutput, error)
- func (c *CodePipeline) PutThirdPartyJobFailureResultRequest(input *PutThirdPartyJobFailureResultInput) (req *request.Request, output *PutThirdPartyJobFailureResultOutput)
- func (c *CodePipeline) PutThirdPartyJobSuccessResult(input *PutThirdPartyJobSuccessResultInput) (*PutThirdPartyJobSuccessResultOutput, error)
- func (c *CodePipeline) PutThirdPartyJobSuccessResultRequest(input *PutThirdPartyJobSuccessResultInput) (req *request.Request, output *PutThirdPartyJobSuccessResultOutput)
- func (c *CodePipeline) RetryStageExecution(input *RetryStageExecutionInput) (*RetryStageExecutionOutput, error)
- func (c *CodePipeline) RetryStageExecutionRequest(input *RetryStageExecutionInput) (req *request.Request, output *RetryStageExecutionOutput)
- func (c *CodePipeline) StartPipelineExecution(input *StartPipelineExecutionInput) (*StartPipelineExecutionOutput, error)
- func (c *CodePipeline) StartPipelineExecutionRequest(input *StartPipelineExecutionInput) (req *request.Request, output *StartPipelineExecutionOutput)
- func (c *CodePipeline) UpdatePipeline(input *UpdatePipelineInput) (*UpdatePipelineOutput, error)
- func (c *CodePipeline) UpdatePipelineRequest(input *UpdatePipelineInput) (req *request.Request, output *UpdatePipelineOutput)
- type CreateCustomActionTypeInput
- type CreateCustomActionTypeOutput
- type CreatePipelineInput
- type CreatePipelineOutput
- type CurrentRevision
- type DeleteCustomActionTypeInput
- type DeleteCustomActionTypeOutput
- type DeletePipelineInput
- type DeletePipelineOutput
- type DisableStageTransitionInput
- type DisableStageTransitionOutput
- type EnableStageTransitionInput
- type EnableStageTransitionOutput
- type EncryptionKey
- type ErrorDetails
- type ExecutionDetails
- type FailureDetails
- type GetJobDetailsInput
- type GetJobDetailsOutput
- type GetPipelineInput
- type GetPipelineOutput
- type GetPipelineStateInput
- type GetPipelineStateOutput
- type GetThirdPartyJobDetailsInput
- type GetThirdPartyJobDetailsOutput
- type InputArtifact
- type Job
- type JobData
- type JobDetails
- type ListActionTypesInput
- type ListActionTypesOutput
- type ListPipelinesInput
- type ListPipelinesOutput
- type OutputArtifact
- type PipelineContext
- type PipelineDeclaration
- type PipelineSummary
- type PollForJobsInput
- type PollForJobsOutput
- type PollForThirdPartyJobsInput
- type PollForThirdPartyJobsOutput
- type PutActionRevisionInput
- type PutActionRevisionOutput
- type PutApprovalResultInput
- type PutApprovalResultOutput
- type PutJobFailureResultInput
- type PutJobFailureResultOutput
- type PutJobSuccessResultInput
- type PutJobSuccessResultOutput
- type PutThirdPartyJobFailureResultInput
- type PutThirdPartyJobFailureResultOutput
- type PutThirdPartyJobSuccessResultInput
- type PutThirdPartyJobSuccessResultOutput
- type RetryStageExecutionInput
- type RetryStageExecutionOutput
- type S3ArtifactLocation
- type StageContext
- type StageDeclaration
- type StageExecution
- type StageState
- type StartPipelineExecutionInput
- type StartPipelineExecutionOutput
- type ThirdPartyJob
- type ThirdPartyJobData
- type ThirdPartyJobDetails
- type TransitionState
- type UpdatePipelineInput
- type UpdatePipelineOutput
Examples ¶
- CodePipeline.AcknowledgeJob
- CodePipeline.AcknowledgeThirdPartyJob
- CodePipeline.CreateCustomActionType
- CodePipeline.CreatePipeline
- CodePipeline.DeleteCustomActionType
- CodePipeline.DeletePipeline
- CodePipeline.DisableStageTransition
- CodePipeline.EnableStageTransition
- CodePipeline.GetJobDetails
- CodePipeline.GetPipeline
- CodePipeline.GetPipelineState
- CodePipeline.GetThirdPartyJobDetails
- CodePipeline.ListActionTypes
- CodePipeline.ListPipelines
- CodePipeline.PollForJobs
- CodePipeline.PollForThirdPartyJobs
- CodePipeline.PutActionRevision
- CodePipeline.PutApprovalResult
- CodePipeline.PutJobFailureResult
- CodePipeline.PutJobSuccessResult
- CodePipeline.PutThirdPartyJobFailureResult
- CodePipeline.PutThirdPartyJobSuccessResult
- CodePipeline.RetryStageExecution
- CodePipeline.StartPipelineExecution
- CodePipeline.UpdatePipeline
Constants ¶
const ( // @enum ActionCategory ActionCategorySource = "Source" // @enum ActionCategory ActionCategoryBuild = "Build" // @enum ActionCategory ActionCategoryDeploy = "Deploy" // @enum ActionCategory ActionCategoryTest = "Test" // @enum ActionCategory ActionCategoryInvoke = "Invoke" // @enum ActionCategory ActionCategoryApproval = "Approval" )
const ( // @enum ActionConfigurationPropertyType ActionConfigurationPropertyTypeString = "String" // @enum ActionConfigurationPropertyType ActionConfigurationPropertyTypeNumber = "Number" // @enum ActionConfigurationPropertyType ActionConfigurationPropertyTypeBoolean = "Boolean" )
const ( // @enum ActionExecutionStatus ActionExecutionStatusInProgress = "InProgress" // @enum ActionExecutionStatus ActionExecutionStatusSucceeded = "Succeeded" // @enum ActionExecutionStatus ActionExecutionStatusFailed = "Failed" )
const ( // @enum ActionOwner ActionOwnerAws = "AWS" // @enum ActionOwner ActionOwnerThirdParty = "ThirdParty" // @enum ActionOwner ActionOwnerCustom = "Custom" )
const ( // @enum ApprovalStatus ApprovalStatusApproved = "Approved" // @enum ApprovalStatus ApprovalStatusRejected = "Rejected" )
const ( // @enum FailureType FailureTypeJobFailed = "JobFailed" // @enum FailureType FailureTypeConfigurationError = "ConfigurationError" // @enum FailureType FailureTypePermissionError = "PermissionError" // @enum FailureType FailureTypeRevisionOutOfSync = "RevisionOutOfSync" FailureTypeRevisionUnavailable = "RevisionUnavailable" FailureTypeSystemUnavailable = "SystemUnavailable" )
const ( // @enum JobStatus JobStatusCreated = "Created" // @enum JobStatus JobStatusQueued = "Queued" // @enum JobStatus JobStatusDispatched = "Dispatched" // @enum JobStatus JobStatusInProgress = "InProgress" // @enum JobStatus JobStatusTimedOut = "TimedOut" // @enum JobStatus JobStatusSucceeded = "Succeeded" // @enum JobStatus JobStatusFailed = "Failed" )
const ( // @enum StageExecutionStatus StageExecutionStatusInProgress = "InProgress" // @enum StageExecutionStatus StageExecutionStatusFailed = "Failed" // @enum StageExecutionStatus StageExecutionStatusSucceeded = "Succeeded" )
const ( // @enum StageTransitionType StageTransitionTypeInbound = "Inbound" // @enum StageTransitionType StageTransitionTypeOutbound = "Outbound" )
const (
// @enum ArtifactLocationType
ArtifactLocationTypeS3 = "S3"
)
const (
// @enum ArtifactStoreType
ArtifactStoreTypeS3 = "S3"
)
const (
// @enum BlockerType
BlockerTypeSchedule = "Schedule"
)
const (
// @enum EncryptionKeyType
EncryptionKeyTypeKms = "KMS"
)
const ServiceName = "codepipeline"
A ServiceName is the name of the service the client will make API calls to.
const (
// @enum StageRetryMode
StageRetryModeFailedActions = "FAILED_ACTIONS"
)
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type AWSSessionCredentials ¶
type AWSSessionCredentials struct { // The access key for the session. AccessKeyId *string `locationName:"accessKeyId" type:"string" required:"true"` // The secret access key for the session. SecretAccessKey *string `locationName:"secretAccessKey" type:"string" required:"true"` // The token for the session. SessionToken *string `locationName:"sessionToken" type:"string" required:"true"` // contains filtered or unexported fields }
Represents an AWS session credentials object. These credentials are temporary credentials that are issued by AWS Secure Token Service (STS). They can be used to access input and output artifacts in the Amazon S3 bucket used to store artifact for the pipeline in AWS CodePipeline.
func (AWSSessionCredentials) GoString ¶
func (s AWSSessionCredentials) GoString() string
GoString returns the string representation
func (AWSSessionCredentials) String ¶
func (s AWSSessionCredentials) String() string
String returns the string representation
type AcknowledgeJobInput ¶
type AcknowledgeJobInput struct { // The unique system-generated ID of the job for which you want to confirm receipt. JobId *string `locationName:"jobId" type:"string" required:"true"` // A system-generated random number that AWS CodePipeline uses to ensure that // the job is being worked on by only one job worker. This number must be returned // in the response. Nonce *string `locationName:"nonce" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of an acknowledge job action.
func (AcknowledgeJobInput) GoString ¶
func (s AcknowledgeJobInput) GoString() string
GoString returns the string representation
func (AcknowledgeJobInput) String ¶
func (s AcknowledgeJobInput) String() string
String returns the string representation
func (*AcknowledgeJobInput) Validate ¶ added in v1.1.21
func (s *AcknowledgeJobInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AcknowledgeJobOutput ¶
type AcknowledgeJobOutput struct { // Whether the job worker has received the specified job. Status *string `locationName:"status" type:"string" enum:"JobStatus"` // contains filtered or unexported fields }
Represents the output of an acknowledge job action.
func (AcknowledgeJobOutput) GoString ¶
func (s AcknowledgeJobOutput) GoString() string
GoString returns the string representation
func (AcknowledgeJobOutput) String ¶
func (s AcknowledgeJobOutput) String() string
String returns the string representation
type AcknowledgeThirdPartyJobInput ¶
type AcknowledgeThirdPartyJobInput struct { // The clientToken portion of the clientId and clientToken pair used to verify // that the calling entity is allowed access to the job and its details. ClientToken *string `locationName:"clientToken" type:"string" required:"true"` // The unique system-generated ID of the job. JobId *string `locationName:"jobId" min:"1" type:"string" required:"true"` // A system-generated random number that AWS CodePipeline uses to ensure that // the job is being worked on by only one job worker. This number must be returned // in the response. Nonce *string `locationName:"nonce" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of an acknowledge third party job action.
func (AcknowledgeThirdPartyJobInput) GoString ¶
func (s AcknowledgeThirdPartyJobInput) GoString() string
GoString returns the string representation
func (AcknowledgeThirdPartyJobInput) String ¶
func (s AcknowledgeThirdPartyJobInput) String() string
String returns the string representation
func (*AcknowledgeThirdPartyJobInput) Validate ¶ added in v1.1.21
func (s *AcknowledgeThirdPartyJobInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AcknowledgeThirdPartyJobOutput ¶
type AcknowledgeThirdPartyJobOutput struct { // The status information for the third party job, if any. Status *string `locationName:"status" type:"string" enum:"JobStatus"` // contains filtered or unexported fields }
Represents the output of an acknowledge third party job action.
func (AcknowledgeThirdPartyJobOutput) GoString ¶
func (s AcknowledgeThirdPartyJobOutput) GoString() string
GoString returns the string representation
func (AcknowledgeThirdPartyJobOutput) String ¶
func (s AcknowledgeThirdPartyJobOutput) String() string
String returns the string representation
type ActionConfiguration ¶
type ActionConfiguration struct { // The configuration data for the action. Configuration map[string]*string `locationName:"configuration" type:"map"` // contains filtered or unexported fields }
Represents information about an action configuration.
func (ActionConfiguration) GoString ¶
func (s ActionConfiguration) GoString() string
GoString returns the string representation
func (ActionConfiguration) String ¶
func (s ActionConfiguration) String() string
String returns the string representation
type ActionConfigurationProperty ¶
type ActionConfigurationProperty struct { // The description of the action configuration property that will be displayed // to users. Description *string `locationName:"description" min:"1" type:"string"` // Whether the configuration property is a key. Key *bool `locationName:"key" type:"boolean" required:"true"` // The name of the action configuration property. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // Indicates that the proprety will be used in conjunction with PollForJobs. // When creating a custom action, an action can have up to one queryable property. // If it has one, that property must be both required and not secret. // // If you create a pipeline with a custom action type, and that custom action // contains a queryable property, the value for that configuration property // is subject to additional restrictions. The value must be less than or equal // to twenty (20) characters. The value can contain only alphanumeric characters, // underscores, and hyphens. Queryable *bool `locationName:"queryable" type:"boolean"` // Whether the configuration property is a required value. Required *bool `locationName:"required" type:"boolean" required:"true"` // Whether the configuration property is secret. Secrets are hidden from all // calls except for GetJobDetails, GetThirdPartyJobDetails, PollForJobs, and // PollForThirdPartyJobs. // // When updating a pipeline, passing * * * * * without changing any other values // of the action will preserve the prior value of the secret. Secret *bool `locationName:"secret" type:"boolean" required:"true"` // The type of the configuration property. Type *string `locationName:"type" type:"string" enum:"ActionConfigurationPropertyType"` // contains filtered or unexported fields }
Represents information about an action configuration property.
func (ActionConfigurationProperty) GoString ¶
func (s ActionConfigurationProperty) GoString() string
GoString returns the string representation
func (ActionConfigurationProperty) String ¶
func (s ActionConfigurationProperty) String() string
String returns the string representation
func (*ActionConfigurationProperty) Validate ¶ added in v1.1.21
func (s *ActionConfigurationProperty) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ActionContext ¶
type ActionContext struct { // The name of the action within the context of a job. Name *string `locationName:"name" min:"1" type:"string"` // contains filtered or unexported fields }
Represents the context of an action within the stage of a pipeline to a job worker.
func (ActionContext) GoString ¶
func (s ActionContext) GoString() string
GoString returns the string representation
func (ActionContext) String ¶
func (s ActionContext) String() string
String returns the string representation
type ActionDeclaration ¶
type ActionDeclaration struct { // The configuration information for the action type. ActionTypeId *ActionTypeId `locationName:"actionTypeId" type:"structure" required:"true"` // The action declaration's configuration. Configuration map[string]*string `locationName:"configuration" type:"map"` // The name or ID of the artifact consumed by the action, such as a test or // build artifact. InputArtifacts []*InputArtifact `locationName:"inputArtifacts" type:"list"` // The action declaration's name. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // The name or ID of the result of the action declaration, such as a test or // build artifact. OutputArtifacts []*OutputArtifact `locationName:"outputArtifacts" type:"list"` // The ARN of the IAM service role that will perform the declared action. This // is assumed through the roleArn for the pipeline. RoleArn *string `locationName:"roleArn" type:"string"` // The order in which actions are run. RunOrder *int64 `locationName:"runOrder" min:"1" type:"integer"` // contains filtered or unexported fields }
Represents information about an action declaration.
func (ActionDeclaration) GoString ¶
func (s ActionDeclaration) GoString() string
GoString returns the string representation
func (ActionDeclaration) String ¶
func (s ActionDeclaration) String() string
String returns the string representation
func (*ActionDeclaration) Validate ¶ added in v1.1.21
func (s *ActionDeclaration) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ActionExecution ¶
type ActionExecution struct { // The details of an error returned by a URL external to AWS. ErrorDetails *ErrorDetails `locationName:"errorDetails" type:"structure"` // The external ID of the run of the action. ExternalExecutionId *string `locationName:"externalExecutionId" min:"1" type:"string"` // The URL of a resource external to AWS that will be used when running the // action, for example an external repository URL. ExternalExecutionUrl *string `locationName:"externalExecutionUrl" min:"1" type:"string"` // The last status change of the action. LastStatusChange *time.Time `locationName:"lastStatusChange" type:"timestamp" timestampFormat:"unix"` // The ARN of the user who last changed the pipeline. LastUpdatedBy *string `locationName:"lastUpdatedBy" type:"string"` // A percentage of completeness of the action as it runs. PercentComplete *int64 `locationName:"percentComplete" type:"integer"` // The status of the action, or for a completed action, the last status of the // action. Status *string `locationName:"status" type:"string" enum:"ActionExecutionStatus"` // A summary of the run of the action. Summary *string `locationName:"summary" type:"string"` // The system-generated token used to identify a unique approval request. The // token for each open approval request can be obtained using the GetPipelineState // command and is used to validate that the approval request corresponding to // this token is still valid. Token *string `locationName:"token" type:"string"` // contains filtered or unexported fields }
Represents information about the run of an action.
func (ActionExecution) GoString ¶
func (s ActionExecution) GoString() string
GoString returns the string representation
func (ActionExecution) String ¶
func (s ActionExecution) String() string
String returns the string representation
type ActionRevision ¶
type ActionRevision struct { // The date and time when the most recent version of the action was created, // in timestamp format. Created *time.Time `locationName:"created" type:"timestamp" timestampFormat:"unix" required:"true"` // The unique identifier of the change that set the state to this revision, // for example a deployment ID or timestamp. RevisionChangeId *string `locationName:"revisionChangeId" min:"1" type:"string" required:"true"` // The system-generated unique ID that identifies the revision number of the // action. RevisionId *string `locationName:"revisionId" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about the version (or revision) of an action.
func (ActionRevision) GoString ¶
func (s ActionRevision) GoString() string
GoString returns the string representation
func (ActionRevision) String ¶
func (s ActionRevision) String() string
String returns the string representation
func (*ActionRevision) Validate ¶ added in v1.1.21
func (s *ActionRevision) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ActionState ¶
type ActionState struct { // The name of the action. ActionName *string `locationName:"actionName" min:"1" type:"string"` // Represents information about the version (or revision) of an action. CurrentRevision *ActionRevision `locationName:"currentRevision" type:"structure"` // A URL link for more information about the state of the action, such as a // deployment group details page. EntityUrl *string `locationName:"entityUrl" min:"1" type:"string"` // Represents information about the run of an action. LatestExecution *ActionExecution `locationName:"latestExecution" type:"structure"` // A URL link for more information about the revision, such as a commit details // page. RevisionUrl *string `locationName:"revisionUrl" min:"1" type:"string"` // contains filtered or unexported fields }
Represents information about the state of an action.
func (ActionState) GoString ¶
func (s ActionState) GoString() string
GoString returns the string representation
func (ActionState) String ¶
func (s ActionState) String() string
String returns the string representation
type ActionType ¶
type ActionType struct { // The configuration properties for the action type. ActionConfigurationProperties []*ActionConfigurationProperty `locationName:"actionConfigurationProperties" type:"list"` // Represents information about an action type. Id *ActionTypeId `locationName:"id" type:"structure" required:"true"` // The details of the input artifact for the action, such as its commit ID. InputArtifactDetails *ArtifactDetails `locationName:"inputArtifactDetails" type:"structure" required:"true"` // The details of the output artifact of the action, such as its commit ID. OutputArtifactDetails *ArtifactDetails `locationName:"outputArtifactDetails" type:"structure" required:"true"` // The settings for the action type. Settings *ActionTypeSettings `locationName:"settings" type:"structure"` // contains filtered or unexported fields }
Returns information about the details of an action type.
func (ActionType) GoString ¶
func (s ActionType) GoString() string
GoString returns the string representation
func (ActionType) String ¶
func (s ActionType) String() string
String returns the string representation
type ActionTypeId ¶ added in v0.9.5
type ActionTypeId struct { // A category defines what kind of action can be taken in the stage, and constrains // the provider type for the action. Valid categories are limited to one of // the values below. Category *string `locationName:"category" type:"string" required:"true" enum:"ActionCategory"` // The creator of the action being called. Owner *string `locationName:"owner" type:"string" required:"true" enum:"ActionOwner"` // The provider of the service being called by the action. Valid providers are // determined by the action category. For example, an action in the Deploy category // type might have a provider of AWS CodeDeploy, which would be specified as // CodeDeploy. Provider *string `locationName:"provider" min:"1" type:"string" required:"true"` // A string that identifies the action type. Version *string `locationName:"version" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about an action type.
func (ActionTypeId) GoString ¶ added in v0.9.5
func (s ActionTypeId) GoString() string
GoString returns the string representation
func (ActionTypeId) String ¶ added in v0.9.5
func (s ActionTypeId) String() string
String returns the string representation
func (*ActionTypeId) Validate ¶ added in v1.1.21
func (s *ActionTypeId) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ActionTypeSettings ¶
type ActionTypeSettings struct { // The URL returned to the AWS CodePipeline console that provides a deep link // to the resources of the external system, such as the configuration page for // an AWS CodeDeploy deployment group. This link is provided as part of the // action display within the pipeline. EntityUrlTemplate *string `locationName:"entityUrlTemplate" min:"1" type:"string"` // The URL returned to the AWS CodePipeline console that contains a link to // the top-level landing page for the external system, such as console page // for AWS CodeDeploy. This link is shown on the pipeline view page in the AWS // CodePipeline console and provides a link to the execution entity of the external // action. ExecutionUrlTemplate *string `locationName:"executionUrlTemplate" min:"1" type:"string"` // The URL returned to the AWS CodePipeline console that contains a link to // the page where customers can update or change the configuration of the external // action. RevisionUrlTemplate *string `locationName:"revisionUrlTemplate" min:"1" type:"string"` // The URL of a sign-up page where users can sign up for an external service // and perform initial configuration of the action provided by that service. ThirdPartyConfigurationUrl *string `locationName:"thirdPartyConfigurationUrl" min:"1" type:"string"` // contains filtered or unexported fields }
Returns information about the settings for an action type.
func (ActionTypeSettings) GoString ¶
func (s ActionTypeSettings) GoString() string
GoString returns the string representation
func (ActionTypeSettings) String ¶
func (s ActionTypeSettings) String() string
String returns the string representation
func (*ActionTypeSettings) Validate ¶ added in v1.1.21
func (s *ActionTypeSettings) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ApprovalResult ¶ added in v1.2.3
type ApprovalResult struct { // The response submitted by a reviewer assigned to an approval action request. Status *string `locationName:"status" type:"string" required:"true" enum:"ApprovalStatus"` // The summary of the current status of the approval request. Summary *string `locationName:"summary" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about the result of an approval request.
func (ApprovalResult) GoString ¶ added in v1.2.3
func (s ApprovalResult) GoString() string
GoString returns the string representation
func (ApprovalResult) String ¶ added in v1.2.3
func (s ApprovalResult) String() string
String returns the string representation
func (*ApprovalResult) Validate ¶ added in v1.2.3
func (s *ApprovalResult) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type Artifact ¶
type Artifact struct { // The location of an artifact. Location *ArtifactLocation `locationName:"location" type:"structure"` // The artifact's name. Name *string `locationName:"name" min:"1" type:"string"` // The artifact's revision ID. Depending on the type of object, this could be // a commit ID (GitHub) or a revision ID (Amazon S3). Revision *string `locationName:"revision" min:"1" type:"string"` // contains filtered or unexported fields }
Represents information about an artifact that will be worked upon by actions in the pipeline.
type ArtifactDetails ¶
type ArtifactDetails struct { // The maximum number of artifacts allowed for the action type. MaximumCount *int64 `locationName:"maximumCount" type:"integer" required:"true"` // The minimum number of artifacts allowed for the action type. MinimumCount *int64 `locationName:"minimumCount" type:"integer" required:"true"` // contains filtered or unexported fields }
Returns information about the details of an artifact.
func (ArtifactDetails) GoString ¶
func (s ArtifactDetails) GoString() string
GoString returns the string representation
func (ArtifactDetails) String ¶
func (s ArtifactDetails) String() string
String returns the string representation
func (*ArtifactDetails) Validate ¶ added in v1.1.21
func (s *ArtifactDetails) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ArtifactLocation ¶
type ArtifactLocation struct { // The Amazon S3 bucket that contains the artifact. S3Location *S3ArtifactLocation `locationName:"s3Location" type:"structure"` // The type of artifact in the location. Type *string `locationName:"type" type:"string" enum:"ArtifactLocationType"` // contains filtered or unexported fields }
Represents information about the location of an artifact.
func (ArtifactLocation) GoString ¶
func (s ArtifactLocation) GoString() string
GoString returns the string representation
func (ArtifactLocation) String ¶
func (s ArtifactLocation) String() string
String returns the string representation
type ArtifactStore ¶
type ArtifactStore struct { // The encryption key used to encrypt the data in the artifact store, such as // an AWS Key Management Service (AWS KMS) key. If this is undefined, the default // key for Amazon S3 is used. EncryptionKey *EncryptionKey `locationName:"encryptionKey" type:"structure"` // The location for storing the artifacts for a pipeline, such as an S3 bucket // or folder. Location *string `locationName:"location" min:"3" type:"string" required:"true"` // The type of the artifact store, such as S3. Type *string `locationName:"type" type:"string" required:"true" enum:"ArtifactStoreType"` // contains filtered or unexported fields }
The Amazon S3 location where artifacts are stored for the pipeline. If this Amazon S3 bucket is created manually, it must meet the requirements for AWS CodePipeline. For more information, see the Concepts (http://docs.aws.amazon.com/codepipeline/latest/userguide/concepts.html#CPS3Bucket).
func (ArtifactStore) GoString ¶
func (s ArtifactStore) GoString() string
GoString returns the string representation
func (ArtifactStore) String ¶
func (s ArtifactStore) String() string
String returns the string representation
func (*ArtifactStore) Validate ¶ added in v1.1.21
func (s *ArtifactStore) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type BlockerDeclaration ¶
type BlockerDeclaration struct { // Reserved for future use. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // Reserved for future use. Type *string `locationName:"type" type:"string" required:"true" enum:"BlockerType"` // contains filtered or unexported fields }
Reserved for future use.
func (BlockerDeclaration) GoString ¶
func (s BlockerDeclaration) GoString() string
GoString returns the string representation
func (BlockerDeclaration) String ¶
func (s BlockerDeclaration) String() string
String returns the string representation
func (*BlockerDeclaration) Validate ¶ added in v1.1.21
func (s *BlockerDeclaration) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CodePipeline ¶
Overview
This is the AWS CodePipeline API Reference. This guide provides descriptions of the actions and data types for AWS CodePipeline. Some functionality for your pipeline is only configurable through the API. For additional information, see the AWS CodePipeline User Guide (http://docs.aws.amazon.com/codepipeline/latest/userguide/welcome.html).
You can use the AWS CodePipeline API to work with pipelines, stages, actions, gates, and transitions, as described below.
Pipelines are models of automated release processes. Each pipeline is uniquely
named, and consists of actions, gates, and stages.
You can work with pipelines by calling:
CreatePipeline, which creates a uniquely-named pipeline. DeletePipeline, which deletes the specified pipeline. GetPipeline, which returns information about a pipeline structure. GetPipelineState, which returns information about the current state of
the stages and actions of a pipeline.
ListPipelines, which gets a summary of all of the pipelines associated
with your account.
StartPipelineExecution, which runs the the most recent revision of an
artifact through the pipeline.
UpdatePipeline, which updates a pipeline with edits or changes to the
structure of the pipeline.
Pipelines include stages, which are which are logical groupings of gates
and actions. Each stage contains one or more actions that must complete before the next stage begins. A stage will result in success or failure. If a stage fails, then the pipeline stops at that stage and will remain stopped until either a new version of an artifact appears in the source location, or a user takes action to re-run the most recent artifact through the pipeline. You can call GetPipelineState, which displays the status of a pipeline, including the status of stages in the pipeline, or GetPipeline, which returns the entire structure of the pipeline, including the stages of that pipeline. For more information about the structure of stages and actions, also refer to the AWS CodePipeline Pipeline Structure Reference (http://docs.aws.amazon.com/codepipeline/latest/userguide/pipeline-structure.html).
Pipeline stages include actions, which are categorized into categories such as source or build actions performed within a stage of a pipeline. For example, you can use a source action to import artifacts into a pipeline from a source such as Amazon S3. Like stages, you do not work with actions directly in most cases, but you do define and interact with actions when working with pipeline operations such as CreatePipeline and GetPipelineState.
Pipelines also include transitions, which allow the transition of artifacts from one stage to the next in a pipeline after the actions in one stage complete.
You can work with transitions by calling:
DisableStageTransition, which prevents artifacts from transitioning to
the next stage in a pipeline.
EnableStageTransition, which enables transition of artifacts between
stages in a pipeline.
Using the API to integrate with AWS CodePipeline
For third-party integrators or developers who want to create their own integrations with AWS CodePipeline, the expected sequence varies from the standard API user. In order to integrate with AWS CodePipeline, developers will need to work with the following items:
Jobs, which are instances of an action. For example, a job for a source
action might import a revision of an artifact from a source.
You can work with jobs by calling:
AcknowledgeJob, which confirms whether a job worker has received the
specified job,
GetJobDetails, which returns the details of a job, PollForJobs, which determines whether there are any jobs to act upon, PutJobFailureResult, which provides details of a job failure, and PutJobSuccessResult, which provides details of a job success. Third party jobs, which are instances of an action created by a partner
action and integrated into AWS CodePipeline. Partner actions are created by members of the AWS Partner Network.
You can work with third party jobs by calling:
AcknowledgeThirdPartyJob, which confirms whether a job worker has received
the specified job,
GetThirdPartyJobDetails, which requests the details of a job for a partner
action,
PollForThirdPartyJobs, which determines whether there are any jobs to
act upon,
PutThirdPartyJobFailureResult, which provides details of a job failure,
and
PutThirdPartyJobSuccessResult, which provides details of a job success.
The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.
func New ¶
func New(p client.ConfigProvider, cfgs ...*aws.Config) *CodePipeline
New creates a new instance of the CodePipeline client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.
Example:
// Create a CodePipeline client from just a session. svc := codepipeline.New(mySession) // Create a CodePipeline client with additional configuration svc := codepipeline.New(mySession, aws.NewConfig().WithRegion("us-west-2"))
func (*CodePipeline) AcknowledgeJob ¶
func (c *CodePipeline) AcknowledgeJob(input *AcknowledgeJobInput) (*AcknowledgeJobOutput, error)
Returns information about a specified job and whether that job has been received by the job worker. Only used for custom actions.
func (*CodePipeline) AcknowledgeJobRequest ¶
func (c *CodePipeline) AcknowledgeJobRequest(input *AcknowledgeJobInput) (req *request.Request, output *AcknowledgeJobOutput)
AcknowledgeJobRequest generates a "aws/request.Request" representing the client's request for the AcknowledgeJob operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AcknowledgeJob method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AcknowledgeJobRequest method. req, resp := client.AcknowledgeJobRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) AcknowledgeThirdPartyJob ¶
func (c *CodePipeline) AcknowledgeThirdPartyJob(input *AcknowledgeThirdPartyJobInput) (*AcknowledgeThirdPartyJobOutput, error)
Confirms a job worker has received the specified job. Only used for partner actions.
func (*CodePipeline) AcknowledgeThirdPartyJobRequest ¶
func (c *CodePipeline) AcknowledgeThirdPartyJobRequest(input *AcknowledgeThirdPartyJobInput) (req *request.Request, output *AcknowledgeThirdPartyJobOutput)
AcknowledgeThirdPartyJobRequest generates a "aws/request.Request" representing the client's request for the AcknowledgeThirdPartyJob operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AcknowledgeThirdPartyJob method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AcknowledgeThirdPartyJobRequest method. req, resp := client.AcknowledgeThirdPartyJobRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) CreateCustomActionType ¶
func (c *CodePipeline) CreateCustomActionType(input *CreateCustomActionTypeInput) (*CreateCustomActionTypeOutput, error)
Creates a new custom action that can be used in all pipelines associated with the AWS account. Only used for custom actions.
func (*CodePipeline) CreateCustomActionTypeRequest ¶
func (c *CodePipeline) CreateCustomActionTypeRequest(input *CreateCustomActionTypeInput) (req *request.Request, output *CreateCustomActionTypeOutput)
CreateCustomActionTypeRequest generates a "aws/request.Request" representing the client's request for the CreateCustomActionType operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCustomActionType method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateCustomActionTypeRequest method. req, resp := client.CreateCustomActionTypeRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) CreatePipeline ¶
func (c *CodePipeline) CreatePipeline(input *CreatePipelineInput) (*CreatePipelineOutput, error)
Creates a pipeline.
func (*CodePipeline) CreatePipelineRequest ¶
func (c *CodePipeline) CreatePipelineRequest(input *CreatePipelineInput) (req *request.Request, output *CreatePipelineOutput)
CreatePipelineRequest generates a "aws/request.Request" representing the client's request for the CreatePipeline operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreatePipeline method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreatePipelineRequest method. req, resp := client.CreatePipelineRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) DeleteCustomActionType ¶
func (c *CodePipeline) DeleteCustomActionType(input *DeleteCustomActionTypeInput) (*DeleteCustomActionTypeOutput, error)
Marks a custom action as deleted. PollForJobs for the custom action will fail after the action is marked for deletion. Only used for custom actions.
You cannot recreate a custom action after it has been deleted unless you
increase the version number of the action.
func (*CodePipeline) DeleteCustomActionTypeRequest ¶
func (c *CodePipeline) DeleteCustomActionTypeRequest(input *DeleteCustomActionTypeInput) (req *request.Request, output *DeleteCustomActionTypeOutput)
DeleteCustomActionTypeRequest generates a "aws/request.Request" representing the client's request for the DeleteCustomActionType operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteCustomActionType method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteCustomActionTypeRequest method. req, resp := client.DeleteCustomActionTypeRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) DeletePipeline ¶
func (c *CodePipeline) DeletePipeline(input *DeletePipelineInput) (*DeletePipelineOutput, error)
Deletes the specified pipeline.
func (*CodePipeline) DeletePipelineRequest ¶
func (c *CodePipeline) DeletePipelineRequest(input *DeletePipelineInput) (req *request.Request, output *DeletePipelineOutput)
DeletePipelineRequest generates a "aws/request.Request" representing the client's request for the DeletePipeline operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeletePipeline method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeletePipelineRequest method. req, resp := client.DeletePipelineRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) DisableStageTransition ¶
func (c *CodePipeline) DisableStageTransition(input *DisableStageTransitionInput) (*DisableStageTransitionOutput, error)
Prevents artifacts in a pipeline from transitioning to the next stage in the pipeline.
func (*CodePipeline) DisableStageTransitionRequest ¶
func (c *CodePipeline) DisableStageTransitionRequest(input *DisableStageTransitionInput) (req *request.Request, output *DisableStageTransitionOutput)
DisableStageTransitionRequest generates a "aws/request.Request" representing the client's request for the DisableStageTransition operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableStageTransition method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DisableStageTransitionRequest method. req, resp := client.DisableStageTransitionRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) EnableStageTransition ¶
func (c *CodePipeline) EnableStageTransition(input *EnableStageTransitionInput) (*EnableStageTransitionOutput, error)
Enables artifacts in a pipeline to transition to a stage in a pipeline.
func (*CodePipeline) EnableStageTransitionRequest ¶
func (c *CodePipeline) EnableStageTransitionRequest(input *EnableStageTransitionInput) (req *request.Request, output *EnableStageTransitionOutput)
EnableStageTransitionRequest generates a "aws/request.Request" representing the client's request for the EnableStageTransition operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableStageTransition method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the EnableStageTransitionRequest method. req, resp := client.EnableStageTransitionRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) GetJobDetails ¶
func (c *CodePipeline) GetJobDetails(input *GetJobDetailsInput) (*GetJobDetailsOutput, error)
Returns information about a job. Only used for custom actions.
When this API is called, AWS CodePipeline returns temporary credentials
for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. Additionally, this API returns any secret values defined for the action.
func (*CodePipeline) GetJobDetailsRequest ¶
func (c *CodePipeline) GetJobDetailsRequest(input *GetJobDetailsInput) (req *request.Request, output *GetJobDetailsOutput)
GetJobDetailsRequest generates a "aws/request.Request" representing the client's request for the GetJobDetails operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetJobDetails method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetJobDetailsRequest method. req, resp := client.GetJobDetailsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) GetPipeline ¶
func (c *CodePipeline) GetPipeline(input *GetPipelineInput) (*GetPipelineOutput, error)
Returns the metadata, structure, stages, and actions of a pipeline. Can be used to return the entire structure of a pipeline in JSON format, which can then be modified and used to update the pipeline structure with UpdatePipeline.
func (*CodePipeline) GetPipelineRequest ¶
func (c *CodePipeline) GetPipelineRequest(input *GetPipelineInput) (req *request.Request, output *GetPipelineOutput)
GetPipelineRequest generates a "aws/request.Request" representing the client's request for the GetPipeline operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetPipeline method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetPipelineRequest method. req, resp := client.GetPipelineRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) GetPipelineState ¶
func (c *CodePipeline) GetPipelineState(input *GetPipelineStateInput) (*GetPipelineStateOutput, error)
Returns information about the state of a pipeline, including the stages and actions.
func (*CodePipeline) GetPipelineStateRequest ¶
func (c *CodePipeline) GetPipelineStateRequest(input *GetPipelineStateInput) (req *request.Request, output *GetPipelineStateOutput)
GetPipelineStateRequest generates a "aws/request.Request" representing the client's request for the GetPipelineState operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetPipelineState method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetPipelineStateRequest method. req, resp := client.GetPipelineStateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) GetThirdPartyJobDetails ¶
func (c *CodePipeline) GetThirdPartyJobDetails(input *GetThirdPartyJobDetailsInput) (*GetThirdPartyJobDetailsOutput, error)
Requests the details of a job for a third party action. Only used for partner actions.
When this API is called, AWS CodePipeline returns temporary credentials
for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. Additionally, this API returns any secret values defined for the action.
func (*CodePipeline) GetThirdPartyJobDetailsRequest ¶
func (c *CodePipeline) GetThirdPartyJobDetailsRequest(input *GetThirdPartyJobDetailsInput) (req *request.Request, output *GetThirdPartyJobDetailsOutput)
GetThirdPartyJobDetailsRequest generates a "aws/request.Request" representing the client's request for the GetThirdPartyJobDetails operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetThirdPartyJobDetails method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetThirdPartyJobDetailsRequest method. req, resp := client.GetThirdPartyJobDetailsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) ListActionTypes ¶
func (c *CodePipeline) ListActionTypes(input *ListActionTypesInput) (*ListActionTypesOutput, error)
Gets a summary of all AWS CodePipeline action types associated with your account.
func (*CodePipeline) ListActionTypesRequest ¶
func (c *CodePipeline) ListActionTypesRequest(input *ListActionTypesInput) (req *request.Request, output *ListActionTypesOutput)
ListActionTypesRequest generates a "aws/request.Request" representing the client's request for the ListActionTypes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListActionTypes method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListActionTypesRequest method. req, resp := client.ListActionTypesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) ListPipelines ¶
func (c *CodePipeline) ListPipelines(input *ListPipelinesInput) (*ListPipelinesOutput, error)
Gets a summary of all of the pipelines associated with your account.
func (*CodePipeline) ListPipelinesRequest ¶
func (c *CodePipeline) ListPipelinesRequest(input *ListPipelinesInput) (req *request.Request, output *ListPipelinesOutput)
ListPipelinesRequest generates a "aws/request.Request" representing the client's request for the ListPipelines operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListPipelines method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListPipelinesRequest method. req, resp := client.ListPipelinesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PollForJobs ¶
func (c *CodePipeline) PollForJobs(input *PollForJobsInput) (*PollForJobsOutput, error)
Returns information about any jobs for AWS CodePipeline to act upon.
When this API is called, AWS CodePipeline returns temporary credentials
for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts. Additionally, this API returns any secret values defined for the action.
func (*CodePipeline) PollForJobsRequest ¶
func (c *CodePipeline) PollForJobsRequest(input *PollForJobsInput) (req *request.Request, output *PollForJobsOutput)
PollForJobsRequest generates a "aws/request.Request" representing the client's request for the PollForJobs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PollForJobs method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PollForJobsRequest method. req, resp := client.PollForJobsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PollForThirdPartyJobs ¶
func (c *CodePipeline) PollForThirdPartyJobs(input *PollForThirdPartyJobsInput) (*PollForThirdPartyJobsOutput, error)
Determines whether there are any third party jobs for a job worker to act on. Only used for partner actions.
When this API is called, AWS CodePipeline returns temporary credentials
for the Amazon S3 bucket used to store artifacts for the pipeline, if the action requires access to that Amazon S3 bucket for input or output artifacts.
func (*CodePipeline) PollForThirdPartyJobsRequest ¶
func (c *CodePipeline) PollForThirdPartyJobsRequest(input *PollForThirdPartyJobsInput) (req *request.Request, output *PollForThirdPartyJobsOutput)
PollForThirdPartyJobsRequest generates a "aws/request.Request" representing the client's request for the PollForThirdPartyJobs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PollForThirdPartyJobs method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PollForThirdPartyJobsRequest method. req, resp := client.PollForThirdPartyJobsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutActionRevision ¶
func (c *CodePipeline) PutActionRevision(input *PutActionRevisionInput) (*PutActionRevisionOutput, error)
Provides information to AWS CodePipeline about new revisions to a source.
func (*CodePipeline) PutActionRevisionRequest ¶
func (c *CodePipeline) PutActionRevisionRequest(input *PutActionRevisionInput) (req *request.Request, output *PutActionRevisionOutput)
PutActionRevisionRequest generates a "aws/request.Request" representing the client's request for the PutActionRevision operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutActionRevision method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutActionRevisionRequest method. req, resp := client.PutActionRevisionRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutApprovalResult ¶ added in v1.2.3
func (c *CodePipeline) PutApprovalResult(input *PutApprovalResultInput) (*PutApprovalResultOutput, error)
Provides the response to a manual approval request to AWS CodePipeline. Valid responses include Approved and Rejected.
func (*CodePipeline) PutApprovalResultRequest ¶ added in v1.2.3
func (c *CodePipeline) PutApprovalResultRequest(input *PutApprovalResultInput) (req *request.Request, output *PutApprovalResultOutput)
PutApprovalResultRequest generates a "aws/request.Request" representing the client's request for the PutApprovalResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutApprovalResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutApprovalResultRequest method. req, resp := client.PutApprovalResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutJobFailureResult ¶
func (c *CodePipeline) PutJobFailureResult(input *PutJobFailureResultInput) (*PutJobFailureResultOutput, error)
Represents the failure of a job as returned to the pipeline by a job worker. Only used for custom actions.
func (*CodePipeline) PutJobFailureResultRequest ¶
func (c *CodePipeline) PutJobFailureResultRequest(input *PutJobFailureResultInput) (req *request.Request, output *PutJobFailureResultOutput)
PutJobFailureResultRequest generates a "aws/request.Request" representing the client's request for the PutJobFailureResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutJobFailureResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutJobFailureResultRequest method. req, resp := client.PutJobFailureResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutJobSuccessResult ¶
func (c *CodePipeline) PutJobSuccessResult(input *PutJobSuccessResultInput) (*PutJobSuccessResultOutput, error)
Represents the success of a job as returned to the pipeline by a job worker. Only used for custom actions.
func (*CodePipeline) PutJobSuccessResultRequest ¶
func (c *CodePipeline) PutJobSuccessResultRequest(input *PutJobSuccessResultInput) (req *request.Request, output *PutJobSuccessResultOutput)
PutJobSuccessResultRequest generates a "aws/request.Request" representing the client's request for the PutJobSuccessResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutJobSuccessResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutJobSuccessResultRequest method. req, resp := client.PutJobSuccessResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutThirdPartyJobFailureResult ¶
func (c *CodePipeline) PutThirdPartyJobFailureResult(input *PutThirdPartyJobFailureResultInput) (*PutThirdPartyJobFailureResultOutput, error)
Represents the failure of a third party job as returned to the pipeline by a job worker. Only used for partner actions.
func (*CodePipeline) PutThirdPartyJobFailureResultRequest ¶
func (c *CodePipeline) PutThirdPartyJobFailureResultRequest(input *PutThirdPartyJobFailureResultInput) (req *request.Request, output *PutThirdPartyJobFailureResultOutput)
PutThirdPartyJobFailureResultRequest generates a "aws/request.Request" representing the client's request for the PutThirdPartyJobFailureResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutThirdPartyJobFailureResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutThirdPartyJobFailureResultRequest method. req, resp := client.PutThirdPartyJobFailureResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) PutThirdPartyJobSuccessResult ¶
func (c *CodePipeline) PutThirdPartyJobSuccessResult(input *PutThirdPartyJobSuccessResultInput) (*PutThirdPartyJobSuccessResultOutput, error)
Represents the success of a third party job as returned to the pipeline by a job worker. Only used for partner actions.
func (*CodePipeline) PutThirdPartyJobSuccessResultRequest ¶
func (c *CodePipeline) PutThirdPartyJobSuccessResultRequest(input *PutThirdPartyJobSuccessResultInput) (req *request.Request, output *PutThirdPartyJobSuccessResultOutput)
PutThirdPartyJobSuccessResultRequest generates a "aws/request.Request" representing the client's request for the PutThirdPartyJobSuccessResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutThirdPartyJobSuccessResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the PutThirdPartyJobSuccessResultRequest method. req, resp := client.PutThirdPartyJobSuccessResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) RetryStageExecution ¶ added in v1.1.36
func (c *CodePipeline) RetryStageExecution(input *RetryStageExecutionInput) (*RetryStageExecutionOutput, error)
Resumes the pipeline execution by retrying the last failed actions in a stage.
func (*CodePipeline) RetryStageExecutionRequest ¶ added in v1.1.36
func (c *CodePipeline) RetryStageExecutionRequest(input *RetryStageExecutionInput) (req *request.Request, output *RetryStageExecutionOutput)
RetryStageExecutionRequest generates a "aws/request.Request" representing the client's request for the RetryStageExecution operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RetryStageExecution method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RetryStageExecutionRequest method. req, resp := client.RetryStageExecutionRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) StartPipelineExecution ¶
func (c *CodePipeline) StartPipelineExecution(input *StartPipelineExecutionInput) (*StartPipelineExecutionOutput, error)
Starts the specified pipeline. Specifically, it begins processing the latest commit to the source location specified as part of the pipeline.
func (*CodePipeline) StartPipelineExecutionRequest ¶
func (c *CodePipeline) StartPipelineExecutionRequest(input *StartPipelineExecutionInput) (req *request.Request, output *StartPipelineExecutionOutput)
StartPipelineExecutionRequest generates a "aws/request.Request" representing the client's request for the StartPipelineExecution operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartPipelineExecution method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the StartPipelineExecutionRequest method. req, resp := client.StartPipelineExecutionRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*CodePipeline) UpdatePipeline ¶
func (c *CodePipeline) UpdatePipeline(input *UpdatePipelineInput) (*UpdatePipelineOutput, error)
Updates a specified pipeline with edits or changes to its structure. Use a JSON file with the pipeline structure in conjunction with UpdatePipeline to provide the full structure of the pipeline. Updating the pipeline increases the version number of the pipeline by 1.
func (*CodePipeline) UpdatePipelineRequest ¶
func (c *CodePipeline) UpdatePipelineRequest(input *UpdatePipelineInput) (req *request.Request, output *UpdatePipelineOutput)
UpdatePipelineRequest generates a "aws/request.Request" representing the client's request for the UpdatePipeline operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdatePipeline method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdatePipelineRequest method. req, resp := client.UpdatePipelineRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
type CreateCustomActionTypeInput ¶
type CreateCustomActionTypeInput struct { // The category of the custom action, such as a source action or a build action. // // Although Source is listed as a valid value, it is not currently functional. // This value is reserved for future use. Category *string `locationName:"category" type:"string" required:"true" enum:"ActionCategory"` // The configuration properties for the custom action. // // You can refer to a name in the configuration properties of the custom action // within the URL templates by following the format of {Config:name}, as long // as the configuration property is both required and not secret. For more information, // see Create a Custom Action for a Pipeline (http://docs.aws.amazon.com/codepipeline/latest/userguide/how-to-create-custom-action.html). ConfigurationProperties []*ActionConfigurationProperty `locationName:"configurationProperties" type:"list"` // Returns information about the details of an artifact. InputArtifactDetails *ArtifactDetails `locationName:"inputArtifactDetails" type:"structure" required:"true"` // Returns information about the details of an artifact. OutputArtifactDetails *ArtifactDetails `locationName:"outputArtifactDetails" type:"structure" required:"true"` // The provider of the service used in the custom action, such as AWS CodeDeploy. Provider *string `locationName:"provider" min:"1" type:"string" required:"true"` // Returns information about the settings for an action type. Settings *ActionTypeSettings `locationName:"settings" type:"structure"` // The version number of the custom action. Version *string `locationName:"version" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a create custom action operation.
func (CreateCustomActionTypeInput) GoString ¶
func (s CreateCustomActionTypeInput) GoString() string
GoString returns the string representation
func (CreateCustomActionTypeInput) String ¶
func (s CreateCustomActionTypeInput) String() string
String returns the string representation
func (*CreateCustomActionTypeInput) Validate ¶ added in v1.1.21
func (s *CreateCustomActionTypeInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateCustomActionTypeOutput ¶
type CreateCustomActionTypeOutput struct { // Returns information about the details of an action type. ActionType *ActionType `locationName:"actionType" type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the output of a create custom action operation.
func (CreateCustomActionTypeOutput) GoString ¶
func (s CreateCustomActionTypeOutput) GoString() string
GoString returns the string representation
func (CreateCustomActionTypeOutput) String ¶
func (s CreateCustomActionTypeOutput) String() string
String returns the string representation
type CreatePipelineInput ¶
type CreatePipelineInput struct { // Represents the structure of actions and stages to be performed in the pipeline. Pipeline *PipelineDeclaration `locationName:"pipeline" type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the input of a create pipeline action.
func (CreatePipelineInput) GoString ¶
func (s CreatePipelineInput) GoString() string
GoString returns the string representation
func (CreatePipelineInput) String ¶
func (s CreatePipelineInput) String() string
String returns the string representation
func (*CreatePipelineInput) Validate ¶ added in v1.1.21
func (s *CreatePipelineInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreatePipelineOutput ¶
type CreatePipelineOutput struct { // Represents the structure of actions and stages to be performed in the pipeline. Pipeline *PipelineDeclaration `locationName:"pipeline" type:"structure"` // contains filtered or unexported fields }
Represents the output of a create pipeline action.
func (CreatePipelineOutput) GoString ¶
func (s CreatePipelineOutput) GoString() string
GoString returns the string representation
func (CreatePipelineOutput) String ¶
func (s CreatePipelineOutput) String() string
String returns the string representation
type CurrentRevision ¶
type CurrentRevision struct { // The change identifier for the current revision. ChangeIdentifier *string `locationName:"changeIdentifier" min:"1" type:"string" required:"true"` // The revision ID of the current version of an artifact. Revision *string `locationName:"revision" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about a current revision.
func (CurrentRevision) GoString ¶
func (s CurrentRevision) GoString() string
GoString returns the string representation
func (CurrentRevision) String ¶
func (s CurrentRevision) String() string
String returns the string representation
func (*CurrentRevision) Validate ¶ added in v1.1.21
func (s *CurrentRevision) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteCustomActionTypeInput ¶
type DeleteCustomActionTypeInput struct { // The category of the custom action that you want to delete, such as source // or deploy. Category *string `locationName:"category" type:"string" required:"true" enum:"ActionCategory"` // The provider of the service used in the custom action, such as AWS CodeDeploy. Provider *string `locationName:"provider" min:"1" type:"string" required:"true"` // The version of the custom action to delete. Version *string `locationName:"version" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a delete custom action operation. The custom action will be marked as deleted.
func (DeleteCustomActionTypeInput) GoString ¶
func (s DeleteCustomActionTypeInput) GoString() string
GoString returns the string representation
func (DeleteCustomActionTypeInput) String ¶
func (s DeleteCustomActionTypeInput) String() string
String returns the string representation
func (*DeleteCustomActionTypeInput) Validate ¶ added in v1.1.21
func (s *DeleteCustomActionTypeInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteCustomActionTypeOutput ¶
type DeleteCustomActionTypeOutput struct {
// contains filtered or unexported fields
}
func (DeleteCustomActionTypeOutput) GoString ¶
func (s DeleteCustomActionTypeOutput) GoString() string
GoString returns the string representation
func (DeleteCustomActionTypeOutput) String ¶
func (s DeleteCustomActionTypeOutput) String() string
String returns the string representation
type DeletePipelineInput ¶
type DeletePipelineInput struct { // The name of the pipeline to be deleted. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a delete pipeline action.
func (DeletePipelineInput) GoString ¶
func (s DeletePipelineInput) GoString() string
GoString returns the string representation
func (DeletePipelineInput) String ¶
func (s DeletePipelineInput) String() string
String returns the string representation
func (*DeletePipelineInput) Validate ¶ added in v1.1.21
func (s *DeletePipelineInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeletePipelineOutput ¶
type DeletePipelineOutput struct {
// contains filtered or unexported fields
}
func (DeletePipelineOutput) GoString ¶
func (s DeletePipelineOutput) GoString() string
GoString returns the string representation
func (DeletePipelineOutput) String ¶
func (s DeletePipelineOutput) String() string
String returns the string representation
type DisableStageTransitionInput ¶
type DisableStageTransitionInput struct { // The name of the pipeline in which you want to disable the flow of artifacts // from one stage to another. PipelineName *string `locationName:"pipelineName" min:"1" type:"string" required:"true"` // The reason given to the user why a stage is disabled, such as waiting for // manual approval or manual tests. This message is displayed in the pipeline // console UI. Reason *string `locationName:"reason" min:"1" type:"string" required:"true"` // The name of the stage where you want to disable the inbound or outbound transition // of artifacts. StageName *string `locationName:"stageName" min:"1" type:"string" required:"true"` // Specifies whether artifacts will be prevented from transitioning into the // stage and being processed by the actions in that stage (inbound), or prevented // from transitioning from the stage after they have been processed by the actions // in that stage (outbound). TransitionType *string `locationName:"transitionType" type:"string" required:"true" enum:"StageTransitionType"` // contains filtered or unexported fields }
Represents the input of a disable stage transition input action.
func (DisableStageTransitionInput) GoString ¶
func (s DisableStageTransitionInput) GoString() string
GoString returns the string representation
func (DisableStageTransitionInput) String ¶
func (s DisableStageTransitionInput) String() string
String returns the string representation
func (*DisableStageTransitionInput) Validate ¶ added in v1.1.21
func (s *DisableStageTransitionInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DisableStageTransitionOutput ¶
type DisableStageTransitionOutput struct {
// contains filtered or unexported fields
}
func (DisableStageTransitionOutput) GoString ¶
func (s DisableStageTransitionOutput) GoString() string
GoString returns the string representation
func (DisableStageTransitionOutput) String ¶
func (s DisableStageTransitionOutput) String() string
String returns the string representation
type EnableStageTransitionInput ¶
type EnableStageTransitionInput struct { // The name of the pipeline in which you want to enable the flow of artifacts // from one stage to another. PipelineName *string `locationName:"pipelineName" min:"1" type:"string" required:"true"` // The name of the stage where you want to enable the transition of artifacts, // either into the stage (inbound) or from that stage to the next stage (outbound). StageName *string `locationName:"stageName" min:"1" type:"string" required:"true"` // Specifies whether artifacts will be allowed to enter the stage and be processed // by the actions in that stage (inbound) or whether already-processed artifacts // will be allowed to transition to the next stage (outbound). TransitionType *string `locationName:"transitionType" type:"string" required:"true" enum:"StageTransitionType"` // contains filtered or unexported fields }
Represents the input of an enable stage transition action.
func (EnableStageTransitionInput) GoString ¶
func (s EnableStageTransitionInput) GoString() string
GoString returns the string representation
func (EnableStageTransitionInput) String ¶
func (s EnableStageTransitionInput) String() string
String returns the string representation
func (*EnableStageTransitionInput) Validate ¶ added in v1.1.21
func (s *EnableStageTransitionInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type EnableStageTransitionOutput ¶
type EnableStageTransitionOutput struct {
// contains filtered or unexported fields
}
func (EnableStageTransitionOutput) GoString ¶
func (s EnableStageTransitionOutput) GoString() string
GoString returns the string representation
func (EnableStageTransitionOutput) String ¶
func (s EnableStageTransitionOutput) String() string
String returns the string representation
type EncryptionKey ¶ added in v0.9.5
type EncryptionKey struct { // The ID used to identify the key. For an AWS KMS key, this is the key ID or // key ARN. Id *string `locationName:"id" min:"1" type:"string" required:"true"` // The type of encryption key, such as an AWS Key Management Service (AWS KMS) // key. When creating or updating a pipeline, the value must be set to 'KMS'. Type *string `locationName:"type" type:"string" required:"true" enum:"EncryptionKeyType"` // contains filtered or unexported fields }
Represents information about the key used to encrypt data in the artifact store, such as an AWS Key Management Service (AWS KMS) key.
func (EncryptionKey) GoString ¶ added in v0.9.5
func (s EncryptionKey) GoString() string
GoString returns the string representation
func (EncryptionKey) String ¶ added in v0.9.5
func (s EncryptionKey) String() string
String returns the string representation
func (*EncryptionKey) Validate ¶ added in v1.1.21
func (s *EncryptionKey) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ErrorDetails ¶
type ErrorDetails struct { // The system ID or error number code of the error. Code *string `locationName:"code" type:"string"` // The text of the error message. Message *string `locationName:"message" type:"string"` // contains filtered or unexported fields }
Represents information about an error in AWS CodePipeline.
func (ErrorDetails) GoString ¶
func (s ErrorDetails) GoString() string
GoString returns the string representation
func (ErrorDetails) String ¶
func (s ErrorDetails) String() string
String returns the string representation
type ExecutionDetails ¶
type ExecutionDetails struct { // The system-generated unique ID of this action used to identify this job worker // in any external systems, such as AWS CodeDeploy. ExternalExecutionId *string `locationName:"externalExecutionId" min:"1" type:"string"` // The percentage of work completed on the action, represented on a scale of // zero to one hundred percent. PercentComplete *int64 `locationName:"percentComplete" type:"integer"` // The summary of the current status of the actions. Summary *string `locationName:"summary" type:"string"` // contains filtered or unexported fields }
The details of the actions taken and results produced on an artifact as it passes through stages in the pipeline.
func (ExecutionDetails) GoString ¶
func (s ExecutionDetails) GoString() string
GoString returns the string representation
func (ExecutionDetails) String ¶
func (s ExecutionDetails) String() string
String returns the string representation
func (*ExecutionDetails) Validate ¶ added in v1.1.23
func (s *ExecutionDetails) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type FailureDetails ¶
type FailureDetails struct { // The external ID of the run of the action that failed. ExternalExecutionId *string `locationName:"externalExecutionId" min:"1" type:"string"` // The message about the failure. Message *string `locationName:"message" type:"string" required:"true"` // The type of the failure. Type *string `locationName:"type" type:"string" required:"true" enum:"FailureType"` // contains filtered or unexported fields }
Represents information about failure details.
func (FailureDetails) GoString ¶
func (s FailureDetails) GoString() string
GoString returns the string representation
func (FailureDetails) String ¶
func (s FailureDetails) String() string
String returns the string representation
func (*FailureDetails) Validate ¶ added in v1.1.21
func (s *FailureDetails) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetJobDetailsInput ¶
type GetJobDetailsInput struct { // The unique system-generated ID for the job. JobId *string `locationName:"jobId" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a get job details action.
func (GetJobDetailsInput) GoString ¶
func (s GetJobDetailsInput) GoString() string
GoString returns the string representation
func (GetJobDetailsInput) String ¶
func (s GetJobDetailsInput) String() string
String returns the string representation
func (*GetJobDetailsInput) Validate ¶ added in v1.1.21
func (s *GetJobDetailsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetJobDetailsOutput ¶
type GetJobDetailsOutput struct { // The details of the job. // // If AWSSessionCredentials is used, a long-running job can call GetJobDetails // again to obtain new credentials. JobDetails *JobDetails `locationName:"jobDetails" type:"structure"` // contains filtered or unexported fields }
Represents the output of a get job details action.
func (GetJobDetailsOutput) GoString ¶
func (s GetJobDetailsOutput) GoString() string
GoString returns the string representation
func (GetJobDetailsOutput) String ¶
func (s GetJobDetailsOutput) String() string
String returns the string representation
type GetPipelineInput ¶
type GetPipelineInput struct { // The name of the pipeline for which you want to get information. Pipeline // names must be unique under an Amazon Web Services (AWS) user account. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // The version number of the pipeline. If you do not specify a version, defaults // to the most current version. Version *int64 `locationName:"version" min:"1" type:"integer"` // contains filtered or unexported fields }
Represents the input of a get pipeline action.
func (GetPipelineInput) GoString ¶
func (s GetPipelineInput) GoString() string
GoString returns the string representation
func (GetPipelineInput) String ¶
func (s GetPipelineInput) String() string
String returns the string representation
func (*GetPipelineInput) Validate ¶ added in v1.1.21
func (s *GetPipelineInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetPipelineOutput ¶
type GetPipelineOutput struct { // Represents the structure of actions and stages to be performed in the pipeline. Pipeline *PipelineDeclaration `locationName:"pipeline" type:"structure"` // contains filtered or unexported fields }
Represents the output of a get pipeline action.
func (GetPipelineOutput) GoString ¶
func (s GetPipelineOutput) GoString() string
GoString returns the string representation
func (GetPipelineOutput) String ¶
func (s GetPipelineOutput) String() string
String returns the string representation
type GetPipelineStateInput ¶
type GetPipelineStateInput struct { // The name of the pipeline about which you want to get information. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a get pipeline state action.
func (GetPipelineStateInput) GoString ¶
func (s GetPipelineStateInput) GoString() string
GoString returns the string representation
func (GetPipelineStateInput) String ¶
func (s GetPipelineStateInput) String() string
String returns the string representation
func (*GetPipelineStateInput) Validate ¶ added in v1.1.21
func (s *GetPipelineStateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetPipelineStateOutput ¶
type GetPipelineStateOutput struct { // The date and time the pipeline was created, in timestamp format. Created *time.Time `locationName:"created" type:"timestamp" timestampFormat:"unix"` // The name of the pipeline for which you want to get the state. PipelineName *string `locationName:"pipelineName" min:"1" type:"string"` // The version number of the pipeline. // // A newly-created pipeline is always assigned a version number of 1. PipelineVersion *int64 `locationName:"pipelineVersion" min:"1" type:"integer"` // A list of the pipeline stage output information, including stage name, state, // most recent run details, whether the stage is disabled, and other data. StageStates []*StageState `locationName:"stageStates" type:"list"` // The date and time the pipeline was last updated, in timestamp format. Updated *time.Time `locationName:"updated" type:"timestamp" timestampFormat:"unix"` // contains filtered or unexported fields }
Represents the output of a get pipeline state action.
func (GetPipelineStateOutput) GoString ¶
func (s GetPipelineStateOutput) GoString() string
GoString returns the string representation
func (GetPipelineStateOutput) String ¶
func (s GetPipelineStateOutput) String() string
String returns the string representation
type GetThirdPartyJobDetailsInput ¶
type GetThirdPartyJobDetailsInput struct { // The clientToken portion of the clientId and clientToken pair used to verify // that the calling entity is allowed access to the job and its details. ClientToken *string `locationName:"clientToken" type:"string" required:"true"` // The unique system-generated ID used for identifying the job. JobId *string `locationName:"jobId" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a get third party job details action.
func (GetThirdPartyJobDetailsInput) GoString ¶
func (s GetThirdPartyJobDetailsInput) GoString() string
GoString returns the string representation
func (GetThirdPartyJobDetailsInput) String ¶
func (s GetThirdPartyJobDetailsInput) String() string
String returns the string representation
func (*GetThirdPartyJobDetailsInput) Validate ¶ added in v1.1.21
func (s *GetThirdPartyJobDetailsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetThirdPartyJobDetailsOutput ¶
type GetThirdPartyJobDetailsOutput struct { // The details of the job, including any protected values defined for the job. JobDetails *ThirdPartyJobDetails `locationName:"jobDetails" type:"structure"` // contains filtered or unexported fields }
Represents the output of a get third party job details action.
func (GetThirdPartyJobDetailsOutput) GoString ¶
func (s GetThirdPartyJobDetailsOutput) GoString() string
GoString returns the string representation
func (GetThirdPartyJobDetailsOutput) String ¶
func (s GetThirdPartyJobDetailsOutput) String() string
String returns the string representation
type InputArtifact ¶
type InputArtifact struct { // The name of the artifact to be worked on, for example, "My App". // // The input artifact of an action must exactly match the output artifact declared // in a preceding action, but the input artifact does not have to be the next // action in strict sequence from the action that provided the output artifact. // Actions in parallel can declare different output artifacts, which are in // turn consumed by different following actions. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about an artifact to be worked on, such as a test or build artifact.
func (InputArtifact) GoString ¶
func (s InputArtifact) GoString() string
GoString returns the string representation
func (InputArtifact) String ¶
func (s InputArtifact) String() string
String returns the string representation
func (*InputArtifact) Validate ¶ added in v1.1.21
func (s *InputArtifact) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type Job ¶
type Job struct { // The ID of the AWS account to use when performing the job. AccountId *string `locationName:"accountId" type:"string"` // Additional data about a job. Data *JobData `locationName:"data" type:"structure"` // The unique system-generated ID of the job. Id *string `locationName:"id" type:"string"` // A system-generated random number that AWS CodePipeline uses to ensure that // the job is being worked on by only one job worker. This number must be returned // in the response. Nonce *string `locationName:"nonce" type:"string"` // contains filtered or unexported fields }
Represents information about a job.
type JobData ¶
type JobData struct { // Represents information about an action configuration. ActionConfiguration *ActionConfiguration `locationName:"actionConfiguration" type:"structure"` // Represents information about an action type. ActionTypeId *ActionTypeId `locationName:"actionTypeId" type:"structure"` // Represents an AWS session credentials object. These credentials are temporary // credentials that are issued by AWS Secure Token Service (STS). They can be // used to access input and output artifacts in the Amazon S3 bucket used to // store artifact for the pipeline in AWS CodePipeline. ArtifactCredentials *AWSSessionCredentials `locationName:"artifactCredentials" type:"structure"` // A system-generated token, such as a AWS CodeDeploy deployment ID, that a // job requires in order to continue the job asynchronously. ContinuationToken *string `locationName:"continuationToken" type:"string"` // Represents information about the key used to encrypt data in the artifact // store, such as an AWS Key Management Service (AWS KMS) key. EncryptionKey *EncryptionKey `locationName:"encryptionKey" type:"structure"` // The artifact supplied to the job. InputArtifacts []*Artifact `locationName:"inputArtifacts" type:"list"` // The output of the job. OutputArtifacts []*Artifact `locationName:"outputArtifacts" type:"list"` // Represents information about a pipeline to a job worker. PipelineContext *PipelineContext `locationName:"pipelineContext" type:"structure"` // contains filtered or unexported fields }
Represents additional information about a job required for a job worker to complete the job.
type JobDetails ¶
type JobDetails struct { // The AWS account ID associated with the job. AccountId *string `locationName:"accountId" type:"string"` // Represents additional information about a job required for a job worker to // complete the job. Data *JobData `locationName:"data" type:"structure"` // The unique system-generated ID of the job. Id *string `locationName:"id" type:"string"` // contains filtered or unexported fields }
Represents information about the details of a job.
func (JobDetails) GoString ¶
func (s JobDetails) GoString() string
GoString returns the string representation
func (JobDetails) String ¶
func (s JobDetails) String() string
String returns the string representation
type ListActionTypesInput ¶
type ListActionTypesInput struct { // Filters the list of action types to those created by a specified entity. ActionOwnerFilter *string `locationName:"actionOwnerFilter" type:"string" enum:"ActionOwner"` // An identifier that was returned from the previous list action types call, // which can be used to return the next set of action types in the list. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Represents the input of a list action types action.
func (ListActionTypesInput) GoString ¶
func (s ListActionTypesInput) GoString() string
GoString returns the string representation
func (ListActionTypesInput) String ¶
func (s ListActionTypesInput) String() string
String returns the string representation
type ListActionTypesOutput ¶
type ListActionTypesOutput struct { // Provides details of the action types. ActionTypes []*ActionType `locationName:"actionTypes" type:"list" required:"true"` // If the amount of returned information is significantly large, an identifier // is also returned which can be used in a subsequent list action types call // to return the next set of action types in the list. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Represents the output of a list action types action.
func (ListActionTypesOutput) GoString ¶
func (s ListActionTypesOutput) GoString() string
GoString returns the string representation
func (ListActionTypesOutput) String ¶
func (s ListActionTypesOutput) String() string
String returns the string representation
type ListPipelinesInput ¶
type ListPipelinesInput struct { // An identifier that was returned from the previous list pipelines call, which // can be used to return the next set of pipelines in the list. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Represents the input of a list pipelines action.
func (ListPipelinesInput) GoString ¶
func (s ListPipelinesInput) GoString() string
GoString returns the string representation
func (ListPipelinesInput) String ¶
func (s ListPipelinesInput) String() string
String returns the string representation
type ListPipelinesOutput ¶
type ListPipelinesOutput struct { // If the amount of returned information is significantly large, an identifier // is also returned which can be used in a subsequent list pipelines call to // return the next set of pipelines in the list. NextToken *string `locationName:"nextToken" type:"string"` // The list of pipelines. Pipelines []*PipelineSummary `locationName:"pipelines" type:"list"` // contains filtered or unexported fields }
Represents the output of a list pipelines action.
func (ListPipelinesOutput) GoString ¶
func (s ListPipelinesOutput) GoString() string
GoString returns the string representation
func (ListPipelinesOutput) String ¶
func (s ListPipelinesOutput) String() string
String returns the string representation
type OutputArtifact ¶
type OutputArtifact struct { // The name of the output of an artifact, such as "My App". // // The input artifact of an action must exactly match the output artifact declared // in a preceding action, but the input artifact does not have to be the next // action in strict sequence from the action that provided the output artifact. // Actions in parallel can declare different output artifacts, which are in // turn consumed by different following actions. // // Output artifact names must be unique within a pipeline. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about the output of an action.
func (OutputArtifact) GoString ¶
func (s OutputArtifact) GoString() string
GoString returns the string representation
func (OutputArtifact) String ¶
func (s OutputArtifact) String() string
String returns the string representation
func (*OutputArtifact) Validate ¶ added in v1.1.21
func (s *OutputArtifact) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PipelineContext ¶
type PipelineContext struct { // Represents the context of an action within the stage of a pipeline to a job // worker. Action *ActionContext `locationName:"action" type:"structure"` // The name of the pipeline. This is a user-specified value. Pipeline names // must be unique across all pipeline names under an Amazon Web Services account. PipelineName *string `locationName:"pipelineName" min:"1" type:"string"` // The stage of the pipeline. Stage *StageContext `locationName:"stage" type:"structure"` // contains filtered or unexported fields }
Represents information about a pipeline to a job worker.
func (PipelineContext) GoString ¶
func (s PipelineContext) GoString() string
GoString returns the string representation
func (PipelineContext) String ¶
func (s PipelineContext) String() string
String returns the string representation
type PipelineDeclaration ¶
type PipelineDeclaration struct { // The Amazon S3 location where artifacts are stored for the pipeline. If this // Amazon S3 bucket is created manually, it must meet the requirements for AWS // CodePipeline. For more information, see the Concepts (http://docs.aws.amazon.com/codepipeline/latest/userguide/concepts.html#CPS3Bucket). ArtifactStore *ArtifactStore `locationName:"artifactStore" type:"structure" required:"true"` // The name of the action to be performed. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform // actions with no actionRoleArn, or to use to assume roles for actions with // an actionRoleArn. RoleArn *string `locationName:"roleArn" type:"string" required:"true"` // The stage in which to perform the action. Stages []*StageDeclaration `locationName:"stages" type:"list" required:"true"` // The version number of the pipeline. A new pipeline always has a version number // of 1. This number is automatically incremented when a pipeline is updated. Version *int64 `locationName:"version" min:"1" type:"integer"` // contains filtered or unexported fields }
Represents the structure of actions and stages to be performed in the pipeline.
func (PipelineDeclaration) GoString ¶
func (s PipelineDeclaration) GoString() string
GoString returns the string representation
func (PipelineDeclaration) String ¶
func (s PipelineDeclaration) String() string
String returns the string representation
func (*PipelineDeclaration) Validate ¶ added in v1.1.21
func (s *PipelineDeclaration) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PipelineSummary ¶
type PipelineSummary struct { // The date and time the pipeline was created, in timestamp format. Created *time.Time `locationName:"created" type:"timestamp" timestampFormat:"unix"` // The name of the pipeline. Name *string `locationName:"name" min:"1" type:"string"` // The date and time of the last update to the pipeline, in timestamp format. Updated *time.Time `locationName:"updated" type:"timestamp" timestampFormat:"unix"` // The version number of the pipeline. Version *int64 `locationName:"version" min:"1" type:"integer"` // contains filtered or unexported fields }
Returns a summary of a pipeline.
func (PipelineSummary) GoString ¶
func (s PipelineSummary) GoString() string
GoString returns the string representation
func (PipelineSummary) String ¶
func (s PipelineSummary) String() string
String returns the string representation
type PollForJobsInput ¶
type PollForJobsInput struct { // Represents information about an action type. ActionTypeId *ActionTypeId `locationName:"actionTypeId" type:"structure" required:"true"` // The maximum number of jobs to return in a poll for jobs call. MaxBatchSize *int64 `locationName:"maxBatchSize" min:"1" type:"integer"` // A map of property names and values. For an action type with no queryable // properties, this value must be null or an empty map. For an action type with // a queryable property, you must supply that property as a key in the map. // Only jobs whose action configuration matches the mapped value will be returned. QueryParam map[string]*string `locationName:"queryParam" type:"map"` // contains filtered or unexported fields }
Represents the input of a poll for jobs action.
func (PollForJobsInput) GoString ¶
func (s PollForJobsInput) GoString() string
GoString returns the string representation
func (PollForJobsInput) String ¶
func (s PollForJobsInput) String() string
String returns the string representation
func (*PollForJobsInput) Validate ¶ added in v1.1.21
func (s *PollForJobsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PollForJobsOutput ¶
type PollForJobsOutput struct { // Information about the jobs to take action on. Jobs []*Job `locationName:"jobs" type:"list"` // contains filtered or unexported fields }
Represents the output of a poll for jobs action.
func (PollForJobsOutput) GoString ¶
func (s PollForJobsOutput) GoString() string
GoString returns the string representation
func (PollForJobsOutput) String ¶
func (s PollForJobsOutput) String() string
String returns the string representation
type PollForThirdPartyJobsInput ¶
type PollForThirdPartyJobsInput struct { // Represents information about an action type. ActionTypeId *ActionTypeId `locationName:"actionTypeId" type:"structure" required:"true"` // The maximum number of jobs to return in a poll for jobs call. MaxBatchSize *int64 `locationName:"maxBatchSize" min:"1" type:"integer"` // contains filtered or unexported fields }
Represents the input of a poll for third party jobs action.
func (PollForThirdPartyJobsInput) GoString ¶
func (s PollForThirdPartyJobsInput) GoString() string
GoString returns the string representation
func (PollForThirdPartyJobsInput) String ¶
func (s PollForThirdPartyJobsInput) String() string
String returns the string representation
func (*PollForThirdPartyJobsInput) Validate ¶ added in v1.1.21
func (s *PollForThirdPartyJobsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PollForThirdPartyJobsOutput ¶
type PollForThirdPartyJobsOutput struct { // Information about the jobs to take action on. Jobs []*ThirdPartyJob `locationName:"jobs" type:"list"` // contains filtered or unexported fields }
Represents the output of a poll for third party jobs action.
func (PollForThirdPartyJobsOutput) GoString ¶
func (s PollForThirdPartyJobsOutput) GoString() string
GoString returns the string representation
func (PollForThirdPartyJobsOutput) String ¶
func (s PollForThirdPartyJobsOutput) String() string
String returns the string representation
type PutActionRevisionInput ¶
type PutActionRevisionInput struct { // The name of the action that will process the revision. ActionName *string `locationName:"actionName" min:"1" type:"string" required:"true"` // Represents information about the version (or revision) of an action. ActionRevision *ActionRevision `locationName:"actionRevision" type:"structure" required:"true"` // The name of the pipeline that will start processing the revision to the source. PipelineName *string `locationName:"pipelineName" min:"1" type:"string" required:"true"` // The name of the stage that contains the action that will act upon the revision. StageName *string `locationName:"stageName" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a put action revision action.
func (PutActionRevisionInput) GoString ¶
func (s PutActionRevisionInput) GoString() string
GoString returns the string representation
func (PutActionRevisionInput) String ¶
func (s PutActionRevisionInput) String() string
String returns the string representation
func (*PutActionRevisionInput) Validate ¶ added in v1.1.21
func (s *PutActionRevisionInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutActionRevisionOutput ¶
type PutActionRevisionOutput struct { // The new revision number or ID for the revision after the action completes. NewRevision *bool `locationName:"newRevision" type:"boolean"` // The ID of the current workflow state of the pipeline. PipelineExecutionId *string `locationName:"pipelineExecutionId" type:"string"` // contains filtered or unexported fields }
Represents the output of a put action revision action.
func (PutActionRevisionOutput) GoString ¶
func (s PutActionRevisionOutput) GoString() string
GoString returns the string representation
func (PutActionRevisionOutput) String ¶
func (s PutActionRevisionOutput) String() string
String returns the string representation
type PutApprovalResultInput ¶ added in v1.2.3
type PutApprovalResultInput struct { // The name of the action for which approval is requested. ActionName *string `locationName:"actionName" min:"1" type:"string" required:"true"` // The name of the pipeline that contains the action. PipelineName *string `locationName:"pipelineName" min:"1" type:"string" required:"true"` // Represents information about the result of the approval request. Result *ApprovalResult `locationName:"result" type:"structure" required:"true"` // The name of the stage that contains the action. StageName *string `locationName:"stageName" min:"1" type:"string" required:"true"` // The system-generated token used to identify a unique approval request. The // token for each open approval request can be obtained using the GetPipelineState // action and is used to validate that the approval request corresponding to // this token is still valid. Token *string `locationName:"token" type:"string"` // contains filtered or unexported fields }
Represents the input of a put approval result action.
func (PutApprovalResultInput) GoString ¶ added in v1.2.3
func (s PutApprovalResultInput) GoString() string
GoString returns the string representation
func (PutApprovalResultInput) String ¶ added in v1.2.3
func (s PutApprovalResultInput) String() string
String returns the string representation
func (*PutApprovalResultInput) Validate ¶ added in v1.2.3
func (s *PutApprovalResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutApprovalResultOutput ¶ added in v1.2.3
type PutApprovalResultOutput struct { // The timestamp showing when the approval or rejection was submitted. ApprovedAt *time.Time `locationName:"approvedAt" type:"timestamp" timestampFormat:"unix"` // contains filtered or unexported fields }
Represents the output of a put approval result action.
func (PutApprovalResultOutput) GoString ¶ added in v1.2.3
func (s PutApprovalResultOutput) GoString() string
GoString returns the string representation
func (PutApprovalResultOutput) String ¶ added in v1.2.3
func (s PutApprovalResultOutput) String() string
String returns the string representation
type PutJobFailureResultInput ¶
type PutJobFailureResultInput struct { // The details about the failure of a job. FailureDetails *FailureDetails `locationName:"failureDetails" type:"structure" required:"true"` // The unique system-generated ID of the job that failed. This is the same ID // returned from PollForJobs. JobId *string `locationName:"jobId" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a put job failure result action.
func (PutJobFailureResultInput) GoString ¶
func (s PutJobFailureResultInput) GoString() string
GoString returns the string representation
func (PutJobFailureResultInput) String ¶
func (s PutJobFailureResultInput) String() string
String returns the string representation
func (*PutJobFailureResultInput) Validate ¶ added in v1.1.21
func (s *PutJobFailureResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutJobFailureResultOutput ¶
type PutJobFailureResultOutput struct {
// contains filtered or unexported fields
}
func (PutJobFailureResultOutput) GoString ¶
func (s PutJobFailureResultOutput) GoString() string
GoString returns the string representation
func (PutJobFailureResultOutput) String ¶
func (s PutJobFailureResultOutput) String() string
String returns the string representation
type PutJobSuccessResultInput ¶
type PutJobSuccessResultInput struct { // A token generated by a job worker, such as an AWS CodeDeploy deployment ID, // that a successful job provides to identify a custom action in progress. Future // jobs will use this token in order to identify the running instance of the // action. It can be reused to return additional information about the progress // of the custom action. When the action is complete, no continuation token // should be supplied. ContinuationToken *string `locationName:"continuationToken" type:"string"` // The ID of the current revision of the artifact successfully worked upon by // the job. CurrentRevision *CurrentRevision `locationName:"currentRevision" type:"structure"` // The execution details of the successful job, such as the actions taken by // the job worker. ExecutionDetails *ExecutionDetails `locationName:"executionDetails" type:"structure"` // The unique system-generated ID of the job that succeeded. This is the same // ID returned from PollForJobs. JobId *string `locationName:"jobId" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a put job success result action.
func (PutJobSuccessResultInput) GoString ¶
func (s PutJobSuccessResultInput) GoString() string
GoString returns the string representation
func (PutJobSuccessResultInput) String ¶
func (s PutJobSuccessResultInput) String() string
String returns the string representation
func (*PutJobSuccessResultInput) Validate ¶ added in v1.1.21
func (s *PutJobSuccessResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutJobSuccessResultOutput ¶
type PutJobSuccessResultOutput struct {
// contains filtered or unexported fields
}
func (PutJobSuccessResultOutput) GoString ¶
func (s PutJobSuccessResultOutput) GoString() string
GoString returns the string representation
func (PutJobSuccessResultOutput) String ¶
func (s PutJobSuccessResultOutput) String() string
String returns the string representation
type PutThirdPartyJobFailureResultInput ¶
type PutThirdPartyJobFailureResultInput struct { // The clientToken portion of the clientId and clientToken pair used to verify // that the calling entity is allowed access to the job and its details. ClientToken *string `locationName:"clientToken" type:"string" required:"true"` // Represents information about failure details. FailureDetails *FailureDetails `locationName:"failureDetails" type:"structure" required:"true"` // The ID of the job that failed. This is the same ID returned from PollForThirdPartyJobs. JobId *string `locationName:"jobId" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a third party job failure result action.
func (PutThirdPartyJobFailureResultInput) GoString ¶
func (s PutThirdPartyJobFailureResultInput) GoString() string
GoString returns the string representation
func (PutThirdPartyJobFailureResultInput) String ¶
func (s PutThirdPartyJobFailureResultInput) String() string
String returns the string representation
func (*PutThirdPartyJobFailureResultInput) Validate ¶ added in v1.1.21
func (s *PutThirdPartyJobFailureResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutThirdPartyJobFailureResultOutput ¶
type PutThirdPartyJobFailureResultOutput struct {
// contains filtered or unexported fields
}
func (PutThirdPartyJobFailureResultOutput) GoString ¶
func (s PutThirdPartyJobFailureResultOutput) GoString() string
GoString returns the string representation
func (PutThirdPartyJobFailureResultOutput) String ¶
func (s PutThirdPartyJobFailureResultOutput) String() string
String returns the string representation
type PutThirdPartyJobSuccessResultInput ¶
type PutThirdPartyJobSuccessResultInput struct { // The clientToken portion of the clientId and clientToken pair used to verify // that the calling entity is allowed access to the job and its details. ClientToken *string `locationName:"clientToken" type:"string" required:"true"` // A token generated by a job worker, such as an AWS CodeDeploy deployment ID, // that a successful job provides to identify a partner action in progress. // Future jobs will use this token in order to identify the running instance // of the action. It can be reused to return additional information about the // progress of the partner action. When the action is complete, no continuation // token should be supplied. ContinuationToken *string `locationName:"continuationToken" type:"string"` // Represents information about a current revision. CurrentRevision *CurrentRevision `locationName:"currentRevision" type:"structure"` // The details of the actions taken and results produced on an artifact as it // passes through stages in the pipeline. ExecutionDetails *ExecutionDetails `locationName:"executionDetails" type:"structure"` // The ID of the job that successfully completed. This is the same ID returned // from PollForThirdPartyJobs. JobId *string `locationName:"jobId" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a put third party job success result action.
func (PutThirdPartyJobSuccessResultInput) GoString ¶
func (s PutThirdPartyJobSuccessResultInput) GoString() string
GoString returns the string representation
func (PutThirdPartyJobSuccessResultInput) String ¶
func (s PutThirdPartyJobSuccessResultInput) String() string
String returns the string representation
func (*PutThirdPartyJobSuccessResultInput) Validate ¶ added in v1.1.21
func (s *PutThirdPartyJobSuccessResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type PutThirdPartyJobSuccessResultOutput ¶
type PutThirdPartyJobSuccessResultOutput struct {
// contains filtered or unexported fields
}
func (PutThirdPartyJobSuccessResultOutput) GoString ¶
func (s PutThirdPartyJobSuccessResultOutput) GoString() string
GoString returns the string representation
func (PutThirdPartyJobSuccessResultOutput) String ¶
func (s PutThirdPartyJobSuccessResultOutput) String() string
String returns the string representation
type RetryStageExecutionInput ¶ added in v1.1.36
type RetryStageExecutionInput struct { // The ID of the pipeline execution in the failed stage to be retried. Use the // GetPipelineState action to retrieve the current pipelineExecutionId of the // failed stage PipelineExecutionId *string `locationName:"pipelineExecutionId" type:"string" required:"true"` // The name of the pipeline that contains the failed stage. PipelineName *string `locationName:"pipelineName" min:"1" type:"string" required:"true"` // The scope of the retry attempt. Currently, the only supported value is FAILED_ACTIONS. RetryMode *string `locationName:"retryMode" type:"string" required:"true" enum:"StageRetryMode"` // The name of the failed stage to be retried. StageName *string `locationName:"stageName" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a retry stage execution action.
func (RetryStageExecutionInput) GoString ¶ added in v1.1.36
func (s RetryStageExecutionInput) GoString() string
GoString returns the string representation
func (RetryStageExecutionInput) String ¶ added in v1.1.36
func (s RetryStageExecutionInput) String() string
String returns the string representation
func (*RetryStageExecutionInput) Validate ¶ added in v1.1.36
func (s *RetryStageExecutionInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RetryStageExecutionOutput ¶ added in v1.1.36
type RetryStageExecutionOutput struct { // The ID of the current workflow execution in the failed stage. PipelineExecutionId *string `locationName:"pipelineExecutionId" type:"string"` // contains filtered or unexported fields }
Represents the output of a retry stage execution action.
func (RetryStageExecutionOutput) GoString ¶ added in v1.1.36
func (s RetryStageExecutionOutput) GoString() string
GoString returns the string representation
func (RetryStageExecutionOutput) String ¶ added in v1.1.36
func (s RetryStageExecutionOutput) String() string
String returns the string representation
type S3ArtifactLocation ¶
type S3ArtifactLocation struct { // The name of the Amazon S3 bucket. BucketName *string `locationName:"bucketName" type:"string" required:"true"` // The key of the object in the Amazon S3 bucket, which uniquely identifies // the object in the bucket. ObjectKey *string `locationName:"objectKey" type:"string" required:"true"` // contains filtered or unexported fields }
The location of the Amazon S3 bucket that contains a revision.
func (S3ArtifactLocation) GoString ¶
func (s S3ArtifactLocation) GoString() string
GoString returns the string representation
func (S3ArtifactLocation) String ¶
func (s S3ArtifactLocation) String() string
String returns the string representation
type StageContext ¶
type StageContext struct { // The name of the stage. Name *string `locationName:"name" min:"1" type:"string"` // contains filtered or unexported fields }
Represents information about a stage to a job worker.
func (StageContext) GoString ¶
func (s StageContext) GoString() string
GoString returns the string representation
func (StageContext) String ¶
func (s StageContext) String() string
String returns the string representation
type StageDeclaration ¶
type StageDeclaration struct { // The actions included in a stage. Actions []*ActionDeclaration `locationName:"actions" type:"list" required:"true"` // Reserved for future use. Blockers []*BlockerDeclaration `locationName:"blockers" type:"list"` // The name of the stage. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents information about a stage and its definition.
func (StageDeclaration) GoString ¶
func (s StageDeclaration) GoString() string
GoString returns the string representation
func (StageDeclaration) String ¶
func (s StageDeclaration) String() string
String returns the string representation
func (*StageDeclaration) Validate ¶ added in v1.1.21
func (s *StageDeclaration) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type StageExecution ¶ added in v1.1.36
type StageExecution struct { // The ID of the pipeline execution associated with the stage. PipelineExecutionId *string `locationName:"pipelineExecutionId" type:"string" required:"true"` // The status of the stage, or for a completed stage, the last status of the // stage. Status *string `locationName:"status" type:"string" required:"true" enum:"StageExecutionStatus"` // contains filtered or unexported fields }
Represents information about the run of a stage.
func (StageExecution) GoString ¶ added in v1.1.36
func (s StageExecution) GoString() string
GoString returns the string representation
func (StageExecution) String ¶ added in v1.1.36
func (s StageExecution) String() string
String returns the string representation
type StageState ¶
type StageState struct { // The state of the stage. ActionStates []*ActionState `locationName:"actionStates" type:"list"` // The state of the inbound transition, which is either enabled or disabled. InboundTransitionState *TransitionState `locationName:"inboundTransitionState" type:"structure"` // Information about the latest execution in the stage, including its ID and // status. LatestExecution *StageExecution `locationName:"latestExecution" type:"structure"` // The name of the stage. StageName *string `locationName:"stageName" min:"1" type:"string"` // contains filtered or unexported fields }
Represents information about the state of the stage.
func (StageState) GoString ¶
func (s StageState) GoString() string
GoString returns the string representation
func (StageState) String ¶
func (s StageState) String() string
String returns the string representation
type StartPipelineExecutionInput ¶
type StartPipelineExecutionInput struct { // The name of the pipeline to start. Name *string `locationName:"name" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
Represents the input of a start pipeline execution action.
func (StartPipelineExecutionInput) GoString ¶
func (s StartPipelineExecutionInput) GoString() string
GoString returns the string representation
func (StartPipelineExecutionInput) String ¶
func (s StartPipelineExecutionInput) String() string
String returns the string representation
func (*StartPipelineExecutionInput) Validate ¶ added in v1.1.21
func (s *StartPipelineExecutionInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type StartPipelineExecutionOutput ¶
type StartPipelineExecutionOutput struct { // The unique system-generated ID of the pipeline that was started. PipelineExecutionId *string `locationName:"pipelineExecutionId" type:"string"` // contains filtered or unexported fields }
Represents the output of a start pipeline execution action.
func (StartPipelineExecutionOutput) GoString ¶
func (s StartPipelineExecutionOutput) GoString() string
GoString returns the string representation
func (StartPipelineExecutionOutput) String ¶
func (s StartPipelineExecutionOutput) String() string
String returns the string representation
type ThirdPartyJob ¶
type ThirdPartyJob struct { // The clientToken portion of the clientId and clientToken pair used to verify // that the calling entity is allowed access to the job and its details. ClientId *string `locationName:"clientId" type:"string"` // The identifier used to identify the job in AWS CodePipeline. JobId *string `locationName:"jobId" type:"string"` // contains filtered or unexported fields }
A response to a PollForThirdPartyJobs request returned by AWS CodePipeline when there is a job to be worked upon by a partner action.
func (ThirdPartyJob) GoString ¶
func (s ThirdPartyJob) GoString() string
GoString returns the string representation
func (ThirdPartyJob) String ¶
func (s ThirdPartyJob) String() string
String returns the string representation
type ThirdPartyJobData ¶
type ThirdPartyJobData struct { // Represents information about an action configuration. ActionConfiguration *ActionConfiguration `locationName:"actionConfiguration" type:"structure"` // Represents information about an action type. ActionTypeId *ActionTypeId `locationName:"actionTypeId" type:"structure"` // Represents an AWS session credentials object. These credentials are temporary // credentials that are issued by AWS Secure Token Service (STS). They can be // used to access input and output artifacts in the Amazon S3 bucket used to // store artifact for the pipeline in AWS CodePipeline. ArtifactCredentials *AWSSessionCredentials `locationName:"artifactCredentials" type:"structure"` // A system-generated token, such as a AWS CodeDeploy deployment ID, that a // job requires in order to continue the job asynchronously. ContinuationToken *string `locationName:"continuationToken" type:"string"` // The encryption key used to encrypt and decrypt data in the artifact store // for the pipeline, such as an AWS Key Management Service (AWS KMS) key. This // is optional and might not be present. EncryptionKey *EncryptionKey `locationName:"encryptionKey" type:"structure"` // The name of the artifact that will be worked upon by the action, if any. // This name might be system-generated, such as "MyApp", or might be defined // by the user when the action is created. The input artifact name must match // the name of an output artifact generated by an action in an earlier action // or stage of the pipeline. InputArtifacts []*Artifact `locationName:"inputArtifacts" type:"list"` // The name of the artifact that will be the result of the action, if any. This // name might be system-generated, such as "MyBuiltApp", or might be defined // by the user when the action is created. OutputArtifacts []*Artifact `locationName:"outputArtifacts" type:"list"` // Represents information about a pipeline to a job worker. PipelineContext *PipelineContext `locationName:"pipelineContext" type:"structure"` // contains filtered or unexported fields }
Represents information about the job data for a partner action.
func (ThirdPartyJobData) GoString ¶
func (s ThirdPartyJobData) GoString() string
GoString returns the string representation
func (ThirdPartyJobData) String ¶
func (s ThirdPartyJobData) String() string
String returns the string representation
type ThirdPartyJobDetails ¶
type ThirdPartyJobDetails struct { // The data to be returned by the third party job worker. Data *ThirdPartyJobData `locationName:"data" type:"structure"` // The identifier used to identify the job details in AWS CodePipeline. Id *string `locationName:"id" min:"1" type:"string"` // A system-generated random number that AWS CodePipeline uses to ensure that // the job is being worked on by only one job worker. This number must be returned // in the response. Nonce *string `locationName:"nonce" type:"string"` // contains filtered or unexported fields }
The details of a job sent in response to a GetThirdPartyJobDetails request.
func (ThirdPartyJobDetails) GoString ¶
func (s ThirdPartyJobDetails) GoString() string
GoString returns the string representation
func (ThirdPartyJobDetails) String ¶
func (s ThirdPartyJobDetails) String() string
String returns the string representation
type TransitionState ¶
type TransitionState struct { // The user-specified reason why the transition between two stages of a pipeline // was disabled. DisabledReason *string `locationName:"disabledReason" min:"1" type:"string"` // Whether the transition between stages is enabled (true) or disabled (false). Enabled *bool `locationName:"enabled" type:"boolean"` // The timestamp when the transition state was last changed. LastChangedAt *time.Time `locationName:"lastChangedAt" type:"timestamp" timestampFormat:"unix"` // The ID of the user who last changed the transition state. LastChangedBy *string `locationName:"lastChangedBy" type:"string"` // contains filtered or unexported fields }
Represents information about the state of transitions between one stage and another stage.
func (TransitionState) GoString ¶
func (s TransitionState) GoString() string
GoString returns the string representation
func (TransitionState) String ¶
func (s TransitionState) String() string
String returns the string representation
type UpdatePipelineInput ¶
type UpdatePipelineInput struct { // The name of the pipeline to be updated. Pipeline *PipelineDeclaration `locationName:"pipeline" type:"structure" required:"true"` // contains filtered or unexported fields }
Represents the input of an update pipeline action.
func (UpdatePipelineInput) GoString ¶
func (s UpdatePipelineInput) GoString() string
GoString returns the string representation
func (UpdatePipelineInput) String ¶
func (s UpdatePipelineInput) String() string
String returns the string representation
func (*UpdatePipelineInput) Validate ¶ added in v1.1.21
func (s *UpdatePipelineInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdatePipelineOutput ¶
type UpdatePipelineOutput struct { // The structure of the updated pipeline. Pipeline *PipelineDeclaration `locationName:"pipeline" type:"structure"` // contains filtered or unexported fields }
Represents the output of an update pipeline action.
func (UpdatePipelineOutput) GoString ¶
func (s UpdatePipelineOutput) GoString() string
GoString returns the string representation
func (UpdatePipelineOutput) String ¶
func (s UpdatePipelineOutput) String() string
String returns the string representation
Directories ¶
Path | Synopsis |
---|---|
Package codepipelineiface provides an interface for the AWS CodePipeline.
|
Package codepipelineiface provides an interface for the AWS CodePipeline. |