builder

Documentation

Index

• Constants
• Variables
• func NewSnowContext(networkID uint32, avaxAssetID ids.ID) (*snow.Context, error)
• type Backend
• type Builder
  • func New(addrs set.Set[ids.ShortID], context *Context, backend Backend) Builder
  • func NewWithOptions(builder Builder, options ...common.Option) Builder
• type Context

Constants

const Alias = "P"

Variables

var (
	ErrNoChangeAddress           = errors.New("no possible change address")
	ErrUnknownOutputType         = errors.New("unknown output type")
	ErrUnknownOwnerType          = errors.New("unknown owner type")
	ErrInsufficientAuthorization = errors.New("insufficient authorization")
	ErrInsufficientFunds         = errors.New("insufficient funds")
)

Functions

func NewSnowContext

func NewSnowContext(networkID uint32, avaxAssetID ids.ID) (*snow.Context, error)

Types

type Backend

type Backend interface {
	UTXOs(ctx context.Context, sourceChainID ids.ID) ([]*avax.UTXO, error)
	GetOwner(ctx context.Context, subnetID ids.ID) (fx.Owner, error)
}

type Builder

type Builder interface {
	// Context returns the configuration of the chain that this builder uses to
	// create transactions.
	Context() *Context

	// GetBalance calculates the amount of each asset that this builder has
	// control over.
	GetBalance(
		options ...common.Option,
	) (map[ids.ID]uint64, error)

	// GetImportableBalance calculates the amount of each asset that this
	// builder could import from the provided chain.
	//
	// - [chainID] specifies the chain the funds are from.
	GetImportableBalance(
		chainID ids.ID,
		options ...common.Option,
	) (map[ids.ID]uint64, error)

	// NewBaseTx creates a new simple value transfer.
	//
	// - [outputs] specifies all the recipients and amounts that should be sent
	//   from this transaction.
	NewBaseTx(
		outputs []*avax.TransferableOutput,
		options ...common.Option,
	) (*txs.BaseTx, error)

	// NewAddValidatorTx creates a new validator of the primary network.
	//
	// - [vdr] specifies all the details of the validation period such as the
	//   startTime, endTime, stake weight, and nodeID.
	// - [rewardsOwner] specifies the owner of all the rewards this validator
	//   may accrue during its validation period.
	// - [shares] specifies the fraction (out of 1,000,000) that this validator
	//   will take from delegation rewards. If 1,000,000 is provided, 100% of
	//   the delegation reward will be sent to the validator's [rewardsOwner].
	NewAddValidatorTx(
		vdr *txs.Validator,
		rewardsOwner *secp256k1fx.OutputOwners,
		shares uint32,
		options ...common.Option,
	) (*txs.AddValidatorTx, error)

	// NewAddSubnetValidatorTx creates a new validator of a subnet.
	//
	// - [vdr] specifies all the details of the validation period such as the
	//   startTime, endTime, sampling weight, nodeID, and subnetID.
	NewAddSubnetValidatorTx(
		vdr *txs.SubnetValidator,
		options ...common.Option,
	) (*txs.AddSubnetValidatorTx, error)

	// NewRemoveSubnetValidatorTx removes [nodeID] from the validator
	// set [subnetID].
	NewRemoveSubnetValidatorTx(
		nodeID ids.NodeID,
		subnetID ids.ID,
		options ...common.Option,
	) (*txs.RemoveSubnetValidatorTx, error)

	// NewAddDelegatorTx creates a new delegator to a validator on the primary
	// network.
	//
	// - [vdr] specifies all the details of the delegation period such as the
	//   startTime, endTime, stake weight, and validator's nodeID.
	// - [rewardsOwner] specifies the owner of all the rewards this delegator
	//   may accrue at the end of its delegation period.
	NewAddDelegatorTx(
		vdr *txs.Validator,
		rewardsOwner *secp256k1fx.OutputOwners,
		options ...common.Option,
	) (*txs.AddDelegatorTx, error)

	// NewCreateChainTx creates a new chain in the named subnet.
	//
	// - [subnetID] specifies the subnet to launch the chain in.
	// - [genesis] specifies the initial state of the new chain.
	// - [vmID] specifies the vm that the new chain will run.
	// - [fxIDs] specifies all the feature extensions that the vm should be
	//   running with.
	// - [chainName] specifies a human readable name for the chain.
	NewCreateChainTx(
		subnetID ids.ID,
		genesis []byte,
		vmID ids.ID,
		fxIDs []ids.ID,
		chainName string,
		options ...common.Option,
	) (*txs.CreateChainTx, error)

	// NewCreateSubnetTx creates a new subnet with the specified owner.
	//
	// - [owner] specifies who has the ability to create new chains and add new
	//   validators to the subnet.
	NewCreateSubnetTx(
		owner *secp256k1fx.OutputOwners,
		options ...common.Option,
	) (*txs.CreateSubnetTx, error)

	// NewTransferSubnetOwnershipTx changes the owner of the named subnet.
	//
	// - [subnetID] specifies the subnet to be modified
	// - [owner] specifies who has the ability to create new chains and add new
	//   validators to the subnet.
	NewTransferSubnetOwnershipTx(
		subnetID ids.ID,
		owner *secp256k1fx.OutputOwners,
		options ...common.Option,
	) (*txs.TransferSubnetOwnershipTx, error)

	// NewConvertSubnetTx converts the subnet to a Permissionless L1.
	//
	// - [subnetID] specifies the subnet to be converted
	// - [chainID] specifies which chain the manager is deployed on
	// - [address] specifies the address of the manager
	// - [validators] specifies the initial SoVs of the converted subnet
	NewConvertSubnetTx(
		subnetID ids.ID,
		chainID ids.ID,
		address []byte,
		validators []*txs.ConvertSubnetValidator,
		options ...common.Option,
	) (*txs.ConvertSubnetTx, error)

	// RegisterSubnetValidatorTx adds a validator to a Permissionless L1.
	//
	// - [balance] that the validator should allocate to continuous fees
	// - [proofOfPossession] is the BLS PoP for the key included in the Warp
	//   message
	// - [message] is the Warp message that authorizes this validator to be
	//   added
	NewRegisterSubnetValidatorTx(
		balance uint64,
		proofOfPossession [bls.SignatureLen]byte,
		message []byte,
		options ...common.Option,
	) (*txs.RegisterSubnetValidatorTx, error)

	// NewSetSubnetValidatorWeightTx sets the weight of a validator on a
	// Permissionless L1.
	//
	// - [message] is the Warp message that authorizes this validator's weight
	//   to be changed
	NewSetSubnetValidatorWeightTx(
		message []byte,
		options ...common.Option,
	) (*txs.SetSubnetValidatorWeightTx, error)

	// NewIncreaseBalanceTx increases the balance of a validator on
	// Permissionless L1 for the continuous fee.
	//
	// - [validationID] of the validator
	// - [balance] amount to increase the validator's balance by
	NewIncreaseBalanceTx(
		validationID ids.ID,
		balance uint64,
		options ...common.Option,
	) (*txs.IncreaseBalanceTx, error)

	// NewIncreaseBalanceTx disables a validator and returns the continuous fee
	// to the remaining balance owner.
	//
	// - [validationID] of the validator to disable
	NewDisableSubnetValidatorTx(
		validationID ids.ID,
		options ...common.Option,
	) (*txs.DisableSubnetValidatorTx, error)

	// NewImportTx creates an import transaction that attempts to consume all
	// the available UTXOs and import the funds to [to].
	//
	// - [chainID] specifies the chain to be importing funds from.
	// - [to] specifies where to send the imported funds to.
	NewImportTx(
		chainID ids.ID,
		to *secp256k1fx.OutputOwners,
		options ...common.Option,
	) (*txs.ImportTx, error)

	// NewExportTx creates an export transaction that attempts to send all the
	// provided [outputs] to the requested [chainID].
	//
	// - [chainID] specifies the chain to be exporting the funds to.
	// - [outputs] specifies the outputs to send to the [chainID].
	NewExportTx(
		chainID ids.ID,
		outputs []*avax.TransferableOutput,
		options ...common.Option,
	) (*txs.ExportTx, error)

	// NewTransformSubnetTx creates a transform subnet transaction that attempts
	// to convert the provided [subnetID] from a permissioned subnet to a
	// permissionless subnet. This transaction will convert
	// [maxSupply] - [initialSupply] of [assetID] to staking rewards.
	//
	// - [subnetID] specifies the subnet to transform.
	// - [assetID] specifies the asset to use to reward stakers on the subnet.
	// - [initialSupply] is the amount of [assetID] that will be in circulation
	//   after this transaction is accepted.
	// - [maxSupply] is the maximum total amount of [assetID] that should ever
	//   exist.
	// - [minConsumptionRate] is the rate that a staker will receive rewards
	//   if they stake with a duration of 0.
	// - [maxConsumptionRate] is the maximum rate that staking rewards should be
	//   consumed from the reward pool per year.
	// - [minValidatorStake] is the minimum amount of funds required to become a
	//   validator.
	// - [maxValidatorStake] is the maximum amount of funds a single validator
	//   can be allocated, including delegated funds.
	// - [minStakeDuration] is the minimum number of seconds a staker can stake
	//   for.
	// - [maxStakeDuration] is the maximum number of seconds a staker can stake
	//   for.
	// - [minValidatorStake] is the minimum amount of funds required to become a
	//   delegator.
	// - [maxValidatorWeightFactor] is the factor which calculates the maximum
	//   amount of delegation a validator can receive. A value of 1 effectively
	//   disables delegation.
	// - [uptimeRequirement] is the minimum percentage a validator must be
	//   online and responsive to receive a reward.
	NewTransformSubnetTx(
		subnetID ids.ID,
		assetID ids.ID,
		initialSupply uint64,
		maxSupply uint64,
		minConsumptionRate uint64,
		maxConsumptionRate uint64,
		minValidatorStake uint64,
		maxValidatorStake uint64,
		minStakeDuration time.Duration,
		maxStakeDuration time.Duration,
		minDelegationFee uint32,
		minDelegatorStake uint64,
		maxValidatorWeightFactor byte,
		uptimeRequirement uint32,
		options ...common.Option,
	) (*txs.TransformSubnetTx, error)

	// NewAddPermissionlessValidatorTx creates a new validator of the specified
	// subnet.
	//
	// - [vdr] specifies all the details of the validation period such as the
	//   subnetID, startTime, endTime, stake weight, and nodeID.
	// - [signer] if the subnetID is the primary network, this is the BLS key
	//   for this validator. Otherwise, this value should be the empty signer.
	// - [assetID] specifies the asset to stake.
	// - [validationRewardsOwner] specifies the owner of all the rewards this
	//   validator earns for its validation period.
	// - [delegationRewardsOwner] specifies the owner of all the rewards this
	//   validator earns for delegations during its validation period.
	// - [shares] specifies the fraction (out of 1,000,000) that this validator
	//   will take from delegation rewards. If 1,000,000 is provided, 100% of
	//   the delegation reward will be sent to the validator's [rewardsOwner].
	NewAddPermissionlessValidatorTx(
		vdr *txs.SubnetValidator,
		signer signer.Signer,
		assetID ids.ID,
		validationRewardsOwner *secp256k1fx.OutputOwners,
		delegationRewardsOwner *secp256k1fx.OutputOwners,
		shares uint32,
		options ...common.Option,
	) (*txs.AddPermissionlessValidatorTx, error)

	// NewAddPermissionlessDelegatorTx creates a new delegator of the specified
	// subnet on the specified nodeID.
	//
	// - [vdr] specifies all the details of the delegation period such as the
	//   subnetID, startTime, endTime, stake weight, and nodeID.
	// - [assetID] specifies the asset to stake.
	// - [rewardsOwner] specifies the owner of all the rewards this delegator
	//   earns during its delegation period.
	NewAddPermissionlessDelegatorTx(
		vdr *txs.SubnetValidator,
		assetID ids.ID,
		rewardsOwner *secp256k1fx.OutputOwners,
		options ...common.Option,
	) (*txs.AddPermissionlessDelegatorTx, error)
}

Builder provides a convenient interface for building unsigned P-chain transactions.

func New

func New(
	addrs set.Set[ids.ShortID],
	context *Context,
	backend Backend,
) Builder

New returns a new transaction builder.

• [addrs] is the set of addresses that the builder assumes can be used when signing the transactions in the future.
• context provides the chain's configuration.
• [backend] provides the chain's state.

func NewWithOptions

func NewWithOptions(builder Builder, options ...common.Option) Builder

NewWithOptions returns a new builder that will use the given options by default.

• builder is the builder that will be called to perform the underlying operations.
• [options] will be provided to the builder in addition to the options provided in the method calls.

type Context

type Context struct {
	NetworkID         uint32
	AVAXAssetID       ids.ID
	StaticFeeConfig   fee.StaticConfig
	ComplexityWeights gas.Dimensions
	GasPrice          gas.Price
}