configgrpc

README

gRPC Configuration Settings

gRPC exposes a variety of settings. Several of these settings are available for configuration within individual receivers or exporters. In general, none of these settings should need to be adjusted.

Client Configuration

Exporters leverage client configuration.

Note that client configuration supports TLS configuration, the configuration parameters are also defined under tls like server configuration. For more information, see configtls README.

• balancer_name
• compression Compression type to use among gzip, snappy, zstd, and none.
• endpoint: Valid value syntax available here
• tls
• headers: name/value pairs added to the request
• keepalive
  • permit_without_stream
  • time
  • timeout
• read_buffer_size
• write_buffer_size

Please note that per_rpc_auth which allows the credentials to send for every RPC is now moved to become an extension. Note that this feature isn't about sending the headers only during the initial connection as an authorization header under the headers would do: this is sent for every RPC performed during an established connection.

Example:

exporters:
  otlp:
    endpoint: otelcol2:55690
    tls:
      ca_file: ca.pem
      cert_file: cert.pem
      key_file: key.pem
    headers:
      test1: "value1"
      "test 2": "value 2"

Compression Comparison

configgrpc_benchmark_test.go contains benchmarks comparing the supported compression algorithms. It performs compression using gzip, zstd, and snappy compression on small, medium, and large sized log, trace, and metric payloads. Each test case outputs the uncompressed payload size, the compressed payload size, and the average nanoseconds spent on compression.

The following table summarizes the results, including some additional columns computed from the raw data. The benchmarks were performed on an AWS m5.large EC2 instance with an Intel(R) Xeon(R) Platinum 8259CL CPU @ 2.50GHz.

Request	Compressor	Raw Bytes	Compressed bytes	Compression ratio	Ns / op	Mb compressed / second	Mb saved / second
lg_log_request	gzip	5150	262	19.66	49231	104.61	99.29
lg_metric_request	gzip	6800	201	33.83	51816	131.23	127.35
lg_trace_request	gzip	9200	270	34.07	65174	141.16	137.02
md_log_request	gzip	363	268	1.35	37609	9.65	2.53
md_metric_request	gzip	320	145	2.21	30141	10.62	5.81
md_trace_request	gzip	451	288	1.57	38270	11.78	4.26
sm_log_request	gzip	166	168	0.99	30511	5.44	-0.07
sm_metric_request	gzip	185	142	1.30	29055	6.37	1.48
sm_trace_request	gzip	233	205	1.14	33466	6.96	0.84
lg_log_request	snappy	5150	475	10.84	1915	2,689.30	2,441.25
lg_metric_request	snappy	6800	466	14.59	2266	3,000.88	2,795.23
lg_trace_request	snappy	9200	644	14.29	3281	2,804.02	2,607.74
md_log_request	snappy	363	300	1.21	770.0	471.43	81.82
md_metric_request	snappy	320	162	1.98	588.6	543.66	268.43
md_trace_request	snappy	451	330	1.37	907.7	496.86	133.30
sm_log_request	snappy	166	184	0.90	551.8	300.83	-32.62
sm_metric_request	snappy	185	154	1.20	526.3	351.51	58.90
sm_trace_request	snappy	233	251	0.93	682.1	341.59	-26.39
lg_log_request	zstd	5150	223	23.09	17998	286.14	273.75
lg_metric_request	zstd	6800	144	47.22	14289	475.89	465.81
lg_trace_request	zstd	9200	208	44.23	17160	536.13	524.01
md_log_request	zstd	363	261	1.39	11216	32.36	9.09
md_metric_request	zstd	320	145	2.21	9318	34.34	18.78
md_trace_request	zstd	451	301	1.50	12583	35.84	11.92
sm_log_request	zstd	166	165	1.01	12482	13.30	0.08
sm_metric_request	zstd	185	139	1.33	8824	20.97	5.21
sm_trace_request	zstd	233	203	1.15	10134	22.99	2.96

Compression ratios will vary in practice as they are highly dependent on the data's information entropy. Compression rates are dependent on the speed of the CPU, and the size of payloads being compressed: smaller payloads compress at slower rates relative to larger payloads, which are able to amortize fixed computation costs over more bytes.

gzip is the only required compression algorithm required for OTLP servers, and is a natural first choice. It is not as fast as snappy, but achieves better compression ratios and has reasonable performance. If your collector is CPU bound and your OTLP server supports it, you may benefit from using snappy compression. If your collector is CPU bound and has a very fast network link, you may benefit from disabling compression, which is the default.

Server Configuration

Receivers leverage server configuration.

Note that transport configuration can also be configured. For more information, see confignet README.

• keepalive
  • enforcement_policy
    • min_time
    • permit_without_stream
  • server_parameters
    • max_connection_age
    • max_connection_age_grace
    • max_connection_idle
    • time
    • timeout
• max_concurrent_streams
• max_recv_msg_size_mib
• read_buffer_size
• tls
• write_buffer_size

Documentation

Overview

Package configgrpc defines the configuration settings to create a gRPC client and server.

Index

• type GRPCClientSettings
  • func (gcs *GRPCClientSettings) SanitizedEndpoint() string
  • func (gcs *GRPCClientSettings) ToClientConn(ctx context.Context, host component.Host, settings component.TelemetrySettings, ...) (*grpc.ClientConn, error)
• type GRPCServerSettings
  • func (gss *GRPCServerSettings) ToListener() (net.Listener, error)
  • func (gss *GRPCServerSettings) ToServer(host component.Host, settings component.TelemetrySettings, ...) (*grpc.Server, error)
• type KeepaliveClientConfig
• type KeepaliveEnforcementPolicy
• type KeepaliveServerConfig
• type KeepaliveServerParameters

Types

type GRPCClientSettings

type GRPCClientSettings struct {
	// The target to which the exporter is going to send traces or metrics,
	// using the gRPC protocol. The valid syntax is described at
	// https://github.com/grpc/grpc/blob/master/doc/naming.md.
	Endpoint string `mapstructure:"endpoint"`

	// The compression key for supported compression types within collector.
	Compression configcompression.CompressionType `mapstructure:"compression"`

	// TLSSetting struct exposes TLS client configuration.
	TLSSetting configtls.TLSClientSetting `mapstructure:"tls"`

	// The keepalive parameters for gRPC client. See grpc.WithKeepaliveParams.
	// (https://godoc.org/google.golang.org/grpc#WithKeepaliveParams).
	Keepalive *KeepaliveClientConfig `mapstructure:"keepalive"`

	// ReadBufferSize for gRPC client. See grpc.WithReadBufferSize.
	// (https://godoc.org/google.golang.org/grpc#WithReadBufferSize).
	ReadBufferSize int `mapstructure:"read_buffer_size"`

	// WriteBufferSize for gRPC gRPC. See grpc.WithWriteBufferSize.
	// (https://godoc.org/google.golang.org/grpc#WithWriteBufferSize).
	WriteBufferSize int `mapstructure:"write_buffer_size"`

	// WaitForReady parameter configures client to wait for ready state before sending data.
	// (https://github.com/grpc/grpc/blob/master/doc/wait-for-ready.md)
	WaitForReady bool `mapstructure:"wait_for_ready"`

	// The headers associated with gRPC requests.
	Headers map[string]configopaque.String `mapstructure:"headers"`

	// Sets the balancer in grpclb_policy to discover the servers. Default is pick_first.
	// https://github.com/grpc/grpc-go/blob/master/examples/features/load_balancing/README.md
	BalancerName string `mapstructure:"balancer_name"`

	// Auth configuration for outgoing RPCs.
	Auth *configauth.Authentication `mapstructure:"auth"`
}

GRPCClientSettings defines common settings for a gRPC client configuration.

func (*GRPCClientSettings) SanitizedEndpoint

func (gcs *GRPCClientSettings) SanitizedEndpoint() string

SanitizedEndpoint strips the prefix of either http:// or https:// from configgrpc.GRPCClientSettings.Endpoint.

func (*GRPCClientSettings) ToClientConn

func (gcs *GRPCClientSettings) ToClientConn(ctx context.Context, host component.Host, settings component.TelemetrySettings, extraOpts ...grpc.DialOption) (*grpc.ClientConn, error)

ToClientConn creates a client connection to the given target. By default, it's a non-blocking dial (the function won't wait for connections to be established, and connecting happens in the background). To make it a blocking dial, use grpc.WithBlock() dial option.

type GRPCServerSettings

type GRPCServerSettings struct {
	// Server net.Addr config. For transport only "tcp" and "unix" are valid options.
	NetAddr confignet.NetAddr `mapstructure:",squash"`

	// Configures the protocol to use TLS.
	// The default value is nil, which will cause the protocol to not use TLS.
	TLSSetting *configtls.TLSServerSetting `mapstructure:"tls"`

	// MaxRecvMsgSizeMiB sets the maximum size (in MiB) of messages accepted by the server.
	MaxRecvMsgSizeMiB uint64 `mapstructure:"max_recv_msg_size_mib"`

	// MaxConcurrentStreams sets the limit on the number of concurrent streams to each ServerTransport.
	// It has effect only for streaming RPCs.
	MaxConcurrentStreams uint32 `mapstructure:"max_concurrent_streams"`

	// ReadBufferSize for gRPC server. See grpc.ReadBufferSize.
	// (https://godoc.org/google.golang.org/grpc#ReadBufferSize).
	ReadBufferSize int `mapstructure:"read_buffer_size"`

	// WriteBufferSize for gRPC server. See grpc.WriteBufferSize.
	// (https://godoc.org/google.golang.org/grpc#WriteBufferSize).
	WriteBufferSize int `mapstructure:"write_buffer_size"`

	// Keepalive anchor for all the settings related to keepalive.
	Keepalive *KeepaliveServerConfig `mapstructure:"keepalive"`

	// Auth for this receiver
	Auth *configauth.Authentication `mapstructure:"auth"`

	// Include propagates the incoming connection's metadata to downstream consumers.
	// Experimental: *NOTE* this option is subject to change or removal in the future.
	IncludeMetadata bool `mapstructure:"include_metadata"`
}

GRPCServerSettings defines common settings for a gRPC server configuration.

func (*GRPCServerSettings) ToListener

func (gss *GRPCServerSettings) ToListener() (net.Listener, error)

ToListener returns the net.Listener constructed from the settings.

func (*GRPCServerSettings) ToServer

func (gss *GRPCServerSettings) ToServer(host component.Host, settings component.TelemetrySettings, extraOpts ...grpc.ServerOption) (*grpc.Server, error)

type KeepaliveClientConfig

type KeepaliveClientConfig struct {
	Time                time.Duration `mapstructure:"time"`
	Timeout             time.Duration `mapstructure:"timeout"`
	PermitWithoutStream bool          `mapstructure:"permit_without_stream"`
}

KeepaliveClientConfig exposes the keepalive.ClientParameters to be used by the exporter. Refer to the original data-structure for the meaning of each parameter: https://godoc.org/google.golang.org/grpc/keepalive#ClientParameters

type KeepaliveEnforcementPolicy

type KeepaliveEnforcementPolicy struct {
	MinTime             time.Duration `mapstructure:"min_time"`
	PermitWithoutStream bool          `mapstructure:"permit_without_stream"`
}

KeepaliveEnforcementPolicy allow configuration of the keepalive.EnforcementPolicy. The same default values as keepalive.EnforcementPolicy are applicable and get applied by the server. See https://godoc.org/google.golang.org/grpc/keepalive#EnforcementPolicy for details.

type KeepaliveServerConfig

type KeepaliveServerConfig struct {
	ServerParameters  *KeepaliveServerParameters  `mapstructure:"server_parameters"`
	EnforcementPolicy *KeepaliveEnforcementPolicy `mapstructure:"enforcement_policy"`
}

KeepaliveServerConfig is the configuration for keepalive.

type KeepaliveServerParameters

type KeepaliveServerParameters struct {
	MaxConnectionIdle     time.Duration `mapstructure:"max_connection_idle"`
	MaxConnectionAge      time.Duration `mapstructure:"max_connection_age"`
	MaxConnectionAgeGrace time.Duration `mapstructure:"max_connection_age_grace"`
	Time                  time.Duration `mapstructure:"time"`
	Timeout               time.Duration `mapstructure:"timeout"`
}

KeepaliveServerParameters allow configuration of the keepalive.ServerParameters. The same default values as keepalive.ServerParameters are applicable and get applied by the server. See https://godoc.org/google.golang.org/grpc/keepalive#ServerParameters for details.