qmp

package
v0.0.0-...-4df9163 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 20, 2024 License: AGPL-3.0 Imports: 13 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var ErrMonitorBadConsole = fmt.Errorf("Requested console couldn't be found")

ErrMonitorBadConsole is retuned when the requested console doesn't exist.

View Source 
var ErrMonitorDisconnect = fmt.Errorf("Monitor is disconnected")

ErrMonitorDisconnect is returned when interacting with a disconnected Monitor.

View Source 
var EventAgentStarted = "LXD-AGENT-STARTED"

EventAgentStarted is the event sent once the lxd-agent has started.

View Source 
var EventVMShutdown = "SHUTDOWN"

EventVMShutdown is the event sent when VM guest shuts down.

View Source 
var EventVMShutdownReasonDisconnect = "disconnect"

EventVMShutdownReasonDisconnect is used as the reason when the shutdown event is triggered by a QMP disconnect.

View Source 
var RingbufSize = 16

RingbufSize is the size of the agent serial ringbuffer in bytes.

Functions

This section is empty.

Types

type AMDSEVCapabilities 

type AMDSEVCapabilities struct {
	PDH             string `json:"pdh"`               // Platform Diffie-Hellman key (base64-encoded)
	CertChain       string `json:"cert-chain"`        // PDH certificate chain (base64-encoded)
	CPU0Id          string `json:"cpu0-id"`           // Unique ID of CPU0 (base64-encoded)
	CBitPos         int    `json:"cbitpos"`           // C-bit location in page table entry
	ReducedPhysBits int    `json:"reduced-phys-bits"` // Number of physical address bit reduction when SEV is enabled
}

AMDSEVCapabilities represents the SEV capabilities of QEMU.

type AddFdInfo 

type AddFdInfo struct {
	ID int `json:"fdset-id"`
	FD int `json:"fd"`
}

AddFdInfo contains information about a file descriptor that was added to an fd set.

type BlockStats 

type BlockStats struct {
	BytesWritten    int `json:"wr_bytes"`
	WritesCompleted int `json:"wr_operations"`
	BytesRead       int `json:"rd_bytes"`
	ReadsCompleted  int `json:"rd_operations"`
}

BlockStats represents block device stats.

type CPU 

type CPU struct {
	Index    int    `json:"cpu-index,omitempty"`
	QOMPath  string `json:"qom-path,omitempty"`
	ThreadID int    `json:"thread-id,omitempty"`
	Target   string `json:"target,omitempty"`

	Props CPUInstanceProperties `json:"props"`
}

CPU contains information about a CPU.

type CPUInstanceProperties 

type CPUInstanceProperties struct {
	NodeID    int `json:"node-id,omitempty"`
	SocketID  int `json:"socket-id,omitempty"`
	DieID     int `json:"die-id,omitempty"`
	ClusterID int `json:"cluster-id,omitempty"`
	CoreID    int `json:"core-id,omitempty"`
	ThreadID  int `json:"thread-id,omitempty"`
}

CPUInstanceProperties contains CPU instance properties.

type FdsetFdInfo 

type FdsetFdInfo struct {
	FD     int    `json:"fd"`
	Opaque string `json:"opaque"`
}

FdsetFdInfo contains information about a file descriptor that belongs to an FD set.

type FdsetInfo 

type FdsetInfo struct {
	ID  int           `json:"fdset-id"`
	FDs []FdsetFdInfo `json:"fds"`
}

FdsetInfo contains information about an FD set.

type HotpluggableCPU 

type HotpluggableCPU struct {
	Type       string `json:"type"`
	VCPUsCount int    `json:"vcpus-count"`
	QOMPath    string `json:"qom-path,omitempty"`

	Props CPUInstanceProperties `json:"props"`
}

HotpluggableCPU contains information about a hotpluggable CPU.

type Monitor 

type Monitor struct {
	// contains filtered or unexported fields
}

Monitor represents a QMP monitor.

func Connect 

func Connect(path string, serialCharDev string, eventHandler func(name string, data map[string]any)) (*Monitor, error)

Connect creates or retrieves an existing QMP monitor for the path.

func (*Monitor) AddBlockDevice 

func (m *Monitor) AddBlockDevice(blockDev map[string]any, device map[string]string) error

AddBlockDevice adds a block device.

func (*Monitor) AddCharDevice 

func (m *Monitor) AddCharDevice(device map[string]any) error

AddCharDevice adds a new character device.

func (*Monitor) AddDevice 

func (m *Monitor) AddDevice(device map[string]string) error

AddDevice adds a new device.

func (*Monitor) AddNIC 

func (m *Monitor) AddNIC(netDev map[string]any, device map[string]string) error

AddNIC adds a NIC device.

func (*Monitor) AddSecret 

func (m *Monitor) AddSecret(id string, secret string) error

AddSecret adds a secret object with the given ID and secret. This function won't return an error if the secret object already exists.

func (*Monitor) AgenStarted 

func (m *Monitor) AgenStarted() bool

AgenStarted indicates whether an agent has been detected.

func (*Monitor) BlockCommit 

func (m *Monitor) BlockCommit(deviceNodeName string) error

BlockCommit merges a snapshot device back into its parent device.

func (*Monitor) BlockDevMirror 

func (m *Monitor) BlockDevMirror(deviceNodeName string, targetNodeName string) error

BlockDevMirror mirrors the top device to the target device.

func (*Monitor) BlockDevSnapshot 

func (m *Monitor) BlockDevSnapshot(deviceNodeName string, snapshotNodeName string) error

BlockDevSnapshot creates a snapshot of a device using the specified snapshot device.

func (*Monitor) BlockJobCancel 

func (m *Monitor) BlockJobCancel(deviceNodeName string) error

BlockJobCancel cancels an ongoing block job.

func (*Monitor) BlockJobComplete 

func (m *Monitor) BlockJobComplete(deviceNodeName string) error

BlockJobComplete completes a block job that is in reader state.

func (*Monitor) CloseFile 

func (m *Monitor) CloseFile(name string) error

CloseFile closes an existing file descriptor in the QMP fd table associated to name.

func (*Monitor) Disconnect 

func (m *Monitor) Disconnect()

Disconnect forces a disconnection from QEMU.

func (*Monitor) Eject 

func (m *Monitor) Eject(id string) error

Eject ejects a removable drive.

func (*Monitor) GetBlockStats 

func (m *Monitor) GetBlockStats() (map[string]BlockStats, error)

GetBlockStats return block device stats.

func (*Monitor) GetCPUs 

func (m *Monitor) GetCPUs() ([]int, error)

GetCPUs fetches the vCPU information for pinning.

func (*Monitor) GetMemoryBalloonSizeBytes 

func (m *Monitor) GetMemoryBalloonSizeBytes() (int64, error)

GetMemoryBalloonSizeBytes returns effective size of the memory in bytes (considering the current balloon size).

func (*Monitor) GetMemorySizeBytes 

func (m *Monitor) GetMemorySizeBytes() (int64, error)

GetMemorySizeBytes returns the current size of the base memory in bytes.

func (*Monitor) Migrate 

func (m *Monitor) Migrate(uri string) error

Migrate starts a migration stream.

func (*Monitor) MigrateContinue 

func (m *Monitor) MigrateContinue(fromState string) error

MigrateContinue continues a migration stream.

func (*Monitor) MigrateIncoming 

func (m *Monitor) MigrateIncoming(ctx context.Context, uri string) error

MigrateIncoming starts the receiver of a migration stream.

func (*Monitor) MigrateSetCapabilities 

func (m *Monitor) MigrateSetCapabilities(caps map[string]bool) error

MigrateSetCapabilities sets the capabilities used during migration.

func (*Monitor) MigrateWait 

func (m *Monitor) MigrateWait(state string) error

MigrateWait waits until migration job reaches the specified status. Returns nil if the migraton job reaches the specified status or an error if the migration job is in the failed status.

func (*Monitor) NBDBlockExportAdd 

func (m *Monitor) NBDBlockExportAdd(deviceNodeName string) error

NBDBlockExportAdd exports a writable device via the NBD server.

func (*Monitor) NBDServerStart 

func (m *Monitor) NBDServerStart() (net.Conn, error)

NBDServerStart starts internal NBD server and returns a connection to it.

func (*Monitor) NBDServerStop 

func (m *Monitor) NBDServerStop() error

NBDServerStop stops the internal NBD server.

func (*Monitor) Pause 

func (m *Monitor) Pause() error

Pause tells QEMU to temporarily stop the emulation.

func (*Monitor) Powerdown 

func (m *Monitor) Powerdown() error

Powerdown tells the VM to gracefully shutdown.

func (*Monitor) QueryCPUs 

func (m *Monitor) QueryCPUs() ([]CPU, error)

QueryCPUs returns a list of CPUs.

func (*Monitor) QueryHotpluggableCPUs 

func (m *Monitor) QueryHotpluggableCPUs() ([]HotpluggableCPU, error)

QueryHotpluggableCPUs returns a list of hotpluggable CPUs.

func (*Monitor) QueryPCI 

func (m *Monitor) QueryPCI() ([]PCIDevice, error)

QueryPCI returns info about PCI devices.

func (*Monitor) Quit 

func (m *Monitor) Quit() error

Quit tells QEMU to exit immediately.

func (*Monitor) RemoveBlockDevice 

func (m *Monitor) RemoveBlockDevice(blockDevName string) error

RemoveBlockDevice removes a block device.

func (*Monitor) RemoveCharDevice 

func (m *Monitor) RemoveCharDevice(deviceID string) error

RemoveCharDevice removes a character device.

func (*Monitor) RemoveDevice 

func (m *Monitor) RemoveDevice(deviceID string) error

RemoveDevice removes a device.

func (*Monitor) RemoveFDFromFDSet 

func (m *Monitor) RemoveFDFromFDSet(name string) error

RemoveFDFromFDSet removes an FD with the given name from an FD set.

func (*Monitor) RemoveNIC 

func (m *Monitor) RemoveNIC(netDevID string) error

RemoveNIC removes a NIC device.

func (*Monitor) Reset 

func (m *Monitor) Reset() error

Reset VM.

func (*Monitor) SEVCapabilities 

func (m *Monitor) SEVCapabilities() (AMDSEVCapabilities, error)

SEVCapabilities is used to get the SEV capabilities, and is supported on AMD X86 platforms only.

func (*Monitor) SendFile 

func (m *Monitor) SendFile(name string, file *os.File) error

SendFile adds a new file descriptor to the QMP fd table associated to name.

func (*Monitor) SendFileWithFDSet 

func (m *Monitor) SendFileWithFDSet(name string, file *os.File, readonly bool) (*AddFdInfo, error)

SendFileWithFDSet adds a new file descriptor to an FD set.

func (*Monitor) SetAction 

func (m *Monitor) SetAction(actions map[string]string) error

SetAction sets the actions the VM will take for certain scenarios.

func (*Monitor) SetBlockThrottle 

func (m *Monitor) SetBlockThrottle(id string, bytesRead int, bytesWrite int, iopsRead int, iopsWrite int) error

SetBlockThrottle applies an I/O limit on a disk.

func (*Monitor) SetMemoryBalloonSizeBytes 

func (m *Monitor) SetMemoryBalloonSizeBytes(sizeBytes int64) error

SetMemoryBalloonSizeBytes sets the size of the memory in bytes (which will resize the balloon as needed).

func (*Monitor) SetOnDisconnectEvent 

func (m *Monitor) SetOnDisconnectEvent(enable bool)

SetOnDisconnectEvent enables or disables the on disconnect event.

func (*Monitor) Start 

func (m *Monitor) Start() error

Start tells QEMU to start the emulation.

func (*Monitor) Status 

func (m *Monitor) Status() (string, error)

Status returns the current VM status.

func (*Monitor) Wait 

func (m *Monitor) Wait() (chan struct{}, error)

Wait returns a channel that will be closed on disconnection.

type PCIBridge 

type PCIBridge struct {
	Devices []PCIDevice `json:"devices"`
}

PCIBridge represents a PCI bridge.

type PCIClassInfo 

type PCIClassInfo struct {
	Class       int    `json:"class"`
	Description string `json:"desc"`
}

PCIClassInfo info about a device's class.

type PCIDevice 

type PCIDevice struct {
	DevID    string       `json:"qdev_id"`
	Bus      int          `json:"bus"`
	Slot     int          `json:"slot"`
	Function int          `json:"function"`
	Devices  []PCIDevice  `json:"devices"`
	Class    PCIClassInfo `json:"class_info"`
	Bridge   PCIBridge    `json:"pci_bridge"`
}

PCIDevice represents a PCI device.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.