agent

package
v0.9.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 8, 2017 License: MPL-2.0 Imports: 71 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// MinInterval is the minimal interval between
	// two checks. Do not allow for a interval below this value.
	// Otherwise we risk fork bombing a system.
	MinInterval = time.Second

	// CheckBufSize is the maximum size of the captured
	// check output. Prevents an enormous buffer
	// from being captured
	CheckBufSize = 4 * 1024 // 4KB

	// UserAgent is the value of the User-Agent header
	// for HTTP health checks.
	UserAgent = "Consul Health Check"
)
View Source 
const (
	// SegmentLimit is the maximum number of network segments that may be declared.
	SegmentLimit = 64

	// SegmentNameLimit is the maximum segment name length.
	SegmentNameLimit = 64
)
View Source 
const (
	SerfLANKeyring = "serf/local.keyring"
	SerfWANKeyring = "serf/remote.keyring"
)
View Source 
const DefaultDockerHost = "unix:///var/run/docker.sock"
View Source 
const (
	// Limit the size of a watch handlers's output to the
	// last WatchBufSize. Prevents an enormous buffer
	// from being captured
	WatchBufSize = 4 * 1024 // 4KB
)

Variables

View Source 
var InvalidDnsRe = regexp.MustCompile(`[^A-Za-z0-9\\-]+`)
View Source 
var TempDir = os.TempDir()

TempDir defines the base dir for temporary directories.

Functions

func ACLDisabled 

func ACLDisabled(resp http.ResponseWriter, req *http.Request) (interface{}, error)

ACLDisabled handles if ACL datacenter is not configured

func Asset 

func Asset(name string) ([]byte, error)

Asset loads and returns the asset for the given name. It returns an error if the asset could not be found or could not be loaded.

func AssetDir 

func AssetDir(name string) ([]string, error)

AssetDir returns the file names below a certain directory embedded in the file by go-bindata. For example if you run go-bindata on data/... and data contains the following hierarchy: 

data/
  foo.txt
  img/
    a.png
    b.png

then AssetDir("data") would return []string{"foo.txt", "img"} AssetDir("data/img") would return []string{"a.png", "b.png"} AssetDir("foo.txt") and AssetDir("notexist") would return an error AssetDir("") will return []string{"data"}.

func AssetInfo 

func AssetInfo(name string) (os.FileInfo, error)

AssetInfo loads and returns the asset info for the given name. It returns an error if the asset could not be found or could not be loaded.

func AssetNames 

func AssetNames() []string

AssetNames returns the names of the assets.

func Bool 

func Bool(b bool) *bool

Bool is used to initialize bool pointers in struct literals.

func DecodeCheckDefinition 

func DecodeCheckDefinition(raw interface{}) (*structs.CheckDefinition, error)

DecodeCheckDefinition is used to decode a check definition

func DecodeServiceDefinition 

func DecodeServiceDefinition(raw interface{}) (*structs.ServiceDefinition, error)

DecodeServiceDefinition is used to decode a service definition

func Duration 

func Duration(d time.Duration) *time.Duration

Duration is used to initialize time.Duration pointers in struct literals.

func ExecScript 

func ExecScript(script string) (*exec.Cmd, error)

ExecScript returns a command to execute a script

func FixupCheckType 

func FixupCheckType(raw interface{}) error

func FixupConfigDurations 

func FixupConfigDurations(raw interface{}) error

FixupConfigDurations is used to handle parsing the duration fields in the Autopilot config struct

func FixupLockDelay 

func FixupLockDelay(raw interface{}) error

FixupLockDelay is used to handle parsing the JSON body to session/create and properly parsing out the lock delay duration value.

func MustAsset 

func MustAsset(name string) []byte

MustAsset is like Asset but panics when Asset would return an error. It simplifies safe initialization of global variables.

func NewLocalState added in v0.9.0 

func NewLocalState(c *Config, lg *log.Logger, tokens *token.Store) *localState

NewLocalState creates a is used to initialize the local state

func ParseHost added in v0.9.0 

func ParseHost(host string) (string, string, string, error)

ParseHost verifies that the given host strings is valid. copied from github.com/docker/docker/client.go

func ParseMetaPair 

func ParseMetaPair(raw string) (string, string)

ParseMetaPair parses a key/value pair of the form key:value

func ParseRelayFactor 

func ParseRelayFactor(n int) (uint8, error)

ParseRelayFactor validates and converts the given relay factor to uint8

func RestoreAsset 

func RestoreAsset(dir, name string) error

RestoreAsset restores an asset under the given directory

func RestoreAssets 

func RestoreAssets(dir, name string) error

RestoreAssets restores an asset under the given directory recursively

func TenPorts 

func TenPorts() int

TenPorts returns the first port number of a block of ten random ports.

func Uint64 

func Uint64(i uint64) *uint64

Uint64 is used to initialize uint64 pointers in struct literals.

func UniqueID 

func UniqueID() string

func ValidateSegments added in v0.9.3 

func ValidateSegments(conf *Config) error

Types

type AddressConfig 

type AddressConfig struct {
	DNS   string // DNS Query interface
	HTTP  string // HTTP API
	HTTPS string // HTTPS API

	// RPC is deprecated and is no longer used. It will be removed in a future
	// version.
	RPC string // CLI RPC
}

AddressConfig is used to provide address overrides for specific services. By default, either ClientAddress or ServerAddress is used.

type AdvertiseAddrsConfig 

type AdvertiseAddrsConfig struct {
	SerfLan    *net.TCPAddr `mapstructure:"-"`
	SerfLanRaw string       `mapstructure:"serf_lan"`
	SerfWan    *net.TCPAddr `mapstructure:"-"`
	SerfWanRaw string       `mapstructure:"serf_wan"`
	RPC        *net.TCPAddr `mapstructure:"-"`
	RPCRaw     string       `mapstructure:"rpc"`
}

type Agent 

type Agent struct {

	// Output sink for logs
	LogOutput io.Writer

	// Used for streaming logs to
	LogWriter *logger.LogWriter

	// In-memory sink used for collecting metrics
	MemSink *metrics.InmemSink
	// contains filtered or unexported fields
}

The agent is the long running process that is run on every machine. It exposes an RPC interface that is used by the CLI to control the agent. The agent runs the query interfaces like HTTP, DNS, and RPC. However, it can run in either a client, or server mode. In server mode, it runs a full Consul server. In client-only mode, it only forwards requests to other Consul servers.

func New 

func New(c *Config) (*Agent, error)

func (*Agent) AddCheck 

func (a *Agent) AddCheck(check *structs.HealthCheck, chkType *structs.CheckType, persist bool, token string) error

AddCheck is used to add a health check to the agent. This entry is persistent and the agent will make a best effort to ensure it is registered. The Check may include a CheckType which is used to automatically update the check status

func (*Agent) AddService 

func (a *Agent) AddService(service *structs.NodeService, chkTypes []*structs.CheckType, persist bool, token string) error

AddService is used to add a service entry. This entry is persistent and the agent will make a best effort to ensure it is registered

func (*Agent) DisableNodeMaintenance 

func (a *Agent) DisableNodeMaintenance()

DisableNodeMaintenance removes a node from maintenance mode

func (*Agent) DisableServiceMaintenance 

func (a *Agent) DisableServiceMaintenance(serviceID string) error

DisableServiceMaintenance will deregister the fake maintenance mode check if the service has been marked as in maintenance.

func (*Agent) EnableNodeMaintenance 

func (a *Agent) EnableNodeMaintenance(reason, token string)

EnableNodeMaintenance places a node into maintenance mode.

func (*Agent) EnableServiceMaintenance 

func (a *Agent) EnableServiceMaintenance(serviceID, reason, token string) error

EnableServiceMaintenance will register a false health check against the given service ID with critical status. This will exclude the service from queries.

func (*Agent) ForceLeave 

func (a *Agent) ForceLeave(node string) (err error)

ForceLeave is used to remove a failed node from the cluster

func (*Agent) GetLANCoordinate 

func (a *Agent) GetLANCoordinate() (lib.CoordinateSet, error)

GetLANCoordinate returns the coordinates of this node in the local pools (assumes coordinates are enabled, so check that before calling).

func (*Agent) GossipEncrypted 

func (a *Agent) GossipEncrypted() bool

func (*Agent) InstallKey 

func (a *Agent) InstallKey(key, token string, relayFactor uint8) (*structs.KeyringResponses, error)

InstallKey installs a new gossip encryption key

func (*Agent) JoinLAN 

func (a *Agent) JoinLAN(addrs []string) (n int, err error)

JoinLAN is used to have the agent join a LAN cluster

func (*Agent) JoinWAN 

func (a *Agent) JoinWAN(addrs []string) (n int, err error)

JoinWAN is used to have the agent join a WAN cluster

func (*Agent) LANMembers 

func (a *Agent) LANMembers() []serf.Member

LANMembers is used to retrieve the LAN members

func (*Agent) LastUserEvent 

func (a *Agent) LastUserEvent() *UserEvent

LastUserEvent is used to return the lastest user event. This will return nil if there is no recent event.

func (*Agent) Leave 

func (a *Agent) Leave() error

Leave is used to prepare the agent for a graceful shutdown

func (*Agent) ListKeys 

func (a *Agent) ListKeys(token string, relayFactor uint8) (*structs.KeyringResponses, error)

ListKeys lists out all keys installed on the collective Consul cluster. This includes both servers and clients in all DC's.

func (*Agent) LocalMember 

func (a *Agent) LocalMember() serf.Member

LocalMember is used to return the local node

func (*Agent) PauseSync 

func (a *Agent) PauseSync()

PauseSync is used to pause anti-entropy while bulk changes are make

func (*Agent) RPC 

func (a *Agent) RPC(method string, args interface{}, reply interface{}) error

RPC is used to make an RPC call to the Consul servers This allows the agent to implement the Consul.Interface

func (*Agent) ReloadCh 

func (a *Agent) ReloadCh() chan chan error

ReloadCh is used to return a channel that can be used for triggering reloads and returning a response.

func (*Agent) ReloadConfig 

func (a *Agent) ReloadConfig(newCfg *Config) error

func (*Agent) RemoveCheck 

func (a *Agent) RemoveCheck(checkID types.CheckID, persist bool) error

RemoveCheck is used to remove a health check. The agent will make a best effort to ensure it is deregistered

func (*Agent) RemoveKey 

func (a *Agent) RemoveKey(key, token string, relayFactor uint8) (*structs.KeyringResponses, error)

RemoveKey will remove a gossip encryption key from the keyring

func (*Agent) RemoveService 

func (a *Agent) RemoveService(serviceID string, persist bool) error

RemoveService is used to remove a service entry. The agent will make a best effort to ensure it is deregistered

func (*Agent) ResumeSync 

func (a *Agent) ResumeSync()

ResumeSync is used to unpause anti-entropy after bulk changes are make

func (*Agent) RetryJoinCh 

func (a *Agent) RetryJoinCh() <-chan error

RetryJoinCh is a channel that transports errors from the retry join process.

func (*Agent) ShutdownAgent 

func (a *Agent) ShutdownAgent() error

ShutdownAgent is used to hard stop the agent. Should be preceded by Leave to do it gracefully. Should be followed by ShutdownEndpoints to terminate the HTTP and DNS servers as well.

func (*Agent) ShutdownCh 

func (a *Agent) ShutdownCh() <-chan struct{}

ShutdownCh is used to return a channel that can be selected to wait for the agent to perform a shutdown.

func (*Agent) ShutdownEndpoints 

func (a *Agent) ShutdownEndpoints()

ShutdownEndpoints terminates the HTTP and DNS servers. Should be preceeded by ShutdownAgent.

func (*Agent) SnapshotRPC 

func (a *Agent) SnapshotRPC(args *structs.SnapshotRequest, in io.Reader, out io.Writer,
	replyFn structs.SnapshotReplyFn) error

SnapshotRPC performs the requested snapshot RPC against the Consul server in a streaming manner. The contents of in will be read and passed along as the payload, and the response message will determine the error status, and any return payload will be written to out.

func (*Agent) Start 

func (a *Agent) Start() error

func (*Agent) StartSync 

func (a *Agent) StartSync()

StartSync is called once Services and Checks are registered. This is called to prevent a race between clients and the anti-entropy routines

func (*Agent) Stats 

func (a *Agent) Stats() map[string]map[string]string

Stats is used to get various debugging state from the sub-systems

func (*Agent) TranslateAddress added in v0.9.0 

func (a *Agent) TranslateAddress(dc string, addr string, taggedAddresses map[string]string) string

TranslateAddress is used to provide the final, translated address for a node, depending on how the agent and the other node are configured. The dc parameter is the dc the datacenter this node is from.

func (*Agent) TranslateAddresses added in v0.9.0 

func (a *Agent) TranslateAddresses(dc string, subj interface{})

TranslateAddresses translates addresses in the given structure into the final, translated address, depending on how the agent and the other node are configured. The dc parameter is the datacenter this structure is from.

func (*Agent) UseKey 

func (a *Agent) UseKey(key, token string, relayFactor uint8) (*structs.KeyringResponses, error)

UseKey changes the primary encryption key used to encrypt messages

func (*Agent) UserEvent 

func (a *Agent) UserEvent(dc, token string, params *UserEvent) error

UserEvent is used to fire an event via the Serf layer on the LAN

func (*Agent) UserEvents 

func (a *Agent) UserEvents() []*UserEvent

UserEvents is used to return a slice of the most recent user events.

func (*Agent) WANMembers 

func (a *Agent) WANMembers() []serf.Member

WANMembers is used to retrieve the WAN members

type Autopilot 

type Autopilot struct {
	// CleanupDeadServers enables the automatic cleanup of dead servers when new ones
	// are added to the peer list. Defaults to true.
	CleanupDeadServers *bool `mapstructure:"cleanup_dead_servers"`

	// LastContactThreshold is the limit on the amount of time a server can go
	// without leader contact before being considered unhealthy.
	LastContactThreshold    *time.Duration `mapstructure:"-" json:"-"`
	LastContactThresholdRaw string         `mapstructure:"last_contact_threshold"`

	// MaxTrailingLogs is the amount of entries in the Raft Log that a server can
	// be behind before being considered unhealthy.
	MaxTrailingLogs *uint64 `mapstructure:"max_trailing_logs"`

	// ServerStabilizationTime is the minimum amount of time a server must be
	// in a stable, healthy state before it can be added to the cluster. Only
	// applicable with Raft protocol version 3 or higher.
	ServerStabilizationTime    *time.Duration `mapstructure:"-" json:"-"`
	ServerStabilizationTimeRaw string         `mapstructure:"server_stabilization_time"`

	// (Enterprise-only) RedundancyZoneTag is the Meta tag to use for separating servers
	// into zones for redundancy. If left blank, this feature will be disabled.
	RedundancyZoneTag string `mapstructure:"redundancy_zone_tag"`

	// (Enterprise-only) DisableUpgradeMigration will disable Autopilot's upgrade migration
	// strategy of waiting until enough newer-versioned servers have been added to the
	// cluster before promoting them to voters.
	DisableUpgradeMigration *bool `mapstructure:"disable_upgrade_migration"`

	// (Enterprise-only) UpgradeVersionTag is the node tag to use for version info when
	// performing upgrade migrations. If left blank, the Consul version will be used.
	UpgradeVersionTag string `mapstructure:"upgrade_version_tag"`
}

Autopilot is used to configure helpful features for operating Consul servers.

type Blacklist added in v0.9.0 

type Blacklist struct {
	// contains filtered or unexported fields
}

Blacklist implements an HTTP endpoint blacklist based on a list of endpoint prefixes which should be blocked.

func NewBlacklist added in v0.9.0 

func NewBlacklist(prefixes []string) *Blacklist

NewBlacklist returns a blacklist for the given list of prefixes.

func (*Blacklist) Block added in v0.9.0 

func (b *Blacklist) Block(path string) bool

Block will return true if the given path is included among any of the blocked prefixes.

type CheckDocker 

type CheckDocker struct {
	Notify            CheckNotifier
	CheckID           types.CheckID
	Script            string
	DockerContainerID string
	Shell             string
	Interval          time.Duration
	Logger            *log.Logger
	// contains filtered or unexported fields
}

CheckDocker is used to periodically invoke a script to determine the health of an application running inside a Docker Container. We assume that the script is compatible with nagios plugins and expects the output in the same format.

func (*CheckDocker) Start 

func (c *CheckDocker) Start()

func (*CheckDocker) Stop 

func (c *CheckDocker) Stop()

type CheckHTTP 

type CheckHTTP struct {
	Notify        CheckNotifier
	CheckID       types.CheckID
	HTTP          string
	Header        map[string][]string
	Method        string
	Interval      time.Duration
	Timeout       time.Duration
	Logger        *log.Logger
	TLSSkipVerify bool
	// contains filtered or unexported fields
}

CheckHTTP is used to periodically make an HTTP request to determine the health of a given check. The check is passing if the response code is 2XX. The check is warning if the response code is 429. The check is critical if the response code is anything else or if the request returns an error

func (*CheckHTTP) Start 

func (c *CheckHTTP) Start()

Start is used to start an HTTP check. The check runs until stop is called

func (*CheckHTTP) Stop 

func (c *CheckHTTP) Stop()

Stop is used to stop an HTTP check.

type CheckMonitor 

type CheckMonitor struct {
	Notify   CheckNotifier
	CheckID  types.CheckID
	Script   string
	Interval time.Duration
	Timeout  time.Duration
	Logger   *log.Logger
	// contains filtered or unexported fields
}

CheckMonitor is used to periodically invoke a script to determine the health of a given check. It is compatible with nagios plugins and expects the output in the same format.

func (*CheckMonitor) Start 

func (c *CheckMonitor) Start()

Start is used to start a check monitor. Monitor runs until stop is called

func (*CheckMonitor) Stop 

func (c *CheckMonitor) Stop()

Stop is used to stop a check monitor.

type CheckNotifier 

type CheckNotifier interface {
	UpdateCheck(checkID types.CheckID, status, output string)
}

CheckNotifier interface is used by the CheckMonitor to notify when a check has a status update. The update should take care to be idempotent.

type CheckTCP 

type CheckTCP struct {
	Notify   CheckNotifier
	CheckID  types.CheckID
	TCP      string
	Interval time.Duration
	Timeout  time.Duration
	Logger   *log.Logger
	// contains filtered or unexported fields
}

CheckTCP is used to periodically make an TCP/UDP connection to determine the health of a given check. The check is passing if the connection succeeds The check is critical if the connection returns an error

func (*CheckTCP) Start 

func (c *CheckTCP) Start()

Start is used to start a TCP check. The check runs until stop is called

func (*CheckTCP) Stop 

func (c *CheckTCP) Stop()

Stop is used to stop a TCP check.

type CheckTTL 

type CheckTTL struct {
	Notify  CheckNotifier
	CheckID types.CheckID
	TTL     time.Duration
	Logger  *log.Logger
	// contains filtered or unexported fields
}

CheckTTL is used to apply a TTL to check status, and enables clients to set the status of a check but upon the TTL expiring, the check status is automatically set to critical.

func (*CheckTTL) SetStatus 

func (c *CheckTTL) SetStatus(status, output string)

SetStatus is used to update the status of the check, and to renew the TTL. If expired, TTL is restarted.

func (*CheckTTL) Start 

func (c *CheckTTL) Start()

Start is used to start a check ttl, runs until Stop()

func (*CheckTTL) Stop 

func (c *CheckTTL) Stop()

Stop is used to stop a check ttl.

type Config 

type Config struct {
	// DevMode enables a fast-path mode of operation to bring up an in-memory
	// server with minimal configuration. Useful for developing Consul.
	DevMode bool `mapstructure:"-"`

	// Limits is used to configure limits enforced by the agent.
	Limits Limits `mapstructure:"limits"`

	// Performance is used to tune the performance of Consul's subsystems.
	Performance Performance `mapstructure:"performance"`

	// Bootstrap is used to bring up the first Consul server, and
	// permits that node to elect itself leader
	Bootstrap bool `mapstructure:"bootstrap"`

	// BootstrapExpect tries to automatically bootstrap the Consul cluster,
	// by withholding peers until enough servers join.
	BootstrapExpect int `mapstructure:"bootstrap_expect"`

	// Server controls if this agent acts like a Consul server,
	// or merely as a client. Servers have more state, take part
	// in leader election, etc.
	Server bool `mapstructure:"server"`

	// (Enterprise-only) NonVotingServer is whether this server will act as a non-voting member
	// of the cluster to help provide read scalability.
	NonVotingServer bool `mapstructure:"non_voting_server"`

	// Datacenter is the datacenter this node is in. Defaults to dc1
	Datacenter string `mapstructure:"datacenter"`

	// DataDir is the directory to store our state in
	DataDir string `mapstructure:"data_dir"`

	// DNSRecursors can be set to allow the DNS servers to recursively
	// resolve non-consul domains. It is deprecated, and merges into the
	// recursors array.
	DNSRecursor string `mapstructure:"recursor"`

	// DNSRecursors can be set to allow the DNS servers to recursively
	// resolve non-consul domains
	DNSRecursors []string `mapstructure:"recursors"`

	// DNS configuration
	DNSConfig DNSConfig `mapstructure:"dns_config"`

	// Domain is the DNS domain for the records. Defaults to "consul."
	Domain string `mapstructure:"domain"`

	// HTTP configuration
	HTTPConfig HTTPConfig `mapstructure:"http_config"`

	// Encryption key to use for the Serf communication
	EncryptKey string `mapstructure:"encrypt" json:"-"`

	// Disables writing the keyring to a file.
	DisableKeyringFile bool `mapstructure:"disable_keyring_file"`

	// EncryptVerifyIncoming and EncryptVerifyOutgoing are used to enforce
	// incoming/outgoing gossip encryption and can be used to upshift to
	// encrypted gossip on a running cluster.
	EncryptVerifyIncoming *bool `mapstructure:"encrypt_verify_incoming"`
	EncryptVerifyOutgoing *bool `mapstructure:"encrypt_verify_outgoing"`

	// LogLevel is the level of the logs to putout
	LogLevel string `mapstructure:"log_level"`

	// Node ID is a unique ID for this node across space and time. Defaults
	// to a randomly-generated ID that persists in the data-dir.
	NodeID types.NodeID `mapstructure:"node_id"`

	// DisableHostNodeID will prevent Consul from using information from the
	// host to generate a node ID, and will cause Consul to generate a
	// random ID instead.
	DisableHostNodeID *bool `mapstructure:"disable_host_node_id"`

	// Node name is the name we use to advertise. Defaults to hostname.
	NodeName string `mapstructure:"node_name"`

	// ClientAddr is used to control the address we bind to for
	// client services (DNS, HTTP, HTTPS, RPC)
	ClientAddr string `mapstructure:"client_addr"`

	// BindAddr is used to control the address we bind to.
	// If not specified, the first private IP we find is used.
	// This controls the address we use for cluster facing
	// services (Gossip, Server RPC)
	BindAddr string `mapstructure:"bind_addr"`

	// SerfWanBindAddr is used to control the address we bind to.
	// If not specified, the first private IP we find is used.
	// This controls the address we use for cluster facing
	// services (Gossip) Serf
	SerfWanBindAddr string `mapstructure:"serf_wan_bind"`

	// SerfLanBindAddr is used to control the address we bind to.
	// If not specified, the first private IP we find is used.
	// This controls the address we use for cluster facing
	// services (Gossip) Serf
	SerfLanBindAddr string `mapstructure:"serf_lan_bind"`

	// AdvertiseAddr is the address we use for advertising our Serf,
	// and Consul RPC IP. If not specified, bind address is used.
	AdvertiseAddr string `mapstructure:"advertise_addr"`

	// AdvertiseAddrs configuration
	AdvertiseAddrs AdvertiseAddrsConfig `mapstructure:"advertise_addrs"`

	// AdvertiseAddrWan is the address we use for advertising our
	// Serf WAN IP. If not specified, the general advertise address is used.
	AdvertiseAddrWan string `mapstructure:"advertise_addr_wan"`

	// TranslateWanAddrs controls whether or not Consul should prefer
	// the "wan" tagged address when doing lookups in remote datacenters.
	// See TaggedAddresses below for more details.
	TranslateWanAddrs bool `mapstructure:"translate_wan_addrs"`

	// Port configurations
	Ports PortConfig

	// Address configurations
	Addresses AddressConfig

	// (Enterprise-only) NetworkSegment is the network segment for this client to join.
	Segment string `mapstructure:"segment"`

	// (Enterprise-only) Segments is the list of network segments for this server to
	// initialize.
	Segments []NetworkSegment `mapstructure:"segments"`

	// Tagged addresses. These are used to publish a set of addresses for
	// for a node, which can be used by the remote agent. We currently
	// populate only the "wan" tag based on the SerfWan advertise address,
	// but this structure is here for possible future features with other
	// user-defined tags. The "wan" tag will be used by remote agents if
	// they are configured with TranslateWanAddrs set to true.
	TaggedAddresses map[string]string

	// Node metadata key/value pairs. These are excluded from JSON output
	// because they can be reloaded and might be stale when shown from the
	// config instead of the local state.
	Meta map[string]string `mapstructure:"node_meta" json:"-"`

	// LeaveOnTerm controls if Serf does a graceful leave when receiving
	// the TERM signal. Defaults true on clients, false on servers. This can
	// be changed on reload.
	LeaveOnTerm *bool `mapstructure:"leave_on_terminate"`

	// SkipLeaveOnInt controls if Serf skips a graceful leave when
	// receiving the INT signal. Defaults false on clients, true on
	// servers. This can be changed on reload.
	SkipLeaveOnInt *bool `mapstructure:"skip_leave_on_interrupt"`

	// Autopilot is used to configure helpful features for operating Consul servers.
	Autopilot Autopilot `mapstructure:"autopilot"`

	Telemetry Telemetry `mapstructure:"telemetry"`

	// Protocol is the Consul protocol version to use.
	Protocol int `mapstructure:"protocol"`

	// RaftProtocol sets the Raft protocol version to use on this server.
	RaftProtocol int `mapstructure:"raft_protocol"`

	// EnableDebug is used to enable various debugging features
	EnableDebug bool `mapstructure:"enable_debug"`

	// VerifyIncoming is used to verify the authenticity of incoming connections.
	// This means that TCP requests are forbidden, only allowing for TLS. TLS connections
	// must match a provided certificate authority. This can be used to force client auth.
	VerifyIncoming bool `mapstructure:"verify_incoming"`

	// VerifyIncomingRPC is used to verify the authenticity of incoming RPC connections.
	// This means that TCP requests are forbidden, only allowing for TLS. TLS connections
	// must match a provided certificate authority. This can be used to force client auth.
	VerifyIncomingRPC bool `mapstructure:"verify_incoming_rpc"`

	// VerifyIncomingHTTPS is used to verify the authenticity of incoming HTTPS connections.
	// This means that TCP requests are forbidden, only allowing for TLS. TLS connections
	// must match a provided certificate authority. This can be used to force client auth.
	VerifyIncomingHTTPS bool `mapstructure:"verify_incoming_https"`

	// VerifyOutgoing is used to verify the authenticity of outgoing connections.
	// This means that TLS requests are used. TLS connections must match a provided
	// certificate authority. This is used to verify authenticity of server nodes.
	VerifyOutgoing bool `mapstructure:"verify_outgoing"`

	// VerifyServerHostname is used to enable hostname verification of servers. This
	// ensures that the certificate presented is valid for server.<datacenter>.<domain>.
	// This prevents a compromised client from being restarted as a server, and then
	// intercepting request traffic as well as being added as a raft peer. This should be
	// enabled by default with VerifyOutgoing, but for legacy reasons we cannot break
	// existing clients.
	VerifyServerHostname bool `mapstructure:"verify_server_hostname"`

	// CAFile is a path to a certificate authority file. This is used with VerifyIncoming
	// or VerifyOutgoing to verify the TLS connection.
	CAFile string `mapstructure:"ca_file"`

	// CAPath is a path to a directory of certificate authority files. This is used with
	// VerifyIncoming or VerifyOutgoing to verify the TLS connection.
	CAPath string `mapstructure:"ca_path"`

	// CertFile is used to provide a TLS certificate that is used for serving TLS connections.
	// Must be provided to serve TLS connections.
	CertFile string `mapstructure:"cert_file"`

	// KeyFile is used to provide a TLS key that is used for serving TLS connections.
	// Must be provided to serve TLS connections.
	KeyFile string `mapstructure:"key_file"`

	// ServerName is used with the TLS certificates to ensure the name we
	// provide matches the certificate
	ServerName string `mapstructure:"server_name"`

	// TLSMinVersion is used to set the minimum TLS version used for TLS connections.
	TLSMinVersion string `mapstructure:"tls_min_version"`

	// TLSCipherSuites is used to specify the list of supported ciphersuites.
	TLSCipherSuites    []uint16 `mapstructure:"-" json:"-"`
	TLSCipherSuitesRaw string   `mapstructure:"tls_cipher_suites"`

	// TLSPreferServerCipherSuites specifies whether to prefer the server's ciphersuite
	// over the client ciphersuites.
	TLSPreferServerCipherSuites bool `mapstructure:"tls_prefer_server_cipher_suites"`

	// StartJoin is a list of addresses to attempt to join when the
	// agent starts. If Serf is unable to communicate with any of these
	// addresses, then the agent will error and exit.
	StartJoin []string `mapstructure:"start_join"`

	// StartJoinWan is a list of addresses to attempt to join -wan when the
	// agent starts. If Serf is unable to communicate with any of these
	// addresses, then the agent will error and exit.
	StartJoinWan []string `mapstructure:"start_join_wan"`

	// RetryJoin is a list of addresses to join with retry enabled.
	RetryJoin []string `mapstructure:"retry_join" json:"-"`

	// RetryMaxAttempts specifies the maximum number of times to retry joining a
	// host on startup. This is useful for cases where we know the node will be
	// online eventually.
	RetryMaxAttempts int `mapstructure:"retry_max"`

	// RetryInterval specifies the amount of time to wait in between join
	// attempts on agent start. The minimum allowed value is 1 second and
	// the default is 30s.
	RetryInterval    time.Duration `mapstructure:"-" json:"-"`
	RetryIntervalRaw string        `mapstructure:"retry_interval"`

	// RetryJoinWan is a list of addresses to join -wan with retry enabled.
	RetryJoinWan []string `mapstructure:"retry_join_wan"`

	// RetryMaxAttemptsWan specifies the maximum number of times to retry joining a
	// -wan host on startup. This is useful for cases where we know the node will be
	// online eventually.
	RetryMaxAttemptsWan int `mapstructure:"retry_max_wan"`

	// RetryIntervalWan specifies the amount of time to wait in between join
	// -wan attempts on agent start. The minimum allowed value is 1 second and
	// the default is 30s.
	RetryIntervalWan    time.Duration `mapstructure:"-" json:"-"`
	RetryIntervalWanRaw string        `mapstructure:"retry_interval_wan"`

	// ReconnectTimeout* specify the amount of time to wait to reconnect with
	// another agent before deciding it's permanently gone. This can be used to
	// control the time it takes to reap failed nodes from the cluster.
	ReconnectTimeoutLan    time.Duration `mapstructure:"-"`
	ReconnectTimeoutLanRaw string        `mapstructure:"reconnect_timeout"`
	ReconnectTimeoutWan    time.Duration `mapstructure:"-"`
	ReconnectTimeoutWanRaw string        `mapstructure:"reconnect_timeout_wan"`

	// EnableUI enables the statically-compiled assets for the Consul web UI and
	// serves them at the default /ui/ endpoint automatically.
	EnableUI bool `mapstructure:"ui"`

	// UIDir is the directory containing the Web UI resources.
	// If provided, the UI endpoints will be enabled.
	UIDir string `mapstructure:"ui_dir"`

	// PidFile is the file to store our PID in
	PidFile string `mapstructure:"pid_file"`

	// EnableSyslog is used to also tee all the logs over to syslog. Only supported
	// on linux and OSX. Other platforms will generate an error.
	EnableSyslog bool `mapstructure:"enable_syslog"`

	// SyslogFacility is used to control where the syslog messages go
	// By default, goes to LOCAL0
	SyslogFacility string `mapstructure:"syslog_facility"`

	// RejoinAfterLeave controls our interaction with the cluster after leave.
	// When set to false (default), a leave causes Consul to not rejoin
	// the cluster until an explicit join is received. If this is set to
	// true, we ignore the leave, and rejoin the cluster on start.
	RejoinAfterLeave bool `mapstructure:"rejoin_after_leave"`

	// EnableScriptChecks controls whether health checks which execute
	// scripts are enabled. This includes regular script checks and Docker
	// checks.
	EnableScriptChecks bool `mapstructure:"enable_script_checks"`

	// CheckUpdateInterval controls the interval on which the output of a health check
	// is updated if there is no change to the state. For example, a check in a steady
	// state may run every 5 second generating a unique output (timestamp, etc), forcing
	// constant writes. This allows Consul to defer the write for some period of time,
	// reducing the write pressure when the state is steady.
	CheckUpdateInterval    time.Duration `mapstructure:"-"`
	CheckUpdateIntervalRaw string        `mapstructure:"check_update_interval" json:"-"`

	// CheckReapInterval controls the interval on which we will look for
	// failed checks and reap their associated services, if so configured.
	CheckReapInterval time.Duration `mapstructure:"-"`

	// CheckDeregisterIntervalMin is the smallest allowed interval to set
	// a check's DeregisterCriticalServiceAfter value to.
	CheckDeregisterIntervalMin time.Duration `mapstructure:"-"`

	// ACLToken is the default token used to make requests if a per-request
	// token is not provided. If not configured the 'anonymous' token is used.
	ACLToken string `mapstructure:"acl_token" json:"-"`

	// ACLAgentMasterToken is a special token that has full read and write
	// privileges for this agent, and can be used to call agent endpoints
	// when no servers are available.
	ACLAgentMasterToken string `mapstructure:"acl_agent_master_token" json:"-"`

	// ACLAgentToken is the default token used to make requests for the agent
	// itself, such as for registering itself with the catalog. If not
	// configured, the 'acl_token' will be used.
	ACLAgentToken string `mapstructure:"acl_agent_token" json:"-"`

	// ACLMasterToken is used to bootstrap the ACL system. It should be specified
	// on the servers in the ACLDatacenter. When the leader comes online, it ensures
	// that the Master token is available. This provides the initial token.
	ACLMasterToken string `mapstructure:"acl_master_token" json:"-"`

	// ACLDatacenter is the central datacenter that holds authoritative
	// ACL records. This must be the same for the entire cluster.
	// If this is not set, ACLs are not enabled. Off by default.
	ACLDatacenter string `mapstructure:"acl_datacenter"`

	// ACLTTL is used to control the time-to-live of cached ACLs . This has
	// a major impact on performance. By default, it is set to 30 seconds.
	ACLTTL    time.Duration `mapstructure:"-"`
	ACLTTLRaw string        `mapstructure:"acl_ttl"`

	// ACLDefaultPolicy is used to control the ACL interaction when
	// there is no defined policy. This can be "allow" which means
	// ACLs are used to black-list, or "deny" which means ACLs are
	// white-lists.
	ACLDefaultPolicy string `mapstructure:"acl_default_policy"`

	// ACLDisabledTTL is used by clients to determine how long they will
	// wait to check again with the servers if they discover ACLs are not
	// enabled.
	ACLDisabledTTL time.Duration `mapstructure:"-"`

	// ACLDownPolicy is used to control the ACL interaction when we cannot
	// reach the ACLDatacenter and the token is not in the cache.
	// There are two modes:
	//   * allow - Allow all requests
	//   * deny - Deny all requests
	//   * extend-cache - Ignore the cache expiration, and allow cached
	//                    ACL's to be used to service requests. This
	//                    is the default. If the ACL is not in the cache,
	//                    this acts like deny.
	ACLDownPolicy string `mapstructure:"acl_down_policy"`

	// EnableACLReplication is used to turn on ACL replication when using
	// /v1/agent/token/acl_replication_token to introduce the token, instead
	// of setting acl_replication_token in the config. Setting the token via
	// config will also set this to true for backward compatibility.
	EnableACLReplication bool `mapstructure:"enable_acl_replication"`

	// ACLReplicationToken is used to fetch ACLs from the ACLDatacenter in
	// order to replicate them locally. Setting this to a non-empty value
	// also enables replication. Replication is only available in datacenters
	// other than the ACLDatacenter.
	ACLReplicationToken string `mapstructure:"acl_replication_token" json:"-"`

	// ACLEnforceVersion8 is used to gate a set of ACL policy features that
	// are opt-in prior to Consul 0.8 and opt-out in Consul 0.8 and later.
	ACLEnforceVersion8 *bool `mapstructure:"acl_enforce_version_8"`

	// Watches are used to monitor various endpoints and to invoke a
	// handler to act appropriately. These are managed entirely in the
	// agent layer using the standard APIs.
	Watches []map[string]interface{} `mapstructure:"watches"`

	// DisableRemoteExec is used to turn off the remote execution
	// feature. This is for security to prevent unknown scripts from running.
	DisableRemoteExec *bool `mapstructure:"disable_remote_exec"`

	// DisableUpdateCheck is used to turn off the automatic update and
	// security bulletin checking.
	DisableUpdateCheck bool `mapstructure:"disable_update_check"`

	// DisableAnonymousSignature is used to turn off the anonymous signature
	// send with the update check. This is used to deduplicate messages.
	DisableAnonymousSignature bool `mapstructure:"disable_anonymous_signature"`

	// AEInterval controls the anti-entropy interval. This is how often
	// the agent attempts to reconcile its local state with the server's
	// representation of our state. Defaults to every 60s.
	AEInterval time.Duration `mapstructure:"-" json:"-"`

	// DisableCoordinates controls features related to network coordinates.
	DisableCoordinates bool `mapstructure:"disable_coordinates"`

	// SyncCoordinateRateTarget controls the rate for sending network
	// coordinates to the server, in updates per second. This is the max rate
	// that the server supports, so we scale our interval based on the size
	// of the cluster to try to achieve this in aggregate at the server.
	SyncCoordinateRateTarget float64 `mapstructure:"-" json:"-"`

	// SyncCoordinateIntervalMin sets the minimum interval that coordinates
	// will be sent to the server. We scale the interval based on the cluster
	// size, but below a certain interval it doesn't make sense send them any
	// faster.
	SyncCoordinateIntervalMin time.Duration `mapstructure:"-" json:"-"`

	// Checks holds the provided check definitions
	Checks []*structs.CheckDefinition `mapstructure:"-" json:"-"`

	// Services holds the provided service definitions
	Services []*structs.ServiceDefinition `mapstructure:"-" json:"-"`

	// ConsulConfig can either be provided or a default one created
	ConsulConfig *consul.Config `mapstructure:"-" json:"-"`

	// Revision is the GitCommit this maps to
	Revision string `mapstructure:"-"`

	// Version is the release version number
	Version string `mapstructure:"-"`

	// VersionPrerelease is a label for pre-release builds
	VersionPrerelease string `mapstructure:"-"`

	// WatchPlans contains the compiled watches
	WatchPlans []*watch.Plan `mapstructure:"-" json:"-"`

	// UnixSockets is a map of socket configuration data
	UnixSockets UnixSocketConfig `mapstructure:"unix_sockets"`

	// Minimum Session TTL
	SessionTTLMin    time.Duration `mapstructure:"-"`
	SessionTTLMinRaw string        `mapstructure:"session_ttl_min"`

	// deprecated fields
	// keep them exported since otherwise the error messages don't show up
	DeprecatedAtlasInfrastructure    string            `mapstructure:"atlas_infrastructure" json:"-"`
	DeprecatedAtlasToken             string            `mapstructure:"atlas_token" json:"-"`
	DeprecatedAtlasACLToken          string            `mapstructure:"atlas_acl_token" json:"-"`
	DeprecatedAtlasJoin              bool              `mapstructure:"atlas_join" json:"-"`
	DeprecatedAtlasEndpoint          string            `mapstructure:"atlas_endpoint" json:"-"`
	DeprecatedHTTPAPIResponseHeaders map[string]string `mapstructure:"http_api_response_headers"`
	DeprecatedRetryJoinEC2           RetryJoinEC2      `mapstructure:"retry_join_ec2"`
	DeprecatedRetryJoinGCE           RetryJoinGCE      `mapstructure:"retry_join_gce"`
	DeprecatedRetryJoinAzure         RetryJoinAzure    `mapstructure:"retry_join_azure"`
}

Config is the configuration that can be set for an Agent. Some of this is configurable as CLI flags, but most must be set using a configuration file.

func DecodeConfig 

func DecodeConfig(r io.Reader) (*Config, error)

DecodeConfig reads the configuration from the given reader in JSON format and decodes it into a proper Config structure.

func DefaultConfig 

func DefaultConfig() *Config

DefaultConfig is used to return a sane default configuration

func DevConfig 

func DevConfig() *Config

DevConfig is used to return a set of configuration to use for dev mode.

func MergeConfig 

func MergeConfig(a, b *Config) *Config

MergeConfig merges two configurations together to make a single new configuration.

func ReadConfigPaths 

func ReadConfigPaths(paths []string) (*Config, error)

ReadConfigPaths reads the paths in the given order to load configurations. The paths can be to files or directories. If the path is a directory, we read one directory deep and read any files ending in ".json" as configuration files.

func TestACLConfig 

func TestACLConfig() *Config

TestACLConfig returns a default configuration for testing an agent with ACLs.

func TestConfig 

func TestConfig() *Config

TestConfig returns a unique default configuration for testing an agent.

func (*Config) ClientListener 

func (c *Config) ClientListener(override string, port int) (net.Addr, error)

ClientListener is used to format a listener for a port on a ClientAddr

func (*Config) DNSAddrs 

func (c *Config) DNSAddrs() ([]ProtoAddr, error)

func (*Config) EncryptBytes 

func (c *Config) EncryptBytes() ([]byte, error)

EncryptBytes returns the encryption key configured.

func (*Config) HTTPAddrs 

func (c *Config) HTTPAddrs() ([]ProtoAddr, error)

HTTPAddrs returns the bind addresses for the HTTP server and the application protocol which should be served, e.g. 'http' or 'https'.

func (*Config) IncomingHTTPSConfig 

func (c *Config) IncomingHTTPSConfig() (*tls.Config, error)

IncomingHTTPSConfig returns the TLS configuration for HTTPS connections to consul.

func (*Config) ResolveTmplAddrs added in v0.9.1 

func (c *Config) ResolveTmplAddrs() (err error)

ResolveTmplAddrs iterates over the myriad of addresses in the agent's config and performs go-sockaddr/template Parse on each known address in case the user specified a template config for any of their values.

func (*Config) SetupTaggedAndAdvertiseAddrs added in v0.9.1 

func (cfg *Config) SetupTaggedAndAdvertiseAddrs() error

SetupTaggedAndAdvertiseAddrs configures advertise addresses and sets up a map of tagged addresses

func (*Config) VerifyUniqueListeners 

func (c *Config) VerifyUniqueListeners() error

VerifyUniqueListeners checks to see if an address was used more than once in the config

type CriticalCheck 

type CriticalCheck struct {
	CriticalFor time.Duration
	Check       *structs.HealthCheck
}

CriticalCheck is used to return the duration a check has been critical along with its associated health check.

type DNSConfig 

type DNSConfig struct {
	// NodeTTL provides the TTL value for a node query
	NodeTTL    time.Duration `mapstructure:"-"`
	NodeTTLRaw string        `mapstructure:"node_ttl" json:"-"`

	// ServiceTTL provides the TTL value for a service
	// query for given service. The "*" wildcard can be used
	// to set a default for all services.
	ServiceTTL    map[string]time.Duration `mapstructure:"-"`
	ServiceTTLRaw map[string]string        `mapstructure:"service_ttl" json:"-"`

	// AllowStale is used to enable lookups with stale
	// data. This gives horizontal read scalability since
	// any Consul server can service the query instead of
	// only the leader.
	AllowStale *bool `mapstructure:"allow_stale"`

	// EnableTruncate is used to enable setting the truncate
	// flag for UDP DNS queries.  This allows unmodified
	// clients to re-query the consul server using TCP
	// when the total number of records exceeds the number
	// returned by default for UDP.
	EnableTruncate bool `mapstructure:"enable_truncate"`

	// UDPAnswerLimit is used to limit the maximum number of DNS Resource
	// Records returned in the ANSWER section of a DNS response. This is
	// not normally useful and will be limited based on the querying
	// protocol, however systems that implemented §6 Rule 9 in RFC3484
	// may want to set this to `1` in order to subvert §6 Rule 9 and
	// re-obtain the effect of randomized resource records (i.e. each
	// answer contains only one IP, but the IP changes every request).
	// RFC3484 sorts answers in a deterministic order, which defeats the
	// purpose of randomized DNS responses.  This RFC has been obsoleted
	// by RFC6724 and restores the desired behavior of randomized
	// responses, however a large number of Linux hosts using glibc(3)
	// implemented §6 Rule 9 and may need this option (e.g. CentOS 5-6,
	// Debian Squeeze, etc).
	UDPAnswerLimit int `mapstructure:"udp_answer_limit"`

	// MaxStale is used to bound how stale of a result is
	// accepted for a DNS lookup. This can be used with
	// AllowStale to limit how old of a value is served up.
	// If the stale result exceeds this, another non-stale
	// stale read is performed.
	MaxStale    time.Duration `mapstructure:"-"`
	MaxStaleRaw string        `mapstructure:"max_stale" json:"-"`

	// OnlyPassing is used to determine whether to filter nodes
	// whose health checks are in any non-passing state. By
	// default, only nodes in a critical state are excluded.
	OnlyPassing bool `mapstructure:"only_passing"`

	// DisableCompression is used to control whether DNS responses are
	// compressed. In Consul 0.7 this was turned on by default and this
	// config was added as an opt-out.
	DisableCompression bool `mapstructure:"disable_compression"`

	// RecursorTimeout specifies the timeout in seconds
	// for Consul's internal dns client used for recursion.
	// This value is used for the connection, read and write timeout.
	// Default: 2s
	RecursorTimeout    time.Duration `mapstructure:"-"`
	RecursorTimeoutRaw string        `mapstructure:"recursor_timeout" json:"-"`
}

DNSConfig is used to fine tune the DNS sub-system. It can be used to control cache values, and stale reads

type DNSServer 

type DNSServer struct {
	*dns.Server
	// contains filtered or unexported fields
}

DNSServer is used to wrap an Agent and expose various service discovery endpoints using a DNS interface.

func NewDNSServer 

func NewDNSServer(a *Agent) (*DNSServer, error)

func (*DNSServer) ListenAndServe 

func (s *DNSServer) ListenAndServe(network, addr string, notif func()) error

type DockerClient 

type DockerClient struct {
	// contains filtered or unexported fields
}

DockerClient is a simplified client for the Docker Engine API to execute the health checks and avoid significant dependencies. It also consumes all data returned from the Docker API through a ring buffer with a fixed limit to avoid excessive resource consumption.

func NewDockerClient added in v0.9.0 

func NewDockerClient(host string, maxbuf int64) (*DockerClient, error)

func (*DockerClient) CreateExec 

func (c *DockerClient) CreateExec(containerID string, cmd []string) (string, error)

func (*DockerClient) InspectExec 

func (c *DockerClient) InspectExec(containerID, execID string) (int, error)

func (*DockerClient) StartExec 

func (c *DockerClient) StartExec(containerID, execID string) (*circbuf.Buffer, error)

type FilePermissions 

type FilePermissions interface {
	// User returns a user ID or user name
	User() string

	// Group returns a group ID. Group names are not supported.
	Group() string

	// Mode returns a string of file mode bits e.g. "0644"
	Mode() string
}

FilePermissions is an interface which allows a struct to set ownership and permissions easily on a file it describes.

type HTTPConfig 

type HTTPConfig struct {
	// BlockEndpoints is a list of endpoint prefixes to block in the
	// HTTP API. Any requests to these will get a 403 response.
	BlockEndpoints []string `mapstructure:"block_endpoints"`

	// ResponseHeaders are used to add HTTP header response fields to the HTTP API responses.
	ResponseHeaders map[string]string `mapstructure:"response_headers"`
}

HTTPConfig is used to fine tune the Http sub-system.

type HTTPServer 

type HTTPServer struct {
	*http.Server
	// contains filtered or unexported fields
}

HTTPServer provides an HTTP api for an agent.

func NewHTTPServer 

func NewHTTPServer(addr string, a *Agent) *HTTPServer

func (*HTTPServer) ACLBootstrap added in v0.9.1 

func (s *HTTPServer) ACLBootstrap(resp http.ResponseWriter, req *http.Request) (interface{}, error)

ACLBootstrap is used to perform a one-time ACL bootstrap operation on a cluster to get the first management token.

func (*HTTPServer) ACLClone 

func (s *HTTPServer) ACLClone(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLCreate 

func (s *HTTPServer) ACLCreate(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLDestroy 

func (s *HTTPServer) ACLDestroy(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLGet 

func (s *HTTPServer) ACLGet(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLList 

func (s *HTTPServer) ACLList(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLReplicationStatus 

func (s *HTTPServer) ACLReplicationStatus(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) ACLUpdate 

func (s *HTTPServer) ACLUpdate(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentCheckFail 

func (s *HTTPServer) AgentCheckFail(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentCheckPass 

func (s *HTTPServer) AgentCheckPass(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentCheckUpdate 

func (s *HTTPServer) AgentCheckUpdate(resp http.ResponseWriter, req *http.Request) (interface{}, error)

AgentCheckUpdate is a PUT-based alternative to the GET-based Pass/Warn/Fail APIs.

func (*HTTPServer) AgentCheckWarn 

func (s *HTTPServer) AgentCheckWarn(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentChecks 

func (s *HTTPServer) AgentChecks(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentDeregisterCheck 

func (s *HTTPServer) AgentDeregisterCheck(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentDeregisterService 

func (s *HTTPServer) AgentDeregisterService(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentForceLeave 

func (s *HTTPServer) AgentForceLeave(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentJoin 

func (s *HTTPServer) AgentJoin(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentLeave 

func (s *HTTPServer) AgentLeave(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentMembers 

func (s *HTTPServer) AgentMembers(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentMetrics added in v0.9.1 

func (s *HTTPServer) AgentMetrics(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentMonitor 

func (s *HTTPServer) AgentMonitor(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentNodeMaintenance 

func (s *HTTPServer) AgentNodeMaintenance(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentRegisterCheck 

func (s *HTTPServer) AgentRegisterCheck(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentRegisterService 

func (s *HTTPServer) AgentRegisterService(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentReload 

func (s *HTTPServer) AgentReload(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentSelf 

func (s *HTTPServer) AgentSelf(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentServiceMaintenance 

func (s *HTTPServer) AgentServiceMaintenance(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentServices 

func (s *HTTPServer) AgentServices(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) AgentToken added in v0.9.1 

func (s *HTTPServer) AgentToken(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogDatacenters 

func (s *HTTPServer) CatalogDatacenters(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogDeregister 

func (s *HTTPServer) CatalogDeregister(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogNodeServices 

func (s *HTTPServer) CatalogNodeServices(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogNodes 

func (s *HTTPServer) CatalogNodes(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogRegister 

func (s *HTTPServer) CatalogRegister(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogServiceNodes 

func (s *HTTPServer) CatalogServiceNodes(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CatalogServices 

func (s *HTTPServer) CatalogServices(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) CoordinateDatacenters 

func (s *HTTPServer) CoordinateDatacenters(resp http.ResponseWriter, req *http.Request) (interface{}, error)

CoordinateDatacenters returns the WAN nodes in each datacenter, along with raw network coordinates.

func (*HTTPServer) CoordinateNodes 

func (s *HTTPServer) CoordinateNodes(resp http.ResponseWriter, req *http.Request) (interface{}, error)

CoordinateNodes returns the LAN nodes in the given datacenter, along with raw network coordinates.

func (*HTTPServer) EventFire 

func (s *HTTPServer) EventFire(resp http.ResponseWriter, req *http.Request) (interface{}, error)

EventFire is used to fire a new event

func (*HTTPServer) EventList 

func (s *HTTPServer) EventList(resp http.ResponseWriter, req *http.Request) (interface{}, error)

EventList is used to retrieve the recent list of events

func (*HTTPServer) HealthChecksInState 

func (s *HTTPServer) HealthChecksInState(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) HealthNodeChecks 

func (s *HTTPServer) HealthNodeChecks(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) HealthServiceChecks 

func (s *HTTPServer) HealthServiceChecks(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) HealthServiceNodes 

func (s *HTTPServer) HealthServiceNodes(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) Index 

func (s *HTTPServer) Index(resp http.ResponseWriter, req *http.Request)

Renders a simple index page

func (*HTTPServer) IsUIEnabled 

func (s *HTTPServer) IsUIEnabled() bool

Returns true if the UI is enabled.

func (*HTTPServer) KVSDelete 

func (s *HTTPServer) KVSDelete(resp http.ResponseWriter, req *http.Request, args *structs.KeyRequest) (interface{}, error)

KVSPut handles a DELETE request

func (*HTTPServer) KVSEndpoint 

func (s *HTTPServer) KVSEndpoint(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) KVSGet 

func (s *HTTPServer) KVSGet(resp http.ResponseWriter, req *http.Request, args *structs.KeyRequest) (interface{}, error)

KVSGet handles a GET request

func (*HTTPServer) KVSGetKeys 

func (s *HTTPServer) KVSGetKeys(resp http.ResponseWriter, req *http.Request, args *structs.KeyRequest) (interface{}, error)

KVSGetKeys handles a GET request for keys

func (*HTTPServer) KVSPut 

func (s *HTTPServer) KVSPut(resp http.ResponseWriter, req *http.Request, args *structs.KeyRequest) (interface{}, error)

KVSPut handles a PUT request

func (*HTTPServer) KeyringInstall 

func (s *HTTPServer) KeyringInstall(resp http.ResponseWriter, req *http.Request, args *keyringArgs) (interface{}, error)

KeyringInstall is used to install a new gossip encryption key into the cluster

func (*HTTPServer) KeyringList 

func (s *HTTPServer) KeyringList(resp http.ResponseWriter, req *http.Request, args *keyringArgs) (interface{}, error)

KeyringList is used to list the keys installed in the cluster

func (*HTTPServer) KeyringRemove 

func (s *HTTPServer) KeyringRemove(resp http.ResponseWriter, req *http.Request, args *keyringArgs) (interface{}, error)

KeyringRemove is used to list the keys installed in the cluster

func (*HTTPServer) KeyringUse 

func (s *HTTPServer) KeyringUse(resp http.ResponseWriter, req *http.Request, args *keyringArgs) (interface{}, error)

KeyringUse is used to change the primary gossip encryption key

func (*HTTPServer) OperatorAutopilotConfiguration 

func (s *HTTPServer) OperatorAutopilotConfiguration(resp http.ResponseWriter, req *http.Request) (interface{}, error)

OperatorAutopilotConfiguration is used to inspect the current Autopilot configuration. This supports the stale query mode in case the cluster doesn't have a leader.

func (*HTTPServer) OperatorKeyringEndpoint 

func (s *HTTPServer) OperatorKeyringEndpoint(resp http.ResponseWriter, req *http.Request) (interface{}, error)

OperatorKeyringEndpoint handles keyring operations (install, list, use, remove)

func (*HTTPServer) OperatorRaftConfiguration 

func (s *HTTPServer) OperatorRaftConfiguration(resp http.ResponseWriter, req *http.Request) (interface{}, error)

OperatorRaftConfiguration is used to inspect the current Raft configuration. This supports the stale query mode in case the cluster doesn't have a leader.

func (*HTTPServer) OperatorRaftPeer 

func (s *HTTPServer) OperatorRaftPeer(resp http.ResponseWriter, req *http.Request) (interface{}, error)

OperatorRaftPeer supports actions on Raft peers. Currently we only support removing peers by address.

func (*HTTPServer) OperatorServerHealth 

func (s *HTTPServer) OperatorServerHealth(resp http.ResponseWriter, req *http.Request) (interface{}, error)

OperatorServerHealth is used to get the health of the servers in the local DC

func (*HTTPServer) PreparedQueryGeneral 

func (s *HTTPServer) PreparedQueryGeneral(resp http.ResponseWriter, req *http.Request) (interface{}, error)

PreparedQueryGeneral handles all the general prepared query requests.

func (*HTTPServer) PreparedQuerySpecific 

func (s *HTTPServer) PreparedQuerySpecific(resp http.ResponseWriter, req *http.Request) (interface{}, error)

PreparedQuerySpecific handles all the prepared query requests specific to a particular query.

func (*HTTPServer) SessionCreate 

func (s *HTTPServer) SessionCreate(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionCreate is used to create a new session

func (*HTTPServer) SessionDestroy 

func (s *HTTPServer) SessionDestroy(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionDestroy is used to destroy an existing session

func (*HTTPServer) SessionGet 

func (s *HTTPServer) SessionGet(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionGet is used to get info for a particular session

func (*HTTPServer) SessionList 

func (s *HTTPServer) SessionList(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionList is used to list all the sessions

func (*HTTPServer) SessionRenew 

func (s *HTTPServer) SessionRenew(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionRenew is used to renew the TTL on an existing TTL session

func (*HTTPServer) SessionsForNode 

func (s *HTTPServer) SessionsForNode(resp http.ResponseWriter, req *http.Request) (interface{}, error)

SessionsForNode returns all the nodes belonging to a node

func (*HTTPServer) Snapshot 

func (s *HTTPServer) Snapshot(resp http.ResponseWriter, req *http.Request) (interface{}, error)

Snapshot handles requests to take and restore snapshots. This uses a special mechanism to make the RPC since we potentially stream large amounts of data as part of these requests.

func (*HTTPServer) StatusLeader 

func (s *HTTPServer) StatusLeader(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) StatusPeers 

func (s *HTTPServer) StatusPeers(resp http.ResponseWriter, req *http.Request) (interface{}, error)

func (*HTTPServer) Txn 

func (s *HTTPServer) Txn(resp http.ResponseWriter, req *http.Request) (interface{}, error)

Txn handles requests to apply multiple operations in a single, atomic transaction. A transaction consisting of only read operations will be fast- pathed to an endpoint that supports consistency modes (but not blocking), and everything else will be routed through Raft like a normal write.

func (*HTTPServer) UINodeInfo 

func (s *HTTPServer) UINodeInfo(resp http.ResponseWriter, req *http.Request) (interface{}, error)

UINodeInfo is used to get info on a single node in a given datacenter. We return a NodeInfo which provides overview information for the node

func (*HTTPServer) UINodes 

func (s *HTTPServer) UINodes(resp http.ResponseWriter, req *http.Request) (interface{}, error)

UINodes is used to list the nodes in a given datacenter. We return a NodeDump which provides overview information for all the nodes

func (*HTTPServer) UIServices 

func (s *HTTPServer) UIServices(resp http.ResponseWriter, req *http.Request) (interface{}, error)

UIServices is used to list the services in a given datacenter. We return a ServiceSummary which provides overview information for the service

type Limits added in v0.9.3 

type Limits struct {
	// RPCRate and RPCMaxBurst control how frequently RPC calls are allowed
	// to happen. In any large enough time interval, rate limiter limits the
	// rate to RPCRate tokens per second, with a maximum burst size of
	// RPCMaxBurst events. As a special case, if RPCRate == Inf (the infinite
	// rate), RPCMaxBurst is ignored.
	//
	// See https://en.wikipedia.org/wiki/Token_bucket for more about token
	// buckets.
	RPCRate     rate.Limit `mapstructure:"rpc_rate"`
	RPCMaxBurst int        `mapstructure:"rpc_max_burst"`
}

Limits is used to configure limits enforced by the agent.

type NetworkSegment added in v0.9.3 

type NetworkSegment struct {
	// Name is the name of the segment.
	Name string `mapstructure:"name"`

	// Bind is the bind address for this segment.
	Bind string `mapstructure:"bind"`

	// Port is the port for this segment.
	Port int `mapstructure:"port"`

	// RPCListener is whether to bind a separate RPC listener on the bind address
	// for this segment.
	RPCListener bool `mapstructure:"rpc_listener"`

	// Advertise is the advertise address of this segment.
	Advertise string `mapstructure:"advertise"`
}

(Enterprise-only) NetworkSegment is the configuration for a network segment, which is an isolated serf group on the LAN.

type NotifyGroup 

type NotifyGroup struct {
	// contains filtered or unexported fields
}

NotifyGroup is used to allow a simple notification mechanism. Channels can be marked as waiting, and when notify is invoked, all the waiting channels get a message and are cleared from the notify list.

func (*NotifyGroup) Clear 

func (n *NotifyGroup) Clear(ch chan struct{})

Clear removes a channel from the notify group

func (*NotifyGroup) Notify 

func (n *NotifyGroup) Notify()

Notify will do a non-blocking send to all waiting channels, and clear the notify list

func (*NotifyGroup) Wait 

func (n *NotifyGroup) Wait(ch chan struct{})

Wait adds a channel to the notify group

func (*NotifyGroup) WaitCh 

func (n *NotifyGroup) WaitCh() chan struct{}

WaitCh allocates a channel that is subscribed to notifications

type Performance 

type Performance struct {
	// RaftMultiplier is an integer multiplier used to scale Raft timing
	// parameters: HeartbeatTimeout, ElectionTimeout, and LeaderLeaseTimeout.
	RaftMultiplier uint `mapstructure:"raft_multiplier"`
}

Performance is used to tune the performance of Consul's subsystems.

type PortConfig 

type PortConfig struct {
	DNS     int // DNS Query interface
	HTTP    int // HTTP API
	HTTPS   int // HTTPS API
	SerfLan int `mapstructure:"serf_lan"` // LAN gossip (Client + Server)
	SerfWan int `mapstructure:"serf_wan"` // WAN gossip (Server only)
	Server  int // Server internal RPC

	// RPC is deprecated and is no longer used. It will be removed in a future
	// version.
	RPC int // CLI RPC
}

Ports is used to simplify the configuration by providing default ports, and allowing the addresses to only be specified once

type ProtoAddr 

type ProtoAddr struct {
	Proto, Net, Addr string
}

func (ProtoAddr) String 

func (p ProtoAddr) String() string

type RetryJoinAzure 

type RetryJoinAzure struct {
	// The tag name and value to use when filtering instances
	TagName  string `mapstructure:"tag_name"`
	TagValue string `mapstructure:"tag_value"`

	// The Azure credentials to use for making requests to AzureRM
	SubscriptionID  string `mapstructure:"subscription_id" json:"-"`
	TenantID        string `mapstructure:"tenant_id" json:"-"`
	ClientID        string `mapstructure:"client_id" json:"-"`
	SecretAccessKey string `mapstructure:"secret_access_key" json:"-"`
}

RetryJoinAzure is used to configure discovery of instances via AzureRM API

type RetryJoinEC2 

type RetryJoinEC2 struct {
	// The AWS region to look for instances in
	Region string `mapstructure:"region"`

	// The tag key and value to use when filtering instances
	TagKey   string `mapstructure:"tag_key"`
	TagValue string `mapstructure:"tag_value"`

	// The AWS credentials to use for making requests to EC2
	AccessKeyID     string `mapstructure:"access_key_id" json:"-"`
	SecretAccessKey string `mapstructure:"secret_access_key" json:"-"`
}

RetryJoinEC2 is used to configure discovery of instances via Amazon's EC2 api

type RetryJoinGCE 

type RetryJoinGCE struct {
	// The name of the project the instances reside in.
	ProjectName string `mapstructure:"project_name"`

	// A regular expression (RE2) pattern for the zones you want to discover the instances in.
	// Example: us-west1-.*, or us-(?west|east).*.
	ZonePattern string `mapstructure:"zone_pattern"`

	// The tag value to search for when filtering instances.
	TagValue string `mapstructure:"tag_value"`

	// A path to a JSON file with the service account credentials necessary to
	// connect to GCE. If this is not defined, the following chain is respected:
	// 1. A JSON file whose path is specified by the
	//		GOOGLE_APPLICATION_CREDENTIALS environment variable.
	// 2. A JSON file in a location known to the gcloud command-line tool.
	//    On Windows, this is %APPDATA%/gcloud/application_default_credentials.json.
	//  	On other systems, $HOME/.config/gcloud/application_default_credentials.json.
	// 3. On Google Compute Engine, it fetches credentials from the metadata
	//    server.  (In this final case any provided scopes are ignored.)
	CredentialsFile string `mapstructure:"credentials_file"`
}

RetryJoinGCE is used to configure discovery of instances via Google Compute Engine's API.

type Self 

type Self struct {
	Config *Config
	Coord  *coordinate.Coordinate
	Member serf.Member
	Stats  map[string]map[string]string
	Meta   map[string]string
}

type ServiceSummary 

type ServiceSummary struct {
	Name           string
	Nodes          []string
	ChecksPassing  int
	ChecksWarning  int
	ChecksCritical int
}

ServiceSummary is used to summarize a service

type Telemetry 

type Telemetry struct {
	// StatsiteAddr is the address of a statsite instance. If provided,
	// metrics will be streamed to that instance.
	StatsiteAddr string `mapstructure:"statsite_address"`

	// StatsdAddr is the address of a statsd instance. If provided,
	// metrics will be sent to that instance.
	StatsdAddr string `mapstructure:"statsd_address"`

	// StatsitePrefix is the prefix used to write stats values to. By
	// default this is set to 'consul'.
	StatsitePrefix string `mapstructure:"statsite_prefix"`

	// DisableHostname will disable hostname prefixing for all metrics
	DisableHostname bool `mapstructure:"disable_hostname"`

	// PrefixFilter is a list of filter rules to apply for allowing/blocking metrics
	// by prefix.
	PrefixFilter    []string `mapstructure:"prefix_filter"`
	AllowedPrefixes []string `mapstructure:"-" json:"-"`
	BlockedPrefixes []string `mapstructure:"-" json:"-"`

	// FilterDefault is the default for whether to allow a metric that's not
	// covered by the filter.
	FilterDefault *bool `mapstructure:"filter_default"`

	// DogStatsdAddr is the address of a dogstatsd instance. If provided,
	// metrics will be sent to that instance
	DogStatsdAddr string `mapstructure:"dogstatsd_addr"`

	// DogStatsdTags are the global tags that should be sent with each packet to dogstatsd
	// It is a list of strings, where each string looks like "my_tag_name:my_tag_value"
	DogStatsdTags []string `mapstructure:"dogstatsd_tags"`

	// CirconusAPIToken is a valid API Token used to create/manage check. If provided,
	// metric management is enabled.
	// Default: none
	CirconusAPIToken string `mapstructure:"circonus_api_token" json:"-"`
	// CirconusAPIApp is an app name associated with API token.
	// Default: "consul"
	CirconusAPIApp string `mapstructure:"circonus_api_app"`
	// CirconusAPIURL is the base URL to use for contacting the Circonus API.
	// Default: "https://api.circonus.com/v2"
	CirconusAPIURL string `mapstructure:"circonus_api_url"`
	// CirconusSubmissionInterval is the interval at which metrics are submitted to Circonus.
	// Default: 10s
	CirconusSubmissionInterval string `mapstructure:"circonus_submission_interval"`
	// CirconusCheckSubmissionURL is the check.config.submission_url field from a
	// previously created HTTPTRAP check.
	// Default: none
	CirconusCheckSubmissionURL string `mapstructure:"circonus_submission_url"`
	// CirconusCheckID is the check id (not check bundle id) from a previously created
	// HTTPTRAP check. The numeric portion of the check._cid field.
	// Default: none
	CirconusCheckID string `mapstructure:"circonus_check_id"`
	// CirconusCheckForceMetricActivation will force enabling metrics, as they are encountered,
	// if the metric already exists and is NOT active. If check management is enabled, the default
	// behavior is to add new metrics as they are encoutered. If the metric already exists in the
	// check, it will *NOT* be activated. This setting overrides that behavior.
	// Default: "false"
	CirconusCheckForceMetricActivation string `mapstructure:"circonus_check_force_metric_activation"`
	// CirconusCheckInstanceID serves to uniquely identify the metrics coming from this "instance".
	// It can be used to maintain metric continuity with transient or ephemeral instances as
	// they move around within an infrastructure.
	// Default: hostname:app
	CirconusCheckInstanceID string `mapstructure:"circonus_check_instance_id"`
	// CirconusCheckSearchTag is a special tag which, when coupled with the instance id, helps to
	// narrow down the search results when neither a Submission URL or Check ID is provided.
	// Default: service:app (e.g. service:consul)
	CirconusCheckSearchTag string `mapstructure:"circonus_check_search_tag"`
	// CirconusCheckTags is a comma separated list of tags to apply to the check. Note that
	// the value of CirconusCheckSearchTag will always be added to the check.
	// Default: none
	CirconusCheckTags string `mapstructure:"circonus_check_tags"`
	// CirconusCheckDisplayName is the name for the check which will be displayed in the Circonus UI.
	// Default: value of CirconusCheckInstanceID
	CirconusCheckDisplayName string `mapstructure:"circonus_check_display_name"`
	// CirconusBrokerID is an explicit broker to use when creating a new check. The numeric portion
	// of broker._cid. If metric management is enabled and neither a Submission URL nor Check ID
	// is provided, an attempt will be made to search for an existing check using Instance ID and
	// Search Tag. If one is not found, a new HTTPTRAP check will be created.
	// Default: use Select Tag if provided, otherwise, a random Enterprise Broker associated
	// with the specified API token or the default Circonus Broker.
	// Default: none
	CirconusBrokerID string `mapstructure:"circonus_broker_id"`
	// CirconusBrokerSelectTag is a special tag which will be used to select a broker when
	// a Broker ID is not provided. The best use of this is to as a hint for which broker
	// should be used based on *where* this particular instance is running.
	// (e.g. a specific geo location or datacenter, dc:sfo)
	// Default: none
	CirconusBrokerSelectTag string `mapstructure:"circonus_broker_select_tag"`
}

Telemetry is the telemetry configuration for the server

func (*Telemetry) GoString 

func (s *Telemetry) GoString() string

type TestAgent 

type TestAgent struct {
	// Name is an optional name of the agent.
	Name string

	// Config is the agent configuration. If Config is nil then
	// TestConfig() is used. If Config.DataDir is set then it is
	// the callers responsibility to clean up the data directory.
	// Otherwise, a temporary data directory is created and removed
	// when Shutdown() is called.
	Config *Config

	// LogOutput is the sink for the logs. If nil, logs are written
	// to os.Stderr.
	LogOutput io.Writer

	// LogWriter is used for streaming logs.
	LogWriter *logger.LogWriter

	// DataDir is the data directory which is used when Config.DataDir
	// is not set. It is created automatically and removed when
	// Shutdown() is called.
	DataDir string

	// Key is the optional encryption key for the LAN and WAN keyring.
	Key string

	// NoInitialSync determines whether an anti-entropy run
	// will be scheduled after the agent started.
	NoInitialSync bool

	// Agent is the embedded consul agent.
	// It is valid after Start().
	*Agent
	// contains filtered or unexported fields
}

TestAgent encapsulates an Agent with a default configuration and startup procedure suitable for testing. It panics if there are errors during creation or startup instead of returning errors. It manages a temporary data directory which is removed after shutdown.

func NewTestAgent 

func NewTestAgent(name string, c *Config) *TestAgent

NewTestAgent returns a started agent with the given name and configuration. It panics if the agent could not be started. The caller should call Shutdown() to stop the agent and remove temporary directories.

func (*TestAgent) Client 

func (a *TestAgent) Client() *api.Client

func (*TestAgent) DNSDisableCompression added in v0.9.0 

func (a *TestAgent) DNSDisableCompression(b bool)

DNSDisableCompression disables compression for all started DNS servers.

func (*TestAgent) HTTPAddr 

func (a *TestAgent) HTTPAddr() string

func (*TestAgent) SegmentAddr added in v0.9.3 

func (a *TestAgent) SegmentAddr(name string) string

func (*TestAgent) Shutdown 

func (a *TestAgent) Shutdown() error

Shutdown stops the agent and removes the data directory if it is managed by the test agent.

func (*TestAgent) Start 

func (a *TestAgent) Start() *TestAgent

Start starts a test agent. It panics if the agent could not be started.

type UnixSocketConfig 

type UnixSocketConfig struct {
	UnixSocketPermissions `mapstructure:",squash"`
}

UnixSocketConfig stores information about various unix sockets which Consul creates and uses for communication.

type UnixSocketPermissions 

type UnixSocketPermissions struct {
	Usr   string `mapstructure:"user"`
	Grp   string `mapstructure:"group"`
	Perms string `mapstructure:"mode"`
}

UnixSocketPermissions contains information about a unix socket, and implements the FilePermissions interface.

func (UnixSocketPermissions) Group 

func (u UnixSocketPermissions) Group() string

func (UnixSocketPermissions) Mode 

func (u UnixSocketPermissions) Mode() string

func (UnixSocketPermissions) User 

func (u UnixSocketPermissions) User() string

type UserEvent 

type UserEvent struct {
	// ID of the user event. Automatically generated.
	ID string

	// Name of the event
	Name string `codec:"n"`

	// Optional payload
	Payload []byte `codec:"p,omitempty"`

	// NodeFilter is a regular expression to filter on nodes
	NodeFilter string `codec:"nf,omitempty"`

	// ServiceFilter is a regular expression to filter on services
	ServiceFilter string `codec:"sf,omitempty"`

	// TagFilter is a regular expression to filter on tags of a service,
	// must be provided with ServiceFilter
	TagFilter string `codec:"tf,omitempty"`

	// Version of the user event. Automatically generated.
	Version int `codec:"v"`

	// LTime is the lamport time. Automatically generated.
	LTime uint64 `codec:"-"`
}

UserEventParam is used to parameterize a user event

Source Files

View all Source files

Directories

Path Synopsis
The snapshot endpoint is a special non-RPC endpoint that supports streaming for taking and restoring snapshots for disaster recovery.
 The snapshot endpoint is a special non-RPC endpoint that supports streaming for taking and restoring snapshots for disaster recovery.
prepared_query
state
Package servers provides a Manager interface for Manager managed metadata.Server objects.
 Package servers provides a Manager interface for Manager managed metadata.Server objects.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.