sqs

package
v1.4.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 10, 2024 License: Apache-2.0 Imports: 17 Imported by: 3

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type SQS 

type SQS struct {
	// define the AWS region that SQS is located at
	AwsRegion awsregion.AWSRegion

	// custom http2 client options
	HttpOptions *awshttp2.HttpClientSettings
	// contains filtered or unexported fields
}

SQS struct encapsulates the AWS SQS access functionality

func (*SQS) ChangeMessageVisibility 

func (s *SQS) ChangeMessageVisibility(queueUrl string,
	receiptHandle string,
	visibilityTimeOutSeconds int64,
	timeOutDuration ...time.Duration) (err error)

ChangeMessageVisibility will update a message's visibility time out seconds, the message's receiptHandle is used along with queueUrl to identify which message in which queue is to be updated the new timeout value

func (*SQS) ChangeMessageVisibilityBatch 

func (s *SQS) ChangeMessageVisibilityBatch(queueUrl string,
	messageEntries []*SQSChangeVisibilityRequest,
	timeOutDuration ...time.Duration) (successIDsList []string, failedList []*SQSFailResult, err error)

ChangeMessageVisibilityBatch will update up to 10 messages' visibility time out values in a batch

func (*SQS) Connect 

func (s *SQS) Connect(parentSegment ...*xray.XRayParentSegment) (err error)

Connect will establish a connection to the SQS service

func (*SQS) CreateQueue 

func (s *SQS) CreateQueue(queueName string,
	attributes map[sqscreatequeueattribute.SQSCreateQueueAttribute]string,
	timeOutDuration ...time.Duration) (queueUrl string, err error)

CreateQueue will create a queue in SQS, if Queue is a FIFO, then queueName must suffix with .fifo, otherwise name it without .fifo suffix

Parameters:

  1. queueName = required, up to 80 characters alpha-numeric and dash, case-sensitive if fifo queue, must suffix name with '.fifo' (fifo queue guarantees fifo and delivery once but only 300 / second rate)
  2. attributes = optional, map of create queue attribute key value pairs
  3. timeOutDuration = optional, time out duration to use for context if applicable

Return Values:

  1. queueUrl = the queue url after queue was created
  2. err = error info if any

Create Queue Attributes: (Key = Expected Value) 

  The following lists the names, descriptions, and values of the special request parameters that the CreateQueue action uses:
		1) DelaySeconds = The length of time, in seconds, for which the delivery of all messages in the queue is delayed.
						  Valid values: An integer from 0 to 900 seconds (15 minutes). Default: 0.
		2）MaximumMessageSize = The limit of how many bytes a message can contain before Amazon SQS rejects it.
								Valid values: An integer from 1,024 bytes (1 KiB) to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).
		3) MessageRetentionPeriod = The length of time, in seconds, for which Amazon SQS retains a message.
									Valid values: An integer from 60 seconds (1 minute) to 1,209,600 seconds (14 days). Default: 345,600 (4 days).
		4) Policy = The queue's policy. A valid AWS policy.
					For more information about policy structure,
						see Overview of AWS IAM Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html)
						in the Amazon IAM User Guide.
		5) ReceiveMessageWaitTimeSeconds = The length of time, in seconds, for which a ReceiveMessage action waits for a message to arrive.
										   Valid values: An integer from 0 to 20 (seconds). Default: 0.
		6) RedrivePolicy = The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object.
						   For more information about the redrive policy and dead-letter queues,
						   		see Using Amazon SQS Dead-Letter Queues (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html)
						   		in the Amazon Simple Queue Service Developer Guide.
		7) deadLetterTargetArn = The Amazon Resource Name (ARN) of the dead-letter queue,
								 to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
		8) maxReceiveCount = The number of times a message is delivered to the source queue before being moved to the dead-letter queue.
							 When the ReceiveCount for a message exceeds the maxReceiveCount for a queue,
							 	Amazon SQS moves the message to the dead-letter-queue.
							 The dead-letter queue of a FIFO queue must also be a FIFO queue.
							 Similarly, the dead-letter queue of a standard queue must also be a standard queue.
		9) VisibilityTimeout = The visibility timeout for the queue, in seconds.
							   Valid values: An integer from 0 to 43,200 (12 hours). Default: 30.
							   For more information about the visibility timeout,
							   		see Visibility Timeout (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html)
							   		in the Amazon Simple Queue Service Developer Guide.

  The following attributes apply only to server-side-encryption,
  (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html):
		10) KmsMasterKeyId = The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK.
							 For more information, see Key Terms (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms).
							 While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs,
							 	the alias of a custom CMK can, for example, be alias/MyAlias .
							 For more examples, see KeyId (https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters)
							 	in the AWS Key Management Service API Reference.
		11）KmsDataKeyReusePeriodSeconds = The length of time, in seconds, for which Amazon SQS can reuse a data key (https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys)
										   		to encrypt or decrypt messages before calling AWS KMS again.
										   An integer representing seconds,
											   between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes).
										   A shorter time period provides better security but results in more calls to KMS,
										   		which might incur charges after Free Tier.
										   For more information, see How Does the Data Key Reuse Period Work?
											   (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work).

  The following attributes apply only to FIFO (first-in-first-out) queues,
  (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html):
	 	12) FifoQueue = (AT NEW QUEUE CREATION ONLY) Designates a queue as FIFO. Valid values: true, false.
						If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
						You can provide this attribute only during queue creation. You can't change it for an existing queue.
						When you set this attribute, you must also provide the MessageGroupId for your messages explicitly.
						For more information, see FIFO Queue Logic
							(https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic)
							in the Amazon Simple Queue Service Developer Guide.
		13) ContentBasedDeduplication = Enables content-based deduplication. Valid values: true, false.
										For more information, see Exactly-Once Processing
											(https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing)
											in the Amazon Simple Queue Service Developer Guide.
										Every message must have a unique MessageDeduplicationId, You may provide a MessageDeduplicationId explicitly.
										If you aren't able to provide a MessageDeduplicationId
											and you enable ContentBasedDeduplication for your queue,
											Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId
											using the body of the message (but not the attributes of the message).
										If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set,
											the action fails with an error.
										If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
										When ContentBasedDeduplication is in effect,
											messages with identical content sent within the deduplication interval are treated as duplicates,
											and only one copy of the message is delivered.
										If you send one message with ContentBasedDeduplication enabled,
											and then another message with a MessageDeduplicationId that is the same as the one generated,
											for the first MessageDeduplicationId, the two messages are treated as duplicates,
											and only one copy of the message is delivered.

func (*SQS) DeleteMessage 

func (s *SQS) DeleteMessage(queueUrl string,
	receiptHandle string,
	timeOutDuration ...time.Duration) (err error)

DeleteMessage will delete a message from sqs queue based on receiptHandle and queueUrl specified

func (*SQS) DeleteMessageBatch 

func (s *SQS) DeleteMessageBatch(queueUrl string,
	messageEntries []*SQSDeleteMessageRequest,
	timeOutDuration ...time.Duration) (successIDsList []string, failedList []*SQSFailResult, err error)

DeleteMessageBatch will delete up to 10 messages from given queue by queueUrl and message receiptHandles

func (*SQS) DeleteQueue 

func (s *SQS) DeleteQueue(queueUrl string, timeOutDuration ...time.Duration) (err error)

DeleteQueue will delete the given SQS queue based on the queueUrl, there is a 60 second backoff time for the queue deletion to complete, do not send more messages to the queue within the 60 second deletion window of time

queueUrl = required, case-sensitive

func (*SQS) Disconnect 

func (s *SQS) Disconnect()

Disconnect will clear sqs client

func (*SQS) GetQueueArnFromQueue added in v1.0.3 

func (s *SQS) GetQueueArnFromQueue(queueUrl string, timeoutDuration ...time.Duration) (arn string, err error)

GetQueueArnFromQueueUrl encodes arn from url data

func (*SQS) GetQueueAttributes 

func (s *SQS) GetQueueAttributes(queueUrl string,
	attributeNames []sqsgetqueueattribute.SQSGetQueueAttribute,
	timeOutDuration ...time.Duration) (attributes map[sqsgetqueueattribute.SQSGetQueueAttribute]string, err error)

GetQueueAttributes will retrieve queue attributes for a given queueUrl, filtered by the attributeNames slice parameter

Parameters:

  1. queueUrl = required, the queue url for which queue attributes are retrieved against, case-sensitive
  2. attributeNames = required, slice of attribute names to filter attributes for (see notes below for allowed attribute name values)
  3. timeOutDuration = optional, timeout duration for context if applicable

Return Values:

  1. attributes = map of get queue attributes key value pairs retrieved
  2. err = error info if any

Get Queue Attributes: (Key = Expected Value)

  1. All = Returns all values.

  2. ApproximateNumberOfMessages = Returns the approximate number of messages available for retrieval from the queue.

  3. ApproximateNumberOfMessagesDelayed = Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.

  4. ApproximateNumberOfMessagesNotVisible = Returns the approximate number of messages that are in flight. Messages are considered to be in flight if they have been sent to a client but have not yet been deleted, or have not yet reached the end of their visibility window.

  5. CreatedTimestamp = Returns the time when the queue was created in seconds (epoch time (http://en.wikipedia.org/wiki/Unix_time)).

  6. DelaySeconds = Returns the default delay on the queue in seconds.

  7. LastModifiedTimestamp = Returns the time when the queue was last changed in seconds (epoch time (http://en.wikipedia.org/wiki/Unix_time)).

  8. MaximumMessageSize = Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.

  9. MessageRetentionPeriod = Returns the length of time, in seconds, for which Amazon SQS retains a message.

  10. Policy = Returns the policy of the queue.

  11. QueueArn = Returns the Amazon resource name (ARN) of the queue.

  12. ReceiveMessageWaitTimeSeconds = Returns the length of time, in seconds, for which the ReceiveMessage action waits for a message to arrive.

  13. RedrivePolicy = The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html) in the Amazon Simple Queue Service Developer Guide.

  14. deadLetterTargetArn = The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.

  15. maxReceiveCount = The number of times a message is delivered to the source queue before being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.

  16. VisibilityTimeout = Returns the visibility timeout for the queue. For more information about the visibility timeout, see Visibility Timeout (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html) in the Amazon Simple Queue Service Developer Guide.

    The following attributes apply only to server-side-encryption (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html):

  17. KmsMasterKeyId = Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms). 18）KmsDataKeyReusePeriodSeconds = Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work? (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work).

    The following attributes apply only to FIFO (first-in-first-out) queues (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html):

  18. FifoQueue = Returns whether the queue is FIFO. For more information, see FIFO Queue Logic (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic) in the Amazon Simple Queue Service Developer Guide. To determine whether a queue is FIFO (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html), you can check whether QueueName ends with the .fifo suffix.

  19. ContentBasedDeduplication = Returns whether content-based deduplication is enabled for the queue. For more information, see Exactly-Once Processing (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing) in the Amazon Simple Queue Service Developer Guide.

func (*SQS) GetQueueUrl 

func (s *SQS) GetQueueUrl(queueName string, timeOutDuration ...time.Duration) (queueUrl string, notFound bool, err error)

GetQueueUrl returns the queue url for specific SQS queue

queueName = required, case-sensitive

func (*SQS) ListDeadLetterSourceQueues 

func (s *SQS) ListDeadLetterSourceQueues(queueUrl string,
	nextToken string,
	maxResults int64,
	timeOutDuration ...time.Duration) (queueUrlsList []string, moreQueueUrlsNextToken string, err error)

ListDeadLetterSourceQueues will retrieve a list of source queue urls, that have its RedrivePolicy set to the given Dead Letter Queue as specified in queueUrl parameter

Parameters:

  1. queueUrl= required, the dead letter queue url for which to list the dead letter source queues, case-sensitive
  2. nextToken = optional, if the prior call to ListDeadLetterSourceQueues expected more values, a more...token is returned, to be used in this parameter
  3. maxResults = optional, if > 0, the maximum results limited to
  4. timeOutDuration = optional, timeout value to use within context

Return Values:

  1. queueUrlsList = string slice of source queue urls that points to the dead letter queue as indicated in queueUrl parameter
  2. moreQueueUrlsNextToken = if more queue urls expected, use this token in the next method call by passing into nextToken parameter
  3. err = error info if any

func (*SQS) ListQueues 

func (s *SQS) ListQueues(queueNamePrefix string,
	nextToken string,
	maxResults int64,
	timeOutDuration ...time.Duration) (queueUrlsList []string, moreQueueUrlsNextToken string, err error)

ListQueues will return a string slice of queue Urls

Parameters:

  1. queueNamePrefix = optional, match queues based on the queue name that starts with the specified prefix value, case-sensitive
  2. nextToken = optional, if the prior call to ListQueues expected more values, a more...token is returned, to be used in this parameter
  3. maxResults = optional, if > 0, the maximum results limited to
  4. timeOutDuration = optional, timeout value to use within context

Return Values:

  1. queueUrlsList = string slice of queue urls
  2. moreQueueUrlsNextToken = if more queue urls expected, use this token in the next method call by passing into nextToken parameter
  3. err = error info if any

func (*SQS) PurgeQueue 

func (s *SQS) PurgeQueue(queueUrl string, timeOutDuration ...time.Duration) (err error)

PurgeQueue will delete all messages within the SQS queue indicated by the queueUrl, deletion of messages will take up to 60 seconds, it is advisable to wait 60 seconds before attempting to use the queue again (to ensure purge completion)

queueUrl = required, case-sensitive

func (*SQS) ReceiveMessage 

func (s *SQS) ReceiveMessage(queueUrl string,
	maxNumberOfMessages int64,
	messageAttributeNames []string,
	systemAttributeNames []sqssystemattribute.SQSSystemAttribute,
	visibilityTimeOutSeconds int64,
	waitTimeSeconds int64,
	receiveRequestAttemptId string,
	timeOutDuration ...time.Duration) (messagesList []*SQSReceivedMessage, err error)

ReceiveMessage will retrieve 1 or more (up to 10) messages from the SQS (standard or fifo) queue indicated by queueUrl, note that this method retrieves the message(s), and blocks them from other consumer view for a short time, but does not delete such messages, to delete the messages, consumer must call the DeleteMessage methods accordingly

Parameters:

  1. queueUrl = required, retrieve message(s) from this queue as indicated by queueUrl, either standard or fifo queue, case-sensitive
  2. maxNumberOfMessages = required, valid value is 1 - 10, indicates the maximum number of messages to retrieve during the method call
  3. messageAttributeNames = optional, string slice of message attribute names to retrieve as related to the received messages. Attribute names are case-sensitive, alphanumeric, -, _, . are allowed. To receive all message attributes, use filter name as 'All' or '.*'. To receive all message attributes with a prefix pattern, use filter name as 'xyz.*', where attribute names prefix with xyz are included in the return list.
  4. systemAttributeNames = optional, string slice of system attribute names to retrieve as related to the received messages. Attribute names are case-sensitive, alphanumeric, -, _, . are allowed. Key-Value Pairs: a) All = Return all system attributes and values. b) ApproximateFirstReceiveTimestamp = Returns the time the message was first received from the queue in milliseconds. (epoch time (http://en.wikipedia.org/wiki/Unix_time) c) ApproximateReceiveCount = Returns the number of times a message has been received across all queues but not deleted. d) AWSTraceHeader = Returns the AWS X-Ray trace header string. e) SenderId = For an IAM user, returns the IAM user ID, for example ABCDEFGHI1JKLMNOPQ23R. For an IAM role, returns the IAM role ID, for example ABCDE1F2GH3I4JK5LMNOP:i-a123b456. f) SentTimestamp = Returns the time the message was sent to the queue, Epoch time = http://en.wikipedia.org/wiki/Unix_time in milliseconds. g) MessageDeduplicationId = Returns the value provided by the producer that calls the SendMessage action. h) MessageGroupId = Returns the value provided by the producer that calls the SendMessage action. Messages with the same MessageGroupId are returned in sequence. i) SequenceNumber = Returns the value provided by Amazon SQS.
  5. visibilityTimeOutSeconds = optional, The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request.
  6. waitTimeSeconds = optional, The duration (in seconds) for which the call waits for a message to arrive in the queue before returning. If a message is available, the call returns sooner than WaitTimeSeconds. If no messages are available and the wait time expires, the call returns successfully with an empty list of messages. To avoid HTTP errors, ensure that the HTTP response timeout for ReceiveMessage requests is longer than the WaitTimeSeconds parameter.
  7. receiveRequestAttemptId = optional, applies to FIFO queue ONLY. The token used for deduplication of ReceiveMessage calls. If a networking issue occurs after a ReceiveMessage action, and instead of a response you receive a generic error. It is possible to retry the same action with an identical ReceiveRequestAttemptId, to retrieve the same set of messages, even if their visibility timeout has not yet expired.

More About FIFO's receiveRequestAttemptId: 

a) You can use ReceiveRequestAttemptId only for 5 minutes after a ReceiveMessage action.
b) When you set FifoQueue, a caller of the ReceiveMessage action can provide a ReceiveRequestAttemptId explicitly.
c) If a caller of the ReceiveMessage action doesn't provide a ReceiveRequestAttemptId, Amazon SQS generates a ReceiveRequestAttemptId.
d) It is possible to retry the ReceiveMessage action with the same ReceiveRequestAttemptId,
		if none of the messages have been modified (deleted or had their visibility changes).
e) During a visibility timeout, subsequent calls with the same ReceiveRequestAttemptId return the same messages and receipt handles.
		If a retry occurs within the deduplication interval, it resets the visibility timeout.
		For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
			(https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html)
		If a caller of the ReceiveMessage action still processes messages when the visibility timeout expires
			and messages become visible, another worker consuming from the same queue can receive the same messages
			and therefore process duplicates.
		Also, if a consumer whose message processing time is longer than the visibility timeout tries to delete the processed messages,
			the action fails with an error. To mitigate this effect, ensure that your application observes
			a safe threshold before the visibility timeout expires and extend the visibility timeout as necessary.
f) While messages with a particular MessageGroupId are invisible,
		no more messages belonging to the same MessageGroupId are returned until the visibility timeout expires.
		You can still receive messages with another MessageGroupId as long as it is also visible.
g) If a caller of ReceiveMessage can't track the ReceiveRequestAttemptId, no retries work until the original visibility timeout expires.
		As a result, delays might occur but the messages in the queue remain in a strict order.
h) The maximum length of ReceiveRequestAttemptId is 128 characters.
		ReceiveRequestAttemptId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).
i) For best practices of using ReceiveRequestAttemptId,
		see Using the ReceiveRequestAttemptId Request Parameter in the Amazon Simple Queue Service Developer Guide.
		(https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-receiverequestattemptid-request-parameter.html)

func (*SQS) SendMessage 

func (s *SQS) SendMessage(queueUrl string,
	messageBody string,
	messageAttributes map[string]*awssqs.MessageAttributeValue,
	delaySeconds int64,
	timeOutDuration ...time.Duration) (result *SQSMessageResult, err error)

SendMessage will send a standard message to SQS standard queue via queue url

Parameters:

  1. queueUrl = required, the queue to send message to
  2. messageBody = required, the message to send to the queue
  3. messageAttributes = optional, map of message attribute key value pairs. Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS Message Attributes: (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html) in the Amazon Simple Queue Service Developer Guide. Example: use message attributes to define meta data about the message being sent: a) { "Title": { DataType: "String", StringValue: "The Whistler"}, "Author": { DataType: "String", StringValue: "John Grisham"}, "WeeksOn": { DataType: "Number", StringValue: "6"} }
  4. delaySeconds = optional, if greater than 0, indicates how many seconds to delay before message is available to consumers
  5. timeOutDuration = optional, timeout value for context if any

Return Values:

  1. result = struct containing Send... action message result
  2. err = error info if any

func (*SQS) SendMessageBatch 

func (s *SQS) SendMessageBatch(queueUrl string,
	messageEntries []*SQSStandardMessage,
	timeOutDuration ...time.Duration) (successList []*SQSSuccessResult, failedList []*SQSFailResult, err error)

SendMessageBatch will send up to 10 standard messages in a batch to SQS standard queue as indicated by queueUrl

func (*SQS) SendMessageBatchFifo 

func (s *SQS) SendMessageBatchFifo(queueUrl string,
	messageEntries []*SQSFifoMessage,
	timeOutDuration ...time.Duration) (successList []*SQSSuccessResult, failedList []*SQSFailResult, err error)

SendMessageBatchFifo will send up to 10 fifo messages in a batch to SQS fifo queue as indicated by queueUrl

func (*SQS) SendMessageFifo 

func (s *SQS) SendMessageFifo(queueUrl string,
	messageDeduplicationId string,
	messageGroupId string,
	messageBody string,
	messageAttributes map[string]*awssqs.MessageAttributeValue,
	timeOutDuration ...time.Duration) (result *SQSMessageResult, err error)

SendMessageFifo will send a fifo message to SQS fifo queue via queue url

Parameters:

  1. queueUrl = required, the queue to send message to
  2. messageDeduplicationId = required, The token used for deduplication of sent messages. If a message with a particular MessageDeduplicationId is sent successfully, any messages sent with the same MessageDeduplicationId are accepted successfully but aren't delivered during the 5-minute deduplication interval. For more information, see Exactly-Once Processing (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing) in the Amazon Simple Queue Service Developer Guide. Every message must have a unique MessageDeduplicationId, You may provide a MessageDeduplicationId explicitly. If you aren't able to provide a MessageDeduplicationId, and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId, using the body of the message (but not the attributes of the message). If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error. If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one. When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered. If you send one message with ContentBasedDeduplication enabled， and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered. The MessageDeduplicationId is available to the consumer of the message， (this can be useful for troubleshooting delivery issues). If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages. Amazon SQS continues to keep track of the message deduplication ID， even after the message is received and deleted. The maximum length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagededuplicationid-property.html) in the Amazon Simple Queue Service Developer Guide.
  3. messageGroupId = required, The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner, however, messages in different message groups might be processed out of order. To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion. You must associate a non-empty MessageGroupId with a message, if you don't provide a MessageGroupId, the action fails. ReceiveMessage might return messages with multiple MessageGroupId values, For each MessageGroupId, the messages are sorted by time sent, The caller can't specify a MessageGroupId. The length of MessageGroupId is 128 characters, Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). For best practices of using MessageGroupId, see Using the MessageGroupId Property (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagegroupid-property.html) in the Amazon Simple Queue Service Developer Guide. MessageGroupId is required for FIFO queues. You can't use it for Standard queues.
  4. messageBody = required, the message to send to the queue
  5. messageAttributes = optional, map of message attribute key value pairs. Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS Message Attributes: (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html) in the Amazon Simple Queue Service Developer Guide. Example: use message attributes to define meta data about the message being sent: a) { "Title": { DataType: "String", StringValue: "The Whistler"}, "Author": { DataType: "String", StringValue: "John Grisham"}, "WeeksOn": { DataType: "Number", StringValue: "6"} }
  6. timeOutDuration = optional, timeout value for context if any

Return Values:

  1. result = struct containing Send... action message result
  2. err = error info if any

func (*SQS) SetQueueAttributes 

func (s *SQS) SetQueueAttributes(queueUrl string,
	attributes map[sqssetqueueattribute.SQSSetQueueAttribute]string,
	timeOutDuration ...time.Duration) (err error)

SetQueueAttributes will set attributes for a given queueUrl

Parameters:

  1. queueUrl = required, the queue to set attributes for, case-sensitive
  2. attributes = required, map of attribute key value pairs to set for a queue based on the queueUrl
  3. timeOutDuration = optional, timeout duration for context if applicable

Return Values:

  1. if successful, nil is returned
  2. otherwise, error info is returned

Set Queue Attributes: (Key = Expected Value)

  1. DelaySeconds = The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.

  2. MaximumMessageSize = The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).

  3. MessageRetentionPeriod = The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days).

  4. Policy = The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies (https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html) in the Amazon IAM User Guide.

  5. ReceiveMessageWaitTimeSeconds = The length of time, in seconds, for which a ReceiveMessage action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.

  6. RedrivePolicy = The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html ) in the Amazon Simple Queue Service Developer Guide.

  7. deadLetterTargetArn = The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.

  8. maxReceiveCount = The number of times a message is delivered to the source queue before being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue. The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.

  9. VisibilityTimeout = The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see Visibility Timeout (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html) in the Amazon Simple Queue Service Developer Guide.

    The following attributes apply only to server-side-encryption (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html):

  10. KmsMasterKeyId = The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms). While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs, the alias of a custom CMK can, for example, be alias/MyAlias. For more examples, see KeyId (https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters) in the AWS Key Management Service API Reference.

  11. KmsDataKeyReusePeriodSeconds = The length of time, in seconds, for which Amazon SQS can reuse a data key, to encrypt or decrypt messages before calling AWS KMS again. See more info at (https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys) Valid Value is an integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work? (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work).

    The following attribute applies only to FIFO (first-in-first-out) queues (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html):

  12. ContentBasedDeduplication = Enables content-based deduplication. For more information, see Exactly-Once Processing (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing) in the Amazon Simple Queue Service Developer Guide. Every message must have a unique MessageDeduplicationId, You may provide a MessageDeduplicationId explicitly. If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message). If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error. If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one. When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered. If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

func (*SQS) UpdateParentSegment added in v1.1.4 

func (s *SQS) UpdateParentSegment(parentSegment *xray.XRayParentSegment)

UpdateParentSegment updates this struct's xray parent segment, if no parent segment, set nil

type SQSChangeVisibilityRequest 

type SQSChangeVisibilityRequest struct {
	Id                       string
	ReceiptHandle            string
	VisibilityTimeOutSeconds int64
}

SQSChangeVisibilityRequest struct represents the request data for change visibility for a message in sqs queue

type SQSDeleteMessageRequest 

type SQSDeleteMessageRequest struct {
	Id            string
	ReceiptHandle string
}

SQSDeleteMessageRequest struct represents the request data to delete a message from sqs queue

type SQSFailResult 

type SQSFailResult struct {
	Id          string
	Code        string
	Message     string
	SenderFault bool
}

SQSFailResult struct represents a Send... batch operation failure result

Id = up to 80 characters, alpha-numeric / dash, and unique, identifies the message within batch

type SQSFifoMessage 

type SQSFifoMessage struct {
	Id                     string
	MessageDeduplicationId string
	MessageGroupId         string
	MessageBody            string
	MessageAttributes      map[string]*awssqs.MessageAttributeValue
}

SQSFifoMessage struct represents a fifo queue message to be used in Send... operations

Id = up to 80 characters, alpha-numeric / dash, and unique, identifies the message within batch

type SQSMessageResult 

type SQSMessageResult struct {
	MessageId              string
	MD5ofMessageBody       string
	MD5ofMessageAttributes string
	FifoSequenceNumber     string
}

SQSMessageResult struct contains the message result via Send... operations

MessageId = Message ID from SQS after send... operation MD5of... = MD5 of given data from SQS, PRIOR TO DATA URL-ENCODED by SQS, 

use this MD5 from SQS response to verify local value MD5 to check if SQS received data properly

FifoSequenceNumber = For FIFO SQS Queue only

type SQSReceivedMessage 

type SQSReceivedMessage struct {
	MessageId              string
	Body                   string
	MessageAttributes      map[string]*awssqs.MessageAttributeValue
	SystemAttributes       map[sqssystemattribute.SQSSystemAttribute]string
	MD5ofBody              string
	MD5ofMessageAttributes string
	ReceiptHandle          string
}

SQSReceivedMessage struct represents received message content elements

type SQSStandardMessage 

type SQSStandardMessage struct {
	Id                string
	MessageBody       string
	MessageAttributes map[string]*awssqs.MessageAttributeValue
	DelaySeconds      int64
}

SQSStandardMessage struct represents a standard queue message to be used in Send... operations

Id = up to 80 characters, alpha-numeric / dash, and unique, identifies the message within batch

type SQSSuccessResult 

type SQSSuccessResult struct {
	Id                     string
	MessageId              string
	MD5ofMessageBody       string
	MD5ofMessageAttributes string
	SequenceNumber         string
}

SQSSuccessResult struct represents a Send... batch operation success result

Id = up to 80 characters, alpha-numeric / dash, and unique, identifies the message within batch

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.