route53

package
v1.4.12 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 22, 2016 License: Apache-2.0 Imports: 14 Imported by: 0

Documentation

Overview

Package route53 provides a client for Amazon Route 53.

Index

Examples

Constants

View Source 
const (
	// @enum ChangeAction
	ChangeActionCreate = "CREATE"
	// @enum ChangeAction
	ChangeActionDelete = "DELETE"
	// @enum ChangeAction
	ChangeActionUpsert = "UPSERT"
)
View Source 
const (
	// @enum ChangeStatus
	ChangeStatusPending = "PENDING"
	// @enum ChangeStatus
	ChangeStatusInsync = "INSYNC"
)
View Source 
const (
	// @enum CloudWatchRegion
	CloudWatchRegionUsEast1 = "us-east-1"
	// @enum CloudWatchRegion
	CloudWatchRegionUsWest1 = "us-west-1"
	// @enum CloudWatchRegion
	CloudWatchRegionUsWest2 = "us-west-2"
	// @enum CloudWatchRegion
	CloudWatchRegionEuCentral1 = "eu-central-1"
	// @enum CloudWatchRegion
	CloudWatchRegionEuWest1 = "eu-west-1"
	// @enum CloudWatchRegion
	CloudWatchRegionApSouth1 = "ap-south-1"
	// @enum CloudWatchRegion
	CloudWatchRegionApSoutheast1 = "ap-southeast-1"
	// @enum CloudWatchRegion
	CloudWatchRegionApSoutheast2 = "ap-southeast-2"
	// @enum CloudWatchRegion
	CloudWatchRegionApNortheast1 = "ap-northeast-1"
	// @enum CloudWatchRegion
	CloudWatchRegionApNortheast2 = "ap-northeast-2"
	// @enum CloudWatchRegion
	CloudWatchRegionSaEast1 = "sa-east-1"
)
View Source 
const (
	// @enum ComparisonOperator
	ComparisonOperatorGreaterThanOrEqualToThreshold = "GreaterThanOrEqualToThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorGreaterThanThreshold = "GreaterThanThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorLessThanThreshold = "LessThanThreshold"
	// @enum ComparisonOperator
	ComparisonOperatorLessThanOrEqualToThreshold = "LessThanOrEqualToThreshold"
)
View Source 
const (
	// @enum HealthCheckRegion
	HealthCheckRegionUsEast1 = "us-east-1"
	// @enum HealthCheckRegion
	HealthCheckRegionUsWest1 = "us-west-1"
	// @enum HealthCheckRegion
	HealthCheckRegionUsWest2 = "us-west-2"
	// @enum HealthCheckRegion
	HealthCheckRegionEuWest1 = "eu-west-1"
	// @enum HealthCheckRegion
	HealthCheckRegionApSoutheast1 = "ap-southeast-1"
	// @enum HealthCheckRegion
	HealthCheckRegionApSoutheast2 = "ap-southeast-2"
	// @enum HealthCheckRegion
	HealthCheckRegionApNortheast1 = "ap-northeast-1"
	// @enum HealthCheckRegion
	HealthCheckRegionSaEast1 = "sa-east-1"
)

An Amazon EC2 region that you want Amazon Route 53 to use to perform health checks.

View Source 
const (
	// @enum HealthCheckType
	HealthCheckTypeHttp = "HTTP"
	// @enum HealthCheckType
	HealthCheckTypeHttps = "HTTPS"
	// @enum HealthCheckType
	HealthCheckTypeHttpStrMatch = "HTTP_STR_MATCH"
	// @enum HealthCheckType
	HealthCheckTypeHttpsStrMatch = "HTTPS_STR_MATCH"
	// @enum HealthCheckType
	HealthCheckTypeTcp = "TCP"
	// @enum HealthCheckType
	HealthCheckTypeCalculated = "CALCULATED"
	// @enum HealthCheckType
	HealthCheckTypeCloudwatchMetric = "CLOUDWATCH_METRIC"
)
View Source 
const (
	// @enum InsufficientDataHealthStatus
	InsufficientDataHealthStatusHealthy = "Healthy"
	// @enum InsufficientDataHealthStatus
	InsufficientDataHealthStatusUnhealthy = "Unhealthy"
	// @enum InsufficientDataHealthStatus
	InsufficientDataHealthStatusLastKnownStatus = "LastKnownStatus"
)
View Source 
const (
	// @enum RRType
	RRTypeSoa = "SOA"
	// @enum RRType
	RRTypeA = "A"
	// @enum RRType
	RRTypeTxt = "TXT"
	// @enum RRType
	RRTypeNs = "NS"
	// @enum RRType
	RRTypeCname = "CNAME"
	// @enum RRType
	RRTypeMx = "MX"
	// @enum RRType
	RRTypeNaptr = "NAPTR"
	// @enum RRType
	RRTypePtr = "PTR"
	// @enum RRType
	RRTypeSrv = "SRV"
	// @enum RRType
	RRTypeSpf = "SPF"
	// @enum RRType
	RRTypeAaaa = "AAAA"
)
View Source 
const (
	// @enum ResourceRecordSetFailover
	ResourceRecordSetFailoverPrimary = "PRIMARY"
	// @enum ResourceRecordSetFailover
	ResourceRecordSetFailoverSecondary = "SECONDARY"
)
View Source 
const (
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionUsEast1 = "us-east-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionUsWest1 = "us-west-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionUsWest2 = "us-west-2"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionEuWest1 = "eu-west-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionEuCentral1 = "eu-central-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionApSoutheast1 = "ap-southeast-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionApSoutheast2 = "ap-southeast-2"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionApNortheast1 = "ap-northeast-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionApNortheast2 = "ap-northeast-2"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionSaEast1 = "sa-east-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionCnNorth1 = "cn-north-1"
	// @enum ResourceRecordSetRegion
	ResourceRecordSetRegionApSouth1 = "ap-south-1"
)
View Source 
const (
	// @enum Statistic
	StatisticAverage = "Average"
	// @enum Statistic
	StatisticSum = "Sum"
	// @enum Statistic
	StatisticSampleCount = "SampleCount"
	// @enum Statistic
	StatisticMaximum = "Maximum"
	// @enum Statistic
	StatisticMinimum = "Minimum"
)
View Source 
const (
	// @enum TagResourceType
	TagResourceTypeHealthcheck = "healthcheck"
	// @enum TagResourceType
	TagResourceTypeHostedzone = "hostedzone"
)
View Source 
const (
	// @enum VPCRegion
	VPCRegionUsEast1 = "us-east-1"
	// @enum VPCRegion
	VPCRegionUsWest1 = "us-west-1"
	// @enum VPCRegion
	VPCRegionUsWest2 = "us-west-2"
	// @enum VPCRegion
	VPCRegionEuWest1 = "eu-west-1"
	// @enum VPCRegion
	VPCRegionEuCentral1 = "eu-central-1"
	// @enum VPCRegion
	VPCRegionApSoutheast1 = "ap-southeast-1"
	// @enum VPCRegion
	VPCRegionApSoutheast2 = "ap-southeast-2"
	// @enum VPCRegion
	VPCRegionApSouth1 = "ap-south-1"
	// @enum VPCRegion
	VPCRegionApNortheast1 = "ap-northeast-1"
	// @enum VPCRegion
	VPCRegionApNortheast2 = "ap-northeast-2"
	// @enum VPCRegion
	VPCRegionSaEast1 = "sa-east-1"
	// @enum VPCRegion
	VPCRegionCnNorth1 = "cn-north-1"
)
View Source 
const ServiceName = "route53"

A ServiceName is the name of the service the client will make API calls to.

Variables

This section is empty.

Functions

This section is empty.

Types

type AlarmIdentifier added in v1.1.16 

type AlarmIdentifier struct {

	// The name of the CloudWatch alarm that you want Amazon Route 53 health checkers
	// to use to determine whether this health check is healthy.
	Name *string `min:"1" type:"string" required:"true"`

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	//
	// For the current list of CloudWatch regions, see Amazon CloudWatch (http://docs.aws.amazon.com/general/latest/gr/rande.html#cw_region)
	// in AWS Regions and Endpoints in the Amazon Web Services General Reference.
	Region *string `min:"1" type:"string" required:"true" enum:"CloudWatchRegion"`
	// contains filtered or unexported fields
}

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether this health check is healthy.

func (AlarmIdentifier) GoString added in v1.1.16 

func (s AlarmIdentifier) GoString() string

GoString returns the string representation

func (AlarmIdentifier) String added in v1.1.16 

func (s AlarmIdentifier) String() string

String returns the string representation

func (*AlarmIdentifier) Validate added in v1.1.21 

func (s *AlarmIdentifier) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AliasTarget 

type AliasTarget struct {

	// Alias resource record sets only: The value that you specify depends on where
	// you want to route queries:
	//
	//    A CloudFront distribution: Specify the domain name that CloudFront assigned
	// when you created your distribution.
	//
	// Your CloudFront distribution must include an alternate domain name that
	// matches the name of the resource record set. For example, if the name of
	// the resource record set is acme.example.com, your CloudFront distribution
	// must include acme.example.com as one of the alternate domain names. For more
	// information, see Using Alternate Domain Names (CNAMEs) (http://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html)
	// in the Amazon CloudFront Developer Guide.
	//
	//    Elastic Beanstalk environment: Specify the CNAME attribute for the environment.
	// (The environment must have a regionalized domain name.) You can use the following
	// methods to get the value of the CNAME attribute:
	//
	//    AWS Managment Console: For information about how to get the value by
	// using the console, see Using Custom Domains with Elastic Beanstalk (http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html)
	// in the AWS Elastic Beanstalk Developer Guide.
	//
	//    Elastic Load Balancing API: Use the DescribeEnvironments action to get
	// the value of the CNAME attribute. For more information, see DescribeEnvironments
	// (http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/API_DescribeEnvironments.html)
	// in the AWS Elastic Beanstalk API Reference.
	//
	//    AWS CLI: Use the describe-environments command to get the value of the
	// CNAME attribute. For more information, see describe-environments (http://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html)
	// in the AWS Command Line Interface Reference.
	//
	//      An ELB load balancer: Specify the DNS name associated with the load
	// balancer. Get the DNS name by using the AWS Management Console, the ELB API,
	// or the AWS CLI. Use the same method to get values for HostedZoneId and DNSName.
	// If you get one value from the console and the other value from the API or
	// the CLI, creating the resource record set will fail.
	//
	//    AWS Management Console: Go to the Amazon EC2 page, click Load Balancers
	// in the navigation pane, choose the load balancer, choose the Description
	// tab, and get the value of the DNS Name field that begins with dualstack.
	// Use the same process to get the Hosted Zone ID. See HostedZone$Id.
	//
	//    Elastic Load Balancing API: Use  DescribeLoadBalancers (http://docs.aws.amazon.com/ElasticLoadBalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//  to get the value of CanonicalHostedZoneName. Use the same process to get
	// the CanonicalHostedZoneNameId. See HostedZone$Id.
	//
	//    AWS CLI: Use  describe-load-balancers (http://docs.aws.amazon.com/ElasticLoadBalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//  to get the value of CanonicalHostedZoneName. Use the same process to get
	// the CanonicalHostedZoneNameId. See HostedZoneId.
	//
	//      An Amazon S3 bucket that is configured as a static website: Specify
	// the domain name of the Amazon S3 website endpoint in which you created the
	// bucket; for example, s3-website-us-east-1.amazonaws.com. For more information
	// about valid values, see the table Amazon Simple Storage Service (S3) Website
	// Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region)
	// in the Amazon Web Services General Reference. For more information about
	// using Amazon S3 buckets for websites, see Hosting a Static Website on Amazon
	// S3 (http://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html) in
	// the Amazon Simple Storage Service Developer Guide.
	//
	//    Another Amazon Route 53 resource record set: Specify the value of the
	// Name element for a resource record set in the current hosted zone.
	DNSName *string `type:"string" required:"true"`

	// Applies only to alias, weighted alias, latency alias, and failover alias
	// record sets: If you set the value of EvaluateTargetHealth to true for the
	// resource record set or sets in an alias, weighted alias, latency alias, or
	// failover alias resource record set, and if you specify a value for  HealthCheck$Id
	//  for every resource record set that is referenced by these alias resource
	// record sets, the alias resource record sets inherit the health of the referenced
	// resource record sets.
	//
	// In this configuration, when Amazon Route 53 receives a DNS query for an
	// alias resource record set:
	//
	//   Amazon Route 53 looks at the resource record sets that are referenced
	// by the alias resource record sets to determine which health checks they're
	// using.
	//
	//   Amazon Route 53 checks the current status of each health check. (Amazon
	// Route 53 periodically checks the health of the endpoint that is specified
	// in a health check; it doesn't perform the health check when the DNS query
	// arrives.)
	//
	//   Based on the status of the health checks, Amazon Route 53 determines which
	// resource record sets are healthy. Unhealthy resource record sets are immediately
	// removed from consideration. In addition, if all of the resource record sets
	// that are referenced by an alias resource record set are unhealthy, that alias
	// resource record set also is immediately removed from consideration.
	//
	//   Based on the configuration of the alias resource record sets (weighted
	// alias or latency alias, for example) and the configuration of the resource
	// record sets that they reference, Amazon Route 53 chooses a resource record
	// set from the healthy resource record sets, and responds to the query.
	//
	//   Note the following:
	//
	//   You cannot set EvaluateTargetHealth to true when the alias target is a
	// CloudFront distribution.
	//
	//   If the AWS resource that you specify in AliasTarget is a resource record
	// set or a group of resource record sets (for example, a group of weighted
	// resource record sets), but it is not another alias resource record set, we
	// recommend that you associate a health check with all of the resource record
	// sets in the alias target.For more information, see What Happens When You
	// Omit Health Checks? (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting)
	// in the Amazon Route 53 Developer Guide.
	//
	//   If you specify an Elastic Beanstalk environment in HostedZoneId and DNSName,
	// and if the environment contains an ELB load balancer, Elastic Load Balancing
	// routes queries only to the healthy Amazon EC2 instances that are registered
	// with the load balancer. (An environment automatically contains an ELB load
	// balancer if it includes more than one Amazon EC2 instance.) If you set EvaluateTargetHealth
	// to true and either no Amazon EC2 instances are healthy or the load balancer
	// itself is unhealthy, Amazon Route 53 routes queries to other available resources
	// that are healthy, if any.
	//
	// If the environment contains a single Amazon EC2 instance, there are no special
	// requirements.
	//
	//   If you specify an ELB load balancer in  AliasTarget , Elastic Load Balancing
	// routes queries only to the healthy Amazon EC2 instances that are registered
	// with the load balancer. If no Amazon EC2 instances are healthy or if the
	// load balancer itself is unhealthy, and if EvaluateTargetHealth is true for
	// the corresponding alias resource record set, Amazon Route 53 routes queries
	// to other resources. When you create a load balancer, you configure settings
	// for Elastic Load Balancing health checks; they're not Amazon Route 53 health
	// checks, but they perform a similar function. Do not create Amazon Route 53
	// health checks for the Amazon EC2 instances that you register with an ELB
	// load balancer.
	//
	// For more information, see How Health Checks Work in More Complex Amazon
	// Route 53 Configurations (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html)
	// in the Amazon Route 53 Developers Guide.
	//
	//   We recommend that you set EvaluateTargetHealth to true only when you have
	// enough idle capacity to handle the failure of one or more endpoints.
	//
	//   For more information and examples, see Amazon Route 53 Health Checks and
	// DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// in the Amazon Route 53 Developer Guide.
	EvaluateTargetHealth *bool `type:"boolean" required:"true"`

	// Alias resource records sets only: The value used depends on where the queries
	// are routed:
	//
	//  A CloudFront distribution  Specify Z2FDTNDATAQYW2.
	//
	//  Alias resource record sets for CloudFront cannot be created in a private
	// zone.
	//
	//   Elastic Beanstalk environment  Specify the hosted zone ID for the region
	// in which you created the environment. The environment must have a regionalized
	// subdomain. For a list of regions and the corresponding hosted zone IDs, see
	//  AWS Elastic Beanstalk (http://docs.aws.amazon.com/general/latest/gr/rande.html#elasticbeanstalk_region)
	// in the Regions and Endpoints chapter of the AWSk General Reference.
	//
	//  ELB load balancer  Specify the value of the hosted zone ID for the load
	// balancer. Use the following methods to get the hosted zone ID:
	//
	//   AWS Management Console: Go to the Amazon EC2; page, click Load Balancers
	// in the navigation pane, select the load balancer, and get the value of the
	// Hosted Zone ID field on the Description tab. Use the same process to get
	// the DNS Name. See HostedZone$Name.
	//
	//   Elastic Load Balancing API: Use DescribeLoadBalancers to get the value
	// of CanonicalHostedZoneNameID. Use the same process to get the CanonicalHostedZoneName.
	// See HostedZone$Name.
	//
	//   AWS CLI: Use  describe-load-balancers (http://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	//  to get the value of CanonicalHostedZoneNameID. Use the same process to get
	// the CanonicalHostedZoneName. See HostedZone$Name.
	//
	//    An Amazon S3 bucket configured as a static website  Specify the hosted
	// zone ID for the Amazon S3 website endpoint in which you created the bucket.
	// For more information about valid values, see the table  Amazon S3 (S3) Website
	// Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region)
	// in the Amazon Web Services General Reference.
	//
	//  Another Amazon Route 53 resource record set in your hosted zone  Specify
	// the hosted zone ID of your hosted zone. (An alias resource record set cannot
	// reference a resource record set in a different hosted zone.)
	HostedZoneId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Alias resource record sets only: Information about the CloudFront distribution, Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or Amazon Route 53 resource record set to which you are redirecting queries. The Elastic Beanstalk environment must have a regionalized subdomain.

When creating resource record sets for a private hosted zone, note the following: 

Resource record sets cannot be created for CloudFront distributions in

a private hosted zone. 

Creating geolocation alias resource record sets or latency alias resource

record sets in a private hosted zone is unsupported. 

For information about creating failover resource record sets in a private

hosted zone, see Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html).

func (AliasTarget) GoString added in v0.6.5 

func (s AliasTarget) GoString() string

GoString returns the string representation

func (AliasTarget) String added in v0.6.5 

func (s AliasTarget) String() string

String returns the string representation

func (*AliasTarget) Validate added in v1.1.21 

func (s *AliasTarget) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneInput 

type AssociateVPCWithHostedZoneInput struct {

	// Optional: A comment about the association request.
	Comment *string `type:"string"`

	// The ID of the hosted zone you want to associate your VPC with.
	//
	// Note that you cannot associate a VPC with a hosted zone that doesn't have
	// an existing VPC association.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type containing information about the Amazon VPC that you're associating
	// with the specified hosted zone.
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the VPC and the hosted zone that you want to associate.

func (AssociateVPCWithHostedZoneInput) GoString added in v0.6.5 

func (s AssociateVPCWithHostedZoneInput) GoString() string

GoString returns the string representation

func (AssociateVPCWithHostedZoneInput) String added in v0.6.5 

func (s AssociateVPCWithHostedZoneInput) String() string

String returns the string representation

func (*AssociateVPCWithHostedZoneInput) Validate added in v1.1.21 

func (s *AssociateVPCWithHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneOutput 

type AssociateVPCWithHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the hosted zone.

func (AssociateVPCWithHostedZoneOutput) GoString added in v0.6.5 

func (s AssociateVPCWithHostedZoneOutput) GoString() string

GoString returns the string representation

func (AssociateVPCWithHostedZoneOutput) String added in v0.6.5 

func (s AssociateVPCWithHostedZoneOutput) String() string

String returns the string representation

type Change 

type Change struct {

	// The action to perform:
	//
	//    CREATE: Creates a resource record set that has the specified values.
	//
	//    DELETE: Deletes a existing resource record set that has the specified
	// values for Name, Type, SetIdentifier (for latency, weighted, geolocation,
	// and failover resource record sets), and TTL (except alias resource record
	// sets, for which the TTL is determined by the AWS resource that you're routing
	// DNS queries to).
	//
	//  To delete the resource record set that is associated with a traffic policy
	// instance, use  DeleteTrafficPolicyInstance . Amazon Route 53will delete the
	// resource record set automatically. If you delete the resource record set
	// by using ChangeResourceRecordSets, Amazon Route 53 doesn't automatically
	// delete the traffic policy instance, and you'll continue to be charged for
	// it even though it's no longer in use.
	//
	//     UPSERT: If a resource record set does not already exist, Amazon Route
	// 53 creates it. If a resource record set does exist, Amazon Route 53 updates
	// it with the values in the request. Amazon Route 53 can update an existing
	// resource record set only when all of the following values match: Name, Type,
	// and SetIdentifier (for weighted, latency, geolocation, and failover resource
	// record sets).
	Action *string `type:"string" required:"true" enum:"ChangeAction"`

	// Information about the resource record set to create or delete.
	ResourceRecordSet *ResourceRecordSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

The information for each resource record set that you want to change.

func (Change) GoString added in v0.6.5 

func (s Change) GoString() string

GoString returns the string representation

func (Change) String added in v0.6.5 

func (s Change) String() string

String returns the string representation

func (*Change) Validate added in v1.1.21 

func (s *Change) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeBatch 

type ChangeBatch struct {

	// Information about the changes to make to the record sets.
	Changes []*Change `locationNameList:"Change" min:"1" type:"list" required:"true"`

	// Optional: Any comments you want to include about a change batch request.
	Comment *string `type:"string"`
	// contains filtered or unexported fields
}

The information for a change request.

func (ChangeBatch) GoString added in v0.6.5 

func (s ChangeBatch) GoString() string

GoString returns the string representation

func (ChangeBatch) String added in v0.6.5 

func (s ChangeBatch) String() string

String returns the string representation

func (*ChangeBatch) Validate added in v1.1.21 

func (s *ChangeBatch) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeBatchRecord added in v1.0.3 

type ChangeBatchRecord struct {

	// A list of changes made in the ChangeBatch.
	Changes []*Change `locationNameList:"Change" min:"1" type:"list"`

	// A complex type that describes change information about changes made to your
	// hosted zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	Comment *string `type:"string"`

	// The ID of the request. Use this ID to track when the change has completed
	// across all Amazon Route 53 DNS servers.
	Id *string `type:"string" required:"true"`

	// The current state of the request. PENDING indicates that this request has
	// not yet been applied to all Amazon Route 53 DNS servers.
	//
	// Valid Values: PENDING | INSYNC
	Status *string `type:"string" required:"true" enum:"ChangeStatus"`

	// The date and time the change was submitted, in the format YYYY-MM-DDThh:mm:ssZ,
	// as specified in the ISO 8601 standard (for example, 2009-11-19T19:37:58Z).
	// The Z after the time indicates that the time is listed in Coordinated Universal
	// Time (UTC).
	SubmittedAt *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The AWS account ID attached to the changes.
	Submitter *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that lists the changes and information for a ChangeBatch.

func (ChangeBatchRecord) GoString added in v1.0.3 

func (s ChangeBatchRecord) GoString() string

GoString returns the string representation

func (ChangeBatchRecord) String added in v1.0.3 

func (s ChangeBatchRecord) String() string

String returns the string representation

type ChangeInfo 

type ChangeInfo struct {

	// A complex type that describes change information about changes made to your
	// hosted zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	Comment *string `type:"string"`

	// The ID of the request.
	Id *string `type:"string" required:"true"`

	// The current state of the request. PENDING indicates that this request has
	// not yet been applied to all Amazon Route 53 DNS servers.
	Status *string `type:"string" required:"true" enum:"ChangeStatus"`

	// The date and time the change request was submitted, in Coordinated Universal
	// Time (UTC) format: YYYY-MM-DDThh:mm:ssZ. For more information, see the Wikipedia
	// entry ISO 8601 (https://en.wikipedia.org/wiki/ISO_8601).
	SubmittedAt *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

A complex type that describes change information about changes made to your hosted zone.

func (ChangeInfo) GoString added in v0.6.5 

func (s ChangeInfo) GoString() string

GoString returns the string representation

func (ChangeInfo) String added in v0.6.5 

func (s ChangeInfo) String() string

String returns the string representation

type ChangeResourceRecordSetsInput 

type ChangeResourceRecordSetsInput struct {

	// A complex type that contains an optional comment and the Changes element.
	ChangeBatch *ChangeBatch `type:"structure" required:"true"`

	// The ID of the hosted zone that contains the resource record sets that you
	// want to change.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains change information for the resource record set.

func (ChangeResourceRecordSetsInput) GoString added in v0.6.5 

func (s ChangeResourceRecordSetsInput) GoString() string

GoString returns the string representation

func (ChangeResourceRecordSetsInput) String added in v0.6.5 

func (s ChangeResourceRecordSetsInput) String() string

String returns the string representation

func (*ChangeResourceRecordSetsInput) Validate added in v1.1.21 

func (s *ChangeResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeResourceRecordSetsOutput 

type ChangeResourceRecordSetsOutput struct {

	// A complex type that contains information about changes made to your hosted
	// zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response for the request.

func (ChangeResourceRecordSetsOutput) GoString added in v0.6.5 

func (s ChangeResourceRecordSetsOutput) GoString() string

GoString returns the string representation

func (ChangeResourceRecordSetsOutput) String added in v0.6.5 

func (s ChangeResourceRecordSetsOutput) String() string

String returns the string representation

type ChangeTagsForResourceInput 

type ChangeTagsForResourceInput struct {

	// A complex type that contains a list of the tags that you want to add to the
	// specified health check or hosted zone and/or the tags for which you want
	// to edit the Value element.
	//
	// You can add a maximum of 10 tags to a health check or a hosted zone.
	AddTags []*Tag `locationNameList:"Tag" min:"1" type:"list"`

	// A complex type that contains a list of the tags that you want to delete from
	// the specified health check or hosted zone. You can specify up to 10 keys.
	RemoveTagKeys []*string `locationNameList:"Key" min:"1" type:"list"`

	// The ID of the resource for which you want to add, change, or delete tags.
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//   The resource type for health checks is healthcheck.
	//
	//   The resource type for hosted zones is hostedzone.
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the tags that you want to add, edit, or delete.

func (ChangeTagsForResourceInput) GoString added in v0.6.5 

func (s ChangeTagsForResourceInput) GoString() string

GoString returns the string representation

func (ChangeTagsForResourceInput) String added in v0.6.5 

func (s ChangeTagsForResourceInput) String() string

String returns the string representation

func (*ChangeTagsForResourceInput) Validate added in v1.1.21 

func (s *ChangeTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeTagsForResourceOutput 

type ChangeTagsForResourceOutput struct {
	// contains filtered or unexported fields
}

Empty response for the request.

func (ChangeTagsForResourceOutput) GoString added in v0.6.5 

func (s ChangeTagsForResourceOutput) GoString() string

GoString returns the string representation

func (ChangeTagsForResourceOutput) String added in v0.6.5 

func (s ChangeTagsForResourceOutput) String() string

String returns the string representation

type CloudWatchAlarmConfiguration added in v1.1.16 

type CloudWatchAlarmConfiguration struct {

	// For the metric that the CloudWatch alarm is associated with, the arithmetic
	// operation that is used for the comparison.
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`

	// For the metric that the CloudWatch alarm is associated with, a complex type
	// that contains information about the dimensions for the metric.For information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference ( http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch Developer Guide.
	Dimensions []*Dimension `locationNameList:"Dimension" type:"list"`

	// For the metric that the CloudWatch alarm is associated with, the number of
	// periods that the metric is compared to the threshold.
	EvaluationPeriods *int64 `min:"1" type:"integer" required:"true"`

	// The name of the CloudWatch metric that the alarm is associated with.
	MetricName *string `min:"1" type:"string" required:"true"`

	// The namespace of the metric that the alarm is associated with. For more information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch Developer Guide.
	Namespace *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the duration
	// of one evaluation period in seconds.
	Period *int64 `min:"60" type:"integer" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the statistic
	// that is applied to the metric.
	Statistic *string `type:"string" required:"true" enum:"Statistic"`

	// For the metric that the CloudWatch alarm is associated with, the value the
	// metric is compared with.
	Threshold *float64 `type:"double" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the CloudWatch alarm that Amazon Route 53 is monitoring for this health check.

func (CloudWatchAlarmConfiguration) GoString added in v1.1.16 

func (s CloudWatchAlarmConfiguration) GoString() string

GoString returns the string representation

func (CloudWatchAlarmConfiguration) String added in v1.1.16 

func (s CloudWatchAlarmConfiguration) String() string

String returns the string representation

type CreateHealthCheckInput 

type CreateHealthCheckInput struct {

	// A unique string that identifies the request and that allows failed CreateHealthCheck
	// requests to be retried without the risk of executing the operation twice.
	// You must use a unique CallerReference string every time you create a health
	// check.
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains the response to a CreateHealthCheck request.
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the health check request information.

func (CreateHealthCheckInput) GoString added in v0.6.5 

func (s CreateHealthCheckInput) GoString() string

GoString returns the string representation

func (CreateHealthCheckInput) String added in v0.6.5 

func (s CreateHealthCheckInput) String() string

String returns the string representation

func (*CreateHealthCheckInput) Validate added in v1.1.21 

func (s *CreateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHealthCheckOutput 

type CreateHealthCheckOutput struct {

	// A complex type that contains identifying information about the health check.
	HealthCheck *HealthCheck `type:"structure" required:"true"`

	// The unique URL representing the new health check.
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the new health check.

func (CreateHealthCheckOutput) GoString added in v0.6.5 

func (s CreateHealthCheckOutput) GoString() string

GoString returns the string representation

func (CreateHealthCheckOutput) String added in v0.6.5 

func (s CreateHealthCheckOutput) String() string

String returns the string representation

type CreateHostedZoneInput 

type CreateHostedZoneInput struct {

	// A unique string that identifies the request and that allows failed CreateHostedZone
	// requests to be retried without the risk of executing the operation twice.
	// You must use a unique CallerReference string every time you create a hosted
	// zone. CallerReference can be any unique string, for example, a date/time
	// stamp.
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to associate a reusable delegation set with this hosted zone,
	// the ID that Amazon Route 53 assigned to the reusable delegation set when
	// you created it. For more information about reusable delegation sets, see
	// CreateReusableDelegationSet.
	//
	//  Type  String
	//
	//  Default  None
	//
	//  Parent   CreatedHostedZoneRequest
	DelegationSetId *string `type:"string"`

	// (Optional) A complex type that contains an optional comment about your hosted
	// zone. If you don't want to specify a comment, omit both the HostedZoneConfig
	// and Comment elements.
	HostedZoneConfig *HostedZoneConfig `type:"structure"`

	// The name of the domain. For resource record types that include a domain name,
	// specify a fully qualified domain name, for example, www.example.com. The
	// trailing dot is optional; Amazon Route 53 assumes that the domain name is
	// fully qualified. This means that Amazon Route 53 treats www.example.com (without
	// a trailing dot) and www.example.com. (with a trailing dot) as identical.
	//
	// If you're creating a public hosted zone, this is the name you have registered
	// with your DNS registrar. If your domain name is registered with a registrar
	// other than Amazon Route 53, change the name servers for your domain to the
	// set of NameServers that CreateHostedZone returns in the DelegationSet element.
	Name *string `type:"string" required:"true"`

	// The VPC that you want your hosted zone to be associated with. By providing
	// this parameter, your newly created hosted cannot be resolved anywhere other
	// than the given VPC.
	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type containing the hosted zone request information.

func (CreateHostedZoneInput) GoString added in v0.6.5 

func (s CreateHostedZoneInput) GoString() string

GoString returns the string representation

func (CreateHostedZoneInput) String added in v0.6.5 

func (s CreateHostedZoneInput) String() string

String returns the string representation

func (*CreateHostedZoneInput) Validate added in v1.1.21 

func (s *CreateHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHostedZoneOutput 

type CreateHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`

	// A complex type that describes the name servers for this hosted zone.
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// A complex type that contains general information about the hosted zone.
	HostedZone *HostedZone `type:"structure" required:"true"`

	// The unique URL representing the new hosted zone.
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the hosted zone.

func (CreateHostedZoneOutput) GoString added in v0.6.5 

func (s CreateHostedZoneOutput) GoString() string

GoString returns the string representation

func (CreateHostedZoneOutput) String added in v0.6.5 

func (s CreateHostedZoneOutput) String() string

String returns the string representation

type CreateReusableDelegationSetInput 

type CreateReusableDelegationSetInput struct {

	// A unique string that identifies the request, and that allows you to retry
	// failed CreateReusableDelegationSet requests without the risk of executing
	// the operation twice. You must use a unique CallerReference string every time
	// you submit a CreateReusableDelegationSet request. CallerReference can be
	// any unique string, for example a date/time stamp.
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to mark the delegation set for an existing hosted zone as reusable,
	// the ID for that hosted zone.
	HostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

func (CreateReusableDelegationSetInput) GoString added in v0.6.5 

func (s CreateReusableDelegationSetInput) GoString() string

GoString returns the string representation

func (CreateReusableDelegationSetInput) String added in v0.6.5 

func (s CreateReusableDelegationSetInput) String() string

String returns the string representation

func (*CreateReusableDelegationSetInput) Validate added in v1.1.21 

func (s *CreateReusableDelegationSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateReusableDelegationSetOutput 

type CreateReusableDelegationSetOutput struct {

	// A complex type that contains name server information.
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// The unique URL representing the new reusbale delegation set.
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (CreateReusableDelegationSetOutput) GoString added in v0.6.5 

func (s CreateReusableDelegationSetOutput) GoString() string

GoString returns the string representation

func (CreateReusableDelegationSetOutput) String added in v0.6.5 

func (s CreateReusableDelegationSetOutput) String() string

String returns the string representation

type CreateTrafficPolicyInput added in v1.0.3 

type CreateTrafficPolicyInput struct {

	// (Optional) Any comments that you want to include about the traffic policy.
	Comment *string `type:"string"`

	// The definition of this traffic policy in JSON format. For more information,
	// see Traffic Policy Document Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/api-policies-traffic-policy-document-format.html)
	// in the Amazon Route 53 API Reference.
	Document *string `type:"string" required:"true"`

	// The name of the traffic policy.
	Name *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy that you want to create.

func (CreateTrafficPolicyInput) GoString added in v1.0.3 

func (s CreateTrafficPolicyInput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyInput) String added in v1.0.3 

func (s CreateTrafficPolicyInput) String() string

String returns the string representation

func (*CreateTrafficPolicyInput) Validate added in v1.1.21 

func (s *CreateTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceInput added in v1.0.3 

type CreateTrafficPolicyInstanceInput struct {

	// The ID of the hosted zone in which you want Amazon Route 53 to create resource
	// record sets by using the configuration in a traffic policy.
	HostedZoneId *string `type:"string" required:"true"`

	// The domain name (such as example.com) or subdomain name (such as www.example.com)
	// for which Amazon Route 53 responds to DNS queries by using the resource record
	// sets that Amazon Route 53 creates for this traffic policy instance.
	Name *string `type:"string" required:"true"`

	// (Optional) The TTL that you want Amazon Route 53 to assign to all of the
	// resource record sets that it creates in the specified hosted zone.
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want to use to create resource record
	// sets in the specified hosted zone.
	TrafficPolicyId *string `type:"string" required:"true"`

	// The version of the traffic policy that you want to use to create resource
	// record sets in the specified hosted zone.
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to create based on a specified traffic policy.

func (CreateTrafficPolicyInstanceInput) GoString added in v1.0.3 

func (s CreateTrafficPolicyInstanceInput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyInstanceInput) String added in v1.0.3 

func (s CreateTrafficPolicyInstanceInput) String() string

String returns the string representation

func (*CreateTrafficPolicyInstanceInput) Validate added in v1.1.21 

func (s *CreateTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceOutput added in v1.0.3 

type CreateTrafficPolicyInstanceOutput struct {

	// A unique URL that represents a new traffic policy instance.
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy instance.
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyInstance request.

func (CreateTrafficPolicyInstanceOutput) GoString added in v1.0.3 

func (s CreateTrafficPolicyInstanceOutput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyInstanceOutput) String added in v1.0.3 

func (s CreateTrafficPolicyInstanceOutput) String() string

String returns the string representation

type CreateTrafficPolicyOutput added in v1.0.3 

type CreateTrafficPolicyOutput struct {
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy.
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicy request.

func (CreateTrafficPolicyOutput) GoString added in v1.0.3 

func (s CreateTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyOutput) String added in v1.0.3 

func (s CreateTrafficPolicyOutput) String() string

String returns the string representation

type CreateTrafficPolicyVersionInput added in v1.0.3 

type CreateTrafficPolicyVersionInput struct {

	// The comment that you specified in the CreateTrafficPolicyVersion request,
	// if any.
	Comment *string `type:"string"`

	// The definition of this version of the traffic policy, in JSON format. You
	// specified the JSON in the CreateTrafficPolicyVersion request. For more information
	// about the JSON format, see CreateTrafficPolicy.
	Document *string `type:"string" required:"true"`

	// The ID of the traffic policy for which you want to create a new version.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy for which you want to create a new version.

func (CreateTrafficPolicyVersionInput) GoString added in v1.0.3 

func (s CreateTrafficPolicyVersionInput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyVersionInput) String added in v1.0.3 

func (s CreateTrafficPolicyVersionInput) String() string

String returns the string representation

func (*CreateTrafficPolicyVersionInput) Validate added in v1.1.21 

func (s *CreateTrafficPolicyVersionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyVersionOutput added in v1.0.3 

type CreateTrafficPolicyVersionOutput struct {
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new version of the traffic
	// policy.
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyVersion request.

func (CreateTrafficPolicyVersionOutput) GoString added in v1.0.3 

func (s CreateTrafficPolicyVersionOutput) GoString() string

GoString returns the string representation

func (CreateTrafficPolicyVersionOutput) String added in v1.0.3 

func (s CreateTrafficPolicyVersionOutput) String() string

String returns the string representation

type DelegationSet 

type DelegationSet struct {
	CallerReference *string `min:"1" type:"string"`

	Id *string `type:"string"`

	// A complex type that contains a list of the authoritative name servers for
	// the hosted zone.
	NameServers []*string `locationNameList:"NameServer" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that describes the name servers for this hosted zone.

func (DelegationSet) GoString added in v0.6.5 

func (s DelegationSet) GoString() string

GoString returns the string representation

func (DelegationSet) String added in v0.6.5 

func (s DelegationSet) String() string

String returns the string representation

type DeleteHealthCheckInput 

type DeleteHealthCheckInput struct {
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action deletes a health check. Send a DELETE request to the /2013-04-01/DeleteHealthCheckRequest resource.

func (DeleteHealthCheckInput) GoString added in v0.6.5 

func (s DeleteHealthCheckInput) GoString() string

GoString returns the string representation

func (DeleteHealthCheckInput) String added in v0.6.5 

func (s DeleteHealthCheckInput) String() string

String returns the string representation

func (*DeleteHealthCheckInput) Validate added in v1.1.21 

func (s *DeleteHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHealthCheckOutput 

type DeleteHealthCheckOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteHealthCheckOutput) GoString added in v0.6.5 

func (s DeleteHealthCheckOutput) GoString() string

GoString returns the string representation

func (DeleteHealthCheckOutput) String added in v0.6.5 

func (s DeleteHealthCheckOutput) String() string

String returns the string representation

type DeleteHostedZoneInput 

type DeleteHostedZoneInput struct {

	// The ID of the hosted zone you want to delete.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the hosted zone that you want to delete.

func (DeleteHostedZoneInput) GoString added in v0.6.5 

func (s DeleteHostedZoneInput) GoString() string

GoString returns the string representation

func (DeleteHostedZoneInput) String added in v0.6.5 

func (s DeleteHostedZoneInput) String() string

String returns the string representation

func (*DeleteHostedZoneInput) Validate added in v1.1.21 

func (s *DeleteHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHostedZoneOutput 

type DeleteHostedZoneOutput struct {

	// A complex type that contains the ID, the status, and the date and time of
	// your delete request.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request.

func (DeleteHostedZoneOutput) GoString added in v0.6.5 

func (s DeleteHostedZoneOutput) GoString() string

GoString returns the string representation

func (DeleteHostedZoneOutput) String added in v0.6.5 

func (s DeleteHostedZoneOutput) String() string

String returns the string representation

type DeleteReusableDelegationSetInput 

type DeleteReusableDelegationSetInput struct {

	// The ID of the reusable delegation set you want to delete.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the information for the delete request.

func (DeleteReusableDelegationSetInput) GoString added in v0.6.5 

func (s DeleteReusableDelegationSetInput) GoString() string

GoString returns the string representation

func (DeleteReusableDelegationSetInput) String added in v0.6.5 

func (s DeleteReusableDelegationSetInput) String() string

String returns the string representation

func (*DeleteReusableDelegationSetInput) Validate added in v1.1.21 

func (s *DeleteReusableDelegationSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteReusableDelegationSetOutput 

type DeleteReusableDelegationSetOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteReusableDelegationSetOutput) GoString added in v0.6.5 

func (s DeleteReusableDelegationSetOutput) GoString() string

GoString returns the string representation

func (DeleteReusableDelegationSetOutput) String added in v0.6.5 

func (s DeleteReusableDelegationSetOutput) String() string

String returns the string representation

type DeleteTrafficPolicyInput added in v1.0.3 

type DeleteTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to delete.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The version number of the traffic policy that you want to delete.
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a specified traffic policy version.

func (DeleteTrafficPolicyInput) GoString added in v1.0.3 

func (s DeleteTrafficPolicyInput) GoString() string

GoString returns the string representation

func (DeleteTrafficPolicyInput) String added in v1.0.3 

func (s DeleteTrafficPolicyInput) String() string

String returns the string representation

func (*DeleteTrafficPolicyInput) Validate added in v1.1.21 

func (s *DeleteTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceInput added in v1.0.3 

type DeleteTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to delete.
	//
	//  When you delete a traffic policy instance, Amazon Route 53 also deletes
	// all of the resource record sets that were created when you created the traffic
	// policy instance.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy instance that you want to delete.

func (DeleteTrafficPolicyInstanceInput) GoString added in v1.0.3 

func (s DeleteTrafficPolicyInstanceInput) GoString() string

GoString returns the string representation

func (DeleteTrafficPolicyInstanceInput) String added in v1.0.3 

func (s DeleteTrafficPolicyInstanceInput) String() string

String returns the string representation

func (*DeleteTrafficPolicyInstanceInput) Validate added in v1.1.21 

func (s *DeleteTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceOutput added in v1.0.3 

type DeleteTrafficPolicyInstanceOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteTrafficPolicyInstanceOutput) GoString added in v1.0.3 

func (s DeleteTrafficPolicyInstanceOutput) GoString() string

GoString returns the string representation

func (DeleteTrafficPolicyInstanceOutput) String added in v1.0.3 

func (s DeleteTrafficPolicyInstanceOutput) String() string

String returns the string representation

type DeleteTrafficPolicyOutput added in v1.0.3 

type DeleteTrafficPolicyOutput struct {
	// contains filtered or unexported fields
}

An empty element.

func (DeleteTrafficPolicyOutput) GoString added in v1.0.3 

func (s DeleteTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (DeleteTrafficPolicyOutput) String added in v1.0.3 

func (s DeleteTrafficPolicyOutput) String() string

String returns the string representation

type Dimension added in v1.1.16 

type Dimension struct {

	// For the metric that the CloudWatch alarm is associated with, the name of
	// one dimension.
	Name *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the value of
	// one dimension.
	Value *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

For the metric that the CloudWatch alarm is associated with, a complex type that contains information about one dimension.

func (Dimension) GoString added in v1.1.16 

func (s Dimension) GoString() string

GoString returns the string representation

func (Dimension) String added in v1.1.16 

func (s Dimension) String() string

String returns the string representation

type DisassociateVPCFromHostedZoneInput 

type DisassociateVPCFromHostedZoneInput struct {

	// Optional: A comment about the disassociation request.
	Comment *string `type:"string"`

	// The ID of the VPC that you want to disassociate from an Amazon Route 53 hosted
	// zone.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type containing information about the Amazon VPC that you're disassociating
	// from the specified hosted zone.
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the VPC and the hosted zone that you want to disassociate.

func (DisassociateVPCFromHostedZoneInput) GoString added in v0.6.5 

func (s DisassociateVPCFromHostedZoneInput) GoString() string

GoString returns the string representation

func (DisassociateVPCFromHostedZoneInput) String added in v0.6.5 

func (s DisassociateVPCFromHostedZoneInput) String() string

String returns the string representation

func (*DisassociateVPCFromHostedZoneInput) Validate added in v1.1.21 

func (s *DisassociateVPCFromHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateVPCFromHostedZoneOutput 

type DisassociateVPCFromHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the disassociate request.

func (DisassociateVPCFromHostedZoneOutput) GoString added in v0.6.5 

func (s DisassociateVPCFromHostedZoneOutput) GoString() string

GoString returns the string representation

func (DisassociateVPCFromHostedZoneOutput) String added in v0.6.5 

func (s DisassociateVPCFromHostedZoneOutput) String() string

String returns the string representation

type GeoLocation 

type GeoLocation struct {

	// The two-letter code for the continent.
	//
	// Valid values: AF | AN | AS | EU | OC | NA | SA
	//
	// Constraint: Specifying ContinentCode with either CountryCode or SubdivisionCode
	// returns an InvalidInput error.
	ContinentCode *string `min:"2" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a geo location.

func (GeoLocation) GoString added in v0.6.5 

func (s GeoLocation) GoString() string

GoString returns the string representation

func (GeoLocation) String added in v0.6.5 

func (s GeoLocation) String() string

String returns the string representation

func (*GeoLocation) Validate added in v1.1.21 

func (s *GeoLocation) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GeoLocationDetails 

type GeoLocationDetails struct {

	// The two-letter code for the continent.
	ContinentCode *string `min:"2" type:"string"`

	// The full name of the continent.
	ContinentName *string `min:"1" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The name of the country.
	CountryName *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`

	// The full name of the subdivision, for example, a state in the United States
	// or a province in Canada.
	SubdivisionName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the codes and full continent, country, and subdivision names for the specified geolocation code.

func (GeoLocationDetails) GoString added in v0.6.5 

func (s GeoLocationDetails) GoString() string

GoString returns the string representation

func (GeoLocationDetails) String added in v0.6.5 

func (s GeoLocationDetails) String() string

String returns the string representation

type GetChangeDetailsInput added in v1.0.3 

type GetChangeDetailsInput struct {

	// The ID of the change batch. This is the value that you specified in the change
	// ID parameter when you submitted the request.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetChangeDetails request.

func (GetChangeDetailsInput) GoString added in v1.0.3 

func (s GetChangeDetailsInput) GoString() string

GoString returns the string representation

func (GetChangeDetailsInput) String added in v1.0.3 

func (s GetChangeDetailsInput) String() string

String returns the string representation

func (*GetChangeDetailsInput) Validate added in v1.1.21 

func (s *GetChangeDetailsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetChangeDetailsOutput added in v1.0.3 

type GetChangeDetailsOutput struct {

	// A complex type that contains information about the specified change batch,
	// including the change batch ID, the status of the change, and the contained
	// changes.
	ChangeBatchRecord *ChangeBatchRecord `deprecated:"true" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the ChangeBatchRecord element.

func (GetChangeDetailsOutput) GoString added in v1.0.3 

func (s GetChangeDetailsOutput) GoString() string

GoString returns the string representation

func (GetChangeDetailsOutput) String added in v1.0.3 

func (s GetChangeDetailsOutput) String() string

String returns the string representation

type GetChangeInput 

type GetChangeInput struct {

	// The ID of the change batch request. The value that you specify here is the
	// value that ChangeResourceRecordSets returned in the Id element when you submitted
	// the request.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetChange request.

func (GetChangeInput) GoString added in v0.6.5 

func (s GetChangeInput) GoString() string

GoString returns the string representation

func (GetChangeInput) String added in v0.6.5 

func (s GetChangeInput) String() string

String returns the string representation

func (*GetChangeInput) Validate added in v1.1.21 

func (s *GetChangeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetChangeOutput 

type GetChangeOutput struct {

	// A complex type that contains information about the specified change batch.
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the ChangeInfo element.

func (GetChangeOutput) GoString added in v0.6.5 

func (s GetChangeOutput) GoString() string

GoString returns the string representation

func (GetChangeOutput) String added in v0.6.5 

func (s GetChangeOutput) String() string

String returns the string representation

type GetCheckerIpRangesInput added in v0.9.5 

type GetCheckerIpRangesInput struct {
	// contains filtered or unexported fields
}

Empty request.

func (GetCheckerIpRangesInput) GoString added in v0.9.5 

func (s GetCheckerIpRangesInput) GoString() string

GoString returns the string representation

func (GetCheckerIpRangesInput) String added in v0.9.5 

func (s GetCheckerIpRangesInput) String() string

String returns the string representation

type GetCheckerIpRangesOutput added in v0.9.5 

type GetCheckerIpRangesOutput struct {

	// A complex type that contains sorted list of IP ranges in CIDR format for
	// Amazon Route 53 health checkers.
	CheckerIpRanges []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the CheckerIpRanges element.

func (GetCheckerIpRangesOutput) GoString added in v0.9.5 

func (s GetCheckerIpRangesOutput) GoString() string

GoString returns the string representation

func (GetCheckerIpRangesOutput) String added in v0.9.5 

func (s GetCheckerIpRangesOutput) String() string

String returns the string representation

type GetGeoLocationInput 

type GetGeoLocationInput struct {

	// Amazon Route 53 supports the following contintent codes:
	//
	//    AF: Africa
	//
	//    AN: Antarctica
	//
	//    AS: Asia
	//
	//    EU: Europe
	//
	//    OC: Oceania
	//
	//    NA: North America
	//
	//    SA: South America
	ContinentCode *string `location:"querystring" locationName:"continentcode" min:"2" type:"string"`

	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	CountryCode *string `location:"querystring" locationName:"countrycode" min:"1" type:"string"`

	// Amazon Route 53 uses the one- to three-letter subdivision codes that are
	// specified in ISO standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	// Amazon Route 53 doesn't support subdivision codes for all countries. If you
	// specify SubdivisionCode, you must also specify CountryCode.
	SubdivisionCode *string `location:"querystring" locationName:"subdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to get a geo location.

func (GetGeoLocationInput) GoString added in v0.6.5 

func (s GetGeoLocationInput) GoString() string

GoString returns the string representation

func (GetGeoLocationInput) String added in v0.6.5 

func (s GetGeoLocationInput) String() string

String returns the string representation

func (*GetGeoLocationInput) Validate added in v1.1.21 

func (s *GetGeoLocationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetGeoLocationOutput 

type GetGeoLocationOutput struct {

	// A complex type that contains the codes and full continent, country, and subdivision
	// names for the specified geolocation code.
	GeoLocationDetails *GeoLocationDetails `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the specified geolocation code.

func (GetGeoLocationOutput) GoString added in v0.6.5 

func (s GetGeoLocationOutput) GoString() string

GoString returns the string representation

func (GetGeoLocationOutput) String added in v0.6.5 

func (s GetGeoLocationOutput) String() string

String returns the string representation

type GetHealthCheckCountInput 

type GetHealthCheckCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your health checks, send a GET request to the /2013-04-01/healthcheckcount resource.

func (GetHealthCheckCountInput) GoString added in v0.6.5 

func (s GetHealthCheckCountInput) GoString() string

GoString returns the string representation

func (GetHealthCheckCountInput) String added in v0.6.5 

func (s GetHealthCheckCountInput) String() string

String returns the string representation

type GetHealthCheckCountOutput 

type GetHealthCheckCountOutput struct {

	// The number of health checks associated with the current AWS account.
	HealthCheckCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a healthcheckcount request.

func (GetHealthCheckCountOutput) GoString added in v0.6.5 

func (s GetHealthCheckCountOutput) GoString() string

GoString returns the string representation

func (GetHealthCheckCountOutput) String added in v0.6.5 

func (s GetHealthCheckCountOutput) String() string

String returns the string representation

type GetHealthCheckInput 

type GetHealthCheckInput struct {

	// The identifier that Amazon Route 53 assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action gets information about a specified health check.

Send a GET request to the /Amazon Route 53 API version/gethealthcheckrequest resource.

For information about getting information about a health check using the Amazon Route 53 console, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the Amazon Route 53 Developer Guide.

func (GetHealthCheckInput) GoString added in v0.6.5 

func (s GetHealthCheckInput) GoString() string

GoString returns the string representation

func (GetHealthCheckInput) String added in v0.6.5 

func (s GetHealthCheckInput) String() string

String returns the string representation

func (*GetHealthCheckInput) Validate added in v1.1.21 

func (s *GetHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonInput 

type GetHealthCheckLastFailureReasonInput struct {

	// The ID for the health check for which you want the last failure reason. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action gets the reason that a specified health check failed most recently.

To get the reason for the last failure of a health check, send a GET request to the /2013-04-01/healthcheck/health check ID/lastfailurereason resource.

For information about viewing the last failure reason for a health check using the Amazon Route 53 console, see Viewing Health Check Status and the Reason for Health Check Failures (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-monitor-view-status.html) in the Amazon Route 53 Developer Guide.

func (GetHealthCheckLastFailureReasonInput) GoString added in v0.6.5 

func (s GetHealthCheckLastFailureReasonInput) GoString() string

GoString returns the string representation

func (GetHealthCheckLastFailureReasonInput) String added in v0.6.5 

func (s GetHealthCheckLastFailureReasonInput) String() string

String returns the string representation

func (*GetHealthCheckLastFailureReasonInput) Validate added in v1.1.21 

func (s *GetHealthCheckLastFailureReasonInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonOutput 

type GetHealthCheckLastFailureReasonOutput struct {

	// A list that contains one Observation element for each Amazon Route 53 health
	// checker that is reporting a last failure reason.
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheckLastFailureReason request.

func (GetHealthCheckLastFailureReasonOutput) GoString added in v0.6.5 

func (s GetHealthCheckLastFailureReasonOutput) GoString() string

GoString returns the string representation

func (GetHealthCheckLastFailureReasonOutput) String added in v0.6.5 

func (s GetHealthCheckLastFailureReasonOutput) String() string

String returns the string representation

type GetHealthCheckOutput 

type GetHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request.

func (GetHealthCheckOutput) GoString added in v0.6.5 

func (s GetHealthCheckOutput) GoString() string

GoString returns the string representation

func (GetHealthCheckOutput) String added in v0.6.5 

func (s GetHealthCheckOutput) String() string

String returns the string representation

type GetHealthCheckStatusInput 

type GetHealthCheckStatusInput struct {

	// If you want Amazon Route 53 to return this resource record set in response
	// to a DNS query only when a health check is passing, include the HealthCheckId
	// element and specify the ID of the applicable health check.
	//
	// Amazon Route 53 determines whether a resource record set is healthy by periodically
	// sending a request to the endpoint that is specified in the health check.
	// If that endpoint returns an HTTP status code of 2xx or 3xx, the endpoint
	// is healthy. If the endpoint returns an HTTP status code of 400 or greater,
	// or if the endpoint doesn't respond for a certain amount of time, Amazon Route
	// 53 considers the endpoint unhealthy and also considers the resource record
	// set unhealthy.
	//
	// The HealthCheckId element is only useful when Amazon Route 53 is choosing
	// between two or more resource record sets to respond to a DNS query, and you
	// want Amazon Route 53 to base the choice in part on the status of a health
	// check. Configuring health checks only makes sense in the following configurations:
	//
	//   You're checking the health of the resource record sets in a weighted,
	// latency, geolocation, or failover resource record set, and you specify health
	// check IDs for all of the resource record sets. If the health check for one
	// resource record set specifies an endpoint that is not healthy, Amazon Route
	// 53 stops responding to queries using the value for that resource record set.
	//
	//   You set EvaluateTargetHealth to true for the resource record sets in an
	// alias, weighted alias, latency alias, geolocation alias, or failover alias
	// resource record set, and you specify health check IDs for all of the resource
	// record sets that are referenced by the alias resource record sets. For more
	// information about this configuration, see EvaluateTargetHealth.
	//
	// Amazon Route 53 doesn't check the health of the endpoint specified in the
	// resource record set, for example, the endpoint specified by the IP address
	// in the Value element. When you add a HealthCheckId element to a resource
	// record set, Amazon Route 53 checks the health of the endpoint that you specified
	// in the health check.
	//
	//   For geolocation resource record sets, if an endpoint is unhealthy, Amazon
	// Route 53 looks for a resource record set for the larger, associated geographic
	// region. For example, suppose you have resource record sets for a state in
	// the United States, for the United States, for North America, and for all
	// locations. If the endpoint for the state resource record set is unhealthy,
	// Amazon Route 53 checks the resource record sets for the United States, for
	// North America, and for all locations (a resource record set for which the
	// value of CountryCode is *), in that order, until it finds a resource record
	// set for which the endpoint is healthy.
	//
	// If your health checks specify the endpoint only by domain name, we recommend
	// that you create a separate health check for each endpoint. For example, create
	// a health check for each HTTP server that is serving content for www.example.com.
	// For the value of FullyQualifiedDomainName, specify the domain name of the
	// server (such as us-east-1-www.example.com), not the name of the resource
	// record sets (example.com).
	//
	//  In this configuration, if you create a health check for which the value
	// of FullyQualifiedDomainName matches the name of the resource record sets
	// and then associate the health check with those resource record sets, health
	// check results will be unpredictable.
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to get health check status for a health check.

func (GetHealthCheckStatusInput) GoString added in v0.6.5 

func (s GetHealthCheckStatusInput) GoString() string

GoString returns the string representation

func (GetHealthCheckStatusInput) String added in v0.6.5 

func (s GetHealthCheckStatusInput) String() string

String returns the string representation

func (*GetHealthCheckStatusInput) Validate added in v1.1.21 

func (s *GetHealthCheckStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckStatusOutput 

type GetHealthCheckStatusOutput struct {

	// A list that contains one HealthCheckObservation element for each Amazon Route
	// 53 health checker that is reporting a status about the health check endpoint.
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request.

func (GetHealthCheckStatusOutput) GoString added in v0.6.5 

func (s GetHealthCheckStatusOutput) GoString() string

GoString returns the string representation

func (GetHealthCheckStatusOutput) String added in v0.6.5 

func (s GetHealthCheckStatusOutput) String() string

String returns the string representation

type GetHostedZoneCountInput 

type GetHostedZoneCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your hosted zones, send a GET request to the /2013-04-01/hostedzonecount resource.

func (GetHostedZoneCountInput) GoString added in v0.6.5 

func (s GetHostedZoneCountInput) GoString() string

GoString returns the string representation

func (GetHostedZoneCountInput) String added in v0.6.5 

func (s GetHostedZoneCountInput) String() string

String returns the string representation

type GetHostedZoneCountOutput 

type GetHostedZoneCountOutput struct {

	// The total number of public and private hosted zones associated with the current
	// AWS account.
	HostedZoneCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a hostedzonecount request.

func (GetHostedZoneCountOutput) GoString added in v0.6.5 

func (s GetHostedZoneCountOutput) GoString() string

GoString returns the string representation

func (GetHostedZoneCountOutput) String added in v0.6.5 

func (s GetHostedZoneCountOutput) String() string

String returns the string representation

type GetHostedZoneInput 

type GetHostedZoneInput struct {

	// The ID of the hosted zone for which you want to get a list of the name servers
	// in the delegation set.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetHostedZone request.

func (GetHostedZoneInput) GoString added in v0.6.5 

func (s GetHostedZoneInput) GoString() string

GoString returns the string representation

func (GetHostedZoneInput) String added in v0.6.5 

func (s GetHostedZoneInput) String() string

String returns the string representation

func (*GetHostedZoneInput) Validate added in v1.1.21 

func (s *GetHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHostedZoneOutput 

type GetHostedZoneOutput struct {

	// A complex type that describes the name servers for this hosted zone.
	DelegationSet *DelegationSet `type:"structure"`

	// A complex type that contains general information about the hosted zone.
	HostedZone *HostedZone `type:"structure" required:"true"`

	// A complex type that contains information about VPCs associated with the specified
	// hosted zone.
	VPCs []*VPC `locationNameList:"VPC" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the hosted zone.

func (GetHostedZoneOutput) GoString added in v0.6.5 

func (s GetHostedZoneOutput) GoString() string

GoString returns the string representation

func (GetHostedZoneOutput) String added in v0.6.5 

func (s GetHostedZoneOutput) String() string

String returns the string representation

type GetReusableDelegationSetInput 

type GetReusableDelegationSetInput struct {

	// The ID of the reusable delegation set for which you want to get a list of
	// the name server.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetReusableDelegationSet request.

func (GetReusableDelegationSetInput) GoString added in v0.6.5 

func (s GetReusableDelegationSetInput) GoString() string

GoString returns the string representation

func (GetReusableDelegationSetInput) String added in v0.6.5 

func (s GetReusableDelegationSetInput) String() string

String returns the string representation

func (*GetReusableDelegationSetInput) Validate added in v1.1.21 

func (s *GetReusableDelegationSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetReusableDelegationSetOutput 

type GetReusableDelegationSetOutput struct {

	// A complex type that contains information about the reusable delegation set.
	DelegationSet *DelegationSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the GetReusableDelegationSet request.

func (GetReusableDelegationSetOutput) GoString added in v0.6.5 

func (s GetReusableDelegationSetOutput) GoString() string

GoString returns the string representation

func (GetReusableDelegationSetOutput) String added in v0.6.5 

func (s GetReusableDelegationSetOutput) String() string

String returns the string representation

type GetTrafficPolicyInput added in v1.0.3 

type GetTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to get information about.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The version number of the traffic policy that you want to get information
	// about.
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specific traffic policy version. To get the information, send a GET request to the /2013-04-01/trafficpolicy resource, and specify the ID and the version of the traffic policy.

func (GetTrafficPolicyInput) GoString added in v1.0.3 

func (s GetTrafficPolicyInput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyInput) String added in v1.0.3 

func (s GetTrafficPolicyInput) String() string

String returns the string representation

func (*GetTrafficPolicyInput) Validate added in v1.1.21 

func (s *GetTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceCountInput added in v1.0.3 

type GetTrafficPolicyInstanceCountInput struct {
	// contains filtered or unexported fields
}

To retrieve a count of all your traffic policy instances, send a GET request to the /2013-04-01/trafficpolicyinstancecount resource.

func (GetTrafficPolicyInstanceCountInput) GoString added in v1.0.3 

func (s GetTrafficPolicyInstanceCountInput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyInstanceCountInput) String added in v1.0.3 

func (s GetTrafficPolicyInstanceCountInput) String() string

String returns the string representation

type GetTrafficPolicyInstanceCountOutput added in v1.0.3 

type GetTrafficPolicyInstanceCountOutput struct {

	// The number of traffic policy instances that are associated with the current
	// AWS account.
	TrafficPolicyInstanceCount *int64 `type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (GetTrafficPolicyInstanceCountOutput) GoString added in v1.0.3 

func (s GetTrafficPolicyInstanceCountOutput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyInstanceCountOutput) String added in v1.0.3 

func (s GetTrafficPolicyInstanceCountOutput) String() string

String returns the string representation

type GetTrafficPolicyInstanceInput added in v1.0.3 

type GetTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to get information about.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specified traffic policy instance.

To get information about a traffic policy instance, send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance/Id resource.

func (GetTrafficPolicyInstanceInput) GoString added in v1.0.3 

func (s GetTrafficPolicyInstanceInput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyInstanceInput) String added in v1.0.3 

func (s GetTrafficPolicyInstanceInput) String() string

String returns the string representation

func (*GetTrafficPolicyInstanceInput) Validate added in v1.1.21 

func (s *GetTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceOutput added in v1.0.3 

type GetTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the traffic policy instance.
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (GetTrafficPolicyInstanceOutput) GoString added in v1.0.3 

func (s GetTrafficPolicyInstanceOutput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyInstanceOutput) String added in v1.0.3 

func (s GetTrafficPolicyInstanceOutput) String() string

String returns the string representation

type GetTrafficPolicyOutput added in v1.0.3 

type GetTrafficPolicyOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (GetTrafficPolicyOutput) GoString added in v1.0.3 

func (s GetTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (GetTrafficPolicyOutput) String added in v1.0.3 

func (s GetTrafficPolicyOutput) String() string

String returns the string representation

type HealthCheck 

type HealthCheck struct {

	// A unique string that you specified when you created the health check.
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains information about the CloudWatch alarm that
	// Amazon Route 53 is monitoring for this health check.
	CloudWatchAlarmConfiguration *CloudWatchAlarmConfiguration `type:"structure"`

	// A complex type that contains detailed information about one health check.
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`

	// The version of the health check. You can optionally pass this value in a
	// call to UpdateHealthCheck to prevent overwriting another change to the health
	// check.
	HealthCheckVersion *int64 `min:"1" type:"long" required:"true"`

	// The identifier that Amazon Route 53assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	Id *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about one health check that is associated with the current AWS account.

func (HealthCheck) GoString added in v0.6.5 

func (s HealthCheck) GoString() string

GoString returns the string representation

func (HealthCheck) String added in v0.6.5 

func (s HealthCheck) String() string

String returns the string representation

type HealthCheckConfig 

type HealthCheckConfig struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// (CALCULATED Health Checks Only) A complex type that contains one ChildHealthCheck
	// element for each health check that you want to associate with a CALCULATED
	// health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the
	// client_hello message. If you don't enable SNI, the status of the health check
	// will be SSL alert handshake_failure. A health check can also have that status
	// for other reasons. If SNI is enabled and you're still getting the error,
	// check the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	//  If you specify IPAddress:
	//
	// The value that you want Amazon Route 53 to pass in the Host header in all
	// health checks except TCP health checks. This is typically the fully qualified
	// DNS name of the website that you are attempting to health check. When Amazon
	// Route 53 checks the health of an endpoint, here is how it constructs the
	// Host header:
	//
	//   If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for Type,
	// Amazon Route 53 passes the value of FullyQualifiedDomainName to the endpoint
	// in the Host header.
	//
	//   If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH for
	// Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to the
	// endpoint in the Host header.
	//
	//   If you specify another value for Port and any value except TCP for Type,
	// Amazon Route 53 passes FullyQualifiedDomainName:Port to the endpoint in the
	// Host header.
	//
	//   If you don't specify a value for FullyQualifiedDomainName, Amazon Route
	// 53 substitutes the value of IPAddress in the Host header in each of the preceding
	// cases.
	//
	//  If you don't specify IPAddress:
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 sends a DNS
	// request to the domain that you specify in FullyQualifiedDomainName at the
	// interval you specify in RequestInterval. Using an IP address that DNS returns,
	// Amazon Route 53 then checks the health of the endpoint.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-1-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	//  In this configuration, if you create a health check for which the value
	// of FullyQualifiedDomainName matches the name of the resource record sets
	// and you then associate the health check with those resource record sets,
	// health check results will be unpredictable.
	//
	//  In addition, if the value that you specify for Type is HTTP, HTTPS, HTTP_STR_MATCH,
	// or HTTPS_STR_MATCH, Amazon Route 53 passes the value of FullyQualifiedDomainName
	// in the Host header, as it does when you specify a value for IPAddress. If
	// the value of Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the HealthCheckConfig$ChildHealthChecks
	// and HealthCheckConfig$ChildHealthChecks elements.
	//
	// Note the following:
	//
	//   If you specify a number greater than the number of child health checks,
	// Amazon Route 53 always considers this health check to be unhealthy.
	//
	//   If you specify 0, Amazon Route 53 always considers this health check to
	// be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 IP address of the endpoint on which you want Amazon Route 53 to
	// perform health checks. If you don't specify a value for IPAddress, Amazon
	// Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address that DNS returns, Amazon Route 53 then checks the health
	// of the endpoint.
	//
	// If the endpoint is an Amazon EC2 instance, we recommend that you create
	// an Elastic IP address, associate it with your Amazon EC2 instance, and specify
	// the Elastic IP address for IPAddress. This ensures that the IP address of
	// your instance will never change.
	//
	// For more information, see HealthCheckConfig$FullyQualifiedDomainName.
	//
	// Contraints: Amazon Route 53 cannot check the health of endpoints for which
	// the IP address is in local, private, non-routable, or multicast ranges. For
	// more information about IP addresses for which you cannot create health checks,
	// see RFC 5735, Special Use IPv4 Addresses (https://tools.ietf.org/html/rfc5735)
	// and RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space (https://tools.ietf.org/html/rfc6598).
	//
	// When the value of Type is CALCULATED or CLOUDWATCH_METRIC, omit IPAddress.
	IPAddress *string `type:"string"`

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//    Healthy: Amazon Route 53 considers the health check to be healthy.
	//
	//    Unhealthy: Amazon Route 53 considers the health check to be unhealthy.
	//
	//    LastKnownStatus: Amazon Route 53uses the status of the health check from
	// the last time CloudWatch had sufficient data to determine the alarm state.
	// For new health checks that have no last known status, the default status
	// for the health check is healthy.
	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// Specify whether you want Amazon Route 53 to measure the latency between health
	// checkers in multiple AWS regions and your endpoint, and to display CloudWatch
	// latency graphs on the Health Checks page in the Amazon Route 53 console.
	//
	//  You can't change the value of MeasureLatency after you create a health
	// check.
	MeasureLatency *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks. Specify a value for Port only when you specify a value for IPAddress.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region from which
	// you want Amazon Route 53 health checkers to check the specified endpoint.
	Regions []*string `locationNameList:"Region" min:"1" type:"list"`

	// The number of seconds between the time that Amazon Route 53 gets a response
	// from your endpoint and the time that it sends the next health-check request.
	// Each Amazon Route 53 health checker makes requests at this interval.
	//
	//  You can't change the value of RequestInterval after you create a health
	// check.
	RequestInterval *int64 `min:"10" type:"integer"`

	// The path, if any, that you want Amazon Route 53 to request when performing
	// health checks. The path can be any value for which your endpoint will return
	// an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example,
	// the file /docs/route53-health-check.html.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy.
	//
	// Amazon Route 53 considers case when searching for SearchString in the response
	// body.
	SearchString *string `type:"string"`

	// The type of health check that you want to create, which indicates how Amazon
	// Route 53 determines whether an endpoint is healthy.
	//
	//  You can't change the value of Type after you create a health check.
	//
	//  You can create the following types of health checks:
	//
	//    HTTP: Amazon Route 53 tries to establish a TCP connection. If successful,
	// Amazon Route 53 submits an HTTP request and waits for an HTTP status code
	// of 200 or greater and less than 400.
	//
	//    HTTPS: Amazon Route 53 tries to establish a TCP connection. If successful,
	// Amazon Route 53 submits an HTTPS request and waits for an HTTP status code
	// of 200 or greater and less than 400.
	//
	//  If you specify HTTPS for the value of Type, the endpoint must support TLS
	// v1.0 or later.
	//
	//     HTTP_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	// If successful, Amazon Route 53 submits an HTTP request and searches the first
	// 5,120 bytes of the response body for the string that you specify in SearchString.
	//
	//    HTTPS_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	// If successful, Amazon Route 53 submits an HTTPS request and searches the
	// first 5,120 bytes of the response body for the string that you specify in
	// SearchString.
	//
	//    TCP: Amazon Route 53 tries to establish a TCP connection.
	//
	//    CLOUDWATCH_METRIC: The health check is associated with a CloudWatch alarm.
	// If the state of the alarm is OK, the health check is considered healthy.
	// If the state is ALARM, the health check is considered unhealthy. If CloudWatch
	// doesn't have sufficient data to determine whether the state is OK or ALARM,
	// the health check status depends on the setting for InsufficientDataHealthStatus:
	// Healthy, Unhealthy, or LastKnownStatus.
	//
	//    CALCULATED: For health checks that monitor the status of other health
	// checks, Amazon Route 53 adds up the number of health checks that Amazon Route
	// 53 health checkers consider to be healthy and compares that number with the
	// value of HealthThreshold.
	//
	//   For more information about how Amazon Route 53 determines whether an endpoint
	// is healthy, see the introduction to this topic.
	Type *string `type:"string" required:"true" enum:"HealthCheckType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health check.

func (HealthCheckConfig) GoString added in v0.6.5 

func (s HealthCheckConfig) GoString() string

GoString returns the string representation

func (HealthCheckConfig) String added in v0.6.5 

func (s HealthCheckConfig) String() string

String returns the string representation

func (*HealthCheckConfig) Validate added in v1.1.21 

func (s *HealthCheckConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type HealthCheckObservation 

type HealthCheckObservation struct {

	// The IP address of the Amazon Route 53 health checker that provided the failure
	// reason in StatusReport.
	IPAddress *string `type:"string"`

	// The region of the Amazon Route 53 health checker that provided the status
	// in StatusReport.
	Region *string `min:"1" type:"string" enum:"HealthCheckRegion"`

	// A complex type that contains the last failure reason as reported by one Amazon
	// Route 53 health checker and the time of the failed health check.
	StatusReport *StatusReport `type:"structure"`
	// contains filtered or unexported fields
}

A complex type that contains the last failure reason as reported by one Amazon Route 53 health checker.

func (HealthCheckObservation) GoString added in v0.6.5 

func (s HealthCheckObservation) GoString() string

GoString returns the string representation

func (HealthCheckObservation) String added in v0.6.5 

func (s HealthCheckObservation) String() string

String returns the string representation

type HostedZone 

type HostedZone struct {

	// The value that you specified for CallerReference when you created the hosted
	// zone.
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that includes the Comment and PrivateZone elements. If you
	// omitted the HostedZoneConfig and Comment elements from the request, the Config
	// and Comment elements don't appear in the response.
	Config *HostedZoneConfig `type:"structure"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	Id *string `type:"string" required:"true"`

	// The name of the domain. For public hosted zones, this is the name that you
	// have registered with your DNS registrar.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see CreateHostedZone.
	Name *string `type:"string" required:"true"`

	// The number of resource record sets in the hosted zone.
	ResourceRecordSetCount *int64 `type:"long"`
	// contains filtered or unexported fields
}

A complex type that contains general information about the hosted zone.

func (HostedZone) GoString added in v0.6.5 

func (s HostedZone) GoString() string

GoString returns the string representation

func (HostedZone) String added in v0.6.5 

func (s HostedZone) String() string

String returns the string representation

type HostedZoneConfig 

type HostedZoneConfig struct {

	// Any comments that you want to include about the hosted zone.
	Comment *string `type:"string"`

	// A value that indicates whether this is a private hosted zone.
	PrivateZone *bool `type:"boolean"`
	// contains filtered or unexported fields
}

A complex type that contains an optional comment about your hosted zone. If you don't want to specify a comment, omit both the HostedZoneConfig and Comment elements.

func (HostedZoneConfig) GoString added in v0.6.5 

func (s HostedZoneConfig) GoString() string

GoString returns the string representation

func (HostedZoneConfig) String added in v0.6.5 

func (s HostedZoneConfig) String() string

String returns the string representation

type ListChangeBatchesByHostedZoneInput added in v1.0.3 

type ListChangeBatchesByHostedZoneInput struct {

	// The end of the time period you want to see changes for.
	EndDate *string `location:"querystring" locationName:"endDate" deprecated:"true" type:"string" required:"true"`

	// The ID of the hosted zone that you want to see changes for.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The page marker.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The maximum number of items on a page.
	MaxItems *string `location:"querystring" locationName:"maxItems" type:"string"`

	// The start of the time period you want to see changes for.
	StartDate *string `location:"querystring" locationName:"startDate" deprecated:"true" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a ListChangeBatchesByHostedZone request.

func (ListChangeBatchesByHostedZoneInput) GoString added in v1.0.3 

func (s ListChangeBatchesByHostedZoneInput) GoString() string

GoString returns the string representation

func (ListChangeBatchesByHostedZoneInput) String added in v1.0.3 

func (s ListChangeBatchesByHostedZoneInput) String() string

String returns the string representation

func (*ListChangeBatchesByHostedZoneInput) Validate added in v1.1.21 

func (s *ListChangeBatchesByHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListChangeBatchesByHostedZoneOutput added in v1.0.3 

type ListChangeBatchesByHostedZoneOutput struct {

	// The change batches within the given hosted zone and time period.
	ChangeBatchRecords []*ChangeBatchRecord `locationNameList:"ChangeBatchRecord" min:"1" deprecated:"true" type:"list" required:"true"`

	// A flag that indicates if there are more change batches to list.
	IsTruncated *bool `type:"boolean"`

	// For the second and subsequent calls to ListHostedZones, Marker is the value
	// that you specified for the marker parameter in the request that produced
	// the current response.
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZones
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// The next page marker.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request.

func (ListChangeBatchesByHostedZoneOutput) GoString added in v1.0.3 

func (s ListChangeBatchesByHostedZoneOutput) GoString() string

GoString returns the string representation

func (ListChangeBatchesByHostedZoneOutput) String added in v1.0.3 

func (s ListChangeBatchesByHostedZoneOutput) String() string

String returns the string representation

type ListChangeBatchesByRRSetInput added in v1.0.3 

type ListChangeBatchesByRRSetInput struct {

	// The end of the time period you want to see changes for.
	EndDate *string `location:"querystring" locationName:"endDate" deprecated:"true" type:"string" required:"true"`

	// The ID of the hosted zone that you want to see changes for.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The page marker.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The maximum number of items on a page.
	MaxItems *string `location:"querystring" locationName:"maxItems" type:"string"`

	// The name of the RRSet that you want to see changes for.
	Name *string `location:"querystring" locationName:"rrSet_name" type:"string" required:"true"`

	// The identifier of the RRSet that you want to see changes for.
	SetIdentifier *string `location:"querystring" locationName:"identifier" min:"1" type:"string"`

	// The start of the time period you want to see changes for.
	StartDate *string `location:"querystring" locationName:"startDate" deprecated:"true" type:"string" required:"true"`

	// The type of the RRSet that you want to see changes for.
	Type *string `location:"querystring" locationName:"type" type:"string" required:"true" enum:"RRType"`
	// contains filtered or unexported fields
}

The input for a ListChangeBatchesByRRSet request.

func (ListChangeBatchesByRRSetInput) GoString added in v1.0.3 

func (s ListChangeBatchesByRRSetInput) GoString() string

GoString returns the string representation

func (ListChangeBatchesByRRSetInput) String added in v1.0.3 

func (s ListChangeBatchesByRRSetInput) String() string

String returns the string representation

func (*ListChangeBatchesByRRSetInput) Validate added in v1.1.21 

func (s *ListChangeBatchesByRRSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListChangeBatchesByRRSetOutput added in v1.0.3 

type ListChangeBatchesByRRSetOutput struct {

	// The change batches within the given hosted zone and time period.
	ChangeBatchRecords []*ChangeBatchRecord `locationNameList:"ChangeBatchRecord" min:"1" deprecated:"true" type:"list" required:"true"`

	// A flag that indicates if there are more change batches to list.
	IsTruncated *bool `type:"boolean"`

	// The page marker.
	Marker *string `type:"string" required:"true"`

	// The maximum number of items on a page.
	MaxItems *string `type:"string" required:"true"`

	// The next page marker.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

The input for a ListChangeBatchesByRRSet request.

func (ListChangeBatchesByRRSetOutput) GoString added in v1.0.3 

func (s ListChangeBatchesByRRSetOutput) GoString() string

GoString returns the string representation

func (ListChangeBatchesByRRSetOutput) String added in v1.0.3 

func (s ListChangeBatchesByRRSetOutput) String() string

String returns the string representation

type ListGeoLocationsInput 

type ListGeoLocationsInput struct {

	// (Optional) The maximum number of geolocations to be included in the response
	// body for this request. If more than MaxItems geolocations remain to be listed,
	// then the value of the IsTruncated element in the response is true.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The code for the continent with which you want to start listing locations
	// that Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextContinentCode
	// from the previous response has a value, enter that value in StartContinentCode
	// to return the next page of results.
	//
	// Include StartContinentCode only if you want to list continents. Don't include
	// StartContinentCode when you're listing countries or countries with their
	// subdivisions.
	StartContinentCode *string `location:"querystring" locationName:"startcontinentcode" min:"2" type:"string"`

	// The code for the country with which you want to start listing locations that
	// Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextCountryCode
	// from the previous response has a value, enter that value in StartCountryCode
	// to return the next page of results.
	//
	// Amazon Route 53 uses the two-letter country codes that are specified in
	// ISO standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	StartCountryCode *string `location:"querystring" locationName:"startcountrycode" min:"1" type:"string"`

	// The code for the subdivision (for example, state or province) with which
	// you want to start listing locations that Amazon Route 53 supports for geolocation.
	// If Amazon Route 53 has already returned a page or more of results, if IsTruncated
	// is true, and if NextSubdivisionCode from the previous response has a value,
	// enter that value in StartSubdivisionCode to return the next page of results.
	//
	// To list subdivisions of a country, you must include both StartCountryCode
	// and StartSubdivisionCode.
	StartSubdivisionCode *string `location:"querystring" locationName:"startsubdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

To get a list of geographic locations that Amazon Route 53 supports for geolocation, send a GET request to the /Amazon Route 53 API version/geolocations resource. The response to this request includes a GeoLocationDetails element for each location that Amazon Route 53 supports.

Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.

func (ListGeoLocationsInput) GoString added in v0.6.5 

func (s ListGeoLocationsInput) GoString() string

GoString returns the string representation

func (ListGeoLocationsInput) String added in v0.6.5 

func (s ListGeoLocationsInput) String() string

String returns the string representation

func (*ListGeoLocationsInput) Validate added in v1.1.21 

func (s *ListGeoLocationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListGeoLocationsOutput 

type ListGeoLocationsOutput struct {

	// A complex type that contains one GeoLocationDetails element for each location
	// that Amazon Route 53 supports for geolocation.
	GeoLocationDetailsList []*GeoLocationDetails `locationNameList:"GeoLocationDetails" type:"list" required:"true"`

	// A value that indicates whether more locations remain to be listed after the
	// last location in this response. If so, the value of IsTruncated is true.
	// To get more values, submit another request and include the values of NextContinentCode,
	// NextCountryCode, and NextSubdivisionCode in the StartContinentCode, StartCountryCode,
	// and StartSubdivisionCode, as applicable.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for MaxItems in the request.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextContinentCode in the StartContinentCode
	// parameter in another GET ListGeoLocations request.
	NextContinentCode *string `min:"2" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextCountryCode in the StartCountryCode parameter
	// in another GET ListGeoLocations request.
	NextCountryCode *string `min:"1" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextSubdivisionCode in the StartSubdivisionCode
	// parameter in another GET ListGeoLocations request.
	NextSubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request.

func (ListGeoLocationsOutput) GoString added in v0.6.5 

func (s ListGeoLocationsOutput) GoString() string

GoString returns the string representation

func (ListGeoLocationsOutput) String added in v0.6.5 

func (s ListGeoLocationsOutput) String() string

String returns the string representation

type ListHealthChecksInput 

type ListHealthChecksInput struct {

	// If the response to a ListHealthChecks is more than one page, marker is the
	// health check ID for the first health check on the next page of results. For
	// more information, see ListHealthChecksResponse$MaxItems.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The maximum number of HealthCheck elements you want ListHealthChecks to return
	// on each page of the response body. If the AWS account includes more HealthCheck
	// elements than the value of maxitems, the response is broken into pages. Each
	// page contains the number of HealthCheck elements specified by maxitems.
	//
	// For example, suppose you specify 10 for maxitems and the current AWS account
	// has 51 health checks. In the response, ListHealthChecks sets ListHealthChecksResponse$IsTruncated
	// to true and includes the ListHealthChecksResponse$NextMarker element. To
	// access the second and subsequent pages, you resend the GET ListHealthChecks
	// request, add the ListHealthChecksResponse$Marker parameter to the request,
	// and specify the value of the ListHealthChecksResponse$NextMarker element
	// from the previous response. On the last (sixth) page of the response, which
	// contains only one HealthCheck element:
	//
	//   The value of ListHealthChecksResponse$IsTruncated is false.
	//
	//    ListHealthChecksResponse$NextMarker is omitted.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your health checks, send a GET request to the /2013-04-01/healthcheck resource. The response to this request includes a HealthChecks element with zero or more HealthCheck child elements. By default, the list of health checks is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the health check that the list begins with. 

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to

a value greater than 100, Amazon Route 53 returns only the first 100.

func (ListHealthChecksInput) GoString added in v0.6.5 

func (s ListHealthChecksInput) GoString() string

GoString returns the string representation

func (ListHealthChecksInput) String added in v0.6.5 

func (s ListHealthChecksInput) String() string

String returns the string representation

type ListHealthChecksOutput 

type ListHealthChecksOutput struct {

	// A complex type that contains one HealthCheck element for each health check
	// that is associated with the current AWS account.
	HealthChecks []*HealthCheck `locationNameList:"HealthCheck" type:"list" required:"true"`

	// A flag that indicates whether there are more health checks to be listed.
	// If the response was truncated, you can get the next group of maxitems health
	// checks by calling ListHealthChecks again and specifying the value of the
	// NextMarker element in the marker parameter.
	//
	// Valid Values: true | false
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHealthChecks, Marker is the value
	// that you specified for the marker parameter in the previous request.
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHealthChecks
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first health
	// check in the next group of maxitems health checks. Call ListHealthChecks
	// again and specify the value of NextMarker in the marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a ListHealthChecks request.

func (ListHealthChecksOutput) GoString added in v0.6.5 

func (s ListHealthChecksOutput) GoString() string

GoString returns the string representation

func (ListHealthChecksOutput) String added in v0.6.5 

func (s ListHealthChecksOutput) String() string

String returns the string representation

type ListHostedZonesByNameInput 

type ListHostedZonesByNameInput struct {

	// (Optional) For your first request to ListHostedZonesByName, include the dnsname
	// parameter only if you want to specify the name of the first hosted zone in
	// the response. If you don't include the dnsname parameter, Amazon Route 53
	// returns all of the hosted zones that were created by the current AWS account,
	// in ASCII order. For subsequent requests, include both dnsname and hostedzoneid
	// parameters. For dnsname, specify the value of NextDNSName from the previous
	// response.
	DNSName *string `location:"querystring" locationName:"dnsname" type:"string"`

	// (Optional) For your first request to ListHostedZonesByName, do not include
	// the hostedzoneid parameter.
	//
	// If you have more hosted zones than the value of maxitems, ListHostedZonesByName
	// returns only the first maxitems hosted zones. To get the next group of maxitems
	// hosted zones, submit another request to ListHostedZonesByName and include
	// both dnsname and hostedzoneid parameters. For the value of hostedzoneid,
	// specify the value of the NextHostedZoneId element from the previous response.
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of hosted zones to be included in the response body for
	// this request. If you have more than maxitems hosted zones, then the value
	// of the IsTruncated element in the response is true, and the values of NextDNSName
	// and NextHostedZoneId specify the first hosted zone in the next group of maxitems
	// hosted zones.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your public and private hosted zones in ASCII order by domain name, send a GET request to the /Amazon Route 53 API version/hostedzonesbyname resource. The response to this request includes a HostedZone child element for each hosted zone that was created by the current AWS account. ListHostedZonesByName sorts hosted zones by name with the labels reversed, for example: 

com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name. ListHostedZonesByName alphabetizes it as: com.ex\344mple. The labels are reversed, and it's alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the Amazon Route 53 Developer Guide.

Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, you can use the MaxItems parameter to list them in groups of up to 100. The response includes values that help you navigate from one group of MaxItems hosted zones to the next: 

The DNSName and HostedZoneId elements in the response contain the values,

if any, that you specified for the dnsname and hostedzoneid parameters in the request that produced the current response. 

The MaxItems element in the response contains the value, if any, that

you specified for the maxitems parameter in the request that produced the current response. 

If the value of IsTruncated in the response is true, there are more hosted

zones associated with the current Amazon Route 53 account.

If IsTruncated is false, this response includes the last hosted zone that is associated with the current account. The NextDNSName element and NextHostedZoneId elements are omitted from the response. 

The NextDNSName and NextHostedZoneId elements in the response contain

the domain name and the hosted zone ID of the next hosted zone that is associated with the current AWS account. If you want to list more hosted zones, make another call to ListHostedZonesByName, and specify the value of NextDNSName and NextHostedZoneId in the dnsname and hostedzoneid parameters, respectively.

func (ListHostedZonesByNameInput) GoString added in v0.6.5 

func (s ListHostedZonesByNameInput) GoString() string

GoString returns the string representation

func (ListHostedZonesByNameInput) String added in v0.6.5 

func (s ListHostedZonesByNameInput) String() string

String returns the string representation

type ListHostedZonesByNameOutput 

type ListHostedZonesByNameOutput struct {

	// For the second and subsequent calls to ListHostedZonesByName, DNSName is
	// the value that you specified for the dnsname parameter in the request that
	// produced the current response.
	DNSName *string `type:"string"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	HostedZoneId *string `type:"string"`

	// A complex type that contains general information about the hosted zone.
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag that indicates whether there are more hosted zones to be listed. If
	// the response was truncated, you can get the next group of maxitems hosted
	// zones by calling ListHostedZonesByName again and specifying the values of
	// NextDNSName and NextHostedZoneId elements in the dnsname and hostedzoneid
	// parameters.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZonesByName
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextDNSName is the name of the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextDNSName *string `type:"string"`

	// If IsTruncated is true, the value of NextHostedZoneId identifies the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextHostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListHostedZonesByNameOutput) GoString added in v0.6.5 

func (s ListHostedZonesByNameOutput) GoString() string

GoString returns the string representation

func (ListHostedZonesByNameOutput) String added in v0.6.5 

func (s ListHostedZonesByNameOutput) String() string

String returns the string representation

type ListHostedZonesInput 

type ListHostedZonesInput struct {
	DelegationSetId *string `location:"querystring" locationName:"delegationsetid" type:"string"`

	// (Optional) If you have more hosted zones than the value of maxitems, ListHostedZones
	// returns only the first maxitems hosted zones. To get the next group of maxitems
	// hosted zones, submit another request to ListHostedZones. For the value of
	// marker, specify the value of the NextMarker element that was returned in
	// the previous response.
	//
	// Hosted zones are listed in the order in which they were created.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// (Optional) The maximum number of hosted zones to be included in the response
	// body for this request. If you have more than maxitems hosted zones, the value
	// of the IsTruncated element in the response is true, and the value of the
	// NextMarker element is the hosted zone ID of the first hosted zone in the
	// next group of maxitems hosted zones.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your public and private hosted zones, send a GET request to the /2013-04-01/hostedzone resource. The response to this request includes a HostedZone child element for each hosted zone that was created by the current AWS account.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100. The response includes four values that help you navigate from one group of maxitems hosted zones to the next: 

MaxItems is the value that you specified for the maxitems parameter in

the request that produced the current response. 

If the value of IsTruncated in the response is true, there are more hosted

zones associated with the current AWS account.

If IsTruncated is false, this response includes the last hosted zone that is associated with the current account. 

NextMarker is the hosted zone ID of the next hosted zone that is associated

with the current AWS account. If you want to list more hosted zones, make another call to ListHostedZones, and specify the value of the NextMarker element in the marker parameter.

If IsTruncated is false, the NextMarker element is omitted from the response. 

If you're making the second or subsequent call to ListHostedZones, the

Marker element matches the value that you specified in the marker parameter in the previous request.

func (ListHostedZonesInput) GoString added in v0.6.5 

func (s ListHostedZonesInput) GoString() string

GoString returns the string representation

func (ListHostedZonesInput) String added in v0.6.5 

func (s ListHostedZonesInput) String() string

String returns the string representation

type ListHostedZonesOutput 

type ListHostedZonesOutput struct {

	// A complex type that contains general information about the hosted zone.
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag indicating whether there are more hosted zones to be listed. If the
	// response was truncated, you can get the next group of maxitems hosted zones
	// by calling ListHostedZones again and specifying the value of the NextMarker
	// element in the marker parameter.
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHostedZones, Marker is the value
	// that you specified for the marker parameter in the request that produced
	// the current response.
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZones
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first hosted
	// zone in the next group of maxitems hosted zones. Call ListHostedZones again
	// and specify the value of NextMarker in the marker parameter.
	//
	// This element is present only if IsTruncated is true.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

func (ListHostedZonesOutput) GoString added in v0.6.5 

func (s ListHostedZonesOutput) GoString() string

GoString returns the string representation

func (ListHostedZonesOutput) String added in v0.6.5 

func (s ListHostedZonesOutput) String() string

String returns the string representation

type ListResourceRecordSetsInput 

type ListResourceRecordSetsInput struct {

	// The ID of the hosted zone that contains the resource record sets that you
	// want to get.
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// (Optional) The maximum number of resource records sets to include in the
	// response body for this request. If the response includes more than maxitems
	// resource record sets, the value of the IsTruncated element in the response
	// is true, and the values of the NextRecordName and NextRecordType elements
	// in the response identify the first resource record set in the next group
	// of maxitems resource record sets.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// Weighted resource record sets only: If results were truncated for a given
	// DNS name and type, specify the value of NextRecordIdentifier from the previous
	// response to get the next resource record set that has the current DNS name
	// and type.
	StartRecordIdentifier *string `location:"querystring" locationName:"identifier" min:"1" type:"string"`

	// The first name in the lexicographic ordering of domain names that you want
	// the ListResourceRecordSets request to list.
	StartRecordName *string `location:"querystring" locationName:"name" type:"string"`

	// The type of resource record set to begin the record listing from.
	//
	// Valid values for basic resource record sets: A | AAAA | CNAME | MX | NAPTR
	// | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geo, and failover resource record sets: A
	// | AAAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT
	//
	// Values for alias resource record sets:
	//
	//    CloudFront distribution: A
	//
	//    Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//    ELB load balancer: A | AAAA
	//
	//    Amazon S3 bucket: A
	//
	//   Constraint: Specifying type without specifying name returns an InvalidInput
	// error.
	StartRecordType *string `location:"querystring" locationName:"type" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

The input for a ListResourceRecordSets request.

func (ListResourceRecordSetsInput) GoString added in v0.6.5 

func (s ListResourceRecordSetsInput) GoString() string

GoString returns the string representation

func (ListResourceRecordSetsInput) String added in v0.6.5 

func (s ListResourceRecordSetsInput) String() string

String returns the string representation

func (*ListResourceRecordSetsInput) Validate added in v1.1.21 

func (s *ListResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListResourceRecordSetsOutput 

type ListResourceRecordSetsOutput struct {

	// A flag that indicates whether more resource record sets remain to be listed.
	// If your results were truncated, you can make a follow-up pagination request
	// by using the NextRecordName element.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The maximum number of records you requested.
	MaxItems *string `type:"string" required:"true"`

	// Weighted, latency, geolocation, and failover resource record sets only: If
	// results were truncated for a given DNS name and type, the value of SetIdentifier
	// for the next resource record set that has the current DNS name and type.
	NextRecordIdentifier *string `min:"1" type:"string"`

	// If the results were truncated, the name of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordName *string `type:"string"`

	// If the results were truncated, the type of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordType *string `type:"string" enum:"RRType"`

	// Information about multiple resource record sets.
	ResourceRecordSets []*ResourceRecordSet `locationNameList:"ResourceRecordSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains list information for the resource record set.

func (ListResourceRecordSetsOutput) GoString added in v0.6.5 

func (s ListResourceRecordSetsOutput) GoString() string

GoString returns the string representation

func (ListResourceRecordSetsOutput) String added in v0.6.5 

func (s ListResourceRecordSetsOutput) String() string

String returns the string representation

type ListReusableDelegationSetsInput 

type ListReusableDelegationSetsInput struct {

	// If you're making the second or subsequent call to ListReusableDelegationSets,
	// the Marker element matches the value that you specified in the marker parameter
	// in the previous request.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The value that you specified for the maxitems parameter in the request that
	// produced the current response.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

To retrieve a list of your reusable delegation sets, send a GET request to the /2013-04-01/delegationset resource. The response to this request includes a DelegationSets element with zero or more DelegationSet child elements. By default, the list of reusable delegation sets is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the delegation set that the list begins with. 

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to

a value greater than 100, Amazon Route 53 returns only the first 100.

func (ListReusableDelegationSetsInput) GoString added in v0.6.5 

func (s ListReusableDelegationSetsInput) GoString() string

GoString returns the string representation

func (ListReusableDelegationSetsInput) String added in v0.6.5 

func (s ListReusableDelegationSetsInput) String() string

String returns the string representation

type ListReusableDelegationSetsOutput 

type ListReusableDelegationSetsOutput struct {

	// A complex type that contains one DelegationSet element for each reusable
	// delegation set that was created by the current AWS account.
	DelegationSets []*DelegationSet `locationNameList:"DelegationSet" type:"list" required:"true"`

	// A flag that indicates whether there are more reusable delegation sets to
	// be listed. If the response is truncated, you can get the next group of maxitems
	// reusable delegation sets by calling ListReusableDelegationSets again and
	// specifying the value of the NextMarker element in the marker parameter.
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListReusableDelegationSets, Marker
	// is the value that you specified for the marker parameter in the request that
	// produced the current response.
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListReusableDelegationSets
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first reusable
	// delegation set in the next group of maxitems reusable delegation sets. Call
	// ListReusableDelegationSets again and specify the value of NextMarker in the
	// marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about the reusable delegation sets that are associated with the current AWS account.

func (ListReusableDelegationSetsOutput) GoString added in v0.6.5 

func (s ListReusableDelegationSetsOutput) GoString() string

GoString returns the string representation

func (ListReusableDelegationSetsOutput) String added in v0.6.5 

func (s ListReusableDelegationSetsOutput) String() string

String returns the string representation

type ListTagsForResourceInput 

type ListTagsForResourceInput struct {

	// The ID of the resource for which you want to retrieve tags.
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//   The resource type for health checks is healthcheck.
	//
	//   The resource type for hosted zones is hostedzone.
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type containing information about a request for a list of the tags that are associated with an individual resource.

func (ListTagsForResourceInput) GoString added in v0.6.5 

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (ListTagsForResourceInput) String added in v0.6.5 

func (s ListTagsForResourceInput) String() string

String returns the string representation

func (*ListTagsForResourceInput) Validate added in v1.1.21 

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourceOutput 

type ListTagsForResourceOutput struct {

	// A ResourceTagSet containing tags associated with the specified resource.
	ResourceTagSet *ResourceTagSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

func (ListTagsForResourceOutput) GoString added in v0.6.5 

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (ListTagsForResourceOutput) String added in v0.6.5 

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type ListTagsForResourcesInput 

type ListTagsForResourcesInput struct {

	// A complex type that contains the ResourceId element for each resource for
	// which you want to get a list of tags.
	ResourceIds []*string `locationNameList:"ResourceId" min:"1" type:"list" required:"true"`

	// The type of the resources.
	//
	//   The resource type for health checks is healthcheck.
	//
	//   The resource type for hosted zones is hostedzone.
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

func (ListTagsForResourcesInput) GoString added in v0.6.5 

func (s ListTagsForResourcesInput) GoString() string

GoString returns the string representation

func (ListTagsForResourcesInput) String added in v0.6.5 

func (s ListTagsForResourcesInput) String() string

String returns the string representation

func (*ListTagsForResourcesInput) Validate added in v1.1.21 

func (s *ListTagsForResourcesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourcesOutput 

type ListTagsForResourcesOutput struct {

	// A list of ResourceTagSets containing tags associated with the specified resources.
	ResourceTagSets []*ResourceTagSet `locationNameList:"ResourceTagSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing tags for the specified resources.

func (ListTagsForResourcesOutput) GoString added in v0.6.5 

func (s ListTagsForResourcesOutput) GoString() string

GoString returns the string representation

func (ListTagsForResourcesOutput) String added in v0.6.5 

func (s ListTagsForResourcesOutput) String() string

String returns the string representation

type ListTrafficPoliciesInput added in v1.0.3 

type ListTrafficPoliciesInput struct {

	// (Optional) The maximum number of traffic policies to be included in the response
	// body for this request. If you have more than MaxItems traffic policies, the
	// value of the IsTruncated element in the response is true, and the value of
	// the TrafficPolicyIdMarker element is the ID of the first traffic policy in
	// the next group of MaxItems traffic policies.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// (Conditional) For your first request to ListTrafficPolicies, do not include
	// the TrafficPolicyIdMarker parameter.
	//
	// If you have more traffic policies than the value of MaxItems, ListTrafficPolicies
	// returns only the first MaxItems traffic policies. To get the next group of
	// MaxItems policies, submit another request to ListTrafficPolicies. For the
	// value of TrafficPolicyIdMarker, specify the value of the TrafficPolicyIdMarker
	// element that was returned in the previous response.
	//
	// Policies are listed in the order in which they were created.
	TrafficPolicyIdMarker *string `location:"querystring" locationName:"trafficpolicyid" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list the traffic policies that are associated with the current AWS account.

func (ListTrafficPoliciesInput) GoString added in v1.0.3 

func (s ListTrafficPoliciesInput) GoString() string

GoString returns the string representation

func (ListTrafficPoliciesInput) String added in v1.0.3 

func (s ListTrafficPoliciesInput) String() string

String returns the string representation

type ListTrafficPoliciesOutput added in v1.0.3 

type ListTrafficPoliciesOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of MaxItems traffic
	// policies by calling ListTrafficPolicies again and specifying the value of
	// the TrafficPolicyIdMarker element in the TrafficPolicyIdMarker request parameter.
	//
	// Valid Values: true | false
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicies
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If the value of IsTruncated is true, TrafficPolicyIdMarker is the ID of the
	// first traffic policy in the next group of MaxItems traffic policies.
	TrafficPolicyIdMarker *string `type:"string" required:"true"`

	// A list that contains one TrafficPolicySummary element for each traffic policy
	// that was created by the current AWS account.
	TrafficPolicySummaries []*TrafficPolicySummary `locationNameList:"TrafficPolicySummary" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPoliciesOutput) GoString added in v1.0.3 

func (s ListTrafficPoliciesOutput) GoString() string

GoString returns the string representation

func (ListTrafficPoliciesOutput) String added in v1.0.3 

func (s ListTrafficPoliciesOutput) String() string

String returns the string representation

type ListTrafficPolicyInstancesByHostedZoneInput added in v1.0.3 

type ListTrafficPolicyInstancesByHostedZoneInput struct {

	// The ID of the hosted zone for which you want to list traffic policy instances.
	HostedZoneId *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByHostedZone, omit this
	// value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByHostedZone, omit this
	// value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A request for the traffic policy instances that you created in a specified hosted zone.

func (ListTrafficPolicyInstancesByHostedZoneInput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesByHostedZoneInput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesByHostedZoneInput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesByHostedZoneInput) String() string

String returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneInput) Validate added in v1.1.21 

func (s *ListTrafficPolicyInstancesByHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByHostedZoneOutput added in v1.0.3 

type ListTrafficPolicyInstancesByHostedZoneOutput struct {

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstancesByHostedZone
	// again and specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstancesByHostedZone
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesByHostedZoneOutput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesByHostedZoneOutput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesByHostedZoneOutput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesByHostedZoneOutput) String() string

String returns the string representation

type ListTrafficPolicyInstancesByPolicyInput added in v1.0.3 

type ListTrafficPolicyInstancesByPolicyInput struct {

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, HostedZoneIdMarker
	// is the ID of the hosted zone for the first traffic policy instance in the
	// next group of MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The ID of the traffic policy for which you want to list traffic policy instances.
	TrafficPolicyId *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	//
	// If the value of IsTruncated in the previous response was false, omit this
	// value.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstancesByPolicy, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get for this hosted zone.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`

	// The version of the traffic policy for which you want to list traffic policy
	// instances. The version must be associated with the traffic policy that is
	// specified by TrafficPolicyId.
	TrafficPolicyVersion *int64 `location:"querystring" locationName:"version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policy instances.

func (ListTrafficPolicyInstancesByPolicyInput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesByPolicyInput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesByPolicyInput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesByPolicyInput) String() string

String returns the string representation

func (*ListTrafficPolicyInstancesByPolicyInput) Validate added in v1.1.21 

func (s *ListTrafficPolicyInstancesByPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByPolicyOutput added in v1.0.3 

type ListTrafficPolicyInstancesByPolicyOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstancesByPolicy again
	// and specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstancesByPolicy
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesByPolicyOutput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesByPolicyOutput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesByPolicyOutput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesByPolicyOutput) String() string

String returns the string representation

type ListTrafficPolicyInstancesInput added in v1.0.3 

type ListTrafficPolicyInstancesInput struct {

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, you have
	// more traffic policy instances. To get the next group of MaxItems traffic
	// policy instances, submit another ListTrafficPolicyInstances request. For
	// the value of HostedZoneIdMarker, specify the value of HostedZoneIdMarker
	// from the previous response, which is the hosted zone ID of the first traffic
	// policy instance in the next group of MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceNameMarker
	// is the name of the first traffic policy instance in the next group of MaxItems
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// For the first request to ListTrafficPolicyInstances, omit this value.
	//
	// If the value of IsTruncated in the previous response was true, TrafficPolicyInstanceTypeMarker
	// is the DNS type of the first traffic policy instance in the next group of
	// MaxItems traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policy instances.

func (ListTrafficPolicyInstancesInput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesInput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesInput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesInput) String() string

String returns the string representation

type ListTrafficPolicyInstancesOutput added in v1.0.3 

type ListTrafficPolicyInstancesOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of MaxItems
	// traffic policy instances by calling ListTrafficPolicyInstances again and
	// specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstances
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyInstancesOutput) GoString added in v1.0.3 

func (s ListTrafficPolicyInstancesOutput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyInstancesOutput) String added in v1.0.3 

func (s ListTrafficPolicyInstancesOutput) String() string

String returns the string representation

type ListTrafficPolicyVersionsInput added in v1.0.3 

type ListTrafficPolicyVersionsInput struct {

	// Specify the value of Id of the traffic policy for which you want to list
	// all versions.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The maximum number of traffic policy versions that you want Amazon Route
	// 53 to include in the response body for this request. If the specified traffic
	// policy has more than MaxItems versions, the value of the IsTruncated element
	// in the response is true, and the value of the TrafficPolicyVersionMarker
	// element is the ID of the first version in the next group of MaxItems traffic
	// policy versions.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For your first request to ListTrafficPolicyVersions, do not include the TrafficPolicyVersionMarker
	// parameter.
	//
	// If you have more traffic policy versions than the value of MaxItems, ListTrafficPolicyVersions
	// returns only the first group of MaxItems versions. To get the next group
	// of MaxItems traffic policy versions, submit another request to ListTrafficPolicyVersions.
	// For the value of TrafficPolicyVersionMarker, specify the value of the TrafficPolicyVersionMarker
	// element that was returned in the previous response.
	//
	// Traffic policy versions are listed in sequential order.
	TrafficPolicyVersionMarker *string `location:"querystring" locationName:"trafficpolicyversion" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policies.

func (ListTrafficPolicyVersionsInput) GoString added in v1.0.3 

func (s ListTrafficPolicyVersionsInput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyVersionsInput) String added in v1.0.3 

func (s ListTrafficPolicyVersionsInput) String() string

String returns the string representation

func (*ListTrafficPolicyVersionsInput) Validate added in v1.1.21 

func (s *ListTrafficPolicyVersionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyVersionsOutput added in v1.0.3 

type ListTrafficPolicyVersionsOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of maxitems traffic
	// policies by calling ListTrafficPolicyVersions again and specifying the value
	// of the NextMarker element in the marker parameter.
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListTrafficPolicyVersions
	// that produced the current response.
	MaxItems *string `type:"string" required:"true"`

	// A list that contains one TrafficPolicy element for each traffic policy version
	// that is associated with the specified traffic policy.
	TrafficPolicies []*TrafficPolicy `locationNameList:"TrafficPolicy" type:"list" required:"true"`

	// If IsTruncated is true, the value of TrafficPolicyVersionMarker identifies
	// the first traffic policy in the next group of MaxItems traffic policies.
	// Call ListTrafficPolicyVersions again and specify the value of TrafficPolicyVersionMarker
	// in the TrafficPolicyVersionMarker request parameter.
	//
	// This element is present only if IsTruncated is true.
	TrafficPolicyVersionMarker *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request.

func (ListTrafficPolicyVersionsOutput) GoString added in v1.0.3 

func (s ListTrafficPolicyVersionsOutput) GoString() string

GoString returns the string representation

func (ListTrafficPolicyVersionsOutput) String added in v1.0.3 

func (s ListTrafficPolicyVersionsOutput) String() string

String returns the string representation

type ResourceRecord 

type ResourceRecord struct {

	// The current or new DNS record value, not to exceed 4,000 characters. In the
	// case of a DELETE action, if the current value does not match the actual value,
	// an error is returned. For descriptions about how to format Value for different
	// record types, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can specify more than one value for all record types except CNAME and
	// SOA.
	//
	//  If you are creating an alias resource record set, omit Value.
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information specific to the resource record. 

If you are creating an alias resource record set, omit ResourceRecord.

func (ResourceRecord) GoString added in v0.6.5 

func (s ResourceRecord) GoString() string

GoString returns the string representation

func (ResourceRecord) String added in v0.6.5 

func (s ResourceRecord) String() string

String returns the string representation

func (*ResourceRecord) Validate added in v1.1.21 

func (s *ResourceRecord) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceRecordSet 

type ResourceRecordSet struct {

	// Alias resource record sets only: Information about the CloudFront distribution,
	// Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or Amazon
	// Route 53 resource record set to which you are redirecting queries. The Elastic
	// Beanstalk environment must have a regionalized subdomain.
	//
	// If you're creating resource records sets for a private hosted zone, note
	// the following:
	//
	//   You can't create alias resource record sets for CloudFront distributions
	// in a private hosted zone.
	//
	//   Creating geolocation alias resource record sets or latency alias resource
	// record sets in a private hosted zone is unsupported.
	//
	//   For information about creating failover resource record sets in a private
	// hosted zone, see Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	// in the Amazon Route 53 Developer Guide.
	AliasTarget *AliasTarget `type:"structure"`

	// Failover resource record sets only: To configure failover, you add the Failover
	// element to two resource record sets. For one resource record set, you specify
	// PRIMARY as the value for Failover; for the other resource record set, you
	// specify SECONDARY. In addition, you include the HealthCheckId element and
	// specify the health check that you want Amazon Route 53 to perform for each
	// resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have
	// included the HealthCheckId element in both resource record sets:
	//
	//   When the primary resource record set is healthy, Amazon Route 53 responds
	// to DNS queries with the applicable value from the primary resource record
	// set regardless of the health of the secondary resource record set.
	//
	//   When the primary resource record set is unhealthy and the secondary resource
	// record set is healthy, Amazon Route 53 responds to DNS queries with the applicable
	// value from the secondary resource record set.
	//
	//   When the secondary resource record set is unhealthy, Amazon Route 53 responds
	// to DNS queries with the applicable value from the primary resource record
	// set regardless of the health of the primary resource record set.
	//
	//   If you omit the HealthCheckId element for the secondary resource record
	// set, and if the primary resource record set is unhealthy, Amazon Route 53
	// always responds to DNS queries with the applicable value from the secondary
	// resource record set. This is true regardless of the health of the associated
	// endpoint.
	//
	//   You cannot create non-failover resource record sets that have the same
	// values for the Name and Type elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the EvaluateTargetHealth
	// element and set the value to true.
	//
	// For more information about configuring failover for Amazon Route 53, see
	// the following topics in the Amazon Route 53 Developer Guide:
	//
	//    Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//
	//   Valid values: PRIMARY | SECONDARY
	Failover *string `type:"string" enum:"ResourceRecordSetFailover"`

	// Geo location resource record sets only: A complex type that lets you control
	// how Amazon Route 53 responds to DNS queries based on the geographic origin
	// of the query. For example, if you want all queries from Africa to be routed
	// to a web server with an IP address of 192.0.2.111, create a resource record
	// set with a Type of A and a ContinentCode of AF.
	//
	//  Creating geolocation and geolocation alias resource record sets in private
	// hosted zones is not supported.
	//
	//  If you create separate resource record sets for overlapping geographic
	// regions (for example, one resource record set for a continent and one for
	// a country on the same continent), priority goes to the smallest geographic
	// region. This allows you to route most queries for a continent to one resource
	// and to route queries for a country on that continent to a different resource.
	//
	// You cannot create two geolocation resource record sets that specify the
	// same geographic location.
	//
	// The value * in the CountryCode element matches all geographic locations
	// that aren't specified in other geolocation resource record sets that have
	// the same values for the Name and Type elements.
	//
	//  Geolocation works by mapping IP addresses to locations. However, some IP
	// addresses aren't mapped to geographic locations, so even if you create geolocation
	// resource record sets that cover all seven continents, Amazon Route 53 will
	// receive some DNS queries from locations that it can't identify. We recommend
	// that you create a resource record set for which the value of CountryCode
	// is *, which handles both queries that come from locations for which you haven't
	// created geolocation resource record sets and queries from IP addresses that
	// aren't mapped to a location. If you don't create a * resource record set,
	// Amazon Route 53 returns a "no answer" response for queries from those locations.
	//
	//  You cannot create non-geolocation resource record sets that have the same
	// values for the Name and Type elements as geolocation resource record sets.
	GeoLocation *GeoLocation `type:"structure"`

	// If you want Amazon Route 53 to return this resource record set in response
	// to a DNS query only when a health check is passing, include the HealthCheckId
	// element and specify the ID of the applicable health check.
	//
	// Amazon Route 53 determines whether a resource record set is healthy based
	// on one of the following:
	//
	//   By periodically sending a request to the endpoint that is specified in
	// the health check
	//
	//   By aggregating the status of a specified group of health checks (calculated
	// health checks)
	//
	//   By determining the current state of a CloudWatch alarm (CloudWatch metric
	// health checks)
	//
	//   For information about how Amazon Route 53 determines whether a health
	// check is healthy, see CreateHealthCheck.
	//
	// The HealthCheckId element is only useful when Amazon Route 53 is choosing
	// between two or more resource record sets to respond to a DNS query, and you
	// want Amazon Route 53 to base the choice in part on the status of a health
	// check. Configuring health checks only makes sense in the following configurations:
	//
	//   You're checking the health of the resource record sets in a weighted,
	// latency, geolocation, or failover resource record set, and you specify health
	// check IDs for all of the resource record sets. If the health check for one
	// resource record set specifies an endpoint that is not healthy, Amazon Route
	// 53 stops responding to queries using the value for that resource record set.
	//
	//   You set EvaluateTargetHealth to true for the resource record sets in an
	// alias, weighted alias, latency alias, geolocation alias, or failover alias
	// resource record set, and you specify health check IDs for all of the resource
	// record sets that are referenced by the alias resource record sets.
	//
	//    Amazon Route 53 doesn't check the health of the endpoint specified in
	// the resource record set, for example, the endpoint specified by the IP address
	// in the Value element. When you add a HealthCheckId element to a resource
	// record set, Amazon Route 53 checks the health of the endpoint that you specified
	// in the health check.
	//
	//  For geolocation resource record sets, if an endpoint is unhealthy, Amazon
	// Route 53 looks for a resource record set for the larger, associated geographic
	// region. For example, suppose you have resource record sets for a state in
	// the United States, for the United States, for North America, and for all
	// locations. If the endpoint for the state resource record set is unhealthy,
	// Amazon Route 53 checks the resource record sets for the United States, for
	// North America, and for all locations (a resource record set for which the
	// value of CountryCode is *), in that order, until it finds a resource record
	// set for which the endpoint is healthy.
	//
	// If your health checks specify the endpoint only by domain name, we recommend
	// that you create a separate health check for each endpoint. For example, create
	// a health check for each HTTP server that is serving content for www.example.com.
	// For the value of FullyQualifiedDomainName, specify the domain name of the
	// server (such as us-east-1-www.example.com), not the name of the resource
	// record sets (example.com).
	//
	//  n this configuration, if you create a health check for which the value
	// of FullyQualifiedDomainName matches the name of the resource record sets
	// and then associate the health check with those resource record sets, health
	// check results will be unpredictable.
	//
	//  For more informaiton, see the following topics in the Amazon Route 53 Developer
	// Guide:
	//
	//    Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	HealthCheckId *string `type:"string"`

	// The name of the domain you want to perform the action on.
	//
	// Enter a fully qualified domain name, for example, www.example.com. You can
	// optionally include a trailing dot. If you omit the trailing dot, Amazon Route
	// 53 still assumes that the domain name that you specify is fully qualified.
	// This means that Amazon Route 53 treats www.example.com (without a trailing
	// dot) and www.example.com. (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see DNS Domain
	// Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a
	// domain name. For example, *.example.com. Note the following:
	//
	//   The * must replace the entire label. For example, you can't specify *prod.example.com
	// or prod*.example.com.
	//
	//   The * can't replace any of the middle labels, for example, marketing.*.example.com.
	//
	//   If you include * in any position other than the leftmost label in a domain
	// name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	//  You can't use the * wildcard for resource records sets that have a type
	// of NS.
	//
	//    You can use the * wildcard as the leftmost label in a domain name, for
	// example, *.example.com. You cannot use an * for one of the middle labels,
	// for example, marketing.*.example.com. In addition, the * must replace the
	// entire label; for example, you can't specify prod*.example.com.
	Name *string `type:"string" required:"true"`

	// Latency-based resource record sets only: The Amazon EC2 region where the
	// resource that is specified in this resource record set resides. The resource
	// typically is an AWS resource, such as an Amazon EC2 instance or an ELB load
	// balancer, and is referred to by an IP address or a DNS domain name, depending
	// on the record type.
	//
	//  Creating latency and latency alias resource record sets in private hosted
	// zones is not supported.
	//
	//  When Amazon Route 53 receives a DNS query for a domain name and type for
	// which you have created latency resource record sets, Amazon Route 53 selects
	// the latency resource record set that has the lowest latency between the end
	// user and the associated Amazon EC2 region. Amazon Route 53 then returns the
	// value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	//   You can only specify one ResourceRecord per latency resource record set.
	//
	//   You can only create one latency resource record set for each Amazon EC2
	// region.
	//
	//   You are not required to create latency resource record sets for all Amazon
	// EC2 regions. Amazon Route 53 will choose the region with the best latency
	// from among the regions for which you create latency resource record sets.
	//
	//   You cannot create non-latency resource record sets that have the same
	// values for the Name and Type elements as latency resource record sets.
	Region *string `min:"1" type:"string" enum:"ResourceRecordSetRegion"`

	// Information about the resource records to act upon.
	//
	//  If you are creating an alias resource record set, omit ResourceRecords.
	ResourceRecords []*ResourceRecord `locationNameList:"ResourceRecord" min:"1" type:"list"`

	// Weighted, Latency, Geo, and Failover resource record sets only: An identifier
	// that differentiates among multiple resource record sets that have the same
	// combination of DNS name and type. The value of SetIdentifier must be unique
	// for each resource record set that has the same combination of DNS name and
	// type. Omit SetIdentifier for any other types of record sets.
	SetIdentifier *string `min:"1" type:"string"`

	// The resource record cache time to live (TTL), in seconds. Note the following:
	//
	//   If you're creating an alias resource record set, omit TTL. Amazon Route
	// 53 uses the value of TTL for the alias target.
	//
	//   If you're associating this resource record set with a health check (if
	// you're adding a HealthCheckId element), we recommend that you specify a TTL
	// of 60 seconds or less so clients respond quickly to changes in health status.
	//
	//   All of the resource record sets in a group of weighted, latency, geolocation,
	// or failover resource record sets must have the same value for TTL.
	//
	//   If a group of weighted resource record sets includes one or more weighted
	// alias resource record sets for which the alias target is an ELB load balancer,
	// we recommend that you specify a TTL of 60 seconds for all of the non-alias
	// weighted resource record sets that have the same name and type. Values other
	// than 60 seconds (the TTL for load balancers) will change the effect of the
	// values that you specify for Weight.
	TTL *int64 `type:"long"`

	TrafficPolicyInstanceId *string `type:"string"`

	// The DNS record type. For information about different record types and how
	// data is encoded for them, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// Valid values for basic resource record sets: A | AAAA | CNAME | MX | NAPTR
	// | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geolocation, and failover resource record
	// sets: A | AAAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT. When creating
	// a group of weighted, latency, geolocation, or failover resource record sets,
	// specify the same value for all of the resource record sets in the group.
	//
	//  SPF records were formerly used to verify the identity of the sender of
	// email messages. However, we no longer recommend that you create resource
	// record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework
	// (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated
	// to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to
	// some interoperability issues. Accordingly, its use is no longer appropriate
	// for SPF version 1; implementations are not to use it." In RFC 7208, see section
	// 14.1, The SPF DNS Record Type (http://tools.ietf.org/html/rfc7208#section-14.1).
	//
	//  Values for alias resource record sets:
	//
	//    CloudFront distributions: A
	//
	//    Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//    ELB load balancers: A | AAAA
	//
	//    Amazon S3 buckets: A
	//
	//    Another resource record set in this hosted zone: Specify the type of
	// the resource record set for which you're creating the alias. Specify any
	// value except NS or SOA.
	Type *string `type:"string" required:"true" enum:"RRType"`

	// Weighted resource record sets only: Among resource record sets that have
	// the same combination of DNS name and type, a value that determines the proportion
	// of DNS queries that Amazon Route 53 responds to using the current resource
	// record set. Amazon Route 53 calculates the sum of the weights for the resource
	// record sets that have the same combination of DNS name and type. Amazon Route
	// 53 then responds to queries based on the ratio of a resource's weight to
	// the total. Note the following:
	//
	//   You must specify a value for the Weight element for every weighted resource
	// record set.
	//
	//   You can only specify one ResourceRecord per weighted resource record set.
	//
	//   You cannot create latency, failover, or geolocation resource record sets
	// that have the same values for the Name and Type elements as weighted resource
	// record sets.
	//
	//   You can create a maximum of 100 weighted resource record sets that have
	// the same values for the Name and Type elements.
	//
	//   For weighted (but not weighted alias) resource record sets, if you set
	// Weight to 0 for a resource record set, Amazon Route 53 never responds to
	// queries with the applicable value for that resource record set. However,
	// if you set Weight to 0 for all resource record sets that have the same combination
	// of DNS name and type, traffic is routed to all resources with equal probability.
	//
	// The effect of setting Weight to 0 is different when you associate health
	// checks with weighted resource record sets. For more information, see Options
	// for Configuring Amazon Route 53 Active-Active and Active-Passive Failover
	// (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html)
	// in the Amazon Route 53 Developer Guide.
	Weight *int64 `type:"long"`
	// contains filtered or unexported fields
}

Information about the resource record set to create or delete.

func (ResourceRecordSet) GoString added in v0.6.5 

func (s ResourceRecordSet) GoString() string

GoString returns the string representation

func (ResourceRecordSet) String added in v0.6.5 

func (s ResourceRecordSet) String() string

String returns the string representation

func (*ResourceRecordSet) Validate added in v1.1.21 

func (s *ResourceRecordSet) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceTagSet 

type ResourceTagSet struct {

	// The ID for the specified resource.
	ResourceId *string `type:"string"`

	// The type of the resource.
	//
	//   The resource type for health checks is healthcheck.
	//
	//   The resource type for hosted zones is hostedzone.
	ResourceType *string `type:"string" enum:"TagResourceType"`

	// The tags associated with the specified resource.
	Tags []*Tag `locationNameList:"Tag" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type containing a resource and its associated tags.

func (ResourceTagSet) GoString added in v0.6.5 

func (s ResourceTagSet) GoString() string

GoString returns the string representation

func (ResourceTagSet) String added in v0.6.5 

func (s ResourceTagSet) String() string

String returns the string representation

type Route53 

type Route53 struct {
	*client.Client
}

Route53 is a client for Route 53. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New 

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Route53

New creates a new instance of the Route53 client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example: 

// Create a Route53 client from just a session.
svc := route53.New(mySession)

// Create a Route53 client with additional configuration
svc := route53.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Route53) AssociateVPCWithHostedZone 

func (c *Route53) AssociateVPCWithHostedZone(input *AssociateVPCWithHostedZoneInput) (*AssociateVPCWithHostedZoneOutput, error)

Associates an Amazon VPC with a private hosted zone. 

The VPC and the hosted zone must already exist, and you must have created

a private hosted zone. You cannot convert a public hosted zone into a private hosted zone. 

Send a POST request to the /Amazon Route 53 API version/hostedzone/hosted

zone ID/associatevpc resource. The request body must include an XML document with a AssociateVPCWithHostedZoneRequest element. The response returns the AssociateVPCWithHostedZoneResponse element. 

If you used different accounts to create the hosted zone and to create

the Amazon VPCs that you want to associate with the hosted zone, we need to update account permissions for you. For more information, see Associating Amazon VPCs and Private Hosted Zones That You Create with Different AWS Accounts (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/hosted-zone-private-associate-vpcs-different-accounts.html) in the Amazon Route 53 Developer Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.AssociateVPCWithHostedZoneInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
		Comment: aws.String("AssociateVPCComment"),
	}
	resp, err := svc.AssociateVPCWithHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) AssociateVPCWithHostedZoneRequest 

func (c *Route53) AssociateVPCWithHostedZoneRequest(input *AssociateVPCWithHostedZoneInput) (req *request.Request, output *AssociateVPCWithHostedZoneOutput)

AssociateVPCWithHostedZoneRequest generates a "aws/request.Request" representing the client's request for the AssociateVPCWithHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateVPCWithHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AssociateVPCWithHostedZoneRequest method.
req, resp := client.AssociateVPCWithHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ChangeResourceRecordSets 

func (c *Route53) ChangeResourceRecordSets(input *ChangeResourceRecordSetsInput) (*ChangeResourceRecordSetsOutput, error)

Create, change, update, or delete authoritative DNS information on all Amazon Route 53 servers. Send a POST request to: 

/2013-04-01/hostedzone/Amazon Route 53 hosted Zone ID/rrset resource.

The request body must include a document with a ChangeResourceRecordSetsRequest element. The request body contains a list of change items, known as a change batch. Change batches are considered transactional changes. When using the Amazon Route 53 API to change resource record sets, Amazon Route 53 either makes all or none of the changes in a change batch request. This ensures that Amazon Route 53 never partially implements the intended changes to the resource record sets in a hosted zone.

For example, a change batch request that deletes the CNAMErecord for www.example.com and creates an alias resource record set for www.example.com. Amazon Route 53 deletes the first resource record set and creates the second resource record set in a single operation. If either the DELETE or the CREATE action fails, then both changes (plus any other changes in the batch) fail, and the original CNAME record continues to exist. 

Due to the nature of transactional changes, you cannot delete the same

resource record set more than once in a single change batch. If you attempt to delete the same change batch more than once, Amazon Route 53 returns an InvalidChangeBatch error. 

To create resource record sets for complex routing configurations, use

either the traffic flow visual editor in the Amazon Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route DNS Traffic (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/traffic-flow.html) in the Amazon Route 53 API Reference or Actions on Traffic Policies and Traffic Policy Instances (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/actions-on-polices) in this guide. 

Use ChangeResourceRecordsSetsRequest to perform the following actions:

  CREATE:Creates a resource record set that has the specified values.

  DELETE: Deletes an existing resource record set that has the specified

values for Name, Type, Set Identifier (for code latency, weighted, geolocation, and failover resource record sets), and TTL (except alias resource record sets, for which the TTL is determined by the AWS resource you're routing queries to). 

UPSERT: If a resource record set does not already exist, AWS creates

it. If a resource set does exist, Amazon Route 53 updates it with the values in the request. Amazon Route 53 can update an existing resource record set only when all of the following values match: Name, Type, and Set Identifier (for weighted, latency, geolocation, and failover resource record sets). 

In response to a ChangeResourceRecordSets request, the DNS data is changed

on all Amazon Route 53 DNS servers. Initially, the status of a change is PENDING, meaning the change has not yet propagated to all the authoritative Amazon Route 53 DNS servers. When the change is propagated to all hosts, the change returns a status of INSYNC.

After sending a change request, confirm your change has propagated to all Amazon Route 53 DNS servers. Changes generally propagate to all Amazon Route 53 name servers in a few minutes. In rare circumstances, propagation can take up to 30 minutes. For more information, see GetChange.

Note the following limitations on a ChangeResourceRecordSets request: 

 A request cannot contain more than 100 Change elements.

 A request cannot contain more than 1000 ResourceRecord elements.

The sum of the number of characters (including spaces) in all Value elements

in a request cannot exceed 32,000 characters. 

If the value of the Action element in a ChangeResourceRecordSets request

is UPSERT and the resource record set already exists, Amazon Route 53 automatically performs a DELETE request and a CREATE request. When Amazon Route 53 calculates the number of characters in the Value elements of a change batch request, it adds the number of characters in the Value element of the resource record set being deleted and the number of characters in the Value element of the resource record set being created. 

The same resource cannot be deleted more than once in a single batch.

If the value of the Action element in a ChangeResourceRecordSets request

is UPSERT and the resource record set already exists, Amazon Route 53 automatically performs a DELETE request and a CREATE request. When Amazon Route 53 calculates the number of characters in the Value elements of a change batch request, it adds the number of characters in the Value element of the resource record set being deleted and the number of characters in the Value element of the resource record set being created. 

For more information on transactional changes, see ChangeResourceRecordSets.
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{ // Required
			Changes: []*route53.Change{ // Required
				{ // Required
					Action: aws.String("ChangeAction"), // Required
					ResourceRecordSet: &route53.ResourceRecordSet{ // Required
						Name: aws.String("DNSName"), // Required
						Type: aws.String("RRType"),  // Required
						AliasTarget: &route53.AliasTarget{
							DNSName:              aws.String("DNSName"),    // Required
							EvaluateTargetHealth: aws.Bool(true),           // Required
							HostedZoneId:         aws.String("ResourceId"), // Required
						},
						Failover: aws.String("ResourceRecordSetFailover"),
						GeoLocation: &route53.GeoLocation{
							ContinentCode:   aws.String("GeoLocationContinentCode"),
							CountryCode:     aws.String("GeoLocationCountryCode"),
							SubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
						},
						HealthCheckId: aws.String("HealthCheckId"),
						Region:        aws.String("ResourceRecordSetRegion"),
						ResourceRecords: []*route53.ResourceRecord{
							{ // Required
								Value: aws.String("RData"), // Required
							},
							// More values...
						},
						SetIdentifier:           aws.String("ResourceRecordSetIdentifier"),
						TTL:                     aws.Int64(1),
						TrafficPolicyInstanceId: aws.String("TrafficPolicyInstanceId"),
						Weight:                  aws.Int64(1),
					},
				},
				// More values...
			},
			Comment: aws.String("ResourceDescription"),
		},
		HostedZoneId: aws.String("ResourceId"), // Required
	}
	resp, err := svc.ChangeResourceRecordSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ChangeResourceRecordSetsRequest 

func (c *Route53) ChangeResourceRecordSetsRequest(input *ChangeResourceRecordSetsInput) (req *request.Request, output *ChangeResourceRecordSetsOutput)

ChangeResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ChangeResourceRecordSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ChangeResourceRecordSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ChangeResourceRecordSetsRequest method.
req, resp := client.ChangeResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ChangeTagsForResource 

func (c *Route53) ChangeTagsForResource(input *ChangeTagsForResourceInput) (*ChangeTagsForResourceOutput, error)
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ChangeTagsForResourceInput{
		ResourceId:   aws.String("TagResourceId"),   // Required
		ResourceType: aws.String("TagResourceType"), // Required
		AddTags: []*route53.Tag{
			{ // Required
				Key:   aws.String("TagKey"),
				Value: aws.String("TagValue"),
			},
			// More values...
		},
		RemoveTagKeys: []*string{
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.ChangeTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ChangeTagsForResourceRequest 

func (c *Route53) ChangeTagsForResourceRequest(input *ChangeTagsForResourceInput) (req *request.Request, output *ChangeTagsForResourceOutput)

ChangeTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ChangeTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ChangeTagsForResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ChangeTagsForResourceRequest method.
req, resp := client.ChangeTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateHealthCheck 

func (c *Route53) CreateHealthCheck(input *CreateHealthCheckInput) (*CreateHealthCheckOutput, error)

Creates a new health check.

To create a new health check, send a POST request to the /2013-04-01/healthcheck resource. The request body must include an XML document with a CreateHealthCheckRequest element. The response returns the CreateHealthCheckResponse element, containing the health check ID specified when adding health check to a resource record set. For information about adding health checks to resource record sets, see ResourceRecordSet$HealthCheckId in ChangeResourceRecordSets.

If you are registering Amazon EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the Amazon EC2 instances. When you register an Amazon EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to an Amazon Route 53 health check.

You can associate health checks with failover resource record sets in a private hosted zone. Note the following: 

Amazon Route 53 health checkers are outside the VPC. To check the health

of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC. 

You can configure a health checker to check the health of an external

resource that the instance relies on, such as a database server. 

You can create a CloudWatch metric, associate an alarm with the metric,

and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the Amazon CloudWatch Developer Guide (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateHealthCheckInput{
		CallerReference: aws.String("HealthCheckNonce"), // Required
		HealthCheckConfig: &route53.HealthCheckConfig{ // Required
			Type: aws.String("HealthCheckType"), // Required
			AlarmIdentifier: &route53.AlarmIdentifier{
				Name:   aws.String("AlarmName"),        // Required
				Region: aws.String("CloudWatchRegion"), // Required
			},
			ChildHealthChecks: []*string{
				aws.String("HealthCheckId"), // Required
				// More values...
			},
			EnableSNI:                    aws.Bool(true),
			FailureThreshold:             aws.Int64(1),
			FullyQualifiedDomainName:     aws.String("FullyQualifiedDomainName"),
			HealthThreshold:              aws.Int64(1),
			IPAddress:                    aws.String("IPAddress"),
			InsufficientDataHealthStatus: aws.String("InsufficientDataHealthStatus"),
			Inverted:                     aws.Bool(true),
			MeasureLatency:               aws.Bool(true),
			Port:                         aws.Int64(1),
			Regions: []*string{
				aws.String("HealthCheckRegion"), // Required
				// More values...
			},
			RequestInterval: aws.Int64(1),
			ResourcePath:    aws.String("ResourcePath"),
			SearchString:    aws.String("SearchString"),
		},
	}
	resp, err := svc.CreateHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateHealthCheckRequest 

func (c *Route53) CreateHealthCheckRequest(input *CreateHealthCheckInput) (req *request.Request, output *CreateHealthCheckOutput)

CreateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the CreateHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateHealthCheckRequest method.
req, resp := client.CreateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateHostedZone 

func (c *Route53) CreateHostedZone(input *CreateHostedZoneInput) (*CreateHostedZoneOutput, error)

Creates a new public hosted zone, used to specify how the Domain Name System (DNS) routes traffic on the Internet for a domain, such as example.com, and its subdomains. 

Public hosted zones cannot be converted to a private hosted zone or vice

versa. Instead, create a new hosted zone with the same name and create new resource record sets. 

Send a POST request to the /Amazon Route 53 API version/hostedzone resource.

The request body must include an XML document with a CreateHostedZoneRequest element. The response returns the CreateHostedZoneResponse element containing metadata about the hosted zone.

Fore more information about charges for hosted zones, see AmazonAmazon Route 53 Pricing (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/pricing/).

Note the following: 

You cannot create a hosted zone for a top-level domain (TLD).

Amazon Route 53 automatically creates a default SOA record and four NS

records for the zone. For more information about SOA and NS records, see NS and SOA Records that Amazon Route 53 Creates for a Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/SOA-NSrecords.html) in the Amazon Route 53 Developer Guide. 

If your domain is registered with a registrar other than Amazon Route

53, you must update the name servers with your registrar to make Amazon Route 53 your DNS service. For more information, see Configuring Amazon Route 53 as your DNS Service (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/creating-migrating.html) in the Amazon Route 53 Developer's Guide. 

After creating a zone, its initial status is PENDING. This means that

it is not yet available on all DNS servers. The status of the zone changes to INSYNC when the NS and SOA records are available on all Amazon Route 53 DNS servers.

When trying to create a hosted zone using a reusable delegation set, specify an optional DelegationSetId, and Amazon Route 53 would assign those 4 NS records for the zone, instead of alloting a new one.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateHostedZoneInput{
		CallerReference: aws.String("Nonce"),   // Required
		Name:            aws.String("DNSName"), // Required
		DelegationSetId: aws.String("ResourceId"),
		HostedZoneConfig: &route53.HostedZoneConfig{
			Comment:     aws.String("ResourceDescription"),
			PrivateZone: aws.Bool(true),
		},
		VPC: &route53.VPC{
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
	}
	resp, err := svc.CreateHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateHostedZoneRequest 

func (c *Route53) CreateHostedZoneRequest(input *CreateHostedZoneInput) (req *request.Request, output *CreateHostedZoneOutput)

CreateHostedZoneRequest generates a "aws/request.Request" representing the client's request for the CreateHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateHostedZoneRequest method.
req, resp := client.CreateHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateReusableDelegationSet 

func (c *Route53) CreateReusableDelegationSet(input *CreateReusableDelegationSetInput) (*CreateReusableDelegationSetOutput, error)

Creates a delegation set (a group of four anem servers) that can be reused by multiple hosted zones. If a hosted zoned ID is specified, CreateReusableDelegationSet marks the delegation set associated with that zone as reusable

Send a POST request to the /Amazon Route 53 API version/delegationset resource. The request body must include an XML document with a CreateReusableDelegationSetRequest element. 

A reusable delegation set cannot be associated with a private hosted zone/

For more information, including a procedure on how to create and configure

a reusable delegation set (also known as white label name servers), see Configuring White Label Name Servers (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/white-label-name-servers.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateReusableDelegationSetInput{
		CallerReference: aws.String("Nonce"), // Required
		HostedZoneId:    aws.String("ResourceId"),
	}
	resp, err := svc.CreateReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateReusableDelegationSetRequest 

func (c *Route53) CreateReusableDelegationSetRequest(input *CreateReusableDelegationSetInput) (req *request.Request, output *CreateReusableDelegationSetOutput)

CreateReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the CreateReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateReusableDelegationSetRequest method.
req, resp := client.CreateReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicy added in v1.0.3 

func (c *Route53) CreateTrafficPolicy(input *CreateTrafficPolicyInput) (*CreateTrafficPolicyOutput, error)

Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com).

Send a POST request to the /Amazon Route 53 API version/trafficpolicy resource. The request body must include a document with a CreateTrafficPolicyRequest element. The response includes the CreateTrafficPolicyResponse element, which contains information about the new traffic policy.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyInput{
		Document: aws.String("TrafficPolicyDocument"), // Required
		Name:     aws.String("TrafficPolicyName"),     // Required
		Comment:  aws.String("TrafficPolicyComment"),
	}
	resp, err := svc.CreateTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateTrafficPolicyInstance added in v1.0.3 

func (c *Route53) CreateTrafficPolicyInstance(input *CreateTrafficPolicyInstanceInput) (*CreateTrafficPolicyInstanceOutput, error)

Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds to DNS queries for the domain or subdomain name by using the resource record sets that CreateTrafficPolicyInstance created.

Send a POST request to the /Amazon Route 53 API version/trafficpolicyinstance resource. The request body must include a document with a CreateTrafficPolicyRequest element. The response returns the CreateTrafficPolicyInstanceResponse element, which contains information about the traffic policy instance.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyInstanceInput{
		HostedZoneId:         aws.String("ResourceId"),      // Required
		Name:                 aws.String("DNSName"),         // Required
		TTL:                  aws.Int64(1),                  // Required
		TrafficPolicyId:      aws.String("TrafficPolicyId"), // Required
		TrafficPolicyVersion: aws.Int64(1),                  // Required
	}
	resp, err := svc.CreateTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateTrafficPolicyInstanceRequest added in v1.0.3 

func (c *Route53) CreateTrafficPolicyInstanceRequest(input *CreateTrafficPolicyInstanceInput) (req *request.Request, output *CreateTrafficPolicyInstanceOutput)

CreateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTrafficPolicyInstanceRequest method.
req, resp := client.CreateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicyRequest added in v1.0.3 

func (c *Route53) CreateTrafficPolicyRequest(input *CreateTrafficPolicyInput) (req *request.Request, output *CreateTrafficPolicyOutput)

CreateTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTrafficPolicyRequest method.
req, resp := client.CreateTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) CreateTrafficPolicyVersion added in v1.0.3 

func (c *Route53) CreateTrafficPolicyVersion(input *CreateTrafficPolicyVersionInput) (*CreateTrafficPolicyVersionOutput, error)

Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic policy.

Send a POST request to the /Amazon Route 53 version/trafficpolicy/ resource. The request body includes a document with a CreateTrafficPolicyVersionRequest element. The response returns the CreateTrafficPolicyVersionResponse element, which contains information about the new version of the traffic policy.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.CreateTrafficPolicyVersionInput{
		Document: aws.String("TrafficPolicyDocument"), // Required
		Id:       aws.String("TrafficPolicyId"),       // Required
		Comment:  aws.String("TrafficPolicyComment"),
	}
	resp, err := svc.CreateTrafficPolicyVersion(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) CreateTrafficPolicyVersionRequest added in v1.0.3 

func (c *Route53) CreateTrafficPolicyVersionRequest(input *CreateTrafficPolicyVersionInput) (req *request.Request, output *CreateTrafficPolicyVersionOutput)

CreateTrafficPolicyVersionRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyVersion operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTrafficPolicyVersion method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTrafficPolicyVersionRequest method.
req, resp := client.CreateTrafficPolicyVersionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteHealthCheck 

func (c *Route53) DeleteHealthCheck(input *DeleteHealthCheckInput) (*DeleteHealthCheckOutput, error)

Deletes a health check. Send a DELETE request to the /2013-04-01/healthcheck/health check ID resource. 

Amazon Route 53 does not prevent you from deleting a health check even

if the health check is associated with one or more resource record sets. If you delete a health check and you don't update the associated resource record sets, the future status of the health check cannot be predicted and may change. This will affect the routing of DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html#health-checks-deleting.html) in the Amazon Route 53 Developer Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.DeleteHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DeleteHealthCheckRequest 

func (c *Route53) DeleteHealthCheckRequest(input *DeleteHealthCheckInput) (req *request.Request, output *DeleteHealthCheckOutput)

DeleteHealthCheckRequest generates a "aws/request.Request" representing the client's request for the DeleteHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteHealthCheckRequest method.
req, resp := client.DeleteHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteHostedZone 

func (c *Route53) DeleteHostedZone(input *DeleteHostedZoneInput) (*DeleteHostedZoneOutput, error)

Deletes a hosted zone. Send a DELETE request to the /Amazon Route 53 API version/hostedzone/hosted zone ID resource. 

Delete a hosted zone only if there are no resource record sets other than

the default SOA record and NS resource record sets. If the hosted zone contains other resource record sets, delete them before deleting the hosted zone. If you try to delete a hosted zone that contains other resource record sets, Amazon Route 53 denies your request with a HostedZoneNotEmpty error. For information about deleting records from your hosted zone, see ChangeResourceRecordSets.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteHostedZoneInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.DeleteHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DeleteHostedZoneRequest 

func (c *Route53) DeleteHostedZoneRequest(input *DeleteHostedZoneInput) (req *request.Request, output *DeleteHostedZoneOutput)

DeleteHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DeleteHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteHostedZoneRequest method.
req, resp := client.DeleteHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteReusableDelegationSet 

func (c *Route53) DeleteReusableDelegationSet(input *DeleteReusableDelegationSetInput) (*DeleteReusableDelegationSetOutput, error)

Deletes a reusable delegation set. Send a DELETE request to the /2013-04-01/delegationset/delegation set ID resource. 

You can delete a reusable delegation set only if there are no associated

hosted zones. 

To verify that the reusable delegation set is not associated with any hosted

zones, run the GetReusableDelegationSet action and specify the ID of the reusable delegation set that you want to delete.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteReusableDelegationSetInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.DeleteReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DeleteReusableDelegationSetRequest 

func (c *Route53) DeleteReusableDelegationSetRequest(input *DeleteReusableDelegationSetInput) (req *request.Request, output *DeleteReusableDelegationSetOutput)

DeleteReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the DeleteReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteReusableDelegationSetRequest method.
req, resp := client.DeleteReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteTrafficPolicy added in v1.0.3 

func (c *Route53) DeleteTrafficPolicy(input *DeleteTrafficPolicyInput) (*DeleteTrafficPolicyOutput, error)

Deletes a traffic policy.

Send a DELETE request to the /Amazon Route 53 API version/trafficpolicy resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteTrafficPolicyInput{
		Id:      aws.String("TrafficPolicyId"), // Required
		Version: aws.Int64(1),                  // Required
	}
	resp, err := svc.DeleteTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DeleteTrafficPolicyInstance added in v1.0.3 

func (c *Route53) DeleteTrafficPolicyInstance(input *DeleteTrafficPolicyInstanceInput) (*DeleteTrafficPolicyInstanceOutput, error)

Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you created the instance.

Send a DELETE request to the /Amazon Route 53 API version/trafficpolicy/traffic policy instance ID resource. 

In the Amazon Route 53 console, traffic policy instances are known as policy

records.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DeleteTrafficPolicyInstanceInput{
		Id: aws.String("TrafficPolicyInstanceId"), // Required
	}
	resp, err := svc.DeleteTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DeleteTrafficPolicyInstanceRequest added in v1.0.3 

func (c *Route53) DeleteTrafficPolicyInstanceRequest(input *DeleteTrafficPolicyInstanceInput) (req *request.Request, output *DeleteTrafficPolicyInstanceOutput)

DeleteTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteTrafficPolicyInstanceRequest method.
req, resp := client.DeleteTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DeleteTrafficPolicyRequest added in v1.0.3 

func (c *Route53) DeleteTrafficPolicyRequest(input *DeleteTrafficPolicyInput) (req *request.Request, output *DeleteTrafficPolicyOutput)

DeleteTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteTrafficPolicyRequest method.
req, resp := client.DeleteTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) DisassociateVPCFromHostedZone 

func (c *Route53) DisassociateVPCFromHostedZone(input *DisassociateVPCFromHostedZoneInput) (*DisassociateVPCFromHostedZoneOutput, error)

Disassociates a VPC from a Amazon Route 53 private hosted zone.

Send a POST request to the /Amazon Route 53 API version/hostedzone/hosted zone ID/disassociatevpc resource. The request body must include an XML document with a DisassociateVPCFromHostedZoneRequest element. The response returns the DisassociateVPCFromHostedZoneResponse element. 

You can only disassociate a VPC from a private hosted zone when two or

more VPCs are associated with that hosted zone. You cannot convert a private hosted zone into a public hosted zone.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.DisassociateVPCFromHostedZoneInput{
		HostedZoneId: aws.String("ResourceId"), // Required
		VPC: &route53.VPC{ // Required
			VPCId:     aws.String("VPCId"),
			VPCRegion: aws.String("VPCRegion"),
		},
		Comment: aws.String("DisassociateVPCComment"),
	}
	resp, err := svc.DisassociateVPCFromHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) DisassociateVPCFromHostedZoneRequest 

func (c *Route53) DisassociateVPCFromHostedZoneRequest(input *DisassociateVPCFromHostedZoneInput) (req *request.Request, output *DisassociateVPCFromHostedZoneOutput)

DisassociateVPCFromHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DisassociateVPCFromHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateVPCFromHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisassociateVPCFromHostedZoneRequest method.
req, resp := client.DisassociateVPCFromHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetChange 

func (c *Route53) GetChange(input *GetChangeInput) (*GetChangeOutput, error)

Returns the current status of a change batch request. The status is one of the following values: 

PENDING indicates that the changes in this request have not replicated

to all Amazon Route 53 DNS servers. This is the initial status of all change batch requests. 

INSYNC indicates that the changes have replicated to all Amazon Route

53 DNS servers.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetChangeInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetChange(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetChangeDetails added in v1.0.3 

func (c *Route53) GetChangeDetails(input *GetChangeDetailsInput) (*GetChangeDetailsOutput, error)

Returns the status and changes of a change batch request.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetChangeDetailsInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetChangeDetails(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetChangeDetailsRequest added in v1.0.3 

func (c *Route53) GetChangeDetailsRequest(input *GetChangeDetailsInput) (req *request.Request, output *GetChangeDetailsOutput)

GetChangeDetailsRequest generates a "aws/request.Request" representing the client's request for the GetChangeDetails operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetChangeDetails method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetChangeDetailsRequest method.
req, resp := client.GetChangeDetailsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetChangeRequest 

func (c *Route53) GetChangeRequest(input *GetChangeInput) (req *request.Request, output *GetChangeOutput)

GetChangeRequest generates a "aws/request.Request" representing the client's request for the GetChange operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetChange method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetChangeRequest method.
req, resp := client.GetChangeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetCheckerIpRanges added in v0.9.5 

func (c *Route53) GetCheckerIpRanges(input *GetCheckerIpRangesInput) (*GetCheckerIpRangesOutput, error)

Retrieves a list of the IP ranges used by Amazon Route 53 health checkers to check the health of your resources. Send a GET request to the /Amazon Route 53 API version/checkeripranges resource. Use these IP addresses to configure router and firewall rules to allow health checkers to check the health of your resources.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetCheckerIpRangesInput
	resp, err := svc.GetCheckerIpRanges(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetCheckerIpRangesRequest added in v0.9.5 

func (c *Route53) GetCheckerIpRangesRequest(input *GetCheckerIpRangesInput) (req *request.Request, output *GetCheckerIpRangesOutput)

GetCheckerIpRangesRequest generates a "aws/request.Request" representing the client's request for the GetCheckerIpRanges operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetCheckerIpRanges method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetCheckerIpRangesRequest method.
req, resp := client.GetCheckerIpRangesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetGeoLocation 

func (c *Route53) GetGeoLocation(input *GetGeoLocationInput) (*GetGeoLocationOutput, error)

Retrieves a single geo location. Send a GET request to the /2013-04-01/geolocation resource with one of these options: continentcode | countrycode | countrycode and subdivisioncode.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetGeoLocationInput{
		ContinentCode:   aws.String("GeoLocationContinentCode"),
		CountryCode:     aws.String("GeoLocationCountryCode"),
		SubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
	}
	resp, err := svc.GetGeoLocation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetGeoLocationRequest 

func (c *Route53) GetGeoLocationRequest(input *GetGeoLocationInput) (req *request.Request, output *GetGeoLocationOutput)

GetGeoLocationRequest generates a "aws/request.Request" representing the client's request for the GetGeoLocation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetGeoLocation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetGeoLocationRequest method.
req, resp := client.GetGeoLocationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheck 

func (c *Route53) GetHealthCheck(input *GetHealthCheckInput) (*GetHealthCheckOutput, error)

Gets information about a specified health check. Send a GET request to the /2013-04-01/healthcheck/health check ID resource. For more information about using the console to perform this operation, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html) in the Amazon Route 53 Developer Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHealthCheckCount 

func (c *Route53) GetHealthCheckCount(input *GetHealthCheckCountInput) (*GetHealthCheckCountOutput, error)

To retrieve a count of all your health checks, send a GET request to the /2013-04-01/healthcheckcount resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetHealthCheckCountInput
	resp, err := svc.GetHealthCheckCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHealthCheckCountRequest 

func (c *Route53) GetHealthCheckCountRequest(input *GetHealthCheckCountInput) (req *request.Request, output *GetHealthCheckCountOutput)

GetHealthCheckCountRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHealthCheckCountRequest method.
req, resp := client.GetHealthCheckCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckLastFailureReason 

func (c *Route53) GetHealthCheckLastFailureReason(input *GetHealthCheckLastFailureReasonInput) (*GetHealthCheckLastFailureReasonOutput, error)

If you want to learn why a health check is currently failing or why it failed most recently (if at all), you can get the failure reason for the most recent failure. Send a GET request to the /Amazon Route 53 API version/healthcheck/health check ID/lastfailurereason resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckLastFailureReasonInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheckLastFailureReason(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHealthCheckLastFailureReasonRequest 

func (c *Route53) GetHealthCheckLastFailureReasonRequest(input *GetHealthCheckLastFailureReasonInput) (req *request.Request, output *GetHealthCheckLastFailureReasonOutput)

GetHealthCheckLastFailureReasonRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckLastFailureReason operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckLastFailureReason method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHealthCheckLastFailureReasonRequest method.
req, resp := client.GetHealthCheckLastFailureReasonRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckRequest 

func (c *Route53) GetHealthCheckRequest(input *GetHealthCheckInput) (req *request.Request, output *GetHealthCheckOutput)

GetHealthCheckRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHealthCheckRequest method.
req, resp := client.GetHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHealthCheckStatus 

func (c *Route53) GetHealthCheckStatus(input *GetHealthCheckStatusInput) (*GetHealthCheckStatusOutput, error)

Gets status of a specified health check. Send a GET request to the /2013-04-01/healthcheck/health check ID/status resource. You can use this call to get a health check's current status.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHealthCheckStatusInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
	}
	resp, err := svc.GetHealthCheckStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHealthCheckStatusRequest 

func (c *Route53) GetHealthCheckStatusRequest(input *GetHealthCheckStatusInput) (req *request.Request, output *GetHealthCheckStatusOutput)

GetHealthCheckStatusRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHealthCheckStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHealthCheckStatusRequest method.
req, resp := client.GetHealthCheckStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHostedZone 

func (c *Route53) GetHostedZone(input *GetHostedZoneInput) (*GetHostedZoneOutput, error)

Retrieves the delegation set for a hosted zone, including the four name servers assigned to the hosted zone. Send a GET request to the /Amazon Route 53 API version/hostedzone/hosted zone ID resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetHostedZoneInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHostedZoneCount 

func (c *Route53) GetHostedZoneCount(input *GetHostedZoneCountInput) (*GetHostedZoneCountOutput, error)

Retrieves a count of all your hosted zones. Send a GET request to the /2013-04-01/hostedzonecount resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetHostedZoneCountInput
	resp, err := svc.GetHostedZoneCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetHostedZoneCountRequest 

func (c *Route53) GetHostedZoneCountRequest(input *GetHostedZoneCountInput) (req *request.Request, output *GetHostedZoneCountOutput)

GetHostedZoneCountRequest generates a "aws/request.Request" representing the client's request for the GetHostedZoneCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHostedZoneCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHostedZoneCountRequest method.
req, resp := client.GetHostedZoneCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetHostedZoneRequest 

func (c *Route53) GetHostedZoneRequest(input *GetHostedZoneInput) (req *request.Request, output *GetHostedZoneOutput)

GetHostedZoneRequest generates a "aws/request.Request" representing the client's request for the GetHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHostedZoneRequest method.
req, resp := client.GetHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetReusableDelegationSet 

func (c *Route53) GetReusableDelegationSet(input *GetReusableDelegationSetInput) (*GetReusableDelegationSetOutput, error)

Retrieves the reusable delegation set. Send a GET request to the /2013-04-01/delegationset/delegation set ID resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetReusableDelegationSetInput{
		Id: aws.String("ResourceId"), // Required
	}
	resp, err := svc.GetReusableDelegationSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetReusableDelegationSetRequest 

func (c *Route53) GetReusableDelegationSetRequest(input *GetReusableDelegationSetInput) (req *request.Request, output *GetReusableDelegationSetOutput)

GetReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the GetReusableDelegationSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetReusableDelegationSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetReusableDelegationSetRequest method.
req, resp := client.GetReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicy added in v1.0.3 

func (c *Route53) GetTrafficPolicy(input *GetTrafficPolicyInput) (*GetTrafficPolicyOutput, error)

Gets information about a specific traffic policy version.

Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetTrafficPolicyInput{
		Id:      aws.String("TrafficPolicyId"), // Required
		Version: aws.Int64(1),                  // Required
	}
	resp, err := svc.GetTrafficPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetTrafficPolicyInstance added in v1.0.3 

func (c *Route53) GetTrafficPolicyInstance(input *GetTrafficPolicyInstanceInput) (*GetTrafficPolicyInstanceOutput, error)

Gets information about a specified traffic policy instance.

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance resource. 

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance

request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. 

In the Amazon Route 53 console, traffic policy instances are known as

policy records.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.GetTrafficPolicyInstanceInput{
		Id: aws.String("TrafficPolicyInstanceId"), // Required
	}
	resp, err := svc.GetTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetTrafficPolicyInstanceCount added in v1.0.3 

func (c *Route53) GetTrafficPolicyInstanceCount(input *GetTrafficPolicyInstanceCountInput) (*GetTrafficPolicyInstanceCountOutput, error)

Gets the number of traffic policy instances that are associated with the current AWS account.

To get the number of traffic policy instances, send a GET request to the /2013-04-01/trafficpolicyinstancecount resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	var params *route53.GetTrafficPolicyInstanceCountInput
	resp, err := svc.GetTrafficPolicyInstanceCount(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) GetTrafficPolicyInstanceCountRequest added in v1.0.3 

func (c *Route53) GetTrafficPolicyInstanceCountRequest(input *GetTrafficPolicyInstanceCountInput) (req *request.Request, output *GetTrafficPolicyInstanceCountOutput)

GetTrafficPolicyInstanceCountRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstanceCount operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicyInstanceCount method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetTrafficPolicyInstanceCountRequest method.
req, resp := client.GetTrafficPolicyInstanceCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicyInstanceRequest added in v1.0.3 

func (c *Route53) GetTrafficPolicyInstanceRequest(input *GetTrafficPolicyInstanceInput) (req *request.Request, output *GetTrafficPolicyInstanceOutput)

GetTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetTrafficPolicyInstanceRequest method.
req, resp := client.GetTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) GetTrafficPolicyRequest added in v1.0.3 

func (c *Route53) GetTrafficPolicyRequest(input *GetTrafficPolicyInput) (req *request.Request, output *GetTrafficPolicyOutput)

GetTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetTrafficPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetTrafficPolicyRequest method.
req, resp := client.GetTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListChangeBatchesByHostedZone added in v1.0.3 

func (c *Route53) ListChangeBatchesByHostedZone(input *ListChangeBatchesByHostedZoneInput) (*ListChangeBatchesByHostedZoneOutput, error)

Gets the list of ChangeBatches in a given time period for a given hosted zone.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListChangeBatchesByHostedZoneInput{
		EndDate:      aws.String("Date"),       // Required
		HostedZoneId: aws.String("ResourceId"), // Required
		StartDate:    aws.String("Date"),       // Required
		Marker:       aws.String("PageMarker"),
		MaxItems:     aws.String("PageMaxItems"),
	}
	resp, err := svc.ListChangeBatchesByHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListChangeBatchesByHostedZoneRequest added in v1.0.3 

func (c *Route53) ListChangeBatchesByHostedZoneRequest(input *ListChangeBatchesByHostedZoneInput) (req *request.Request, output *ListChangeBatchesByHostedZoneOutput)

ListChangeBatchesByHostedZoneRequest generates a "aws/request.Request" representing the client's request for the ListChangeBatchesByHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListChangeBatchesByHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListChangeBatchesByHostedZoneRequest method.
req, resp := client.ListChangeBatchesByHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListChangeBatchesByRRSet added in v1.0.3 

func (c *Route53) ListChangeBatchesByRRSet(input *ListChangeBatchesByRRSetInput) (*ListChangeBatchesByRRSetOutput, error)

Gets the list of ChangeBatches in a given time period for a given hosted zone and RRSet.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListChangeBatchesByRRSetInput{
		EndDate:       aws.String("Date"),       // Required
		HostedZoneId:  aws.String("ResourceId"), // Required
		Name:          aws.String("DNSName"),    // Required
		StartDate:     aws.String("Date"),       // Required
		Type:          aws.String("RRType"),     // Required
		Marker:        aws.String("PageMarker"),
		MaxItems:      aws.String("PageMaxItems"),
		SetIdentifier: aws.String("ResourceRecordSetIdentifier"),
	}
	resp, err := svc.ListChangeBatchesByRRSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListChangeBatchesByRRSetRequest added in v1.0.3 

func (c *Route53) ListChangeBatchesByRRSetRequest(input *ListChangeBatchesByRRSetInput) (req *request.Request, output *ListChangeBatchesByRRSetOutput)

ListChangeBatchesByRRSetRequest generates a "aws/request.Request" representing the client's request for the ListChangeBatchesByRRSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListChangeBatchesByRRSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListChangeBatchesByRRSetRequest method.
req, resp := client.ListChangeBatchesByRRSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListGeoLocations 

func (c *Route53) ListGeoLocations(input *ListGeoLocationsInput) (*ListGeoLocationsOutput, error)

Retrieves a list of supported geo locations. Send a GET request to the /2013-04-01/geolocations resource. The response to this request includes a GeoLocationDetailsList element for each location that Amazon Route 53 supports.

Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListGeoLocationsInput{
		MaxItems:             aws.String("PageMaxItems"),
		StartContinentCode:   aws.String("GeoLocationContinentCode"),
		StartCountryCode:     aws.String("GeoLocationCountryCode"),
		StartSubdivisionCode: aws.String("GeoLocationSubdivisionCode"),
	}
	resp, err := svc.ListGeoLocations(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListGeoLocationsRequest 

func (c *Route53) ListGeoLocationsRequest(input *ListGeoLocationsInput) (req *request.Request, output *ListGeoLocationsOutput)

ListGeoLocationsRequest generates a "aws/request.Request" representing the client's request for the ListGeoLocations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListGeoLocations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListGeoLocationsRequest method.
req, resp := client.ListGeoLocationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHealthChecks 

func (c *Route53) ListHealthChecks(input *ListHealthChecksInput) (*ListHealthChecksOutput, error)

Retrieve a list of your health checks. Send a GET request to the /2013-04-01/healthcheck resource. The response to this request includes a HealthChecks element with zero or more HealthCheck child elements. By default, the list of health checks is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the health check that the list begins with.

For information about listing health checks using the Amazon Route 53 console, see Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHealthChecksInput{
		Marker:   aws.String("PageMarker"),
		MaxItems: aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHealthChecks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListHealthChecksPages 

func (c *Route53) ListHealthChecksPages(input *ListHealthChecksInput, fn func(p *ListHealthChecksOutput, lastPage bool) (shouldContinue bool)) error

ListHealthChecksPages iterates over the pages of a ListHealthChecks operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHealthChecks method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a ListHealthChecks operation.
pageNum := 0
err := client.ListHealthChecksPages(params,
    func(page *ListHealthChecksOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHealthChecksRequest 

func (c *Route53) ListHealthChecksRequest(input *ListHealthChecksInput) (req *request.Request, output *ListHealthChecksOutput)

ListHealthChecksRequest generates a "aws/request.Request" representing the client's request for the ListHealthChecks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHealthChecks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListHealthChecksRequest method.
req, resp := client.ListHealthChecksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHostedZones 

func (c *Route53) ListHostedZones(input *ListHostedZonesInput) (*ListHostedZonesOutput, error)

To retrieve a list of your public and private hosted zones, send a GET request to the /2013-04-01/hostedzone resource. The response to this request includes a HostedZones child element for each hosted zone created by the current AWS account.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100. The response includes four values that help navigate from one group of maxitems hosted zones to the next: 

MaxItemsis the value specified for the maxitems parameter in the request

that produced the current response. 

If the value of IsTruncated in the response is true, there are more hosted

zones associated with the current AWS account. 

NextMarkeris the hosted zone ID of the next hosted zone that is associated

with the current AWS account. If you want to list more hosted zones, make another call to ListHostedZones, and specify the value of the NextMarker element in the marker parameter.

If IsTruncated is false, the NextMarker element is omitted from the response. 

If you're making the second or subsequent call to ListHostedZones, the

Marker element matches the value that you specified in the marker parameter in the previous request.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHostedZonesInput{
		DelegationSetId: aws.String("ResourceId"),
		Marker:          aws.String("PageMarker"),
		MaxItems:        aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHostedZones(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListHostedZonesByName 

func (c *Route53) ListHostedZonesByName(input *ListHostedZonesByNameInput) (*ListHostedZonesByNameOutput, error)

Retrieves a list of your hosted zones in lexicographic order. Send a GET request to the /2013-04-01/hostedzonesbyname resource. The response includes a HostedZones child element for each hosted zone created by the current AWS account. 

ListHostedZonesByName sorts hosted zones by name with the labels reversed.

For example: 

 com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for example.com, specify ex\344mple.com for the domain name. ListHostedZonesByName alphabetizes it as: 

 com.ex\344mple.

The labels are reversed and alphabetized using the escaped value. For

more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the Amazon Route 53 Developer Guide.

Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the MaxItems parameter to list them in groups of up to 100. The response includes values that help navigate from one group of MaxItems hosted zones to the next: 

The DNSName and HostedZoneId elements in the response contain the values,

if any, specified for the dnsname and hostedzoneid parameters in the request that produced the current response. 

The MaxItems element in the response contains the value, if any, that

you specified for the maxitems parameter in the request that produced the current response. 

If the value of IsTruncated in the response is true, there are more hosted

zones associated with the current AWS account.

If IsTruncated is false, this response includes the last hosted zone that is associated with the current account. The NextDNSName element and NextHostedZoneId elements are omitted from the response. 

The NextDNSName and NextHostedZoneId elements in the response contain

the domain name and the hosted zone ID of the next hosted zone that is associated with the current AWS account. If you want to list more hosted zones, make another call to ListHostedZonesByName, and specify the value of NextDNSName and NextHostedZoneId in the dnsname and hostedzoneid parameters, respectively.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListHostedZonesByNameInput{
		DNSName:      aws.String("DNSName"),
		HostedZoneId: aws.String("ResourceId"),
		MaxItems:     aws.String("PageMaxItems"),
	}
	resp, err := svc.ListHostedZonesByName(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListHostedZonesByNameRequest 

func (c *Route53) ListHostedZonesByNameRequest(input *ListHostedZonesByNameInput) (req *request.Request, output *ListHostedZonesByNameOutput)

ListHostedZonesByNameRequest generates a "aws/request.Request" representing the client's request for the ListHostedZonesByName operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHostedZonesByName method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListHostedZonesByNameRequest method.
req, resp := client.ListHostedZonesByNameRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListHostedZonesPages 

func (c *Route53) ListHostedZonesPages(input *ListHostedZonesInput, fn func(p *ListHostedZonesOutput, lastPage bool) (shouldContinue bool)) error

ListHostedZonesPages iterates over the pages of a ListHostedZones operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHostedZones method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a ListHostedZones operation.
pageNum := 0
err := client.ListHostedZonesPages(params,
    func(page *ListHostedZonesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHostedZonesRequest 

func (c *Route53) ListHostedZonesRequest(input *ListHostedZonesInput) (req *request.Request, output *ListHostedZonesOutput)

ListHostedZonesRequest generates a "aws/request.Request" representing the client's request for the ListHostedZones operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListHostedZones method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListHostedZonesRequest method.
req, resp := client.ListHostedZonesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListResourceRecordSets 

func (c *Route53) ListResourceRecordSets(input *ListResourceRecordSetsInput) (*ListResourceRecordSetsOutput, error)
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListResourceRecordSetsInput{
		HostedZoneId:          aws.String("ResourceId"), // Required
		MaxItems:              aws.String("PageMaxItems"),
		StartRecordIdentifier: aws.String("ResourceRecordSetIdentifier"),
		StartRecordName:       aws.String("DNSName"),
		StartRecordType:       aws.String("RRType"),
	}
	resp, err := svc.ListResourceRecordSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListResourceRecordSetsPages 

func (c *Route53) ListResourceRecordSetsPages(input *ListResourceRecordSetsInput, fn func(p *ListResourceRecordSetsOutput, lastPage bool) (shouldContinue bool)) error

ListResourceRecordSetsPages iterates over the pages of a ListResourceRecordSets operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListResourceRecordSets method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a ListResourceRecordSets operation.
pageNum := 0
err := client.ListResourceRecordSetsPages(params,
    func(page *ListResourceRecordSetsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListResourceRecordSetsRequest 

func (c *Route53) ListResourceRecordSetsRequest(input *ListResourceRecordSetsInput) (req *request.Request, output *ListResourceRecordSetsOutput)

ListResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ListResourceRecordSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListResourceRecordSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListResourceRecordSetsRequest method.
req, resp := client.ListResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListReusableDelegationSets 

func (c *Route53) ListReusableDelegationSets(input *ListReusableDelegationSetsInput) (*ListReusableDelegationSetsOutput, error)

To retrieve a list of your reusable delegation sets, send a GET request to the /2013-04-01/delegationset resource. The response to this request includes a DelegationSets element with zero, one, or multiple DelegationSet child elements. By default, the list of delegation sets is displayed on a single page. You can control the length of the page that is displayed by using the MaxItems parameter. You can use the Marker parameter to control the delegation set that the list begins with. 

Amazon Route 53 returns a maximum of 100 items. If you set MaxItems to

a value greater than 100, Amazon Route 53 returns only the first 100.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListReusableDelegationSetsInput{
		Marker:   aws.String("PageMarker"),
		MaxItems: aws.String("PageMaxItems"),
	}
	resp, err := svc.ListReusableDelegationSets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListReusableDelegationSetsRequest 

func (c *Route53) ListReusableDelegationSetsRequest(input *ListReusableDelegationSetsInput) (req *request.Request, output *ListReusableDelegationSetsOutput)

ListReusableDelegationSetsRequest generates a "aws/request.Request" representing the client's request for the ListReusableDelegationSets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListReusableDelegationSets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListReusableDelegationSetsRequest method.
req, resp := client.ListReusableDelegationSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTagsForResource 

func (c *Route53) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTagsForResourceInput{
		ResourceId:   aws.String("TagResourceId"),   // Required
		ResourceType: aws.String("TagResourceType"), // Required
	}
	resp, err := svc.ListTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTagsForResourceRequest 

func (c *Route53) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTagsForResourceRequest method.
req, resp := client.ListTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTagsForResources 

func (c *Route53) ListTagsForResources(input *ListTagsForResourcesInput) (*ListTagsForResourcesOutput, error)
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTagsForResourcesInput{
		ResourceIds: []*string{ // Required
			aws.String("TagResourceId"), // Required
			// More values...
		},
		ResourceType: aws.String("TagResourceType"), // Required
	}
	resp, err := svc.ListTagsForResources(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTagsForResourcesRequest 

func (c *Route53) ListTagsForResourcesRequest(input *ListTagsForResourcesInput) (req *request.Request, output *ListTagsForResourcesOutput)

ListTagsForResourcesRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResources operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForResources method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTagsForResourcesRequest method.
req, resp := client.ListTagsForResourcesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicies added in v1.0.3 

func (c *Route53) ListTrafficPolicies(input *ListTrafficPoliciesInput) (*ListTrafficPoliciesOutput, error)

Gets information about the latest version for every traffic policy that is associated with the current AWS account. Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policies, you can use the maxitems parameter to list them in groups of up to 100.

The response includes three values that help you navigate from one group of maxitems traffic policies to the next: 

IsTruncated

If the value of IsTruncated in the response is true, there are more traffic policies associated with the current AWS account.

If IsTruncated is false, this response includes the last traffic policy that is associated with the current account. 

TrafficPolicyIdMarker

If IsTruncated is true, TrafficPolicyIdMarker is the ID of the first traffic policy in the next group of MaxItems traffic policies. If you want to list more traffic policies, make another call to ListTrafficPolicies, and specify the value of the TrafficPolicyIdMarker element from the response in the TrafficPolicyIdMarker request parameter.

If IsTruncated is false, the TrafficPolicyIdMarker element is omitted from the response. 

MaxItems

The value that you specified for the MaxItems parameter in the request that produced the current response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPoliciesInput{
		MaxItems:              aws.String("PageMaxItems"),
		TrafficPolicyIdMarker: aws.String("TrafficPolicyId"),
	}
	resp, err := svc.ListTrafficPolicies(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTrafficPoliciesRequest added in v1.0.3 

func (c *Route53) ListTrafficPoliciesRequest(input *ListTrafficPoliciesInput) (req *request.Request, output *ListTrafficPoliciesOutput)

ListTrafficPoliciesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicies operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicies method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTrafficPoliciesRequest method.
req, resp := client.ListTrafficPoliciesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstances added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstances(input *ListTrafficPolicyInstancesInput) (*ListTrafficPolicyInstancesOutput, error)

Gets information about the traffic policy instances that you created by using the current AWS account. 

After you submit an UpdateTrafficPolicyInstance request, there's a brief

delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. 

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance

resource.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes five values that help you navigate from one group of MaxItems traffic policy instances to the next: 

IsTruncated

If the value of IsTruncated in the response is true, there are more traffic policy instances associated with the current AWS account.

If IsTruncated is false, this response includes the last traffic policy instance that is associated with the current account. 

MaxItems

The value that you specified for the MaxItems parameter in the request that produced the current response. 

HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker

If IsTruncated is true, these three values in the response represent the first traffic policy instance in the next group of MaxItems traffic policy instances. To list more traffic policy instances, make another call to ListTrafficPolicyInstances, and specify these values in the corresponding request parameters.

If IsTruncated is false, all three elements are omitted from the response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesInput{
		HostedZoneIdMarker:              aws.String("ResourceId"),
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTrafficPolicyInstancesByHostedZone added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstancesByHostedZone(input *ListTrafficPolicyInstancesByHostedZoneInput) (*ListTrafficPolicyInstancesByHostedZoneOutput, error)

Gets information about the traffic policy instances that you created in a specified hosted zone. 

After you submit an UpdateTrafficPolicyInstance request, there's a brief

delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. 

Send a GET request to the /Amazon Route 53 API version/trafficpolicyinstance

resource and include the ID of the hosted zone.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes four values that help you navigate from one group of MaxItems traffic policy instances to the next: 

IsTruncated

If the value of IsTruncated in the response is true, there are more traffic policy instances associated with the current AWS account.

If IsTruncated is false, this response includes the last traffic policy instance that is associated with the current account. 

MaxItems

The value that you specified for the MaxItems parameter in the request that produced the current response. 

TrafficPolicyInstanceNameMarker and TrafficPolicyInstanceTypeMarker

If IsTruncated is true, these two values in the response represent the first traffic policy instance in the next group of MaxItems traffic policy instances. To list more traffic policy instances, make another call to ListTrafficPolicyInstancesByHostedZone, and specify these values in the corresponding request parameters.

If IsTruncated is false, all three elements are omitted from the response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesByHostedZoneInput{
		HostedZoneId:                    aws.String("ResourceId"), // Required
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstancesByHostedZone(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTrafficPolicyInstancesByHostedZoneRequest added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstancesByHostedZoneRequest(input *ListTrafficPolicyInstancesByHostedZoneInput) (req *request.Request, output *ListTrafficPolicyInstancesByHostedZoneOutput)

ListTrafficPolicyInstancesByHostedZoneRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByHostedZone operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstancesByHostedZone method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTrafficPolicyInstancesByHostedZoneRequest method.
req, resp := client.ListTrafficPolicyInstancesByHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstancesByPolicy added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstancesByPolicy(input *ListTrafficPolicyInstancesByPolicyInput) (*ListTrafficPolicyInstancesByPolicyOutput, error)

Gets information about the traffic policy instances that you created by using a specify traffic policy version. 

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance

request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. 

Send a GET request to the /Route 53 API version/trafficpolicyinstance resource

and include the ID and version of the traffic policy.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

The response includes five values that help you navigate from one group of MaxItems traffic policy instances to the next: 

IsTruncated

If the value of IsTruncated in the response is true, there are more traffic policy instances associated with the specified traffic policy.

If IsTruncated is false, this response includes the last traffic policy instance that is associated with the specified traffic policy. 

MaxItems

The value that you specified for the MaxItems parameter in the request that produced the current response. 

HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker

If IsTruncated is true, these values in the response represent the first traffic policy instance in the next group of MaxItems traffic policy instances. To list more traffic policy instances, make another call to ListTrafficPolicyInstancesByPolicy, and specify these values in the corresponding request parameters.

If IsTruncated is false, all three elements are omitted from the response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyInstancesByPolicyInput{
		TrafficPolicyId:                 aws.String("TrafficPolicyId"), // Required
		TrafficPolicyVersion:            aws.Int64(1),                  // Required
		HostedZoneIdMarker:              aws.String("ResourceId"),
		MaxItems:                        aws.String("PageMaxItems"),
		TrafficPolicyInstanceNameMarker: aws.String("DNSName"),
		TrafficPolicyInstanceTypeMarker: aws.String("RRType"),
	}
	resp, err := svc.ListTrafficPolicyInstancesByPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTrafficPolicyInstancesByPolicyRequest added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstancesByPolicyRequest(input *ListTrafficPolicyInstancesByPolicyInput) (req *request.Request, output *ListTrafficPolicyInstancesByPolicyOutput)

ListTrafficPolicyInstancesByPolicyRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstancesByPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTrafficPolicyInstancesByPolicyRequest method.
req, resp := client.ListTrafficPolicyInstancesByPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyInstancesRequest added in v1.0.3 

func (c *Route53) ListTrafficPolicyInstancesRequest(input *ListTrafficPolicyInstancesInput) (req *request.Request, output *ListTrafficPolicyInstancesOutput)

ListTrafficPolicyInstancesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTrafficPolicyInstancesRequest method.
req, resp := client.ListTrafficPolicyInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) ListTrafficPolicyVersions added in v1.0.3 

func (c *Route53) ListTrafficPolicyVersions(input *ListTrafficPolicyVersionsInput) (*ListTrafficPolicyVersionsOutput, error)

Gets information about all of the versions for a specified traffic policy.

Send a GET request to the /Amazon Route 53 API version/trafficpolicy resource and specify the ID of the traffic policy for which you want to list versions.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policies, you can use the maxitems parameter to list them in groups of up to 100.

The response includes three values that help you navigate from one group of maxitemsmaxitems traffic policies to the next: 

IsTruncated

If the value of IsTruncated in the response is true, there are more traffic policy versions associated with the specified traffic policy.

If IsTruncated is false, this response includes the last traffic policy version that is associated with the specified traffic policy. 

TrafficPolicyVersionMarker

The ID of the next traffic policy version that is associated with the current AWS account. If you want to list more traffic policies, make another call to ListTrafficPolicyVersions, and specify the value of the TrafficPolicyVersionMarker element in the TrafficPolicyVersionMarker request parameter.

If IsTruncated is false, Amazon Route 53 omits the TrafficPolicyVersionMarker element from the response. 

MaxItems

The value that you specified for the MaxItems parameter in the request that produced the current response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.ListTrafficPolicyVersionsInput{
		Id:                         aws.String("TrafficPolicyId"), // Required
		MaxItems:                   aws.String("PageMaxItems"),
		TrafficPolicyVersionMarker: aws.String("TrafficPolicyVersionMarker"),
	}
	resp, err := svc.ListTrafficPolicyVersions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) ListTrafficPolicyVersionsRequest added in v1.0.3 

func (c *Route53) ListTrafficPolicyVersionsRequest(input *ListTrafficPolicyVersionsInput) (req *request.Request, output *ListTrafficPolicyVersionsOutput)

ListTrafficPolicyVersionsRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyVersions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTrafficPolicyVersions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ListTrafficPolicyVersionsRequest method.
req, resp := client.ListTrafficPolicyVersionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) TestDNSAnswer added in v1.4.5 

func (c *Route53) TestDNSAnswer(input *TestDNSAnswerInput) (*TestDNSAnswerOutput, error)
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.TestDNSAnswerInput{
		HostedZoneId:          aws.String("ResourceId"), // Required
		RecordName:            aws.String("DNSName"),    // Required
		RecordType:            aws.String("RRType"),     // Required
		EDNS0ClientSubnetIP:   aws.String("IPAddress"),
		EDNS0ClientSubnetMask: aws.String("SubnetMask"),
		ResolverIP:            aws.String("IPAddress"),
	}
	resp, err := svc.TestDNSAnswer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) TestDNSAnswerRequest added in v1.4.5 

func (c *Route53) TestDNSAnswerRequest(input *TestDNSAnswerInput) (req *request.Request, output *TestDNSAnswerOutput)

TestDNSAnswerRequest generates a "aws/request.Request" representing the client's request for the TestDNSAnswer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TestDNSAnswer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the TestDNSAnswerRequest method.
req, resp := client.TestDNSAnswerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateHealthCheck 

func (c *Route53) UpdateHealthCheck(input *UpdateHealthCheckInput) (*UpdateHealthCheckOutput, error)

Updates an existing health check.

Send a POST request to the /Amazon Route 53 API version/healthcheck/health check ID resource. The request body must include an XML document with an UpdateHealthCheckRequest element. For more information about updating health checks, see Creating, Updating, and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html) in the Amazon Route 53 Developer Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateHealthCheckInput{
		HealthCheckId: aws.String("HealthCheckId"), // Required
		AlarmIdentifier: &route53.AlarmIdentifier{
			Name:   aws.String("AlarmName"),        // Required
			Region: aws.String("CloudWatchRegion"), // Required
		},
		ChildHealthChecks: []*string{
			aws.String("HealthCheckId"), // Required
			// More values...
		},
		EnableSNI:                    aws.Bool(true),
		FailureThreshold:             aws.Int64(1),
		FullyQualifiedDomainName:     aws.String("FullyQualifiedDomainName"),
		HealthCheckVersion:           aws.Int64(1),
		HealthThreshold:              aws.Int64(1),
		IPAddress:                    aws.String("IPAddress"),
		InsufficientDataHealthStatus: aws.String("InsufficientDataHealthStatus"),
		Inverted:                     aws.Bool(true),
		Port:                         aws.Int64(1),
		Regions: []*string{
			aws.String("HealthCheckRegion"), // Required
			// More values...
		},
		ResourcePath: aws.String("ResourcePath"),
		SearchString: aws.String("SearchString"),
	}
	resp, err := svc.UpdateHealthCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) UpdateHealthCheckRequest 

func (c *Route53) UpdateHealthCheckRequest(input *UpdateHealthCheckInput) (req *request.Request, output *UpdateHealthCheckOutput)

UpdateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the UpdateHealthCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateHealthCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateHealthCheckRequest method.
req, resp := client.UpdateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateHostedZoneComment 

func (c *Route53) UpdateHostedZoneComment(input *UpdateHostedZoneCommentInput) (*UpdateHostedZoneCommentOutput, error)

Updates the hosted zone comment. Send a POST request to the /2013-04-01/hostedzone/hosted zone ID resource.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateHostedZoneCommentInput{
		Id:      aws.String("ResourceId"), // Required
		Comment: aws.String("ResourceDescription"),
	}
	resp, err := svc.UpdateHostedZoneComment(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) UpdateHostedZoneCommentRequest 

func (c *Route53) UpdateHostedZoneCommentRequest(input *UpdateHostedZoneCommentInput) (req *request.Request, output *UpdateHostedZoneCommentOutput)

UpdateHostedZoneCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateHostedZoneComment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateHostedZoneComment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateHostedZoneCommentRequest method.
req, resp := client.UpdateHostedZoneCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateTrafficPolicyComment added in v1.0.3 

func (c *Route53) UpdateTrafficPolicyComment(input *UpdateTrafficPolicyCommentInput) (*UpdateTrafficPolicyCommentOutput, error)

Updates the comment for a specified traffic policy version.

Send a POST request to the /Amazon Route 53 API version/trafficpolicy/ resource.

The request body must include a document with an UpdateTrafficPolicyCommentRequest element.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateTrafficPolicyCommentInput{
		Comment: aws.String("TrafficPolicyComment"), // Required
		Id:      aws.String("TrafficPolicyId"),      // Required
		Version: aws.Int64(1),                       // Required
	}
	resp, err := svc.UpdateTrafficPolicyComment(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) UpdateTrafficPolicyCommentRequest added in v1.0.3 

func (c *Route53) UpdateTrafficPolicyCommentRequest(input *UpdateTrafficPolicyCommentInput) (req *request.Request, output *UpdateTrafficPolicyCommentOutput)

UpdateTrafficPolicyCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyComment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateTrafficPolicyComment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateTrafficPolicyCommentRequest method.
req, resp := client.UpdateTrafficPolicyCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) UpdateTrafficPolicyInstance added in v1.0.3 

func (c *Route53) UpdateTrafficPolicyInstance(input *UpdateTrafficPolicyInstanceInput) (*UpdateTrafficPolicyInstanceOutput, error)

Updates the resource record sets in a specified hosted zone that were created based on the settings in a specified traffic policy version.

Send a POST request to the /Amazon Route 53 API version/trafficpolicyinstance/traffic policy ID resource. The request body must include a document with an UpdateTrafficPolicyInstanceRequest element.

When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root resource record set name (such as example.com) while it replaces one group of resource record sets with another. Amazon Route 53 performs the following operations: 

Amazon Route 53 creates a new group of resource record sets based on the

specified traffic policy. This is true regardless of how substantial the differences are between the existing resource record sets and the new resource record sets. 

When all of the new resource record sets have been created, Amazon Route

53 starts to respond to DNS queries for the root resource record set name (such as example.com) by using the new resource record sets. 

Amazon Route 53 deletes the old group of resource record sets that are

associated with the root resource record set name.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := route53.New(sess)

	params := &route53.UpdateTrafficPolicyInstanceInput{
		Id:                   aws.String("TrafficPolicyInstanceId"), // Required
		TTL:                  aws.Int64(1),                          // Required
		TrafficPolicyId:      aws.String("TrafficPolicyId"),         // Required
		TrafficPolicyVersion: aws.Int64(1),                          // Required
	}
	resp, err := svc.UpdateTrafficPolicyInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*Route53) UpdateTrafficPolicyInstanceRequest added in v1.0.3 

func (c *Route53) UpdateTrafficPolicyInstanceRequest(input *UpdateTrafficPolicyInstanceInput) (req *request.Request, output *UpdateTrafficPolicyInstanceOutput)

UpdateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateTrafficPolicyInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UpdateTrafficPolicyInstanceRequest method.
req, resp := client.UpdateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*Route53) WaitUntilResourceRecordSetsChanged added in v1.1.15 

func (c *Route53) WaitUntilResourceRecordSetsChanged(input *GetChangeInput) error

type StatusReport 

type StatusReport struct {

	// The time at which the health checker performed the health check in ISO 8601
	// format (https://en.wikipedia.org/wiki/ISO_8601) and Coordinated Universal
	// Time (UTC). For example, the value 2014-10-27T17:48:16.751Z represents October
	// 27, 2014 at 17:48:16.751 UTC.
	CheckedTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// A description of the status of the health check endpoint as reported by one
	// of the Amazon Route 53 health checkers.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the status that one Amazon Route 53 health checker reports and the time of the health check.

func (StatusReport) GoString added in v0.6.5 

func (s StatusReport) GoString() string

GoString returns the string representation

func (StatusReport) String added in v0.6.5 

func (s StatusReport) String() string

String returns the string representation

type Tag 

type Tag struct {

	// The value of Key depends on the operation that you want to perform:
	//
	//    Add a tag to a health check or hosted zone: Key is the name that you
	// want to give the new tag.
	//
	//    Edit a tag: Key is the name of the tag whose Value element you want to
	// remove.
	//
	//     Delete a key: Key is the name of the tag you want to remove.
	//
	//    Give a name to a health check: Edit the default Name tag. In the Amazon
	// Route 53 console, the list of your health checks includes a Name column that
	// lets you see the name that you've given to each health check.
	Key *string `type:"string"`

	// The value of Value depends on the operation that you want to perform:
	//
	//    Add a tag to a health check or hosted zone: Value is the value that you
	// want to give the new tag.
	//
	//    Edit a tag: Value is the new value that you want to assign the tag.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a tag that you want to add or edit for the specified health check or hosted zone.

func (Tag) GoString added in v0.6.5 

func (s Tag) GoString() string

GoString returns the string representation

func (Tag) String added in v0.6.5 

func (s Tag) String() string

String returns the string representation

type TestDNSAnswerInput added in v1.4.5 

type TestDNSAnswerInput struct {
	EDNS0ClientSubnetIP *string `location:"querystring" locationName:"edns0clientsubnetip" type:"string"`

	EDNS0ClientSubnetMask *string `location:"querystring" locationName:"edns0clientsubnetmask" type:"string"`

	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string" required:"true"`

	RecordName *string `location:"querystring" locationName:"recordname" type:"string" required:"true"`

	RecordType *string `location:"querystring" locationName:"recordtype" type:"string" required:"true" enum:"RRType"`

	ResolverIP *string `location:"querystring" locationName:"resolverip" type:"string"`
	// contains filtered or unexported fields
}

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask. 

Parameters

hostedzoneid  The ID of the hosted zone that you want Amazon Route 53 to

simulate a query for. 

recordname  The name of the resource record set that you want Amazon Route

53 to simulate a query for. 

recordtype  The type of the resource record set.

resolverip (optional)  If you want to simulate a request from a specific

DNS resolver, specify the IP address for that resolver. If you omit this value, TestDNSAnswer uses the IP address of a DNS resolver in the AWS US East region. 

edns0clientsubnetip (optional)  If the resolver that you specified for

resolverip supports EDNS0, specify the IP address of a client in the applicable location. 

edns0clientsubnetmask (optional)  If you specify an IP address for edns0clientsubnetip,

you can optionally specify the number of bits of the IP address that you want the checking tool to include in the DNS query. For example, if you specify 192.0.2.44 for edns0clientsubnetip and 24 for edns0clientsubnetmask, the checking tool will simulate a request from 192.0.2.0/24. The default value is 24 bits.

func (TestDNSAnswerInput) GoString added in v1.4.5 

func (s TestDNSAnswerInput) GoString() string

GoString returns the string representation

func (TestDNSAnswerInput) String added in v1.4.5 

func (s TestDNSAnswerInput) String() string

String returns the string representation

func (*TestDNSAnswerInput) Validate added in v1.4.5 

func (s *TestDNSAnswerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TestDNSAnswerOutput added in v1.4.5 

type TestDNSAnswerOutput struct {

	// The Amazon Route 53 name server used to respond to the request.
	Nameserver *string `type:"string" required:"true"`

	// The protocol that Amazon Route 53 used to respond to the request, either
	// UDP or TCP.
	Protocol *string `type:"string" required:"true"`

	// A list that contains values that Amazon Route 53 returned for this resource
	// record set.
	RecordData []*string `locationNameList:"RecordDataEntry" type:"list" required:"true"`

	// The name of the resource record set that you submitted a request for.
	RecordName *string `type:"string" required:"true"`

	// The type of the resource record set that you submitted a request for.
	RecordType *string `type:"string" required:"true" enum:"RRType"`

	// A code that indicates whether the request is valid or not. The most common
	// response code is NOERROR, meaning that the request is valid. If the response
	// is not valid, Amazon Route 53 returns a response code that describes the
	// error. For a list of possible response codes, see DNS RCODES (http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6)
	// on the IANA website.
	ResponseCode *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a TestDNSAnswer request.

func (TestDNSAnswerOutput) GoString added in v1.4.5 

func (s TestDNSAnswerOutput) GoString() string

GoString returns the string representation

func (TestDNSAnswerOutput) String added in v1.4.5 

func (s TestDNSAnswerOutput) String() string

String returns the string representation

type TrafficPolicy added in v1.0.3 

type TrafficPolicy struct {
	Comment *string `type:"string"`

	Document *string `type:"string" required:"true"`

	Id *string `type:"string" required:"true"`

	Name *string `type:"string" required:"true"`

	Type *string `type:"string" required:"true" enum:"RRType"`

	Version *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

func (TrafficPolicy) GoString added in v1.0.3 

func (s TrafficPolicy) GoString() string

GoString returns the string representation

func (TrafficPolicy) String added in v1.0.3 

func (s TrafficPolicy) String() string

String returns the string representation

type TrafficPolicyInstance added in v1.0.3 

type TrafficPolicyInstance struct {
	HostedZoneId *string `type:"string" required:"true"`

	Id *string `type:"string" required:"true"`

	Message *string `type:"string" required:"true"`

	Name *string `type:"string" required:"true"`

	State *string `type:"string" required:"true"`

	TTL *int64 `type:"long" required:"true"`

	TrafficPolicyId *string `type:"string" required:"true"`

	TrafficPolicyType *string `type:"string" required:"true" enum:"RRType"`

	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

func (TrafficPolicyInstance) GoString added in v1.0.3 

func (s TrafficPolicyInstance) GoString() string

GoString returns the string representation

func (TrafficPolicyInstance) String added in v1.0.3 

func (s TrafficPolicyInstance) String() string

String returns the string representation

type TrafficPolicySummary added in v1.0.3 

type TrafficPolicySummary struct {
	Id *string `type:"string" required:"true"`

	LatestVersion *int64 `min:"1" type:"integer" required:"true"`

	Name *string `type:"string" required:"true"`

	TrafficPolicyCount *int64 `min:"1" type:"integer" required:"true"`

	Type *string `type:"string" required:"true" enum:"RRType"`
	// contains filtered or unexported fields
}

func (TrafficPolicySummary) GoString added in v1.0.3 

func (s TrafficPolicySummary) GoString() string

GoString returns the string representation

func (TrafficPolicySummary) String added in v1.0.3 

func (s TrafficPolicySummary) String() string

String returns the string representation

type UpdateHealthCheckInput 

type UpdateHealthCheckInput struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// A complex type that contains one ChildHealthCheck element for each health
	// check that you want to associate with a CALCULATED health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the
	// client_hello message. If you don't enable SNI, the status of the health check
	// will be SSL alert handshake_failure. A health check can also have that status
	// for other reasons. If SNI is enabled and you're still getting the error,
	// check the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	//  If a health check already has a value for IPAddress, you can change the
	// value. However, you can't update an existing health check to add or remove
	// the value of IPAddress.
	//
	//   If you specify IPAddress:
	//
	// The value that you want Amazon Route 53 to pass in the Host header in all
	// health checks except TCP health checks. This is typically the fully qualified
	// DNS name of the endpoint on which you want Amazon Route 53 to perform health
	// checks. When Amazon Route 53 checks the health of an endpoint, here is how
	// it constructs the Host header:
	//
	//   If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for Type,
	// Amazon Route 53 passes the value of FullyQualifiedDomainName to the endpoint
	// in the Host header.
	//
	//   If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH for
	// Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to the
	// endpoint in the Host header.
	//
	//   If you specify another value for Port and any value except TCP for Type,
	// Amazon Route 53 passes  FullyQualifiedDomainName:Port  to the endpoint in
	// the Host header.
	//
	//   If you don't specify a value for FullyQualifiedDomainName, Amazon Route
	// 53 substitutes the value of IPAddress in the Host header in each of the above
	// cases.
	//
	//  If you don't specify IPAddress:
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 sends a DNS
	// request to the domain that you specify in FullyQualifiedDomainName at the
	// interval you specify in RequestInterval. Using an IP address that DNS returns,
	// Amazon Route 53 then checks the health of the endpoint.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-1-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	//  In this configuration, if the value of FullyQualifiedDomainName matches
	// the name of the resource record sets and you then associate the health check
	// with those resource record sets, health check results will be unpredictable.
	//
	//  In addition, if the value of Type is HTTP, HTTPS, HTTP_STR_MATCH, or HTTPS_STR_MATCH,
	// Amazon Route 53 passes the value of FullyQualifiedDomainName in the Host
	// header, as it does when you specify a value for IPAddress. If the value of
	// Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The ID for the health check for which you want detailed information. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`

	// A sequential counter that Amazon Route 53 sets to 1 when you create a health
	// check and increments by 1 each time you update settings for the health check.
	//
	// We recommend that you use GetHealthCheck or ListHealthChecks to get the
	// current value of HealthCheckVersion for the health check that you want to
	// update, and that you include that value in your UpdateHealthCheck request.
	// This prevents Amazon Route 53 from overwriting an intervening update:
	//
	//   f the value in the UpdateHealthCheck request matches the value of HealthCheckVersion
	// in the health check, Amazon Route 53 updates the health check with the new
	// settings.
	//
	//   If the value of HealthCheckVersion in the health check is greater, the
	// health check was changed after you got the version number. Amazon Route 53
	// does not update the health check, and it returns a HealthCheckVersionMismatch
	// error.
	HealthCheckVersion *int64 `min:"1" type:"long"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the ChildHealthChecks and
	// ChildHealthCheck elements.
	//
	// Note the following:
	//
	//   If you specify a number greater than the number of child health checks,
	// Amazon Route 53 always considers this health check to be unhealthy.
	//
	//   If you specify 0, Amazon Route 53 always considers this health check to
	// be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 IP address of the endpoint on which you want Amazon Route 53 to
	// perform health checks. If you don't specify a value for IPAddress, Amazon
	// Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval you specify in RequestInterval.
	// Using an IP address that DNS returns, Amazon Route 53 then checks the health
	// of the endpoint.
	//
	// f the endpoint is an Amazon EC2 instance, we recommend that you create an
	// Elastic IP address, associate it with your Amazon EC2 instance, and specify
	// the Elastic IP address for IPAddress. This ensures that the IP address of
	// your instance never changes. For more information, see Elastic IP Addresses
	// (EIP) (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html)
	// in the Amazon EC2 User Guide for Linux Instances.
	//
	//  If a health check already has a value for IPAddress, you can change the
	// value. However, you can't update an existing health check to add or remove
	// the value of IPAddress.
	//
	//  For more information, see UpdateHealthCheckRequest$FullyQualifiedDomainName.
	IPAddress *string `type:"string"`

	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region from which
	// you want Amazon Route 53 health checkers to check the specified endpoint.
	Regions []*string `locationNameList:"Region" min:"1" type:"list"`

	// The path that you want Amazon Route 53 to request when performing health
	// checks. The path can be any value for which your endpoint will return an
	// HTTP status code of 2xx or 3xx when the endpoint is healthy, for example
	// the file /docs/route53-health-check.html.
	//
	// Specify this value only if you want to change it.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy. (You can't change the value of Type when you update
	// a health check.)
	SearchString *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the health check request information.

func (UpdateHealthCheckInput) GoString added in v0.6.5 

func (s UpdateHealthCheckInput) GoString() string

GoString returns the string representation

func (UpdateHealthCheckInput) String added in v0.6.5 

func (s UpdateHealthCheckInput) String() string

String returns the string representation

func (*UpdateHealthCheckInput) Validate added in v1.1.21 

func (s *UpdateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHealthCheckOutput 

type UpdateHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

func (UpdateHealthCheckOutput) GoString added in v0.6.5 

func (s UpdateHealthCheckOutput) GoString() string

GoString returns the string representation

func (UpdateHealthCheckOutput) String added in v0.6.5 

func (s UpdateHealthCheckOutput) String() string

String returns the string representation

type UpdateHostedZoneCommentInput 

type UpdateHostedZoneCommentInput struct {

	// The new comment for the hosted zone. If you don't specify a value for Comment,
	// Amazon Route 53 deletes the existing value of the Comment element, if any.
	Comment *string `type:"string"`

	// The ID for the hosted zone for which you want to update the comment.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the hosted zone request information.

func (UpdateHostedZoneCommentInput) GoString added in v0.6.5 

func (s UpdateHostedZoneCommentInput) GoString() string

GoString returns the string representation

func (UpdateHostedZoneCommentInput) String added in v0.6.5 

func (s UpdateHostedZoneCommentInput) String() string

String returns the string representation

func (*UpdateHostedZoneCommentInput) Validate added in v1.1.21 

func (s *UpdateHostedZoneCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHostedZoneCommentOutput 

type UpdateHostedZoneCommentOutput struct {

	// A complex type that contains general information about the hosted zone.
	HostedZone *HostedZone `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the UpdateHostedZoneCommentRequest.

func (UpdateHostedZoneCommentOutput) GoString added in v0.6.5 

func (s UpdateHostedZoneCommentOutput) GoString() string

GoString returns the string representation

func (UpdateHostedZoneCommentOutput) String added in v0.6.5 

func (s UpdateHostedZoneCommentOutput) String() string

String returns the string representation

type UpdateTrafficPolicyCommentInput added in v1.0.3 

type UpdateTrafficPolicyCommentInput struct {

	// The new comment for the specified traffic policy and version.
	Comment *string `type:"string" required:"true"`

	// The value of Id for the traffic policy for which you want to update the comment.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The value of Version for the traffic policy for which you want to update
	// the comment.
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy for which you want to update the comment.

func (UpdateTrafficPolicyCommentInput) GoString added in v1.0.3 

func (s UpdateTrafficPolicyCommentInput) GoString() string

GoString returns the string representation

func (UpdateTrafficPolicyCommentInput) String added in v1.0.3 

func (s UpdateTrafficPolicyCommentInput) String() string

String returns the string representation

func (*UpdateTrafficPolicyCommentInput) Validate added in v1.1.21 

func (s *UpdateTrafficPolicyCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyCommentOutput added in v1.0.3 

type UpdateTrafficPolicyCommentOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the traffic policy.

func (UpdateTrafficPolicyCommentOutput) GoString added in v1.0.3 

func (s UpdateTrafficPolicyCommentOutput) GoString() string

GoString returns the string representation

func (UpdateTrafficPolicyCommentOutput) String added in v1.0.3 

func (s UpdateTrafficPolicyCommentOutput) String() string

String returns the string representation

type UpdateTrafficPolicyInstanceInput added in v1.0.3 

type UpdateTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to update.
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// The TTL that you want Amazon Route 53 to assign to all of the updated resource
	// record sets.
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want Amazon Route 53 to use to update
	// resource record sets for the specified traffic policy instance.
	TrafficPolicyId *string `type:"string" required:"true"`

	// The version of the traffic policy that you want Amazon Route 53 to use to
	// update resource record sets for the specified traffic policy instance.
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to update based on a specified traffic policy instance.

func (UpdateTrafficPolicyInstanceInput) GoString added in v1.0.3 

func (s UpdateTrafficPolicyInstanceInput) GoString() string

GoString returns the string representation

func (UpdateTrafficPolicyInstanceInput) String added in v1.0.3 

func (s UpdateTrafficPolicyInstanceInput) String() string

String returns the string representation

func (*UpdateTrafficPolicyInstanceInput) Validate added in v1.1.21 

func (s *UpdateTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyInstanceOutput added in v1.0.3 

type UpdateTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the updated traffic policy instance.
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

func (UpdateTrafficPolicyInstanceOutput) GoString added in v1.0.3 

func (s UpdateTrafficPolicyInstanceOutput) GoString() string

GoString returns the string representation

func (UpdateTrafficPolicyInstanceOutput) String added in v1.0.3 

func (s UpdateTrafficPolicyInstanceOutput) String() string

String returns the string representation

type VPC 

type VPC struct {

	// A VPC ID
	VPCId *string `type:"string"`

	VPCRegion *string `min:"1" type:"string" enum:"VPCRegion"`
	// contains filtered or unexported fields
}

func (VPC) GoString added in v0.6.5 

func (s VPC) GoString() string

GoString returns the string representation

func (VPC) String added in v0.6.5 

func (s VPC) String() string

String returns the string representation

func (*VPC) Validate added in v1.1.21 

func (s *VPC) Validate() error

Validate inspects the fields of the type to determine if they are valid.

Source Files

View all Source files

Directories

Path Synopsis
Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.
 Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.