awsroute53

package
v2.56.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 21, 2022 License: Apache-2.0 Imports: 9 Imported by: 35

README

Amazon Route53 Construct Library

To add a public hosted zone:

route53.NewPublicHostedZone(this, jsii.String("HostedZone"), &publicHostedZoneProps{
	zoneName: jsii.String("fully.qualified.domain.com"),
})

To add a private hosted zone, use PrivateHostedZone. Note that enableDnsHostnames and enableDnsSupport must have been enabled for the VPC you're configuring for private hosted zones.

var vpc vpc


zone := route53.NewPrivateHostedZone(this, jsii.String("HostedZone"), &privateHostedZoneProps{
	zoneName: jsii.String("fully.qualified.domain.com"),
	vpc: vpc,
})

Additional VPCs can be added with zone.addVpc().

Adding Records

To add a TXT record to your zone:

var myZone hostedZone


route53.NewTxtRecord(this, jsii.String("TXTRecord"), &txtRecordProps{
	zone: myZone,
	recordName: jsii.String("_foo"),
	 // If the name ends with a ".", it will be used as-is;
	// if it ends with a "." followed by the zone name, a trailing "." will be added automatically;
	// otherwise, a ".", the zone name, and a trailing "." will be added automatically.
	// Defaults to zone root if not specified.
	values: []*string{
		jsii.String("Bar!"),
		jsii.String("Baz?"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

To add a NS record to your zone:

var myZone hostedZone


route53.NewNsRecord(this, jsii.String("NSRecord"), &nsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("ns-1.awsdns.co.uk."),
		jsii.String("ns-2.awsdns.com."),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

To add a DS record to your zone:

var myZone hostedZone


route53.NewDsRecord(this, jsii.String("DSRecord"), &dsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("12345 3 1 123456789abcdef67890123456789abcdef67890"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

To add an A record to your zone:

var myZone hostedZone


route53.NewARecord(this, jsii.String("ARecord"), &aRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromIpAddresses(jsii.String("1.2.3.4"), jsii.String("5.6.7.8")),
})

To add an A record for an EC2 instance with an Elastic IP (EIP) to your zone:

var instance instance

var myZone hostedZone


elasticIp := ec2.NewCfnEIP(this, jsii.String("EIP"), &cfnEIPProps{
	domain: jsii.String("vpc"),
	instanceId: instance.instanceId,
})
route53.NewARecord(this, jsii.String("ARecord"), &aRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromIpAddresses(elasticIp.ref),
})

To add an AAAA record pointing to a CloudFront distribution:

import cloudfront "github.com/aws/aws-cdk-go/awscdk"

var myZone hostedZone
var distribution cloudFrontWebDistribution

route53.NewAaaaRecord(this, jsii.String("Alias"), &aaaaRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromAlias(targets.NewCloudFrontTarget(distribution)),
})

Constructs are available for A, AAAA, CAA, CNAME, MX, NS, SRV and TXT records.

Use the CaaAmazonRecord construct to easily restrict certificate authorities allowed to issue certificates for a domain to Amazon only.

Working with existing record sets

Use the deleteExisting prop to delete an existing record set before deploying the new one. This is useful if you want to minimize downtime and avoid "manual" actions while deploying a stack with a record set that already exists. This is typically the case for record sets that are not already "owned" by CloudFormation or "owned" by another stack or construct that is going to be deleted (migration).

var myZone hostedZone


route53.NewARecord(this, jsii.String("ARecord"), &aRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromIpAddresses(jsii.String("1.2.3.4"), jsii.String("5.6.7.8")),
	deleteExisting: jsii.Boolean(true),
})
Cross Account Zone Delegation

To add a NS record to a HostedZone in different account you can do the following:

In the account containing the parent hosted zone:

parentZone := route53.NewPublicHostedZone(this, jsii.String("HostedZone"), &publicHostedZoneProps{
	zoneName: jsii.String("someexample.com"),
	crossAccountZoneDelegationPrincipal: iam.NewAccountPrincipal(jsii.String("12345678901")),
	crossAccountZoneDelegationRoleName: jsii.String("MyDelegationRole"),
})

In the account containing the child zone to be delegated:

subZone := route53.NewPublicHostedZone(this, jsii.String("SubZone"), &publicHostedZoneProps{
	zoneName: jsii.String("sub.someexample.com"),
})

// import the delegation role by constructing the roleArn
delegationRoleArn := awscdk.stack.of(this).formatArn(&arnComponents{
	region: jsii.String(""),
	 // IAM is global in each partition
	service: jsii.String("iam"),
	account: jsii.String("parent-account-id"),
	resource: jsii.String("role"),
	resourceName: jsii.String("MyDelegationRole"),
})
delegationRole := iam.role.fromRoleArn(this, jsii.String("DelegationRole"), delegationRoleArn)

// create the record
// create the record
route53.NewCrossAccountZoneDelegationRecord(this, jsii.String("delegate"), &crossAccountZoneDelegationRecordProps{
	delegatedZone: subZone,
	parentHostedZoneName: jsii.String("someexample.com"),
	 // or you can use parentHostedZoneId
	delegationRole: delegationRole,
})

Imports

If you don't know the ID of the Hosted Zone to import, you can use the HostedZone.fromLookup:

route53.hostedZone.fromLookup(this, jsii.String("MyZone"), &hostedZoneProviderProps{
	domainName: jsii.String("example.com"),
})

HostedZone.fromLookup requires an environment to be configured. Check out the documentation for more documentation and examples. CDK automatically looks into your ~/.aws/config file for the [default] profile. If you want to specify a different account run cdk deploy --profile [profile].

new MyDevStack(app, 'dev', {
  env: {
    account: process.env.CDK_DEFAULT_ACCOUNT,
    region: process.env.CDK_DEFAULT_REGION,
  },
});

If you know the ID and Name of a Hosted Zone, you can import it directly:

zone := route53.hostedZone.fromHostedZoneAttributes(this, jsii.String("MyZone"), &hostedZoneAttributes{
	zoneName: jsii.String("example.com"),
	hostedZoneId: jsii.String("ZOJJZC49E0EPZ"),
})

Alternatively, use the HostedZone.fromHostedZoneId to import hosted zones if you know the ID and the retrieval for the zoneName is undesirable.

zone := route53.hostedZone.fromHostedZoneId(this, jsii.String("MyZone"), jsii.String("ZOJJZC49E0EPZ"))

You can import a Public Hosted Zone as well with the similar PublicHostedZone.fromPublicHostedZoneId and PublicHostedZone.fromPublicHostedZoneAttributes methods:

zoneFromAttributes := route53.publicHostedZone.fromPublicHostedZoneAttributes(this, jsii.String("MyZone"), &publicHostedZoneAttributes{
	zoneName: jsii.String("example.com"),
	hostedZoneId: jsii.String("ZOJJZC49E0EPZ"),
})

// Does not know zoneName
zoneFromId := route53.publicHostedZone.fromPublicHostedZoneId(this, jsii.String("MyZone"), jsii.String("ZOJJZC49E0EPZ"))

VPC Endpoint Service Private DNS

When you create a VPC endpoint service, AWS generates endpoint-specific DNS hostnames that consumers use to communicate with the service. For example, vpce-1234-abcdev-us-east-1.vpce-svc-123345.us-east-1.vpce.amazonaws.com. By default, your consumers access the service with that DNS name. This can cause problems with HTTPS traffic because the DNS will not match the backend certificate:

curl: (60) SSL: no alternative certificate subject name matches target host name 'vpce-abcdefghijklmnopq-rstuvwx.vpce-svc-abcdefghijklmnopq.us-east-1.vpce.amazonaws.com'

Effectively, the endpoint appears untrustworthy. To mitigate this, clients have to create an alias for this DNS name in Route53.

Private DNS for an endpoint service lets you configure a private DNS name so consumers can access the service using an existing DNS name without creating this Route53 DNS alias This DNS name can also be guaranteed to match up with the backend certificate.

Before consumers can use the private DNS name, you must verify that you have control of the domain/subdomain.

Assuming your account has ownership of the particular domain/subdomain, this construct sets up the private DNS configuration on the endpoint service, creates all the necessary Route53 entries, and verifies domain ownership.

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

stack := awscdk.NewStack()
vpc := awscdk.NewVpc(stack, jsii.String("VPC"))
nlb := awscdk.NewNetworkLoadBalancer(stack, jsii.String("NLB"), &networkLoadBalancerProps{
	vpc: vpc,
})
vpces := awscdk.NewVpcEndpointService(stack, jsii.String("VPCES"), &vpcEndpointServiceProps{
	vpcEndpointServiceLoadBalancers: []iVpcEndpointServiceLoadBalancer{
		nlb,
	},
})
// You must use a public hosted zone so domain ownership can be verified
zone := awscdk.NewPublicHostedZone(stack, jsii.String("PHZ"), &publicHostedZoneProps{
	zoneName: jsii.String("aws-cdk.dev"),
})
awscdk.NewVpcEndpointServiceDomainName(stack, jsii.String("EndpointDomain"), &vpcEndpointServiceDomainNameProps{
	endpointService: vpces,
	domainName: jsii.String("my-stuff.aws-cdk.dev"),
	publicHostedZone: zone,
})

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func ARecord_IsConstruct 

func ARecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func ARecord_IsOwnedResource added in v2.32.0 

func ARecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func ARecord_IsResource 

func ARecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func AaaaRecord_IsConstruct 

func AaaaRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func AaaaRecord_IsOwnedResource added in v2.32.0 

func AaaaRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func AaaaRecord_IsResource 

func AaaaRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func CaaAmazonRecord_IsConstruct 

func CaaAmazonRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CaaAmazonRecord_IsOwnedResource added in v2.32.0 

func CaaAmazonRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func CaaAmazonRecord_IsResource 

func CaaAmazonRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func CaaRecord_IsConstruct 

func CaaRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CaaRecord_IsOwnedResource added in v2.32.0 

func CaaRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func CaaRecord_IsResource 

func CaaRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func CfnCidrCollection_CFN_RESOURCE_TYPE_NAME added in v2.31.0 

func CfnCidrCollection_CFN_RESOURCE_TYPE_NAME() *string

func CfnCidrCollection_IsCfnElement added in v2.31.0 

func CfnCidrCollection_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnCidrCollection_IsCfnResource added in v2.31.0 

func CfnCidrCollection_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnCidrCollection_IsConstruct added in v2.31.0 

func CfnCidrCollection_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnDNSSEC_CFN_RESOURCE_TYPE_NAME 

func CfnDNSSEC_CFN_RESOURCE_TYPE_NAME() *string

func CfnDNSSEC_IsCfnElement 

func CfnDNSSEC_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnDNSSEC_IsCfnResource 

func CfnDNSSEC_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnDNSSEC_IsConstruct 

func CfnDNSSEC_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnHealthCheck_CFN_RESOURCE_TYPE_NAME 

func CfnHealthCheck_CFN_RESOURCE_TYPE_NAME() *string

func CfnHealthCheck_IsCfnElement 

func CfnHealthCheck_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnHealthCheck_IsCfnResource 

func CfnHealthCheck_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnHealthCheck_IsConstruct 

func CfnHealthCheck_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnHostedZone_CFN_RESOURCE_TYPE_NAME 

func CfnHostedZone_CFN_RESOURCE_TYPE_NAME() *string

func CfnHostedZone_IsCfnElement 

func CfnHostedZone_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnHostedZone_IsCfnResource 

func CfnHostedZone_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnHostedZone_IsConstruct 

func CfnHostedZone_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnKeySigningKey_CFN_RESOURCE_TYPE_NAME 

func CfnKeySigningKey_CFN_RESOURCE_TYPE_NAME() *string

func CfnKeySigningKey_IsCfnElement 

func CfnKeySigningKey_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnKeySigningKey_IsCfnResource 

func CfnKeySigningKey_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnKeySigningKey_IsConstruct 

func CfnKeySigningKey_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnRecordSetGroup_CFN_RESOURCE_TYPE_NAME 

func CfnRecordSetGroup_CFN_RESOURCE_TYPE_NAME() *string

func CfnRecordSetGroup_IsCfnElement 

func CfnRecordSetGroup_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnRecordSetGroup_IsCfnResource 

func CfnRecordSetGroup_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnRecordSetGroup_IsConstruct 

func CfnRecordSetGroup_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CfnRecordSet_CFN_RESOURCE_TYPE_NAME 

func CfnRecordSet_CFN_RESOURCE_TYPE_NAME() *string

func CfnRecordSet_IsCfnElement 

func CfnRecordSet_IsCfnElement(x interface{}) *bool

Returns `true` if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of `instanceof` to allow stack elements from different versions of this library to be included in the same stack.

Returns: The construct as a stack element or undefined if it is not a stack element.

func CfnRecordSet_IsCfnResource 

func CfnRecordSet_IsCfnResource(construct constructs.IConstruct) *bool

Check whether the given construct is a CfnResource.

func CfnRecordSet_IsConstruct 

func CfnRecordSet_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CnameRecord_IsConstruct 

func CnameRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func CnameRecord_IsOwnedResource added in v2.32.0 

func CnameRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func CnameRecord_IsResource 

func CnameRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func CrossAccountZoneDelegationRecord_IsConstruct 

func CrossAccountZoneDelegationRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func DsRecord_IsConstruct 

func DsRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func DsRecord_IsOwnedResource added in v2.32.0 

func DsRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func DsRecord_IsResource 

func DsRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func HostedZone_IsConstruct 

func HostedZone_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func HostedZone_IsOwnedResource added in v2.32.0 

func HostedZone_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func HostedZone_IsResource 

func HostedZone_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func MxRecord_IsConstruct 

func MxRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func MxRecord_IsOwnedResource added in v2.32.0 

func MxRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func MxRecord_IsResource 

func MxRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func NewARecord_Override 

func NewARecord_Override(a ARecord, scope constructs.Construct, id *string, props *ARecordProps)

func NewAaaaRecord_Override 

func NewAaaaRecord_Override(a AaaaRecord, scope constructs.Construct, id *string, props *AaaaRecordProps)

func NewCaaAmazonRecord_Override 

func NewCaaAmazonRecord_Override(c CaaAmazonRecord, scope constructs.Construct, id *string, props *CaaAmazonRecordProps)

func NewCaaRecord_Override 

func NewCaaRecord_Override(c CaaRecord, scope constructs.Construct, id *string, props *CaaRecordProps)

func NewCfnCidrCollection_Override added in v2.31.0 

func NewCfnCidrCollection_Override(c CfnCidrCollection, scope constructs.Construct, id *string, props *CfnCidrCollectionProps)

Create a new `AWS::Route53::CidrCollection`.

func NewCfnDNSSEC_Override 

func NewCfnDNSSEC_Override(c CfnDNSSEC, scope constructs.Construct, id *string, props *CfnDNSSECProps)

Create a new `AWS::Route53::DNSSEC`.

func NewCfnHealthCheck_Override 

func NewCfnHealthCheck_Override(c CfnHealthCheck, scope constructs.Construct, id *string, props *CfnHealthCheckProps)

Create a new `AWS::Route53::HealthCheck`.

func NewCfnHostedZone_Override 

func NewCfnHostedZone_Override(c CfnHostedZone, scope constructs.Construct, id *string, props *CfnHostedZoneProps)

Create a new `AWS::Route53::HostedZone`.

func NewCfnKeySigningKey_Override 

func NewCfnKeySigningKey_Override(c CfnKeySigningKey, scope constructs.Construct, id *string, props *CfnKeySigningKeyProps)

Create a new `AWS::Route53::KeySigningKey`.

func NewCfnRecordSetGroup_Override 

func NewCfnRecordSetGroup_Override(c CfnRecordSetGroup, scope constructs.Construct, id *string, props *CfnRecordSetGroupProps)

Create a new `AWS::Route53::RecordSetGroup`.

func NewCfnRecordSet_Override 

func NewCfnRecordSet_Override(c CfnRecordSet, scope constructs.Construct, id *string, props *CfnRecordSetProps)

Create a new `AWS::Route53::RecordSet`.

func NewCnameRecord_Override 

func NewCnameRecord_Override(c CnameRecord, scope constructs.Construct, id *string, props *CnameRecordProps)

func NewCrossAccountZoneDelegationRecord_Override 

func NewCrossAccountZoneDelegationRecord_Override(c CrossAccountZoneDelegationRecord, scope constructs.Construct, id *string, props *CrossAccountZoneDelegationRecordProps)

func NewDsRecord_Override 

func NewDsRecord_Override(d DsRecord, scope constructs.Construct, id *string, props *DsRecordProps)

func NewHostedZone_Override 

func NewHostedZone_Override(h HostedZone, scope constructs.Construct, id *string, props *HostedZoneProps)

func NewMxRecord_Override 

func NewMxRecord_Override(m MxRecord, scope constructs.Construct, id *string, props *MxRecordProps)

func NewNsRecord_Override 

func NewNsRecord_Override(n NsRecord, scope constructs.Construct, id *string, props *NsRecordProps)

func NewPrivateHostedZone_Override 

func NewPrivateHostedZone_Override(p PrivateHostedZone, scope constructs.Construct, id *string, props *PrivateHostedZoneProps)

func NewPublicHostedZone_Override 

func NewPublicHostedZone_Override(p PublicHostedZone, scope constructs.Construct, id *string, props *PublicHostedZoneProps)

func NewRecordSet_Override 

func NewRecordSet_Override(r RecordSet, scope constructs.Construct, id *string, props *RecordSetProps)

func NewRecordTarget_Override 

func NewRecordTarget_Override(r RecordTarget, values *[]*string, aliasTarget IAliasRecordTarget)

func NewSrvRecord_Override 

func NewSrvRecord_Override(s SrvRecord, scope constructs.Construct, id *string, props *SrvRecordProps)

func NewTxtRecord_Override 

func NewTxtRecord_Override(t TxtRecord, scope constructs.Construct, id *string, props *TxtRecordProps)

func NewVpcEndpointServiceDomainName_Override 

func NewVpcEndpointServiceDomainName_Override(v VpcEndpointServiceDomainName, scope constructs.Construct, id *string, props *VpcEndpointServiceDomainNameProps)

func NewZoneDelegationRecord_Override 

func NewZoneDelegationRecord_Override(z ZoneDelegationRecord, scope constructs.Construct, id *string, props *ZoneDelegationRecordProps)

func NsRecord_IsConstruct 

func NsRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func NsRecord_IsOwnedResource added in v2.32.0 

func NsRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func NsRecord_IsResource 

func NsRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func PrivateHostedZone_IsConstruct 

func PrivateHostedZone_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func PrivateHostedZone_IsOwnedResource added in v2.32.0 

func PrivateHostedZone_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func PrivateHostedZone_IsResource 

func PrivateHostedZone_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func PublicHostedZone_IsConstruct 

func PublicHostedZone_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func PublicHostedZone_IsOwnedResource added in v2.32.0 

func PublicHostedZone_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func PublicHostedZone_IsResource 

func PublicHostedZone_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func RecordSet_IsConstruct 

func RecordSet_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func RecordSet_IsOwnedResource added in v2.32.0 

func RecordSet_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func RecordSet_IsResource 

func RecordSet_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func SrvRecord_IsConstruct 

func SrvRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func SrvRecord_IsOwnedResource added in v2.32.0 

func SrvRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func SrvRecord_IsResource 

func SrvRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func TxtRecord_IsConstruct 

func TxtRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func TxtRecord_IsOwnedResource added in v2.32.0 

func TxtRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func TxtRecord_IsResource 

func TxtRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

func VpcEndpointServiceDomainName_IsConstruct 

func VpcEndpointServiceDomainName_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func ZoneDelegationRecord_IsConstruct 

func ZoneDelegationRecord_IsConstruct(x interface{}) *bool

Checks if `x` is a construct.

Use this method instead of `instanceof` to properly detect `Construct` instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the `constructs` library on disk are seen as independent, completely different libraries. As a consequence, the class `Construct` in each copy of the `constructs` library is seen as a different class, and an instance of one class will not test as `instanceof` the other class. `npm install` will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the `constructs` library can be accidentally installed, and `instanceof` will behave unpredictably. It is safest to avoid using `instanceof`, and using this type-testing method instead.

Returns: true if `x` is an object created from a class which extends `Construct`.

func ZoneDelegationRecord_IsOwnedResource added in v2.32.0 

func ZoneDelegationRecord_IsOwnedResource(construct constructs.IConstruct) *bool

Returns true if the construct was created by CDK, and false otherwise.

func ZoneDelegationRecord_IsResource 

func ZoneDelegationRecord_IsResource(construct constructs.IConstruct) *bool

Check whether the given construct is a Resource.

Types

type ARecord 

type ARecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS A record.

Example: 

import apigw "github.com/aws/aws-cdk-go/awscdk"

var zone hostedZone
var restApi lambdaRestApi

route53.NewARecord(this, jsii.String("AliasRecord"), &aRecordProps{
	zone: zone,
	target: route53.recordTarget.fromAlias(targets.NewApiGateway(restApi)),
})

func NewARecord 

func NewARecord(scope constructs.Construct, id *string, props *ARecordProps) ARecord

type ARecordProps 

type ARecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The target.
	Target RecordTarget `field:"required" json:"target" yaml:"target"`
}

Construction properties for a ARecord.

Example: 

import apigw "github.com/aws/aws-cdk-go/awscdk"

var zone hostedZone
var restApi lambdaRestApi

route53.NewARecord(this, jsii.String("AliasRecord"), &aRecordProps{
	zone: zone,
	target: route53.recordTarget.fromAlias(targets.NewApiGateway(restApi)),
})

type AaaaRecord 

type AaaaRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS AAAA record.

Example: 

import cloudfront "github.com/aws/aws-cdk-go/awscdk"

var myZone hostedZone
var distribution cloudFrontWebDistribution

route53.NewAaaaRecord(this, jsii.String("Alias"), &aaaaRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromAlias(targets.NewCloudFrontTarget(distribution)),
})

func NewAaaaRecord 

func NewAaaaRecord(scope constructs.Construct, id *string, props *AaaaRecordProps) AaaaRecord

type AaaaRecordProps 

type AaaaRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The target.
	Target RecordTarget `field:"required" json:"target" yaml:"target"`
}

Construction properties for a AaaaRecord.

Example: 

import cloudfront "github.com/aws/aws-cdk-go/awscdk"

var myZone hostedZone
var distribution cloudFrontWebDistribution

route53.NewAaaaRecord(this, jsii.String("Alias"), &aaaaRecordProps{
	zone: myZone,
	target: route53.recordTarget.fromAlias(targets.NewCloudFrontTarget(distribution)),
})

type AliasRecordTargetConfig 

type AliasRecordTargetConfig struct {
	// DNS name of the target.
	DnsName *string `field:"required" json:"dnsName" yaml:"dnsName"`
	// Hosted zone ID of the target.
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
}

Represents the properties of an alias target destination.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

aliasRecordTargetConfig := &aliasRecordTargetConfig{
	dnsName: jsii.String("dnsName"),
	hostedZoneId: jsii.String("hostedZoneId"),
}

type CaaAmazonRecord 

type CaaAmazonRecord interface {
	CaaRecord
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS Amazon CAA record.

A CAA record to restrict certificate authorities allowed to issue certificates for a domain to Amazon only.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

caaAmazonRecord := awscdk.Aws_route53.NewCaaAmazonRecord(this, jsii.String("MyCaaAmazonRecord"), &caaAmazonRecordProps{
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewCaaAmazonRecord 

func NewCaaAmazonRecord(scope constructs.Construct, id *string, props *CaaAmazonRecordProps) CaaAmazonRecord

type CaaAmazonRecordProps 

type CaaAmazonRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
}

Construction properties for a CaaAmazonRecord.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

caaAmazonRecordProps := &caaAmazonRecordProps{
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type CaaRecord 

type CaaRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS CAA record.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

caaRecord := awscdk.Aws_route53.NewCaaRecord(this, jsii.String("MyCaaRecord"), &caaRecordProps{
	values: []caaRecordValue{
		&caaRecordValue{
			flag: jsii.Number(123),
			tag: awscdk.*Aws_route53.caaTag_ISSUE,
			value: jsii.String("value"),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewCaaRecord 

func NewCaaRecord(scope constructs.Construct, id *string, props *CaaRecordProps) CaaRecord

type CaaRecordProps 

type CaaRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The values.
	Values *[]*CaaRecordValue `field:"required" json:"values" yaml:"values"`
}

Construction properties for a CaaRecord.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

caaRecordProps := &caaRecordProps{
	values: []caaRecordValue{
		&caaRecordValue{
			flag: jsii.Number(123),
			tag: awscdk.Aws_route53.caaTag_ISSUE,
			value: jsii.String("value"),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type CaaRecordValue 

type CaaRecordValue struct {
	// The flag.
	Flag *float64 `field:"required" json:"flag" yaml:"flag"`
	// The tag.
	Tag CaaTag `field:"required" json:"tag" yaml:"tag"`
	// The value associated with the tag.
	Value *string `field:"required" json:"value" yaml:"value"`
}

Properties for a CAA record value.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

caaRecordValue := &caaRecordValue{
	flag: jsii.Number(123),
	tag: awscdk.Aws_route53.caaTag_ISSUE,
	value: jsii.String("value"),
}

type CaaTag 

type CaaTag string

The CAA tag. 

const (
	// Explicity authorizes a single certificate authority to issue a certificate (any type) for the hostname.
	CaaTag_ISSUE CaaTag = "ISSUE"
	// Explicity authorizes a single certificate authority to issue a wildcard certificate (and only wildcard) for the hostname.
	CaaTag_ISSUEWILD CaaTag = "ISSUEWILD"
	// Specifies a URL to which a certificate authority may report policy violations.
	CaaTag_IODEF CaaTag = "IODEF"
)

type CfnCidrCollection added in v2.31.0 

type CfnCidrCollection interface {
	awscdk.CfnResource
	awscdk.IInspectable
	AttrArn() *string
	AttrId() *string
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// `AWS::Route53::CidrCollection.Locations`.
	Locations() interface{}
	SetLocations(val interface{})
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// `AWS::Route53::CidrCollection.Name`.
	Name() *string
	SetName(val *string)
	// The tree node.
	Node() constructs.Node
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::CidrCollection`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnCidrCollection := awscdk.Aws_route53.NewCfnCidrCollection(this, jsii.String("MyCfnCidrCollection"), &cfnCidrCollectionProps{
	name: jsii.String("name"),

	// the properties below are optional
	locations: []interface{}{
		&locationProperty{
			cidrList: []*string{
				jsii.String("cidrList"),
			},
			locationName: jsii.String("locationName"),
		},
	},
})

func NewCfnCidrCollection added in v2.31.0 

func NewCfnCidrCollection(scope constructs.Construct, id *string, props *CfnCidrCollectionProps) CfnCidrCollection

Create a new `AWS::Route53::CidrCollection`.

type CfnCidrCollectionProps added in v2.31.0 

type CfnCidrCollectionProps struct {
	// `AWS::Route53::CidrCollection.Name`.
	Name *string `field:"required" json:"name" yaml:"name"`
	// `AWS::Route53::CidrCollection.Locations`.
	Locations interface{} `field:"optional" json:"locations" yaml:"locations"`
}

Properties for defining a `CfnCidrCollection`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnCidrCollectionProps := &cfnCidrCollectionProps{
	name: jsii.String("name"),

	// the properties below are optional
	locations: []interface{}{
		&locationProperty{
			cidrList: []*string{
				jsii.String("cidrList"),
			},
			locationName: jsii.String("locationName"),
		},
	},
}

type CfnCidrCollection_LocationProperty added in v2.31.0 

type CfnCidrCollection_LocationProperty struct {
	// `CfnCidrCollection.LocationProperty.CidrList`.
	CidrList *[]*string `field:"required" json:"cidrList" yaml:"cidrList"`
	// `CfnCidrCollection.LocationProperty.LocationName`.
	LocationName *string `field:"required" json:"locationName" yaml:"locationName"`
}

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

locationProperty := &locationProperty{
	cidrList: []*string{
		jsii.String("cidrList"),
	},
	locationName: jsii.String("locationName"),
}

type CfnDNSSEC 

type CfnDNSSEC interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// A unique string (ID) that is used to identify a hosted zone.
	//
	// For example: `Z00001111A1ABCaaABC11` .
	HostedZoneId() *string
	SetHostedZoneId(val *string)
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// The tree node.
	Node() constructs.Node
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::DNSSEC`.

The `AWS::Route53::DNSSEC` resource is used to enable DNSSEC signing in a hosted zone.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnDNSSEC := awscdk.Aws_route53.NewCfnDNSSEC(this, jsii.String("MyCfnDNSSEC"), &cfnDNSSECProps{
	hostedZoneId: jsii.String("hostedZoneId"),
})

func NewCfnDNSSEC 

func NewCfnDNSSEC(scope constructs.Construct, id *string, props *CfnDNSSECProps) CfnDNSSEC

Create a new `AWS::Route53::DNSSEC`.

type CfnDNSSECProps 

type CfnDNSSECProps struct {
	// A unique string (ID) that is used to identify a hosted zone.
	//
	// For example: `Z00001111A1ABCaaABC11` .
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
}

Properties for defining a `CfnDNSSEC`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnDNSSECProps := &cfnDNSSECProps{
	hostedZoneId: jsii.String("hostedZoneId"),
}

type CfnHealthCheck 

type CfnHealthCheck interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// The identifier that Amazon Route 53 assigned to the health check when you created it.
	//
	// When you add or update a resource record set, you use this value to specify which health check to use. The value can be up to 64 characters long.
	AttrHealthCheckId() *string
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// A complex type that contains detailed information about one health check.
	//
	// For the values to enter for `HealthCheckConfig` , see [HealthCheckConfig](https://docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html)
	HealthCheckConfig() interface{}
	SetHealthCheckConfig(val interface{})
	// The `HealthCheckTags` property describes key-value pairs that are associated with an `AWS::Route53::HealthCheck` resource.
	HealthCheckTags() interface{}
	SetHealthCheckTags(val interface{})
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// The tree node.
	Node() constructs.Node
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::HealthCheck`.

The `AWS::Route53::HealthCheck` resource is a Route 53 resource type that contains settings for a Route 53 health check.

For information about associating health checks with records, see [HealthCheckId](https://docs.aws.amazon.com/Route53/latest/APIReference/API_ResourceRecordSet.html#Route53-Type-ResourceRecordSet-HealthCheckId) in [ChangeResourceRecordSets](https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html) .

> You can't create a health check with simple routing.

*ELB Load Balancers*

If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to a Route 53 health check.

*Private Hosted Zones*

You can associate health checks with failover records in a private hosted zone. Note the following:

- Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC. - You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server. - You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 `StatusCheckFailed` metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the [Amazon CloudWatch User Guide](https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html) .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnHealthCheck := awscdk.Aws_route53.NewCfnHealthCheck(this, jsii.String("MyCfnHealthCheck"), &cfnHealthCheckProps{
	healthCheckConfig: &healthCheckConfigProperty{
		type: jsii.String("type"),

		// the properties below are optional
		alarmIdentifier: &alarmIdentifierProperty{
			name: jsii.String("name"),
			region: jsii.String("region"),
		},
		childHealthChecks: []*string{
			jsii.String("childHealthChecks"),
		},
		enableSni: jsii.Boolean(false),
		failureThreshold: jsii.Number(123),
		fullyQualifiedDomainName: jsii.String("fullyQualifiedDomainName"),
		healthThreshold: jsii.Number(123),
		insufficientDataHealthStatus: jsii.String("insufficientDataHealthStatus"),
		inverted: jsii.Boolean(false),
		ipAddress: jsii.String("ipAddress"),
		measureLatency: jsii.Boolean(false),
		port: jsii.Number(123),
		regions: []*string{
			jsii.String("regions"),
		},
		requestInterval: jsii.Number(123),
		resourcePath: jsii.String("resourcePath"),
		routingControlArn: jsii.String("routingControlArn"),
		searchString: jsii.String("searchString"),
	},

	// the properties below are optional
	healthCheckTags: []interface{}{
		&healthCheckTagProperty{
			key: jsii.String("key"),
			value: jsii.String("value"),
		},
	},
})

func NewCfnHealthCheck 

func NewCfnHealthCheck(scope constructs.Construct, id *string, props *CfnHealthCheckProps) CfnHealthCheck

Create a new `AWS::Route53::HealthCheck`.

type CfnHealthCheckProps 

type CfnHealthCheckProps struct {
	// A complex type that contains detailed information about one health check.
	//
	// For the values to enter for `HealthCheckConfig` , see [HealthCheckConfig](https://docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html)
	HealthCheckConfig interface{} `field:"required" json:"healthCheckConfig" yaml:"healthCheckConfig"`
	// The `HealthCheckTags` property describes key-value pairs that are associated with an `AWS::Route53::HealthCheck` resource.
	HealthCheckTags interface{} `field:"optional" json:"healthCheckTags" yaml:"healthCheckTags"`
}

Properties for defining a `CfnHealthCheck`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnHealthCheckProps := &cfnHealthCheckProps{
	healthCheckConfig: &healthCheckConfigProperty{
		type: jsii.String("type"),

		// the properties below are optional
		alarmIdentifier: &alarmIdentifierProperty{
			name: jsii.String("name"),
			region: jsii.String("region"),
		},
		childHealthChecks: []*string{
			jsii.String("childHealthChecks"),
		},
		enableSni: jsii.Boolean(false),
		failureThreshold: jsii.Number(123),
		fullyQualifiedDomainName: jsii.String("fullyQualifiedDomainName"),
		healthThreshold: jsii.Number(123),
		insufficientDataHealthStatus: jsii.String("insufficientDataHealthStatus"),
		inverted: jsii.Boolean(false),
		ipAddress: jsii.String("ipAddress"),
		measureLatency: jsii.Boolean(false),
		port: jsii.Number(123),
		regions: []*string{
			jsii.String("regions"),
		},
		requestInterval: jsii.Number(123),
		resourcePath: jsii.String("resourcePath"),
		routingControlArn: jsii.String("routingControlArn"),
		searchString: jsii.String("searchString"),
	},

	// the properties below are optional
	healthCheckTags: []interface{}{
		&healthCheckTagProperty{
			key: jsii.String("key"),
			value: jsii.String("value"),
		},
	},
}

type CfnHealthCheck_AlarmIdentifierProperty 

type CfnHealthCheck_AlarmIdentifierProperty struct {
	// `CfnHealthCheck.AlarmIdentifierProperty.Name`.
	Name *string `field:"required" json:"name" yaml:"name"`
	// `CfnHealthCheck.AlarmIdentifierProperty.Region`.
	Region *string `field:"required" json:"region" yaml:"region"`
}

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

alarmIdentifierProperty := &alarmIdentifierProperty{
	name: jsii.String("name"),
	region: jsii.String("region"),
}

type CfnHealthCheck_HealthCheckConfigProperty 

type CfnHealthCheck_HealthCheckConfigProperty struct {
	// `CfnHealthCheck.HealthCheckConfigProperty.Type`.
	Type *string `field:"required" json:"type" yaml:"type"`
	// `CfnHealthCheck.HealthCheckConfigProperty.AlarmIdentifier`.
	AlarmIdentifier interface{} `field:"optional" json:"alarmIdentifier" yaml:"alarmIdentifier"`
	// `CfnHealthCheck.HealthCheckConfigProperty.ChildHealthChecks`.
	ChildHealthChecks *[]*string `field:"optional" json:"childHealthChecks" yaml:"childHealthChecks"`
	// `CfnHealthCheck.HealthCheckConfigProperty.EnableSNI`.
	EnableSni interface{} `field:"optional" json:"enableSni" yaml:"enableSni"`
	// `CfnHealthCheck.HealthCheckConfigProperty.FailureThreshold`.
	FailureThreshold *float64 `field:"optional" json:"failureThreshold" yaml:"failureThreshold"`
	// `CfnHealthCheck.HealthCheckConfigProperty.FullyQualifiedDomainName`.
	FullyQualifiedDomainName *string `field:"optional" json:"fullyQualifiedDomainName" yaml:"fullyQualifiedDomainName"`
	// `CfnHealthCheck.HealthCheckConfigProperty.HealthThreshold`.
	HealthThreshold *float64 `field:"optional" json:"healthThreshold" yaml:"healthThreshold"`
	// `CfnHealthCheck.HealthCheckConfigProperty.InsufficientDataHealthStatus`.
	InsufficientDataHealthStatus *string `field:"optional" json:"insufficientDataHealthStatus" yaml:"insufficientDataHealthStatus"`
	// `CfnHealthCheck.HealthCheckConfigProperty.Inverted`.
	Inverted interface{} `field:"optional" json:"inverted" yaml:"inverted"`
	// `CfnHealthCheck.HealthCheckConfigProperty.IPAddress`.
	IpAddress *string `field:"optional" json:"ipAddress" yaml:"ipAddress"`
	// `CfnHealthCheck.HealthCheckConfigProperty.MeasureLatency`.
	MeasureLatency interface{} `field:"optional" json:"measureLatency" yaml:"measureLatency"`
	// `CfnHealthCheck.HealthCheckConfigProperty.Port`.
	Port *float64 `field:"optional" json:"port" yaml:"port"`
	// `CfnHealthCheck.HealthCheckConfigProperty.Regions`.
	Regions *[]*string `field:"optional" json:"regions" yaml:"regions"`
	// `CfnHealthCheck.HealthCheckConfigProperty.RequestInterval`.
	RequestInterval *float64 `field:"optional" json:"requestInterval" yaml:"requestInterval"`
	// `CfnHealthCheck.HealthCheckConfigProperty.ResourcePath`.
	ResourcePath *string `field:"optional" json:"resourcePath" yaml:"resourcePath"`
	// `CfnHealthCheck.HealthCheckConfigProperty.RoutingControlArn`.
	RoutingControlArn *string `field:"optional" json:"routingControlArn" yaml:"routingControlArn"`
	// `CfnHealthCheck.HealthCheckConfigProperty.SearchString`.
	SearchString *string `field:"optional" json:"searchString" yaml:"searchString"`
}

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

healthCheckConfigProperty := &healthCheckConfigProperty{
	type: jsii.String("type"),

	// the properties below are optional
	alarmIdentifier: &alarmIdentifierProperty{
		name: jsii.String("name"),
		region: jsii.String("region"),
	},
	childHealthChecks: []*string{
		jsii.String("childHealthChecks"),
	},
	enableSni: jsii.Boolean(false),
	failureThreshold: jsii.Number(123),
	fullyQualifiedDomainName: jsii.String("fullyQualifiedDomainName"),
	healthThreshold: jsii.Number(123),
	insufficientDataHealthStatus: jsii.String("insufficientDataHealthStatus"),
	inverted: jsii.Boolean(false),
	ipAddress: jsii.String("ipAddress"),
	measureLatency: jsii.Boolean(false),
	port: jsii.Number(123),
	regions: []*string{
		jsii.String("regions"),
	},
	requestInterval: jsii.Number(123),
	resourcePath: jsii.String("resourcePath"),
	routingControlArn: jsii.String("routingControlArn"),
	searchString: jsii.String("searchString"),
}

type CfnHealthCheck_HealthCheckTagProperty 

type CfnHealthCheck_HealthCheckTagProperty struct {
	// The value of `Key` depends on the operation that you want to perform:.
	//
	// - *Add a tag to a health check or hosted zone* : `Key` is the name that you want to give the new tag.
	// - *Edit a tag* : `Key` is the name of the tag that you want to change the `Value` for.
	// - *Delete a key* : `Key` is the name of the tag you want to remove.
	// - *Give a name to a health check* : Edit the default `Name` tag. In the Amazon Route 53 console, the list of your health checks includes a *Name* column that lets you see the name that you've given to each health check.
	Key *string `field:"required" json:"key" yaml:"key"`
	// The value of `Value` depends on the operation that you want to perform:.
	//
	// - *Add a tag to a health check or hosted zone* : `Value` is the value that you want to give the new tag.
	// - *Edit a tag* : `Value` is the new value that you want to assign the tag.
	Value *string `field:"required" json:"value" yaml:"value"`
}

The `HealthCheckTag` property describes one key-value pair that is associated with an `AWS::Route53::HealthCheck` resource.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

healthCheckTagProperty := &healthCheckTagProperty{
	key: jsii.String("key"),
	value: jsii.String("value"),
}

type CfnHostedZone 

type CfnHostedZone interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// The ID that Amazon Route 53 assigned to the hosted zone when you created it.
	AttrId() *string
	// Returns the set of name servers for the specific hosted zone. For example: `ns1.example.com` .
	//
	// This attribute is not supported for private hosted zones.
	AttrNameServers() *[]*string
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// A complex type that contains an optional comment.
	//
	// If you don't want to specify a comment, omit the `HostedZoneConfig` and `Comment` elements.
	HostedZoneConfig() interface{}
	SetHostedZoneConfig(val interface{})
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// The name of the domain.
	//
	// Specify a fully qualified domain name, for example, *www.example.com* . The trailing dot is optional; Amazon Route 53 assumes that the domain name is fully qualified. This means that Route 53 treats *www.example.com* (without a trailing dot) and *www.example.com.* (with a trailing dot) as identical.
	//
	// If you're creating a public hosted zone, this is the name you have registered with your DNS registrar. If your domain name is registered with a registrar other than Route 53, change the name servers for your domain to the set of `NameServers` that are returned by the `Fn::GetAtt` intrinsic function.
	Name() *string
	SetName(val *string)
	// The tree node.
	Node() constructs.Node
	// Creates a configuration for DNS query logging.
	//
	// After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group.
	//
	// DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following:
	//
	// - Route 53 edge location that responded to the DNS query
	// - Domain or subdomain that was requested
	// - DNS record type, such as A or AAAA
	// - DNS response code, such as `NoError` or `ServFail`
	//
	// - **Log Group and Resource Policy** - Before you create a query logging configuration, perform the following operations.
	//
	// > If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically.
	//
	// - Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:
	//
	// - You must create the log group in the us-east-1 region.
	// - You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.
	// - When you create log groups for query logging, we recommend that you use a consistent prefix, for example:
	//
	// `/aws/route53/ *hosted zone name*`
	//
	// In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.
	// - Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of `Resource` , specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with `*` , for example:
	//
	// `arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*`
	//
	// To avoid the confused deputy problem, a security issue where an entity without a permission for an action can coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a resource in a resource-based policy by supplying the following values:
	//
	// - For `aws:SourceArn` , supply the hosted zone ARN used in creating the query logging configuration. For example, `aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID` .
	// - For `aws:SourceAccount` , supply the account ID for the account that creates the query logging configuration. For example, `aws:SourceAccount:111111111111` .
	//
	// For more information, see [The confused deputy problem](https://docs.aws.amazon.com/IAM/latest/UserGuide/confused-deputy.html) in the *AWS IAM User Guide* .
	//
	// > You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI .
	// - **Log Streams and Edge Locations** - When Route 53 finishes creating the configuration for DNS query logging, it does the following:
	//
	// - Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location.
	// - Begins to send query logs to the applicable log stream.
	//
	// The name of each log stream is in the following format:
	//
	// `*hosted zone ID* / *edge location code*`
	//
	// The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see "The Route 53 Global Network" on the [Route 53 Product Details](https://docs.aws.amazon.com/route53/details/) page.
	// - **Queries That Are Logged** - Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see [Routing Internet Traffic to Your Website or Web Application](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/welcome-dns-service.html) in the *Amazon Route 53 Developer Guide* .
	// - **Log File Format** - For a list of the values in each query log and the format of each value, see [Logging DNS Queries](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html) in the *Amazon Route 53 Developer Guide* .
	// - **Pricing** - For information about charges for query logs, see [Amazon CloudWatch Pricing](https://docs.aws.amazon.com/cloudwatch/pricing/) .
	// - **How to Stop Logging** - If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see [DeleteQueryLoggingConfig](https://docs.aws.amazon.com/Route53/latest/APIReference/API_DeleteQueryLoggingConfig.html) .
	QueryLoggingConfig() interface{}
	SetQueryLoggingConfig(val interface{})
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// Adds, edits, or deletes tags for a health check or a hosted zone.
	//
	// For information about using tags for cost allocation, see [Using Cost Allocation Tags](https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the *AWS Billing and Cost Management User Guide* .
	Tags() awscdk.TagManager
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// *Private hosted zones:* A complex type that contains information about the VPCs that are associated with the specified hosted zone.
	//
	// > For public hosted zones, omit `VPCs` , `VPCId` , and `VPCRegion` .
	Vpcs() interface{}
	SetVpcs(val interface{})
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::HostedZone`.

Creates a new public or private hosted zone. You create records in a public hosted zone to define how you want to route traffic on the internet for a domain, such as example.com, and its subdomains (apex.example.com, acme.example.com). You create records in a private hosted zone to define how you want to route traffic for a domain and its subdomains within one or more Amazon Virtual Private Clouds (Amazon VPCs).

> You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new resource record sets.

For more information about charges for hosted zones, see [Amazon Route 53 Pricing](https://docs.aws.amazon.com/route53/pricing/) .

Note the following:

- You can't create a hosted zone for a top-level domain (TLD) such as .com. - For public hosted zones, Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see [NS and SOA Records that Route 53 Creates for a Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/SOA-NSrecords.html) in the *Amazon Route 53 Developer Guide* .

If you want to use the same name servers for multiple public hosted zones, you can optionally associate a reusable delegation set with the hosted zone. See the `DelegationSetId` element. - If your domain is registered with a registrar other than Route 53, you must update the name servers with your registrar to make Route 53 the DNS service for the domain. For more information, see [Migrating DNS Service for an Existing Domain to Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/MigratingDNS.html) in the *Amazon Route 53 Developer Guide* .

When you submit a `CreateHostedZone` request, the initial status of the hosted zone is `PENDING` . For public hosted zones, this means that the NS and SOA records are not yet available on all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to `INSYNC` .

The `CreateHostedZone` request requires the caller to have an `ec2:DescribeVpcs` permission.

> When creating private hosted zones, the Amazon VPC must belong to the same partition where the hosted zone is created. A partition is a group of AWS Regions . Each AWS account is scoped to one partition. > > The following are the supported partitions: > > - `aws` - AWS Regions > - `aws-cn` - China Regions > - `aws-us-gov` - AWS GovCloud (US) Region > > For more information, see [Access Management](https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html) in the *AWS General Reference* .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnHostedZone := awscdk.Aws_route53.NewCfnHostedZone(this, jsii.String("MyCfnHostedZone"), &cfnHostedZoneProps{
	hostedZoneConfig: &hostedZoneConfigProperty{
		comment: jsii.String("comment"),
	},
	hostedZoneTags: []hostedZoneTagProperty{
		&hostedZoneTagProperty{
			key: jsii.String("key"),
			value: jsii.String("value"),
		},
	},
	name: jsii.String("name"),
	queryLoggingConfig: &queryLoggingConfigProperty{
		cloudWatchLogsLogGroupArn: jsii.String("cloudWatchLogsLogGroupArn"),
	},
	vpcs: []interface{}{
		&vPCProperty{
			vpcId: jsii.String("vpcId"),
			vpcRegion: jsii.String("vpcRegion"),
		},
	},
})

func NewCfnHostedZone 

func NewCfnHostedZone(scope constructs.Construct, id *string, props *CfnHostedZoneProps) CfnHostedZone

Create a new `AWS::Route53::HostedZone`.

type CfnHostedZoneProps 

type CfnHostedZoneProps struct {
	// A complex type that contains an optional comment.
	//
	// If you don't want to specify a comment, omit the `HostedZoneConfig` and `Comment` elements.
	HostedZoneConfig interface{} `field:"optional" json:"hostedZoneConfig" yaml:"hostedZoneConfig"`
	// Adds, edits, or deletes tags for a health check or a hosted zone.
	//
	// For information about using tags for cost allocation, see [Using Cost Allocation Tags](https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the *AWS Billing and Cost Management User Guide* .
	HostedZoneTags *[]*CfnHostedZone_HostedZoneTagProperty `field:"optional" json:"hostedZoneTags" yaml:"hostedZoneTags"`
	// The name of the domain.
	//
	// Specify a fully qualified domain name, for example, *www.example.com* . The trailing dot is optional; Amazon Route 53 assumes that the domain name is fully qualified. This means that Route 53 treats *www.example.com* (without a trailing dot) and *www.example.com.* (with a trailing dot) as identical.
	//
	// If you're creating a public hosted zone, this is the name you have registered with your DNS registrar. If your domain name is registered with a registrar other than Route 53, change the name servers for your domain to the set of `NameServers` that are returned by the `Fn::GetAtt` intrinsic function.
	Name *string `field:"optional" json:"name" yaml:"name"`
	// Creates a configuration for DNS query logging.
	//
	// After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group.
	//
	// DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following:
	//
	// - Route 53 edge location that responded to the DNS query
	// - Domain or subdomain that was requested
	// - DNS record type, such as A or AAAA
	// - DNS response code, such as `NoError` or `ServFail`
	//
	// - **Log Group and Resource Policy** - Before you create a query logging configuration, perform the following operations.
	//
	// > If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically.
	//
	// - Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:
	//
	// - You must create the log group in the us-east-1 region.
	// - You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.
	// - When you create log groups for query logging, we recommend that you use a consistent prefix, for example:
	//
	// `/aws/route53/ *hosted zone name*`
	//
	// In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.
	// - Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of `Resource` , specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with `*` , for example:
	//
	// `arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*`
	//
	// To avoid the confused deputy problem, a security issue where an entity without a permission for an action can coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a resource in a resource-based policy by supplying the following values:
	//
	// - For `aws:SourceArn` , supply the hosted zone ARN used in creating the query logging configuration. For example, `aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID` .
	// - For `aws:SourceAccount` , supply the account ID for the account that creates the query logging configuration. For example, `aws:SourceAccount:111111111111` .
	//
	// For more information, see [The confused deputy problem](https://docs.aws.amazon.com/IAM/latest/UserGuide/confused-deputy.html) in the *AWS IAM User Guide* .
	//
	// > You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI .
	// - **Log Streams and Edge Locations** - When Route 53 finishes creating the configuration for DNS query logging, it does the following:
	//
	// - Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location.
	// - Begins to send query logs to the applicable log stream.
	//
	// The name of each log stream is in the following format:
	//
	// `*hosted zone ID* / *edge location code*`
	//
	// The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see "The Route 53 Global Network" on the [Route 53 Product Details](https://docs.aws.amazon.com/route53/details/) page.
	// - **Queries That Are Logged** - Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see [Routing Internet Traffic to Your Website or Web Application](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/welcome-dns-service.html) in the *Amazon Route 53 Developer Guide* .
	// - **Log File Format** - For a list of the values in each query log and the format of each value, see [Logging DNS Queries](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html) in the *Amazon Route 53 Developer Guide* .
	// - **Pricing** - For information about charges for query logs, see [Amazon CloudWatch Pricing](https://docs.aws.amazon.com/cloudwatch/pricing/) .
	// - **How to Stop Logging** - If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see [DeleteQueryLoggingConfig](https://docs.aws.amazon.com/Route53/latest/APIReference/API_DeleteQueryLoggingConfig.html) .
	QueryLoggingConfig interface{} `field:"optional" json:"queryLoggingConfig" yaml:"queryLoggingConfig"`
	// *Private hosted zones:* A complex type that contains information about the VPCs that are associated with the specified hosted zone.
	//
	// > For public hosted zones, omit `VPCs` , `VPCId` , and `VPCRegion` .
	Vpcs interface{} `field:"optional" json:"vpcs" yaml:"vpcs"`
}

Properties for defining a `CfnHostedZone`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnHostedZoneProps := &cfnHostedZoneProps{
	hostedZoneConfig: &hostedZoneConfigProperty{
		comment: jsii.String("comment"),
	},
	hostedZoneTags: []hostedZoneTagProperty{
		&hostedZoneTagProperty{
			key: jsii.String("key"),
			value: jsii.String("value"),
		},
	},
	name: jsii.String("name"),
	queryLoggingConfig: &queryLoggingConfigProperty{
		cloudWatchLogsLogGroupArn: jsii.String("cloudWatchLogsLogGroupArn"),
	},
	vpcs: []interface{}{
		&vPCProperty{
			vpcId: jsii.String("vpcId"),
			vpcRegion: jsii.String("vpcRegion"),
		},
	},
}

type CfnHostedZone_HostedZoneConfigProperty 

type CfnHostedZone_HostedZoneConfigProperty struct {
	// Any comments that you want to include about the hosted zone.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
}

A complex type that contains an optional comment about your hosted zone.

If you don't want to specify a comment, omit both the `HostedZoneConfig` and `Comment` elements.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

hostedZoneConfigProperty := &hostedZoneConfigProperty{
	comment: jsii.String("comment"),
}

type CfnHostedZone_HostedZoneTagProperty 

type CfnHostedZone_HostedZoneTagProperty struct {
	// The value of `Key` depends on the operation that you want to perform:.
	//
	// - *Add a tag to a health check or hosted zone* : `Key` is the name that you want to give the new tag.
	// - *Edit a tag* : `Key` is the name of the tag that you want to change the `Value` for.
	// - *Delete a key* : `Key` is the name of the tag you want to remove.
	// - *Give a name to a health check* : Edit the default `Name` tag. In the Amazon Route 53 console, the list of your health checks includes a *Name* column that lets you see the name that you've given to each health check.
	Key *string `field:"required" json:"key" yaml:"key"`
	// The value of `Value` depends on the operation that you want to perform:.
	//
	// - *Add a tag to a health check or hosted zone* : `Value` is the value that you want to give the new tag.
	// - *Edit a tag* : `Value` is the new value that you want to assign the tag.
	Value *string `field:"required" json:"value" yaml:"value"`
}

A complex type that contains information about a tag that you want to add or edit for the specified health check or hosted zone.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

hostedZoneTagProperty := &hostedZoneTagProperty{
	key: jsii.String("key"),
	value: jsii.String("value"),
}

type CfnHostedZone_QueryLoggingConfigProperty 

type CfnHostedZone_QueryLoggingConfigProperty struct {
	// The Amazon Resource Name (ARN) of the CloudWatch Logs log group that Amazon Route 53 is publishing logs to.
	CloudWatchLogsLogGroupArn *string `field:"required" json:"cloudWatchLogsLogGroupArn" yaml:"cloudWatchLogsLogGroupArn"`
}

A complex type that contains information about a configuration for DNS query logging.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

queryLoggingConfigProperty := &queryLoggingConfigProperty{
	cloudWatchLogsLogGroupArn: jsii.String("cloudWatchLogsLogGroupArn"),
}

type CfnHostedZone_VPCProperty 

type CfnHostedZone_VPCProperty struct {
	// *Private hosted zones only:* The ID of an Amazon VPC.
	//
	// > For public hosted zones, omit `VPCs` , `VPCId` , and `VPCRegion` .
	VpcId *string `field:"required" json:"vpcId" yaml:"vpcId"`
	// *Private hosted zones only:* The region that an Amazon VPC was created in.
	//
	// > For public hosted zones, omit `VPCs` , `VPCId` , and `VPCRegion` .
	VpcRegion *string `field:"required" json:"vpcRegion" yaml:"vpcRegion"`
}

*Private hosted zones only:* A complex type that contains information about an Amazon VPC.

Route 53 Resolver uses the records in the private hosted zone to route traffic in that VPC.

> For public hosted zones, omit `VPCs` , `VPCId` , and `VPCRegion` .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

vPCProperty := &vPCProperty{
	vpcId: jsii.String("vpcId"),
	vpcRegion: jsii.String("vpcRegion"),
}

type CfnKeySigningKey 

type CfnKeySigningKey interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// The unique string (ID) that is used to identify a hosted zone.
	//
	// For example: `Z00001111A1ABCaaABC11` .
	HostedZoneId() *string
	SetHostedZoneId(val *string)
	// The Amazon resource name (ARN) for a customer managed customer master key (CMK) in AWS Key Management Service ( AWS KMS ).
	//
	// The `KeyManagementServiceArn` must be unique for each key-signing key (KSK) in a single hosted zone. For example: `arn:aws:kms:us-east-1:111122223333:key/111a2222-a11b-1ab1-2ab2-1ab21a2b3a111` .
	KeyManagementServiceArn() *string
	SetKeyManagementServiceArn(val *string)
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// A string used to identify a key-signing key (KSK).
	//
	// `Name` can include numbers, letters, and underscores (_). `Name` must be unique for each key-signing key in the same hosted zone.
	Name() *string
	SetName(val *string)
	// The tree node.
	Node() constructs.Node
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// A string that represents the current key-signing key (KSK) status.
	//
	// Status can have one of the following values:
	//
	// - **ACTIVE** - The KSK is being used for signing.
	// - **INACTIVE** - The KSK is not being used for signing.
	// - **DELETING** - The KSK is in the process of being deleted.
	// - **ACTION_NEEDED** - There is a problem with the KSK that requires you to take action to resolve. For example, the customer managed key might have been deleted, or the permissions for the customer managed key might have been changed.
	// - **INTERNAL_FAILURE** - There was an error during a request. Before you can continue to work with DNSSEC signing, including actions that involve this KSK, you must correct the problem. For example, you may need to activate or deactivate the KSK.
	Status() *string
	SetStatus(val *string)
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::KeySigningKey`.

The `AWS::Route53::KeySigningKey` resource creates a new key-signing key (KSK) in a hosted zone. The hosted zone ID is passed as a parameter in the KSK properties. You can specify the properties of this KSK using the `Name` , `Status` , and `KeyManagementServiceArn` properties of the resource.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnKeySigningKey := awscdk.Aws_route53.NewCfnKeySigningKey(this, jsii.String("MyCfnKeySigningKey"), &cfnKeySigningKeyProps{
	hostedZoneId: jsii.String("hostedZoneId"),
	keyManagementServiceArn: jsii.String("keyManagementServiceArn"),
	name: jsii.String("name"),
	status: jsii.String("status"),
})

func NewCfnKeySigningKey 

func NewCfnKeySigningKey(scope constructs.Construct, id *string, props *CfnKeySigningKeyProps) CfnKeySigningKey

Create a new `AWS::Route53::KeySigningKey`.

type CfnKeySigningKeyProps 

type CfnKeySigningKeyProps struct {
	// The unique string (ID) that is used to identify a hosted zone.
	//
	// For example: `Z00001111A1ABCaaABC11` .
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
	// The Amazon resource name (ARN) for a customer managed customer master key (CMK) in AWS Key Management Service ( AWS KMS ).
	//
	// The `KeyManagementServiceArn` must be unique for each key-signing key (KSK) in a single hosted zone. For example: `arn:aws:kms:us-east-1:111122223333:key/111a2222-a11b-1ab1-2ab2-1ab21a2b3a111` .
	KeyManagementServiceArn *string `field:"required" json:"keyManagementServiceArn" yaml:"keyManagementServiceArn"`
	// A string used to identify a key-signing key (KSK).
	//
	// `Name` can include numbers, letters, and underscores (_). `Name` must be unique for each key-signing key in the same hosted zone.
	Name *string `field:"required" json:"name" yaml:"name"`
	// A string that represents the current key-signing key (KSK) status.
	//
	// Status can have one of the following values:
	//
	// - **ACTIVE** - The KSK is being used for signing.
	// - **INACTIVE** - The KSK is not being used for signing.
	// - **DELETING** - The KSK is in the process of being deleted.
	// - **ACTION_NEEDED** - There is a problem with the KSK that requires you to take action to resolve. For example, the customer managed key might have been deleted, or the permissions for the customer managed key might have been changed.
	// - **INTERNAL_FAILURE** - There was an error during a request. Before you can continue to work with DNSSEC signing, including actions that involve this KSK, you must correct the problem. For example, you may need to activate or deactivate the KSK.
	Status *string `field:"required" json:"status" yaml:"status"`
}

Properties for defining a `CfnKeySigningKey`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnKeySigningKeyProps := &cfnKeySigningKeyProps{
	hostedZoneId: jsii.String("hostedZoneId"),
	keyManagementServiceArn: jsii.String("keyManagementServiceArn"),
	name: jsii.String("name"),
	status: jsii.String("status"),
}

type CfnRecordSet 

type CfnRecordSet interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to.
	//
	// If you're creating resource records sets for a private hosted zone, note the following:
	//
	// - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution.
	// - Creating geolocation alias resource record sets or latency alias resource record sets in a private hosted zone is unsupported.
	// - For information about creating failover resource record sets in a private hosted zone, see [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html) in the *Amazon Route 53 Developer Guide* .
	AliasTarget() interface{}
	SetAliasTarget(val interface{})
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// `AWS::Route53::RecordSet.CidrRoutingConfig`.
	CidrRoutingConfig() interface{}
	SetCidrRoutingConfig(val interface{})
	// *Optional:* Any comments you want to include about a change batch request.
	Comment() *string
	SetComment(val *string)
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// *Failover resource record sets only:* To configure failover, you add the `Failover` element to two resource record sets.
	//
	// For one resource record set, you specify `PRIMARY` as the value for `Failover` ; for the other resource record set, you specify `SECONDARY` . In addition, you include the `HealthCheckId` element and specify the health check that you want Amazon Route 53 to perform for each resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have included the `HealthCheckId` element in both resource record sets:
	//
	// - When the primary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set.
	// - When the primary resource record set is unhealthy and the secondary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the secondary resource record set.
	// - When the secondary resource record set is unhealthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set.
	// - If you omit the `HealthCheckId` element for the secondary resource record set, and if the primary resource record set is unhealthy, Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint.
	//
	// You can't create non-failover resource record sets that have the same values for the `Name` and `Type` elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the `EvaluateTargetHealth` element and set the value to true.
	//
	// For more information about configuring failover for Route 53, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	Failover() *string
	SetFailover(val *string)
	// *Geolocation resource record sets only:* A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
	//
	// For example, if you want all queries from Africa to be routed to a web server with an IP address of `192.0.2.111` , create a resource record set with a `Type` of `A` and a `ContinentCode` of `AF` .
	//
	// > Although creating geolocation and geolocation alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource.
	//
	// You can't create two geolocation resource record sets that specify the same geographic location.
	//
	// The value `*` in the `CountryCode` element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the `Name` and `Type` elements.
	//
	// > Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of `CountryCode` is `*` . Two groups of queries are routed to the resource that you specify in this record: queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a `*` resource record set, Route 53 returns a "no answer" response for queries from those locations.
	//
	// You can't create non-geolocation resource record sets that have the same values for the `Name` and `Type` elements as geolocation resource record sets.
	GeoLocation() interface{}
	SetGeoLocation(val interface{})
	// If you want Amazon Route 53 to return this resource record set in response to a DNS query only when the status of a health check is healthy, include the `HealthCheckId` element and specify the ID of the applicable health check.
	//
	// Route 53 determines whether a resource record set is healthy based on one of the following:
	//
	// - By periodically sending a request to the endpoint that is specified in the health check
	// - By aggregating the status of a specified group of health checks (calculated health checks)
	// - By determining the current state of a CloudWatch alarm (CloudWatch metric health checks)
	//
	// > Route 53 doesn't check the health of the endpoint that is specified in the resource record set, for example, the endpoint specified by the IP address in the `Value` element. When you add a `HealthCheckId` element to a resource record set, Route 53 checks the health of the endpoint that you specified in the health check.
	//
	// For more information, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//
	// *When to Specify HealthCheckId*
	//
	// Specifying a value for `HealthCheckId` is useful only when Route 53 is choosing between two or more resource record sets to respond to a DNS query, and you want Route 53 to base the choice in part on the status of a health check. Configuring health checks makes sense only in the following configurations:
	//
	// - *Non-alias resource record sets* : You're checking the health of a group of non-alias resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A) and you specify health check IDs for all the resource record sets.
	//
	// If the health check status for a resource record set is healthy, Route 53 includes the record among the records that it responds to DNS queries with.
	//
	// If the health check status for a resource record set is unhealthy, Route 53 stops responding to DNS queries using the value for that resource record set.
	//
	// If the health check status for all resource record sets in the group is unhealthy, Route 53 considers all resource record sets in the group healthy and responds to DNS queries accordingly.
	// - *Alias resource record sets* : You specify the following settings:
	//
	// - You set `EvaluateTargetHealth` to true for an alias resource record set in a group of resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A).
	// - You configure the alias resource record set to route traffic to a non-alias resource record set in the same hosted zone.
	// - You specify a health check ID for the non-alias resource record set.
	//
	// If the health check status is healthy, Route 53 considers the alias resource record set to be healthy and includes the alias record among the records that it responds to DNS queries with.
	//
	// If the health check status is unhealthy, Route 53 stops responding to DNS queries using the alias resource record set.
	//
	// > The alias resource record set can also route traffic to a *group* of non-alias resource record sets that have the same routing policy, name, and type. In that configuration, associate health checks with all of the resource record sets in the group of non-alias resource record sets.
	//
	// *Geolocation Routing*
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Route 53 looks for a resource record set for the larger, associated geographic region. For example, suppose you have resource record sets for a state in the United States, for the entire United States, for North America, and a resource record set that has `*` for `CountryCode` is `*` , which applies to all locations. If the endpoint for the state resource record set is unhealthy, Route 53 checks for healthy resource record sets in the following order until it finds a resource record set for which the endpoint is healthy:
	//
	// - The United States
	// - North America
	// - The default resource record set
	//
	// *Specifying the Health Check Endpoint by Domain Name*
	//
	// If your health checks specify the endpoint only by domain name, we recommend that you create a separate health check for each endpoint. For example, create a health check for each `HTTP` server that is serving content for `www.example.com` . For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as `us-east-2-www.example.com` ), not the name of the resource record sets ( `www.example.com` ).
	//
	// > Health check results will be unpredictable if you do the following:
	// >
	// > - Create a health check that has the same value for `FullyQualifiedDomainName` as the name of a resource record set.
	// > - Associate that health check with the resource record set.
	HealthCheckId() *string
	SetHealthCheckId(val *string)
	// The ID of the hosted zone that you want to create records in.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneId() *string
	SetHostedZoneId(val *string)
	// The name of the hosted zone that you want to create records in.
	//
	// You must include a trailing dot (for example, `www.example.com.` ) as part of the `HostedZoneName` .
	//
	// When you create a stack using an AWS::Route53::RecordSet that specifies `HostedZoneName` , AWS CloudFormation attempts to find a hosted zone whose name matches the HostedZoneName. If AWS CloudFormation cannot find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneName() *string
	SetHostedZoneName(val *string)
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// *Multivalue answer resource record sets only* : To route traffic approximately randomly to multiple resources, such as web servers, create one multivalue answer record for each resource and specify `true` for `MultiValueAnswer` .
	//
	// Note the following:
	//
	// - If you associate a health check with a multivalue answer resource record set, Amazon Route 53 responds to DNS queries with the corresponding IP address only when the health check is healthy.
	// - If you don't associate a health check with a multivalue answer record, Route 53 always considers the record to be healthy.
	// - Route 53 responds to DNS queries with up to eight healthy records; if you have eight or fewer healthy records, Route 53 responds to all DNS queries with all the healthy records.
	// - If you have more than eight healthy records, Route 53 responds to different DNS resolvers with different combinations of healthy records.
	// - When all records are unhealthy, Route 53 responds to DNS queries with up to eight unhealthy records.
	// - If a resource becomes unavailable after a resolver caches a response, client software typically tries another of the IP addresses in the response.
	//
	// You can't create multivalue answer alias records.
	MultiValueAnswer() interface{}
	SetMultiValueAnswer(val interface{})
	// For `ChangeResourceRecordSets` requests, the name of the record that you want to create, update, or delete.
	//
	// For `ListResourceRecordSets` responses, the name of a record in the specified hosted zone.
	//
	// *ChangeResourceRecordSets Only*
	//
	// Enter a fully qualified domain name, for example, `www.example.com` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats `www.example.com` (without a trailing dot) and `www.example.com.` (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than `a-z` , `0-9` , and `-` (hyphen) and how to specify internationalized domain names, see [DNS Domain Name Format](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the *Amazon Route 53 Developer Guide* .
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, `*.example.com` . Note the following:
	//
	// - The * must replace the entire label. For example, you can't specify `*prod.example.com` or `prod*.example.com` .
	// - The * can't replace any of the middle labels, for example, marketing.*.example.com.
	// - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	// > You can't use the * wildcard for resource records sets that have a type of NS.
	//
	// You can use the * wildcard as the leftmost label in a domain name, for example, `*.example.com` . You can't use an * for one of the middle labels, for example, `marketing.*.example.com` . In addition, the * must replace the entire label; for example, you can't specify `prod*.example.com` .
	Name() *string
	SetName(val *string)
	// The tree node.
	Node() constructs.Node
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// *Latency-based resource record sets only:* The Amazon EC2 Region where you created the resource that this resource record set refers to.
	//
	// The resource typically is an AWS resource, such as an EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type.
	//
	// > Although creating latency and latency alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 Region. Route 53 then returns the value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	// - You can only specify one `ResourceRecord` per latency resource record set.
	// - You can only create one latency resource record set for each Amazon EC2 Region.
	// - You aren't required to create latency resource record sets for all Amazon EC2 Regions. Route 53 will choose the region with the best latency from among the regions that you create latency resource record sets for.
	// - You can't create non-latency resource record sets that have the same values for the `Name` and `Type` elements as latency resource record sets.
	Region() *string
	SetRegion(val *string)
	// One or more values that correspond with the value that you specified for the `Type` property.
	//
	// For example, if you specified `A` for `Type` , you specify one or more IP addresses in IPv4 format for `ResourceRecords` . For information about the format of values for each record type, see [Supported DNS Resource Record Types](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html) in the *Amazon Route 53 Developer Guide* .
	//
	// Note the following:
	//
	// - You can specify more than one value for all record types except CNAME and SOA.
	// - The maximum length of a value is 4000 characters.
	// - If you're creating an alias record, omit `ResourceRecords` .
	ResourceRecords() *[]*string
	SetResourceRecords(val *[]*string)
	// *Resource record sets that have a routing policy other than simple:* An identifier that differentiates among multiple resource record sets that have the same combination of name and type, such as multiple weighted resource record sets named acme.example.com that have a type of A. In a group of resource record sets that have the same name and type, the value of `SetIdentifier` must be unique for each resource record set.
	//
	// For information about routing policies, see [Choosing a Routing Policy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html) in the *Amazon Route 53 Developer Guide* .
	SetIdentifier() *string
	SetSetIdentifier(val *string)
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// The resource record cache time to live (TTL), in seconds. Note the following:.
	//
	// - If you're creating or updating an alias resource record set, omit `TTL` . Amazon Route 53 uses the value of `TTL` for the alias target.
	// - If you're associating this resource record set with a health check (if you're adding a `HealthCheckId` element), we recommend that you specify a `TTL` of 60 seconds or less so clients respond quickly to changes in health status.
	// - All of the resource record sets in a group of weighted resource record sets must have the same value for `TTL` .
	// - If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a `TTL` of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for `Weight` .
	Ttl() *string
	SetTtl(val *string)
	// The DNS record type.
	//
	// For information about different record types and how data is encoded for them, see [Supported DNS Resource Record Types](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html) in the *Amazon Route 53 Developer Guide* .
	//
	// Valid values for basic resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `DS` | `MX` | `NAPTR` | `NS` | `PTR` | `SOA` | `SPF` | `SRV` | `TXT`
	//
	// Values for weighted, latency, geolocation, and failover resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
	//
	// Valid values for multivalue answer resource record sets: `A` | `AAAA` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT`
	//
	// > SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of `Type` is `SPF` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, [The SPF DNS Record Type](https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1) .
	//
	// Values for alias resource record sets:
	//
	// - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* `A`
	// - *CloudFront distributions:* `A`
	//
	// If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of `A` and one with a value of `AAAA` .
	// - *Amazon API Gateway environment that has a regionalized subdomain* : `A`
	// - *ELB load balancers:* `A` | `AAAA`
	// - *Amazon S3 buckets:* `A`
	// - *Amazon Virtual Private Cloud interface VPC endpoints* `A`
	// - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except `NS` and `SOA` .
	//
	// > If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of `Type` is `CNAME` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
	Type() *string
	SetType(val *string)
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// *Weighted resource record sets only:* Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.
	//
	// Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following:
	//
	// - You must specify a value for the `Weight` element for every weighted resource record set.
	// - You can only specify one `ResourceRecord` per weighted resource record set.
	// - You can't create latency, failover, or geolocation resource record sets that have the same values for the `Name` and `Type` elements as weighted resource record sets.
	// - You can create a maximum of 100 weighted resource record sets that have the same values for the `Name` and `Type` elements.
	// - For weighted (but not weighted alias) resource record sets, if you set `Weight` to `0` for a resource record set, Route 53 never responds to queries with the applicable value for that resource record set. However, if you set `Weight` to `0` for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability.
	//
	// The effect of setting `Weight` to `0` is different when you associate health checks with weighted resource record sets. For more information, see [Options for Configuring Route 53 Active-Active and Active-Passive Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html) in the *Amazon Route 53 Developer Guide* .
	Weight() *float64
	SetWeight(val *float64)
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::RecordSet`.

Information about the record that you want to create.

The `AWS::Route53::RecordSet` type can be used as a standalone resource or as an embedded property in the `AWS::Route53::RecordSetGroup` type. Note that some `AWS::Route53::RecordSet` properties are valid only when used within `AWS::Route53::RecordSetGroup` .

For more information, see [ChangeResourceRecordSets](https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html) in the *Amazon Route 53 API Reference* .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnRecordSet := awscdk.Aws_route53.NewCfnRecordSet(this, jsii.String("MyCfnRecordSet"), &cfnRecordSetProps{
	name: jsii.String("name"),
	type: jsii.String("type"),

	// the properties below are optional
	aliasTarget: &aliasTargetProperty{
		dnsName: jsii.String("dnsName"),
		hostedZoneId: jsii.String("hostedZoneId"),

		// the properties below are optional
		evaluateTargetHealth: jsii.Boolean(false),
	},
	cidrRoutingConfig: &cidrRoutingConfigProperty{
		collectionId: jsii.String("collectionId"),
		locationName: jsii.String("locationName"),
	},
	comment: jsii.String("comment"),
	failover: jsii.String("failover"),
	geoLocation: &geoLocationProperty{
		continentCode: jsii.String("continentCode"),
		countryCode: jsii.String("countryCode"),
		subdivisionCode: jsii.String("subdivisionCode"),
	},
	healthCheckId: jsii.String("healthCheckId"),
	hostedZoneId: jsii.String("hostedZoneId"),
	hostedZoneName: jsii.String("hostedZoneName"),
	multiValueAnswer: jsii.Boolean(false),
	region: jsii.String("region"),
	resourceRecords: []*string{
		jsii.String("resourceRecords"),
	},
	setIdentifier: jsii.String("setIdentifier"),
	ttl: jsii.String("ttl"),
	weight: jsii.Number(123),
})

func NewCfnRecordSet 

func NewCfnRecordSet(scope constructs.Construct, id *string, props *CfnRecordSetProps) CfnRecordSet

Create a new `AWS::Route53::RecordSet`.

type CfnRecordSetGroup 

type CfnRecordSetGroup interface {
	awscdk.CfnResource
	awscdk.IInspectable
	// Options for this resource, such as condition, update policy etc.
	CfnOptions() awscdk.ICfnResourceOptions
	CfnProperties() *map[string]interface{}
	// AWS resource type.
	CfnResourceType() *string
	// *Optional:* Any comments you want to include about a change batch request.
	Comment() *string
	SetComment(val *string)
	// Returns: the stack trace of the point where this Resource was created from, sourced
	// from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most
	// node +internal+ entries filtered.
	CreationStack() *[]*string
	// The ID of the hosted zone that you want to create records in.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneId() *string
	SetHostedZoneId(val *string)
	// The name of the hosted zone that you want to create records in.
	//
	// You must include a trailing dot (for example, `www.example.com.` ) as part of the `HostedZoneName` .
	//
	// When you create a stack using an `AWS::Route53::RecordSet` that specifies `HostedZoneName` , AWS CloudFormation attempts to find a hosted zone whose name matches the `HostedZoneName` . If AWS CloudFormation can't find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneName() *string
	SetHostedZoneName(val *string)
	// The logical ID for this CloudFormation stack element.
	//
	// The logical ID of the element
	// is calculated from the path of the resource node in the construct tree.
	//
	// To override this value, use `overrideLogicalId(newLogicalId)`.
	//
	// Returns: the logical ID as a stringified token. This value will only get
	// resolved during synthesis.
	LogicalId() *string
	// The tree node.
	Node() constructs.Node
	// A complex type that contains one `RecordSet` element for each record that you want to create.
	RecordSets() interface{}
	SetRecordSets(val interface{})
	// Return a string that will be resolved to a CloudFormation `{ Ref }` for this element.
	//
	// If, by any chance, the intrinsic reference of a resource is not a string, you could
	// coerce it to an IResolvable through `Lazy.any({ produce: resource.ref })`.
	Ref() *string
	// The stack in which this element is defined.
	//
	// CfnElements must be defined within a stack scope (directly or indirectly).
	Stack() awscdk.Stack
	// Deprecated.
	// Deprecated: use `updatedProperties`
	//
	// Return properties modified after initiation
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperites() *map[string]interface{}
	// Return properties modified after initiation.
	//
	// Resources that expose mutable properties should override this function to
	// collect and return the properties object for this resource.
	UpdatedProperties() *map[string]interface{}
	// Syntactic sugar for `addOverride(path, undefined)`.
	AddDeletionOverride(path *string)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	//
	// This can be used for resources across stacks (or nested stack) boundaries
	// and the dependency will automatically be transferred to the relevant scope.
	AddDependency(target awscdk.CfnResource)
	// Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
	// Deprecated: use addDependency.
	AddDependsOn(target awscdk.CfnResource)
	// Add a value to the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	AddMetadata(key *string, value interface{})
	// Adds an override to the synthesized CloudFormation resource.
	//
	// To add a
	// property override, either use `addPropertyOverride` or prefix `path` with
	// "Properties." (i.e. `Properties.TopicName`).
	//
	// If the override is nested, separate each nested level using a dot (.) in the path parameter.
	// If there is an array as part of the nesting, specify the index in the path.
	//
	// To include a literal `.` in the property name, prefix with a `\`. In most
	// programming languages you will need to write this as `"\\."` because the
	// `\` itself will need to be escaped.
	//
	// For example,
	// “`typescript
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
	// cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
	// “`
	// would add the overrides
	// “`json
	// "Properties": {
	//    "GlobalSecondaryIndexes": [
	//      {
	//        "Projection": {
	//          "NonKeyAttributes": [ "myattribute" ]
	//          ...
	//        }
	//        ...
	//      },
	//      {
	//        "ProjectionType": "INCLUDE"
	//        ...
	//      },
	//    ]
	//    ...
	// }
	// “`
	//
	// The `value` argument to `addOverride` will not be processed or translated
	// in any way. Pass raw JSON values in here with the correct capitalization
	// for CloudFormation. If you pass CDK classes or structs, they will be
	// rendered with lowercased key names, and CloudFormation will reject the
	// template.
	AddOverride(path *string, value interface{})
	// Adds an override that deletes the value of a property from the resource definition.
	AddPropertyDeletionOverride(propertyPath *string)
	// Adds an override to a resource property.
	//
	// Syntactic sugar for `addOverride("Properties.<...>", value)`.
	AddPropertyOverride(propertyPath *string, value interface{})
	// Sets the deletion policy of the resource based on the removal policy specified.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`). In some
	// cases, a snapshot can be taken of the resource prior to deletion
	// (`RemovalPolicy.SNAPSHOT`). A list of resources that support this policy
	// can be found in the following link:.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options
	//
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy, options *awscdk.RemovalPolicyOptions)
	// Returns a token for an runtime attribute of this resource.
	//
	// Ideally, use generated attribute accessors (e.g. `resource.arn`), but this can be used for future compatibility
	// in case there is no generated attribute.
	GetAtt(attributeName *string, typeHint awscdk.ResolutionTypeHint) awscdk.Reference
	// Retrieve a value value from the CloudFormation Resource Metadata.
	// See: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
	//
	// Note that this is a different set of metadata from CDK node metadata; this
	// metadata ends up in the stack template under the resource, whereas CDK
	// node metadata ends up in the Cloud Assembly.
	//
	GetMetadata(key *string) interface{}
	// Examines the CloudFormation resource and discloses attributes.
	Inspect(inspector awscdk.TreeInspector)
	// Retrieves an array of resources this resource depends on.
	//
	// This assembles dependencies on resources across stacks (including nested stacks)
	// automatically.
	ObtainDependencies() *[]interface{}
	// Get a shallow copy of dependencies between this resource and other resources in the same stack.
	ObtainResourceDependencies() *[]awscdk.CfnResource
	// Overrides the auto-generated logical ID with a specific ID.
	OverrideLogicalId(newLogicalId *string)
	// Indicates that this resource no longer depends on another resource.
	//
	// This can be used for resources across stacks (including nested stacks)
	// and the dependency will automatically be removed from the relevant scope.
	RemoveDependency(target awscdk.CfnResource)
	RenderProperties(props *map[string]interface{}) *map[string]interface{}
	// Replaces one dependency with another.
	ReplaceDependency(target awscdk.CfnResource, newTarget awscdk.CfnResource)
	// Can be overridden by subclasses to determine if this resource will be rendered into the cloudformation template.
	//
	// Returns: `true` if the resource should be included or `false` is the resource
	// should be omitted.
	ShouldSynthesize() *bool
	// Returns a string representation of this construct.
	//
	// Returns: a string representation of this resource.
	ToString() *string
	ValidateProperties(_properties interface{})
}

A CloudFormation `AWS::Route53::RecordSetGroup`.

A complex type that contains an optional comment, the name and ID of the hosted zone that you want to make changes in, and values for the records that you want to create.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnRecordSetGroup := awscdk.Aws_route53.NewCfnRecordSetGroup(this, jsii.String("MyCfnRecordSetGroup"), &cfnRecordSetGroupProps{
	comment: jsii.String("comment"),
	hostedZoneId: jsii.String("hostedZoneId"),
	hostedZoneName: jsii.String("hostedZoneName"),
	recordSets: []interface{}{
		&recordSetProperty{
			name: jsii.String("name"),
			type: jsii.String("type"),

			// the properties below are optional
			aliasTarget: &aliasTargetProperty{
				dnsName: jsii.String("dnsName"),
				hostedZoneId: jsii.String("hostedZoneId"),

				// the properties below are optional
				evaluateTargetHealth: jsii.Boolean(false),
			},
			cidrRoutingConfig: &cidrRoutingConfigProperty{
				collectionId: jsii.String("collectionId"),
				locationName: jsii.String("locationName"),
			},
			failover: jsii.String("failover"),
			geoLocation: &geoLocationProperty{
				continentCode: jsii.String("continentCode"),
				countryCode: jsii.String("countryCode"),
				subdivisionCode: jsii.String("subdivisionCode"),
			},
			healthCheckId: jsii.String("healthCheckId"),
			hostedZoneId: jsii.String("hostedZoneId"),
			hostedZoneName: jsii.String("hostedZoneName"),
			multiValueAnswer: jsii.Boolean(false),
			region: jsii.String("region"),
			resourceRecords: []*string{
				jsii.String("resourceRecords"),
			},
			setIdentifier: jsii.String("setIdentifier"),
			ttl: jsii.String("ttl"),
			weight: jsii.Number(123),
		},
	},
})

func NewCfnRecordSetGroup 

func NewCfnRecordSetGroup(scope constructs.Construct, id *string, props *CfnRecordSetGroupProps) CfnRecordSetGroup

Create a new `AWS::Route53::RecordSetGroup`.

type CfnRecordSetGroupProps 

type CfnRecordSetGroupProps struct {
	// *Optional:* Any comments you want to include about a change batch request.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The ID of the hosted zone that you want to create records in.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneId *string `field:"optional" json:"hostedZoneId" yaml:"hostedZoneId"`
	// The name of the hosted zone that you want to create records in.
	//
	// You must include a trailing dot (for example, `www.example.com.` ) as part of the `HostedZoneName` .
	//
	// When you create a stack using an `AWS::Route53::RecordSet` that specifies `HostedZoneName` , AWS CloudFormation attempts to find a hosted zone whose name matches the `HostedZoneName` . If AWS CloudFormation can't find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneName *string `field:"optional" json:"hostedZoneName" yaml:"hostedZoneName"`
	// A complex type that contains one `RecordSet` element for each record that you want to create.
	RecordSets interface{} `field:"optional" json:"recordSets" yaml:"recordSets"`
}

Properties for defining a `CfnRecordSetGroup`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnRecordSetGroupProps := &cfnRecordSetGroupProps{
	comment: jsii.String("comment"),
	hostedZoneId: jsii.String("hostedZoneId"),
	hostedZoneName: jsii.String("hostedZoneName"),
	recordSets: []interface{}{
		&recordSetProperty{
			name: jsii.String("name"),
			type: jsii.String("type"),

			// the properties below are optional
			aliasTarget: &aliasTargetProperty{
				dnsName: jsii.String("dnsName"),
				hostedZoneId: jsii.String("hostedZoneId"),

				// the properties below are optional
				evaluateTargetHealth: jsii.Boolean(false),
			},
			cidrRoutingConfig: &cidrRoutingConfigProperty{
				collectionId: jsii.String("collectionId"),
				locationName: jsii.String("locationName"),
			},
			failover: jsii.String("failover"),
			geoLocation: &geoLocationProperty{
				continentCode: jsii.String("continentCode"),
				countryCode: jsii.String("countryCode"),
				subdivisionCode: jsii.String("subdivisionCode"),
			},
			healthCheckId: jsii.String("healthCheckId"),
			hostedZoneId: jsii.String("hostedZoneId"),
			hostedZoneName: jsii.String("hostedZoneName"),
			multiValueAnswer: jsii.Boolean(false),
			region: jsii.String("region"),
			resourceRecords: []*string{
				jsii.String("resourceRecords"),
			},
			setIdentifier: jsii.String("setIdentifier"),
			ttl: jsii.String("ttl"),
			weight: jsii.Number(123),
		},
	},
}

type CfnRecordSetGroup_AliasTargetProperty 

type CfnRecordSetGroup_AliasTargetProperty struct {
	// *Alias records only:* The value that you specify depends on where you want to route queries:.
	//
	// - **Amazon API Gateway custom regional APIs and edge-optimized APIs** - Specify the applicable domain name for your API. You can get the applicable value using the AWS CLI command [get-domain-names](https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html) :
	//
	// - For regional APIs, specify the value of `regionalDomainName` .
	// - For edge-optimized APIs, specify the value of `distributionDomainName` . This is the name of the associated CloudFront distribution, such as `da1b2c3d4e5.cloudfront.net` .
	//
	// > The name of the record that you're creating must match a custom domain name for your API, such as `api.example.com` .
	// - **Amazon Virtual Private Cloud interface VPC endpoint** - Enter the API endpoint for the interface endpoint, such as `vpce-123456789abcdef01-example-us-east-1a.elasticloadbalancing.us-east-1.vpce.amazonaws.com` . For edge-optimized APIs, this is the domain name for the corresponding CloudFront distribution. You can get the value of `DnsName` using the AWS CLI command [describe-vpc-endpoints](https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html) .
	// - **CloudFront distribution** - Specify the domain name that CloudFront assigned when you created your distribution.
	//
	// Your CloudFront distribution must include an alternate domain name that matches the name of the record. For example, if the name of the record is *acme.example.com* , your CloudFront distribution must include *acme.example.com* as one of the alternate domain names. For more information, see [Using Alternate Domain Names (CNAMEs)](https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html) in the *Amazon CloudFront Developer Guide* .
	//
	// You can't create a record in a private hosted zone to route traffic to a CloudFront distribution.
	//
	// > For failover alias records, you can't specify a CloudFront distribution for both the primary and secondary records. A distribution must include an alternate domain name that matches the name of the record. However, the primary and secondary records have the same name, and you can't include the same alternate domain name in more than one distribution.
	// - **Elastic Beanstalk environment** - If the domain name for your Elastic Beanstalk environment includes the region that you deployed the environment in, you can create an alias record that routes traffic to the environment. For example, the domain name `my-environment. *us-west-2* .elasticbeanstalk.com` is a regionalized domain name.
	//
	// > For environments that were created before early 2016, the domain name doesn't include the region. To route traffic to these environments, you must create a CNAME record instead of an alias record. Note that you can't create a CNAME record for the root domain name. For example, if your domain name is example.com, you can create a record that routes traffic for acme.example.com to your Elastic Beanstalk environment, but you can't create a record that routes traffic for example.com to your Elastic Beanstalk environment.
	//
	// For Elastic Beanstalk environments that have regionalized subdomains, specify the `CNAME` attribute for the environment. You can use the following methods to get the value of the CNAME attribute:
	//
	// - *AWS Management Console* : For information about how to get the value by using the console, see [Using Custom Domains with AWS Elastic Beanstalk](https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html) in the *AWS Elastic Beanstalk Developer Guide* .
	// - *Elastic Beanstalk API* : Use the `DescribeEnvironments` action to get the value of the `CNAME` attribute. For more information, see [DescribeEnvironments](https://docs.aws.amazon.com/elasticbeanstalk/latest/api/API_DescribeEnvironments.html) in the *AWS Elastic Beanstalk API Reference* .
	// - *AWS CLI* : Use the `describe-environments` command to get the value of the `CNAME` attribute. For more information, see [describe-environments](https://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html) in the *AWS CLI* .
	// - **ELB load balancer** - Specify the DNS name that is associated with the load balancer. Get the DNS name by using the AWS Management Console , the ELB API, or the AWS CLI .
	//
	// - *AWS Management Console* : Go to the EC2 page, choose *Load Balancers* in the navigation pane, choose the load balancer, choose the *Description* tab, and get the value of the *DNS name* field.
	//
	// If you're routing traffic to a Classic Load Balancer, get the value that begins with *dualstack* . If you're routing traffic to another type of load balancer, get the value that applies to the record type, A or AAAA.
	// - *Elastic Load Balancing API* : Use `DescribeLoadBalancers` to get the value of `DNSName` . For more information, see the applicable guide:
	//
	// - Classic Load Balancers: [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html)
	// - Application and Network Load Balancers: [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	// - *CloudFormation Fn::GetAtt intrinsic function* : Use the [Fn::GetAtt](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html) intrinsic function to get the value of `DNSName` :
	//
	// - [Classic Load Balancers](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values) .
	// - [Application and Network Load Balancers](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values) .
	// - *AWS CLI* : Use `describe-load-balancers` to get the value of `DNSName` . For more information, see the applicable guide:
	//
	// - Classic Load Balancers: [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	// - Application and Network Load Balancers: [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html)
	// - **Global Accelerator accelerator** - Specify the DNS name for your accelerator:
	//
	// - *Global Accelerator API* : To get the DNS name, use [DescribeAccelerator](https://docs.aws.amazon.com/global-accelerator/latest/api/API_DescribeAccelerator.html) .
	// - *AWS CLI* : To get the DNS name, use [describe-accelerator](https://docs.aws.amazon.com/cli/latest/reference/globalaccelerator/describe-accelerator.html) .
	// - **Amazon S3 bucket that is configured as a static website** - Specify the domain name of the Amazon S3 website endpoint that you created the bucket in, for example, `s3-website.us-east-2.amazonaws.com` . For more information about valid values, see the table [Amazon S3 Website Endpoints](https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints) in the *Amazon Web Services General Reference* . For more information about using S3 buckets for websites, see [Getting Started with Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/getting-started.html) in the *Amazon Route 53 Developer Guide.*
	// - **Another Route 53 record** - Specify the value of the `Name` element for a record in the current hosted zone.
	//
	// > If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't specify the domain name for a record for which the value of `Type` is `CNAME` . This is because the alias record must have the same type as the record that you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
	DnsName *string `field:"required" json:"dnsName" yaml:"dnsName"`
	// *Alias resource records sets only* : The value used depends on where you want to route traffic:.
	//
	// - **Amazon API Gateway custom regional APIs and edge-optimized APIs** - Specify the hosted zone ID for your API. You can get the applicable value using the AWS CLI command [get-domain-names](https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html) :
	//
	// - For regional APIs, specify the value of `regionalHostedZoneId` .
	// - For edge-optimized APIs, specify the value of `distributionHostedZoneId` .
	// - **Amazon Virtual Private Cloud interface VPC endpoint** - Specify the hosted zone ID for your interface endpoint. You can get the value of `HostedZoneId` using the AWS CLI command [describe-vpc-endpoints](https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html) .
	// - **CloudFront distribution** - Specify `Z2FDTNDATAQYW2` . This is always the hosted zone ID when you create an alias record that routes traffic to a CloudFront distribution.
	//
	// > Alias records for CloudFront can't be created in a private zone.
	// - **Elastic Beanstalk environment** - Specify the hosted zone ID for the region that you created the environment in. The environment must have a regionalized subdomain. For a list of regions and the corresponding hosted zone IDs, see [AWS Elastic Beanstalk endpoints and quotas](https://docs.aws.amazon.com/general/latest/gr/elasticbeanstalk.html) in the *Amazon Web Services General Reference* .
	// - **ELB load balancer** - Specify the value of the hosted zone ID for the load balancer. Use the following methods to get the hosted zone ID:
	//
	// - [Service Endpoints](https://docs.aws.amazon.com/general/latest/gr/elb.html) table in the "Elastic Load Balancing endpoints and quotas" topic in the *Amazon Web Services General Reference* : Use the value that corresponds with the region that you created your load balancer in. Note that there are separate columns for Application and Classic Load Balancers and for Network Load Balancers.
	// - *AWS Management Console* : Go to the Amazon EC2 page, choose *Load Balancers* in the navigation pane, select the load balancer, and get the value of the *Hosted zone* field on the *Description* tab.
	// - *Elastic Load Balancing API* : Use `DescribeLoadBalancers` to get the applicable value. For more information, see the applicable guide:
	//
	// - Classic Load Balancers: Use [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html) to get the value of `CanonicalHostedZoneNameID` .
	// - Application and Network Load Balancers: Use [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html) to get the value of `CanonicalHostedZoneID` .
	// - *CloudFormation Fn::GetAtt intrinsic function* : Use the [Fn::GetAtt](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html) intrinsic function to get the applicable value:
	//
	// - Classic Load Balancers: Get [CanonicalHostedZoneNameID](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values) .
	// - Application and Network Load Balancers: Get [CanonicalHostedZoneID](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values) .
	// - *AWS CLI* : Use `describe-load-balancers` to get the applicable value. For more information, see the applicable guide:
	//
	// - Classic Load Balancers: Use [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html) to get the value of `CanonicalHostedZoneNameID` .
	// - Application and Network Load Balancers: Use [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html) to get the value of `CanonicalHostedZoneID` .
	// - **Global Accelerator accelerator** - Specify `Z2BJ6XQ5FK7U4H` .
	// - **An Amazon S3 bucket configured as a static website** - Specify the hosted zone ID for the region that you created the bucket in. For more information about valid values, see the table [Amazon S3 Website Endpoints](https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints) in the *Amazon Web Services General Reference* .
	// - **Another Route 53 record in your hosted zone** - Specify the hosted zone ID of your hosted zone. (An alias record can't reference a record in a different hosted zone.)
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
	// *Applies only to alias records with any routing policy:* When `EvaluateTargetHealth` is `true` , an alias record inherits the health of the referenced AWS resource, such as an ELB load balancer or another record in the hosted zone.
	//
	// Note the following:
	//
	// - **CloudFront distributions** - You can't set `EvaluateTargetHealth` to `true` when the alias target is a CloudFront distribution.
	// - **Elastic Beanstalk environments that have regionalized subdomains** - If you specify an Elastic Beanstalk environment in `DNSName` and the environment contains an ELB load balancer, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. (An environment automatically contains an ELB load balancer if it includes more than one Amazon EC2 instance.) If you set `EvaluateTargetHealth` to `true` and either no Amazon EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other available resources that are healthy, if any.
	//
	// If the environment contains a single Amazon EC2 instance, there are no special requirements.
	// - **ELB load balancers** - Health checking behavior depends on the type of load balancer:
	//
	// - *Classic Load Balancers* : If you specify an ELB Classic Load Balancer in `DNSName` , Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. If you set `EvaluateTargetHealth` to `true` and either no EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other resources.
	// - *Application and Network Load Balancers* : If you specify an ELB Application or Network Load Balancer and you set `EvaluateTargetHealth` to `true` , Route 53 routes queries to the load balancer based on the health of the target groups that are associated with the load balancer:
	//
	// - For an Application or Network Load Balancer to be considered healthy, every target group that contains targets must contain at least one healthy target. If any target group contains only unhealthy targets, the load balancer is considered unhealthy, and Route 53 routes queries to other resources.
	// - A target group that has no registered targets is considered unhealthy.
	//
	// > When you create a load balancer, you configure settings for Elastic Load Balancing health checks; they're not Route 53 health checks, but they perform a similar function. Do not create Route 53 health checks for the EC2 instances that you register with an ELB load balancer.
	// - **S3 buckets** - There are no special requirements for setting `EvaluateTargetHealth` to `true` when the alias target is an S3 bucket.
	// - **Other records in the same hosted zone** - If the AWS resource that you specify in `DNSName` is a record or a group of records (for example, a group of weighted records) but is not another alias record, we recommend that you associate a health check with all of the records in the alias target. For more information, see [What Happens When You Omit Health Checks?](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting) in the *Amazon Route 53 Developer Guide* .
	//
	// For more information and examples, see [Amazon Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the *Amazon Route 53 Developer Guide* .
	EvaluateTargetHealth interface{} `field:"optional" json:"evaluateTargetHealth" yaml:"evaluateTargetHealth"`
}

*Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to.

When creating records for a private hosted zone, note the following:

- Creating geolocation alias and latency alias records in a private hosted zone is allowed but not supported. - For information about creating failover records in a private hosted zone, see [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html) .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

aliasTargetProperty := &aliasTargetProperty{
	dnsName: jsii.String("dnsName"),
	hostedZoneId: jsii.String("hostedZoneId"),

	// the properties below are optional
	evaluateTargetHealth: jsii.Boolean(false),
}

type CfnRecordSetGroup_CidrRoutingConfigProperty added in v2.31.0 

type CfnRecordSetGroup_CidrRoutingConfigProperty struct {
	// `CfnRecordSetGroup.CidrRoutingConfigProperty.CollectionId`.
	CollectionId *string `field:"required" json:"collectionId" yaml:"collectionId"`
	// `CfnRecordSetGroup.CidrRoutingConfigProperty.LocationName`.
	LocationName *string `field:"required" json:"locationName" yaml:"locationName"`
}

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cidrRoutingConfigProperty := &cidrRoutingConfigProperty{
	collectionId: jsii.String("collectionId"),
	locationName: jsii.String("locationName"),
}

type CfnRecordSetGroup_GeoLocationProperty 

type CfnRecordSetGroup_GeoLocationProperty struct {
	// For geolocation resource record sets, a two-letter abbreviation that identifies a continent. Route 53 supports the following continent codes:.
	//
	// - *AF* : Africa
	// - *AN* : Antarctica
	// - *AS* : Asia
	// - *EU* : Europe
	// - *OC* : Oceania
	// - *NA* : North America
	// - *SA* : South America
	//
	// Constraint: Specifying `ContinentCode` with either `CountryCode` or `SubdivisionCode` returns an `InvalidInput` error.
	ContinentCode *string `field:"optional" json:"continentCode" yaml:"continentCode"`
	// For geolocation resource record sets, the two-letter code for a country.
	//
	// Route 53 uses the two-letter country codes that are specified in [ISO standard 3166-1 alpha-2](https://docs.aws.amazon.com/https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2) .
	CountryCode *string `field:"optional" json:"countryCode" yaml:"countryCode"`
	// For geolocation resource record sets, the two-letter code for a state of the United States.
	//
	// Route 53 doesn't support any other values for `SubdivisionCode` . For a list of state abbreviations, see [Appendix B: Two–Letter State and Possession Abbreviations](https://docs.aws.amazon.com/https://pe.usps.com/text/pub28/28apb.htm) on the United States Postal Service website.
	//
	// If you specify `subdivisioncode` , you must also specify `US` for `CountryCode` .
	SubdivisionCode *string `field:"optional" json:"subdivisionCode" yaml:"subdivisionCode"`
}

A complex type that contains information about a geographic location.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

geoLocationProperty := &geoLocationProperty{
	continentCode: jsii.String("continentCode"),
	countryCode: jsii.String("countryCode"),
	subdivisionCode: jsii.String("subdivisionCode"),
}

type CfnRecordSetGroup_RecordSetProperty 

type CfnRecordSetGroup_RecordSetProperty struct {
	// For `ChangeResourceRecordSets` requests, the name of the record that you want to create, update, or delete.
	//
	// For `ListResourceRecordSets` responses, the name of a record in the specified hosted zone.
	//
	// *ChangeResourceRecordSets Only*
	//
	// Enter a fully qualified domain name, for example, `www.example.com` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats `www.example.com` (without a trailing dot) and `www.example.com.` (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than `a-z` , `0-9` , and `-` (hyphen) and how to specify internationalized domain names, see [DNS Domain Name Format](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the *Amazon Route 53 Developer Guide* .
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, `*.example.com` . Note the following:
	//
	// - The * must replace the entire label. For example, you can't specify `*prod.example.com` or `prod*.example.com` .
	// - The * can't replace any of the middle labels, for example, marketing.*.example.com.
	// - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	// > You can't use the * wildcard for resource records sets that have a type of NS.
	//
	// You can use the * wildcard as the leftmost label in a domain name, for example, `*.example.com` . You can't use an * for one of the middle labels, for example, `marketing.*.example.com` . In addition, the * must replace the entire label; for example, you can't specify `prod*.example.com` .
	Name *string `field:"required" json:"name" yaml:"name"`
	// The DNS record type.
	//
	// For information about different record types and how data is encoded for them, see [Supported DNS Resource Record Types](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html) in the *Amazon Route 53 Developer Guide* .
	//
	// Valid values for basic resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `DS` | `MX` | `NAPTR` | `NS` | `PTR` | `SOA` | `SPF` | `SRV` | `TXT`
	//
	// Values for weighted, latency, geolocation, and failover resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
	//
	// Valid values for multivalue answer resource record sets: `A` | `AAAA` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT`
	//
	// > SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of `Type` is `SPF` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, [The SPF DNS Record Type](https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1) .
	//
	// Values for alias resource record sets:
	//
	// - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* `A`
	// - *CloudFront distributions:* `A`
	//
	// If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of `A` and one with a value of `AAAA` .
	// - *Amazon API Gateway environment that has a regionalized subdomain* : `A`
	// - *ELB load balancers:* `A` | `AAAA`
	// - *Amazon S3 buckets:* `A`
	// - *Amazon Virtual Private Cloud interface VPC endpoints* `A`
	// - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except `NS` and `SOA` .
	//
	// > If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of `Type` is `CNAME` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
	Type *string `field:"required" json:"type" yaml:"type"`
	// *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to.
	//
	// If you're creating resource records sets for a private hosted zone, note the following:
	//
	// - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution.
	// - Creating geolocation alias resource record sets or latency alias resource record sets in a private hosted zone is unsupported.
	// - For information about creating failover resource record sets in a private hosted zone, see [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html) in the *Amazon Route 53 Developer Guide* .
	AliasTarget interface{} `field:"optional" json:"aliasTarget" yaml:"aliasTarget"`
	// `CfnRecordSetGroup.RecordSetProperty.CidrRoutingConfig`.
	CidrRoutingConfig interface{} `field:"optional" json:"cidrRoutingConfig" yaml:"cidrRoutingConfig"`
	// *Failover resource record sets only:* To configure failover, you add the `Failover` element to two resource record sets.
	//
	// For one resource record set, you specify `PRIMARY` as the value for `Failover` ; for the other resource record set, you specify `SECONDARY` . In addition, you include the `HealthCheckId` element and specify the health check that you want Amazon Route 53 to perform for each resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have included the `HealthCheckId` element in both resource record sets:
	//
	// - When the primary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set.
	// - When the primary resource record set is unhealthy and the secondary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the secondary resource record set.
	// - When the secondary resource record set is unhealthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set.
	// - If you omit the `HealthCheckId` element for the secondary resource record set, and if the primary resource record set is unhealthy, Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint.
	//
	// You can't create non-failover resource record sets that have the same values for the `Name` and `Type` elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the `EvaluateTargetHealth` element and set the value to true.
	//
	// For more information about configuring failover for Route 53, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	Failover *string `field:"optional" json:"failover" yaml:"failover"`
	// *Geolocation resource record sets only:* A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
	//
	// For example, if you want all queries from Africa to be routed to a web server with an IP address of `192.0.2.111` , create a resource record set with a `Type` of `A` and a `ContinentCode` of `AF` .
	//
	// > Although creating geolocation and geolocation alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource.
	//
	// You can't create two geolocation resource record sets that specify the same geographic location.
	//
	// The value `*` in the `CountryCode` element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the `Name` and `Type` elements.
	//
	// > Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of `CountryCode` is `*` . Two groups of queries are routed to the resource that you specify in this record: queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a `*` resource record set, Route 53 returns a "no answer" response for queries from those locations.
	//
	// You can't create non-geolocation resource record sets that have the same values for the `Name` and `Type` elements as geolocation resource record sets.
	GeoLocation interface{} `field:"optional" json:"geoLocation" yaml:"geoLocation"`
	// If you want Amazon Route 53 to return this resource record set in response to a DNS query only when the status of a health check is healthy, include the `HealthCheckId` element and specify the ID of the applicable health check.
	//
	// Route 53 determines whether a resource record set is healthy based on one of the following:
	//
	// - By periodically sending a request to the endpoint that is specified in the health check
	// - By aggregating the status of a specified group of health checks (calculated health checks)
	// - By determining the current state of a CloudWatch alarm (CloudWatch metric health checks)
	//
	// > Route 53 doesn't check the health of the endpoint that is specified in the resource record set, for example, the endpoint specified by the IP address in the `Value` element. When you add a `HealthCheckId` element to a resource record set, Route 53 checks the health of the endpoint that you specified in the health check.
	//
	// For more information, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//
	// *When to Specify HealthCheckId*
	//
	// Specifying a value for `HealthCheckId` is useful only when Route 53 is choosing between two or more resource record sets to respond to a DNS query, and you want Route 53 to base the choice in part on the status of a health check. Configuring health checks makes sense only in the following configurations:
	//
	// - *Non-alias resource record sets* : You're checking the health of a group of non-alias resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A) and you specify health check IDs for all the resource record sets.
	//
	// If the health check status for a resource record set is healthy, Route 53 includes the record among the records that it responds to DNS queries with.
	//
	// If the health check status for a resource record set is unhealthy, Route 53 stops responding to DNS queries using the value for that resource record set.
	//
	// If the health check status for all resource record sets in the group is unhealthy, Route 53 considers all resource record sets in the group healthy and responds to DNS queries accordingly.
	// - *Alias resource record sets* : You specify the following settings:
	//
	// - You set `EvaluateTargetHealth` to true for an alias resource record set in a group of resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A).
	// - You configure the alias resource record set to route traffic to a non-alias resource record set in the same hosted zone.
	// - You specify a health check ID for the non-alias resource record set.
	//
	// If the health check status is healthy, Route 53 considers the alias resource record set to be healthy and includes the alias record among the records that it responds to DNS queries with.
	//
	// If the health check status is unhealthy, Route 53 stops responding to DNS queries using the alias resource record set.
	//
	// > The alias resource record set can also route traffic to a *group* of non-alias resource record sets that have the same routing policy, name, and type. In that configuration, associate health checks with all of the resource record sets in the group of non-alias resource record sets.
	//
	// *Geolocation Routing*
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Route 53 looks for a resource record set for the larger, associated geographic region. For example, suppose you have resource record sets for a state in the United States, for the entire United States, for North America, and a resource record set that has `*` for `CountryCode` is `*` , which applies to all locations. If the endpoint for the state resource record set is unhealthy, Route 53 checks for healthy resource record sets in the following order until it finds a resource record set for which the endpoint is healthy:
	//
	// - The United States
	// - North America
	// - The default resource record set
	//
	// *Specifying the Health Check Endpoint by Domain Name*
	//
	// If your health checks specify the endpoint only by domain name, we recommend that you create a separate health check for each endpoint. For example, create a health check for each `HTTP` server that is serving content for `www.example.com` . For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as `us-east-2-www.example.com` ), not the name of the resource record sets ( `www.example.com` ).
	//
	// > Health check results will be unpredictable if you do the following:
	// >
	// > - Create a health check that has the same value for `FullyQualifiedDomainName` as the name of a resource record set.
	// > - Associate that health check with the resource record set.
	HealthCheckId *string `field:"optional" json:"healthCheckId" yaml:"healthCheckId"`
	// The ID of the hosted zone that you want to create records in.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneId *string `field:"optional" json:"hostedZoneId" yaml:"hostedZoneId"`
	// The name of the hosted zone that you want to create records in.
	//
	// You must include a trailing dot (for example, `www.example.com.` ) as part of the `HostedZoneName` .
	//
	// When you create a stack using an `AWS::Route53::RecordSet` that specifies `HostedZoneName` , AWS CloudFormation attempts to find a hosted zone whose name matches the `HostedZoneName` . If AWS CloudFormation can't find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneName *string `field:"optional" json:"hostedZoneName" yaml:"hostedZoneName"`
	// *Multivalue answer resource record sets only* : To route traffic approximately randomly to multiple resources, such as web servers, create one multivalue answer record for each resource and specify `true` for `MultiValueAnswer` .
	//
	// Note the following:
	//
	// - If you associate a health check with a multivalue answer resource record set, Amazon Route 53 responds to DNS queries with the corresponding IP address only when the health check is healthy.
	// - If you don't associate a health check with a multivalue answer record, Route 53 always considers the record to be healthy.
	// - Route 53 responds to DNS queries with up to eight healthy records; if you have eight or fewer healthy records, Route 53 responds to all DNS queries with all the healthy records.
	// - If you have more than eight healthy records, Route 53 responds to different DNS resolvers with different combinations of healthy records.
	// - When all records are unhealthy, Route 53 responds to DNS queries with up to eight unhealthy records.
	// - If a resource becomes unavailable after a resolver caches a response, client software typically tries another of the IP addresses in the response.
	//
	// You can't create multivalue answer alias records.
	MultiValueAnswer interface{} `field:"optional" json:"multiValueAnswer" yaml:"multiValueAnswer"`
	// *Latency-based resource record sets only:* The Amazon EC2 Region where you created the resource that this resource record set refers to.
	//
	// The resource typically is an AWS resource, such as an EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type.
	//
	// > Although creating latency and latency alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 Region. Route 53 then returns the value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	// - You can only specify one `ResourceRecord` per latency resource record set.
	// - You can only create one latency resource record set for each Amazon EC2 Region.
	// - You aren't required to create latency resource record sets for all Amazon EC2 Regions. Route 53 will choose the region with the best latency from among the regions that you create latency resource record sets for.
	// - You can't create non-latency resource record sets that have the same values for the `Name` and `Type` elements as latency resource record sets.
	Region *string `field:"optional" json:"region" yaml:"region"`
	// Information about the records that you want to create.
	//
	// Each record should be in the format appropriate for the record type specified by the `Type` property. For information about different record types and their record formats, see [Values That You Specify When You Create or Edit Amazon Route 53 Records](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/resource-record-sets-values.html) in the *Amazon Route 53 Developer Guide* .
	ResourceRecords *[]*string `field:"optional" json:"resourceRecords" yaml:"resourceRecords"`
	// *Resource record sets that have a routing policy other than simple:* An identifier that differentiates among multiple resource record sets that have the same combination of name and type, such as multiple weighted resource record sets named acme.example.com that have a type of A. In a group of resource record sets that have the same name and type, the value of `SetIdentifier` must be unique for each resource record set.
	//
	// For information about routing policies, see [Choosing a Routing Policy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html) in the *Amazon Route 53 Developer Guide* .
	SetIdentifier *string `field:"optional" json:"setIdentifier" yaml:"setIdentifier"`
	// The resource record cache time to live (TTL), in seconds. Note the following:.
	//
	// - If you're creating or updating an alias resource record set, omit `TTL` . Amazon Route 53 uses the value of `TTL` for the alias target.
	// - If you're associating this resource record set with a health check (if you're adding a `HealthCheckId` element), we recommend that you specify a `TTL` of 60 seconds or less so clients respond quickly to changes in health status.
	// - All of the resource record sets in a group of weighted resource record sets must have the same value for `TTL` .
	// - If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a `TTL` of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for `Weight` .
	Ttl *string `field:"optional" json:"ttl" yaml:"ttl"`
	// *Weighted resource record sets only:* Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.
	//
	// Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following:
	//
	// - You must specify a value for the `Weight` element for every weighted resource record set.
	// - You can only specify one `ResourceRecord` per weighted resource record set.
	// - You can't create latency, failover, or geolocation resource record sets that have the same values for the `Name` and `Type` elements as weighted resource record sets.
	// - You can create a maximum of 100 weighted resource record sets that have the same values for the `Name` and `Type` elements.
	// - For weighted (but not weighted alias) resource record sets, if you set `Weight` to `0` for a resource record set, Route 53 never responds to queries with the applicable value for that resource record set. However, if you set `Weight` to `0` for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability.
	//
	// The effect of setting `Weight` to `0` is different when you associate health checks with weighted resource record sets. For more information, see [Options for Configuring Route 53 Active-Active and Active-Passive Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html) in the *Amazon Route 53 Developer Guide* .
	Weight *float64 `field:"optional" json:"weight" yaml:"weight"`
}

Information about one record that you want to create.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

recordSetProperty := &recordSetProperty{
	name: jsii.String("name"),
	type: jsii.String("type"),

	// the properties below are optional
	aliasTarget: &aliasTargetProperty{
		dnsName: jsii.String("dnsName"),
		hostedZoneId: jsii.String("hostedZoneId"),

		// the properties below are optional
		evaluateTargetHealth: jsii.Boolean(false),
	},
	cidrRoutingConfig: &cidrRoutingConfigProperty{
		collectionId: jsii.String("collectionId"),
		locationName: jsii.String("locationName"),
	},
	failover: jsii.String("failover"),
	geoLocation: &geoLocationProperty{
		continentCode: jsii.String("continentCode"),
		countryCode: jsii.String("countryCode"),
		subdivisionCode: jsii.String("subdivisionCode"),
	},
	healthCheckId: jsii.String("healthCheckId"),
	hostedZoneId: jsii.String("hostedZoneId"),
	hostedZoneName: jsii.String("hostedZoneName"),
	multiValueAnswer: jsii.Boolean(false),
	region: jsii.String("region"),
	resourceRecords: []*string{
		jsii.String("resourceRecords"),
	},
	setIdentifier: jsii.String("setIdentifier"),
	ttl: jsii.String("ttl"),
	weight: jsii.Number(123),
}

type CfnRecordSetProps 

type CfnRecordSetProps struct {
	// For `ChangeResourceRecordSets` requests, the name of the record that you want to create, update, or delete.
	//
	// For `ListResourceRecordSets` responses, the name of a record in the specified hosted zone.
	//
	// *ChangeResourceRecordSets Only*
	//
	// Enter a fully qualified domain name, for example, `www.example.com` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats `www.example.com` (without a trailing dot) and `www.example.com.` (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than `a-z` , `0-9` , and `-` (hyphen) and how to specify internationalized domain names, see [DNS Domain Name Format](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the *Amazon Route 53 Developer Guide* .
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, `*.example.com` . Note the following:
	//
	// - The * must replace the entire label. For example, you can't specify `*prod.example.com` or `prod*.example.com` .
	// - The * can't replace any of the middle labels, for example, marketing.*.example.com.
	// - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	// > You can't use the * wildcard for resource records sets that have a type of NS.
	//
	// You can use the * wildcard as the leftmost label in a domain name, for example, `*.example.com` . You can't use an * for one of the middle labels, for example, `marketing.*.example.com` . In addition, the * must replace the entire label; for example, you can't specify `prod*.example.com` .
	Name *string `field:"required" json:"name" yaml:"name"`
	// The DNS record type.
	//
	// For information about different record types and how data is encoded for them, see [Supported DNS Resource Record Types](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html) in the *Amazon Route 53 Developer Guide* .
	//
	// Valid values for basic resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `DS` | `MX` | `NAPTR` | `NS` | `PTR` | `SOA` | `SPF` | `SRV` | `TXT`
	//
	// Values for weighted, latency, geolocation, and failover resource record sets: `A` | `AAAA` | `CAA` | `CNAME` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.
	//
	// Valid values for multivalue answer resource record sets: `A` | `AAAA` | `MX` | `NAPTR` | `PTR` | `SPF` | `SRV` | `TXT`
	//
	// > SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of `Type` is `SPF` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, [The SPF DNS Record Type](https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1) .
	//
	// Values for alias resource record sets:
	//
	// - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* `A`
	// - *CloudFront distributions:* `A`
	//
	// If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of `A` and one with a value of `AAAA` .
	// - *Amazon API Gateway environment that has a regionalized subdomain* : `A`
	// - *ELB load balancers:* `A` | `AAAA`
	// - *Amazon S3 buckets:* `A`
	// - *Amazon Virtual Private Cloud interface VPC endpoints* `A`
	// - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except `NS` and `SOA` .
	//
	// > If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of `Type` is `CNAME` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
	Type *string `field:"required" json:"type" yaml:"type"`
	// *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to.
	//
	// If you're creating resource records sets for a private hosted zone, note the following:
	//
	// - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution.
	// - Creating geolocation alias resource record sets or latency alias resource record sets in a private hosted zone is unsupported.
	// - For information about creating failover resource record sets in a private hosted zone, see [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html) in the *Amazon Route 53 Developer Guide* .
	AliasTarget interface{} `field:"optional" json:"aliasTarget" yaml:"aliasTarget"`
	// `AWS::Route53::RecordSet.CidrRoutingConfig`.
	CidrRoutingConfig interface{} `field:"optional" json:"cidrRoutingConfig" yaml:"cidrRoutingConfig"`
	// *Optional:* Any comments you want to include about a change batch request.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// *Failover resource record sets only:* To configure failover, you add the `Failover` element to two resource record sets.
	//
	// For one resource record set, you specify `PRIMARY` as the value for `Failover` ; for the other resource record set, you specify `SECONDARY` . In addition, you include the `HealthCheckId` element and specify the health check that you want Amazon Route 53 to perform for each resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have included the `HealthCheckId` element in both resource record sets:
	//
	// - When the primary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set.
	// - When the primary resource record set is unhealthy and the secondary resource record set is healthy, Route 53 responds to DNS queries with the applicable value from the secondary resource record set.
	// - When the secondary resource record set is unhealthy, Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set.
	// - If you omit the `HealthCheckId` element for the secondary resource record set, and if the primary resource record set is unhealthy, Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint.
	//
	// You can't create non-failover resource record sets that have the same values for the `Name` and `Type` elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the `EvaluateTargetHealth` element and set the value to true.
	//
	// For more information about configuring failover for Route 53, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	Failover *string `field:"optional" json:"failover" yaml:"failover"`
	// *Geolocation resource record sets only:* A complex type that lets you control how Amazon Route 53 responds to DNS queries based on the geographic origin of the query.
	//
	// For example, if you want all queries from Africa to be routed to a web server with an IP address of `192.0.2.111` , create a resource record set with a `Type` of `A` and a `ContinentCode` of `AF` .
	//
	// > Although creating geolocation and geolocation alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource.
	//
	// You can't create two geolocation resource record sets that specify the same geographic location.
	//
	// The value `*` in the `CountryCode` element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the `Name` and `Type` elements.
	//
	// > Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of `CountryCode` is `*` . Two groups of queries are routed to the resource that you specify in this record: queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a `*` resource record set, Route 53 returns a "no answer" response for queries from those locations.
	//
	// You can't create non-geolocation resource record sets that have the same values for the `Name` and `Type` elements as geolocation resource record sets.
	GeoLocation interface{} `field:"optional" json:"geoLocation" yaml:"geoLocation"`
	// If you want Amazon Route 53 to return this resource record set in response to a DNS query only when the status of a health check is healthy, include the `HealthCheckId` element and specify the ID of the applicable health check.
	//
	// Route 53 determines whether a resource record set is healthy based on one of the following:
	//
	// - By periodically sending a request to the endpoint that is specified in the health check
	// - By aggregating the status of a specified group of health checks (calculated health checks)
	// - By determining the current state of a CloudWatch alarm (CloudWatch metric health checks)
	//
	// > Route 53 doesn't check the health of the endpoint that is specified in the resource record set, for example, the endpoint specified by the IP address in the `Value` element. When you add a `HealthCheckId` element to a resource record set, Route 53 checks the health of the endpoint that you specified in the health check.
	//
	// For more information, see the following topics in the *Amazon Route 53 Developer Guide* :
	//
	// - [How Amazon Route 53 Determines Whether an Endpoint Is Healthy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// - [Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// - [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//
	// *When to Specify HealthCheckId*
	//
	// Specifying a value for `HealthCheckId` is useful only when Route 53 is choosing between two or more resource record sets to respond to a DNS query, and you want Route 53 to base the choice in part on the status of a health check. Configuring health checks makes sense only in the following configurations:
	//
	// - *Non-alias resource record sets* : You're checking the health of a group of non-alias resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A) and you specify health check IDs for all the resource record sets.
	//
	// If the health check status for a resource record set is healthy, Route 53 includes the record among the records that it responds to DNS queries with.
	//
	// If the health check status for a resource record set is unhealthy, Route 53 stops responding to DNS queries using the value for that resource record set.
	//
	// If the health check status for all resource record sets in the group is unhealthy, Route 53 considers all resource record sets in the group healthy and responds to DNS queries accordingly.
	// - *Alias resource record sets* : You specify the following settings:
	//
	// - You set `EvaluateTargetHealth` to true for an alias resource record set in a group of resource record sets that have the same routing policy, name, and type (such as multiple weighted records named www.example.com with a type of A).
	// - You configure the alias resource record set to route traffic to a non-alias resource record set in the same hosted zone.
	// - You specify a health check ID for the non-alias resource record set.
	//
	// If the health check status is healthy, Route 53 considers the alias resource record set to be healthy and includes the alias record among the records that it responds to DNS queries with.
	//
	// If the health check status is unhealthy, Route 53 stops responding to DNS queries using the alias resource record set.
	//
	// > The alias resource record set can also route traffic to a *group* of non-alias resource record sets that have the same routing policy, name, and type. In that configuration, associate health checks with all of the resource record sets in the group of non-alias resource record sets.
	//
	// *Geolocation Routing*
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Route 53 looks for a resource record set for the larger, associated geographic region. For example, suppose you have resource record sets for a state in the United States, for the entire United States, for North America, and a resource record set that has `*` for `CountryCode` is `*` , which applies to all locations. If the endpoint for the state resource record set is unhealthy, Route 53 checks for healthy resource record sets in the following order until it finds a resource record set for which the endpoint is healthy:
	//
	// - The United States
	// - North America
	// - The default resource record set
	//
	// *Specifying the Health Check Endpoint by Domain Name*
	//
	// If your health checks specify the endpoint only by domain name, we recommend that you create a separate health check for each endpoint. For example, create a health check for each `HTTP` server that is serving content for `www.example.com` . For the value of `FullyQualifiedDomainName` , specify the domain name of the server (such as `us-east-2-www.example.com` ), not the name of the resource record sets ( `www.example.com` ).
	//
	// > Health check results will be unpredictable if you do the following:
	// >
	// > - Create a health check that has the same value for `FullyQualifiedDomainName` as the name of a resource record set.
	// > - Associate that health check with the resource record set.
	HealthCheckId *string `field:"optional" json:"healthCheckId" yaml:"healthCheckId"`
	// The ID of the hosted zone that you want to create records in.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneId *string `field:"optional" json:"hostedZoneId" yaml:"hostedZoneId"`
	// The name of the hosted zone that you want to create records in.
	//
	// You must include a trailing dot (for example, `www.example.com.` ) as part of the `HostedZoneName` .
	//
	// When you create a stack using an AWS::Route53::RecordSet that specifies `HostedZoneName` , AWS CloudFormation attempts to find a hosted zone whose name matches the HostedZoneName. If AWS CloudFormation cannot find a hosted zone with a matching domain name, or if there is more than one hosted zone with the specified domain name, AWS CloudFormation will not create the stack.
	//
	// Specify either `HostedZoneName` or `HostedZoneId` , but not both. If you have multiple hosted zones with the same domain name, you must specify the hosted zone using `HostedZoneId` .
	HostedZoneName *string `field:"optional" json:"hostedZoneName" yaml:"hostedZoneName"`
	// *Multivalue answer resource record sets only* : To route traffic approximately randomly to multiple resources, such as web servers, create one multivalue answer record for each resource and specify `true` for `MultiValueAnswer` .
	//
	// Note the following:
	//
	// - If you associate a health check with a multivalue answer resource record set, Amazon Route 53 responds to DNS queries with the corresponding IP address only when the health check is healthy.
	// - If you don't associate a health check with a multivalue answer record, Route 53 always considers the record to be healthy.
	// - Route 53 responds to DNS queries with up to eight healthy records; if you have eight or fewer healthy records, Route 53 responds to all DNS queries with all the healthy records.
	// - If you have more than eight healthy records, Route 53 responds to different DNS resolvers with different combinations of healthy records.
	// - When all records are unhealthy, Route 53 responds to DNS queries with up to eight unhealthy records.
	// - If a resource becomes unavailable after a resolver caches a response, client software typically tries another of the IP addresses in the response.
	//
	// You can't create multivalue answer alias records.
	MultiValueAnswer interface{} `field:"optional" json:"multiValueAnswer" yaml:"multiValueAnswer"`
	// *Latency-based resource record sets only:* The Amazon EC2 Region where you created the resource that this resource record set refers to.
	//
	// The resource typically is an AWS resource, such as an EC2 instance or an ELB load balancer, and is referred to by an IP address or a DNS domain name, depending on the record type.
	//
	// > Although creating latency and latency alias resource record sets in a private hosted zone is allowed, it's not supported.
	//
	// When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 Region. Route 53 then returns the value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	// - You can only specify one `ResourceRecord` per latency resource record set.
	// - You can only create one latency resource record set for each Amazon EC2 Region.
	// - You aren't required to create latency resource record sets for all Amazon EC2 Regions. Route 53 will choose the region with the best latency from among the regions that you create latency resource record sets for.
	// - You can't create non-latency resource record sets that have the same values for the `Name` and `Type` elements as latency resource record sets.
	Region *string `field:"optional" json:"region" yaml:"region"`
	// One or more values that correspond with the value that you specified for the `Type` property.
	//
	// For example, if you specified `A` for `Type` , you specify one or more IP addresses in IPv4 format for `ResourceRecords` . For information about the format of values for each record type, see [Supported DNS Resource Record Types](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html) in the *Amazon Route 53 Developer Guide* .
	//
	// Note the following:
	//
	// - You can specify more than one value for all record types except CNAME and SOA.
	// - The maximum length of a value is 4000 characters.
	// - If you're creating an alias record, omit `ResourceRecords` .
	ResourceRecords *[]*string `field:"optional" json:"resourceRecords" yaml:"resourceRecords"`
	// *Resource record sets that have a routing policy other than simple:* An identifier that differentiates among multiple resource record sets that have the same combination of name and type, such as multiple weighted resource record sets named acme.example.com that have a type of A. In a group of resource record sets that have the same name and type, the value of `SetIdentifier` must be unique for each resource record set.
	//
	// For information about routing policies, see [Choosing a Routing Policy](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html) in the *Amazon Route 53 Developer Guide* .
	SetIdentifier *string `field:"optional" json:"setIdentifier" yaml:"setIdentifier"`
	// The resource record cache time to live (TTL), in seconds. Note the following:.
	//
	// - If you're creating or updating an alias resource record set, omit `TTL` . Amazon Route 53 uses the value of `TTL` for the alias target.
	// - If you're associating this resource record set with a health check (if you're adding a `HealthCheckId` element), we recommend that you specify a `TTL` of 60 seconds or less so clients respond quickly to changes in health status.
	// - All of the resource record sets in a group of weighted resource record sets must have the same value for `TTL` .
	// - If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a `TTL` of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for `Weight` .
	Ttl *string `field:"optional" json:"ttl" yaml:"ttl"`
	// *Weighted resource record sets only:* Among resource record sets that have the same combination of DNS name and type, a value that determines the proportion of DNS queries that Amazon Route 53 responds to using the current resource record set.
	//
	// Route 53 calculates the sum of the weights for the resource record sets that have the same combination of DNS name and type. Route 53 then responds to queries based on the ratio of a resource's weight to the total. Note the following:
	//
	// - You must specify a value for the `Weight` element for every weighted resource record set.
	// - You can only specify one `ResourceRecord` per weighted resource record set.
	// - You can't create latency, failover, or geolocation resource record sets that have the same values for the `Name` and `Type` elements as weighted resource record sets.
	// - You can create a maximum of 100 weighted resource record sets that have the same values for the `Name` and `Type` elements.
	// - For weighted (but not weighted alias) resource record sets, if you set `Weight` to `0` for a resource record set, Route 53 never responds to queries with the applicable value for that resource record set. However, if you set `Weight` to `0` for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability.
	//
	// The effect of setting `Weight` to `0` is different when you associate health checks with weighted resource record sets. For more information, see [Options for Configuring Route 53 Active-Active and Active-Passive Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html) in the *Amazon Route 53 Developer Guide* .
	Weight *float64 `field:"optional" json:"weight" yaml:"weight"`
}

Properties for defining a `CfnRecordSet`.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cfnRecordSetProps := &cfnRecordSetProps{
	name: jsii.String("name"),
	type: jsii.String("type"),

	// the properties below are optional
	aliasTarget: &aliasTargetProperty{
		dnsName: jsii.String("dnsName"),
		hostedZoneId: jsii.String("hostedZoneId"),

		// the properties below are optional
		evaluateTargetHealth: jsii.Boolean(false),
	},
	cidrRoutingConfig: &cidrRoutingConfigProperty{
		collectionId: jsii.String("collectionId"),
		locationName: jsii.String("locationName"),
	},
	comment: jsii.String("comment"),
	failover: jsii.String("failover"),
	geoLocation: &geoLocationProperty{
		continentCode: jsii.String("continentCode"),
		countryCode: jsii.String("countryCode"),
		subdivisionCode: jsii.String("subdivisionCode"),
	},
	healthCheckId: jsii.String("healthCheckId"),
	hostedZoneId: jsii.String("hostedZoneId"),
	hostedZoneName: jsii.String("hostedZoneName"),
	multiValueAnswer: jsii.Boolean(false),
	region: jsii.String("region"),
	resourceRecords: []*string{
		jsii.String("resourceRecords"),
	},
	setIdentifier: jsii.String("setIdentifier"),
	ttl: jsii.String("ttl"),
	weight: jsii.Number(123),
}

type CfnRecordSet_AliasTargetProperty 

type CfnRecordSet_AliasTargetProperty struct {
	// *Alias records only:* The value that you specify depends on where you want to route queries:.
	//
	// - **Amazon API Gateway custom regional APIs and edge-optimized APIs** - Specify the applicable domain name for your API. You can get the applicable value using the AWS CLI command [get-domain-names](https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html) :
	//
	// - For regional APIs, specify the value of `regionalDomainName` .
	// - For edge-optimized APIs, specify the value of `distributionDomainName` . This is the name of the associated CloudFront distribution, such as `da1b2c3d4e5.cloudfront.net` .
	//
	// > The name of the record that you're creating must match a custom domain name for your API, such as `api.example.com` .
	// - **Amazon Virtual Private Cloud interface VPC endpoint** - Enter the API endpoint for the interface endpoint, such as `vpce-123456789abcdef01-example-us-east-1a.elasticloadbalancing.us-east-1.vpce.amazonaws.com` . For edge-optimized APIs, this is the domain name for the corresponding CloudFront distribution. You can get the value of `DnsName` using the AWS CLI command [describe-vpc-endpoints](https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html) .
	// - **CloudFront distribution** - Specify the domain name that CloudFront assigned when you created your distribution.
	//
	// Your CloudFront distribution must include an alternate domain name that matches the name of the record. For example, if the name of the record is *acme.example.com* , your CloudFront distribution must include *acme.example.com* as one of the alternate domain names. For more information, see [Using Alternate Domain Names (CNAMEs)](https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html) in the *Amazon CloudFront Developer Guide* .
	//
	// You can't create a record in a private hosted zone to route traffic to a CloudFront distribution.
	//
	// > For failover alias records, you can't specify a CloudFront distribution for both the primary and secondary records. A distribution must include an alternate domain name that matches the name of the record. However, the primary and secondary records have the same name, and you can't include the same alternate domain name in more than one distribution.
	// - **Elastic Beanstalk environment** - If the domain name for your Elastic Beanstalk environment includes the region that you deployed the environment in, you can create an alias record that routes traffic to the environment. For example, the domain name `my-environment. *us-west-2* .elasticbeanstalk.com` is a regionalized domain name.
	//
	// > For environments that were created before early 2016, the domain name doesn't include the region. To route traffic to these environments, you must create a CNAME record instead of an alias record. Note that you can't create a CNAME record for the root domain name. For example, if your domain name is example.com, you can create a record that routes traffic for acme.example.com to your Elastic Beanstalk environment, but you can't create a record that routes traffic for example.com to your Elastic Beanstalk environment.
	//
	// For Elastic Beanstalk environments that have regionalized subdomains, specify the `CNAME` attribute for the environment. You can use the following methods to get the value of the CNAME attribute:
	//
	// - *AWS Management Console* : For information about how to get the value by using the console, see [Using Custom Domains with AWS Elastic Beanstalk](https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html) in the *AWS Elastic Beanstalk Developer Guide* .
	// - *Elastic Beanstalk API* : Use the `DescribeEnvironments` action to get the value of the `CNAME` attribute. For more information, see [DescribeEnvironments](https://docs.aws.amazon.com/elasticbeanstalk/latest/api/API_DescribeEnvironments.html) in the *AWS Elastic Beanstalk API Reference* .
	// - *AWS CLI* : Use the `describe-environments` command to get the value of the `CNAME` attribute. For more information, see [describe-environments](https://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html) in the *AWS CLI* .
	// - **ELB load balancer** - Specify the DNS name that is associated with the load balancer. Get the DNS name by using the AWS Management Console , the ELB API, or the AWS CLI .
	//
	// - *AWS Management Console* : Go to the EC2 page, choose *Load Balancers* in the navigation pane, choose the load balancer, choose the *Description* tab, and get the value of the *DNS name* field.
	//
	// If you're routing traffic to a Classic Load Balancer, get the value that begins with *dualstack* . If you're routing traffic to another type of load balancer, get the value that applies to the record type, A or AAAA.
	// - *Elastic Load Balancing API* : Use `DescribeLoadBalancers` to get the value of `DNSName` . For more information, see the applicable guide:
	//
	// - Classic Load Balancers: [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html)
	// - Application and Network Load Balancers: [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	// - *CloudFormation Fn::GetAtt intrinsic function* : Use the [Fn::GetAtt](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html) intrinsic function to get the value of `DNSName` :
	//
	// - [Classic Load Balancers](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values) .
	// - [Application and Network Load Balancers](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values) .
	// - *AWS CLI* : Use `describe-load-balancers` to get the value of `DNSName` . For more information, see the applicable guide:
	//
	// - Classic Load Balancers: [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	// - Application and Network Load Balancers: [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html)
	// - **Global Accelerator accelerator** - Specify the DNS name for your accelerator:
	//
	// - *Global Accelerator API* : To get the DNS name, use [DescribeAccelerator](https://docs.aws.amazon.com/global-accelerator/latest/api/API_DescribeAccelerator.html) .
	// - *AWS CLI* : To get the DNS name, use [describe-accelerator](https://docs.aws.amazon.com/cli/latest/reference/globalaccelerator/describe-accelerator.html) .
	// - **Amazon S3 bucket that is configured as a static website** - Specify the domain name of the Amazon S3 website endpoint that you created the bucket in, for example, `s3-website.us-east-2.amazonaws.com` . For more information about valid values, see the table [Amazon S3 Website Endpoints](https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints) in the *Amazon Web Services General Reference* . For more information about using S3 buckets for websites, see [Getting Started with Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/getting-started.html) in the *Amazon Route 53 Developer Guide.*
	// - **Another Route 53 record** - Specify the value of the `Name` element for a record in the current hosted zone.
	//
	// > If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't specify the domain name for a record for which the value of `Type` is `CNAME` . This is because the alias record must have the same type as the record that you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
	DnsName *string `field:"required" json:"dnsName" yaml:"dnsName"`
	// *Alias resource records sets only* : The value used depends on where you want to route traffic:.
	//
	// - **Amazon API Gateway custom regional APIs and edge-optimized APIs** - Specify the hosted zone ID for your API. You can get the applicable value using the AWS CLI command [get-domain-names](https://docs.aws.amazon.com/cli/latest/reference/apigateway/get-domain-names.html) :
	//
	// - For regional APIs, specify the value of `regionalHostedZoneId` .
	// - For edge-optimized APIs, specify the value of `distributionHostedZoneId` .
	// - **Amazon Virtual Private Cloud interface VPC endpoint** - Specify the hosted zone ID for your interface endpoint. You can get the value of `HostedZoneId` using the AWS CLI command [describe-vpc-endpoints](https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-vpc-endpoints.html) .
	// - **CloudFront distribution** - Specify `Z2FDTNDATAQYW2` . This is always the hosted zone ID when you create an alias record that routes traffic to a CloudFront distribution.
	//
	// > Alias records for CloudFront can't be created in a private zone.
	// - **Elastic Beanstalk environment** - Specify the hosted zone ID for the region that you created the environment in. The environment must have a regionalized subdomain. For a list of regions and the corresponding hosted zone IDs, see [AWS Elastic Beanstalk endpoints and quotas](https://docs.aws.amazon.com/general/latest/gr/elasticbeanstalk.html) in the *Amazon Web Services General Reference* .
	// - **ELB load balancer** - Specify the value of the hosted zone ID for the load balancer. Use the following methods to get the hosted zone ID:
	//
	// - [Service Endpoints](https://docs.aws.amazon.com/general/latest/gr/elb.html) table in the "Elastic Load Balancing Endpoints and Quotas" topic in the *Amazon Web Services General Reference* : Use the value that corresponds with the region that you created your load balancer in. Note that there are separate columns for Application and Classic Load Balancers and for Network Load Balancers.
	// - *AWS Management Console* : Go to the Amazon EC2 page, choose *Load Balancers* in the navigation pane, select the load balancer, and get the value of the *Hosted zone* field on the *Description* tab.
	// - *Elastic Load Balancing API* : Use `DescribeLoadBalancers` to get the applicable value. For more information, see the applicable guide:
	//
	// - Classic Load Balancers: Use [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html) to get the value of `CanonicalHostedZoneNameID` .
	// - Application and Network Load Balancers: Use [DescribeLoadBalancers](https://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html) to get the value of `CanonicalHostedZoneID` .
	// - *CloudFormation Fn::GetAtt intrinsic function* : Use the [Fn::GetAtt](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html) intrinsic function to get the applicable value:
	//
	// - Classic Load Balancers: Get [CanonicalHostedZoneNameID](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-elb.html#aws-properties-ec2-elb-return-values) .
	// - Application and Network Load Balancers: Get [CanonicalHostedZoneID](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-loadbalancer.html#aws-resource-elasticloadbalancingv2-loadbalancer-return-values) .
	// - *AWS CLI* : Use `describe-load-balancers` to get the applicable value. For more information, see the applicable guide:
	//
	// - Classic Load Balancers: Use [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html) to get the value of `CanonicalHostedZoneNameID` .
	// - Application and Network Load Balancers: Use [describe-load-balancers](https://docs.aws.amazon.com/cli/latest/reference/elbv2/describe-load-balancers.html) to get the value of `CanonicalHostedZoneID` .
	// - **Global Accelerator accelerator** - Specify `Z2BJ6XQ5FK7U4H` .
	// - **An Amazon S3 bucket configured as a static website** - Specify the hosted zone ID for the region that you created the bucket in. For more information about valid values, see the table [Amazon S3 Website Endpoints](https://docs.aws.amazon.com/general/latest/gr/s3.html#s3_website_region_endpoints) in the *Amazon Web Services General Reference* .
	// - **Another Route 53 record in your hosted zone** - Specify the hosted zone ID of your hosted zone. (An alias record can't reference a record in a different hosted zone.)
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
	// *Applies only to alias, failover alias, geolocation alias, latency alias, and weighted alias resource record sets:* When `EvaluateTargetHealth` is `true` , an alias resource record set inherits the health of the referenced AWS resource, such as an ELB load balancer or another resource record set in the hosted zone.
	//
	// Note the following:
	//
	// - **CloudFront distributions** - You can't set `EvaluateTargetHealth` to `true` when the alias target is a CloudFront distribution.
	// - **Elastic Beanstalk environments that have regionalized subdomains** - If you specify an Elastic Beanstalk environment in `DNSName` and the environment contains an ELB load balancer, Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. (An environment automatically contains an ELB load balancer if it includes more than one Amazon EC2 instance.) If you set `EvaluateTargetHealth` to `true` and either no Amazon EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other available resources that are healthy, if any.
	//
	// If the environment contains a single Amazon EC2 instance, there are no special requirements.
	// - **ELB load balancers** - Health checking behavior depends on the type of load balancer:
	//
	// - *Classic Load Balancers* : If you specify an ELB Classic Load Balancer in `DNSName` , Elastic Load Balancing routes queries only to the healthy Amazon EC2 instances that are registered with the load balancer. If you set `EvaluateTargetHealth` to `true` and either no EC2 instances are healthy or the load balancer itself is unhealthy, Route 53 routes queries to other resources.
	// - *Application and Network Load Balancers* : If you specify an ELB Application or Network Load Balancer and you set `EvaluateTargetHealth` to `true` , Route 53 routes queries to the load balancer based on the health of the target groups that are associated with the load balancer:
	//
	// - For an Application or Network Load Balancer to be considered healthy, every target group that contains targets must contain at least one healthy target. If any target group contains only unhealthy targets, the load balancer is considered unhealthy, and Route 53 routes queries to other resources.
	// - A target group that has no registered targets is considered unhealthy.
	//
	// > When you create a load balancer, you configure settings for Elastic Load Balancing health checks; they're not Route 53 health checks, but they perform a similar function. Do not create Route 53 health checks for the EC2 instances that you register with an ELB load balancer.
	// - **S3 buckets** - There are no special requirements for setting `EvaluateTargetHealth` to `true` when the alias target is an S3 bucket.
	// - **Other records in the same hosted zone** - If the AWS resource that you specify in `DNSName` is a record or a group of records (for example, a group of weighted records) but is not another alias record, we recommend that you associate a health check with all of the records in the alias target. For more information, see [What Happens When You Omit Health Checks?](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting) in the *Amazon Route 53 Developer Guide* .
	//
	// For more information and examples, see [Amazon Route 53 Health Checks and DNS Failover](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the *Amazon Route 53 Developer Guide* .
	EvaluateTargetHealth interface{} `field:"optional" json:"evaluateTargetHealth" yaml:"evaluateTargetHealth"`
}

*Alias records only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to.

When creating records for a private hosted zone, note the following:

- Creating geolocation alias and latency alias records in a private hosted zone is allowed but not supported. - For information about creating failover records in a private hosted zone, see [Configuring Failover in a Private Hosted Zone](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html) .

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

aliasTargetProperty := &aliasTargetProperty{
	dnsName: jsii.String("dnsName"),
	hostedZoneId: jsii.String("hostedZoneId"),

	// the properties below are optional
	evaluateTargetHealth: jsii.Boolean(false),
}

type CfnRecordSet_CidrRoutingConfigProperty added in v2.31.0 

type CfnRecordSet_CidrRoutingConfigProperty struct {
	// `CfnRecordSet.CidrRoutingConfigProperty.CollectionId`.
	CollectionId *string `field:"required" json:"collectionId" yaml:"collectionId"`
	// `CfnRecordSet.CidrRoutingConfigProperty.LocationName`.
	LocationName *string `field:"required" json:"locationName" yaml:"locationName"`
}

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

cidrRoutingConfigProperty := &cidrRoutingConfigProperty{
	collectionId: jsii.String("collectionId"),
	locationName: jsii.String("locationName"),
}

type CfnRecordSet_GeoLocationProperty 

type CfnRecordSet_GeoLocationProperty struct {
	// For geolocation resource record sets, a two-letter abbreviation that identifies a continent. Route 53 supports the following continent codes:.
	//
	// - *AF* : Africa
	// - *AN* : Antarctica
	// - *AS* : Asia
	// - *EU* : Europe
	// - *OC* : Oceania
	// - *NA* : North America
	// - *SA* : South America
	//
	// Constraint: Specifying `ContinentCode` with either `CountryCode` or `SubdivisionCode` returns an `InvalidInput` error.
	ContinentCode *string `field:"optional" json:"continentCode" yaml:"continentCode"`
	// For geolocation resource record sets, the two-letter code for a country.
	//
	// Route 53 uses the two-letter country codes that are specified in [ISO standard 3166-1 alpha-2](https://docs.aws.amazon.com/https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2) .
	CountryCode *string `field:"optional" json:"countryCode" yaml:"countryCode"`
	// For geolocation resource record sets, the two-letter code for a state of the United States.
	//
	// Route 53 doesn't support any other values for `SubdivisionCode` . For a list of state abbreviations, see [Appendix B: Two–Letter State and Possession Abbreviations](https://docs.aws.amazon.com/https://pe.usps.com/text/pub28/28apb.htm) on the United States Postal Service website.
	//
	// If you specify `subdivisioncode` , you must also specify `US` for `CountryCode` .
	SubdivisionCode *string `field:"optional" json:"subdivisionCode" yaml:"subdivisionCode"`
}

A complex type that contains information about a geographic location.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

geoLocationProperty := &geoLocationProperty{
	continentCode: jsii.String("continentCode"),
	countryCode: jsii.String("countryCode"),
	subdivisionCode: jsii.String("subdivisionCode"),
}

type CnameRecord 

type CnameRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS CNAME record.

Example: 

import acm "github.com/aws/aws-cdk-go/awscdk"
import route53 "github.com/aws/aws-cdk-go/awscdk"

// hosted zone and route53 features
var hostedZoneId string
zoneName := "example.com"

myDomainName := "api.example.com"
certificate := acm.NewCertificate(this, jsii.String("cert"), &certificateProps{
	domainName: myDomainName,
})
schema := appsync.NewSchemaFile(&schemaProps{
	filePath: jsii.String("mySchemaFile"),
})
api := appsync.NewGraphqlApi(this, jsii.String("api"), &graphqlApiProps{
	name: jsii.String("myApi"),
	schema: schema,
	domainName: &domainOptions{
		certificate: certificate,
		domainName: myDomainName,
	},
})

// hosted zone for adding appsync domain
zone := route53.hostedZone.fromHostedZoneAttributes(this, jsii.String("HostedZone"), &hostedZoneAttributes{
	hostedZoneId: jsii.String(hostedZoneId),
	zoneName: jsii.String(zoneName),
})

// create a cname to the appsync domain. will map to something like xxxx.cloudfront.net
// create a cname to the appsync domain. will map to something like xxxx.cloudfront.net
route53.NewCnameRecord(this, jsii.String("CnameApiRecord"), &cnameRecordProps{
	recordName: jsii.String("api"),
	zone: zone,
	domainName: api.appSyncDomainName,
})

func NewCnameRecord 

func NewCnameRecord(scope constructs.Construct, id *string, props *CnameRecordProps) CnameRecord

type CnameRecordProps 

type CnameRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The domain name.
	DomainName *string `field:"required" json:"domainName" yaml:"domainName"`
}

Construction properties for a CnameRecord.

Example: 

import acm "github.com/aws/aws-cdk-go/awscdk"
import route53 "github.com/aws/aws-cdk-go/awscdk"

// hosted zone and route53 features
var hostedZoneId string
zoneName := "example.com"

myDomainName := "api.example.com"
certificate := acm.NewCertificate(this, jsii.String("cert"), &certificateProps{
	domainName: myDomainName,
})
schema := appsync.NewSchemaFile(&schemaProps{
	filePath: jsii.String("mySchemaFile"),
})
api := appsync.NewGraphqlApi(this, jsii.String("api"), &graphqlApiProps{
	name: jsii.String("myApi"),
	schema: schema,
	domainName: &domainOptions{
		certificate: certificate,
		domainName: myDomainName,
	},
})

// hosted zone for adding appsync domain
zone := route53.hostedZone.fromHostedZoneAttributes(this, jsii.String("HostedZone"), &hostedZoneAttributes{
	hostedZoneId: jsii.String(hostedZoneId),
	zoneName: jsii.String(zoneName),
})

// create a cname to the appsync domain. will map to something like xxxx.cloudfront.net
// create a cname to the appsync domain. will map to something like xxxx.cloudfront.net
route53.NewCnameRecord(this, jsii.String("CnameApiRecord"), &cnameRecordProps{
	recordName: jsii.String("api"),
	zone: zone,
	domainName: api.appSyncDomainName,
})

type CommonHostedZoneProps 

type CommonHostedZoneProps struct {
	// The name of the domain.
	//
	// For resource record types that include a domain
	// name, specify a fully qualified domain name.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
	// Any comments that you want to include about the hosted zone.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The Amazon Resource Name (ARN) for the log group that you want Amazon Route 53 to send query logs to.
	QueryLogsLogGroupArn *string `field:"optional" json:"queryLogsLogGroupArn" yaml:"queryLogsLogGroupArn"`
}

Common properties to create a Route 53 hosted zone.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

commonHostedZoneProps := &commonHostedZoneProps{
	zoneName: jsii.String("zoneName"),

	// the properties below are optional
	comment: jsii.String("comment"),
	queryLogsLogGroupArn: jsii.String("queryLogsLogGroupArn"),
}

type CrossAccountZoneDelegationRecord 

type CrossAccountZoneDelegationRecord interface {
	constructs.Construct
	// The tree node.
	Node() constructs.Node
	// Returns a string representation of this construct.
	ToString() *string
}

A Cross Account Zone Delegation record.

Example: 

subZone := route53.NewPublicHostedZone(this, jsii.String("SubZone"), &publicHostedZoneProps{
	zoneName: jsii.String("sub.someexample.com"),
})

// import the delegation role by constructing the roleArn
delegationRoleArn := awscdk.stack.of(this).formatArn(&arnComponents{
	region: jsii.String(""),
	 // IAM is global in each partition
	service: jsii.String("iam"),
	account: jsii.String("parent-account-id"),
	resource: jsii.String("role"),
	resourceName: jsii.String("MyDelegationRole"),
})
delegationRole := iam.role.fromRoleArn(this, jsii.String("DelegationRole"), delegationRoleArn)

// create the record
// create the record
route53.NewCrossAccountZoneDelegationRecord(this, jsii.String("delegate"), &crossAccountZoneDelegationRecordProps{
	delegatedZone: subZone,
	parentHostedZoneName: jsii.String("someexample.com"),
	 // or you can use parentHostedZoneId
	delegationRole: delegationRole,
})

func NewCrossAccountZoneDelegationRecord 

func NewCrossAccountZoneDelegationRecord(scope constructs.Construct, id *string, props *CrossAccountZoneDelegationRecordProps) CrossAccountZoneDelegationRecord

type CrossAccountZoneDelegationRecordProps 

type CrossAccountZoneDelegationRecordProps struct {
	// The zone to be delegated.
	DelegatedZone IHostedZone `field:"required" json:"delegatedZone" yaml:"delegatedZone"`
	// The delegation role in the parent account.
	DelegationRole awsiam.IRole `field:"required" json:"delegationRole" yaml:"delegationRole"`
	// The hosted zone id in the parent account.
	ParentHostedZoneId *string `field:"optional" json:"parentHostedZoneId" yaml:"parentHostedZoneId"`
	// The hosted zone name in the parent account.
	ParentHostedZoneName *string `field:"optional" json:"parentHostedZoneName" yaml:"parentHostedZoneName"`
	// The removal policy to apply to the record set.
	RemovalPolicy awscdk.RemovalPolicy `field:"optional" json:"removalPolicy" yaml:"removalPolicy"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
}

Construction properties for a CrossAccountZoneDelegationRecord.

Example: 

subZone := route53.NewPublicHostedZone(this, jsii.String("SubZone"), &publicHostedZoneProps{
	zoneName: jsii.String("sub.someexample.com"),
})

// import the delegation role by constructing the roleArn
delegationRoleArn := awscdk.stack.of(this).formatArn(&arnComponents{
	region: jsii.String(""),
	 // IAM is global in each partition
	service: jsii.String("iam"),
	account: jsii.String("parent-account-id"),
	resource: jsii.String("role"),
	resourceName: jsii.String("MyDelegationRole"),
})
delegationRole := iam.role.fromRoleArn(this, jsii.String("DelegationRole"), delegationRoleArn)

// create the record
// create the record
route53.NewCrossAccountZoneDelegationRecord(this, jsii.String("delegate"), &crossAccountZoneDelegationRecordProps{
	delegatedZone: subZone,
	parentHostedZoneName: jsii.String("someexample.com"),
	 // or you can use parentHostedZoneId
	delegationRole: delegationRole,
})

type DsRecord 

type DsRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS DS record.

Example: 

var myZone hostedZone

route53.NewDsRecord(this, jsii.String("DSRecord"), &dsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("12345 3 1 123456789abcdef67890123456789abcdef67890"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

func NewDsRecord 

func NewDsRecord(scope constructs.Construct, id *string, props *DsRecordProps) DsRecord

type DsRecordProps 

type DsRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The DS values.
	Values *[]*string `field:"required" json:"values" yaml:"values"`
}

Construction properties for a DSRecord.

Example: 

var myZone hostedZone

route53.NewDsRecord(this, jsii.String("DSRecord"), &dsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("12345 3 1 123456789abcdef67890123456789abcdef67890"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

type HostedZone 

type HostedZone interface {
	awscdk.Resource
	IHostedZone
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// ARN of this hosted zone, such as arn:${Partition}:route53:::hostedzone/${Id}.
	HostedZoneArn() *string
	// ID of this hosted zone, such as "Z23ABC4XYZL05B".
	HostedZoneId() *string
	// Returns the set of name servers for the specific hosted zone. For example: ns1.example.com.
	//
	// This attribute will be undefined for private hosted zones or hosted zones imported from another stack.
	HostedZoneNameServers() *[]*string
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// VPCs to which this hosted zone will be added.
	Vpcs() *[]*CfnHostedZone_VPCProperty
	// FQDN of this hosted zone.
	ZoneName() *string
	// Add another VPC to this private hosted zone.
	AddVpc(vpc awsec2.IVpc)
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

Container for records, and records contain information about how to route traffic for a specific domain, such as example.com and its subdomains (acme.example.com, zenith.example.com).

Example: 

myHostedZone := route53.NewHostedZone(this, jsii.String("HostedZone"), &hostedZoneProps{
	zoneName: jsii.String("example.com"),
})
acm.NewCertificate(this, jsii.String("Certificate"), &certificateProps{
	domainName: jsii.String("hello.example.com"),
	certificateName: jsii.String("Hello World Service"),
	 // Optionally provide an certificate name
	validation: acm.certificateValidation.fromDns(myHostedZone),
})

func NewHostedZone 

func NewHostedZone(scope constructs.Construct, id *string, props *HostedZoneProps) HostedZone

type HostedZoneAttributes 

type HostedZoneAttributes struct {
	// Identifier of the hosted zone.
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
	// Name of the hosted zone.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
}

Reference to a hosted zone.

Example: 

patterns.NewHttpsRedirect(this, jsii.String("Redirect"), &httpsRedirectProps{
	recordNames: []*string{
		jsii.String("foo.example.com"),
	},
	targetDomain: jsii.String("bar.example.com"),
	zone: route53.hostedZone.fromHostedZoneAttributes(this, jsii.String("HostedZone"), &hostedZoneAttributes{
		hostedZoneId: jsii.String("ID"),
		zoneName: jsii.String("example.com"),
	}),
})

type HostedZoneProps 

type HostedZoneProps struct {
	// The name of the domain.
	//
	// For resource record types that include a domain
	// name, specify a fully qualified domain name.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
	// Any comments that you want to include about the hosted zone.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The Amazon Resource Name (ARN) for the log group that you want Amazon Route 53 to send query logs to.
	QueryLogsLogGroupArn *string `field:"optional" json:"queryLogsLogGroupArn" yaml:"queryLogsLogGroupArn"`
	// A VPC that you want to associate with this hosted zone.
	//
	// When you specify
	// this property, a private hosted zone will be created.
	//
	// You can associate additional VPCs to this private zone using `addVpc(vpc)`.
	Vpcs *[]awsec2.IVpc `field:"optional" json:"vpcs" yaml:"vpcs"`
}

Properties of a new hosted zone.

Example: 

hostedZone := route53.NewHostedZone(this, jsii.String("MyHostedZone"), &hostedZoneProps{
	zoneName: jsii.String("example.org"),
})
metric := cloudwatch.NewMetric(&metricProps{
	namespace: jsii.String("AWS/Route53"),
	metricName: jsii.String("DNSQueries"),
	dimensionsMap: map[string]*string{
		"HostedZoneId": hostedZone.hostedZoneId,
	},
})

type HostedZoneProviderProps 

type HostedZoneProviderProps struct {
	// The zone domain e.g. example.com.
	DomainName *string `field:"required" json:"domainName" yaml:"domainName"`
	// Whether the zone that is being looked up is a private hosted zone.
	PrivateZone *bool `field:"optional" json:"privateZone" yaml:"privateZone"`
	// Specifies the ID of the VPC associated with a private hosted zone.
	//
	// If a VPC ID is provided and privateZone is false, no results will be returned
	// and an error will be raised.
	VpcId *string `field:"optional" json:"vpcId" yaml:"vpcId"`
}

Zone properties for looking up the Hosted Zone.

Example: 

import s3 "github.com/aws/aws-cdk-go/awscdk"

recordName := "www"
domainName := "example.com"

bucketWebsite := s3.NewBucket(this, jsii.String("BucketWebsite"), &bucketProps{
	bucketName: []*string{
		recordName,
		domainName,
	}.join(jsii.String(".")),
	 // www.example.com
	publicReadAccess: jsii.Boolean(true),
	websiteIndexDocument: jsii.String("index.html"),
})

zone := route53.hostedZone.fromLookup(this, jsii.String("Zone"), &hostedZoneProviderProps{
	domainName: jsii.String(domainName),
}) // example.com

 // example.com
route53.NewARecord(this, jsii.String("AliasRecord"), &aRecordProps{
	zone: zone,
	recordName: jsii.String(recordName),
	 // www
	target: route53.recordTarget.fromAlias(targets.NewBucketWebsiteTarget(bucketWebsite)),
})

type IAliasRecordTarget 

type IAliasRecordTarget interface {
	// Return hosted zone ID and DNS name, usable for Route53 alias targets.
	Bind(record IRecordSet, zone IHostedZone) *AliasRecordTargetConfig
}

Classes that are valid alias record targets, like CloudFront distributions and load balancers, should implement this interface.

type IHostedZone 

type IHostedZone interface {
	awscdk.IResource
	// ARN of this hosted zone, such as arn:${Partition}:route53:::hostedzone/${Id}.
	HostedZoneArn() *string
	// ID of this hosted zone, such as "Z23ABC4XYZL05B".
	HostedZoneId() *string
	// Returns the set of name servers for the specific hosted zone. For example: ns1.example.com.
	//
	// This attribute will be undefined for private hosted zones or hosted zones imported from another stack.
	HostedZoneNameServers() *[]*string
	// FQDN of this hosted zone.
	ZoneName() *string
}

Imported or created hosted zone.

func HostedZone_FromHostedZoneAttributes 

func HostedZone_FromHostedZoneAttributes(scope constructs.Construct, id *string, attrs *HostedZoneAttributes) IHostedZone

Imports a hosted zone from another stack.

Use when both hosted zone ID and hosted zone name are known.

func HostedZone_FromHostedZoneId 

func HostedZone_FromHostedZoneId(scope constructs.Construct, id *string, hostedZoneId *string) IHostedZone

Import a Route 53 hosted zone defined either outside the CDK, or in a different CDK stack.

Use when hosted zone ID is known. If a HostedZone is imported with this method the zoneName cannot be referenced. If the zoneName is needed then the HostedZone should be imported with `fromHostedZoneAttributes()` or `fromLookup()`.

func HostedZone_FromLookup 

func HostedZone_FromLookup(scope constructs.Construct, id *string, query *HostedZoneProviderProps) IHostedZone

Lookup a hosted zone in the current account/region based on query parameters.

Requires environment, you must specify env for the stack.

Use to easily query hosted zones. See: https://docs.aws.amazon.com/cdk/latest/guide/environments.html

func PrivateHostedZone_FromHostedZoneAttributes 

func PrivateHostedZone_FromHostedZoneAttributes(scope constructs.Construct, id *string, attrs *HostedZoneAttributes) IHostedZone

Imports a hosted zone from another stack.

Use when both hosted zone ID and hosted zone name are known.

func PrivateHostedZone_FromHostedZoneId 

func PrivateHostedZone_FromHostedZoneId(scope constructs.Construct, id *string, hostedZoneId *string) IHostedZone

Import a Route 53 hosted zone defined either outside the CDK, or in a different CDK stack.

Use when hosted zone ID is known. If a HostedZone is imported with this method the zoneName cannot be referenced. If the zoneName is needed then the HostedZone should be imported with `fromHostedZoneAttributes()` or `fromLookup()`.

func PrivateHostedZone_FromLookup 

func PrivateHostedZone_FromLookup(scope constructs.Construct, id *string, query *HostedZoneProviderProps) IHostedZone

Lookup a hosted zone in the current account/region based on query parameters.

Requires environment, you must specify env for the stack.

Use to easily query hosted zones. See: https://docs.aws.amazon.com/cdk/latest/guide/environments.html

func PublicHostedZone_FromHostedZoneAttributes 

func PublicHostedZone_FromHostedZoneAttributes(scope constructs.Construct, id *string, attrs *HostedZoneAttributes) IHostedZone

Imports a hosted zone from another stack.

Use when both hosted zone ID and hosted zone name are known.

func PublicHostedZone_FromHostedZoneId 

func PublicHostedZone_FromHostedZoneId(scope constructs.Construct, id *string, hostedZoneId *string) IHostedZone

Import a Route 53 hosted zone defined either outside the CDK, or in a different CDK stack.

Use when hosted zone ID is known. If a HostedZone is imported with this method the zoneName cannot be referenced. If the zoneName is needed then the HostedZone should be imported with `fromHostedZoneAttributes()` or `fromLookup()`.

func PublicHostedZone_FromLookup 

func PublicHostedZone_FromLookup(scope constructs.Construct, id *string, query *HostedZoneProviderProps) IHostedZone

Lookup a hosted zone in the current account/region based on query parameters.

Requires environment, you must specify env for the stack.

Use to easily query hosted zones. See: https://docs.aws.amazon.com/cdk/latest/guide/environments.html

type IPrivateHostedZone 

type IPrivateHostedZone interface {
	IHostedZone
}

Represents a Route 53 private hosted zone.

func PrivateHostedZone_FromPrivateHostedZoneId 

func PrivateHostedZone_FromPrivateHostedZoneId(scope constructs.Construct, id *string, privateHostedZoneId *string) IPrivateHostedZone

Import a Route 53 private hosted zone defined either outside the CDK, or in a different CDK stack.

Use when hosted zone ID is known. If a HostedZone is imported with this method the zoneName cannot be referenced. If the zoneName is needed then you cannot import a PrivateHostedZone.

type IPublicHostedZone 

type IPublicHostedZone interface {
	IHostedZone
}

Represents a Route 53 public hosted zone.

func PublicHostedZone_FromPublicHostedZoneAttributes added in v2.21.0 

func PublicHostedZone_FromPublicHostedZoneAttributes(scope constructs.Construct, id *string, attrs *PublicHostedZoneAttributes) IPublicHostedZone

Imports a public hosted zone from another stack.

Use when both hosted zone ID and hosted zone name are known.

func PublicHostedZone_FromPublicHostedZoneId 

func PublicHostedZone_FromPublicHostedZoneId(scope constructs.Construct, id *string, publicHostedZoneId *string) IPublicHostedZone

Import a Route 53 public hosted zone defined either outside the CDK, or in a different CDK stack.

Use when hosted zone ID is known. If a PublicHostedZone is imported with this method the zoneName cannot be referenced. If the zoneName is needed then the PublicHostedZone should be imported with `fromPublicHostedZoneAttributes()`.

type IRecordSet 

type IRecordSet interface {
	awscdk.IResource
	// The domain name of the record.
	DomainName() *string
}

A record set.

type MxRecord 

type MxRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS MX record.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

mxRecord := awscdk.Aws_route53.NewMxRecord(this, jsii.String("MyMxRecord"), &mxRecordProps{
	values: []mxRecordValue{
		&mxRecordValue{
			hostName: jsii.String("hostName"),
			priority: jsii.Number(123),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewMxRecord 

func NewMxRecord(scope constructs.Construct, id *string, props *MxRecordProps) MxRecord

type MxRecordProps 

type MxRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The values.
	Values *[]*MxRecordValue `field:"required" json:"values" yaml:"values"`
}

Construction properties for a MxRecord.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

mxRecordProps := &mxRecordProps{
	values: []mxRecordValue{
		&mxRecordValue{
			hostName: jsii.String("hostName"),
			priority: jsii.Number(123),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type MxRecordValue 

type MxRecordValue struct {
	// The mail server host name.
	HostName *string `field:"required" json:"hostName" yaml:"hostName"`
	// The priority.
	Priority *float64 `field:"required" json:"priority" yaml:"priority"`
}

Properties for a MX record value.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

mxRecordValue := &mxRecordValue{
	hostName: jsii.String("hostName"),
	priority: jsii.Number(123),
}

type NsRecord 

type NsRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS NS record.

Example: 

var myZone hostedZone

route53.NewNsRecord(this, jsii.String("NSRecord"), &nsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("ns-1.awsdns.co.uk."),
		jsii.String("ns-2.awsdns.com."),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

func NewNsRecord 

func NewNsRecord(scope constructs.Construct, id *string, props *NsRecordProps) NsRecord

type NsRecordProps 

type NsRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The NS values.
	Values *[]*string `field:"required" json:"values" yaml:"values"`
}

Construction properties for a NSRecord.

Example: 

var myZone hostedZone

route53.NewNsRecord(this, jsii.String("NSRecord"), &nsRecordProps{
	zone: myZone,
	recordName: jsii.String("foo"),
	values: []*string{
		jsii.String("ns-1.awsdns.co.uk."),
		jsii.String("ns-2.awsdns.com."),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

type PrivateHostedZone 

type PrivateHostedZone interface {
	HostedZone
	IPrivateHostedZone
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// ARN of this hosted zone, such as arn:${Partition}:route53:::hostedzone/${Id}.
	HostedZoneArn() *string
	// ID of this hosted zone, such as "Z23ABC4XYZL05B".
	HostedZoneId() *string
	// Returns the set of name servers for the specific hosted zone. For example: ns1.example.com.
	//
	// This attribute will be undefined for private hosted zones or hosted zones imported from another stack.
	HostedZoneNameServers() *[]*string
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// VPCs to which this hosted zone will be added.
	Vpcs() *[]*CfnHostedZone_VPCProperty
	// FQDN of this hosted zone.
	ZoneName() *string
	// Add another VPC to this private hosted zone.
	AddVpc(vpc awsec2.IVpc)
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

Create a Route53 private hosted zone for use in one or more VPCs.

Note that `enableDnsHostnames` and `enableDnsSupport` must have been enabled for the VPC you're configuring for private hosted zones.

Example: 

var vpc vpc

zone := route53.NewPrivateHostedZone(this, jsii.String("HostedZone"), &privateHostedZoneProps{
	zoneName: jsii.String("fully.qualified.domain.com"),
	vpc: vpc,
})

func NewPrivateHostedZone 

func NewPrivateHostedZone(scope constructs.Construct, id *string, props *PrivateHostedZoneProps) PrivateHostedZone

type PrivateHostedZoneProps 

type PrivateHostedZoneProps struct {
	// The name of the domain.
	//
	// For resource record types that include a domain
	// name, specify a fully qualified domain name.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
	// Any comments that you want to include about the hosted zone.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The Amazon Resource Name (ARN) for the log group that you want Amazon Route 53 to send query logs to.
	QueryLogsLogGroupArn *string `field:"optional" json:"queryLogsLogGroupArn" yaml:"queryLogsLogGroupArn"`
	// A VPC that you want to associate with this hosted zone.
	//
	// Private hosted zones must be associated with at least one VPC. You can
	// associated additional VPCs using `addVpc(vpc)`.
	Vpc awsec2.IVpc `field:"required" json:"vpc" yaml:"vpc"`
}

Properties to create a Route 53 private hosted zone.

Example: 

var vpc vpc

zone := route53.NewPrivateHostedZone(this, jsii.String("HostedZone"), &privateHostedZoneProps{
	zoneName: jsii.String("fully.qualified.domain.com"),
	vpc: vpc,
})

type PublicHostedZone 

type PublicHostedZone interface {
	HostedZone
	IPublicHostedZone
	// Role for cross account zone delegation.
	CrossAccountZoneDelegationRole() awsiam.Role
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// ARN of this hosted zone, such as arn:${Partition}:route53:::hostedzone/${Id}.
	HostedZoneArn() *string
	// ID of this hosted zone, such as "Z23ABC4XYZL05B".
	HostedZoneId() *string
	// Returns the set of name servers for the specific hosted zone. For example: ns1.example.com.
	//
	// This attribute will be undefined for private hosted zones or hosted zones imported from another stack.
	HostedZoneNameServers() *[]*string
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// VPCs to which this hosted zone will be added.
	Vpcs() *[]*CfnHostedZone_VPCProperty
	// FQDN of this hosted zone.
	ZoneName() *string
	// Adds a delegation from this zone to a designated zone.
	AddDelegation(delegate IPublicHostedZone, opts *ZoneDelegationOptions)
	// Add another VPC to this private hosted zone.
	AddVpc(_vpc awsec2.IVpc)
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

Create a Route53 public hosted zone.

Example: 

// Example automatically generated from non-compiling source. May contain errors.
stack1 := awscdk.Newstack(app, jsii.String("Stack1"), &stackProps{
	env: &environment{
		region: jsii.String("us-east-1"),
	},
	crossRegionReferences: jsii.Boolean(true),
})
cert := acm.NewCertificate(stack1, jsii.String("Cert"), &certificateProps{
	domainName: jsii.String("*.example.com"),
	validation: acm.certificateValidation.fromDns(route53.publicHostedZone.fromHostedZoneId(stack1, jsii.String("Zone"), jsii.String("Z0329774B51CGXTDQV3X"))),
})

stack2 := awscdk.Newstack(app, jsii.String("Stack2"), &stackProps{
	env: &environment{
		region: jsii.String("us-east-2"),
	},
	crossRegionReferences: jsii.Boolean(true),
})
cloudfront.NewDistribution(stack2, jsii.String("Distribution"), &distributionProps{
	defaultBehavior: &behaviorOptions{
		origin: origins.NewHttpOrigin(jsii.String("example.com")),
	},
	domainNames: []*string{
		jsii.String("dev.example.com"),
	},
	certificate: cert,
})

func NewPublicHostedZone 

func NewPublicHostedZone(scope constructs.Construct, id *string, props *PublicHostedZoneProps) PublicHostedZone

type PublicHostedZoneAttributes added in v2.21.0 

type PublicHostedZoneAttributes struct {
	// Identifier of the hosted zone.
	HostedZoneId *string `field:"required" json:"hostedZoneId" yaml:"hostedZoneId"`
	// Name of the hosted zone.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
}

Reference to a public hosted zone.

Example: 

zoneFromAttributes := route53.publicHostedZone.fromPublicHostedZoneAttributes(this, jsii.String("MyZone"), &publicHostedZoneAttributes{
	zoneName: jsii.String("example.com"),
	hostedZoneId: jsii.String("ZOJJZC49E0EPZ"),
})

// Does not know zoneName
zoneFromId := route53.publicHostedZone.fromPublicHostedZoneId(this, jsii.String("MyZone"), jsii.String("ZOJJZC49E0EPZ"))

type PublicHostedZoneProps 

type PublicHostedZoneProps struct {
	// The name of the domain.
	//
	// For resource record types that include a domain
	// name, specify a fully qualified domain name.
	ZoneName *string `field:"required" json:"zoneName" yaml:"zoneName"`
	// Any comments that you want to include about the hosted zone.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The Amazon Resource Name (ARN) for the log group that you want Amazon Route 53 to send query logs to.
	QueryLogsLogGroupArn *string `field:"optional" json:"queryLogsLogGroupArn" yaml:"queryLogsLogGroupArn"`
	// Whether to create a CAA record to restrict certificate authorities allowed to issue certificates for this domain to Amazon only.
	CaaAmazon *bool `field:"optional" json:"caaAmazon" yaml:"caaAmazon"`
	// A principal which is trusted to assume a role for zone delegation.
	//
	// If supplied, this will create a Role in the same account as the Hosted
	// Zone, which can be assumed by the `CrossAccountZoneDelegationRecord` to
	// create a delegation record to a zone in a different account.
	//
	// Be sure to indicate the account(s) that you trust to create delegation
	// records, using either `iam.AccountPrincipal` or `iam.OrganizationPrincipal`.
	//
	// If you are planning to use `iam.ServicePrincipal`s here, be sure to include
	// region-specific service principals for every opt-in region you are going to
	// be delegating to; or don't use this feature and create separate roles
	// with appropriate permissions for every opt-in region instead.
	CrossAccountZoneDelegationPrincipal awsiam.IPrincipal `field:"optional" json:"crossAccountZoneDelegationPrincipal" yaml:"crossAccountZoneDelegationPrincipal"`
	// The name of the role created for cross account delegation.
	CrossAccountZoneDelegationRoleName *string `field:"optional" json:"crossAccountZoneDelegationRoleName" yaml:"crossAccountZoneDelegationRoleName"`
}

Construction properties for a PublicHostedZone.

Example: 

subZone := route53.NewPublicHostedZone(this, jsii.String("SubZone"), &publicHostedZoneProps{
	zoneName: jsii.String("sub.someexample.com"),
})

// import the delegation role by constructing the roleArn
delegationRoleArn := awscdk.stack.of(this).formatArn(&arnComponents{
	region: jsii.String(""),
	 // IAM is global in each partition
	service: jsii.String("iam"),
	account: jsii.String("parent-account-id"),
	resource: jsii.String("role"),
	resourceName: jsii.String("MyDelegationRole"),
})
delegationRole := iam.role.fromRoleArn(this, jsii.String("DelegationRole"), delegationRoleArn)

// create the record
// create the record
route53.NewCrossAccountZoneDelegationRecord(this, jsii.String("delegate"), &crossAccountZoneDelegationRecordProps{
	delegatedZone: subZone,
	parentHostedZoneName: jsii.String("someexample.com"),
	 // or you can use parentHostedZoneId
	delegationRole: delegationRole,
})

type RecordSet 

type RecordSet interface {
	awscdk.Resource
	IRecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A record set.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone
var recordTarget recordTarget

recordSet := awscdk.Aws_route53.NewRecordSet(this, jsii.String("MyRecordSet"), &recordSetProps{
	recordType: awscdk.*Aws_route53.recordType_A,
	target: recordTarget,
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewRecordSet 

func NewRecordSet(scope constructs.Construct, id *string, props *RecordSetProps) RecordSet

type RecordSetOptions 

type RecordSetOptions struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
}

Options for a RecordSet.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

recordSetOptions := &recordSetOptions{
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type RecordSetProps 

type RecordSetProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The record type.
	RecordType RecordType `field:"required" json:"recordType" yaml:"recordType"`
	// The target for this record, either `RecordTarget.fromValues()` or `RecordTarget.fromAlias()`.
	Target RecordTarget `field:"required" json:"target" yaml:"target"`
}

Construction properties for a RecordSet.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone
var recordTarget recordTarget

recordSetProps := &recordSetProps{
	recordType: awscdk.Aws_route53.recordType_A,
	target: recordTarget,
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type RecordTarget 

type RecordTarget interface {
	// alias for targets such as CloudFront distribution to route traffic to.
	AliasTarget() IAliasRecordTarget
	// correspond with the chosen record type (e.g. for 'A' Type, specify one or more IP addresses).
	Values() *[]*string
}

Type union for a record that accepts multiple types of target.

Example: 

import apigw "github.com/aws/aws-cdk-go/awscdk"

var zone hostedZone
var restApi lambdaRestApi

route53.NewARecord(this, jsii.String("AliasRecord"), &aRecordProps{
	zone: zone,
	target: route53.recordTarget.fromAlias(targets.NewApiGateway(restApi)),
})

func NewRecordTarget 

func NewRecordTarget(values *[]*string, aliasTarget IAliasRecordTarget) RecordTarget

func RecordTarget_FromAlias 

func RecordTarget_FromAlias(aliasTarget IAliasRecordTarget) RecordTarget

Use an alias as target.

func RecordTarget_FromIpAddresses 

func RecordTarget_FromIpAddresses(ipAddresses ...*string) RecordTarget

Use ip addresses as target.

func RecordTarget_FromValues 

func RecordTarget_FromValues(values ...*string) RecordTarget

Use string values as target.

type RecordType 

type RecordType string

The record type. 

const (
	// route traffic to a resource, such as a web server, using an IPv4 address in dotted decimal notation.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#AFormat
	//
	RecordType_A RecordType = "A"
	// route traffic to a resource, such as a web server, using an IPv6 address in colon-separated hexadecimal format.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#AAAAFormat
	//
	RecordType_AAAA RecordType = "AAAA"
	// A CAA record specifies which certificate authorities (CAs) are allowed to issue certificates for a domain or subdomain.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#CAAFormat
	//
	RecordType_CAA RecordType = "CAA"
	// A CNAME record maps DNS queries for the name of the current record, such as acme.example.com, to another domain (example.com or example.net) or subdomain (acme.example.com or zenith.example.org).
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#CNAMEFormat
	//
	RecordType_CNAME RecordType = "CNAME"
	// A delegation signer (DS) record refers a zone key for a delegated subdomain zone.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#DSFormat
	//
	RecordType_DS RecordType = "DS"
	// An MX record specifies the names of your mail servers and, if you have two or more mail servers, the priority order.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#MXFormat
	//
	RecordType_MX RecordType = "MX"
	// A Name Authority Pointer (NAPTR) is a type of record that is used by Dynamic Delegation Discovery System (DDDS) applications to convert one value to another or to replace one value with another.
	//
	// For example, one common use is to convert phone numbers into SIP URIs.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#NAPTRFormat
	//
	RecordType_NAPTR RecordType = "NAPTR"
	// An NS record identifies the name servers for the hosted zone.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#NSFormat
	//
	RecordType_NS RecordType = "NS"
	// A PTR record maps an IP address to the corresponding domain name.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#PTRFormat
	//
	RecordType_PTR RecordType = "PTR"
	// A start of authority (SOA) record provides information about a domain and the corresponding Amazon Route 53 hosted zone.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#SOAFormat
	//
	RecordType_SOA RecordType = "SOA"
	// SPF records were formerly used to verify the identity of the sender of email messages.
	//
	// Instead of an SPF record, we recommend that you create a TXT record that contains the applicable value.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#SPFFormat
	//
	RecordType_SPF RecordType = "SPF"
	// An SRV record Value element consists of four space-separated values.
	//
	// The first three values are
	// decimal numbers representing priority, weight, and port. The fourth value is a domain name.
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#SRVFormat
	//
	RecordType_SRV RecordType = "SRV"
	// A TXT record contains one or more strings that are enclosed in double quotation marks (").
	// See: https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html#TXTFormat
	//
	RecordType_TXT RecordType = "TXT"
)

type SrvRecord 

type SrvRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS SRV record.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

srvRecord := awscdk.Aws_route53.NewSrvRecord(this, jsii.String("MySrvRecord"), &srvRecordProps{
	values: []srvRecordValue{
		&srvRecordValue{
			hostName: jsii.String("hostName"),
			port: jsii.Number(123),
			priority: jsii.Number(123),
			weight: jsii.Number(123),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewSrvRecord 

func NewSrvRecord(scope constructs.Construct, id *string, props *SrvRecordProps) SrvRecord

type SrvRecordProps 

type SrvRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The values.
	Values *[]*SrvRecordValue `field:"required" json:"values" yaml:"values"`
}

Construction properties for a SrvRecord.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

srvRecordProps := &srvRecordProps{
	values: []srvRecordValue{
		&srvRecordValue{
			hostName: jsii.String("hostName"),
			port: jsii.Number(123),
			priority: jsii.Number(123),
			weight: jsii.Number(123),
		},
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type SrvRecordValue 

type SrvRecordValue struct {
	// The server host name.
	HostName *string `field:"required" json:"hostName" yaml:"hostName"`
	// The port.
	Port *float64 `field:"required" json:"port" yaml:"port"`
	// The priority.
	Priority *float64 `field:"required" json:"priority" yaml:"priority"`
	// The weight.
	Weight *float64 `field:"required" json:"weight" yaml:"weight"`
}

Properties for a SRV record value.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

srvRecordValue := &srvRecordValue{
	hostName: jsii.String("hostName"),
	port: jsii.Number(123),
	priority: jsii.Number(123),
	weight: jsii.Number(123),
}

type TxtRecord 

type TxtRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A DNS TXT record.

Example: 

var myZone hostedZone

route53.NewTxtRecord(this, jsii.String("TXTRecord"), &txtRecordProps{
	zone: myZone,
	recordName: jsii.String("_foo"),
	 // If the name ends with a ".", it will be used as-is;
	// if it ends with a "." followed by the zone name, a trailing "." will be added automatically;
	// otherwise, a ".", the zone name, and a trailing "." will be added automatically.
	// Defaults to zone root if not specified.
	values: []*string{
		jsii.String("Bar!"),
		jsii.String("Baz?"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

func NewTxtRecord 

func NewTxtRecord(scope constructs.Construct, id *string, props *TxtRecordProps) TxtRecord

type TxtRecordProps 

type TxtRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The text values.
	Values *[]*string `field:"required" json:"values" yaml:"values"`
}

Construction properties for a TxtRecord.

Example: 

var myZone hostedZone

route53.NewTxtRecord(this, jsii.String("TXTRecord"), &txtRecordProps{
	zone: myZone,
	recordName: jsii.String("_foo"),
	 // If the name ends with a ".", it will be used as-is;
	// if it ends with a "." followed by the zone name, a trailing "." will be added automatically;
	// otherwise, a ".", the zone name, and a trailing "." will be added automatically.
	// Defaults to zone root if not specified.
	values: []*string{
		jsii.String("Bar!"),
		jsii.String("Baz?"),
	},
	ttl: awscdk.Duration.minutes(jsii.Number(90)),
})

type VpcEndpointServiceDomainName 

type VpcEndpointServiceDomainName interface {
	constructs.Construct
	// The domain name associated with the private DNS configuration.
	DomainName() *string
	SetDomainName(val *string)
	// The tree node.
	Node() constructs.Node
	// Returns a string representation of this construct.
	ToString() *string
}

A Private DNS configuration for a VPC endpoint service.

Example: 

// Example automatically generated from non-compiling source. May contain errors.
import "github.com/aws/aws-cdk-go/awscdk"
var zone hostedZone
var vpces vpcEndpointService

awscdk.NewVpcEndpointServiceDomainName(this, jsii.String("EndpointDomain"), &vpcEndpointServiceDomainNameProps{
	endpointService: vpces,
	domainName: jsii.String("my-stuff.aws-cdk.dev"),
	publicHostedZone: zone,
})

func NewVpcEndpointServiceDomainName 

func NewVpcEndpointServiceDomainName(scope constructs.Construct, id *string, props *VpcEndpointServiceDomainNameProps) VpcEndpointServiceDomainName

type VpcEndpointServiceDomainNameProps 

type VpcEndpointServiceDomainNameProps struct {
	// The domain name to use.
	//
	// This domain name must be owned by this account (registered through Route53),
	// or delegated to this account. Domain ownership will be verified by AWS before
	// private DNS can be used.
	// See: https://docs.aws.amazon.com/vpc/latest/userguide/endpoint-services-dns-validation.html
	//
	DomainName *string `field:"required" json:"domainName" yaml:"domainName"`
	// The VPC Endpoint Service to configure Private DNS for.
	EndpointService awsec2.IVpcEndpointService `field:"required" json:"endpointService" yaml:"endpointService"`
	// The public hosted zone to use for the domain.
	PublicHostedZone IPublicHostedZone `field:"required" json:"publicHostedZone" yaml:"publicHostedZone"`
}

Properties to configure a VPC Endpoint Service domain name.

Example: 

// Example automatically generated from non-compiling source. May contain errors.
import "github.com/aws/aws-cdk-go/awscdk"
var zone hostedZone
var vpces vpcEndpointService

awscdk.NewVpcEndpointServiceDomainName(this, jsii.String("EndpointDomain"), &vpcEndpointServiceDomainNameProps{
	endpointService: vpces,
	domainName: jsii.String("my-stuff.aws-cdk.dev"),
	publicHostedZone: zone,
})

type ZoneDelegationOptions 

type ZoneDelegationOptions struct {
	// A comment to add on the DNS record created to incorporate the delegation.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// The TTL (Time To Live) of the DNS delegation record in DNS caches.
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
}

Options available when creating a delegation relationship from one PublicHostedZone to another.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

zoneDelegationOptions := &zoneDelegationOptions{
	comment: jsii.String("comment"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

type ZoneDelegationRecord 

type ZoneDelegationRecord interface {
	RecordSet
	// The domain name of the record.
	DomainName() *string
	// The environment this resource belongs to.
	//
	// For resources that are created and managed by the CDK
	// (generally, those created by creating new class instances like Role, Bucket, etc.),
	// this is always the same as the environment of the stack they belong to;
	// however, for imported resources
	// (those obtained from static methods like fromRoleArn, fromBucketName, etc.),
	// that might be different than the stack they were imported into.
	Env() *awscdk.ResourceEnvironment
	// The tree node.
	Node() constructs.Node
	// Returns a string-encoded token that resolves to the physical name that should be passed to the CloudFormation resource.
	//
	// This value will resolve to one of the following:
	// - a concrete value (e.g. `"my-awesome-bucket"`)
	// - `undefined`, when a name should be generated by CloudFormation
	// - a concrete name generated automatically during synthesis, in
	//    cross-environment scenarios.
	PhysicalName() *string
	// The stack in which this resource is defined.
	Stack() awscdk.Stack
	// Apply the given removal policy to this resource.
	//
	// The Removal Policy controls what happens to this resource when it stops
	// being managed by CloudFormation, either because you've removed it from the
	// CDK application or because you've made a change that requires the resource
	// to be replaced.
	//
	// The resource can be deleted (`RemovalPolicy.DESTROY`), or left in your AWS
	// account for data recovery and cleanup later (`RemovalPolicy.RETAIN`).
	ApplyRemovalPolicy(policy awscdk.RemovalPolicy)
	GeneratePhysicalName() *string
	// Returns an environment-sensitive token that should be used for the resource's "ARN" attribute (e.g. `bucket.bucketArn`).
	//
	// Normally, this token will resolve to `arnAttr`, but if the resource is
	// referenced across environments, `arnComponents` will be used to synthesize
	// a concrete ARN with the resource's physical name. Make sure to reference
	// `this.physicalName` in `arnComponents`.
	GetResourceArnAttribute(arnAttr *string, arnComponents *awscdk.ArnComponents) *string
	// Returns an environment-sensitive token that should be used for the resource's "name" attribute (e.g. `bucket.bucketName`).
	//
	// Normally, this token will resolve to `nameAttr`, but if the resource is
	// referenced across environments, it will be resolved to `this.physicalName`,
	// which will be a concrete name.
	GetResourceNameAttribute(nameAttr *string) *string
	// Returns a string representation of this construct.
	ToString() *string
}

A record to delegate further lookups to a different set of name servers.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

zoneDelegationRecord := awscdk.Aws_route53.NewZoneDelegationRecord(this, jsii.String("MyZoneDelegationRecord"), &zoneDelegationRecordProps{
	nameServers: []*string{
		jsii.String("nameServers"),
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
})

func NewZoneDelegationRecord 

func NewZoneDelegationRecord(scope constructs.Construct, id *string, props *ZoneDelegationRecordProps) ZoneDelegationRecord

type ZoneDelegationRecordProps 

type ZoneDelegationRecordProps struct {
	// The hosted zone in which to define the new record.
	Zone IHostedZone `field:"required" json:"zone" yaml:"zone"`
	// A comment to add on the record.
	Comment *string `field:"optional" json:"comment" yaml:"comment"`
	// Whether to delete the same record set in the hosted zone if it already exists.
	//
	// This allows to deploy a new record set while minimizing the downtime because the
	// new record set will be created immediately after the existing one is deleted. It
	// also avoids "manual" actions to delete existing record sets.
	DeleteExisting *bool `field:"optional" json:"deleteExisting" yaml:"deleteExisting"`
	// The domain name for this record.
	RecordName *string `field:"optional" json:"recordName" yaml:"recordName"`
	// The resource record cache time to live (TTL).
	Ttl awscdk.Duration `field:"optional" json:"ttl" yaml:"ttl"`
	// The name servers to report in the delegation records.
	NameServers *[]*string `field:"required" json:"nameServers" yaml:"nameServers"`
}

Construction properties for a ZoneDelegationRecord.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import cdk "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var hostedZone hostedZone

zoneDelegationRecordProps := &zoneDelegationRecordProps{
	nameServers: []*string{
		jsii.String("nameServers"),
	},
	zone: hostedZone,

	// the properties below are optional
	comment: jsii.String("comment"),
	deleteExisting: jsii.Boolean(false),
	recordName: jsii.String("recordName"),
	ttl: cdk.duration.minutes(jsii.Number(30)),
}

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.