aws

package
v1.6.0-alpha.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 30, 2017 License: Apache-2.0 Imports: 33 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// Provisioned IOPS SSD
	VolumeTypeIO1 = "io1"
	// General Purpose SSD
	VolumeTypeGP2 = "gp2"
	// Cold HDD (sc1)
	VolumeTypeSC1 = "sc1"
	// Throughput Optimized HDD
	VolumeTypeST1 = "st1"
)

AWS volume types

View Source 
const (
	MinTotalIOPS = 100
	MaxTotalIOPS = 20000
)

AWS provisioning limits. Source: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html

View Source 
const DefaultMaxEBSVolumes = 39

DefaultMaxEBSVolumes is the limit for volumes attached to an instance. Amazon recommends no more than 40; the system root volume uses at least one. See http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/volume_limits.html#linux-specific-volume-limits

View Source 
const DefaultVolumeType = "gp2"

DefaultVolumeType specifies which storage to use for newly created Volumes TODO: Remove when user/admin can configure volume types and thus we don't need hardcoded defaults.

View Source 
const MaxReadThenCreateRetries = 30

MaxReadThenCreateRetries sets the maximum number of attempts we will make when we read to see if something exists and then try to create it if we didn't find it. This can fail once in a consistent system if done in parallel In an eventually consistent system, it could fail unboundedly

View Source 
const ProviderName = "aws"

ProviderName is the name of this cloud provider.

View Source 
const ProxyProtocolPolicyName = "k8s-proxyprotocol-enabled"
View Source 
const ServiceAnnotationLoadBalancerAccessLogEmitInterval = "service.beta.kubernetes.io/aws-load-balancer-access-log-emit-interval"

ServiceAnnotationLoadBalancerAccessLogEmitInterval is the annotation used to specify access log emit interval.

View Source 
const ServiceAnnotationLoadBalancerAccessLogEnabled = "service.beta.kubernetes.io/aws-load-balancer-access-log-enabled"

ServiceAnnotationLoadBalancerAccessLogEnabled is the annotation used on the service to enable or disable access logs.

View Source 
const ServiceAnnotationLoadBalancerAccessLogS3BucketName = "service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name"

ServiceAnnotationLoadBalancerAccessLogS3BucketName is the annotation used to specify access log s3 bucket name.

View Source 
const ServiceAnnotationLoadBalancerAccessLogS3BucketPrefix = "service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix"

ServiceAnnotationLoadBalancerAccessLogS3BucketPrefix is the annotation used to specify access log s3 bucket prefix.

View Source 
const ServiceAnnotationLoadBalancerBEProtocol = "service.beta.kubernetes.io/aws-load-balancer-backend-protocol"

ServiceAnnotationLoadBalancerBEProtocol is the annotation used on the service to specify the protocol spoken by the backend (pod) behind a listener. If `http` (default) or `https`, an HTTPS listener that terminates the 

connection and parses headers is created.

If set to `ssl` or `tcp`, a "raw" SSL listener is used. If set to `http` and `aws-load-balancer-ssl-cert` is not used then a HTTP listener is used.

View Source 
const ServiceAnnotationLoadBalancerCertificate = "service.beta.kubernetes.io/aws-load-balancer-ssl-cert"

ServiceAnnotationLoadBalancerCertificate is the annotation used on the service to request a secure listener. Value is a valid certificate ARN. For more, see http://docs.aws.amazon.com/ElasticLoadBalancing/latest/DeveloperGuide/elb-listener-config.html CertARN is an IAM or CM certificate ARN, e.g. arn:aws:acm:us-east-1:123456789012:certificate/12345678-1234-1234-1234-123456789012

View Source 
const ServiceAnnotationLoadBalancerConnectionDrainingEnabled = "service.beta.kubernetes.io/aws-load-balancer-connection-draining-enabled"

ServiceAnnotationLoadBalancerConnectionDrainingEnabled is the annnotation used on the service to enable or disable connection draining.

View Source 
const ServiceAnnotationLoadBalancerConnectionDrainingTimeout = "service.beta.kubernetes.io/aws-load-balancer-connection-draining-timeout"

ServiceAnnotationLoadBalancerConnectionDrainingTimeout is the annotation used on the service to specify a connection draining timeout.

View Source 
const ServiceAnnotationLoadBalancerConnectionIdleTimeout = "service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout"

ServiceAnnotationLoadBalancerConnectionIdleTimeout is the annotation used on the service to specify the idle connection timeout.

View Source 
const ServiceAnnotationLoadBalancerCrossZoneLoadBalancingEnabled = "service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled"

ServiceAnnotationLoadBalancerCrossZoneLoadBalancingEnabled is the annotation used on the service to enable or disable cross-zone load balancing.

View Source 
const ServiceAnnotationLoadBalancerInternal = "service.beta.kubernetes.io/aws-load-balancer-internal"

ServiceAnnotationLoadBalancerInternal is the annotation used on the service to indicate that we want an internal ELB. Currently we accept only the value "0.0.0.0/0" - other values are an error. This lets us define more advanced semantics in future.

View Source 
const ServiceAnnotationLoadBalancerProxyProtocol = "service.beta.kubernetes.io/aws-load-balancer-proxy-protocol"

ServiceAnnotationLoadBalancerProxyProtocol is the annotation used on the service to enable the proxy protocol on an ELB. Right now we only accept the value "*" which means enable the proxy protocol on all ELB backends. In the future we could adjust this to allow setting the proxy protocol only on certain backends.

View Source 
const ServiceAnnotationLoadBalancerSSLPorts = "service.beta.kubernetes.io/aws-load-balancer-ssl-ports"

ServiceAnnotationLoadBalancerSSLPorts is the annotation used on the service to specify a comma-separated list of ports that will use SSL/HTTPS listeners. Defaults to '*' (all).

View Source 
const TagNameKubernetesCluster = "KubernetesCluster"

TagNameKubernetesCluster is the tag name we use to differentiate multiple logically independent clusters running in the same AZ

View Source 
const TagNameKubernetesService = "kubernetes.io/service-name"

TagNameKubernetesService is the tag name we use to differentiate multiple services. Used currently for ELBs only.

View Source 
const TagNameSubnetInternalELB = "kubernetes.io/role/internal-elb"

TagNameSubnetInternalELB is the tag name used on a subnet to designate that it should be used for internal ELBs

View Source 
const TagNameSubnetPublicELB = "kubernetes.io/role/elb"

TagNameSubnetPublicELB is the tag name used on a subnet to designate that it should be used for internet ELBs

Variables

View Source 
var WellKnownRegions = [...]string{

	"ap-northeast-1",
	"ap-northeast-2",
	"ap-south-1",
	"ap-southeast-1",
	"ap-southeast-2",
	"ca-central-1",
	"eu-central-1",
	"eu-west-1",
	"eu-west-2",
	"sa-east-1",
	"us-east-1",
	"us-east-2",
	"us-west-1",
	"us-west-2",

	"cn-north-1",
	"us-gov-west-1",
}

WellKnownRegions is the complete list of regions known to the AWS cloudprovider and credentialprovider.

Functions

func RecognizeRegion 

func RecognizeRegion(region string)

RecognizeRegion is called for each AWS region we know about. It currently registers a credential provider for that region. There are two paths to discovering a region:

  • we hard-code some well-known regions
  • if a region is discovered from instance metadata, we add that

func RecognizeWellKnownRegions 

func RecognizeWellKnownRegions()

RecognizeWellKnownRegions calls RecognizeRegion on each WellKnownRegion

func ResizeInstanceGroup added in v1.2.0 

func ResizeInstanceGroup(asg ASG, instanceGroupName string, size int) error

ResizeInstanceGroup sets the size of the specificed instancegroup Exported so it can be used by the e2e tests, which don't want to instantiate a full cloudprovider.

Types

type ASG 

type ASG interface {
	UpdateAutoScalingGroup(*autoscaling.UpdateAutoScalingGroupInput) (*autoscaling.UpdateAutoScalingGroupOutput, error)
	DescribeAutoScalingGroups(*autoscaling.DescribeAutoScalingGroupsInput) (*autoscaling.DescribeAutoScalingGroupsOutput, error)
}

ASG is a simple pass-through of the Autoscaling client interface, which allows for testing.

type Backoff added in v1.2.0 

type Backoff struct {
	// contains filtered or unexported fields
}

Backoff manages a backoff that varies based on the recently observed failures

func (*Backoff) ComputeDelayForRequest added in v1.2.0 

func (b *Backoff) ComputeDelayForRequest(now time.Time) time.Duration

Computes the delay required for a request, also updating internal state to count this request

func (*Backoff) ReportError added in v1.2.0 

func (b *Backoff) ReportError()

Called when we observe a throttling error

type Cloud added in v1.3.4 

type Cloud struct {
	// contains filtered or unexported fields
}

Cloud is an implementation of Interface, LoadBalancer and Instances for Amazon Web Services.

func (*Cloud) AddSSHKeyToAllInstances added in v1.3.4 

func (c *Cloud) AddSSHKeyToAllInstances(user string, keyData []byte) error

AddSSHKeyToAllInstances is currently not implemented.

func (*Cloud) AttachDisk added in v1.3.4 

func (c *Cloud) AttachDisk(diskName KubernetesVolumeID, nodeName types.NodeName, readOnly bool) (string, error)

AttachDisk implements Volumes.AttachDisk

func (*Cloud) Clusters added in v1.3.4 

func (c *Cloud) Clusters() (cloudprovider.Clusters, bool)

Clusters returns the list of clusters.

func (*Cloud) CreateDisk added in v1.3.4 

func (c *Cloud) CreateDisk(volumeOptions *VolumeOptions) (KubernetesVolumeID, error)

CreateDisk implements Volumes.CreateDisk

func (*Cloud) CreateRoute added in v1.3.4 

func (c *Cloud) CreateRoute(clusterName string, nameHint string, route *cloudprovider.Route) error

CreateRoute implements Routes.CreateRoute Create the described route

func (*Cloud) CurrentNodeName added in v1.3.4 

func (c *Cloud) CurrentNodeName(hostname string) (types.NodeName, error)

CurrentNodeName returns the name of the current node

func (*Cloud) DeleteDisk added in v1.3.4 

func (c *Cloud) DeleteDisk(volumeName KubernetesVolumeID) (bool, error)

DeleteDisk implements Volumes.DeleteDisk

func (*Cloud) DeleteRoute added in v1.3.4 

func (c *Cloud) DeleteRoute(clusterName string, route *cloudprovider.Route) error

DeleteRoute implements Routes.DeleteRoute Delete the specified route

func (*Cloud) DescribeInstanceGroup added in v1.3.4 

func (c *Cloud) DescribeInstanceGroup(instanceGroupName string) (InstanceGroupInfo, error)

Implement InstanceGroups.DescribeInstanceGroup Queries the cloud provider for information about the specified instance group

func (*Cloud) DetachDisk added in v1.3.4 

func (c *Cloud) DetachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)

DetachDisk implements Volumes.DetachDisk

func (*Cloud) DiskIsAttached added in v1.3.4 

func (c *Cloud) DiskIsAttached(diskName KubernetesVolumeID, nodeName types.NodeName) (bool, error)

DiskIsAttached implements Volumes.DiskIsAttached

func (*Cloud) DisksAreAttached added in v1.4.6 

func (c *Cloud) DisksAreAttached(diskNames []KubernetesVolumeID, nodeName types.NodeName) (map[KubernetesVolumeID]bool, error)

func (*Cloud) EnsureLoadBalancer added in v1.3.4 

func (c *Cloud) EnsureLoadBalancer(clusterName string, apiService *v1.Service, nodes []*v1.Node) (*v1.LoadBalancerStatus, error)

EnsureLoadBalancer implements LoadBalancer.EnsureLoadBalancer

func (*Cloud) EnsureLoadBalancerDeleted added in v1.3.4 

func (c *Cloud) EnsureLoadBalancerDeleted(clusterName string, service *v1.Service) error

EnsureLoadBalancerDeleted implements LoadBalancer.EnsureLoadBalancerDeleted.

func (*Cloud) ExternalID added in v1.3.4 

func (c *Cloud) ExternalID(nodeName types.NodeName) (string, error)

ExternalID returns the cloud provider ID of the node with the specified nodeName (deprecated).

func (*Cloud) GetDiskPath added in v1.3.4 

func (c *Cloud) GetDiskPath(volumeName KubernetesVolumeID) (string, error)

GetDiskPath implements Volumes.GetDiskPath

func (*Cloud) GetLoadBalancer added in v1.3.4 

func (c *Cloud) GetLoadBalancer(clusterName string, service *v1.Service) (*v1.LoadBalancerStatus, bool, error)

GetLoadBalancer is an implementation of LoadBalancer.GetLoadBalancer

func (*Cloud) GetVolumeLabels added in v1.3.4 

func (c *Cloud) GetVolumeLabels(volumeName KubernetesVolumeID) (map[string]string, error)

GetVolumeLabels implements Volumes.GetVolumeLabels

func (*Cloud) GetZone added in v1.3.4 

func (c *Cloud) GetZone() (cloudprovider.Zone, error)

GetZone implements Zones.GetZone

func (*Cloud) InstanceID added in v1.3.4 

func (c *Cloud) InstanceID(nodeName types.NodeName) (string, error)

InstanceID returns the cloud provider ID of the node with the specified nodeName.

func (*Cloud) InstanceType added in v1.3.4 

func (c *Cloud) InstanceType(nodeName types.NodeName) (string, error)

InstanceType returns the type of the node with the specified nodeName.

func (*Cloud) Instances added in v1.3.4 

func (c *Cloud) Instances() (cloudprovider.Instances, bool)

Instances returns an implementation of Instances for Amazon Web Services.

func (*Cloud) ListRoutes added in v1.3.4 

func (c *Cloud) ListRoutes(clusterName string) ([]*cloudprovider.Route, error)

ListRoutes implements Routes.ListRoutes List all routes that match the filter

func (*Cloud) LoadBalancer added in v1.3.4 

func (c *Cloud) LoadBalancer() (cloudprovider.LoadBalancer, bool)

LoadBalancer returns an implementation of LoadBalancer for Amazon Web Services.

func (*Cloud) NodeAddresses added in v1.3.4 

func (c *Cloud) NodeAddresses(name types.NodeName) ([]v1.NodeAddress, error)

NodeAddresses is an implementation of Instances.NodeAddresses.

func (*Cloud) ProviderName added in v1.3.4 

func (c *Cloud) ProviderName() string

ProviderName returns the cloud provider ID.

func (*Cloud) ResizeInstanceGroup added in v1.3.4 

func (c *Cloud) ResizeInstanceGroup(instanceGroupName string, size int) error

Implement InstanceGroups.ResizeInstanceGroup Set the size to the fixed size

func (*Cloud) Routes added in v1.3.4 

func (c *Cloud) Routes() (cloudprovider.Routes, bool)

Routes returns an implementation of Routes for Amazon Web Services.

func (*Cloud) ScrubDNS added in v1.3.4 

func (c *Cloud) ScrubDNS(nameservers, searches []string) (nsOut, srchOut []string)

ScrubDNS filters DNS settings for pods.

func (*Cloud) UpdateLoadBalancer added in v1.3.4 

func (c *Cloud) UpdateLoadBalancer(clusterName string, service *v1.Service, nodes []*v1.Node) error

UpdateLoadBalancer implements LoadBalancer.UpdateLoadBalancer

func (*Cloud) Zones added in v1.3.4 

func (c *Cloud) Zones() (cloudprovider.Zones, bool)

Zones returns an implementation of Zones for Amazon Web Services.

type CloudConfig added in v1.3.4 

type CloudConfig struct {
	Global struct {
		// TODO: Is there any use for this?  We can get it from the instance metadata service
		// Maybe if we're not running on AWS, e.g. bootstrap; for now it is not very useful
		Zone string

		KubernetesClusterTag string

		//The aws provider creates an inbound rule per load balancer on the node security
		//group. However, this can run into the AWS security group rule limit of 50 if
		//many LoadBalancers are created.
		//
		//This flag disables the automatic ingress creation. It requires that the user
		//has setup a rule that allows inbound traffic on kubelet ports from the
		//local VPC subnet (so load balancers can access it). E.g. 10.82.0.0/16 30000-32000.
		DisableSecurityGroupIngress bool

		//During the instantiation of an new AWS cloud provider, the detected region
		//is validated against a known set of regions.
		//
		//In a non-standard, AWS like environment (e.g. Eucalyptus), this check may
		//be undesirable.  Setting this to true will disable the check and provide
		//a warning that the check was skipped.  Please note that this is an
		//experimental feature and work-in-progress for the moment.  If you find
		//yourself in an non-AWS cloud and open an issue, please indicate that in the
		//issue body.
		DisableStrictZoneCheck bool
	}
}

CloudConfig wraps the settings for the AWS cloud provider.

type CrossRequestRetryDelay added in v1.2.0 

type CrossRequestRetryDelay struct {
	// contains filtered or unexported fields
}

CrossRequestRetryDelay inserts delays before AWS calls, when we are observing RequestLimitExceeded errors Note that we share a CrossRequestRetryDelay across multiple AWS requests; this is a process-wide back-off, whereas the aws-sdk-go implements a per-request exponential backoff/retry

func NewCrossRequestRetryDelay added in v1.2.0 

func NewCrossRequestRetryDelay() *CrossRequestRetryDelay

Create a new CrossRequestRetryDelay

func (*CrossRequestRetryDelay) AfterRetry added in v1.2.0 

func (c *CrossRequestRetryDelay) AfterRetry(r *request.Request)

Added to the AfterRetry chain; called after any error

func (*CrossRequestRetryDelay) BeforeSign added in v1.2.0 

func (c *CrossRequestRetryDelay) BeforeSign(r *request.Request)

Added to the Sign chain; called before each request

type DeviceAllocator added in v1.4.9 

type DeviceAllocator interface {
	// GetNext returns a free device name or error when there is no free device
	// name. Only the device suffix is returned, e.g. "ba" for "/dev/xvdba".
	// It's up to the called to add appropriate "/dev/sd" or "/dev/xvd" prefix.
	GetNext(existingDevices ExistingDevices) (mountDevice, error)
}

On AWS, we should assign new (not yet used) device names to attached volumes. If we reuse a previously used name, we may get the volume "attaching" forever, see https://aws.amazon.com/premiumsupport/knowledge-center/ebs-stuck-attaching/. DeviceAllocator finds available device name, taking into account already assigned device names from ExistingDevices map. It tries to find the next device name to the previously assigned one (from previous DeviceAllocator call), so all available device names are used eventually and it minimizes device name reuse. All these allocations are in-memory, nothing is written to / read from /dev directory.

func NewDeviceAllocator added in v1.4.9 

func NewDeviceAllocator(length int, firstDevice mountDevice) DeviceAllocator

NewDeviceAllocator creates new DeviceAlllocator that allocates device names of given length ("aaa" for length 3) and with given first device, so all devices before the first device are left to the operating system. With length 2 and firstDevice "ba", it will allocate device names ba, bb, ..., bz, ca, ... cz, ..., da, ... zz, so a..z and aa..az can be used by the operating system.

type EC2 

type EC2 interface {
	// Query EC2 for instances matching the filter
	DescribeInstances(request *ec2.DescribeInstancesInput) ([]*ec2.Instance, error)

	// Attach a volume to an instance
	AttachVolume(*ec2.AttachVolumeInput) (*ec2.VolumeAttachment, error)
	// Detach a volume from an instance it is attached to
	DetachVolume(request *ec2.DetachVolumeInput) (resp *ec2.VolumeAttachment, err error)
	// Lists volumes
	DescribeVolumes(request *ec2.DescribeVolumesInput) ([]*ec2.Volume, error)
	// Create an EBS volume
	CreateVolume(request *ec2.CreateVolumeInput) (resp *ec2.Volume, err error)
	// Delete an EBS volume
	DeleteVolume(*ec2.DeleteVolumeInput) (*ec2.DeleteVolumeOutput, error)

	DescribeSecurityGroups(request *ec2.DescribeSecurityGroupsInput) ([]*ec2.SecurityGroup, error)

	CreateSecurityGroup(*ec2.CreateSecurityGroupInput) (*ec2.CreateSecurityGroupOutput, error)
	DeleteSecurityGroup(request *ec2.DeleteSecurityGroupInput) (*ec2.DeleteSecurityGroupOutput, error)

	AuthorizeSecurityGroupIngress(*ec2.AuthorizeSecurityGroupIngressInput) (*ec2.AuthorizeSecurityGroupIngressOutput, error)
	RevokeSecurityGroupIngress(*ec2.RevokeSecurityGroupIngressInput) (*ec2.RevokeSecurityGroupIngressOutput, error)

	DescribeSubnets(*ec2.DescribeSubnetsInput) ([]*ec2.Subnet, error)

	CreateTags(*ec2.CreateTagsInput) (*ec2.CreateTagsOutput, error)

	DescribeRouteTables(request *ec2.DescribeRouteTablesInput) ([]*ec2.RouteTable, error)
	CreateRoute(request *ec2.CreateRouteInput) (*ec2.CreateRouteOutput, error)
	DeleteRoute(request *ec2.DeleteRouteInput) (*ec2.DeleteRouteOutput, error)

	ModifyInstanceAttribute(request *ec2.ModifyInstanceAttributeInput) (*ec2.ModifyInstanceAttributeOutput, error)
}

EC2 is an abstraction over AWS', to allow mocking/other implementations Note that the DescribeX functions return a list, so callers don't need to deal with paging TODO: Should we rename this to AWS (EBS & ELB are not technically part of EC2)

type EC2Metadata added in v1.1.1 

type EC2Metadata interface {
	// Query the EC2 metadata service (used to discover instance-id etc)
	GetMetadata(path string) (string, error)
}

EC2Metadata is an abstraction over the AWS metadata service.

type ELB 

type ELB interface {
	CreateLoadBalancer(*elb.CreateLoadBalancerInput) (*elb.CreateLoadBalancerOutput, error)
	DeleteLoadBalancer(*elb.DeleteLoadBalancerInput) (*elb.DeleteLoadBalancerOutput, error)
	DescribeLoadBalancers(*elb.DescribeLoadBalancersInput) (*elb.DescribeLoadBalancersOutput, error)
	RegisterInstancesWithLoadBalancer(*elb.RegisterInstancesWithLoadBalancerInput) (*elb.RegisterInstancesWithLoadBalancerOutput, error)
	DeregisterInstancesFromLoadBalancer(*elb.DeregisterInstancesFromLoadBalancerInput) (*elb.DeregisterInstancesFromLoadBalancerOutput, error)
	CreateLoadBalancerPolicy(*elb.CreateLoadBalancerPolicyInput) (*elb.CreateLoadBalancerPolicyOutput, error)
	SetLoadBalancerPoliciesForBackendServer(*elb.SetLoadBalancerPoliciesForBackendServerInput) (*elb.SetLoadBalancerPoliciesForBackendServerOutput, error)

	DetachLoadBalancerFromSubnets(*elb.DetachLoadBalancerFromSubnetsInput) (*elb.DetachLoadBalancerFromSubnetsOutput, error)
	AttachLoadBalancerToSubnets(*elb.AttachLoadBalancerToSubnetsInput) (*elb.AttachLoadBalancerToSubnetsOutput, error)

	CreateLoadBalancerListeners(*elb.CreateLoadBalancerListenersInput) (*elb.CreateLoadBalancerListenersOutput, error)
	DeleteLoadBalancerListeners(*elb.DeleteLoadBalancerListenersInput) (*elb.DeleteLoadBalancerListenersOutput, error)

	ApplySecurityGroupsToLoadBalancer(*elb.ApplySecurityGroupsToLoadBalancerInput) (*elb.ApplySecurityGroupsToLoadBalancerOutput, error)

	ConfigureHealthCheck(*elb.ConfigureHealthCheckInput) (*elb.ConfigureHealthCheckOutput, error)

	DescribeLoadBalancerAttributes(*elb.DescribeLoadBalancerAttributesInput) (*elb.DescribeLoadBalancerAttributesOutput, error)
	ModifyLoadBalancerAttributes(*elb.ModifyLoadBalancerAttributesInput) (*elb.ModifyLoadBalancerAttributesOutput, error)
}

ELB is a simple pass-through of AWS' ELB client interface, which allows for testing

type ExistingDevices added in v1.4.9 

type ExistingDevices map[mountDevice]awsVolumeID

ExistingDevices is a map of assigned devices. Presence of a key with a device name in the map means that the device is allocated. Value is irrelevant and can be used for anything that DeviceAllocator user wants. Only the relevant part of device name should be in the map, e.g. "ba" for "/dev/xvdba".

type IPPermissionSet added in v1.2.0 

type IPPermissionSet map[string]*ec2.IpPermission

func NewIPPermissionSet added in v1.2.0 

func NewIPPermissionSet(items ...*ec2.IpPermission) IPPermissionSet

func (IPPermissionSet) Difference added in v1.2.0 

func (s IPPermissionSet) Difference(s2 IPPermissionSet) IPPermissionSet

Difference returns a set of objects that are not in s2 For example: s1 = {a1, a2, a3} s2 = {a1, a2, a4, a5} s1.Difference(s2) = {a3} s2.Difference(s1) = {a4, a5}

func (IPPermissionSet) Equal added in v1.2.0 

func (s1 IPPermissionSet) Equal(s2 IPPermissionSet) bool

Equal returns true if and only if s1 is equal (as a set) to s2. Two sets are equal if their membership is identical. (In practice, this means same elements, order doesn't matter)

func (IPPermissionSet) Insert added in v1.2.0 

func (s IPPermissionSet) Insert(items ...*ec2.IpPermission)

Insert adds items to the set.

func (IPPermissionSet) IsSuperset added in v1.2.0 

func (s1 IPPermissionSet) IsSuperset(s2 IPPermissionSet) bool

IsSuperset returns true if and only if s1 is a superset of s2.

func (IPPermissionSet) Len added in v1.2.0 

func (s IPPermissionSet) Len() int

Len returns the size of the set.

func (IPPermissionSet) List added in v1.2.0 

func (s IPPermissionSet) List() []*ec2.IpPermission

List returns the contents as a slice. Order is not defined.

func (IPPermissionSet) Ungroup added in v1.2.0 

func (s IPPermissionSet) Ungroup() IPPermissionSet

Ungroup splits permissions out into individual permissions EC2 will combine permissions with the same port but different SourceRanges together, for example We ungroup them so we can process them

type InstanceGroupInfo 

type InstanceGroupInfo interface {
	// The number of instances currently running under control of this group
	CurrentSize() (int, error)
}

InstanceGroupInfo is returned by InstanceGroups.Describe, and exposes information about the group.

func DescribeInstanceGroup added in v1.2.0 

func DescribeInstanceGroup(asg ASG, instanceGroupName string) (InstanceGroupInfo, error)

DescribeInstanceGroup gets info about the specified instancegroup Exported so it can be used by the e2e tests, which don't want to instantiate a full cloudprovider.

type InstanceGroups 

type InstanceGroups interface {
	// Set the size to the fixed size
	ResizeInstanceGroup(instanceGroupName string, size int) error
	// Queries the cloud provider for information about the specified instance group
	DescribeInstanceGroup(instanceGroupName string) (InstanceGroupInfo, error)
}

InstanceGroups is an interface for managing cloud-managed instance groups / autoscaling instance groups TODO: Allow other clouds to implement this

type KubernetesVolumeID added in v1.4.6 

type KubernetesVolumeID string

KubernetesVolumeID represents the id for a volume in the kubernetes API; a few forms are recognized:

  • aws://<zone>/<awsVolumeId>
  • aws:///<awsVolumeId>
  • <awsVolumeId>

type Services added in v1.3.4 

type Services interface {
	Compute(region string) (EC2, error)
	LoadBalancing(region string) (ELB, error)
	Autoscaling(region string) (ASG, error)
	Metadata() (EC2Metadata, error)
}

Services is an abstraction over AWS, to allow mocking/other implementations

type VolumeOptions 

type VolumeOptions struct {
	CapacityGB       int
	Tags             map[string]string
	PVCName          string
	VolumeType       string
	AvailabilityZone string
	// IOPSPerGB x CapacityGB will give total IOPS of the volume to create.
	// Calculated total IOPS will be capped at MaxTotalIOPS.
	IOPSPerGB int
	Encrypted bool
	// fully qualified resource name to the key to use for encryption.
	// example: arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef
	KmsKeyId string
}

VolumeOptions specifies capacity and tags for a volume.

type Volumes 

type Volumes interface {
	// Attach the disk to the node with the specified NodeName
	// nodeName can be empty to mean "the instance on which we are running"
	// Returns the device (e.g. /dev/xvdf) where we attached the volume
	AttachDisk(diskName KubernetesVolumeID, nodeName types.NodeName, readOnly bool) (string, error)
	// Detach the disk from the node with the specified NodeName
	// nodeName can be empty to mean "the instance on which we are running"
	// Returns the device where the volume was attached
	DetachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)

	// Create a volume with the specified options
	CreateDisk(volumeOptions *VolumeOptions) (volumeName KubernetesVolumeID, err error)
	// Delete the specified volume
	// Returns true iff the volume was deleted
	// If the was not found, returns (false, nil)
	DeleteDisk(volumeName KubernetesVolumeID) (bool, error)

	// Get labels to apply to volume on creation
	GetVolumeLabels(volumeName KubernetesVolumeID) (map[string]string, error)

	// Get volume's disk path from volume name
	// return the device path where the volume is attached
	GetDiskPath(volumeName KubernetesVolumeID) (string, error)

	// Check if the volume is already attached to the node with the specified NodeName
	DiskIsAttached(diskName KubernetesVolumeID, nodeName types.NodeName) (bool, error)

	// Check if a list of volumes are attached to the node with the specified NodeName
	DisksAreAttached(diskNames []KubernetesVolumeID, nodeName types.NodeName) (map[KubernetesVolumeID]bool, error)
}

Volumes is an interface for managing cloud-provisioned volumes TODO: Allow other clouds to implement this

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.