dns

package module
v0.0.0-...-c12ae07 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 24, 2014 License: BSD-3-Clause Imports: 34 Imported by: 0

README

Build Status

Alternative (more granular) approach to a DNS library

Less is more.

Complete and usable DNS library. All widely used Resource Records are supported, including the DNSSEC types. It follows a lean and mean philosophy. If there is stuff you should know as a DNS programmer there isn't a convenience function for it. Server side and client side programming is supported, i.e. you can build servers and resolvers with it.

If you like this, you may also be interested in:

Goals

  • KISS;
  • Fast;
  • Small API, if its easy to code in Go, don't make a function for it.

Users

A not-so-up-to-date-list-that-may-be-actually-current:

Send pull request if you want to be listed here.

Features

  • UDP/TCP queries, IPv4 and IPv6;
  • RFC 1035 zone file parsing ($INCLUDE, $ORIGIN, $TTL and $GENERATE (for all record types) are supported;
  • Fast:
    • Reply speed around ~ 80K qps (faster hardware results in more qps);
    • Parsing RRs ~ 100K RR/s, that's 5M records in about 50 seconds;
  • Server side programming (mimicking the net/http package);
  • Client side programming;
  • DNSSEC: signing, validating and key generation for DSA, RSA and ECDSA;
  • EDNS0, NSID;
  • AXFR/IXFR;
  • TSIG;
  • DNS name compression;
  • Depends only on the standard library.

Have fun!

Miek Gieben - 2010-2012 - miek@miek.nl

Building

Building is done with the go tool. If you have setup your GOPATH correctly, the following should work:

go get github.com/miekg/dns
go build github.com/miekg/dns

Examples

A short "how to use the API" is at the beginning of dns.go (this also will show when you call godoc github.com/miekg/dns).

Example programs can be found in the github.com/miekg/exdns repository.

Supported RFCs

all of them

  • 103{4,5} - DNS standard
  • 1348 - NSAP record
  • 1982 - Serial Arithmetic
  • 1876 - LOC record
  • 1995 - IXFR
  • 1996 - DNS notify
  • 2136 - DNS Update (dynamic updates)
  • 2181 - RRset definition - there is no RRset type though, just []RR
  • 2537 - RSAMD5 DNS keys
  • 2065 - DNSSEC (updated in later RFCs)
  • 2671 - EDNS record
  • 2782 - SRV record
  • 2845 - TSIG record
  • 2915 - NAPTR record
  • 2929 - DNS IANA Considerations
  • 3110 - RSASHA1 DNS keys
  • 3225 - DO bit (DNSSEC OK)
  • 340{1,2,3} - NAPTR record
  • 3445 - Limiting the scope of (DNS)KEY
  • 3597 - Unkown RRs
  • 403{3,4,5} - DNSSEC + validation functions
  • 4255 - SSHFP record
  • 4343 - Case insensitivity
  • 4408 - SPF record
  • 4509 - SHA256 Hash in DS
  • 4592 - Wildcards in the DNS
  • 4635 - HMAC SHA TSIG
  • 4701 - DHCID
  • 4892 - id.server
  • 5001 - NSID
  • 5155 - NSEC3 record
  • 5205 - HIP record
  • 5702 - SHA2 in the DNS
  • 5936 - AXFR
  • 5966 - TCP implementation recommendations
  • 6605 - ECDSA
  • 6742 - ILNP DNS
  • 6891 - EDNS0 update
  • 6895 - DNS IANA considerations
  • 6975 - Algorithm Understanding in DNSSEC
  • 7043 - EUI48/EUI64 records
  • 7314 - DNS (EDNS) EXPIRE Option
  • xxxx - URI record (draft)
  • xxxx - EDNS0 DNS Update Lease (draft)

Loosely based upon

  • ldns
  • NSD
  • Net::DNS
  • GRONG

TODO

  • privatekey.Precompute() when signing?
  • Last remaining RRs: APL, ATMA, A6 and NXT;
  • Missing in parsing: ISDN, UNSPEC, ATMA;
  • CAA parsing is broken;
  • NSEC(3) cover/match/closest enclose;
  • Replies with TC bit are not parsed to the end.
  • SIG(0)

Documentation

Overview

Package dns implements a full featured interface to the Domain Name System. Server- and client-side programming is supported. The package allows complete control over what is send out to the DNS. The package API follows the less-is-more principle, by presenting a small, clean interface.

The package dns supports (asynchronous) querying/replying, incoming/outgoing zone transfers, TSIG, EDNS0, dynamic updates, notifies and DNSSEC validation/signing. Note that domain names MUST be fully qualified, before sending them, unqualified names in a message will result in a packing failure.

Resource records are native types. They are not stored in wire format. Basic usage pattern for creating a new resource record: 

r := new(dns.MX)
r.Hdr = dns.RR_Header{Name: "miek.nl.", Rrtype: dns.TypeMX, Class: dns.ClassINET, Ttl: 3600}
r.Preference = 10
r.Mx = "mx.miek.nl."

Or directly from a string: 

mx, err := dns.NewRR("miek.nl. 3600 IN MX 10 mx.miek.nl.")

Or when the default TTL (3600) and class (IN) suit you: 

mx, err := dns.NewRR("miek.nl. MX 10 mx.miek.nl.")

Or even: 

mx, err := dns.NewRR("$ORIGIN nl.\nmiek 1H IN MX 10 mx.miek")

In the DNS messages are exchanged, these messages contain resource records (sets). Use pattern for creating a message: 

m := new(dns.Msg)
m.SetQuestion("miek.nl.", dns.TypeMX)

Or when not certain if the domain name is fully qualified: 

m.SetQuestion(dns.Fqdn("miek.nl"), dns.TypeMX)

The message m is now a message with the question section set to ask the MX records for the miek.nl. zone.

The following is slightly more verbose, but more flexible: 

m1 := new(dns.Msg)
m1.Id = dns.Id()
m1.RecursionDesired = true
m1.Question = make([]dns.Question, 1)
m1.Question[0] = dns.Question{"miek.nl.", dns.TypeMX, dns.ClassINET}

After creating a message it can be send. Basic use pattern for synchronous querying the DNS at a server configured on 127.0.0.1 and port 53: 

c := new(dns.Client)
in, rtt, err := c.Exchange(m1, "127.0.0.1:53")

Suppressing multiple outstanding queries (with the same question, type and class) is as easy as setting: 

c.SingleInflight = true

If these "advanced" features are not needed, a simple UDP query can be send, with: 

in, err := dns.Exchange(m1, "127.0.0.1:53")

When this functions returns you will get dns message. A dns message consists out of four sections. The question section: in.Question, the answer section: in.Answer, the authority section: in.Ns and the additional section: in.Extra.

Each of these sections (except the Question section) contain a []RR. Basic use pattern for accessing the rdata of a TXT RR as the first RR in the Answer section: 

if t, ok := in.Answer[0].(*dns.TXT); ok {
	// do something with t.Txt
}

Domain Name and TXT Character String Representations

Both domain names and TXT character strings are converted to presentation form both when unpacked and when converted to strings.

For TXT character strings, tabs, carriage returns and line feeds will be converted to \t, \r and \n respectively. Back slashes and quotations marks will be escaped. Bytes below 32 and above 127 will be converted to \DDD form.

For domain names, in addition to the above rules brackets, periods, spaces, semicolons and the at symbol are escaped.

DNSSEC

DNSSEC (DNS Security Extension) adds a layer of security to the DNS. It uses public key cryptography to sign resource records. The public keys are stored in DNSKEY records and the signatures in RRSIG records.

Requesting DNSSEC information for a zone is done by adding the DO (DNSSEC OK) bit to an request. 

m := new(dns.Msg)
m.SetEdns0(4096, true)

Signature generation, signature verification and key generation are all supported.

EDNS0

EDNS0 is an extension mechanism for the DNS defined in RFC 2671 and updated by RFC 6891. It defines an new RR type, the OPT RR, which is then completely abused. Basic use pattern for creating an (empty) OPT RR: 

o := new(dns.OPT)
o.Hdr.Name = "." // MUST be the root zone, per definition.
o.Hdr.Rrtype = dns.TypeOPT

The rdata of an OPT RR consists out of a slice of EDNS0 (RFC 6891) interfaces. Currently only a few have been standardized: EDNS0_NSID (RFC 5001) and EDNS0_SUBNET (draft-vandergaast-edns-client-subnet-02). Note that these options may be combined in an OPT RR. Basic use pattern for a server to check if (and which) options are set: 

// o is a dns.OPT
for _, s := range o.Option {
	switch e := s.(type) {
	case *dns.EDNS0_NSID:
		// do stuff with e.Nsid
	case *dns.EDNS0_SUBNET:
		// access e.Family, e.Address, etc.
	}
}

PRIVATE RR

RFC 6895 sets aside a range of type codes for private use. This range is 65,280 - 65,534 (0xFF00 - 0xFFFE). When experimenting with new Resource Records these can be used, before requesting an official type code from IANA.

TRANSACTION SIGNATURE

An TSIG or transaction signature adds a HMAC TSIG record to each message sent. The supported algorithms include: HmacMD5, HmacSHA1 and HmacSHA256.

Basic use pattern when querying with a TSIG name "axfr." (note that these key names must be fully qualified - as they are domain names) and the base64 secret "so6ZGir4GPAqINNh9U5c3A==": 

c := new(dns.Client)
c.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
m := new(dns.Msg)
m.SetQuestion("miek.nl.", dns.TypeMX)
m.SetTsig("axfr.", dns.HmacMD5, 300, time.Now().Unix())
...
// When sending the TSIG RR is calculated and filled in before sending

When requesting an zone transfer (almost all TSIG usage is when requesting zone transfers), with TSIG, this is the basic use pattern. In this example we request an AXFR for miek.nl. with TSIG key named "axfr." and secret "so6ZGir4GPAqINNh9U5c3A==" and using the server 176.58.119.54: 

t := new(dns.Transfer)
m := new(dns.Msg)
t.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
m.SetAxfr("miek.nl.")
m.SetTsig("axfr.", dns.HmacMD5, 300, time.Now().Unix())
c, err := t.In(m, "176.58.119.54:53")
for r := range c { /* r.RR */ }

You can now read the records from the transfer as they come in. Each envelope is checked with TSIG. If something is not correct an error is returned.

Basic use pattern validating and replying to a message that has TSIG set. 

server := &dns.Server{Addr: ":53", Net: "udp"}
server.TsigSecret = map[string]string{"axfr.": "so6ZGir4GPAqINNh9U5c3A=="}
go server.ListenAndServe()
dns.HandleFunc(".", handleRequest)

func handleRequest(w dns.ResponseWriter, r *dns.Msg) {
	m := new(Msg)
	m.SetReply(r)
	if r.IsTsig() {
		if w.TsigStatus() == nil {
			// *Msg r has an TSIG record and it was validated
			m.SetTsig("axfr.", dns.HmacMD5, 300, time.Now().Unix())
		} else {
			// *Msg r has an TSIG records and it was not valided
		}
	}
	w.WriteMsg(m)
}

DYNAMIC UPDATES

Dynamic updates reuses the DNS message format, but renames three of the sections. Question is Zone, Answer is Prerequisite, Authority is Update, only the Additional is not renamed. See RFC 2136 for the gory details.

You can set a rather complex set of rules for the existence of absence of certain resource records or names in a zone to specify if resource records should be added or removed. The table from RFC 2136 supplemented with the Go DNS function shows which functions exist to specify the prerequisites.

3.2.4 - Table Of Metavalues Used In Prerequisite Section 

CLASS    TYPE     RDATA    Meaning                    Function
--------------------------------------------------------------
ANY      ANY      empty    Name is in use             dns.NameUsed
ANY      rrset    empty    RRset exists (value indep) dns.RRsetUsed
NONE     ANY      empty    Name is not in use         dns.NameNotUsed
NONE     rrset    empty    RRset does not exist       dns.RRsetNotUsed
zone     rrset    rr       RRset exists (value dep)   dns.Used

The prerequisite section can also be left empty. If you have decided on the prerequisites you can tell what RRs should be added or deleted. The next table shows the options you have and what functions to call.

3.4.2.6 - Table Of Metavalues Used In Update Section 

CLASS    TYPE     RDATA    Meaning                     Function
---------------------------------------------------------------
ANY      ANY      empty    Delete all RRsets from name dns.RemoveName
ANY      rrset    empty    Delete an RRset             dns.RemoveRRset
NONE     rrset    rr       Delete an RR from RRset     dns.Remove
zone     rrset    rr       Add to an RRset             dns.Insert

Index

Examples

Constants

View Source 
const (
	DefaultMsgSize = 4096  // Standard default for larger than 512 bytes.
	MinMsgSize     = 512   // Minimal size of a DNS packet.
	MaxMsgSize     = 65536 // Largest possible DNS packet.

)
View Source 
const (
	RSAMD5           = 1
	DH               = 2
	DSA              = 3
	ECC              = 4
	RSASHA1          = 5
	DSANSEC3SHA1     = 6
	RSASHA1NSEC3SHA1 = 7
	RSASHA256        = 8
	RSASHA512        = 10
	ECCGOST          = 12
	ECDSAP256SHA256  = 13
	ECDSAP384SHA384  = 14
	INDIRECT         = 252
	PRIVATEDNS       = 253 // Private (experimental keys)
	PRIVATEOID       = 254
)

DNSSEC encryption algorithm codes.

View Source 
const (
	SHA1   // RFC 4034
	SHA256 // RFC 4509
	GOST94 // RFC 5933
	SHA384 // Experimental
	SHA512 // Experimental
)

DNSSEC hashing algorithm codes.

View Source 
const (
	SEP    = 1
	REVOKE = 1 << 7
	ZONE   = 1 << 8
)

DNSKEY flag values.

View Source 
const (
	EDNS0LLQ         = 0x1    // long lived queries: http://tools.ietf.org/html/draft-sekar-dns-llq-01
	EDNS0UL          = 0x2    // update lease draft: http://files.dns-sd.org/draft-sekar-dns-ul.txt
	EDNS0NSID        = 0x3    // nsid (RFC5001)
	EDNS0DAU         = 0x5    // DNSSEC Algorithm Understood
	EDNS0DHU         = 0x6    // DS Hash Understood
	EDNS0N3U         = 0x7    // NSEC3 Hash Understood
	EDNS0SUBNET      = 0x8    // client-subnet (RFC6891)
	EDNS0EXPIRE      = 0x9    // EDNS0 expire
	EDNS0SUBNETDRAFT = 0x50fa // Don't use! Use EDNS0SUBNET

)

EDNS0 Option codes.

View Source 
const (
	HmacMD5    = "hmac-md5.sig-alg.reg.int."
	HmacSHA1   = "hmac-sha1."
	HmacSHA256 = "hmac-sha256."
)

HMAC hashing codes. These are transmitted as domain names.

View Source 
const (
	// valid RR_Header.Rrtype and Question.qtype
	TypeNone       uint16 = 0
	TypeA          uint16 = 1
	TypeNS         uint16 = 2
	TypeMD         uint16 = 3
	TypeMF         uint16 = 4
	TypeCNAME      uint16 = 5
	TypeSOA        uint16 = 6
	TypeMB         uint16 = 7
	TypeMG         uint16 = 8
	TypeMR         uint16 = 9
	TypeNULL       uint16 = 10
	TypeWKS        uint16 = 11
	TypePTR        uint16 = 12
	TypeHINFO      uint16 = 13
	TypeMINFO      uint16 = 14
	TypeMX         uint16 = 15
	TypeTXT        uint16 = 16
	TypeRP         uint16 = 17
	TypeAFSDB      uint16 = 18
	TypeX25        uint16 = 19
	TypeISDN       uint16 = 20
	TypeRT         uint16 = 21
	TypeNSAP       uint16 = 22
	TypeNSAPPTR    uint16 = 23
	TypeSIG        uint16 = 24
	TypeKEY        uint16 = 25
	TypePX         uint16 = 26
	TypeGPOS       uint16 = 27
	TypeAAAA       uint16 = 28
	TypeLOC        uint16 = 29
	TypeNXT        uint16 = 30
	TypeEID        uint16 = 31
	TypeNIMLOC     uint16 = 32
	TypeSRV        uint16 = 33
	TypeATMA       uint16 = 34
	TypeNAPTR      uint16 = 35
	TypeKX         uint16 = 36
	TypeCERT       uint16 = 37
	TypeDNAME      uint16 = 39
	TypeOPT        uint16 = 41 // EDNS
	TypeDS         uint16 = 43
	TypeSSHFP      uint16 = 44
	TypeIPSECKEY   uint16 = 45
	TypeRRSIG      uint16 = 46
	TypeNSEC       uint16 = 47
	TypeDNSKEY     uint16 = 48
	TypeDHCID      uint16 = 49
	TypeNSEC3      uint16 = 50
	TypeNSEC3PARAM uint16 = 51
	TypeTLSA       uint16 = 52
	TypeHIP        uint16 = 55
	TypeNINFO      uint16 = 56
	TypeRKEY       uint16 = 57
	TypeTALINK     uint16 = 58
	TypeCDS        uint16 = 59
	TypeOPENPGPKEY uint16 = 61
	TypeSPF        uint16 = 99
	TypeUINFO      uint16 = 100
	TypeUID        uint16 = 101
	TypeGID        uint16 = 102
	TypeUNSPEC     uint16 = 103
	TypeNID        uint16 = 104
	TypeL32        uint16 = 105
	TypeL64        uint16 = 106
	TypeLP         uint16 = 107
	TypeEUI48      uint16 = 108
	TypeEUI64      uint16 = 109

	TypeTKEY uint16 = 249
	TypeTSIG uint16 = 250
	// valid Question.Qtype only
	TypeIXFR  uint16 = 251
	TypeAXFR  uint16 = 252
	TypeMAILB uint16 = 253
	TypeMAILA uint16 = 254
	TypeANY   uint16 = 255

	TypeURI      uint16 = 256
	TypeCAA      uint16 = 257
	TypeTA       uint16 = 32768
	TypeDLV      uint16 = 32769
	TypeReserved uint16 = 65535

	// valid Question.Qclass
	ClassINET   = 1
	ClassCSNET  = 2
	ClassCHAOS  = 3
	ClassHESIOD = 4
	ClassNONE   = 254
	ClassANY    = 255

	// Msg.rcode
	RcodeSuccess        = 0
	RcodeFormatError    = 1
	RcodeServerFailure  = 2
	RcodeNameError      = 3
	RcodeNotImplemented = 4
	RcodeRefused        = 5
	RcodeYXDomain       = 6
	RcodeYXRrset        = 7
	RcodeNXRrset        = 8
	RcodeNotAuth        = 9
	RcodeNotZone        = 10
	RcodeBadSig         = 16 // TSIG
	RcodeBadVers        = 16 // EDNS0
	RcodeBadKey         = 17
	RcodeBadTime        = 18
	RcodeBadMode        = 19 // TKEY
	RcodeBadName        = 20
	RcodeBadAlg         = 21
	RcodeBadTrunc       = 22 // TSIG

	// Opcode
	OpcodeQuery  = 0
	OpcodeIQuery = 1
	OpcodeStatus = 2
	// There is no 3
	OpcodeNotify = 4
	OpcodeUpdate = 5
)

Wire constants and supported types.

Variables

View Source 
var (
	ErrFqdn      error = &Error{err: "domain must be fully qualified"}
	ErrId        error = &Error{err: "id mismatch"}
	ErrRdata     error = &Error{err: "bad rdata"}
	ErrBuf       error = &Error{err: "buffer size too small"}
	ErrShortRead error = &Error{err: "short read"}
	ErrConn      error = &Error{err: "conn holds both UDP and TCP connection"}
	ErrConnEmpty error = &Error{err: "conn has no connection"}
	ErrServ      error = &Error{err: "no servers could be reached"}
	ErrKey       error = &Error{err: "bad key"}
	ErrPrivKey   error = &Error{err: "bad private key"}
	ErrKeySize   error = &Error{err: "bad key size"}
	ErrKeyAlg    error = &Error{err: "bad key algorithm"}
	ErrAlg       error = &Error{err: "bad algorithm"}
	ErrTime      error = &Error{err: "bad time"}
	ErrNoSig     error = &Error{err: "no signature found"}
	ErrSig       error = &Error{err: "bad signature"}
	ErrSecret    error = &Error{err: "no secrets defined"}
	ErrSigGen    error = &Error{err: "bad signature generation"}
	ErrAuth      error = &Error{err: "bad authentication"}
	ErrSoa       error = &Error{err: "no SOA"}
	ErrRRset     error = &Error{err: "bad rrset"}
)
View Source 
var AlgorithmToString = map[uint8]string{
	RSAMD5:           "RSAMD5",
	DH:               "DH",
	DSA:              "DSA",
	RSASHA1:          "RSASHA1",
	DSANSEC3SHA1:     "DSA-NSEC3-SHA1",
	RSASHA1NSEC3SHA1: "RSASHA1-NSEC3-SHA1",
	RSASHA256:        "RSASHA256",
	RSASHA512:        "RSASHA512",
	ECCGOST:          "ECC-GOST",
	ECDSAP256SHA256:  "ECDSAP256SHA256",
	ECDSAP384SHA384:  "ECDSAP384SHA384",
	INDIRECT:         "INDIRECT",
	PRIVATEDNS:       "PRIVATEDNS",
	PRIVATEOID:       "PRIVATEOID",
}

Map for algorithm names.

View Source 
var ClassToString = map[uint16]string{
	ClassINET:   "IN",
	ClassCSNET:  "CS",
	ClassCHAOS:  "CH",
	ClassHESIOD: "HS",
	ClassNONE:   "NONE",
	ClassANY:    "ANY",
}

Map of strings for each CLASS wire type.

View Source 
var DefaultServeMux = NewServeMux()

DefaultServeMux is the default ServeMux used by Serve.

View Source 
var HashToString = map[uint8]string{
	SHA1:   "SHA1",
	SHA256: "SHA256",
	GOST94: "GOST94",
	SHA384: "SHA384",
	SHA512: "SHA512",
}

Map for hash names.

View Source 
var Id func() uint16 = id

Id, by default, returns a 16 bits random number to be used as a message id. The random provided should be good enough. This being a variable the function can be reassigned to a custom function. For instance, to make it return a static value: 

dns.Id = func() uint16 { return 3 }
View Source 
var OpcodeToString = map[int]string{
	OpcodeQuery:  "QUERY",
	OpcodeIQuery: "IQUERY",
	OpcodeStatus: "STATUS",
	OpcodeNotify: "NOTIFY",
	OpcodeUpdate: "UPDATE",
}

Map of strings for opcodes.

View Source 
var RcodeToString = map[int]string{
	RcodeSuccess:        "NOERROR",
	RcodeFormatError:    "FORMERR",
	RcodeServerFailure:  "SERVFAIL",
	RcodeNameError:      "NXDOMAIN",
	RcodeNotImplemented: "NOTIMPL",
	RcodeRefused:        "REFUSED",
	RcodeYXDomain:       "YXDOMAIN",
	RcodeYXRrset:        "YXRRSET",
	RcodeNXRrset:        "NXRRSET",
	RcodeNotAuth:        "NOTAUTH",
	RcodeNotZone:        "NOTZONE",
	RcodeBadSig:         "BADSIG",

	RcodeBadKey:   "BADKEY",
	RcodeBadTime:  "BADTIME",
	RcodeBadMode:  "BADMODE",
	RcodeBadName:  "BADNAME",
	RcodeBadAlg:   "BADALG",
	RcodeBadTrunc: "BADTRUNC",
}

Map of strings for rcodes.

View Source 
var StringToAlgorithm = reverseInt8(AlgorithmToString)

Map of algorithm strings.

View Source 
var StringToClass = reverseInt16(ClassToString)
View Source 
var StringToHash = reverseInt8(HashToString)

Map of hash strings.

View Source 
var StringToOpcode = reverseInt(OpcodeToString)

Map of opcodes strings.

View Source 
var StringToRcode = reverseInt(RcodeToString)

Map of rcodes strings.

View Source 
var StringToType = reverseInt16(TypeToString)

Reverse, needed for string parsing.

View Source 
var TypeToString = map[uint16]string{
	TypeA:          "A",
	TypeAAAA:       "AAAA",
	TypeAFSDB:      "AFSDB",
	TypeANY:        "ANY",
	TypeATMA:       "ATMA",
	TypeAXFR:       "AXFR",
	TypeCAA:        "CAA",
	TypeCDS:        "CDS",
	TypeCERT:       "CERT",
	TypeCNAME:      "CNAME",
	TypeDHCID:      "DHCID",
	TypeDLV:        "DLV",
	TypeDNAME:      "DNAME",
	TypeDNSKEY:     "DNSKEY",
	TypeDS:         "DS",
	TypeEID:        "EID",
	TypeEUI48:      "EUI48",
	TypeEUI64:      "EUI64",
	TypeGID:        "GID",
	TypeGPOS:       "GPOS",
	TypeHINFO:      "HINFO",
	TypeHIP:        "HIP",
	TypeIPSECKEY:   "IPSECKEY",
	TypeISDN:       "ISDN",
	TypeIXFR:       "IXFR",
	TypeKX:         "KX",
	TypeL32:        "L32",
	TypeL64:        "L64",
	TypeLOC:        "LOC",
	TypeLP:         "LP",
	TypeMB:         "MB",
	TypeMD:         "MD",
	TypeMF:         "MF",
	TypeMG:         "MG",
	TypeMINFO:      "MINFO",
	TypeMR:         "MR",
	TypeMX:         "MX",
	TypeNAPTR:      "NAPTR",
	TypeNID:        "NID",
	TypeNINFO:      "NINFO",
	TypeNIMLOC:     "NIMLOC",
	TypeNS:         "NS",
	TypeNSAP:       "NSAP",
	TypeNSAPPTR:    "NSAP-PTR",
	TypeNSEC3:      "NSEC3",
	TypeNSEC3PARAM: "NSEC3PARAM",
	TypeNSEC:       "NSEC",
	TypeNULL:       "NULL",
	TypeOPT:        "OPT",
	TypeOPENPGPKEY: "OPENPGPKEY",
	TypePTR:        "PTR",
	TypeRKEY:       "RKEY",
	TypeRP:         "RP",
	TypeRRSIG:      "RRSIG",
	TypeRT:         "RT",
	TypeSOA:        "SOA",
	TypeSPF:        "SPF",
	TypeSRV:        "SRV",
	TypeSSHFP:      "SSHFP",
	TypeTA:         "TA",
	TypeTALINK:     "TALINK",
	TypeTKEY:       "TKEY",
	TypeTLSA:       "TLSA",
	TypeTSIG:       "TSIG",
	TypeTXT:        "TXT",
	TypePX:         "PX",
	TypeUID:        "UID",
	TypeUINFO:      "UINFO",
	TypeUNSPEC:     "UNSPEC",
	TypeURI:        "URI",
	TypeWKS:        "WKS",
	TypeX25:        "X25",
}

Map of strings for each RR wire type.

Functions

func ActivateAndServe 

func ActivateAndServe(l net.Listener, p net.PacketConn, handler Handler) error

ActivateAndServe activates a server with a listener from systemd, l and p should not both be non-nil. If both l and p are not nil only p will be used. Invoke handler for incoming queries.

func CertificateToDANE 

func CertificateToDANE(selector, matchingType uint8, cert *x509.Certificate) (string, error)

CertificateToDANE converts a certificate to a hex string as used in the TLSA record.

func CompareDomainName 

func CompareDomainName(s1, s2 string) (n int)

CompareDomainName compares the names s1 and s2 and returns how many labels they have in common starting from the *right*. The comparison stops at the first inequality. The names are not downcased before the comparison.

www.miek.nl. and miek.nl. have two labels in common: miek and nl www.miek.nl. and www.bla.nl. have one label in common: nl

func CountLabel 

func CountLabel(s string) (labels int)

CountLabel counts the the number of labels in the string s.

func Fqdn 

func Fqdn(s string) string

Fqdns return the fully qualified domain name from s. If s is already fully qualified, it behaves as the identity function.

func Handle 

func Handle(pattern string, handler Handler)

Handle registers the handler with the given pattern in the DefaultServeMux. The documentation for ServeMux explains how patterns are matched.

func HandleFailed 

func HandleFailed(w ResponseWriter, r *Msg)

FailedHandler returns a HandlerFunc returns SERVFAIL for every request it gets.

func HandleFunc 

func HandleFunc(pattern string, handler func(ResponseWriter, *Msg))

HandleFunc registers the handler function with the given pattern in the DefaultServeMux.

func HandleRemove 

func HandleRemove(pattern string)

HandleRemove deregisters the handle with the given pattern in the DefaultServeMux.

func HashName 

func HashName(label string, ha uint8, iter uint16, salt string) string

HashName hashes a string (label) according to RFC 5155. It returns the hashed string in uppercase.

func IsDomainName 

func IsDomainName(s string) (labels int, ok bool)

IsDomainName checks if s is a valid domainname, it returns the number of labels and true, when a domain name is valid. Note that non fully qualified domain name is considered valid, in this case the last label is counted in the number of labels. When false is returned the number of labels is not defined.

func IsFqdn 

func IsFqdn(s string) bool

IsFqdn checks if a domain name is fully qualified.

func IsMsg 

func IsMsg(buf []byte) error

IsMsg sanity checks buf and returns an error if it isn't a valid DNS packet. The checking is performed on the binary payload.

func IsSubDomain 

func IsSubDomain(parent, child string) bool

IsSubDomain checks if child is indeed a child of the parent. Both child and parent are *not* downcased before doing the comparison.

func ListenAndServe 

func ListenAndServe(addr string, network string, handler Handler) error

ListenAndServe Starts a server on addresss and network speficied. Invoke handler for incoming queries.

func NextLabel 

func NextLabel(s string, offset int) (i int, end bool)

NextLabel returns the index of the start of the next label in the string s starting at offset. The bool end is true when the end of the string has been reached.

func PackDomainName 

func PackDomainName(s string, msg []byte, off int, compression map[string]int, compress bool) (off1 int, err error)

PackDomainName packs a domain name s into msg[off:]. If compression is wanted compress must be true and the compression map needs to hold a mapping between domain names and offsets pointing into msg[].

func PackRR 

func PackRR(rr RR, msg []byte, off int, compression map[string]int, compress bool) (off1 int, err error)

PackRR packs a resource record rr into msg[off:]. See PackDomainName for documentation about the compression.

func PackStruct 

func PackStruct(any interface{}, msg []byte, off int) (off1 int, err error)

PackStruct packs any structure to wire format.

func ParseZone 

func ParseZone(r io.Reader, origin, file string) chan *Token

ParseZone reads a RFC 1035 style one from r. It returns *Tokens on the returned channel, which consist out the parsed RR, a potential comment or an error. If there is an error the RR is nil. The string file is only used in error reporting. The string origin is used as the initial origin, as if the file would start with: $ORIGIN origin . The directives $INCLUDE, $ORIGIN, $TTL and $GENERATE are supported. The channel t is closed by ParseZone when the end of r is reached.

Basic usage pattern when reading from a string (z) containing the zone data: 

for x := range dns.ParseZone(strings.NewReader(z), "", "") {
	if x.Error != nil {
		// Do something with x.RR
	}
}

Comments specified after an RR (and on the same line!) are returned too: 

foo. IN A 10.0.0.1 ; this is a comment

The text "; this is comment" is returned in Token.Comment . Comments inside the RR are discarded. Comments on a line by themselves are discarded too.

func PrevLabel 

func PrevLabel(s string, n int) (i int, start bool)

PrevLabel returns the index of the label when starting from the right and jumping n labels to the left. The bool start is true when the start of the string has been overshot.

func PrivateHandle 

func PrivateHandle(rtypestr string, rtype uint16, generator func() PrivateRdata)

PrivateHandle registers a private resource record type. It requires string and numeric representation of private RR type and generator function as argument.

Example 
package main

import (
	"errors"
	"fmt"
	"github.com/miekg/dns"
	"log"
	"net"
)

const TypeAPAIR = 0x0F99

type APAIR struct {
	addr [2]net.IP
}

func NewAPAIR() dns.PrivateRdata { return new(APAIR) }

func (rd *APAIR) String() string { return rd.addr[0].String() + " " + rd.addr[1].String() }
func (rd *APAIR) Parse(txt []string) error {
	if len(txt) != 2 {
		return errors.New("two addresses required for APAIR")
	}
	for i, s := range txt {
		ip := net.ParseIP(s)
		if ip == nil {
			return errors.New("invalid IP in APAIR text representation")
		}
		rd.addr[i] = ip
	}
	return nil
}

func (rd *APAIR) Pack(buf []byte) (int, error) {
	b := append([]byte(rd.addr[0]), []byte(rd.addr[1])...)
	n := copy(buf, b)
	if n != len(b) {
		return n, dns.ErrBuf
	}
	return n, nil
}

func (rd *APAIR) Unpack(buf []byte) (int, error) {
	ln := net.IPv4len * 2
	if len(buf) != ln {
		return 0, errors.New("invalid length of APAIR rdata")
	}
	cp := make([]byte, ln)
	copy(cp, buf)

	rd.addr[0] = net.IP(cp[:3])
	rd.addr[1] = net.IP(cp[4:])

	return len(buf), nil
}

func (rd *APAIR) Copy(dest dns.PrivateRdata) error {
	cp := make([]byte, rd.Len())
	_, err := rd.Pack(cp)
	if err != nil {
		return err
	}

	d := dest.(*APAIR)
	d.addr[0] = net.IP(cp[:3])
	d.addr[1] = net.IP(cp[4:])
	return nil
}

func (rd *APAIR) Len() int {
	return net.IPv4len * 2
}

func main() {
	dns.PrivateHandle("APAIR", TypeAPAIR, NewAPAIR)
	defer dns.PrivateHandleRemove(TypeAPAIR)

	rr, err := dns.NewRR("miek.nl. APAIR (1.2.3.4    1.2.3.5)")
	if err != nil {
		log.Fatal("could not parse APAIR record: ", err)
	}
	fmt.Println(rr)
	

Output:

func PrivateHandleRemove 

func PrivateHandleRemove(rtype uint16)

PrivateHandleRemove removes defenitions required to support private RR type.

func ReverseAddr 

func ReverseAddr(addr string) (arpa string, err error)

ReverseAddr returns the in-addr.arpa. or ip6.arpa. hostname of the IP address suitable for reverse DNS (PTR) record lookups or an error if it fails to parse the IP address.

func Split 

func Split(s string) []int

Split splits a name s into its label indexes. www.miek.nl. returns []int{0, 4, 9}, www.miek.nl also returns []int{0, 4, 9}. The root name (.) returns nil. Also see dns.SplitDomainName.

func SplitDomainName 

func SplitDomainName(s string) (labels []string)

SplitDomainName splits a name string into it's labels. www.miek.nl. returns []string{"www", "miek", "nl"} The root label (.) returns nil. Note that using strings.Split(s) will work in most cases, but does not handle escaped dots (\.) for instance.

func StringToTime 

func StringToTime(s string) (uint32, error)

StringToTime translates the RRSIG's incep. and expir. times from string values like "20110403154150" to an 32 bit integer. It takes serial arithmetic (RFC 1982) into account.

func TLSAName 

func TLSAName(name, service, network string) (string, error)

TLSAName returns the ownername of a TLSA resource record as per the rules specified in RFC 6698, Section 3.

func TimeToString 

func TimeToString(t uint32) string

TimeToString translates the RRSIG's incep. and expir. times to the string representation used when printing the record. It takes serial arithmetic (RFC 1982) into account.

func TsigGenerate 

func TsigGenerate(m *Msg, secret, requestMAC string, timersOnly bool) ([]byte, string, error)

TsigGenerate fills out the TSIG record attached to the message. The message should contain a "stub" TSIG RR with the algorithm, key name (owner name of the RR), time fudge (defaults to 300 seconds) and the current time The TSIG MAC is saved in that Tsig RR. When TsigGenerate is called for the first time requestMAC is set to the empty string and timersOnly is false. If something goes wrong an error is returned, otherwise it is nil.

func TsigVerify 

func TsigVerify(msg []byte, secret, requestMAC string, timersOnly bool) error

TsigVerify verifies the TSIG on a message. If the signature does not validate err contains the error, otherwise it is nil.

func UnpackDomainName 

func UnpackDomainName(msg []byte, off int) (string, int, error)

UnpackDomainName unpacks a domain name into a string.

func UnpackStruct 

func UnpackStruct(any interface{}, msg []byte, off int) (off1 int, err error)

UnpackStruct unpacks a binary message from offset off to the interface value given.

Types

type A 

type A struct {
	Hdr RR_Header
	A   net.IP `dns:"a"`
}

func (*A) Header 

func (rr *A) Header() *RR_Header

func (*A) String 

func (rr *A) String() string

type AAAA 

type AAAA struct {
	Hdr  RR_Header
	AAAA net.IP `dns:"aaaa"`
}

func (*AAAA) Header 

func (rr *AAAA) Header() *RR_Header

func (*AAAA) String 

func (rr *AAAA) String() string

type AFSDB 

type AFSDB struct {
	Hdr      RR_Header
	Subtype  uint16
	Hostname string `dns:"cdomain-name"`
}

func (*AFSDB) Header 

func (rr *AFSDB) Header() *RR_Header

func (*AFSDB) String 

func (rr *AFSDB) String() string

type ANY 

type ANY struct {
	Hdr RR_Header
}

func (*ANY) Header 

func (rr *ANY) Header() *RR_Header

func (*ANY) String 

func (rr *ANY) String() string

type CDS 

type CDS struct {
	Hdr        RR_Header
	KeyTag     uint16
	Algorithm  uint8
	DigestType uint8
	Digest     string `dns:"hex"`
}

func (*CDS) Header 

func (rr *CDS) Header() *RR_Header

func (*CDS) String 

func (rr *CDS) String() string

type CERT 

type CERT struct {
	Hdr         RR_Header
	Type        uint16
	KeyTag      uint16
	Algorithm   uint8
	Certificate string `dns:"base64"`
}

See RFC 4398.

func (*CERT) Header 

func (rr *CERT) Header() *RR_Header

func (*CERT) String 

func (rr *CERT) String() string

type CNAME 

type CNAME struct {
	Hdr    RR_Header
	Target string `dns:"cdomain-name"`
}

func (*CNAME) Header 

func (rr *CNAME) Header() *RR_Header

func (*CNAME) String 

func (rr *CNAME) String() string

type Class 

type Class uint16 // Class is a DNS class.

func (Class) String 

func (c Class) String() string

String returns the string representation for the class c.

type Client 

type Client struct {
	Net            string            // if "tcp" a TCP query will be initiated, otherwise an UDP one (default is "" for UDP)
	UDPSize        uint16            // minimum receive buffer for UDP messages
	DialTimeout    time.Duration     // net.DialTimeout (ns), defaults to 2 * 1e9
	ReadTimeout    time.Duration     // net.Conn.SetReadTimeout value for connections (ns), defaults to 2 * 1e9
	WriteTimeout   time.Duration     // net.Conn.SetWriteTimeout value for connections (ns), defaults to 2 * 1e9
	TsigSecret     map[string]string // secret(s) for Tsig map[<zonename>]<base64 secret>, zonename must be fully qualified
	SingleInflight bool              // if true suppress multiple outstanding queries for the same Qname, Qtype and Qclass
	// contains filtered or unexported fields
}

A Client defines parameters for a DNS client.

func (*Client) Exchange 

func (c *Client) Exchange(m *Msg, a string) (r *Msg, rtt time.Duration, err error)

Exchange performs an synchronous query. It sends the message m to the address contained in a and waits for an reply. Basic use pattern with a *dns.Client: 

c := new(dns.Client)
in, rtt, err := c.Exchange(message, "127.0.0.1:53")

Exchange does not retry a failed query, nor will it fall back to TCP in case of truncation.

type ClientConfig 

type ClientConfig struct {
	Servers  []string // servers to use
	Search   []string // suffixes to append to local name
	Port     string   // what port to use
	Ndots    int      // number of dots in name to trigger absolute lookup
	Timeout  int      // seconds before giving up on packet
	Attempts int      // lost packets before giving up on server, not used in the package dns
}

Wraps the contents of the /etc/resolv.conf.

func ClientConfigFromFile 

func ClientConfigFromFile(resolvconf string) (*ClientConfig, error)

ClientConfigFromFile parses a resolv.conf(5) like file and returns a *ClientConfig.

type Conn 

type Conn struct {
	net.Conn                     // a net.Conn holding the connection
	UDPSize    uint16            // minimum receive buffer for UDP messages
	TsigSecret map[string]string // secret(s) for Tsig map[<zonename>]<base64 secret>, zonename must be fully qualified
	// contains filtered or unexported fields
}

A Conn represents a connection to a DNS server.

func Dial 

func Dial(network, address string) (conn *Conn, err error)

Dial connects to the address on the named network.

func DialTimeout 

func DialTimeout(network, address string, timeout time.Duration) (conn *Conn, err error)

Dialtimeout acts like Dial but takes a timeout.

func (*Conn) Close 

func (co *Conn) Close() error

Close implements the net.Conn Close method.

func (*Conn) LocalAddr 

func (co *Conn) LocalAddr() net.Addr

LocalAddr implements the net.Conn LocalAddr method.

func (*Conn) Read 

func (co *Conn) Read(p []byte) (n int, err error)

Read implements the net.Conn read method.

func (*Conn) ReadMsg 

func (co *Conn) ReadMsg() (*Msg, error)

ReadMsg reads a message from the connection co. If the received message contains a TSIG record the transaction signature is verified.

func (*Conn) RemoteAddr 

func (co *Conn) RemoteAddr() net.Addr

RemoteAddr implements the net.Conn RemoteAddr method.

func (*Conn) SetDeadline 

func (co *Conn) SetDeadline(t time.Time) error

SetDeadline implements the net.Conn SetDeadline method.

func (*Conn) SetReadDeadline 

func (co *Conn) SetReadDeadline(t time.Time) error

SetReadDeadline implements the net.Conn SetReadDeadline method.

func (*Conn) SetWriteDeadline 

func (co *Conn) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements the net.Conn SetWriteDeadline method.

func (*Conn) Write 

func (co *Conn) Write(p []byte) (n int, err error)

Write implements the net.Conn Write method.

func (*Conn) WriteMsg 

func (co *Conn) WriteMsg(m *Msg) (err error)

WriteMsg sends a message throught the connection co. If the message m contains a TSIG record the transaction signature is calculated.

type DHCID 

type DHCID struct {
	Hdr    RR_Header
	Digest string `dns:"base64"`
}

func (*DHCID) Header 

func (rr *DHCID) Header() *RR_Header

func (*DHCID) String 

func (rr *DHCID) String() string

type DLV 

type DLV struct {
	Hdr        RR_Header
	KeyTag     uint16
	Algorithm  uint8
	DigestType uint8
	Digest     string `dns:"hex"`
}

func (*DLV) Header 

func (rr *DLV) Header() *RR_Header

func (*DLV) String 

func (rr *DLV) String() string

type DNAME 

type DNAME struct {
	Hdr    RR_Header
	Target string `dns:"domain-name"`
}

See RFC 2672.

func (*DNAME) Header 

func (rr *DNAME) Header() *RR_Header

func (*DNAME) String 

func (rr *DNAME) String() string

type DNSKEY 

type DNSKEY struct {
	Hdr       RR_Header
	Flags     uint16
	Protocol  uint8
	Algorithm uint8
	PublicKey string `dns:"base64"`
}

func (*DNSKEY) Generate 

func (r *DNSKEY) Generate(bits int) (PrivateKey, error)

Generate generates a DNSKEY of the given bit size. The public part is put inside the DNSKEY record. The Algorithm in the key must be set as this will define what kind of DNSKEY will be generated. The ECDSA algorithms imply a fixed keysize, in that case bits should be set to the size of the algorithm.

func (*DNSKEY) Header 

func (rr *DNSKEY) Header() *RR_Header

func (*DNSKEY) KeyTag 

func (k *DNSKEY) KeyTag() uint16

KeyTag calculates the keytag (or key-id) of the DNSKEY.

func (*DNSKEY) NewPrivateKey 

func (k *DNSKEY) NewPrivateKey(s string) (PrivateKey, error)

func (*DNSKEY) PrivateKeyString 

func (r *DNSKEY) PrivateKeyString(p PrivateKey) (s string)

PrivateKeyString converts a PrivateKey to a string. This string has the same format as the private-key-file of BIND9 (Private-key-format: v1.3). It needs some info from the key (hashing, keytag), so its a method of the DNSKEY.

func (*DNSKEY) ReadPrivateKey 

func (k *DNSKEY) ReadPrivateKey(q io.Reader, file string) (PrivateKey, error)

ReadPrivateKey reads a private key from the io.Reader q. The string file is only used in error reporting. The public key must be known, because some cryptographic algorithms embed the public inside the privatekey.

func (*DNSKEY) String 

func (rr *DNSKEY) String() string

func (*DNSKEY) ToDS 

func (k *DNSKEY) ToDS(h int) *DS

ToDS converts a DNSKEY record to a DS record.

type DS 

type DS struct {
	Hdr        RR_Header
	KeyTag     uint16
	Algorithm  uint8
	DigestType uint8
	Digest     string `dns:"hex"`
}

func (*DS) Header 

func (rr *DS) Header() *RR_Header

func (*DS) String 

func (rr *DS) String() string

type Denialer 

type Denialer interface {
	// Cover will check if the (unhashed) name is being covered by this NSEC or NSEC3.
	Cover(name string) bool
	// Match will check if the ownername matches the (unhashed) name for this NSEC3 or NSEC3.
	Match(name string) bool
}

type EDNS0 

type EDNS0 interface {
	// Option returns the option code for the option.
	Option() uint16

	// String returns the string representation of the option.
	String() string
	// contains filtered or unexported methods
}

EDNS0 defines an EDNS0 Option. An OPT RR can have multiple options appended to it.

type EDNS0_DAU 

type EDNS0_DAU struct {
	Code    uint16 // Always EDNS0DAU
	AlgCode []uint8
}

func (*EDNS0_DAU) Option 

func (e *EDNS0_DAU) Option() uint16

func (*EDNS0_DAU) String 

func (e *EDNS0_DAU) String() string

type EDNS0_DHU 

type EDNS0_DHU struct {
	Code    uint16 // Always EDNS0DHU
	AlgCode []uint8
}

func (*EDNS0_DHU) Option 

func (e *EDNS0_DHU) Option() uint16

func (*EDNS0_DHU) String 

func (e *EDNS0_DHU) String() string

type EDNS0_EXPIRE 

type EDNS0_EXPIRE struct {
	Code   uint16 // Always EDNS0EXPIRE
	Expire uint32
}

func (*EDNS0_EXPIRE) Option 

func (e *EDNS0_EXPIRE) Option() uint16

func (*EDNS0_EXPIRE) String 

func (e *EDNS0_EXPIRE) String() string

type EDNS0_LLQ 

type EDNS0_LLQ struct {
	Code      uint16 // Always EDNS0LLQ
	Version   uint16
	Opcode    uint16
	Error     uint16
	Id        uint64
	LeaseLife uint32
}

Long Lived Queries: http://tools.ietf.org/html/draft-sekar-dns-llq-01 Implemented for completeness, as the EDNS0 type code is assigned.

func (*EDNS0_LLQ) Option 

func (e *EDNS0_LLQ) Option() uint16

func (*EDNS0_LLQ) String 

func (e *EDNS0_LLQ) String() string

type EDNS0_N3U 

type EDNS0_N3U struct {
	Code    uint16 // Always EDNS0N3U
	AlgCode []uint8
}

func (*EDNS0_N3U) Option 

func (e *EDNS0_N3U) Option() uint16

func (*EDNS0_N3U) String 

func (e *EDNS0_N3U) String() string

type EDNS0_NSID 

type EDNS0_NSID struct {
	Code uint16 // Always EDNS0NSID
	Nsid string // This string needs to be hex encoded
}

The nsid EDNS0 option is used to retrieve a nameserver identifier. When sending a request Nsid must be set to the empty string The identifier is an opaque string encoded as hex. Basic use pattern for creating an nsid option: 

o := new(dns.OPT)
o.Hdr.Name = "."
o.Hdr.Rrtype = dns.TypeOPT
e := new(dns.EDNS0_NSID)
e.Code = dns.EDNS0NSID
e.Nsid = "AA"
o.Option = append(o.Option, e)

func (*EDNS0_NSID) Option 

func (e *EDNS0_NSID) Option() uint16

func (*EDNS0_NSID) String 

func (e *EDNS0_NSID) String() string

type EDNS0_SUBNET 

type EDNS0_SUBNET struct {
	Code          uint16 // Always EDNS0SUBNET
	Family        uint16 // 1 for IP, 2 for IP6
	SourceNetmask uint8
	SourceScope   uint8
	Address       net.IP
	DraftOption   bool // Set to true if using the old (0x50fa) option code
}

The subnet EDNS0 option is used to give the remote nameserver an idea of where the client lives. It can then give back a different answer depending on the location or network topology. Basic use pattern for creating an subnet option: 

o := new(dns.OPT)
o.Hdr.Name = "."
o.Hdr.Rrtype = dns.TypeOPT
e := new(dns.EDNS0_SUBNET)
e.Code = dns.EDNS0SUBNET
e.Family = 1	// 1 for IPv4 source address, 2 for IPv6
e.NetMask = 32	// 32 for IPV4, 128 for IPv6
e.SourceScope = 0
e.Address = net.ParseIP("127.0.0.1").To4()	// for IPv4
// e.Address = net.ParseIP("2001:7b8:32a::2")	// for IPV6
o.Option = append(o.Option, e)

func (*EDNS0_SUBNET) Option 

func (e *EDNS0_SUBNET) Option() uint16

func (*EDNS0_SUBNET) String 

func (e *EDNS0_SUBNET) String() (s string)

type EDNS0_UL 

type EDNS0_UL struct {
	Code  uint16 // Always EDNS0UL
	Lease uint32
}

The UL (Update Lease) EDNS0 (draft RFC) option is used to tell the server to set an expiration on an update RR. This is helpful for clients that cannot clean up after themselves. This is a draft RFC and more information can be found at http://files.dns-sd.org/draft-sekar-dns-ul.txt 

o := new(dns.OPT)
o.Hdr.Name = "."
o.Hdr.Rrtype = dns.TypeOPT
e := new(dns.EDNS0_UL)
e.Code = dns.EDNS0UL
e.Lease = 120 // in seconds
o.Option = append(o.Option, e)

func (*EDNS0_UL) Option 

func (e *EDNS0_UL) Option() uint16

func (*EDNS0_UL) String 

func (e *EDNS0_UL) String() string

type EID 

type EID struct {
	Hdr      RR_Header
	Endpoint string `dns:"hex"`
}

func (*EID) Header 

func (rr *EID) Header() *RR_Header

func (*EID) String 

func (rr *EID) String() string

type EUI48 

type EUI48 struct {
	Hdr     RR_Header
	Address uint64 `dns:"uint48"`
}

func (*EUI48) Header 

func (rr *EUI48) Header() *RR_Header

func (*EUI48) String 

func (rr *EUI48) String() string

type EUI64 

type EUI64 struct {
	Hdr     RR_Header
	Address uint64
}

func (*EUI64) Header 

func (rr *EUI64) Header() *RR_Header

func (*EUI64) String 

func (rr *EUI64) String() string

type Envelope 

type Envelope struct {
	RR    []RR  // The set of RRs in the answer section of the xfr reply message.
	Error error // If something went wrong, this contains the error.
}

Envelope is used when doing a zone transfer with a remote server.

type Error 

type Error struct {
	// contains filtered or unexported fields
}

Error represents a DNS error

func (*Error) Error 

func (e *Error) Error() string

type GID 

type GID struct {
	Hdr RR_Header
	Gid uint32
}

func (*GID) Header 

func (rr *GID) Header() *RR_Header

func (*GID) String 

func (rr *GID) String() string

type GPOS 

type GPOS struct {
	Hdr       RR_Header
	Longitude string
	Latitude  string
	Altitude  string
}

func (*GPOS) Header 

func (rr *GPOS) Header() *RR_Header

func (*GPOS) String 

func (rr *GPOS) String() string

type HINFO 

type HINFO struct {
	Hdr RR_Header
	Cpu string
	Os  string
}

func (*HINFO) Header 

func (rr *HINFO) Header() *RR_Header

func (*HINFO) String 

func (rr *HINFO) String() string

type HIP 

type HIP struct {
	Hdr                RR_Header
	HitLength          uint8
	PublicKeyAlgorithm uint8
	PublicKeyLength    uint16
	Hit                string   `dns:"hex"`
	PublicKey          string   `dns:"base64"`
	RendezvousServers  []string `dns:"domain-name"`
}
Example 
h := `www.example.com      IN  HIP ( 2 200100107B1A74DF365639CC39F1D578
                AwEAAbdxyhNuSutc5EMzxTs9LBPCIkOFH8cIvM4p
9+LrV4e19WzK00+CI6zBCQTdtWsuxKbWIy87UOoJTwkUs7lBu+Upr1gsNrut79ryra+bSRGQ
b1slImA8YVJyuIDsj7kwzG7jnERNqnWxZ48AWkskmdHaVDP4BcelrTI3rMXdXF5D
        rvs.example.com. )`
if hip, err := NewRR(h); err == nil {
	fmt.Printf("%s\n", hip.String())
}

Output:

www.example.com.	3600	IN	HIP	 2 200100107B1A74DF365639CC39F1D578 AwEAAbdxyhNuSutc5EMzxTs9LBPCIkOFH8cIvM4p9+LrV4e19WzK00+CI6zBCQTdtWsuxKbWIy87UOoJTwkUs7lBu+Upr1gsNrut79ryra+bSRGQb1slImA8YVJyuIDsj7kwzG7jnERNqnWxZ48AWkskmdHaVDP4BcelrTI3rMXdXF5D rvs.example.com.

func (*HIP) Header 

func (rr *HIP) Header() *RR_Header

func (*HIP) String 

func (rr *HIP) String() string

type Handler 

type Handler interface {
	ServeDNS(w ResponseWriter, r *Msg)
}

type HandlerFunc 

type HandlerFunc func(ResponseWriter, *Msg)

The HandlerFunc type is an adapter to allow the use of ordinary functions as DNS handlers. If f is a function with the appropriate signature, HandlerFunc(f) is a Handler object that calls f.

func (HandlerFunc) ServeDNS 

func (f HandlerFunc) ServeDNS(w ResponseWriter, r *Msg)

ServerDNS calls f(w, r) 

type Header struct {
	Id                                 uint16
	Bits                               uint16
	Qdcount, Ancount, Nscount, Arcount uint16
}

The wire format for the DNS packet header.

type IPSECKEY 

type IPSECKEY struct {
	Hdr         RR_Header
	Precedence  uint8
	GatewayType uint8
	Algorithm   uint8
	Gateway     string `dns:"ipseckey"`
	PublicKey   string `dns:"base64"`
}

func (*IPSECKEY) Header 

func (rr *IPSECKEY) Header() *RR_Header

func (*IPSECKEY) String 

func (rr *IPSECKEY) String() string

type KX 

type KX struct {
	Hdr        RR_Header
	Preference uint16
	Exchanger  string `dns:"domain-name"`
}

func (*KX) Header 

func (rr *KX) Header() *RR_Header

func (*KX) String 

func (rr *KX) String() string

type L32 

type L32 struct {
	Hdr        RR_Header
	Preference uint16
	Locator32  net.IP `dns:"a"`
}

func (*L32) Header 

func (rr *L32) Header() *RR_Header

func (*L32) String 

func (rr *L32) String() string

type L64 

type L64 struct {
	Hdr        RR_Header
	Preference uint16
	Locator64  uint64
}

func (*L64) Header 

func (rr *L64) Header() *RR_Header

func (*L64) String 

func (rr *L64) String() string

type LOC 

type LOC struct {
	Hdr       RR_Header
	Version   uint8
	Size      uint8
	HorizPre  uint8
	VertPre   uint8
	Latitude  uint32
	Longitude uint32
	Altitude  uint32
}

func (*LOC) Header 

func (rr *LOC) Header() *RR_Header

func (*LOC) String 

func (rr *LOC) String() string

type LP 

type LP struct {
	Hdr        RR_Header
	Preference uint16
	Fqdn       string `dns:"domain-name"`
}

func (*LP) Header 

func (rr *LP) Header() *RR_Header

func (*LP) String 

func (rr *LP) String() string

type MB 

type MB struct {
	Hdr RR_Header
	Mb  string `dns:"cdomain-name"`
}

func (*MB) Header 

func (rr *MB) Header() *RR_Header

func (*MB) String 

func (rr *MB) String() string

type MD 

type MD struct {
	Hdr RR_Header
	Md  string `dns:"cdomain-name"`
}

func (*MD) Header 

func (rr *MD) Header() *RR_Header

func (*MD) String 

func (rr *MD) String() string

type MF 

type MF struct {
	Hdr RR_Header
	Mf  string `dns:"cdomain-name"`
}

func (*MF) Header 

func (rr *MF) Header() *RR_Header

func (*MF) String 

func (rr *MF) String() string

type MG 

type MG struct {
	Hdr RR_Header
	Mg  string `dns:"cdomain-name"`
}

func (*MG) Header 

func (rr *MG) Header() *RR_Header

func (*MG) String 

func (rr *MG) String() string

type MINFO 

type MINFO struct {
	Hdr   RR_Header
	Rmail string `dns:"cdomain-name"`
	Email string `dns:"cdomain-name"`
}

func (*MINFO) Header 

func (rr *MINFO) Header() *RR_Header

func (*MINFO) String 

func (rr *MINFO) String() string

type MR 

type MR struct {
	Hdr RR_Header
	Mr  string `dns:"cdomain-name"`
}

func (*MR) Header 

func (rr *MR) Header() *RR_Header

func (*MR) String 

func (rr *MR) String() string

type MX 

type MX struct {
	Hdr        RR_Header
	Preference uint16
	Mx         string `dns:"cdomain-name"`
}
Example

Retrieve the MX records for miek.nl. 

package main

import (
	"fmt"
	"github.com/miekg/dns"
)

func main() {
	config, _ := dns.ClientConfigFromFile("/etc/resolv.conf")
	c := new(dns.Client)
	m := new(dns.Msg)
	m.SetQuestion("miek.nl.", dns.TypeMX)
	m.RecursionDesired = true
	r, _, err := c.Exchange(m, config.Servers[0]+":"+config.Port)
	if err != nil {
		return
	}
	if r.Rcode != dns.RcodeSuccess {
		return
	}
	for _, a := range r.Answer {
		if mx, ok := a.(*dns.MX); ok {
			fmt.Printf("%s\n", mx.String())
		}
	}
}

Output:

func (*MX) Header 

func (rr *MX) Header() *RR_Header

func (*MX) String 

func (rr *MX) String() string

type Msg 

type Msg struct {
	MsgHdr
	Compress bool       `json:"-"` // If true, the message will be compressed when converted to wire format. This not part of the official DNS packet format.
	Question []Question // Holds the RR(s) of the question section.
	Answer   []RR       // Holds the RR(s) of the answer section.
	Ns       []RR       // Holds the RR(s) of the authority section.
	Extra    []RR       // Holds the RR(s) of the additional section.
}

The layout of a DNS message.

func Exchange 

func Exchange(m *Msg, a string) (r *Msg, err error)

Exchange performs a synchronous UDP query. It sends the message m to the address contained in a and waits for an reply. Exchange does not retry a failed query, nor will it fall back to TCP in case of truncation. If you need to send a DNS message on an already existing connection, you can use the following: 

co := &dns.Conn{Conn: c} // c is your net.Conn
co.WriteMsg(m)
in, err  := co.ReadMsg()
co.Close()

func ExchangeConn 

func ExchangeConn(c net.Conn, m *Msg) (r *Msg, err error)

ExchangeConn performs a synchronous query. It sends the message m via the connection c and waits for a reply. The connection c is not closed by ExchangeConn. This function is going away, but can easily be mimicked: 

co := &dns.Conn{Conn: c} // c is your net.Conn
co.WriteMsg(m)
in, _  := co.ReadMsg()
co.Close()

func (*Msg) Copy 

func (dns *Msg) Copy() *Msg

Copy returns a new *Msg which is a deep-copy of dns.

func (*Msg) Insert 

func (u *Msg) Insert(rr []RR)

Insert creates a dynamic update packet that adds an complete RRset, see RFC 2136 section 2.5.1.

func (*Msg) IsEdns0 

func (dns *Msg) IsEdns0() *OPT

IsEdns0 checks if the message has a EDNS0 (OPT) record, any EDNS0 record in the additional section will do. It returns the OPT record found or nil.

func (*Msg) IsTsig 

func (dns *Msg) IsTsig() *TSIG

IsTsig checks if the message has a TSIG record as the last record in the additional section. It returns the TSIG record found or nil.

func (*Msg) Len 

func (dns *Msg) Len() int

Len returns the message length when in (un)compressed wire format. If dns.Compress is true compression it is taken into account. Len() is provided to be a faster way to get the size of the resulting packet, than packing it, measuring the size and discarding the buffer.

func (*Msg) NameNotUsed 

func (u *Msg) NameNotUsed(rr []RR)

NameNotUsed sets the RRs in the prereq section to "Name is in not use" RRs. RFC 2136 section 2.4.5.

func (*Msg) NameUsed 

func (u *Msg) NameUsed(rr []RR)

NameUsed sets the RRs in the prereq section to "Name is in use" RRs. RFC 2136 section 2.4.4.

func (*Msg) Pack 

func (dns *Msg) Pack() (msg []byte, err error)

Pack packs a Msg: it is converted to to wire format. If the dns.Compress is true the message will be in compressed wire format.

func (*Msg) PackBuffer 

func (dns *Msg) PackBuffer(buf []byte) (msg []byte, err error)

PackBuffer packs a Msg, using the given buffer buf. If buf is too small a new buffer is allocated.

func (*Msg) RRsetNotUsed 

func (u *Msg) RRsetNotUsed(rr []RR)

RRsetNotUsed sets the RRs in the prereq section to "RRset does not exist" RRs. RFC 2136 section 2.4.3.

func (*Msg) RRsetUsed 

func (u *Msg) RRsetUsed(rr []RR)

RRsetUsed sets the RRs in the prereq section to "RRset exists (value independent -- no rdata)" RRs. RFC 2136 section 2.4.1.

func (*Msg) Remove 

func (u *Msg) Remove(rr []RR)

Remove creates a dynamic update packet deletes RR from the RRSset, see RFC 2136 section 2.5.4

func (*Msg) RemoveName 

func (u *Msg) RemoveName(rr []RR)

RemoveName creates a dynamic update packet that deletes all RRsets of a name, see RFC 2136 section 2.5.3

func (*Msg) RemoveRRset 

func (u *Msg) RemoveRRset(rr []RR)

RemoveRRset creates a dynamic update packet that deletes an RRset, see RFC 2136 section 2.5.2.

func (*Msg) SetAxfr 

func (dns *Msg) SetAxfr(z string) *Msg

SetAxfr creates message for requesting an AXFR.

func (*Msg) SetEdns0 

func (dns *Msg) SetEdns0(udpsize uint16, do bool) *Msg

SetEdns0 appends a EDNS0 OPT RR to the message. TSIG should always the last RR in a message.

func (*Msg) SetIxfr 

func (dns *Msg) SetIxfr(z string, serial uint32) *Msg

SetIxfr creates message for requesting an IXFR.

func (*Msg) SetNotify 

func (dns *Msg) SetNotify(z string) *Msg

SetNotify creates a notify message.

func (*Msg) SetQuestion 

func (dns *Msg) SetQuestion(z string, t uint16) *Msg

SetQuestion creates a question message.

func (*Msg) SetRcode 

func (dns *Msg) SetRcode(request *Msg, rcode int) *Msg

SetRcode creates an error message suitable for the request.

func (*Msg) SetRcodeFormatError 

func (dns *Msg) SetRcodeFormatError(request *Msg) *Msg

SetRcodeFormatError creates a message with FormError set.

func (*Msg) SetReply 

func (dns *Msg) SetReply(request *Msg) *Msg

SetReply creates a reply message from a request message.

func (*Msg) SetTsig 

func (dns *Msg) SetTsig(z, algo string, fudge, timesigned int64) *Msg

SetTsig appends a TSIG RR to the message. This is only a skeleton TSIG RR that is added as the last RR in the additional section. The Tsig is calculated when the message is being send.

func (*Msg) SetUpdate 

func (dns *Msg) SetUpdate(z string) *Msg

SetUpdate makes the message a dynamic update message. It sets the ZONE section to: z, TypeSOA, ClassINET.

func (*Msg) String 

func (dns *Msg) String() string

Convert a complete message to a string with dig-like output.

func (*Msg) Unpack 

func (dns *Msg) Unpack(msg []byte) (err error)

Unpack unpacks a binary message to a Msg structure.

func (*Msg) Used 

func (u *Msg) Used(rr []RR)

Used sets the RRs in the prereq section to "RRset exists (value dependent -- with rdata)" RRs. RFC 2136 section 2.4.2.

type MsgHdr 

type MsgHdr struct {
	Id                 uint16
	Response           bool
	Opcode             int
	Authoritative      bool
	Truncated          bool
	RecursionDesired   bool
	RecursionAvailable bool
	Zero               bool
	AuthenticatedData  bool
	CheckingDisabled   bool
	Rcode              int
}

A manually-unpacked version of (id, bits). This is in its own struct for easy printing.

func (*MsgHdr) String 

func (h *MsgHdr) String() string

Convert a MsgHdr to a string, with dig-like headers:

;; opcode: QUERY, status: NOERROR, id: 48404

;; flags: qr aa rd ra;

type NAPTR 

type NAPTR struct {
	Hdr         RR_Header
	Order       uint16
	Preference  uint16
	Flags       string
	Service     string
	Regexp      string
	Replacement string `dns:"domain-name"`
}

func (*NAPTR) Header 

func (rr *NAPTR) Header() *RR_Header

func (*NAPTR) String 

func (rr *NAPTR) String() string

type NID 

type NID struct {
	Hdr        RR_Header
	Preference uint16
	NodeID     uint64
}

func (*NID) Header 

func (rr *NID) Header() *RR_Header

func (*NID) String 

func (rr *NID) String() string

type NIMLOC 

type NIMLOC struct {
	Hdr     RR_Header
	Locator string `dns:"hex"`
}

func (*NIMLOC) Header 

func (rr *NIMLOC) Header() *RR_Header

func (*NIMLOC) String 

func (rr *NIMLOC) String() string

type NINFO 

type NINFO struct {
	Hdr    RR_Header
	ZSData []string `dns:"txt"`
}

func (*NINFO) Header 

func (rr *NINFO) Header() *RR_Header

func (*NINFO) String 

func (rr *NINFO) String() string

type NS 

type NS struct {
	Hdr RR_Header
	Ns  string `dns:"cdomain-name"`
}

func (*NS) Header 

func (rr *NS) Header() *RR_Header

func (*NS) String 

func (rr *NS) String() string

type NSAP 

type NSAP struct {
	Hdr    RR_Header
	Length uint8
	Nsap   string
}

func (*NSAP) Header 

func (rr *NSAP) Header() *RR_Header

func (*NSAP) String 

func (rr *NSAP) String() string

type NSAPPTR 

type NSAPPTR struct {
	Hdr RR_Header
	Ptr string `dns:"domain-name"`
}

func (*NSAPPTR) Header 

func (rr *NSAPPTR) Header() *RR_Header

func (*NSAPPTR) String 

func (rr *NSAPPTR) String() string

type NSEC 

type NSEC struct {
	Hdr        RR_Header
	NextDomain string   `dns:"domain-name"`
	TypeBitMap []uint16 `dns:"nsec"`
}

func (*NSEC) Cover 

func (rr *NSEC) Cover(name string) bool

Cover implements the Denialer interface.

func (*NSEC) Header 

func (rr *NSEC) Header() *RR_Header

func (*NSEC) Match 

func (rr *NSEC) Match(name string) bool

Match implements the Denialer interface.

func (*NSEC) String 

func (rr *NSEC) String() string

type NSEC3 

type NSEC3 struct {
	Hdr        RR_Header
	Hash       uint8
	Flags      uint8
	Iterations uint16
	SaltLength uint8
	Salt       string `dns:"size-hex"`
	HashLength uint8
	NextDomain string   `dns:"size-base32"`
	TypeBitMap []uint16 `dns:"nsec"`
}

func (*NSEC3) Cover 

func (rr *NSEC3) Cover(name string) bool

Cover implements the Denialer interface.

func (*NSEC3) Header 

func (rr *NSEC3) Header() *RR_Header

func (*NSEC3) Match 

func (rr *NSEC3) Match(name string) bool

Match implements the Denialer interface.

func (*NSEC3) String 

func (rr *NSEC3) String() string

type NSEC3PARAM 

type NSEC3PARAM struct {
	Hdr        RR_Header
	Hash       uint8
	Flags      uint8
	Iterations uint16
	SaltLength uint8
	Salt       string `dns:"hex"`
}

func (*NSEC3PARAM) Header 

func (rr *NSEC3PARAM) Header() *RR_Header

func (*NSEC3PARAM) String 

func (rr *NSEC3PARAM) String() string

type Name 

type Name string // Name is a DNS domain name.

func (Name) String 

func (n Name) String() string

String returns the string representation for the name n.

type OPENPGPKEY 

type OPENPGPKEY struct {
	Hdr       RR_Header
	PublicKey string `dns:"base64"`
}

func (*OPENPGPKEY) Header 

func (rr *OPENPGPKEY) Header() *RR_Header

func (*OPENPGPKEY) String 

func (rr *OPENPGPKEY) String() string

type OPT 

type OPT struct {
	Hdr    RR_Header
	Option []EDNS0 `dns:"opt"`
}

func (*OPT) Do 

func (rr *OPT) Do() bool

Do returns the value of the DO (DNSSEC OK) bit.

func (*OPT) Header 

func (rr *OPT) Header() *RR_Header

func (*OPT) SetDo 

func (rr *OPT) SetDo()

SetDo sets the DO (DNSSEC OK) bit.

func (*OPT) SetUDPSize 

func (rr *OPT) SetUDPSize(size uint16)

SetUDPSize sets the UDP buffer size.

func (*OPT) SetVersion 

func (rr *OPT) SetVersion(v uint8)

SetVersion sets the version of EDNS. This is usually zero.

func (*OPT) String 

func (rr *OPT) String() string

func (*OPT) UDPSize 

func (rr *OPT) UDPSize() uint16

UDPSize returns the UDP buffer size.

func (*OPT) Version 

func (rr *OPT) Version() uint8

Version returns the EDNS version used. Only zero is defined.

type PTR 

type PTR struct {
	Hdr RR_Header
	Ptr string `dns:"cdomain-name"`
}

func (*PTR) Header 

func (rr *PTR) Header() *RR_Header

func (*PTR) String 

func (rr *PTR) String() string

type PX 

type PX struct {
	Hdr        RR_Header
	Preference uint16
	Map822     string `dns:"domain-name"`
	Mapx400    string `dns:"domain-name"`
}

func (*PX) Header 

func (rr *PX) Header() *RR_Header

func (*PX) String 

func (rr *PX) String() string

type ParseError 

type ParseError struct {
	// contains filtered or unexported fields
}

ParseError is a parsing error. It contains the parse error and the location in the io.Reader where the error occured.

func (*ParseError) Error 

func (e *ParseError) Error() (s string)

type PrivateKey 

type PrivateKey interface{}

Empty interface that is used as a wrapper around all possible private key implementations from the crypto package.

type PrivateRR 

type PrivateRR struct {
	Hdr  RR_Header
	Data PrivateRdata
}

PrivateRR represents an RR that uses a PrivateRdata user-defined type. It mocks normal RRs and implements dns.RR interface.

func (*PrivateRR) Header 

func (r *PrivateRR) Header() *RR_Header

func (*PrivateRR) String 

func (r *PrivateRR) String() string

type PrivateRdata 

type PrivateRdata interface {
	// String returns the text presentaton of the Rdata of the Private RR.
	String() string
	// Parse parses the Rdata of the private RR.
	Parse([]string) error
	// Pack is used when packing a private RR into a buffer.
	Pack([]byte) (int, error)
	// Unpack is used when unpacking a private RR from a buffer.
	// TODO(miek): diff. signature than Pack, see edns0.go for instance.
	Unpack([]byte) (int, error)
	// Copy copies the Rdata.
	Copy(PrivateRdata) error
	// Len returns the length in octets of the Rdata.
	Len() int
}

PrivateRdata is an interface used for implementing "Private Use" RR types, see RFC 6895. This allows one to experiment with new RR types, without requesting an official type code. Also see dns.PrivateHandle and dns.PrivateHandleRemove.

type Question 

type Question struct {
	Name   string `dns:"cdomain-name"` // "cdomain-name" specifies encoding (and may be compressed)
	Qtype  uint16
	Qclass uint16
}

DNS queries.

func (*Question) String 

func (q *Question) String() (s string)

type RFC3597 

type RFC3597 struct {
	Hdr   RR_Header
	Rdata string `dns:"hex"`
}

RFC3597 represents an unknown/generic RR.

func (*RFC3597) Header 

func (rr *RFC3597) Header() *RR_Header

func (*RFC3597) String 

func (rr *RFC3597) String() string

func (*RFC3597) ToRFC3597 

func (rr *RFC3597) ToRFC3597(r RR) error

ToRFC3597 converts a known RR to the unknown RR representation from RFC 3597.

type RKEY 

type RKEY struct {
	Hdr       RR_Header
	Flags     uint16
	Protocol  uint8
	Algorithm uint8
	PublicKey string `dns:"base64"`
}

func (*RKEY) Header 

func (rr *RKEY) Header() *RR_Header

func (*RKEY) String 

func (rr *RKEY) String() string

type RP 

type RP struct {
	Hdr  RR_Header
	Mbox string `dns:"domain-name"`
	Txt  string `dns:"domain-name"`
}

func (*RP) Header 

func (rr *RP) Header() *RR_Header

func (*RP) String 

func (rr *RP) String() string

type RR 

type RR interface {
	// Header returns the header of an resource record. The header contains
	// everything up to the rdata.
	Header() *RR_Header
	// String returns the text representation of the resource record.
	String() string
	// contains filtered or unexported methods
}

An RR represents a resource record.

func Copy 

func Copy(r RR) RR

Copy returns a new RR which is a deep-copy of r.

func NewRR 

func NewRR(s string) (RR, error)

NewRR reads the RR contained in the string s. Only the first RR is returned. The class defaults to IN and TTL defaults to 3600. The full zone file syntax like $TTL, $ORIGIN, etc. is supported. All fields of the returned RR are set, except RR.Header().Rdlength which is set to 0.

func ReadRR 

func ReadRR(q io.Reader, filename string) (RR, error)

ReadRR reads the RR contained in q. See NewRR for more documentation.

func UnpackRR 

func UnpackRR(msg []byte, off int) (rr RR, off1 int, err error)

UnpackRR unpacks msg[off:] into an RR.

type RRSIG 

type RRSIG struct {
	Hdr         RR_Header
	TypeCovered uint16
	Algorithm   uint8
	Labels      uint8
	OrigTtl     uint32
	Expiration  uint32
	Inception   uint32
	KeyTag      uint16
	SignerName  string `dns:"domain-name"`
	Signature   string `dns:"base64"`
}

func (*RRSIG) Header 

func (rr *RRSIG) Header() *RR_Header

func (*RRSIG) Sign 

func (rr *RRSIG) Sign(k PrivateKey, rrset []RR) error

Sign signs an RRSet. The signature needs to be filled in with the values: Inception, Expiration, KeyTag, SignerName and Algorithm. The rest is copied from the RRset. Sign returns true when the signing went OK, otherwise false. There is no check if RRSet is a proper (RFC 2181) RRSet. If OrigTTL is non zero, it is used as-is, otherwise the TTL of the RRset is used as the OrigTTL.

func (*RRSIG) String 

func (rr *RRSIG) String() string

func (*RRSIG) ValidityPeriod 

func (rr *RRSIG) ValidityPeriod(t time.Time) bool

ValidityPeriod uses RFC1982 serial arithmetic to calculate if a signature period is valid. If t is the zero time, the current time is taken other t is.

func (*RRSIG) Verify 

func (rr *RRSIG) Verify(k *DNSKEY, rrset []RR) error

Verify validates an RRSet with the signature and key. This is only the cryptographic test, the signature validity period must be checked separately. This function copies the rdata of some RRs (to lowercase domain names) for the validation to work.

type RR_Header 

type RR_Header struct {
	Name     string `dns:"cdomain-name"`
	Rrtype   uint16
	Class    uint16
	Ttl      uint32
	Rdlength uint16 // length of data after header
}

DNS resource records. There are many types of RRs, but they all share the same header.

func (*RR_Header) Header 

func (h *RR_Header) Header() *RR_Header

func (*RR_Header) String 

func (h *RR_Header) String() string

type RT 

type RT struct {
	Hdr        RR_Header
	Preference uint16
	Host       string `dns:"cdomain-name"`
}

func (*RT) Header 

func (rr *RT) Header() *RR_Header

func (*RT) String 

func (rr *RT) String() string

type ResponseWriter 

type ResponseWriter interface {
	// LocalAddr returns the net.Addr of the server
	LocalAddr() net.Addr
	// RemoteAddr returns the net.Addr of the client that sent the current request.
	RemoteAddr() net.Addr
	// WriteMsg writes a reply back to the client.
	WriteMsg(*Msg) error
	// Write writes a raw buffer back to the client.
	Write([]byte) (int, error)
	// Close closes the connection.
	Close() error
	// TsigStatus returns the status of the Tsig.
	TsigStatus() error
	// TsigTimersOnly sets the tsig timers only boolean.
	TsigTimersOnly(bool)
	// Hijack lets the caller take over the connection.
	// After a call to Hijack(), the DNS package will not do anything with the connection.
	Hijack()
}

A ResponseWriter interface is used by an DNS handler to construct an DNS response.

type SOA 

type SOA struct {
	Hdr     RR_Header
	Ns      string `dns:"cdomain-name"`
	Mbox    string `dns:"cdomain-name"`
	Serial  uint32
	Refresh uint32
	Retry   uint32
	Expire  uint32
	Minttl  uint32
}
Example 
s := "example.com. 1000 SOA master.example.com. admin.example.com. 1 4294967294 4294967293 4294967295 100"
if soa, err := NewRR(s); err == nil {
	fmt.Printf("%s\n", soa.String())
}

Output:

example.com.	1000	IN	SOA	master.example.com. admin.example.com. 1 4294967294 4294967293 4294967295 100

func (*SOA) Header 

func (rr *SOA) Header() *RR_Header

func (*SOA) String 

func (rr *SOA) String() string

type SPF 

type SPF struct {
	Hdr RR_Header
	Txt []string `dns:"txt"`
}

func (*SPF) Header 

func (rr *SPF) Header() *RR_Header

func (*SPF) String 

func (rr *SPF) String() string

type SRV 

type SRV struct {
	Hdr      RR_Header
	Priority uint16
	Weight   uint16
	Port     uint16
	Target   string `dns:"domain-name"`
}

func (*SRV) Header 

func (rr *SRV) Header() *RR_Header

func (*SRV) String 

func (rr *SRV) String() string

type SSHFP 

type SSHFP struct {
	Hdr         RR_Header
	Algorithm   uint8
	Type        uint8
	FingerPrint string `dns:"hex"`
}

func (*SSHFP) Header 

func (rr *SSHFP) Header() *RR_Header

func (*SSHFP) String 

func (rr *SSHFP) String() string

type ServeMux 

type ServeMux struct {
	// contains filtered or unexported fields
}

ServeMux is an DNS request multiplexer. It matches the zone name of each incoming request against a list of registered patterns add calls the handler for the pattern that most closely matches the zone name. ServeMux is DNSSEC aware, meaning that queries for the DS record are redirected to the parent zone (if that is also registered), otherwise the child gets the query. ServeMux is also safe for concurrent access from multiple goroutines.

func NewServeMux 

func NewServeMux() *ServeMux

NewServeMux allocates and returns a new ServeMux.

func (*ServeMux) Handle 

func (mux *ServeMux) Handle(pattern string, handler Handler)

Handle adds a handler to the ServeMux for pattern.

func (*ServeMux) HandleFunc 

func (mux *ServeMux) HandleFunc(pattern string, handler func(ResponseWriter, *Msg))

Handle adds a handler to the ServeMux for pattern.

func (*ServeMux) HandleRemove 

func (mux *ServeMux) HandleRemove(pattern string)

HandleRemove deregistrars the handler specific for pattern from the ServeMux.

func (*ServeMux) ServeDNS 

func (mux *ServeMux) ServeDNS(w ResponseWriter, request *Msg)

ServeDNS dispatches the request to the handler whose pattern most closely matches the request message. If DefaultServeMux is used the correct thing for DS queries is done: a possible parent is sought. If no handler is found a standard SERVFAIL message is returned If the request message does not have exactly one question in the question section a SERVFAIL is returned.

type Server 

type Server struct {
	// Address to listen on, ":dns" if empty.
	Addr string
	// if "tcp" it will invoke a TCP listener, otherwise an UDP one.
	Net string
	// TCP Listener to use, this is to aid in systemd's socket activation.
	Listener net.Listener
	// UDP "Listener" to use, this is to aid in systemd's socket activation.
	PacketConn net.PacketConn
	// Handler to invoke, dns.DefaultServeMux if nil.
	Handler Handler
	// Default buffer size to use to read incoming UDP messages. If not set
	// it defaults to MinMsgSize (512 B).
	UDPSize int
	// The net.Conn.SetReadTimeout value for new connections, defaults to 2 * time.Second.
	ReadTimeout time.Duration
	// The net.Conn.SetWriteTimeout value for new connections, defaults to 2 * time.Second.
	WriteTimeout time.Duration
	// TCP idle timeout for multiple queries, if nil, defaults to 8 * time.Second (RFC 5966).
	IdleTimeout func() time.Duration
	// Secret(s) for Tsig map[<zonename>]<base64 secret>.
	TsigSecret map[string]string
	// contains filtered or unexported fields
}

A Server defines parameters for running an DNS server.

func (*Server) ActivateAndServe 

func (srv *Server) ActivateAndServe() error

ActivateAndServe starts a nameserver with the PacketConn or Listener configured in *Server. Its main use is to start a server from systemd.

func (*Server) ListenAndServe 

func (srv *Server) ListenAndServe() error

ListenAndServe starts a nameserver on the configured address in *Server.

func (*Server) Shutdown 

func (srv *Server) Shutdown() error

Shutdown gracefully shuts down a server. After a call to Shutdown, ListenAndServe and ActivateAndServe will return. All in progress queries are completed before the server is taken down. If the Shutdown is taking longer than the reading timeout and error is returned.

type TA 

type TA struct {
	Hdr        RR_Header
	KeyTag     uint16
	Algorithm  uint8
	DigestType uint8
	Digest     string `dns:"hex"`
}

func (*TA) Header 

func (rr *TA) Header() *RR_Header

func (*TA) String 

func (rr *TA) String() string
type TALINK struct {
	Hdr          RR_Header
	PreviousName string `dns:"domain-name"`
	NextName     string `dns:"domain-name"`
}

func (*TALINK) Header 

func (rr *TALINK) Header() *RR_Header

func (*TALINK) String 

func (rr *TALINK) String() string

type TKEY 

type TKEY struct {
	Hdr        RR_Header
	Algorithm  string `dns:"domain-name"`
	Inception  uint32
	Expiration uint32
	Mode       uint16
	Error      uint16
	KeySize    uint16
	Key        string
	OtherLen   uint16
	OtherData  string
}

func (*TKEY) Header 

func (rr *TKEY) Header() *RR_Header

func (*TKEY) String 

func (rr *TKEY) String() string

type TLSA 

type TLSA struct {
	Hdr          RR_Header
	Usage        uint8
	Selector     uint8
	MatchingType uint8
	Certificate  string `dns:"hex"`
}

func (*TLSA) Header 

func (rr *TLSA) Header() *RR_Header

func (*TLSA) Sign 

func (r *TLSA) Sign(usage, selector, matchingType int, cert *x509.Certificate) (err error)

Sign creates a TLSA record from an SSL certificate.

func (*TLSA) String 

func (rr *TLSA) String() string

func (*TLSA) Verify 

func (r *TLSA) Verify(cert *x509.Certificate) error

Verify verifies a TLSA record against an SSL certificate. If it is OK a nil error is returned.

type TSIG 

type TSIG struct {
	Hdr        RR_Header
	Algorithm  string `dns:"domain-name"`
	TimeSigned uint64 `dns:"uint48"`
	Fudge      uint16
	MACSize    uint16
	MAC        string `dns:"size-hex"`
	OrigId     uint16
	Error      uint16
	OtherLen   uint16
	OtherData  string `dns:"size-hex"`
}

func (*TSIG) Header 

func (rr *TSIG) Header() *RR_Header

func (*TSIG) String 

func (rr *TSIG) String() string

type TXT 

type TXT struct {
	Hdr RR_Header
	Txt []string `dns:"txt"`
}

func (*TXT) Header 

func (rr *TXT) Header() *RR_Header

func (*TXT) String 

func (rr *TXT) String() string

type Token 

type Token struct {
	RR                  // the scanned resource record when error is not nil
	Error   *ParseError // when an error occured, this has the error specifics
	Comment string      // a potential comment positioned after the RR and on the same line
}

*Tokens are returned when a zone file is parsed.

type Transfer 

type Transfer struct {
	*Conn
	DialTimeout  time.Duration     // net.DialTimeout (ns), defaults to 2 * 1e9
	ReadTimeout  time.Duration     // net.Conn.SetReadTimeout value for connections (ns), defaults to 2 * 1e9
	WriteTimeout time.Duration     // net.Conn.SetWriteTimeout value for connections (ns), defaults to 2 * 1e9
	TsigSecret   map[string]string // Secret(s) for Tsig map[<zonename>]<base64 secret>, zonename must be fully qualified
	// contains filtered or unexported fields
}

A Transfer defines parameters that are used during a zone transfer.

func (*Transfer) In 

func (t *Transfer) In(q *Msg, a string) (env chan *Envelope, err error)

In performs an incoming transfer with the server in a.

func (*Transfer) Out 

func (t *Transfer) Out(w ResponseWriter, q *Msg, ch chan *Envelope) error

Out performs an outgoing transfer with the client connecting in w. Basic use pattern: 

ch := make(chan *dns.Envelope)
tr := new(dns.Transfer)
tr.Out(w, r, ch)
c <- &dns.Envelope{RR: []dns.RR{soa, rr1, rr2, rr3, soa}}
close(ch)
w.Hijack()
// w.Close() // Client closes connection

The server is responsible for sending the correct sequence of RRs through the channel ch.

func (*Transfer) ReadMsg 

func (t *Transfer) ReadMsg() (*Msg, error)

ReadMsg reads a message from the transfer connection t.

func (*Transfer) WriteMsg 

func (t *Transfer) WriteMsg(m *Msg) (err error)

WriteMsg writes a message through the transfer connection t.

type Type 

type Type uint16 // Type is a DNS type.

func (Type) String 

func (t Type) String() string

String returns the string representation for the type t.

type UID 

type UID struct {
	Hdr RR_Header
	Uid uint32
}

func (*UID) Header 

func (rr *UID) Header() *RR_Header

func (*UID) String 

func (rr *UID) String() string

type UINFO 

type UINFO struct {
	Hdr   RR_Header
	Uinfo string
}

func (*UINFO) Header 

func (rr *UINFO) Header() *RR_Header

func (*UINFO) String 

func (rr *UINFO) String() string

type URI 

type URI struct {
	Hdr      RR_Header
	Priority uint16
	Weight   uint16
	Target   []string `dns:"txt"`
}

func (*URI) Header 

func (rr *URI) Header() *RR_Header

func (*URI) String 

func (rr *URI) String() string

type WKS 

type WKS struct {
	Hdr      RR_Header
	Address  net.IP `dns:"a"`
	Protocol uint8
	BitMap   []uint16 `dns:"wks"`
}

func (*WKS) Header 

func (rr *WKS) Header() *RR_Header

func (*WKS) String 

func (rr *WKS) String() (s string)

type X25 

type X25 struct {
	Hdr         RR_Header
	PSDNAddress string
}

func (*X25) Header 

func (rr *X25) Header() *RR_Header

func (*X25) String 

func (rr *X25) String() string

Source Files

View all Source files

Directories

Path Synopsis
Package idn implements encoding from and to punycode as speficied by RFC 3492.
 Package idn implements encoding from and to punycode as speficied by RFC 3492.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.