dynamodb

package
v1.12.47 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 14, 2017 License: Apache-2.0 Imports: 16 Imported by: 0

Documentation

Overview

Package dynamodb provides the client and types for making API requests to Amazon DynamoDB.

Amazon DynamoDB is a fully managed NoSQL database service that provides fast and predictable performance with seamless scalability. DynamoDB lets you offload the administrative burdens of operating and scaling a distributed database, so that you don't have to worry about hardware provisioning, setup and configuration, replication, software patching, or cluster scaling.

With DynamoDB, you can create database tables that can store and retrieve any amount of data, and serve any level of request traffic. You can scale up or scale down your tables' throughput capacity without downtime or performance degradation, and use the AWS Management Console to monitor resource utilization and performance metrics.

DynamoDB automatically spreads the data and traffic for your tables over a sufficient number of servers to handle your throughput and storage requirements, while maintaining consistent and fast performance. All of your data is stored on solid state disks (SSDs) and automatically replicated across multiple Availability Zones in an AWS region, providing built-in high availability and data durability.

See https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10 for more information on this service.

See dynamodb package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/dynamodb/

Using the Client

To contact Amazon DynamoDB with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently.

See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/

See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config

See the Amazon DynamoDB client DynamoDB for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/dynamodb/#New

AttributeValue Marshaling and Unmarshaling Helpers

Utility helpers to marshal and unmarshal AttributeValue to and from Go types can be found in the dynamodbattribute sub package. This package provides has specialized functions for the common ways of working with AttributeValues. Such as map[string]*AttributeValue, []*AttributeValue, and directly with *AttributeValue. This is helpful for marshaling Go types for API operations such as PutItem, and unmarshaling Query and Scan APIs' responses.

See the dynamodbattribute package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/dynamodb/dynamodbattribute/

Expression Builders

The expression package provides utility types and functions to build DynamoDB expression for type safe construction of API ExpressionAttributeNames, and ExpressionAttribute Values.

The package represents the various DynamoDB Expressions as structs named accordingly. For example, ConditionBuilder represents a DynamoDB Condition Expression, an UpdateBuilder represents a DynamoDB Update Expression, and so on.

See the expression package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/dynamodb/expression/

Index

Examples

Constants

View Source
const (
	// AttributeActionAdd is a AttributeAction enum value
	AttributeActionAdd = "ADD"

	// AttributeActionPut is a AttributeAction enum value
	AttributeActionPut = "PUT"

	// AttributeActionDelete is a AttributeAction enum value
	AttributeActionDelete = "DELETE"
)
View Source
const (
	// BackupStatusCreating is a BackupStatus enum value
	BackupStatusCreating = "CREATING"

	// BackupStatusDeleted is a BackupStatus enum value
	BackupStatusDeleted = "DELETED"

	// BackupStatusAvailable is a BackupStatus enum value
	BackupStatusAvailable = "AVAILABLE"
)
View Source
const (
	// ComparisonOperatorEq is a ComparisonOperator enum value
	ComparisonOperatorEq = "EQ"

	// ComparisonOperatorNe is a ComparisonOperator enum value
	ComparisonOperatorNe = "NE"

	// ComparisonOperatorIn is a ComparisonOperator enum value
	ComparisonOperatorIn = "IN"

	// ComparisonOperatorLe is a ComparisonOperator enum value
	ComparisonOperatorLe = "LE"

	// ComparisonOperatorLt is a ComparisonOperator enum value
	ComparisonOperatorLt = "LT"

	// ComparisonOperatorGe is a ComparisonOperator enum value
	ComparisonOperatorGe = "GE"

	// ComparisonOperatorGt is a ComparisonOperator enum value
	ComparisonOperatorGt = "GT"

	// ComparisonOperatorBetween is a ComparisonOperator enum value
	ComparisonOperatorBetween = "BETWEEN"

	// ComparisonOperatorNotNull is a ComparisonOperator enum value
	ComparisonOperatorNotNull = "NOT_NULL"

	// ComparisonOperatorNull is a ComparisonOperator enum value
	ComparisonOperatorNull = "NULL"

	// ComparisonOperatorContains is a ComparisonOperator enum value
	ComparisonOperatorContains = "CONTAINS"

	// ComparisonOperatorNotContains is a ComparisonOperator enum value
	ComparisonOperatorNotContains = "NOT_CONTAINS"

	// ComparisonOperatorBeginsWith is a ComparisonOperator enum value
	ComparisonOperatorBeginsWith = "BEGINS_WITH"
)
View Source
const (
	// ConditionalOperatorAnd is a ConditionalOperator enum value
	ConditionalOperatorAnd = "AND"

	// ConditionalOperatorOr is a ConditionalOperator enum value
	ConditionalOperatorOr = "OR"
)
View Source
const (
	// ContinuousBackupsStatusEnabled is a ContinuousBackupsStatus enum value
	ContinuousBackupsStatusEnabled = "ENABLED"

	// ContinuousBackupsStatusDisabled is a ContinuousBackupsStatus enum value
	ContinuousBackupsStatusDisabled = "DISABLED"
)
View Source
const (
	// GlobalTableStatusCreating is a GlobalTableStatus enum value
	GlobalTableStatusCreating = "CREATING"

	// GlobalTableStatusActive is a GlobalTableStatus enum value
	GlobalTableStatusActive = "ACTIVE"

	// GlobalTableStatusDeleting is a GlobalTableStatus enum value
	GlobalTableStatusDeleting = "DELETING"

	// GlobalTableStatusUpdating is a GlobalTableStatus enum value
	GlobalTableStatusUpdating = "UPDATING"
)
View Source
const (
	// IndexStatusCreating is a IndexStatus enum value
	IndexStatusCreating = "CREATING"

	// IndexStatusUpdating is a IndexStatus enum value
	IndexStatusUpdating = "UPDATING"

	// IndexStatusDeleting is a IndexStatus enum value
	IndexStatusDeleting = "DELETING"

	// IndexStatusActive is a IndexStatus enum value
	IndexStatusActive = "ACTIVE"
)
View Source
const (
	// KeyTypeHash is a KeyType enum value
	KeyTypeHash = "HASH"

	// KeyTypeRange is a KeyType enum value
	KeyTypeRange = "RANGE"
)
View Source
const (
	// ProjectionTypeAll is a ProjectionType enum value
	ProjectionTypeAll = "ALL"

	// ProjectionTypeKeysOnly is a ProjectionType enum value
	ProjectionTypeKeysOnly = "KEYS_ONLY"

	// ProjectionTypeInclude is a ProjectionType enum value
	ProjectionTypeInclude = "INCLUDE"
)
View Source
const (
	// ReturnConsumedCapacityIndexes is a ReturnConsumedCapacity enum value
	ReturnConsumedCapacityIndexes = "INDEXES"

	// ReturnConsumedCapacityTotal is a ReturnConsumedCapacity enum value
	ReturnConsumedCapacityTotal = "TOTAL"

	// ReturnConsumedCapacityNone is a ReturnConsumedCapacity enum value
	ReturnConsumedCapacityNone = "NONE"
)

Determines the level of detail about provisioned throughput consumption that is returned in the response:

  • INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

Note that some operations, such as GetItem and BatchGetItem, do not access

any indexes at all. In these cases, specifying INDEXES will only return
ConsumedCapacity information for table(s).

* TOTAL - The response includes only the aggregate ConsumedCapacity for
the operation.

* NONE - No ConsumedCapacity details are included in the response.
View Source
const (
	// ReturnItemCollectionMetricsSize is a ReturnItemCollectionMetrics enum value
	ReturnItemCollectionMetricsSize = "SIZE"

	// ReturnItemCollectionMetricsNone is a ReturnItemCollectionMetrics enum value
	ReturnItemCollectionMetricsNone = "NONE"
)
View Source
const (
	// ReturnValueNone is a ReturnValue enum value
	ReturnValueNone = "NONE"

	// ReturnValueAllOld is a ReturnValue enum value
	ReturnValueAllOld = "ALL_OLD"

	// ReturnValueUpdatedOld is a ReturnValue enum value
	ReturnValueUpdatedOld = "UPDATED_OLD"

	// ReturnValueAllNew is a ReturnValue enum value
	ReturnValueAllNew = "ALL_NEW"

	// ReturnValueUpdatedNew is a ReturnValue enum value
	ReturnValueUpdatedNew = "UPDATED_NEW"
)
View Source
const (
	// ScalarAttributeTypeS is a ScalarAttributeType enum value
	ScalarAttributeTypeS = "S"

	// ScalarAttributeTypeN is a ScalarAttributeType enum value
	ScalarAttributeTypeN = "N"

	// ScalarAttributeTypeB is a ScalarAttributeType enum value
	ScalarAttributeTypeB = "B"
)
View Source
const (
	// SelectAllAttributes is a Select enum value
	SelectAllAttributes = "ALL_ATTRIBUTES"

	// SelectAllProjectedAttributes is a Select enum value
	SelectAllProjectedAttributes = "ALL_PROJECTED_ATTRIBUTES"

	// SelectSpecificAttributes is a Select enum value
	SelectSpecificAttributes = "SPECIFIC_ATTRIBUTES"

	// SelectCount is a Select enum value
	SelectCount = "COUNT"
)
View Source
const (
	// StreamViewTypeNewImage is a StreamViewType enum value
	StreamViewTypeNewImage = "NEW_IMAGE"

	// StreamViewTypeOldImage is a StreamViewType enum value
	StreamViewTypeOldImage = "OLD_IMAGE"

	// StreamViewTypeNewAndOldImages is a StreamViewType enum value
	StreamViewTypeNewAndOldImages = "NEW_AND_OLD_IMAGES"

	// StreamViewTypeKeysOnly is a StreamViewType enum value
	StreamViewTypeKeysOnly = "KEYS_ONLY"
)
View Source
const (
	// TableStatusCreating is a TableStatus enum value
	TableStatusCreating = "CREATING"

	// TableStatusUpdating is a TableStatus enum value
	TableStatusUpdating = "UPDATING"

	// TableStatusDeleting is a TableStatus enum value
	TableStatusDeleting = "DELETING"

	// TableStatusActive is a TableStatus enum value
	TableStatusActive = "ACTIVE"
)
View Source
const (
	// TimeToLiveStatusEnabling is a TimeToLiveStatus enum value
	TimeToLiveStatusEnabling = "ENABLING"

	// TimeToLiveStatusDisabling is a TimeToLiveStatus enum value
	TimeToLiveStatusDisabling = "DISABLING"

	// TimeToLiveStatusEnabled is a TimeToLiveStatus enum value
	TimeToLiveStatusEnabled = "ENABLED"

	// TimeToLiveStatusDisabled is a TimeToLiveStatus enum value
	TimeToLiveStatusDisabled = "DISABLED"
)
View Source
const (

	// ErrCodeBackupInUseException for service response error code
	// "BackupInUseException".
	//
	// There is another ongoing conflicting backup control plane operation on the
	// table. The backups is either being created, deleted or restored to a table.
	ErrCodeBackupInUseException = "BackupInUseException"

	// ErrCodeBackupNotFoundException for service response error code
	// "BackupNotFoundException".
	//
	// Backup not found for the given BackupARN.
	ErrCodeBackupNotFoundException = "BackupNotFoundException"

	// ErrCodeConditionalCheckFailedException for service response error code
	// "ConditionalCheckFailedException".
	//
	// A condition specified in the operation could not be evaluated.
	ErrCodeConditionalCheckFailedException = "ConditionalCheckFailedException"

	// ErrCodeContinuousBackupsUnavailableException for service response error code
	// "ContinuousBackupsUnavailableException".
	//
	// Backups have not yet been enabled for this table.
	ErrCodeContinuousBackupsUnavailableException = "ContinuousBackupsUnavailableException"

	// ErrCodeGlobalTableAlreadyExistsException for service response error code
	// "GlobalTableAlreadyExistsException".
	//
	// The specified global table already exists.
	ErrCodeGlobalTableAlreadyExistsException = "GlobalTableAlreadyExistsException"

	// ErrCodeGlobalTableNotFoundException for service response error code
	// "GlobalTableNotFoundException".
	//
	// The specified global table does not exist.
	ErrCodeGlobalTableNotFoundException = "GlobalTableNotFoundException"

	// ErrCodeInternalServerError for service response error code
	// "InternalServerError".
	//
	// An error occurred on the server side.
	ErrCodeInternalServerError = "InternalServerError"

	// ErrCodeItemCollectionSizeLimitExceededException for service response error code
	// "ItemCollectionSizeLimitExceededException".
	//
	// An item collection is too large. This exception is only returned for tables
	// that have one or more local secondary indexes.
	ErrCodeItemCollectionSizeLimitExceededException = "ItemCollectionSizeLimitExceededException"

	// ErrCodeLimitExceededException for service response error code
	// "LimitExceededException".
	//
	// The number of concurrent table requests (cumulative number of tables in the
	// CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.
	//
	// Also, for tables with secondary indexes, only one of those tables can be
	// in the CREATING state at any point in time. Do not attempt to create more
	// than one such table simultaneously.
	//
	// The total limit of tables in the ACTIVE state is 250.
	ErrCodeLimitExceededException = "LimitExceededException"

	// ErrCodeProvisionedThroughputExceededException for service response error code
	// "ProvisionedThroughputExceededException".
	//
	// Your request rate is too high. The AWS SDKs for DynamoDB automatically retry
	// requests that receive this exception. Your request is eventually successful,
	// unless your retry queue is too large to finish. Reduce the frequency of requests
	// and use exponential backoff. For more information, go to Error Retries and
	// Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff)
	// in the Amazon DynamoDB Developer Guide.
	ErrCodeProvisionedThroughputExceededException = "ProvisionedThroughputExceededException"

	// ErrCodeReplicaAlreadyExistsException for service response error code
	// "ReplicaAlreadyExistsException".
	//
	// The specified replica is already part of the global table.
	ErrCodeReplicaAlreadyExistsException = "ReplicaAlreadyExistsException"

	// ErrCodeReplicaNotFoundException for service response error code
	// "ReplicaNotFoundException".
	//
	// The specified replica is no longer part of the global table.
	ErrCodeReplicaNotFoundException = "ReplicaNotFoundException"

	// ErrCodeResourceInUseException for service response error code
	// "ResourceInUseException".
	//
	// The operation conflicts with the resource's availability. For example, you
	// attempted to recreate an existing table, or tried to delete a table currently
	// in the CREATING state.
	ErrCodeResourceInUseException = "ResourceInUseException"

	// ErrCodeResourceNotFoundException for service response error code
	// "ResourceNotFoundException".
	//
	// The operation tried to access a nonexistent table or index. The resource
	// might not be specified correctly, or its status might not be ACTIVE.
	ErrCodeResourceNotFoundException = "ResourceNotFoundException"

	// ErrCodeTableAlreadyExistsException for service response error code
	// "TableAlreadyExistsException".
	//
	// A table with the name already exists.
	ErrCodeTableAlreadyExistsException = "TableAlreadyExistsException"

	// ErrCodeTableInUseException for service response error code
	// "TableInUseException".
	//
	// A table by that name is either being created or deleted.
	ErrCodeTableInUseException = "TableInUseException"

	// ErrCodeTableNotFoundException for service response error code
	// "TableNotFoundException".
	//
	// A table with the name TableName does not currently exist within the subscriber's
	// account.
	ErrCodeTableNotFoundException = "TableNotFoundException"
)
View Source
const (
	ServiceName = "dynamodb"  // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

This section is empty.

Types

type AttributeDefinition

type AttributeDefinition struct {

	// A name for the attribute.
	//
	// AttributeName is a required field
	AttributeName *string `min:"1" type:"string" required:"true"`

	// The data type for the attribute, where:
	//
	//    * S - the attribute is of type String
	//
	//    * N - the attribute is of type Number
	//
	//    * B - the attribute is of type Binary
	//
	// AttributeType is a required field
	AttributeType *string `type:"string" required:"true" enum:"ScalarAttributeType"`
	// contains filtered or unexported fields
}

Represents an attribute for describing the key schema for the table and indexes. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/AttributeDefinition

func (AttributeDefinition) GoString added in v0.6.5

func (s AttributeDefinition) GoString() string

GoString returns the string representation

func (*AttributeDefinition) SetAttributeName added in v1.5.0

func (s *AttributeDefinition) SetAttributeName(v string) *AttributeDefinition

SetAttributeName sets the AttributeName field's value.

func (*AttributeDefinition) SetAttributeType added in v1.5.0

func (s *AttributeDefinition) SetAttributeType(v string) *AttributeDefinition

SetAttributeType sets the AttributeType field's value.

func (AttributeDefinition) String added in v0.6.5

func (s AttributeDefinition) String() string

String returns the string representation

func (*AttributeDefinition) Validate added in v1.1.21

func (s *AttributeDefinition) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttributeValue

type AttributeValue struct {

	// An attribute of type Binary. For example:
	//
	// "B": "dGhpcyB0ZXh0IGlzIGJhc2U2NC1lbmNvZGVk"
	//
	// B is automatically base64 encoded/decoded by the SDK.
	B []byte `type:"blob"`

	// An attribute of type Boolean. For example:
	//
	// "BOOL": true
	BOOL *bool `type:"boolean"`

	// An attribute of type Binary Set. For example:
	//
	// "BS": ["U3Vubnk=", "UmFpbnk=", "U25vd3k="]
	BS [][]byte `type:"list"`

	// An attribute of type List. For example:
	//
	// "L": ["Cookies", "Coffee", 3.14159]
	L []*AttributeValue `type:"list"`

	// An attribute of type Map. For example:
	//
	// "M": {"Name": {"S": "Joe"}, "Age": {"N": "35"}}
	M map[string]*AttributeValue `type:"map"`

	// An attribute of type Number. For example:
	//
	// "N": "123.45"
	//
	// Numbers are sent across the network to DynamoDB as strings, to maximize compatibility
	// across languages and libraries. However, DynamoDB treats them as number type
	// attributes for mathematical operations.
	N *string `type:"string"`

	// An attribute of type Number Set. For example:
	//
	// "NS": ["42.2", "-19", "7.5", "3.14"]
	//
	// Numbers are sent across the network to DynamoDB as strings, to maximize compatibility
	// across languages and libraries. However, DynamoDB treats them as number type
	// attributes for mathematical operations.
	NS []*string `type:"list"`

	// An attribute of type Null. For example:
	//
	// "NULL": true
	NULL *bool `type:"boolean"`

	// An attribute of type String. For example:
	//
	// "S": "Hello"
	S *string `type:"string"`

	// An attribute of type String Set. For example:
	//
	// "SS": ["Giraffe", "Hippo" ,"Zebra"]
	SS []*string `type:"list"`
	// contains filtered or unexported fields
}

Represents the data for an attribute.

Each attribute value is described as a name-value pair. The name is the data type, and the value is the data itself.

For more information, see Data Types (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html#HowItWorks.DataTypes) in the Amazon DynamoDB Developer Guide. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/AttributeValue

func (AttributeValue) GoString added in v0.6.5

func (s AttributeValue) GoString() string

GoString returns the string representation

func (*AttributeValue) SetB added in v1.5.0

func (s *AttributeValue) SetB(v []byte) *AttributeValue

SetB sets the B field's value.

func (*AttributeValue) SetBOOL added in v1.5.0

func (s *AttributeValue) SetBOOL(v bool) *AttributeValue

SetBOOL sets the BOOL field's value.

func (*AttributeValue) SetBS added in v1.5.0

func (s *AttributeValue) SetBS(v [][]byte) *AttributeValue

SetBS sets the BS field's value.

func (*AttributeValue) SetL added in v1.5.0

SetL sets the L field's value.

func (*AttributeValue) SetM added in v1.5.0

SetM sets the M field's value.

func (*AttributeValue) SetN added in v1.5.0

func (s *AttributeValue) SetN(v string) *AttributeValue

SetN sets the N field's value.

func (*AttributeValue) SetNS added in v1.5.0

func (s *AttributeValue) SetNS(v []*string) *AttributeValue

SetNS sets the NS field's value.

func (*AttributeValue) SetNULL added in v1.5.0

func (s *AttributeValue) SetNULL(v bool) *AttributeValue

SetNULL sets the NULL field's value.

func (*AttributeValue) SetS added in v1.5.0

func (s *AttributeValue) SetS(v string) *AttributeValue

SetS sets the S field's value.

func (*AttributeValue) SetSS added in v1.5.0

func (s *AttributeValue) SetSS(v []*string) *AttributeValue

SetSS sets the SS field's value.

func (AttributeValue) String added in v0.6.5

func (s AttributeValue) String() string

String returns the string representation

type AttributeValueUpdate

type AttributeValueUpdate struct {

	// Specifies how to perform the update. Valid values are PUT (default), DELETE,
	// and ADD. The behavior depends on whether the specified primary key already
	// exists in the table.
	//
	// If an item with the specified Key is found in the table:
	//
	//    * PUT - Adds the specified attribute to the item. If the attribute already
	//    exists, it is replaced by the new value.
	//
	//    * DELETE - If no value is specified, the attribute and its value are removed
	//    from the item. The data type of the specified value must match the existing
	//    value's data type.
	//
	// If a set of values is specified, then those values are subtracted from the
	//    old set. For example, if the attribute value was the set [a,b,c] and the
	//    DELETE action specified [a,c], then the final attribute value would be
	//    [b]. Specifying an empty set is an error.
	//
	//    * ADD - If the attribute does not already exist, then the attribute and
	//    its values are added to the item. If the attribute does exist, then the
	//    behavior of ADD depends on the data type of the attribute:
	//
	// If the existing attribute is a number, and if Value is also a number, then
	//    the Value is mathematically added to the existing attribute. If Value
	//    is a negative number, then it is subtracted from the existing attribute.
	//
	//  If you use ADD to increment or decrement a number value for an item that
	//    doesn't exist before the update, DynamoDB uses 0 as the initial value.
	//
	// In addition, if you use ADD to update an existing item, and intend to increment
	//    or decrement an attribute value which does not yet exist, DynamoDB uses
	//    0 as the initial value. For example, suppose that the item you want to
	//    update does not yet have an attribute named itemcount, but you decide
	//    to ADD the number 3 to this attribute anyway, even though it currently
	//    does not exist. DynamoDB will create the itemcount attribute, set its
	//    initial value to 0, and finally add 3 to it. The result will be a new
	//    itemcount attribute in the item, with a value of 3.
	//
	// If the existing data type is a set, and if the Value is also a set, then
	//    the Value is added to the existing set. (This is a set operation, not
	//    mathematical addition.) For example, if the attribute value was the set
	//    [1,2], and the ADD action specified [3], then the final attribute value
	//    would be [1,2,3]. An error occurs if an Add action is specified for a
	//    set attribute and the attribute type specified does not match the existing
	//    set type.
	//
	// Both sets must have the same primitive data type. For example, if the existing
	//    data type is a set of strings, the Value must also be a set of strings.
	//    The same holds true for number sets and binary sets.
	//
	// This action is only valid for an existing attribute whose data type is number
	//    or is a set. Do not use ADD for any other data types.
	//
	// If no item with the specified Key is found:
	//
	//    * PUT - DynamoDB creates a new item with the specified primary key, and
	//    then adds the attribute.
	//
	//    * DELETE - Nothing happens; there is no attribute to delete.
	//
	//    * ADD - DynamoDB creates an item with the supplied primary key and number
	//    (or set of numbers) for the attribute value. The only data types allowed
	//    are number and number set; no other data types can be specified.
	Action *string `type:"string" enum:"AttributeAction"`

	// Represents the data for an attribute.
	//
	// Each attribute value is described as a name-value pair. The name is the data
	// type, and the value is the data itself.
	//
	// For more information, see Data TYpes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html#HowItWorks.DataTypes)
	// in the Amazon DynamoDB Developer Guide.
	Value *AttributeValue `type:"structure"`
	// contains filtered or unexported fields
}

For the UpdateItem operation, represents the attributes to be modified, the action to perform on each, and the new value for each.

You cannot use UpdateItem to update any primary key attributes. Instead, you will need to delete the item, and then use PutItem to create a new item with new attributes.

Attribute values cannot be null; string and binary type attributes must have lengths greater than zero; and set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/AttributeValueUpdate

func (AttributeValueUpdate) GoString added in v0.6.5

func (s AttributeValueUpdate) GoString() string

GoString returns the string representation

func (*AttributeValueUpdate) SetAction added in v1.5.0

SetAction sets the Action field's value.

func (*AttributeValueUpdate) SetValue added in v1.5.0

SetValue sets the Value field's value.

func (AttributeValueUpdate) String added in v0.6.5

func (s AttributeValueUpdate) String() string

String returns the string representation

type BackupDescription added in v1.12.36

type BackupDescription struct {

	// Contains the details of the backup created for the table.
	BackupDetails *BackupDetails `type:"structure"`

	// Contains the details of the table when the backup was created.
	SourceTableDetails *SourceTableDetails `type:"structure"`

	// Contains the details of the features enabled on the table when the backup
	// was created. For example, LSIs, GSIs, streams, TTL.
	SourceTableFeatureDetails *SourceTableFeatureDetails `type:"structure"`
	// contains filtered or unexported fields
}

Contains the description of the backup created for the table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BackupDescription

func (BackupDescription) GoString added in v1.12.36

func (s BackupDescription) GoString() string

GoString returns the string representation

func (*BackupDescription) SetBackupDetails added in v1.12.36

func (s *BackupDescription) SetBackupDetails(v *BackupDetails) *BackupDescription

SetBackupDetails sets the BackupDetails field's value.

func (*BackupDescription) SetSourceTableDetails added in v1.12.36

func (s *BackupDescription) SetSourceTableDetails(v *SourceTableDetails) *BackupDescription

SetSourceTableDetails sets the SourceTableDetails field's value.

func (*BackupDescription) SetSourceTableFeatureDetails added in v1.12.36

func (s *BackupDescription) SetSourceTableFeatureDetails(v *SourceTableFeatureDetails) *BackupDescription

SetSourceTableFeatureDetails sets the SourceTableFeatureDetails field's value.

func (BackupDescription) String added in v1.12.36

func (s BackupDescription) String() string

String returns the string representation

type BackupDetails added in v1.12.36

type BackupDetails struct {

	// ARN associated with the backup.
	//
	// BackupArn is a required field
	BackupArn *string `min:"37" type:"string" required:"true"`

	// Time at which the backup was created. This is the request time of the backup.
	//
	// BackupCreationDateTime is a required field
	BackupCreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix" required:"true"`

	// Name of the requested backup.
	//
	// BackupName is a required field
	BackupName *string `min:"3" type:"string" required:"true"`

	// Size of the backup in bytes.
	BackupSizeBytes *int64 `type:"long"`

	// Backup can be in one of the following states: CREATING, ACTIVE, DELETED.
	//
	// BackupStatus is a required field
	BackupStatus *string `type:"string" required:"true" enum:"BackupStatus"`
	// contains filtered or unexported fields
}

Contains the details of the backup created for the table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BackupDetails

func (BackupDetails) GoString added in v1.12.36

func (s BackupDetails) GoString() string

GoString returns the string representation

func (*BackupDetails) SetBackupArn added in v1.12.36

func (s *BackupDetails) SetBackupArn(v string) *BackupDetails

SetBackupArn sets the BackupArn field's value.

func (*BackupDetails) SetBackupCreationDateTime added in v1.12.36

func (s *BackupDetails) SetBackupCreationDateTime(v time.Time) *BackupDetails

SetBackupCreationDateTime sets the BackupCreationDateTime field's value.

func (*BackupDetails) SetBackupName added in v1.12.36

func (s *BackupDetails) SetBackupName(v string) *BackupDetails

SetBackupName sets the BackupName field's value.

func (*BackupDetails) SetBackupSizeBytes added in v1.12.36

func (s *BackupDetails) SetBackupSizeBytes(v int64) *BackupDetails

SetBackupSizeBytes sets the BackupSizeBytes field's value.

func (*BackupDetails) SetBackupStatus added in v1.12.36

func (s *BackupDetails) SetBackupStatus(v string) *BackupDetails

SetBackupStatus sets the BackupStatus field's value.

func (BackupDetails) String added in v1.12.36

func (s BackupDetails) String() string

String returns the string representation

type BackupSummary added in v1.12.36

type BackupSummary struct {

	// ARN associated with the backup.
	BackupArn *string `min:"37" type:"string"`

	// Time at which the backup was created.
	BackupCreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// Name of the specified backup.
	BackupName *string `min:"3" type:"string"`

	// Size of the backup in bytes.
	BackupSizeBytes *int64 `type:"long"`

	// Backup can be in one of the following states: CREATING, ACTIVE, DELETED.
	BackupStatus *string `type:"string" enum:"BackupStatus"`

	// ARN associated with the table.
	TableArn *string `type:"string"`

	// Unique identifier for the table.
	TableId *string `type:"string"`

	// Name of the table.
	TableName *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

Contains details for the backup. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BackupSummary

func (BackupSummary) GoString added in v1.12.36

func (s BackupSummary) GoString() string

GoString returns the string representation

func (*BackupSummary) SetBackupArn added in v1.12.36

func (s *BackupSummary) SetBackupArn(v string) *BackupSummary

SetBackupArn sets the BackupArn field's value.

func (*BackupSummary) SetBackupCreationDateTime added in v1.12.36

func (s *BackupSummary) SetBackupCreationDateTime(v time.Time) *BackupSummary

SetBackupCreationDateTime sets the BackupCreationDateTime field's value.

func (*BackupSummary) SetBackupName added in v1.12.36

func (s *BackupSummary) SetBackupName(v string) *BackupSummary

SetBackupName sets the BackupName field's value.

func (*BackupSummary) SetBackupSizeBytes added in v1.12.36

func (s *BackupSummary) SetBackupSizeBytes(v int64) *BackupSummary

SetBackupSizeBytes sets the BackupSizeBytes field's value.

func (*BackupSummary) SetBackupStatus added in v1.12.36

func (s *BackupSummary) SetBackupStatus(v string) *BackupSummary

SetBackupStatus sets the BackupStatus field's value.

func (*BackupSummary) SetTableArn added in v1.12.36

func (s *BackupSummary) SetTableArn(v string) *BackupSummary

SetTableArn sets the TableArn field's value.

func (*BackupSummary) SetTableId added in v1.12.36

func (s *BackupSummary) SetTableId(v string) *BackupSummary

SetTableId sets the TableId field's value.

func (*BackupSummary) SetTableName added in v1.12.36

func (s *BackupSummary) SetTableName(v string) *BackupSummary

SetTableName sets the TableName field's value.

func (BackupSummary) String added in v1.12.36

func (s BackupSummary) String() string

String returns the string representation

type BatchGetItemInput

type BatchGetItemInput struct {

	// A map of one or more table names and, for each table, a map that describes
	// one or more items to retrieve from that table. Each table name can be used
	// only once per BatchGetItem request.
	//
	// Each element in the map of items to retrieve consists of the following:
	//
	//    * ConsistentRead - If true, a strongly consistent read is used; if false
	//    (the default), an eventually consistent read is used.
	//
	//    * ExpressionAttributeNames - One or more substitution tokens for attribute
	//    names in the ProjectionExpression parameter. The following are some use
	//    cases for using ExpressionAttributeNames:
	//
	// To access an attribute whose name conflicts with a DynamoDB reserved word.
	//
	// To create a placeholder for repeating occurrences of an attribute name in
	//    an expression.
	//
	// To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	//    example, consider the following attribute name:
	//
	// Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	//    used directly in an expression. (For the complete list of reserved words,
	//    see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	//    in the Amazon DynamoDB Developer Guide). To work around this, you could
	//    specify the following for ExpressionAttributeNames:
	//
	// {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	// #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	//    are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	//    (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	//    in the Amazon DynamoDB Developer Guide.
	//
	//    * Keys - An array of primary key attribute values that define specific
	//    items in the table. For each primary key, you must provide all of the
	//    key attributes. For example, with a simple primary key, you only need
	//    to provide the partition key value. For a composite key, you must provide
	//    both the partition key value and the sort key value.
	//
	//    * ProjectionExpression - A string that identifies one or more attributes
	//    to retrieve from the table. These attributes can include scalars, sets,
	//    or elements of a JSON document. The attributes in the expression must
	//    be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	//    If any of the requested attributes are not found, they will not appear
	//    in the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	//    in the Amazon DynamoDB Developer Guide.
	//
	//    * AttributesToGet - This is a legacy parameter. Use ProjectionExpression
	//    instead. For more information, see AttributesToGet (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html)
	//    in the Amazon DynamoDB Developer Guide.
	//
	// RequestItems is a required field
	RequestItems map[string]*KeysAndAttributes `min:"1" type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`
	// contains filtered or unexported fields
}

Represents the input of a BatchGetItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchGetItemInput

func (BatchGetItemInput) GoString added in v0.6.5

func (s BatchGetItemInput) GoString() string

GoString returns the string representation

func (*BatchGetItemInput) SetRequestItems added in v1.5.0

func (s *BatchGetItemInput) SetRequestItems(v map[string]*KeysAndAttributes) *BatchGetItemInput

SetRequestItems sets the RequestItems field's value.

func (*BatchGetItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *BatchGetItemInput) SetReturnConsumedCapacity(v string) *BatchGetItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (BatchGetItemInput) String added in v0.6.5

func (s BatchGetItemInput) String() string

String returns the string representation

func (*BatchGetItemInput) Validate added in v1.1.21

func (s *BatchGetItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BatchGetItemOutput

type BatchGetItemOutput struct {

	// The read capacity units consumed by the entire BatchGetItem operation.
	//
	// Each element consists of:
	//
	//    * TableName - The table that consumed the provisioned throughput.
	//
	//    * CapacityUnits - The total number of capacity units consumed.
	ConsumedCapacity []*ConsumedCapacity `type:"list"`

	// A map of table name to a list of items. Each object in Responses consists
	// of a table name, along with a map of attribute data consisting of the data
	// type and attribute value.
	Responses map[string][]map[string]*AttributeValue `type:"map"`

	// A map of tables and their respective keys that were not processed with the
	// current response. The UnprocessedKeys value is in the same form as RequestItems,
	// so the value can be provided directly to a subsequent BatchGetItem operation.
	// For more information, see RequestItems in the Request Parameters section.
	//
	// Each element consists of:
	//
	//    * Keys - An array of primary key attribute values that define specific
	//    items in the table.
	//
	//    * ProjectionExpression - One or more attributes to be retrieved from the
	//    table or index. By default, all attributes are returned. If a requested
	//    attribute is not found, it does not appear in the result.
	//
	//    * ConsistentRead - The consistency of a read operation. If set to true,
	//    then a strongly consistent read is used; otherwise, an eventually consistent
	//    read is used.
	//
	// If there are no unprocessed keys remaining, the response contains an empty
	// UnprocessedKeys map.
	UnprocessedKeys map[string]*KeysAndAttributes `min:"1" type:"map"`
	// contains filtered or unexported fields
}

Represents the output of a BatchGetItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchGetItemOutput

func (BatchGetItemOutput) GoString added in v0.6.5

func (s BatchGetItemOutput) GoString() string

GoString returns the string representation

func (*BatchGetItemOutput) SetConsumedCapacity added in v1.5.0

func (s *BatchGetItemOutput) SetConsumedCapacity(v []*ConsumedCapacity) *BatchGetItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*BatchGetItemOutput) SetResponses added in v1.5.0

func (s *BatchGetItemOutput) SetResponses(v map[string][]map[string]*AttributeValue) *BatchGetItemOutput

SetResponses sets the Responses field's value.

func (*BatchGetItemOutput) SetUnprocessedKeys added in v1.5.0

func (s *BatchGetItemOutput) SetUnprocessedKeys(v map[string]*KeysAndAttributes) *BatchGetItemOutput

SetUnprocessedKeys sets the UnprocessedKeys field's value.

func (BatchGetItemOutput) String added in v0.6.5

func (s BatchGetItemOutput) String() string

String returns the string representation

type BatchWriteItemInput

type BatchWriteItemInput struct {

	// A map of one or more table names and, for each table, a list of operations
	// to be performed (DeleteRequest or PutRequest). Each element in the map consists
	// of the following:
	//
	//    * DeleteRequest - Perform a DeleteItem operation on the specified item.
	//    The item to be deleted is identified by a Key subelement:
	//
	// Key - A map of primary key attribute values that uniquely identify the item.
	//    Each entry in this map consists of an attribute name and an attribute
	//    value. For each primary key, you must provide all of the key attributes.
	//    For example, with a simple primary key, you only need to provide a value
	//    for the partition key. For a composite primary key, you must provide values
	//    for both the partition key and the sort key.
	//
	//    * PutRequest - Perform a PutItem operation on the specified item. The
	//    item to be put is identified by an Item subelement:
	//
	// Item - A map of attributes and their values. Each entry in this map consists
	//    of an attribute name and an attribute value. Attribute values must not
	//    be null; string and binary type attributes must have lengths greater than
	//    zero; and set type attributes must not be empty. Requests that contain
	//    empty values will be rejected with a ValidationException exception.
	//
	// If you specify any attributes that are part of an index key, then the data
	//    types for those attributes must match those of the schema in the table's
	//    attribute definition.
	//
	// RequestItems is a required field
	RequestItems map[string][]*WriteRequest `min:"1" type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`
	// contains filtered or unexported fields
}

Represents the input of a BatchWriteItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchWriteItemInput

func (BatchWriteItemInput) GoString added in v0.6.5

func (s BatchWriteItemInput) GoString() string

GoString returns the string representation

func (*BatchWriteItemInput) SetRequestItems added in v1.5.0

func (s *BatchWriteItemInput) SetRequestItems(v map[string][]*WriteRequest) *BatchWriteItemInput

SetRequestItems sets the RequestItems field's value.

func (*BatchWriteItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *BatchWriteItemInput) SetReturnConsumedCapacity(v string) *BatchWriteItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*BatchWriteItemInput) SetReturnItemCollectionMetrics added in v1.5.0

func (s *BatchWriteItemInput) SetReturnItemCollectionMetrics(v string) *BatchWriteItemInput

SetReturnItemCollectionMetrics sets the ReturnItemCollectionMetrics field's value.

func (BatchWriteItemInput) String added in v0.6.5

func (s BatchWriteItemInput) String() string

String returns the string representation

func (*BatchWriteItemInput) Validate added in v1.1.21

func (s *BatchWriteItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BatchWriteItemOutput

type BatchWriteItemOutput struct {

	// The capacity units consumed by the entire BatchWriteItem operation.
	//
	// Each element consists of:
	//
	//    * TableName - The table that consumed the provisioned throughput.
	//
	//    * CapacityUnits - The total number of capacity units consumed.
	ConsumedCapacity []*ConsumedCapacity `type:"list"`

	// A list of tables that were processed by BatchWriteItem and, for each table,
	// information about any item collections that were affected by individual DeleteItem
	// or PutItem operations.
	//
	// Each entry consists of the following subelements:
	//
	//    * ItemCollectionKey - The partition key value of the item collection.
	//    This is the same as the partition key value of the item.
	//
	//    * SizeEstimateRangeGB - An estimate of item collection size, expressed
	//    in GB. This is a two-element array containing a lower bound and an upper
	//    bound for the estimate. The estimate includes the size of all the items
	//    in the table, plus the size of all attributes projected into all of the
	//    local secondary indexes on the table. Use this estimate to measure whether
	//    a local secondary index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	//    precision or accuracy of the estimate.
	ItemCollectionMetrics map[string][]*ItemCollectionMetrics `type:"map"`

	// A map of tables and requests against those tables that were not processed.
	// The UnprocessedItems value is in the same form as RequestItems, so you can
	// provide this value directly to a subsequent BatchGetItem operation. For more
	// information, see RequestItems in the Request Parameters section.
	//
	// Each UnprocessedItems entry consists of a table name and, for that table,
	// a list of operations to perform (DeleteRequest or PutRequest).
	//
	//    * DeleteRequest - Perform a DeleteItem operation on the specified item.
	//    The item to be deleted is identified by a Key subelement:
	//
	// Key - A map of primary key attribute values that uniquely identify the item.
	//    Each entry in this map consists of an attribute name and an attribute
	//    value.
	//
	//    * PutRequest - Perform a PutItem operation on the specified item. The
	//    item to be put is identified by an Item subelement:
	//
	// Item - A map of attributes and their values. Each entry in this map consists
	//    of an attribute name and an attribute value. Attribute values must not
	//    be null; string and binary type attributes must have lengths greater than
	//    zero; and set type attributes must not be empty. Requests that contain
	//    empty values will be rejected with a ValidationException exception.
	//
	// If you specify any attributes that are part of an index key, then the data
	//    types for those attributes must match those of the schema in the table's
	//    attribute definition.
	//
	// If there are no unprocessed items remaining, the response contains an empty
	// UnprocessedItems map.
	UnprocessedItems map[string][]*WriteRequest `min:"1" type:"map"`
	// contains filtered or unexported fields
}

Represents the output of a BatchWriteItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchWriteItemOutput

func (BatchWriteItemOutput) GoString added in v0.6.5

func (s BatchWriteItemOutput) GoString() string

GoString returns the string representation

func (*BatchWriteItemOutput) SetConsumedCapacity added in v1.5.0

func (s *BatchWriteItemOutput) SetConsumedCapacity(v []*ConsumedCapacity) *BatchWriteItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*BatchWriteItemOutput) SetItemCollectionMetrics added in v1.5.0

func (s *BatchWriteItemOutput) SetItemCollectionMetrics(v map[string][]*ItemCollectionMetrics) *BatchWriteItemOutput

SetItemCollectionMetrics sets the ItemCollectionMetrics field's value.

func (*BatchWriteItemOutput) SetUnprocessedItems added in v1.5.0

func (s *BatchWriteItemOutput) SetUnprocessedItems(v map[string][]*WriteRequest) *BatchWriteItemOutput

SetUnprocessedItems sets the UnprocessedItems field's value.

func (BatchWriteItemOutput) String added in v0.6.5

func (s BatchWriteItemOutput) String() string

String returns the string representation

type Capacity

type Capacity struct {

	// The total number of capacity units consumed on a table or an index.
	CapacityUnits *float64 `type:"double"`
	// contains filtered or unexported fields
}

Represents the amount of provisioned throughput capacity consumed on a table or an index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Capacity

func (Capacity) GoString added in v0.6.5

func (s Capacity) GoString() string

GoString returns the string representation

func (*Capacity) SetCapacityUnits added in v1.5.0

func (s *Capacity) SetCapacityUnits(v float64) *Capacity

SetCapacityUnits sets the CapacityUnits field's value.

func (Capacity) String added in v0.6.5

func (s Capacity) String() string

String returns the string representation

type Condition

type Condition struct {

	// One or more values to evaluate against the supplied attribute. The number
	// of values in the list depends on the ComparisonOperator being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	AttributeValueList []*AttributeValue `type:"list"`

	// A comparator for evaluating attributes. For example, equals, greater than,
	// less than, etc.
	//
	// The following comparison operators are available:
	//
	// EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS |
	// BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    * EQ : Equal. EQ is supported for all data types, including lists and
	//    maps.
	//
	// AttributeValueList can contain only one AttributeValue element of type String,
	//    Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	//    an AttributeValue element of a different type than the one provided in
	//    the request, the value does not match. For example, {"S":"6"} does not
	//    equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//    * NE : Not equal. NE is supported for all data types, including lists
	//    and maps.
	//
	//    * AttributeValueList can contain only one AttributeValue of type String,
	//    Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	//    an AttributeValue of a different type than the one provided in the request,
	//    the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	//    Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//    * LE : Less than or equal.
	//
	// AttributeValueList can contain only one AttributeValue element of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	// LT: Less than.
	//
	// AttributeValueListcan contain only one AttributeValueof type String, Number, or Binary (not a set type). If an item contains an
	// AttributeValueelement of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"}does not equal {"N":"6"}. Also, {"N":"6"}does not compare to {"NS":["6", "2", "1"]}
	//
	// ComparisonOperator is a required field
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`
	// contains filtered or unexported fields
}

Represents the selection criteria for a Query or Scan operation:

  • For a Query operation, Condition is used for specifying the KeyConditions to use when querying a table or an index. For KeyConditions, only the following comparison operators are supported:

EQ | LE | LT | GE | GT | BEGINS_WITH | BETWEEN

Condition is also used in a QueryFilter, which evaluates the query results

and returns only the desired values.

* For a Scan operation, Condition is used in a ScanFilter, which evaluates
the scan results and returns only the desired values.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Condition

func (Condition) GoString added in v0.6.5

func (s Condition) GoString() string

GoString returns the string representation

func (*Condition) SetAttributeValueList added in v1.5.0

func (s *Condition) SetAttributeValueList(v []*AttributeValue) *Condition

SetAttributeValueList sets the AttributeValueList field's value.

func (*Condition) SetComparisonOperator added in v1.5.0

func (s *Condition) SetComparisonOperator(v string) *Condition

SetComparisonOperator sets the ComparisonOperator field's value.

func (Condition) String added in v0.6.5

func (s Condition) String() string

String returns the string representation

func (*Condition) Validate added in v1.1.21

func (s *Condition) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConsumedCapacity

type ConsumedCapacity struct {

	// The total number of capacity units consumed by the operation.
	CapacityUnits *float64 `type:"double"`

	// The amount of throughput consumed on each global index affected by the operation.
	GlobalSecondaryIndexes map[string]*Capacity `type:"map"`

	// The amount of throughput consumed on each local index affected by the operation.
	LocalSecondaryIndexes map[string]*Capacity `type:"map"`

	// The amount of throughput consumed on the table affected by the operation.
	Table *Capacity `type:"structure"`

	// The name of the table that was affected by the operation.
	TableName *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

The capacity units consumed by an operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the request asked for it. For more information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html) in the Amazon DynamoDB Developer Guide. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ConsumedCapacity

func (ConsumedCapacity) GoString added in v0.6.5

func (s ConsumedCapacity) GoString() string

GoString returns the string representation

func (*ConsumedCapacity) SetCapacityUnits added in v1.5.0

func (s *ConsumedCapacity) SetCapacityUnits(v float64) *ConsumedCapacity

SetCapacityUnits sets the CapacityUnits field's value.

func (*ConsumedCapacity) SetGlobalSecondaryIndexes added in v1.5.0

func (s *ConsumedCapacity) SetGlobalSecondaryIndexes(v map[string]*Capacity) *ConsumedCapacity

SetGlobalSecondaryIndexes sets the GlobalSecondaryIndexes field's value.

func (*ConsumedCapacity) SetLocalSecondaryIndexes added in v1.5.0

func (s *ConsumedCapacity) SetLocalSecondaryIndexes(v map[string]*Capacity) *ConsumedCapacity

SetLocalSecondaryIndexes sets the LocalSecondaryIndexes field's value.

func (*ConsumedCapacity) SetTable added in v1.5.0

func (s *ConsumedCapacity) SetTable(v *Capacity) *ConsumedCapacity

SetTable sets the Table field's value.

func (*ConsumedCapacity) SetTableName added in v1.5.0

func (s *ConsumedCapacity) SetTableName(v string) *ConsumedCapacity

SetTableName sets the TableName field's value.

func (ConsumedCapacity) String added in v0.6.5

func (s ConsumedCapacity) String() string

String returns the string representation

type ContinuousBackupsDescription added in v1.12.36

type ContinuousBackupsDescription struct {

	// ContinuousBackupsStatus can be one of the following states : ENABLED, DISABLED
	//
	// ContinuousBackupsStatus is a required field
	ContinuousBackupsStatus *string `type:"string" required:"true" enum:"ContinuousBackupsStatus"`
	// contains filtered or unexported fields
}

Represents the backup and restore settings on the table when the backup was created. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ContinuousBackupsDescription

func (ContinuousBackupsDescription) GoString added in v1.12.36

func (s ContinuousBackupsDescription) GoString() string

GoString returns the string representation

func (*ContinuousBackupsDescription) SetContinuousBackupsStatus added in v1.12.36

func (s *ContinuousBackupsDescription) SetContinuousBackupsStatus(v string) *ContinuousBackupsDescription

SetContinuousBackupsStatus sets the ContinuousBackupsStatus field's value.

func (ContinuousBackupsDescription) String added in v1.12.36

String returns the string representation

type CreateBackupInput added in v1.12.36

type CreateBackupInput struct {

	// Specified name for the backup.
	//
	// BackupName is a required field
	BackupName *string `min:"3" type:"string" required:"true"`

	// The name of the table.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateBackupInput

func (CreateBackupInput) GoString added in v1.12.36

func (s CreateBackupInput) GoString() string

GoString returns the string representation

func (*CreateBackupInput) SetBackupName added in v1.12.36

func (s *CreateBackupInput) SetBackupName(v string) *CreateBackupInput

SetBackupName sets the BackupName field's value.

func (*CreateBackupInput) SetTableName added in v1.12.36

func (s *CreateBackupInput) SetTableName(v string) *CreateBackupInput

SetTableName sets the TableName field's value.

func (CreateBackupInput) String added in v1.12.36

func (s CreateBackupInput) String() string

String returns the string representation

func (*CreateBackupInput) Validate added in v1.12.36

func (s *CreateBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateBackupOutput added in v1.12.36

type CreateBackupOutput struct {

	// Contains the details of the backup created for the table.
	BackupDetails *BackupDetails `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateBackupOutput

func (CreateBackupOutput) GoString added in v1.12.36

func (s CreateBackupOutput) GoString() string

GoString returns the string representation

func (*CreateBackupOutput) SetBackupDetails added in v1.12.36

func (s *CreateBackupOutput) SetBackupDetails(v *BackupDetails) *CreateBackupOutput

SetBackupDetails sets the BackupDetails field's value.

func (CreateBackupOutput) String added in v1.12.36

func (s CreateBackupOutput) String() string

String returns the string representation

type CreateGlobalSecondaryIndexAction

type CreateGlobalSecondaryIndexAction struct {

	// The name of the global secondary index to be created.
	//
	// IndexName is a required field
	IndexName *string `min:"3" type:"string" required:"true"`

	// The key schema for the global secondary index.
	//
	// KeySchema is a required field
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into an
	// index. These are in addition to the primary key attributes and index key
	// attributes, which are automatically projected.
	//
	// Projection is a required field
	Projection *Projection `type:"structure" required:"true"`

	// Represents the provisioned throughput settings for the specified global secondary
	// index.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// ProvisionedThroughput is a required field
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents a new global secondary index to be added to an existing table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateGlobalSecondaryIndexAction

func (CreateGlobalSecondaryIndexAction) GoString added in v0.6.5

GoString returns the string representation

func (*CreateGlobalSecondaryIndexAction) SetIndexName added in v1.5.0

SetIndexName sets the IndexName field's value.

func (*CreateGlobalSecondaryIndexAction) SetKeySchema added in v1.5.0

SetKeySchema sets the KeySchema field's value.

func (*CreateGlobalSecondaryIndexAction) SetProjection added in v1.5.0

SetProjection sets the Projection field's value.

func (*CreateGlobalSecondaryIndexAction) SetProvisionedThroughput added in v1.5.0

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (CreateGlobalSecondaryIndexAction) String added in v0.6.5

String returns the string representation

func (*CreateGlobalSecondaryIndexAction) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type CreateGlobalTableInput added in v1.12.36

type CreateGlobalTableInput struct {

	// The global table name.
	//
	// GlobalTableName is a required field
	GlobalTableName *string `min:"3" type:"string" required:"true"`

	// The regions where the global table needs to be created.
	//
	// ReplicationGroup is a required field
	ReplicationGroup []*Replica `type:"list" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateGlobalTableInput

func (CreateGlobalTableInput) GoString added in v1.12.36

func (s CreateGlobalTableInput) GoString() string

GoString returns the string representation

func (*CreateGlobalTableInput) SetGlobalTableName added in v1.12.36

func (s *CreateGlobalTableInput) SetGlobalTableName(v string) *CreateGlobalTableInput

SetGlobalTableName sets the GlobalTableName field's value.

func (*CreateGlobalTableInput) SetReplicationGroup added in v1.12.36

func (s *CreateGlobalTableInput) SetReplicationGroup(v []*Replica) *CreateGlobalTableInput

SetReplicationGroup sets the ReplicationGroup field's value.

func (CreateGlobalTableInput) String added in v1.12.36

func (s CreateGlobalTableInput) String() string

String returns the string representation

func (*CreateGlobalTableInput) Validate added in v1.12.36

func (s *CreateGlobalTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateGlobalTableOutput added in v1.12.36

type CreateGlobalTableOutput struct {

	// Contains the details of the global table.
	GlobalTableDescription *GlobalTableDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateGlobalTableOutput

func (CreateGlobalTableOutput) GoString added in v1.12.36

func (s CreateGlobalTableOutput) GoString() string

GoString returns the string representation

func (*CreateGlobalTableOutput) SetGlobalTableDescription added in v1.12.36

SetGlobalTableDescription sets the GlobalTableDescription field's value.

func (CreateGlobalTableOutput) String added in v1.12.36

func (s CreateGlobalTableOutput) String() string

String returns the string representation

type CreateReplicaAction added in v1.12.36

type CreateReplicaAction struct {

	// The region of the replica to be added.
	//
	// RegionName is a required field
	RegionName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents a replica to be added. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateReplicaAction

func (CreateReplicaAction) GoString added in v1.12.36

func (s CreateReplicaAction) GoString() string

GoString returns the string representation

func (*CreateReplicaAction) SetRegionName added in v1.12.36

func (s *CreateReplicaAction) SetRegionName(v string) *CreateReplicaAction

SetRegionName sets the RegionName field's value.

func (CreateReplicaAction) String added in v1.12.36

func (s CreateReplicaAction) String() string

String returns the string representation

func (*CreateReplicaAction) Validate added in v1.12.36

func (s *CreateReplicaAction) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTableInput

type CreateTableInput struct {

	// An array of attributes that describe the key schema for the table and indexes.
	//
	// AttributeDefinitions is a required field
	AttributeDefinitions []*AttributeDefinition `type:"list" required:"true"`

	// One or more global secondary indexes (the maximum is five) to be created
	// on the table. Each global secondary index in the array includes the following:
	//
	//    * IndexName - The name of the global secondary index. Must be unique only
	//    for this table.
	//
	//    * KeySchema - Specifies the key schema for the global secondary index.
	//
	//    * Projection - Specifies attributes that are copied (projected) from the
	//    table into the index. These are in addition to the primary key attributes
	//    and index key attributes, which are automatically projected. Each attribute
	//    specification is composed of:
	//
	//    * ProjectionType - One of the following:
	//
	// KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	// INCLUDE - Only the specified table attributes are projected into the index.
	//    The list of projected attributes are in NonKeyAttributes.
	//
	// ALL - All of the table attributes are projected into the index.
	//
	// NonKeyAttributes - A list of one or more non-key attribute names that are
	//    projected into the secondary index. The total count of attributes provided
	//    in NonKeyAttributes, summed across all of the secondary indexes, must
	//    not exceed 20. If you project the same attribute into two different indexes,
	//    this counts as two distinct attributes when determining the total.
	//
	//    * ProvisionedThroughput - The provisioned throughput settings for the
	//    global secondary index, consisting of read and write capacity units.
	GlobalSecondaryIndexes []*GlobalSecondaryIndex `type:"list"`

	// Specifies the attributes that make up the primary key for a table or an index.
	// The attributes in KeySchema must also be defined in the AttributeDefinitions
	// array. For more information, see Data Model (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// Each KeySchemaElement in the array is composed of:
	//
	//    * AttributeName - The name of this key attribute.
	//
	//    * KeyType - The role that the key attribute will assume:
	//
	// HASH - partition key
	//
	// RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	// For a simple primary key (partition key), you must provide exactly one element
	// with a KeyType of HASH.
	//
	// For a composite primary key (partition key and sort key), you must provide
	// exactly two elements, in this order: The first element must have a KeyType
	// of HASH, and the second element must have a KeyType of RANGE.
	//
	// For more information, see Specifying the Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#WorkingWithTables.primary.key)
	// in the Amazon DynamoDB Developer Guide.
	//
	// KeySchema is a required field
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// One or more local secondary indexes (the maximum is five) to be created on
	// the table. Each index is scoped to a given partition key value. There is
	// a 10 GB size limit per partition key value; otherwise, the size of a local
	// secondary index is unconstrained.
	//
	// Each local secondary index in the array includes the following:
	//
	//    * IndexName - The name of the local secondary index. Must be unique only
	//    for this table.
	//
	//    * KeySchema - Specifies the key schema for the local secondary index.
	//    The key schema must begin with the same partition key as the table.
	//
	//    * Projection - Specifies attributes that are copied (projected) from the
	//    table into the index. These are in addition to the primary key attributes
	//    and index key attributes, which are automatically projected. Each attribute
	//    specification is composed of:
	//
	//    * ProjectionType - One of the following:
	//
	// KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	// INCLUDE - Only the specified table attributes are projected into the index.
	//    The list of projected attributes are in NonKeyAttributes.
	//
	// ALL - All of the table attributes are projected into the index.
	//
	// NonKeyAttributes - A list of one or more non-key attribute names that are
	//    projected into the secondary index. The total count of attributes provided
	//    in NonKeyAttributes, summed across all of the secondary indexes, must
	//    not exceed 20. If you project the same attribute into two different indexes,
	//    this counts as two distinct attributes when determining the total.
	LocalSecondaryIndexes []*LocalSecondaryIndex `type:"list"`

	// Represents the provisioned throughput settings for a specified table or index.
	// The settings can be modified using the UpdateTable operation.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// ProvisionedThroughput is a required field
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`

	// The settings for DynamoDB Streams on the table. These settings consist of:
	//
	//    * StreamEnabled - Indicates whether Streams is to be enabled (true) or
	//    disabled (false).
	//
	//    * StreamViewType - When an item in the table is modified, StreamViewType
	//    determines what information is written to the table's stream. Valid values
	//    for StreamViewType are:
	//
	// KEYS_ONLY - Only the key attributes of the modified item are written to the
	//    stream.
	//
	// NEW_IMAGE - The entire item, as it appears after it was modified, is written
	//    to the stream.
	//
	// OLD_IMAGE - The entire item, as it appeared before it was modified, is written
	//    to the stream.
	//
	// NEW_AND_OLD_IMAGES - Both the new and the old item images of the item are
	//    written to the stream.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The name of the table to create.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a CreateTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTableInput

func (CreateTableInput) GoString added in v0.6.5

func (s CreateTableInput) GoString() string

GoString returns the string representation

func (*CreateTableInput) SetAttributeDefinitions added in v1.5.0

func (s *CreateTableInput) SetAttributeDefinitions(v []*AttributeDefinition) *CreateTableInput

SetAttributeDefinitions sets the AttributeDefinitions field's value.

func (*CreateTableInput) SetGlobalSecondaryIndexes added in v1.5.0

func (s *CreateTableInput) SetGlobalSecondaryIndexes(v []*GlobalSecondaryIndex) *CreateTableInput

SetGlobalSecondaryIndexes sets the GlobalSecondaryIndexes field's value.

func (*CreateTableInput) SetKeySchema added in v1.5.0

func (s *CreateTableInput) SetKeySchema(v []*KeySchemaElement) *CreateTableInput

SetKeySchema sets the KeySchema field's value.

func (*CreateTableInput) SetLocalSecondaryIndexes added in v1.5.0

func (s *CreateTableInput) SetLocalSecondaryIndexes(v []*LocalSecondaryIndex) *CreateTableInput

SetLocalSecondaryIndexes sets the LocalSecondaryIndexes field's value.

func (*CreateTableInput) SetProvisionedThroughput added in v1.5.0

func (s *CreateTableInput) SetProvisionedThroughput(v *ProvisionedThroughput) *CreateTableInput

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (*CreateTableInput) SetStreamSpecification added in v1.5.0

func (s *CreateTableInput) SetStreamSpecification(v *StreamSpecification) *CreateTableInput

SetStreamSpecification sets the StreamSpecification field's value.

func (*CreateTableInput) SetTableName added in v1.5.0

func (s *CreateTableInput) SetTableName(v string) *CreateTableInput

SetTableName sets the TableName field's value.

func (CreateTableInput) String added in v0.6.5

func (s CreateTableInput) String() string

String returns the string representation

func (*CreateTableInput) Validate added in v1.1.21

func (s *CreateTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTableOutput

type CreateTableOutput struct {

	// Represents the properties of the table.
	TableDescription *TableDescription `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a CreateTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTableOutput

func (CreateTableOutput) GoString added in v0.6.5

func (s CreateTableOutput) GoString() string

GoString returns the string representation

func (*CreateTableOutput) SetTableDescription added in v1.5.0

func (s *CreateTableOutput) SetTableDescription(v *TableDescription) *CreateTableOutput

SetTableDescription sets the TableDescription field's value.

func (CreateTableOutput) String added in v0.6.5

func (s CreateTableOutput) String() string

String returns the string representation

type DeleteBackupInput added in v1.12.36

type DeleteBackupInput struct {

	// The ARN associated with the backup.
	//
	// BackupArn is a required field
	BackupArn *string `min:"37" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteBackupInput

func (DeleteBackupInput) GoString added in v1.12.36

func (s DeleteBackupInput) GoString() string

GoString returns the string representation

func (*DeleteBackupInput) SetBackupArn added in v1.12.36

func (s *DeleteBackupInput) SetBackupArn(v string) *DeleteBackupInput

SetBackupArn sets the BackupArn field's value.

func (DeleteBackupInput) String added in v1.12.36

func (s DeleteBackupInput) String() string

String returns the string representation

func (*DeleteBackupInput) Validate added in v1.12.36

func (s *DeleteBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteBackupOutput added in v1.12.36

type DeleteBackupOutput struct {

	// Contains the description of the backup created for the table.
	BackupDescription *BackupDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteBackupOutput

func (DeleteBackupOutput) GoString added in v1.12.36

func (s DeleteBackupOutput) GoString() string

GoString returns the string representation

func (*DeleteBackupOutput) SetBackupDescription added in v1.12.36

func (s *DeleteBackupOutput) SetBackupDescription(v *BackupDescription) *DeleteBackupOutput

SetBackupDescription sets the BackupDescription field's value.

func (DeleteBackupOutput) String added in v1.12.36

func (s DeleteBackupOutput) String() string

String returns the string representation

type DeleteGlobalSecondaryIndexAction

type DeleteGlobalSecondaryIndexAction struct {

	// The name of the global secondary index to be deleted.
	//
	// IndexName is a required field
	IndexName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents a global secondary index to be deleted from an existing table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteGlobalSecondaryIndexAction

func (DeleteGlobalSecondaryIndexAction) GoString added in v0.6.5

GoString returns the string representation

func (*DeleteGlobalSecondaryIndexAction) SetIndexName added in v1.5.0

SetIndexName sets the IndexName field's value.

func (DeleteGlobalSecondaryIndexAction) String added in v0.6.5

String returns the string representation

func (*DeleteGlobalSecondaryIndexAction) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DeleteItemInput

type DeleteItemInput struct {

	// A condition that must be satisfied in order for a conditional DeleteItem
	// to succeed.
	//
	// An expression can contain any of the following:
	//
	//    * Functions: attribute_exists | attribute_not_exists | attribute_type
	//    | contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//    * Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN
	//
	//    *  Logical operators: AND | OR | NOT
	//
	// For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see ConditionalOperator (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see Expected (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html)
	// in the Amazon DynamoDB Developer Guide.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	// Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	// { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	// ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A map of attribute names to AttributeValue objects, representing the primary
	// key of the item to delete.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	//
	// Key is a required field
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appeared
	// before they were deleted. For DeleteItem, the valid values are:
	//
	//    * NONE - If ReturnValues is not specified, or if its value is NONE, then
	//    nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    * ALL_OLD - The content of the old item is returned.
	//
	// The ReturnValues parameter is used by several DynamoDB operations; however,
	// DeleteItem does not recognize any values other than NONE or ALL_OLD.
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table from which to delete the item.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a DeleteItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteItemInput

func (DeleteItemInput) GoString added in v0.6.5

func (s DeleteItemInput) GoString() string

GoString returns the string representation

func (*DeleteItemInput) SetConditionExpression added in v1.5.0

func (s *DeleteItemInput) SetConditionExpression(v string) *DeleteItemInput

SetConditionExpression sets the ConditionExpression field's value.

func (*DeleteItemInput) SetConditionalOperator added in v1.5.0

func (s *DeleteItemInput) SetConditionalOperator(v string) *DeleteItemInput

SetConditionalOperator sets the ConditionalOperator field's value.

func (*DeleteItemInput) SetExpected added in v1.5.0

SetExpected sets the Expected field's value.

func (*DeleteItemInput) SetExpressionAttributeNames added in v1.5.0

func (s *DeleteItemInput) SetExpressionAttributeNames(v map[string]*string) *DeleteItemInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*DeleteItemInput) SetExpressionAttributeValues added in v1.5.0

func (s *DeleteItemInput) SetExpressionAttributeValues(v map[string]*AttributeValue) *DeleteItemInput

SetExpressionAttributeValues sets the ExpressionAttributeValues field's value.

func (*DeleteItemInput) SetKey added in v1.5.0

SetKey sets the Key field's value.

func (*DeleteItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *DeleteItemInput) SetReturnConsumedCapacity(v string) *DeleteItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*DeleteItemInput) SetReturnItemCollectionMetrics added in v1.5.0

func (s *DeleteItemInput) SetReturnItemCollectionMetrics(v string) *DeleteItemInput

SetReturnItemCollectionMetrics sets the ReturnItemCollectionMetrics field's value.

func (*DeleteItemInput) SetReturnValues added in v1.5.0

func (s *DeleteItemInput) SetReturnValues(v string) *DeleteItemInput

SetReturnValues sets the ReturnValues field's value.

func (*DeleteItemInput) SetTableName added in v1.5.0

func (s *DeleteItemInput) SetTableName(v string) *DeleteItemInput

SetTableName sets the TableName field's value.

func (DeleteItemInput) String added in v0.6.5

func (s DeleteItemInput) String() string

String returns the string representation

func (*DeleteItemInput) Validate added in v1.1.21

func (s *DeleteItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteItemOutput

type DeleteItemOutput struct {

	// A map of attribute names to AttributeValue objects, representing the item
	// as it appeared before the DeleteItem operation. This map appears in the response
	// only if ReturnValues was specified as ALL_OLD in the request.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by the DeleteItem operation. The data returned
	// includes the total provisioned throughput consumed, along with statistics
	// for the table and any indexes involved in the operation. ConsumedCapacity
	// is only returned if the ReturnConsumedCapacity parameter was specified. For
	// more information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the DeleteItem
	// operation. ItemCollectionMetrics is only returned if the ReturnItemCollectionMetrics
	// parameter was specified. If the table does not have any local secondary indexes,
	// this information is not returned in the response.
	//
	// Each ItemCollectionMetrics element consists of:
	//
	//    * ItemCollectionKey - The partition key value of the item collection.
	//    This is the same as the partition key value of the item itself.
	//
	//    * SizeEstimateRangeGB - An estimate of item collection size, in gigabytes.
	//    This value is a two-element array containing a lower bound and an upper
	//    bound for the estimate. The estimate includes the size of all the items
	//    in the table, plus the size of all attributes projected into all of the
	//    local secondary indexes on that table. Use this estimate to measure whether
	//    a local secondary index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	//    precision or accuracy of the estimate.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a DeleteItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteItemOutput

func (DeleteItemOutput) GoString added in v0.6.5

func (s DeleteItemOutput) GoString() string

GoString returns the string representation

func (*DeleteItemOutput) SetAttributes added in v1.5.0

func (s *DeleteItemOutput) SetAttributes(v map[string]*AttributeValue) *DeleteItemOutput

SetAttributes sets the Attributes field's value.

func (*DeleteItemOutput) SetConsumedCapacity added in v1.5.0

func (s *DeleteItemOutput) SetConsumedCapacity(v *ConsumedCapacity) *DeleteItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*DeleteItemOutput) SetItemCollectionMetrics added in v1.5.0

func (s *DeleteItemOutput) SetItemCollectionMetrics(v *ItemCollectionMetrics) *DeleteItemOutput

SetItemCollectionMetrics sets the ItemCollectionMetrics field's value.

func (DeleteItemOutput) String added in v0.6.5

func (s DeleteItemOutput) String() string

String returns the string representation

type DeleteReplicaAction added in v1.12.36

type DeleteReplicaAction struct {

	// The region of the replica to be removed.
	//
	// RegionName is a required field
	RegionName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents a replica to be removed. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteReplicaAction

func (DeleteReplicaAction) GoString added in v1.12.36

func (s DeleteReplicaAction) GoString() string

GoString returns the string representation

func (*DeleteReplicaAction) SetRegionName added in v1.12.36

func (s *DeleteReplicaAction) SetRegionName(v string) *DeleteReplicaAction

SetRegionName sets the RegionName field's value.

func (DeleteReplicaAction) String added in v1.12.36

func (s DeleteReplicaAction) String() string

String returns the string representation

func (*DeleteReplicaAction) Validate added in v1.12.36

func (s *DeleteReplicaAction) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRequest

type DeleteRequest struct {

	// A map of attribute name to attribute values, representing the primary key
	// of the item to delete. All of the table's primary key attributes must be
	// specified, and their data types must match those of the table's key schema.
	//
	// Key is a required field
	Key map[string]*AttributeValue `type:"map" required:"true"`
	// contains filtered or unexported fields
}

Represents a request to perform a DeleteItem operation on an item. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteRequest

func (DeleteRequest) GoString added in v0.6.5

func (s DeleteRequest) GoString() string

GoString returns the string representation

func (*DeleteRequest) SetKey added in v1.5.0

func (s *DeleteRequest) SetKey(v map[string]*AttributeValue) *DeleteRequest

SetKey sets the Key field's value.

func (DeleteRequest) String added in v0.6.5

func (s DeleteRequest) String() string

String returns the string representation

type DeleteTableInput

type DeleteTableInput struct {

	// The name of the table to delete.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a DeleteTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteTableInput

func (DeleteTableInput) GoString added in v0.6.5

func (s DeleteTableInput) GoString() string

GoString returns the string representation

func (*DeleteTableInput) SetTableName added in v1.5.0

func (s *DeleteTableInput) SetTableName(v string) *DeleteTableInput

SetTableName sets the TableName field's value.

func (DeleteTableInput) String added in v0.6.5

func (s DeleteTableInput) String() string

String returns the string representation

func (*DeleteTableInput) Validate added in v1.1.21

func (s *DeleteTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTableOutput

type DeleteTableOutput struct {

	// Represents the properties of a table.
	TableDescription *TableDescription `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a DeleteTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteTableOutput

func (DeleteTableOutput) GoString added in v0.6.5

func (s DeleteTableOutput) GoString() string

GoString returns the string representation

func (*DeleteTableOutput) SetTableDescription added in v1.5.0

func (s *DeleteTableOutput) SetTableDescription(v *TableDescription) *DeleteTableOutput

SetTableDescription sets the TableDescription field's value.

func (DeleteTableOutput) String added in v0.6.5

func (s DeleteTableOutput) String() string

String returns the string representation

type DescribeBackupInput added in v1.12.36

type DescribeBackupInput struct {

	// The ARN associated with the backup.
	//
	// BackupArn is a required field
	BackupArn *string `min:"37" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeBackupInput

func (DescribeBackupInput) GoString added in v1.12.36

func (s DescribeBackupInput) GoString() string

GoString returns the string representation

func (*DescribeBackupInput) SetBackupArn added in v1.12.36

func (s *DescribeBackupInput) SetBackupArn(v string) *DescribeBackupInput

SetBackupArn sets the BackupArn field's value.

func (DescribeBackupInput) String added in v1.12.36

func (s DescribeBackupInput) String() string

String returns the string representation

func (*DescribeBackupInput) Validate added in v1.12.36

func (s *DescribeBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeBackupOutput added in v1.12.36

type DescribeBackupOutput struct {

	// Contains the description of the backup created for the table.
	BackupDescription *BackupDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeBackupOutput

func (DescribeBackupOutput) GoString added in v1.12.36

func (s DescribeBackupOutput) GoString() string

GoString returns the string representation

func (*DescribeBackupOutput) SetBackupDescription added in v1.12.36

func (s *DescribeBackupOutput) SetBackupDescription(v *BackupDescription) *DescribeBackupOutput

SetBackupDescription sets the BackupDescription field's value.

func (DescribeBackupOutput) String added in v1.12.36

func (s DescribeBackupOutput) String() string

String returns the string representation

type DescribeContinuousBackupsInput added in v1.12.36

type DescribeContinuousBackupsInput struct {

	// Name of the table for which the customer wants to check the backup and restore
	// settings.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeContinuousBackupsInput

func (DescribeContinuousBackupsInput) GoString added in v1.12.36

GoString returns the string representation

func (*DescribeContinuousBackupsInput) SetTableName added in v1.12.36

SetTableName sets the TableName field's value.

func (DescribeContinuousBackupsInput) String added in v1.12.36

String returns the string representation

func (*DescribeContinuousBackupsInput) Validate added in v1.12.36

func (s *DescribeContinuousBackupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeContinuousBackupsOutput added in v1.12.36

type DescribeContinuousBackupsOutput struct {

	// ContinuousBackupsDescription can be one of the following : ENABLED, DISABLED.
	ContinuousBackupsDescription *ContinuousBackupsDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeContinuousBackupsOutput

func (DescribeContinuousBackupsOutput) GoString added in v1.12.36

GoString returns the string representation

func (*DescribeContinuousBackupsOutput) SetContinuousBackupsDescription added in v1.12.36

SetContinuousBackupsDescription sets the ContinuousBackupsDescription field's value.

func (DescribeContinuousBackupsOutput) String added in v1.12.36

String returns the string representation

type DescribeGlobalTableInput added in v1.12.36

type DescribeGlobalTableInput struct {

	// The name of the global table.
	//
	// GlobalTableName is a required field
	GlobalTableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeGlobalTableInput

func (DescribeGlobalTableInput) GoString added in v1.12.36

func (s DescribeGlobalTableInput) GoString() string

GoString returns the string representation

func (*DescribeGlobalTableInput) SetGlobalTableName added in v1.12.36

func (s *DescribeGlobalTableInput) SetGlobalTableName(v string) *DescribeGlobalTableInput

SetGlobalTableName sets the GlobalTableName field's value.

func (DescribeGlobalTableInput) String added in v1.12.36

func (s DescribeGlobalTableInput) String() string

String returns the string representation

func (*DescribeGlobalTableInput) Validate added in v1.12.36

func (s *DescribeGlobalTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeGlobalTableOutput added in v1.12.36

type DescribeGlobalTableOutput struct {

	// Contains the details of the global table.
	GlobalTableDescription *GlobalTableDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeGlobalTableOutput

func (DescribeGlobalTableOutput) GoString added in v1.12.36

func (s DescribeGlobalTableOutput) GoString() string

GoString returns the string representation

func (*DescribeGlobalTableOutput) SetGlobalTableDescription added in v1.12.36

SetGlobalTableDescription sets the GlobalTableDescription field's value.

func (DescribeGlobalTableOutput) String added in v1.12.36

func (s DescribeGlobalTableOutput) String() string

String returns the string representation

type DescribeLimitsInput added in v1.1.8

type DescribeLimitsInput struct {
	// contains filtered or unexported fields
}

Represents the input of a DescribeLimits operation. Has no content. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeLimitsInput

func (DescribeLimitsInput) GoString added in v1.1.8

func (s DescribeLimitsInput) GoString() string

GoString returns the string representation

func (DescribeLimitsInput) String added in v1.1.8

func (s DescribeLimitsInput) String() string

String returns the string representation

type DescribeLimitsOutput added in v1.1.8

type DescribeLimitsOutput struct {

	// The maximum total read capacity units that your account allows you to provision
	// across all of your tables in this region.
	AccountMaxReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum total write capacity units that your account allows you to provision
	// across all of your tables in this region.
	AccountMaxWriteCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum read capacity units that your account allows you to provision
	// for a new table that you are creating in this region, including the read
	// capacity units provisioned for its global secondary indexes (GSIs).
	TableMaxReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum write capacity units that your account allows you to provision
	// for a new table that you are creating in this region, including the write
	// capacity units provisioned for its global secondary indexes (GSIs).
	TableMaxWriteCapacityUnits *int64 `min:"1" type:"long"`
	// contains filtered or unexported fields
}

Represents the output of a DescribeLimits operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeLimitsOutput

func (DescribeLimitsOutput) GoString added in v1.1.8

func (s DescribeLimitsOutput) GoString() string

GoString returns the string representation

func (*DescribeLimitsOutput) SetAccountMaxReadCapacityUnits added in v1.5.0

func (s *DescribeLimitsOutput) SetAccountMaxReadCapacityUnits(v int64) *DescribeLimitsOutput

SetAccountMaxReadCapacityUnits sets the AccountMaxReadCapacityUnits field's value.

func (*DescribeLimitsOutput) SetAccountMaxWriteCapacityUnits added in v1.5.0

func (s *DescribeLimitsOutput) SetAccountMaxWriteCapacityUnits(v int64) *DescribeLimitsOutput

SetAccountMaxWriteCapacityUnits sets the AccountMaxWriteCapacityUnits field's value.

func (*DescribeLimitsOutput) SetTableMaxReadCapacityUnits added in v1.5.0

func (s *DescribeLimitsOutput) SetTableMaxReadCapacityUnits(v int64) *DescribeLimitsOutput

SetTableMaxReadCapacityUnits sets the TableMaxReadCapacityUnits field's value.

func (*DescribeLimitsOutput) SetTableMaxWriteCapacityUnits added in v1.5.0

func (s *DescribeLimitsOutput) SetTableMaxWriteCapacityUnits(v int64) *DescribeLimitsOutput

SetTableMaxWriteCapacityUnits sets the TableMaxWriteCapacityUnits field's value.

func (DescribeLimitsOutput) String added in v1.1.8

func (s DescribeLimitsOutput) String() string

String returns the string representation

type DescribeTableInput

type DescribeTableInput struct {

	// The name of the table to describe.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a DescribeTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTableInput

func (DescribeTableInput) GoString added in v0.6.5

func (s DescribeTableInput) GoString() string

GoString returns the string representation

func (*DescribeTableInput) SetTableName added in v1.5.0

func (s *DescribeTableInput) SetTableName(v string) *DescribeTableInput

SetTableName sets the TableName field's value.

func (DescribeTableInput) String added in v0.6.5

func (s DescribeTableInput) String() string

String returns the string representation

func (*DescribeTableInput) Validate added in v1.1.21

func (s *DescribeTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTableOutput

type DescribeTableOutput struct {

	// The properties of the table.
	Table *TableDescription `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a DescribeTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTableOutput

func (DescribeTableOutput) GoString added in v0.6.5

func (s DescribeTableOutput) GoString() string

GoString returns the string representation

func (*DescribeTableOutput) SetTable added in v1.5.0

SetTable sets the Table field's value.

func (DescribeTableOutput) String added in v0.6.5

func (s DescribeTableOutput) String() string

String returns the string representation

type DescribeTimeToLiveInput added in v1.7.2

type DescribeTimeToLiveInput struct {

	// The name of the table to be described.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTimeToLiveInput

func (DescribeTimeToLiveInput) GoString added in v1.7.2

func (s DescribeTimeToLiveInput) GoString() string

GoString returns the string representation

func (*DescribeTimeToLiveInput) SetTableName added in v1.7.2

SetTableName sets the TableName field's value.

func (DescribeTimeToLiveInput) String added in v1.7.2

func (s DescribeTimeToLiveInput) String() string

String returns the string representation

func (*DescribeTimeToLiveInput) Validate added in v1.7.2

func (s *DescribeTimeToLiveInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTimeToLiveOutput added in v1.7.2

type DescribeTimeToLiveOutput struct {

	// The description of the Time to Live (TTL) status on the specified table.
	TimeToLiveDescription *TimeToLiveDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTimeToLiveOutput

func (DescribeTimeToLiveOutput) GoString added in v1.7.2

func (s DescribeTimeToLiveOutput) GoString() string

GoString returns the string representation

func (*DescribeTimeToLiveOutput) SetTimeToLiveDescription added in v1.7.2

SetTimeToLiveDescription sets the TimeToLiveDescription field's value.

func (DescribeTimeToLiveOutput) String added in v1.7.2

func (s DescribeTimeToLiveOutput) String() string

String returns the string representation

type DynamoDB

type DynamoDB struct {
	*client.Client
}

DynamoDB provides the API operation methods for making requests to Amazon DynamoDB. See this package's package overview docs for details on the service.

DynamoDB methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *DynamoDB

New creates a new instance of the DynamoDB client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a DynamoDB client from just a session.
svc := dynamodb.New(mySession)

// Create a DynamoDB client with additional configuration
svc := dynamodb.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*DynamoDB) BatchGetItem

func (c *DynamoDB) BatchGetItem(input *BatchGetItemInput) (*BatchGetItemOutput, error)

BatchGetItem API operation for Amazon DynamoDB.

The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.

A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem will return a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.

If you request more than 100 items BatchGetItem will return a ValidationException with the message "Too many items requested for the BatchGetItem call".

For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one data set.

If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem will return a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.

If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.

For more information, see Batch Operations and Error Handling (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations) in the Amazon DynamoDB Developer Guide.

By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.

In order to minimize response latency, BatchGetItem retrieves items in parallel.

When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.

If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Capacity Units Calculations (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#CapacityUnitCalculations) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation BatchGetItem for usage and error information.

Returned Error Codes:

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchGetItem

Example (Shared00)

To retrieve multiple items from a table

This example reads multiple items from the Music table using a batch of three GetItem requests. Only the AlbumTitle attribute is returned.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.BatchGetItemInput{
		RequestItems: map[string]*dynamodb.KeysAndAttributes{
			"Music": {
				Keys: []map[string]*dynamodb.AttributeValue{
					{
						"Artist": &dynamodb.AttributeValue{
							S: aws.String("No One You Know"),
						},
						"SongTitle": &dynamodb.AttributeValue{
							S: aws.String("Call Me Today"),
						},
					},
					{
						"Artist": &dynamodb.AttributeValue{
							S: aws.String("Acme Band"),
						},
						"SongTitle": &dynamodb.AttributeValue{
							S: aws.String("Happy Day"),
						},
					},
					{
						"Artist": &dynamodb.AttributeValue{
							S: aws.String("No One You Know"),
						},
						"SongTitle": &dynamodb.AttributeValue{
							S: aws.String("Scared of My Shadow"),
						},
					},
				},
				ProjectionExpression: aws.String("AlbumTitle"),
			},
		},
	}

	result, err := svc.BatchGetItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) BatchGetItemPages

func (c *DynamoDB) BatchGetItemPages(input *BatchGetItemInput, fn func(*BatchGetItemOutput, bool) bool) error

BatchGetItemPages iterates over the pages of a BatchGetItem operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See BatchGetItem method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a BatchGetItem operation.
pageNum := 0
err := client.BatchGetItemPages(params,
    func(page *BatchGetItemOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*DynamoDB) BatchGetItemPagesWithContext added in v1.8.0

func (c *DynamoDB) BatchGetItemPagesWithContext(ctx aws.Context, input *BatchGetItemInput, fn func(*BatchGetItemOutput, bool) bool, opts ...request.Option) error

BatchGetItemPagesWithContext same as BatchGetItemPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) BatchGetItemRequest

func (c *DynamoDB) BatchGetItemRequest(input *BatchGetItemInput) (req *request.Request, output *BatchGetItemOutput)

BatchGetItemRequest generates a "aws/request.Request" representing the client's request for the BatchGetItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See BatchGetItem for more information on using the BatchGetItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the BatchGetItemRequest method.
req, resp := client.BatchGetItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchGetItem

func (*DynamoDB) BatchGetItemWithContext added in v1.8.0

func (c *DynamoDB) BatchGetItemWithContext(ctx aws.Context, input *BatchGetItemInput, opts ...request.Option) (*BatchGetItemOutput, error)

BatchGetItemWithContext is the same as BatchGetItem with the addition of the ability to pass a context and additional request options.

See BatchGetItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) BatchWriteItem

func (c *DynamoDB) BatchWriteItem(input *BatchWriteItemInput) (*BatchWriteItemOutput, error)

BatchWriteItem API operation for Amazon DynamoDB.

The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can write up to 16 MB of data, which can comprise as many as 25 put or delete requests. Individual items to be written can be as large as 400 KB.

BatchWriteItem cannot update items. To update items, use the UpdateItem action.

The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.

Note that if none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchWriteItem will return a ProvisionedThroughputExceededException.

If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.

For more information, see Batch Operations and Error Handling (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations) in the Amazon DynamoDB Developer Guide.

With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon Elastic MapReduce (EMR), or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would. For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.

If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, BatchWriteItem performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.

Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.

If one or more of the following is true, DynamoDB rejects the entire batch write operation:

  • One or more tables specified in the BatchWriteItem request does not exist.

  • Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.

  • You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.

  • There are more than 25 requests in the batch.

  • Any individual item in a batch exceeds 400 KB.

  • The total request size exceeds 16 MB.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation BatchWriteItem for usage and error information.

Returned Error Codes:

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeItemCollectionSizeLimitExceededException "ItemCollectionSizeLimitExceededException" An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchWriteItem

Example (Shared00)

To add multiple items to a table

This example adds three new items to the Music table using a batch of three PutItem requests.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.BatchWriteItemInput{
		RequestItems: map[string][]*dynamodb.WriteRequest{
			"Music": {
				{
					PutRequest: &dynamodb.PutRequest{
						Item: map[string]*dynamodb.AttributeValue{
							"AlbumTitle": {
								S: aws.String("Somewhat Famous"),
							},
							"Artist": {
								S: aws.String("No One You Know"),
							},
							"SongTitle": {
								S: aws.String("Call Me Today"),
							},
						},
					},
				},
				{
					PutRequest: &dynamodb.PutRequest{
						Item: map[string]*dynamodb.AttributeValue{
							"AlbumTitle": {
								S: aws.String("Songs About Life"),
							},
							"Artist": {
								S: aws.String("Acme Band"),
							},
							"SongTitle": {
								S: aws.String("Happy Day"),
							},
						},
					},
				},
				{
					PutRequest: &dynamodb.PutRequest{
						Item: map[string]*dynamodb.AttributeValue{
							"AlbumTitle": {
								S: aws.String("Blue Sky Blues"),
							},
							"Artist": {
								S: aws.String("No One You Know"),
							},
							"SongTitle": {
								S: aws.String("Scared of My Shadow"),
							},
						},
					},
				},
			},
		},
	}

	result, err := svc.BatchWriteItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeItemCollectionSizeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeItemCollectionSizeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) BatchWriteItemRequest

func (c *DynamoDB) BatchWriteItemRequest(input *BatchWriteItemInput) (req *request.Request, output *BatchWriteItemOutput)

BatchWriteItemRequest generates a "aws/request.Request" representing the client's request for the BatchWriteItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See BatchWriteItem for more information on using the BatchWriteItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the BatchWriteItemRequest method.
req, resp := client.BatchWriteItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/BatchWriteItem

func (*DynamoDB) BatchWriteItemWithContext added in v1.8.0

func (c *DynamoDB) BatchWriteItemWithContext(ctx aws.Context, input *BatchWriteItemInput, opts ...request.Option) (*BatchWriteItemOutput, error)

BatchWriteItemWithContext is the same as BatchWriteItem with the addition of the ability to pass a context and additional request options.

See BatchWriteItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) CreateBackup added in v1.12.36

func (c *DynamoDB) CreateBackup(input *CreateBackupInput) (*CreateBackupOutput, error)

CreateBackup API operation for Amazon DynamoDB.

Creates a backup for an existing table.

Each time you create an On-Demand Backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken.

You can call CreateBackup at a maximum rate of 50 times per second.

All backups in DynamoDB work without consuming any provisioned throughput on the table. This results in a fast, low-cost, and scalable backup process. In general, the larger the table, the more time it takes to back up. The backup is stored in an S3 data store that is maintained and managed by DynamoDB.

Backups incorporate all writes (delete, put, update) that were completed within the last minute before the backup request was initiated. Backups might include some writes (delete, put, update) that were completed before the backup request was finished.

For example, if you submit the backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup may or may not contain data modifications made between 14:24:00 and 14:26:00. On-Demand Backup does not support causal consistency.

Along with data, the following are also included on the backups:

  • Global secondary indexes (GSIs)

  • Local secondary indexes (LSIs)

  • Streams

  • Provisioned read and write capacity

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation CreateBackup for usage and error information.

Returned Error Codes:

  • ErrCodeTableNotFoundException "TableNotFoundException" A table with the name TableName does not currently exist within the subscriber's account.

  • ErrCodeTableInUseException "TableInUseException" A table by that name is either being created or deleted.

  • ErrCodeContinuousBackupsUnavailableException "ContinuousBackupsUnavailableException" Backups have not yet been enabled for this table.

  • ErrCodeBackupInUseException "BackupInUseException" There is another ongoing conflicting backup control plane operation on the table. The backups is either being created, deleted or restored to a table.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateBackup

func (*DynamoDB) CreateBackupRequest added in v1.12.36

func (c *DynamoDB) CreateBackupRequest(input *CreateBackupInput) (req *request.Request, output *CreateBackupOutput)

CreateBackupRequest generates a "aws/request.Request" representing the client's request for the CreateBackup operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateBackup for more information on using the CreateBackup API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateBackupRequest method.
req, resp := client.CreateBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateBackup

func (*DynamoDB) CreateBackupWithContext added in v1.12.36

func (c *DynamoDB) CreateBackupWithContext(ctx aws.Context, input *CreateBackupInput, opts ...request.Option) (*CreateBackupOutput, error)

CreateBackupWithContext is the same as CreateBackup with the addition of the ability to pass a context and additional request options.

See CreateBackup for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) CreateGlobalTable added in v1.12.36

func (c *DynamoDB) CreateGlobalTable(input *CreateGlobalTableInput) (*CreateGlobalTableOutput, error)

CreateGlobalTable API operation for Amazon DynamoDB.

Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided regions.

Tables can only be added as the replicas of a global table group under the following conditions:

  • The tables must have the same name.

  • The tables must contain no items.

  • The tables must have the same hash key and sort key (if present).

  • The tables must have DynamoDB Streams enabled (NEW_AND_OLD_IMAGES).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation CreateGlobalTable for usage and error information.

Returned Error Codes:

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

  • ErrCodeGlobalTableAlreadyExistsException "GlobalTableAlreadyExistsException" The specified global table already exists.

  • ErrCodeTableNotFoundException "TableNotFoundException" A table with the name TableName does not currently exist within the subscriber's account.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateGlobalTable

func (*DynamoDB) CreateGlobalTableRequest added in v1.12.36

func (c *DynamoDB) CreateGlobalTableRequest(input *CreateGlobalTableInput) (req *request.Request, output *CreateGlobalTableOutput)

CreateGlobalTableRequest generates a "aws/request.Request" representing the client's request for the CreateGlobalTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateGlobalTable for more information on using the CreateGlobalTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateGlobalTableRequest method.
req, resp := client.CreateGlobalTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateGlobalTable

func (*DynamoDB) CreateGlobalTableWithContext added in v1.12.36

func (c *DynamoDB) CreateGlobalTableWithContext(ctx aws.Context, input *CreateGlobalTableInput, opts ...request.Option) (*CreateGlobalTableOutput, error)

CreateGlobalTableWithContext is the same as CreateGlobalTable with the addition of the ability to pass a context and additional request options.

See CreateGlobalTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) CreateTable

func (c *DynamoDB) CreateTable(input *CreateTableInput) (*CreateTableOutput, error)

CreateTable API operation for Amazon DynamoDB.

The CreateTable operation adds a new table to your account. In an AWS account, table names must be unique within each region. That is, you can have two tables with same name if you create the tables in different regions.

CreateTable is an asynchronous operation. Upon receiving a CreateTable request, DynamoDB immediately returns a response with a TableStatus of CREATING. After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write operations only on an ACTIVE table.

You can optionally define secondary indexes on the new table, as part of the CreateTable operation. If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially. Only one table with secondary indexes can be in the CREATING state at any given time.

You can use the DescribeTable action to check the table status.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation CreateTable for usage and error information.

Returned Error Codes:

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTable

Example (Shared00)

To create a table

This example creates a table named Music.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.CreateTableInput{
		AttributeDefinitions: []*dynamodb.AttributeDefinition{
			{
				AttributeName: aws.String("Artist"),
				AttributeType: aws.String("S"),
			},
			{
				AttributeName: aws.String("SongTitle"),
				AttributeType: aws.String("S"),
			},
		},
		KeySchema: []*dynamodb.KeySchemaElement{
			{
				AttributeName: aws.String("Artist"),
				KeyType:       aws.String("HASH"),
			},
			{
				AttributeName: aws.String("SongTitle"),
				KeyType:       aws.String("RANGE"),
			},
		},
		ProvisionedThroughput: &dynamodb.ProvisionedThroughput{
			ReadCapacityUnits:  aws.Int64(5),
			WriteCapacityUnits: aws.Int64(5),
		},
		TableName: aws.String("Music"),
	}

	result, err := svc.CreateTable(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeResourceInUseException:
				fmt.Println(dynamodb.ErrCodeResourceInUseException, aerr.Error())
			case dynamodb.ErrCodeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) CreateTableRequest

func (c *DynamoDB) CreateTableRequest(input *CreateTableInput) (req *request.Request, output *CreateTableOutput)

CreateTableRequest generates a "aws/request.Request" representing the client's request for the CreateTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateTable for more information on using the CreateTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateTableRequest method.
req, resp := client.CreateTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTable

func (*DynamoDB) CreateTableWithContext added in v1.8.0

func (c *DynamoDB) CreateTableWithContext(ctx aws.Context, input *CreateTableInput, opts ...request.Option) (*CreateTableOutput, error)

CreateTableWithContext is the same as CreateTable with the addition of the ability to pass a context and additional request options.

See CreateTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DeleteBackup added in v1.12.36

func (c *DynamoDB) DeleteBackup(input *DeleteBackupInput) (*DeleteBackupOutput, error)

DeleteBackup API operation for Amazon DynamoDB.

Deletes an existing backup of a table.

You can call DeleteBackup at a maximum rate of 10 times per second.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DeleteBackup for usage and error information.

Returned Error Codes:

  • ErrCodeBackupNotFoundException "BackupNotFoundException" Backup not found for the given BackupARN.

  • ErrCodeBackupInUseException "BackupInUseException" There is another ongoing conflicting backup control plane operation on the table. The backups is either being created, deleted or restored to a table.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteBackup

func (*DynamoDB) DeleteBackupRequest added in v1.12.36

func (c *DynamoDB) DeleteBackupRequest(input *DeleteBackupInput) (req *request.Request, output *DeleteBackupOutput)

DeleteBackupRequest generates a "aws/request.Request" representing the client's request for the DeleteBackup operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteBackup for more information on using the DeleteBackup API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteBackupRequest method.
req, resp := client.DeleteBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteBackup

func (*DynamoDB) DeleteBackupWithContext added in v1.12.36

func (c *DynamoDB) DeleteBackupWithContext(ctx aws.Context, input *DeleteBackupInput, opts ...request.Option) (*DeleteBackupOutput, error)

DeleteBackupWithContext is the same as DeleteBackup with the addition of the ability to pass a context and additional request options.

See DeleteBackup for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DeleteItem

func (c *DynamoDB) DeleteItem(input *DeleteItemInput) (*DeleteItemOutput, error)

DeleteItem API operation for Amazon DynamoDB.

Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.

In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.

Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.

Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DeleteItem for usage and error information.

Returned Error Codes:

  • ErrCodeConditionalCheckFailedException "ConditionalCheckFailedException" A condition specified in the operation could not be evaluated.

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeItemCollectionSizeLimitExceededException "ItemCollectionSizeLimitExceededException" An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteItem

Example (Shared00)

To delete an item

This example deletes an item from the Music table.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.DeleteItemInput{
		Key: map[string]*dynamodb.AttributeValue{
			"Artist": {
				S: aws.String("No One You Know"),
			},
			"SongTitle": {
				S: aws.String("Scared of My Shadow"),
			},
		},
		TableName: aws.String("Music"),
	}

	result, err := svc.DeleteItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeConditionalCheckFailedException:
				fmt.Println(dynamodb.ErrCodeConditionalCheckFailedException, aerr.Error())
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeItemCollectionSizeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeItemCollectionSizeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) DeleteItemRequest

func (c *DynamoDB) DeleteItemRequest(input *DeleteItemInput) (req *request.Request, output *DeleteItemOutput)

DeleteItemRequest generates a "aws/request.Request" representing the client's request for the DeleteItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteItem for more information on using the DeleteItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteItemRequest method.
req, resp := client.DeleteItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteItem

func (*DynamoDB) DeleteItemWithContext added in v1.8.0

func (c *DynamoDB) DeleteItemWithContext(ctx aws.Context, input *DeleteItemInput, opts ...request.Option) (*DeleteItemOutput, error)

DeleteItemWithContext is the same as DeleteItem with the addition of the ability to pass a context and additional request options.

See DeleteItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DeleteTable

func (c *DynamoDB) DeleteTable(input *DeleteTableInput) (*DeleteTableOutput, error)

DeleteTable API operation for Amazon DynamoDB.

The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.

DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.

When you delete a table, any indexes on that table are also deleted.

If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.

Use the DescribeTable action to check the status of the table.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DeleteTable for usage and error information.

Returned Error Codes:

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteTable

Example (Shared00)

To delete a table

This example deletes the Music table.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.DeleteTableInput{
		TableName: aws.String("Music"),
	}

	result, err := svc.DeleteTable(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeResourceInUseException:
				fmt.Println(dynamodb.ErrCodeResourceInUseException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) DeleteTableRequest

func (c *DynamoDB) DeleteTableRequest(input *DeleteTableInput) (req *request.Request, output *DeleteTableOutput)

DeleteTableRequest generates a "aws/request.Request" representing the client's request for the DeleteTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteTable for more information on using the DeleteTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteTableRequest method.
req, resp := client.DeleteTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteTable

func (*DynamoDB) DeleteTableWithContext added in v1.8.0

func (c *DynamoDB) DeleteTableWithContext(ctx aws.Context, input *DeleteTableInput, opts ...request.Option) (*DeleteTableOutput, error)

DeleteTableWithContext is the same as DeleteTable with the addition of the ability to pass a context and additional request options.

See DeleteTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeBackup added in v1.12.36

func (c *DynamoDB) DescribeBackup(input *DescribeBackupInput) (*DescribeBackupOutput, error)

DescribeBackup API operation for Amazon DynamoDB.

Describes an existing backup of a table.

You can call DescribeBackup at a maximum rate of 10 times per second.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeBackup for usage and error information.

Returned Error Codes:

  • ErrCodeBackupNotFoundException "BackupNotFoundException" Backup not found for the given BackupARN.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeBackup

func (*DynamoDB) DescribeBackupRequest added in v1.12.36

func (c *DynamoDB) DescribeBackupRequest(input *DescribeBackupInput) (req *request.Request, output *DescribeBackupOutput)

DescribeBackupRequest generates a "aws/request.Request" representing the client's request for the DescribeBackup operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeBackup for more information on using the DescribeBackup API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeBackupRequest method.
req, resp := client.DescribeBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeBackup

func (*DynamoDB) DescribeBackupWithContext added in v1.12.36

func (c *DynamoDB) DescribeBackupWithContext(ctx aws.Context, input *DescribeBackupInput, opts ...request.Option) (*DescribeBackupOutput, error)

DescribeBackupWithContext is the same as DescribeBackup with the addition of the ability to pass a context and additional request options.

See DescribeBackup for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeContinuousBackups added in v1.12.36

func (c *DynamoDB) DescribeContinuousBackups(input *DescribeContinuousBackupsInput) (*DescribeContinuousBackupsOutput, error)

DescribeContinuousBackups API operation for Amazon DynamoDB.

Checks the status of the backup restore settings on the specified table. If backups are enabled, ContinuousBackupsStatus will bet set to ENABLED.

You can call DescribeContinuousBackups at a maximum rate of 10 times per second.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeContinuousBackups for usage and error information.

Returned Error Codes:

  • ErrCodeTableNotFoundException "TableNotFoundException" A table with the name TableName does not currently exist within the subscriber's account.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeContinuousBackups

func (*DynamoDB) DescribeContinuousBackupsRequest added in v1.12.36

func (c *DynamoDB) DescribeContinuousBackupsRequest(input *DescribeContinuousBackupsInput) (req *request.Request, output *DescribeContinuousBackupsOutput)

DescribeContinuousBackupsRequest generates a "aws/request.Request" representing the client's request for the DescribeContinuousBackups operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeContinuousBackups for more information on using the DescribeContinuousBackups API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeContinuousBackupsRequest method.
req, resp := client.DescribeContinuousBackupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeContinuousBackups

func (*DynamoDB) DescribeContinuousBackupsWithContext added in v1.12.36

func (c *DynamoDB) DescribeContinuousBackupsWithContext(ctx aws.Context, input *DescribeContinuousBackupsInput, opts ...request.Option) (*DescribeContinuousBackupsOutput, error)

DescribeContinuousBackupsWithContext is the same as DescribeContinuousBackups with the addition of the ability to pass a context and additional request options.

See DescribeContinuousBackups for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeGlobalTable added in v1.12.36

func (c *DynamoDB) DescribeGlobalTable(input *DescribeGlobalTableInput) (*DescribeGlobalTableOutput, error)

DescribeGlobalTable API operation for Amazon DynamoDB.

Returns information about the global table.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeGlobalTable for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

  • ErrCodeGlobalTableNotFoundException "GlobalTableNotFoundException" The specified global table does not exist.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeGlobalTable

func (*DynamoDB) DescribeGlobalTableRequest added in v1.12.36

func (c *DynamoDB) DescribeGlobalTableRequest(input *DescribeGlobalTableInput) (req *request.Request, output *DescribeGlobalTableOutput)

DescribeGlobalTableRequest generates a "aws/request.Request" representing the client's request for the DescribeGlobalTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeGlobalTable for more information on using the DescribeGlobalTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeGlobalTableRequest method.
req, resp := client.DescribeGlobalTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeGlobalTable

func (*DynamoDB) DescribeGlobalTableWithContext added in v1.12.36

func (c *DynamoDB) DescribeGlobalTableWithContext(ctx aws.Context, input *DescribeGlobalTableInput, opts ...request.Option) (*DescribeGlobalTableOutput, error)

DescribeGlobalTableWithContext is the same as DescribeGlobalTable with the addition of the ability to pass a context and additional request options.

See DescribeGlobalTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeLimits added in v1.1.8

func (c *DynamoDB) DescribeLimits(input *DescribeLimitsInput) (*DescribeLimitsOutput, error)

DescribeLimits API operation for Amazon DynamoDB.

Returns the current provisioned-capacity limits for your AWS account in a region, both for the region as a whole and for any one DynamoDB table that you create there.

When you establish an AWS account, the account has initial limits on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given region. Also, there are per-table limits that apply when you create a table there. For more information, see Limits (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html) page in the Amazon DynamoDB Developer Guide.

Although you can increase these limits by filing a case at AWS Support Center (https://console.aws.amazon.com/support/home#/), obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those limits imposed by your account so that you have enough time to apply for an increase before you hit a limit.

For example, you could use one of the AWS SDKs to do the following:

Call DescribeLimits for a particular region to obtain your current account limits on provisioned capacity there.

Create a variable to hold the aggregate read capacity units provisioned for all your tables in that region, and one to hold the aggregate write capacity units. Zero them both.

Call ListTables to obtain a list of all your DynamoDB tables.

For each table name listed by ListTables, do the following:

Call DescribeTable with the table name.

Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.

If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.

Report the account limits for that region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.

This will let you see whether you are getting close to your account-level limits.

The per-table limits apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.

For existing tables and their GSIs, DynamoDB will not let you increase provisioned capacity extremely rapidly, but the only upper limit that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account limits.

DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.

The DescribeLimits Request element has no content.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeLimits for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeLimits

Example (Shared00)

To determine capacity limits per table and account, in the current AWS region

The following example returns the maximum read and write capacity units per table, and for the AWS account, in the current AWS region.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.DescribeLimitsInput{}

	result, err := svc.DescribeLimits(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) DescribeLimitsRequest added in v1.1.8

func (c *DynamoDB) DescribeLimitsRequest(input *DescribeLimitsInput) (req *request.Request, output *DescribeLimitsOutput)

DescribeLimitsRequest generates a "aws/request.Request" representing the client's request for the DescribeLimits operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeLimits for more information on using the DescribeLimits API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeLimitsRequest method.
req, resp := client.DescribeLimitsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeLimits

func (*DynamoDB) DescribeLimitsWithContext added in v1.8.0

func (c *DynamoDB) DescribeLimitsWithContext(ctx aws.Context, input *DescribeLimitsInput, opts ...request.Option) (*DescribeLimitsOutput, error)

DescribeLimitsWithContext is the same as DescribeLimits with the addition of the ability to pass a context and additional request options.

See DescribeLimits for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeTable

func (c *DynamoDB) DescribeTable(input *DescribeTableInput) (*DescribeTableOutput, error)

DescribeTable API operation for Amazon DynamoDB.

Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.

If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB might return a ResourceNotFoundException. This is because DescribeTable uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the DescribeTable request again.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeTable for usage and error information.

Returned Error Codes:

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTable

Example (Shared00)

To describe a table

This example describes the Music table.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.DescribeTableInput{
		TableName: aws.String("Music"),
	}

	result, err := svc.DescribeTable(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) DescribeTableRequest

func (c *DynamoDB) DescribeTableRequest(input *DescribeTableInput) (req *request.Request, output *DescribeTableOutput)

DescribeTableRequest generates a "aws/request.Request" representing the client's request for the DescribeTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeTable for more information on using the DescribeTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeTableRequest method.
req, resp := client.DescribeTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTable

func (*DynamoDB) DescribeTableWithContext added in v1.8.0

func (c *DynamoDB) DescribeTableWithContext(ctx aws.Context, input *DescribeTableInput, opts ...request.Option) (*DescribeTableOutput, error)

DescribeTableWithContext is the same as DescribeTable with the addition of the ability to pass a context and additional request options.

See DescribeTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) DescribeTimeToLive added in v1.7.2

func (c *DynamoDB) DescribeTimeToLive(input *DescribeTimeToLiveInput) (*DescribeTimeToLiveOutput, error)

DescribeTimeToLive API operation for Amazon DynamoDB.

Gives a description of the Time to Live (TTL) status on the specified table.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation DescribeTimeToLive for usage and error information.

Returned Error Codes:

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTimeToLive

func (*DynamoDB) DescribeTimeToLiveRequest added in v1.7.2

func (c *DynamoDB) DescribeTimeToLiveRequest(input *DescribeTimeToLiveInput) (req *request.Request, output *DescribeTimeToLiveOutput)

DescribeTimeToLiveRequest generates a "aws/request.Request" representing the client's request for the DescribeTimeToLive operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeTimeToLive for more information on using the DescribeTimeToLive API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeTimeToLiveRequest method.
req, resp := client.DescribeTimeToLiveRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTimeToLive

func (*DynamoDB) DescribeTimeToLiveWithContext added in v1.8.0

func (c *DynamoDB) DescribeTimeToLiveWithContext(ctx aws.Context, input *DescribeTimeToLiveInput, opts ...request.Option) (*DescribeTimeToLiveOutput, error)

DescribeTimeToLiveWithContext is the same as DescribeTimeToLive with the addition of the ability to pass a context and additional request options.

See DescribeTimeToLive for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) GetItem

func (c *DynamoDB) GetItem(input *GetItemInput) (*GetItemOutput, error)

GetItem API operation for Amazon DynamoDB.

The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data and there will be no Item element in the response.

GetItem provides an eventually consistent read by default. If your application requires a strongly consistent read, set ConsistentRead to true. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation GetItem for usage and error information.

Returned Error Codes:

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GetItem

Example (Shared00)

To read an item from a table

This example retrieves an item from the Music table. The table has a partition key and a sort key (Artist and SongTitle), so you must specify both of these attributes.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.GetItemInput{
		Key: map[string]*dynamodb.AttributeValue{
			"Artist": {
				S: aws.String("Acme Band"),
			},
			"SongTitle": {
				S: aws.String("Happy Day"),
			},
		},
		TableName: aws.String("Music"),
	}

	result, err := svc.GetItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) GetItemRequest

func (c *DynamoDB) GetItemRequest(input *GetItemInput) (req *request.Request, output *GetItemOutput)

GetItemRequest generates a "aws/request.Request" representing the client's request for the GetItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetItem for more information on using the GetItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetItemRequest method.
req, resp := client.GetItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GetItem

func (*DynamoDB) GetItemWithContext added in v1.8.0

func (c *DynamoDB) GetItemWithContext(ctx aws.Context, input *GetItemInput, opts ...request.Option) (*GetItemOutput, error)

GetItemWithContext is the same as GetItem with the addition of the ability to pass a context and additional request options.

See GetItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ListBackups added in v1.12.36

func (c *DynamoDB) ListBackups(input *ListBackupsInput) (*ListBackupsOutput, error)

ListBackups API operation for Amazon DynamoDB.

List backups associated with an AWS account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1MB worth of items in a page. You can also specify a limit for the maximum number of entries to be returned in a page.

In the request, start time is inclusive but end time is exclusive. Note that these limits are for the time at which the original backup was requested.

You can call ListBackups a maximum of 5 times per second.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation ListBackups for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListBackups

func (*DynamoDB) ListBackupsRequest added in v1.12.36

func (c *DynamoDB) ListBackupsRequest(input *ListBackupsInput) (req *request.Request, output *ListBackupsOutput)

ListBackupsRequest generates a "aws/request.Request" representing the client's request for the ListBackups operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListBackups for more information on using the ListBackups API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListBackupsRequest method.
req, resp := client.ListBackupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListBackups

func (*DynamoDB) ListBackupsWithContext added in v1.12.36

func (c *DynamoDB) ListBackupsWithContext(ctx aws.Context, input *ListBackupsInput, opts ...request.Option) (*ListBackupsOutput, error)

ListBackupsWithContext is the same as ListBackups with the addition of the ability to pass a context and additional request options.

See ListBackups for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ListGlobalTables added in v1.12.36

func (c *DynamoDB) ListGlobalTables(input *ListGlobalTablesInput) (*ListGlobalTablesOutput, error)

ListGlobalTables API operation for Amazon DynamoDB.

Lists all the global tables. Only those global tables that have replicas in the region specified as input are returned.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation ListGlobalTables for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListGlobalTables

func (*DynamoDB) ListGlobalTablesRequest added in v1.12.36

func (c *DynamoDB) ListGlobalTablesRequest(input *ListGlobalTablesInput) (req *request.Request, output *ListGlobalTablesOutput)

ListGlobalTablesRequest generates a "aws/request.Request" representing the client's request for the ListGlobalTables operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListGlobalTables for more information on using the ListGlobalTables API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListGlobalTablesRequest method.
req, resp := client.ListGlobalTablesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListGlobalTables

func (*DynamoDB) ListGlobalTablesWithContext added in v1.12.36

func (c *DynamoDB) ListGlobalTablesWithContext(ctx aws.Context, input *ListGlobalTablesInput, opts ...request.Option) (*ListGlobalTablesOutput, error)

ListGlobalTablesWithContext is the same as ListGlobalTables with the addition of the ability to pass a context and additional request options.

See ListGlobalTables for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ListTables

func (c *DynamoDB) ListTables(input *ListTablesInput) (*ListTablesOutput, error)

ListTables API operation for Amazon DynamoDB.

Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation ListTables for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTables

Example (Shared00)

To list tables

This example lists all of the tables associated with the current AWS account and endpoint.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.ListTablesInput{}

	result, err := svc.ListTables(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) ListTablesPages

func (c *DynamoDB) ListTablesPages(input *ListTablesInput, fn func(*ListTablesOutput, bool) bool) error

ListTablesPages iterates over the pages of a ListTables operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListTables method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListTables operation.
pageNum := 0
err := client.ListTablesPages(params,
    func(page *ListTablesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*DynamoDB) ListTablesPagesWithContext added in v1.8.0

func (c *DynamoDB) ListTablesPagesWithContext(ctx aws.Context, input *ListTablesInput, fn func(*ListTablesOutput, bool) bool, opts ...request.Option) error

ListTablesPagesWithContext same as ListTablesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ListTablesRequest

func (c *DynamoDB) ListTablesRequest(input *ListTablesInput) (req *request.Request, output *ListTablesOutput)

ListTablesRequest generates a "aws/request.Request" representing the client's request for the ListTables operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTables for more information on using the ListTables API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTablesRequest method.
req, resp := client.ListTablesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTables

func (*DynamoDB) ListTablesWithContext added in v1.8.0

func (c *DynamoDB) ListTablesWithContext(ctx aws.Context, input *ListTablesInput, opts ...request.Option) (*ListTablesOutput, error)

ListTablesWithContext is the same as ListTables with the addition of the ability to pass a context and additional request options.

See ListTables for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ListTagsOfResource added in v1.6.12

func (c *DynamoDB) ListTagsOfResource(input *ListTagsOfResourceInput) (*ListTagsOfResourceOutput, error)

ListTagsOfResource API operation for Amazon DynamoDB.

List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.

For an overview on tagging DynamoDB resources, see Tagging for DynamoDB (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation ListTagsOfResource for usage and error information.

Returned Error Codes:

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTagsOfResource

func (*DynamoDB) ListTagsOfResourceRequest added in v1.6.12

func (c *DynamoDB) ListTagsOfResourceRequest(input *ListTagsOfResourceInput) (req *request.Request, output *ListTagsOfResourceOutput)

ListTagsOfResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsOfResource operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTagsOfResource for more information on using the ListTagsOfResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTagsOfResourceRequest method.
req, resp := client.ListTagsOfResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTagsOfResource

func (*DynamoDB) ListTagsOfResourceWithContext added in v1.8.0

func (c *DynamoDB) ListTagsOfResourceWithContext(ctx aws.Context, input *ListTagsOfResourceInput, opts ...request.Option) (*ListTagsOfResourceOutput, error)

ListTagsOfResourceWithContext is the same as ListTagsOfResource with the addition of the ability to pass a context and additional request options.

See ListTagsOfResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) PutItem

func (c *DynamoDB) PutItem(input *PutItemInput) (*PutItemOutput, error)

PutItem API operation for Amazon DynamoDB.

Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the ReturnValues parameter.

This topic provides general information about the PutItem API.

For information on how to call the PutItem API using the AWS SDK in specific languages, see the following:

PutItem in the AWS Command Line Interface  (http://docs.aws.amazon.com/goto/aws-cli/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for .NET  (http://docs.aws.amazon.com/goto/DotNetSDKV3/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for C++  (http://docs.aws.amazon.com/goto/SdkForCpp/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for Go  (http://docs.aws.amazon.com/goto/SdkForGoV1/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for Java  (http://docs.aws.amazon.com/goto/SdkForJava/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for JavaScript  (http://docs.aws.amazon.com/goto/AWSJavaScriptSDK/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for PHP V3  (http://docs.aws.amazon.com/goto/SdkForPHPV3/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for Python  (http://docs.aws.amazon.com/goto/boto3/dynamodb-2012-08-10/PutItem)

PutItem in the AWS SDK for Ruby V2  (http://docs.aws.amazon.com/goto/SdkForRubyV2/dynamodb-2012-08-10/PutItem)

When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes cannot be empty. Requests with empty values will be rejected with a ValidationException exception.

To prevent a new item from replacing an existing item, use a conditional expression that contains the attribute_not_exists function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the attribute_not_exists function will only succeed if no matching item exists.

For more information about PutItem, see Working with Items (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithItems.html) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation PutItem for usage and error information.

Returned Error Codes:

  • ErrCodeConditionalCheckFailedException "ConditionalCheckFailedException" A condition specified in the operation could not be evaluated.

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeItemCollectionSizeLimitExceededException "ItemCollectionSizeLimitExceededException" An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/PutItem

Example (Shared00)

To add an item to a table

This example adds a new item to the Music table.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.PutItemInput{
		Item: map[string]*dynamodb.AttributeValue{
			"AlbumTitle": {
				S: aws.String("Somewhat Famous"),
			},
			"Artist": {
				S: aws.String("No One You Know"),
			},
			"SongTitle": {
				S: aws.String("Call Me Today"),
			},
		},
		ReturnConsumedCapacity: aws.String("TOTAL"),
		TableName:              aws.String("Music"),
	}

	result, err := svc.PutItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeConditionalCheckFailedException:
				fmt.Println(dynamodb.ErrCodeConditionalCheckFailedException, aerr.Error())
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeItemCollectionSizeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeItemCollectionSizeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) PutItemRequest

func (c *DynamoDB) PutItemRequest(input *PutItemInput) (req *request.Request, output *PutItemOutput)

PutItemRequest generates a "aws/request.Request" representing the client's request for the PutItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See PutItem for more information on using the PutItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the PutItemRequest method.
req, resp := client.PutItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/PutItem

func (*DynamoDB) PutItemWithContext added in v1.8.0

func (c *DynamoDB) PutItemWithContext(ctx aws.Context, input *PutItemInput, opts ...request.Option) (*PutItemOutput, error)

PutItemWithContext is the same as PutItem with the addition of the ability to pass a context and additional request options.

See PutItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) Query

func (c *DynamoDB) Query(input *QueryInput) (*QueryOutput, error)

Query API operation for Amazon DynamoDB.

The Query operation finds items based on primary key values. You can query any table or secondary index that has a composite primary key (a partition key and a sort key).

Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.

A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.

DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.

Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.

A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.html#Query.Pagination) in the Amazon DynamoDB Developer Guide.

FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.

A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.

You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation Query for usage and error information.

Returned Error Codes:

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Query

Example (Shared00)

To query an item

This example queries items in the Music table. The table has a partition key and sort key (Artist and SongTitle), but this query only specifies the partition key value. It returns song titles by the artist named "No One You Know".

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.QueryInput{
		ExpressionAttributeValues: map[string]*dynamodb.AttributeValue{
			":v1": {
				S: aws.String("No One You Know"),
			},
		},
		KeyConditionExpression: aws.String("Artist = :v1"),
		ProjectionExpression:   aws.String("SongTitle"),
		TableName:              aws.String("Music"),
	}

	result, err := svc.Query(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) QueryPages

func (c *DynamoDB) QueryPages(input *QueryInput, fn func(*QueryOutput, bool) bool) error

QueryPages iterates over the pages of a Query operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See Query method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a Query operation.
pageNum := 0
err := client.QueryPages(params,
    func(page *QueryOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*DynamoDB) QueryPagesWithContext added in v1.8.0

func (c *DynamoDB) QueryPagesWithContext(ctx aws.Context, input *QueryInput, fn func(*QueryOutput, bool) bool, opts ...request.Option) error

QueryPagesWithContext same as QueryPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) QueryRequest

func (c *DynamoDB) QueryRequest(input *QueryInput) (req *request.Request, output *QueryOutput)

QueryRequest generates a "aws/request.Request" representing the client's request for the Query operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See Query for more information on using the Query API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the QueryRequest method.
req, resp := client.QueryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Query

func (*DynamoDB) QueryWithContext added in v1.8.0

func (c *DynamoDB) QueryWithContext(ctx aws.Context, input *QueryInput, opts ...request.Option) (*QueryOutput, error)

QueryWithContext is the same as Query with the addition of the ability to pass a context and additional request options.

See Query for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) RestoreTableFromBackup added in v1.12.36

func (c *DynamoDB) RestoreTableFromBackup(input *RestoreTableFromBackupInput) (*RestoreTableFromBackupOutput, error)

RestoreTableFromBackup API operation for Amazon DynamoDB.

Creates a new table from an existing backup. Any number of users can execute up to 10 concurrent restores in a given account.

You can call RestoreTableFromBackup at a maximum rate of 10 times per second.

You must manually set up the following on the restored table:

  • Auto scaling policies

  • IAM policies

  • Cloudwatch metrics and alarms

  • Tags

  • Time to Live (TTL) settings

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation RestoreTableFromBackup for usage and error information.

Returned Error Codes:

  • ErrCodeTableAlreadyExistsException "TableAlreadyExistsException" A table with the name already exists.

  • ErrCodeTableInUseException "TableInUseException" A table by that name is either being created or deleted.

  • ErrCodeBackupNotFoundException "BackupNotFoundException" Backup not found for the given BackupARN.

  • ErrCodeBackupInUseException "BackupInUseException" There is another ongoing conflicting backup control plane operation on the table. The backups is either being created, deleted or restored to a table.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreTableFromBackup

func (*DynamoDB) RestoreTableFromBackupRequest added in v1.12.36

func (c *DynamoDB) RestoreTableFromBackupRequest(input *RestoreTableFromBackupInput) (req *request.Request, output *RestoreTableFromBackupOutput)

RestoreTableFromBackupRequest generates a "aws/request.Request" representing the client's request for the RestoreTableFromBackup operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See RestoreTableFromBackup for more information on using the RestoreTableFromBackup API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the RestoreTableFromBackupRequest method.
req, resp := client.RestoreTableFromBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreTableFromBackup

func (*DynamoDB) RestoreTableFromBackupWithContext added in v1.12.36

func (c *DynamoDB) RestoreTableFromBackupWithContext(ctx aws.Context, input *RestoreTableFromBackupInput, opts ...request.Option) (*RestoreTableFromBackupOutput, error)

RestoreTableFromBackupWithContext is the same as RestoreTableFromBackup with the addition of the ability to pass a context and additional request options.

See RestoreTableFromBackup for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) Scan

func (c *DynamoDB) Scan(input *ScanInput) (*ScanOutput, error)

Scan API operation for Amazon DynamoDB.

The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.

If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.

A single Scan operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.Pagination) in the Amazon DynamoDB Developer Guide.

Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.ParallelScan) in the Amazon DynamoDB Developer Guide.

Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation Scan for usage and error information.

Returned Error Codes:

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Scan

Example (Shared00)

To scan a table

This example scans the entire Music table, and then narrows the results to songs by the artist "No One You Know". For each item, only the album title and song title are returned.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.ScanInput{
		ExpressionAttributeNames: map[string]*string{
			"AT": aws.String("AlbumTitle"),
			"ST": aws.String("SongTitle"),
		},
		ExpressionAttributeValues: map[string]*dynamodb.AttributeValue{
			":a": {
				S: aws.String("No One You Know"),
			},
		},
		FilterExpression:     aws.String("Artist = :a"),
		ProjectionExpression: aws.String("#ST, #AT"),
		TableName:            aws.String("Music"),
	}

	result, err := svc.Scan(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) ScanPages

func (c *DynamoDB) ScanPages(input *ScanInput, fn func(*ScanOutput, bool) bool) error

ScanPages iterates over the pages of a Scan operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See Scan method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a Scan operation.
pageNum := 0
err := client.ScanPages(params,
    func(page *ScanOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*DynamoDB) ScanPagesWithContext added in v1.8.0

func (c *DynamoDB) ScanPagesWithContext(ctx aws.Context, input *ScanInput, fn func(*ScanOutput, bool) bool, opts ...request.Option) error

ScanPagesWithContext same as ScanPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) ScanRequest

func (c *DynamoDB) ScanRequest(input *ScanInput) (req *request.Request, output *ScanOutput)

ScanRequest generates a "aws/request.Request" representing the client's request for the Scan operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See Scan for more information on using the Scan API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ScanRequest method.
req, resp := client.ScanRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Scan

func (*DynamoDB) ScanWithContext added in v1.8.0

func (c *DynamoDB) ScanWithContext(ctx aws.Context, input *ScanInput, opts ...request.Option) (*ScanOutput, error)

ScanWithContext is the same as Scan with the addition of the ability to pass a context and additional request options.

See Scan for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) TagResource added in v1.6.12

func (c *DynamoDB) TagResource(input *TagResourceInput) (*TagResourceOutput, error)

TagResource API operation for Amazon DynamoDB.

Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to 5 times per second, per account.

For an overview on tagging DynamoDB resources, see Tagging for DynamoDB (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation TagResource for usage and error information.

Returned Error Codes:

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TagResource

func (*DynamoDB) TagResourceRequest added in v1.6.12

func (c *DynamoDB) TagResourceRequest(input *TagResourceInput) (req *request.Request, output *TagResourceOutput)

TagResourceRequest generates a "aws/request.Request" representing the client's request for the TagResource operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See TagResource for more information on using the TagResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the TagResourceRequest method.
req, resp := client.TagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TagResource

func (*DynamoDB) TagResourceWithContext added in v1.8.0

func (c *DynamoDB) TagResourceWithContext(ctx aws.Context, input *TagResourceInput, opts ...request.Option) (*TagResourceOutput, error)

TagResourceWithContext is the same as TagResource with the addition of the ability to pass a context and additional request options.

See TagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) UntagResource added in v1.6.12

func (c *DynamoDB) UntagResource(input *UntagResourceInput) (*UntagResourceOutput, error)

UntagResource API operation for Amazon DynamoDB.

Removes the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to 5 times per second, per account.

For an overview on tagging DynamoDB resources, see Tagging for DynamoDB (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation UntagResource for usage and error information.

Returned Error Codes:

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UntagResource

func (*DynamoDB) UntagResourceRequest added in v1.6.12

func (c *DynamoDB) UntagResourceRequest(input *UntagResourceInput) (req *request.Request, output *UntagResourceOutput)

UntagResourceRequest generates a "aws/request.Request" representing the client's request for the UntagResource operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UntagResource for more information on using the UntagResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UntagResourceRequest method.
req, resp := client.UntagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UntagResource

func (*DynamoDB) UntagResourceWithContext added in v1.8.0

func (c *DynamoDB) UntagResourceWithContext(ctx aws.Context, input *UntagResourceInput, opts ...request.Option) (*UntagResourceOutput, error)

UntagResourceWithContext is the same as UntagResource with the addition of the ability to pass a context and additional request options.

See UntagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) UpdateGlobalTable added in v1.12.36

func (c *DynamoDB) UpdateGlobalTable(input *UpdateGlobalTableInput) (*UpdateGlobalTableOutput, error)

UpdateGlobalTable API operation for Amazon DynamoDB.

Adds or removes replicas to the specified global table. The global table should already exist to be able to use this operation. Currently, the replica to be added should be empty.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation UpdateGlobalTable for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

  • ErrCodeGlobalTableNotFoundException "GlobalTableNotFoundException" The specified global table does not exist.

  • ErrCodeReplicaAlreadyExistsException "ReplicaAlreadyExistsException" The specified replica is already part of the global table.

  • ErrCodeReplicaNotFoundException "ReplicaNotFoundException" The specified replica is no longer part of the global table.

  • ErrCodeTableNotFoundException "TableNotFoundException" A table with the name TableName does not currently exist within the subscriber's account.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateGlobalTable

func (*DynamoDB) UpdateGlobalTableRequest added in v1.12.36

func (c *DynamoDB) UpdateGlobalTableRequest(input *UpdateGlobalTableInput) (req *request.Request, output *UpdateGlobalTableOutput)

UpdateGlobalTableRequest generates a "aws/request.Request" representing the client's request for the UpdateGlobalTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateGlobalTable for more information on using the UpdateGlobalTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateGlobalTableRequest method.
req, resp := client.UpdateGlobalTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateGlobalTable

func (*DynamoDB) UpdateGlobalTableWithContext added in v1.12.36

func (c *DynamoDB) UpdateGlobalTableWithContext(ctx aws.Context, input *UpdateGlobalTableInput, opts ...request.Option) (*UpdateGlobalTableOutput, error)

UpdateGlobalTableWithContext is the same as UpdateGlobalTable with the addition of the ability to pass a context and additional request options.

See UpdateGlobalTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) UpdateItem

func (c *DynamoDB) UpdateItem(input *UpdateItemInput) (*UpdateItemOutput, error)

UpdateItem API operation for Amazon DynamoDB.

Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).

You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation UpdateItem for usage and error information.

Returned Error Codes:

  • ErrCodeConditionalCheckFailedException "ConditionalCheckFailedException" A condition specified in the operation could not be evaluated.

  • ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException" Your request rate is too high. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.RetryAndBackoff) in the Amazon DynamoDB Developer Guide.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeItemCollectionSizeLimitExceededException "ItemCollectionSizeLimitExceededException" An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateItem

Example (Shared00)

To update an item in a table

This example updates an item in the Music table. It adds a new attribute (Year) and modifies the AlbumTitle attribute. All of the attributes in the item, as they appear after the update, are returned in the response.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.UpdateItemInput{
		ExpressionAttributeNames: map[string]*string{
			"#AT": aws.String("AlbumTitle"),
			"#Y":  aws.String("Year"),
		},
		ExpressionAttributeValues: map[string]*dynamodb.AttributeValue{
			":t": {
				S: aws.String("Louder Than Ever"),
			},
			":y": {
				N: aws.String("2015"),
			},
		},
		Key: map[string]*dynamodb.AttributeValue{
			"Artist": {
				S: aws.String("Acme Band"),
			},
			"SongTitle": {
				S: aws.String("Happy Day"),
			},
		},
		ReturnValues:     aws.String("ALL_NEW"),
		TableName:        aws.String("Music"),
		UpdateExpression: aws.String("SET #Y = :y, #AT = :t"),
	}

	result, err := svc.UpdateItem(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeConditionalCheckFailedException:
				fmt.Println(dynamodb.ErrCodeConditionalCheckFailedException, aerr.Error())
			case dynamodb.ErrCodeProvisionedThroughputExceededException:
				fmt.Println(dynamodb.ErrCodeProvisionedThroughputExceededException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeItemCollectionSizeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeItemCollectionSizeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) UpdateItemRequest

func (c *DynamoDB) UpdateItemRequest(input *UpdateItemInput) (req *request.Request, output *UpdateItemOutput)

UpdateItemRequest generates a "aws/request.Request" representing the client's request for the UpdateItem operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateItem for more information on using the UpdateItem API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateItemRequest method.
req, resp := client.UpdateItemRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateItem

func (*DynamoDB) UpdateItemWithContext added in v1.8.0

func (c *DynamoDB) UpdateItemWithContext(ctx aws.Context, input *UpdateItemInput, opts ...request.Option) (*UpdateItemOutput, error)

UpdateItemWithContext is the same as UpdateItem with the addition of the ability to pass a context and additional request options.

See UpdateItem for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) UpdateTable

func (c *DynamoDB) UpdateTable(input *UpdateTableInput) (*UpdateTableOutput, error)

UpdateTable API operation for Amazon DynamoDB.

Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.

You can only perform one of the following operations at once:

  • Modify the provisioned throughput settings of the table.

  • Enable or disable Streams on the table.

  • Remove a global secondary index from the table.

  • Create a new global secondary index on the table. Once the index begins backfilling, you can use UpdateTable to perform other operations.

UpdateTable is an asynchronous operation; while it is executing, the table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot issue another UpdateTable request. When the table returns to the ACTIVE state, the UpdateTable operation is complete.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation UpdateTable for usage and error information.

Returned Error Codes:

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTable

Example (Shared00)

To modify a table's provisioned throughput

This example increases the provisioned read and write capacity on the Music table.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/dynamodb"
)

func main() {
	svc := dynamodb.New(session.New())
	input := &dynamodb.UpdateTableInput{
		ProvisionedThroughput: &dynamodb.ProvisionedThroughput{
			ReadCapacityUnits:  aws.Int64(10),
			WriteCapacityUnits: aws.Int64(10),
		},
		TableName: aws.String("MusicCollection"),
	}

	result, err := svc.UpdateTable(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case dynamodb.ErrCodeResourceInUseException:
				fmt.Println(dynamodb.ErrCodeResourceInUseException, aerr.Error())
			case dynamodb.ErrCodeResourceNotFoundException:
				fmt.Println(dynamodb.ErrCodeResourceNotFoundException, aerr.Error())
			case dynamodb.ErrCodeLimitExceededException:
				fmt.Println(dynamodb.ErrCodeLimitExceededException, aerr.Error())
			case dynamodb.ErrCodeInternalServerError:
				fmt.Println(dynamodb.ErrCodeInternalServerError, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*DynamoDB) UpdateTableRequest

func (c *DynamoDB) UpdateTableRequest(input *UpdateTableInput) (req *request.Request, output *UpdateTableOutput)

UpdateTableRequest generates a "aws/request.Request" representing the client's request for the UpdateTable operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateTable for more information on using the UpdateTable API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateTableRequest method.
req, resp := client.UpdateTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTable

func (*DynamoDB) UpdateTableWithContext added in v1.8.0

func (c *DynamoDB) UpdateTableWithContext(ctx aws.Context, input *UpdateTableInput, opts ...request.Option) (*UpdateTableOutput, error)

UpdateTableWithContext is the same as UpdateTable with the addition of the ability to pass a context and additional request options.

See UpdateTable for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) UpdateTimeToLive added in v1.7.2

func (c *DynamoDB) UpdateTimeToLive(input *UpdateTimeToLiveInput) (*UpdateTimeToLiveOutput, error)

UpdateTimeToLive API operation for Amazon DynamoDB.

The UpdateTimeToLive method will enable or disable TTL for the specified table. A successful UpdateTimeToLive call returns the current TimeToLiveSpecification; it may take up to one hour for the change to fully process. Any additional UpdateTimeToLive calls for the same table during this one hour duration result in a ValidationException.

TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.

The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1st, 1970 UTC.

DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.

DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.

As items are deleted, they are removed from any Local Secondary Index and Global Secondary Index immediately in the same eventually consistent way as a standard delete operation.

For more information, see Time To Live (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/TTL.html) in the Amazon DynamoDB Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon DynamoDB's API operation UpdateTimeToLive for usage and error information.

Returned Error Codes:

  • ErrCodeResourceInUseException "ResourceInUseException" The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.

  • ErrCodeResourceNotFoundException "ResourceNotFoundException" The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

  • ErrCodeLimitExceededException "LimitExceededException" The number of concurrent table requests (cumulative number of tables in the CREATING, DELETING or UPDATING state) exceeds the maximum allowed of 10.

    Also, for tables with secondary indexes, only one of those tables can be in the CREATING state at any point in time. Do not attempt to create more than one such table simultaneously.

    The total limit of tables in the ACTIVE state is 250.

  • ErrCodeInternalServerError "InternalServerError" An error occurred on the server side.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTimeToLive

func (*DynamoDB) UpdateTimeToLiveRequest added in v1.7.2

func (c *DynamoDB) UpdateTimeToLiveRequest(input *UpdateTimeToLiveInput) (req *request.Request, output *UpdateTimeToLiveOutput)

UpdateTimeToLiveRequest generates a "aws/request.Request" representing the client's request for the UpdateTimeToLive operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateTimeToLive for more information on using the UpdateTimeToLive API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateTimeToLiveRequest method.
req, resp := client.UpdateTimeToLiveRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTimeToLive

func (*DynamoDB) UpdateTimeToLiveWithContext added in v1.8.0

func (c *DynamoDB) UpdateTimeToLiveWithContext(ctx aws.Context, input *UpdateTimeToLiveInput, opts ...request.Option) (*UpdateTimeToLiveOutput, error)

UpdateTimeToLiveWithContext is the same as UpdateTimeToLive with the addition of the ability to pass a context and additional request options.

See UpdateTimeToLive for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) WaitUntilTableExists added in v0.10.3

func (c *DynamoDB) WaitUntilTableExists(input *DescribeTableInput) error

WaitUntilTableExists uses the DynamoDB API operation DescribeTable to wait for a condition to be met before returning. If the condition is not met within the max attempt window, an error will be returned.

func (*DynamoDB) WaitUntilTableExistsWithContext added in v1.8.0

func (c *DynamoDB) WaitUntilTableExistsWithContext(ctx aws.Context, input *DescribeTableInput, opts ...request.WaiterOption) error

WaitUntilTableExistsWithContext is an extended version of WaitUntilTableExists. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DynamoDB) WaitUntilTableNotExists added in v0.10.3

func (c *DynamoDB) WaitUntilTableNotExists(input *DescribeTableInput) error

WaitUntilTableNotExists uses the DynamoDB API operation DescribeTable to wait for a condition to be met before returning. If the condition is not met within the max attempt window, an error will be returned.

func (*DynamoDB) WaitUntilTableNotExistsWithContext added in v1.8.0

func (c *DynamoDB) WaitUntilTableNotExistsWithContext(ctx aws.Context, input *DescribeTableInput, opts ...request.WaiterOption) error

WaitUntilTableNotExistsWithContext is an extended version of WaitUntilTableNotExists. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type ExpectedAttributeValue

type ExpectedAttributeValue struct {

	// One or more values to evaluate against the supplied attribute. The number
	// of values in the list depends on the ComparisonOperator being used.
	//
	// For type Number, value comparisons are numeric.
	//
	// String value comparisons for greater than, equals, or less than are based
	// on ASCII character code values. For example, a is greater than A, and a is
	// greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
	// (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters).
	//
	// For Binary, DynamoDB treats each byte of the binary data as unsigned when
	// it compares binary values.
	//
	// For information on specifying data types in JSON, see JSON Data Format (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataFormat.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributeValueList []*AttributeValue `type:"list"`

	// A comparator for evaluating attributes in the AttributeValueList. For example,
	// equals, greater than, less than, etc.
	//
	// The following comparison operators are available:
	//
	// EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS |
	// BEGINS_WITH | IN | BETWEEN
	//
	// The following are descriptions of each comparison operator.
	//
	//    * EQ : Equal. EQ is supported for all data types, including lists and
	//    maps.
	//
	// AttributeValueList can contain only one AttributeValue element of type String,
	//    Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	//    an AttributeValue element of a different type than the one provided in
	//    the request, the value does not match. For example, {"S":"6"} does not
	//    equal {"N":"6"}. Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//    * NE : Not equal. NE is supported for all data types, including lists
	//    and maps.
	//
	//    * AttributeValueList can contain only one AttributeValue of type String,
	//    Number, Binary, String Set, Number Set, or Binary Set. If an item contains
	//    an AttributeValue of a different type than the one provided in the request,
	//    the value does not match. For example, {"S":"6"} does not equal {"N":"6"}.
	//    Also, {"N":"6"} does not equal {"NS":["6", "2", "1"]}.
	//
	//    * LE : Less than or equal.
	//
	// AttributeValueList can contain only one AttributeValue element of type String,
	// Number, or Binary (not a set type). If an item contains an AttributeValue
	// element of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"} does not equal {"N":"6"}. Also, {"N":"6"}
	// does not compare to {"NS":["6", "2", "1"]}.
	//
	// LT: Less than.
	//
	// AttributeValueListcan contain only one AttributeValueof type String, Number, or Binary (not a set type). If an item contains an
	// AttributeValueelement of a different type than the one provided in the request, the value
	// does not match. For example, {"S":"6"}does not equal {"N":"6"}. Also, {"N":"6"}does not compare to {"NS":["6", "2", "1"]}
	ComparisonOperator *string `type:"string" enum:"ComparisonOperator"`

	// Causes DynamoDB to evaluate the value before attempting a conditional operation:
	//
	//    * If Exists is true, DynamoDB will check to see if that attribute value
	//    already exists in the table. If it is found, then the operation succeeds.
	//    If it is not found, the operation fails with a ConditionalCheckFailedException.
	//
	//    * If Exists is false, DynamoDB assumes that the attribute value does not
	//    exist in the table. If in fact the value does not exist, then the assumption
	//    is valid and the operation succeeds. If the value is found, despite the
	//    assumption that it does not exist, the operation fails with a ConditionalCheckFailedException.
	//
	// The default setting for Exists is true. If you supply a Value all by itself,
	// DynamoDB assumes the attribute exists: You don't have to set Exists to true,
	// because it is implied.
	//
	// DynamoDB returns a ValidationException if:
	//
	//    * Exists is true but there is no Value to check. (You expect a value to
	//    exist, but don't specify what that value is.)
	//
	//    * Exists is false but you also provide a Value. (You cannot expect an
	//    attribute to have a value, while also expecting it not to exist.)
	Exists *bool `type:"boolean"`

	// Represents the data for the expected attribute.
	//
	// Each attribute value is described as a name-value pair. The name is the data
	// type, and the value is the data itself.
	//
	// For more information, see Data Types (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html#HowItWorks.DataTypes)
	// in the Amazon DynamoDB Developer Guide.
	Value *AttributeValue `type:"structure"`
	// contains filtered or unexported fields
}

Represents a condition to be compared with an attribute value. This condition can be used with DeleteItem, PutItem or UpdateItem operations; if the comparison evaluates to true, the operation succeeds; if not, the operation fails. You can use ExpectedAttributeValue in one of two different ways:

  • Use AttributeValueList to specify one or more values to compare against an attribute. Use ComparisonOperator to specify how you want to perform the comparison. If the comparison evaluates to true, then the conditional operation succeeds.

  • Use Value to specify a value that DynamoDB will compare against an attribute. If the values match, then ExpectedAttributeValue evaluates to true and the conditional operation succeeds. Optionally, you can also set Exists to false, indicating that you do not expect to find the attribute value in the table. In this case, the conditional operation succeeds only if the comparison evaluates to false.

Value and Exists are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ExpectedAttributeValue

func (ExpectedAttributeValue) GoString added in v0.6.5

func (s ExpectedAttributeValue) GoString() string

GoString returns the string representation

func (*ExpectedAttributeValue) SetAttributeValueList added in v1.5.0

func (s *ExpectedAttributeValue) SetAttributeValueList(v []*AttributeValue) *ExpectedAttributeValue

SetAttributeValueList sets the AttributeValueList field's value.

func (*ExpectedAttributeValue) SetComparisonOperator added in v1.5.0

func (s *ExpectedAttributeValue) SetComparisonOperator(v string) *ExpectedAttributeValue

SetComparisonOperator sets the ComparisonOperator field's value.

func (*ExpectedAttributeValue) SetExists added in v1.5.0

SetExists sets the Exists field's value.

func (*ExpectedAttributeValue) SetValue added in v1.5.0

SetValue sets the Value field's value.

func (ExpectedAttributeValue) String added in v0.6.5

func (s ExpectedAttributeValue) String() string

String returns the string representation

type GetItemInput

type GetItemInput struct {

	// This is a legacy parameter. Use ProjectionExpression instead. For more information,
	// see AttributesToGet (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributesToGet []*string `min:"1" type:"list"`

	// Determines the read consistency model: If set to true, then the operation
	// uses strongly consistent reads; otherwise, the operation uses eventually
	// consistent reads.
	ConsistentRead *bool `type:"boolean"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// A map of attribute names to AttributeValue objects, representing the primary
	// key of the item to retrieve.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	//
	// Key is a required field
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ProjectionExpression *string `type:"string"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// The name of the table containing the requested item.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a GetItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GetItemInput

func (GetItemInput) GoString added in v0.6.5

func (s GetItemInput) GoString() string

GoString returns the string representation

func (*GetItemInput) SetAttributesToGet added in v1.5.0

func (s *GetItemInput) SetAttributesToGet(v []*string) *GetItemInput

SetAttributesToGet sets the AttributesToGet field's value.

func (*GetItemInput) SetConsistentRead added in v1.5.0

func (s *GetItemInput) SetConsistentRead(v bool) *GetItemInput

SetConsistentRead sets the ConsistentRead field's value.

func (*GetItemInput) SetExpressionAttributeNames added in v1.5.0

func (s *GetItemInput) SetExpressionAttributeNames(v map[string]*string) *GetItemInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*GetItemInput) SetKey added in v1.5.0

func (s *GetItemInput) SetKey(v map[string]*AttributeValue) *GetItemInput

SetKey sets the Key field's value.

func (*GetItemInput) SetProjectionExpression added in v1.5.0

func (s *GetItemInput) SetProjectionExpression(v string) *GetItemInput

SetProjectionExpression sets the ProjectionExpression field's value.

func (*GetItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *GetItemInput) SetReturnConsumedCapacity(v string) *GetItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*GetItemInput) SetTableName added in v1.5.0

func (s *GetItemInput) SetTableName(v string) *GetItemInput

SetTableName sets the TableName field's value.

func (GetItemInput) String added in v0.6.5

func (s GetItemInput) String() string

String returns the string representation

func (*GetItemInput) Validate added in v1.1.21

func (s *GetItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetItemOutput

type GetItemOutput struct {

	// The capacity units consumed by the GetItem operation. The data returned includes
	// the total provisioned throughput consumed, along with statistics for the
	// table and any indexes involved in the operation. ConsumedCapacity is only
	// returned if the ReturnConsumedCapacity parameter was specified. For more
	// information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// A map of attribute names to AttributeValue objects, as specified by ProjectionExpression.
	Item map[string]*AttributeValue `type:"map"`
	// contains filtered or unexported fields
}

Represents the output of a GetItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GetItemOutput

func (GetItemOutput) GoString added in v0.6.5

func (s GetItemOutput) GoString() string

GoString returns the string representation

func (*GetItemOutput) SetConsumedCapacity added in v1.5.0

func (s *GetItemOutput) SetConsumedCapacity(v *ConsumedCapacity) *GetItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*GetItemOutput) SetItem added in v1.5.0

func (s *GetItemOutput) SetItem(v map[string]*AttributeValue) *GetItemOutput

SetItem sets the Item field's value.

func (GetItemOutput) String added in v0.6.5

func (s GetItemOutput) String() string

String returns the string representation

type GlobalSecondaryIndex

type GlobalSecondaryIndex struct {

	// The name of the global secondary index. The name must be unique among all
	// other indexes on this table.
	//
	// IndexName is a required field
	IndexName *string `min:"3" type:"string" required:"true"`

	// The complete key schema for a global secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	// KeySchema is a required field
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into the
	// global secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	//
	// Projection is a required field
	Projection *Projection `type:"structure" required:"true"`

	// Represents the provisioned throughput settings for the specified global secondary
	// index.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// ProvisionedThroughput is a required field
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents the properties of a global secondary index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalSecondaryIndex

func (GlobalSecondaryIndex) GoString added in v0.6.5

func (s GlobalSecondaryIndex) GoString() string

GoString returns the string representation

func (*GlobalSecondaryIndex) SetIndexName added in v1.5.0

func (s *GlobalSecondaryIndex) SetIndexName(v string) *GlobalSecondaryIndex

SetIndexName sets the IndexName field's value.

func (*GlobalSecondaryIndex) SetKeySchema added in v1.5.0

SetKeySchema sets the KeySchema field's value.

func (*GlobalSecondaryIndex) SetProjection added in v1.5.0

SetProjection sets the Projection field's value.

func (*GlobalSecondaryIndex) SetProvisionedThroughput added in v1.5.0

func (s *GlobalSecondaryIndex) SetProvisionedThroughput(v *ProvisionedThroughput) *GlobalSecondaryIndex

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (GlobalSecondaryIndex) String added in v0.6.5

func (s GlobalSecondaryIndex) String() string

String returns the string representation

func (*GlobalSecondaryIndex) Validate added in v1.1.21

func (s *GlobalSecondaryIndex) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GlobalSecondaryIndexDescription

type GlobalSecondaryIndexDescription struct {

	// Indicates whether the index is currently backfilling. Backfilling is the
	// process of reading items from the table and determining whether they can
	// be added to the index. (Not all items will qualify: For example, a partition
	// key cannot have any duplicate values.) If an item can be added to the index,
	// DynamoDB will do so. After all items have been processed, the backfilling
	// operation is complete and Backfilling is false.
	//
	// For indexes that were created during a CreateTable operation, the Backfilling
	// attribute does not appear in the DescribeTable output.
	Backfilling *bool `type:"boolean"`

	// The Amazon Resource Name (ARN) that uniquely identifies the index.
	IndexArn *string `type:"string"`

	// The name of the global secondary index.
	IndexName *string `min:"3" type:"string"`

	// The total size of the specified index, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	IndexSizeBytes *int64 `type:"long"`

	// The current state of the global secondary index:
	//
	//    * CREATING - The index is being created.
	//
	//    * UPDATING - The index is being updated.
	//
	//    * DELETING - The index is being deleted.
	//
	//    * ACTIVE - The index is ready for use.
	IndexStatus *string `type:"string" enum:"IndexStatus"`

	// The number of items in the specified index. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The complete key schema for a global secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into the
	// global secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	Projection *Projection `type:"structure"`

	// Represents the provisioned throughput settings for the specified global secondary
	// index.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	ProvisionedThroughput *ProvisionedThroughputDescription `type:"structure"`
	// contains filtered or unexported fields
}

Represents the properties of a global secondary index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalSecondaryIndexDescription

func (GlobalSecondaryIndexDescription) GoString added in v0.6.5

GoString returns the string representation

func (*GlobalSecondaryIndexDescription) SetBackfilling added in v1.5.0

SetBackfilling sets the Backfilling field's value.

func (*GlobalSecondaryIndexDescription) SetIndexArn added in v1.5.0

SetIndexArn sets the IndexArn field's value.

func (*GlobalSecondaryIndexDescription) SetIndexName added in v1.5.0

SetIndexName sets the IndexName field's value.

func (*GlobalSecondaryIndexDescription) SetIndexSizeBytes added in v1.5.0

SetIndexSizeBytes sets the IndexSizeBytes field's value.

func (*GlobalSecondaryIndexDescription) SetIndexStatus added in v1.5.0

SetIndexStatus sets the IndexStatus field's value.

func (*GlobalSecondaryIndexDescription) SetItemCount added in v1.5.0

SetItemCount sets the ItemCount field's value.

func (*GlobalSecondaryIndexDescription) SetKeySchema added in v1.5.0

SetKeySchema sets the KeySchema field's value.

func (*GlobalSecondaryIndexDescription) SetProjection added in v1.5.0

SetProjection sets the Projection field's value.

func (*GlobalSecondaryIndexDescription) SetProvisionedThroughput added in v1.5.0

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (GlobalSecondaryIndexDescription) String added in v0.6.5

String returns the string representation

type GlobalSecondaryIndexInfo added in v1.12.36

type GlobalSecondaryIndexInfo struct {

	// The name of the global secondary index.
	IndexName *string `min:"3" type:"string"`

	// The complete key schema for a global secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into the
	// global secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	Projection *Projection `type:"structure"`

	// Represents the provisioned throughput settings for the specified global secondary
	// index.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure"`
	// contains filtered or unexported fields
}

Represents the properties of a global secondary index for the table when the backup was created. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalSecondaryIndexInfo

func (GlobalSecondaryIndexInfo) GoString added in v1.12.36

func (s GlobalSecondaryIndexInfo) GoString() string

GoString returns the string representation

func (*GlobalSecondaryIndexInfo) SetIndexName added in v1.12.36

SetIndexName sets the IndexName field's value.

func (*GlobalSecondaryIndexInfo) SetKeySchema added in v1.12.36

SetKeySchema sets the KeySchema field's value.

func (*GlobalSecondaryIndexInfo) SetProjection added in v1.12.36

SetProjection sets the Projection field's value.

func (*GlobalSecondaryIndexInfo) SetProvisionedThroughput added in v1.12.36

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (GlobalSecondaryIndexInfo) String added in v1.12.36

func (s GlobalSecondaryIndexInfo) String() string

String returns the string representation

type GlobalSecondaryIndexUpdate

type GlobalSecondaryIndexUpdate struct {

	// The parameters required for creating a global secondary index on an existing
	// table:
	//
	//    * IndexName
	//
	//    * KeySchema
	//
	//    * AttributeDefinitions
	//
	//    * Projection
	//
	//    * ProvisionedThroughput
	Create *CreateGlobalSecondaryIndexAction `type:"structure"`

	// The name of an existing global secondary index to be removed.
	Delete *DeleteGlobalSecondaryIndexAction `type:"structure"`

	// The name of an existing global secondary index, along with new provisioned
	// throughput settings to be applied to that index.
	Update *UpdateGlobalSecondaryIndexAction `type:"structure"`
	// contains filtered or unexported fields
}

Represents one of the following:

  • A new global secondary index to be added to an existing table.

  • New provisioned throughput parameters for an existing global secondary index.

  • An existing global secondary index to be removed from an existing table.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalSecondaryIndexUpdate

func (GlobalSecondaryIndexUpdate) GoString added in v0.6.5

func (s GlobalSecondaryIndexUpdate) GoString() string

GoString returns the string representation

func (*GlobalSecondaryIndexUpdate) SetCreate added in v1.5.0

SetCreate sets the Create field's value.

func (*GlobalSecondaryIndexUpdate) SetDelete added in v1.5.0

SetDelete sets the Delete field's value.

func (*GlobalSecondaryIndexUpdate) SetUpdate added in v1.5.0

SetUpdate sets the Update field's value.

func (GlobalSecondaryIndexUpdate) String added in v0.6.5

String returns the string representation

func (*GlobalSecondaryIndexUpdate) Validate added in v1.1.21

func (s *GlobalSecondaryIndexUpdate) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GlobalTable added in v1.12.36

type GlobalTable struct {

	// The global table name.
	GlobalTableName *string `min:"3" type:"string"`

	// The regions where the global table has replicas.
	ReplicationGroup []*Replica `type:"list"`
	// contains filtered or unexported fields
}

Represents the properties of a global table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalTable

func (GlobalTable) GoString added in v1.12.36

func (s GlobalTable) GoString() string

GoString returns the string representation

func (*GlobalTable) SetGlobalTableName added in v1.12.36

func (s *GlobalTable) SetGlobalTableName(v string) *GlobalTable

SetGlobalTableName sets the GlobalTableName field's value.

func (*GlobalTable) SetReplicationGroup added in v1.12.36

func (s *GlobalTable) SetReplicationGroup(v []*Replica) *GlobalTable

SetReplicationGroup sets the ReplicationGroup field's value.

func (GlobalTable) String added in v1.12.36

func (s GlobalTable) String() string

String returns the string representation

type GlobalTableDescription added in v1.12.36

type GlobalTableDescription struct {

	// The creation time of the global table.
	CreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The unique identifier of the global table.
	GlobalTableArn *string `type:"string"`

	// The global table name.
	GlobalTableName *string `min:"3" type:"string"`

	// The current state of the global table:
	//
	//    * CREATING - The global table is being created.
	//
	//    * UPDATING - The global table is being updated.
	//
	//    * DELETING - The global table is being deleted.
	//
	//    * ACTIVE - The global table is ready for use.
	GlobalTableStatus *string `type:"string" enum:"GlobalTableStatus"`

	// The regions where the global table has replicas.
	ReplicationGroup []*ReplicaDescription `type:"list"`
	// contains filtered or unexported fields
}

Contains details about the global table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/GlobalTableDescription

func (GlobalTableDescription) GoString added in v1.12.36

func (s GlobalTableDescription) GoString() string

GoString returns the string representation

func (*GlobalTableDescription) SetCreationDateTime added in v1.12.36

func (s *GlobalTableDescription) SetCreationDateTime(v time.Time) *GlobalTableDescription

SetCreationDateTime sets the CreationDateTime field's value.

func (*GlobalTableDescription) SetGlobalTableArn added in v1.12.36

func (s *GlobalTableDescription) SetGlobalTableArn(v string) *GlobalTableDescription

SetGlobalTableArn sets the GlobalTableArn field's value.

func (*GlobalTableDescription) SetGlobalTableName added in v1.12.36

func (s *GlobalTableDescription) SetGlobalTableName(v string) *GlobalTableDescription

SetGlobalTableName sets the GlobalTableName field's value.

func (*GlobalTableDescription) SetGlobalTableStatus added in v1.12.36

func (s *GlobalTableDescription) SetGlobalTableStatus(v string) *GlobalTableDescription

SetGlobalTableStatus sets the GlobalTableStatus field's value.

func (*GlobalTableDescription) SetReplicationGroup added in v1.12.36

SetReplicationGroup sets the ReplicationGroup field's value.

func (GlobalTableDescription) String added in v1.12.36

func (s GlobalTableDescription) String() string

String returns the string representation

type ItemCollectionMetrics

type ItemCollectionMetrics struct {

	// The partition key value of the item collection. This value is the same as
	// the partition key value of the item.
	ItemCollectionKey map[string]*AttributeValue `type:"map"`

	// An estimate of item collection size, in gigabytes. This value is a two-element
	// array containing a lower bound and an upper bound for the estimate. The estimate
	// includes the size of all the items in the table, plus the size of all attributes
	// projected into all of the local secondary indexes on that table. Use this
	// estimate to measure whether a local secondary index is approaching its size
	// limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	// precision or accuracy of the estimate.
	SizeEstimateRangeGB []*float64 `type:"list"`
	// contains filtered or unexported fields
}

Information about item collections, if any, that were affected by the operation. ItemCollectionMetrics is only returned if the request asked for it. If the table does not have any local secondary indexes, this information is not returned in the response. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ItemCollectionMetrics

func (ItemCollectionMetrics) GoString added in v0.6.5

func (s ItemCollectionMetrics) GoString() string

GoString returns the string representation

func (*ItemCollectionMetrics) SetItemCollectionKey added in v1.5.0

func (s *ItemCollectionMetrics) SetItemCollectionKey(v map[string]*AttributeValue) *ItemCollectionMetrics

SetItemCollectionKey sets the ItemCollectionKey field's value.

func (*ItemCollectionMetrics) SetSizeEstimateRangeGB added in v1.5.0

func (s *ItemCollectionMetrics) SetSizeEstimateRangeGB(v []*float64) *ItemCollectionMetrics

SetSizeEstimateRangeGB sets the SizeEstimateRangeGB field's value.

func (ItemCollectionMetrics) String added in v0.6.5

func (s ItemCollectionMetrics) String() string

String returns the string representation

type KeySchemaElement

type KeySchemaElement struct {

	// The name of a key attribute.
	//
	// AttributeName is a required field
	AttributeName *string `min:"1" type:"string" required:"true"`

	// The role that this key attribute will assume:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	// KeyType is a required field
	KeyType *string `type:"string" required:"true" enum:"KeyType"`
	// contains filtered or unexported fields
}

Represents a single element of a key schema. A key schema specifies the attributes that make up the primary key of a table, or the key attributes of an index.

A KeySchemaElement represents exactly one attribute of the primary key. For example, a simple primary key would be represented by one KeySchemaElement (for the partition key). A composite primary key would require one KeySchemaElement for the partition key, and another KeySchemaElement for the sort key.

A KeySchemaElement must be a scalar, top-level attribute (not a nested attribute). The data type must be one of String, Number, or Binary. The attribute cannot be nested within a List or a Map. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/KeySchemaElement

func (KeySchemaElement) GoString added in v0.6.5

func (s KeySchemaElement) GoString() string

GoString returns the string representation

func (*KeySchemaElement) SetAttributeName added in v1.5.0

func (s *KeySchemaElement) SetAttributeName(v string) *KeySchemaElement

SetAttributeName sets the AttributeName field's value.

func (*KeySchemaElement) SetKeyType added in v1.5.0

func (s *KeySchemaElement) SetKeyType(v string) *KeySchemaElement

SetKeyType sets the KeyType field's value.

func (KeySchemaElement) String added in v0.6.5

func (s KeySchemaElement) String() string

String returns the string representation

func (*KeySchemaElement) Validate added in v1.1.21

func (s *KeySchemaElement) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type KeysAndAttributes

type KeysAndAttributes struct {

	// This is a legacy parameter. Use ProjectionExpression instead. For more information,
	// see Legacy Conditional Parameters (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributesToGet []*string `min:"1" type:"list"`

	// The consistency of a read operation. If set to true, then a strongly consistent
	// read is used; otherwise, an eventually consistent read is used.
	ConsistentRead *bool `type:"boolean"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// The primary key attribute values that define the items and the attributes
	// associated with the items.
	//
	// Keys is a required field
	Keys []map[string]*AttributeValue `min:"1" type:"list" required:"true"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the ProjectionExpression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ProjectionExpression *string `type:"string"`
	// contains filtered or unexported fields
}

Represents a set of primary keys and, for each key, the attributes to retrieve from the table.

For each primary key, you must provide all of the key attributes. For example, with a simple primary key, you only need to provide the partition key. For a composite primary key, you must provide both the partition key and the sort key. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/KeysAndAttributes

func (KeysAndAttributes) GoString added in v0.6.5

func (s KeysAndAttributes) GoString() string

GoString returns the string representation

func (*KeysAndAttributes) SetAttributesToGet added in v1.5.0

func (s *KeysAndAttributes) SetAttributesToGet(v []*string) *KeysAndAttributes

SetAttributesToGet sets the AttributesToGet field's value.

func (*KeysAndAttributes) SetConsistentRead added in v1.5.0

func (s *KeysAndAttributes) SetConsistentRead(v bool) *KeysAndAttributes

SetConsistentRead sets the ConsistentRead field's value.

func (*KeysAndAttributes) SetExpressionAttributeNames added in v1.5.0

func (s *KeysAndAttributes) SetExpressionAttributeNames(v map[string]*string) *KeysAndAttributes

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*KeysAndAttributes) SetKeys added in v1.5.0

SetKeys sets the Keys field's value.

func (*KeysAndAttributes) SetProjectionExpression added in v1.5.0

func (s *KeysAndAttributes) SetProjectionExpression(v string) *KeysAndAttributes

SetProjectionExpression sets the ProjectionExpression field's value.

func (KeysAndAttributes) String added in v0.6.5

func (s KeysAndAttributes) String() string

String returns the string representation

func (*KeysAndAttributes) Validate added in v1.1.21

func (s *KeysAndAttributes) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListBackupsInput added in v1.12.36

type ListBackupsInput struct {

	// LastEvaluatedBackupARN returned by the previous ListBackups call.
	ExclusiveStartBackupArn *string `min:"37" type:"string"`

	// Maximum number of backups to return at once.
	Limit *int64 `min:"1" type:"integer"`

	// The backups from the table specified by TableName are listed.
	TableName *string `min:"3" type:"string"`

	// Only backups created after this time are listed. TimeRangeLowerBound is inclusive.
	TimeRangeLowerBound *time.Time `type:"timestamp" timestampFormat:"unix"`

	// Only backups created before this time are listed. TimeRangeUpperBound is
	// exclusive.
	TimeRangeUpperBound *time.Time `type:"timestamp" timestampFormat:"unix"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListBackupsInput

func (ListBackupsInput) GoString added in v1.12.36

func (s ListBackupsInput) GoString() string

GoString returns the string representation

func (*ListBackupsInput) SetExclusiveStartBackupArn added in v1.12.36

func (s *ListBackupsInput) SetExclusiveStartBackupArn(v string) *ListBackupsInput

SetExclusiveStartBackupArn sets the ExclusiveStartBackupArn field's value.

func (*ListBackupsInput) SetLimit added in v1.12.36

func (s *ListBackupsInput) SetLimit(v int64) *ListBackupsInput

SetLimit sets the Limit field's value.

func (*ListBackupsInput) SetTableName added in v1.12.36

func (s *ListBackupsInput) SetTableName(v string) *ListBackupsInput

SetTableName sets the TableName field's value.

func (*ListBackupsInput) SetTimeRangeLowerBound added in v1.12.36

func (s *ListBackupsInput) SetTimeRangeLowerBound(v time.Time) *ListBackupsInput

SetTimeRangeLowerBound sets the TimeRangeLowerBound field's value.

func (*ListBackupsInput) SetTimeRangeUpperBound added in v1.12.36

func (s *ListBackupsInput) SetTimeRangeUpperBound(v time.Time) *ListBackupsInput

SetTimeRangeUpperBound sets the TimeRangeUpperBound field's value.

func (ListBackupsInput) String added in v1.12.36

func (s ListBackupsInput) String() string

String returns the string representation

func (*ListBackupsInput) Validate added in v1.12.36

func (s *ListBackupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListBackupsOutput added in v1.12.36

type ListBackupsOutput struct {

	// List of BackupSummary objects.
	BackupSummaries []*BackupSummary `type:"list"`

	// Last evaluated BackupARN.
	LastEvaluatedBackupArn *string `min:"37" type:"string"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListBackupsOutput

func (ListBackupsOutput) GoString added in v1.12.36

func (s ListBackupsOutput) GoString() string

GoString returns the string representation

func (*ListBackupsOutput) SetBackupSummaries added in v1.12.36

func (s *ListBackupsOutput) SetBackupSummaries(v []*BackupSummary) *ListBackupsOutput

SetBackupSummaries sets the BackupSummaries field's value.

func (*ListBackupsOutput) SetLastEvaluatedBackupArn added in v1.12.36

func (s *ListBackupsOutput) SetLastEvaluatedBackupArn(v string) *ListBackupsOutput

SetLastEvaluatedBackupArn sets the LastEvaluatedBackupArn field's value.

func (ListBackupsOutput) String added in v1.12.36

func (s ListBackupsOutput) String() string

String returns the string representation

type ListGlobalTablesInput added in v1.12.36

type ListGlobalTablesInput struct {

	// The first global table name that this operation will evaluate.
	ExclusiveStartGlobalTableName *string `min:"3" type:"string"`

	// The maximum number of table names to return.
	Limit *int64 `min:"1" type:"integer"`

	// Lists the global tables in a specific region.
	RegionName *string `type:"string"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListGlobalTablesInput

func (ListGlobalTablesInput) GoString added in v1.12.36

func (s ListGlobalTablesInput) GoString() string

GoString returns the string representation

func (*ListGlobalTablesInput) SetExclusiveStartGlobalTableName added in v1.12.36

func (s *ListGlobalTablesInput) SetExclusiveStartGlobalTableName(v string) *ListGlobalTablesInput

SetExclusiveStartGlobalTableName sets the ExclusiveStartGlobalTableName field's value.

func (*ListGlobalTablesInput) SetLimit added in v1.12.36

SetLimit sets the Limit field's value.

func (*ListGlobalTablesInput) SetRegionName added in v1.12.36

func (s *ListGlobalTablesInput) SetRegionName(v string) *ListGlobalTablesInput

SetRegionName sets the RegionName field's value.

func (ListGlobalTablesInput) String added in v1.12.36

func (s ListGlobalTablesInput) String() string

String returns the string representation

func (*ListGlobalTablesInput) Validate added in v1.12.36

func (s *ListGlobalTablesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListGlobalTablesOutput added in v1.12.36

type ListGlobalTablesOutput struct {

	// List of global table names.
	GlobalTables []*GlobalTable `type:"list"`

	// Last evaluated global table name.
	LastEvaluatedGlobalTableName *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListGlobalTablesOutput

func (ListGlobalTablesOutput) GoString added in v1.12.36

func (s ListGlobalTablesOutput) GoString() string

GoString returns the string representation

func (*ListGlobalTablesOutput) SetGlobalTables added in v1.12.36

func (s *ListGlobalTablesOutput) SetGlobalTables(v []*GlobalTable) *ListGlobalTablesOutput

SetGlobalTables sets the GlobalTables field's value.

func (*ListGlobalTablesOutput) SetLastEvaluatedGlobalTableName added in v1.12.36

func (s *ListGlobalTablesOutput) SetLastEvaluatedGlobalTableName(v string) *ListGlobalTablesOutput

SetLastEvaluatedGlobalTableName sets the LastEvaluatedGlobalTableName field's value.

func (ListGlobalTablesOutput) String added in v1.12.36

func (s ListGlobalTablesOutput) String() string

String returns the string representation

type ListTablesInput

type ListTablesInput struct {

	// The first table name that this operation will evaluate. Use the value that
	// was returned for LastEvaluatedTableName in a previous operation, so that
	// you can obtain the next page of results.
	ExclusiveStartTableName *string `min:"3" type:"string"`

	// A maximum number of table names to return. If this parameter is not specified,
	// the limit is 100.
	Limit *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Represents the input of a ListTables operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTablesInput

func (ListTablesInput) GoString added in v0.6.5

func (s ListTablesInput) GoString() string

GoString returns the string representation

func (*ListTablesInput) SetExclusiveStartTableName added in v1.5.0

func (s *ListTablesInput) SetExclusiveStartTableName(v string) *ListTablesInput

SetExclusiveStartTableName sets the ExclusiveStartTableName field's value.

func (*ListTablesInput) SetLimit added in v1.5.0

func (s *ListTablesInput) SetLimit(v int64) *ListTablesInput

SetLimit sets the Limit field's value.

func (ListTablesInput) String added in v0.6.5

func (s ListTablesInput) String() string

String returns the string representation

func (*ListTablesInput) Validate added in v1.1.21

func (s *ListTablesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTablesOutput

type ListTablesOutput struct {

	// The name of the last table in the current page of results. Use this value
	// as the ExclusiveStartTableName in a new request to obtain the next page of
	// results, until all the table names are returned.
	//
	// If you do not receive a LastEvaluatedTableName value in the response, this
	// means that there are no more table names to be retrieved.
	LastEvaluatedTableName *string `min:"3" type:"string"`

	// The names of the tables associated with the current account at the current
	// endpoint. The maximum size of this array is 100.
	//
	// If LastEvaluatedTableName also appears in the output, you can use this value
	// as the ExclusiveStartTableName parameter in a subsequent ListTables request
	// and obtain the next page of results.
	TableNames []*string `type:"list"`
	// contains filtered or unexported fields
}

Represents the output of a ListTables operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTablesOutput

func (ListTablesOutput) GoString added in v0.6.5

func (s ListTablesOutput) GoString() string

GoString returns the string representation

func (*ListTablesOutput) SetLastEvaluatedTableName added in v1.5.0

func (s *ListTablesOutput) SetLastEvaluatedTableName(v string) *ListTablesOutput

SetLastEvaluatedTableName sets the LastEvaluatedTableName field's value.

func (*ListTablesOutput) SetTableNames added in v1.5.0

func (s *ListTablesOutput) SetTableNames(v []*string) *ListTablesOutput

SetTableNames sets the TableNames field's value.

func (ListTablesOutput) String added in v0.6.5

func (s ListTablesOutput) String() string

String returns the string representation

type ListTagsOfResourceInput added in v1.6.12

type ListTagsOfResourceInput struct {

	// An optional string that, if supplied, must be copied from the output of a
	// previous call to ListTagOfResource. When provided in this manner, this API
	// fetches the next page of results.
	NextToken *string `type:"string"`

	// The Amazon DynamoDB resource with tags to be listed. This value is an Amazon
	// Resource Name (ARN).
	//
	// ResourceArn is a required field
	ResourceArn *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTagsOfResourceInput

func (ListTagsOfResourceInput) GoString added in v1.6.12

func (s ListTagsOfResourceInput) GoString() string

GoString returns the string representation

func (*ListTagsOfResourceInput) SetNextToken added in v1.6.12

SetNextToken sets the NextToken field's value.

func (*ListTagsOfResourceInput) SetResourceArn added in v1.6.12

SetResourceArn sets the ResourceArn field's value.

func (ListTagsOfResourceInput) String added in v1.6.12

func (s ListTagsOfResourceInput) String() string

String returns the string representation

func (*ListTagsOfResourceInput) Validate added in v1.6.12

func (s *ListTagsOfResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsOfResourceOutput added in v1.6.12

type ListTagsOfResourceOutput struct {

	// If this value is returned, there are additional results to be displayed.
	// To retrieve them, call ListTagsOfResource again, with NextToken set to this
	// value.
	NextToken *string `type:"string"`

	// The tags currently associated with the Amazon DynamoDB resource.
	Tags []*Tag `type:"list"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ListTagsOfResourceOutput

func (ListTagsOfResourceOutput) GoString added in v1.6.12

func (s ListTagsOfResourceOutput) GoString() string

GoString returns the string representation

func (*ListTagsOfResourceOutput) SetNextToken added in v1.6.12

SetNextToken sets the NextToken field's value.

func (*ListTagsOfResourceOutput) SetTags added in v1.6.12

SetTags sets the Tags field's value.

func (ListTagsOfResourceOutput) String added in v1.6.12

func (s ListTagsOfResourceOutput) String() string

String returns the string representation

type LocalSecondaryIndex

type LocalSecondaryIndex struct {

	// The name of the local secondary index. The name must be unique among all
	// other indexes on this table.
	//
	// IndexName is a required field
	IndexName *string `min:"3" type:"string" required:"true"`

	// The complete key schema for the local secondary index, consisting of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	//
	// KeySchema is a required field
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Represents attributes that are copied (projected) from the table into the
	// local secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	//
	// Projection is a required field
	Projection *Projection `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents the properties of a local secondary index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/LocalSecondaryIndex

func (LocalSecondaryIndex) GoString added in v0.6.5

func (s LocalSecondaryIndex) GoString() string

GoString returns the string representation

func (*LocalSecondaryIndex) SetIndexName added in v1.5.0

func (s *LocalSecondaryIndex) SetIndexName(v string) *LocalSecondaryIndex

SetIndexName sets the IndexName field's value.

func (*LocalSecondaryIndex) SetKeySchema added in v1.5.0

SetKeySchema sets the KeySchema field's value.

func (*LocalSecondaryIndex) SetProjection added in v1.5.0

func (s *LocalSecondaryIndex) SetProjection(v *Projection) *LocalSecondaryIndex

SetProjection sets the Projection field's value.

func (LocalSecondaryIndex) String added in v0.6.5

func (s LocalSecondaryIndex) String() string

String returns the string representation

func (*LocalSecondaryIndex) Validate added in v1.1.21

func (s *LocalSecondaryIndex) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type LocalSecondaryIndexDescription

type LocalSecondaryIndexDescription struct {

	// The Amazon Resource Name (ARN) that uniquely identifies the index.
	IndexArn *string `type:"string"`

	// Represents the name of the local secondary index.
	IndexName *string `min:"3" type:"string"`

	// The total size of the specified index, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	IndexSizeBytes *int64 `type:"long"`

	// The number of items in the specified index. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The complete key schema for the local secondary index, consisting of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into the
	// global secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	Projection *Projection `type:"structure"`
	// contains filtered or unexported fields
}

Represents the properties of a local secondary index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/LocalSecondaryIndexDescription

func (LocalSecondaryIndexDescription) GoString added in v0.6.5

GoString returns the string representation

func (*LocalSecondaryIndexDescription) SetIndexArn added in v1.5.0

SetIndexArn sets the IndexArn field's value.

func (*LocalSecondaryIndexDescription) SetIndexName added in v1.5.0

SetIndexName sets the IndexName field's value.

func (*LocalSecondaryIndexDescription) SetIndexSizeBytes added in v1.5.0

SetIndexSizeBytes sets the IndexSizeBytes field's value.

func (*LocalSecondaryIndexDescription) SetItemCount added in v1.5.0

SetItemCount sets the ItemCount field's value.

func (*LocalSecondaryIndexDescription) SetKeySchema added in v1.5.0

SetKeySchema sets the KeySchema field's value.

func (*LocalSecondaryIndexDescription) SetProjection added in v1.5.0

SetProjection sets the Projection field's value.

func (LocalSecondaryIndexDescription) String added in v0.6.5

String returns the string representation

type LocalSecondaryIndexInfo added in v1.12.36

type LocalSecondaryIndexInfo struct {

	// Represents the name of the local secondary index.
	IndexName *string `min:"3" type:"string"`

	// The complete key schema for a local secondary index, which consists of one
	// or more pairs of attribute names and key types:
	//
	//    * HASH - partition key
	//
	//    * RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	// "hash attribute" derives from DynamoDB' usage of an internal hash function
	// to evenly distribute data items across partitions, based on their partition
	// key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	// attribute" derives from the way DynamoDB stores items with the same partition
	// key physically close together, in sorted order by the sort key value.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// Represents attributes that are copied (projected) from the table into the
	// global secondary index. These are in addition to the primary key attributes
	// and index key attributes, which are automatically projected.
	Projection *Projection `type:"structure"`
	// contains filtered or unexported fields
}

Represents the properties of a local secondary index for the table when the backup was created. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/LocalSecondaryIndexInfo

func (LocalSecondaryIndexInfo) GoString added in v1.12.36

func (s LocalSecondaryIndexInfo) GoString() string

GoString returns the string representation

func (*LocalSecondaryIndexInfo) SetIndexName added in v1.12.36

SetIndexName sets the IndexName field's value.

func (*LocalSecondaryIndexInfo) SetKeySchema added in v1.12.36

SetKeySchema sets the KeySchema field's value.

func (*LocalSecondaryIndexInfo) SetProjection added in v1.12.36

SetProjection sets the Projection field's value.

func (LocalSecondaryIndexInfo) String added in v1.12.36

func (s LocalSecondaryIndexInfo) String() string

String returns the string representation

type Projection

type Projection struct {

	// Represents the non-key attribute names which will be projected into the index.
	//
	// For local secondary indexes, the total count of NonKeyAttributes summed across
	// all of the local secondary indexes, must not exceed 20. If you project the
	// same attribute into two different indexes, this counts as two distinct attributes
	// when determining the total.
	NonKeyAttributes []*string `min:"1" type:"list"`

	// The set of attributes that are projected into the index:
	//
	//    * KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	//    * INCLUDE - Only the specified table attributes are projected into the
	//    index. The list of projected attributes are in NonKeyAttributes.
	//
	//    * ALL - All of the table attributes are projected into the index.
	ProjectionType *string `type:"string" enum:"ProjectionType"`
	// contains filtered or unexported fields
}

Represents attributes that are copied (projected) from the table into an index. These are in addition to the primary key attributes and index key attributes, which are automatically projected. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Projection

func (Projection) GoString added in v0.6.5

func (s Projection) GoString() string

GoString returns the string representation

func (*Projection) SetNonKeyAttributes added in v1.5.0

func (s *Projection) SetNonKeyAttributes(v []*string) *Projection

SetNonKeyAttributes sets the NonKeyAttributes field's value.

func (*Projection) SetProjectionType added in v1.5.0

func (s *Projection) SetProjectionType(v string) *Projection

SetProjectionType sets the ProjectionType field's value.

func (Projection) String added in v0.6.5

func (s Projection) String() string

String returns the string representation

func (*Projection) Validate added in v1.1.21

func (s *Projection) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ProvisionedThroughput

type ProvisionedThroughput struct {

	// The maximum number of strongly consistent reads consumed per second before
	// DynamoDB returns a ThrottlingException. For more information, see Specifying
	// Read and Write Requirements (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#ProvisionedThroughput)
	// in the Amazon DynamoDB Developer Guide.
	//
	// ReadCapacityUnits is a required field
	ReadCapacityUnits *int64 `min:"1" type:"long" required:"true"`

	// The maximum number of writes consumed per second before DynamoDB returns
	// a ThrottlingException. For more information, see Specifying Read and Write
	// Requirements (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#ProvisionedThroughput)
	// in the Amazon DynamoDB Developer Guide.
	//
	// WriteCapacityUnits is a required field
	WriteCapacityUnits *int64 `min:"1" type:"long" required:"true"`
	// contains filtered or unexported fields
}

Represents the provisioned throughput settings for a specified table or index. The settings can be modified using the UpdateTable operation.

For current minimum and maximum provisioned throughput values, see Limits (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html) in the Amazon DynamoDB Developer Guide. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ProvisionedThroughput

func (ProvisionedThroughput) GoString added in v0.6.5

func (s ProvisionedThroughput) GoString() string

GoString returns the string representation

func (*ProvisionedThroughput) SetReadCapacityUnits added in v1.5.0

func (s *ProvisionedThroughput) SetReadCapacityUnits(v int64) *ProvisionedThroughput

SetReadCapacityUnits sets the ReadCapacityUnits field's value.

func (*ProvisionedThroughput) SetWriteCapacityUnits added in v1.5.0

func (s *ProvisionedThroughput) SetWriteCapacityUnits(v int64) *ProvisionedThroughput

SetWriteCapacityUnits sets the WriteCapacityUnits field's value.

func (ProvisionedThroughput) String added in v0.6.5

func (s ProvisionedThroughput) String() string

String returns the string representation

func (*ProvisionedThroughput) Validate added in v1.1.21

func (s *ProvisionedThroughput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ProvisionedThroughputDescription

type ProvisionedThroughputDescription struct {

	// The date and time of the last provisioned throughput decrease for this table.
	LastDecreaseDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The date and time of the last provisioned throughput increase for this table.
	LastIncreaseDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The number of provisioned throughput decreases for this table during this
	// UTC calendar day. For current maximums on provisioned throughput decreases,
	// see Limits (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	NumberOfDecreasesToday *int64 `min:"1" type:"long"`

	// The maximum number of strongly consistent reads consumed per second before
	// DynamoDB returns a ThrottlingException. Eventually consistent reads require
	// less effort than strongly consistent reads, so a setting of 50 ReadCapacityUnits
	// per second provides 100 eventually consistent ReadCapacityUnits per second.
	ReadCapacityUnits *int64 `min:"1" type:"long"`

	// The maximum number of writes consumed per second before DynamoDB returns
	// a ThrottlingException.
	WriteCapacityUnits *int64 `min:"1" type:"long"`
	// contains filtered or unexported fields
}

Represents the provisioned throughput settings for the table, consisting of read and write capacity units, along with data about increases and decreases. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ProvisionedThroughputDescription

func (ProvisionedThroughputDescription) GoString added in v0.6.5

GoString returns the string representation

func (*ProvisionedThroughputDescription) SetLastDecreaseDateTime added in v1.5.0

SetLastDecreaseDateTime sets the LastDecreaseDateTime field's value.

func (*ProvisionedThroughputDescription) SetLastIncreaseDateTime added in v1.5.0

SetLastIncreaseDateTime sets the LastIncreaseDateTime field's value.

func (*ProvisionedThroughputDescription) SetNumberOfDecreasesToday added in v1.5.0

SetNumberOfDecreasesToday sets the NumberOfDecreasesToday field's value.

func (*ProvisionedThroughputDescription) SetReadCapacityUnits added in v1.5.0

SetReadCapacityUnits sets the ReadCapacityUnits field's value.

func (*ProvisionedThroughputDescription) SetWriteCapacityUnits added in v1.5.0

SetWriteCapacityUnits sets the WriteCapacityUnits field's value.

func (ProvisionedThroughputDescription) String added in v0.6.5

String returns the string representation

type PutItemInput

type PutItemInput struct {

	// A condition that must be satisfied in order for a conditional PutItem operation
	// to succeed.
	//
	// An expression can contain any of the following:
	//
	//    * Functions: attribute_exists | attribute_not_exists | attribute_type
	//    | contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//    * Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN
	//
	//    *  Logical operators: AND | OR | NOT
	//
	// For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see ConditionalOperator (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see Expected (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html)
	// in the Amazon DynamoDB Developer Guide.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	// Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	// { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	// ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A map of attribute name/value pairs, one for each attribute. Only the primary
	// key attributes are required; you can optionally provide other attribute name-value
	// pairs for the item.
	//
	// You must provide all of the attributes for the primary key. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide both values for both the
	// partition key and the sort key.
	//
	// If you specify any attributes that are part of an index key, then the data
	// types for those attributes must match those of the schema in the table's
	// attribute definition.
	//
	// For more information about primary keys, see Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html#DataModelPrimaryKey)
	// in the Amazon DynamoDB Developer Guide.
	//
	// Each element in the Item map is an AttributeValue object.
	//
	// Item is a required field
	Item map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appeared
	// before they were updated with the PutItem request. For PutItem, the valid
	// values are:
	//
	//    * NONE - If ReturnValues is not specified, or if its value is NONE, then
	//    nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    * ALL_OLD - If PutItem overwrote an attribute name-value pair, then the
	//    content of the old item is returned.
	//
	// The ReturnValues parameter is used by several DynamoDB operations; however,
	// PutItem does not recognize any values other than NONE or ALL_OLD.
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table to contain the item.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a PutItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/PutItemInput

func (PutItemInput) GoString added in v0.6.5

func (s PutItemInput) GoString() string

GoString returns the string representation

func (*PutItemInput) SetConditionExpression added in v1.5.0

func (s *PutItemInput) SetConditionExpression(v string) *PutItemInput

SetConditionExpression sets the ConditionExpression field's value.

func (*PutItemInput) SetConditionalOperator added in v1.5.0

func (s *PutItemInput) SetConditionalOperator(v string) *PutItemInput

SetConditionalOperator sets the ConditionalOperator field's value.

func (*PutItemInput) SetExpected added in v1.5.0

func (s *PutItemInput) SetExpected(v map[string]*ExpectedAttributeValue) *PutItemInput

SetExpected sets the Expected field's value.

func (*PutItemInput) SetExpressionAttributeNames added in v1.5.0

func (s *PutItemInput) SetExpressionAttributeNames(v map[string]*string) *PutItemInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*PutItemInput) SetExpressionAttributeValues added in v1.5.0

func (s *PutItemInput) SetExpressionAttributeValues(v map[string]*AttributeValue) *PutItemInput

SetExpressionAttributeValues sets the ExpressionAttributeValues field's value.

func (*PutItemInput) SetItem added in v1.5.0

func (s *PutItemInput) SetItem(v map[string]*AttributeValue) *PutItemInput

SetItem sets the Item field's value.

func (*PutItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *PutItemInput) SetReturnConsumedCapacity(v string) *PutItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*PutItemInput) SetReturnItemCollectionMetrics added in v1.5.0

func (s *PutItemInput) SetReturnItemCollectionMetrics(v string) *PutItemInput

SetReturnItemCollectionMetrics sets the ReturnItemCollectionMetrics field's value.

func (*PutItemInput) SetReturnValues added in v1.5.0

func (s *PutItemInput) SetReturnValues(v string) *PutItemInput

SetReturnValues sets the ReturnValues field's value.

func (*PutItemInput) SetTableName added in v1.5.0

func (s *PutItemInput) SetTableName(v string) *PutItemInput

SetTableName sets the TableName field's value.

func (PutItemInput) String added in v0.6.5

func (s PutItemInput) String() string

String returns the string representation

func (*PutItemInput) Validate added in v1.1.21

func (s *PutItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PutItemOutput

type PutItemOutput struct {

	// The attribute values as they appeared before the PutItem operation, but only
	// if ReturnValues is specified as ALL_OLD in the request. Each element consists
	// of an attribute name and an attribute value.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by the PutItem operation. The data returned includes
	// the total provisioned throughput consumed, along with statistics for the
	// table and any indexes involved in the operation. ConsumedCapacity is only
	// returned if the ReturnConsumedCapacity parameter was specified. For more
	// information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the PutItem
	// operation. ItemCollectionMetrics is only returned if the ReturnItemCollectionMetrics
	// parameter was specified. If the table does not have any local secondary indexes,
	// this information is not returned in the response.
	//
	// Each ItemCollectionMetrics element consists of:
	//
	//    * ItemCollectionKey - The partition key value of the item collection.
	//    This is the same as the partition key value of the item itself.
	//
	//    * SizeEstimateRangeGB - An estimate of item collection size, in gigabytes.
	//    This value is a two-element array containing a lower bound and an upper
	//    bound for the estimate. The estimate includes the size of all the items
	//    in the table, plus the size of all attributes projected into all of the
	//    local secondary indexes on that table. Use this estimate to measure whether
	//    a local secondary index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	//    precision or accuracy of the estimate.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of a PutItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/PutItemOutput

func (PutItemOutput) GoString added in v0.6.5

func (s PutItemOutput) GoString() string

GoString returns the string representation

func (*PutItemOutput) SetAttributes added in v1.5.0

func (s *PutItemOutput) SetAttributes(v map[string]*AttributeValue) *PutItemOutput

SetAttributes sets the Attributes field's value.

func (*PutItemOutput) SetConsumedCapacity added in v1.5.0

func (s *PutItemOutput) SetConsumedCapacity(v *ConsumedCapacity) *PutItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*PutItemOutput) SetItemCollectionMetrics added in v1.5.0

func (s *PutItemOutput) SetItemCollectionMetrics(v *ItemCollectionMetrics) *PutItemOutput

SetItemCollectionMetrics sets the ItemCollectionMetrics field's value.

func (PutItemOutput) String added in v0.6.5

func (s PutItemOutput) String() string

String returns the string representation

type PutRequest

type PutRequest struct {

	// A map of attribute name to attribute values, representing the primary key
	// of an item to be processed by PutItem. All of the table's primary key attributes
	// must be specified, and their data types must match those of the table's key
	// schema. If any attributes are present in the item which are part of an index
	// key schema for the table, their types must match the index key schema.
	//
	// Item is a required field
	Item map[string]*AttributeValue `type:"map" required:"true"`
	// contains filtered or unexported fields
}

Represents a request to perform a PutItem operation on an item. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/PutRequest

func (PutRequest) GoString added in v0.6.5

func (s PutRequest) GoString() string

GoString returns the string representation

func (*PutRequest) SetItem added in v1.5.0

func (s *PutRequest) SetItem(v map[string]*AttributeValue) *PutRequest

SetItem sets the Item field's value.

func (PutRequest) String added in v0.6.5

func (s PutRequest) String() string

String returns the string representation

type QueryInput

type QueryInput struct {

	// This is a legacy parameter. Use ProjectionExpression instead. For more information,
	// see AttributesToGet (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributesToGet []*string `min:"1" type:"list"`

	// This is a legacy parameter. Use FilterExpression instead. For more information,
	// see ConditionalOperator (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// Determines the read consistency model: If set to true, then the operation
	// uses strongly consistent reads; otherwise, the operation uses eventually
	// consistent reads.
	//
	// Strongly consistent reads are not supported on global secondary indexes.
	// If you query a global secondary index with ConsistentRead set to true, you
	// will receive a ValidationException.
	ConsistentRead *bool `type:"boolean"`

	// The primary key of the first item that this operation will evaluate. Use
	// the value that was returned for LastEvaluatedKey in the previous operation.
	//
	// The data type for ExclusiveStartKey must be String, Number or Binary. No
	// set data types are allowed.
	ExclusiveStartKey map[string]*AttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	// Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	// { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	// ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A string that contains conditions that DynamoDB applies after the Query operation,
	// but before the data is returned to you. Items that do not satisfy the FilterExpression
	// criteria are not returned.
	//
	// A FilterExpression does not allow key attributes. You cannot define a filter
	// expression based on a partition key or a sort key.
	//
	// A FilterExpression is applied after the items have already been read; the
	// process of filtering does not consume any additional read capacity units.
	//
	// For more information, see Filter Expressions (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#FilteringResults)
	// in the Amazon DynamoDB Developer Guide.
	FilterExpression *string `type:"string"`

	// The name of an index to query. This index can be any local secondary index
	// or global secondary index on the table. Note that if you use the IndexName
	// parameter, you must also provide TableName.
	IndexName *string `min:"3" type:"string"`

	// The condition that specifies the key value(s) for items to be retrieved by
	// the Query action.
	//
	// The condition must perform an equality test on a single partition key value.
	// The condition can also perform one of several comparison tests on a single
	// sort key value. Query can use KeyConditionExpression to retrieve one item
	// with a given partition key value and sort key value, or several items that
	// have the same partition key value but different sort key values.
	//
	// The partition key equality test is required, and must be specified in the
	// following format:
	//
	// partitionKeyName=:partitionkeyval
	//
	// If you also want to provide a condition for the sort key, it must be combined
	// using AND with the condition for the sort key. Following is an example, using
	// the = comparison operator for the sort key:
	//
	// partitionKeyName=:partitionkeyvalANDsortKeyName=:sortkeyval
	//
	// Valid comparisons for the sort key condition are as follows:
	//
	//    * sortKeyName=:sortkeyval - true if the sort key value is equal to :sortkeyval.
	//
	//    * sortKeyName<:sortkeyval - true if the sort key value is less than :sortkeyval.
	//
	//    * sortKeyName<=:sortkeyval - true if the sort key value is less than or
	//    equal to :sortkeyval.
	//
	//    * sortKeyName>:sortkeyval - true if the sort key value is greater than
	//    :sortkeyval.
	//
	//    * sortKeyName>= :sortkeyval - true if the sort key value is greater than
	//    or equal to :sortkeyval.
	//
	//    * sortKeyNameBETWEEN:sortkeyval1AND:sortkeyval2 - true if the sort key
	//    value is greater than or equal to :sortkeyval1, and less than or equal
	//    to :sortkeyval2.
	//
	//    * begins_with (sortKeyName, :sortkeyval) - true if the sort key value
	//    begins with a particular operand. (You cannot use this function with a
	//    sort key that is of type Number.) Note that the function name begins_with
	//    is case-sensitive.
	//
	// Use the ExpressionAttributeValues parameter to replace tokens such as :partitionval
	// and :sortval with actual values at runtime.
	//
	// You can optionally use the ExpressionAttributeNames parameter to replace
	// the names of the partition key and sort key with placeholder tokens. This
	// option might be necessary if an attribute name conflicts with a DynamoDB
	// reserved word. For example, the following KeyConditionExpression parameter
	// causes an error because Size is a reserved word:
	//
	//    * Size = :myval
	//
	// To work around this, define a placeholder (such a #S) to represent the attribute
	// name Size. KeyConditionExpression then is as follows:
	//
	//    * #S = :myval
	//
	// For a list of reserved words, see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// For more information on ExpressionAttributeNames and ExpressionAttributeValues,
	// see Using Placeholders for Attribute Names and Values (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ExpressionPlaceholders.html)
	// in the Amazon DynamoDB Developer Guide.
	KeyConditionExpression *string `type:"string"`

	// This is a legacy parameter. Use KeyConditionExpression instead. For more
	// information, see KeyConditions (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.KeyConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	KeyConditions map[string]*Condition `type:"map"`

	// The maximum number of items to evaluate (not necessarily the number of matching
	// items). If DynamoDB processes the number of items up to the limit while processing
	// the results, it stops the operation and returns the matching values up to
	// that point, and a key in LastEvaluatedKey to apply in a subsequent operation,
	// so that you can pick up where you left off. Also, if the processed data set
	// size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
	// and returns the matching values up to the limit, and a key in LastEvaluatedKey
	// to apply in a subsequent operation to continue the operation. For more information,
	// see Query and Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html)
	// in the Amazon DynamoDB Developer Guide.
	Limit *int64 `min:"1" type:"integer"`

	// A string that identifies one or more attributes to retrieve from the table.
	// These attributes can include scalars, sets, or elements of a JSON document.
	// The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ProjectionExpression *string `type:"string"`

	// This is a legacy parameter. Use FilterExpression instead. For more information,
	// see QueryFilter (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.QueryFilter.html)
	// in the Amazon DynamoDB Developer Guide.
	QueryFilter map[string]*Condition `type:"map"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Specifies the order for index traversal: If true (default), the traversal
	// is performed in ascending order; if false, the traversal is performed in
	// descending order.
	//
	// Items with the same partition key value are stored in sorted order by sort
	// key. If the sort key data type is Number, the results are stored in numeric
	// order. For type String, the results are stored in order of ASCII character
	// code values. For type Binary, DynamoDB treats each byte of the binary data
	// as unsigned.
	//
	// If ScanIndexForward is true, DynamoDB returns the results in the order in
	// which they are stored (by sort key value). This is the default behavior.
	// If ScanIndexForward is false, DynamoDB reads the results in reverse order
	// by sort key value, and then returns the results to the client.
	ScanIndexForward *bool `type:"boolean"`

	// The attributes to be returned in the result. You can retrieve all item attributes,
	// specific item attributes, the count of matching items, or in the case of
	// an index, some or all of the attributes projected into the index.
	//
	//    * ALL_ATTRIBUTES - Returns all of the item attributes from the specified
	//    table or index. If you query a local secondary index, then for each matching
	//    item in the index DynamoDB will fetch the entire item from the parent
	//    table. If the index is configured to project all item attributes, then
	//    all of the data can be obtained from the local secondary index, and no
	//    fetching is required.
	//
	//    * ALL_PROJECTED_ATTRIBUTES - Allowed only when querying an index. Retrieves
	//    all attributes that have been projected into the index. If the index is
	//    configured to project all attributes, this return value is equivalent
	//    to specifying ALL_ATTRIBUTES.
	//
	//    * COUNT - Returns the number of matching items, rather than the matching
	//    items themselves.
	//
	//    * SPECIFIC_ATTRIBUTES - Returns only the attributes listed in AttributesToGet.
	//    This return value is equivalent to specifying AttributesToGet without
	//    specifying any value for Select.
	//
	// If you query or scan a local secondary index and request only attributes
	//    that are projected into that index, the operation will read only the index
	//    and not the table. If any of the requested attributes are not projected
	//    into the local secondary index, DynamoDB will fetch each of these attributes
	//    from the parent table. This extra fetching incurs additional throughput
	//    cost and latency.
	//
	// If you query or scan a global secondary index, you can only request attributes
	//    that are projected into the index. Global secondary index queries cannot
	//    fetch attributes from the parent table.
	//
	// If neither Select nor AttributesToGet are specified, DynamoDB defaults to
	// ALL_ATTRIBUTES when accessing a table, and ALL_PROJECTED_ATTRIBUTES when
	// accessing an index. You cannot use both Select and AttributesToGet together
	// in a single request, unless the value for Select is SPECIFIC_ATTRIBUTES.
	// (This usage is equivalent to specifying AttributesToGet without any value
	// for Select.)
	//
	// If you use the ProjectionExpression parameter, then the value for Select
	// can only be SPECIFIC_ATTRIBUTES. Any other value for Select will return an
	// error.
	Select *string `type:"string" enum:"Select"`

	// The name of the table containing the requested items.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of a Query operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/QueryInput

func (QueryInput) GoString added in v0.6.5

func (s QueryInput) GoString() string

GoString returns the string representation

func (*QueryInput) SetAttributesToGet added in v1.5.0

func (s *QueryInput) SetAttributesToGet(v []*string) *QueryInput

SetAttributesToGet sets the AttributesToGet field's value.

func (*QueryInput) SetConditionalOperator added in v1.5.0

func (s *QueryInput) SetConditionalOperator(v string) *QueryInput

SetConditionalOperator sets the ConditionalOperator field's value.

func (*QueryInput) SetConsistentRead added in v1.5.0

func (s *QueryInput) SetConsistentRead(v bool) *QueryInput

SetConsistentRead sets the ConsistentRead field's value.

func (*QueryInput) SetExclusiveStartKey added in v1.5.0

func (s *QueryInput) SetExclusiveStartKey(v map[string]*AttributeValue) *QueryInput

SetExclusiveStartKey sets the ExclusiveStartKey field's value.

func (*QueryInput) SetExpressionAttributeNames added in v1.5.0

func (s *QueryInput) SetExpressionAttributeNames(v map[string]*string) *QueryInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*QueryInput) SetExpressionAttributeValues added in v1.5.0

func (s *QueryInput) SetExpressionAttributeValues(v map[string]*AttributeValue) *QueryInput

SetExpressionAttributeValues sets the ExpressionAttributeValues field's value.

func (*QueryInput) SetFilterExpression added in v1.5.0

func (s *QueryInput) SetFilterExpression(v string) *QueryInput

SetFilterExpression sets the FilterExpression field's value.

func (*QueryInput) SetIndexName added in v1.5.0

func (s *QueryInput) SetIndexName(v string) *QueryInput

SetIndexName sets the IndexName field's value.

func (*QueryInput) SetKeyConditionExpression added in v1.5.0

func (s *QueryInput) SetKeyConditionExpression(v string) *QueryInput

SetKeyConditionExpression sets the KeyConditionExpression field's value.

func (*QueryInput) SetKeyConditions added in v1.5.0

func (s *QueryInput) SetKeyConditions(v map[string]*Condition) *QueryInput

SetKeyConditions sets the KeyConditions field's value.

func (*QueryInput) SetLimit added in v1.5.0

func (s *QueryInput) SetLimit(v int64) *QueryInput

SetLimit sets the Limit field's value.

func (*QueryInput) SetProjectionExpression added in v1.5.0

func (s *QueryInput) SetProjectionExpression(v string) *QueryInput

SetProjectionExpression sets the ProjectionExpression field's value.

func (*QueryInput) SetQueryFilter added in v1.5.0

func (s *QueryInput) SetQueryFilter(v map[string]*Condition) *QueryInput

SetQueryFilter sets the QueryFilter field's value.

func (*QueryInput) SetReturnConsumedCapacity added in v1.5.0

func (s *QueryInput) SetReturnConsumedCapacity(v string) *QueryInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*QueryInput) SetScanIndexForward added in v1.5.0

func (s *QueryInput) SetScanIndexForward(v bool) *QueryInput

SetScanIndexForward sets the ScanIndexForward field's value.

func (*QueryInput) SetSelect added in v1.5.0

func (s *QueryInput) SetSelect(v string) *QueryInput

SetSelect sets the Select field's value.

func (*QueryInput) SetTableName added in v1.5.0

func (s *QueryInput) SetTableName(v string) *QueryInput

SetTableName sets the TableName field's value.

func (QueryInput) String added in v0.6.5

func (s QueryInput) String() string

String returns the string representation

func (*QueryInput) Validate added in v1.1.21

func (s *QueryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type QueryOutput

type QueryOutput struct {

	// The capacity units consumed by the Query operation. The data returned includes
	// the total provisioned throughput consumed, along with statistics for the
	// table and any indexes involved in the operation. ConsumedCapacity is only
	// returned if the ReturnConsumedCapacity parameter was specified For more information,
	// see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// The number of items in the response.
	//
	// If you used a QueryFilter in the request, then Count is the number of items
	// returned after the filter was applied, and ScannedCount is the number of
	// matching items before the filter was applied.
	//
	// If you did not use a filter in the request, then Count and ScannedCount are
	// the same.
	Count *int64 `type:"integer"`

	// An array of item attributes that match the query criteria. Each element in
	// this array consists of an attribute name and the value for that attribute.
	Items []map[string]*AttributeValue `type:"list"`

	// The primary key of the item where the operation stopped, inclusive of the
	// previous result set. Use this value to start a new operation, excluding this
	// value in the new request.
	//
	// If LastEvaluatedKey is empty, then the "last page" of results has been processed
	// and there is no more data to be retrieved.
	//
	// If LastEvaluatedKey is not empty, it does not necessarily mean that there
	// is more data in the result set. The only way to know when you have reached
	// the end of the result set is when LastEvaluatedKey is empty.
	LastEvaluatedKey map[string]*AttributeValue `type:"map"`

	// The number of items evaluated, before any QueryFilter is applied. A high
	// ScannedCount value with few, or no, Count results indicates an inefficient
	// Query operation. For more information, see Count and ScannedCount (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#Count)
	// in the Amazon DynamoDB Developer Guide.
	//
	// If you did not use a filter in the request, then ScannedCount is the same
	// as Count.
	ScannedCount *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Represents the output of a Query operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/QueryOutput

func (QueryOutput) GoString added in v0.6.5

func (s QueryOutput) GoString() string

GoString returns the string representation

func (*QueryOutput) SetConsumedCapacity added in v1.5.0

func (s *QueryOutput) SetConsumedCapacity(v *ConsumedCapacity) *QueryOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*QueryOutput) SetCount added in v1.5.0

func (s *QueryOutput) SetCount(v int64) *QueryOutput

SetCount sets the Count field's value.

func (*QueryOutput) SetItems added in v1.5.0

func (s *QueryOutput) SetItems(v []map[string]*AttributeValue) *QueryOutput

SetItems sets the Items field's value.

func (*QueryOutput) SetLastEvaluatedKey added in v1.5.0

func (s *QueryOutput) SetLastEvaluatedKey(v map[string]*AttributeValue) *QueryOutput

SetLastEvaluatedKey sets the LastEvaluatedKey field's value.

func (*QueryOutput) SetScannedCount added in v1.5.0

func (s *QueryOutput) SetScannedCount(v int64) *QueryOutput

SetScannedCount sets the ScannedCount field's value.

func (QueryOutput) String added in v0.6.5

func (s QueryOutput) String() string

String returns the string representation

type Replica added in v1.12.36

type Replica struct {

	// The region where the replica needs to be created.
	RegionName *string `type:"string"`
	// contains filtered or unexported fields
}

Represents the properties of a replica. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Replica

func (Replica) GoString added in v1.12.36

func (s Replica) GoString() string

GoString returns the string representation

func (*Replica) SetRegionName added in v1.12.36

func (s *Replica) SetRegionName(v string) *Replica

SetRegionName sets the RegionName field's value.

func (Replica) String added in v1.12.36

func (s Replica) String() string

String returns the string representation

type ReplicaDescription added in v1.12.36

type ReplicaDescription struct {

	// The name of the region.
	RegionName *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the details of the replica. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ReplicaDescription

func (ReplicaDescription) GoString added in v1.12.36

func (s ReplicaDescription) GoString() string

GoString returns the string representation

func (*ReplicaDescription) SetRegionName added in v1.12.36

func (s *ReplicaDescription) SetRegionName(v string) *ReplicaDescription

SetRegionName sets the RegionName field's value.

func (ReplicaDescription) String added in v1.12.36

func (s ReplicaDescription) String() string

String returns the string representation

type ReplicaUpdate added in v1.12.36

type ReplicaUpdate struct {

	// The parameters required for creating a replica on an existing global table.
	Create *CreateReplicaAction `type:"structure"`

	// The name of the existing replica to be removed.
	Delete *DeleteReplicaAction `type:"structure"`
	// contains filtered or unexported fields
}

Represents one of the following:

  • A new replica to be added to an existing global table.

  • New parameters for an existing replica.

  • An existing replica to be removed from an existing global table.

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ReplicaUpdate

func (ReplicaUpdate) GoString added in v1.12.36

func (s ReplicaUpdate) GoString() string

GoString returns the string representation

func (*ReplicaUpdate) SetCreate added in v1.12.36

SetCreate sets the Create field's value.

func (*ReplicaUpdate) SetDelete added in v1.12.36

SetDelete sets the Delete field's value.

func (ReplicaUpdate) String added in v1.12.36

func (s ReplicaUpdate) String() string

String returns the string representation

func (*ReplicaUpdate) Validate added in v1.12.36

func (s *ReplicaUpdate) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RestoreSummary added in v1.12.36

type RestoreSummary struct {

	// Point in time or source backup time.
	//
	// RestoreDateTime is a required field
	RestoreDateTime *time.Time `type:"timestamp" timestampFormat:"unix" required:"true"`

	// Indicates if a restore is in progress or not.
	//
	// RestoreInProgress is a required field
	RestoreInProgress *bool `type:"boolean" required:"true"`

	// ARN of the backup from which the table was restored.
	SourceBackupArn *string `min:"37" type:"string"`

	// ARN of the source table of the backup that is being restored.
	SourceTableArn *string `type:"string"`
	// contains filtered or unexported fields
}

Contains details for the restore. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreSummary

func (RestoreSummary) GoString added in v1.12.36

func (s RestoreSummary) GoString() string

GoString returns the string representation

func (*RestoreSummary) SetRestoreDateTime added in v1.12.36

func (s *RestoreSummary) SetRestoreDateTime(v time.Time) *RestoreSummary

SetRestoreDateTime sets the RestoreDateTime field's value.

func (*RestoreSummary) SetRestoreInProgress added in v1.12.36

func (s *RestoreSummary) SetRestoreInProgress(v bool) *RestoreSummary

SetRestoreInProgress sets the RestoreInProgress field's value.

func (*RestoreSummary) SetSourceBackupArn added in v1.12.36

func (s *RestoreSummary) SetSourceBackupArn(v string) *RestoreSummary

SetSourceBackupArn sets the SourceBackupArn field's value.

func (*RestoreSummary) SetSourceTableArn added in v1.12.36

func (s *RestoreSummary) SetSourceTableArn(v string) *RestoreSummary

SetSourceTableArn sets the SourceTableArn field's value.

func (RestoreSummary) String added in v1.12.36

func (s RestoreSummary) String() string

String returns the string representation

type RestoreTableFromBackupInput added in v1.12.36

type RestoreTableFromBackupInput struct {

	// The ARN associated with the backup.
	//
	// BackupArn is a required field
	BackupArn *string `min:"37" type:"string" required:"true"`

	// The name of the new table to which the backup must be restored.
	//
	// TargetTableName is a required field
	TargetTableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreTableFromBackupInput

func (RestoreTableFromBackupInput) GoString added in v1.12.36

func (s RestoreTableFromBackupInput) GoString() string

GoString returns the string representation

func (*RestoreTableFromBackupInput) SetBackupArn added in v1.12.36

SetBackupArn sets the BackupArn field's value.

func (*RestoreTableFromBackupInput) SetTargetTableName added in v1.12.36

SetTargetTableName sets the TargetTableName field's value.

func (RestoreTableFromBackupInput) String added in v1.12.36

String returns the string representation

func (*RestoreTableFromBackupInput) Validate added in v1.12.36

func (s *RestoreTableFromBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RestoreTableFromBackupOutput added in v1.12.36

type RestoreTableFromBackupOutput struct {

	// The description of the table created from an existing backup.
	TableDescription *TableDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreTableFromBackupOutput

func (RestoreTableFromBackupOutput) GoString added in v1.12.36

func (s RestoreTableFromBackupOutput) GoString() string

GoString returns the string representation

func (*RestoreTableFromBackupOutput) SetTableDescription added in v1.12.36

SetTableDescription sets the TableDescription field's value.

func (RestoreTableFromBackupOutput) String added in v1.12.36

String returns the string representation

type ScanInput

type ScanInput struct {

	// This is a legacy parameter. Use ProjectionExpression instead. For more information,
	// see AttributesToGet (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributesToGet.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributesToGet []*string `min:"1" type:"list"`

	// This is a legacy parameter. Use FilterExpression instead. For more information,
	// see ConditionalOperator (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// A Boolean value that determines the read consistency model during the scan:
	//
	//    * If ConsistentRead is false, then the data returned from Scan might not
	//    contain the results from other recently completed write operations (PutItem,
	//    UpdateItem or DeleteItem).
	//
	//    * If ConsistentRead is true, then all of the write operations that completed
	//    before the Scan began are guaranteed to be contained in the Scan response.
	//
	// The default setting for ConsistentRead is false.
	//
	// The ConsistentRead parameter is not supported on global secondary indexes.
	// If you scan a global secondary index with ConsistentRead set to true, you
	// will receive a ValidationException.
	ConsistentRead *bool `type:"boolean"`

	// The primary key of the first item that this operation will evaluate. Use
	// the value that was returned for LastEvaluatedKey in the previous operation.
	//
	// The data type for ExclusiveStartKey must be String, Number or Binary. No
	// set data types are allowed.
	//
	// In a parallel scan, a Scan request that includes ExclusiveStartKey must specify
	// the same segment whose previous Scan returned the corresponding value of
	// LastEvaluatedKey.
	ExclusiveStartKey map[string]*AttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	// Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	// { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	// ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// A string that contains conditions that DynamoDB applies after the Scan operation,
	// but before the data is returned to you. Items that do not satisfy the FilterExpression
	// criteria are not returned.
	//
	// A FilterExpression is applied after the items have already been read; the
	// process of filtering does not consume any additional read capacity units.
	//
	// For more information, see Filter Expressions (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#FilteringResults)
	// in the Amazon DynamoDB Developer Guide.
	FilterExpression *string `type:"string"`

	// The name of a secondary index to scan. This index can be any local secondary
	// index or global secondary index. Note that if you use the IndexName parameter,
	// you must also provide TableName.
	IndexName *string `min:"3" type:"string"`

	// The maximum number of items to evaluate (not necessarily the number of matching
	// items). If DynamoDB processes the number of items up to the limit while processing
	// the results, it stops the operation and returns the matching values up to
	// that point, and a key in LastEvaluatedKey to apply in a subsequent operation,
	// so that you can pick up where you left off. Also, if the processed data set
	// size exceeds 1 MB before DynamoDB reaches this limit, it stops the operation
	// and returns the matching values up to the limit, and a key in LastEvaluatedKey
	// to apply in a subsequent operation to continue the operation. For more information,
	// see Query and Scan (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html)
	// in the Amazon DynamoDB Developer Guide.
	Limit *int64 `min:"1" type:"integer"`

	// A string that identifies one or more attributes to retrieve from the specified
	// table or index. These attributes can include scalars, sets, or elements of
	// a JSON document. The attributes in the expression must be separated by commas.
	//
	// If no attribute names are specified, then all attributes will be returned.
	// If any of the requested attributes are not found, they will not appear in
	// the result.
	//
	// For more information, see Accessing Item Attributes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ProjectionExpression *string `type:"string"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// This is a legacy parameter. Use FilterExpression instead. For more information,
	// see ScanFilter (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ScanFilter.html)
	// in the Amazon DynamoDB Developer Guide.
	ScanFilter map[string]*Condition `type:"map"`

	// For a parallel Scan request, Segment identifies an individual segment to
	// be scanned by an application worker.
	//
	// Segment IDs are zero-based, so the first segment is always 0. For example,
	// if you want to use four application threads to scan a table or an index,
	// then the first thread specifies a Segment value of 0, the second thread specifies
	// 1, and so on.
	//
	// The value of LastEvaluatedKey returned from a parallel Scan request must
	// be used as ExclusiveStartKey with the same segment ID in a subsequent Scan
	// operation.
	//
	// The value for Segment must be greater than or equal to 0, and less than the
	// value provided for TotalSegments.
	//
	// If you provide Segment, you must also provide TotalSegments.
	Segment *int64 `type:"integer"`

	// The attributes to be returned in the result. You can retrieve all item attributes,
	// specific item attributes, the count of matching items, or in the case of
	// an index, some or all of the attributes projected into the index.
	//
	//    * ALL_ATTRIBUTES - Returns all of the item attributes from the specified
	//    table or index. If you query a local secondary index, then for each matching
	//    item in the index DynamoDB will fetch the entire item from the parent
	//    table. If the index is configured to project all item attributes, then
	//    all of the data can be obtained from the local secondary index, and no
	//    fetching is required.
	//
	//    * ALL_PROJECTED_ATTRIBUTES - Allowed only when querying an index. Retrieves
	//    all attributes that have been projected into the index. If the index is
	//    configured to project all attributes, this return value is equivalent
	//    to specifying ALL_ATTRIBUTES.
	//
	//    * COUNT - Returns the number of matching items, rather than the matching
	//    items themselves.
	//
	//    * SPECIFIC_ATTRIBUTES - Returns only the attributes listed in AttributesToGet.
	//    This return value is equivalent to specifying AttributesToGet without
	//    specifying any value for Select.
	//
	// If you query or scan a local secondary index and request only attributes
	//    that are projected into that index, the operation will read only the index
	//    and not the table. If any of the requested attributes are not projected
	//    into the local secondary index, DynamoDB will fetch each of these attributes
	//    from the parent table. This extra fetching incurs additional throughput
	//    cost and latency.
	//
	// If you query or scan a global secondary index, you can only request attributes
	//    that are projected into the index. Global secondary index queries cannot
	//    fetch attributes from the parent table.
	//
	// If neither Select nor AttributesToGet are specified, DynamoDB defaults to
	// ALL_ATTRIBUTES when accessing a table, and ALL_PROJECTED_ATTRIBUTES when
	// accessing an index. You cannot use both Select and AttributesToGet together
	// in a single request, unless the value for Select is SPECIFIC_ATTRIBUTES.
	// (This usage is equivalent to specifying AttributesToGet without any value
	// for Select.)
	//
	// If you use the ProjectionExpression parameter, then the value for Select
	// can only be SPECIFIC_ATTRIBUTES. Any other value for Select will return an
	// error.
	Select *string `type:"string" enum:"Select"`

	// The name of the table containing the requested items; or, if you provide
	// IndexName, the name of the table to which that index belongs.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`

	// For a parallel Scan request, TotalSegments represents the total number of
	// segments into which the Scan operation will be divided. The value of TotalSegments
	// corresponds to the number of application workers that will perform the parallel
	// scan. For example, if you want to use four application threads to scan a
	// table or an index, specify a TotalSegments value of 4.
	//
	// The value for TotalSegments must be greater than or equal to 1, and less
	// than or equal to 1000000. If you specify a TotalSegments value of 1, the
	// Scan operation will be sequential rather than parallel.
	//
	// If you specify TotalSegments, you must also specify Segment.
	TotalSegments *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Represents the input of a Scan operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ScanInput

func (ScanInput) GoString added in v0.6.5

func (s ScanInput) GoString() string

GoString returns the string representation

func (*ScanInput) SetAttributesToGet added in v1.5.0

func (s *ScanInput) SetAttributesToGet(v []*string) *ScanInput

SetAttributesToGet sets the AttributesToGet field's value.

func (*ScanInput) SetConditionalOperator added in v1.5.0

func (s *ScanInput) SetConditionalOperator(v string) *ScanInput

SetConditionalOperator sets the ConditionalOperator field's value.

func (*ScanInput) SetConsistentRead added in v1.5.0

func (s *ScanInput) SetConsistentRead(v bool) *ScanInput

SetConsistentRead sets the ConsistentRead field's value.

func (*ScanInput) SetExclusiveStartKey added in v1.5.0

func (s *ScanInput) SetExclusiveStartKey(v map[string]*AttributeValue) *ScanInput

SetExclusiveStartKey sets the ExclusiveStartKey field's value.

func (*ScanInput) SetExpressionAttributeNames added in v1.5.0

func (s *ScanInput) SetExpressionAttributeNames(v map[string]*string) *ScanInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*ScanInput) SetExpressionAttributeValues added in v1.5.0

func (s *ScanInput) SetExpressionAttributeValues(v map[string]*AttributeValue) *ScanInput

SetExpressionAttributeValues sets the ExpressionAttributeValues field's value.

func (*ScanInput) SetFilterExpression added in v1.5.0

func (s *ScanInput) SetFilterExpression(v string) *ScanInput

SetFilterExpression sets the FilterExpression field's value.

func (*ScanInput) SetIndexName added in v1.5.0

func (s *ScanInput) SetIndexName(v string) *ScanInput

SetIndexName sets the IndexName field's value.

func (*ScanInput) SetLimit added in v1.5.0

func (s *ScanInput) SetLimit(v int64) *ScanInput

SetLimit sets the Limit field's value.

func (*ScanInput) SetProjectionExpression added in v1.5.0

func (s *ScanInput) SetProjectionExpression(v string) *ScanInput

SetProjectionExpression sets the ProjectionExpression field's value.

func (*ScanInput) SetReturnConsumedCapacity added in v1.5.0

func (s *ScanInput) SetReturnConsumedCapacity(v string) *ScanInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*ScanInput) SetScanFilter added in v1.5.0

func (s *ScanInput) SetScanFilter(v map[string]*Condition) *ScanInput

SetScanFilter sets the ScanFilter field's value.

func (*ScanInput) SetSegment added in v1.5.0

func (s *ScanInput) SetSegment(v int64) *ScanInput

SetSegment sets the Segment field's value.

func (*ScanInput) SetSelect added in v1.5.0

func (s *ScanInput) SetSelect(v string) *ScanInput

SetSelect sets the Select field's value.

func (*ScanInput) SetTableName added in v1.5.0

func (s *ScanInput) SetTableName(v string) *ScanInput

SetTableName sets the TableName field's value.

func (*ScanInput) SetTotalSegments added in v1.5.0

func (s *ScanInput) SetTotalSegments(v int64) *ScanInput

SetTotalSegments sets the TotalSegments field's value.

func (ScanInput) String added in v0.6.5

func (s ScanInput) String() string

String returns the string representation

func (*ScanInput) Validate added in v1.1.21

func (s *ScanInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ScanOutput

type ScanOutput struct {

	// The capacity units consumed by the Scan operation. The data returned includes
	// the total provisioned throughput consumed, along with statistics for the
	// table and any indexes involved in the operation. ConsumedCapacity is only
	// returned if the ReturnConsumedCapacity parameter was specified. For more
	// information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// The number of items in the response.
	//
	// If you set ScanFilter in the request, then Count is the number of items returned
	// after the filter was applied, and ScannedCount is the number of matching
	// items before the filter was applied.
	//
	// If you did not use a filter in the request, then Count is the same as ScannedCount.
	Count *int64 `type:"integer"`

	// An array of item attributes that match the scan criteria. Each element in
	// this array consists of an attribute name and the value for that attribute.
	Items []map[string]*AttributeValue `type:"list"`

	// The primary key of the item where the operation stopped, inclusive of the
	// previous result set. Use this value to start a new operation, excluding this
	// value in the new request.
	//
	// If LastEvaluatedKey is empty, then the "last page" of results has been processed
	// and there is no more data to be retrieved.
	//
	// If LastEvaluatedKey is not empty, it does not necessarily mean that there
	// is more data in the result set. The only way to know when you have reached
	// the end of the result set is when LastEvaluatedKey is empty.
	LastEvaluatedKey map[string]*AttributeValue `type:"map"`

	// The number of items evaluated, before any ScanFilter is applied. A high ScannedCount
	// value with few, or no, Count results indicates an inefficient Scan operation.
	// For more information, see Count and ScannedCount (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/QueryAndScan.html#Count)
	// in the Amazon DynamoDB Developer Guide.
	//
	// If you did not use a filter in the request, then ScannedCount is the same
	// as Count.
	ScannedCount *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Represents the output of a Scan operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/ScanOutput

func (ScanOutput) GoString added in v0.6.5

func (s ScanOutput) GoString() string

GoString returns the string representation

func (*ScanOutput) SetConsumedCapacity added in v1.5.0

func (s *ScanOutput) SetConsumedCapacity(v *ConsumedCapacity) *ScanOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*ScanOutput) SetCount added in v1.5.0

func (s *ScanOutput) SetCount(v int64) *ScanOutput

SetCount sets the Count field's value.

func (*ScanOutput) SetItems added in v1.5.0

func (s *ScanOutput) SetItems(v []map[string]*AttributeValue) *ScanOutput

SetItems sets the Items field's value.

func (*ScanOutput) SetLastEvaluatedKey added in v1.5.0

func (s *ScanOutput) SetLastEvaluatedKey(v map[string]*AttributeValue) *ScanOutput

SetLastEvaluatedKey sets the LastEvaluatedKey field's value.

func (*ScanOutput) SetScannedCount added in v1.5.0

func (s *ScanOutput) SetScannedCount(v int64) *ScanOutput

SetScannedCount sets the ScannedCount field's value.

func (ScanOutput) String added in v0.6.5

func (s ScanOutput) String() string

String returns the string representation

type SourceTableDetails added in v1.12.36

type SourceTableDetails struct {

	// Number of items in the table. Please note this is an approximate value.
	ItemCount *int64 `type:"long"`

	// Schema of the table.
	//
	// KeySchema is a required field
	KeySchema []*KeySchemaElement `min:"1" type:"list" required:"true"`

	// Read IOPs and Write IOPS on the table when the backup was created.
	//
	// ProvisionedThroughput is a required field
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`

	// ARN of the table for which backup was created.
	TableArn *string `type:"string"`

	// Time when the source table was created.
	//
	// TableCreationDateTime is a required field
	TableCreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix" required:"true"`

	// Unique identifier for the table for which the backup was created.
	//
	// TableId is a required field
	TableId *string `type:"string" required:"true"`

	// The name of the table for which the backup was created.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`

	// Size of the table in bytes. Please note this is an approximate value.
	TableSizeBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

Contains the details of the table when the backup was created. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/SourceTableDetails

func (SourceTableDetails) GoString added in v1.12.36

func (s SourceTableDetails) GoString() string

GoString returns the string representation

func (*SourceTableDetails) SetItemCount added in v1.12.36

func (s *SourceTableDetails) SetItemCount(v int64) *SourceTableDetails

SetItemCount sets the ItemCount field's value.

func (*SourceTableDetails) SetKeySchema added in v1.12.36

SetKeySchema sets the KeySchema field's value.

func (*SourceTableDetails) SetProvisionedThroughput added in v1.12.36

func (s *SourceTableDetails) SetProvisionedThroughput(v *ProvisionedThroughput) *SourceTableDetails

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (*SourceTableDetails) SetTableArn added in v1.12.36

func (s *SourceTableDetails) SetTableArn(v string) *SourceTableDetails

SetTableArn sets the TableArn field's value.

func (*SourceTableDetails) SetTableCreationDateTime added in v1.12.36

func (s *SourceTableDetails) SetTableCreationDateTime(v time.Time) *SourceTableDetails

SetTableCreationDateTime sets the TableCreationDateTime field's value.

func (*SourceTableDetails) SetTableId added in v1.12.36

func (s *SourceTableDetails) SetTableId(v string) *SourceTableDetails

SetTableId sets the TableId field's value.

func (*SourceTableDetails) SetTableName added in v1.12.36

func (s *SourceTableDetails) SetTableName(v string) *SourceTableDetails

SetTableName sets the TableName field's value.

func (*SourceTableDetails) SetTableSizeBytes added in v1.12.36

func (s *SourceTableDetails) SetTableSizeBytes(v int64) *SourceTableDetails

SetTableSizeBytes sets the TableSizeBytes field's value.

func (SourceTableDetails) String added in v1.12.36

func (s SourceTableDetails) String() string

String returns the string representation

type SourceTableFeatureDetails added in v1.12.36

type SourceTableFeatureDetails struct {

	// Represents the GSI properties for the table when the backup was created.
	// It includes the IndexName, KeySchema, Projection and ProvisionedThroughput
	// for the GSIs on the table at the time of backup.
	GlobalSecondaryIndexes []*GlobalSecondaryIndexInfo `type:"list"`

	// Represents the LSI properties for the table when the backup was created.
	// It includes the IndexName, KeySchema and Projection for the LSIs on the table
	// at the time of backup.
	LocalSecondaryIndexes []*LocalSecondaryIndexInfo `type:"list"`

	// Stream settings on the table when the backup was created.
	StreamDescription *StreamSpecification `type:"structure"`

	// Time to Live settings on the table when the backup was created.
	TimeToLiveDescription *TimeToLiveDescription `type:"structure"`
	// contains filtered or unexported fields
}

Contains the details of the features enabled on the table when the backup was created. For example, LSIs, GSIs, streams, TTL. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/SourceTableFeatureDetails

func (SourceTableFeatureDetails) GoString added in v1.12.36

func (s SourceTableFeatureDetails) GoString() string

GoString returns the string representation

func (*SourceTableFeatureDetails) SetGlobalSecondaryIndexes added in v1.12.36

SetGlobalSecondaryIndexes sets the GlobalSecondaryIndexes field's value.

func (*SourceTableFeatureDetails) SetLocalSecondaryIndexes added in v1.12.36

SetLocalSecondaryIndexes sets the LocalSecondaryIndexes field's value.

func (*SourceTableFeatureDetails) SetStreamDescription added in v1.12.36

SetStreamDescription sets the StreamDescription field's value.

func (*SourceTableFeatureDetails) SetTimeToLiveDescription added in v1.12.36

SetTimeToLiveDescription sets the TimeToLiveDescription field's value.

func (SourceTableFeatureDetails) String added in v1.12.36

func (s SourceTableFeatureDetails) String() string

String returns the string representation

type StreamSpecification added in v0.6.7

type StreamSpecification struct {

	// Indicates whether DynamoDB Streams is enabled (true) or disabled (false)
	// on the table.
	StreamEnabled *bool `type:"boolean"`

	// When an item in the table is modified, StreamViewType determines what information
	// is written to the stream for this table. Valid values for StreamViewType
	// are:
	//
	//    * KEYS_ONLY - Only the key attributes of the modified item are written
	//    to the stream.
	//
	//    * NEW_IMAGE - The entire item, as it appears after it was modified, is
	//    written to the stream.
	//
	//    * OLD_IMAGE - The entire item, as it appeared before it was modified,
	//    is written to the stream.
	//
	//    * NEW_AND_OLD_IMAGES - Both the new and the old item images of the item
	//    are written to the stream.
	StreamViewType *string `type:"string" enum:"StreamViewType"`
	// contains filtered or unexported fields
}

Represents the DynamoDB Streams configuration for a table in DynamoDB. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/StreamSpecification

func (StreamSpecification) GoString added in v0.6.7

func (s StreamSpecification) GoString() string

GoString returns the string representation

func (*StreamSpecification) SetStreamEnabled added in v1.5.0

func (s *StreamSpecification) SetStreamEnabled(v bool) *StreamSpecification

SetStreamEnabled sets the StreamEnabled field's value.

func (*StreamSpecification) SetStreamViewType added in v1.5.0

func (s *StreamSpecification) SetStreamViewType(v string) *StreamSpecification

SetStreamViewType sets the StreamViewType field's value.

func (StreamSpecification) String added in v0.6.7

func (s StreamSpecification) String() string

String returns the string representation

type TableDescription

type TableDescription struct {

	// An array of AttributeDefinition objects. Each of these objects describes
	// one attribute in the table and index key schema.
	//
	// Each AttributeDefinition object in this array is composed of:
	//
	//    * AttributeName - The name of the attribute.
	//
	//    * AttributeType - The data type for the attribute.
	AttributeDefinitions []*AttributeDefinition `type:"list"`

	// The date and time when the table was created, in UNIX epoch time (http://www.epochconverter.com/)
	// format.
	CreationDateTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The global secondary indexes, if any, on the table. Each index is scoped
	// to a given partition key value. Each element is composed of:
	//
	//    * Backfilling - If true, then the index is currently in the backfilling
	//    phase. Backfilling occurs only when a new global secondary index is added
	//    to the table; it is the process by which DynamoDB populates the new index
	//    with data from the table. (This attribute does not appear for indexes
	//    that were created during a CreateTable operation.)
	//
	//    * IndexName - The name of the global secondary index.
	//
	//    * IndexSizeBytes - The total size of the global secondary index, in bytes.
	//    DynamoDB updates this value approximately every six hours. Recent changes
	//    might not be reflected in this value.
	//
	//    * IndexStatus - The current status of the global secondary index:
	//
	// CREATING - The index is being created.
	//
	// UPDATING - The index is being updated.
	//
	// DELETING - The index is being deleted.
	//
	// ACTIVE - The index is ready for use.
	//
	//    * ItemCount - The number of items in the global secondary index. DynamoDB
	//    updates this value approximately every six hours. Recent changes might
	//    not be reflected in this value.
	//
	//    * KeySchema - Specifies the complete index key schema. The attribute names
	//    in the key schema must be between 1 and 255 characters (inclusive). The
	//    key schema must begin with the same partition key as the table.
	//
	//    * Projection - Specifies attributes that are copied (projected) from the
	//    table into the index. These are in addition to the primary key attributes
	//    and index key attributes, which are automatically projected. Each attribute
	//    specification is composed of:
	//
	// ProjectionType - One of the following:
	//
	// KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	// INCLUDE - Only the specified table attributes are projected into the index.
	//    The list of projected attributes are in NonKeyAttributes.
	//
	// ALL - All of the table attributes are projected into the index.
	//
	// NonKeyAttributes - A list of one or more non-key attribute names that are
	//    projected into the secondary index. The total count of attributes provided
	//    in NonKeyAttributes, summed across all of the secondary indexes, must
	//    not exceed 20. If you project the same attribute into two different indexes,
	//    this counts as two distinct attributes when determining the total.
	//
	//    * ProvisionedThroughput - The provisioned throughput settings for the
	//    global secondary index, consisting of read and write capacity units, along
	//    with data about increases and decreases.
	//
	// If the table is in the DELETING state, no information about indexes will
	// be returned.
	GlobalSecondaryIndexes []*GlobalSecondaryIndexDescription `type:"list"`

	// The number of items in the specified table. DynamoDB updates this value approximately
	// every six hours. Recent changes might not be reflected in this value.
	ItemCount *int64 `type:"long"`

	// The primary key structure for the table. Each KeySchemaElement consists of:
	//
	//    * AttributeName - The name of the attribute.
	//
	//    * KeyType - The role of the attribute:
	//
	// HASH - partition key
	//
	// RANGE - sort key
	//
	// The partition key of an item is also known as its hash attribute. The term
	//    "hash attribute" derives from DynamoDB' usage of an internal hash function
	//    to evenly distribute data items across partitions, based on their partition
	//    key values.
	//
	// The sort key of an item is also known as its range attribute. The term "range
	//    attribute" derives from the way DynamoDB stores items with the same partition
	//    key physically close together, in sorted order by the sort key value.
	//
	// For more information about primary keys, see Primary Key (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DataModel.html#DataModelPrimaryKey)
	// in the Amazon DynamoDB Developer Guide.
	KeySchema []*KeySchemaElement `min:"1" type:"list"`

	// The Amazon Resource Name (ARN) that uniquely identifies the latest stream
	// for this table.
	LatestStreamArn *string `min:"37" type:"string"`

	// A timestamp, in ISO 8601 format, for this stream.
	//
	// Note that LatestStreamLabel is not a unique identifier for the stream, because
	// it is possible that a stream from another table might have the same timestamp.
	// However, the combination of the following three elements is guaranteed to
	// be unique:
	//
	//    * the AWS customer ID.
	//
	//    * the table name.
	//
	//    * the StreamLabel.
	LatestStreamLabel *string `type:"string"`

	// Represents one or more local secondary indexes on the table. Each index is
	// scoped to a given partition key value. Tables with one or more local secondary
	// indexes are subject to an item collection size limit, where the amount of
	// data within a given item collection cannot exceed 10 GB. Each element is
	// composed of:
	//
	//    * IndexName - The name of the local secondary index.
	//
	//    * KeySchema - Specifies the complete index key schema. The attribute names
	//    in the key schema must be between 1 and 255 characters (inclusive). The
	//    key schema must begin with the same partition key as the table.
	//
	//    * Projection - Specifies attributes that are copied (projected) from the
	//    table into the index. These are in addition to the primary key attributes
	//    and index key attributes, which are automatically projected. Each attribute
	//    specification is composed of:
	//
	// ProjectionType - One of the following:
	//
	// KEYS_ONLY - Only the index and primary keys are projected into the index.
	//
	// INCLUDE - Only the specified table attributes are projected into the index.
	//    The list of projected attributes are in NonKeyAttributes.
	//
	// ALL - All of the table attributes are projected into the index.
	//
	// NonKeyAttributes - A list of one or more non-key attribute names that are
	//    projected into the secondary index. The total count of attributes provided
	//    in NonKeyAttributes, summed across all of the secondary indexes, must
	//    not exceed 20. If you project the same attribute into two different indexes,
	//    this counts as two distinct attributes when determining the total.
	//
	//    * IndexSizeBytes - Represents the total size of the index, in bytes. DynamoDB
	//    updates this value approximately every six hours. Recent changes might
	//    not be reflected in this value.
	//
	//    * ItemCount - Represents the number of items in the index. DynamoDB updates
	//    this value approximately every six hours. Recent changes might not be
	//    reflected in this value.
	//
	// If the table is in the DELETING state, no information about indexes will
	// be returned.
	LocalSecondaryIndexes []*LocalSecondaryIndexDescription `type:"list"`

	// The provisioned throughput settings for the table, consisting of read and
	// write capacity units, along with data about increases and decreases.
	ProvisionedThroughput *ProvisionedThroughputDescription `type:"structure"`

	// Contains details for the restore.
	RestoreSummary *RestoreSummary `type:"structure"`

	// The current DynamoDB Streams configuration for the table.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The Amazon Resource Name (ARN) that uniquely identifies the table.
	TableArn *string `type:"string"`

	// Unique identifier for the table for which the backup was created.
	TableId *string `type:"string"`

	// The name of the table.
	TableName *string `min:"3" type:"string"`

	// The total size of the specified table, in bytes. DynamoDB updates this value
	// approximately every six hours. Recent changes might not be reflected in this
	// value.
	TableSizeBytes *int64 `type:"long"`

	// The current state of the table:
	//
	//    * CREATING - The table is being created.
	//
	//    * UPDATING - The table is being updated.
	//
	//    * DELETING - The table is being deleted.
	//
	//    * ACTIVE - The table is ready for use.
	TableStatus *string `type:"string" enum:"TableStatus"`
	// contains filtered or unexported fields
}

Represents the properties of a table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TableDescription

func (TableDescription) GoString added in v0.6.5

func (s TableDescription) GoString() string

GoString returns the string representation

func (*TableDescription) SetAttributeDefinitions added in v1.5.0

func (s *TableDescription) SetAttributeDefinitions(v []*AttributeDefinition) *TableDescription

SetAttributeDefinitions sets the AttributeDefinitions field's value.

func (*TableDescription) SetCreationDateTime added in v1.5.0

func (s *TableDescription) SetCreationDateTime(v time.Time) *TableDescription

SetCreationDateTime sets the CreationDateTime field's value.

func (*TableDescription) SetGlobalSecondaryIndexes added in v1.5.0

func (s *TableDescription) SetGlobalSecondaryIndexes(v []*GlobalSecondaryIndexDescription) *TableDescription

SetGlobalSecondaryIndexes sets the GlobalSecondaryIndexes field's value.

func (*TableDescription) SetItemCount added in v1.5.0

func (s *TableDescription) SetItemCount(v int64) *TableDescription

SetItemCount sets the ItemCount field's value.

func (*TableDescription) SetKeySchema added in v1.5.0

func (s *TableDescription) SetKeySchema(v []*KeySchemaElement) *TableDescription

SetKeySchema sets the KeySchema field's value.

func (*TableDescription) SetLatestStreamArn added in v1.5.0

func (s *TableDescription) SetLatestStreamArn(v string) *TableDescription

SetLatestStreamArn sets the LatestStreamArn field's value.

func (*TableDescription) SetLatestStreamLabel added in v1.5.0

func (s *TableDescription) SetLatestStreamLabel(v string) *TableDescription

SetLatestStreamLabel sets the LatestStreamLabel field's value.

func (*TableDescription) SetLocalSecondaryIndexes added in v1.5.0

func (s *TableDescription) SetLocalSecondaryIndexes(v []*LocalSecondaryIndexDescription) *TableDescription

SetLocalSecondaryIndexes sets the LocalSecondaryIndexes field's value.

func (*TableDescription) SetProvisionedThroughput added in v1.5.0

func (s *TableDescription) SetProvisionedThroughput(v *ProvisionedThroughputDescription) *TableDescription

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (*TableDescription) SetRestoreSummary added in v1.12.36

func (s *TableDescription) SetRestoreSummary(v *RestoreSummary) *TableDescription

SetRestoreSummary sets the RestoreSummary field's value.

func (*TableDescription) SetStreamSpecification added in v1.5.0

func (s *TableDescription) SetStreamSpecification(v *StreamSpecification) *TableDescription

SetStreamSpecification sets the StreamSpecification field's value.

func (*TableDescription) SetTableArn added in v1.5.0

func (s *TableDescription) SetTableArn(v string) *TableDescription

SetTableArn sets the TableArn field's value.

func (*TableDescription) SetTableId added in v1.12.36

func (s *TableDescription) SetTableId(v string) *TableDescription

SetTableId sets the TableId field's value.

func (*TableDescription) SetTableName added in v1.5.0

func (s *TableDescription) SetTableName(v string) *TableDescription

SetTableName sets the TableName field's value.

func (*TableDescription) SetTableSizeBytes added in v1.5.0

func (s *TableDescription) SetTableSizeBytes(v int64) *TableDescription

SetTableSizeBytes sets the TableSizeBytes field's value.

func (*TableDescription) SetTableStatus added in v1.5.0

func (s *TableDescription) SetTableStatus(v string) *TableDescription

SetTableStatus sets the TableStatus field's value.

func (TableDescription) String added in v0.6.5

func (s TableDescription) String() string

String returns the string representation

type Tag added in v1.6.12

type Tag struct {

	// The key of the tag.Tag keys are case sensitive. Each DynamoDB table can only
	// have up to one tag with the same key. If you try to add an existing tag (same
	// key), the existing tag value will be updated to the new value.
	//
	// Key is a required field
	Key *string `min:"1" type:"string" required:"true"`

	// The value of the tag. Tag values are case-sensitive and can be null.
	//
	// Value is a required field
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a tag. A tag is a key-value pair. You can add up to 50 tags to a single DynamoDB table.

AWS-assigned tag names and values are automatically assigned the aws: prefix, which the user cannot assign. AWS-assigned tag names do not count towards the tag limit of 50. User-assigned tag names have the prefix user: in the Cost Allocation Report. You cannot backdate the application of a tag.

For an overview on tagging DynamoDB resources, see Tagging for DynamoDB (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html) in the Amazon DynamoDB Developer Guide. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/Tag

func (Tag) GoString added in v1.6.12

func (s Tag) GoString() string

GoString returns the string representation

func (*Tag) SetKey added in v1.6.12

func (s *Tag) SetKey(v string) *Tag

SetKey sets the Key field's value.

func (*Tag) SetValue added in v1.6.12

func (s *Tag) SetValue(v string) *Tag

SetValue sets the Value field's value.

func (Tag) String added in v1.6.12

func (s Tag) String() string

String returns the string representation

func (*Tag) Validate added in v1.6.12

func (s *Tag) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagResourceInput added in v1.6.12

type TagResourceInput struct {

	// Identifies the Amazon DynamoDB resource to which tags should be added. This
	// value is an Amazon Resource Name (ARN).
	//
	// ResourceArn is a required field
	ResourceArn *string `min:"1" type:"string" required:"true"`

	// The tags to be assigned to the Amazon DynamoDB resource.
	//
	// Tags is a required field
	Tags []*Tag `type:"list" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TagResourceInput

func (TagResourceInput) GoString added in v1.6.12

func (s TagResourceInput) GoString() string

GoString returns the string representation

func (*TagResourceInput) SetResourceArn added in v1.6.12

func (s *TagResourceInput) SetResourceArn(v string) *TagResourceInput

SetResourceArn sets the ResourceArn field's value.

func (*TagResourceInput) SetTags added in v1.6.12

func (s *TagResourceInput) SetTags(v []*Tag) *TagResourceInput

SetTags sets the Tags field's value.

func (TagResourceInput) String added in v1.6.12

func (s TagResourceInput) String() string

String returns the string representation

func (*TagResourceInput) Validate added in v1.6.12

func (s *TagResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagResourceOutput added in v1.6.12

type TagResourceOutput struct {
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TagResourceOutput

func (TagResourceOutput) GoString added in v1.6.12

func (s TagResourceOutput) GoString() string

GoString returns the string representation

func (TagResourceOutput) String added in v1.6.12

func (s TagResourceOutput) String() string

String returns the string representation

type TimeToLiveDescription added in v1.7.2

type TimeToLiveDescription struct {

	// The name of the Time to Live attribute for items in the table.
	AttributeName *string `min:"1" type:"string"`

	// The Time to Live status for the table.
	TimeToLiveStatus *string `type:"string" enum:"TimeToLiveStatus"`
	// contains filtered or unexported fields
}

The description of the Time to Live (TTL) status on the specified table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TimeToLiveDescription

func (TimeToLiveDescription) GoString added in v1.7.2

func (s TimeToLiveDescription) GoString() string

GoString returns the string representation

func (*TimeToLiveDescription) SetAttributeName added in v1.7.2

func (s *TimeToLiveDescription) SetAttributeName(v string) *TimeToLiveDescription

SetAttributeName sets the AttributeName field's value.

func (*TimeToLiveDescription) SetTimeToLiveStatus added in v1.7.2

func (s *TimeToLiveDescription) SetTimeToLiveStatus(v string) *TimeToLiveDescription

SetTimeToLiveStatus sets the TimeToLiveStatus field's value.

func (TimeToLiveDescription) String added in v1.7.2

func (s TimeToLiveDescription) String() string

String returns the string representation

type TimeToLiveSpecification added in v1.7.2

type TimeToLiveSpecification struct {

	// The name of the Time to Live attribute used to store the expiration time
	// for items in the table.
	//
	// AttributeName is a required field
	AttributeName *string `min:"1" type:"string" required:"true"`

	// Indicates whether Time To Live is to be enabled (true) or disabled (false)
	// on the table.
	//
	// Enabled is a required field
	Enabled *bool `type:"boolean" required:"true"`
	// contains filtered or unexported fields
}

Represents the settings used to enable or disable Time to Live for the specified table. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TimeToLiveSpecification

func (TimeToLiveSpecification) GoString added in v1.7.2

func (s TimeToLiveSpecification) GoString() string

GoString returns the string representation

func (*TimeToLiveSpecification) SetAttributeName added in v1.7.2

func (s *TimeToLiveSpecification) SetAttributeName(v string) *TimeToLiveSpecification

SetAttributeName sets the AttributeName field's value.

func (*TimeToLiveSpecification) SetEnabled added in v1.7.2

SetEnabled sets the Enabled field's value.

func (TimeToLiveSpecification) String added in v1.7.2

func (s TimeToLiveSpecification) String() string

String returns the string representation

func (*TimeToLiveSpecification) Validate added in v1.7.2

func (s *TimeToLiveSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UntagResourceInput added in v1.6.12

type UntagResourceInput struct {

	// The Amazon DyanamoDB resource the tags will be removed from. This value is
	// an Amazon Resource Name (ARN).
	//
	// ResourceArn is a required field
	ResourceArn *string `min:"1" type:"string" required:"true"`

	// A list of tag keys. Existing tags of the resource whose keys are members
	// of this list will be removed from the Amazon DynamoDB resource.
	//
	// TagKeys is a required field
	TagKeys []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UntagResourceInput

func (UntagResourceInput) GoString added in v1.6.12

func (s UntagResourceInput) GoString() string

GoString returns the string representation

func (*UntagResourceInput) SetResourceArn added in v1.6.12

func (s *UntagResourceInput) SetResourceArn(v string) *UntagResourceInput

SetResourceArn sets the ResourceArn field's value.

func (*UntagResourceInput) SetTagKeys added in v1.6.12

func (s *UntagResourceInput) SetTagKeys(v []*string) *UntagResourceInput

SetTagKeys sets the TagKeys field's value.

func (UntagResourceInput) String added in v1.6.12

func (s UntagResourceInput) String() string

String returns the string representation

func (*UntagResourceInput) Validate added in v1.6.12

func (s *UntagResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UntagResourceOutput added in v1.6.12

type UntagResourceOutput struct {
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UntagResourceOutput

func (UntagResourceOutput) GoString added in v1.6.12

func (s UntagResourceOutput) GoString() string

GoString returns the string representation

func (UntagResourceOutput) String added in v1.6.12

func (s UntagResourceOutput) String() string

String returns the string representation

type UpdateGlobalSecondaryIndexAction

type UpdateGlobalSecondaryIndexAction struct {

	// The name of the global secondary index to be updated.
	//
	// IndexName is a required field
	IndexName *string `min:"3" type:"string" required:"true"`

	// Represents the provisioned throughput settings for the specified global secondary
	// index.
	//
	// For current minimum and maximum provisioned throughput values, see Limits
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// in the Amazon DynamoDB Developer Guide.
	//
	// ProvisionedThroughput is a required field
	ProvisionedThroughput *ProvisionedThroughput `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents the new provisioned throughput settings to be applied to a global secondary index. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateGlobalSecondaryIndexAction

func (UpdateGlobalSecondaryIndexAction) GoString added in v0.6.5

GoString returns the string representation

func (*UpdateGlobalSecondaryIndexAction) SetIndexName added in v1.5.0

SetIndexName sets the IndexName field's value.

func (*UpdateGlobalSecondaryIndexAction) SetProvisionedThroughput added in v1.5.0

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (UpdateGlobalSecondaryIndexAction) String added in v0.6.5

String returns the string representation

func (*UpdateGlobalSecondaryIndexAction) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type UpdateGlobalTableInput added in v1.12.36

type UpdateGlobalTableInput struct {

	// The global table name.
	//
	// GlobalTableName is a required field
	GlobalTableName *string `min:"3" type:"string" required:"true"`

	// A list of regions that should be added or removed from the global table.
	//
	// ReplicaUpdates is a required field
	ReplicaUpdates []*ReplicaUpdate `type:"list" required:"true"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateGlobalTableInput

func (UpdateGlobalTableInput) GoString added in v1.12.36

func (s UpdateGlobalTableInput) GoString() string

GoString returns the string representation

func (*UpdateGlobalTableInput) SetGlobalTableName added in v1.12.36

func (s *UpdateGlobalTableInput) SetGlobalTableName(v string) *UpdateGlobalTableInput

SetGlobalTableName sets the GlobalTableName field's value.

func (*UpdateGlobalTableInput) SetReplicaUpdates added in v1.12.36

func (s *UpdateGlobalTableInput) SetReplicaUpdates(v []*ReplicaUpdate) *UpdateGlobalTableInput

SetReplicaUpdates sets the ReplicaUpdates field's value.

func (UpdateGlobalTableInput) String added in v1.12.36

func (s UpdateGlobalTableInput) String() string

String returns the string representation

func (*UpdateGlobalTableInput) Validate added in v1.12.36

func (s *UpdateGlobalTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateGlobalTableOutput added in v1.12.36

type UpdateGlobalTableOutput struct {

	// Contains the details of the global table.
	GlobalTableDescription *GlobalTableDescription `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateGlobalTableOutput

func (UpdateGlobalTableOutput) GoString added in v1.12.36

func (s UpdateGlobalTableOutput) GoString() string

GoString returns the string representation

func (*UpdateGlobalTableOutput) SetGlobalTableDescription added in v1.12.36

SetGlobalTableDescription sets the GlobalTableDescription field's value.

func (UpdateGlobalTableOutput) String added in v1.12.36

func (s UpdateGlobalTableOutput) String() string

String returns the string representation

type UpdateItemInput

type UpdateItemInput struct {

	// This is a legacy parameter. Use UpdateExpression instead. For more information,
	// see AttributeUpdates (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.AttributeUpdates.html)
	// in the Amazon DynamoDB Developer Guide.
	AttributeUpdates map[string]*AttributeValueUpdate `type:"map"`

	// A condition that must be satisfied in order for a conditional update to succeed.
	//
	// An expression can contain any of the following:
	//
	//    * Functions: attribute_exists | attribute_not_exists | attribute_type
	//    | contains | begins_with | size
	//
	// These function names are case-sensitive.
	//
	//    * Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN
	//
	//    *  Logical operators: AND | OR | NOT
	//
	// For more information on condition expressions, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionExpression *string `type:"string"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see ConditionalOperator (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html)
	// in the Amazon DynamoDB Developer Guide.
	ConditionalOperator *string `type:"string" enum:"ConditionalOperator"`

	// This is a legacy parameter. Use ConditionExpression instead. For more information,
	// see Expected (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.Expected.html)
	// in the Amazon DynamoDB Developer Guide.
	Expected map[string]*ExpectedAttributeValue `type:"map"`

	// One or more substitution tokens for attribute names in an expression. The
	// following are some use cases for using ExpressionAttributeNames:
	//
	//    * To access an attribute whose name conflicts with a DynamoDB reserved
	//    word.
	//
	//    * To create a placeholder for repeating occurrences of an attribute name
	//    in an expression.
	//
	//    * To prevent special characters in an attribute name from being misinterpreted
	//    in an expression.
	//
	// Use the # character in an expression to dereference an attribute name. For
	// example, consider the following attribute name:
	//
	//    * Percentile
	//
	// The name of this attribute conflicts with a reserved word, so it cannot be
	// used directly in an expression. (For the complete list of reserved words,
	// see Reserved Words (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ReservedWords.html)
	// in the Amazon DynamoDB Developer Guide). To work around this, you could specify
	// the following for ExpressionAttributeNames:
	//
	//    * {"#P":"Percentile"}
	//
	// You could then use this substitution in an expression, as in this example:
	//
	//    * #P = :val
	//
	// Tokens that begin with the : character are expression attribute values, which
	// are placeholders for the actual value at runtime.
	//
	// For more information on expression attribute names, see Accessing Item Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.AccessingItemAttributes.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeNames map[string]*string `type:"map"`

	// One or more values that can be substituted in an expression.
	//
	// Use the : (colon) character in an expression to dereference an attribute
	// value. For example, suppose that you wanted to check whether the value of
	// the ProductStatus attribute was one of the following:
	//
	// Available | Backordered | Discontinued
	//
	// You would first need to specify ExpressionAttributeValues as follows:
	//
	// { ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"}
	// }
	//
	// You could then use these values in an expression, such as this:
	//
	// ProductStatus IN (:avail, :back, :disc)
	//
	// For more information on expression attribute values, see Specifying Conditions
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.SpecifyingConditions.html)
	// in the Amazon DynamoDB Developer Guide.
	ExpressionAttributeValues map[string]*AttributeValue `type:"map"`

	// The primary key of the item to be updated. Each element consists of an attribute
	// name and a value for that attribute.
	//
	// For the primary key, you must provide all of the attributes. For example,
	// with a simple primary key, you only need to provide a value for the partition
	// key. For a composite primary key, you must provide values for both the partition
	// key and the sort key.
	//
	// Key is a required field
	Key map[string]*AttributeValue `type:"map" required:"true"`

	// Determines the level of detail about provisioned throughput consumption that
	// is returned in the response:
	//
	//    * INDEXES - The response includes the aggregate ConsumedCapacity for the
	//    operation, together with ConsumedCapacity for each table and secondary
	//    index that was accessed.
	//
	// Note that some operations, such as GetItem and BatchGetItem, do not access
	//    any indexes at all. In these cases, specifying INDEXES will only return
	//    ConsumedCapacity information for table(s).
	//
	//    * TOTAL - The response includes only the aggregate ConsumedCapacity for
	//    the operation.
	//
	//    * NONE - No ConsumedCapacity details are included in the response.
	ReturnConsumedCapacity *string `type:"string" enum:"ReturnConsumedCapacity"`

	// Determines whether item collection metrics are returned. If set to SIZE,
	// the response includes statistics about item collections, if any, that were
	// modified during the operation are returned in the response. If set to NONE
	// (the default), no statistics are returned.
	ReturnItemCollectionMetrics *string `type:"string" enum:"ReturnItemCollectionMetrics"`

	// Use ReturnValues if you want to get the item attributes as they appear before
	// or after they are updated. For UpdateItem, the valid values are:
	//
	//    * NONE - If ReturnValues is not specified, or if its value is NONE, then
	//    nothing is returned. (This setting is the default for ReturnValues.)
	//
	//    * ALL_OLD - Returns all of the attributes of the item, as they appeared
	//    before the UpdateItem operation.
	//
	//    * UPDATED_OLD - Returns only the updated attributes, as they appeared
	//    before the UpdateItem operation.
	//
	//    * ALL_NEW - Returns all of the attributes of the item, as they appear
	//    after the UpdateItem operation.
	//
	//    * UPDATED_NEW - Returns only the updated attributes, as they appear after
	//    the UpdateItem operation.
	//
	// There is no additional cost associated with requesting a return value aside
	// from the small network and processing overhead of receiving a larger response.
	// No read capacity units are consumed.
	//
	// The values returned are strongly consistent.
	ReturnValues *string `type:"string" enum:"ReturnValue"`

	// The name of the table containing the item to update.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`

	// An expression that defines one or more attributes to be updated, the action
	// to be performed on them, and new value(s) for them.
	//
	// The following action values are available for UpdateExpression.
	//
	//    * SET - Adds one or more attributes and values to an item. If any of these
	//    attribute already exist, they are replaced by the new values. You can
	//    also use SET to add or subtract from an attribute that is of type Number.
	//    For example: SET myNum = myNum + :val
	//
	// SET supports the following functions:
	//
	// if_not_exists (path, operand) - if the item does not contain an attribute
	//    at the specified path, then if_not_exists evaluates to operand; otherwise,
	//    it evaluates to path. You can use this function to avoid overwriting an
	//    attribute that may already be present in the item.
	//
	// list_append (operand, operand) - evaluates to a list with a new element added
	//    to it. You can append the new element to the start or the end of the list
	//    by reversing the order of the operands.
	//
	// These function names are case-sensitive.
	//
	//    * REMOVE - Removes one or more attributes from an item.
	//
	//    * ADD - Adds the specified value to the item, if the attribute does not
	//    already exist. If the attribute does exist, then the behavior of ADD depends
	//    on the data type of the attribute:
	//
	// If the existing attribute is a number, and if Value is also a number, then
	//    Value is mathematically added to the existing attribute. If Value is a
	//    negative number, then it is subtracted from the existing attribute.
	//
	// If you use ADD to increment or decrement a number value for an item that
	//    doesn't exist before the update, DynamoDB uses 0 as the initial value.
	//
	// Similarly, if you use ADD for an existing item to increment or decrement
	//    an attribute value that doesn't exist before the update, DynamoDB uses
	//    0 as the initial value. For example, suppose that the item you want to
	//    update doesn't have an attribute named itemcount, but you decide to ADD
	//    the number 3 to this attribute anyway. DynamoDB will create the itemcount
	//    attribute, set its initial value to 0, and finally add 3 to it. The result
	//    will be a new itemcount attribute in the item, with a value of 3.
	//
	// If the existing data type is a set and if Value is also a set, then Value
	//    is added to the existing set. For example, if the attribute value is the
	//    set [1,2], and the ADD action specified [3], then the final attribute
	//    value is [1,2,3]. An error occurs if an ADD action is specified for a
	//    set attribute and the attribute type specified does not match the existing
	//    set type.
	//
	// Both sets must have the same primitive data type. For example, if the existing
	//    data type is a set of strings, the Value must also be a set of strings.
	//
	// The ADD action only supports Number and set data types. In addition, ADD
	//    can only be used on top-level attributes, not nested attributes.
	//
	//    * DELETE - Deletes an element from a set.
	//
	// If a set of values is specified, then those values are subtracted from the
	//    old set. For example, if the attribute value was the set [a,b,c] and the
	//    DELETE action specifies [a,c], then the final attribute value is [b].
	//    Specifying an empty set is an error.
	//
	// The DELETE action only supports set data types. In addition, DELETE can only
	//    be used on top-level attributes, not nested attributes.
	//
	// You can have many actions in a single expression, such as the following:
	// SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
	//
	// For more information on update expressions, see Modifying Items and Attributes
	// (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Expressions.Modifying.html)
	// in the Amazon DynamoDB Developer Guide.
	UpdateExpression *string `type:"string"`
	// contains filtered or unexported fields
}

Represents the input of an UpdateItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateItemInput

func (UpdateItemInput) GoString added in v0.6.5

func (s UpdateItemInput) GoString() string

GoString returns the string representation

func (*UpdateItemInput) SetAttributeUpdates added in v1.5.0

func (s *UpdateItemInput) SetAttributeUpdates(v map[string]*AttributeValueUpdate) *UpdateItemInput

SetAttributeUpdates sets the AttributeUpdates field's value.

func (*UpdateItemInput) SetConditionExpression added in v1.5.0

func (s *UpdateItemInput) SetConditionExpression(v string) *UpdateItemInput

SetConditionExpression sets the ConditionExpression field's value.

func (*UpdateItemInput) SetConditionalOperator added in v1.5.0

func (s *UpdateItemInput) SetConditionalOperator(v string) *UpdateItemInput

SetConditionalOperator sets the ConditionalOperator field's value.

func (*UpdateItemInput) SetExpected added in v1.5.0

SetExpected sets the Expected field's value.

func (*UpdateItemInput) SetExpressionAttributeNames added in v1.5.0

func (s *UpdateItemInput) SetExpressionAttributeNames(v map[string]*string) *UpdateItemInput

SetExpressionAttributeNames sets the ExpressionAttributeNames field's value.

func (*UpdateItemInput) SetExpressionAttributeValues added in v1.5.0

func (s *UpdateItemInput) SetExpressionAttributeValues(v map[string]*AttributeValue) *UpdateItemInput

SetExpressionAttributeValues sets the ExpressionAttributeValues field's value.

func (*UpdateItemInput) SetKey added in v1.5.0

SetKey sets the Key field's value.

func (*UpdateItemInput) SetReturnConsumedCapacity added in v1.5.0

func (s *UpdateItemInput) SetReturnConsumedCapacity(v string) *UpdateItemInput

SetReturnConsumedCapacity sets the ReturnConsumedCapacity field's value.

func (*UpdateItemInput) SetReturnItemCollectionMetrics added in v1.5.0

func (s *UpdateItemInput) SetReturnItemCollectionMetrics(v string) *UpdateItemInput

SetReturnItemCollectionMetrics sets the ReturnItemCollectionMetrics field's value.

func (*UpdateItemInput) SetReturnValues added in v1.5.0

func (s *UpdateItemInput) SetReturnValues(v string) *UpdateItemInput

SetReturnValues sets the ReturnValues field's value.

func (*UpdateItemInput) SetTableName added in v1.5.0

func (s *UpdateItemInput) SetTableName(v string) *UpdateItemInput

SetTableName sets the TableName field's value.

func (*UpdateItemInput) SetUpdateExpression added in v1.5.0

func (s *UpdateItemInput) SetUpdateExpression(v string) *UpdateItemInput

SetUpdateExpression sets the UpdateExpression field's value.

func (UpdateItemInput) String added in v0.6.5

func (s UpdateItemInput) String() string

String returns the string representation

func (*UpdateItemInput) Validate added in v1.1.21

func (s *UpdateItemInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateItemOutput

type UpdateItemOutput struct {

	// A map of attribute values as they appear before or after the UpdateItem operation,
	// as determined by the ReturnValues parameter.
	//
	// The Attributes map is only present if ReturnValues was specified as something
	// other than NONE in the request. Each element represents one attribute.
	Attributes map[string]*AttributeValue `type:"map"`

	// The capacity units consumed by the UpdateItem operation. The data returned
	// includes the total provisioned throughput consumed, along with statistics
	// for the table and any indexes involved in the operation. ConsumedCapacity
	// is only returned if the ReturnConsumedCapacity parameter was specified. For
	// more information, see Provisioned Throughput (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ProvisionedThroughputIntro.html)
	// in the Amazon DynamoDB Developer Guide.
	ConsumedCapacity *ConsumedCapacity `type:"structure"`

	// Information about item collections, if any, that were affected by the UpdateItem
	// operation. ItemCollectionMetrics is only returned if the ReturnItemCollectionMetrics
	// parameter was specified. If the table does not have any local secondary indexes,
	// this information is not returned in the response.
	//
	// Each ItemCollectionMetrics element consists of:
	//
	//    * ItemCollectionKey - The partition key value of the item collection.
	//    This is the same as the partition key value of the item itself.
	//
	//    * SizeEstimateRangeGB - An estimate of item collection size, in gigabytes.
	//    This value is a two-element array containing a lower bound and an upper
	//    bound for the estimate. The estimate includes the size of all the items
	//    in the table, plus the size of all attributes projected into all of the
	//    local secondary indexes on that table. Use this estimate to measure whether
	//    a local secondary index is approaching its size limit.
	//
	// The estimate is subject to change over time; therefore, do not rely on the
	//    precision or accuracy of the estimate.
	ItemCollectionMetrics *ItemCollectionMetrics `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of an UpdateItem operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateItemOutput

func (UpdateItemOutput) GoString added in v0.6.5

func (s UpdateItemOutput) GoString() string

GoString returns the string representation

func (*UpdateItemOutput) SetAttributes added in v1.5.0

func (s *UpdateItemOutput) SetAttributes(v map[string]*AttributeValue) *UpdateItemOutput

SetAttributes sets the Attributes field's value.

func (*UpdateItemOutput) SetConsumedCapacity added in v1.5.0

func (s *UpdateItemOutput) SetConsumedCapacity(v *ConsumedCapacity) *UpdateItemOutput

SetConsumedCapacity sets the ConsumedCapacity field's value.

func (*UpdateItemOutput) SetItemCollectionMetrics added in v1.5.0

func (s *UpdateItemOutput) SetItemCollectionMetrics(v *ItemCollectionMetrics) *UpdateItemOutput

SetItemCollectionMetrics sets the ItemCollectionMetrics field's value.

func (UpdateItemOutput) String added in v0.6.5

func (s UpdateItemOutput) String() string

String returns the string representation

type UpdateTableInput

type UpdateTableInput struct {

	// An array of attributes that describe the key schema for the table and indexes.
	// If you are adding a new global secondary index to the table, AttributeDefinitions
	// must include the key element(s) of the new index.
	AttributeDefinitions []*AttributeDefinition `type:"list"`

	// An array of one or more global secondary indexes for the table. For each
	// index in the array, you can request one action:
	//
	//    * Create - add a new global secondary index to the table.
	//
	//    * Update - modify the provisioned throughput settings of an existing global
	//    secondary index.
	//
	//    * Delete - remove a global secondary index from the table.
	//
	// For more information, see Managing Global Secondary Indexes (http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GSI.OnlineOps.html)
	// in the Amazon DynamoDB Developer Guide.
	GlobalSecondaryIndexUpdates []*GlobalSecondaryIndexUpdate `type:"list"`

	// The new provisioned throughput settings for the specified table or index.
	ProvisionedThroughput *ProvisionedThroughput `type:"structure"`

	// Represents the DynamoDB Streams configuration for the table.
	//
	// You will receive a ResourceInUseException if you attempt to enable a stream
	// on a table that already has a stream, or if you attempt to disable a stream
	// on a table which does not have a stream.
	StreamSpecification *StreamSpecification `type:"structure"`

	// The name of the table to be updated.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of an UpdateTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTableInput

func (UpdateTableInput) GoString added in v0.6.5

func (s UpdateTableInput) GoString() string

GoString returns the string representation

func (*UpdateTableInput) SetAttributeDefinitions added in v1.5.0

func (s *UpdateTableInput) SetAttributeDefinitions(v []*AttributeDefinition) *UpdateTableInput

SetAttributeDefinitions sets the AttributeDefinitions field's value.

func (*UpdateTableInput) SetGlobalSecondaryIndexUpdates added in v1.5.0

func (s *UpdateTableInput) SetGlobalSecondaryIndexUpdates(v []*GlobalSecondaryIndexUpdate) *UpdateTableInput

SetGlobalSecondaryIndexUpdates sets the GlobalSecondaryIndexUpdates field's value.

func (*UpdateTableInput) SetProvisionedThroughput added in v1.5.0

func (s *UpdateTableInput) SetProvisionedThroughput(v *ProvisionedThroughput) *UpdateTableInput

SetProvisionedThroughput sets the ProvisionedThroughput field's value.

func (*UpdateTableInput) SetStreamSpecification added in v1.5.0

func (s *UpdateTableInput) SetStreamSpecification(v *StreamSpecification) *UpdateTableInput

SetStreamSpecification sets the StreamSpecification field's value.

func (*UpdateTableInput) SetTableName added in v1.5.0

func (s *UpdateTableInput) SetTableName(v string) *UpdateTableInput

SetTableName sets the TableName field's value.

func (UpdateTableInput) String added in v0.6.5

func (s UpdateTableInput) String() string

String returns the string representation

func (*UpdateTableInput) Validate added in v1.1.21

func (s *UpdateTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTableOutput

type UpdateTableOutput struct {

	// Represents the properties of the table.
	TableDescription *TableDescription `type:"structure"`
	// contains filtered or unexported fields
}

Represents the output of an UpdateTable operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTableOutput

func (UpdateTableOutput) GoString added in v0.6.5

func (s UpdateTableOutput) GoString() string

GoString returns the string representation

func (*UpdateTableOutput) SetTableDescription added in v1.5.0

func (s *UpdateTableOutput) SetTableDescription(v *TableDescription) *UpdateTableOutput

SetTableDescription sets the TableDescription field's value.

func (UpdateTableOutput) String added in v0.6.5

func (s UpdateTableOutput) String() string

String returns the string representation

type UpdateTimeToLiveInput added in v1.7.2

type UpdateTimeToLiveInput struct {

	// The name of the table to be configured.
	//
	// TableName is a required field
	TableName *string `min:"3" type:"string" required:"true"`

	// Represents the settings used to enable or disable Time to Live for the specified
	// table.
	//
	// TimeToLiveSpecification is a required field
	TimeToLiveSpecification *TimeToLiveSpecification `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Represents the input of an UpdateTimeToLive operation. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTimeToLiveInput

func (UpdateTimeToLiveInput) GoString added in v1.7.2

func (s UpdateTimeToLiveInput) GoString() string

GoString returns the string representation

func (*UpdateTimeToLiveInput) SetTableName added in v1.7.2

SetTableName sets the TableName field's value.

func (*UpdateTimeToLiveInput) SetTimeToLiveSpecification added in v1.7.2

func (s *UpdateTimeToLiveInput) SetTimeToLiveSpecification(v *TimeToLiveSpecification) *UpdateTimeToLiveInput

SetTimeToLiveSpecification sets the TimeToLiveSpecification field's value.

func (UpdateTimeToLiveInput) String added in v1.7.2

func (s UpdateTimeToLiveInput) String() string

String returns the string representation

func (*UpdateTimeToLiveInput) Validate added in v1.7.2

func (s *UpdateTimeToLiveInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTimeToLiveOutput added in v1.7.2

type UpdateTimeToLiveOutput struct {

	// Represents the output of an UpdateTimeToLive operation.
	TimeToLiveSpecification *TimeToLiveSpecification `type:"structure"`
	// contains filtered or unexported fields
}

See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTimeToLiveOutput

func (UpdateTimeToLiveOutput) GoString added in v1.7.2

func (s UpdateTimeToLiveOutput) GoString() string

GoString returns the string representation

func (*UpdateTimeToLiveOutput) SetTimeToLiveSpecification added in v1.7.2

func (s *UpdateTimeToLiveOutput) SetTimeToLiveSpecification(v *TimeToLiveSpecification) *UpdateTimeToLiveOutput

SetTimeToLiveSpecification sets the TimeToLiveSpecification field's value.

func (UpdateTimeToLiveOutput) String added in v1.7.2

func (s UpdateTimeToLiveOutput) String() string

String returns the string representation

type WriteRequest

type WriteRequest struct {

	// A request to perform a DeleteItem operation.
	DeleteRequest *DeleteRequest `type:"structure"`

	// A request to perform a PutItem operation.
	PutRequest *PutRequest `type:"structure"`
	// contains filtered or unexported fields
}

Represents an operation to perform - either DeleteItem or PutItem. You can only request one of these operations, not both, in a single WriteRequest. If you do need to perform both of these operations, you will need to provide two separate WriteRequest objects. See also, https://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/WriteRequest

func (WriteRequest) GoString added in v0.6.5

func (s WriteRequest) GoString() string

GoString returns the string representation

func (*WriteRequest) SetDeleteRequest added in v1.5.0

func (s *WriteRequest) SetDeleteRequest(v *DeleteRequest) *WriteRequest

SetDeleteRequest sets the DeleteRequest field's value.

func (*WriteRequest) SetPutRequest added in v1.5.0

func (s *WriteRequest) SetPutRequest(v *PutRequest) *WriteRequest

SetPutRequest sets the PutRequest field's value.

func (WriteRequest) String added in v0.6.5

func (s WriteRequest) String() string

String returns the string representation

Directories

Path Synopsis
Package dynamodbattribute provides marshaling and unmarshaling utilities to convert between Go types and dynamodb.AttributeValues.
Package dynamodbattribute provides marshaling and unmarshaling utilities to convert between Go types and dynamodb.AttributeValues.
Package dynamodbiface provides an interface to enable mocking the Amazon DynamoDB service client for testing your code.
Package dynamodbiface provides an interface to enable mocking the Amazon DynamoDB service client for testing your code.
Package expression provides types and functions to create Amazon DynamoDB Expression strings, ExpressionAttributeNames maps, and ExpressionAttributeValues maps.
Package expression provides types and functions to create Amazon DynamoDB Expression strings, ExpressionAttributeNames maps, and ExpressionAttributeValues maps.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL