zip

package
v0.0.0-...-b75b2af Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 17, 2022 License: BSD-3-Clause Imports: 13 Imported by: 0

Documentation

Overview

Package zip provides support for reading and writing ZIP archives.

See: http://www.pkware.com/documents/casestudies/APPNOTE.TXT

This package does not support disk spanning.

A note about ZIP64:

To be backwards compatible the FileHeader has both 32 and 64 bit Size fields. The 64 bit fields will always contain the correct value and for normal archives both fields will be the same. For files requiring the ZIP64 format the 32 bit fields will be 0xffffffff and the 64 bit fields must be used instead.

Index

Examples

Constants

View Source 
const (
	Store   uint16 = 0
	Deflate uint16 = 8
)

Compression methods.

Variables

View Source 
var (
	ErrFormat    = errors.New("zip: not a valid zip file")
	ErrAlgorithm = errors.New("zip: unsupported compression algorithm")
	ErrChecksum  = errors.New("zip: checksum error")
)

Functions

func RegisterCompressor 

func RegisterCompressor(method uint16, comp Compressor)

RegisterCompressor registers custom compressors for a specified method ID. The common methods Store and Deflate are built in.

func RegisterDecompressor 

func RegisterDecompressor(method uint16, dcomp Decompressor)

RegisterDecompressor allows custom decompressors for a specified method ID. The common methods Store and Deflate are built in.

Types

type Compressor 

type Compressor func(w io.Writer) (io.WriteCloser, error)

A Compressor returns a new compressing writer, writing to w. The WriteCloser's Close method must be used to flush pending data to w. The Compressor itself must be safe to invoke from multiple goroutines simultaneously, but each returned writer will be used only by one goroutine at a time.

type Decompressor 

type Decompressor func(r io.Reader) io.ReadCloser

A Decompressor returns a new decompressing reader, reading from r. The ReadCloser's Close method must be used to release associated resources. The Decompressor itself must be safe to invoke from multiple goroutines simultaneously, but each returned reader will be used only by one goroutine at a time.

type File 

type File struct {
	FileHeader
	// contains filtered or unexported fields
}

func (*File) DataOffset 

func (f *File) DataOffset() (offset int64, err error)

DataOffset returns the offset of the file's possibly-compressed data, relative to the beginning of the zip file.

Most callers should instead use Open, which transparently decompresses data and verifies checksums.

func (*File) Open 

func (f *File) Open() (rc io.ReadCloser, err error)

Open returns a ReadCloser that provides access to the File's contents. Multiple files may be read concurrently.

type FileHeader 

type FileHeader struct {
	// Name is the name of the file.
	// It must be a relative path: it must not start with a drive
	// letter (e.g. C:) or leading slash, and only forward slashes
	// are allowed.
	Name string

	CreatorVersion     uint16
	ReaderVersion      uint16
	Flags              uint16
	Method             uint16
	ModifiedTime       uint16 // MS-DOS time
	ModifiedDate       uint16 // MS-DOS date
	CRC32              uint32
	CompressedSize     uint32 // Deprecated: Use CompressedSize64 instead.
	UncompressedSize   uint32 // Deprecated: Use UncompressedSize64 instead.
	CompressedSize64   uint64
	UncompressedSize64 uint64
	Extra              []byte
	ExternalAttrs      uint32 // Meaning depends on CreatorVersion
	Comment            string
}

FileHeader describes a file within a zip file. See the zip spec for details.

func FileInfoHeader 

func FileInfoHeader(fi os.FileInfo) (*FileHeader, error)

FileInfoHeader creates a partially-populated FileHeader from an os.FileInfo. Because os.FileInfo's Name method returns only the base name of the file it describes, it may be necessary to modify the Name field of the returned header to provide the full path name of the file.

func (*FileHeader) FileInfo 

func (h *FileHeader) FileInfo() os.FileInfo

FileInfo returns an os.FileInfo for the FileHeader.

func (*FileHeader) ModTime 

func (h *FileHeader) ModTime() time.Time

ModTime returns the modification time in UTC. The resolution is 2s.

func (*FileHeader) Mode 

func (h *FileHeader) Mode() (mode os.FileMode)

Mode returns the permission and mode bits for the FileHeader.

func (*FileHeader) SetModTime 

func (h *FileHeader) SetModTime(t time.Time)

SetModTime sets the ModifiedTime and ModifiedDate fields to the given time in UTC. The resolution is 2s.

func (*FileHeader) SetMode 

func (h *FileHeader) SetMode(mode os.FileMode)

SetMode changes the permission and mode bits for the FileHeader.

type ReadCloser 

type ReadCloser struct {
	Reader
	// contains filtered or unexported fields
}

func OpenReader 

func OpenReader(name string) (*ReadCloser, error)

OpenReader will open the Zip file specified by name and return a ReadCloser.

func (*ReadCloser) Close 

func (rc *ReadCloser) Close() error

Close closes the Zip file, rendering it unusable for I/O.

type Reader 

type Reader struct {
	File    []*File
	Comment string
	// contains filtered or unexported fields
}
Example 
package main

import (
	"archive/zip"
	"fmt"
	"io"
	"log"
	"os"
	"runtime"
)

func main() {
	// Open a zip archive for reading.
	r, err := zip.OpenReader(runtime.GOROOT() + "/src/archive/zip/testdata/readme.zip")
	if err != nil {
		log.Fatal(err)
	}
	defer r.Close()

	// Iterate through the files in the archive,
	// printing some of their contents.
	for _, f := range r.File {
		fmt.Printf("Contents of %s:\n", f.Name)
		rc, err := f.Open()
		if err != nil {
			log.Fatal(err)
		}
		_, err = io.CopyN(os.Stdout, rc, 68)
		if err != nil {
			log.Fatal(err)
		}
		rc.Close()
		fmt.Println()
	}
}

Output:

Contents of README:
This is the source code repository for the Go programming language.

func NewReader 

func NewReader(r io.ReaderAt, size int64) (*Reader, error)

NewReader returns a new Reader reading from r, which is assumed to have the given size in bytes.

func (*Reader) Append 

func (z *Reader) Append(w io.Writer) *Writer

Append appends entries to the existing zip archive represented by z. The writer w should be positioned at the end of the archive data. When the returned writer is closed, any entries with names that already exist in the archive will have been "replaced" by the new entries, although the original data will still be there.

func (*Reader) AppendOffset 

func (z *Reader) AppendOffset() int64

TODO: Document.

func (*Reader) RegisterDecompressor 

func (z *Reader) RegisterDecompressor(method uint16, dcomp Decompressor)

RegisterDecompressor registers or overrides a custom decompressor for a specific method ID. If a decompressor for a given method is not found, Reader will default to looking up the decompressor at the package level.

type Writer 

type Writer struct {
	// contains filtered or unexported fields
}

Writer implements a zip file writer.

Example 
package main

import (
	"archive/zip"
	"bytes"
	"log"
)

func main() {
	// Create a buffer to write our archive to.
	buf := new(bytes.Buffer)

	// Create a new zip archive.
	w := zip.NewWriter(buf)

	// Add some files to the archive.
	var files = []struct {
		Name, Body string
	}{
		{"readme.txt", "This archive contains some text files."},
		{"gopher.txt", "Gopher names:\nGeorge\nGeoffrey\nGonzo"},
		{"todo.txt", "Get animal handling licence.\nWrite more examples."},
	}
	for _, file := range files {
		f, err := w.Create(file.Name)
		if err != nil {
			log.Fatal(err)
		}
		_, err = f.Write([]byte(file.Body))
		if err != nil {
			log.Fatal(err)
		}
	}

	// Make sure to check the error on Close.
	err := w.Close()
	if err != nil {
		log.Fatal(err)
	}
}

Output:

func NewWriter 

func NewWriter(w io.Writer) *Writer

NewWriter returns a new Writer writing a zip file to w.

func (*Writer) Close 

func (w *Writer) Close() error

Close finishes writing the zip file by writing the central directory. It does not (and can not) close the underlying writer.

func (*Writer) Copy 

func (w *Writer) Copy(f *File) error

Copy copies the file f (obtained from a Reader) into w. It copies the compressed form directly.

func (*Writer) Create 

func (w *Writer) Create(name string) (io.Writer, error)

Create adds a file to the zip file using the provided name. It returns a Writer to which the file contents should be written. The name must be a relative path: it must not start with a drive letter (e.g. C:) or leading slash, and only forward slashes are allowed. The file's contents must be written to the io.Writer before the next call to Create, CreateHeader, or Close.

func (*Writer) CreateHeader 

func (w *Writer) CreateHeader(fh *FileHeader) (io.Writer, error)

CreateHeader adds a file to the zip file using the provided FileHeader for the file metadata. It returns a Writer to which the file contents should be written.

The file's contents must be written to the io.Writer before the next call to Create, CreateHeader, or Close. The provided FileHeader fh must not be modified after a call to CreateHeader.

func (*Writer) Flush 

func (w *Writer) Flush() error

Flush flushes any buffered data to the underlying writer. Calling Flush is not normally necessary; calling Close is sufficient.

func (*Writer) RegisterCompressor 

func (w *Writer) RegisterCompressor(method uint16, comp Compressor)

RegisterCompressor registers or overrides a custom compressor for a specific method ID. If a compressor for a given method is not found, Writer will default to looking up the compressor at the package level.

Example 
package main

import (
	"archive/zip"
	"bytes"
	"compress/flate"
	"io"
)

func main() {
	// Override the default Deflate compressor with a higher compression level.

	// Create a buffer to write our archive to.
	buf := new(bytes.Buffer)

	// Create a new zip archive.
	w := zip.NewWriter(buf)

	// Register a custom Deflate compressor.
	w.RegisterCompressor(zip.Deflate, func(out io.Writer) (io.WriteCloser, error) {
		return flate.NewWriter(out, flate.BestCompression)
	})

	// Proceed to add files to w.
}

Output:

func (*Writer) SetOffset 

func (w *Writer) SetOffset(n int64)

SetOffset sets the offset of the beginning of the zip data within the underlying writer. It should be used when the zip data is appended to an existing file, such as a binary executable. It must be called before any data is written.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.