awsapigatewayv2authorizers

package
v2.159.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 19, 2024 License: Apache-2.0 Imports: 9 Imported by: 2

README

AWS APIGatewayv2 Authorizers

Table of Contents

Introduction

API Gateway supports multiple mechanisms for controlling and managing access to your HTTP API. They are mainly classified into Lambda Authorizers, JWT authorizers, and standard AWS IAM roles and policies. More information is available at Controlling and managing access to an HTTP API.

HTTP APIs

Access control for HTTP APIs is managed by restricting which routes can be invoked via.

Authorizers and scopes can either be applied to the API, or specifically for each route.

Default Authorization

When using default authorization, all routes of the API will inherit the configuration.

In the example below, all routes will require the manage:books scope present in order to invoke the integration.

import "github.com/aws/aws-cdk-go/awscdk"


issuer := "https://test.us.auth0.com"
authorizer := awscdk.NewHttpJwtAuthorizer(jsii.String("DefaultAuthorizer"), issuer, &HttpJwtAuthorizerProps{
	JwtAudience: []*string{
		jsii.String("3131231"),
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"), &HttpApiProps{
	DefaultAuthorizer: authorizer,
	DefaultAuthorizationScopes: []*string{
		jsii.String("manage:books"),
	},
})
Route Authorization

Authorization can also be configured for each Route. When a route authorization is configured, it takes precedence over default authorization.

The example below showcases default authorization, along with route authorization. It also shows how to remove authorization entirely for a route.

  • GET /books and GET /books/{id} use the default authorizer settings on the api
  • POST /books will require the ['write:books'] scope
  • POST /login removes the default authorizer (unauthenticated route)
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"


issuer := "https://test.us.auth0.com"
authorizer := awscdk.NewHttpJwtAuthorizer(jsii.String("DefaultAuthorizer"), issuer, &HttpJwtAuthorizerProps{
	JwtAudience: []*string{
		jsii.String("3131231"),
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"), &HttpApiProps{
	DefaultAuthorizer: authorizer,
	DefaultAuthorizationScopes: []*string{
		jsii.String("read:books"),
	},
})

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Methods: []httpMethod{
		apigwv2.*httpMethod_GET,
	},
})

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIdIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books/{id}"),
	Methods: []*httpMethod{
		apigwv2.*httpMethod_GET,
	},
})

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Methods: []*httpMethod{
		apigwv2.*httpMethod_POST,
	},
	AuthorizationScopes: []*string{
		jsii.String("write:books"),
	},
})

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("LoginIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/login"),
	Methods: []*httpMethod{
		apigwv2.*httpMethod_POST,
	},
	Authorizer: apigwv2.NewHttpNoneAuthorizer(),
})
JWT Authorizers

JWT authorizers allow the use of JSON Web Tokens (JWTs) as part of OpenID Connect and OAuth 2.0 frameworks to allow and restrict clients from accessing HTTP APIs.

When configured, API Gateway validates the JWT submitted by the client, and allows or denies access based on its content.

The location of the token is defined by the identitySource which defaults to the HTTP Authorization header. However it also supports a number of other options. It then decodes the JWT and validates the signature and claims, against the options defined in the authorizer and route (scopes). For more information check the JWT Authorizer documentation.

Clients that fail authorization are presented with either 2 responses:

  • 401 - Unauthorized - When the JWT validation fails
  • 403 - Forbidden - When the JWT validation is successful but the required scopes are not met
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"


issuer := "https://test.us.auth0.com"
authorizer := awscdk.NewHttpJwtAuthorizer(jsii.String("BooksAuthorizer"), issuer, &HttpJwtAuthorizerProps{
	JwtAudience: []*string{
		jsii.String("3131231"),
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})
User Pool Authorizer

User Pool Authorizer is a type of JWT Authorizer that uses a Cognito user pool and app client to control who can access your API. After a successful authorization from the app client, the generated access token will be used as the JWT.

Clients accessing an API that uses a user pool authorizer must first sign in to a user pool and obtain an identity or access token. They must then use this token in the specified identitySource for the API call. More information is available at using Amazon Cognito user pools as authorizer.

import cognito "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"


userPool := cognito.NewUserPool(this, jsii.String("UserPool"))

authorizer := awscdk.NewHttpUserPoolAuthorizer(jsii.String("BooksAuthorizer"), userPool)

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})
Lambda Authorizers

Lambda authorizers use a Lambda function to control access to your HTTP API. When a client calls your API, API Gateway invokes your Lambda function and uses the response to determine whether the client can access your API.

Lambda authorizers depending on their response, fall into either two types - Simple or IAM. You can learn about differences here.

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your auth logic
var authHandler function


authorizer := awscdk.NewHttpLambdaAuthorizer(jsii.String("BooksAuthorizer"), authHandler, &HttpLambdaAuthorizerProps{
	ResponseTypes: []httpLambdaResponseType{
		awscdk.HttpLambdaResponseType_SIMPLE,
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})
IAM Authorizers

API Gateway supports IAM via the included HttpIamAuthorizer and grant syntax:

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var principal anyPrincipal


authorizer := awscdk.NewHttpIamAuthorizer()

httpApi := apigwv2.NewHttpApi(this, jsii.String("HttpApi"), &HttpApiProps{
	DefaultAuthorizer: authorizer,
})

routes := httpApi.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books/{book}"),
})

routes[0].GrantInvoke(principal)

WebSocket APIs

You can set an authorizer to your WebSocket API's $connect route to control access to your API.

Lambda Authorizer

Lambda authorizers use a Lambda function to control access to your WebSocket API. When a client connects to your API, API Gateway invokes your Lambda function and uses the response to determine whether the client can access your API.

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your auth logic
var authHandler function

// This function handles your WebSocket requests
var handler function


authorizer := awscdk.NewWebSocketLambdaAuthorizer(jsii.String("Authorizer"), authHandler)

integration := awscdk.NewWebSocketLambdaIntegration(jsii.String("Integration"), handler)

apigwv2.NewWebSocketApi(this, jsii.String("WebSocketApi"), &WebSocketApiProps{
	ConnectRouteOptions: &WebSocketRouteOptions{
		Integration: *Integration,
		Authorizer: *Authorizer,
	},
})
IAM Authorizer

IAM authorizers can be used to allow identity-based access to your WebSocket API.

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your connect route
var connectHandler function


webSocketApi := apigwv2.NewWebSocketApi(this, jsii.String("WebSocketApi"))

webSocketApi.AddRoute(jsii.String("$connect"), &WebSocketRouteOptions{
	Integration: awscdk.NewWebSocketLambdaIntegration(jsii.String("Integration"), connectHandler),
	Authorizer: awscdk.NewWebSocketIamAuthorizer(),
})

// Create an IAM user (identity)
user := iam.NewUser(this, jsii.String("User"))

webSocketArn := awscdk.stack_Of(this).FormatArn(&ArnComponents{
	Service: jsii.String("execute-api"),
	Resource: webSocketApi.ApiId,
})

// Grant access to the IAM user
user.AttachInlinePolicy(iam.NewPolicy(this, jsii.String("AllowInvoke"), &PolicyProps{
	Statements: []policyStatement{
		iam.NewPolicyStatement(&PolicyStatementProps{
			Actions: []*string{
				jsii.String("execute-api:Invoke"),
			},
			Effect: iam.Effect_ALLOW,
			Resources: []*string{
				webSocketArn,
			},
		}),
	},
}))

Import Issues

jsiirc.json file is missing during the stablization process of this module, which caused import issues for DotNet and Java users who attempt to use this module. Unfortunately, to guarantee backward compatibility, we cannot simply correct the namespace for DotNet or package for Java. The following outlines the workaround.

DotNet Namespace

Instead of the conventional namespace Amazon.CDK.AWS.Apigatewayv2.Authorizers, you would need to use the following namespace:

using Amazon.CDK.AwsApigatewayv2Authorizers;;
Java Package

Instead of conventional package import software.amazon.awscdk.services.apigatewayv2_authorizers.*, you would need to use the following package:

import software.amazon.awscdk.aws_apigatewayv2_authorizers.*;

// If you want to import a specific construct
import software.amazon.awscdk.aws_apigatewayv2_authorizers.WebSocketIamAuthorizer;

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func NewHttpIamAuthorizer_Override 

func NewHttpIamAuthorizer_Override(h HttpIamAuthorizer)

func NewHttpJwtAuthorizer_Override 

func NewHttpJwtAuthorizer_Override(h HttpJwtAuthorizer, id *string, jwtIssuer *string, props *HttpJwtAuthorizerProps)

Initialize a JWT authorizer to be bound with HTTP route.

func NewHttpLambdaAuthorizer_Override 

func NewHttpLambdaAuthorizer_Override(h HttpLambdaAuthorizer, id *string, handler awslambda.IFunction, props *HttpLambdaAuthorizerProps)

Initialize a lambda authorizer to be bound with HTTP route.

func NewHttpUserPoolAuthorizer_Override 

func NewHttpUserPoolAuthorizer_Override(h HttpUserPoolAuthorizer, id *string, pool awscognito.IUserPool, props *HttpUserPoolAuthorizerProps)

Initialize a Cognito user pool authorizer to be bound with HTTP route.

func NewWebSocketIamAuthorizer_Override 

func NewWebSocketIamAuthorizer_Override(w WebSocketIamAuthorizer)

func NewWebSocketLambdaAuthorizer_Override 

func NewWebSocketLambdaAuthorizer_Override(w WebSocketLambdaAuthorizer, id *string, handler awslambda.IFunction, props *WebSocketLambdaAuthorizerProps)

Types

type HttpIamAuthorizer 

type HttpIamAuthorizer interface {
	awsapigatewayv2.IHttpRouteAuthorizer
	// Bind this authorizer to a specified Http route.
	Bind(_options *awsapigatewayv2.HttpRouteAuthorizerBindOptions) *awsapigatewayv2.HttpRouteAuthorizerConfig
}

Authorize HTTP API Routes with IAM.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var principal anyPrincipal

authorizer := awscdk.NewHttpIamAuthorizer()

httpApi := apigwv2.NewHttpApi(this, jsii.String("HttpApi"), &HttpApiProps{
	DefaultAuthorizer: authorizer,
})

routes := httpApi.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books/{book}"),
})

routes[0].GrantInvoke(principal)

func NewHttpIamAuthorizer 

func NewHttpIamAuthorizer() HttpIamAuthorizer

type HttpJwtAuthorizer 

type HttpJwtAuthorizer interface {
	awsapigatewayv2.IHttpRouteAuthorizer
	// Bind this authorizer to a specified Http route.
	Bind(options *awsapigatewayv2.HttpRouteAuthorizerBindOptions) *awsapigatewayv2.HttpRouteAuthorizerConfig
}

Authorize Http Api routes on whether the requester is registered as part of an AWS Cognito user pool.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

issuer := "https://test.us.auth0.com"
authorizer := awscdk.NewHttpJwtAuthorizer(jsii.String("BooksAuthorizer"), issuer, &HttpJwtAuthorizerProps{
	JwtAudience: []*string{
		jsii.String("3131231"),
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})

func NewHttpJwtAuthorizer 

func NewHttpJwtAuthorizer(id *string, jwtIssuer *string, props *HttpJwtAuthorizerProps) HttpJwtAuthorizer

Initialize a JWT authorizer to be bound with HTTP route.

type HttpJwtAuthorizerProps 

type HttpJwtAuthorizerProps struct {
	// A list of the intended recipients of the JWT.
	//
	// A valid JWT must provide an aud that matches at least one entry in this list.
	JwtAudience *[]*string `field:"required" json:"jwtAudience" yaml:"jwtAudience"`
	// The name of the authorizer.
	// Default: - same value as `id` passed in the constructor.
	//
	AuthorizerName *string `field:"optional" json:"authorizerName" yaml:"authorizerName"`
	// The identity source for which authorization is requested.
	// Default: ['$request.header.Authorization']
	//
	IdentitySource *[]*string `field:"optional" json:"identitySource" yaml:"identitySource"`
}

Properties to initialize HttpJwtAuthorizer.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

issuer := "https://test.us.auth0.com"
authorizer := awscdk.NewHttpJwtAuthorizer(jsii.String("BooksAuthorizer"), issuer, &HttpJwtAuthorizerProps{
	JwtAudience: []*string{
		jsii.String("3131231"),
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})

type HttpLambdaAuthorizer 

type HttpLambdaAuthorizer interface {
	awsapigatewayv2.IHttpRouteAuthorizer
	// Bind this authorizer to a specified Http route.
	Bind(options *awsapigatewayv2.HttpRouteAuthorizerBindOptions) *awsapigatewayv2.HttpRouteAuthorizerConfig
}

Authorize Http Api routes via a lambda function.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your auth logic
var authHandler function

authorizer := awscdk.NewHttpLambdaAuthorizer(jsii.String("BooksAuthorizer"), authHandler, &HttpLambdaAuthorizerProps{
	ResponseTypes: []httpLambdaResponseType{
		awscdk.HttpLambdaResponseType_SIMPLE,
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})

func NewHttpLambdaAuthorizer 

func NewHttpLambdaAuthorizer(id *string, handler awslambda.IFunction, props *HttpLambdaAuthorizerProps) HttpLambdaAuthorizer

Initialize a lambda authorizer to be bound with HTTP route.

type HttpLambdaAuthorizerProps 

type HttpLambdaAuthorizerProps struct {
	// Friendly authorizer name.
	// Default: - same value as `id` passed in the constructor.
	//
	AuthorizerName *string `field:"optional" json:"authorizerName" yaml:"authorizerName"`
	// The identity source for which authorization is requested.
	// Default: ['$request.header.Authorization']
	//
	IdentitySource *[]*string `field:"optional" json:"identitySource" yaml:"identitySource"`
	// The types of responses the lambda can return.
	//
	// If HttpLambdaResponseType.SIMPLE is included then
	// response format 2.0 will be used.
	// See: https://docs.aws.amazon.com/apigateway/latest/developerguide/http-api-lambda-authorizer.html#http-api-lambda-authorizer.payload-format-response
	//
	// Default: [HttpLambdaResponseType.IAM]
	//
	ResponseTypes *[]HttpLambdaResponseType `field:"optional" json:"responseTypes" yaml:"responseTypes"`
	// How long APIGateway should cache the results.
	//
	// Max 1 hour.
	// Disable caching by setting this to `Duration.seconds(0)`.
	// Default: Duration.minutes(5)
	//
	ResultsCacheTtl awscdk.Duration `field:"optional" json:"resultsCacheTtl" yaml:"resultsCacheTtl"`
}

Properties to initialize HttpTokenAuthorizer.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your auth logic
var authHandler function

authorizer := awscdk.NewHttpLambdaAuthorizer(jsii.String("BooksAuthorizer"), authHandler, &HttpLambdaAuthorizerProps{
	ResponseTypes: []httpLambdaResponseType{
		awscdk.HttpLambdaResponseType_SIMPLE,
	},
})

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})

type HttpLambdaResponseType 

type HttpLambdaResponseType string

Specifies the type responses the lambda returns. 

const (
	// Returns simple boolean response.
	HttpLambdaResponseType_SIMPLE HttpLambdaResponseType = "SIMPLE"
	// Returns an IAM Policy.
	HttpLambdaResponseType_IAM HttpLambdaResponseType = "IAM"
)

type HttpUserPoolAuthorizer 

type HttpUserPoolAuthorizer interface {
	awsapigatewayv2.IHttpRouteAuthorizer
	// Bind this authorizer to a specified Http route.
	Bind(options *awsapigatewayv2.HttpRouteAuthorizerBindOptions) *awsapigatewayv2.HttpRouteAuthorizerConfig
}

Authorize Http Api routes on whether the requester is registered as part of an AWS Cognito user pool.

Example: 

import cognito "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

userPool := cognito.NewUserPool(this, jsii.String("UserPool"))

authorizer := awscdk.NewHttpUserPoolAuthorizer(jsii.String("BooksAuthorizer"), userPool)

api := apigwv2.NewHttpApi(this, jsii.String("HttpApi"))

api.AddRoutes(&AddRoutesOptions{
	Integration: awscdk.NewHttpUrlIntegration(jsii.String("BooksIntegration"), jsii.String("https://get-books-proxy.example.com")),
	Path: jsii.String("/books"),
	Authorizer: Authorizer,
})

func NewHttpUserPoolAuthorizer 

func NewHttpUserPoolAuthorizer(id *string, pool awscognito.IUserPool, props *HttpUserPoolAuthorizerProps) HttpUserPoolAuthorizer

Initialize a Cognito user pool authorizer to be bound with HTTP route.

type HttpUserPoolAuthorizerProps 

type HttpUserPoolAuthorizerProps struct {
	// Friendly name of the authorizer.
	// Default: - same value as `id` passed in the constructor.
	//
	AuthorizerName *string `field:"optional" json:"authorizerName" yaml:"authorizerName"`
	// The identity source for which authorization is requested.
	// Default: ['$request.header.Authorization']
	//
	IdentitySource *[]*string `field:"optional" json:"identitySource" yaml:"identitySource"`
	// The user pool clients that should be used to authorize requests with the user pool.
	// Default: - a new client will be created for the given user pool.
	//
	UserPoolClients *[]awscognito.IUserPoolClient `field:"optional" json:"userPoolClients" yaml:"userPoolClients"`
	// The AWS region in which the user pool is present.
	// Default: - same region as the Route the authorizer is attached to.
	//
	UserPoolRegion *string `field:"optional" json:"userPoolRegion" yaml:"userPoolRegion"`
}

Properties to initialize HttpUserPoolAuthorizer.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

var userPoolClient userPoolClient

httpUserPoolAuthorizerProps := &HttpUserPoolAuthorizerProps{
	AuthorizerName: jsii.String("authorizerName"),
	IdentitySource: []*string{
		jsii.String("identitySource"),
	},
	UserPoolClients: []iUserPoolClient{
		userPoolClient,
	},
	UserPoolRegion: jsii.String("userPoolRegion"),
}

type WebSocketIamAuthorizer 

type WebSocketIamAuthorizer interface {
	awsapigatewayv2.IWebSocketRouteAuthorizer
	// Bind this authorizer to a specified WebSocket route.
	Bind(_options *awsapigatewayv2.WebSocketRouteAuthorizerBindOptions) *awsapigatewayv2.WebSocketRouteAuthorizerConfig
}

Authorize WebSocket API Routes with IAM.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your connect route
var connectHandler function

webSocketApi := apigwv2.NewWebSocketApi(this, jsii.String("WebSocketApi"))

webSocketApi.AddRoute(jsii.String("$connect"), &WebSocketRouteOptions{
	Integration: awscdk.NewWebSocketLambdaIntegration(jsii.String("Integration"), connectHandler),
	Authorizer: awscdk.NewWebSocketIamAuthorizer(),
})

// Create an IAM user (identity)
user := iam.NewUser(this, jsii.String("User"))

webSocketArn := awscdk.stack_Of(this).FormatArn(&ArnComponents{
	Service: jsii.String("execute-api"),
	Resource: webSocketApi.ApiId,
})

// Grant access to the IAM user
user.AttachInlinePolicy(iam.NewPolicy(this, jsii.String("AllowInvoke"), &PolicyProps{
	Statements: []policyStatement{
		iam.NewPolicyStatement(&PolicyStatementProps{
			Actions: []*string{
				jsii.String("execute-api:Invoke"),
			},
			Effect: iam.Effect_ALLOW,
			Resources: []*string{
				webSocketArn,
			},
		}),
	},
}))

func NewWebSocketIamAuthorizer 

func NewWebSocketIamAuthorizer() WebSocketIamAuthorizer

type WebSocketLambdaAuthorizer 

type WebSocketLambdaAuthorizer interface {
	awsapigatewayv2.IWebSocketRouteAuthorizer
	// Bind this authorizer to a specified WebSocket route.
	Bind(options *awsapigatewayv2.WebSocketRouteAuthorizerBindOptions) *awsapigatewayv2.WebSocketRouteAuthorizerConfig
}

Authorize WebSocket Api routes via a lambda function.

Example: 

import "github.com/aws/aws-cdk-go/awscdk"
import "github.com/aws/aws-cdk-go/awscdk"

// This function handles your auth logic
var authHandler function

// This function handles your WebSocket requests
var handler function

authorizer := awscdk.NewWebSocketLambdaAuthorizer(jsii.String("Authorizer"), authHandler)

integration := awscdk.NewWebSocketLambdaIntegration(jsii.String("Integration"), handler)

apigwv2.NewWebSocketApi(this, jsii.String("WebSocketApi"), &WebSocketApiProps{
	ConnectRouteOptions: &WebSocketRouteOptions{
		Integration: *Integration,
		Authorizer: *Authorizer,
	},
})

func NewWebSocketLambdaAuthorizer 

func NewWebSocketLambdaAuthorizer(id *string, handler awslambda.IFunction, props *WebSocketLambdaAuthorizerProps) WebSocketLambdaAuthorizer

type WebSocketLambdaAuthorizerProps 

type WebSocketLambdaAuthorizerProps struct {
	// The name of the authorizer.
	// Default: - same value as `id` passed in the constructor.
	//
	AuthorizerName *string `field:"optional" json:"authorizerName" yaml:"authorizerName"`
	// The identity source for which authorization is requested.
	//
	// Request parameter match `'route.request.querystring|header.[a-zA-z0-9._-]+'`.
	// Staged variable match `'stageVariables.[a-zA-Z0-9._-]+'`.
	// Context parameter match `'context.[a-zA-Z0-9._-]+'`.
	// Default: ['route.request.header.Authorization']
	//
	IdentitySource *[]*string `field:"optional" json:"identitySource" yaml:"identitySource"`
}

Properties to initialize WebSocketTokenAuthorizer.

Example: 

// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"

webSocketLambdaAuthorizerProps := &WebSocketLambdaAuthorizerProps{
	AuthorizerName: jsii.String("authorizerName"),
	IdentitySource: []*string{
		jsii.String("identitySource"),
	},
}

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.