Documentation
¶
Overview ¶
Package acm provides a client for AWS Certificate Manager.
Index ¶
- Constants
- type ACM
- func (c *ACM) AddTagsToCertificate(input *AddTagsToCertificateInput) (*AddTagsToCertificateOutput, error)
- func (c *ACM) AddTagsToCertificateRequest(input *AddTagsToCertificateInput) (req *request.Request, output *AddTagsToCertificateOutput)
- func (c *ACM) DeleteCertificate(input *DeleteCertificateInput) (*DeleteCertificateOutput, error)
- func (c *ACM) DeleteCertificateRequest(input *DeleteCertificateInput) (req *request.Request, output *DeleteCertificateOutput)
- func (c *ACM) DescribeCertificate(input *DescribeCertificateInput) (*DescribeCertificateOutput, error)
- func (c *ACM) DescribeCertificateRequest(input *DescribeCertificateInput) (req *request.Request, output *DescribeCertificateOutput)
- func (c *ACM) GetCertificate(input *GetCertificateInput) (*GetCertificateOutput, error)
- func (c *ACM) GetCertificateRequest(input *GetCertificateInput) (req *request.Request, output *GetCertificateOutput)
- func (c *ACM) ImportCertificate(input *ImportCertificateInput) (*ImportCertificateOutput, error)
- func (c *ACM) ImportCertificateRequest(input *ImportCertificateInput) (req *request.Request, output *ImportCertificateOutput)
- func (c *ACM) ListCertificates(input *ListCertificatesInput) (*ListCertificatesOutput, error)
- func (c *ACM) ListCertificatesPages(input *ListCertificatesInput, ...) error
- func (c *ACM) ListCertificatesRequest(input *ListCertificatesInput) (req *request.Request, output *ListCertificatesOutput)
- func (c *ACM) ListTagsForCertificate(input *ListTagsForCertificateInput) (*ListTagsForCertificateOutput, error)
- func (c *ACM) ListTagsForCertificateRequest(input *ListTagsForCertificateInput) (req *request.Request, output *ListTagsForCertificateOutput)
- func (c *ACM) RemoveTagsFromCertificate(input *RemoveTagsFromCertificateInput) (*RemoveTagsFromCertificateOutput, error)
- func (c *ACM) RemoveTagsFromCertificateRequest(input *RemoveTagsFromCertificateInput) (req *request.Request, output *RemoveTagsFromCertificateOutput)
- func (c *ACM) RequestCertificate(input *RequestCertificateInput) (*RequestCertificateOutput, error)
- func (c *ACM) RequestCertificateRequest(input *RequestCertificateInput) (req *request.Request, output *RequestCertificateOutput)
- func (c *ACM) ResendValidationEmail(input *ResendValidationEmailInput) (*ResendValidationEmailOutput, error)
- func (c *ACM) ResendValidationEmailRequest(input *ResendValidationEmailInput) (req *request.Request, output *ResendValidationEmailOutput)
- type AddTagsToCertificateInput
- func (s AddTagsToCertificateInput) GoString() string
- func (s *AddTagsToCertificateInput) SetCertificateArn(v string) *AddTagsToCertificateInput
- func (s *AddTagsToCertificateInput) SetTags(v []*Tag) *AddTagsToCertificateInput
- func (s AddTagsToCertificateInput) String() string
- func (s *AddTagsToCertificateInput) Validate() error
- type AddTagsToCertificateOutput
- type CertificateDetail
- func (s CertificateDetail) GoString() string
- func (s *CertificateDetail) SetCertificateArn(v string) *CertificateDetail
- func (s *CertificateDetail) SetCreatedAt(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetDomainName(v string) *CertificateDetail
- func (s *CertificateDetail) SetDomainValidationOptions(v []*DomainValidation) *CertificateDetail
- func (s *CertificateDetail) SetFailureReason(v string) *CertificateDetail
- func (s *CertificateDetail) SetImportedAt(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetInUseBy(v []*string) *CertificateDetail
- func (s *CertificateDetail) SetIssuedAt(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetIssuer(v string) *CertificateDetail
- func (s *CertificateDetail) SetKeyAlgorithm(v string) *CertificateDetail
- func (s *CertificateDetail) SetNotAfter(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetNotBefore(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetRevocationReason(v string) *CertificateDetail
- func (s *CertificateDetail) SetRevokedAt(v time.Time) *CertificateDetail
- func (s *CertificateDetail) SetSerial(v string) *CertificateDetail
- func (s *CertificateDetail) SetSignatureAlgorithm(v string) *CertificateDetail
- func (s *CertificateDetail) SetStatus(v string) *CertificateDetail
- func (s *CertificateDetail) SetSubject(v string) *CertificateDetail
- func (s *CertificateDetail) SetSubjectAlternativeNames(v []*string) *CertificateDetail
- func (s *CertificateDetail) SetType(v string) *CertificateDetail
- func (s CertificateDetail) String() string
- type CertificateSummary
- type DeleteCertificateInput
- type DeleteCertificateOutput
- type DescribeCertificateInput
- type DescribeCertificateOutput
- type DomainValidation
- func (s DomainValidation) GoString() string
- func (s *DomainValidation) SetDomainName(v string) *DomainValidation
- func (s *DomainValidation) SetValidationDomain(v string) *DomainValidation
- func (s *DomainValidation) SetValidationEmails(v []*string) *DomainValidation
- func (s DomainValidation) String() string
- type DomainValidationOption
- func (s DomainValidationOption) GoString() string
- func (s *DomainValidationOption) SetDomainName(v string) *DomainValidationOption
- func (s *DomainValidationOption) SetValidationDomain(v string) *DomainValidationOption
- func (s DomainValidationOption) String() string
- func (s *DomainValidationOption) Validate() error
- type GetCertificateInput
- type GetCertificateOutput
- type ImportCertificateInput
- func (s ImportCertificateInput) GoString() string
- func (s *ImportCertificateInput) SetCertificate(v []byte) *ImportCertificateInput
- func (s *ImportCertificateInput) SetCertificateArn(v string) *ImportCertificateInput
- func (s *ImportCertificateInput) SetCertificateChain(v []byte) *ImportCertificateInput
- func (s *ImportCertificateInput) SetPrivateKey(v []byte) *ImportCertificateInput
- func (s ImportCertificateInput) String() string
- func (s *ImportCertificateInput) Validate() error
- type ImportCertificateOutput
- type ListCertificatesInput
- func (s ListCertificatesInput) GoString() string
- func (s *ListCertificatesInput) SetCertificateStatuses(v []*string) *ListCertificatesInput
- func (s *ListCertificatesInput) SetMaxItems(v int64) *ListCertificatesInput
- func (s *ListCertificatesInput) SetNextToken(v string) *ListCertificatesInput
- func (s ListCertificatesInput) String() string
- func (s *ListCertificatesInput) Validate() error
- type ListCertificatesOutput
- type ListTagsForCertificateInput
- type ListTagsForCertificateOutput
- type RemoveTagsFromCertificateInput
- func (s RemoveTagsFromCertificateInput) GoString() string
- func (s *RemoveTagsFromCertificateInput) SetCertificateArn(v string) *RemoveTagsFromCertificateInput
- func (s *RemoveTagsFromCertificateInput) SetTags(v []*Tag) *RemoveTagsFromCertificateInput
- func (s RemoveTagsFromCertificateInput) String() string
- func (s *RemoveTagsFromCertificateInput) Validate() error
- type RemoveTagsFromCertificateOutput
- type RequestCertificateInput
- func (s RequestCertificateInput) GoString() string
- func (s *RequestCertificateInput) SetDomainName(v string) *RequestCertificateInput
- func (s *RequestCertificateInput) SetDomainValidationOptions(v []*DomainValidationOption) *RequestCertificateInput
- func (s *RequestCertificateInput) SetIdempotencyToken(v string) *RequestCertificateInput
- func (s *RequestCertificateInput) SetSubjectAlternativeNames(v []*string) *RequestCertificateInput
- func (s RequestCertificateInput) String() string
- func (s *RequestCertificateInput) Validate() error
- type RequestCertificateOutput
- type ResendValidationEmailInput
- func (s ResendValidationEmailInput) GoString() string
- func (s *ResendValidationEmailInput) SetCertificateArn(v string) *ResendValidationEmailInput
- func (s *ResendValidationEmailInput) SetDomain(v string) *ResendValidationEmailInput
- func (s *ResendValidationEmailInput) SetValidationDomain(v string) *ResendValidationEmailInput
- func (s ResendValidationEmailInput) String() string
- func (s *ResendValidationEmailInput) Validate() error
- type ResendValidationEmailOutput
- type Tag
Examples ¶
Constants ¶
const ( // CertificateStatusPendingValidation is a CertificateStatus enum value CertificateStatusPendingValidation = "PENDING_VALIDATION" // CertificateStatusIssued is a CertificateStatus enum value CertificateStatusIssued = "ISSUED" // CertificateStatusInactive is a CertificateStatus enum value CertificateStatusInactive = "INACTIVE" // CertificateStatusExpired is a CertificateStatus enum value CertificateStatusExpired = "EXPIRED" // CertificateStatusValidationTimedOut is a CertificateStatus enum value CertificateStatusValidationTimedOut = "VALIDATION_TIMED_OUT" // CertificateStatusRevoked is a CertificateStatus enum value CertificateStatusRevoked = "REVOKED" // CertificateStatusFailed is a CertificateStatus enum value CertificateStatusFailed = "FAILED" )
const ( // CertificateTypeImported is a CertificateType enum value CertificateTypeImported = "IMPORTED" // CertificateTypeAmazonIssued is a CertificateType enum value CertificateTypeAmazonIssued = "AMAZON_ISSUED" )
const ( // FailureReasonNoAvailableContacts is a FailureReason enum value FailureReasonNoAvailableContacts = "NO_AVAILABLE_CONTACTS" // FailureReasonAdditionalVerificationRequired is a FailureReason enum value FailureReasonAdditionalVerificationRequired = "ADDITIONAL_VERIFICATION_REQUIRED" // FailureReasonDomainNotAllowed is a FailureReason enum value FailureReasonDomainNotAllowed = "DOMAIN_NOT_ALLOWED" // FailureReasonInvalidPublicDomain is a FailureReason enum value FailureReasonInvalidPublicDomain = "INVALID_PUBLIC_DOMAIN" // FailureReasonOther is a FailureReason enum value FailureReasonOther = "OTHER" )
const ( // KeyAlgorithmRsa2048 is a KeyAlgorithm enum value KeyAlgorithmRsa2048 = "RSA_2048" // KeyAlgorithmRsa1024 is a KeyAlgorithm enum value KeyAlgorithmRsa1024 = "RSA_1024" // KeyAlgorithmEcPrime256v1 is a KeyAlgorithm enum value KeyAlgorithmEcPrime256v1 = "EC_prime256v1" )
const ( // RevocationReasonUnspecified is a RevocationReason enum value RevocationReasonUnspecified = "UNSPECIFIED" // RevocationReasonKeyCompromise is a RevocationReason enum value RevocationReasonKeyCompromise = "KEY_COMPROMISE" // RevocationReasonCaCompromise is a RevocationReason enum value RevocationReasonCaCompromise = "CA_COMPROMISE" // RevocationReasonAffiliationChanged is a RevocationReason enum value RevocationReasonAffiliationChanged = "AFFILIATION_CHANGED" // RevocationReasonSuperceded is a RevocationReason enum value RevocationReasonSuperceded = "SUPERCEDED" // RevocationReasonCessationOfOperation is a RevocationReason enum value RevocationReasonCessationOfOperation = "CESSATION_OF_OPERATION" // RevocationReasonCertificateHold is a RevocationReason enum value RevocationReasonCertificateHold = "CERTIFICATE_HOLD" // RevocationReasonRemoveFromCrl is a RevocationReason enum value RevocationReasonRemoveFromCrl = "REMOVE_FROM_CRL" // RevocationReasonPrivilegeWithdrawn is a RevocationReason enum value RevocationReasonPrivilegeWithdrawn = "PRIVILEGE_WITHDRAWN" // RevocationReasonAACompromise is a RevocationReason enum value RevocationReasonAACompromise = "A_A_COMPROMISE" )
const ServiceName = "acm"
A ServiceName is the name of the service the client will make API calls to.
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type ACM ¶
Welcome to the AWS Certificate Manager (ACM) API documentation.
You can use ACM to manage SSL/TLS certificates for your AWS-based websites and applications. For general information about using ACM, see the AWS Certificate Manager User Guide (http://docs.aws.amazon.com/acm/latest/userguide/). The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.
func New ¶
func New(p client.ConfigProvider, cfgs ...*aws.Config) *ACM
New creates a new instance of the ACM client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.
Example:
// Create a ACM client from just a session. svc := acm.New(mySession) // Create a ACM client with additional configuration svc := acm.New(mySession, aws.NewConfig().WithRegion("us-west-2"))
func (*ACM) AddTagsToCertificate ¶ added in v1.1.20
func (c *ACM) AddTagsToCertificate(input *AddTagsToCertificateInput) (*AddTagsToCertificateOutput, error)
AddTagsToCertificate API operation for AWS Certificate Manager.
Adds one or more tags to an ACM Certificate. Tags are labels that you can use to identify and organize your AWS resources. Each tag consists of a key and an optional value. You specify the certificate on input by its Amazon Resource Name (ARN). You specify the tag by using a key-value pair.
You can apply a tag to just one certificate if you want to identify a specific characteristic of that certificate, or you can apply the same tag to multiple certificates if you want to filter for a common relationship among those certificates. Similarly, you can apply the same tag to multiple resources if you want to specify a relationship among those resources. For example, you can add the same tag to an ACM Certificate and an Elastic Load Balancing load balancer to indicate that they are both used by the same website. For more information, see Tagging ACM Certificates (http://docs.aws.amazon.com/acm/latest/userguide/tags.html).
To remove one or more tags, use the RemoveTagsFromCertificate action. To view all of the tags that have been applied to the certificate, use the ListTagsForCertificate action.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation AddTagsToCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
InvalidTagException One or both of the values that make up the key-value pair is not valid. For example, you cannot specify a tag value that begins with aws:.
TooManyTagsException The request contains too many tags. Try the request again with fewer tags.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.AddTagsToCertificateInput{ CertificateArn: aws.String("Arn"), // Required Tags: []*acm.Tag{ // Required { // Required Key: aws.String("TagKey"), // Required Value: aws.String("TagValue"), }, // More values... }, } resp, err := svc.AddTagsToCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) AddTagsToCertificateRequest ¶ added in v1.1.20
func (c *ACM) AddTagsToCertificateRequest(input *AddTagsToCertificateInput) (req *request.Request, output *AddTagsToCertificateOutput)
AddTagsToCertificateRequest generates a "aws/request.Request" representing the client's request for the AddTagsToCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AddTagsToCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddTagsToCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AddTagsToCertificateRequest method. req, resp := client.AddTagsToCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) DeleteCertificate ¶
func (c *ACM) DeleteCertificate(input *DeleteCertificateInput) (*DeleteCertificateOutput, error)
DeleteCertificate API operation for AWS Certificate Manager.
Deletes an ACM Certificate and its associated private key. If this action succeeds, the certificate no longer appears in the list of ACM Certificates that can be displayed by calling the ListCertificates action or be retrieved by calling the GetCertificate action. The certificate will not be available for use by other AWS services.
You cannot delete an ACM Certificate that is being used by another AWS service. To delete a certificate that is in use, the certificate association must first be removed.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation DeleteCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
ResourceInUseException The certificate is in use by another AWS service in the caller's account. Remove the association and try again.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.DeleteCertificateInput{ CertificateArn: aws.String("Arn"), // Required } resp, err := svc.DeleteCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) DeleteCertificateRequest ¶
func (c *ACM) DeleteCertificateRequest(input *DeleteCertificateInput) (req *request.Request, output *DeleteCertificateOutput)
DeleteCertificateRequest generates a "aws/request.Request" representing the client's request for the DeleteCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DeleteCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteCertificateRequest method. req, resp := client.DeleteCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) DescribeCertificate ¶
func (c *ACM) DescribeCertificate(input *DescribeCertificateInput) (*DescribeCertificateOutput, error)
DescribeCertificate API operation for AWS Certificate Manager.
Returns a list of the fields contained in the specified ACM Certificate. For example, this action returns the certificate status, a flag that indicates whether the certificate is associated with any other AWS service, and the date at which the certificate request was created. You specify the ACM Certificate on input by its Amazon Resource Name (ARN).
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation DescribeCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.DescribeCertificateInput{ CertificateArn: aws.String("Arn"), // Required } resp, err := svc.DescribeCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) DescribeCertificateRequest ¶
func (c *ACM) DescribeCertificateRequest(input *DescribeCertificateInput) (req *request.Request, output *DescribeCertificateOutput)
DescribeCertificateRequest generates a "aws/request.Request" representing the client's request for the DescribeCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeCertificateRequest method. req, resp := client.DescribeCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) GetCertificate ¶
func (c *ACM) GetCertificate(input *GetCertificateInput) (*GetCertificateOutput, error)
GetCertificate API operation for AWS Certificate Manager.
Retrieves an ACM Certificate and certificate chain for the certificate specified by an ARN. The chain is an ordered list of certificates that contains the root certificate, intermediate certificates of subordinate CAs, and the ACM Certificate. The certificate and certificate chain are base64 encoded. If you want to decode the certificate chain to see the individual certificate fields, you can use OpenSSL.
Currently, ACM Certificates can be used only with Elastic Load Balancing and Amazon CloudFront.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation GetCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
RequestInProgressException The certificate request is in process and the certificate in your account has not yet been issued.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.GetCertificateInput{ CertificateArn: aws.String("Arn"), // Required } resp, err := svc.GetCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) GetCertificateRequest ¶
func (c *ACM) GetCertificateRequest(input *GetCertificateInput) (req *request.Request, output *GetCertificateOutput)
GetCertificateRequest generates a "aws/request.Request" representing the client's request for the GetCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See GetCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetCertificateRequest method. req, resp := client.GetCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) ImportCertificate ¶ added in v1.4.18
func (c *ACM) ImportCertificate(input *ImportCertificateInput) (*ImportCertificateOutput, error)
ImportCertificate API operation for AWS Certificate Manager.
Imports an SSL/TLS certificate into AWS Certificate Manager (ACM) to use with ACM's integrated AWS services (http://docs.aws.amazon.com/acm/latest/userguide/acm-services.html).
ACM does not provide managed renewal (http://docs.aws.amazon.com/acm/latest/userguide/acm-renewal.html) for certificates that you import.
For more information about importing certificates into ACM, including the differences between certificates that you import and those that ACM provides, see Importing Certificates (http://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html) in the AWS Certificate Manager User Guide.
To import a certificate, you must provide the certificate and the matching private key. When the certificate is not self-signed, you must also provide a certificate chain. You can omit the certificate chain when importing a self-signed certificate.
The certificate, private key, and certificate chain must be PEM-encoded. For more information about converting these items to PEM format, see Importing Certificates Troubleshooting (http://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html#import-certificate-troubleshooting) in the AWS Certificate Manager User Guide.
To import a new certificate, omit the CertificateArn field. Include this field only when you want to replace a previously imported certificate.
This operation returns the Amazon Resource Name (ARN) (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) of the imported certificate.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation ImportCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
LimitExceededException An ACM limit has been exceeded. For example, you may have input more domains than are allowed or you've requested too many certificates for your account. See the exception message returned by ACM to determine which limit you have violated. For more information about ACM limits, see the Limits (http://docs.aws.amazon.com/acm/latest/userguide/acm-limits.html) topic.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.ImportCertificateInput{ Certificate: []byte("PAYLOAD"), // Required PrivateKey: []byte("PAYLOAD"), // Required CertificateArn: aws.String("Arn"), CertificateChain: []byte("PAYLOAD"), } resp, err := svc.ImportCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) ImportCertificateRequest ¶ added in v1.4.18
func (c *ACM) ImportCertificateRequest(input *ImportCertificateInput) (req *request.Request, output *ImportCertificateOutput)
ImportCertificateRequest generates a "aws/request.Request" representing the client's request for the ImportCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ImportCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ImportCertificateRequest method. req, resp := client.ImportCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) ListCertificates ¶
func (c *ACM) ListCertificates(input *ListCertificatesInput) (*ListCertificatesOutput, error)
ListCertificates API operation for AWS Certificate Manager.
Retrieves a list of ACM Certificates and the domain name for each. You can optionally filter the list to return only the certificates that match the specified status.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation ListCertificates for usage and error information.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.ListCertificatesInput{ CertificateStatuses: []*string{ aws.String("CertificateStatus"), // Required // More values... }, MaxItems: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.ListCertificates(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) ListCertificatesPages ¶
func (c *ACM) ListCertificatesPages(input *ListCertificatesInput, fn func(p *ListCertificatesOutput, lastPage bool) (shouldContinue bool)) error
ListCertificatesPages iterates over the pages of a ListCertificates operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListCertificates method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListCertificates operation. pageNum := 0 err := client.ListCertificatesPages(params, func(page *ListCertificatesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*ACM) ListCertificatesRequest ¶
func (c *ACM) ListCertificatesRequest(input *ListCertificatesInput) (req *request.Request, output *ListCertificatesOutput)
ListCertificatesRequest generates a "aws/request.Request" representing the client's request for the ListCertificates operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListCertificates for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListCertificates method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListCertificatesRequest method. req, resp := client.ListCertificatesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) ListTagsForCertificate ¶ added in v1.1.20
func (c *ACM) ListTagsForCertificate(input *ListTagsForCertificateInput) (*ListTagsForCertificateOutput, error)
ListTagsForCertificate API operation for AWS Certificate Manager.
Lists the tags that have been applied to the ACM Certificate. Use the certificate ARN to specify the certificate. To add a tag to an ACM Certificate, use the AddTagsToCertificate action. To delete a tag, use the RemoveTagsFromCertificate action.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation ListTagsForCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.ListTagsForCertificateInput{ CertificateArn: aws.String("Arn"), // Required } resp, err := svc.ListTagsForCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) ListTagsForCertificateRequest ¶ added in v1.1.20
func (c *ACM) ListTagsForCertificateRequest(input *ListTagsForCertificateInput) (req *request.Request, output *ListTagsForCertificateOutput)
ListTagsForCertificateRequest generates a "aws/request.Request" representing the client's request for the ListTagsForCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ListTagsForCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListTagsForCertificateRequest method. req, resp := client.ListTagsForCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) RemoveTagsFromCertificate ¶ added in v1.1.20
func (c *ACM) RemoveTagsFromCertificate(input *RemoveTagsFromCertificateInput) (*RemoveTagsFromCertificateOutput, error)
RemoveTagsFromCertificate API operation for AWS Certificate Manager.
Remove one or more tags from an ACM Certificate. A tag consists of a key-value pair. If you do not specify the value portion of the tag when calling this function, the tag will be removed regardless of value. If you specify a value, the tag is removed only if it is associated with the specified value.
To add tags to a certificate, use the AddTagsToCertificate action. To view all of the tags that have been applied to a specific ACM Certificate, use the ListTagsForCertificate action.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation RemoveTagsFromCertificate for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
InvalidTagException One or both of the values that make up the key-value pair is not valid. For example, you cannot specify a tag value that begins with aws:.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.RemoveTagsFromCertificateInput{ CertificateArn: aws.String("Arn"), // Required Tags: []*acm.Tag{ // Required { // Required Key: aws.String("TagKey"), // Required Value: aws.String("TagValue"), }, // More values... }, } resp, err := svc.RemoveTagsFromCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) RemoveTagsFromCertificateRequest ¶ added in v1.1.20
func (c *ACM) RemoveTagsFromCertificateRequest(input *RemoveTagsFromCertificateInput) (req *request.Request, output *RemoveTagsFromCertificateOutput)
RemoveTagsFromCertificateRequest generates a "aws/request.Request" representing the client's request for the RemoveTagsFromCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See RemoveTagsFromCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RemoveTagsFromCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RemoveTagsFromCertificateRequest method. req, resp := client.RemoveTagsFromCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) RequestCertificate ¶
func (c *ACM) RequestCertificate(input *RequestCertificateInput) (*RequestCertificateOutput, error)
RequestCertificate API operation for AWS Certificate Manager.
Requests an ACM Certificate for use with other AWS services. To request an ACM Certificate, you must specify the fully qualified domain name (FQDN) for your site. You can also specify additional FQDNs if users can reach your site by using other names. For each domain name you specify, email is sent to the domain owner to request approval to issue the certificate. After receiving approval from the domain owner, the ACM Certificate is issued. For more information, see the AWS Certificate Manager User Guide (http://docs.aws.amazon.com/acm/latest/userguide/).
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation RequestCertificate for usage and error information.
Returned Error Codes:
LimitExceededException An ACM limit has been exceeded. For example, you may have input more domains than are allowed or you've requested too many certificates for your account. See the exception message returned by ACM to determine which limit you have violated. For more information about ACM limits, see the Limits (http://docs.aws.amazon.com/acm/latest/userguide/acm-limits.html) topic.
InvalidDomainValidationOptionsException One or more values in the DomainValidationOption structure is incorrect.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.RequestCertificateInput{ DomainName: aws.String("DomainNameString"), // Required DomainValidationOptions: []*acm.DomainValidationOption{ { // Required DomainName: aws.String("DomainNameString"), // Required ValidationDomain: aws.String("DomainNameString"), // Required }, // More values... }, IdempotencyToken: aws.String("IdempotencyToken"), SubjectAlternativeNames: []*string{ aws.String("DomainNameString"), // Required // More values... }, } resp, err := svc.RequestCertificate(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) RequestCertificateRequest ¶
func (c *ACM) RequestCertificateRequest(input *RequestCertificateInput) (req *request.Request, output *RequestCertificateOutput)
RequestCertificateRequest generates a "aws/request.Request" representing the client's request for the RequestCertificate operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See RequestCertificate for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RequestCertificate method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RequestCertificateRequest method. req, resp := client.RequestCertificateRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*ACM) ResendValidationEmail ¶
func (c *ACM) ResendValidationEmail(input *ResendValidationEmailInput) (*ResendValidationEmailOutput, error)
ResendValidationEmail API operation for AWS Certificate Manager.
Resends the email that requests domain ownership validation. The domain owner or an authorized representative must approve the ACM Certificate before it can be issued. The certificate can be approved by clicking a link in the mail to navigate to the Amazon certificate approval website and then clicking I Approve. However, the validation email can be blocked by spam filters. Therefore, if you do not receive the original mail, you can request that the mail be resent within 72 hours of requesting the ACM Certificate. If more than 72 hours have elapsed since your original request or since your last attempt to resend validation mail, you must request a new certificate.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Certificate Manager's API operation ResendValidationEmail for usage and error information.
Returned Error Codes:
ResourceNotFoundException The specified certificate cannot be found in the caller's account, or the caller's account cannot be found.
InvalidStateException Processing has reached an invalid state. For example, this exception can occur if the specified domain is not using email validation, or the current certificate status does not permit the requested operation. See the exception message returned by ACM to determine which state is not valid.
InvalidArnException The requested Amazon Resource Name (ARN) does not refer to an existing resource.
InvalidDomainValidationOptionsException One or more values in the DomainValidationOption structure is incorrect.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/acm" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := acm.New(sess) params := &acm.ResendValidationEmailInput{ CertificateArn: aws.String("Arn"), // Required Domain: aws.String("DomainNameString"), // Required ValidationDomain: aws.String("DomainNameString"), // Required } resp, err := svc.ResendValidationEmail(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*ACM) ResendValidationEmailRequest ¶
func (c *ACM) ResendValidationEmailRequest(input *ResendValidationEmailInput) (req *request.Request, output *ResendValidationEmailOutput)
ResendValidationEmailRequest generates a "aws/request.Request" representing the client's request for the ResendValidationEmail operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ResendValidationEmail for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResendValidationEmail method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ResendValidationEmailRequest method. req, resp := client.ResendValidationEmailRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
type AddTagsToCertificateInput ¶ added in v1.1.20
type AddTagsToCertificateInput struct { // String that contains the ARN of the ACM Certificate to which the tag is to // be applied. This must be of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // The key-value pair that defines the tag. The tag value is optional. // // Tags is a required field Tags []*Tag `min:"1" type:"list" required:"true"` // contains filtered or unexported fields }
func (AddTagsToCertificateInput) GoString ¶ added in v1.1.20
func (s AddTagsToCertificateInput) GoString() string
GoString returns the string representation
func (*AddTagsToCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *AddTagsToCertificateInput) SetCertificateArn(v string) *AddTagsToCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (*AddTagsToCertificateInput) SetTags ¶ added in v1.5.0
func (s *AddTagsToCertificateInput) SetTags(v []*Tag) *AddTagsToCertificateInput
SetTags sets the Tags field's value.
func (AddTagsToCertificateInput) String ¶ added in v1.1.20
func (s AddTagsToCertificateInput) String() string
String returns the string representation
func (*AddTagsToCertificateInput) Validate ¶ added in v1.1.21
func (s *AddTagsToCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AddTagsToCertificateOutput ¶ added in v1.1.20
type AddTagsToCertificateOutput struct {
// contains filtered or unexported fields
}
func (AddTagsToCertificateOutput) GoString ¶ added in v1.1.20
func (s AddTagsToCertificateOutput) GoString() string
GoString returns the string representation
func (AddTagsToCertificateOutput) String ¶ added in v1.1.20
func (s AddTagsToCertificateOutput) String() string
String returns the string representation
type CertificateDetail ¶
type CertificateDetail struct { // The Amazon Resource Name (ARN) of the certificate. For more information about // ARNs, see Amazon Resource Names (ARNs) and AWS Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) // in the AWS General Reference. CertificateArn *string `min:"20" type:"string"` // The time at which the certificate was requested. This value exists only when // the certificate type is AMAZON_ISSUED. CreatedAt *time.Time `type:"timestamp" timestampFormat:"unix"` // The fully qualified domain name for the certificate, such as www.example.com // or example.com. DomainName *string `min:"1" type:"string"` // Contains information about the email address or addresses used for domain // validation. This field exists only when the certificate type is AMAZON_ISSUED. DomainValidationOptions []*DomainValidation `min:"1" type:"list"` // The reason the certificate request failed. This value exists only when the // certificate status is FAILED. For more information, see Certificate Request // Failed (http://docs.aws.amazon.com/acm/latest/userguide/troubleshooting.html#troubleshooting-failed) // in the AWS Certificate Manager User Guide. FailureReason *string `type:"string" enum:"FailureReason"` // The date and time at which the certificate was imported. This value exists // only when the certificate type is IMPORTED. ImportedAt *time.Time `type:"timestamp" timestampFormat:"unix"` // A list of ARNs for the AWS resources that are using the certificate. A certificate // can be used by multiple AWS resources. InUseBy []*string `type:"list"` // The time at which the certificate was issued. This value exists only when // the certificate type is AMAZON_ISSUED. IssuedAt *time.Time `type:"timestamp" timestampFormat:"unix"` // The name of the certificate authority that issued and signed the certificate. Issuer *string `type:"string"` // The algorithm that was used to generate the key pair (the public and private // key). KeyAlgorithm *string `type:"string" enum:"KeyAlgorithm"` // The time after which the certificate is not valid. NotAfter *time.Time `type:"timestamp" timestampFormat:"unix"` // The time before which the certificate is not valid. NotBefore *time.Time `type:"timestamp" timestampFormat:"unix"` // The reason the certificate was revoked. This value exists only when the certificate // status is REVOKED. RevocationReason *string `type:"string" enum:"RevocationReason"` // The time at which the certificate was revoked. This value exists only when // the certificate status is REVOKED. RevokedAt *time.Time `type:"timestamp" timestampFormat:"unix"` // The serial number of the certificate. Serial *string `type:"string"` // The algorithm that was used to sign the certificate. SignatureAlgorithm *string `type:"string"` // The status of the certificate. Status *string `type:"string" enum:"CertificateStatus"` // The name of the entity that is associated with the public key contained in // the certificate. Subject *string `type:"string"` // One or more domain names (subject alternative names) included in the certificate. // This list contains the domain names that are bound to the public key that // is contained in the certificate. The subject alternative names include the // canonical domain name (CN) of the certificate and additional domain names // that can be used to connect to the website. SubjectAlternativeNames []*string `min:"1" type:"list"` // The source of the certificate. For certificates provided by ACM, this value // is AMAZON_ISSUED. For certificates that you imported with ImportCertificate, // this value is IMPORTED. ACM does not provide managed renewal (http://docs.aws.amazon.com/acm/latest/userguide/acm-renewal.html) // for imported certificates. For more information about the differences between // certificates that you import and those that ACM provides, see Importing Certificates // (http://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html) // in the AWS Certificate Manager User Guide. Type *string `type:"string" enum:"CertificateType"` // contains filtered or unexported fields }
Contains detailed metadata about an ACM Certificate. This structure is returned in the response to a DescribeCertificate request.
func (CertificateDetail) GoString ¶
func (s CertificateDetail) GoString() string
GoString returns the string representation
func (*CertificateDetail) SetCertificateArn ¶ added in v1.5.0
func (s *CertificateDetail) SetCertificateArn(v string) *CertificateDetail
SetCertificateArn sets the CertificateArn field's value.
func (*CertificateDetail) SetCreatedAt ¶ added in v1.5.0
func (s *CertificateDetail) SetCreatedAt(v time.Time) *CertificateDetail
SetCreatedAt sets the CreatedAt field's value.
func (*CertificateDetail) SetDomainName ¶ added in v1.5.0
func (s *CertificateDetail) SetDomainName(v string) *CertificateDetail
SetDomainName sets the DomainName field's value.
func (*CertificateDetail) SetDomainValidationOptions ¶ added in v1.5.0
func (s *CertificateDetail) SetDomainValidationOptions(v []*DomainValidation) *CertificateDetail
SetDomainValidationOptions sets the DomainValidationOptions field's value.
func (*CertificateDetail) SetFailureReason ¶ added in v1.5.0
func (s *CertificateDetail) SetFailureReason(v string) *CertificateDetail
SetFailureReason sets the FailureReason field's value.
func (*CertificateDetail) SetImportedAt ¶ added in v1.5.0
func (s *CertificateDetail) SetImportedAt(v time.Time) *CertificateDetail
SetImportedAt sets the ImportedAt field's value.
func (*CertificateDetail) SetInUseBy ¶ added in v1.5.0
func (s *CertificateDetail) SetInUseBy(v []*string) *CertificateDetail
SetInUseBy sets the InUseBy field's value.
func (*CertificateDetail) SetIssuedAt ¶ added in v1.5.0
func (s *CertificateDetail) SetIssuedAt(v time.Time) *CertificateDetail
SetIssuedAt sets the IssuedAt field's value.
func (*CertificateDetail) SetIssuer ¶ added in v1.5.0
func (s *CertificateDetail) SetIssuer(v string) *CertificateDetail
SetIssuer sets the Issuer field's value.
func (*CertificateDetail) SetKeyAlgorithm ¶ added in v1.5.0
func (s *CertificateDetail) SetKeyAlgorithm(v string) *CertificateDetail
SetKeyAlgorithm sets the KeyAlgorithm field's value.
func (*CertificateDetail) SetNotAfter ¶ added in v1.5.0
func (s *CertificateDetail) SetNotAfter(v time.Time) *CertificateDetail
SetNotAfter sets the NotAfter field's value.
func (*CertificateDetail) SetNotBefore ¶ added in v1.5.0
func (s *CertificateDetail) SetNotBefore(v time.Time) *CertificateDetail
SetNotBefore sets the NotBefore field's value.
func (*CertificateDetail) SetRevocationReason ¶ added in v1.5.0
func (s *CertificateDetail) SetRevocationReason(v string) *CertificateDetail
SetRevocationReason sets the RevocationReason field's value.
func (*CertificateDetail) SetRevokedAt ¶ added in v1.5.0
func (s *CertificateDetail) SetRevokedAt(v time.Time) *CertificateDetail
SetRevokedAt sets the RevokedAt field's value.
func (*CertificateDetail) SetSerial ¶ added in v1.5.0
func (s *CertificateDetail) SetSerial(v string) *CertificateDetail
SetSerial sets the Serial field's value.
func (*CertificateDetail) SetSignatureAlgorithm ¶ added in v1.5.0
func (s *CertificateDetail) SetSignatureAlgorithm(v string) *CertificateDetail
SetSignatureAlgorithm sets the SignatureAlgorithm field's value.
func (*CertificateDetail) SetStatus ¶ added in v1.5.0
func (s *CertificateDetail) SetStatus(v string) *CertificateDetail
SetStatus sets the Status field's value.
func (*CertificateDetail) SetSubject ¶ added in v1.5.0
func (s *CertificateDetail) SetSubject(v string) *CertificateDetail
SetSubject sets the Subject field's value.
func (*CertificateDetail) SetSubjectAlternativeNames ¶ added in v1.5.0
func (s *CertificateDetail) SetSubjectAlternativeNames(v []*string) *CertificateDetail
SetSubjectAlternativeNames sets the SubjectAlternativeNames field's value.
func (*CertificateDetail) SetType ¶ added in v1.5.0
func (s *CertificateDetail) SetType(v string) *CertificateDetail
SetType sets the Type field's value.
func (CertificateDetail) String ¶
func (s CertificateDetail) String() string
String returns the string representation
type CertificateSummary ¶
type CertificateSummary struct { // Amazon Resource Name (ARN) of the certificate. This is of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). CertificateArn *string `min:"20" type:"string"` // Fully qualified domain name (FQDN), such as www.example.com or example.com, // for the certificate. DomainName *string `min:"1" type:"string"` // contains filtered or unexported fields }
This structure is returned in the response object of ListCertificates action.
func (CertificateSummary) GoString ¶
func (s CertificateSummary) GoString() string
GoString returns the string representation
func (*CertificateSummary) SetCertificateArn ¶ added in v1.5.0
func (s *CertificateSummary) SetCertificateArn(v string) *CertificateSummary
SetCertificateArn sets the CertificateArn field's value.
func (*CertificateSummary) SetDomainName ¶ added in v1.5.0
func (s *CertificateSummary) SetDomainName(v string) *CertificateSummary
SetDomainName sets the DomainName field's value.
func (CertificateSummary) String ¶
func (s CertificateSummary) String() string
String returns the string representation
type DeleteCertificateInput ¶
type DeleteCertificateInput struct { // String that contains the ARN of the ACM Certificate to be deleted. This must // be of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // contains filtered or unexported fields }
func (DeleteCertificateInput) GoString ¶
func (s DeleteCertificateInput) GoString() string
GoString returns the string representation
func (*DeleteCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *DeleteCertificateInput) SetCertificateArn(v string) *DeleteCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (DeleteCertificateInput) String ¶
func (s DeleteCertificateInput) String() string
String returns the string representation
func (*DeleteCertificateInput) Validate ¶ added in v1.1.21
func (s *DeleteCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteCertificateOutput ¶
type DeleteCertificateOutput struct {
// contains filtered or unexported fields
}
func (DeleteCertificateOutput) GoString ¶
func (s DeleteCertificateOutput) GoString() string
GoString returns the string representation
func (DeleteCertificateOutput) String ¶
func (s DeleteCertificateOutput) String() string
String returns the string representation
type DescribeCertificateInput ¶
type DescribeCertificateInput struct { // String that contains an ACM Certificate ARN. The ARN must be of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // contains filtered or unexported fields }
func (DescribeCertificateInput) GoString ¶
func (s DescribeCertificateInput) GoString() string
GoString returns the string representation
func (*DescribeCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *DescribeCertificateInput) SetCertificateArn(v string) *DescribeCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (DescribeCertificateInput) String ¶
func (s DescribeCertificateInput) String() string
String returns the string representation
func (*DescribeCertificateInput) Validate ¶ added in v1.1.21
func (s *DescribeCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeCertificateOutput ¶
type DescribeCertificateOutput struct { // Contains a CertificateDetail structure that lists the fields of an ACM Certificate. Certificate *CertificateDetail `type:"structure"` // contains filtered or unexported fields }
func (DescribeCertificateOutput) GoString ¶
func (s DescribeCertificateOutput) GoString() string
GoString returns the string representation
func (*DescribeCertificateOutput) SetCertificate ¶ added in v1.5.0
func (s *DescribeCertificateOutput) SetCertificate(v *CertificateDetail) *DescribeCertificateOutput
SetCertificate sets the Certificate field's value.
func (DescribeCertificateOutput) String ¶
func (s DescribeCertificateOutput) String() string
String returns the string representation
type DomainValidation ¶
type DomainValidation struct { // Fully Qualified Domain Name (FQDN) of the form www.example.com or example.com. // // DomainName is a required field DomainName *string `min:"1" type:"string" required:"true"` // The base validation domain that acts as the suffix of the email addresses // that are used to send the emails. ValidationDomain *string `min:"1" type:"string"` // A list of contact address for the domain registrant. ValidationEmails []*string `type:"list"` // contains filtered or unexported fields }
Structure that contains the domain name, the base validation domain to which validation email is sent, and the email addresses used to validate the domain identity.
func (DomainValidation) GoString ¶
func (s DomainValidation) GoString() string
GoString returns the string representation
func (*DomainValidation) SetDomainName ¶ added in v1.5.0
func (s *DomainValidation) SetDomainName(v string) *DomainValidation
SetDomainName sets the DomainName field's value.
func (*DomainValidation) SetValidationDomain ¶ added in v1.5.0
func (s *DomainValidation) SetValidationDomain(v string) *DomainValidation
SetValidationDomain sets the ValidationDomain field's value.
func (*DomainValidation) SetValidationEmails ¶ added in v1.5.0
func (s *DomainValidation) SetValidationEmails(v []*string) *DomainValidation
SetValidationEmails sets the ValidationEmails field's value.
func (DomainValidation) String ¶
func (s DomainValidation) String() string
String returns the string representation
type DomainValidationOption ¶
type DomainValidationOption struct { // Fully Qualified Domain Name (FQDN) of the certificate being requested. // // DomainName is a required field DomainName *string `min:"1" type:"string" required:"true"` // The domain to which validation email is sent. This is the base validation // domain that will act as the suffix of the email addresses. This must be the // same as the DomainName value or a superdomain of the DomainName value. For // example, if you requested a certificate for site.subdomain.example.com and // specify a ValidationDomain of subdomain.example.com, ACM sends email to the // domain registrant, technical contact, and administrative contact in WHOIS // for the base domain and the following five addresses: // // * admin@subdomain.example.com // // * administrator@subdomain.example.com // // * hostmaster@subdomain.example.com // // * postmaster@subdomain.example.com // // * webmaster@subdomain.example.com // // ValidationDomain is a required field ValidationDomain *string `min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
This structure is used in the request object of the RequestCertificate action.
func (DomainValidationOption) GoString ¶
func (s DomainValidationOption) GoString() string
GoString returns the string representation
func (*DomainValidationOption) SetDomainName ¶ added in v1.5.0
func (s *DomainValidationOption) SetDomainName(v string) *DomainValidationOption
SetDomainName sets the DomainName field's value.
func (*DomainValidationOption) SetValidationDomain ¶ added in v1.5.0
func (s *DomainValidationOption) SetValidationDomain(v string) *DomainValidationOption
SetValidationDomain sets the ValidationDomain field's value.
func (DomainValidationOption) String ¶
func (s DomainValidationOption) String() string
String returns the string representation
func (*DomainValidationOption) Validate ¶ added in v1.1.21
func (s *DomainValidationOption) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetCertificateInput ¶
type GetCertificateInput struct { // String that contains a certificate ARN in the following format: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // contains filtered or unexported fields }
func (GetCertificateInput) GoString ¶
func (s GetCertificateInput) GoString() string
GoString returns the string representation
func (*GetCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *GetCertificateInput) SetCertificateArn(v string) *GetCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (GetCertificateInput) String ¶
func (s GetCertificateInput) String() string
String returns the string representation
func (*GetCertificateInput) Validate ¶ added in v1.1.21
func (s *GetCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetCertificateOutput ¶
type GetCertificateOutput struct { // String that contains the ACM Certificate represented by the ARN specified // at input. Certificate *string `min:"1" type:"string"` // The certificate chain that contains the root certificate issued by the certificate // authority (CA). CertificateChain *string `min:"1" type:"string"` // contains filtered or unexported fields }
func (GetCertificateOutput) GoString ¶
func (s GetCertificateOutput) GoString() string
GoString returns the string representation
func (*GetCertificateOutput) SetCertificate ¶ added in v1.5.0
func (s *GetCertificateOutput) SetCertificate(v string) *GetCertificateOutput
SetCertificate sets the Certificate field's value.
func (*GetCertificateOutput) SetCertificateChain ¶ added in v1.5.0
func (s *GetCertificateOutput) SetCertificateChain(v string) *GetCertificateOutput
SetCertificateChain sets the CertificateChain field's value.
func (GetCertificateOutput) String ¶
func (s GetCertificateOutput) String() string
String returns the string representation
type ImportCertificateInput ¶ added in v1.4.18
type ImportCertificateInput struct { // The certificate to import. It must meet the following requirements: // // * Must be PEM-encoded. // // * Must contain a 1024-bit or 2048-bit RSA public key. // // * Must be valid at the time of import. You cannot import a certificate // before its validity period begins (the certificate's NotBefore date) or // after it expires (the certificate's NotAfter date). // // Certificate is automatically base64 encoded/decoded by the SDK. // // Certificate is a required field Certificate []byte `min:"1" type:"blob" required:"true"` // The Amazon Resource Name (ARN) (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) // of an imported certificate to replace. To import a new certificate, omit // this field. CertificateArn *string `min:"20" type:"string"` // The certificate chain. It must be PEM-encoded. // // CertificateChain is automatically base64 encoded/decoded by the SDK. CertificateChain []byte `min:"1" type:"blob"` // The private key that matches the public key in the certificate. It must meet // the following requirements: // // * Must be PEM-encoded. // // * Must be unencrypted. You cannot import a private key that is protected // by a password or passphrase. // // PrivateKey is automatically base64 encoded/decoded by the SDK. // // PrivateKey is a required field PrivateKey []byte `min:"1" type:"blob" required:"true"` // contains filtered or unexported fields }
func (ImportCertificateInput) GoString ¶ added in v1.4.18
func (s ImportCertificateInput) GoString() string
GoString returns the string representation
func (*ImportCertificateInput) SetCertificate ¶ added in v1.5.0
func (s *ImportCertificateInput) SetCertificate(v []byte) *ImportCertificateInput
SetCertificate sets the Certificate field's value.
func (*ImportCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *ImportCertificateInput) SetCertificateArn(v string) *ImportCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (*ImportCertificateInput) SetCertificateChain ¶ added in v1.5.0
func (s *ImportCertificateInput) SetCertificateChain(v []byte) *ImportCertificateInput
SetCertificateChain sets the CertificateChain field's value.
func (*ImportCertificateInput) SetPrivateKey ¶ added in v1.5.0
func (s *ImportCertificateInput) SetPrivateKey(v []byte) *ImportCertificateInput
SetPrivateKey sets the PrivateKey field's value.
func (ImportCertificateInput) String ¶ added in v1.4.18
func (s ImportCertificateInput) String() string
String returns the string representation
func (*ImportCertificateInput) Validate ¶ added in v1.4.18
func (s *ImportCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ImportCertificateOutput ¶ added in v1.4.18
type ImportCertificateOutput struct { // The Amazon Resource Name (ARN) (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) // of the imported certificate. CertificateArn *string `min:"20" type:"string"` // contains filtered or unexported fields }
func (ImportCertificateOutput) GoString ¶ added in v1.4.18
func (s ImportCertificateOutput) GoString() string
GoString returns the string representation
func (*ImportCertificateOutput) SetCertificateArn ¶ added in v1.5.0
func (s *ImportCertificateOutput) SetCertificateArn(v string) *ImportCertificateOutput
SetCertificateArn sets the CertificateArn field's value.
func (ImportCertificateOutput) String ¶ added in v1.4.18
func (s ImportCertificateOutput) String() string
String returns the string representation
type ListCertificatesInput ¶
type ListCertificatesInput struct { // The status or statuses on which to filter the list of ACM Certificates. CertificateStatuses []*string `type:"list"` // Use this parameter when paginating results to specify the maximum number // of items to return in the response. If additional items exist beyond the // number you specify, the NextToken element is sent in the response. Use this // NextToken value in a subsequent request to retrieve additional items. MaxItems *int64 `min:"1" type:"integer"` // Use this parameter only when paginating results and only in a subsequent // request after you receive a response with truncated results. Set it to the // value of NextToken from the response you just received. NextToken *string `min:"1" type:"string"` // contains filtered or unexported fields }
func (ListCertificatesInput) GoString ¶
func (s ListCertificatesInput) GoString() string
GoString returns the string representation
func (*ListCertificatesInput) SetCertificateStatuses ¶ added in v1.5.0
func (s *ListCertificatesInput) SetCertificateStatuses(v []*string) *ListCertificatesInput
SetCertificateStatuses sets the CertificateStatuses field's value.
func (*ListCertificatesInput) SetMaxItems ¶ added in v1.5.0
func (s *ListCertificatesInput) SetMaxItems(v int64) *ListCertificatesInput
SetMaxItems sets the MaxItems field's value.
func (*ListCertificatesInput) SetNextToken ¶ added in v1.5.0
func (s *ListCertificatesInput) SetNextToken(v string) *ListCertificatesInput
SetNextToken sets the NextToken field's value.
func (ListCertificatesInput) String ¶
func (s ListCertificatesInput) String() string
String returns the string representation
func (*ListCertificatesInput) Validate ¶ added in v1.1.21
func (s *ListCertificatesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListCertificatesOutput ¶
type ListCertificatesOutput struct { // A list of ACM Certificates. CertificateSummaryList []*CertificateSummary `type:"list"` // When the list is truncated, this value is present and contains the value // to use for the NextToken parameter in a subsequent pagination request. NextToken *string `min:"1" type:"string"` // contains filtered or unexported fields }
func (ListCertificatesOutput) GoString ¶
func (s ListCertificatesOutput) GoString() string
GoString returns the string representation
func (*ListCertificatesOutput) SetCertificateSummaryList ¶ added in v1.5.0
func (s *ListCertificatesOutput) SetCertificateSummaryList(v []*CertificateSummary) *ListCertificatesOutput
SetCertificateSummaryList sets the CertificateSummaryList field's value.
func (*ListCertificatesOutput) SetNextToken ¶ added in v1.5.0
func (s *ListCertificatesOutput) SetNextToken(v string) *ListCertificatesOutput
SetNextToken sets the NextToken field's value.
func (ListCertificatesOutput) String ¶
func (s ListCertificatesOutput) String() string
String returns the string representation
type ListTagsForCertificateInput ¶ added in v1.1.20
type ListTagsForCertificateInput struct { // String that contains the ARN of the ACM Certificate for which you want to // list the tags. This must be of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // contains filtered or unexported fields }
func (ListTagsForCertificateInput) GoString ¶ added in v1.1.20
func (s ListTagsForCertificateInput) GoString() string
GoString returns the string representation
func (*ListTagsForCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *ListTagsForCertificateInput) SetCertificateArn(v string) *ListTagsForCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (ListTagsForCertificateInput) String ¶ added in v1.1.20
func (s ListTagsForCertificateInput) String() string
String returns the string representation
func (*ListTagsForCertificateInput) Validate ¶ added in v1.1.21
func (s *ListTagsForCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListTagsForCertificateOutput ¶ added in v1.1.20
type ListTagsForCertificateOutput struct { // The key-value pairs that define the applied tags. Tags []*Tag `min:"1" type:"list"` // contains filtered or unexported fields }
func (ListTagsForCertificateOutput) GoString ¶ added in v1.1.20
func (s ListTagsForCertificateOutput) GoString() string
GoString returns the string representation
func (*ListTagsForCertificateOutput) SetTags ¶ added in v1.5.0
func (s *ListTagsForCertificateOutput) SetTags(v []*Tag) *ListTagsForCertificateOutput
SetTags sets the Tags field's value.
func (ListTagsForCertificateOutput) String ¶ added in v1.1.20
func (s ListTagsForCertificateOutput) String() string
String returns the string representation
type RemoveTagsFromCertificateInput ¶ added in v1.1.20
type RemoveTagsFromCertificateInput struct { // String that contains the ARN of the ACM Certificate with one or more tags // that you want to remove. This must be of the form: // // arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // For more information about ARNs, see Amazon Resource Names (ARNs) and AWS // Service Namespaces (http://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html). // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // The key-value pair that defines the tag to remove. // // Tags is a required field Tags []*Tag `min:"1" type:"list" required:"true"` // contains filtered or unexported fields }
func (RemoveTagsFromCertificateInput) GoString ¶ added in v1.1.20
func (s RemoveTagsFromCertificateInput) GoString() string
GoString returns the string representation
func (*RemoveTagsFromCertificateInput) SetCertificateArn ¶ added in v1.5.0
func (s *RemoveTagsFromCertificateInput) SetCertificateArn(v string) *RemoveTagsFromCertificateInput
SetCertificateArn sets the CertificateArn field's value.
func (*RemoveTagsFromCertificateInput) SetTags ¶ added in v1.5.0
func (s *RemoveTagsFromCertificateInput) SetTags(v []*Tag) *RemoveTagsFromCertificateInput
SetTags sets the Tags field's value.
func (RemoveTagsFromCertificateInput) String ¶ added in v1.1.20
func (s RemoveTagsFromCertificateInput) String() string
String returns the string representation
func (*RemoveTagsFromCertificateInput) Validate ¶ added in v1.1.21
func (s *RemoveTagsFromCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RemoveTagsFromCertificateOutput ¶ added in v1.1.20
type RemoveTagsFromCertificateOutput struct {
// contains filtered or unexported fields
}
func (RemoveTagsFromCertificateOutput) GoString ¶ added in v1.1.20
func (s RemoveTagsFromCertificateOutput) GoString() string
GoString returns the string representation
func (RemoveTagsFromCertificateOutput) String ¶ added in v1.1.20
func (s RemoveTagsFromCertificateOutput) String() string
String returns the string representation
type RequestCertificateInput ¶
type RequestCertificateInput struct { // Fully qualified domain name (FQDN), such as www.example.com, of the site // you want to secure with an ACM Certificate. Use an asterisk (*) to create // a wildcard certificate that protects several sites in the same domain. For // example, *.example.com protects www.example.com, site.example.com, and images.example.com. // // DomainName is a required field DomainName *string `min:"1" type:"string" required:"true"` // The base validation domain that will act as the suffix of the email addresses // that are used to send the emails. This must be the same as the Domain value // or a superdomain of the Domain value. For example, if you requested a certificate // for test.example.com and specify DomainValidationOptions of example.com, // ACM sends email to the domain registrant, technical contact, and administrative // contact in WHOIS and the following five addresses: // // * admin@example.com // // * administrator@example.com // // * hostmaster@example.com // // * postmaster@example.com // // * webmaster@example.com DomainValidationOptions []*DomainValidationOption `min:"1" type:"list"` // Customer chosen string that can be used to distinguish between calls to RequestCertificate. // Idempotency tokens time out after one hour. Therefore, if you call RequestCertificate // multiple times with the same idempotency token within one hour, ACM recognizes // that you are requesting only one certificate and will issue only one. If // you change the idempotency token for each call, ACM recognizes that you are // requesting multiple certificates. IdempotencyToken *string `min:"1" type:"string"` // Additional FQDNs to be included in the Subject Alternative Name extension // of the ACM Certificate. For example, add the name www.example.net to a certificate // for which the DomainName field is www.example.com if users can reach your // site by using either name. SubjectAlternativeNames []*string `min:"1" type:"list"` // contains filtered or unexported fields }
func (RequestCertificateInput) GoString ¶
func (s RequestCertificateInput) GoString() string
GoString returns the string representation
func (*RequestCertificateInput) SetDomainName ¶ added in v1.5.0
func (s *RequestCertificateInput) SetDomainName(v string) *RequestCertificateInput
SetDomainName sets the DomainName field's value.
func (*RequestCertificateInput) SetDomainValidationOptions ¶ added in v1.5.0
func (s *RequestCertificateInput) SetDomainValidationOptions(v []*DomainValidationOption) *RequestCertificateInput
SetDomainValidationOptions sets the DomainValidationOptions field's value.
func (*RequestCertificateInput) SetIdempotencyToken ¶ added in v1.5.0
func (s *RequestCertificateInput) SetIdempotencyToken(v string) *RequestCertificateInput
SetIdempotencyToken sets the IdempotencyToken field's value.
func (*RequestCertificateInput) SetSubjectAlternativeNames ¶ added in v1.5.0
func (s *RequestCertificateInput) SetSubjectAlternativeNames(v []*string) *RequestCertificateInput
SetSubjectAlternativeNames sets the SubjectAlternativeNames field's value.
func (RequestCertificateInput) String ¶
func (s RequestCertificateInput) String() string
String returns the string representation
func (*RequestCertificateInput) Validate ¶ added in v1.1.21
func (s *RequestCertificateInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RequestCertificateOutput ¶
type RequestCertificateOutput struct { // String that contains the ARN of the issued certificate. This must be of the // form: // // arn:aws:acm:us-east-1:123456789012:certificate/12345678-1234-1234-1234-123456789012 CertificateArn *string `min:"20" type:"string"` // contains filtered or unexported fields }
func (RequestCertificateOutput) GoString ¶
func (s RequestCertificateOutput) GoString() string
GoString returns the string representation
func (*RequestCertificateOutput) SetCertificateArn ¶ added in v1.5.0
func (s *RequestCertificateOutput) SetCertificateArn(v string) *RequestCertificateOutput
SetCertificateArn sets the CertificateArn field's value.
func (RequestCertificateOutput) String ¶
func (s RequestCertificateOutput) String() string
String returns the string representation
type ResendValidationEmailInput ¶
type ResendValidationEmailInput struct { // String that contains the ARN of the requested certificate. The certificate // ARN is generated and returned by the RequestCertificate action as soon as // the request is made. By default, using this parameter causes email to be // sent to all top-level domains you specified in the certificate request. // // The ARN must be of the form: // // arn:aws:acm:us-east-1:123456789012:certificate/12345678-1234-1234-1234-123456789012 // // CertificateArn is a required field CertificateArn *string `min:"20" type:"string" required:"true"` // The Fully Qualified Domain Name (FQDN) of the certificate that needs to be // validated. // // Domain is a required field Domain *string `min:"1" type:"string" required:"true"` // The base validation domain that will act as the suffix of the email addresses // that are used to send the emails. This must be the same as the Domain value // or a superdomain of the Domain value. For example, if you requested a certificate // for site.subdomain.example.com and specify a ValidationDomain of subdomain.example.com, // ACM sends email to the domain registrant, technical contact, and administrative // contact in WHOIS and the following five addresses: // // * admin@subdomain.example.com // // * administrator@subdomain.example.com // // * hostmaster@subdomain.example.com // // * postmaster@subdomain.example.com // // * webmaster@subdomain.example.com // // ValidationDomain is a required field ValidationDomain *string `min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
func (ResendValidationEmailInput) GoString ¶
func (s ResendValidationEmailInput) GoString() string
GoString returns the string representation
func (*ResendValidationEmailInput) SetCertificateArn ¶ added in v1.5.0
func (s *ResendValidationEmailInput) SetCertificateArn(v string) *ResendValidationEmailInput
SetCertificateArn sets the CertificateArn field's value.
func (*ResendValidationEmailInput) SetDomain ¶ added in v1.5.0
func (s *ResendValidationEmailInput) SetDomain(v string) *ResendValidationEmailInput
SetDomain sets the Domain field's value.
func (*ResendValidationEmailInput) SetValidationDomain ¶ added in v1.5.0
func (s *ResendValidationEmailInput) SetValidationDomain(v string) *ResendValidationEmailInput
SetValidationDomain sets the ValidationDomain field's value.
func (ResendValidationEmailInput) String ¶
func (s ResendValidationEmailInput) String() string
String returns the string representation
func (*ResendValidationEmailInput) Validate ¶ added in v1.1.21
func (s *ResendValidationEmailInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ResendValidationEmailOutput ¶
type ResendValidationEmailOutput struct {
// contains filtered or unexported fields
}
func (ResendValidationEmailOutput) GoString ¶
func (s ResendValidationEmailOutput) GoString() string
GoString returns the string representation
func (ResendValidationEmailOutput) String ¶
func (s ResendValidationEmailOutput) String() string
String returns the string representation
type Tag ¶ added in v1.1.20
type Tag struct { // The key of the tag. // // Key is a required field Key *string `min:"1" type:"string" required:"true"` // The value of the tag. Value *string `type:"string"` // contains filtered or unexported fields }
A key-value pair that identifies or specifies metadata about an ACM resource.