ses

package
v1.3.8 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 27, 2023 License: Apache-2.0 Imports: 20 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type BulkEmailMessageResult 

type BulkEmailMessageResult struct {
	MessageId string
	Status    string
	ErrorInfo string
	Success   bool
}

BulkEmailMessageResult contains result of a bulk email

type Email 

type Email struct {
	// required
	From string

	// at least one element is required
	To []string

	// optional
	CC []string

	// optional
	BCC []string

	// required
	Subject string

	// either BodyHtml or BodyText is required
	BodyHtml string
	BodyText string

	// additional config info
	ReturnPath string
	ReplyTo    []string

	// defaults to UTF-8 if left blank
	Charset string
}

Email struct encapsulates the email message definition to send via AWS SES

func (*Email) GenerateSendEmailInput 

func (e *Email) GenerateSendEmailInput() (*ses.SendEmailInput, error)

GenerateSendEmailInput will create the SendEmailInput object from the struct fields

func (*Email) GenerateSendRawEmailInput added in v1.0.9 

func (e *Email) GenerateSendRawEmailInput(attachmentFileName string, attachmentContentType string, attachmentData []byte) (*ses.SendRawEmailInput, error)

GenerateSendRawEmailInput will create the SendRawEmailInput object from the struct fields

attachmentContentType = See: https://developer.mozilla.org/en-US/docs/Web/HTTP/Basics_of_HTTP/MIME_types/Common_types

func (*Email) Initial 

func (e *Email) Initial(from string, to string, subject string, bodyText string, bodyHtml ...string) *Email

Initial sets new email message

parameters: 

from = email sender from address
to = email sender to address
subject = email subject text
bodyText = email body content in text (both bodyText and bodyHtml may be set at the same time)
bodyHtml = email body content in html (both bodyText and bodyHtml may be set at the same time)

func (*Email) SetBCC 

func (e *Email) SetBCC(bccAddress ...string) *Email

SetBCC adds 'BCC' addresses to email

func (*Email) SetCC 

func (e *Email) SetCC(ccAddress ...string) *Email

SetCC adds 'CC' addresses to email

func (*Email) SetReplyTo 

func (e *Email) SetReplyTo(replyToAddress ...string) *Email

SetReplyTo adds 'Reply-To' addresses to email

func (*Email) SetTo 

func (e *Email) SetTo(toAddress ...string) *Email

SetTo adds additional 'To' addresses to email

type EmailTarget 

type EmailTarget struct {
	// at least one element is required
	To []string

	// optional
	CC []string

	// optional
	BCC []string

	// required - template data in json
	TemplateDataJson string
}

EmailTarget defines a single email target contact for use with SendTemplateEmail or SendBulkTemplateEmail methods

func (*EmailTarget) Initial 

func (t *EmailTarget) Initial(templateDataJson string, toAddress ...string) *EmailTarget

Initial will set template data in json, and list of toAddresses variadic

func (*EmailTarget) SetBCC 

func (t *EmailTarget) SetBCC(bccAddress ...string) *EmailTarget

SetBCC will set list of bccAddress variadic to EmailTarget

func (*EmailTarget) SetCC 

func (t *EmailTarget) SetCC(ccAddress ...string) *EmailTarget

SetCC will set list of ccAddress variadic to EmailTarget

type SES 

type SES struct {
	// define the AWS region that SES is located at
	AwsRegion awsregion.AWSRegion

	// custom http2 client options
	HttpOptions *awshttp2.HttpClientSettings

	// define configuration set to use if any
	ConfigurationSetName string
	// contains filtered or unexported fields
}

SES struct encapsulates the AWS SES access functionality

func (*SES) Connect 

func (s *SES) Connect(parentSegment ...*xray.XRayParentSegment) (err error)

Connect will establish a connection to the SES service

func (*SES) CreateCustomVerificationEmailTemplate 

func (s *SES) CreateCustomVerificationEmailTemplate(templateName string,
	templateSubject string,
	templateContent string,
	fromEmailAddress string,
	successRedirectionURL string,
	failureRedirectionURL string,
	timeOutDuration ...time.Duration) (err error)

CreateCustomVerificationEmailTemplate will create a template for use with custom verification of email address

parameters:

  1. templateName = the name of the template, must be unique
  2. templateSubject = the subject of the verification email (note that there is no tag name value replacement here)
  3. templateContent = the body of the email, can be html or text (note that there is no tag name value replacement here)
  4. fromEmailAddress = the email address that the verification email is sent from (must be email address)
  5. successRedirectionURL = the url that users are sent to if their email addresses are successfully verified
  6. failureRedirectionURL = the url that users are sent to if their email addresses are not successfully verified
  7. timeOutDuration = optional time out value to use in context

func (*SES) CreateTemplate 

func (s *SES) CreateTemplate(templateName string, subjectPart string, textPart string, htmlPart string, timeOutDuration ...time.Duration) (err error)

CreateTemplate will create an email template for use with SendTemplateEmail and SendBulkTemplateEmail methods

parameters:

  1. templateName = name of the template, must be unique
  2. subjectPart = subject text with tag name value replacements
  3. textPart = body text with tag name value replacements
  4. htmlPart = body html with tag name value replacements
  5. timeOutDuration = optional time out value to use in context

template tokens:

  1. subjectPart, textPart, htmlPart = may contain Tag Names for personalization
  2. Tag Name = using {{tagName}} within the string defined above in #1
  3. example: a) Greetings, {{name}} b) <h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p> c) <html><head></head><body><h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p></body></html>
  4. when sending template mail, the Tag Name values are replaced via key-Value pairs within TemplateData in SendTemplateEmail and SendBulkTemplateEmail methods: a) { "name":"Harry", "dayOfWeek":"Monday" }

func (*SES) DeleteCustomVerificationEmailTemplate 

func (s *SES) DeleteCustomVerificationEmailTemplate(templateName string, timeOutDuration ...time.Duration) (err error)

DeleteCustomVerificationEmailTemplate will delete a custom verification email template

parameters:

  1. templateName = name of the template to delete
  2. timeOutDuration = optional time out value to use in context

func (*SES) DeleteTemplate 

func (s *SES) DeleteTemplate(templateName string, timeOutDuration ...time.Duration) (err error)

DeleteTemplate will delete an existing email template

parameters:

  1. templateName = name of the template to delete
  2. timeOutDuration = optional time out value to use in context

func (*SES) Disconnect 

func (s *SES) Disconnect()

Disconnect will disjoin from aws session by clearing it

func (*SES) GetSendQuota 

func (s *SES) GetSendQuota(timeOutDuration ...time.Duration) (sq *SendQuota, err error)

GetSendQuota will get the ses send quota

func (*SES) SendBulkTemplateEmail 

func (s *SES) SendBulkTemplateEmail(senderEmail string,
	returnPath string,
	replyTo string,
	templateName string,
	defaultTemplateDataJson string,
	emailTargetList []*EmailTarget,
	timeOutDuration ...time.Duration) (resultList []*BulkEmailMessageResult, failedCount int, err error)

SendBulkTemplateEmail will send out bulk email via ses using template

parameters:

  1. senderEmail = sender's email address
  2. returnPath = optional, email return path address
  3. replyTo = optional, email reply to address
  4. templateName = the name of the template to use for sending out template emails
  5. defaultTemplateDataJson = the default template data key value pairs in json, to be used if emailTarget did not define a template data json
  6. emailTargetList = slice of pointer to email target object defining where the email is sent to, along with template data key value pairs in json
  7. timeOutDuration = optional, time out value to use in context

template tokens:

  1. subjectPart, textPart, htmlPart = may contain Tag Names for personalization
  2. Tag Name = using {{tagName}} within the string defined above in #1
  3. example: a) Greetings, {{name}} b) <h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p> c) <html><head></head><body><h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p></body></html>
  4. when sending template mail, the Tag Name values are replaced via key-Value pairs within TemplateData in SendTemplateEmail and SendBulkTemplateEmail methods: a) { "name":"Harry", "dayOfWeek":"Monday" }

notes: 

		a) Template = name of template to apply to the email
		b) DefaultTemplateData = json string holding key-value pair of Tag Name and Tag Value (see below about template tokens)
  							 acting as a catch all default in case destination level replacement template data is not set
		c) Source = email address of sender
		d) ReturnPath = return email address (usually same as source)
		e) ReplyToAddresses = list of email addresses for email reply to
		f) Destinations = one or more Destinations, each defining target, and replacement template data for that specific destination
		g) ConfigurationSetName = if ses has a set defined, and need to be used herein

limits:

  1. bulk is limited to 50 destinations per single call (subject to aws ses limits on account)

func (*SES) SendCustomVerificationEmail 

func (s *SES) SendCustomVerificationEmail(templateName string, toEmailAddress string, timeOutDuration ...time.Duration) (messageId string, err error)

SendCustomVerificationEmail will send out a custom verification email to recipient

parameters:

  1. templateName = name of the template to use for the verification email
  2. toEmailAddress = the email address to send verification to
  3. timeOutDuration = optional time out value to use in context

func (*SES) SendEmail 

func (s *SES) SendEmail(email *Email, timeOutDuration ...time.Duration) (messageId string, err error)

SendEmail will send an email message out via SES

func (*SES) SendRawEmail added in v1.0.9 

func (s *SES) SendRawEmail(email *Email, attachmentFileName string, attachmentContentType string,
	timeOutDuration ...time.Duration) (messageId string, err error)

SendRawEmail will send an raw email message out via SES, supporting attachments

attachmentContentType = See: https://developer.mozilla.org/en-US/docs/Web/HTTP/Basics_of_HTTP/MIME_types/Common_types

func (*SES) SendTemplateEmail 

func (s *SES) SendTemplateEmail(senderEmail string,
	returnPath string,
	replyTo string,
	templateName string,
	emailTarget *EmailTarget,
	timeOutDuration ...time.Duration) (messageId string, err error)

SendTemplateEmail will send out email via ses using template

parameters:

  1. senderEmail = sender's email address
  2. returnPath = optional, email return path address
  3. replyTo = optional, email reply to address
  4. templateName = the name of the template to use for sending out template emails
  5. emailTarget = pointer to email target object defining where the email is sent to, along with template data key value pairs in json
  6. timeOutDuration = optional, time out value to use in context

template tokens:

  1. subjectPart, textPart, htmlPart = may contain Tag Names for personalization
  2. Tag Name = using {{tagName}} within the string defined above in #1
  3. example: a) Greetings, {{name}} b) <h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p> c) <html><head></head><body><h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p></body></html>
  4. when sending template mail, the Tag Name values are replaced via key-Value pairs within TemplateData in SendTemplateEmail and SendBulkTemplateEmail methods: a) { "name":"Harry", "dayOfWeek":"Monday" }

notes: 

a) Template = name of template to apply to the email
b) TemplateData = json string holding key-value pair of Tag Name and Tag Value (see below about template tokens)
c) Source = email address of sender
d) ReturnPath = return email address (usually same as source)
e) ReplyToAddresses = list of email addresses for email reply to
f) Destination = email send to destination
g) ConfigurationSetName = if ses has a set defined, and need to be used herein

func (*SES) UpdateCustomVerificationEmailTemplate 

func (s *SES) UpdateCustomVerificationEmailTemplate(templateName string,
	templateSubject string,
	templateContent string,
	fromEmailAddress string,
	successRedirectionURL string,
	failureRedirectionURL string,
	timeOutDuration ...time.Duration) (err error)

UpdateCustomVerificationEmailTemplate will update a template for use with custom verification of email address

parameters:

  1. templateName = the name of the template, must be unique
  2. templateSubject = the subject of the verification email (note that there is no tag name value replacement here)
  3. templateContent = the body of the email, can be html or text (note that there is no tag name value replacement here)
  4. fromEmailAddress = the email address that the verification email is sent from (must be email address)
  5. successRedirectionURL = the url that users are sent to if their email addresses are successfully verified
  6. failureRedirectionURL = the url that users are sent to if their email addresses are not successfully verified
  7. timeOutDuration = optional time out value to use in context

func (*SES) UpdateParentSegment added in v1.1.4 

func (s *SES) UpdateParentSegment(parentSegment *xray.XRayParentSegment)

UpdateParentSegment updates this struct's xray parent segment, if no parent segment, set nil

func (*SES) UpdateTemplate 

func (s *SES) UpdateTemplate(templateName string, subjectPart string, textPart string, htmlPart string, timeOutDuration ...time.Duration) (err error)

UpdateTemplate will update an existing email template for use with SendTemplateEmail and SendBulkTemplateEmail methods

parameters:

  1. templateName = name of the template, must be unique
  2. subjectPart = subject text with tag name value replacements
  3. textPart = body text with tag name value replacements
  4. htmlPart = body html with tag name value replacements
  5. timeOutDuration = optional time out value to use in context

template tokens:

  1. subjectPart, textPart, htmlPart = may contain Tag Names for personalization
  2. Tag Name = using {{tagName}} within the string defined above in #1
  3. example: a) Greetings, {{name}} b) <h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p> c) <html><head></head><body><h1>hello {{name}}, how are you</h1><p>Today is {{dayOfWeek}}</p></body></html>
  4. when sending template mail, the Tag Name values are replaced via key-Value pairs within TemplateData in SendTemplateEmail and SendBulkTemplateEmail methods: a) { "name":"Harry", "dayOfWeek":"Monday" }

type SendQuota 

type SendQuota struct {
	Max24HourSendLimit    int
	MaxPerSecondSendLimit int
	SentLast24Hours       int
}

SendQuota struct encapsulates the ses send quota definition

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.