Documentation ¶
Index ¶
- Constants
- Variables
- type Builder
- func (m Builder) Accepted(chainID ids.ID, requestID uint32, containerIDs []ids.ID) (Msg, error)
- func (m Builder) AcceptedFrontier(chainID ids.ID, requestID uint32, containerIDs []ids.ID) (Msg, error)
- func (m Builder) Chits(chainID ids.ID, requestID uint32, containerIDs []ids.ID) (Msg, error)
- func (m Builder) Get(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
- func (m Builder) GetAccepted(chainID ids.ID, requestID uint32, deadline uint64, containerIDs []ids.ID) (Msg, error)
- func (m Builder) GetAcceptedFrontier(chainID ids.ID, requestID uint32, deadline uint64) (Msg, error)
- func (m Builder) GetAncestors(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
- func (m Builder) GetPeerList() (Msg, error)
- func (m Builder) GetVersion() (Msg, error)
- func (m Builder) MultiPut(chainID ids.ID, requestID uint32, containers [][]byte) (Msg, error)
- func (m Builder) PeerList(ipDescs []utils.IPDesc) (Msg, error)
- func (m Builder) Ping() (Msg, error)
- func (m Builder) Pong() (Msg, error)
- func (m Builder) PullQuery(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
- func (m Builder) PushQuery(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID, ...) (Msg, error)
- func (m Builder) Put(chainID ids.ID, requestID uint32, containerID ids.ID, container []byte) (Msg, error)
- func (m Builder) Version(networkID, nodeID uint32, myTime uint64, ip utils.IPDesc, myVersion string) (Msg, error)
- type Codec
- type ConnMeter
- type Dialer
- type Field
- type Msg
- type Network
- type Op
- type PeerElement
- type PeerID
- type Upgrader
Constants ¶
const (
DefaultMaxMessageSize uint32 = 1 << 21
)
reasonable default values
Variables ¶
var ( Messages = map[Op][]Field{ GetVersion: {}, Version: {NetworkID, NodeID, MyTime, IP, VersionStr}, GetPeerList: {}, PeerList: {Peers}, Ping: {}, Pong: {}, GetAcceptedFrontier: {ChainID, RequestID, Deadline}, AcceptedFrontier: {ChainID, RequestID, ContainerIDs}, GetAccepted: {ChainID, RequestID, Deadline, ContainerIDs}, Accepted: {ChainID, RequestID, ContainerIDs}, GetAncestors: {ChainID, RequestID, Deadline, ContainerID}, MultiPut: {ChainID, RequestID, MultiContainerBytes}, Get: {ChainID, RequestID, Deadline, ContainerID}, Put: {ChainID, RequestID, ContainerID, ContainerBytes}, PushQuery: {ChainID, RequestID, Deadline, ContainerID, ContainerBytes}, PullQuery: {ChainID, RequestID, Deadline, ContainerID}, Chits: {ChainID, RequestID, ContainerIDs}, } )
Defines the messages that can be sent/received with this network
Functions ¶
This section is empty.
Types ¶
type Builder ¶
type Builder struct{ Codec }
Builder extends a Codec to build messages safely
func (Builder) AcceptedFrontier ¶
func (m Builder) AcceptedFrontier(chainID ids.ID, requestID uint32, containerIDs []ids.ID) (Msg, error)
AcceptedFrontier message
func (Builder) Get ¶
func (m Builder) Get(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
Get message
func (Builder) GetAccepted ¶
func (m Builder) GetAccepted(chainID ids.ID, requestID uint32, deadline uint64, containerIDs []ids.ID) (Msg, error)
GetAccepted message
func (Builder) GetAcceptedFrontier ¶
func (m Builder) GetAcceptedFrontier(chainID ids.ID, requestID uint32, deadline uint64) (Msg, error)
GetAcceptedFrontier message
func (Builder) GetAncestors ¶
func (m Builder) GetAncestors(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
GetAncestors message
func (Builder) PullQuery ¶
func (m Builder) PullQuery(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID) (Msg, error)
PullQuery message
func (Builder) PushQuery ¶
func (m Builder) PushQuery(chainID ids.ID, requestID uint32, deadline uint64, containerID ids.ID, container []byte) (Msg, error)
PushQuery message
type Codec ¶
type Codec struct{}
Codec defines the serialization and deserialization of network messages
type ConnMeter ¶ added in v1.0.3
type ConnMeter interface { // Register that the given address tried to connect to us. // Returns the number of times they previously tried. Register(addr string) (int, error) }
ConnMeter keeps track of how many times a peer from a given address have attempted to connect to us in a given time period.
type Field ¶
type Field uint32
Field that may be packed into a message
const ( VersionStr Field = iota // Used in handshake NetworkID // Used in handshake NodeID // Used in handshake MyTime // Used in handshake IP // Used in handshake Peers // Used in handshake ChainID // Used for dispatching RequestID // Used for all messages Deadline // Used for request messages ContainerID // Used for querying ContainerBytes // Used for gossiping ContainerIDs // Used for querying MultiContainerBytes // Used in MultiPut )
Fields that may be packed. These values are not sent over the wire.
type Network ¶
type Network interface { // All consensus messages can be sent through this interface. Thread safety // must be managed internally in the network. sender.ExternalSender // The network must be able to broadcast accepted decisions to random peers. // Thread safety must be managed internally in the network. triggers.Acceptor // The network should be able to report the last time the network interacted // with a peer health.Heartbeater // Should only be called once, will run until either a fatal error occurs, // or the network is closed. Returns a non-nil error. Dispatch() error // Attempt to connect to this IP. Thread safety must be managed internally // to the network. The network will never stop attempting to connect to this // IP. Track(ip utils.IPDesc) // Returns the description of the specified [nodeIDs] this network is currently // connected to externally or all nodes this network is connected to if [nodeIDs] // is empty. Thread safety must be managed internally to the network. Peers(nodeIDs []ids.ShortID) []PeerID // Close this network and all existing connections it has. Thread safety // must be managed internally to the network. Calling close multiple times // will return a nil error. Close() error // Return the IP of the node IP() utils.IPDesc }
Network defines the functionality of the networking library.
func NewDefaultNetwork ¶
func NewDefaultNetwork( registerer prometheus.Registerer, log logging.Logger, id ids.ShortID, ip utils.DynamicIPDesc, networkID uint32, version version.Version, parser version.Parser, listener net.Listener, dialer Dialer, serverUpgrader, clientUpgrader Upgrader, vdrs validators.Set, beacons validators.Set, router router.Router, connMeterResetDuration time.Duration, connMeterMaxConns int, restarter utils.Restarter, restartOnDisconnected bool, disconnectedCheckFreq time.Duration, disconnectedRestartTimeout time.Duration, apricotPhase0Time time.Time, sendQueueSize uint32, ) Network
NewDefaultNetwork returns a new Network implementation with the provided parameters and some reasonable default values.
func NewNetwork ¶
func NewNetwork( registerer prometheus.Registerer, log logging.Logger, id ids.ShortID, ip utils.DynamicIPDesc, networkID uint32, version version.Version, parser version.Parser, listener net.Listener, dialer Dialer, serverUpgrader, clientUpgrader Upgrader, vdrs validators.Set, beacons validators.Set, router router.Router, initialReconnectDelay, maxReconnectDelay time.Duration, maxMessageSize uint32, sendQueueSize uint32, maxNetworkPendingSendBytes int, networkPendingSendBytesToRateLimit int, maxClockDifference time.Duration, peerListGossipSpacing time.Duration, peerListGossipSize int, peerListStakerGossipFraction int, getVersionTimeout time.Duration, allowPrivateIPs bool, gossipSize int, pingPongTimeout time.Duration, pingFrequency time.Duration, readBufferSize uint32, readHandshakeTimeout time.Duration, connMeterResetDuration time.Duration, connMeterCacheSize int, connMeterMaxConns int, restarter utils.Restarter, restartOnDisconnected bool, disconnectedCheckFreq time.Duration, disconnectedRestartTimeout time.Duration, apricotPhase0Time time.Time, ) Network
NewNetwork returns a new Network implementation with the provided parameters.
type Op ¶
type Op byte
Op is an opcode
type PeerElement ¶ added in v1.0.3
type PeerElement struct {
// contains filtered or unexported fields
}
holds onto the peer object as a result of helper functions
type PeerID ¶
type PeerID struct { IP string `json:"ip"` PublicIP string `json:"publicIP"` ID string `json:"nodeID"` Version string `json:"version"` LastSent time.Time `json:"lastSent"` LastReceived time.Time `json:"lastReceived"` }
PeerID ...
type Upgrader ¶
Upgrader ...
func NewTLSClientUpgrader ¶
NewTLSClientUpgrader ...
func NewTLSServerUpgrader ¶
NewTLSServerUpgrader ...