command

Documentation

Index

• Constants
• Variables
• type CMDWrapper

Constants

const (
	DebugCommandPrefix             = "gfsp-cli-debug-"
	DefaultMaxSegmentPieceSize     = 16 * 1024 * 1024
	DefaultRedundantDataChunkNum   = 4
	DefaultRedundantParityChunkNum = 2
)

const (
	MaxRecoveryTime = 50

	MaxRecoveryJob      = 1000
	FullQueueWaitTime   = 5 * time.Second
	RecoveryJobSyncTime = 30 * time.Second
)

const (
	DefaultConfigFile = "./config.toml"
)

const (
	GfSpCliUserName = "gfsp-cli"
)

Variables

var ChallengePieceCmd = &cli.Command{
	Action: CW.challengePieceAction,
	Name:   "challenge.piece",
	Usage:  "Challenge piece integrity hash",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		objectIDFlag,
		redundancyIdxFlag,
		segmentIdxFlag,
	},
	Category:    queryCommands,
	Description: `The challenge.piece command send rpc request to downloader, get integrity meta and check the piece checksums.`,
}

var CompleteSPExitCmd = &cli.Command{
	Name:  "sp.complete.exit",
	Usage: "Only used in debugging scenarios, online use not allowed. Used for sp complete exits from the Greenfield storage network.",
	Description: `Using this command, it will send an transaction to Greenfield blockchain to tell this SP is prepared ` +
		`to complete exit from Greenfield storage network.`,
	Category: migrateCommands,
	Action:   CW.completeSPExit,
	Flags: []cli.Flag{
		spOperatorAddressFlag,
	},
}

var CompleteSwapOutCmd = &cli.Command{
	Name:  "sp.complete.swapout",
	Usage: "Only used in debugging scenarios, online use not allowed. Used for swap out from the Greenfield storage network.",
	Description: `Using this command, it will send an transaction to Greenfield blockchain to tell this SP is prepared ` +
		`to swap out from Greenfield storage network.`,
	Category: migrateCommands,
	Action:   CW.completeSwapOut,
	Flags: []cli.Flag{
		spOperatorAddressFlag,
		swapOutFamilyID,
		swapOutGVGIDList,
	},
}

var ConfigDumpCmd = &cli.Command{
	Action:      dumpConfigAction,
	Name:        "config.dump",
	Usage:       "Dump default configuration to the './config.toml' file for editing",
	Category:    "CONFIG COMMANDS",
	Description: `The config.dump command writes default configuration values to ./config.toml file for editing.`,
}

ConfigDumpCmd is used to dump default config.toml template.

var DebugCreateBucketApprovalCmd = &cli.Command{
	Action: CW.createBucketApproval,
	Name:   "debug.create.bucket.approval",
	Usage:  "Create random CreateBucketApproval and send to approver for debugging and testing",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
	},
	Category: debugCommands,
	Description: `The debug.create.bucket.approval command create a random CreateBucketApproval request and send it ` +
		`to approver for debugging and testing the approver on Dev Env.`,
}

var DebugCreateObjectApprovalCmd = &cli.Command{
	Action: CW.createObjectApproval,
	Name:   "debug.create.object.approval",
	Usage:  "Create random CreateObjectApproval and send to approver for debugging and testing",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
	},
	Category: debugCommands,
	Description: `The debug.create.object.approval command create a random CreateObjectApproval request and send it ` +
		`to approver for debugging and testing the approver on Dev Env.`,
}

var DebugPutObjectCmd = &cli.Command{
	Action: CW.putObjectAction,
	Name:   "debug.put.object",
	Usage:  "Create random ObjectInfo and send to uploader for debugging and testing uploading primary sp",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		fileFlag,
	},
	Category: debugCommands,
	Description: `The debug.put.object command create a random ObjectInfo and send it to uploader for debugging and ` +
		`testing upload primary sp on Dev Env.`,
}

var DebugReplicateApprovalCmd = &cli.Command{
	Action: CW.replicatePieceApprovalAction,
	Name:   "debug.replicate.approval",
	Usage:  "Create random ObjectInfo and send to p2p for debugging and testing p2p protocol network",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		numberFlag,
	},
	Category: debugCommands,
	Description: `The debug.ask.replicate.approval command create a random ObjectInfo and send it to p2p node for ` +
		`debugging and testing p2p protocol network on Dev Env.`,
}

var GetObjectCmd = &cli.Command{
	Action: CW.getObjectAction,
	Name:   "get.object",
	Usage:  "Get object payload data",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		objectIDFlag,
	},
	Category:    queryCommands,
	Description: `The get.object command send rpc request to downloader server to get object payload data.`,
}

var GetSegmentIntegrityCmd = &cli.Command{
	Action: CW.getSegmentIntegrityAction,
	Name:   "get.piece.integrity",
	Usage:  "Get piece integrity hash and signature",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		objectIDFlag,
	},
	Category:    queryCommands,
	Description: `The get.segment.integrity command send rpc request to spdb, get integrity hash and signature.`,
}

var ListErrorsCmd = &cli.Command{
	Action:      listErrorsAction,
	Name:        "list.errors",
	Usage:       "List the predefine errors in greenfield storage provider",
	Category:    queryCommands,
	Description: `The list command output the services in greenfield storage provider.`,
}

var ListModulesCmd = &cli.Command{
	Action:      listModulesAction,
	Name:        "list.modules",
	Usage:       "List the modules in greenfield storage provider",
	Category:    queryCommands,
	Description: `The list command output the services in greenfield storage provider.`,
}

var P2PCreateKeysCmd = &cli.Command{
	Action: p2pCreateKeysAction,
	Name:   "p2p.create.key",
	Usage:  "Create Secp256k1 key pairs for encrypting p2p protocol msg and identifying p2p node",
	Flags: []cli.Flag{
		numberFlag,
	},
	Category: "P2P COMMANDS",
	Description: `The p2p.create.key creates 'n' sets of Secp256k1 key pairs, each key pair contains a private key and ` +
		`a node id, the private key is used to encrypt p2p protocol msg, and the node id is use to public to other p2p ` +
		`nodes for communication by p2p protocol.`,
}

var QueryBucketMigrateCmd = &cli.Command{
	Action: CW.getBucketMigrateAction,
	Name:   "query.bucket.migrate",
	Usage:  "Query bucket migrate plan and status",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		endpointFlag,
	},
	Category:    queryCommands,
	Description: `The query.bucket.migrate command send rpc request to manager get plan and status.`,
}

var QueryPrimarySPIncomeCmd = &cli.Command{
	Action: CW.getPrimarySPIncomeAction,
	Name:   "query.primary.sp.income",
	Usage:  "Query primary sp income details",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		spIDFlag,
	},
	Category:    queryCommands,
	Description: `The query.primary.sp.income command send rpc request to metadata, get the primary sp incomes details for the current timestamp`,
}

var QuerySPExitCmd = &cli.Command{
	Action: CW.getSPExitAction,
	Name:   "query.sp.exit",
	Usage:  "Query sp exit swap plan and migrate gvg task status",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		endpointFlag,
	},
	Category:    queryCommands,
	Description: `The query.sp.exit command send rpc request to manager, get sp exit swap plan and migrate gvg task status.`,
}

var QuerySecondarySPIncomeCmd = &cli.Command{
	Action: CW.getSecondarySPIncomeAction,
	Name:   "query.secondary.sp.income",
	Usage:  "Query secondary sp income details",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		spIDFlag,
	},
	Category:    queryCommands,
	Description: `The query.secondary.sp.income command send rpc request to metadata, get the secondary sp incomes details for the current timestamp`,
}

var QueryTaskCmd = &cli.Command{
	Action:   CW.queryTasksAction,
	Name:     "query.task",
	Usage:    "Query running tasks in modules by task sub key",
	Category: queryCommands,
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		endpointFlag,
		keyFlag,
	},
	Description: `Query running tasks in modules by task sub key, show the tasks that task key contains the inout key detail info`,
}

var RecoverObjectCmd = &cli.Command{
	Action: recoverObjectAction,
	Name:   "recover.object",
	Usage:  "Generate recover piece data tasks to recover the object data",

	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		bucketFlag,
		objectFlag,
		objectListFlag,
	},
	Category:    recoveryCommands,
	Description: `The recover.object command is used to recover the object data on the primarySP or the secondary SP.`,
}

var RecoverPieceCmd = &cli.Command{
	Action: recoverPieceAction,
	Name:   "recover.piece",
	Usage:  "Generate recover piece data task to recover the object piece",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		bucketFlag,
		objectFlag,
		segmentIdxFlag,
	},
	Category:    recoveryCommands,
	Description: `The recover.piece command is used to recover the object piece data on the primarySP or the secondary SP.`,
}

var SPExitCmd = &cli.Command{
	Name:  "sp.exit",
	Usage: "Used for sp exits from the Greenfield storage network",
	Description: `Using this command, it will send an transaction to Greenfield blockchain to tell this SP is prepared ` +
		`to exit from Greenfield storage network.`,
	Category: migrateCommands,
	Action:   CW.spExit,
	Flags: []cli.Flag{
		spOperatorAddressFlag,
	},
}

var SetQuotaCmd = &cli.Command{
	Action: updateFreeQuotaAction,
	Name:   "update.quota",
	Usage:  "Update the free quota of the SP",
	Flags: []cli.Flag{
		utils.ConfigFileFlag,
		freeQuotaFlag,
	},
	Category: "QUOTA COMMANDS",
	Description: `The update.quota command is used to update the free quota of the SP on greenfield chain, it will ` +
		`send a txn to the chain to finish the updating.`,
}

Types

type CMDWrapper

type CMDWrapper struct {
	// contains filtered or unexported fields
}

CMDWrapper defines cmd wrapper.

var CW CMDWrapper