ec2

package
v1.4.15 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 6, 2016 License: Apache-2.0 Imports: 11 Imported by: 0

Documentation

Overview

Package ec2 provides a client for Amazon Elastic Compute Cloud.

Index

Examples

Constants

View Source 
const (
	// @enum AccountAttributeName
	AccountAttributeNameSupportedPlatforms = "supported-platforms"
	// @enum AccountAttributeName
	AccountAttributeNameDefaultVpc = "default-vpc"
)
View Source 
const (
	// @enum ActivityStatus
	ActivityStatusError = "error"
	// @enum ActivityStatus
	ActivityStatusPendingFulfillment = "pending_fulfillment"
	// @enum ActivityStatus
	ActivityStatusPendingTermination = "pending_termination"
	// @enum ActivityStatus
	ActivityStatusFulfilled = "fulfilled"
)
View Source 
const (
	// @enum Affinity
	AffinityDefault = "default"
	// @enum Affinity
	AffinityHost = "host"
)
View Source 
const (
	// @enum AllocationState
	AllocationStateAvailable = "available"
	// @enum AllocationState
	AllocationStateUnderAssessment = "under-assessment"
	// @enum AllocationState
	AllocationStatePermanentFailure = "permanent-failure"
	// @enum AllocationState
	AllocationStateReleased = "released"
	// @enum AllocationState
	AllocationStateReleasedPermanentFailure = "released-permanent-failure"
)
View Source 
const (
	// @enum AllocationStrategy
	AllocationStrategyLowestPrice = "lowestPrice"
	// @enum AllocationStrategy
	AllocationStrategyDiversified = "diversified"
)
View Source 
const (
	// @enum ArchitectureValues
	ArchitectureValuesI386 = "i386"
	// @enum ArchitectureValues
	ArchitectureValuesX8664 = "x86_64"
)
View Source 
const (
	// @enum AttachmentStatus
	AttachmentStatusAttaching = "attaching"
	// @enum AttachmentStatus
	AttachmentStatusAttached = "attached"
	// @enum AttachmentStatus
	AttachmentStatusDetaching = "detaching"
	// @enum AttachmentStatus
	AttachmentStatusDetached = "detached"
)
View Source 
const (
	// @enum AutoPlacement
	AutoPlacementOn = "on"
	// @enum AutoPlacement
	AutoPlacementOff = "off"
)
View Source 
const (
	// @enum AvailabilityZoneState
	AvailabilityZoneStateAvailable = "available"
	// @enum AvailabilityZoneState
	AvailabilityZoneStateInformation = "information"
	// @enum AvailabilityZoneState
	AvailabilityZoneStateImpaired = "impaired"
	// @enum AvailabilityZoneState
	AvailabilityZoneStateUnavailable = "unavailable"
)
View Source 
const (
	// @enum BatchState
	BatchStateSubmitted = "submitted"
	// @enum BatchState
	BatchStateActive = "active"
	// @enum BatchState
	BatchStateCancelled = "cancelled"
	// @enum BatchState
	BatchStateFailed = "failed"
	// @enum BatchState
	BatchStateCancelledRunning = "cancelled_running"
	// @enum BatchState
	BatchStateCancelledTerminating = "cancelled_terminating"
	// @enum BatchState
	BatchStateModifying = "modifying"
)
View Source 
const (
	// @enum BundleTaskState
	BundleTaskStatePending = "pending"
	// @enum BundleTaskState
	BundleTaskStateWaitingForShutdown = "waiting-for-shutdown"
	// @enum BundleTaskState
	BundleTaskStateBundling = "bundling"
	// @enum BundleTaskState
	BundleTaskStateStoring = "storing"
	// @enum BundleTaskState
	BundleTaskStateCancelling = "cancelling"
	// @enum BundleTaskState
	BundleTaskStateComplete = "complete"
	// @enum BundleTaskState
	BundleTaskStateFailed = "failed"
)
View Source 
const (
	// @enum CancelBatchErrorCode
	CancelBatchErrorCodeFleetRequestIdDoesNotExist = "fleetRequestIdDoesNotExist"
	// @enum CancelBatchErrorCode
	CancelBatchErrorCodeFleetRequestIdMalformed = "fleetRequestIdMalformed"
	// @enum CancelBatchErrorCode
	CancelBatchErrorCodeFleetRequestNotInCancellableState = "fleetRequestNotInCancellableState"
	// @enum CancelBatchErrorCode
	CancelBatchErrorCodeUnexpectedError = "unexpectedError"
)
View Source 
const (
	// @enum CancelSpotInstanceRequestState
	CancelSpotInstanceRequestStateActive = "active"
	// @enum CancelSpotInstanceRequestState
	CancelSpotInstanceRequestStateOpen = "open"
	// @enum CancelSpotInstanceRequestState
	CancelSpotInstanceRequestStateClosed = "closed"
	// @enum CancelSpotInstanceRequestState
	CancelSpotInstanceRequestStateCancelled = "cancelled"
	// @enum CancelSpotInstanceRequestState
	CancelSpotInstanceRequestStateCompleted = "completed"
)
View Source 
const (
	// @enum ConversionTaskState
	ConversionTaskStateActive = "active"
	// @enum ConversionTaskState
	ConversionTaskStateCancelling = "cancelling"
	// @enum ConversionTaskState
	ConversionTaskStateCancelled = "cancelled"
	// @enum ConversionTaskState
	ConversionTaskStateCompleted = "completed"
)
View Source 
const (
	// @enum DatafeedSubscriptionState
	DatafeedSubscriptionStateActive = "Active"
	// @enum DatafeedSubscriptionState
	DatafeedSubscriptionStateInactive = "Inactive"
)
View Source 
const (
	// @enum DeviceType
	DeviceTypeEbs = "ebs"
	// @enum DeviceType
	DeviceTypeInstanceStore = "instance-store"
)
View Source 
const (
	// @enum DiskImageFormat
	DiskImageFormatVmdk = "VMDK"
	// @enum DiskImageFormat
	DiskImageFormatRaw = "RAW"
	// @enum DiskImageFormat
	DiskImageFormatVhd = "VHD"
)
View Source 
const (
	// @enum DomainType
	DomainTypeVpc = "vpc"
	// @enum DomainType
	DomainTypeStandard = "standard"
)
View Source 
const (
	// @enum EventCode
	EventCodeInstanceReboot = "instance-reboot"
	// @enum EventCode
	EventCodeSystemReboot = "system-reboot"
	// @enum EventCode
	EventCodeSystemMaintenance = "system-maintenance"
	// @enum EventCode
	EventCodeInstanceRetirement = "instance-retirement"
	// @enum EventCode
	EventCodeInstanceStop = "instance-stop"
)
View Source 
const (
	// @enum EventType
	EventTypeInstanceChange = "instanceChange"
	// @enum EventType
	EventTypeFleetRequestChange = "fleetRequestChange"
	// @enum EventType
	EventTypeError = "error"
)
View Source 
const (
	// @enum ExcessCapacityTerminationPolicy
	ExcessCapacityTerminationPolicyNoTermination = "noTermination"
	// @enum ExcessCapacityTerminationPolicy
	ExcessCapacityTerminationPolicyDefault = "default"
)
View Source 
const (
	// @enum ExportEnvironment
	ExportEnvironmentCitrix = "citrix"
	// @enum ExportEnvironment
	ExportEnvironmentVmware = "vmware"
	// @enum ExportEnvironment
	ExportEnvironmentMicrosoft = "microsoft"
)
View Source 
const (
	// @enum ExportTaskState
	ExportTaskStateActive = "active"
	// @enum ExportTaskState
	ExportTaskStateCancelling = "cancelling"
	// @enum ExportTaskState
	ExportTaskStateCancelled = "cancelled"
	// @enum ExportTaskState
	ExportTaskStateCompleted = "completed"
)
View Source 
const (
	// @enum FleetType
	FleetTypeRequest = "request"
	// @enum FleetType
	FleetTypeMaintain = "maintain"
)
View Source 
const (
	// @enum FlowLogsResourceType
	FlowLogsResourceTypeVpc = "VPC"
	// @enum FlowLogsResourceType
	FlowLogsResourceTypeSubnet = "Subnet"
	// @enum FlowLogsResourceType
	FlowLogsResourceTypeNetworkInterface = "NetworkInterface"
)
View Source 
const (
	// @enum HostTenancy
	HostTenancyDedicated = "dedicated"
	// @enum HostTenancy
	HostTenancyHost = "host"
)
View Source 
const (
	// @enum HypervisorType
	HypervisorTypeOvm = "ovm"
	// @enum HypervisorType
	HypervisorTypeXen = "xen"
)
View Source 
const (
	// @enum ImageAttributeName
	ImageAttributeNameDescription = "description"
	// @enum ImageAttributeName
	ImageAttributeNameKernel = "kernel"
	// @enum ImageAttributeName
	ImageAttributeNameRamdisk = "ramdisk"
	// @enum ImageAttributeName
	ImageAttributeNameLaunchPermission = "launchPermission"
	// @enum ImageAttributeName
	ImageAttributeNameProductCodes = "productCodes"
	// @enum ImageAttributeName
	ImageAttributeNameBlockDeviceMapping = "blockDeviceMapping"
	// @enum ImageAttributeName
	ImageAttributeNameSriovNetSupport = "sriovNetSupport"
)
View Source 
const (
	// @enum ImageState
	ImageStatePending = "pending"
	// @enum ImageState
	ImageStateAvailable = "available"
	// @enum ImageState
	ImageStateInvalid = "invalid"
	// @enum ImageState
	ImageStateDeregistered = "deregistered"
	// @enum ImageState
	ImageStateTransient = "transient"
	// @enum ImageState
	ImageStateFailed = "failed"
	// @enum ImageState
	ImageStateError = "error"
)
View Source 
const (
	// @enum ImageTypeValues
	ImageTypeValuesMachine = "machine"
	// @enum ImageTypeValues
	ImageTypeValuesKernel = "kernel"
	// @enum ImageTypeValues
	ImageTypeValuesRamdisk = "ramdisk"
)
View Source 
const (
	// @enum InstanceAttributeName
	InstanceAttributeNameInstanceType = "instanceType"
	// @enum InstanceAttributeName
	InstanceAttributeNameKernel = "kernel"
	// @enum InstanceAttributeName
	InstanceAttributeNameRamdisk = "ramdisk"
	// @enum InstanceAttributeName
	InstanceAttributeNameUserData = "userData"
	// @enum InstanceAttributeName
	InstanceAttributeNameDisableApiTermination = "disableApiTermination"
	// @enum InstanceAttributeName
	InstanceAttributeNameInstanceInitiatedShutdownBehavior = "instanceInitiatedShutdownBehavior"
	// @enum InstanceAttributeName
	InstanceAttributeNameRootDeviceName = "rootDeviceName"
	// @enum InstanceAttributeName
	InstanceAttributeNameBlockDeviceMapping = "blockDeviceMapping"
	// @enum InstanceAttributeName
	InstanceAttributeNameProductCodes = "productCodes"
	// @enum InstanceAttributeName
	InstanceAttributeNameSourceDestCheck = "sourceDestCheck"
	// @enum InstanceAttributeName
	InstanceAttributeNameGroupSet = "groupSet"
	// @enum InstanceAttributeName
	InstanceAttributeNameEbsOptimized = "ebsOptimized"
	// @enum InstanceAttributeName
	InstanceAttributeNameSriovNetSupport = "sriovNetSupport"
	// @enum InstanceAttributeName
	InstanceAttributeNameEnaSupport = "enaSupport"
)
View Source 
const (
	// @enum InstanceLifecycleType
	InstanceLifecycleTypeSpot = "spot"
	// @enum InstanceLifecycleType
	InstanceLifecycleTypeScheduled = "scheduled"
)
View Source 
const (
	// @enum InstanceStateName
	InstanceStateNamePending = "pending"
	// @enum InstanceStateName
	InstanceStateNameRunning = "running"
	// @enum InstanceStateName
	InstanceStateNameShuttingDown = "shutting-down"
	// @enum InstanceStateName
	InstanceStateNameTerminated = "terminated"
	// @enum InstanceStateName
	InstanceStateNameStopping = "stopping"
	// @enum InstanceStateName
	InstanceStateNameStopped = "stopped"
)
View Source 
const (
	// @enum InstanceType
	InstanceTypeT1Micro = "t1.micro"
	// @enum InstanceType
	InstanceTypeT2Nano = "t2.nano"
	// @enum InstanceType
	InstanceTypeT2Micro = "t2.micro"
	// @enum InstanceType
	InstanceTypeT2Small = "t2.small"
	// @enum InstanceType
	InstanceTypeT2Medium = "t2.medium"
	// @enum InstanceType
	InstanceTypeT2Large = "t2.large"
	// @enum InstanceType
	InstanceTypeM1Small = "m1.small"
	// @enum InstanceType
	InstanceTypeM1Medium = "m1.medium"
	// @enum InstanceType
	InstanceTypeM1Large = "m1.large"
	// @enum InstanceType
	InstanceTypeM1Xlarge = "m1.xlarge"
	// @enum InstanceType
	InstanceTypeM3Medium = "m3.medium"
	// @enum InstanceType
	InstanceTypeM3Large = "m3.large"
	// @enum InstanceType
	InstanceTypeM3Xlarge = "m3.xlarge"
	// @enum InstanceType
	InstanceTypeM32xlarge = "m3.2xlarge"
	// @enum InstanceType
	InstanceTypeM4Large = "m4.large"
	// @enum InstanceType
	InstanceTypeM4Xlarge = "m4.xlarge"
	// @enum InstanceType
	InstanceTypeM42xlarge = "m4.2xlarge"
	// @enum InstanceType
	InstanceTypeM44xlarge = "m4.4xlarge"
	// @enum InstanceType
	InstanceTypeM410xlarge = "m4.10xlarge"
	// @enum InstanceType
	InstanceTypeM416xlarge = "m4.16xlarge"
	// @enum InstanceType
	InstanceTypeM2Xlarge = "m2.xlarge"
	// @enum InstanceType
	InstanceTypeM22xlarge = "m2.2xlarge"
	// @enum InstanceType
	InstanceTypeM24xlarge = "m2.4xlarge"
	// @enum InstanceType
	InstanceTypeCr18xlarge = "cr1.8xlarge"
	// @enum InstanceType
	InstanceTypeR3Large = "r3.large"
	// @enum InstanceType
	InstanceTypeR3Xlarge = "r3.xlarge"
	// @enum InstanceType
	InstanceTypeR32xlarge = "r3.2xlarge"
	// @enum InstanceType
	InstanceTypeR34xlarge = "r3.4xlarge"
	// @enum InstanceType
	InstanceTypeR38xlarge = "r3.8xlarge"
	// @enum InstanceType
	InstanceTypeX116xlarge = "x1.16xlarge"
	// @enum InstanceType
	InstanceTypeX132xlarge = "x1.32xlarge"
	// @enum InstanceType
	InstanceTypeI2Xlarge = "i2.xlarge"
	// @enum InstanceType
	InstanceTypeI22xlarge = "i2.2xlarge"
	// @enum InstanceType
	InstanceTypeI24xlarge = "i2.4xlarge"
	// @enum InstanceType
	InstanceTypeI28xlarge = "i2.8xlarge"
	// @enum InstanceType
	InstanceTypeHi14xlarge = "hi1.4xlarge"
	// @enum InstanceType
	InstanceTypeHs18xlarge = "hs1.8xlarge"
	// @enum InstanceType
	InstanceTypeC1Medium = "c1.medium"
	// @enum InstanceType
	InstanceTypeC1Xlarge = "c1.xlarge"
	// @enum InstanceType
	InstanceTypeC3Large = "c3.large"
	// @enum InstanceType
	InstanceTypeC3Xlarge = "c3.xlarge"
	// @enum InstanceType
	InstanceTypeC32xlarge = "c3.2xlarge"
	// @enum InstanceType
	InstanceTypeC34xlarge = "c3.4xlarge"
	// @enum InstanceType
	InstanceTypeC38xlarge = "c3.8xlarge"
	// @enum InstanceType
	InstanceTypeC4Large = "c4.large"
	// @enum InstanceType
	InstanceTypeC4Xlarge = "c4.xlarge"
	// @enum InstanceType
	InstanceTypeC42xlarge = "c4.2xlarge"
	// @enum InstanceType
	InstanceTypeC44xlarge = "c4.4xlarge"
	// @enum InstanceType
	InstanceTypeC48xlarge = "c4.8xlarge"
	// @enum InstanceType
	InstanceTypeCc14xlarge = "cc1.4xlarge"
	// @enum InstanceType
	InstanceTypeCc28xlarge = "cc2.8xlarge"
	// @enum InstanceType
	InstanceTypeG22xlarge = "g2.2xlarge"
	// @enum InstanceType
	InstanceTypeG28xlarge = "g2.8xlarge"
	// @enum InstanceType
	InstanceTypeCg14xlarge = "cg1.4xlarge"
	// @enum InstanceType
	InstanceTypeP2Xlarge = "p2.xlarge"
	// @enum InstanceType
	InstanceTypeP28xlarge = "p2.8xlarge"
	// @enum InstanceType
	InstanceTypeP216xlarge = "p2.16xlarge"
	// @enum InstanceType
	InstanceTypeD2Xlarge = "d2.xlarge"
	// @enum InstanceType
	InstanceTypeD22xlarge = "d2.2xlarge"
	// @enum InstanceType
	InstanceTypeD24xlarge = "d2.4xlarge"
	// @enum InstanceType
	InstanceTypeD28xlarge = "d2.8xlarge"
)
View Source 
const (
	// @enum ListingState
	ListingStateAvailable = "available"
	// @enum ListingState
	ListingStateSold = "sold"
	// @enum ListingState
	ListingStateCancelled = "cancelled"
	// @enum ListingState
	ListingStatePending = "pending"
)
View Source 
const (
	// @enum ListingStatus
	ListingStatusActive = "active"
	// @enum ListingStatus
	ListingStatusPending = "pending"
	// @enum ListingStatus
	ListingStatusCancelled = "cancelled"
	// @enum ListingStatus
	ListingStatusClosed = "closed"
)
View Source 
const (
	// @enum MonitoringState
	MonitoringStateDisabled = "disabled"
	// @enum MonitoringState
	MonitoringStateDisabling = "disabling"
	// @enum MonitoringState
	MonitoringStateEnabled = "enabled"
	// @enum MonitoringState
	MonitoringStatePending = "pending"
)
View Source 
const (
	// @enum MoveStatus
	MoveStatusMovingToVpc = "movingToVpc"
	// @enum MoveStatus
	MoveStatusRestoringToClassic = "restoringToClassic"
)
View Source 
const (
	// @enum NatGatewayState
	NatGatewayStatePending = "pending"
	// @enum NatGatewayState
	NatGatewayStateFailed = "failed"
	// @enum NatGatewayState
	NatGatewayStateAvailable = "available"
	// @enum NatGatewayState
	NatGatewayStateDeleting = "deleting"
	// @enum NatGatewayState
	NatGatewayStateDeleted = "deleted"
)
View Source 
const (
	// @enum NetworkInterfaceAttribute
	NetworkInterfaceAttributeDescription = "description"
	// @enum NetworkInterfaceAttribute
	NetworkInterfaceAttributeGroupSet = "groupSet"
	// @enum NetworkInterfaceAttribute
	NetworkInterfaceAttributeSourceDestCheck = "sourceDestCheck"
	// @enum NetworkInterfaceAttribute
	NetworkInterfaceAttributeAttachment = "attachment"
)
View Source 
const (
	// @enum NetworkInterfaceStatus
	NetworkInterfaceStatusAvailable = "available"
	// @enum NetworkInterfaceStatus
	NetworkInterfaceStatusAttaching = "attaching"
	// @enum NetworkInterfaceStatus
	NetworkInterfaceStatusInUse = "in-use"
	// @enum NetworkInterfaceStatus
	NetworkInterfaceStatusDetaching = "detaching"
)
View Source 
const (
	// @enum NetworkInterfaceType
	NetworkInterfaceTypeInterface = "interface"
	// @enum NetworkInterfaceType
	NetworkInterfaceTypeNatGateway = "natGateway"
)
View Source 
const (
	// @enum OfferingClassType
	OfferingClassTypeStandard = "standard"
	// @enum OfferingClassType
	OfferingClassTypeConvertible = "convertible"
)
View Source 
const (
	// @enum OfferingTypeValues
	OfferingTypeValuesHeavyUtilization = "Heavy Utilization"
	// @enum OfferingTypeValues
	OfferingTypeValuesMediumUtilization = "Medium Utilization"
	// @enum OfferingTypeValues
	OfferingTypeValuesLightUtilization = "Light Utilization"
	// @enum OfferingTypeValues
	OfferingTypeValuesNoUpfront = "No Upfront"
	// @enum OfferingTypeValues
	OfferingTypeValuesPartialUpfront = "Partial Upfront"
	// @enum OfferingTypeValues
	OfferingTypeValuesAllUpfront = "All Upfront"
)
View Source 
const (
	// @enum OperationType
	OperationTypeAdd = "add"
	// @enum OperationType
	OperationTypeRemove = "remove"
)
View Source 
const (
	// @enum PaymentOption
	PaymentOptionAllUpfront = "AllUpfront"
	// @enum PaymentOption
	PaymentOptionPartialUpfront = "PartialUpfront"
	// @enum PaymentOption
	PaymentOptionNoUpfront = "NoUpfront"
)
View Source 
const (
	// @enum PlacementGroupState
	PlacementGroupStatePending = "pending"
	// @enum PlacementGroupState
	PlacementGroupStateAvailable = "available"
	// @enum PlacementGroupState
	PlacementGroupStateDeleting = "deleting"
	// @enum PlacementGroupState
	PlacementGroupStateDeleted = "deleted"
)
View Source 
const (
	// @enum ProductCodeValues
	ProductCodeValuesDevpay = "devpay"
	// @enum ProductCodeValues
	ProductCodeValuesMarketplace = "marketplace"
)
View Source 
const (
	// @enum RIProductDescription
	RIProductDescriptionLinuxUnix = "Linux/UNIX"
	// @enum RIProductDescription
	RIProductDescriptionLinuxUnixamazonVpc = "Linux/UNIX (Amazon VPC)"
	// @enum RIProductDescription
	RIProductDescriptionWindows = "Windows"
	// @enum RIProductDescription
	RIProductDescriptionWindowsAmazonVpc = "Windows (Amazon VPC)"
)
View Source 
const (
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesInstanceStuckInState = "instance-stuck-in-state"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesUnresponsive = "unresponsive"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesNotAcceptingCredentials = "not-accepting-credentials"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesPasswordNotAvailable = "password-not-available"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesPerformanceNetwork = "performance-network"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesPerformanceInstanceStore = "performance-instance-store"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesPerformanceEbsVolume = "performance-ebs-volume"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesPerformanceOther = "performance-other"
	// @enum ReportInstanceReasonCodes
	ReportInstanceReasonCodesOther = "other"
)
View Source 
const (
	// @enum ReportStatusType
	ReportStatusTypeOk = "ok"
	// @enum ReportStatusType
	ReportStatusTypeImpaired = "impaired"
)
View Source 
const (
	// @enum ReservationState
	ReservationStatePaymentPending = "payment-pending"
	// @enum ReservationState
	ReservationStatePaymentFailed = "payment-failed"
	// @enum ReservationState
	ReservationStateActive = "active"
	// @enum ReservationState
	ReservationStateRetired = "retired"
)
View Source 
const (
	// @enum ReservedInstanceState
	ReservedInstanceStatePaymentPending = "payment-pending"
	// @enum ReservedInstanceState
	ReservedInstanceStateActive = "active"
	// @enum ReservedInstanceState
	ReservedInstanceStatePaymentFailed = "payment-failed"
	// @enum ReservedInstanceState
	ReservedInstanceStateRetired = "retired"
)
View Source 
const (
	// @enum ResourceType
	ResourceTypeCustomerGateway = "customer-gateway"
	// @enum ResourceType
	ResourceTypeDhcpOptions = "dhcp-options"
	// @enum ResourceType
	ResourceTypeImage = "image"
	// @enum ResourceType
	ResourceTypeInstance = "instance"
	// @enum ResourceType
	ResourceTypeInternetGateway = "internet-gateway"
	// @enum ResourceType
	ResourceTypeNetworkAcl = "network-acl"
	// @enum ResourceType
	ResourceTypeNetworkInterface = "network-interface"
	// @enum ResourceType
	ResourceTypeReservedInstances = "reserved-instances"
	// @enum ResourceType
	ResourceTypeRouteTable = "route-table"
	// @enum ResourceType
	ResourceTypeSnapshot = "snapshot"
	// @enum ResourceType
	ResourceTypeSpotInstancesRequest = "spot-instances-request"
	// @enum ResourceType
	ResourceTypeSubnet = "subnet"
	// @enum ResourceType
	ResourceTypeSecurityGroup = "security-group"
	// @enum ResourceType
	ResourceTypeVolume = "volume"
	// @enum ResourceType
	ResourceTypeVpc = "vpc"
	// @enum ResourceType
	ResourceTypeVpnConnection = "vpn-connection"
	// @enum ResourceType
	ResourceTypeVpnGateway = "vpn-gateway"
)
View Source 
const (
	// @enum RouteOrigin
	RouteOriginCreateRouteTable = "CreateRouteTable"
	// @enum RouteOrigin
	RouteOriginCreateRoute = "CreateRoute"
	// @enum RouteOrigin
	RouteOriginEnableVgwRoutePropagation = "EnableVgwRoutePropagation"
)
View Source 
const (
	// @enum RouteState
	RouteStateActive = "active"
	// @enum RouteState
	RouteStateBlackhole = "blackhole"
)
View Source 
const (
	// @enum RuleAction
	RuleActionAllow = "allow"
	// @enum RuleAction
	RuleActionDeny = "deny"
)
View Source 
const (
	// @enum ShutdownBehavior
	ShutdownBehaviorStop = "stop"
	// @enum ShutdownBehavior
	ShutdownBehaviorTerminate = "terminate"
)
View Source 
const (
	// @enum SnapshotAttributeName
	SnapshotAttributeNameProductCodes = "productCodes"
	// @enum SnapshotAttributeName
	SnapshotAttributeNameCreateVolumePermission = "createVolumePermission"
)
View Source 
const (
	// @enum SnapshotState
	SnapshotStatePending = "pending"
	// @enum SnapshotState
	SnapshotStateCompleted = "completed"
	// @enum SnapshotState
	SnapshotStateError = "error"
)
View Source 
const (
	// @enum SpotInstanceState
	SpotInstanceStateOpen = "open"
	// @enum SpotInstanceState
	SpotInstanceStateActive = "active"
	// @enum SpotInstanceState
	SpotInstanceStateClosed = "closed"
	// @enum SpotInstanceState
	SpotInstanceStateCancelled = "cancelled"
	// @enum SpotInstanceState
	SpotInstanceStateFailed = "failed"
)
View Source 
const (
	// @enum SpotInstanceType
	SpotInstanceTypeOneTime = "one-time"
	// @enum SpotInstanceType
	SpotInstanceTypePersistent = "persistent"
)
View Source 
const (
	// @enum State
	StatePending = "Pending"
	// @enum State
	StateAvailable = "Available"
	// @enum State
	StateDeleting = "Deleting"
	// @enum State
	StateDeleted = "Deleted"
)
View Source 
const (
	// @enum Status
	StatusMoveInProgress = "MoveInProgress"
	// @enum Status
	StatusInVpc = "InVpc"
	// @enum Status
	StatusInClassic = "InClassic"
)
View Source 
const (
	// @enum StatusType
	StatusTypePassed = "passed"
	// @enum StatusType
	StatusTypeFailed = "failed"
	// @enum StatusType
	StatusTypeInsufficientData = "insufficient-data"
	// @enum StatusType
	StatusTypeInitializing = "initializing"
)
View Source 
const (
	// @enum SubnetState
	SubnetStatePending = "pending"
	// @enum SubnetState
	SubnetStateAvailable = "available"
)
View Source 
const (
	// @enum SummaryStatus
	SummaryStatusOk = "ok"
	// @enum SummaryStatus
	SummaryStatusImpaired = "impaired"
	// @enum SummaryStatus
	SummaryStatusInsufficientData = "insufficient-data"
	// @enum SummaryStatus
	SummaryStatusNotApplicable = "not-applicable"
	// @enum SummaryStatus
	SummaryStatusInitializing = "initializing"
)
View Source 
const (
	// @enum TelemetryStatus
	TelemetryStatusUp = "UP"
	// @enum TelemetryStatus
	TelemetryStatusDown = "DOWN"
)
View Source 
const (
	// @enum Tenancy
	TenancyDefault = "default"
	// @enum Tenancy
	TenancyDedicated = "dedicated"
	// @enum Tenancy
	TenancyHost = "host"
)
View Source 
const (
	// @enum TrafficType
	TrafficTypeAccept = "ACCEPT"
	// @enum TrafficType
	TrafficTypeReject = "REJECT"
	// @enum TrafficType
	TrafficTypeAll = "ALL"
)
View Source 
const (
	// @enum VirtualizationType
	VirtualizationTypeHvm = "hvm"
	// @enum VirtualizationType
	VirtualizationTypeParavirtual = "paravirtual"
)
View Source 
const (
	// @enum VolumeAttachmentState
	VolumeAttachmentStateAttaching = "attaching"
	// @enum VolumeAttachmentState
	VolumeAttachmentStateAttached = "attached"
	// @enum VolumeAttachmentState
	VolumeAttachmentStateDetaching = "detaching"
	// @enum VolumeAttachmentState
	VolumeAttachmentStateDetached = "detached"
)
View Source 
const (
	// @enum VolumeAttributeName
	VolumeAttributeNameAutoEnableIo = "autoEnableIO"
	// @enum VolumeAttributeName
	VolumeAttributeNameProductCodes = "productCodes"
)
View Source 
const (
	// @enum VolumeState
	VolumeStateCreating = "creating"
	// @enum VolumeState
	VolumeStateAvailable = "available"
	// @enum VolumeState
	VolumeStateInUse = "in-use"
	// @enum VolumeState
	VolumeStateDeleting = "deleting"
	// @enum VolumeState
	VolumeStateDeleted = "deleted"
	// @enum VolumeState
	VolumeStateError = "error"
)
View Source 
const (
	// @enum VolumeStatusInfoStatus
	VolumeStatusInfoStatusOk = "ok"
	// @enum VolumeStatusInfoStatus
	VolumeStatusInfoStatusImpaired = "impaired"
	// @enum VolumeStatusInfoStatus
	VolumeStatusInfoStatusInsufficientData = "insufficient-data"
)
View Source 
const (
	// @enum VolumeStatusName
	VolumeStatusNameIoEnabled = "io-enabled"
	// @enum VolumeStatusName
	VolumeStatusNameIoPerformance = "io-performance"
)
View Source 
const (
	// @enum VolumeType
	VolumeTypeStandard = "standard"
	// @enum VolumeType
	VolumeTypeIo1 = "io1"
	// @enum VolumeType
	VolumeTypeGp2 = "gp2"
	// @enum VolumeType
	VolumeTypeSc1 = "sc1"
	// @enum VolumeType
	VolumeTypeSt1 = "st1"
)
View Source 
const (
	// @enum VpcAttributeName
	VpcAttributeNameEnableDnsSupport = "enableDnsSupport"
	// @enum VpcAttributeName
	VpcAttributeNameEnableDnsHostnames = "enableDnsHostnames"
)
View Source 
const (
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeInitiatingRequest = "initiating-request"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodePendingAcceptance = "pending-acceptance"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeActive = "active"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeDeleted = "deleted"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeRejected = "rejected"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeFailed = "failed"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeExpired = "expired"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeProvisioning = "provisioning"
	// @enum VpcPeeringConnectionStateReasonCode
	VpcPeeringConnectionStateReasonCodeDeleting = "deleting"
)
View Source 
const (
	// @enum VpcState
	VpcStatePending = "pending"
	// @enum VpcState
	VpcStateAvailable = "available"
)
View Source 
const (
	// @enum VpnState
	VpnStatePending = "pending"
	// @enum VpnState
	VpnStateAvailable = "available"
	// @enum VpnState
	VpnStateDeleting = "deleting"
	// @enum VpnState
	VpnStateDeleted = "deleted"
)
View Source 
const (
	// @enum scope
	ScopeAvailabilityZone = "Availability Zone"
	// @enum scope
	ScopeRegion = "Region"
)
View Source 
const (
	// @enum ContainerFormat
	ContainerFormatOva = "ova"
)
View Source 
const (
	// @enum CurrencyCodeValues
	CurrencyCodeValuesUsd = "USD"
)
View Source 
const (
	// @enum GatewayType
	GatewayTypeIpsec1 = "ipsec.1"
)
View Source 
const (
	// @enum PermissionGroup
	PermissionGroupAll = "all"
)
View Source 
const (
	// @enum PlacementStrategy
	PlacementStrategyCluster = "cluster"
)
View Source 
const (
	// @enum PlatformValues
	PlatformValuesWindows = "Windows"
)
View Source 
const (
	// @enum RecurringChargeFrequency
	RecurringChargeFrequencyHourly = "Hourly"
)
View Source 
const (
	// @enum ResetImageAttributeName
	ResetImageAttributeNameLaunchPermission = "launchPermission"
)
View Source 
const ServiceName = "ec2"

A ServiceName is the name of the service the client will make API calls to.

View Source 
const (
	// @enum StatusName
	StatusNameReachability = "reachability"
)
View Source 
const (
	// @enum VpnStaticRouteSource
	VpnStaticRouteSourceStatic = "Static"
)

Variables

This section is empty.

Functions

This section is empty.

Types

type AcceptReservedInstancesExchangeQuoteInput added in v1.4.15 

type AcceptReservedInstancesExchangeQuoteInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The IDs of the Convertible Reserved Instances that you want to exchange for
	// other Convertible Reserved Instances of the same or higher value.
	ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"`

	// The configurations of the Convertible Reserved Instance offerings you are
	// purchasing in this exchange.
	TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for accepting the quote.

func (AcceptReservedInstancesExchangeQuoteInput) GoString added in v1.4.15 

func (s AcceptReservedInstancesExchangeQuoteInput) GoString() string

GoString returns the string representation

func (AcceptReservedInstancesExchangeQuoteInput) String added in v1.4.15 

func (s AcceptReservedInstancesExchangeQuoteInput) String() string

String returns the string representation

func (*AcceptReservedInstancesExchangeQuoteInput) Validate added in v1.4.15 

func (s *AcceptReservedInstancesExchangeQuoteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AcceptReservedInstancesExchangeQuoteOutput added in v1.4.15 

type AcceptReservedInstancesExchangeQuoteOutput struct {

	// The ID of the successful exchange.
	ExchangeId *string `locationName:"exchangeId" type:"string"`
	// contains filtered or unexported fields
}

The result of the exchange and whether it was successful.

func (AcceptReservedInstancesExchangeQuoteOutput) GoString added in v1.4.15 

func (s AcceptReservedInstancesExchangeQuoteOutput) GoString() string

GoString returns the string representation

func (AcceptReservedInstancesExchangeQuoteOutput) String added in v1.4.15 

func (s AcceptReservedInstancesExchangeQuoteOutput) String() string

String returns the string representation

type AcceptVpcPeeringConnectionInput added in v0.9.5 

type AcceptVpcPeeringConnectionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for AcceptVpcPeeringConnection.

func (AcceptVpcPeeringConnectionInput) GoString added in v0.9.5 

func (s AcceptVpcPeeringConnectionInput) GoString() string

GoString returns the string representation

func (AcceptVpcPeeringConnectionInput) String added in v0.9.5 

func (s AcceptVpcPeeringConnectionInput) String() string

String returns the string representation

type AcceptVpcPeeringConnectionOutput added in v0.9.5 

type AcceptVpcPeeringConnectionOutput struct {

	// Information about the VPC peering connection.
	VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of AcceptVpcPeeringConnection.

func (AcceptVpcPeeringConnectionOutput) GoString added in v0.9.5 

func (s AcceptVpcPeeringConnectionOutput) GoString() string

GoString returns the string representation

func (AcceptVpcPeeringConnectionOutput) String added in v0.9.5 

func (s AcceptVpcPeeringConnectionOutput) String() string

String returns the string representation

type AccountAttribute 

type AccountAttribute struct {

	// The name of the account attribute.
	AttributeName *string `locationName:"attributeName" type:"string"`

	// One or more values for the account attribute.
	AttributeValues []*AccountAttributeValue `locationName:"attributeValueSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes an account attribute.

func (AccountAttribute) GoString added in v0.6.5 

func (s AccountAttribute) GoString() string

GoString returns the string representation

func (AccountAttribute) String added in v0.6.5 

func (s AccountAttribute) String() string

String returns the string representation

type AccountAttributeValue 

type AccountAttributeValue struct {

	// The value of the attribute.
	AttributeValue *string `locationName:"attributeValue" type:"string"`
	// contains filtered or unexported fields
}

Describes a value of an account attribute.

func (AccountAttributeValue) GoString added in v0.6.5 

func (s AccountAttributeValue) GoString() string

GoString returns the string representation

func (AccountAttributeValue) String added in v0.6.5 

func (s AccountAttributeValue) String() string

String returns the string representation

type ActiveInstance 

type ActiveInstance struct {

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string"`

	// The ID of the Spot instance request.
	SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"`
	// contains filtered or unexported fields
}

Describes a running instance in a Spot fleet.

func (ActiveInstance) GoString added in v0.6.5 

func (s ActiveInstance) GoString() string

GoString returns the string representation

func (ActiveInstance) String added in v0.6.5 

func (s ActiveInstance) String() string

String returns the string representation

type Address 

type Address struct {

	// The ID representing the allocation of the address for use with EC2-VPC.
	AllocationId *string `locationName:"allocationId" type:"string"`

	// The ID representing the association of the address with an instance in a
	// VPC.
	AssociationId *string `locationName:"associationId" type:"string"`

	// Indicates whether this Elastic IP address is for use with instances in EC2-Classic
	// (standard) or instances in a VPC (vpc).
	Domain *string `locationName:"domain" type:"string" enum:"DomainType"`

	// The ID of the instance that the address is associated with (if any).
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The ID of the AWS account that owns the network interface.
	NetworkInterfaceOwnerId *string `locationName:"networkInterfaceOwnerId" type:"string"`

	// The private IP address associated with the Elastic IP address.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Describes an Elastic IP address.

func (Address) GoString added in v0.6.5 

func (s Address) GoString() string

GoString returns the string representation

func (Address) String added in v0.6.5 

func (s Address) String() string

String returns the string representation

type AllocateAddressInput 

type AllocateAddressInput struct {

	// Set to vpc to allocate the address for use with instances in a VPC.
	//
	// Default: The address is for use with instances in EC2-Classic.
	Domain *string `type:"string" enum:"DomainType"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for AllocateAddress.

func (AllocateAddressInput) GoString added in v0.6.5 

func (s AllocateAddressInput) GoString() string

GoString returns the string representation

func (AllocateAddressInput) String added in v0.6.5 

func (s AllocateAddressInput) String() string

String returns the string representation

type AllocateAddressOutput 

type AllocateAddressOutput struct {

	// [EC2-VPC] The ID that AWS assigns to represent the allocation of the Elastic
	// IP address for use with instances in a VPC.
	AllocationId *string `locationName:"allocationId" type:"string"`

	// Indicates whether this Elastic IP address is for use with instances in EC2-Classic
	// (standard) or instances in a VPC (vpc).
	Domain *string `locationName:"domain" type:"string" enum:"DomainType"`

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of AllocateAddress.

func (AllocateAddressOutput) GoString added in v0.6.5 

func (s AllocateAddressOutput) GoString() string

GoString returns the string representation

func (AllocateAddressOutput) String added in v0.6.5 

func (s AllocateAddressOutput) String() string

String returns the string representation

type AllocateHostsInput added in v1.0.1 

type AllocateHostsInput struct {

	// This is enabled by default. This property allows instances to be automatically
	// placed onto available Dedicated Hosts, when you are launching instances without
	// specifying a host ID.
	//
	// Default: Enabled
	AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"`

	// The Availability Zone for the Dedicated Hosts.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"`

	// Unique, case-sensitive identifier you provide to ensure idempotency of the
	// request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Specify the instance type that you want your Dedicated Hosts to be configured
	// for. When you specify the instance type, that is the only instance type that
	// you can launch onto that host.
	InstanceType *string `locationName:"instanceType" type:"string" required:"true"`

	// The number of Dedicated Hosts you want to allocate to your account with these
	// parameters.
	Quantity *int64 `locationName:"quantity" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AllocateHosts.

func (AllocateHostsInput) GoString added in v1.0.1 

func (s AllocateHostsInput) GoString() string

GoString returns the string representation

func (AllocateHostsInput) String added in v1.0.1 

func (s AllocateHostsInput) String() string

String returns the string representation

func (*AllocateHostsInput) Validate added in v1.1.21 

func (s *AllocateHostsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocateHostsOutput added in v1.0.1 

type AllocateHostsOutput struct {

	// The ID of the allocated Dedicated Host. This is used when you want to launch
	// an instance onto a specific host.
	HostIds []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of AllocateHosts.

func (AllocateHostsOutput) GoString added in v1.0.1 

func (s AllocateHostsOutput) GoString() string

GoString returns the string representation

func (AllocateHostsOutput) String added in v1.0.1 

func (s AllocateHostsOutput) String() string

String returns the string representation

type AssignPrivateIpAddressesInput added in v0.9.5 

type AssignPrivateIpAddressesInput struct {

	// Indicates whether to allow an IP address that is already assigned to another
	// network interface or instance to be reassigned to the specified network interface.
	AllowReassignment *bool `locationName:"allowReassignment" type:"boolean"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`

	// One or more IP addresses to be assigned as a secondary private IP address
	// to the network interface. You can't specify this parameter when also specifying
	// a number of secondary IP addresses.
	//
	// If you don't specify an IP address, Amazon EC2 automatically selects an
	// IP address within the subnet range.
	PrivateIpAddresses []*string `locationName:"privateIpAddress" locationNameList:"PrivateIpAddress" type:"list"`

	// The number of secondary IP addresses to assign to the network interface.
	// You can't specify this parameter when also specifying private IP addresses.
	SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for AssignPrivateIpAddresses.

func (AssignPrivateIpAddressesInput) GoString added in v0.9.5 

func (s AssignPrivateIpAddressesInput) GoString() string

GoString returns the string representation

func (AssignPrivateIpAddressesInput) String added in v0.9.5 

func (s AssignPrivateIpAddressesInput) String() string

String returns the string representation

func (*AssignPrivateIpAddressesInput) Validate added in v1.1.21 

func (s *AssignPrivateIpAddressesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssignPrivateIpAddressesOutput added in v0.9.5 

type AssignPrivateIpAddressesOutput struct {
	// contains filtered or unexported fields
}

func (AssignPrivateIpAddressesOutput) GoString added in v0.9.5 

func (s AssignPrivateIpAddressesOutput) GoString() string

GoString returns the string representation

func (AssignPrivateIpAddressesOutput) String added in v0.9.5 

func (s AssignPrivateIpAddressesOutput) String() string

String returns the string representation

type AssociateAddressInput 

type AssociateAddressInput struct {

	// [EC2-VPC] The allocation ID. This is required for EC2-VPC.
	AllocationId *string `type:"string"`

	// [EC2-VPC] For a VPC in an EC2-Classic account, specify true to allow an Elastic
	// IP address that is already associated with an instance or network interface
	// to be reassociated with the specified instance or network interface. Otherwise,
	// the operation fails. In a VPC in an EC2-VPC-only account, reassociation is
	// automatic, therefore you can specify false to ensure the operation fails
	// if the Elastic IP address is already associated with another resource.
	AllowReassociation *bool `locationName:"allowReassociation" type:"boolean"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance. This is required for EC2-Classic. For EC2-VPC, you
	// can specify either the instance ID or the network interface ID, but not both.
	// The operation fails if you specify an instance ID unless exactly one network
	// interface is attached.
	InstanceId *string `type:"string"`

	// [EC2-VPC] The ID of the network interface. If the instance has more than
	// one network interface, you must specify a network interface ID.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// [EC2-VPC] The primary or secondary private IP address to associate with the
	// Elastic IP address. If no private IP address is specified, the Elastic IP
	// address is associated with the primary private IP address.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The Elastic IP address. This is required for EC2-Classic.
	PublicIp *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for AssociateAddress.

func (AssociateAddressInput) GoString added in v0.6.5 

func (s AssociateAddressInput) GoString() string

GoString returns the string representation

func (AssociateAddressInput) String added in v0.6.5 

func (s AssociateAddressInput) String() string

String returns the string representation

type AssociateAddressOutput 

type AssociateAddressOutput struct {

	// [EC2-VPC] The ID that represents the association of the Elastic IP address
	// with an instance.
	AssociationId *string `locationName:"associationId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of AssociateAddress.

func (AssociateAddressOutput) GoString added in v0.6.5 

func (s AssociateAddressOutput) GoString() string

GoString returns the string representation

func (AssociateAddressOutput) String added in v0.6.5 

func (s AssociateAddressOutput) String() string

String returns the string representation

type AssociateDhcpOptionsInput added in v0.9.5 

type AssociateDhcpOptionsInput struct {

	// The ID of the DHCP options set, or default to associate no DHCP options with
	// the VPC.
	DhcpOptionsId *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AssociateDhcpOptions.

func (AssociateDhcpOptionsInput) GoString added in v0.9.5 

func (s AssociateDhcpOptionsInput) GoString() string

GoString returns the string representation

func (AssociateDhcpOptionsInput) String added in v0.9.5 

func (s AssociateDhcpOptionsInput) String() string

String returns the string representation

func (*AssociateDhcpOptionsInput) Validate added in v1.1.21 

func (s *AssociateDhcpOptionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateDhcpOptionsOutput added in v0.9.5 

type AssociateDhcpOptionsOutput struct {
	// contains filtered or unexported fields
}

func (AssociateDhcpOptionsOutput) GoString added in v0.9.5 

func (s AssociateDhcpOptionsOutput) GoString() string

GoString returns the string representation

func (AssociateDhcpOptionsOutput) String added in v0.9.5 

func (s AssociateDhcpOptionsOutput) String() string

String returns the string representation

type AssociateRouteTableInput 

type AssociateRouteTableInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AssociateRouteTable.

func (AssociateRouteTableInput) GoString added in v0.6.5 

func (s AssociateRouteTableInput) GoString() string

GoString returns the string representation

func (AssociateRouteTableInput) String added in v0.6.5 

func (s AssociateRouteTableInput) String() string

String returns the string representation

func (*AssociateRouteTableInput) Validate added in v1.1.21 

func (s *AssociateRouteTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateRouteTableOutput 

type AssociateRouteTableOutput struct {

	// The route table association ID (needed to disassociate the route table).
	AssociationId *string `locationName:"associationId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of AssociateRouteTable.

func (AssociateRouteTableOutput) GoString added in v0.6.5 

func (s AssociateRouteTableOutput) GoString() string

GoString returns the string representation

func (AssociateRouteTableOutput) String added in v0.6.5 

func (s AssociateRouteTableOutput) String() string

String returns the string representation

type AttachClassicLinkVpcInput added in v0.9.5 

type AttachClassicLinkVpcInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of one or more of the VPC's security groups. You cannot specify security
	// groups from a different VPC.
	Groups []*string `locationName:"SecurityGroupId" locationNameList:"groupId" type:"list" required:"true"`

	// The ID of an EC2-Classic instance to link to the ClassicLink-enabled VPC.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// The ID of a ClassicLink-enabled VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AttachClassicLinkVpc.

func (AttachClassicLinkVpcInput) GoString added in v0.9.5 

func (s AttachClassicLinkVpcInput) GoString() string

GoString returns the string representation

func (AttachClassicLinkVpcInput) String added in v0.9.5 

func (s AttachClassicLinkVpcInput) String() string

String returns the string representation

func (*AttachClassicLinkVpcInput) Validate added in v1.1.21 

func (s *AttachClassicLinkVpcInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachClassicLinkVpcOutput added in v0.9.5 

type AttachClassicLinkVpcOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of AttachClassicLinkVpc.

func (AttachClassicLinkVpcOutput) GoString added in v0.9.5 

func (s AttachClassicLinkVpcOutput) GoString() string

GoString returns the string representation

func (AttachClassicLinkVpcOutput) String added in v0.9.5 

func (s AttachClassicLinkVpcOutput) String() string

String returns the string representation

type AttachInternetGatewayInput 

type AttachInternetGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the Internet gateway.
	InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AttachInternetGateway.

func (AttachInternetGatewayInput) GoString added in v0.6.5 

func (s AttachInternetGatewayInput) GoString() string

GoString returns the string representation

func (AttachInternetGatewayInput) String added in v0.6.5 

func (s AttachInternetGatewayInput) String() string

String returns the string representation

func (*AttachInternetGatewayInput) Validate added in v1.1.21 

func (s *AttachInternetGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachInternetGatewayOutput 

type AttachInternetGatewayOutput struct {
	// contains filtered or unexported fields
}

func (AttachInternetGatewayOutput) GoString added in v0.6.5 

func (s AttachInternetGatewayOutput) GoString() string

GoString returns the string representation

func (AttachInternetGatewayOutput) String added in v0.6.5 

func (s AttachInternetGatewayOutput) String() string

String returns the string representation

type AttachNetworkInterfaceInput 

type AttachNetworkInterfaceInput struct {

	// The index of the device for the network interface attachment.
	DeviceIndex *int64 `locationName:"deviceIndex" type:"integer" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AttachNetworkInterface.

func (AttachNetworkInterfaceInput) GoString added in v0.6.5 

func (s AttachNetworkInterfaceInput) GoString() string

GoString returns the string representation

func (AttachNetworkInterfaceInput) String added in v0.6.5 

func (s AttachNetworkInterfaceInput) String() string

String returns the string representation

func (*AttachNetworkInterfaceInput) Validate added in v1.1.21 

func (s *AttachNetworkInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachNetworkInterfaceOutput 

type AttachNetworkInterfaceOutput struct {

	// The ID of the network interface attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of AttachNetworkInterface.

func (AttachNetworkInterfaceOutput) GoString added in v0.6.5 

func (s AttachNetworkInterfaceOutput) GoString() string

GoString returns the string representation

func (AttachNetworkInterfaceOutput) String added in v0.6.5 

func (s AttachNetworkInterfaceOutput) String() string

String returns the string representation

type AttachVolumeInput 

type AttachVolumeInput struct {

	// The device name to expose to the instance (for example, /dev/sdh or xvdh).
	Device *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `type:"string" required:"true"`

	// The ID of the EBS volume. The volume and instance must be within the same
	// Availability Zone.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AttachVolume.

func (AttachVolumeInput) GoString added in v0.6.5 

func (s AttachVolumeInput) GoString() string

GoString returns the string representation

func (AttachVolumeInput) String added in v0.6.5 

func (s AttachVolumeInput) String() string

String returns the string representation

func (*AttachVolumeInput) Validate added in v1.1.21 

func (s *AttachVolumeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachVpnGatewayInput added in v0.9.5 

type AttachVpnGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`

	// The ID of the virtual private gateway.
	VpnGatewayId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AttachVpnGateway.

func (AttachVpnGatewayInput) GoString added in v0.9.5 

func (s AttachVpnGatewayInput) GoString() string

GoString returns the string representation

func (AttachVpnGatewayInput) String added in v0.9.5 

func (s AttachVpnGatewayInput) String() string

String returns the string representation

func (*AttachVpnGatewayInput) Validate added in v1.1.21 

func (s *AttachVpnGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachVpnGatewayOutput added in v0.9.5 

type AttachVpnGatewayOutput struct {

	// Information about the attachment.
	VpcAttachment *VpcAttachment `locationName:"attachment" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of AttachVpnGateway.

func (AttachVpnGatewayOutput) GoString added in v0.9.5 

func (s AttachVpnGatewayOutput) GoString() string

GoString returns the string representation

func (AttachVpnGatewayOutput) String added in v0.9.5 

func (s AttachVpnGatewayOutput) String() string

String returns the string representation

type AttributeBooleanValue 

type AttributeBooleanValue struct {

	// The attribute value. The valid values are true or false.
	Value *bool `locationName:"value" type:"boolean"`
	// contains filtered or unexported fields
}

Describes a value for a resource attribute that is a Boolean value.

func (AttributeBooleanValue) GoString added in v0.6.5 

func (s AttributeBooleanValue) GoString() string

GoString returns the string representation

func (AttributeBooleanValue) String added in v0.6.5 

func (s AttributeBooleanValue) String() string

String returns the string representation

type AttributeValue 

type AttributeValue struct {

	// The attribute value. Note that the value is case-sensitive.
	Value *string `locationName:"value" type:"string"`
	// contains filtered or unexported fields
}

Describes a value for a resource attribute that is a String.

func (AttributeValue) GoString added in v0.6.5 

func (s AttributeValue) GoString() string

GoString returns the string representation

func (AttributeValue) String added in v0.6.5 

func (s AttributeValue) String() string

String returns the string representation

type AuthorizeSecurityGroupEgressInput 

type AuthorizeSecurityGroupEgressInput struct {

	// The CIDR IP address range. We recommend that you specify the CIDR range in
	// a set of IP permissions instead.
	CidrIp *string `locationName:"cidrIp" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The start of port range for the TCP and UDP protocols, or an ICMP type number.
	// We recommend that you specify the port range in a set of IP permissions instead.
	FromPort *int64 `locationName:"fromPort" type:"integer"`

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string" required:"true"`

	// A set of IP permissions. You can't specify a destination security group and
	// a CIDR IP address range.
	IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"`

	// The IP protocol name or number. We recommend that you specify the protocol
	// in a set of IP permissions instead.
	IpProtocol *string `locationName:"ipProtocol" type:"string"`

	// The name of a destination security group. To authorize outbound access to
	// a destination security group, we recommend that you use a set of IP permissions
	// instead.
	SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"`

	// The AWS account number for a destination security group. To authorize outbound
	// access to a destination security group, we recommend that you use a set of
	// IP permissions instead.
	SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"`

	// The end of port range for the TCP and UDP protocols, or an ICMP type number.
	// We recommend that you specify the port range in a set of IP permissions instead.
	ToPort *int64 `locationName:"toPort" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for AuthorizeSecurityGroupEgress.

func (AuthorizeSecurityGroupEgressInput) GoString added in v0.6.5 

func (s AuthorizeSecurityGroupEgressInput) GoString() string

GoString returns the string representation

func (AuthorizeSecurityGroupEgressInput) String added in v0.6.5 

func (s AuthorizeSecurityGroupEgressInput) String() string

String returns the string representation

func (*AuthorizeSecurityGroupEgressInput) Validate added in v1.1.21 

func (s *AuthorizeSecurityGroupEgressInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AuthorizeSecurityGroupEgressOutput 

type AuthorizeSecurityGroupEgressOutput struct {
	// contains filtered or unexported fields
}

func (AuthorizeSecurityGroupEgressOutput) GoString added in v0.6.5 

func (s AuthorizeSecurityGroupEgressOutput) GoString() string

GoString returns the string representation

func (AuthorizeSecurityGroupEgressOutput) String added in v0.6.5 

func (s AuthorizeSecurityGroupEgressOutput) String() string

String returns the string representation

type AuthorizeSecurityGroupIngressInput 

type AuthorizeSecurityGroupIngressInput struct {

	// The CIDR IP address range. You can't specify this parameter when specifying
	// a source security group.
	CidrIp *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The start of port range for the TCP and UDP protocols, or an ICMP type number.
	// For the ICMP type number, use -1 to specify all ICMP types.
	FromPort *int64 `type:"integer"`

	// The ID of the security group. Required for a nondefault VPC.
	GroupId *string `type:"string"`

	// [EC2-Classic, default VPC] The name of the security group.
	GroupName *string `type:"string"`

	// A set of IP permissions. Can be used to specify multiple rules in a single
	// command.
	IpPermissions []*IpPermission `locationNameList:"item" type:"list"`

	// The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)).
	// (VPC only) Use -1 to specify all traffic. If you specify -1, traffic on all
	// ports is allowed, regardless of any ports you specify.
	IpProtocol *string `type:"string"`

	// [EC2-Classic, default VPC] The name of the source security group. You can't
	// specify this parameter in combination with the following parameters: the
	// CIDR IP address range, the start of the port range, the IP protocol, and
	// the end of the port range. Creates rules that grant full ICMP, UDP, and TCP
	// access. To create a rule with a specific IP protocol and port range, use
	// a set of IP permissions instead. For EC2-VPC, the source security group must
	// be in the same VPC.
	SourceSecurityGroupName *string `type:"string"`

	// [EC2-Classic] The AWS account number for the source security group, if the
	// source security group is in a different account. You can't specify this parameter
	// in combination with the following parameters: the CIDR IP address range,
	// the IP protocol, the start of the port range, and the end of the port range.
	// Creates rules that grant full ICMP, UDP, and TCP access. To create a rule
	// with a specific IP protocol and port range, use a set of IP permissions instead.
	SourceSecurityGroupOwnerId *string `type:"string"`

	// The end of port range for the TCP and UDP protocols, or an ICMP code number.
	// For the ICMP code number, use -1 to specify all ICMP codes for the ICMP type.
	ToPort *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for AuthorizeSecurityGroupIngress.

func (AuthorizeSecurityGroupIngressInput) GoString added in v0.6.5 

func (s AuthorizeSecurityGroupIngressInput) GoString() string

GoString returns the string representation

func (AuthorizeSecurityGroupIngressInput) String added in v0.6.5 

func (s AuthorizeSecurityGroupIngressInput) String() string

String returns the string representation

type AuthorizeSecurityGroupIngressOutput 

type AuthorizeSecurityGroupIngressOutput struct {
	// contains filtered or unexported fields
}

func (AuthorizeSecurityGroupIngressOutput) GoString added in v0.6.5 

func (s AuthorizeSecurityGroupIngressOutput) GoString() string

GoString returns the string representation

func (AuthorizeSecurityGroupIngressOutput) String added in v0.6.5 

func (s AuthorizeSecurityGroupIngressOutput) String() string

String returns the string representation

type AvailabilityZone 

type AvailabilityZone struct {

	// Any messages about the Availability Zone.
	Messages []*AvailabilityZoneMessage `locationName:"messageSet" locationNameList:"item" type:"list"`

	// The name of the region.
	RegionName *string `locationName:"regionName" type:"string"`

	// The state of the Availability Zone.
	State *string `locationName:"zoneState" type:"string" enum:"AvailabilityZoneState"`

	// The name of the Availability Zone.
	ZoneName *string `locationName:"zoneName" type:"string"`
	// contains filtered or unexported fields
}

Describes an Availability Zone.

func (AvailabilityZone) GoString added in v0.6.5 

func (s AvailabilityZone) GoString() string

GoString returns the string representation

func (AvailabilityZone) String added in v0.6.5 

func (s AvailabilityZone) String() string

String returns the string representation

type AvailabilityZoneMessage 

type AvailabilityZoneMessage struct {

	// The message about the Availability Zone.
	Message *string `locationName:"message" type:"string"`
	// contains filtered or unexported fields
}

Describes a message about an Availability Zone.

func (AvailabilityZoneMessage) GoString added in v0.6.5 

func (s AvailabilityZoneMessage) GoString() string

GoString returns the string representation

func (AvailabilityZoneMessage) String added in v0.6.5 

func (s AvailabilityZoneMessage) String() string

String returns the string representation

type AvailableCapacity added in v1.0.1 

type AvailableCapacity struct {

	// The total number of instances that the Dedicated Host supports.
	AvailableInstanceCapacity []*InstanceCapacity `locationName:"availableInstanceCapacity" locationNameList:"item" type:"list"`

	// The number of vCPUs available on the Dedicated Host.
	AvailableVCpus *int64 `locationName:"availableVCpus" type:"integer"`
	// contains filtered or unexported fields
}

The capacity information for instances launched onto the Dedicated Host.

func (AvailableCapacity) GoString added in v1.0.1 

func (s AvailableCapacity) GoString() string

GoString returns the string representation

func (AvailableCapacity) String added in v1.0.1 

func (s AvailableCapacity) String() string

String returns the string representation

type BlobAttributeValue 

type BlobAttributeValue struct {

	// Value is automatically base64 encoded/decoded by the SDK.
	Value []byte `locationName:"value" type:"blob"`
	// contains filtered or unexported fields
}

func (BlobAttributeValue) GoString added in v0.6.5 

func (s BlobAttributeValue) GoString() string

GoString returns the string representation

func (BlobAttributeValue) String added in v0.6.5 

func (s BlobAttributeValue) String() string

String returns the string representation

type BlockDeviceMapping 

type BlockDeviceMapping struct {

	// The device name exposed to the instance (for example, /dev/sdh or xvdh).
	DeviceName *string `locationName:"deviceName" type:"string"`

	// Parameters used to automatically set up EBS volumes when the instance is
	// launched.
	Ebs *EbsBlockDevice `locationName:"ebs" type:"structure"`

	// Suppresses the specified device included in the block device mapping of the
	// AMI.
	NoDevice *string `locationName:"noDevice" type:"string"`

	// The virtual device name (ephemeralN). Instance store volumes are numbered
	// starting from 0. An instance type with 2 available instance store volumes
	// can specify mappings for ephemeral0 and ephemeral1.The number of available
	// instance store volumes depends on the instance type. After you connect to
	// the instance, you must mount the volume.
	//
	// Constraints: For M3 instances, you must specify instance store volumes in
	// the block device mapping for the instance. When you launch an M3 instance,
	// we ignore any instance store volumes specified in the block device mapping
	// for the AMI.
	VirtualName *string `locationName:"virtualName" type:"string"`
	// contains filtered or unexported fields
}

Describes a block device mapping.

func (BlockDeviceMapping) GoString added in v0.6.5 

func (s BlockDeviceMapping) GoString() string

GoString returns the string representation

func (BlockDeviceMapping) String added in v0.6.5 

func (s BlockDeviceMapping) String() string

String returns the string representation

type BundleInstanceInput 

type BundleInstanceInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance to bundle.
	//
	// Type: String
	//
	// Default: None
	//
	// Required: Yes
	InstanceId *string `type:"string" required:"true"`

	// The bucket in which to store the AMI. You can specify a bucket that you already
	// own or a new bucket that Amazon EC2 creates on your behalf. If you specify
	// a bucket that belongs to someone else, Amazon EC2 returns an error.
	Storage *Storage `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for BundleInstance.

func (BundleInstanceInput) GoString added in v0.6.5 

func (s BundleInstanceInput) GoString() string

GoString returns the string representation

func (BundleInstanceInput) String added in v0.6.5 

func (s BundleInstanceInput) String() string

String returns the string representation

func (*BundleInstanceInput) Validate added in v1.1.21 

func (s *BundleInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BundleInstanceOutput 

type BundleInstanceOutput struct {

	// Information about the bundle task.
	BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of BundleInstance.

func (BundleInstanceOutput) GoString added in v0.6.5 

func (s BundleInstanceOutput) GoString() string

GoString returns the string representation

func (BundleInstanceOutput) String added in v0.6.5 

func (s BundleInstanceOutput) String() string

String returns the string representation

type BundleTask 

type BundleTask struct {

	// The ID of the bundle task.
	BundleId *string `locationName:"bundleId" type:"string"`

	// If the task fails, a description of the error.
	BundleTaskError *BundleTaskError `locationName:"error" type:"structure"`

	// The ID of the instance associated with this bundle task.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The level of task completion, as a percent (for example, 20%).
	Progress *string `locationName:"progress" type:"string"`

	// The time this task started.
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"`

	// The state of the task.
	State *string `locationName:"state" type:"string" enum:"BundleTaskState"`

	// The Amazon S3 storage locations.
	Storage *Storage `locationName:"storage" type:"structure"`

	// The time of the most recent update for the task.
	UpdateTime *time.Time `locationName:"updateTime" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a bundle task.

func (BundleTask) GoString added in v0.6.5 

func (s BundleTask) GoString() string

GoString returns the string representation

func (BundleTask) String added in v0.6.5 

func (s BundleTask) String() string

String returns the string representation

type BundleTaskError 

type BundleTaskError struct {

	// The error code.
	Code *string `locationName:"code" type:"string"`

	// The error message.
	Message *string `locationName:"message" type:"string"`
	// contains filtered or unexported fields
}

Describes an error for BundleInstance.

func (BundleTaskError) GoString added in v0.6.5 

func (s BundleTaskError) GoString() string

GoString returns the string representation

func (BundleTaskError) String added in v0.6.5 

func (s BundleTaskError) String() string

String returns the string representation

type CancelBundleTaskInput 

type CancelBundleTaskInput struct {

	// The ID of the bundle task.
	BundleId *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelBundleTask.

func (CancelBundleTaskInput) GoString added in v0.6.5 

func (s CancelBundleTaskInput) GoString() string

GoString returns the string representation

func (CancelBundleTaskInput) String added in v0.6.5 

func (s CancelBundleTaskInput) String() string

String returns the string representation

func (*CancelBundleTaskInput) Validate added in v1.1.21 

func (s *CancelBundleTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelBundleTaskOutput 

type CancelBundleTaskOutput struct {

	// Information about the bundle task.
	BundleTask *BundleTask `locationName:"bundleInstanceTask" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CancelBundleTask.

func (CancelBundleTaskOutput) GoString added in v0.6.5 

func (s CancelBundleTaskOutput) GoString() string

GoString returns the string representation

func (CancelBundleTaskOutput) String added in v0.6.5 

func (s CancelBundleTaskOutput) String() string

String returns the string representation

type CancelConversionTaskInput 

type CancelConversionTaskInput struct {

	// The ID of the conversion task.
	ConversionTaskId *string `locationName:"conversionTaskId" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The reason for canceling the conversion task.
	ReasonMessage *string `locationName:"reasonMessage" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelConversionTask.

func (CancelConversionTaskInput) GoString added in v0.6.5 

func (s CancelConversionTaskInput) GoString() string

GoString returns the string representation

func (CancelConversionTaskInput) String added in v0.6.5 

func (s CancelConversionTaskInput) String() string

String returns the string representation

func (*CancelConversionTaskInput) Validate added in v1.1.21 

func (s *CancelConversionTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelConversionTaskOutput 

type CancelConversionTaskOutput struct {
	// contains filtered or unexported fields
}

func (CancelConversionTaskOutput) GoString added in v0.6.5 

func (s CancelConversionTaskOutput) GoString() string

GoString returns the string representation

func (CancelConversionTaskOutput) String added in v0.6.5 

func (s CancelConversionTaskOutput) String() string

String returns the string representation

type CancelExportTaskInput 

type CancelExportTaskInput struct {

	// The ID of the export task. This is the ID returned by CreateInstanceExportTask.
	ExportTaskId *string `locationName:"exportTaskId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelExportTask.

func (CancelExportTaskInput) GoString added in v0.6.5 

func (s CancelExportTaskInput) GoString() string

GoString returns the string representation

func (CancelExportTaskInput) String added in v0.6.5 

func (s CancelExportTaskInput) String() string

String returns the string representation

func (*CancelExportTaskInput) Validate added in v1.1.21 

func (s *CancelExportTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelExportTaskOutput 

type CancelExportTaskOutput struct {
	// contains filtered or unexported fields
}

func (CancelExportTaskOutput) GoString added in v0.6.5 

func (s CancelExportTaskOutput) GoString() string

GoString returns the string representation

func (CancelExportTaskOutput) String added in v0.6.5 

func (s CancelExportTaskOutput) String() string

String returns the string representation

type CancelImportTaskInput 

type CancelImportTaskInput struct {

	// The reason for canceling the task.
	CancelReason *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The ID of the import image or import snapshot task to be canceled.
	ImportTaskId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelImportTask.

func (CancelImportTaskInput) GoString added in v0.6.5 

func (s CancelImportTaskInput) GoString() string

GoString returns the string representation

func (CancelImportTaskInput) String added in v0.6.5 

func (s CancelImportTaskInput) String() string

String returns the string representation

type CancelImportTaskOutput 

type CancelImportTaskOutput struct {

	// The ID of the task being canceled.
	ImportTaskId *string `locationName:"importTaskId" type:"string"`

	// The current state of the task being canceled.
	PreviousState *string `locationName:"previousState" type:"string"`

	// The current state of the task being canceled.
	State *string `locationName:"state" type:"string"`
	// contains filtered or unexported fields
}

Contains the output for CancelImportTask.

func (CancelImportTaskOutput) GoString added in v0.6.5 

func (s CancelImportTaskOutput) GoString() string

GoString returns the string representation

func (CancelImportTaskOutput) String added in v0.6.5 

func (s CancelImportTaskOutput) String() string

String returns the string representation

type CancelReservedInstancesListingInput 

type CancelReservedInstancesListingInput struct {

	// The ID of the Reserved Instance listing.
	ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelReservedInstancesListing.

func (CancelReservedInstancesListingInput) GoString added in v0.6.5 

func (s CancelReservedInstancesListingInput) GoString() string

GoString returns the string representation

func (CancelReservedInstancesListingInput) String added in v0.6.5 

func (s CancelReservedInstancesListingInput) String() string

String returns the string representation

func (*CancelReservedInstancesListingInput) Validate added in v1.1.21 

func (s *CancelReservedInstancesListingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelReservedInstancesListingOutput 

type CancelReservedInstancesListingOutput struct {

	// The Reserved Instance listing.
	ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CancelReservedInstancesListing.

func (CancelReservedInstancesListingOutput) GoString added in v0.6.5 

func (s CancelReservedInstancesListingOutput) GoString() string

GoString returns the string representation

func (CancelReservedInstancesListingOutput) String added in v0.6.5 

func (s CancelReservedInstancesListingOutput) String() string

String returns the string representation

type CancelSpotFleetRequestsError 

type CancelSpotFleetRequestsError struct {

	// The error code.
	Code *string `locationName:"code" type:"string" required:"true" enum:"CancelBatchErrorCode"`

	// The description for the error code.
	Message *string `locationName:"message" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a Spot fleet error.

func (CancelSpotFleetRequestsError) GoString added in v0.6.5 

func (s CancelSpotFleetRequestsError) GoString() string

GoString returns the string representation

func (CancelSpotFleetRequestsError) String added in v0.6.5 

func (s CancelSpotFleetRequestsError) String() string

String returns the string representation

type CancelSpotFleetRequestsErrorItem 

type CancelSpotFleetRequestsErrorItem struct {

	// The error.
	Error *CancelSpotFleetRequestsError `locationName:"error" type:"structure" required:"true"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a Spot fleet request that was not successfully canceled.

func (CancelSpotFleetRequestsErrorItem) GoString added in v0.6.5 

func (s CancelSpotFleetRequestsErrorItem) GoString() string

GoString returns the string representation

func (CancelSpotFleetRequestsErrorItem) String added in v0.6.5 

func (s CancelSpotFleetRequestsErrorItem) String() string

String returns the string representation

type CancelSpotFleetRequestsInput 

type CancelSpotFleetRequestsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The IDs of the Spot fleet requests.
	SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list" required:"true"`

	// Indicates whether to terminate instances for a Spot fleet request if it is
	// canceled successfully.
	TerminateInstances *bool `locationName:"terminateInstances" type:"boolean" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelSpotFleetRequests.

func (CancelSpotFleetRequestsInput) GoString added in v0.6.5 

func (s CancelSpotFleetRequestsInput) GoString() string

GoString returns the string representation

func (CancelSpotFleetRequestsInput) String added in v0.6.5 

func (s CancelSpotFleetRequestsInput) String() string

String returns the string representation

func (*CancelSpotFleetRequestsInput) Validate added in v1.1.21 

func (s *CancelSpotFleetRequestsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelSpotFleetRequestsOutput 

type CancelSpotFleetRequestsOutput struct {

	// Information about the Spot fleet requests that are successfully canceled.
	SuccessfulFleetRequests []*CancelSpotFleetRequestsSuccessItem `locationName:"successfulFleetRequestSet" locationNameList:"item" type:"list"`

	// Information about the Spot fleet requests that are not successfully canceled.
	UnsuccessfulFleetRequests []*CancelSpotFleetRequestsErrorItem `locationName:"unsuccessfulFleetRequestSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CancelSpotFleetRequests.

func (CancelSpotFleetRequestsOutput) GoString added in v0.6.5 

func (s CancelSpotFleetRequestsOutput) GoString() string

GoString returns the string representation

func (CancelSpotFleetRequestsOutput) String added in v0.6.5 

func (s CancelSpotFleetRequestsOutput) String() string

String returns the string representation

type CancelSpotFleetRequestsSuccessItem 

type CancelSpotFleetRequestsSuccessItem struct {

	// The current state of the Spot fleet request.
	CurrentSpotFleetRequestState *string `locationName:"currentSpotFleetRequestState" type:"string" required:"true" enum:"BatchState"`

	// The previous state of the Spot fleet request.
	PreviousSpotFleetRequestState *string `locationName:"previousSpotFleetRequestState" type:"string" required:"true" enum:"BatchState"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a Spot fleet request that was successfully canceled.

func (CancelSpotFleetRequestsSuccessItem) GoString added in v0.6.5 

func (s CancelSpotFleetRequestsSuccessItem) GoString() string

GoString returns the string representation

func (CancelSpotFleetRequestsSuccessItem) String added in v0.6.5 

func (s CancelSpotFleetRequestsSuccessItem) String() string

String returns the string representation

type CancelSpotInstanceRequestsInput 

type CancelSpotInstanceRequestsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more Spot instance request IDs.
	SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CancelSpotInstanceRequests.

func (CancelSpotInstanceRequestsInput) GoString added in v0.6.5 

func (s CancelSpotInstanceRequestsInput) GoString() string

GoString returns the string representation

func (CancelSpotInstanceRequestsInput) String added in v0.6.5 

func (s CancelSpotInstanceRequestsInput) String() string

String returns the string representation

func (*CancelSpotInstanceRequestsInput) Validate added in v1.1.21 

func (s *CancelSpotInstanceRequestsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelSpotInstanceRequestsOutput 

type CancelSpotInstanceRequestsOutput struct {

	// One or more Spot instance requests.
	CancelledSpotInstanceRequests []*CancelledSpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CancelSpotInstanceRequests.

func (CancelSpotInstanceRequestsOutput) GoString added in v0.6.5 

func (s CancelSpotInstanceRequestsOutput) GoString() string

GoString returns the string representation

func (CancelSpotInstanceRequestsOutput) String added in v0.6.5 

func (s CancelSpotInstanceRequestsOutput) String() string

String returns the string representation

type CancelledSpotInstanceRequest 

type CancelledSpotInstanceRequest struct {

	// The ID of the Spot instance request.
	SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"`

	// The state of the Spot instance request.
	State *string `locationName:"state" type:"string" enum:"CancelSpotInstanceRequestState"`
	// contains filtered or unexported fields
}

Describes a request to cancel a Spot instance.

func (CancelledSpotInstanceRequest) GoString added in v0.6.5 

func (s CancelledSpotInstanceRequest) GoString() string

GoString returns the string representation

func (CancelledSpotInstanceRequest) String added in v0.6.5 

func (s CancelledSpotInstanceRequest) String() string

String returns the string representation

type ClassicLinkDnsSupport added in v1.0.8 

type ClassicLinkDnsSupport struct {

	// Indicates whether ClassicLink DNS support is enabled for the VPC.
	ClassicLinkDnsSupported *bool `locationName:"classicLinkDnsSupported" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes the ClassicLink DNS support status of a VPC.

func (ClassicLinkDnsSupport) GoString added in v1.0.8 

func (s ClassicLinkDnsSupport) GoString() string

GoString returns the string representation

func (ClassicLinkDnsSupport) String added in v1.0.8 

func (s ClassicLinkDnsSupport) String() string

String returns the string representation

type ClassicLinkInstance 

type ClassicLinkInstance struct {

	// A list of security groups.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// Any tags assigned to the instance.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a linked EC2-Classic instance.

func (ClassicLinkInstance) GoString added in v0.6.5 

func (s ClassicLinkInstance) GoString() string

GoString returns the string representation

func (ClassicLinkInstance) String added in v0.6.5 

func (s ClassicLinkInstance) String() string

String returns the string representation

type ClientData 

type ClientData struct {

	// A user-defined comment about the disk upload.
	Comment *string `type:"string"`

	// The time that the disk upload ends.
	UploadEnd *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The size of the uploaded disk image, in GiB.
	UploadSize *float64 `type:"double"`

	// The time that the disk upload starts.
	UploadStart *time.Time `type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes the client-specific data.

func (ClientData) GoString added in v0.6.5 

func (s ClientData) GoString() string

GoString returns the string representation

func (ClientData) String added in v0.6.5 

func (s ClientData) String() string

String returns the string representation

type ConfirmProductInstanceInput 

type ConfirmProductInstanceInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `type:"string" required:"true"`

	// The product code. This must be a product code that you own.
	ProductCode *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ConfirmProductInstance.

func (ConfirmProductInstanceInput) GoString added in v0.6.5 

func (s ConfirmProductInstanceInput) GoString() string

GoString returns the string representation

func (ConfirmProductInstanceInput) String added in v0.6.5 

func (s ConfirmProductInstanceInput) String() string

String returns the string representation

func (*ConfirmProductInstanceInput) Validate added in v1.1.21 

func (s *ConfirmProductInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmProductInstanceOutput 

type ConfirmProductInstanceOutput struct {

	// The AWS account ID of the instance owner. This is only present if the product
	// code is attached to the instance.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The return value of the request. Returns true if the specified product code
	// is owned by the requester and associated with the specified instance.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of ConfirmProductInstance.

func (ConfirmProductInstanceOutput) GoString added in v0.6.5 

func (s ConfirmProductInstanceOutput) GoString() string

GoString returns the string representation

func (ConfirmProductInstanceOutput) String added in v0.6.5 

func (s ConfirmProductInstanceOutput) String() string

String returns the string representation

type ConversionTask 

type ConversionTask struct {

	// The ID of the conversion task.
	ConversionTaskId *string `locationName:"conversionTaskId" type:"string" required:"true"`

	// The time when the task expires. If the upload isn't complete before the expiration
	// time, we automatically cancel the task.
	ExpirationTime *string `locationName:"expirationTime" type:"string"`

	// If the task is for importing an instance, this contains information about
	// the import instance task.
	ImportInstance *ImportInstanceTaskDetails `locationName:"importInstance" type:"structure"`

	// If the task is for importing a volume, this contains information about the
	// import volume task.
	ImportVolume *ImportVolumeTaskDetails `locationName:"importVolume" type:"structure"`

	// The state of the conversion task.
	State *string `locationName:"state" type:"string" required:"true" enum:"ConversionTaskState"`

	// The status message related to the conversion task.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// Any tags assigned to the task.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a conversion task.

func (ConversionTask) GoString added in v0.6.5 

func (s ConversionTask) GoString() string

GoString returns the string representation

func (ConversionTask) String added in v0.6.5 

func (s ConversionTask) String() string

String returns the string representation

type CopyImageInput 

type CopyImageInput struct {

	// Unique, case-sensitive identifier you provide to ensure idempotency of the
	// request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	ClientToken *string `type:"string"`

	// A description for the new AMI in the destination region.
	Description *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Specifies whether the destination snapshots of the copied image should be
	// encrypted. The default CMK for EBS is used unless a non-default AWS Key Management
	// Service (AWS KMS) CMK is specified with KmsKeyId. For more information, see
	// Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// The full ARN of the AWS Key Management Service (AWS KMS) CMK to use when
	// encrypting the snapshots of an image during a copy operation. This parameter
	// is only required if you want to use a non-default CMK; if this parameter
	// is not specified, the default CMK for EBS is used. The ARN contains the arn:aws:kms
	// namespace, followed by the region of the CMK, the AWS account ID of the CMK
	// owner, the key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef.
	// The specified CMK must exist in the region that the snapshot is being copied
	// to. If a KmsKeyId is specified, the Encrypted flag must also be set.
	KmsKeyId *string `locationName:"kmsKeyId" type:"string"`

	// The name of the new AMI in the destination region.
	Name *string `type:"string" required:"true"`

	// The ID of the AMI to copy.
	SourceImageId *string `type:"string" required:"true"`

	// The name of the region that contains the AMI to copy.
	SourceRegion *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CopyImage.

func (CopyImageInput) GoString added in v0.6.5 

func (s CopyImageInput) GoString() string

GoString returns the string representation

func (CopyImageInput) String added in v0.6.5 

func (s CopyImageInput) String() string

String returns the string representation

func (*CopyImageInput) Validate added in v1.1.21 

func (s *CopyImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CopyImageOutput 

type CopyImageOutput struct {

	// The ID of the new AMI.
	ImageId *string `locationName:"imageId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of CopyImage.

func (CopyImageOutput) GoString added in v0.6.5 

func (s CopyImageOutput) GoString() string

GoString returns the string representation

func (CopyImageOutput) String added in v0.6.5 

func (s CopyImageOutput) String() string

String returns the string representation

type CopySnapshotInput 

type CopySnapshotInput struct {

	// A description for the EBS snapshot.
	Description *string `type:"string"`

	// The destination region to use in the PresignedUrl parameter of a snapshot
	// copy operation. This parameter is only valid for specifying the destination
	// region in a PresignedUrl parameter, where it is required.
	//
	//   CopySnapshot sends the snapshot copy to the regional endpoint that you
	// send the HTTP request to, such as ec2.us-east-1.amazonaws.com (in the AWS
	// CLI, this is specified with the --region parameter or the default region
	// in your AWS configuration file).
	DestinationRegion *string `locationName:"destinationRegion" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Specifies whether the destination snapshot should be encrypted. You can encrypt
	// a copy of an unencrypted snapshot using this flag, but you cannot use it
	// to create an unencrypted copy from an encrypted snapshot. Your default CMK
	// for EBS is used unless a non-default AWS Key Management Service (AWS KMS)
	// CMK is specified with KmsKeyId. For more information, see Amazon EBS Encryption
	// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) in
	// the Amazon Elastic Compute Cloud User Guide.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// The full ARN of the AWS Key Management Service (AWS KMS) CMK to use when
	// creating the snapshot copy. This parameter is only required if you want to
	// use a non-default CMK; if this parameter is not specified, the default CMK
	// for EBS is used. The ARN contains the arn:aws:kms namespace, followed by
	// the region of the CMK, the AWS account ID of the CMK owner, the key namespace,
	// and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef.
	// The specified CMK must exist in the region that the snapshot is being copied
	// to. If a KmsKeyId is specified, the Encrypted flag must also be set.
	KmsKeyId *string `locationName:"kmsKeyId" type:"string"`

	// The pre-signed URL that facilitates copying an encrypted snapshot. This parameter
	// is only required when copying an encrypted snapshot with the Amazon EC2 Query
	// API; it is available as an optional parameter in all other cases. The PresignedUrl
	// should use the snapshot source endpoint, the CopySnapshot action, and include
	// the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The
	// PresignedUrl must be signed using AWS Signature Version 4. Because EBS snapshots
	// are stored in Amazon S3, the signing algorithm for this parameter uses the
	// same logic that is described in Authenticating Requests by Using Query Parameters
	// (AWS Signature Version 4) (http://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html)
	// in the Amazon Simple Storage Service API Reference. An invalid or improperly
	// signed PresignedUrl will cause the copy operation to fail asynchronously,
	// and the snapshot will move to an error state.
	PresignedUrl *string `locationName:"presignedUrl" type:"string"`

	// The ID of the region that contains the snapshot to be copied.
	SourceRegion *string `type:"string" required:"true"`

	// The ID of the EBS snapshot to copy.
	SourceSnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CopySnapshot.

func (CopySnapshotInput) GoString added in v0.6.5 

func (s CopySnapshotInput) GoString() string

GoString returns the string representation

func (CopySnapshotInput) String added in v0.6.5 

func (s CopySnapshotInput) String() string

String returns the string representation

func (*CopySnapshotInput) Validate added in v1.1.21 

func (s *CopySnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CopySnapshotOutput 

type CopySnapshotOutput struct {

	// The ID of the new snapshot.
	SnapshotId *string `locationName:"snapshotId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of CopySnapshot.

func (CopySnapshotOutput) GoString added in v0.6.5 

func (s CopySnapshotOutput) GoString() string

GoString returns the string representation

func (CopySnapshotOutput) String added in v0.6.5 

func (s CopySnapshotOutput) String() string

String returns the string representation

type CreateCustomerGatewayInput 

type CreateCustomerGatewayInput struct {

	// For devices that support BGP, the customer gateway's BGP ASN.
	//
	// Default: 65000
	BgpAsn *int64 `type:"integer" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The Internet-routable IP address for the customer gateway's outside interface.
	// The address must be static.
	PublicIp *string `locationName:"IpAddress" type:"string" required:"true"`

	// The type of VPN connection that this customer gateway supports (ipsec.1).
	Type *string `type:"string" required:"true" enum:"GatewayType"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateCustomerGateway.

func (CreateCustomerGatewayInput) GoString added in v0.6.5 

func (s CreateCustomerGatewayInput) GoString() string

GoString returns the string representation

func (CreateCustomerGatewayInput) String added in v0.6.5 

func (s CreateCustomerGatewayInput) String() string

String returns the string representation

func (*CreateCustomerGatewayInput) Validate added in v1.1.21 

func (s *CreateCustomerGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateCustomerGatewayOutput 

type CreateCustomerGatewayOutput struct {

	// Information about the customer gateway.
	CustomerGateway *CustomerGateway `locationName:"customerGateway" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateCustomerGateway.

func (CreateCustomerGatewayOutput) GoString added in v0.6.5 

func (s CreateCustomerGatewayOutput) GoString() string

GoString returns the string representation

func (CreateCustomerGatewayOutput) String added in v0.6.5 

func (s CreateCustomerGatewayOutput) String() string

String returns the string representation

type CreateDhcpOptionsInput added in v0.9.5 

type CreateDhcpOptionsInput struct {

	// A DHCP configuration option.
	DhcpConfigurations []*NewDhcpConfiguration `locationName:"dhcpConfiguration" locationNameList:"item" type:"list" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateDhcpOptions.

func (CreateDhcpOptionsInput) GoString added in v0.9.5 

func (s CreateDhcpOptionsInput) GoString() string

GoString returns the string representation

func (CreateDhcpOptionsInput) String added in v0.9.5 

func (s CreateDhcpOptionsInput) String() string

String returns the string representation

func (*CreateDhcpOptionsInput) Validate added in v1.1.21 

func (s *CreateDhcpOptionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDhcpOptionsOutput added in v0.9.5 

type CreateDhcpOptionsOutput struct {

	// A set of DHCP options.
	DhcpOptions *DhcpOptions `locationName:"dhcpOptions" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateDhcpOptions.

func (CreateDhcpOptionsOutput) GoString added in v0.9.5 

func (s CreateDhcpOptionsOutput) GoString() string

GoString returns the string representation

func (CreateDhcpOptionsOutput) String added in v0.9.5 

func (s CreateDhcpOptionsOutput) String() string

String returns the string representation

type CreateFlowLogsInput added in v0.6.2 

type CreateFlowLogsInput struct {

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html).
	ClientToken *string `type:"string"`

	// The ARN for the IAM role that's used to post flow logs to a CloudWatch Logs
	// log group.
	DeliverLogsPermissionArn *string `type:"string" required:"true"`

	// The name of the CloudWatch log group.
	LogGroupName *string `type:"string" required:"true"`

	// One or more subnet, network interface, or VPC IDs.
	//
	// Constraints: Maximum of 1000 resources
	ResourceIds []*string `locationName:"ResourceId" locationNameList:"item" type:"list" required:"true"`

	// The type of resource on which to create the flow log.
	ResourceType *string `type:"string" required:"true" enum:"FlowLogsResourceType"`

	// The type of traffic to log.
	TrafficType *string `type:"string" required:"true" enum:"TrafficType"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateFlowLogs.

func (CreateFlowLogsInput) GoString added in v0.6.5 

func (s CreateFlowLogsInput) GoString() string

GoString returns the string representation

func (CreateFlowLogsInput) String added in v0.6.5 

func (s CreateFlowLogsInput) String() string

String returns the string representation

func (*CreateFlowLogsInput) Validate added in v1.1.21 

func (s *CreateFlowLogsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateFlowLogsOutput added in v0.6.2 

type CreateFlowLogsOutput struct {

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The IDs of the flow logs.
	FlowLogIds []*string `locationName:"flowLogIdSet" locationNameList:"item" type:"list"`

	// Information about the flow logs that could not be created successfully.
	Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateFlowLogs.

func (CreateFlowLogsOutput) GoString added in v0.6.5 

func (s CreateFlowLogsOutput) GoString() string

GoString returns the string representation

func (CreateFlowLogsOutput) String added in v0.6.5 

func (s CreateFlowLogsOutput) String() string

String returns the string representation

type CreateImageInput 

type CreateImageInput struct {

	// Information about one or more block device mappings.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"`

	// A description for the new image.
	Description *string `locationName:"description" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// A name for the new image.
	//
	// Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets
	// ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('),
	// at-signs (@), or underscores(_)
	Name *string `locationName:"name" type:"string" required:"true"`

	// By default, Amazon EC2 attempts to shut down and reboot the instance before
	// creating the image. If the 'No Reboot' option is set, Amazon EC2 doesn't
	// shut down the instance before creating the image. When this option is used,
	// file system integrity on the created image can't be guaranteed.
	NoReboot *bool `locationName:"noReboot" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateImage.

func (CreateImageInput) GoString added in v0.6.5 

func (s CreateImageInput) GoString() string

GoString returns the string representation

func (CreateImageInput) String added in v0.6.5 

func (s CreateImageInput) String() string

String returns the string representation

func (*CreateImageInput) Validate added in v1.1.21 

func (s *CreateImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateImageOutput 

type CreateImageOutput struct {

	// The ID of the new AMI.
	ImageId *string `locationName:"imageId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of CreateImage.

func (CreateImageOutput) GoString added in v0.6.5 

func (s CreateImageOutput) GoString() string

GoString returns the string representation

func (CreateImageOutput) String added in v0.6.5 

func (s CreateImageOutput) String() string

String returns the string representation

type CreateInstanceExportTaskInput 

type CreateInstanceExportTaskInput struct {

	// A description for the conversion task or the resource being exported. The
	// maximum length is 255 bytes.
	Description *string `locationName:"description" type:"string"`

	// The format and location for an instance export task.
	ExportToS3Task *ExportToS3TaskSpecification `locationName:"exportToS3" type:"structure"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// The target virtualization environment.
	TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateInstanceExportTask.

func (CreateInstanceExportTaskInput) GoString added in v0.6.5 

func (s CreateInstanceExportTaskInput) GoString() string

GoString returns the string representation

func (CreateInstanceExportTaskInput) String added in v0.6.5 

func (s CreateInstanceExportTaskInput) String() string

String returns the string representation

func (*CreateInstanceExportTaskInput) Validate added in v1.1.21 

func (s *CreateInstanceExportTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateInstanceExportTaskOutput 

type CreateInstanceExportTaskOutput struct {

	// Information about the instance export task.
	ExportTask *ExportTask `locationName:"exportTask" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output for CreateInstanceExportTask.

func (CreateInstanceExportTaskOutput) GoString added in v0.6.5 

func (s CreateInstanceExportTaskOutput) GoString() string

GoString returns the string representation

func (CreateInstanceExportTaskOutput) String added in v0.6.5 

func (s CreateInstanceExportTaskOutput) String() string

String returns the string representation

type CreateInternetGatewayInput 

type CreateInternetGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateInternetGateway.

func (CreateInternetGatewayInput) GoString added in v0.6.5 

func (s CreateInternetGatewayInput) GoString() string

GoString returns the string representation

func (CreateInternetGatewayInput) String added in v0.6.5 

func (s CreateInternetGatewayInput) String() string

String returns the string representation

type CreateInternetGatewayOutput 

type CreateInternetGatewayOutput struct {

	// Information about the Internet gateway.
	InternetGateway *InternetGateway `locationName:"internetGateway" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateInternetGateway.

func (CreateInternetGatewayOutput) GoString added in v0.6.5 

func (s CreateInternetGatewayOutput) GoString() string

GoString returns the string representation

func (CreateInternetGatewayOutput) String added in v0.6.5 

func (s CreateInternetGatewayOutput) String() string

String returns the string representation

type CreateKeyPairInput 

type CreateKeyPairInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// A unique name for the key pair.
	//
	// Constraints: Up to 255 ASCII characters
	KeyName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateKeyPair.

func (CreateKeyPairInput) GoString added in v0.6.5 

func (s CreateKeyPairInput) GoString() string

GoString returns the string representation

func (CreateKeyPairInput) String added in v0.6.5 

func (s CreateKeyPairInput) String() string

String returns the string representation

func (*CreateKeyPairInput) Validate added in v1.1.21 

func (s *CreateKeyPairInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateKeyPairOutput 

type CreateKeyPairOutput struct {

	// The SHA-1 digest of the DER encoded private key.
	KeyFingerprint *string `locationName:"keyFingerprint" type:"string"`

	// An unencrypted PEM encoded RSA private key.
	KeyMaterial *string `locationName:"keyMaterial" type:"string"`

	// The name of the key pair.
	KeyName *string `locationName:"keyName" type:"string"`
	// contains filtered or unexported fields
}

Describes a key pair.

func (CreateKeyPairOutput) GoString added in v0.6.5 

func (s CreateKeyPairOutput) GoString() string

GoString returns the string representation

func (CreateKeyPairOutput) String added in v0.6.5 

func (s CreateKeyPairOutput) String() string

String returns the string representation

type CreateNatGatewayInput added in v1.0.6 

type CreateNatGatewayInput struct {

	// The allocation ID of an Elastic IP address to associate with the NAT gateway.
	// If the Elastic IP address is associated with another resource, you must first
	// disassociate it.
	AllocationId *string `type:"string" required:"true"`

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	//
	// Constraint: Maximum 64 ASCII characters.
	ClientToken *string `type:"string"`

	// The subnet in which to create the NAT gateway.
	SubnetId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateNatGateway.

func (CreateNatGatewayInput) GoString added in v1.0.6 

func (s CreateNatGatewayInput) GoString() string

GoString returns the string representation

func (CreateNatGatewayInput) String added in v1.0.6 

func (s CreateNatGatewayInput) String() string

String returns the string representation

func (*CreateNatGatewayInput) Validate added in v1.1.21 

func (s *CreateNatGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateNatGatewayOutput added in v1.0.6 

type CreateNatGatewayOutput struct {

	// Unique, case-sensitive identifier to ensure the idempotency of the request.
	// Only returned if a client token was provided in the request.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Information about the NAT gateway.
	NatGateway *NatGateway `locationName:"natGateway" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateNatGateway.

func (CreateNatGatewayOutput) GoString added in v1.0.6 

func (s CreateNatGatewayOutput) GoString() string

GoString returns the string representation

func (CreateNatGatewayOutput) String added in v1.0.6 

func (s CreateNatGatewayOutput) String() string

String returns the string representation

type CreateNetworkAclEntryInput added in v0.9.5 

type CreateNetworkAclEntryInput struct {

	// The network range to allow or deny, in CIDR notation (for example 172.16.0.0/24).
	CidrBlock *string `locationName:"cidrBlock" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Indicates whether this is an egress rule (rule is applied to traffic leaving
	// the subnet).
	Egress *bool `locationName:"egress" type:"boolean" required:"true"`

	// ICMP protocol: The ICMP type and code. Required if specifying ICMP for the
	// protocol.
	IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"`

	// The ID of the network ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"`

	// TCP or UDP protocols: The range of ports the rule applies to.
	PortRange *PortRange `locationName:"portRange" type:"structure"`

	// The protocol. A value of -1 means all protocols.
	Protocol *string `locationName:"protocol" type:"string" required:"true"`

	// Indicates whether to allow or deny the traffic that matches the rule.
	RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"`

	// The rule number for the entry (for example, 100). ACL entries are processed
	// in ascending order by rule number.
	//
	// Constraints: Positive integer from 1 to 32766. The range 32767 to 65535
	// is reserved for internal use.
	RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateNetworkAclEntry.

func (CreateNetworkAclEntryInput) GoString added in v0.9.5 

func (s CreateNetworkAclEntryInput) GoString() string

GoString returns the string representation

func (CreateNetworkAclEntryInput) String added in v0.9.5 

func (s CreateNetworkAclEntryInput) String() string

String returns the string representation

func (*CreateNetworkAclEntryInput) Validate added in v1.1.21 

func (s *CreateNetworkAclEntryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateNetworkAclEntryOutput added in v0.9.5 

type CreateNetworkAclEntryOutput struct {
	// contains filtered or unexported fields
}

func (CreateNetworkAclEntryOutput) GoString added in v0.9.5 

func (s CreateNetworkAclEntryOutput) GoString() string

GoString returns the string representation

func (CreateNetworkAclEntryOutput) String added in v0.9.5 

func (s CreateNetworkAclEntryOutput) String() string

String returns the string representation

type CreateNetworkAclInput added in v0.9.5 

type CreateNetworkAclInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateNetworkAcl.

func (CreateNetworkAclInput) GoString added in v0.9.5 

func (s CreateNetworkAclInput) GoString() string

GoString returns the string representation

func (CreateNetworkAclInput) String added in v0.9.5 

func (s CreateNetworkAclInput) String() string

String returns the string representation

func (*CreateNetworkAclInput) Validate added in v1.1.21 

func (s *CreateNetworkAclInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateNetworkAclOutput added in v0.9.5 

type CreateNetworkAclOutput struct {

	// Information about the network ACL.
	NetworkAcl *NetworkAcl `locationName:"networkAcl" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateNetworkAcl.

func (CreateNetworkAclOutput) GoString added in v0.9.5 

func (s CreateNetworkAclOutput) GoString() string

GoString returns the string representation

func (CreateNetworkAclOutput) String added in v0.9.5 

func (s CreateNetworkAclOutput) String() string

String returns the string representation

type CreateNetworkInterfaceInput 

type CreateNetworkInterfaceInput struct {

	// A description for the network interface.
	Description *string `locationName:"description" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The IDs of one or more security groups.
	Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"`

	// The primary private IP address of the network interface. If you don't specify
	// an IP address, Amazon EC2 selects one for you from the subnet range. If you
	// specify an IP address, you cannot indicate any IP addresses specified in
	// privateIpAddresses as primary (only one IP address can be designated as primary).
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// One or more private IP addresses.
	PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddresses" locationNameList:"item" type:"list"`

	// The number of secondary private IP addresses to assign to a network interface.
	// When you specify a number of secondary IP addresses, Amazon EC2 selects these
	// IP addresses within the subnet range. You can't specify this option and specify
	// more than one private IP address using privateIpAddresses.
	//
	// The number of IP addresses you can assign to a network interface varies
	// by instance type. For more information, see Private IP Addresses Per ENI
	// Per Instance Type (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html#AvailableIpPerENI)
	// in the Amazon Elastic Compute Cloud User Guide.
	SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"`

	// The ID of the subnet to associate with the network interface.
	SubnetId *string `locationName:"subnetId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateNetworkInterface.

func (CreateNetworkInterfaceInput) GoString added in v0.6.5 

func (s CreateNetworkInterfaceInput) GoString() string

GoString returns the string representation

func (CreateNetworkInterfaceInput) String added in v0.6.5 

func (s CreateNetworkInterfaceInput) String() string

String returns the string representation

func (*CreateNetworkInterfaceInput) Validate added in v1.1.21 

func (s *CreateNetworkInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateNetworkInterfaceOutput 

type CreateNetworkInterfaceOutput struct {

	// Information about the network interface.
	NetworkInterface *NetworkInterface `locationName:"networkInterface" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateNetworkInterface.

func (CreateNetworkInterfaceOutput) GoString added in v0.6.5 

func (s CreateNetworkInterfaceOutput) GoString() string

GoString returns the string representation

func (CreateNetworkInterfaceOutput) String added in v0.6.5 

func (s CreateNetworkInterfaceOutput) String() string

String returns the string representation

type CreatePlacementGroupInput 

type CreatePlacementGroupInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// A name for the placement group.
	//
	// Constraints: Up to 255 ASCII characters
	GroupName *string `locationName:"groupName" type:"string" required:"true"`

	// The placement strategy.
	Strategy *string `locationName:"strategy" type:"string" required:"true" enum:"PlacementStrategy"`
	// contains filtered or unexported fields
}

Contains the parameters for CreatePlacementGroup.

func (CreatePlacementGroupInput) GoString added in v0.6.5 

func (s CreatePlacementGroupInput) GoString() string

GoString returns the string representation

func (CreatePlacementGroupInput) String added in v0.6.5 

func (s CreatePlacementGroupInput) String() string

String returns the string representation

func (*CreatePlacementGroupInput) Validate added in v1.1.21 

func (s *CreatePlacementGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreatePlacementGroupOutput 

type CreatePlacementGroupOutput struct {
	// contains filtered or unexported fields
}

func (CreatePlacementGroupOutput) GoString added in v0.6.5 

func (s CreatePlacementGroupOutput) GoString() string

GoString returns the string representation

func (CreatePlacementGroupOutput) String added in v0.6.5 

func (s CreatePlacementGroupOutput) String() string

String returns the string representation

type CreateReservedInstancesListingInput 

type CreateReservedInstancesListingInput struct {

	// Unique, case-sensitive identifier you provide to ensure idempotency of your
	// listings. This helps avoid duplicate listings. For more information, see
	// Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `locationName:"clientToken" type:"string" required:"true"`

	// The number of instances that are a part of a Reserved Instance account to
	// be listed in the Reserved Instance Marketplace. This number should be less
	// than or equal to the instance count associated with the Reserved Instance
	// ID specified in this call.
	InstanceCount *int64 `locationName:"instanceCount" type:"integer" required:"true"`

	// A list specifying the price of the Standard Reserved Instance for each month
	// remaining in the Reserved Instance term.
	PriceSchedules []*PriceScheduleSpecification `locationName:"priceSchedules" locationNameList:"item" type:"list" required:"true"`

	// The ID of the active Standard Reserved Instance.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateReservedInstancesListing.

func (CreateReservedInstancesListingInput) GoString added in v0.6.5 

func (s CreateReservedInstancesListingInput) GoString() string

GoString returns the string representation

func (CreateReservedInstancesListingInput) String added in v0.6.5 

func (s CreateReservedInstancesListingInput) String() string

String returns the string representation

func (*CreateReservedInstancesListingInput) Validate added in v1.1.21 

func (s *CreateReservedInstancesListingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateReservedInstancesListingOutput 

type CreateReservedInstancesListingOutput struct {

	// Information about the Standard Reserved Instance listing.
	ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateReservedInstancesListing.

func (CreateReservedInstancesListingOutput) GoString added in v0.6.5 

func (s CreateReservedInstancesListingOutput) GoString() string

GoString returns the string representation

func (CreateReservedInstancesListingOutput) String added in v0.6.5 

func (s CreateReservedInstancesListingOutput) String() string

String returns the string representation

type CreateRouteInput 

type CreateRouteInput struct {

	// The CIDR address block used for the destination match. Routing decisions
	// are based on the most specific match.
	DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of an Internet gateway or virtual private gateway attached to your
	// VPC.
	GatewayId *string `locationName:"gatewayId" type:"string"`

	// The ID of a NAT instance in your VPC. The operation fails if you specify
	// an instance ID unless exactly one network interface is attached.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The ID of a NAT gateway.
	NatGatewayId *string `locationName:"natGatewayId" type:"string"`

	// The ID of a network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The ID of the route table for the route.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`

	// The ID of a VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateRoute.

func (CreateRouteInput) GoString added in v0.6.5 

func (s CreateRouteInput) GoString() string

GoString returns the string representation

func (CreateRouteInput) String added in v0.6.5 

func (s CreateRouteInput) String() string

String returns the string representation

func (*CreateRouteInput) Validate added in v1.1.21 

func (s *CreateRouteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateRouteOutput 

type CreateRouteOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of CreateRoute.

func (CreateRouteOutput) GoString added in v0.6.5 

func (s CreateRouteOutput) GoString() string

GoString returns the string representation

func (CreateRouteOutput) String added in v0.6.5 

func (s CreateRouteOutput) String() string

String returns the string representation

type CreateRouteTableInput 

type CreateRouteTableInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateRouteTable.

func (CreateRouteTableInput) GoString added in v0.6.5 

func (s CreateRouteTableInput) GoString() string

GoString returns the string representation

func (CreateRouteTableInput) String added in v0.6.5 

func (s CreateRouteTableInput) String() string

String returns the string representation

func (*CreateRouteTableInput) Validate added in v1.1.21 

func (s *CreateRouteTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateRouteTableOutput 

type CreateRouteTableOutput struct {

	// Information about the route table.
	RouteTable *RouteTable `locationName:"routeTable" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateRouteTable.

func (CreateRouteTableOutput) GoString added in v0.6.5 

func (s CreateRouteTableOutput) GoString() string

GoString returns the string representation

func (CreateRouteTableOutput) String added in v0.6.5 

func (s CreateRouteTableOutput) String() string

String returns the string representation

type CreateSecurityGroupInput 

type CreateSecurityGroupInput struct {

	// A description for the security group. This is informational only.
	//
	// Constraints: Up to 255 characters in length
	//
	// Constraints for EC2-Classic: ASCII characters
	//
	// Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
	Description *string `locationName:"GroupDescription" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The name of the security group.
	//
	// Constraints: Up to 255 characters in length
	//
	// Constraints for EC2-Classic: ASCII characters
	//
	// Constraints for EC2-VPC: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
	GroupName *string `type:"string" required:"true"`

	// [EC2-VPC] The ID of the VPC. Required for EC2-VPC.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateSecurityGroup.

func (CreateSecurityGroupInput) GoString added in v0.6.5 

func (s CreateSecurityGroupInput) GoString() string

GoString returns the string representation

func (CreateSecurityGroupInput) String added in v0.6.5 

func (s CreateSecurityGroupInput) String() string

String returns the string representation

func (*CreateSecurityGroupInput) Validate added in v1.1.21 

func (s *CreateSecurityGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateSecurityGroupOutput 

type CreateSecurityGroupOutput struct {

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of CreateSecurityGroup.

func (CreateSecurityGroupOutput) GoString added in v0.6.5 

func (s CreateSecurityGroupOutput) GoString() string

GoString returns the string representation

func (CreateSecurityGroupOutput) String added in v0.6.5 

func (s CreateSecurityGroupOutput) String() string

String returns the string representation

type CreateSnapshotInput 

type CreateSnapshotInput struct {

	// A description for the snapshot.
	Description *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the EBS volume.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateSnapshot.

func (CreateSnapshotInput) GoString added in v0.6.5 

func (s CreateSnapshotInput) GoString() string

GoString returns the string representation

func (CreateSnapshotInput) String added in v0.6.5 

func (s CreateSnapshotInput) String() string

String returns the string representation

func (*CreateSnapshotInput) Validate added in v1.1.21 

func (s *CreateSnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateSpotDatafeedSubscriptionInput 

type CreateSpotDatafeedSubscriptionInput struct {

	// The Amazon S3 bucket in which to store the Spot instance data feed.
	Bucket *string `locationName:"bucket" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// A prefix for the data feed file names.
	Prefix *string `locationName:"prefix" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateSpotDatafeedSubscription.

func (CreateSpotDatafeedSubscriptionInput) GoString added in v0.6.5 

func (s CreateSpotDatafeedSubscriptionInput) GoString() string

GoString returns the string representation

func (CreateSpotDatafeedSubscriptionInput) String added in v0.6.5 

func (s CreateSpotDatafeedSubscriptionInput) String() string

String returns the string representation

func (*CreateSpotDatafeedSubscriptionInput) Validate added in v1.1.21 

func (s *CreateSpotDatafeedSubscriptionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateSpotDatafeedSubscriptionOutput 

type CreateSpotDatafeedSubscriptionOutput struct {

	// The Spot instance data feed subscription.
	SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateSpotDatafeedSubscription.

func (CreateSpotDatafeedSubscriptionOutput) GoString added in v0.6.5 

func (s CreateSpotDatafeedSubscriptionOutput) GoString() string

GoString returns the string representation

func (CreateSpotDatafeedSubscriptionOutput) String added in v0.6.5 

func (s CreateSpotDatafeedSubscriptionOutput) String() string

String returns the string representation

type CreateSubnetInput 

type CreateSubnetInput struct {

	// The Availability Zone for the subnet.
	//
	// Default: AWS selects one for you. If you create more than one subnet in
	// your VPC, we may not necessarily select a different zone for each subnet.
	AvailabilityZone *string `type:"string"`

	// The network range for the subnet, in CIDR notation. For example, 10.0.0.0/24.
	CidrBlock *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateSubnet.

func (CreateSubnetInput) GoString added in v0.6.5 

func (s CreateSubnetInput) GoString() string

GoString returns the string representation

func (CreateSubnetInput) String added in v0.6.5 

func (s CreateSubnetInput) String() string

String returns the string representation

func (*CreateSubnetInput) Validate added in v1.1.21 

func (s *CreateSubnetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateSubnetOutput 

type CreateSubnetOutput struct {

	// Information about the subnet.
	Subnet *Subnet `locationName:"subnet" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateSubnet.

func (CreateSubnetOutput) GoString added in v0.6.5 

func (s CreateSubnetOutput) GoString() string

GoString returns the string representation

func (CreateSubnetOutput) String added in v0.6.5 

func (s CreateSubnetOutput) String() string

String returns the string representation

type CreateTagsInput 

type CreateTagsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The IDs of one or more resources to tag. For example, ami-1a2b3c4d.
	Resources []*string `locationName:"ResourceId" type:"list" required:"true"`

	// One or more tags. The value parameter is required, but if you don't want
	// the tag to have a value, specify the parameter with no value, and we set
	// the value to an empty string.
	Tags []*Tag `locationName:"Tag" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateTags.

func (CreateTagsInput) GoString added in v0.6.5 

func (s CreateTagsInput) GoString() string

GoString returns the string representation

func (CreateTagsInput) String added in v0.6.5 

func (s CreateTagsInput) String() string

String returns the string representation

func (*CreateTagsInput) Validate added in v1.1.21 

func (s *CreateTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTagsOutput 

type CreateTagsOutput struct {
	// contains filtered or unexported fields
}

func (CreateTagsOutput) GoString added in v0.6.5 

func (s CreateTagsOutput) GoString() string

GoString returns the string representation

func (CreateTagsOutput) String added in v0.6.5 

func (s CreateTagsOutput) String() string

String returns the string representation

type CreateVolumeInput 

type CreateVolumeInput struct {

	// The Availability Zone in which to create the volume. Use DescribeAvailabilityZones
	// to list the Availability Zones that are currently available to you.
	AvailabilityZone *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Specifies whether the volume should be encrypted. Encrypted Amazon EBS volumes
	// may only be attached to instances that support Amazon EBS encryption. Volumes
	// that are created from encrypted snapshots are automatically encrypted. There
	// is no way to create an encrypted volume from an unencrypted snapshot or vice
	// versa. If your AMI uses encrypted volumes, you can only launch it on supported
	// instance types. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// Only valid for Provisioned IOPS SSD volumes. The number of I/O operations
	// per second (IOPS) to provision for the volume, with a maximum ratio of 30
	// IOPS/GiB.
	//
	// Constraint: Range is 100 to 20000 for Provisioned IOPS SSD volumes
	Iops *int64 `type:"integer"`

	// The full ARN of the AWS Key Management Service (AWS KMS) customer master
	// key (CMK) to use when creating the encrypted volume. This parameter is only
	// required if you want to use a non-default CMK; if this parameter is not specified,
	// the default CMK for EBS is used. The ARN contains the arn:aws:kms namespace,
	// followed by the region of the CMK, the AWS account ID of the CMK owner, the
	// key namespace, and then the CMK ID. For example, arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef.
	// If a KmsKeyId is specified, the Encrypted flag must also be set.
	KmsKeyId *string `type:"string"`

	// The size of the volume, in GiBs.
	//
	// Constraints: 1-16384 for gp2, 4-16384 for io1, 500-16384 for st1, 500-16384
	// for sc1, and 1-1024 for standard. If you specify a snapshot, the volume size
	// must be equal to or larger than the snapshot size.
	//
	// Default: If you're creating the volume from a snapshot and don't specify
	// a volume size, the default is the snapshot size.
	Size *int64 `type:"integer"`

	// The snapshot from which to create the volume.
	SnapshotId *string `type:"string"`

	// The volume type. This can be gp2 for General Purpose SSD, io1 for Provisioned
	// IOPS SSD, st1 for Throughput Optimized HDD, sc1 for Cold HDD, or standard
	// for Magnetic volumes.
	//
	// Default: standard
	VolumeType *string `type:"string" enum:"VolumeType"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVolume.

func (CreateVolumeInput) GoString added in v0.6.5 

func (s CreateVolumeInput) GoString() string

GoString returns the string representation

func (CreateVolumeInput) String added in v0.6.5 

func (s CreateVolumeInput) String() string

String returns the string representation

func (*CreateVolumeInput) Validate added in v1.1.21 

func (s *CreateVolumeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVolumePermission 

type CreateVolumePermission struct {

	// The specific group that is to be added or removed from a volume's list of
	// create volume permissions.
	Group *string `locationName:"group" type:"string" enum:"PermissionGroup"`

	// The specific AWS account ID that is to be added or removed from a volume's
	// list of create volume permissions.
	UserId *string `locationName:"userId" type:"string"`
	// contains filtered or unexported fields
}

Describes the user or group to be added or removed from the permissions for a volume.

func (CreateVolumePermission) GoString added in v0.6.5 

func (s CreateVolumePermission) GoString() string

GoString returns the string representation

func (CreateVolumePermission) String added in v0.6.5 

func (s CreateVolumePermission) String() string

String returns the string representation

type CreateVolumePermissionModifications 

type CreateVolumePermissionModifications struct {

	// Adds a specific AWS account ID or group to a volume's list of create volume
	// permissions.
	Add []*CreateVolumePermission `locationNameList:"item" type:"list"`

	// Removes a specific AWS account ID or group from a volume's list of create
	// volume permissions.
	Remove []*CreateVolumePermission `locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes modifications to the permissions for a volume.

func (CreateVolumePermissionModifications) GoString added in v0.6.5 

func (s CreateVolumePermissionModifications) GoString() string

GoString returns the string representation

func (CreateVolumePermissionModifications) String added in v0.6.5 

func (s CreateVolumePermissionModifications) String() string

String returns the string representation

type CreateVpcEndpointInput added in v0.9.5 

type CreateVpcEndpointInput struct {

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// A policy to attach to the endpoint that controls access to the service. The
	// policy must be in valid JSON format. If this parameter is not specified,
	// we attach a default policy that allows full access to the service.
	PolicyDocument *string `type:"string"`

	// One or more route table IDs.
	RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"`

	// The AWS service name, in the form com.amazonaws.region.service . To get a
	// list of available services, use the DescribeVpcEndpointServices request.
	ServiceName *string `type:"string" required:"true"`

	// The ID of the VPC in which the endpoint will be used.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpcEndpoint.

func (CreateVpcEndpointInput) GoString added in v0.9.5 

func (s CreateVpcEndpointInput) GoString() string

GoString returns the string representation

func (CreateVpcEndpointInput) String added in v0.9.5 

func (s CreateVpcEndpointInput) String() string

String returns the string representation

func (*CreateVpcEndpointInput) Validate added in v1.1.21 

func (s *CreateVpcEndpointInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVpcEndpointOutput added in v0.9.5 

type CreateVpcEndpointOutput struct {

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Information about the endpoint.
	VpcEndpoint *VpcEndpoint `locationName:"vpcEndpoint" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateVpcEndpoint.

func (CreateVpcEndpointOutput) GoString added in v0.9.5 

func (s CreateVpcEndpointOutput) GoString() string

GoString returns the string representation

func (CreateVpcEndpointOutput) String added in v0.9.5 

func (s CreateVpcEndpointOutput) String() string

String returns the string representation

type CreateVpcInput added in v0.9.5 

type CreateVpcInput struct {

	// The network range for the VPC, in CIDR notation. For example, 10.0.0.0/16.
	CidrBlock *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The tenancy options for instances launched into the VPC. For default, instances
	// are launched with shared tenancy by default. You can launch instances with
	// any tenancy into a shared tenancy VPC. For dedicated, instances are launched
	// as dedicated tenancy instances by default. You can only launch instances
	// with a tenancy of dedicated or host into a dedicated tenancy VPC.
	//
	//  Important: The host value cannot be used with this parameter. Use the default
	// or dedicated values only.
	//
	// Default: default
	InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpc.

func (CreateVpcInput) GoString added in v0.9.5 

func (s CreateVpcInput) GoString() string

GoString returns the string representation

func (CreateVpcInput) String added in v0.9.5 

func (s CreateVpcInput) String() string

String returns the string representation

func (*CreateVpcInput) Validate added in v1.1.21 

func (s *CreateVpcInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVpcOutput added in v0.9.5 

type CreateVpcOutput struct {

	// Information about the VPC.
	Vpc *Vpc `locationName:"vpc" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateVpc.

func (CreateVpcOutput) GoString added in v0.9.5 

func (s CreateVpcOutput) GoString() string

GoString returns the string representation

func (CreateVpcOutput) String added in v0.9.5 

func (s CreateVpcOutput) String() string

String returns the string representation

type CreateVpcPeeringConnectionInput added in v0.9.5 

type CreateVpcPeeringConnectionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The AWS account ID of the owner of the peer VPC.
	//
	// Default: Your AWS account ID
	PeerOwnerId *string `locationName:"peerOwnerId" type:"string"`

	// The ID of the VPC with which you are creating the VPC peering connection.
	PeerVpcId *string `locationName:"peerVpcId" type:"string"`

	// The ID of the requester VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpcPeeringConnection.

func (CreateVpcPeeringConnectionInput) GoString added in v0.9.5 

func (s CreateVpcPeeringConnectionInput) GoString() string

GoString returns the string representation

func (CreateVpcPeeringConnectionInput) String added in v0.9.5 

func (s CreateVpcPeeringConnectionInput) String() string

String returns the string representation

type CreateVpcPeeringConnectionOutput added in v0.9.5 

type CreateVpcPeeringConnectionOutput struct {

	// Information about the VPC peering connection.
	VpcPeeringConnection *VpcPeeringConnection `locationName:"vpcPeeringConnection" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateVpcPeeringConnection.

func (CreateVpcPeeringConnectionOutput) GoString added in v0.9.5 

func (s CreateVpcPeeringConnectionOutput) GoString() string

GoString returns the string representation

func (CreateVpcPeeringConnectionOutput) String added in v0.9.5 

func (s CreateVpcPeeringConnectionOutput) String() string

String returns the string representation

type CreateVpnConnectionInput added in v0.9.5 

type CreateVpnConnectionInput struct {

	// The ID of the customer gateway.
	CustomerGatewayId *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Indicates whether the VPN connection requires static routes. If you are creating
	// a VPN connection for a device that does not support BGP, you must specify
	// true.
	//
	// Default: false
	Options *VpnConnectionOptionsSpecification `locationName:"options" type:"structure"`

	// The type of VPN connection (ipsec.1).
	Type *string `type:"string" required:"true"`

	// The ID of the virtual private gateway.
	VpnGatewayId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpnConnection.

func (CreateVpnConnectionInput) GoString added in v0.9.5 

func (s CreateVpnConnectionInput) GoString() string

GoString returns the string representation

func (CreateVpnConnectionInput) String added in v0.9.5 

func (s CreateVpnConnectionInput) String() string

String returns the string representation

func (*CreateVpnConnectionInput) Validate added in v1.1.21 

func (s *CreateVpnConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVpnConnectionOutput added in v0.9.5 

type CreateVpnConnectionOutput struct {

	// Information about the VPN connection.
	VpnConnection *VpnConnection `locationName:"vpnConnection" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateVpnConnection.

func (CreateVpnConnectionOutput) GoString added in v0.9.5 

func (s CreateVpnConnectionOutput) GoString() string

GoString returns the string representation

func (CreateVpnConnectionOutput) String added in v0.9.5 

func (s CreateVpnConnectionOutput) String() string

String returns the string representation

type CreateVpnConnectionRouteInput added in v0.9.5 

type CreateVpnConnectionRouteInput struct {

	// The CIDR block associated with the local subnet of the customer network.
	DestinationCidrBlock *string `type:"string" required:"true"`

	// The ID of the VPN connection.
	VpnConnectionId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpnConnectionRoute.

func (CreateVpnConnectionRouteInput) GoString added in v0.9.5 

func (s CreateVpnConnectionRouteInput) GoString() string

GoString returns the string representation

func (CreateVpnConnectionRouteInput) String added in v0.9.5 

func (s CreateVpnConnectionRouteInput) String() string

String returns the string representation

func (*CreateVpnConnectionRouteInput) Validate added in v1.1.21 

func (s *CreateVpnConnectionRouteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVpnConnectionRouteOutput added in v0.9.5 

type CreateVpnConnectionRouteOutput struct {
	// contains filtered or unexported fields
}

func (CreateVpnConnectionRouteOutput) GoString added in v0.9.5 

func (s CreateVpnConnectionRouteOutput) GoString() string

GoString returns the string representation

func (CreateVpnConnectionRouteOutput) String added in v0.9.5 

func (s CreateVpnConnectionRouteOutput) String() string

String returns the string representation

type CreateVpnGatewayInput added in v0.9.5 

type CreateVpnGatewayInput struct {

	// The Availability Zone for the virtual private gateway.
	AvailabilityZone *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The type of VPN connection this virtual private gateway supports.
	Type *string `type:"string" required:"true" enum:"GatewayType"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateVpnGateway.

func (CreateVpnGatewayInput) GoString added in v0.9.5 

func (s CreateVpnGatewayInput) GoString() string

GoString returns the string representation

func (CreateVpnGatewayInput) String added in v0.9.5 

func (s CreateVpnGatewayInput) String() string

String returns the string representation

func (*CreateVpnGatewayInput) Validate added in v1.1.21 

func (s *CreateVpnGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVpnGatewayOutput added in v0.9.5 

type CreateVpnGatewayOutput struct {

	// Information about the virtual private gateway.
	VpnGateway *VpnGateway `locationName:"vpnGateway" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of CreateVpnGateway.

func (CreateVpnGatewayOutput) GoString added in v0.9.5 

func (s CreateVpnGatewayOutput) GoString() string

GoString returns the string representation

func (CreateVpnGatewayOutput) String added in v0.9.5 

func (s CreateVpnGatewayOutput) String() string

String returns the string representation

type CustomerGateway 

type CustomerGateway struct {

	// The customer gateway's Border Gateway Protocol (BGP) Autonomous System Number
	// (ASN).
	BgpAsn *string `locationName:"bgpAsn" type:"string"`

	// The ID of the customer gateway.
	CustomerGatewayId *string `locationName:"customerGatewayId" type:"string"`

	// The Internet-routable IP address of the customer gateway's outside interface.
	IpAddress *string `locationName:"ipAddress" type:"string"`

	// The current state of the customer gateway (pending | available | deleting
	// | deleted).
	State *string `locationName:"state" type:"string"`

	// Any tags assigned to the customer gateway.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The type of VPN connection the customer gateway supports (ipsec.1).
	Type *string `locationName:"type" type:"string"`
	// contains filtered or unexported fields
}

Describes a customer gateway.

func (CustomerGateway) GoString added in v0.6.5 

func (s CustomerGateway) GoString() string

GoString returns the string representation

func (CustomerGateway) String added in v0.6.5 

func (s CustomerGateway) String() string

String returns the string representation

type DeleteCustomerGatewayInput 

type DeleteCustomerGatewayInput struct {

	// The ID of the customer gateway.
	CustomerGatewayId *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteCustomerGateway.

func (DeleteCustomerGatewayInput) GoString added in v0.6.5 

func (s DeleteCustomerGatewayInput) GoString() string

GoString returns the string representation

func (DeleteCustomerGatewayInput) String added in v0.6.5 

func (s DeleteCustomerGatewayInput) String() string

String returns the string representation

func (*DeleteCustomerGatewayInput) Validate added in v1.1.21 

func (s *DeleteCustomerGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteCustomerGatewayOutput 

type DeleteCustomerGatewayOutput struct {
	// contains filtered or unexported fields
}

func (DeleteCustomerGatewayOutput) GoString added in v0.6.5 

func (s DeleteCustomerGatewayOutput) GoString() string

GoString returns the string representation

func (DeleteCustomerGatewayOutput) String added in v0.6.5 

func (s DeleteCustomerGatewayOutput) String() string

String returns the string representation

type DeleteDhcpOptionsInput added in v0.9.5 

type DeleteDhcpOptionsInput struct {

	// The ID of the DHCP options set.
	DhcpOptionsId *string `type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteDhcpOptions.

func (DeleteDhcpOptionsInput) GoString added in v0.9.5 

func (s DeleteDhcpOptionsInput) GoString() string

GoString returns the string representation

func (DeleteDhcpOptionsInput) String added in v0.9.5 

func (s DeleteDhcpOptionsInput) String() string

String returns the string representation

func (*DeleteDhcpOptionsInput) Validate added in v1.1.21 

func (s *DeleteDhcpOptionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDhcpOptionsOutput added in v0.9.5 

type DeleteDhcpOptionsOutput struct {
	// contains filtered or unexported fields
}

func (DeleteDhcpOptionsOutput) GoString added in v0.9.5 

func (s DeleteDhcpOptionsOutput) GoString() string

GoString returns the string representation

func (DeleteDhcpOptionsOutput) String added in v0.9.5 

func (s DeleteDhcpOptionsOutput) String() string

String returns the string representation

type DeleteFlowLogsInput added in v0.6.2 

type DeleteFlowLogsInput struct {

	// One or more flow log IDs.
	FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteFlowLogs.

func (DeleteFlowLogsInput) GoString added in v0.6.5 

func (s DeleteFlowLogsInput) GoString() string

GoString returns the string representation

func (DeleteFlowLogsInput) String added in v0.6.5 

func (s DeleteFlowLogsInput) String() string

String returns the string representation

func (*DeleteFlowLogsInput) Validate added in v1.1.21 

func (s *DeleteFlowLogsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteFlowLogsOutput added in v0.6.2 

type DeleteFlowLogsOutput struct {

	// Information about the flow logs that could not be deleted successfully.
	Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DeleteFlowLogs.

func (DeleteFlowLogsOutput) GoString added in v0.6.5 

func (s DeleteFlowLogsOutput) GoString() string

GoString returns the string representation

func (DeleteFlowLogsOutput) String added in v0.6.5 

func (s DeleteFlowLogsOutput) String() string

String returns the string representation

type DeleteInternetGatewayInput 

type DeleteInternetGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the Internet gateway.
	InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteInternetGateway.

func (DeleteInternetGatewayInput) GoString added in v0.6.5 

func (s DeleteInternetGatewayInput) GoString() string

GoString returns the string representation

func (DeleteInternetGatewayInput) String added in v0.6.5 

func (s DeleteInternetGatewayInput) String() string

String returns the string representation

func (*DeleteInternetGatewayInput) Validate added in v1.1.21 

func (s *DeleteInternetGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteInternetGatewayOutput 

type DeleteInternetGatewayOutput struct {
	// contains filtered or unexported fields
}

func (DeleteInternetGatewayOutput) GoString added in v0.6.5 

func (s DeleteInternetGatewayOutput) GoString() string

GoString returns the string representation

func (DeleteInternetGatewayOutput) String added in v0.6.5 

func (s DeleteInternetGatewayOutput) String() string

String returns the string representation

type DeleteKeyPairInput 

type DeleteKeyPairInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The name of the key pair.
	KeyName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteKeyPair.

func (DeleteKeyPairInput) GoString added in v0.6.5 

func (s DeleteKeyPairInput) GoString() string

GoString returns the string representation

func (DeleteKeyPairInput) String added in v0.6.5 

func (s DeleteKeyPairInput) String() string

String returns the string representation

func (*DeleteKeyPairInput) Validate added in v1.1.21 

func (s *DeleteKeyPairInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteKeyPairOutput 

type DeleteKeyPairOutput struct {
	// contains filtered or unexported fields
}

func (DeleteKeyPairOutput) GoString added in v0.6.5 

func (s DeleteKeyPairOutput) GoString() string

GoString returns the string representation

func (DeleteKeyPairOutput) String added in v0.6.5 

func (s DeleteKeyPairOutput) String() string

String returns the string representation

type DeleteNatGatewayInput added in v1.0.6 

type DeleteNatGatewayInput struct {

	// The ID of the NAT gateway.
	NatGatewayId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteNatGateway.

func (DeleteNatGatewayInput) GoString added in v1.0.6 

func (s DeleteNatGatewayInput) GoString() string

GoString returns the string representation

func (DeleteNatGatewayInput) String added in v1.0.6 

func (s DeleteNatGatewayInput) String() string

String returns the string representation

func (*DeleteNatGatewayInput) Validate added in v1.1.21 

func (s *DeleteNatGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteNatGatewayOutput added in v1.0.6 

type DeleteNatGatewayOutput struct {

	// The ID of the NAT gateway.
	NatGatewayId *string `locationName:"natGatewayId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DeleteNatGateway.

func (DeleteNatGatewayOutput) GoString added in v1.0.6 

func (s DeleteNatGatewayOutput) GoString() string

GoString returns the string representation

func (DeleteNatGatewayOutput) String added in v1.0.6 

func (s DeleteNatGatewayOutput) String() string

String returns the string representation

type DeleteNetworkAclEntryInput added in v0.9.5 

type DeleteNetworkAclEntryInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Indicates whether the rule is an egress rule.
	Egress *bool `locationName:"egress" type:"boolean" required:"true"`

	// The ID of the network ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"`

	// The rule number of the entry to delete.
	RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteNetworkAclEntry.

func (DeleteNetworkAclEntryInput) GoString added in v0.9.5 

func (s DeleteNetworkAclEntryInput) GoString() string

GoString returns the string representation

func (DeleteNetworkAclEntryInput) String added in v0.9.5 

func (s DeleteNetworkAclEntryInput) String() string

String returns the string representation

func (*DeleteNetworkAclEntryInput) Validate added in v1.1.21 

func (s *DeleteNetworkAclEntryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteNetworkAclEntryOutput added in v0.9.5 

type DeleteNetworkAclEntryOutput struct {
	// contains filtered or unexported fields
}

func (DeleteNetworkAclEntryOutput) GoString added in v0.9.5 

func (s DeleteNetworkAclEntryOutput) GoString() string

GoString returns the string representation

func (DeleteNetworkAclEntryOutput) String added in v0.9.5 

func (s DeleteNetworkAclEntryOutput) String() string

String returns the string representation

type DeleteNetworkAclInput added in v0.9.5 

type DeleteNetworkAclInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the network ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteNetworkAcl.

func (DeleteNetworkAclInput) GoString added in v0.9.5 

func (s DeleteNetworkAclInput) GoString() string

GoString returns the string representation

func (DeleteNetworkAclInput) String added in v0.9.5 

func (s DeleteNetworkAclInput) String() string

String returns the string representation

func (*DeleteNetworkAclInput) Validate added in v1.1.21 

func (s *DeleteNetworkAclInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteNetworkAclOutput added in v0.9.5 

type DeleteNetworkAclOutput struct {
	// contains filtered or unexported fields
}

func (DeleteNetworkAclOutput) GoString added in v0.9.5 

func (s DeleteNetworkAclOutput) GoString() string

GoString returns the string representation

func (DeleteNetworkAclOutput) String added in v0.9.5 

func (s DeleteNetworkAclOutput) String() string

String returns the string representation

type DeleteNetworkInterfaceInput 

type DeleteNetworkInterfaceInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteNetworkInterface.

func (DeleteNetworkInterfaceInput) GoString added in v0.6.5 

func (s DeleteNetworkInterfaceInput) GoString() string

GoString returns the string representation

func (DeleteNetworkInterfaceInput) String added in v0.6.5 

func (s DeleteNetworkInterfaceInput) String() string

String returns the string representation

func (*DeleteNetworkInterfaceInput) Validate added in v1.1.21 

func (s *DeleteNetworkInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteNetworkInterfaceOutput 

type DeleteNetworkInterfaceOutput struct {
	// contains filtered or unexported fields
}

func (DeleteNetworkInterfaceOutput) GoString added in v0.6.5 

func (s DeleteNetworkInterfaceOutput) GoString() string

GoString returns the string representation

func (DeleteNetworkInterfaceOutput) String added in v0.6.5 

func (s DeleteNetworkInterfaceOutput) String() string

String returns the string representation

type DeletePlacementGroupInput 

type DeletePlacementGroupInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The name of the placement group.
	GroupName *string `locationName:"groupName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeletePlacementGroup.

func (DeletePlacementGroupInput) GoString added in v0.6.5 

func (s DeletePlacementGroupInput) GoString() string

GoString returns the string representation

func (DeletePlacementGroupInput) String added in v0.6.5 

func (s DeletePlacementGroupInput) String() string

String returns the string representation

func (*DeletePlacementGroupInput) Validate added in v1.1.21 

func (s *DeletePlacementGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeletePlacementGroupOutput 

type DeletePlacementGroupOutput struct {
	// contains filtered or unexported fields
}

func (DeletePlacementGroupOutput) GoString added in v0.6.5 

func (s DeletePlacementGroupOutput) GoString() string

GoString returns the string representation

func (DeletePlacementGroupOutput) String added in v0.6.5 

func (s DeletePlacementGroupOutput) String() string

String returns the string representation

type DeleteRouteInput 

type DeleteRouteInput struct {

	// The CIDR range for the route. The value you specify must match the CIDR for
	// the route exactly.
	DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteRoute.

func (DeleteRouteInput) GoString added in v0.6.5 

func (s DeleteRouteInput) GoString() string

GoString returns the string representation

func (DeleteRouteInput) String added in v0.6.5 

func (s DeleteRouteInput) String() string

String returns the string representation

func (*DeleteRouteInput) Validate added in v1.1.21 

func (s *DeleteRouteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRouteOutput 

type DeleteRouteOutput struct {
	// contains filtered or unexported fields
}

func (DeleteRouteOutput) GoString added in v0.6.5 

func (s DeleteRouteOutput) GoString() string

GoString returns the string representation

func (DeleteRouteOutput) String added in v0.6.5 

func (s DeleteRouteOutput) String() string

String returns the string representation

type DeleteRouteTableInput 

type DeleteRouteTableInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteRouteTable.

func (DeleteRouteTableInput) GoString added in v0.6.5 

func (s DeleteRouteTableInput) GoString() string

GoString returns the string representation

func (DeleteRouteTableInput) String added in v0.6.5 

func (s DeleteRouteTableInput) String() string

String returns the string representation

func (*DeleteRouteTableInput) Validate added in v1.1.21 

func (s *DeleteRouteTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRouteTableOutput 

type DeleteRouteTableOutput struct {
	// contains filtered or unexported fields
}

func (DeleteRouteTableOutput) GoString added in v0.6.5 

func (s DeleteRouteTableOutput) GoString() string

GoString returns the string representation

func (DeleteRouteTableOutput) String added in v0.6.5 

func (s DeleteRouteTableOutput) String() string

String returns the string representation

type DeleteSecurityGroupInput 

type DeleteSecurityGroupInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the security group. Required for a nondefault VPC.
	GroupId *string `type:"string"`

	// [EC2-Classic, default VPC] The name of the security group. You can specify
	// either the security group name or the security group ID.
	GroupName *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteSecurityGroup.

func (DeleteSecurityGroupInput) GoString added in v0.6.5 

func (s DeleteSecurityGroupInput) GoString() string

GoString returns the string representation

func (DeleteSecurityGroupInput) String added in v0.6.5 

func (s DeleteSecurityGroupInput) String() string

String returns the string representation

type DeleteSecurityGroupOutput 

type DeleteSecurityGroupOutput struct {
	// contains filtered or unexported fields
}

func (DeleteSecurityGroupOutput) GoString added in v0.6.5 

func (s DeleteSecurityGroupOutput) GoString() string

GoString returns the string representation

func (DeleteSecurityGroupOutput) String added in v0.6.5 

func (s DeleteSecurityGroupOutput) String() string

String returns the string representation

type DeleteSnapshotInput 

type DeleteSnapshotInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the EBS snapshot.
	SnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteSnapshot.

func (DeleteSnapshotInput) GoString added in v0.6.5 

func (s DeleteSnapshotInput) GoString() string

GoString returns the string representation

func (DeleteSnapshotInput) String added in v0.6.5 

func (s DeleteSnapshotInput) String() string

String returns the string representation

func (*DeleteSnapshotInput) Validate added in v1.1.21 

func (s *DeleteSnapshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteSnapshotOutput 

type DeleteSnapshotOutput struct {
	// contains filtered or unexported fields
}

func (DeleteSnapshotOutput) GoString added in v0.6.5 

func (s DeleteSnapshotOutput) GoString() string

GoString returns the string representation

func (DeleteSnapshotOutput) String added in v0.6.5 

func (s DeleteSnapshotOutput) String() string

String returns the string representation

type DeleteSpotDatafeedSubscriptionInput 

type DeleteSpotDatafeedSubscriptionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteSpotDatafeedSubscription.

func (DeleteSpotDatafeedSubscriptionInput) GoString added in v0.6.5 

func (s DeleteSpotDatafeedSubscriptionInput) GoString() string

GoString returns the string representation

func (DeleteSpotDatafeedSubscriptionInput) String added in v0.6.5 

func (s DeleteSpotDatafeedSubscriptionInput) String() string

String returns the string representation

type DeleteSpotDatafeedSubscriptionOutput 

type DeleteSpotDatafeedSubscriptionOutput struct {
	// contains filtered or unexported fields
}

func (DeleteSpotDatafeedSubscriptionOutput) GoString added in v0.6.5 

func (s DeleteSpotDatafeedSubscriptionOutput) GoString() string

GoString returns the string representation

func (DeleteSpotDatafeedSubscriptionOutput) String added in v0.6.5 

func (s DeleteSpotDatafeedSubscriptionOutput) String() string

String returns the string representation

type DeleteSubnetInput 

type DeleteSubnetInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the subnet.
	SubnetId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteSubnet.

func (DeleteSubnetInput) GoString added in v0.6.5 

func (s DeleteSubnetInput) GoString() string

GoString returns the string representation

func (DeleteSubnetInput) String added in v0.6.5 

func (s DeleteSubnetInput) String() string

String returns the string representation

func (*DeleteSubnetInput) Validate added in v1.1.21 

func (s *DeleteSubnetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteSubnetOutput 

type DeleteSubnetOutput struct {
	// contains filtered or unexported fields
}

func (DeleteSubnetOutput) GoString added in v0.6.5 

func (s DeleteSubnetOutput) GoString() string

GoString returns the string representation

func (DeleteSubnetOutput) String added in v0.6.5 

func (s DeleteSubnetOutput) String() string

String returns the string representation

type DeleteTagsInput 

type DeleteTagsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the resource. For example, ami-1a2b3c4d. You can specify more than
	// one resource ID.
	Resources []*string `locationName:"resourceId" type:"list" required:"true"`

	// One or more tags to delete. If you omit the value parameter, we delete the
	// tag regardless of its value. If you specify this parameter with an empty
	// string as the value, we delete the key only if its value is an empty string.
	Tags []*Tag `locationName:"tag" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteTags.

func (DeleteTagsInput) GoString added in v0.6.5 

func (s DeleteTagsInput) GoString() string

GoString returns the string representation

func (DeleteTagsInput) String added in v0.6.5 

func (s DeleteTagsInput) String() string

String returns the string representation

func (*DeleteTagsInput) Validate added in v1.1.21 

func (s *DeleteTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTagsOutput 

type DeleteTagsOutput struct {
	// contains filtered or unexported fields
}

func (DeleteTagsOutput) GoString added in v0.6.5 

func (s DeleteTagsOutput) GoString() string

GoString returns the string representation

func (DeleteTagsOutput) String added in v0.6.5 

func (s DeleteTagsOutput) String() string

String returns the string representation

type DeleteVolumeInput 

type DeleteVolumeInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the volume.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVolume.

func (DeleteVolumeInput) GoString added in v0.6.5 

func (s DeleteVolumeInput) GoString() string

GoString returns the string representation

func (DeleteVolumeInput) String added in v0.6.5 

func (s DeleteVolumeInput) String() string

String returns the string representation

func (*DeleteVolumeInput) Validate added in v1.1.21 

func (s *DeleteVolumeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVolumeOutput 

type DeleteVolumeOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVolumeOutput) GoString added in v0.6.5 

func (s DeleteVolumeOutput) GoString() string

GoString returns the string representation

func (DeleteVolumeOutput) String added in v0.6.5 

func (s DeleteVolumeOutput) String() string

String returns the string representation

type DeleteVpcEndpointsInput added in v0.9.5 

type DeleteVpcEndpointsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more endpoint IDs.
	VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpcEndpoints.

func (DeleteVpcEndpointsInput) GoString added in v0.9.5 

func (s DeleteVpcEndpointsInput) GoString() string

GoString returns the string representation

func (DeleteVpcEndpointsInput) String added in v0.9.5 

func (s DeleteVpcEndpointsInput) String() string

String returns the string representation

func (*DeleteVpcEndpointsInput) Validate added in v1.1.21 

func (s *DeleteVpcEndpointsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpcEndpointsOutput added in v0.9.5 

type DeleteVpcEndpointsOutput struct {

	// Information about the endpoints that were not successfully deleted.
	Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DeleteVpcEndpoints.

func (DeleteVpcEndpointsOutput) GoString added in v0.9.5 

func (s DeleteVpcEndpointsOutput) GoString() string

GoString returns the string representation

func (DeleteVpcEndpointsOutput) String added in v0.9.5 

func (s DeleteVpcEndpointsOutput) String() string

String returns the string representation

type DeleteVpcInput added in v0.9.5 

type DeleteVpcInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpc.

func (DeleteVpcInput) GoString added in v0.9.5 

func (s DeleteVpcInput) GoString() string

GoString returns the string representation

func (DeleteVpcInput) String added in v0.9.5 

func (s DeleteVpcInput) String() string

String returns the string representation

func (*DeleteVpcInput) Validate added in v1.1.21 

func (s *DeleteVpcInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpcOutput added in v0.9.5 

type DeleteVpcOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVpcOutput) GoString added in v0.9.5 

func (s DeleteVpcOutput) GoString() string

GoString returns the string representation

func (DeleteVpcOutput) String added in v0.9.5 

func (s DeleteVpcOutput) String() string

String returns the string representation

type DeleteVpcPeeringConnectionInput added in v0.9.5 

type DeleteVpcPeeringConnectionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpcPeeringConnection.

func (DeleteVpcPeeringConnectionInput) GoString added in v0.9.5 

func (s DeleteVpcPeeringConnectionInput) GoString() string

GoString returns the string representation

func (DeleteVpcPeeringConnectionInput) String added in v0.9.5 

func (s DeleteVpcPeeringConnectionInput) String() string

String returns the string representation

func (*DeleteVpcPeeringConnectionInput) Validate added in v1.1.21 

func (s *DeleteVpcPeeringConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpcPeeringConnectionOutput added in v0.9.5 

type DeleteVpcPeeringConnectionOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of DeleteVpcPeeringConnection.

func (DeleteVpcPeeringConnectionOutput) GoString added in v0.9.5 

func (s DeleteVpcPeeringConnectionOutput) GoString() string

GoString returns the string representation

func (DeleteVpcPeeringConnectionOutput) String added in v0.9.5 

func (s DeleteVpcPeeringConnectionOutput) String() string

String returns the string representation

type DeleteVpnConnectionInput added in v0.9.5 

type DeleteVpnConnectionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPN connection.
	VpnConnectionId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpnConnection.

func (DeleteVpnConnectionInput) GoString added in v0.9.5 

func (s DeleteVpnConnectionInput) GoString() string

GoString returns the string representation

func (DeleteVpnConnectionInput) String added in v0.9.5 

func (s DeleteVpnConnectionInput) String() string

String returns the string representation

func (*DeleteVpnConnectionInput) Validate added in v1.1.21 

func (s *DeleteVpnConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpnConnectionOutput added in v0.9.5 

type DeleteVpnConnectionOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVpnConnectionOutput) GoString added in v0.9.5 

func (s DeleteVpnConnectionOutput) GoString() string

GoString returns the string representation

func (DeleteVpnConnectionOutput) String added in v0.9.5 

func (s DeleteVpnConnectionOutput) String() string

String returns the string representation

type DeleteVpnConnectionRouteInput added in v0.9.5 

type DeleteVpnConnectionRouteInput struct {

	// The CIDR block associated with the local subnet of the customer network.
	DestinationCidrBlock *string `type:"string" required:"true"`

	// The ID of the VPN connection.
	VpnConnectionId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpnConnectionRoute.

func (DeleteVpnConnectionRouteInput) GoString added in v0.9.5 

func (s DeleteVpnConnectionRouteInput) GoString() string

GoString returns the string representation

func (DeleteVpnConnectionRouteInput) String added in v0.9.5 

func (s DeleteVpnConnectionRouteInput) String() string

String returns the string representation

func (*DeleteVpnConnectionRouteInput) Validate added in v1.1.21 

func (s *DeleteVpnConnectionRouteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpnConnectionRouteOutput added in v0.9.5 

type DeleteVpnConnectionRouteOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVpnConnectionRouteOutput) GoString added in v0.9.5 

func (s DeleteVpnConnectionRouteOutput) GoString() string

GoString returns the string representation

func (DeleteVpnConnectionRouteOutput) String added in v0.9.5 

func (s DeleteVpnConnectionRouteOutput) String() string

String returns the string representation

type DeleteVpnGatewayInput added in v0.9.5 

type DeleteVpnGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the virtual private gateway.
	VpnGatewayId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteVpnGateway.

func (DeleteVpnGatewayInput) GoString added in v0.9.5 

func (s DeleteVpnGatewayInput) GoString() string

GoString returns the string representation

func (DeleteVpnGatewayInput) String added in v0.9.5 

func (s DeleteVpnGatewayInput) String() string

String returns the string representation

func (*DeleteVpnGatewayInput) Validate added in v1.1.21 

func (s *DeleteVpnGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVpnGatewayOutput added in v0.9.5 

type DeleteVpnGatewayOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVpnGatewayOutput) GoString added in v0.9.5 

func (s DeleteVpnGatewayOutput) GoString() string

GoString returns the string representation

func (DeleteVpnGatewayOutput) String added in v0.9.5 

func (s DeleteVpnGatewayOutput) String() string

String returns the string representation

type DeregisterImageInput 

type DeregisterImageInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the AMI.
	ImageId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeregisterImage.

func (DeregisterImageInput) GoString added in v0.6.5 

func (s DeregisterImageInput) GoString() string

GoString returns the string representation

func (DeregisterImageInput) String added in v0.6.5 

func (s DeregisterImageInput) String() string

String returns the string representation

func (*DeregisterImageInput) Validate added in v1.1.21 

func (s *DeregisterImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterImageOutput 

type DeregisterImageOutput struct {
	// contains filtered or unexported fields
}

func (DeregisterImageOutput) GoString added in v0.6.5 

func (s DeregisterImageOutput) GoString() string

GoString returns the string representation

func (DeregisterImageOutput) String added in v0.6.5 

func (s DeregisterImageOutput) String() string

String returns the string representation

type DescribeAccountAttributesInput 

type DescribeAccountAttributesInput struct {

	// One or more account attribute names.
	AttributeNames []*string `locationName:"attributeName" locationNameList:"attributeName" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeAccountAttributes.

func (DescribeAccountAttributesInput) GoString added in v0.6.5 

func (s DescribeAccountAttributesInput) GoString() string

GoString returns the string representation

func (DescribeAccountAttributesInput) String added in v0.6.5 

func (s DescribeAccountAttributesInput) String() string

String returns the string representation

type DescribeAccountAttributesOutput 

type DescribeAccountAttributesOutput struct {

	// Information about one or more account attributes.
	AccountAttributes []*AccountAttribute `locationName:"accountAttributeSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeAccountAttributes.

func (DescribeAccountAttributesOutput) GoString added in v0.6.5 

func (s DescribeAccountAttributesOutput) GoString() string

GoString returns the string representation

func (DescribeAccountAttributesOutput) String added in v0.6.5 

func (s DescribeAccountAttributesOutput) String() string

String returns the string representation

type DescribeAddressesInput 

type DescribeAddressesInput struct {

	// [EC2-VPC] One or more allocation IDs.
	//
	// Default: Describes all your Elastic IP addresses.
	AllocationIds []*string `locationName:"AllocationId" locationNameList:"AllocationId" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters. Filter names and values are case-sensitive.
	//
	//    allocation-id - [EC2-VPC] The allocation ID for the address.
	//
	//    association-id - [EC2-VPC] The association ID for the address.
	//
	//    domain - Indicates whether the address is for use in EC2-Classic (standard)
	// or in a VPC (vpc).
	//
	//    instance-id - The ID of the instance the address is associated with,
	// if any.
	//
	//    network-interface-id - [EC2-VPC] The ID of the network interface that
	// the address is associated with, if any.
	//
	//    network-interface-owner-id - The AWS account ID of the owner.
	//
	//    private-ip-address - [EC2-VPC] The private IP address associated with
	// the Elastic IP address.
	//
	//    public-ip - The Elastic IP address.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// [EC2-Classic] One or more Elastic IP addresses.
	//
	// Default: Describes all your Elastic IP addresses.
	PublicIps []*string `locationName:"PublicIp" locationNameList:"PublicIp" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeAddresses.

func (DescribeAddressesInput) GoString added in v0.6.5 

func (s DescribeAddressesInput) GoString() string

GoString returns the string representation

func (DescribeAddressesInput) String added in v0.6.5 

func (s DescribeAddressesInput) String() string

String returns the string representation

type DescribeAddressesOutput 

type DescribeAddressesOutput struct {

	// Information about one or more Elastic IP addresses.
	Addresses []*Address `locationName:"addressesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeAddresses.

func (DescribeAddressesOutput) GoString added in v0.6.5 

func (s DescribeAddressesOutput) GoString() string

GoString returns the string representation

func (DescribeAddressesOutput) String added in v0.6.5 

func (s DescribeAddressesOutput) String() string

String returns the string representation

type DescribeAvailabilityZonesInput 

type DescribeAvailabilityZonesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    message - Information about the Availability Zone.
	//
	//    region-name - The name of the region for the Availability Zone (for example,
	// us-east-1).
	//
	//    state - The state of the Availability Zone (available | information |
	// impaired | unavailable).
	//
	//    zone-name - The name of the Availability Zone (for example, us-east-1a).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The names of one or more Availability Zones.
	ZoneNames []*string `locationName:"ZoneName" locationNameList:"ZoneName" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeAvailabilityZones.

func (DescribeAvailabilityZonesInput) GoString added in v0.6.5 

func (s DescribeAvailabilityZonesInput) GoString() string

GoString returns the string representation

func (DescribeAvailabilityZonesInput) String added in v0.6.5 

func (s DescribeAvailabilityZonesInput) String() string

String returns the string representation

type DescribeAvailabilityZonesOutput 

type DescribeAvailabilityZonesOutput struct {

	// Information about one or more Availability Zones.
	AvailabilityZones []*AvailabilityZone `locationName:"availabilityZoneInfo" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeAvailabiltyZones.

func (DescribeAvailabilityZonesOutput) GoString added in v0.6.5 

func (s DescribeAvailabilityZonesOutput) GoString() string

GoString returns the string representation

func (DescribeAvailabilityZonesOutput) String added in v0.6.5 

func (s DescribeAvailabilityZonesOutput) String() string

String returns the string representation

type DescribeBundleTasksInput 

type DescribeBundleTasksInput struct {

	// One or more bundle task IDs.
	//
	// Default: Describes all your bundle tasks.
	BundleIds []*string `locationName:"BundleId" locationNameList:"BundleId" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    bundle-id - The ID of the bundle task.
	//
	//    error-code - If the task failed, the error code returned.
	//
	//    error-message - If the task failed, the error message returned.
	//
	//    instance-id - The ID of the instance.
	//
	//    progress - The level of task completion, as a percentage (for example,
	// 20%).
	//
	//    s3-bucket - The Amazon S3 bucket to store the AMI.
	//
	//    s3-prefix - The beginning of the AMI name.
	//
	//    start-time - The time the task started (for example, 2013-09-15T17:15:20.000Z).
	//
	//    state - The state of the task (pending | waiting-for-shutdown | bundling
	// | storing | cancelling | complete | failed).
	//
	//    update-time - The time of the most recent update for the task.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeBundleTasks.

func (DescribeBundleTasksInput) GoString added in v0.6.5 

func (s DescribeBundleTasksInput) GoString() string

GoString returns the string representation

func (DescribeBundleTasksInput) String added in v0.6.5 

func (s DescribeBundleTasksInput) String() string

String returns the string representation

type DescribeBundleTasksOutput 

type DescribeBundleTasksOutput struct {

	// Information about one or more bundle tasks.
	BundleTasks []*BundleTask `locationName:"bundleInstanceTasksSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeBundleTasks.

func (DescribeBundleTasksOutput) GoString added in v0.6.5 

func (s DescribeBundleTasksOutput) GoString() string

GoString returns the string representation

func (DescribeBundleTasksOutput) String added in v0.6.5 

func (s DescribeBundleTasksOutput) String() string

String returns the string representation

type DescribeClassicLinkInstancesInput 

type DescribeClassicLinkInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    group-id - The ID of a VPC security group that's associated with the
	// instance.
	//
	//    instance-id - The ID of the instance.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC that the instance is linked to.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more instance IDs. Must be instances linked to a VPC through ClassicLink.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results of the initial request can be seen by sending another
	// request with the returned NextToken value. This value can be between 5 and
	// 1000; if MaxResults is given a value larger than 1000, only 1000 results
	// are returned. You cannot specify this parameter and the instance IDs parameter
	// in the same request.
	//
	// Constraint: If the value is greater than 1000, we return only 1000 items.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeClassicLinkInstances.

func (DescribeClassicLinkInstancesInput) GoString added in v0.6.5 

func (s DescribeClassicLinkInstancesInput) GoString() string

GoString returns the string representation

func (DescribeClassicLinkInstancesInput) String added in v0.6.5 

func (s DescribeClassicLinkInstancesInput) String() string

String returns the string representation

type DescribeClassicLinkInstancesOutput 

type DescribeClassicLinkInstancesOutput struct {

	// Information about one or more linked EC2-Classic instances.
	Instances []*ClassicLinkInstance `locationName:"instancesSet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeClassicLinkInstances.

func (DescribeClassicLinkInstancesOutput) GoString added in v0.6.5 

func (s DescribeClassicLinkInstancesOutput) GoString() string

GoString returns the string representation

func (DescribeClassicLinkInstancesOutput) String added in v0.6.5 

func (s DescribeClassicLinkInstancesOutput) String() string

String returns the string representation

type DescribeConversionTasksInput 

type DescribeConversionTasksInput struct {

	// One or more conversion task IDs.
	ConversionTaskIds []*string `locationName:"conversionTaskId" locationNameList:"item" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeConversionTasks.

func (DescribeConversionTasksInput) GoString added in v0.6.5 

func (s DescribeConversionTasksInput) GoString() string

GoString returns the string representation

func (DescribeConversionTasksInput) String added in v0.6.5 

func (s DescribeConversionTasksInput) String() string

String returns the string representation

type DescribeConversionTasksOutput 

type DescribeConversionTasksOutput struct {

	// Information about the conversion tasks.
	ConversionTasks []*ConversionTask `locationName:"conversionTasks" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output for DescribeConversionTasks.

func (DescribeConversionTasksOutput) GoString added in v0.6.5 

func (s DescribeConversionTasksOutput) GoString() string

GoString returns the string representation

func (DescribeConversionTasksOutput) String added in v0.6.5 

func (s DescribeConversionTasksOutput) String() string

String returns the string representation

type DescribeCustomerGatewaysInput 

type DescribeCustomerGatewaysInput struct {

	// One or more customer gateway IDs.
	//
	// Default: Describes all your customer gateways.
	CustomerGatewayIds []*string `locationName:"CustomerGatewayId" locationNameList:"CustomerGatewayId" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    bgp-asn - The customer gateway's Border Gateway Protocol (BGP) Autonomous
	// System Number (ASN).
	//
	//    customer-gateway-id - The ID of the customer gateway.
	//
	//    ip-address - The IP address of the customer gateway's Internet-routable
	// external interface.
	//
	//    state - The state of the customer gateway (pending | available | deleting
	// | deleted).
	//
	//    type - The type of customer gateway. Currently, the only supported type
	// is ipsec.1.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeCustomerGateways.

func (DescribeCustomerGatewaysInput) GoString added in v0.6.5 

func (s DescribeCustomerGatewaysInput) GoString() string

GoString returns the string representation

func (DescribeCustomerGatewaysInput) String added in v0.6.5 

func (s DescribeCustomerGatewaysInput) String() string

String returns the string representation

type DescribeCustomerGatewaysOutput 

type DescribeCustomerGatewaysOutput struct {

	// Information about one or more customer gateways.
	CustomerGateways []*CustomerGateway `locationName:"customerGatewaySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeCustomerGateways.

func (DescribeCustomerGatewaysOutput) GoString added in v0.6.5 

func (s DescribeCustomerGatewaysOutput) GoString() string

GoString returns the string representation

func (DescribeCustomerGatewaysOutput) String added in v0.6.5 

func (s DescribeCustomerGatewaysOutput) String() string

String returns the string representation

type DescribeDhcpOptionsInput added in v0.9.5 

type DescribeDhcpOptionsInput struct {

	// The IDs of one or more DHCP options sets.
	//
	// Default: Describes all your DHCP options sets.
	DhcpOptionsIds []*string `locationName:"DhcpOptionsId" locationNameList:"DhcpOptionsId" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    dhcp-options-id - The ID of a set of DHCP options.
	//
	//    key - The key for one of the options (for example, domain-name).
	//
	//    value - The value for one of the options.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeDhcpOptions.

func (DescribeDhcpOptionsInput) GoString added in v0.9.5 

func (s DescribeDhcpOptionsInput) GoString() string

GoString returns the string representation

func (DescribeDhcpOptionsInput) String added in v0.9.5 

func (s DescribeDhcpOptionsInput) String() string

String returns the string representation

type DescribeDhcpOptionsOutput added in v0.9.5 

type DescribeDhcpOptionsOutput struct {

	// Information about one or more DHCP options sets.
	DhcpOptions []*DhcpOptions `locationName:"dhcpOptionsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeDhcpOptions.

func (DescribeDhcpOptionsOutput) GoString added in v0.9.5 

func (s DescribeDhcpOptionsOutput) GoString() string

GoString returns the string representation

func (DescribeDhcpOptionsOutput) String added in v0.9.5 

func (s DescribeDhcpOptionsOutput) String() string

String returns the string representation

type DescribeExportTasksInput 

type DescribeExportTasksInput struct {

	// One or more export task IDs.
	ExportTaskIds []*string `locationName:"exportTaskId" locationNameList:"ExportTaskId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeExportTasks.

func (DescribeExportTasksInput) GoString added in v0.6.5 

func (s DescribeExportTasksInput) GoString() string

GoString returns the string representation

func (DescribeExportTasksInput) String added in v0.6.5 

func (s DescribeExportTasksInput) String() string

String returns the string representation

type DescribeExportTasksOutput 

type DescribeExportTasksOutput struct {

	// Information about the export tasks.
	ExportTasks []*ExportTask `locationName:"exportTaskSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output for DescribeExportTasks.

func (DescribeExportTasksOutput) GoString added in v0.6.5 

func (s DescribeExportTasksOutput) GoString() string

GoString returns the string representation

func (DescribeExportTasksOutput) String added in v0.6.5 

func (s DescribeExportTasksOutput) String() string

String returns the string representation

type DescribeFlowLogsInput added in v0.6.2 

type DescribeFlowLogsInput struct {

	// One or more filters.
	//
	//    deliver-log-status - The status of the logs delivery (SUCCESS | FAILED).
	//
	//    flow-log-id - The ID of the flow log.
	//
	//    log-group-name - The name of the log group.
	//
	//    resource-id - The ID of the VPC, subnet, or network interface.
	//
	//    traffic-type - The type of traffic (ACCEPT | REJECT | ALL)
	Filter []*Filter `locationNameList:"Filter" type:"list"`

	// One or more flow log IDs.
	FlowLogIds []*string `locationName:"FlowLogId" locationNameList:"item" type:"list"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results can be seen by sending another request with the returned
	// NextToken value. This value can be between 5 and 1000; if MaxResults is given
	// a value larger than 1000, only 1000 results are returned. You cannot specify
	// this parameter and the flow log IDs parameter in the same request.
	MaxResults *int64 `type:"integer"`

	// The token to retrieve the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeFlowLogs.

func (DescribeFlowLogsInput) GoString added in v0.6.5 

func (s DescribeFlowLogsInput) GoString() string

GoString returns the string representation

func (DescribeFlowLogsInput) String added in v0.6.5 

func (s DescribeFlowLogsInput) String() string

String returns the string representation

type DescribeFlowLogsOutput added in v0.6.2 

type DescribeFlowLogsOutput struct {

	// Information about the flow logs.
	FlowLogs []*FlowLog `locationName:"flowLogSet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeFlowLogs.

func (DescribeFlowLogsOutput) GoString added in v0.6.5 

func (s DescribeFlowLogsOutput) GoString() string

GoString returns the string representation

func (DescribeFlowLogsOutput) String added in v0.6.5 

func (s DescribeFlowLogsOutput) String() string

String returns the string representation

type DescribeHostReservationOfferingsInput added in v1.4.3 

type DescribeHostReservationOfferingsInput struct {

	// One or more filters.
	//
	//    instance-family - The instance family of the offering (e.g., m4).
	//
	//    payment-option - The payment option (No Upfront | Partial Upfront | All
	// Upfront).
	Filter []*Filter `locationNameList:"Filter" type:"list"`

	// This is the maximum duration of the reservation you'd like to purchase, specified
	// in seconds. Reservations are available in one-year and three-year terms.
	// The number of seconds specified must be the number of seconds in a year (365x24x60x60)
	// times one of the supported durations (1 or 3). For example, specify 94608000
	// for three years.
	MaxDuration *int64 `type:"integer"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results can be seen by sending another request with the returned
	// nextToken value. This value can be between 5 and 500; if maxResults is given
	// a larger value than 500, you will receive an error.
	MaxResults *int64 `type:"integer"`

	// This is the minimum duration of the reservation you'd like to purchase, specified
	// in seconds. Reservations are available in one-year and three-year terms.
	// The number of seconds specified must be the number of seconds in a year (365x24x60x60)
	// times one of the supported durations (1 or 3). For example, specify 31536000
	// for one year.
	MinDuration *int64 `type:"integer"`

	// The token to use to retrieve the next page of results.
	NextToken *string `type:"string"`

	// The ID of the reservation offering.
	OfferingId *string `type:"string"`
	// contains filtered or unexported fields
}

func (DescribeHostReservationOfferingsInput) GoString added in v1.4.3 

func (s DescribeHostReservationOfferingsInput) GoString() string

GoString returns the string representation

func (DescribeHostReservationOfferingsInput) String added in v1.4.3 

func (s DescribeHostReservationOfferingsInput) String() string

String returns the string representation

type DescribeHostReservationOfferingsOutput added in v1.4.3 

type DescribeHostReservationOfferingsOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the offerings.
	OfferingSet []*HostOffering `locationName:"offeringSet" type:"list"`
	// contains filtered or unexported fields
}

func (DescribeHostReservationOfferingsOutput) GoString added in v1.4.3 

func (s DescribeHostReservationOfferingsOutput) GoString() string

GoString returns the string representation

func (DescribeHostReservationOfferingsOutput) String added in v1.4.3 

func (s DescribeHostReservationOfferingsOutput) String() string

String returns the string representation

type DescribeHostReservationsInput added in v1.4.3 

type DescribeHostReservationsInput struct {

	// One or more filters.
	//
	//    instance-family - The instance family (e.g., m4).
	//
	//    payment-option - The payment option (No Upfront | Partial Upfront | All
	// Upfront).
	//
	//    state - The state of the reservation (payment-pending | payment-failed
	// | active | retired).
	Filter []*Filter `locationNameList:"Filter" type:"list"`

	// One or more host reservation IDs.
	HostReservationIdSet []*string `locationNameList:"item" type:"list"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results can be seen by sending another request with the returned
	// nextToken value. This value can be between 5 and 500; if maxResults is given
	// a larger value than 500, you will receive an error.
	MaxResults *int64 `type:"integer"`

	// The token to use to retrieve the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

func (DescribeHostReservationsInput) GoString added in v1.4.3 

func (s DescribeHostReservationsInput) GoString() string

GoString returns the string representation

func (DescribeHostReservationsInput) String added in v1.4.3 

func (s DescribeHostReservationsInput) String() string

String returns the string representation

type DescribeHostReservationsOutput added in v1.4.3 

type DescribeHostReservationsOutput struct {

	// Details about the reservation's configuration.
	HostReservationSet []*HostReservation `locationName:"hostReservationSet" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeHostReservationsOutput) GoString added in v1.4.3 

func (s DescribeHostReservationsOutput) GoString() string

GoString returns the string representation

func (DescribeHostReservationsOutput) String added in v1.4.3 

func (s DescribeHostReservationsOutput) String() string

String returns the string representation

type DescribeHostsInput added in v1.0.1 

type DescribeHostsInput struct {

	// One or more filters.
	//
	//    instance-type - The instance type size that the Dedicated Host is configured
	// to support.
	//
	//    auto-placement - Whether auto-placement is enabled or disabled (on |
	// off).
	//
	//    host-reservation-id - The ID of the reservation assigned to this host.
	//
	//    client-token - The idempotency token you provided when you launched the
	// instance
	//
	//    state- The allocation state of the Dedicated Host (available | under-assessment
	// | permanent-failure | released | released-permanent-failure).
	//
	//    availability-zone - The Availability Zone of the host.
	Filter []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"`

	// The IDs of the Dedicated Hosts. The IDs are used for targeted instance launches.
	HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results can be seen by sending another request with the returned
	// nextToken value. This value can be between 5 and 500; if maxResults is given
	// a larger value than 500, you will receive an error. You cannot specify this
	// parameter and the host IDs parameter in the same request.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeHosts.

func (DescribeHostsInput) GoString added in v1.0.1 

func (s DescribeHostsInput) GoString() string

GoString returns the string representation

func (DescribeHostsInput) String added in v1.0.1 

func (s DescribeHostsInput) String() string

String returns the string representation

type DescribeHostsOutput added in v1.0.1 

type DescribeHostsOutput struct {

	// Information about the Dedicated Hosts.
	Hosts []*Host `locationName:"hostSet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeHosts.

func (DescribeHostsOutput) GoString added in v1.0.1 

func (s DescribeHostsOutput) GoString() string

GoString returns the string representation

func (DescribeHostsOutput) String added in v1.0.1 

func (s DescribeHostsOutput) String() string

String returns the string representation

type DescribeIdFormatInput added in v1.0.1 

type DescribeIdFormatInput struct {

	// The type of resource: instance | reservation | snapshot | volume
	Resource *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeIdFormat.

func (DescribeIdFormatInput) GoString added in v1.0.1 

func (s DescribeIdFormatInput) GoString() string

GoString returns the string representation

func (DescribeIdFormatInput) String added in v1.0.1 

func (s DescribeIdFormatInput) String() string

String returns the string representation

type DescribeIdFormatOutput added in v1.0.1 

type DescribeIdFormatOutput struct {

	// Information about the ID format for the resource.
	Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeIdFormat.

func (DescribeIdFormatOutput) GoString added in v1.0.1 

func (s DescribeIdFormatOutput) GoString() string

GoString returns the string representation

func (DescribeIdFormatOutput) String added in v1.0.1 

func (s DescribeIdFormatOutput) String() string

String returns the string representation

type DescribeIdentityIdFormatInput added in v1.2.0 

type DescribeIdentityIdFormatInput struct {

	// The ARN of the principal, which can be an IAM role, IAM user, or the root
	// user.
	PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"`

	// The type of resource: instance | reservation | snapshot | volume
	Resource *string `locationName:"resource" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeIdentityIdFormat.

func (DescribeIdentityIdFormatInput) GoString added in v1.2.0 

func (s DescribeIdentityIdFormatInput) GoString() string

GoString returns the string representation

func (DescribeIdentityIdFormatInput) String added in v1.2.0 

func (s DescribeIdentityIdFormatInput) String() string

String returns the string representation

func (*DescribeIdentityIdFormatInput) Validate added in v1.2.0 

func (s *DescribeIdentityIdFormatInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeIdentityIdFormatOutput added in v1.2.0 

type DescribeIdentityIdFormatOutput struct {

	// Information about the ID format for the resources.
	Statuses []*IdFormat `locationName:"statusSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeIdentityIdFormat.

func (DescribeIdentityIdFormatOutput) GoString added in v1.2.0 

func (s DescribeIdentityIdFormatOutput) GoString() string

GoString returns the string representation

func (DescribeIdentityIdFormatOutput) String added in v1.2.0 

func (s DescribeIdentityIdFormatOutput) String() string

String returns the string representation

type DescribeImageAttributeInput 

type DescribeImageAttributeInput struct {

	// The AMI attribute.
	//
	//  Note: Depending on your account privileges, the blockDeviceMapping attribute
	// may return a Client.AuthFailure error. If this happens, use DescribeImages
	// to get information about the block device mapping for the AMI.
	Attribute *string `type:"string" required:"true" enum:"ImageAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the AMI.
	ImageId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeImageAttribute.

func (DescribeImageAttributeInput) GoString added in v0.6.5 

func (s DescribeImageAttributeInput) GoString() string

GoString returns the string representation

func (DescribeImageAttributeInput) String added in v0.6.5 

func (s DescribeImageAttributeInput) String() string

String returns the string representation

func (*DescribeImageAttributeInput) Validate added in v1.1.21 

func (s *DescribeImageAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeImageAttributeOutput 

type DescribeImageAttributeOutput struct {

	// One or more block device mapping entries.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// A description for the AMI.
	Description *AttributeValue `locationName:"description" type:"structure"`

	// The ID of the AMI.
	ImageId *string `locationName:"imageId" type:"string"`

	// The kernel ID.
	KernelId *AttributeValue `locationName:"kernel" type:"structure"`

	// One or more launch permissions.
	LaunchPermissions []*LaunchPermission `locationName:"launchPermission" locationNameList:"item" type:"list"`

	// One or more product codes.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// The RAM disk ID.
	RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"`

	// Indicates whether enhanced networking with the Intel 82599 Virtual Function
	// interface is enabled.
	SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"`
	// contains filtered or unexported fields
}

Describes an image attribute.

func (DescribeImageAttributeOutput) GoString added in v0.6.5 

func (s DescribeImageAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeImageAttributeOutput) String added in v0.6.5 

func (s DescribeImageAttributeOutput) String() string

String returns the string representation

type DescribeImagesInput 

type DescribeImagesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Scopes the images by users with explicit launch permissions. Specify an AWS
	// account ID, self (the sender of the request), or all (public AMIs).
	ExecutableUsers []*string `locationName:"ExecutableBy" locationNameList:"ExecutableBy" type:"list"`

	// One or more filters.
	//
	//    architecture - The image architecture (i386 | x86_64).
	//
	//    block-device-mapping.delete-on-termination - A Boolean value that indicates
	// whether the Amazon EBS volume is deleted on instance termination.
	//
	//    block-device-mapping.device-name - The device name for the EBS volume
	// (for example, /dev/sdh).
	//
	//    block-device-mapping.snapshot-id - The ID of the snapshot used for the
	// EBS volume.
	//
	//    block-device-mapping.volume-size - The volume size of the EBS volume,
	// in GiB.
	//
	//    block-device-mapping.volume-type - The volume type of the EBS volume
	// (gp2 | io1 | st1 | sc1 | standard).
	//
	//    description - The description of the image (provided during image creation).
	//
	//    hypervisor - The hypervisor type (ovm | xen).
	//
	//    image-id - The ID of the image.
	//
	//    image-type - The image type (machine | kernel | ramdisk).
	//
	//    is-public - A Boolean that indicates whether the image is public.
	//
	//    kernel-id - The kernel ID.
	//
	//    manifest-location - The location of the image manifest.
	//
	//    name - The name of the AMI (provided during image creation).
	//
	//    owner-alias - String value from an Amazon-maintained list (amazon | aws-marketplace
	// | microsoft) of snapshot owners. Not to be confused with the user-configured
	// AWS account alias, which is set from the IAM console.
	//
	//    owner-id - The AWS account ID of the image owner.
	//
	//    platform - The platform. To only list Windows-based AMIs, use windows.
	//
	//    product-code - The product code.
	//
	//    product-code.type - The type of the product code (devpay | marketplace).
	//
	//    ramdisk-id - The RAM disk ID.
	//
	//    root-device-name - The name of the root device volume (for example, /dev/sda1).
	//
	//    root-device-type - The type of the root device volume (ebs | instance-store).
	//
	//    state - The state of the image (available | pending | failed).
	//
	//    state-reason-code - The reason code for the state change.
	//
	//    state-reason-message - The message for the state change.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    virtualization-type - The virtualization type (paravirtual | hvm).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more image IDs.
	//
	// Default: Describes all images available to you.
	ImageIds []*string `locationName:"ImageId" locationNameList:"ImageId" type:"list"`

	// Filters the images by the owner. Specify an AWS account ID, self (owner is
	// the sender of the request), or an AWS owner alias (valid values are amazon
	// | aws-marketplace | microsoft). Omitting this option returns all images for
	// which you have launch permissions, regardless of ownership.
	Owners []*string `locationName:"Owner" locationNameList:"Owner" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeImages.

func (DescribeImagesInput) GoString added in v0.6.5 

func (s DescribeImagesInput) GoString() string

GoString returns the string representation

func (DescribeImagesInput) String added in v0.6.5 

func (s DescribeImagesInput) String() string

String returns the string representation

type DescribeImagesOutput 

type DescribeImagesOutput struct {

	// Information about one or more images.
	Images []*Image `locationName:"imagesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeImages.

func (DescribeImagesOutput) GoString added in v0.6.5 

func (s DescribeImagesOutput) GoString() string

GoString returns the string representation

func (DescribeImagesOutput) String added in v0.6.5 

func (s DescribeImagesOutput) String() string

String returns the string representation

type DescribeImportImageTasksInput 

type DescribeImportImageTasksInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// Filter tasks using the task-state filter and one of the following values:
	// active, completed, deleting, deleted.
	Filters []*Filter `locationNameList:"Filter" type:"list"`

	// A list of import image task IDs.
	ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"`

	// The maximum number of results to return in a single call. To retrieve the
	// remaining results, make another call with the returned NextToken value.
	MaxResults *int64 `type:"integer"`

	// A token that indicates the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeImportImageTasks.

func (DescribeImportImageTasksInput) GoString added in v0.6.5 

func (s DescribeImportImageTasksInput) GoString() string

GoString returns the string representation

func (DescribeImportImageTasksInput) String added in v0.6.5 

func (s DescribeImportImageTasksInput) String() string

String returns the string representation

type DescribeImportImageTasksOutput 

type DescribeImportImageTasksOutput struct {

	// A list of zero or more import image tasks that are currently active or were
	// completed or canceled in the previous 7 days.
	ImportImageTasks []*ImportImageTask `locationName:"importImageTaskSet" locationNameList:"item" type:"list"`

	// The token to use to get the next page of results. This value is null when
	// there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output for DescribeImportImageTasks.

func (DescribeImportImageTasksOutput) GoString added in v0.6.5 

func (s DescribeImportImageTasksOutput) GoString() string

GoString returns the string representation

func (DescribeImportImageTasksOutput) String added in v0.6.5 

func (s DescribeImportImageTasksOutput) String() string

String returns the string representation

type DescribeImportSnapshotTasksInput 

type DescribeImportSnapshotTasksInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more filters.
	Filters []*Filter `locationNameList:"Filter" type:"list"`

	// A list of import snapshot task IDs.
	ImportTaskIds []*string `locationName:"ImportTaskId" locationNameList:"ImportTaskId" type:"list"`

	// The maximum number of results to return in a single call. To retrieve the
	// remaining results, make another call with the returned NextToken value.
	MaxResults *int64 `type:"integer"`

	// A token that indicates the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeImportSnapshotTasks.

func (DescribeImportSnapshotTasksInput) GoString added in v0.6.5 

func (s DescribeImportSnapshotTasksInput) GoString() string

GoString returns the string representation

func (DescribeImportSnapshotTasksInput) String added in v0.6.5 

func (s DescribeImportSnapshotTasksInput) String() string

String returns the string representation

type DescribeImportSnapshotTasksOutput 

type DescribeImportSnapshotTasksOutput struct {

	// A list of zero or more import snapshot tasks that are currently active or
	// were completed or canceled in the previous 7 days.
	ImportSnapshotTasks []*ImportSnapshotTask `locationName:"importSnapshotTaskSet" locationNameList:"item" type:"list"`

	// The token to use to get the next page of results. This value is null when
	// there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output for DescribeImportSnapshotTasks.

func (DescribeImportSnapshotTasksOutput) GoString added in v0.6.5 

func (s DescribeImportSnapshotTasksOutput) GoString() string

GoString returns the string representation

func (DescribeImportSnapshotTasksOutput) String added in v0.6.5 

func (s DescribeImportSnapshotTasksOutput) String() string

String returns the string representation

type DescribeInstanceAttributeInput 

type DescribeInstanceAttributeInput struct {

	// The instance attribute.
	//
	// Note: The enaSupport attribute is not supported at this time.
	Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeInstanceAttribute.

func (DescribeInstanceAttributeInput) GoString added in v0.6.5 

func (s DescribeInstanceAttributeInput) GoString() string

GoString returns the string representation

func (DescribeInstanceAttributeInput) String added in v0.6.5 

func (s DescribeInstanceAttributeInput) String() string

String returns the string representation

func (*DescribeInstanceAttributeInput) Validate added in v1.1.21 

func (s *DescribeInstanceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeInstanceAttributeOutput 

type DescribeInstanceAttributeOutput struct {

	// The block device mapping of the instance.
	BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// If the value is true, you can't terminate the instance through the Amazon
	// EC2 console, CLI, or API; otherwise, you can.
	DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"`

	// Indicates whether the instance is optimized for EBS I/O.
	EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"`

	// Indicates whether enhanced networking with ENA is enabled.
	EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"`

	// The security groups associated with the instance.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// Indicates whether an instance stops or terminates when you initiate shutdown
	// from the instance (using the operating system command for system shutdown).
	InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"`

	// The instance type.
	InstanceType *AttributeValue `locationName:"instanceType" type:"structure"`

	// The kernel ID.
	KernelId *AttributeValue `locationName:"kernel" type:"structure"`

	// A list of product codes.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// The RAM disk ID.
	RamdiskId *AttributeValue `locationName:"ramdisk" type:"structure"`

	// The name of the root device (for example, /dev/sda1 or /dev/xvda).
	RootDeviceName *AttributeValue `locationName:"rootDeviceName" type:"structure"`

	// Indicates whether source/destination checking is enabled. A value of true
	// means checking is enabled, and false means checking is disabled. This value
	// must be false for a NAT instance to perform NAT.
	SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"`

	// Indicates whether enhanced networking with the Intel 82599 Virtual Function
	// interface is enabled.
	SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"`

	// The user data.
	UserData *AttributeValue `locationName:"userData" type:"structure"`
	// contains filtered or unexported fields
}

Describes an instance attribute.

func (DescribeInstanceAttributeOutput) GoString added in v0.6.5 

func (s DescribeInstanceAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeInstanceAttributeOutput) String added in v0.6.5 

func (s DescribeInstanceAttributeOutput) String() string

String returns the string representation

type DescribeInstanceStatusInput 

type DescribeInstanceStatusInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone of the instance.
	//
	//    event.code - The code for the scheduled event (instance-reboot | system-reboot
	// | system-maintenance | instance-retirement | instance-stop).
	//
	//    event.description - A description of the event.
	//
	//    event.not-after - The latest end time for the scheduled event (for example,
	// 2014-09-15T17:15:20.000Z).
	//
	//    event.not-before - The earliest start time for the scheduled event (for
	// example, 2014-09-15T17:15:20.000Z).
	//
	//    instance-state-code - The code for the instance state, as a 16-bit unsigned
	// integer. The high byte is an opaque internal value and should be ignored.
	// The low byte is set based on the state represented. The valid values are
	// 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping),
	// and 80 (stopped).
	//
	//    instance-state-name - The state of the instance (pending | running |
	// shutting-down | terminated | stopping | stopped).
	//
	//    instance-status.reachability - Filters on instance status where the name
	// is reachability (passed | failed | initializing | insufficient-data).
	//
	//    instance-status.status - The status of the instance (ok | impaired |
	// initializing | insufficient-data | not-applicable).
	//
	//    system-status.reachability - Filters on system status where the name
	// is reachability (passed | failed | initializing | insufficient-data).
	//
	//    system-status.status - The system status of the instance (ok | impaired
	// | initializing | insufficient-data | not-applicable).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// When true, includes the health status for all instances. When false, includes
	// the health status for running instances only.
	//
	// Default: false
	IncludeAllInstances *bool `locationName:"includeAllInstances" type:"boolean"`

	// One or more instance IDs.
	//
	// Default: Describes all your instances.
	//
	// Constraints: Maximum 100 explicitly specified instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"`

	// The maximum number of results to return in a single call. To retrieve the
	// remaining results, make another call with the returned NextToken value. This
	// value can be between 5 and 1000. You cannot specify this parameter and the
	// instance IDs parameter in the same call.
	MaxResults *int64 `type:"integer"`

	// The token to retrieve the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeInstanceStatus.

func (DescribeInstanceStatusInput) GoString added in v0.6.5 

func (s DescribeInstanceStatusInput) GoString() string

GoString returns the string representation

func (DescribeInstanceStatusInput) String added in v0.6.5 

func (s DescribeInstanceStatusInput) String() string

String returns the string representation

type DescribeInstanceStatusOutput 

type DescribeInstanceStatusOutput struct {

	// One or more instance status descriptions.
	InstanceStatuses []*InstanceStatus `locationName:"instanceStatusSet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeInstanceStatus.

func (DescribeInstanceStatusOutput) GoString added in v0.6.5 

func (s DescribeInstanceStatusOutput) GoString() string

GoString returns the string representation

func (DescribeInstanceStatusOutput) String added in v0.6.5 

func (s DescribeInstanceStatusOutput) String() string

String returns the string representation

type DescribeInstancesInput 

type DescribeInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    affinity - The affinity setting for an instance running on a Dedicated
	// Host (default | host).
	//
	//    architecture - The instance architecture (i386 | x86_64).
	//
	//    availability-zone - The Availability Zone of the instance.
	//
	//    block-device-mapping.attach-time - The attach time for an EBS volume
	// mapped to the instance, for example, 2010-09-15T17:15:20.000Z.
	//
	//    block-device-mapping.delete-on-termination - A Boolean that indicates
	// whether the EBS volume is deleted on instance termination.
	//
	//    block-device-mapping.device-name - The device name for the EBS volume
	// (for example, /dev/sdh or xvdh).
	//
	//    block-device-mapping.status - The status for the EBS volume (attaching
	// | attached | detaching | detached).
	//
	//    block-device-mapping.volume-id - The volume ID of the EBS volume.
	//
	//    client-token - The idempotency token you provided when you launched the
	// instance.
	//
	//    dns-name - The public DNS name of the instance.
	//
	//    group-id - The ID of the security group for the instance. EC2-Classic
	// only.
	//
	//    group-name - The name of the security group for the instance. EC2-Classic
	// only.
	//
	//    host-id - The ID of the Dedicated Host on which the instance is running,
	// if applicable.
	//
	//    hypervisor - The hypervisor type of the instance (ovm | xen).
	//
	//    iam-instance-profile.arn - The instance profile associated with the instance.
	// Specified as an ARN.
	//
	//    image-id - The ID of the image used to launch the instance.
	//
	//    instance-id - The ID of the instance.
	//
	//    instance-lifecycle - Indicates whether this is a Spot Instance or a Scheduled
	// Instance (spot | scheduled).
	//
	//    instance-state-code - The state of the instance, as a 16-bit unsigned
	// integer. The high byte is an opaque internal value and should be ignored.
	// The low byte is set based on the state represented. The valid values are:
	// 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping),
	// and 80 (stopped).
	//
	//    instance-state-name - The state of the instance (pending | running |
	// shutting-down | terminated | stopping | stopped).
	//
	//    instance-type - The type of instance (for example, t2.micro).
	//
	//    instance.group-id - The ID of the security group for the instance.
	//
	//    instance.group-name - The name of the security group for the instance.
	//
	//    ip-address - The public IP address of the instance.
	//
	//    kernel-id - The kernel ID.
	//
	//    key-name - The name of the key pair used when the instance was launched.
	//
	//    launch-index - When launching multiple instances, this is the index for
	// the instance in the launch group (for example, 0, 1, 2, and so on).
	//
	//    launch-time - The time when the instance was launched.
	//
	//    monitoring-state - Indicates whether monitoring is enabled for the instance
	// (disabled | enabled).
	//
	//    owner-id - The AWS account ID of the instance owner.
	//
	//    placement-group-name - The name of the placement group for the instance.
	//
	//    platform - The platform. Use windows if you have Windows instances; otherwise,
	// leave blank.
	//
	//    private-dns-name - The private DNS name of the instance.
	//
	//    private-ip-address - The private IP address of the instance.
	//
	//    product-code - The product code associated with the AMI used to launch
	// the instance.
	//
	//    product-code.type - The type of product code (devpay | marketplace).
	//
	//    ramdisk-id - The RAM disk ID.
	//
	//    reason - The reason for the current state of the instance (for example,
	// shows "User Initiated [date]" when you stop or terminate the instance). Similar
	// to the state-reason-code filter.
	//
	//    requester-id - The ID of the entity that launched the instance on your
	// behalf (for example, AWS Management Console, Auto Scaling, and so on).
	//
	//    reservation-id - The ID of the instance's reservation. A reservation
	// ID is created any time you launch an instance. A reservation ID has a one-to-one
	// relationship with an instance launch request, but can be associated with
	// more than one instance if you launch multiple instances using the same launch
	// request. For example, if you launch one instance, you'll get one reservation
	// ID. If you launch ten instances using the same launch request, you'll also
	// get one reservation ID.
	//
	//    root-device-name - The name of the root device for the instance (for
	// example, /dev/sda1 or /dev/xvda).
	//
	//    root-device-type - The type of root device that the instance uses (ebs
	// | instance-store).
	//
	//    source-dest-check - Indicates whether the instance performs source/destination
	// checking. A value of true means that checking is enabled, and false means
	// checking is disabled. The value must be false for the instance to perform
	// network address translation (NAT) in your VPC.
	//
	//    spot-instance-request-id - The ID of the Spot instance request.
	//
	//    state-reason-code - The reason code for the state change.
	//
	//    state-reason-message - A message that describes the state change.
	//
	//    subnet-id - The ID of the subnet for the instance.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource,
	// where tag:key is the tag's key.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    tenancy - The tenancy of an instance (dedicated | default | host).
	//
	//    virtualization-type - The virtualization type of the instance (paravirtual
	// | hvm).
	//
	//    vpc-id - The ID of the VPC that the instance is running in.
	//
	//    network-interface.description - The description of the network interface.
	//
	//    network-interface.subnet-id - The ID of the subnet for the network interface.
	//
	//    network-interface.vpc-id - The ID of the VPC for the network interface.
	//
	//    network-interface.network-interface-id - The ID of the network interface.
	//
	//    network-interface.owner-id - The ID of the owner of the network interface.
	//
	//    network-interface.availability-zone - The Availability Zone for the network
	// interface.
	//
	//    network-interface.requester-id - The requester ID for the network interface.
	//
	//    network-interface.requester-managed - Indicates whether the network interface
	// is being managed by AWS.
	//
	//    network-interface.status - The status of the network interface (available)
	// | in-use).
	//
	//    network-interface.mac-address - The MAC address of the network interface.
	//
	//    network-interface.private-dns-name - The private DNS name of the network
	// interface.
	//
	//    network-interface.source-dest-check - Whether the network interface performs
	// source/destination checking. A value of true means checking is enabled, and
	// false means checking is disabled. The value must be false for the network
	// interface to perform network address translation (NAT) in your VPC.
	//
	//    network-interface.group-id - The ID of a security group associated with
	// the network interface.
	//
	//    network-interface.group-name - The name of a security group associated
	// with the network interface.
	//
	//    network-interface.attachment.attachment-id - The ID of the interface
	// attachment.
	//
	//    network-interface.attachment.instance-id - The ID of the instance to
	// which the network interface is attached.
	//
	//    network-interface.attachment.instance-owner-id - The owner ID of the
	// instance to which the network interface is attached.
	//
	//    network-interface.addresses.private-ip-address - The private IP address
	// associated with the network interface.
	//
	//    network-interface.attachment.device-index - The device index to which
	// the network interface is attached.
	//
	//    network-interface.attachment.status - The status of the attachment (attaching
	// | attached | detaching | detached).
	//
	//    network-interface.attachment.attach-time - The time that the network
	// interface was attached to an instance.
	//
	//    network-interface.attachment.delete-on-termination - Specifies whether
	// the attachment is deleted when an instance is terminated.
	//
	//    network-interface.addresses.primary - Specifies whether the IP address
	// of the network interface is the primary private IP address.
	//
	//    network-interface.addresses.association.public-ip - The ID of the association
	// of an Elastic IP address with a network interface.
	//
	//    network-interface.addresses.association.ip-owner-id - The owner ID of
	// the private IP address associated with the network interface.
	//
	//    association.public-ip - The address of the Elastic IP address bound to
	// the network interface.
	//
	//    association.ip-owner-id - The owner of the Elastic IP address associated
	// with the network interface.
	//
	//    association.allocation-id - The allocation ID returned when you allocated
	// the Elastic IP address for your network interface.
	//
	//    association.association-id - The association ID returned when the network
	// interface was associated with an IP address.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more instance IDs.
	//
	// Default: Describes all your instances.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list"`

	// The maximum number of results to return in a single call. To retrieve the
	// remaining results, make another call with the returned NextToken value. This
	// value can be between 5 and 1000. You cannot specify this parameter and the
	// instance IDs parameter or tag filters in the same call.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token to request the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeInstances.

func (DescribeInstancesInput) GoString added in v0.6.5 

func (s DescribeInstancesInput) GoString() string

GoString returns the string representation

func (DescribeInstancesInput) String added in v0.6.5 

func (s DescribeInstancesInput) String() string

String returns the string representation

type DescribeInstancesOutput 

type DescribeInstancesOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Zero or more reservations.
	Reservations []*Reservation `locationName:"reservationSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeInstances.

func (DescribeInstancesOutput) GoString added in v0.6.5 

func (s DescribeInstancesOutput) GoString() string

GoString returns the string representation

func (DescribeInstancesOutput) String added in v0.6.5 

func (s DescribeInstancesOutput) String() string

String returns the string representation

type DescribeInternetGatewaysInput 

type DescribeInternetGatewaysInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    attachment.state - The current state of the attachment between the gateway
	// and the VPC (available). Present only if a VPC is attached.
	//
	//    attachment.vpc-id - The ID of an attached VPC.
	//
	//    internet-gateway-id - The ID of the Internet gateway.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more Internet gateway IDs.
	//
	// Default: Describes all your Internet gateways.
	InternetGatewayIds []*string `locationName:"internetGatewayId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeInternetGateways.

func (DescribeInternetGatewaysInput) GoString added in v0.6.5 

func (s DescribeInternetGatewaysInput) GoString() string

GoString returns the string representation

func (DescribeInternetGatewaysInput) String added in v0.6.5 

func (s DescribeInternetGatewaysInput) String() string

String returns the string representation

type DescribeInternetGatewaysOutput 

type DescribeInternetGatewaysOutput struct {

	// Information about one or more Internet gateways.
	InternetGateways []*InternetGateway `locationName:"internetGatewaySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeInternetGateways.

func (DescribeInternetGatewaysOutput) GoString added in v0.6.5 

func (s DescribeInternetGatewaysOutput) GoString() string

GoString returns the string representation

func (DescribeInternetGatewaysOutput) String added in v0.6.5 

func (s DescribeInternetGatewaysOutput) String() string

String returns the string representation

type DescribeKeyPairsInput 

type DescribeKeyPairsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    fingerprint - The fingerprint of the key pair.
	//
	//    key-name - The name of the key pair.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more key pair names.
	//
	// Default: Describes all your key pairs.
	KeyNames []*string `locationName:"KeyName" locationNameList:"KeyName" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeKeyPairs.

func (DescribeKeyPairsInput) GoString added in v0.6.5 

func (s DescribeKeyPairsInput) GoString() string

GoString returns the string representation

func (DescribeKeyPairsInput) String added in v0.6.5 

func (s DescribeKeyPairsInput) String() string

String returns the string representation

type DescribeKeyPairsOutput 

type DescribeKeyPairsOutput struct {

	// Information about one or more key pairs.
	KeyPairs []*KeyPairInfo `locationName:"keySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeKeyPairs.

func (DescribeKeyPairsOutput) GoString added in v0.6.5 

func (s DescribeKeyPairsOutput) GoString() string

GoString returns the string representation

func (DescribeKeyPairsOutput) String added in v0.6.5 

func (s DescribeKeyPairsOutput) String() string

String returns the string representation

type DescribeMovingAddressesInput 

type DescribeMovingAddressesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    moving-status - The status of the Elastic IP address (MovingToVpc | RestoringToClassic).
	Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results of the initial request can be seen by sending another
	// request with the returned NextToken value. This value can be between 5 and
	// 1000; if MaxResults is given a value outside of this range, an error is returned.
	//
	// Default: If no value is provided, the default is 1000.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token to use to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// One or more Elastic IP addresses.
	PublicIps []*string `locationName:"publicIp" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeMovingAddresses.

func (DescribeMovingAddressesInput) GoString added in v0.6.5 

func (s DescribeMovingAddressesInput) GoString() string

GoString returns the string representation

func (DescribeMovingAddressesInput) String added in v0.6.5 

func (s DescribeMovingAddressesInput) String() string

String returns the string representation

type DescribeMovingAddressesOutput 

type DescribeMovingAddressesOutput struct {

	// The status for each Elastic IP address.
	MovingAddressStatuses []*MovingAddressStatus `locationName:"movingAddressStatusSet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeMovingAddresses.

func (DescribeMovingAddressesOutput) GoString added in v0.6.5 

func (s DescribeMovingAddressesOutput) GoString() string

GoString returns the string representation

func (DescribeMovingAddressesOutput) String added in v0.6.5 

func (s DescribeMovingAddressesOutput) String() string

String returns the string representation

type DescribeNatGatewaysInput added in v1.0.6 

type DescribeNatGatewaysInput struct {

	// One or more filters.
	//
	//    nat-gateway-id - The ID of the NAT gateway.
	//
	//    state - The state of the NAT gateway (pending | failed | available |
	// deleting | deleted).
	//
	//    subnet-id - The ID of the subnet in which the NAT gateway resides.
	//
	//    vpc-id - The ID of the VPC in which the NAT gateway resides.
	Filter []*Filter `locationNameList:"Filter" type:"list"`

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	//
	// Constraint: If the value specified is greater than 1000, we return only
	// 1000 items.
	MaxResults *int64 `type:"integer"`

	// One or more NAT gateway IDs.
	NatGatewayIds []*string `locationName:"NatGatewayId" locationNameList:"item" type:"list"`

	// The token to retrieve the next page of results.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeNatGateways.

func (DescribeNatGatewaysInput) GoString added in v1.0.6 

func (s DescribeNatGatewaysInput) GoString() string

GoString returns the string representation

func (DescribeNatGatewaysInput) String added in v1.0.6 

func (s DescribeNatGatewaysInput) String() string

String returns the string representation

type DescribeNatGatewaysOutput added in v1.0.6 

type DescribeNatGatewaysOutput struct {

	// Information about the NAT gateways.
	NatGateways []*NatGateway `locationName:"natGatewaySet" locationNameList:"item" type:"list"`

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeNatGateways.

func (DescribeNatGatewaysOutput) GoString added in v1.0.6 

func (s DescribeNatGatewaysOutput) GoString() string

GoString returns the string representation

func (DescribeNatGatewaysOutput) String added in v1.0.6 

func (s DescribeNatGatewaysOutput) String() string

String returns the string representation

type DescribeNetworkAclsInput added in v0.9.5 

type DescribeNetworkAclsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    association.association-id - The ID of an association ID for the ACL.
	//
	//    association.network-acl-id - The ID of the network ACL involved in the
	// association.
	//
	//    association.subnet-id - The ID of the subnet involved in the association.
	//
	//    default - Indicates whether the ACL is the default network ACL for the
	// VPC.
	//
	//    entry.cidr - The CIDR range specified in the entry.
	//
	//    entry.egress - Indicates whether the entry applies to egress traffic.
	//
	//    entry.icmp.code - The ICMP code specified in the entry, if any.
	//
	//    entry.icmp.type - The ICMP type specified in the entry, if any.
	//
	//    entry.port-range.from - The start of the port range specified in the
	// entry.
	//
	//    entry.port-range.to - The end of the port range specified in the entry.
	//
	//    entry.protocol - The protocol specified in the entry (tcp | udp | icmp
	// or a protocol number).
	//
	//    entry.rule-action - Allows or denies the matching traffic (allow | deny).
	//
	//    entry.rule-number - The number of an entry (in other words, rule) in
	// the ACL's set of entries.
	//
	//    network-acl-id - The ID of the network ACL.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC for the network ACL.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more network ACL IDs.
	//
	// Default: Describes all your network ACLs.
	NetworkAclIds []*string `locationName:"NetworkAclId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeNetworkAcls.

func (DescribeNetworkAclsInput) GoString added in v0.9.5 

func (s DescribeNetworkAclsInput) GoString() string

GoString returns the string representation

func (DescribeNetworkAclsInput) String added in v0.9.5 

func (s DescribeNetworkAclsInput) String() string

String returns the string representation

type DescribeNetworkAclsOutput added in v0.9.5 

type DescribeNetworkAclsOutput struct {

	// Information about one or more network ACLs.
	NetworkAcls []*NetworkAcl `locationName:"networkAclSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeNetworkAcls.

func (DescribeNetworkAclsOutput) GoString added in v0.9.5 

func (s DescribeNetworkAclsOutput) GoString() string

GoString returns the string representation

func (DescribeNetworkAclsOutput) String added in v0.9.5 

func (s DescribeNetworkAclsOutput) String() string

String returns the string representation

type DescribeNetworkInterfaceAttributeInput 

type DescribeNetworkInterfaceAttributeInput struct {

	// The attribute of the network interface.
	Attribute *string `locationName:"attribute" type:"string" enum:"NetworkInterfaceAttribute"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeNetworkInterfaceAttribute.

func (DescribeNetworkInterfaceAttributeInput) GoString added in v0.6.5 

func (s DescribeNetworkInterfaceAttributeInput) GoString() string

GoString returns the string representation

func (DescribeNetworkInterfaceAttributeInput) String added in v0.6.5 

func (s DescribeNetworkInterfaceAttributeInput) String() string

String returns the string representation

func (*DescribeNetworkInterfaceAttributeInput) Validate added in v1.1.21 

func (s *DescribeNetworkInterfaceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeNetworkInterfaceAttributeOutput 

type DescribeNetworkInterfaceAttributeOutput struct {

	// The attachment (if any) of the network interface.
	Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"`

	// The description of the network interface.
	Description *AttributeValue `locationName:"description" type:"structure"`

	// The security groups associated with the network interface.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// Indicates whether source/destination checking is enabled.
	SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of DescribeNetworkInterfaceAttribute.

func (DescribeNetworkInterfaceAttributeOutput) GoString added in v0.6.5 

func (s DescribeNetworkInterfaceAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeNetworkInterfaceAttributeOutput) String added in v0.6.5 

func (s DescribeNetworkInterfaceAttributeOutput) String() string

String returns the string representation

type DescribeNetworkInterfacesInput 

type DescribeNetworkInterfacesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    addresses.private-ip-address - The private IP addresses associated with
	// the network interface.
	//
	//    addresses.primary - Whether the private IP address is the primary IP
	// address associated with the network interface.
	//
	//    addresses.association.public-ip - The association ID returned when the
	// network interface was associated with the Elastic IP address.
	//
	//    addresses.association.owner-id - The owner ID of the addresses associated
	// with the network interface.
	//
	//    association.association-id - The association ID returned when the network
	// interface was associated with an IP address.
	//
	//    association.allocation-id - The allocation ID returned when you allocated
	// the Elastic IP address for your network interface.
	//
	//    association.ip-owner-id - The owner of the Elastic IP address associated
	// with the network interface.
	//
	//    association.public-ip - The address of the Elastic IP address bound to
	// the network interface.
	//
	//    association.public-dns-name - The public DNS name for the network interface.
	//
	//    attachment.attachment-id - The ID of the interface attachment.
	//
	//    attachment.attach.time - The time that the network interface was attached
	// to an instance.
	//
	//    attachment.delete-on-termination - Indicates whether the attachment is
	// deleted when an instance is terminated.
	//
	//    attachment.device-index - The device index to which the network interface
	// is attached.
	//
	//    attachment.instance-id - The ID of the instance to which the network
	// interface is attached.
	//
	//    attachment.instance-owner-id - The owner ID of the instance to which
	// the network interface is attached.
	//
	//    attachment.nat-gateway-id - The ID of the NAT gateway to which the network
	// interface is attached.
	//
	//    attachment.status - The status of the attachment (attaching | attached
	// | detaching | detached).
	//
	//    availability-zone - The Availability Zone of the network interface.
	//
	//    description - The description of the network interface.
	//
	//    group-id - The ID of a security group associated with the network interface.
	//
	//    group-name - The name of a security group associated with the network
	// interface.
	//
	//    mac-address - The MAC address of the network interface.
	//
	//    network-interface-id - The ID of the network interface.
	//
	//    owner-id - The AWS account ID of the network interface owner.
	//
	//    private-ip-address - The private IP address or addresses of the network
	// interface.
	//
	//    private-dns-name - The private DNS name of the network interface.
	//
	//    requester-id - The ID of the entity that launched the instance on your
	// behalf (for example, AWS Management Console, Auto Scaling, and so on).
	//
	//    requester-managed - Indicates whether the network interface is being
	// managed by an AWS service (for example, AWS Management Console, Auto Scaling,
	// and so on).
	//
	//    source-desk-check - Indicates whether the network interface performs
	// source/destination checking. A value of true means checking is enabled, and
	// false means checking is disabled. The value must be false for the network
	// interface to perform network address translation (NAT) in your VPC.
	//
	//    status - The status of the network interface. If the network interface
	// is not attached to an instance, the status is available; if a network interface
	// is attached to an instance the status is in-use.
	//
	//    subnet-id - The ID of the subnet for the network interface.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC for the network interface.
	Filters []*Filter `locationName:"filter" locationNameList:"Filter" type:"list"`

	// One or more network interface IDs.
	//
	// Default: Describes all your network interfaces.
	NetworkInterfaceIds []*string `locationName:"NetworkInterfaceId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeNetworkInterfaces.

func (DescribeNetworkInterfacesInput) GoString added in v0.6.5 

func (s DescribeNetworkInterfacesInput) GoString() string

GoString returns the string representation

func (DescribeNetworkInterfacesInput) String added in v0.6.5 

func (s DescribeNetworkInterfacesInput) String() string

String returns the string representation

type DescribeNetworkInterfacesOutput 

type DescribeNetworkInterfacesOutput struct {

	// Information about one or more network interfaces.
	NetworkInterfaces []*NetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeNetworkInterfaces.

func (DescribeNetworkInterfacesOutput) GoString added in v0.6.5 

func (s DescribeNetworkInterfacesOutput) GoString() string

GoString returns the string representation

func (DescribeNetworkInterfacesOutput) String added in v0.6.5 

func (s DescribeNetworkInterfacesOutput) String() string

String returns the string representation

type DescribePlacementGroupsInput 

type DescribePlacementGroupsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    group-name - The name of the placement group.
	//
	//    state - The state of the placement group (pending | available | deleting
	// | deleted).
	//
	//    strategy - The strategy of the placement group (cluster).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more placement group names.
	//
	// Default: Describes all your placement groups, or only those otherwise specified.
	GroupNames []*string `locationName:"groupName" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribePlacementGroups.

func (DescribePlacementGroupsInput) GoString added in v0.6.5 

func (s DescribePlacementGroupsInput) GoString() string

GoString returns the string representation

func (DescribePlacementGroupsInput) String added in v0.6.5 

func (s DescribePlacementGroupsInput) String() string

String returns the string representation

type DescribePlacementGroupsOutput 

type DescribePlacementGroupsOutput struct {

	// One or more placement groups.
	PlacementGroups []*PlacementGroup `locationName:"placementGroupSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribePlacementGroups.

func (DescribePlacementGroupsOutput) GoString added in v0.6.5 

func (s DescribePlacementGroupsOutput) GoString() string

GoString returns the string representation

func (DescribePlacementGroupsOutput) String added in v0.6.5 

func (s DescribePlacementGroupsOutput) String() string

String returns the string representation

type DescribePrefixListsInput 

type DescribePrefixListsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more filters.
	//
	//    prefix-list-id: The ID of a prefix list.
	//
	//    prefix-list-name: The name of a prefix list.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	//
	// Constraint: If the value specified is greater than 1000, we return only
	// 1000 items.
	MaxResults *int64 `type:"integer"`

	// The token for the next set of items to return. (You received this token from
	// a prior call.)
	NextToken *string `type:"string"`

	// One or more prefix list IDs.
	PrefixListIds []*string `locationName:"PrefixListId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribePrefixLists.

func (DescribePrefixListsInput) GoString added in v0.6.5 

func (s DescribePrefixListsInput) GoString() string

GoString returns the string representation

func (DescribePrefixListsInput) String added in v0.6.5 

func (s DescribePrefixListsInput) String() string

String returns the string representation

type DescribePrefixListsOutput 

type DescribePrefixListsOutput struct {

	// The token to use when requesting the next set of items. If there are no additional
	// items to return, the string is empty.
	NextToken *string `locationName:"nextToken" type:"string"`

	// All available prefix lists.
	PrefixLists []*PrefixList `locationName:"prefixListSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribePrefixLists.

func (DescribePrefixListsOutput) GoString added in v0.6.5 

func (s DescribePrefixListsOutput) GoString() string

GoString returns the string representation

func (DescribePrefixListsOutput) String added in v0.6.5 

func (s DescribePrefixListsOutput) String() string

String returns the string representation

type DescribeRegionsInput 

type DescribeRegionsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    endpoint - The endpoint of the region (for example, ec2.us-east-1.amazonaws.com).
	//
	//    region-name - The name of the region (for example, us-east-1).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The names of one or more regions.
	RegionNames []*string `locationName:"RegionName" locationNameList:"RegionName" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeRegions.

func (DescribeRegionsInput) GoString added in v0.6.5 

func (s DescribeRegionsInput) GoString() string

GoString returns the string representation

func (DescribeRegionsInput) String added in v0.6.5 

func (s DescribeRegionsInput) String() string

String returns the string representation

type DescribeRegionsOutput 

type DescribeRegionsOutput struct {

	// Information about one or more regions.
	Regions []*Region `locationName:"regionInfo" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeRegions.

func (DescribeRegionsOutput) GoString added in v0.6.5 

func (s DescribeRegionsOutput) GoString() string

GoString returns the string representation

func (DescribeRegionsOutput) String added in v0.6.5 

func (s DescribeRegionsOutput) String() string

String returns the string representation

type DescribeReservedInstancesInput 

type DescribeReservedInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone where the Reserved Instance
	// can be used.
	//
	//    duration - The duration of the Reserved Instance (one year or three years),
	// in seconds (31536000 | 94608000).
	//
	//    end - The time when the Reserved Instance expires (for example, 2015-08-07T11:54:42.000Z).
	//
	//    fixed-price - The purchase price of the Reserved Instance (for example,
	// 9800.0).
	//
	//    instance-type - The instance type that is covered by the reservation.
	//
	//    scope - The scope of the Reserved Instance (Region or Availability Zone).
	//
	//    product-description - The Reserved Instance product platform description.
	// Instances that include (Amazon VPC) in the product platform description will
	// only be displayed to EC2-Classic account holders and are for use with Amazon
	// VPC (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | SUSE Linux (Amazon
	// VPC) | Red Hat Enterprise Linux | Red Hat Enterprise Linux (Amazon VPC) |
	// Windows | Windows (Amazon VPC) | Windows with SQL Server Standard | Windows
	// with SQL Server Standard (Amazon VPC) | Windows with SQL Server Web | Windows
	// with SQL Server Web (Amazon VPC) | Windows with SQL Server Enterprise | Windows
	// with SQL Server Enterprise (Amazon VPC)).
	//
	//    reserved-instances-id - The ID of the Reserved Instance.
	//
	//    start - The time at which the Reserved Instance purchase request was
	// placed (for example, 2014-08-07T11:54:42.000Z).
	//
	//    state - The state of the Reserved Instance (payment-pending | active
	// | payment-failed | retired).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    usage-price - The usage price of the Reserved Instance, per hour (for
	// example, 0.84).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// Describes whether the Reserved Instance is Standard or Convertible.
	OfferingClass *string `type:"string" enum:"OfferingClassType"`

	// The Reserved Instance offering type. If you are using tools that predate
	// the 2011-11-01 API version, you only have access to the Medium Utilization
	// Reserved Instance offering type.
	OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"`

	// One or more Reserved Instance IDs.
	//
	// Default: Describes all your Reserved Instances, or only those otherwise
	// specified.
	ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeReservedInstances.

func (DescribeReservedInstancesInput) GoString added in v0.6.5 

func (s DescribeReservedInstancesInput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesInput) String added in v0.6.5 

func (s DescribeReservedInstancesInput) String() string

String returns the string representation

type DescribeReservedInstancesListingsInput 

type DescribeReservedInstancesListingsInput struct {

	// One or more filters.
	//
	//    reserved-instances-id - The ID of the Reserved Instances.
	//
	//    reserved-instances-listing-id - The ID of the Reserved Instances listing.
	//
	//    status - The status of the Reserved Instance listing (pending | active
	// | cancelled | closed).
	//
	//    status-message - The reason for the status.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more Reserved Instance IDs.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`

	// One or more Reserved Instance listing IDs.
	ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeReservedInstancesListings.

func (DescribeReservedInstancesListingsInput) GoString added in v0.6.5 

func (s DescribeReservedInstancesListingsInput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesListingsInput) String added in v0.6.5 

func (s DescribeReservedInstancesListingsInput) String() string

String returns the string representation

type DescribeReservedInstancesListingsOutput 

type DescribeReservedInstancesListingsOutput struct {

	// Information about the Reserved Instance listing.
	ReservedInstancesListings []*ReservedInstancesListing `locationName:"reservedInstancesListingsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeReservedInstancesListings.

func (DescribeReservedInstancesListingsOutput) GoString added in v0.6.5 

func (s DescribeReservedInstancesListingsOutput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesListingsOutput) String added in v0.6.5 

func (s DescribeReservedInstancesListingsOutput) String() string

String returns the string representation

type DescribeReservedInstancesModificationsInput 

type DescribeReservedInstancesModificationsInput struct {

	// One or more filters.
	//
	//    client-token - The idempotency token for the modification request.
	//
	//    create-date - The time when the modification request was created.
	//
	//    effective-date - The time when the modification becomes effective.
	//
	//    modification-result.reserved-instances-id - The ID for the Reserved Instances
	// created as part of the modification request. This ID is only available when
	// the status of the modification is fulfilled.
	//
	//    modification-result.target-configuration.availability-zone - The Availability
	// Zone for the new Reserved Instances.
	//
	//    modification-result.target-configuration.instance-count  - The number
	// of new Reserved Instances.
	//
	//    modification-result.target-configuration.instance-type - The instance
	// type of the new Reserved Instances.
	//
	//    modification-result.target-configuration.platform - The network platform
	// of the new Reserved Instances (EC2-Classic | EC2-VPC).
	//
	//    reserved-instances-id - The ID of the Reserved Instances modified.
	//
	//    reserved-instances-modification-id - The ID of the modification request.
	//
	//    status - The status of the Reserved Instances modification request (processing
	// | fulfilled | failed).
	//
	//    status-message - The reason for the status.
	//
	//    update-date - The time when the modification request was last updated.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The token to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// IDs for the submitted modification request.
	ReservedInstancesModificationIds []*string `locationName:"ReservedInstancesModificationId" locationNameList:"ReservedInstancesModificationId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeReservedInstancesModifications.

func (DescribeReservedInstancesModificationsInput) GoString added in v0.6.5 

func (s DescribeReservedInstancesModificationsInput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesModificationsInput) String added in v0.6.5 

func (s DescribeReservedInstancesModificationsInput) String() string

String returns the string representation

type DescribeReservedInstancesModificationsOutput 

type DescribeReservedInstancesModificationsOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The Reserved Instance modification information.
	ReservedInstancesModifications []*ReservedInstancesModification `locationName:"reservedInstancesModificationsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeReservedInstancesModifications.

func (DescribeReservedInstancesModificationsOutput) GoString added in v0.6.5 

func (s DescribeReservedInstancesModificationsOutput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesModificationsOutput) String added in v0.6.5 

func (s DescribeReservedInstancesModificationsOutput) String() string

String returns the string representation

type DescribeReservedInstancesOfferingsInput 

type DescribeReservedInstancesOfferingsInput struct {

	// The Availability Zone in which the Reserved Instance can be used.
	AvailabilityZone *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone where the Reserved Instance
	// can be used.
	//
	//    duration - The duration of the Reserved Instance (for example, one year
	// or three years), in seconds (31536000 | 94608000).
	//
	//    fixed-price - The purchase price of the Reserved Instance (for example,
	// 9800.0).
	//
	//    instance-type - The instance type that is covered by the reservation.
	//
	//    marketplace - Set to true to show only Reserved Instance Marketplace
	// offerings. When this filter is not used, which is the default behavior, all
	// offerings from both AWS and the Reserved Instance Marketplace are listed.
	//
	//    product-description - The Reserved Instance product platform description.
	// Instances that include (Amazon VPC) in the product platform description will
	// only be displayed to EC2-Classic account holders and are for use with Amazon
	// VPC. (Linux/UNIX | Linux/UNIX (Amazon VPC) | SUSE Linux | SUSE Linux (Amazon
	// VPC) | Red Hat Enterprise Linux | Red Hat Enterprise Linux (Amazon VPC) |
	// Windows | Windows (Amazon VPC) | Windows with SQL Server Standard | Windows
	// with SQL Server Standard (Amazon VPC) | Windows with SQL Server Web |  Windows
	// with SQL Server Web (Amazon VPC) | Windows with SQL Server Enterprise | Windows
	// with SQL Server Enterprise (Amazon VPC))
	//
	//    reserved-instances-offering-id - The Reserved Instances offering ID.
	//
	//    scope - The scope of the Reserved Instance (Availability Zone or Region).
	//
	//    usage-price - The usage price of the Reserved Instance, per hour (for
	// example, 0.84).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// Include Reserved Instance Marketplace offerings in the response.
	IncludeMarketplace *bool `type:"boolean"`

	// The tenancy of the instances covered by the reservation. A Reserved Instance
	// with a tenancy of dedicated is applied to instances that run in a VPC on
	// single-tenant hardware (i.e., Dedicated Instances).
	//
	// Default: default
	InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"`

	// The instance type that the reservation will cover (for example, m1.small).
	// For more information, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	InstanceType *string `type:"string" enum:"InstanceType"`

	// The maximum duration (in seconds) to filter when searching for offerings.
	//
	// Default: 94608000 (3 years)
	MaxDuration *int64 `type:"long"`

	// The maximum number of instances to filter when searching for offerings.
	//
	// Default: 20
	MaxInstanceCount *int64 `type:"integer"`

	// The maximum number of results to return for the request in a single page.
	// The remaining results of the initial request can be seen by sending another
	// request with the returned NextToken value. The maximum is 100.
	//
	// Default: 100
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The minimum duration (in seconds) to filter when searching for offerings.
	//
	// Default: 2592000 (1 month)
	MinDuration *int64 `type:"long"`

	// The token to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The offering class of the Reserved Instance. Can be standard or convertible.
	OfferingClass *string `type:"string" enum:"OfferingClassType"`

	// The Reserved Instance offering type. If you are using tools that predate
	// the 2011-11-01 API version, you only have access to the Medium Utilization
	// Reserved Instance offering type.
	OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"`

	// The Reserved Instance product platform description. Instances that include
	// (Amazon VPC) in the description are for use with Amazon VPC.
	ProductDescription *string `type:"string" enum:"RIProductDescription"`

	// One or more Reserved Instances offering IDs.
	ReservedInstancesOfferingIds []*string `locationName:"ReservedInstancesOfferingId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeReservedInstancesOfferings.

func (DescribeReservedInstancesOfferingsInput) GoString added in v0.6.5 

func (s DescribeReservedInstancesOfferingsInput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesOfferingsInput) String added in v0.6.5 

func (s DescribeReservedInstancesOfferingsInput) String() string

String returns the string representation

type DescribeReservedInstancesOfferingsOutput 

type DescribeReservedInstancesOfferingsOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// A list of Reserved Instances offerings.
	ReservedInstancesOfferings []*ReservedInstancesOffering `locationName:"reservedInstancesOfferingsSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeReservedInstancesOfferings.

func (DescribeReservedInstancesOfferingsOutput) GoString added in v0.6.5 

func (s DescribeReservedInstancesOfferingsOutput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesOfferingsOutput) String added in v0.6.5 

func (s DescribeReservedInstancesOfferingsOutput) String() string

String returns the string representation

type DescribeReservedInstancesOutput 

type DescribeReservedInstancesOutput struct {

	// A list of Reserved Instances.
	ReservedInstances []*ReservedInstances `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output for DescribeReservedInstances.

func (DescribeReservedInstancesOutput) GoString added in v0.6.5 

func (s DescribeReservedInstancesOutput) GoString() string

GoString returns the string representation

func (DescribeReservedInstancesOutput) String added in v0.6.5 

func (s DescribeReservedInstancesOutput) String() string

String returns the string representation

type DescribeRouteTablesInput 

type DescribeRouteTablesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    association.route-table-association-id - The ID of an association ID
	// for the route table.
	//
	//    association.route-table-id - The ID of the route table involved in the
	// association.
	//
	//    association.subnet-id - The ID of the subnet involved in the association.
	//
	//    association.main - Indicates whether the route table is the main route
	// table for the VPC (true | false).
	//
	//    route-table-id - The ID of the route table.
	//
	//    route.destination-cidr-block - The CIDR range specified in a route in
	// the table.
	//
	//    route.destination-prefix-list-id - The ID (prefix) of the AWS service
	// specified in a route in the table.
	//
	//    route.gateway-id - The ID of a gateway specified in a route in the table.
	//
	//    route.instance-id - The ID of an instance specified in a route in the
	// table.
	//
	//    route.nat-gateway-id - The ID of a NAT gateway.
	//
	//    route.origin - Describes how the route was created. CreateRouteTable
	// indicates that the route was automatically created when the route table was
	// created; CreateRoute indicates that the route was manually added to the route
	// table; EnableVgwRoutePropagation indicates that the route was propagated
	// by route propagation.
	//
	//    route.state - The state of a route in the route table (active | blackhole).
	// The blackhole state indicates that the route's target isn't available (for
	// example, the specified gateway isn't attached to the VPC, the specified NAT
	// instance has been terminated, and so on).
	//
	//    route.vpc-peering-connection-id - The ID of a VPC peering connection
	// specified in a route in the table.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC for the route table.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more route table IDs.
	//
	// Default: Describes all your route tables.
	RouteTableIds []*string `locationName:"RouteTableId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeRouteTables.

func (DescribeRouteTablesInput) GoString added in v0.6.5 

func (s DescribeRouteTablesInput) GoString() string

GoString returns the string representation

func (DescribeRouteTablesInput) String added in v0.6.5 

func (s DescribeRouteTablesInput) String() string

String returns the string representation

type DescribeRouteTablesOutput 

type DescribeRouteTablesOutput struct {

	// Information about one or more route tables.
	RouteTables []*RouteTable `locationName:"routeTableSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeRouteTables.

func (DescribeRouteTablesOutput) GoString added in v0.6.5 

func (s DescribeRouteTablesOutput) GoString() string

GoString returns the string representation

func (DescribeRouteTablesOutput) String added in v0.6.5 

func (s DescribeRouteTablesOutput) String() string

String returns the string representation

type DescribeScheduledInstanceAvailabilityInput added in v1.0.9 

type DescribeScheduledInstanceAvailabilityInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone (for example, us-west-2a).
	//
	//    instance-type - The instance type (for example, c4.large).
	//
	//    network-platform - The network platform (EC2-Classic or EC2-VPC).
	//
	//    platform - The platform (Linux/UNIX or Windows).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The time period for the first schedule to start.
	FirstSlotStartTimeRange *SlotDateTimeRangeRequest `type:"structure" required:"true"`

	// The maximum number of results to return in a single call. This value can
	// be between 5 and 300. The default value is 300. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `type:"integer"`

	// The maximum available duration, in hours. This value must be greater than
	// MinSlotDurationInHours and less than 1,720.
	MaxSlotDurationInHours *int64 `type:"integer"`

	// The minimum available duration, in hours. The minimum required duration is
	// 1,200 hours per year. For example, the minimum daily schedule is 4 hours,
	// the minimum weekly schedule is 24 hours, and the minimum monthly schedule
	// is 100 hours.
	MinSlotDurationInHours *int64 `type:"integer"`

	// The token for the next set of results.
	NextToken *string `type:"string"`

	// The schedule recurrence.
	Recurrence *ScheduledInstanceRecurrenceRequest `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeScheduledInstanceAvailability.

func (DescribeScheduledInstanceAvailabilityInput) GoString added in v1.0.9 

func (s DescribeScheduledInstanceAvailabilityInput) GoString() string

GoString returns the string representation

func (DescribeScheduledInstanceAvailabilityInput) String added in v1.0.9 

func (s DescribeScheduledInstanceAvailabilityInput) String() string

String returns the string representation

func (*DescribeScheduledInstanceAvailabilityInput) Validate added in v1.1.21 

func (s *DescribeScheduledInstanceAvailabilityInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeScheduledInstanceAvailabilityOutput added in v1.0.9 

type DescribeScheduledInstanceAvailabilityOutput struct {

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the available Scheduled Instances.
	ScheduledInstanceAvailabilitySet []*ScheduledInstanceAvailability `locationName:"scheduledInstanceAvailabilitySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeScheduledInstanceAvailability.

func (DescribeScheduledInstanceAvailabilityOutput) GoString added in v1.0.9 

func (s DescribeScheduledInstanceAvailabilityOutput) GoString() string

GoString returns the string representation

func (DescribeScheduledInstanceAvailabilityOutput) String added in v1.0.9 

func (s DescribeScheduledInstanceAvailabilityOutput) String() string

String returns the string representation

type DescribeScheduledInstancesInput added in v1.0.9 

type DescribeScheduledInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone (for example, us-west-2a).
	//
	//    instance-type - The instance type (for example, c4.large).
	//
	//    network-platform - The network platform (EC2-Classic or EC2-VPC).
	//
	//    platform - The platform (Linux/UNIX or Windows).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of results to return in a single call. This value can
	// be between 5 and 300. The default value is 100. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `type:"integer"`

	// The token for the next set of results.
	NextToken *string `type:"string"`

	// One or more Scheduled Instance IDs.
	ScheduledInstanceIds []*string `locationName:"ScheduledInstanceId" locationNameList:"ScheduledInstanceId" type:"list"`

	// The time period for the first schedule to start.
	SlotStartTimeRange *SlotStartTimeRangeRequest `type:"structure"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeScheduledInstances.

func (DescribeScheduledInstancesInput) GoString added in v1.0.9 

func (s DescribeScheduledInstancesInput) GoString() string

GoString returns the string representation

func (DescribeScheduledInstancesInput) String added in v1.0.9 

func (s DescribeScheduledInstancesInput) String() string

String returns the string representation

type DescribeScheduledInstancesOutput added in v1.0.9 

type DescribeScheduledInstancesOutput struct {

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the Scheduled Instances.
	ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeScheduledInstances.

func (DescribeScheduledInstancesOutput) GoString added in v1.0.9 

func (s DescribeScheduledInstancesOutput) GoString() string

GoString returns the string representation

func (DescribeScheduledInstancesOutput) String added in v1.0.9 

func (s DescribeScheduledInstancesOutput) String() string

String returns the string representation

type DescribeSecurityGroupReferencesInput added in v1.1.26 

type DescribeSecurityGroupReferencesInput struct {

	// Checks whether you have the required permissions for the operation, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more security group IDs in your account.
	GroupId []*string `locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeSecurityGroupReferencesInput) GoString added in v1.1.26 

func (s DescribeSecurityGroupReferencesInput) GoString() string

GoString returns the string representation

func (DescribeSecurityGroupReferencesInput) String added in v1.1.26 

func (s DescribeSecurityGroupReferencesInput) String() string

String returns the string representation

func (*DescribeSecurityGroupReferencesInput) Validate added in v1.1.26 

func (s *DescribeSecurityGroupReferencesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeSecurityGroupReferencesOutput added in v1.1.26 

type DescribeSecurityGroupReferencesOutput struct {

	// Information about the VPCs with the referencing security groups.
	SecurityGroupReferenceSet []*SecurityGroupReference `locationName:"securityGroupReferenceSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

func (DescribeSecurityGroupReferencesOutput) GoString added in v1.1.26 

func (s DescribeSecurityGroupReferencesOutput) GoString() string

GoString returns the string representation

func (DescribeSecurityGroupReferencesOutput) String added in v1.1.26 

func (s DescribeSecurityGroupReferencesOutput) String() string

String returns the string representation

type DescribeSecurityGroupsInput 

type DescribeSecurityGroupsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters. If using multiple filters for rules, the results include
	// security groups for which any combination of rules - not necessarily a single
	// rule - match all filters.
	//
	//    description - The description of the security group.
	//
	//    egress.ip-permission.prefix-list-id - The ID (prefix) of the AWS service
	// to which the security group allows access.
	//
	//    group-id - The ID of the security group.
	//
	//    group-name - The name of the security group.
	//
	//    ip-permission.cidr - A CIDR range that has been granted permission.
	//
	//    ip-permission.from-port - The start of port range for the TCP and UDP
	// protocols, or an ICMP type number.
	//
	//    ip-permission.group-id - The ID of a security group that has been granted
	// permission.
	//
	//    ip-permission.group-name - The name of a security group that has been
	// granted permission.
	//
	//    ip-permission.protocol - The IP protocol for the permission (tcp | udp
	// | icmp or a protocol number).
	//
	//    ip-permission.to-port - The end of port range for the TCP and UDP protocols,
	// or an ICMP code.
	//
	//    ip-permission.user-id - The ID of an AWS account that has been granted
	// permission.
	//
	//    owner-id - The AWS account ID of the owner of the security group.
	//
	//    tag-key - The key of a tag assigned to the security group.
	//
	//    tag-value - The value of a tag assigned to the security group.
	//
	//    vpc-id - The ID of the VPC specified when the security group was created.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more security group IDs. Required for security groups in a nondefault
	// VPC.
	//
	// Default: Describes all your security groups.
	GroupIds []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"`

	// [EC2-Classic and default VPC only] One or more security group names. You
	// can specify either the security group name or the security group ID. For
	// security groups in a nondefault VPC, use the group-name filter to describe
	// security groups by name.
	//
	// Default: Describes all your security groups.
	GroupNames []*string `locationName:"GroupName" locationNameList:"GroupName" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSecurityGroups.

func (DescribeSecurityGroupsInput) GoString added in v0.6.5 

func (s DescribeSecurityGroupsInput) GoString() string

GoString returns the string representation

func (DescribeSecurityGroupsInput) String added in v0.6.5 

func (s DescribeSecurityGroupsInput) String() string

String returns the string representation

type DescribeSecurityGroupsOutput 

type DescribeSecurityGroupsOutput struct {

	// Information about one or more security groups.
	SecurityGroups []*SecurityGroup `locationName:"securityGroupInfo" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSecurityGroups.

func (DescribeSecurityGroupsOutput) GoString added in v0.6.5 

func (s DescribeSecurityGroupsOutput) GoString() string

GoString returns the string representation

func (DescribeSecurityGroupsOutput) String added in v0.6.5 

func (s DescribeSecurityGroupsOutput) String() string

String returns the string representation

type DescribeSnapshotAttributeInput 

type DescribeSnapshotAttributeInput struct {

	// The snapshot attribute you would like to view.
	Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the EBS snapshot.
	SnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSnapshotAttribute.

func (DescribeSnapshotAttributeInput) GoString added in v0.6.5 

func (s DescribeSnapshotAttributeInput) GoString() string

GoString returns the string representation

func (DescribeSnapshotAttributeInput) String added in v0.6.5 

func (s DescribeSnapshotAttributeInput) String() string

String returns the string representation

func (*DescribeSnapshotAttributeInput) Validate added in v1.1.21 

func (s *DescribeSnapshotAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeSnapshotAttributeOutput 

type DescribeSnapshotAttributeOutput struct {

	// A list of permissions for creating volumes from the snapshot.
	CreateVolumePermissions []*CreateVolumePermission `locationName:"createVolumePermission" locationNameList:"item" type:"list"`

	// A list of product codes.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// The ID of the EBS snapshot.
	SnapshotId *string `locationName:"snapshotId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSnapshotAttribute.

func (DescribeSnapshotAttributeOutput) GoString added in v0.6.5 

func (s DescribeSnapshotAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeSnapshotAttributeOutput) String added in v0.6.5 

func (s DescribeSnapshotAttributeOutput) String() string

String returns the string representation

type DescribeSnapshotsInput 

type DescribeSnapshotsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    description - A description of the snapshot.
	//
	//    owner-alias - Value from an Amazon-maintained list (amazon | aws-marketplace
	// | microsoft) of snapshot owners. Not to be confused with the user-configured
	// AWS account alias, which is set from the IAM consolew.
	//
	//    owner-id - The ID of the AWS account that owns the snapshot.
	//
	//    progress - The progress of the snapshot, as a percentage (for example,
	// 80%).
	//
	//    snapshot-id - The snapshot ID.
	//
	//    start-time - The time stamp when the snapshot was initiated.
	//
	//    status - The status of the snapshot (pending | completed | error).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    volume-id - The ID of the volume the snapshot is for.
	//
	//    volume-size - The size of the volume, in GiB.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of snapshot results returned by DescribeSnapshots in paginated
	// output. When this parameter is used, DescribeSnapshots only returns MaxResults
	// results in a single page along with a NextToken response element. The remaining
	// results of the initial request can be seen by sending another DescribeSnapshots
	// request with the returned NextToken value. This value can be between 5 and
	// 1000; if MaxResults is given a value larger than 1000, only 1000 results
	// are returned. If this parameter is not used, then DescribeSnapshots returns
	// all results. You cannot specify this parameter and the snapshot IDs parameter
	// in the same request.
	MaxResults *int64 `type:"integer"`

	// The NextToken value returned from a previous paginated DescribeSnapshots
	// request where MaxResults was used and the results exceeded the value of that
	// parameter. Pagination continues from the end of the previous results that
	// returned the NextToken value. This value is null when there are no more results
	// to return.
	NextToken *string `type:"string"`

	// Returns the snapshots owned by the specified owner. Multiple owners can be
	// specified.
	OwnerIds []*string `locationName:"Owner" locationNameList:"Owner" type:"list"`

	// One or more AWS accounts IDs that can create volumes from the snapshot.
	RestorableByUserIds []*string `locationName:"RestorableBy" type:"list"`

	// One or more snapshot IDs.
	//
	// Default: Describes snapshots for which you have launch permissions.
	SnapshotIds []*string `locationName:"SnapshotId" locationNameList:"SnapshotId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSnapshots.

func (DescribeSnapshotsInput) GoString added in v0.6.5 

func (s DescribeSnapshotsInput) GoString() string

GoString returns the string representation

func (DescribeSnapshotsInput) String added in v0.6.5 

func (s DescribeSnapshotsInput) String() string

String returns the string representation

type DescribeSnapshotsOutput 

type DescribeSnapshotsOutput struct {

	// The NextToken value to include in a future DescribeSnapshots request. When
	// the results of a DescribeSnapshots request exceed MaxResults, this value
	// can be used to retrieve the next page of results. This value is null when
	// there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the snapshots.
	Snapshots []*Snapshot `locationName:"snapshotSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSnapshots.

func (DescribeSnapshotsOutput) GoString added in v0.6.5 

func (s DescribeSnapshotsOutput) GoString() string

GoString returns the string representation

func (DescribeSnapshotsOutput) String added in v0.6.5 

func (s DescribeSnapshotsOutput) String() string

String returns the string representation

type DescribeSpotDatafeedSubscriptionInput 

type DescribeSpotDatafeedSubscriptionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotDatafeedSubscription.

func (DescribeSpotDatafeedSubscriptionInput) GoString added in v0.6.5 

func (s DescribeSpotDatafeedSubscriptionInput) GoString() string

GoString returns the string representation

func (DescribeSpotDatafeedSubscriptionInput) String added in v0.6.5 

func (s DescribeSpotDatafeedSubscriptionInput) String() string

String returns the string representation

type DescribeSpotDatafeedSubscriptionOutput 

type DescribeSpotDatafeedSubscriptionOutput struct {

	// The Spot instance data feed subscription.
	SpotDatafeedSubscription *SpotDatafeedSubscription `locationName:"spotDatafeedSubscription" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotDatafeedSubscription.

func (DescribeSpotDatafeedSubscriptionOutput) GoString added in v0.6.5 

func (s DescribeSpotDatafeedSubscriptionOutput) GoString() string

GoString returns the string representation

func (DescribeSpotDatafeedSubscriptionOutput) String added in v0.6.5 

func (s DescribeSpotDatafeedSubscriptionOutput) String() string

String returns the string representation

type DescribeSpotFleetInstancesInput 

type DescribeSpotFleetInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The maximum number of results to return in a single call. Specify a value
	// between 1 and 1000. The default value is 1000. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token for the next set of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotFleetInstances.

func (DescribeSpotFleetInstancesInput) GoString added in v0.6.5 

func (s DescribeSpotFleetInstancesInput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetInstancesInput) String added in v0.6.5 

func (s DescribeSpotFleetInstancesInput) String() string

String returns the string representation

func (*DescribeSpotFleetInstancesInput) Validate added in v1.1.21 

func (s *DescribeSpotFleetInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeSpotFleetInstancesOutput 

type DescribeSpotFleetInstancesOutput struct {

	// The running instances. Note that this list is refreshed periodically and
	// might be out of date.
	ActiveInstances []*ActiveInstance `locationName:"activeInstanceSet" locationNameList:"item" type:"list" required:"true"`

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotFleetInstances.

func (DescribeSpotFleetInstancesOutput) GoString added in v0.6.5 

func (s DescribeSpotFleetInstancesOutput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetInstancesOutput) String added in v0.6.5 

func (s DescribeSpotFleetInstancesOutput) String() string

String returns the string representation

type DescribeSpotFleetRequestHistoryInput 

type DescribeSpotFleetRequestHistoryInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The type of events to describe. By default, all events are described.
	EventType *string `locationName:"eventType" type:"string" enum:"EventType"`

	// The maximum number of results to return in a single call. Specify a value
	// between 1 and 1000. The default value is 1000. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token for the next set of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`

	// The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotFleetRequestHistory.

func (DescribeSpotFleetRequestHistoryInput) GoString added in v0.6.5 

func (s DescribeSpotFleetRequestHistoryInput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetRequestHistoryInput) String added in v0.6.5 

func (s DescribeSpotFleetRequestHistoryInput) String() string

String returns the string representation

func (*DescribeSpotFleetRequestHistoryInput) Validate added in v1.1.21 

func (s *DescribeSpotFleetRequestHistoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeSpotFleetRequestHistoryOutput 

type DescribeSpotFleetRequestHistoryOutput struct {

	// Information about the events in the history of the Spot fleet request.
	HistoryRecords []*HistoryRecord `locationName:"historyRecordSet" locationNameList:"item" type:"list" required:"true"`

	// The last date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	// All records up to this time were retrieved.
	//
	// If nextToken indicates that there are more results, this value is not present.
	LastEvaluatedTime *time.Time `locationName:"lastEvaluatedTime" type:"timestamp" timestampFormat:"iso8601" required:"true"`

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`

	// The starting date and time for the events, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotFleetRequestHistory.

func (DescribeSpotFleetRequestHistoryOutput) GoString added in v0.6.5 

func (s DescribeSpotFleetRequestHistoryOutput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetRequestHistoryOutput) String added in v0.6.5 

func (s DescribeSpotFleetRequestHistoryOutput) String() string

String returns the string representation

type DescribeSpotFleetRequestsInput 

type DescribeSpotFleetRequestsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The maximum number of results to return in a single call. Specify a value
	// between 1 and 1000. The default value is 1000. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token for the next set of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The IDs of the Spot fleet requests.
	SpotFleetRequestIds []*string `locationName:"spotFleetRequestId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotFleetRequests.

func (DescribeSpotFleetRequestsInput) GoString added in v0.6.5 

func (s DescribeSpotFleetRequestsInput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetRequestsInput) String added in v0.6.5 

func (s DescribeSpotFleetRequestsInput) String() string

String returns the string representation

type DescribeSpotFleetRequestsOutput 

type DescribeSpotFleetRequestsOutput struct {

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the configuration of your Spot fleet.
	SpotFleetRequestConfigs []*SpotFleetRequestConfig `locationName:"spotFleetRequestConfigSet" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotFleetRequests.

func (DescribeSpotFleetRequestsOutput) GoString added in v0.6.5 

func (s DescribeSpotFleetRequestsOutput) GoString() string

GoString returns the string representation

func (DescribeSpotFleetRequestsOutput) String added in v0.6.5 

func (s DescribeSpotFleetRequestsOutput) String() string

String returns the string representation

type DescribeSpotInstanceRequestsInput 

type DescribeSpotInstanceRequestsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    availability-zone-group - The Availability Zone group.
	//
	//    create-time - The time stamp when the Spot instance request was created.
	//
	//    fault-code - The fault code related to the request.
	//
	//    fault-message - The fault message related to the request.
	//
	//    instance-id - The ID of the instance that fulfilled the request.
	//
	//    launch-group - The Spot instance launch group.
	//
	//    launch.block-device-mapping.delete-on-termination - Indicates whether
	// the Amazon EBS volume is deleted on instance termination.
	//
	//    launch.block-device-mapping.device-name - The device name for the Amazon
	// EBS volume (for example, /dev/sdh).
	//
	//    launch.block-device-mapping.snapshot-id - The ID of the snapshot used
	// for the Amazon EBS volume.
	//
	//    launch.block-device-mapping.volume-size - The size of the Amazon EBS
	// volume, in GiB.
	//
	//    launch.block-device-mapping.volume-type - The type of the Amazon EBS
	// volume: gp2 for General Purpose SSD, io1 for Provisioned IOPS SSD, st1 for
	// Throughput Optimized HDD, sc1for Cold HDD, or standard for Magnetic.
	//
	//    launch.group-id - The security group for the instance.
	//
	//    launch.image-id - The ID of the AMI.
	//
	//    launch.instance-type - The type of instance (for example, m3.medium).
	//
	//    launch.kernel-id - The kernel ID.
	//
	//    launch.key-name - The name of the key pair the instance launched with.
	//
	//    launch.monitoring-enabled - Whether monitoring is enabled for the Spot
	// instance.
	//
	//    launch.ramdisk-id - The RAM disk ID.
	//
	//    network-interface.network-interface-id - The ID of the network interface.
	//
	//    network-interface.device-index - The index of the device for the network
	// interface attachment on the instance.
	//
	//    network-interface.subnet-id - The ID of the subnet for the instance.
	//
	//    network-interface.description - A description of the network interface.
	//
	//    network-interface.private-ip-address - The primary private IP address
	// of the network interface.
	//
	//    network-interface.delete-on-termination - Indicates whether the network
	// interface is deleted when the instance is terminated.
	//
	//    network-interface.group-id - The ID of the security group associated
	// with the network interface.
	//
	//    network-interface.group-name - The name of the security group associated
	// with the network interface.
	//
	//    network-interface.addresses.primary - Indicates whether the IP address
	// is the primary private IP address.
	//
	//    product-description - The product description associated with the instance
	// (Linux/UNIX | Windows).
	//
	//    spot-instance-request-id - The Spot instance request ID.
	//
	//    spot-price - The maximum hourly price for any Spot instance launched
	// to fulfill the request.
	//
	//    state - The state of the Spot instance request (open | active | closed
	// | cancelled | failed). Spot bid status information can help you track your
	// Amazon EC2 Spot instance requests. For more information, see Spot Bid Status
	// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	//
	//    status-code - The short code describing the most recent evaluation of
	// your Spot instance request.
	//
	//    status-message - The message explaining the status of the Spot instance
	// request.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    type - The type of Spot instance request (one-time | persistent).
	//
	//    launched-availability-zone - The Availability Zone in which the bid is
	// launched.
	//
	//    valid-from - The start date of the request.
	//
	//    valid-until - The end date of the request.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more Spot instance request IDs.
	SpotInstanceRequestIds []*string `locationName:"SpotInstanceRequestId" locationNameList:"SpotInstanceRequestId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotInstanceRequests.

func (DescribeSpotInstanceRequestsInput) GoString added in v0.6.5 

func (s DescribeSpotInstanceRequestsInput) GoString() string

GoString returns the string representation

func (DescribeSpotInstanceRequestsInput) String added in v0.6.5 

func (s DescribeSpotInstanceRequestsInput) String() string

String returns the string representation

type DescribeSpotInstanceRequestsOutput 

type DescribeSpotInstanceRequestsOutput struct {

	// One or more Spot instance requests.
	SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotInstanceRequests.

func (DescribeSpotInstanceRequestsOutput) GoString added in v0.6.5 

func (s DescribeSpotInstanceRequestsOutput) GoString() string

GoString returns the string representation

func (DescribeSpotInstanceRequestsOutput) String added in v0.6.5 

func (s DescribeSpotInstanceRequestsOutput) String() string

String returns the string representation

type DescribeSpotPriceHistoryInput 

type DescribeSpotPriceHistoryInput struct {

	// Filters the results by the specified Availability Zone.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The date and time, up to the current date, from which to stop retrieving
	// the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	EndTime *time.Time `locationName:"endTime" type:"timestamp" timestampFormat:"iso8601"`

	// One or more filters.
	//
	//    availability-zone - The Availability Zone for which prices should be
	// returned.
	//
	//    instance-type - The type of instance (for example, m3.medium).
	//
	//    product-description - The product description for the Spot price (Linux/UNIX
	// | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | SUSE Linux (Amazon VPC)
	// | Windows (Amazon VPC)).
	//
	//    spot-price - The Spot price. The value must match exactly (or use wildcards;
	// greater than or less than comparison is not supported).
	//
	//    timestamp - The timestamp of the Spot price history, in UTC format (for
	// example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). Greater
	// than or less than comparison is not supported.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// Filters the results by the specified instance types.
	InstanceTypes []*string `locationName:"InstanceType" type:"list"`

	// The maximum number of results to return in a single call. Specify a value
	// between 1 and 1000. The default value is 1000. To retrieve the remaining
	// results, make another call with the returned NextToken value.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token for the next set of results.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Filters the results by the specified basic product descriptions.
	ProductDescriptions []*string `locationName:"ProductDescription" type:"list"`

	// The date and time, up to the past 90 days, from which to start retrieving
	// the price history data, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSpotPriceHistory.

func (DescribeSpotPriceHistoryInput) GoString added in v0.6.5 

func (s DescribeSpotPriceHistoryInput) GoString() string

GoString returns the string representation

func (DescribeSpotPriceHistoryInput) String added in v0.6.5 

func (s DescribeSpotPriceHistoryInput) String() string

String returns the string representation

type DescribeSpotPriceHistoryOutput 

type DescribeSpotPriceHistoryOutput struct {

	// The token required to retrieve the next set of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The historical Spot prices.
	SpotPriceHistory []*SpotPrice `locationName:"spotPriceHistorySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSpotPriceHistory.

func (DescribeSpotPriceHistoryOutput) GoString added in v0.6.5 

func (s DescribeSpotPriceHistoryOutput) GoString() string

GoString returns the string representation

func (DescribeSpotPriceHistoryOutput) String added in v0.6.5 

func (s DescribeSpotPriceHistoryOutput) String() string

String returns the string representation

type DescribeStaleSecurityGroupsInput added in v1.1.26 

type DescribeStaleSecurityGroupsInput struct {

	// Checks whether you have the required permissions for the operation, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	MaxResults *int64 `min:"5" type:"integer"`

	// The token for the next set of items to return. (You received this token from
	// a prior call.)
	NextToken *string `min:"1" type:"string"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeStaleSecurityGroupsInput) GoString added in v1.1.26 

func (s DescribeStaleSecurityGroupsInput) GoString() string

GoString returns the string representation

func (DescribeStaleSecurityGroupsInput) String added in v1.1.26 

func (s DescribeStaleSecurityGroupsInput) String() string

String returns the string representation

func (*DescribeStaleSecurityGroupsInput) Validate added in v1.1.26 

func (s *DescribeStaleSecurityGroupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeStaleSecurityGroupsOutput added in v1.1.26 

type DescribeStaleSecurityGroupsOutput struct {

	// The token to use when requesting the next set of items. If there are no additional
	// items to return, the string is empty.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the stale security groups.
	StaleSecurityGroupSet []*StaleSecurityGroup `locationName:"staleSecurityGroupSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

func (DescribeStaleSecurityGroupsOutput) GoString added in v1.1.26 

func (s DescribeStaleSecurityGroupsOutput) GoString() string

GoString returns the string representation

func (DescribeStaleSecurityGroupsOutput) String added in v1.1.26 

func (s DescribeStaleSecurityGroupsOutput) String() string

String returns the string representation

type DescribeSubnetsInput 

type DescribeSubnetsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    availabilityZone - The Availability Zone for the subnet. You can also
	// use availability-zone as the filter name.
	//
	//    available-ip-address-count - The number of IP addresses in the subnet
	// that are available.
	//
	//    cidrBlock - The CIDR block of the subnet. The CIDR block you specify
	// must exactly match the subnet's CIDR block for information to be returned
	// for the subnet. You can also use cidr or cidr-block as the filter names.
	//
	//    defaultForAz - Indicates whether this is the default subnet for the Availability
	// Zone. You can also use default-for-az as the filter name.
	//
	//    state - The state of the subnet (pending | available).
	//
	//    subnet-id - The ID of the subnet.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC for the subnet.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more subnet IDs.
	//
	// Default: Describes all your subnets.
	SubnetIds []*string `locationName:"SubnetId" locationNameList:"SubnetId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSubnets.

func (DescribeSubnetsInput) GoString added in v0.6.5 

func (s DescribeSubnetsInput) GoString() string

GoString returns the string representation

func (DescribeSubnetsInput) String added in v0.6.5 

func (s DescribeSubnetsInput) String() string

String returns the string representation

type DescribeSubnetsOutput 

type DescribeSubnetsOutput struct {

	// Information about one or more subnets.
	Subnets []*Subnet `locationName:"subnetSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSubnets.

func (DescribeSubnetsOutput) GoString added in v0.6.5 

func (s DescribeSubnetsOutput) GoString() string

GoString returns the string representation

func (DescribeSubnetsOutput) String added in v0.6.5 

func (s DescribeSubnetsOutput) String() string

String returns the string representation

type DescribeTagsInput 

type DescribeTagsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    key - The tag key.
	//
	//    resource-id - The resource ID.
	//
	//    resource-type - The resource type (customer-gateway | dhcp-options |
	// image | instance | internet-gateway | network-acl | network-interface | reserved-instances
	// | route-table | security-group | snapshot | spot-instances-request | subnet
	// | volume | vpc | vpn-connection | vpn-gateway).
	//
	//    value - The tag value.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of results to return in a single call. This value can
	// be between 5 and 1000. To retrieve the remaining results, make another call
	// with the returned NextToken value.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The token to retrieve the next page of results.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeTags.

func (DescribeTagsInput) GoString added in v0.6.5 

func (s DescribeTagsInput) GoString() string

GoString returns the string representation

func (DescribeTagsInput) String added in v0.6.5 

func (s DescribeTagsInput) String() string

String returns the string representation

type DescribeTagsOutput 

type DescribeTagsOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return..
	NextToken *string `locationName:"nextToken" type:"string"`

	// A list of tags.
	Tags []*TagDescription `locationName:"tagSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeTags.

func (DescribeTagsOutput) GoString added in v0.6.5 

func (s DescribeTagsOutput) GoString() string

GoString returns the string representation

func (DescribeTagsOutput) String added in v0.6.5 

func (s DescribeTagsOutput) String() string

String returns the string representation

type DescribeVolumeAttributeInput 

type DescribeVolumeAttributeInput struct {

	// The instance attribute.
	Attribute *string `type:"string" enum:"VolumeAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the volume.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVolumeAttribute.

func (DescribeVolumeAttributeInput) GoString added in v0.6.5 

func (s DescribeVolumeAttributeInput) GoString() string

GoString returns the string representation

func (DescribeVolumeAttributeInput) String added in v0.6.5 

func (s DescribeVolumeAttributeInput) String() string

String returns the string representation

func (*DescribeVolumeAttributeInput) Validate added in v1.1.21 

func (s *DescribeVolumeAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeVolumeAttributeOutput 

type DescribeVolumeAttributeOutput struct {

	// The state of autoEnableIO attribute.
	AutoEnableIO *AttributeBooleanValue `locationName:"autoEnableIO" type:"structure"`

	// A list of product codes.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// The ID of the volume.
	VolumeId *string `locationName:"volumeId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVolumeAttribute.

func (DescribeVolumeAttributeOutput) GoString added in v0.6.5 

func (s DescribeVolumeAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeVolumeAttributeOutput) String added in v0.6.5 

func (s DescribeVolumeAttributeOutput) String() string

String returns the string representation

type DescribeVolumeStatusInput 

type DescribeVolumeStatusInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    action.code - The action code for the event (for example, enable-volume-io).
	//
	//    action.description - A description of the action.
	//
	//    action.event-id - The event ID associated with the action.
	//
	//    availability-zone - The Availability Zone of the instance.
	//
	//    event.description - A description of the event.
	//
	//    event.event-id - The event ID.
	//
	//    event.event-type - The event type (for io-enabled: passed | failed; for
	// io-performance: io-performance:degraded | io-performance:severely-degraded
	// | io-performance:stalled).
	//
	//    event.not-after - The latest end time for the event.
	//
	//    event.not-before - The earliest start time for the event.
	//
	//    volume-status.details-name - The cause for volume-status.status (io-enabled
	// | io-performance).
	//
	//    volume-status.details-status - The status of volume-status.details-name
	// (for io-enabled: passed | failed; for io-performance: normal | degraded |
	// severely-degraded | stalled).
	//
	//    volume-status.status - The status of the volume (ok | impaired | warning
	// | insufficient-data).
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of volume results returned by DescribeVolumeStatus in
	// paginated output. When this parameter is used, the request only returns MaxResults
	// results in a single page along with a NextToken response element. The remaining
	// results of the initial request can be seen by sending another request with
	// the returned NextToken value. This value can be between 5 and 1000; if MaxResults
	// is given a value larger than 1000, only 1000 results are returned. If this
	// parameter is not used, then DescribeVolumeStatus returns all results. You
	// cannot specify this parameter and the volume IDs parameter in the same request.
	MaxResults *int64 `type:"integer"`

	// The NextToken value to include in a future DescribeVolumeStatus request.
	// When the results of the request exceed MaxResults, this value can be used
	// to retrieve the next page of results. This value is null when there are no
	// more results to return.
	NextToken *string `type:"string"`

	// One or more volume IDs.
	//
	// Default: Describes all your volumes.
	VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVolumeStatus.

func (DescribeVolumeStatusInput) GoString added in v0.6.5 

func (s DescribeVolumeStatusInput) GoString() string

GoString returns the string representation

func (DescribeVolumeStatusInput) String added in v0.6.5 

func (s DescribeVolumeStatusInput) String() string

String returns the string representation

type DescribeVolumeStatusOutput 

type DescribeVolumeStatusOutput struct {

	// The token to use to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// A list of volumes.
	VolumeStatuses []*VolumeStatusItem `locationName:"volumeStatusSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVolumeStatus.

func (DescribeVolumeStatusOutput) GoString added in v0.6.5 

func (s DescribeVolumeStatusOutput) GoString() string

GoString returns the string representation

func (DescribeVolumeStatusOutput) String added in v0.6.5 

func (s DescribeVolumeStatusOutput) String() string

String returns the string representation

type DescribeVolumesInput 

type DescribeVolumesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    attachment.attach-time - The time stamp when the attachment initiated.
	//
	//    attachment.delete-on-termination - Whether the volume is deleted on instance
	// termination.
	//
	//    attachment.device - The device name that is exposed to the instance (for
	// example, /dev/sda1).
	//
	//    attachment.instance-id - The ID of the instance the volume is attached
	// to.
	//
	//    attachment.status - The attachment state (attaching | attached | detaching
	// | detached).
	//
	//    availability-zone - The Availability Zone in which the volume was created.
	//
	//    create-time - The time stamp when the volume was created.
	//
	//    encrypted - The encryption status of the volume.
	//
	//    size - The size of the volume, in GiB.
	//
	//    snapshot-id - The snapshot from which the volume was created.
	//
	//    status - The status of the volume (creating | available | in-use | deleting
	// | deleted | error).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    volume-id - The volume ID.
	//
	//    volume-type - The Amazon EBS volume type. This can be gp2 for General
	// Purpose SSD, io1 for Provisioned IOPS SSD, st1 for Throughput Optimized HDD,
	// sc1 for Cold HDD, or standard for Magnetic volumes.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of volume results returned by DescribeVolumes in paginated
	// output. When this parameter is used, DescribeVolumes only returns MaxResults
	// results in a single page along with a NextToken response element. The remaining
	// results of the initial request can be seen by sending another DescribeVolumes
	// request with the returned NextToken value. This value can be between 5 and
	// 1000; if MaxResults is given a value larger than 1000, only 1000 results
	// are returned. If this parameter is not used, then DescribeVolumes returns
	// all results. You cannot specify this parameter and the volume IDs parameter
	// in the same request.
	MaxResults *int64 `locationName:"maxResults" type:"integer"`

	// The NextToken value returned from a previous paginated DescribeVolumes request
	// where MaxResults was used and the results exceeded the value of that parameter.
	// Pagination continues from the end of the previous results that returned the
	// NextToken value. This value is null when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// One or more volume IDs.
	VolumeIds []*string `locationName:"VolumeId" locationNameList:"VolumeId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVolumes.

func (DescribeVolumesInput) GoString added in v0.6.5 

func (s DescribeVolumesInput) GoString() string

GoString returns the string representation

func (DescribeVolumesInput) String added in v0.6.5 

func (s DescribeVolumesInput) String() string

String returns the string representation

type DescribeVolumesOutput 

type DescribeVolumesOutput struct {

	// The NextToken value to include in a future DescribeVolumes request. When
	// the results of a DescribeVolumes request exceed MaxResults, this value can
	// be used to retrieve the next page of results. This value is null when there
	// are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the volumes.
	Volumes []*Volume `locationName:"volumeSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVolumes.

func (DescribeVolumesOutput) GoString added in v0.6.5 

func (s DescribeVolumesOutput) GoString() string

GoString returns the string representation

func (DescribeVolumesOutput) String added in v0.6.5 

func (s DescribeVolumesOutput) String() string

String returns the string representation

type DescribeVpcAttributeInput added in v0.9.5 

type DescribeVpcAttributeInput struct {

	// The VPC attribute.
	Attribute *string `type:"string" required:"true" enum:"VpcAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcAttribute.

func (DescribeVpcAttributeInput) GoString added in v0.9.5 

func (s DescribeVpcAttributeInput) GoString() string

GoString returns the string representation

func (DescribeVpcAttributeInput) String added in v0.9.5 

func (s DescribeVpcAttributeInput) String() string

String returns the string representation

func (*DescribeVpcAttributeInput) Validate added in v1.1.21 

func (s *DescribeVpcAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeVpcAttributeOutput added in v0.9.5 

type DescribeVpcAttributeOutput struct {

	// Indicates whether the instances launched in the VPC get DNS hostnames. If
	// this attribute is true, instances in the VPC get DNS hostnames; otherwise,
	// they do not.
	EnableDnsHostnames *AttributeBooleanValue `locationName:"enableDnsHostnames" type:"structure"`

	// Indicates whether DNS resolution is enabled for the VPC. If this attribute
	// is true, the Amazon DNS server resolves DNS hostnames for your instances
	// to their corresponding IP addresses; otherwise, it does not.
	EnableDnsSupport *AttributeBooleanValue `locationName:"enableDnsSupport" type:"structure"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcAttribute.

func (DescribeVpcAttributeOutput) GoString added in v0.9.5 

func (s DescribeVpcAttributeOutput) GoString() string

GoString returns the string representation

func (DescribeVpcAttributeOutput) String added in v0.9.5 

func (s DescribeVpcAttributeOutput) String() string

String returns the string representation

type DescribeVpcClassicLinkDnsSupportInput added in v1.0.8 

type DescribeVpcClassicLinkDnsSupportInput struct {

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	MaxResults *int64 `locationName:"maxResults" min:"5" type:"integer"`

	// The token for the next set of items to return. (You received this token from
	// a prior call.)
	NextToken *string `locationName:"nextToken" min:"1" type:"string"`

	// One or more VPC IDs.
	VpcIds []*string `locationNameList:"VpcId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcClassicLinkDnsSupport.

func (DescribeVpcClassicLinkDnsSupportInput) GoString added in v1.0.8 

func (s DescribeVpcClassicLinkDnsSupportInput) GoString() string

GoString returns the string representation

func (DescribeVpcClassicLinkDnsSupportInput) String added in v1.0.8 

func (s DescribeVpcClassicLinkDnsSupportInput) String() string

String returns the string representation

func (*DescribeVpcClassicLinkDnsSupportInput) Validate added in v1.1.21 

func (s *DescribeVpcClassicLinkDnsSupportInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeVpcClassicLinkDnsSupportOutput added in v1.0.8 

type DescribeVpcClassicLinkDnsSupportOutput struct {

	// The token to use when requesting the next set of items.
	NextToken *string `locationName:"nextToken" min:"1" type:"string"`

	// Information about the ClassicLink DNS support status of the VPCs.
	Vpcs []*ClassicLinkDnsSupport `locationName:"vpcs" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcClassicLinkDnsSupport.

func (DescribeVpcClassicLinkDnsSupportOutput) GoString added in v1.0.8 

func (s DescribeVpcClassicLinkDnsSupportOutput) GoString() string

GoString returns the string representation

func (DescribeVpcClassicLinkDnsSupportOutput) String added in v1.0.8 

func (s DescribeVpcClassicLinkDnsSupportOutput) String() string

String returns the string representation

type DescribeVpcClassicLinkInput added in v0.9.5 

type DescribeVpcClassicLinkInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    is-classic-link-enabled - Whether the VPC is enabled for ClassicLink
	// (true | false).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more VPCs for which you want to describe the ClassicLink status.
	VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcClassicLink.

func (DescribeVpcClassicLinkInput) GoString added in v0.9.5 

func (s DescribeVpcClassicLinkInput) GoString() string

GoString returns the string representation

func (DescribeVpcClassicLinkInput) String added in v0.9.5 

func (s DescribeVpcClassicLinkInput) String() string

String returns the string representation

type DescribeVpcClassicLinkOutput added in v0.9.5 

type DescribeVpcClassicLinkOutput struct {

	// The ClassicLink status of one or more VPCs.
	Vpcs []*VpcClassicLink `locationName:"vpcSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcClassicLink.

func (DescribeVpcClassicLinkOutput) GoString added in v0.9.5 

func (s DescribeVpcClassicLinkOutput) GoString() string

GoString returns the string representation

func (DescribeVpcClassicLinkOutput) String added in v0.9.5 

func (s DescribeVpcClassicLinkOutput) String() string

String returns the string representation

type DescribeVpcEndpointServicesInput added in v0.9.5 

type DescribeVpcEndpointServicesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	//
	// Constraint: If the value is greater than 1000, we return only 1000 items.
	MaxResults *int64 `type:"integer"`

	// The token for the next set of items to return. (You received this token from
	// a prior call.)
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcEndpointServices.

func (DescribeVpcEndpointServicesInput) GoString added in v0.9.5 

func (s DescribeVpcEndpointServicesInput) GoString() string

GoString returns the string representation

func (DescribeVpcEndpointServicesInput) String added in v0.9.5 

func (s DescribeVpcEndpointServicesInput) String() string

String returns the string representation

type DescribeVpcEndpointServicesOutput added in v0.9.5 

type DescribeVpcEndpointServicesOutput struct {

	// The token to use when requesting the next set of items. If there are no additional
	// items to return, the string is empty.
	NextToken *string `locationName:"nextToken" type:"string"`

	// A list of supported AWS services.
	ServiceNames []*string `locationName:"serviceNameSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcEndpointServices.

func (DescribeVpcEndpointServicesOutput) GoString added in v0.9.5 

func (s DescribeVpcEndpointServicesOutput) GoString() string

GoString returns the string representation

func (DescribeVpcEndpointServicesOutput) String added in v0.9.5 

func (s DescribeVpcEndpointServicesOutput) String() string

String returns the string representation

type DescribeVpcEndpointsInput added in v0.9.5 

type DescribeVpcEndpointsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more filters.
	//
	//    service-name: The name of the AWS service.
	//
	//    vpc-id: The ID of the VPC in which the endpoint resides.
	//
	//    vpc-endpoint-id: The ID of the endpoint.
	//
	//    vpc-endpoint-state: The state of the endpoint. (pending | available |
	// deleting | deleted)
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// The maximum number of items to return for this request. The request returns
	// a token that you can specify in a subsequent call to get the next set of
	// results.
	//
	// Constraint: If the value is greater than 1000, we return only 1000 items.
	MaxResults *int64 `type:"integer"`

	// The token for the next set of items to return. (You received this token from
	// a prior call.)
	NextToken *string `type:"string"`

	// One or more endpoint IDs.
	VpcEndpointIds []*string `locationName:"VpcEndpointId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcEndpoints.

func (DescribeVpcEndpointsInput) GoString added in v0.9.5 

func (s DescribeVpcEndpointsInput) GoString() string

GoString returns the string representation

func (DescribeVpcEndpointsInput) String added in v0.9.5 

func (s DescribeVpcEndpointsInput) String() string

String returns the string representation

type DescribeVpcEndpointsOutput added in v0.9.5 

type DescribeVpcEndpointsOutput struct {

	// The token to use when requesting the next set of items. If there are no additional
	// items to return, the string is empty.
	NextToken *string `locationName:"nextToken" type:"string"`

	// Information about the endpoints.
	VpcEndpoints []*VpcEndpoint `locationName:"vpcEndpointSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcEndpoints.

func (DescribeVpcEndpointsOutput) GoString added in v0.9.5 

func (s DescribeVpcEndpointsOutput) GoString() string

GoString returns the string representation

func (DescribeVpcEndpointsOutput) String added in v0.9.5 

func (s DescribeVpcEndpointsOutput) String() string

String returns the string representation

type DescribeVpcPeeringConnectionsInput added in v0.9.5 

type DescribeVpcPeeringConnectionsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    accepter-vpc-info.cidr-block - The CIDR block of the peer VPC.
	//
	//    accepter-vpc-info.owner-id - The AWS account ID of the owner of the peer
	// VPC.
	//
	//    accepter-vpc-info.vpc-id - The ID of the peer VPC.
	//
	//    expiration-time - The expiration date and time for the VPC peering connection.
	//
	//    requester-vpc-info.cidr-block - The CIDR block of the requester's VPC.
	//
	//    requester-vpc-info.owner-id - The AWS account ID of the owner of the
	// requester VPC.
	//
	//    requester-vpc-info.vpc-id - The ID of the requester VPC.
	//
	//    status-code - The status of the VPC peering connection (pending-acceptance
	// | failed | expired | provisioning | active | deleted | rejected).
	//
	//    status-message - A message that provides more information about the status
	// of the VPC peering connection, if applicable.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-peering-connection-id - The ID of the VPC peering connection.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more VPC peering connection IDs.
	//
	// Default: Describes all your VPC peering connections.
	VpcPeeringConnectionIds []*string `locationName:"VpcPeeringConnectionId" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcPeeringConnections.

func (DescribeVpcPeeringConnectionsInput) GoString added in v0.9.5 

func (s DescribeVpcPeeringConnectionsInput) GoString() string

GoString returns the string representation

func (DescribeVpcPeeringConnectionsInput) String added in v0.9.5 

func (s DescribeVpcPeeringConnectionsInput) String() string

String returns the string representation

type DescribeVpcPeeringConnectionsOutput added in v0.9.5 

type DescribeVpcPeeringConnectionsOutput struct {

	// Information about the VPC peering connections.
	VpcPeeringConnections []*VpcPeeringConnection `locationName:"vpcPeeringConnectionSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcPeeringConnections.

func (DescribeVpcPeeringConnectionsOutput) GoString added in v0.9.5 

func (s DescribeVpcPeeringConnectionsOutput) GoString() string

GoString returns the string representation

func (DescribeVpcPeeringConnectionsOutput) String added in v0.9.5 

func (s DescribeVpcPeeringConnectionsOutput) String() string

String returns the string representation

type DescribeVpcsInput added in v0.9.5 

type DescribeVpcsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    cidr - The CIDR block of the VPC. The CIDR block you specify must exactly
	// match the VPC's CIDR block for information to be returned for the VPC. Must
	// contain the slash followed by one or two digits (for example, /28).
	//
	//    dhcp-options-id - The ID of a set of DHCP options.
	//
	//    isDefault - Indicates whether the VPC is the default VPC.
	//
	//    state - The state of the VPC (pending | available).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    vpc-id - The ID of the VPC.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more VPC IDs.
	//
	// Default: Describes all your VPCs.
	VpcIds []*string `locationName:"VpcId" locationNameList:"VpcId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpcs.

func (DescribeVpcsInput) GoString added in v0.9.5 

func (s DescribeVpcsInput) GoString() string

GoString returns the string representation

func (DescribeVpcsInput) String added in v0.9.5 

func (s DescribeVpcsInput) String() string

String returns the string representation

type DescribeVpcsOutput added in v0.9.5 

type DescribeVpcsOutput struct {

	// Information about one or more VPCs.
	Vpcs []*Vpc `locationName:"vpcSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpcs.

func (DescribeVpcsOutput) GoString added in v0.9.5 

func (s DescribeVpcsOutput) GoString() string

GoString returns the string representation

func (DescribeVpcsOutput) String added in v0.9.5 

func (s DescribeVpcsOutput) String() string

String returns the string representation

type DescribeVpnConnectionsInput added in v0.9.5 

type DescribeVpnConnectionsInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    customer-gateway-configuration - The configuration information for the
	// customer gateway.
	//
	//    customer-gateway-id - The ID of a customer gateway associated with the
	// VPN connection.
	//
	//    state - The state of the VPN connection (pending | available | deleting
	// | deleted).
	//
	//    option.static-routes-only - Indicates whether the connection has static
	// routes only. Used for devices that do not support Border Gateway Protocol
	// (BGP).
	//
	//    route.destination-cidr-block - The destination CIDR block. This corresponds
	// to the subnet used in a customer data center.
	//
	//    bgp-asn - The BGP Autonomous System Number (ASN) associated with a BGP
	// device.
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    type - The type of VPN connection. Currently the only supported type
	// is ipsec.1.
	//
	//    vpn-connection-id - The ID of the VPN connection.
	//
	//    vpn-gateway-id - The ID of a virtual private gateway associated with
	// the VPN connection.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more VPN connection IDs.
	//
	// Default: Describes your VPN connections.
	VpnConnectionIds []*string `locationName:"VpnConnectionId" locationNameList:"VpnConnectionId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpnConnections.

func (DescribeVpnConnectionsInput) GoString added in v0.9.5 

func (s DescribeVpnConnectionsInput) GoString() string

GoString returns the string representation

func (DescribeVpnConnectionsInput) String added in v0.9.5 

func (s DescribeVpnConnectionsInput) String() string

String returns the string representation

type DescribeVpnConnectionsOutput added in v0.9.5 

type DescribeVpnConnectionsOutput struct {

	// Information about one or more VPN connections.
	VpnConnections []*VpnConnection `locationName:"vpnConnectionSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpnConnections.

func (DescribeVpnConnectionsOutput) GoString added in v0.9.5 

func (s DescribeVpnConnectionsOutput) GoString() string

GoString returns the string representation

func (DescribeVpnConnectionsOutput) String added in v0.9.5 

func (s DescribeVpnConnectionsOutput) String() string

String returns the string representation

type DescribeVpnGatewaysInput added in v0.9.5 

type DescribeVpnGatewaysInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more filters.
	//
	//    attachment.state - The current state of the attachment between the gateway
	// and the VPC (attaching | attached | detaching | detached).
	//
	//    attachment.vpc-id - The ID of an attached VPC.
	//
	//    availability-zone - The Availability Zone for the virtual private gateway
	// (if applicable).
	//
	//    state - The state of the virtual private gateway (pending | available
	// | deleting | deleted).
	//
	//    tag:key=value - The key/value combination of a tag assigned to the resource.
	//
	//    tag-key - The key of a tag assigned to the resource. This filter is independent
	// of the tag-value filter. For example, if you use both the filter "tag-key=Purpose"
	// and the filter "tag-value=X", you get any resources assigned both the tag
	// key Purpose (regardless of what the tag's value is), and the tag value X
	// (regardless of what the tag's key is). If you want to list only resources
	// where Purpose is X, see the tag:key=value filter.
	//
	//    tag-value - The value of a tag assigned to the resource. This filter
	// is independent of the tag-key filter.
	//
	//    type - The type of virtual private gateway. Currently the only supported
	// type is ipsec.1.
	//
	//    vpn-gateway-id - The ID of the virtual private gateway.
	Filters []*Filter `locationName:"Filter" locationNameList:"Filter" type:"list"`

	// One or more virtual private gateway IDs.
	//
	// Default: Describes all your virtual private gateways.
	VpnGatewayIds []*string `locationName:"VpnGatewayId" locationNameList:"VpnGatewayId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeVpnGateways.

func (DescribeVpnGatewaysInput) GoString added in v0.9.5 

func (s DescribeVpnGatewaysInput) GoString() string

GoString returns the string representation

func (DescribeVpnGatewaysInput) String added in v0.9.5 

func (s DescribeVpnGatewaysInput) String() string

String returns the string representation

type DescribeVpnGatewaysOutput added in v0.9.5 

type DescribeVpnGatewaysOutput struct {

	// Information about one or more virtual private gateways.
	VpnGateways []*VpnGateway `locationName:"vpnGatewaySet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeVpnGateways.

func (DescribeVpnGatewaysOutput) GoString added in v0.9.5 

func (s DescribeVpnGatewaysOutput) GoString() string

GoString returns the string representation

func (DescribeVpnGatewaysOutput) String added in v0.9.5 

func (s DescribeVpnGatewaysOutput) String() string

String returns the string representation

type DetachClassicLinkVpcInput added in v0.9.5 

type DetachClassicLinkVpcInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance to unlink from the VPC.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// The ID of the VPC to which the instance is linked.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DetachClassicLinkVpc.

func (DetachClassicLinkVpcInput) GoString added in v0.9.5 

func (s DetachClassicLinkVpcInput) GoString() string

GoString returns the string representation

func (DetachClassicLinkVpcInput) String added in v0.9.5 

func (s DetachClassicLinkVpcInput) String() string

String returns the string representation

func (*DetachClassicLinkVpcInput) Validate added in v1.1.21 

func (s *DetachClassicLinkVpcInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachClassicLinkVpcOutput added in v0.9.5 

type DetachClassicLinkVpcOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of DetachClassicLinkVpc.

func (DetachClassicLinkVpcOutput) GoString added in v0.9.5 

func (s DetachClassicLinkVpcOutput) GoString() string

GoString returns the string representation

func (DetachClassicLinkVpcOutput) String added in v0.9.5 

func (s DetachClassicLinkVpcOutput) String() string

String returns the string representation

type DetachInternetGatewayInput 

type DetachInternetGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the Internet gateway.
	InternetGatewayId *string `locationName:"internetGatewayId" type:"string" required:"true"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DetachInternetGateway.

func (DetachInternetGatewayInput) GoString added in v0.6.5 

func (s DetachInternetGatewayInput) GoString() string

GoString returns the string representation

func (DetachInternetGatewayInput) String added in v0.6.5 

func (s DetachInternetGatewayInput) String() string

String returns the string representation

func (*DetachInternetGatewayInput) Validate added in v1.1.21 

func (s *DetachInternetGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachInternetGatewayOutput 

type DetachInternetGatewayOutput struct {
	// contains filtered or unexported fields
}

func (DetachInternetGatewayOutput) GoString added in v0.6.5 

func (s DetachInternetGatewayOutput) GoString() string

GoString returns the string representation

func (DetachInternetGatewayOutput) String added in v0.6.5 

func (s DetachInternetGatewayOutput) String() string

String returns the string representation

type DetachNetworkInterfaceInput 

type DetachNetworkInterfaceInput struct {

	// The ID of the attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Specifies whether to force a detachment.
	Force *bool `locationName:"force" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DetachNetworkInterface.

func (DetachNetworkInterfaceInput) GoString added in v0.6.5 

func (s DetachNetworkInterfaceInput) GoString() string

GoString returns the string representation

func (DetachNetworkInterfaceInput) String added in v0.6.5 

func (s DetachNetworkInterfaceInput) String() string

String returns the string representation

func (*DetachNetworkInterfaceInput) Validate added in v1.1.21 

func (s *DetachNetworkInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachNetworkInterfaceOutput 

type DetachNetworkInterfaceOutput struct {
	// contains filtered or unexported fields
}

func (DetachNetworkInterfaceOutput) GoString added in v0.6.5 

func (s DetachNetworkInterfaceOutput) GoString() string

GoString returns the string representation

func (DetachNetworkInterfaceOutput) String added in v0.6.5 

func (s DetachNetworkInterfaceOutput) String() string

String returns the string representation

type DetachVolumeInput 

type DetachVolumeInput struct {

	// The device name.
	Device *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Forces detachment if the previous detachment attempt did not occur cleanly
	// (for example, logging into an instance, unmounting the volume, and detaching
	// normally). This option can lead to data loss or a corrupted file system.
	// Use this option only as a last resort to detach a volume from a failed instance.
	// The instance won't have an opportunity to flush file system caches or file
	// system metadata. If you use this option, you must perform file system check
	// and repair procedures.
	Force *bool `type:"boolean"`

	// The ID of the instance.
	InstanceId *string `type:"string"`

	// The ID of the volume.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DetachVolume.

func (DetachVolumeInput) GoString added in v0.6.5 

func (s DetachVolumeInput) GoString() string

GoString returns the string representation

func (DetachVolumeInput) String added in v0.6.5 

func (s DetachVolumeInput) String() string

String returns the string representation

func (*DetachVolumeInput) Validate added in v1.1.21 

func (s *DetachVolumeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachVpnGatewayInput added in v0.9.5 

type DetachVpnGatewayInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `type:"string" required:"true"`

	// The ID of the virtual private gateway.
	VpnGatewayId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DetachVpnGateway.

func (DetachVpnGatewayInput) GoString added in v0.9.5 

func (s DetachVpnGatewayInput) GoString() string

GoString returns the string representation

func (DetachVpnGatewayInput) String added in v0.9.5 

func (s DetachVpnGatewayInput) String() string

String returns the string representation

func (*DetachVpnGatewayInput) Validate added in v1.1.21 

func (s *DetachVpnGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachVpnGatewayOutput added in v0.9.5 

type DetachVpnGatewayOutput struct {
	// contains filtered or unexported fields
}

func (DetachVpnGatewayOutput) GoString added in v0.9.5 

func (s DetachVpnGatewayOutput) GoString() string

GoString returns the string representation

func (DetachVpnGatewayOutput) String added in v0.9.5 

func (s DetachVpnGatewayOutput) String() string

String returns the string representation

type DhcpConfiguration added in v0.9.5 

type DhcpConfiguration struct {

	// The name of a DHCP option.
	Key *string `locationName:"key" type:"string"`

	// One or more values for the DHCP option.
	Values []*AttributeValue `locationName:"valueSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a DHCP configuration option.

func (DhcpConfiguration) GoString added in v0.9.5 

func (s DhcpConfiguration) GoString() string

GoString returns the string representation

func (DhcpConfiguration) String added in v0.9.5 

func (s DhcpConfiguration) String() string

String returns the string representation

type DhcpOptions added in v0.9.5 

type DhcpOptions struct {

	// One or more DHCP options in the set.
	DhcpConfigurations []*DhcpConfiguration `locationName:"dhcpConfigurationSet" locationNameList:"item" type:"list"`

	// The ID of the set of DHCP options.
	DhcpOptionsId *string `locationName:"dhcpOptionsId" type:"string"`

	// Any tags assigned to the DHCP options set.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a set of DHCP options.

func (DhcpOptions) GoString added in v0.9.5 

func (s DhcpOptions) GoString() string

GoString returns the string representation

func (DhcpOptions) String added in v0.9.5 

func (s DhcpOptions) String() string

String returns the string representation

type DisableVgwRoutePropagationInput added in v0.9.5 

type DisableVgwRoutePropagationInput struct {

	// The ID of the virtual private gateway.
	GatewayId *string `type:"string" required:"true"`

	// The ID of the route table.
	RouteTableId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DisableVgwRoutePropagation.

func (DisableVgwRoutePropagationInput) GoString added in v0.9.5 

func (s DisableVgwRoutePropagationInput) GoString() string

GoString returns the string representation

func (DisableVgwRoutePropagationInput) String added in v0.9.5 

func (s DisableVgwRoutePropagationInput) String() string

String returns the string representation

func (*DisableVgwRoutePropagationInput) Validate added in v1.1.21 

func (s *DisableVgwRoutePropagationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisableVgwRoutePropagationOutput added in v0.9.5 

type DisableVgwRoutePropagationOutput struct {
	// contains filtered or unexported fields
}

func (DisableVgwRoutePropagationOutput) GoString added in v0.9.5 

func (s DisableVgwRoutePropagationOutput) GoString() string

GoString returns the string representation

func (DisableVgwRoutePropagationOutput) String added in v0.9.5 

func (s DisableVgwRoutePropagationOutput) String() string

String returns the string representation

type DisableVpcClassicLinkDnsSupportInput added in v1.0.8 

type DisableVpcClassicLinkDnsSupportInput struct {

	// The ID of the VPC.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DisableVpcClassicLinkDnsSupport.

func (DisableVpcClassicLinkDnsSupportInput) GoString added in v1.0.8 

func (s DisableVpcClassicLinkDnsSupportInput) GoString() string

GoString returns the string representation

func (DisableVpcClassicLinkDnsSupportInput) String added in v1.0.8 

func (s DisableVpcClassicLinkDnsSupportInput) String() string

String returns the string representation

type DisableVpcClassicLinkDnsSupportOutput added in v1.0.8 

type DisableVpcClassicLinkDnsSupportOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of DisableVpcClassicLinkDnsSupport.

func (DisableVpcClassicLinkDnsSupportOutput) GoString added in v1.0.8 

func (s DisableVpcClassicLinkDnsSupportOutput) GoString() string

GoString returns the string representation

func (DisableVpcClassicLinkDnsSupportOutput) String added in v1.0.8 

func (s DisableVpcClassicLinkDnsSupportOutput) String() string

String returns the string representation

type DisableVpcClassicLinkInput added in v0.9.5 

type DisableVpcClassicLinkInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DisableVpcClassicLink.

func (DisableVpcClassicLinkInput) GoString added in v0.9.5 

func (s DisableVpcClassicLinkInput) GoString() string

GoString returns the string representation

func (DisableVpcClassicLinkInput) String added in v0.9.5 

func (s DisableVpcClassicLinkInput) String() string

String returns the string representation

func (*DisableVpcClassicLinkInput) Validate added in v1.1.21 

func (s *DisableVpcClassicLinkInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisableVpcClassicLinkOutput added in v0.9.5 

type DisableVpcClassicLinkOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of DisableVpcClassicLink.

func (DisableVpcClassicLinkOutput) GoString added in v0.9.5 

func (s DisableVpcClassicLinkOutput) GoString() string

GoString returns the string representation

func (DisableVpcClassicLinkOutput) String added in v0.9.5 

func (s DisableVpcClassicLinkOutput) String() string

String returns the string representation

type DisassociateAddressInput 

type DisassociateAddressInput struct {

	// [EC2-VPC] The association ID. Required for EC2-VPC.
	AssociationId *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// [EC2-Classic] The Elastic IP address. Required for EC2-Classic.
	PublicIp *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for DisassociateAddress.

func (DisassociateAddressInput) GoString added in v0.6.5 

func (s DisassociateAddressInput) GoString() string

GoString returns the string representation

func (DisassociateAddressInput) String added in v0.6.5 

func (s DisassociateAddressInput) String() string

String returns the string representation

type DisassociateAddressOutput 

type DisassociateAddressOutput struct {
	// contains filtered or unexported fields
}

func (DisassociateAddressOutput) GoString added in v0.6.5 

func (s DisassociateAddressOutput) GoString() string

GoString returns the string representation

func (DisassociateAddressOutput) String added in v0.6.5 

func (s DisassociateAddressOutput) String() string

String returns the string representation

type DisassociateRouteTableInput 

type DisassociateRouteTableInput struct {

	// The association ID representing the current association between the route
	// table and subnet.
	AssociationId *string `locationName:"associationId" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for DisassociateRouteTable.

func (DisassociateRouteTableInput) GoString added in v0.6.5 

func (s DisassociateRouteTableInput) GoString() string

GoString returns the string representation

func (DisassociateRouteTableInput) String added in v0.6.5 

func (s DisassociateRouteTableInput) String() string

String returns the string representation

func (*DisassociateRouteTableInput) Validate added in v1.1.21 

func (s *DisassociateRouteTableInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateRouteTableOutput 

type DisassociateRouteTableOutput struct {
	// contains filtered or unexported fields
}

func (DisassociateRouteTableOutput) GoString added in v0.6.5 

func (s DisassociateRouteTableOutput) GoString() string

GoString returns the string representation

func (DisassociateRouteTableOutput) String added in v0.6.5 

func (s DisassociateRouteTableOutput) String() string

String returns the string representation

type DiskImage 

type DiskImage struct {

	// A description of the disk image.
	Description *string `type:"string"`

	// Information about the disk image.
	Image *DiskImageDetail `type:"structure"`

	// Information about the volume.
	Volume *VolumeDetail `type:"structure"`
	// contains filtered or unexported fields
}

Describes a disk image.

func (DiskImage) GoString added in v0.6.5 

func (s DiskImage) GoString() string

GoString returns the string representation

func (DiskImage) String added in v0.6.5 

func (s DiskImage) String() string

String returns the string representation

func (*DiskImage) Validate added in v1.1.21 

func (s *DiskImage) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DiskImageDescription 

type DiskImageDescription struct {

	// The checksum computed for the disk image.
	Checksum *string `locationName:"checksum" type:"string"`

	// The disk image format.
	Format *string `locationName:"format" type:"string" required:"true" enum:"DiskImageFormat"`

	// A presigned URL for the import manifest stored in Amazon S3. For information
	// about creating a presigned URL for an Amazon S3 object, read the "Query String
	// Request Authentication Alternative" section of the Authenticating REST Requests
	// (http://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html)
	// topic in the Amazon Simple Storage Service Developer Guide.
	//
	// For information about the import manifest referenced by this API action,
	// see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html).
	ImportManifestUrl *string `locationName:"importManifestUrl" type:"string" required:"true"`

	// The size of the disk image, in GiB.
	Size *int64 `locationName:"size" type:"long" required:"true"`
	// contains filtered or unexported fields
}

Describes a disk image.

func (DiskImageDescription) GoString added in v0.6.5 

func (s DiskImageDescription) GoString() string

GoString returns the string representation

func (DiskImageDescription) String added in v0.6.5 

func (s DiskImageDescription) String() string

String returns the string representation

type DiskImageDetail 

type DiskImageDetail struct {

	// The size of the disk image, in GiB.
	Bytes *int64 `locationName:"bytes" type:"long" required:"true"`

	// The disk image format.
	Format *string `locationName:"format" type:"string" required:"true" enum:"DiskImageFormat"`

	// A presigned URL for the import manifest stored in Amazon S3 and presented
	// here as an Amazon S3 presigned URL. For information about creating a presigned
	// URL for an Amazon S3 object, read the "Query String Request Authentication
	// Alternative" section of the Authenticating REST Requests (http://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html)
	// topic in the Amazon Simple Storage Service Developer Guide.
	//
	// For information about the import manifest referenced by this API action,
	// see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html).
	ImportManifestUrl *string `locationName:"importManifestUrl" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a disk image.

func (DiskImageDetail) GoString added in v0.6.5 

func (s DiskImageDetail) GoString() string

GoString returns the string representation

func (DiskImageDetail) String added in v0.6.5 

func (s DiskImageDetail) String() string

String returns the string representation

func (*DiskImageDetail) Validate added in v1.1.21 

func (s *DiskImageDetail) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DiskImageVolumeDescription 

type DiskImageVolumeDescription struct {

	// The volume identifier.
	Id *string `locationName:"id" type:"string" required:"true"`

	// The size of the volume, in GiB.
	Size *int64 `locationName:"size" type:"long"`
	// contains filtered or unexported fields
}

Describes a disk image volume.

func (DiskImageVolumeDescription) GoString added in v0.6.5 

func (s DiskImageVolumeDescription) GoString() string

GoString returns the string representation

func (DiskImageVolumeDescription) String added in v0.6.5 

func (s DiskImageVolumeDescription) String() string

String returns the string representation

type EC2 

type EC2 struct {
	*client.Client
}

Amazon Elastic Compute Cloud (Amazon EC2) provides resizable computing capacity in the Amazon Web Services (AWS) cloud. Using Amazon EC2 eliminates your need to invest in hardware up front, so you can develop and deploy applications faster. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New 

func New(p client.ConfigProvider, cfgs ...*aws.Config) *EC2

New creates a new instance of the EC2 client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example: 

// Create a EC2 client from just a session.
svc := ec2.New(mySession)

// Create a EC2 client with additional configuration
svc := ec2.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*EC2) AcceptReservedInstancesExchangeQuote added in v1.4.15 

func (c *EC2) AcceptReservedInstancesExchangeQuote(input *AcceptReservedInstancesExchangeQuoteInput) (*AcceptReservedInstancesExchangeQuoteOutput, error)

Purchases Convertible Reserved Instance offerings described in the GetReservedInstancesExchangeQuote call.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AcceptReservedInstancesExchangeQuoteInput{
		ReservedInstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		TargetConfigurations: []*ec2.TargetConfigurationRequest{
			{ // Required
				OfferingId:    aws.String("String"), // Required
				InstanceCount: aws.Int64(1),
			},
			// More values...
		},
	}
	resp, err := svc.AcceptReservedInstancesExchangeQuote(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AcceptReservedInstancesExchangeQuoteRequest added in v1.4.15 

func (c *EC2) AcceptReservedInstancesExchangeQuoteRequest(input *AcceptReservedInstancesExchangeQuoteInput) (req *request.Request, output *AcceptReservedInstancesExchangeQuoteOutput)

AcceptReservedInstancesExchangeQuoteRequest generates a "aws/request.Request" representing the client's request for the AcceptReservedInstancesExchangeQuote operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AcceptReservedInstancesExchangeQuote method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AcceptReservedInstancesExchangeQuoteRequest method.
req, resp := client.AcceptReservedInstancesExchangeQuoteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AcceptVpcPeeringConnection added in v0.9.5 

func (c *EC2) AcceptVpcPeeringConnection(input *AcceptVpcPeeringConnectionInput) (*AcceptVpcPeeringConnectionOutput, error)

Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the pending-acceptance state, and you must be the owner of the peer VPC. Use the DescribeVpcPeeringConnections request to view your outstanding VPC peering connection requests.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AcceptVpcPeeringConnectionInput{
		DryRun:                 aws.Bool(true),
		VpcPeeringConnectionId: aws.String("String"),
	}
	resp, err := svc.AcceptVpcPeeringConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AcceptVpcPeeringConnectionRequest added in v0.9.5 

func (c *EC2) AcceptVpcPeeringConnectionRequest(input *AcceptVpcPeeringConnectionInput) (req *request.Request, output *AcceptVpcPeeringConnectionOutput)

AcceptVpcPeeringConnectionRequest generates a "aws/request.Request" representing the client's request for the AcceptVpcPeeringConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AcceptVpcPeeringConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AcceptVpcPeeringConnectionRequest method.
req, resp := client.AcceptVpcPeeringConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AllocateAddress 

func (c *EC2) AllocateAddress(input *AllocateAddressInput) (*AllocateAddressOutput, error)

Acquires an Elastic IP address.

An Elastic IP address is for use either in the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AllocateAddressInput{
		Domain: aws.String("DomainType"),
		DryRun: aws.Bool(true),
	}
	resp, err := svc.AllocateAddress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AllocateAddressRequest 

func (c *EC2) AllocateAddressRequest(input *AllocateAddressInput) (req *request.Request, output *AllocateAddressOutput)

AllocateAddressRequest generates a "aws/request.Request" representing the client's request for the AllocateAddress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocateAddress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AllocateAddressRequest method.
req, resp := client.AllocateAddressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AllocateHosts added in v1.0.1 

func (c *EC2) AllocateHosts(input *AllocateHostsInput) (*AllocateHostsOutput, error)

Allocates a Dedicated Host to your account. At minimum you need to specify the instance size type, Availability Zone, and quantity of hosts you want to allocate.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AllocateHostsInput{
		AvailabilityZone: aws.String("String"), // Required
		InstanceType:     aws.String("String"), // Required
		Quantity:         aws.Int64(1),         // Required
		AutoPlacement:    aws.String("AutoPlacement"),
		ClientToken:      aws.String("String"),
	}
	resp, err := svc.AllocateHosts(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AllocateHostsRequest added in v1.0.1 

func (c *EC2) AllocateHostsRequest(input *AllocateHostsInput) (req *request.Request, output *AllocateHostsOutput)

AllocateHostsRequest generates a "aws/request.Request" representing the client's request for the AllocateHosts operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocateHosts method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AllocateHostsRequest method.
req, resp := client.AllocateHostsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AssignPrivateIpAddresses added in v0.9.5 

func (c *EC2) AssignPrivateIpAddresses(input *AssignPrivateIpAddressesInput) (*AssignPrivateIpAddressesOutput, error)

Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html) in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) in the Amazon Elastic Compute Cloud User Guide.

AssignPrivateIpAddresses is available only in EC2-VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AssignPrivateIpAddressesInput{
		NetworkInterfaceId: aws.String("String"), // Required
		AllowReassignment:  aws.Bool(true),
		PrivateIpAddresses: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SecondaryPrivateIpAddressCount: aws.Int64(1),
	}
	resp, err := svc.AssignPrivateIpAddresses(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AssignPrivateIpAddressesRequest added in v0.9.5 

func (c *EC2) AssignPrivateIpAddressesRequest(input *AssignPrivateIpAddressesInput) (req *request.Request, output *AssignPrivateIpAddressesOutput)

AssignPrivateIpAddressesRequest generates a "aws/request.Request" representing the client's request for the AssignPrivateIpAddresses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssignPrivateIpAddresses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AssignPrivateIpAddressesRequest method.
req, resp := client.AssignPrivateIpAddressesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AssociateAddress 

func (c *EC2) AssociateAddress(input *AssociateAddressInput) (*AssociateAddressOutput, error)

Associates an Elastic IP address with an instance or a network interface.

An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) in the Amazon Elastic Compute Cloud User Guide.

[EC2-Classic, VPC in an EC2-VPC-only account] If the Elastic IP address is already associated with a different instance, it is disassociated from that instance and associated with the specified instance.

[VPC in an EC2-Classic account] If you don't specify a private IP address, the Elastic IP address is associated with the primary IP address. If the Elastic IP address is already associated with a different instance or a network interface, you get an error unless you allow reassociation. 

This is an idempotent operation. If you perform the operation more than

once, Amazon EC2 doesn't return an error, and you may be charged for each time the Elastic IP address is remapped to the same instance. For more information, see the Elastic IP Addresses section of Amazon EC2 Pricing (http://aws.amazon.com/ec2/pricing/).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AssociateAddressInput{
		AllocationId:       aws.String("String"),
		AllowReassociation: aws.Bool(true),
		DryRun:             aws.Bool(true),
		InstanceId:         aws.String("String"),
		NetworkInterfaceId: aws.String("String"),
		PrivateIpAddress:   aws.String("String"),
		PublicIp:           aws.String("String"),
	}
	resp, err := svc.AssociateAddress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AssociateAddressRequest 

func (c *EC2) AssociateAddressRequest(input *AssociateAddressInput) (req *request.Request, output *AssociateAddressOutput)

AssociateAddressRequest generates a "aws/request.Request" representing the client's request for the AssociateAddress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateAddress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AssociateAddressRequest method.
req, resp := client.AssociateAddressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AssociateDhcpOptions added in v0.9.5 

func (c *EC2) AssociateDhcpOptions(input *AssociateDhcpOptionsInput) (*AssociateDhcpOptionsOutput, error)

Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC.

After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance.

For more information, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AssociateDhcpOptionsInput{
		DhcpOptionsId: aws.String("String"), // Required
		VpcId:         aws.String("String"), // Required
		DryRun:        aws.Bool(true),
	}
	resp, err := svc.AssociateDhcpOptions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AssociateDhcpOptionsRequest added in v0.9.5 

func (c *EC2) AssociateDhcpOptionsRequest(input *AssociateDhcpOptionsInput) (req *request.Request, output *AssociateDhcpOptionsOutput)

AssociateDhcpOptionsRequest generates a "aws/request.Request" representing the client's request for the AssociateDhcpOptions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateDhcpOptions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AssociateDhcpOptionsRequest method.
req, resp := client.AssociateDhcpOptionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AssociateRouteTable 

func (c *EC2) AssociateRouteTable(input *AssociateRouteTableInput) (*AssociateRouteTableOutput, error)

Associates a subnet with a route table. The subnet and route table must be in the same VPC. This association causes traffic originating from the subnet to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table from the subnet later. A route table can be associated with multiple subnets.

For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AssociateRouteTableInput{
		RouteTableId: aws.String("String"), // Required
		SubnetId:     aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.AssociateRouteTable(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AssociateRouteTableRequest 

func (c *EC2) AssociateRouteTableRequest(input *AssociateRouteTableInput) (req *request.Request, output *AssociateRouteTableOutput)

AssociateRouteTableRequest generates a "aws/request.Request" representing the client's request for the AssociateRouteTable operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateRouteTable method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AssociateRouteTableRequest method.
req, resp := client.AssociateRouteTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AttachClassicLinkVpc added in v0.9.5 

func (c *EC2) AttachClassicLinkVpc(input *AttachClassicLinkVpcInput) (*AttachClassicLinkVpcOutput, error)

Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC's security groups. You cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the running state. An instance is automatically unlinked from a VPC when it's stopped - you can link it to the VPC again when you restart it.

After you've linked an instance, you cannot change the VPC security groups that are associated with it. To change the security groups, you must first unlink the instance, and then link it again.

Linking your instance to a VPC is sometimes referred to as attaching your instance.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AttachClassicLinkVpcInput{
		Groups: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		InstanceId: aws.String("String"), // Required
		VpcId:      aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.AttachClassicLinkVpc(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AttachClassicLinkVpcRequest added in v0.9.5 

func (c *EC2) AttachClassicLinkVpcRequest(input *AttachClassicLinkVpcInput) (req *request.Request, output *AttachClassicLinkVpcOutput)

AttachClassicLinkVpcRequest generates a "aws/request.Request" representing the client's request for the AttachClassicLinkVpc operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachClassicLinkVpc method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AttachClassicLinkVpcRequest method.
req, resp := client.AttachClassicLinkVpcRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AttachInternetGateway 

func (c *EC2) AttachInternetGateway(input *AttachInternetGatewayInput) (*AttachInternetGatewayOutput, error)

Attaches an Internet gateway to a VPC, enabling connectivity between the Internet and the VPC. For more information about your VPC and Internet gateway, see the Amazon Virtual Private Cloud User Guide (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AttachInternetGatewayInput{
		InternetGatewayId: aws.String("String"), // Required
		VpcId:             aws.String("String"), // Required
		DryRun:            aws.Bool(true),
	}
	resp, err := svc.AttachInternetGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AttachInternetGatewayRequest 

func (c *EC2) AttachInternetGatewayRequest(input *AttachInternetGatewayInput) (req *request.Request, output *AttachInternetGatewayOutput)

AttachInternetGatewayRequest generates a "aws/request.Request" representing the client's request for the AttachInternetGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachInternetGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AttachInternetGatewayRequest method.
req, resp := client.AttachInternetGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AttachNetworkInterface 

func (c *EC2) AttachNetworkInterface(input *AttachNetworkInterfaceInput) (*AttachNetworkInterfaceOutput, error)

Attaches a network interface to an instance.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AttachNetworkInterfaceInput{
		DeviceIndex:        aws.Int64(1),         // Required
		InstanceId:         aws.String("String"), // Required
		NetworkInterfaceId: aws.String("String"), // Required
		DryRun:             aws.Bool(true),
	}
	resp, err := svc.AttachNetworkInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AttachNetworkInterfaceRequest 

func (c *EC2) AttachNetworkInterfaceRequest(input *AttachNetworkInterfaceInput) (req *request.Request, output *AttachNetworkInterfaceOutput)

AttachNetworkInterfaceRequest generates a "aws/request.Request" representing the client's request for the AttachNetworkInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachNetworkInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AttachNetworkInterfaceRequest method.
req, resp := client.AttachNetworkInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AttachVolume 

func (c *EC2) AttachVolume(input *AttachVolumeInput) (*VolumeAttachment, error)

Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.

Encrypted EBS volumes may only be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) in the Amazon Elastic Compute Cloud User Guide.

For a list of supported device names, see Attaching an EBS Volume to an Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html). Any device names that aren't reserved for instance store volumes can be used for EBS volumes. For more information, see Amazon EC2 Instance Store (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/InstanceStorage.html) in the Amazon Elastic Compute Cloud User Guide.

If a volume has an AWS Marketplace product code: 

The volume can be attached only to a stopped instance.

AWS Marketplace product codes are copied from the volume to the instance.

You must be subscribed to the product.

The instance type and operating system of the instance must support the

product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance. 

For an overview of the AWS Marketplace, see Introducing AWS Marketplace

(https://aws.amazon.com/marketplace/help/200900000).

For more information about EBS volumes, see Attaching Amazon EBS Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-attaching-volume.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AttachVolumeInput{
		Device:     aws.String("String"), // Required
		InstanceId: aws.String("String"), // Required
		VolumeId:   aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.AttachVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AttachVolumeRequest 

func (c *EC2) AttachVolumeRequest(input *AttachVolumeInput) (req *request.Request, output *VolumeAttachment)

AttachVolumeRequest generates a "aws/request.Request" representing the client's request for the AttachVolume operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachVolume method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AttachVolumeRequest method.
req, resp := client.AttachVolumeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AttachVpnGateway added in v0.9.5 

func (c *EC2) AttachVpnGateway(input *AttachVpnGatewayInput) (*AttachVpnGatewayOutput, error)

Attaches a virtual private gateway to a VPC. For more information, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AttachVpnGatewayInput{
		VpcId:        aws.String("String"), // Required
		VpnGatewayId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.AttachVpnGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AttachVpnGatewayRequest added in v0.9.5 

func (c *EC2) AttachVpnGatewayRequest(input *AttachVpnGatewayInput) (req *request.Request, output *AttachVpnGatewayOutput)

AttachVpnGatewayRequest generates a "aws/request.Request" representing the client's request for the AttachVpnGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AttachVpnGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AttachVpnGatewayRequest method.
req, resp := client.AttachVpnGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AuthorizeSecurityGroupEgress 

func (c *EC2) AuthorizeSecurityGroupEgress(input *AuthorizeSecurityGroupEgressInput) (*AuthorizeSecurityGroupEgressOutput, error)

[EC2-VPC only] Adds one or more egress rules to a security group for use with a VPC. Specifically, this action permits instances to send traffic to one or more destination CIDR IP address ranges, or to one or more destination security groups for the same VPC. This action doesn't apply to security groups for use in EC2-Classic. For more information, see Security Groups for Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) in the Amazon Virtual Private Cloud User Guide. 

You can have up to 50 rules per security group (covering both ingress and

egress rules). 

Each rule consists of the protocol (for example, TCP), plus either a CIDR

range or a source group. For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code. You can use -1 for the type or code to mean all types or all codes.

Rule changes are propagated to affected instances as quickly as possible. However, a small delay might occur.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AuthorizeSecurityGroupEgressInput{
		GroupId:  aws.String("String"), // Required
		CidrIp:   aws.String("String"),
		DryRun:   aws.Bool(true),
		FromPort: aws.Int64(1),
		IpPermissions: []*ec2.IpPermission{
			{ // Required
				FromPort:   aws.Int64(1),
				IpProtocol: aws.String("String"),
				IpRanges: []*ec2.IpRange{
					{ // Required
						CidrIp: aws.String("String"),
					},
					// More values...
				},
				PrefixListIds: []*ec2.PrefixListId{
					{ // Required
						PrefixListId: aws.String("String"),
					},
					// More values...
				},
				ToPort: aws.Int64(1),
				UserIdGroupPairs: []*ec2.UserIdGroupPair{
					{ // Required
						GroupId:                aws.String("String"),
						GroupName:              aws.String("String"),
						PeeringStatus:          aws.String("String"),
						UserId:                 aws.String("String"),
						VpcId:                  aws.String("String"),
						VpcPeeringConnectionId: aws.String("String"),
					},
					// More values...
				},
			},
			// More values...
		},
		IpProtocol:                 aws.String("String"),
		SourceSecurityGroupName:    aws.String("String"),
		SourceSecurityGroupOwnerId: aws.String("String"),
		ToPort:                     aws.Int64(1),
	}
	resp, err := svc.AuthorizeSecurityGroupEgress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AuthorizeSecurityGroupEgressRequest 

func (c *EC2) AuthorizeSecurityGroupEgressRequest(input *AuthorizeSecurityGroupEgressInput) (req *request.Request, output *AuthorizeSecurityGroupEgressOutput)

AuthorizeSecurityGroupEgressRequest generates a "aws/request.Request" representing the client's request for the AuthorizeSecurityGroupEgress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AuthorizeSecurityGroupEgress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AuthorizeSecurityGroupEgressRequest method.
req, resp := client.AuthorizeSecurityGroupEgressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) AuthorizeSecurityGroupIngress 

func (c *EC2) AuthorizeSecurityGroupIngress(input *AuthorizeSecurityGroupIngressInput) (*AuthorizeSecurityGroupIngressOutput, error)

Adds one or more ingress rules to a security group. 

EC2-Classic: You can have up to 100 rules per group.

EC2-VPC: You can have up to 50 rules per group (covering both ingress and egress rules). 

Rule changes are propagated to instances within the security group as quickly

as possible. However, a small delay might occur.

[EC2-Classic] This action gives one or more CIDR IP address ranges permission to access a security group in your account, or gives one or more security groups (called the source groups) permission to access a security group for your account. A source group can be for your own AWS account, or another.

[EC2-VPC] This action gives one or more CIDR IP address ranges permission to access a security group in your VPC, or gives one or more other security groups (called the source groups) permission to access a security group for your VPC. The security groups must all be for the same VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.AuthorizeSecurityGroupIngressInput{
		CidrIp:    aws.String("String"),
		DryRun:    aws.Bool(true),
		FromPort:  aws.Int64(1),
		GroupId:   aws.String("String"),
		GroupName: aws.String("String"),
		IpPermissions: []*ec2.IpPermission{
			{ // Required
				FromPort:   aws.Int64(1),
				IpProtocol: aws.String("String"),
				IpRanges: []*ec2.IpRange{
					{ // Required
						CidrIp: aws.String("String"),
					},
					// More values...
				},
				PrefixListIds: []*ec2.PrefixListId{
					{ // Required
						PrefixListId: aws.String("String"),
					},
					// More values...
				},
				ToPort: aws.Int64(1),
				UserIdGroupPairs: []*ec2.UserIdGroupPair{
					{ // Required
						GroupId:                aws.String("String"),
						GroupName:              aws.String("String"),
						PeeringStatus:          aws.String("String"),
						UserId:                 aws.String("String"),
						VpcId:                  aws.String("String"),
						VpcPeeringConnectionId: aws.String("String"),
					},
					// More values...
				},
			},
			// More values...
		},
		IpProtocol:                 aws.String("String"),
		SourceSecurityGroupName:    aws.String("String"),
		SourceSecurityGroupOwnerId: aws.String("String"),
		ToPort:                     aws.Int64(1),
	}
	resp, err := svc.AuthorizeSecurityGroupIngress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) AuthorizeSecurityGroupIngressRequest 

func (c *EC2) AuthorizeSecurityGroupIngressRequest(input *AuthorizeSecurityGroupIngressInput) (req *request.Request, output *AuthorizeSecurityGroupIngressOutput)

AuthorizeSecurityGroupIngressRequest generates a "aws/request.Request" representing the client's request for the AuthorizeSecurityGroupIngress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AuthorizeSecurityGroupIngress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AuthorizeSecurityGroupIngressRequest method.
req, resp := client.AuthorizeSecurityGroupIngressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) BundleInstance 

func (c *EC2) BundleInstance(input *BundleInstanceInput) (*BundleInstanceOutput, error)

Bundles an Amazon instance store-backed Windows instance.

During bundling, only the root device volume (C:\) is bundled. Data on other instance store volumes is not preserved. 

This action is not applicable for Linux/Unix instances or Windows instances

that are backed by Amazon EBS. 

For more information, see Creating an Instance Store-Backed Windows AMI

(http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/Creating_InstanceStoreBacked_WinAMI.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.BundleInstanceInput{
		InstanceId: aws.String("String"), // Required
		Storage: &ec2.Storage{ // Required
			S3: &ec2.S3Storage{
				AWSAccessKeyId:        aws.String("String"),
				Bucket:                aws.String("String"),
				Prefix:                aws.String("String"),
				UploadPolicy:          []byte("PAYLOAD"),
				UploadPolicySignature: aws.String("String"),
			},
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.BundleInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) BundleInstanceRequest 

func (c *EC2) BundleInstanceRequest(input *BundleInstanceInput) (req *request.Request, output *BundleInstanceOutput)

BundleInstanceRequest generates a "aws/request.Request" representing the client's request for the BundleInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BundleInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the BundleInstanceRequest method.
req, resp := client.BundleInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelBundleTask 

func (c *EC2) CancelBundleTask(input *CancelBundleTaskInput) (*CancelBundleTaskOutput, error)

Cancels a bundling operation for an instance store-backed Windows instance.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelBundleTaskInput{
		BundleId: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.CancelBundleTask(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelBundleTaskRequest 

func (c *EC2) CancelBundleTaskRequest(input *CancelBundleTaskInput) (req *request.Request, output *CancelBundleTaskOutput)

CancelBundleTaskRequest generates a "aws/request.Request" representing the client's request for the CancelBundleTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelBundleTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelBundleTaskRequest method.
req, resp := client.CancelBundleTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelConversionTask 

func (c *EC2) CancelConversionTask(input *CancelConversionTaskInput) (*CancelConversionTaskOutput, error)

Cancels an active conversion task. The task can be the import of an instance or volume. The action removes all artifacts of the conversion, including a partially uploaded volume or instance. If the conversion is complete or is in the process of transferring the final disk image, the command fails and returns an exception.

For more information, see Importing a Virtual Machine Using the Amazon EC2 CLI (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelConversionTaskInput{
		ConversionTaskId: aws.String("String"), // Required
		DryRun:           aws.Bool(true),
		ReasonMessage:    aws.String("String"),
	}
	resp, err := svc.CancelConversionTask(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelConversionTaskRequest 

func (c *EC2) CancelConversionTaskRequest(input *CancelConversionTaskInput) (req *request.Request, output *CancelConversionTaskOutput)

CancelConversionTaskRequest generates a "aws/request.Request" representing the client's request for the CancelConversionTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelConversionTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelConversionTaskRequest method.
req, resp := client.CancelConversionTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelExportTask 

func (c *EC2) CancelExportTask(input *CancelExportTaskInput) (*CancelExportTaskOutput, error)

Cancels an active export task. The request removes all artifacts of the export, including any partially-created Amazon S3 objects. If the export task is complete or is in the process of transferring the final disk image, the command fails and returns an error.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelExportTaskInput{
		ExportTaskId: aws.String("String"), // Required
	}
	resp, err := svc.CancelExportTask(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelExportTaskRequest 

func (c *EC2) CancelExportTaskRequest(input *CancelExportTaskInput) (req *request.Request, output *CancelExportTaskOutput)

CancelExportTaskRequest generates a "aws/request.Request" representing the client's request for the CancelExportTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelExportTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelExportTaskRequest method.
req, resp := client.CancelExportTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelImportTask 

func (c *EC2) CancelImportTask(input *CancelImportTaskInput) (*CancelImportTaskOutput, error)

Cancels an in-process import virtual machine or import snapshot task.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelImportTaskInput{
		CancelReason: aws.String("String"),
		DryRun:       aws.Bool(true),
		ImportTaskId: aws.String("String"),
	}
	resp, err := svc.CancelImportTask(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelImportTaskRequest 

func (c *EC2) CancelImportTaskRequest(input *CancelImportTaskInput) (req *request.Request, output *CancelImportTaskOutput)

CancelImportTaskRequest generates a "aws/request.Request" representing the client's request for the CancelImportTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelImportTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelImportTaskRequest method.
req, resp := client.CancelImportTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelReservedInstancesListing 

func (c *EC2) CancelReservedInstancesListing(input *CancelReservedInstancesListingInput) (*CancelReservedInstancesListingOutput, error)

Cancels the specified Reserved Instance listing in the Reserved Instance Marketplace.

For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelReservedInstancesListingInput{
		ReservedInstancesListingId: aws.String("String"), // Required
	}
	resp, err := svc.CancelReservedInstancesListing(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelReservedInstancesListingRequest 

func (c *EC2) CancelReservedInstancesListingRequest(input *CancelReservedInstancesListingInput) (req *request.Request, output *CancelReservedInstancesListingOutput)

CancelReservedInstancesListingRequest generates a "aws/request.Request" representing the client's request for the CancelReservedInstancesListing operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelReservedInstancesListing method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelReservedInstancesListingRequest method.
req, resp := client.CancelReservedInstancesListingRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelSpotFleetRequests 

func (c *EC2) CancelSpotFleetRequests(input *CancelSpotFleetRequestsInput) (*CancelSpotFleetRequestsOutput, error)

Cancels the specified Spot fleet requests.

After you cancel a Spot fleet request, the Spot fleet launches no new Spot instances. You must specify whether the Spot fleet should also terminate its Spot instances. If you terminate the instances, the Spot fleet request enters the cancelled_terminating state. Otherwise, the Spot fleet request enters the cancelled_running state and the instances continue to run until they are interrupted or you terminate them manually.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelSpotFleetRequestsInput{
		SpotFleetRequestIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		TerminateInstances: aws.Bool(true), // Required
		DryRun:             aws.Bool(true),
	}
	resp, err := svc.CancelSpotFleetRequests(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelSpotFleetRequestsRequest 

func (c *EC2) CancelSpotFleetRequestsRequest(input *CancelSpotFleetRequestsInput) (req *request.Request, output *CancelSpotFleetRequestsOutput)

CancelSpotFleetRequestsRequest generates a "aws/request.Request" representing the client's request for the CancelSpotFleetRequests operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelSpotFleetRequests method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelSpotFleetRequestsRequest method.
req, resp := client.CancelSpotFleetRequestsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CancelSpotInstanceRequests 

func (c *EC2) CancelSpotInstanceRequests(input *CancelSpotInstanceRequestsInput) (*CancelSpotInstanceRequestsOutput, error)

Cancels one or more Spot instance requests. Spot instances are instances that Amazon EC2 starts on your behalf when the bid price that you specify exceeds the current Spot price. Amazon EC2 periodically sets the Spot price based on available Spot instance capacity and current Spot instance requests. For more information, see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) in the Amazon Elastic Compute Cloud User Guide. 

Canceling a Spot instance request does not terminate running Spot instances

associated with the request.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CancelSpotInstanceRequestsInput{
		SpotInstanceRequestIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CancelSpotInstanceRequests(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CancelSpotInstanceRequestsRequest 

func (c *EC2) CancelSpotInstanceRequestsRequest(input *CancelSpotInstanceRequestsInput) (req *request.Request, output *CancelSpotInstanceRequestsOutput)

CancelSpotInstanceRequestsRequest generates a "aws/request.Request" representing the client's request for the CancelSpotInstanceRequests operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CancelSpotInstanceRequests method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CancelSpotInstanceRequestsRequest method.
req, resp := client.CancelSpotInstanceRequestsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ConfirmProductInstance 

func (c *EC2) ConfirmProductInstance(input *ConfirmProductInstanceInput) (*ConfirmProductInstanceOutput, error)

Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner needs to verify whether another user's instance is eligible for support.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ConfirmProductInstanceInput{
		InstanceId:  aws.String("String"), // Required
		ProductCode: aws.String("String"), // Required
		DryRun:      aws.Bool(true),
	}
	resp, err := svc.ConfirmProductInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ConfirmProductInstanceRequest 

func (c *EC2) ConfirmProductInstanceRequest(input *ConfirmProductInstanceInput) (req *request.Request, output *ConfirmProductInstanceOutput)

ConfirmProductInstanceRequest generates a "aws/request.Request" representing the client's request for the ConfirmProductInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ConfirmProductInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ConfirmProductInstanceRequest method.
req, resp := client.ConfirmProductInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CopyImage 

func (c *EC2) CopyImage(input *CopyImageInput) (*CopyImageOutput, error)

Initiates the copy of an AMI from the specified source region to the current region. You specify the destination region by using its endpoint when making the request.

For more information, see Copying AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/CopyingAMIs.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CopyImageInput{
		Name:          aws.String("String"), // Required
		SourceImageId: aws.String("String"), // Required
		SourceRegion:  aws.String("String"), // Required
		ClientToken:   aws.String("String"),
		Description:   aws.String("String"),
		DryRun:        aws.Bool(true),
		Encrypted:     aws.Bool(true),
		KmsKeyId:      aws.String("String"),
	}
	resp, err := svc.CopyImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CopyImageRequest 

func (c *EC2) CopyImageRequest(input *CopyImageInput) (req *request.Request, output *CopyImageOutput)

CopyImageRequest generates a "aws/request.Request" representing the client's request for the CopyImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CopyImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CopyImageRequest method.
req, resp := client.CopyImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CopySnapshot 

func (c *EC2) CopySnapshot(input *CopySnapshotInput) (*CopySnapshotOutput, error)

Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy the snapshot within the same region or from one region to another. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). The snapshot is copied to the regional endpoint that you send the HTTP request to.

Copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless the Encrypted flag is specified during the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a non-default CMK with the KmsKeyId parameter. 

To copy an encrypted snapshot that has been shared from another account,

you must have permissions for the CMK used to encrypt the snapshot. 

Snapshots created by the CopySnapshot action have an arbitrary volume

ID that should not be used for any purpose. 

For more information, see Copying an Amazon EBS Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-copy-snapshot.html)

in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CopySnapshotInput{
		SourceRegion:      aws.String("String"), // Required
		SourceSnapshotId:  aws.String("String"), // Required
		Description:       aws.String("String"),
		DestinationRegion: aws.String("String"),
		DryRun:            aws.Bool(true),
		Encrypted:         aws.Bool(true),
		KmsKeyId:          aws.String("String"),
		PresignedUrl:      aws.String("String"),
	}
	resp, err := svc.CopySnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CopySnapshotRequest 

func (c *EC2) CopySnapshotRequest(input *CopySnapshotInput) (req *request.Request, output *CopySnapshotOutput)

CopySnapshotRequest generates a "aws/request.Request" representing the client's request for the CopySnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CopySnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CopySnapshotRequest method.
req, resp := client.CopySnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateCustomerGateway 

func (c *EC2) CreateCustomerGateway(input *CreateCustomerGatewayInput) (*CreateCustomerGatewayOutput, error)

Provides information to AWS about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the AWS side of the VPN connection is the virtual private gateway.) You must provide the Internet-routable IP address of the customer gateway's external interface. The IP address must be static and may be behind a device performing network address translation (NAT).

For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range). 

Amazon EC2 supports all 2-byte ASN numbers in the range of 1 - 65534, with

the exception of 7224, which is reserved in the us-east-1 region, and 9059, which is reserved in the eu-west-1 region. 

For more information about VPN customer gateways, see Adding a Hardware

Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide. 

You cannot create more than one customer gateway with the same VPN type,

IP address, and BGP ASN parameter values. If you run an identical request more than one time, the first request creates the customer gateway, and subsequent requests return information about the existing customer gateway. The subsequent requests do not create new customer gateway resources.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateCustomerGatewayInput{
		BgpAsn:   aws.Int64(1),              // Required
		PublicIp: aws.String("String"),      // Required
		Type:     aws.String("GatewayType"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.CreateCustomerGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateCustomerGatewayRequest 

func (c *EC2) CreateCustomerGatewayRequest(input *CreateCustomerGatewayInput) (req *request.Request, output *CreateCustomerGatewayOutput)

CreateCustomerGatewayRequest generates a "aws/request.Request" representing the client's request for the CreateCustomerGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCustomerGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateCustomerGatewayRequest method.
req, resp := client.CreateCustomerGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateDhcpOptions added in v0.9.5 

func (c *EC2) CreateDhcpOptions(input *CreateDhcpOptionsInput) (*CreateDhcpOptionsOutput, error)

Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132 (http://www.ietf.org/rfc/rfc2132.txt). 

domain-name-servers - The IP addresses of up to four domain name servers,

or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. If you want your instance to receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server. 

domain-name - If you're using AmazonProvidedDNS in "us-east-1", specify

"ec2.internal". If you're using AmazonProvidedDNS in another region, specify "region.compute.internal" (for example, "ap-northeast-1.compute.internal"). Otherwise, specify a domain name (for example, "MyCompany.com"). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name. 

ntp-servers - The IP addresses of up to four Network Time Protocol (NTP)

servers. 

netbios-name-servers - The IP addresses of up to four NetBIOS name servers.

netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend

that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132 (http://www.ietf.org/rfc/rfc2132.txt). 

Your VPC automatically starts out with a set of DHCP options that includes

only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an Internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information about DHCP options, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateDhcpOptionsInput{
		DhcpConfigurations: []*ec2.NewDhcpConfiguration{ // Required
			{ // Required
				Key: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CreateDhcpOptions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateDhcpOptionsRequest added in v0.9.5 

func (c *EC2) CreateDhcpOptionsRequest(input *CreateDhcpOptionsInput) (req *request.Request, output *CreateDhcpOptionsOutput)

CreateDhcpOptionsRequest generates a "aws/request.Request" representing the client's request for the CreateDhcpOptions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateDhcpOptions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateDhcpOptionsRequest method.
req, resp := client.CreateDhcpOptionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateFlowLogs added in v0.6.2 

func (c *EC2) CreateFlowLogs(input *CreateFlowLogsInput) (*CreateFlowLogsOutput, error)

Creates one or more flow logs to capture IP traffic for a specific network interface, subnet, or VPC. Flow logs are delivered to a specified log group in Amazon CloudWatch Logs. If you specify a VPC or subnet in the request, a log stream is created in CloudWatch Logs for each network interface in the subnet or VPC. Log streams can include information about accepted and rejected traffic to a network interface. You can view the data in your log streams using Amazon CloudWatch Logs.

In your request, you must also specify an IAM role that has permission to publish logs to CloudWatch Logs.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateFlowLogsInput{
		DeliverLogsPermissionArn: aws.String("String"), // Required
		LogGroupName:             aws.String("String"), // Required
		ResourceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		ResourceType: aws.String("FlowLogsResourceType"), // Required
		TrafficType:  aws.String("TrafficType"),          // Required
		ClientToken:  aws.String("String"),
	}
	resp, err := svc.CreateFlowLogs(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateFlowLogsRequest added in v0.6.2 

func (c *EC2) CreateFlowLogsRequest(input *CreateFlowLogsInput) (req *request.Request, output *CreateFlowLogsOutput)

CreateFlowLogsRequest generates a "aws/request.Request" representing the client's request for the CreateFlowLogs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateFlowLogs method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateFlowLogsRequest method.
req, resp := client.CreateFlowLogsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateImage 

func (c *EC2) CreateImage(input *CreateImageInput) (*CreateImageOutput, error)

Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped.

If you customized your instance with instance store volumes or EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes.

For more information, see Creating Amazon EBS-Backed Linux AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateImageInput{
		InstanceId: aws.String("String"), // Required
		Name:       aws.String("String"), // Required
		BlockDeviceMappings: []*ec2.BlockDeviceMapping{
			{ // Required
				DeviceName: aws.String("String"),
				Ebs: &ec2.EbsBlockDevice{
					DeleteOnTermination: aws.Bool(true),
					Encrypted:           aws.Bool(true),
					Iops:                aws.Int64(1),
					SnapshotId:          aws.String("String"),
					VolumeSize:          aws.Int64(1),
					VolumeType:          aws.String("VolumeType"),
				},
				NoDevice:    aws.String("String"),
				VirtualName: aws.String("String"),
			},
			// More values...
		},
		Description: aws.String("String"),
		DryRun:      aws.Bool(true),
		NoReboot:    aws.Bool(true),
	}
	resp, err := svc.CreateImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateImageRequest 

func (c *EC2) CreateImageRequest(input *CreateImageInput) (req *request.Request, output *CreateImageOutput)

CreateImageRequest generates a "aws/request.Request" representing the client's request for the CreateImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateImageRequest method.
req, resp := client.CreateImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateInstanceExportTask 

func (c *EC2) CreateInstanceExportTask(input *CreateInstanceExportTaskInput) (*CreateInstanceExportTaskOutput, error)

Exports a running or stopped instance to an S3 bucket.

For information about the supported operating systems, image formats, and known limitations for the types of instances you can export, see Exporting an Instance as a VM Using VM Import/Export (http://docs.aws.amazon.com/vm-import/latest/userguide/vmexport.html) in the VM Import/Export User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateInstanceExportTaskInput{
		InstanceId:  aws.String("String"), // Required
		Description: aws.String("String"),
		ExportToS3Task: &ec2.ExportToS3TaskSpecification{
			ContainerFormat: aws.String("ContainerFormat"),
			DiskImageFormat: aws.String("DiskImageFormat"),
			S3Bucket:        aws.String("String"),
			S3Prefix:        aws.String("String"),
		},
		TargetEnvironment: aws.String("ExportEnvironment"),
	}
	resp, err := svc.CreateInstanceExportTask(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateInstanceExportTaskRequest 

func (c *EC2) CreateInstanceExportTaskRequest(input *CreateInstanceExportTaskInput) (req *request.Request, output *CreateInstanceExportTaskOutput)

CreateInstanceExportTaskRequest generates a "aws/request.Request" representing the client's request for the CreateInstanceExportTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateInstanceExportTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateInstanceExportTaskRequest method.
req, resp := client.CreateInstanceExportTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateInternetGateway 

func (c *EC2) CreateInternetGateway(input *CreateInternetGatewayInput) (*CreateInternetGatewayOutput, error)

Creates an Internet gateway for use with a VPC. After creating the Internet gateway, you attach it to a VPC using AttachInternetGateway.

For more information about your VPC and Internet gateway, see the Amazon Virtual Private Cloud User Guide (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateInternetGatewayInput{
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CreateInternetGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateInternetGatewayRequest 

func (c *EC2) CreateInternetGatewayRequest(input *CreateInternetGatewayInput) (req *request.Request, output *CreateInternetGatewayOutput)

CreateInternetGatewayRequest generates a "aws/request.Request" representing the client's request for the CreateInternetGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateInternetGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateInternetGatewayRequest method.
req, resp := client.CreateInternetGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateKeyPair 

func (c *EC2) CreateKeyPair(input *CreateKeyPairInput) (*CreateKeyPairOutput, error)

Creates a 2048-bit RSA key pair with the specified name. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#8 private key. If a key with the specified name already exists, Amazon EC2 returns an error.

You can have up to five thousand key pairs per region.

The key pair returned to you is available only in the region in which you create it. To create a key pair that is available in all regions, use ImportKeyPair.

For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateKeyPairInput{
		KeyName: aws.String("String"), // Required
		DryRun:  aws.Bool(true),
	}
	resp, err := svc.CreateKeyPair(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateKeyPairRequest 

func (c *EC2) CreateKeyPairRequest(input *CreateKeyPairInput) (req *request.Request, output *CreateKeyPairOutput)

CreateKeyPairRequest generates a "aws/request.Request" representing the client's request for the CreateKeyPair operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateKeyPair method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateKeyPairRequest method.
req, resp := client.CreateKeyPairRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateNatGateway added in v1.0.6 

func (c *EC2) CreateNatGateway(input *CreateNatGatewayInput) (*CreateNatGatewayOutput, error)

Creates a NAT gateway in the specified subnet. A NAT gateway can be used to enable instances in a private subnet to connect to the Internet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. For more information, see NAT Gateways (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateNatGatewayInput{
		AllocationId: aws.String("String"), // Required
		SubnetId:     aws.String("String"), // Required
		ClientToken:  aws.String("String"),
	}
	resp, err := svc.CreateNatGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateNatGatewayRequest added in v1.0.6 

func (c *EC2) CreateNatGatewayRequest(input *CreateNatGatewayInput) (req *request.Request, output *CreateNatGatewayOutput)

CreateNatGatewayRequest generates a "aws/request.Request" representing the client's request for the CreateNatGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateNatGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateNatGatewayRequest method.
req, resp := client.CreateNatGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateNetworkAcl added in v0.9.5 

func (c *EC2) CreateNetworkAcl(input *CreateNetworkAclInput) (*CreateNetworkAclOutput, error)

Creates a network ACL in a VPC. Network ACLs provide an optional layer of security (in addition to security groups) for the instances in your VPC.

For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateNetworkAclInput{
		VpcId:  aws.String("String"), // Required
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CreateNetworkAcl(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateNetworkAclEntry added in v0.9.5 

func (c *EC2) CreateNetworkAclEntry(input *CreateNetworkAclEntryInput) (*CreateNetworkAclEntryOutput, error)

Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the ACL, we process the entries in the ACL according to the rule numbers, in ascending order. Each network ACL has a set of ingress rules and a separate set of egress rules.

We recommend that you leave room between the rule numbers (for example, 100, 110, 120, ...), and not number them one right after the other (for example, 101, 102, 103, ...). This makes it easier to add a rule between existing ones without having to renumber the rules.

After you add an entry, you can't modify it; you must either replace it, or create an entry and delete the old one.

For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateNetworkAclEntryInput{
		CidrBlock:    aws.String("String"),     // Required
		Egress:       aws.Bool(true),           // Required
		NetworkAclId: aws.String("String"),     // Required
		Protocol:     aws.String("String"),     // Required
		RuleAction:   aws.String("RuleAction"), // Required
		RuleNumber:   aws.Int64(1),             // Required
		DryRun:       aws.Bool(true),
		IcmpTypeCode: &ec2.IcmpTypeCode{
			Code: aws.Int64(1),
			Type: aws.Int64(1),
		},
		PortRange: &ec2.PortRange{
			From: aws.Int64(1),
			To:   aws.Int64(1),
		},
	}
	resp, err := svc.CreateNetworkAclEntry(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateNetworkAclEntryRequest added in v0.9.5 

func (c *EC2) CreateNetworkAclEntryRequest(input *CreateNetworkAclEntryInput) (req *request.Request, output *CreateNetworkAclEntryOutput)

CreateNetworkAclEntryRequest generates a "aws/request.Request" representing the client's request for the CreateNetworkAclEntry operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateNetworkAclEntry method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateNetworkAclEntryRequest method.
req, resp := client.CreateNetworkAclEntryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateNetworkAclRequest added in v0.9.5 

func (c *EC2) CreateNetworkAclRequest(input *CreateNetworkAclInput) (req *request.Request, output *CreateNetworkAclOutput)

CreateNetworkAclRequest generates a "aws/request.Request" representing the client's request for the CreateNetworkAcl operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateNetworkAcl method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateNetworkAclRequest method.
req, resp := client.CreateNetworkAclRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateNetworkInterface 

func (c *EC2) CreateNetworkInterface(input *CreateNetworkInterfaceInput) (*CreateNetworkInterfaceOutput, error)

Creates a network interface in the specified subnet.

For more information about network interfaces, see Elastic Network Interfaces (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateNetworkInterfaceInput{
		SubnetId:    aws.String("String"), // Required
		Description: aws.String("String"),
		DryRun:      aws.Bool(true),
		Groups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		PrivateIpAddress: aws.String("String"),
		PrivateIpAddresses: []*ec2.PrivateIpAddressSpecification{
			{ // Required
				PrivateIpAddress: aws.String("String"), // Required
				Primary:          aws.Bool(true),
			},
			// More values...
		},
		SecondaryPrivateIpAddressCount: aws.Int64(1),
	}
	resp, err := svc.CreateNetworkInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateNetworkInterfaceRequest 

func (c *EC2) CreateNetworkInterfaceRequest(input *CreateNetworkInterfaceInput) (req *request.Request, output *CreateNetworkInterfaceOutput)

CreateNetworkInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreateNetworkInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateNetworkInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateNetworkInterfaceRequest method.
req, resp := client.CreateNetworkInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreatePlacementGroup 

func (c *EC2) CreatePlacementGroup(input *CreatePlacementGroupInput) (*CreatePlacementGroupOutput, error)

Creates a placement group that you launch cluster instances into. You must give the group a name that's unique within the scope of your account.

For more information about placement groups and cluster instances, see Cluster Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreatePlacementGroupInput{
		GroupName: aws.String("String"),            // Required
		Strategy:  aws.String("PlacementStrategy"), // Required
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.CreatePlacementGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreatePlacementGroupRequest 

func (c *EC2) CreatePlacementGroupRequest(input *CreatePlacementGroupInput) (req *request.Request, output *CreatePlacementGroupOutput)

CreatePlacementGroupRequest generates a "aws/request.Request" representing the client's request for the CreatePlacementGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreatePlacementGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreatePlacementGroupRequest method.
req, resp := client.CreatePlacementGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateReservedInstancesListing 

func (c *EC2) CreateReservedInstancesListing(input *CreateReservedInstancesListingInput) (*CreateReservedInstancesListingOutput, error)

Creates a listing for Amazon EC2 Standard Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Standard Reserved Instance listing at a time. To get a list of your Standard Reserved Instances, you can use the DescribeReservedInstances operation.

The Reserved Instance Marketplace matches sellers who want to resell Standard Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.

To sell your Standard Reserved Instances, you must first register as a seller in the Reserved Instance Marketplace. After completing the registration process, you can create a Reserved Instance Marketplace listing of some or all of your Standard Reserved Instances, and specify the upfront price to receive for them. Your Standard Reserved Instance listings then become available for purchase. To view the details of your Standard Reserved Instance listing, you can use the DescribeReservedInstancesListings operation.

For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateReservedInstancesListingInput{
		ClientToken:   aws.String("String"), // Required
		InstanceCount: aws.Int64(1),         // Required
		PriceSchedules: []*ec2.PriceScheduleSpecification{ // Required
			{ // Required
				CurrencyCode: aws.String("CurrencyCodeValues"),
				Price:        aws.Float64(1.0),
				Term:         aws.Int64(1),
			},
			// More values...
		},
		ReservedInstancesId: aws.String("String"), // Required
	}
	resp, err := svc.CreateReservedInstancesListing(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateReservedInstancesListingRequest 

func (c *EC2) CreateReservedInstancesListingRequest(input *CreateReservedInstancesListingInput) (req *request.Request, output *CreateReservedInstancesListingOutput)

CreateReservedInstancesListingRequest generates a "aws/request.Request" representing the client's request for the CreateReservedInstancesListing operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateReservedInstancesListing method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateReservedInstancesListingRequest method.
req, resp := client.CreateReservedInstancesListingRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateRoute 

func (c *EC2) CreateRoute(input *CreateRouteInput) (*CreateRouteOutput, error)

Creates a route in a route table within a VPC.

You must specify one of the following targets: Internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, or network interface.

When determining how to route traffic, we use the route with the most specific match. For example, let's say the traffic is destined for 192.0.2.3, and the route table includes the following two routes: 

 192.0.2.0/24 (goes to some target A)

 192.0.2.0/28 (goes to some target B)

Both routes apply to the traffic destined for 192.0.2.3. However, the

second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic.

For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateRouteInput{
		DestinationCidrBlock:   aws.String("String"), // Required
		RouteTableId:           aws.String("String"), // Required
		DryRun:                 aws.Bool(true),
		GatewayId:              aws.String("String"),
		InstanceId:             aws.String("String"),
		NatGatewayId:           aws.String("String"),
		NetworkInterfaceId:     aws.String("String"),
		VpcPeeringConnectionId: aws.String("String"),
	}
	resp, err := svc.CreateRoute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateRouteRequest 

func (c *EC2) CreateRouteRequest(input *CreateRouteInput) (req *request.Request, output *CreateRouteOutput)

CreateRouteRequest generates a "aws/request.Request" representing the client's request for the CreateRoute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRoute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateRouteRequest method.
req, resp := client.CreateRouteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateRouteTable 

func (c *EC2) CreateRouteTable(input *CreateRouteTableInput) (*CreateRouteTableOutput, error)

Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet.

For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateRouteTableInput{
		VpcId:  aws.String("String"), // Required
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CreateRouteTable(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateRouteTableRequest 

func (c *EC2) CreateRouteTableRequest(input *CreateRouteTableInput) (req *request.Request, output *CreateRouteTableOutput)

CreateRouteTableRequest generates a "aws/request.Request" representing the client's request for the CreateRouteTable operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRouteTable method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateRouteTableRequest method.
req, resp := client.CreateRouteTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateSecurityGroup 

func (c *EC2) CreateSecurityGroup(input *CreateSecurityGroupInput) (*CreateSecurityGroupOutput, error)

Creates a security group.

A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 Security Groups (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) in the Amazon Virtual Private Cloud User Guide. 

EC2-Classic: You can have up to 500 security groups.

EC2-VPC: You can create up to 500 security groups per VPC. 

When you create a security group, you specify a friendly name of your choice.

You can have a security group for use in EC2-Classic with the same name as a security group for use in a VPC. However, you can't have two security groups for use in EC2-Classic with the same name or two security groups for use in a VPC with the same name.

You have a default security group for use in EC2-Classic and a default security group for use in your VPC. If you don't specify a security group when you launch an instance, the instance is launched into the appropriate default security group. A default security group includes a default rule that grants instances unrestricted network access to each other.

You can add or remove rules from your security groups using AuthorizeSecurityGroupIngress, AuthorizeSecurityGroupEgress, RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateSecurityGroupInput{
		Description: aws.String("String"), // Required
		GroupName:   aws.String("String"), // Required
		DryRun:      aws.Bool(true),
		VpcId:       aws.String("String"),
	}
	resp, err := svc.CreateSecurityGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateSecurityGroupRequest 

func (c *EC2) CreateSecurityGroupRequest(input *CreateSecurityGroupInput) (req *request.Request, output *CreateSecurityGroupOutput)

CreateSecurityGroupRequest generates a "aws/request.Request" representing the client's request for the CreateSecurityGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSecurityGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateSecurityGroupRequest method.
req, resp := client.CreateSecurityGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateSnapshot 

func (c *EC2) CreateSnapshot(input *CreateSnapshotInput) (*Snapshot, error)

Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance.

When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot.

You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your EBS volume at the time the snapshot command is issued; this may exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending.

To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot.

Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected.

For more information, see Amazon Elastic Block Store (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AmazonEBS.html) and Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateSnapshotInput{
		VolumeId:    aws.String("String"), // Required
		Description: aws.String("String"),
		DryRun:      aws.Bool(true),
	}
	resp, err := svc.CreateSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateSnapshotRequest 

func (c *EC2) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Request, output *Snapshot)

CreateSnapshotRequest generates a "aws/request.Request" representing the client's request for the CreateSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateSnapshotRequest method.
req, resp := client.CreateSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateSpotDatafeedSubscription 

func (c *EC2) CreateSpotDatafeedSubscription(input *CreateSpotDatafeedSubscriptionInput) (*CreateSpotDatafeedSubscriptionOutput, error)

Creates a data feed for Spot instances, enabling you to view Spot instance usage logs. You can create one data feed per AWS account. For more information, see Spot Instance Data Feed (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateSpotDatafeedSubscriptionInput{
		Bucket: aws.String("String"), // Required
		DryRun: aws.Bool(true),
		Prefix: aws.String("String"),
	}
	resp, err := svc.CreateSpotDatafeedSubscription(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateSpotDatafeedSubscriptionRequest 

func (c *EC2) CreateSpotDatafeedSubscriptionRequest(input *CreateSpotDatafeedSubscriptionInput) (req *request.Request, output *CreateSpotDatafeedSubscriptionOutput)

CreateSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the client's request for the CreateSpotDatafeedSubscription operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSpotDatafeedSubscription method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateSpotDatafeedSubscriptionRequest method.
req, resp := client.CreateSpotDatafeedSubscriptionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateSubnet 

func (c *EC2) CreateSubnet(input *CreateSubnetInput) (*CreateSubnetOutput, error)

Creates a subnet in an existing VPC.

When you create each subnet, you provide the VPC ID and the CIDR block you want for the subnet. After you create a subnet, you can't change its CIDR block. The subnet's CIDR block can be the same as the VPC's CIDR block (assuming you want only a single subnet in the VPC), or a subset of the VPC's CIDR block. If you create more than one subnet in a VPC, the subnets' CIDR blocks must not overlap. The smallest subnet (and VPC) you can create uses a /28 netmask (16 IP addresses), and the largest uses a /16 netmask (65,536 IP addresses). 

AWS reserves both the first four and the last IP address in each subnet's

CIDR block. They're not available for use. 

If you add more than one subnet to a VPC, they're set up in a star topology

with a logical router in the middle.

If you launch an instance in a VPC using an Amazon EBS-backed AMI, the IP address doesn't change if you stop and restart the instance (unlike a similar instance launched outside a VPC, which gets a new IP address when restarted). It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available.

For more information about subnets, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateSubnetInput{
		CidrBlock:        aws.String("String"), // Required
		VpcId:            aws.String("String"), // Required
		AvailabilityZone: aws.String("String"),
		DryRun:           aws.Bool(true),
	}
	resp, err := svc.CreateSubnet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateSubnetRequest 

func (c *EC2) CreateSubnetRequest(input *CreateSubnetInput) (req *request.Request, output *CreateSubnetOutput)

CreateSubnetRequest generates a "aws/request.Request" representing the client's request for the CreateSubnet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateSubnet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateSubnetRequest method.
req, resp := client.CreateSubnetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateTags 

func (c *EC2) CreateTags(input *CreateTagsInput) (*CreateTagsOutput, error)

Adds or overwrites one or more tags for the specified Amazon EC2 resource or resources. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource.

For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) in the Amazon Elastic Compute Cloud User Guide. For more information about creating IAM policies that control users' access to resources based on tags, see Supported Resource-Level Permissions for Amazon EC2 API Actions (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-iam-actions-resources.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateTagsInput{
		Resources: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		Tags: []*ec2.Tag{ // Required
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.CreateTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateTagsRequest 

func (c *EC2) CreateTagsRequest(input *CreateTagsInput) (req *request.Request, output *CreateTagsOutput)

CreateTagsRequest generates a "aws/request.Request" representing the client's request for the CreateTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTagsRequest method.
req, resp := client.CreateTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVolume 

func (c *EC2) CreateVolume(input *CreateVolumeInput) (*Volume, error)

Creates an EBS volume that can be attached to an instance in the same Availability Zone. The volume is created in the regional endpoint that you send the HTTP request to. For more information see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html).

You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume.

You can create encrypted volumes with the Encrypted parameter. Encrypted volumes may only be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS Encryption (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSEncryption.html) in the Amazon Elastic Compute Cloud User Guide.

For more information, see Creating or Restoring an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-creating-volume.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVolumeInput{
		AvailabilityZone: aws.String("String"), // Required
		DryRun:           aws.Bool(true),
		Encrypted:        aws.Bool(true),
		Iops:             aws.Int64(1),
		KmsKeyId:         aws.String("String"),
		Size:             aws.Int64(1),
		SnapshotId:       aws.String("String"),
		VolumeType:       aws.String("VolumeType"),
	}
	resp, err := svc.CreateVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVolumeRequest 

func (c *EC2) CreateVolumeRequest(input *CreateVolumeInput) (req *request.Request, output *Volume)

CreateVolumeRequest generates a "aws/request.Request" representing the client's request for the CreateVolume operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVolume method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVolumeRequest method.
req, resp := client.CreateVolumeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpc added in v0.9.5 

func (c *EC2) CreateVpc(input *CreateVpcInput) (*CreateVpcOutput, error)

Creates a VPC with the specified CIDR block.

The smallest VPC you can create uses a /28 netmask (16 IP addresses), and the largest uses a /16 netmask (65,536 IP addresses). To help you decide how big to make your VPC, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) in the Amazon Virtual Private Cloud User Guide.

By default, each instance you launch in the VPC has the default DHCP options, which includes only a default DNS server that we provide (AmazonProvidedDNS). For more information about DHCP options, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) in the Amazon Virtual Private Cloud User Guide.

You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/dedicated-instance.html.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpcInput{
		CidrBlock:       aws.String("String"), // Required
		DryRun:          aws.Bool(true),
		InstanceTenancy: aws.String("Tenancy"),
	}
	resp, err := svc.CreateVpc(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpcEndpoint added in v0.9.5 

func (c *EC2) CreateVpcEndpoint(input *CreateVpcEndpointInput) (*CreateVpcEndpointOutput, error)

Creates a VPC endpoint for a specified AWS service. An endpoint enables you to create a private connection between your VPC and another AWS service in your account. You can specify an endpoint policy to attach to the endpoint that will control access to the service from your VPC. You can also specify the VPC route tables that use the endpoint.

Currently, only endpoints to Amazon S3 are supported.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpcEndpointInput{
		ServiceName:    aws.String("String"), // Required
		VpcId:          aws.String("String"), // Required
		ClientToken:    aws.String("String"),
		DryRun:         aws.Bool(true),
		PolicyDocument: aws.String("String"),
		RouteTableIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.CreateVpcEndpoint(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpcEndpointRequest added in v0.9.5 

func (c *EC2) CreateVpcEndpointRequest(input *CreateVpcEndpointInput) (req *request.Request, output *CreateVpcEndpointOutput)

CreateVpcEndpointRequest generates a "aws/request.Request" representing the client's request for the CreateVpcEndpoint operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpcEndpoint method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpcEndpointRequest method.
req, resp := client.CreateVpcEndpointRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpcPeeringConnection added in v0.9.5 

func (c *EC2) CreateVpcPeeringConnection(input *CreateVpcPeeringConnectionInput) (*CreateVpcPeeringConnectionOutput, error)

Requests a VPC peering connection between two VPCs: a requester VPC that you own and a peer VPC with which to create the connection. The peer VPC can belong to another AWS account. The requester VPC and peer VPC cannot have overlapping CIDR blocks.

The owner of the peer VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected.

A CreateVpcPeeringConnection request between VPCs with overlapping CIDR blocks results in the VPC peering connection having a status of failed.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpcPeeringConnectionInput{
		DryRun:      aws.Bool(true),
		PeerOwnerId: aws.String("String"),
		PeerVpcId:   aws.String("String"),
		VpcId:       aws.String("String"),
	}
	resp, err := svc.CreateVpcPeeringConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpcPeeringConnectionRequest added in v0.9.5 

func (c *EC2) CreateVpcPeeringConnectionRequest(input *CreateVpcPeeringConnectionInput) (req *request.Request, output *CreateVpcPeeringConnectionOutput)

CreateVpcPeeringConnectionRequest generates a "aws/request.Request" representing the client's request for the CreateVpcPeeringConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpcPeeringConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpcPeeringConnectionRequest method.
req, resp := client.CreateVpcPeeringConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpcRequest added in v0.9.5 

func (c *EC2) CreateVpcRequest(input *CreateVpcInput) (req *request.Request, output *CreateVpcOutput)

CreateVpcRequest generates a "aws/request.Request" representing the client's request for the CreateVpc operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpc method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpcRequest method.
req, resp := client.CreateVpcRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpnConnection added in v0.9.5 

func (c *EC2) CreateVpnConnection(input *CreateVpnConnectionInput) (*CreateVpnConnectionOutput, error)

Creates a VPN connection between an existing virtual private gateway and a VPN customer gateway. The only supported connection type is ipsec.1.

The response includes information that you need to give to your network administrator to configure your customer gateway. 

We strongly recommend that you use HTTPS when calling this operation because

the response contains sensitive cryptographic information for configuring your customer gateway. 

If you decide to shut down your VPN connection for any reason and later

create a new VPN connection, you must reconfigure your customer gateway with the new information returned from this call.

This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error.

For more information about VPN connections, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpnConnectionInput{
		CustomerGatewayId: aws.String("String"), // Required
		Type:              aws.String("String"), // Required
		VpnGatewayId:      aws.String("String"), // Required
		DryRun:            aws.Bool(true),
		Options: &ec2.VpnConnectionOptionsSpecification{
			StaticRoutesOnly: aws.Bool(true),
		},
	}
	resp, err := svc.CreateVpnConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpnConnectionRequest added in v0.9.5 

func (c *EC2) CreateVpnConnectionRequest(input *CreateVpnConnectionInput) (req *request.Request, output *CreateVpnConnectionOutput)

CreateVpnConnectionRequest generates a "aws/request.Request" representing the client's request for the CreateVpnConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpnConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpnConnectionRequest method.
req, resp := client.CreateVpnConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpnConnectionRoute added in v0.9.5 

func (c *EC2) CreateVpnConnectionRoute(input *CreateVpnConnectionRouteInput) (*CreateVpnConnectionRouteOutput, error)

Creates a static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.

For more information about VPN connections, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpnConnectionRouteInput{
		DestinationCidrBlock: aws.String("String"), // Required
		VpnConnectionId:      aws.String("String"), // Required
	}
	resp, err := svc.CreateVpnConnectionRoute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpnConnectionRouteRequest added in v0.9.5 

func (c *EC2) CreateVpnConnectionRouteRequest(input *CreateVpnConnectionRouteInput) (req *request.Request, output *CreateVpnConnectionRouteOutput)

CreateVpnConnectionRouteRequest generates a "aws/request.Request" representing the client's request for the CreateVpnConnectionRoute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpnConnectionRoute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpnConnectionRouteRequest method.
req, resp := client.CreateVpnConnectionRouteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) CreateVpnGateway added in v0.9.5 

func (c *EC2) CreateVpnGateway(input *CreateVpnGatewayInput) (*CreateVpnGatewayOutput, error)

Creates a virtual private gateway. A virtual private gateway is the endpoint on the VPC side of your VPN connection. You can create a virtual private gateway before creating the VPC itself.

For more information about virtual private gateways, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.CreateVpnGatewayInput{
		Type:             aws.String("GatewayType"), // Required
		AvailabilityZone: aws.String("String"),
		DryRun:           aws.Bool(true),
	}
	resp, err := svc.CreateVpnGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) CreateVpnGatewayRequest added in v0.9.5 

func (c *EC2) CreateVpnGatewayRequest(input *CreateVpnGatewayInput) (req *request.Request, output *CreateVpnGatewayOutput)

CreateVpnGatewayRequest generates a "aws/request.Request" representing the client's request for the CreateVpnGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateVpnGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateVpnGatewayRequest method.
req, resp := client.CreateVpnGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteCustomerGateway 

func (c *EC2) DeleteCustomerGateway(input *DeleteCustomerGatewayInput) (*DeleteCustomerGatewayOutput, error)

Deletes the specified customer gateway. You must delete the VPN connection before you can delete the customer gateway.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteCustomerGatewayInput{
		CustomerGatewayId: aws.String("String"), // Required
		DryRun:            aws.Bool(true),
	}
	resp, err := svc.DeleteCustomerGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteCustomerGatewayRequest 

func (c *EC2) DeleteCustomerGatewayRequest(input *DeleteCustomerGatewayInput) (req *request.Request, output *DeleteCustomerGatewayOutput)

DeleteCustomerGatewayRequest generates a "aws/request.Request" representing the client's request for the DeleteCustomerGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteCustomerGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteCustomerGatewayRequest method.
req, resp := client.DeleteCustomerGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteDhcpOptions added in v0.9.5 

func (c *EC2) DeleteDhcpOptions(input *DeleteDhcpOptionsInput) (*DeleteDhcpOptionsOutput, error)

Deletes the specified set of DHCP options. You must disassociate the set of DHCP options before you can delete it. You can disassociate the set of DHCP options by associating either a new set of options or the default set of options with the VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteDhcpOptionsInput{
		DhcpOptionsId: aws.String("String"), // Required
		DryRun:        aws.Bool(true),
	}
	resp, err := svc.DeleteDhcpOptions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteDhcpOptionsRequest added in v0.9.5 

func (c *EC2) DeleteDhcpOptionsRequest(input *DeleteDhcpOptionsInput) (req *request.Request, output *DeleteDhcpOptionsOutput)

DeleteDhcpOptionsRequest generates a "aws/request.Request" representing the client's request for the DeleteDhcpOptions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteDhcpOptions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteDhcpOptionsRequest method.
req, resp := client.DeleteDhcpOptionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteFlowLogs added in v0.6.2 

func (c *EC2) DeleteFlowLogs(input *DeleteFlowLogsInput) (*DeleteFlowLogsOutput, error)

Deletes one or more flow logs.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteFlowLogsInput{
		FlowLogIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DeleteFlowLogs(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteFlowLogsRequest added in v0.6.2 

func (c *EC2) DeleteFlowLogsRequest(input *DeleteFlowLogsInput) (req *request.Request, output *DeleteFlowLogsOutput)

DeleteFlowLogsRequest generates a "aws/request.Request" representing the client's request for the DeleteFlowLogs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteFlowLogs method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteFlowLogsRequest method.
req, resp := client.DeleteFlowLogsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteInternetGateway 

func (c *EC2) DeleteInternetGateway(input *DeleteInternetGatewayInput) (*DeleteInternetGatewayOutput, error)

Deletes the specified Internet gateway. You must detach the Internet gateway from the VPC before you can delete it.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteInternetGatewayInput{
		InternetGatewayId: aws.String("String"), // Required
		DryRun:            aws.Bool(true),
	}
	resp, err := svc.DeleteInternetGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteInternetGatewayRequest 

func (c *EC2) DeleteInternetGatewayRequest(input *DeleteInternetGatewayInput) (req *request.Request, output *DeleteInternetGatewayOutput)

DeleteInternetGatewayRequest generates a "aws/request.Request" representing the client's request for the DeleteInternetGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteInternetGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteInternetGatewayRequest method.
req, resp := client.DeleteInternetGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteKeyPair 

func (c *EC2) DeleteKeyPair(input *DeleteKeyPairInput) (*DeleteKeyPairOutput, error)

Deletes the specified key pair, by removing the public key from Amazon EC2.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteKeyPairInput{
		KeyName: aws.String("String"), // Required
		DryRun:  aws.Bool(true),
	}
	resp, err := svc.DeleteKeyPair(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteKeyPairRequest 

func (c *EC2) DeleteKeyPairRequest(input *DeleteKeyPairInput) (req *request.Request, output *DeleteKeyPairOutput)

DeleteKeyPairRequest generates a "aws/request.Request" representing the client's request for the DeleteKeyPair operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteKeyPair method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteKeyPairRequest method.
req, resp := client.DeleteKeyPairRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteNatGateway added in v1.0.6 

func (c *EC2) DeleteNatGateway(input *DeleteNatGatewayInput) (*DeleteNatGatewayOutput, error)

Deletes the specified NAT gateway. Deleting a NAT gateway disassociates its Elastic IP address, but does not release the address from your account. Deleting a NAT gateway does not delete any NAT gateway routes in your route tables.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteNatGatewayInput{
		NatGatewayId: aws.String("String"), // Required
	}
	resp, err := svc.DeleteNatGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteNatGatewayRequest added in v1.0.6 

func (c *EC2) DeleteNatGatewayRequest(input *DeleteNatGatewayInput) (req *request.Request, output *DeleteNatGatewayOutput)

DeleteNatGatewayRequest generates a "aws/request.Request" representing the client's request for the DeleteNatGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteNatGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteNatGatewayRequest method.
req, resp := client.DeleteNatGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteNetworkAcl added in v0.9.5 

func (c *EC2) DeleteNetworkAcl(input *DeleteNetworkAclInput) (*DeleteNetworkAclOutput, error)

Deletes the specified network ACL. You can't delete the ACL if it's associated with any subnets. You can't delete the default network ACL.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteNetworkAclInput{
		NetworkAclId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.DeleteNetworkAcl(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteNetworkAclEntry added in v0.9.5 

func (c *EC2) DeleteNetworkAclEntry(input *DeleteNetworkAclEntryInput) (*DeleteNetworkAclEntryOutput, error)

Deletes the specified ingress or egress entry (rule) from the specified network ACL.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteNetworkAclEntryInput{
		Egress:       aws.Bool(true),       // Required
		NetworkAclId: aws.String("String"), // Required
		RuleNumber:   aws.Int64(1),         // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.DeleteNetworkAclEntry(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteNetworkAclEntryRequest added in v0.9.5 

func (c *EC2) DeleteNetworkAclEntryRequest(input *DeleteNetworkAclEntryInput) (req *request.Request, output *DeleteNetworkAclEntryOutput)

DeleteNetworkAclEntryRequest generates a "aws/request.Request" representing the client's request for the DeleteNetworkAclEntry operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteNetworkAclEntry method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteNetworkAclEntryRequest method.
req, resp := client.DeleteNetworkAclEntryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteNetworkAclRequest added in v0.9.5 

func (c *EC2) DeleteNetworkAclRequest(input *DeleteNetworkAclInput) (req *request.Request, output *DeleteNetworkAclOutput)

DeleteNetworkAclRequest generates a "aws/request.Request" representing the client's request for the DeleteNetworkAcl operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteNetworkAcl method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteNetworkAclRequest method.
req, resp := client.DeleteNetworkAclRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteNetworkInterface 

func (c *EC2) DeleteNetworkInterface(input *DeleteNetworkInterfaceInput) (*DeleteNetworkInterfaceOutput, error)

Deletes the specified network interface. You must detach the network interface before you can delete it.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteNetworkInterfaceInput{
		NetworkInterfaceId: aws.String("String"), // Required
		DryRun:             aws.Bool(true),
	}
	resp, err := svc.DeleteNetworkInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteNetworkInterfaceRequest 

func (c *EC2) DeleteNetworkInterfaceRequest(input *DeleteNetworkInterfaceInput) (req *request.Request, output *DeleteNetworkInterfaceOutput)

DeleteNetworkInterfaceRequest generates a "aws/request.Request" representing the client's request for the DeleteNetworkInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteNetworkInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteNetworkInterfaceRequest method.
req, resp := client.DeleteNetworkInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeletePlacementGroup 

func (c *EC2) DeletePlacementGroup(input *DeletePlacementGroupInput) (*DeletePlacementGroupOutput, error)

Deletes the specified placement group. You must terminate all instances in the placement group before you can delete the placement group. For more information about placement groups and cluster instances, see Cluster Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeletePlacementGroupInput{
		GroupName: aws.String("String"), // Required
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.DeletePlacementGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeletePlacementGroupRequest 

func (c *EC2) DeletePlacementGroupRequest(input *DeletePlacementGroupInput) (req *request.Request, output *DeletePlacementGroupOutput)

DeletePlacementGroupRequest generates a "aws/request.Request" representing the client's request for the DeletePlacementGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeletePlacementGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeletePlacementGroupRequest method.
req, resp := client.DeletePlacementGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteRoute 

func (c *EC2) DeleteRoute(input *DeleteRouteInput) (*DeleteRouteOutput, error)

Deletes the specified route from the specified route table.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteRouteInput{
		DestinationCidrBlock: aws.String("String"), // Required
		RouteTableId:         aws.String("String"), // Required
		DryRun:               aws.Bool(true),
	}
	resp, err := svc.DeleteRoute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteRouteRequest 

func (c *EC2) DeleteRouteRequest(input *DeleteRouteInput) (req *request.Request, output *DeleteRouteOutput)

DeleteRouteRequest generates a "aws/request.Request" representing the client's request for the DeleteRoute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRoute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteRouteRequest method.
req, resp := client.DeleteRouteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteRouteTable 

func (c *EC2) DeleteRouteTable(input *DeleteRouteTableInput) (*DeleteRouteTableOutput, error)

Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteRouteTableInput{
		RouteTableId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.DeleteRouteTable(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteRouteTableRequest 

func (c *EC2) DeleteRouteTableRequest(input *DeleteRouteTableInput) (req *request.Request, output *DeleteRouteTableOutput)

DeleteRouteTableRequest generates a "aws/request.Request" representing the client's request for the DeleteRouteTable operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRouteTable method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteRouteTableRequest method.
req, resp := client.DeleteRouteTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteSecurityGroup 

func (c *EC2) DeleteSecurityGroup(input *DeleteSecurityGroupInput) (*DeleteSecurityGroupOutput, error)

Deletes a security group.

If you attempt to delete a security group that is associated with an instance, or is referenced by another security group, the operation fails with InvalidGroup.InUse in EC2-Classic or DependencyViolation in EC2-VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteSecurityGroupInput{
		DryRun:    aws.Bool(true),
		GroupId:   aws.String("String"),
		GroupName: aws.String("String"),
	}
	resp, err := svc.DeleteSecurityGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteSecurityGroupRequest 

func (c *EC2) DeleteSecurityGroupRequest(input *DeleteSecurityGroupInput) (req *request.Request, output *DeleteSecurityGroupOutput)

DeleteSecurityGroupRequest generates a "aws/request.Request" representing the client's request for the DeleteSecurityGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSecurityGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteSecurityGroupRequest method.
req, resp := client.DeleteSecurityGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteSnapshot 

func (c *EC2) DeleteSnapshot(input *DeleteSnapshotInput) (*DeleteSnapshotOutput, error)

Deletes the specified snapshot.

When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume.

You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot.

For more information, see Deleting an Amazon EBS Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-snapshot.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteSnapshotInput{
		SnapshotId: aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.DeleteSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteSnapshotRequest 

func (c *EC2) DeleteSnapshotRequest(input *DeleteSnapshotInput) (req *request.Request, output *DeleteSnapshotOutput)

DeleteSnapshotRequest generates a "aws/request.Request" representing the client's request for the DeleteSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteSnapshotRequest method.
req, resp := client.DeleteSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteSpotDatafeedSubscription 

func (c *EC2) DeleteSpotDatafeedSubscription(input *DeleteSpotDatafeedSubscriptionInput) (*DeleteSpotDatafeedSubscriptionOutput, error)

Deletes the data feed for Spot instances.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteSpotDatafeedSubscriptionInput{
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DeleteSpotDatafeedSubscription(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteSpotDatafeedSubscriptionRequest 

func (c *EC2) DeleteSpotDatafeedSubscriptionRequest(input *DeleteSpotDatafeedSubscriptionInput) (req *request.Request, output *DeleteSpotDatafeedSubscriptionOutput)

DeleteSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the client's request for the DeleteSpotDatafeedSubscription operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSpotDatafeedSubscription method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteSpotDatafeedSubscriptionRequest method.
req, resp := client.DeleteSpotDatafeedSubscriptionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteSubnet 

func (c *EC2) DeleteSubnet(input *DeleteSubnetInput) (*DeleteSubnetOutput, error)

Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteSubnetInput{
		SubnetId: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.DeleteSubnet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteSubnetRequest 

func (c *EC2) DeleteSubnetRequest(input *DeleteSubnetInput) (req *request.Request, output *DeleteSubnetOutput)

DeleteSubnetRequest generates a "aws/request.Request" representing the client's request for the DeleteSubnet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteSubnet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteSubnetRequest method.
req, resp := client.DeleteSubnetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteTags 

func (c *EC2) DeleteTags(input *DeleteTagsInput) (*DeleteTagsOutput, error)

Deletes the specified set of tags from the specified set of resources. This call is designed to follow a DescribeTags request.

For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteTagsInput{
		Resources: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Tags: []*ec2.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.DeleteTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteTagsRequest 

func (c *EC2) DeleteTagsRequest(input *DeleteTagsInput) (req *request.Request, output *DeleteTagsOutput)

DeleteTagsRequest generates a "aws/request.Request" representing the client's request for the DeleteTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteTagsRequest method.
req, resp := client.DeleteTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVolume 

func (c *EC2) DeleteVolume(input *DeleteVolumeInput) (*DeleteVolumeOutput, error)

Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). 

The volume may remain in the deleting state for several minutes.

For more information, see Deleting an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-deleting-volume.html)

in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVolumeInput{
		VolumeId: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.DeleteVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVolumeRequest 

func (c *EC2) DeleteVolumeRequest(input *DeleteVolumeInput) (req *request.Request, output *DeleteVolumeOutput)

DeleteVolumeRequest generates a "aws/request.Request" representing the client's request for the DeleteVolume operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVolume method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVolumeRequest method.
req, resp := client.DeleteVolumeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpc added in v0.9.5 

func (c *EC2) DeleteVpc(input *DeleteVpcInput) (*DeleteVpcOutput, error)

Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route tables associated with the VPC (except the default one), and so on.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpcInput{
		VpcId:  aws.String("String"), // Required
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DeleteVpc(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpcEndpoints added in v0.9.5 

func (c *EC2) DeleteVpcEndpoints(input *DeleteVpcEndpointsInput) (*DeleteVpcEndpointsOutput, error)

Deletes one or more specified VPC endpoints. Deleting the endpoint also deletes the endpoint routes in the route tables that were associated with the endpoint.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpcEndpointsInput{
		VpcEndpointIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DeleteVpcEndpoints(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpcEndpointsRequest added in v0.9.5 

func (c *EC2) DeleteVpcEndpointsRequest(input *DeleteVpcEndpointsInput) (req *request.Request, output *DeleteVpcEndpointsOutput)

DeleteVpcEndpointsRequest generates a "aws/request.Request" representing the client's request for the DeleteVpcEndpoints operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpcEndpoints method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpcEndpointsRequest method.
req, resp := client.DeleteVpcEndpointsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpcPeeringConnection added in v0.9.5 

func (c *EC2) DeleteVpcPeeringConnection(input *DeleteVpcPeeringConnectionInput) (*DeleteVpcPeeringConnectionOutput, error)

Deletes a VPC peering connection. Either the owner of the requester VPC or the owner of the peer VPC can delete the VPC peering connection if it's in the active state. The owner of the requester VPC can delete a VPC peering connection in the pending-acceptance state.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpcPeeringConnectionInput{
		VpcPeeringConnectionId: aws.String("String"), // Required
		DryRun:                 aws.Bool(true),
	}
	resp, err := svc.DeleteVpcPeeringConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpcPeeringConnectionRequest added in v0.9.5 

func (c *EC2) DeleteVpcPeeringConnectionRequest(input *DeleteVpcPeeringConnectionInput) (req *request.Request, output *DeleteVpcPeeringConnectionOutput)

DeleteVpcPeeringConnectionRequest generates a "aws/request.Request" representing the client's request for the DeleteVpcPeeringConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpcPeeringConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpcPeeringConnectionRequest method.
req, resp := client.DeleteVpcPeeringConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpcRequest added in v0.9.5 

func (c *EC2) DeleteVpcRequest(input *DeleteVpcInput) (req *request.Request, output *DeleteVpcOutput)

DeleteVpcRequest generates a "aws/request.Request" representing the client's request for the DeleteVpc operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpc method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpcRequest method.
req, resp := client.DeleteVpcRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpnConnection added in v0.9.5 

func (c *EC2) DeleteVpnConnection(input *DeleteVpnConnectionInput) (*DeleteVpnConnectionOutput, error)

Deletes the specified VPN connection.

If you're deleting the VPC and its associated components, we recommend that you detach the virtual private gateway from the VPC and delete the VPC before deleting the VPN connection. If you believe that the tunnel credentials for your VPN connection have been compromised, you can delete the VPN connection and create a new one that has new keys, without needing to delete the VPC or virtual private gateway. If you create a new VPN connection, you must reconfigure the customer gateway using the new configuration information returned with the new VPN connection ID.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpnConnectionInput{
		VpnConnectionId: aws.String("String"), // Required
		DryRun:          aws.Bool(true),
	}
	resp, err := svc.DeleteVpnConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpnConnectionRequest added in v0.9.5 

func (c *EC2) DeleteVpnConnectionRequest(input *DeleteVpnConnectionInput) (req *request.Request, output *DeleteVpnConnectionOutput)

DeleteVpnConnectionRequest generates a "aws/request.Request" representing the client's request for the DeleteVpnConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpnConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpnConnectionRequest method.
req, resp := client.DeleteVpnConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpnConnectionRoute added in v0.9.5 

func (c *EC2) DeleteVpnConnectionRoute(input *DeleteVpnConnectionRouteInput) (*DeleteVpnConnectionRouteOutput, error)

Deletes the specified static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpnConnectionRouteInput{
		DestinationCidrBlock: aws.String("String"), // Required
		VpnConnectionId:      aws.String("String"), // Required
	}
	resp, err := svc.DeleteVpnConnectionRoute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpnConnectionRouteRequest added in v0.9.5 

func (c *EC2) DeleteVpnConnectionRouteRequest(input *DeleteVpnConnectionRouteInput) (req *request.Request, output *DeleteVpnConnectionRouteOutput)

DeleteVpnConnectionRouteRequest generates a "aws/request.Request" representing the client's request for the DeleteVpnConnectionRoute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpnConnectionRoute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpnConnectionRouteRequest method.
req, resp := client.DeleteVpnConnectionRouteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeleteVpnGateway added in v0.9.5 

func (c *EC2) DeleteVpnGateway(input *DeleteVpnGatewayInput) (*DeleteVpnGatewayOutput, error)

Deletes the specified virtual private gateway. We recommend that before you delete a virtual private gateway, you detach it from the VPC and delete the VPN connection. Note that you don't need to delete the virtual private gateway if you plan to delete and recreate the VPN connection between your VPC and your network.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeleteVpnGatewayInput{
		VpnGatewayId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.DeleteVpnGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeleteVpnGatewayRequest added in v0.9.5 

func (c *EC2) DeleteVpnGatewayRequest(input *DeleteVpnGatewayInput) (req *request.Request, output *DeleteVpnGatewayOutput)

DeleteVpnGatewayRequest generates a "aws/request.Request" representing the client's request for the DeleteVpnGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVpnGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteVpnGatewayRequest method.
req, resp := client.DeleteVpnGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DeregisterImage 

func (c *EC2) DeregisterImage(input *DeregisterImageInput) (*DeregisterImageOutput, error)

Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances.

This command does not delete the AMI.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DeregisterImageInput{
		ImageId: aws.String("String"), // Required
		DryRun:  aws.Bool(true),
	}
	resp, err := svc.DeregisterImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DeregisterImageRequest 

func (c *EC2) DeregisterImageRequest(input *DeregisterImageInput) (req *request.Request, output *DeregisterImageOutput)

DeregisterImageRequest generates a "aws/request.Request" representing the client's request for the DeregisterImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeregisterImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeregisterImageRequest method.
req, resp := client.DeregisterImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeAccountAttributes 

func (c *EC2) DescribeAccountAttributes(input *DescribeAccountAttributesInput) (*DescribeAccountAttributesOutput, error)

Describes attributes of your AWS account. The following are the supported account attributes: 

supported-platforms: Indicates whether your account can launch instances

into EC2-Classic and EC2-VPC, or only into EC2-VPC. 

default-vpc: The ID of the default VPC for your account, or none.

max-instances: The maximum number of On-Demand instances that you can

run. 

vpc-max-security-groups-per-interface: The maximum number of security

groups that you can assign to a network interface. 

max-elastic-ips: The maximum number of Elastic IP addresses that you

can allocate for use with EC2-Classic. 

vpc-max-elastic-ips: The maximum number of Elastic IP addresses that

you can allocate for use with EC2-VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeAccountAttributesInput{
		AttributeNames: []*string{
			aws.String("AccountAttributeName"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DescribeAccountAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeAccountAttributesRequest 

func (c *EC2) DescribeAccountAttributesRequest(input *DescribeAccountAttributesInput) (req *request.Request, output *DescribeAccountAttributesOutput)

DescribeAccountAttributesRequest generates a "aws/request.Request" representing the client's request for the DescribeAccountAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAccountAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeAccountAttributesRequest method.
req, resp := client.DescribeAccountAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeAddresses 

func (c *EC2) DescribeAddresses(input *DescribeAddressesInput) (*DescribeAddressesOutput, error)

Describes one or more of your Elastic IP addresses.

An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeAddressesInput{
		AllocationIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		PublicIps: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeAddresses(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeAddressesRequest 

func (c *EC2) DescribeAddressesRequest(input *DescribeAddressesInput) (req *request.Request, output *DescribeAddressesOutput)

DescribeAddressesRequest generates a "aws/request.Request" representing the client's request for the DescribeAddresses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAddresses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeAddressesRequest method.
req, resp := client.DescribeAddressesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeAvailabilityZones 

func (c *EC2) DescribeAvailabilityZones(input *DescribeAvailabilityZonesInput) (*DescribeAvailabilityZonesOutput, error)

Describes one or more of the Availability Zones that are available to you. The results include zones only for the region you're currently using. If there is an event impacting an Availability Zone, you can use this request to view the state and any provided message for that Availability Zone.

For more information, see Regions and Availability Zones (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-regions-availability-zones.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeAvailabilityZonesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		ZoneNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeAvailabilityZones(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeAvailabilityZonesRequest 

func (c *EC2) DescribeAvailabilityZonesRequest(input *DescribeAvailabilityZonesInput) (req *request.Request, output *DescribeAvailabilityZonesOutput)

DescribeAvailabilityZonesRequest generates a "aws/request.Request" representing the client's request for the DescribeAvailabilityZones operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAvailabilityZones method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeAvailabilityZonesRequest method.
req, resp := client.DescribeAvailabilityZonesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeBundleTasks 

func (c *EC2) DescribeBundleTasks(input *DescribeBundleTasksInput) (*DescribeBundleTasksOutput, error)

Describes one or more of your bundling tasks. 

Completed bundle tasks are listed for only a limited time. If your bundle

task is no longer in the list, you can still register an AMI from it. Just use RegisterImage with the Amazon S3 bucket name and image manifest name you provided to the bundle task.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeBundleTasksInput{
		BundleIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
	}
	resp, err := svc.DescribeBundleTasks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeBundleTasksRequest 

func (c *EC2) DescribeBundleTasksRequest(input *DescribeBundleTasksInput) (req *request.Request, output *DescribeBundleTasksOutput)

DescribeBundleTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeBundleTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeBundleTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeBundleTasksRequest method.
req, resp := client.DescribeBundleTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeClassicLinkInstances 

func (c *EC2) DescribeClassicLinkInstances(input *DescribeClassicLinkInstancesInput) (*DescribeClassicLinkInstancesOutput, error)

Describes one or more of your linked EC2-Classic instances. This request only returns information about EC2-Classic instances linked to a VPC through ClassicLink; you cannot use this request to return information about other instances.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeClassicLinkInstancesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		InstanceIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeClassicLinkInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeClassicLinkInstancesRequest 

func (c *EC2) DescribeClassicLinkInstancesRequest(input *DescribeClassicLinkInstancesInput) (req *request.Request, output *DescribeClassicLinkInstancesOutput)

DescribeClassicLinkInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeClassicLinkInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeClassicLinkInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeClassicLinkInstancesRequest method.
req, resp := client.DescribeClassicLinkInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeConversionTasks 

func (c *EC2) DescribeConversionTasks(input *DescribeConversionTasksInput) (*DescribeConversionTasksOutput, error)

Describes one or more of your conversion tasks. For more information, see the VM Import/Export User Guide (http://docs.aws.amazon.com/vm-import/latest/userguide/).

For information about the import manifest referenced by this API action, see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeConversionTasksInput{
		ConversionTaskIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DescribeConversionTasks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeConversionTasksRequest 

func (c *EC2) DescribeConversionTasksRequest(input *DescribeConversionTasksInput) (req *request.Request, output *DescribeConversionTasksOutput)

DescribeConversionTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeConversionTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConversionTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeConversionTasksRequest method.
req, resp := client.DescribeConversionTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeCustomerGateways 

func (c *EC2) DescribeCustomerGateways(input *DescribeCustomerGatewaysInput) (*DescribeCustomerGatewaysOutput, error)

Describes one or more of your VPN customer gateways.

For more information about VPN customer gateways, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeCustomerGatewaysInput{
		CustomerGatewayIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
	}
	resp, err := svc.DescribeCustomerGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeCustomerGatewaysRequest 

func (c *EC2) DescribeCustomerGatewaysRequest(input *DescribeCustomerGatewaysInput) (req *request.Request, output *DescribeCustomerGatewaysOutput)

DescribeCustomerGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeCustomerGateways operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCustomerGateways method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeCustomerGatewaysRequest method.
req, resp := client.DescribeCustomerGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeDhcpOptions added in v0.9.5 

func (c *EC2) DescribeDhcpOptions(input *DescribeDhcpOptionsInput) (*DescribeDhcpOptionsOutput, error)

Describes one or more of your DHCP options sets.

For more information about DHCP options sets, see DHCP Options Sets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_DHCP_Options.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeDhcpOptionsInput{
		DhcpOptionsIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
	}
	resp, err := svc.DescribeDhcpOptions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeDhcpOptionsRequest added in v0.9.5 

func (c *EC2) DescribeDhcpOptionsRequest(input *DescribeDhcpOptionsInput) (req *request.Request, output *DescribeDhcpOptionsOutput)

DescribeDhcpOptionsRequest generates a "aws/request.Request" representing the client's request for the DescribeDhcpOptions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeDhcpOptions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeDhcpOptionsRequest method.
req, resp := client.DescribeDhcpOptionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeExportTasks 

func (c *EC2) DescribeExportTasks(input *DescribeExportTasksInput) (*DescribeExportTasksOutput, error)

Describes one or more of your export tasks.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeExportTasksInput{
		ExportTaskIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeExportTasks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeExportTasksRequest 

func (c *EC2) DescribeExportTasksRequest(input *DescribeExportTasksInput) (req *request.Request, output *DescribeExportTasksOutput)

DescribeExportTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeExportTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeExportTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeExportTasksRequest method.
req, resp := client.DescribeExportTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeFlowLogs added in v0.6.2 

func (c *EC2) DescribeFlowLogs(input *DescribeFlowLogsInput) (*DescribeFlowLogsOutput, error)

Describes one or more flow logs. To view the information in your flow logs (the log streams for the network interfaces), you must use the CloudWatch Logs console or the CloudWatch Logs API.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeFlowLogsInput{
		Filter: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		FlowLogIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeFlowLogs(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeFlowLogsRequest added in v0.6.2 

func (c *EC2) DescribeFlowLogsRequest(input *DescribeFlowLogsInput) (req *request.Request, output *DescribeFlowLogsOutput)

DescribeFlowLogsRequest generates a "aws/request.Request" representing the client's request for the DescribeFlowLogs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeFlowLogs method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeFlowLogsRequest method.
req, resp := client.DescribeFlowLogsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeHostReservationOfferings added in v1.4.3 

func (c *EC2) DescribeHostReservationOfferings(input *DescribeHostReservationOfferingsInput) (*DescribeHostReservationOfferingsOutput, error)

Describes the Dedicated Host Reservations that are available to purchase.

The results describe all the Dedicated Host Reservation offerings, including offerings that may not match the instance family and region of your Dedicated Hosts. When purchasing an offering, ensure that the the instance family and region of the offering matches that of the Dedicated Host/s it will be associated with. For an overview of supported instance types, see Dedicated Hosts Overview (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/dedicated-hosts-overview.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeHostReservationOfferingsInput{
		Filter: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxDuration: aws.Int64(1),
		MaxResults:  aws.Int64(1),
		MinDuration: aws.Int64(1),
		NextToken:   aws.String("String"),
		OfferingId:  aws.String("String"),
	}
	resp, err := svc.DescribeHostReservationOfferings(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeHostReservationOfferingsRequest added in v1.4.3 

func (c *EC2) DescribeHostReservationOfferingsRequest(input *DescribeHostReservationOfferingsInput) (req *request.Request, output *DescribeHostReservationOfferingsOutput)

DescribeHostReservationOfferingsRequest generates a "aws/request.Request" representing the client's request for the DescribeHostReservationOfferings operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeHostReservationOfferings method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeHostReservationOfferingsRequest method.
req, resp := client.DescribeHostReservationOfferingsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeHostReservations added in v1.4.3 

func (c *EC2) DescribeHostReservations(input *DescribeHostReservationsInput) (*DescribeHostReservationsOutput, error)

Describes Dedicated Host Reservations which are associated with Dedicated Hosts in your account.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeHostReservationsInput{
		Filter: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		HostReservationIdSet: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeHostReservations(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeHostReservationsRequest added in v1.4.3 

func (c *EC2) DescribeHostReservationsRequest(input *DescribeHostReservationsInput) (req *request.Request, output *DescribeHostReservationsOutput)

DescribeHostReservationsRequest generates a "aws/request.Request" representing the client's request for the DescribeHostReservations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeHostReservations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeHostReservationsRequest method.
req, resp := client.DescribeHostReservationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeHosts added in v1.0.1 

func (c *EC2) DescribeHosts(input *DescribeHostsInput) (*DescribeHostsOutput, error)

Describes one or more of your Dedicated Hosts.

The results describe only the Dedicated Hosts in the region you're currently using. All listed instances consume capacity on your Dedicated Host. Dedicated Hosts that have recently been released will be listed with the state released.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeHostsInput{
		Filter: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		HostIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeHosts(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeHostsRequest added in v1.0.1 

func (c *EC2) DescribeHostsRequest(input *DescribeHostsInput) (req *request.Request, output *DescribeHostsOutput)

DescribeHostsRequest generates a "aws/request.Request" representing the client's request for the DescribeHosts operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeHosts method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeHostsRequest method.
req, resp := client.DescribeHostsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeIdFormat added in v1.0.1 

func (c *EC2) DescribeIdFormat(input *DescribeIdFormatInput) (*DescribeIdFormatOutput, error)

Describes the ID format settings for your resources on a per-region basis, for example, to view which resource types are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information about other resource types.

The following resource types support longer IDs: instance | reservation | snapshot | volume.

These settings apply to the IAM user who makes the request; they do not apply to the entire AWS account. By default, an IAM user defaults to the same settings as the root user, unless they explicitly override the settings by running the ModifyIdFormat command. Resources created with longer IDs are visible to all IAM users, regardless of these settings and provided that they have permission to use the relevant Describe command for the resource type.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeIdFormatInput{
		Resource: aws.String("String"),
	}
	resp, err := svc.DescribeIdFormat(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeIdFormatRequest added in v1.0.1 

func (c *EC2) DescribeIdFormatRequest(input *DescribeIdFormatInput) (req *request.Request, output *DescribeIdFormatOutput)

DescribeIdFormatRequest generates a "aws/request.Request" representing the client's request for the DescribeIdFormat operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeIdFormat method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeIdFormatRequest method.
req, resp := client.DescribeIdFormatRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeIdentityIdFormat added in v1.2.0 

func (c *EC2) DescribeIdentityIdFormat(input *DescribeIdentityIdFormatInput) (*DescribeIdentityIdFormatOutput, error)

Describes the ID format settings for resources for the specified IAM user, IAM role, or root user. For example, you can view the resource types that are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information about other resource types. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) in the Amazon Elastic Compute Cloud User Guide.

The following resource types support longer IDs: instance | reservation | snapshot | volume.

These settings apply to the principal specified in the request. They do not apply to the principal that makes the request.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeIdentityIdFormatInput{
		PrincipalArn: aws.String("String"), // Required
		Resource:     aws.String("String"),
	}
	resp, err := svc.DescribeIdentityIdFormat(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeIdentityIdFormatRequest added in v1.2.0 

func (c *EC2) DescribeIdentityIdFormatRequest(input *DescribeIdentityIdFormatInput) (req *request.Request, output *DescribeIdentityIdFormatOutput)

DescribeIdentityIdFormatRequest generates a "aws/request.Request" representing the client's request for the DescribeIdentityIdFormat operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeIdentityIdFormat method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeIdentityIdFormatRequest method.
req, resp := client.DescribeIdentityIdFormatRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeImageAttribute 

func (c *EC2) DescribeImageAttribute(input *DescribeImageAttributeInput) (*DescribeImageAttributeOutput, error)

Describes the specified attribute of the specified AMI. You can specify only one attribute at a time.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeImageAttributeInput{
		Attribute: aws.String("ImageAttributeName"), // Required
		ImageId:   aws.String("String"),             // Required
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.DescribeImageAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeImageAttributeRequest 

func (c *EC2) DescribeImageAttributeRequest(input *DescribeImageAttributeInput) (req *request.Request, output *DescribeImageAttributeOutput)

DescribeImageAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeImageAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImageAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeImageAttributeRequest method.
req, resp := client.DescribeImageAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeImages 

func (c *EC2) DescribeImages(input *DescribeImagesInput) (*DescribeImagesOutput, error)

Describes one or more of the images (AMIs, AKIs, and ARIs) available to you. Images available to you include public images, private images that you own, and private images owned by other AWS accounts but for which you have explicit launch permissions. 

Deregistered images are included in the returned results for an unspecified

interval after deregistration.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeImagesInput{
		DryRun: aws.Bool(true),
		ExecutableUsers: []*string{
			aws.String("String"), // Required
			// More values...
		},
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		ImageIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		Owners: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeImages(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeImagesRequest 

func (c *EC2) DescribeImagesRequest(input *DescribeImagesInput) (req *request.Request, output *DescribeImagesOutput)

DescribeImagesRequest generates a "aws/request.Request" representing the client's request for the DescribeImages operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImages method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeImagesRequest method.
req, resp := client.DescribeImagesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeImportImageTasks 

func (c *EC2) DescribeImportImageTasks(input *DescribeImportImageTasksInput) (*DescribeImportImageTasksOutput, error)

Displays details about an import virtual machine or import snapshot tasks that are already created.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeImportImageTasksInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		ImportTaskIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeImportImageTasks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeImportImageTasksRequest 

func (c *EC2) DescribeImportImageTasksRequest(input *DescribeImportImageTasksInput) (req *request.Request, output *DescribeImportImageTasksOutput)

DescribeImportImageTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeImportImageTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImportImageTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeImportImageTasksRequest method.
req, resp := client.DescribeImportImageTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeImportSnapshotTasks 

func (c *EC2) DescribeImportSnapshotTasks(input *DescribeImportSnapshotTasksInput) (*DescribeImportSnapshotTasksOutput, error)

Describes your import snapshot tasks.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeImportSnapshotTasksInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		ImportTaskIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeImportSnapshotTasks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeImportSnapshotTasksRequest 

func (c *EC2) DescribeImportSnapshotTasksRequest(input *DescribeImportSnapshotTasksInput) (req *request.Request, output *DescribeImportSnapshotTasksOutput)

DescribeImportSnapshotTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeImportSnapshotTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImportSnapshotTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeImportSnapshotTasksRequest method.
req, resp := client.DescribeImportSnapshotTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeInstanceAttribute 

func (c *EC2) DescribeInstanceAttribute(input *DescribeInstanceAttributeInput) (*DescribeInstanceAttributeOutput, error)

Describes the specified attribute of the specified instance. You can specify only one attribute at a time. Valid attribute values are: instanceType | kernel | ramdisk | userData | disableApiTermination | instanceInitiatedShutdownBehavior | rootDeviceName | blockDeviceMapping | productCodes | sourceDestCheck | groupSet | ebsOptimized | sriovNetSupport

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeInstanceAttributeInput{
		Attribute:  aws.String("InstanceAttributeName"), // Required
		InstanceId: aws.String("String"),                // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.DescribeInstanceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeInstanceAttributeRequest 

func (c *EC2) DescribeInstanceAttributeRequest(input *DescribeInstanceAttributeInput) (req *request.Request, output *DescribeInstanceAttributeOutput)

DescribeInstanceAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeInstanceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInstanceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeInstanceAttributeRequest method.
req, resp := client.DescribeInstanceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeInstanceStatus 

func (c *EC2) DescribeInstanceStatus(input *DescribeInstanceStatusInput) (*DescribeInstanceStatusOutput, error)

Describes the status of one or more instances. By default, only running instances are described, unless specified otherwise.

Instance status includes the following components: 

Status checks - Amazon EC2 performs status checks on running EC2 instances

to identify hardware and software issues. For more information, see Status Checks for Your Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-system-instance-status-check.html) and Troubleshooting Instances with Failed Status Checks (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstances.html) in the Amazon Elastic Compute Cloud User Guide. 

Scheduled events - Amazon EC2 can schedule events (such as reboot, stop,

or terminate) for your instances related to hardware issues, software updates, or system maintenance. For more information, see Scheduled Events for Your Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-instances-status-check_sched.html) in the Amazon Elastic Compute Cloud User Guide. 

Instance state - You can manage your instances from the moment you launch

them through their termination. For more information, see Instance Lifecycle (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeInstanceStatusInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		IncludeAllInstances: aws.Bool(true),
		InstanceIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeInstanceStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeInstanceStatusPages 

func (c *EC2) DescribeInstanceStatusPages(input *DescribeInstanceStatusInput, fn func(p *DescribeInstanceStatusOutput, lastPage bool) (shouldContinue bool)) error

DescribeInstanceStatusPages iterates over the pages of a DescribeInstanceStatus operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeInstanceStatus method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeInstanceStatus operation.
pageNum := 0
err := client.DescribeInstanceStatusPages(params,
    func(page *DescribeInstanceStatusOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeInstanceStatusRequest 

func (c *EC2) DescribeInstanceStatusRequest(input *DescribeInstanceStatusInput) (req *request.Request, output *DescribeInstanceStatusOutput)

DescribeInstanceStatusRequest generates a "aws/request.Request" representing the client's request for the DescribeInstanceStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInstanceStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeInstanceStatusRequest method.
req, resp := client.DescribeInstanceStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeInstances 

func (c *EC2) DescribeInstances(input *DescribeInstancesInput) (*DescribeInstancesOutput, error)

Describes one or more of your instances.

If you specify one or more instance IDs, Amazon EC2 returns information for those instances. If you do not specify instance IDs, Amazon EC2 returns information for all relevant instances. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the returned results.

Recently terminated instances might appear in the returned results. This interval is usually less than one hour.

If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeInstancesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		InstanceIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeInstancesPages 

func (c *EC2) DescribeInstancesPages(input *DescribeInstancesInput, fn func(p *DescribeInstancesOutput, lastPage bool) (shouldContinue bool)) error

DescribeInstancesPages iterates over the pages of a DescribeInstances operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeInstances method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeInstances operation.
pageNum := 0
err := client.DescribeInstancesPages(params,
    func(page *DescribeInstancesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeInstancesRequest 

func (c *EC2) DescribeInstancesRequest(input *DescribeInstancesInput) (req *request.Request, output *DescribeInstancesOutput)

DescribeInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeInstancesRequest method.
req, resp := client.DescribeInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeInternetGateways 

func (c *EC2) DescribeInternetGateways(input *DescribeInternetGatewaysInput) (*DescribeInternetGatewaysOutput, error)

Describes one or more of your Internet gateways.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeInternetGatewaysInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		InternetGatewayIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeInternetGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeInternetGatewaysRequest 

func (c *EC2) DescribeInternetGatewaysRequest(input *DescribeInternetGatewaysInput) (req *request.Request, output *DescribeInternetGatewaysOutput)

DescribeInternetGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeInternetGateways operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInternetGateways method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeInternetGatewaysRequest method.
req, resp := client.DescribeInternetGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeKeyPairs 

func (c *EC2) DescribeKeyPairs(input *DescribeKeyPairsInput) (*DescribeKeyPairsOutput, error)

Describes one or more of your key pairs.

For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeKeyPairsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		KeyNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeKeyPairs(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeKeyPairsRequest 

func (c *EC2) DescribeKeyPairsRequest(input *DescribeKeyPairsInput) (req *request.Request, output *DescribeKeyPairsOutput)

DescribeKeyPairsRequest generates a "aws/request.Request" representing the client's request for the DescribeKeyPairs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeKeyPairs method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeKeyPairsRequest method.
req, resp := client.DescribeKeyPairsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeMovingAddresses 

func (c *EC2) DescribeMovingAddresses(input *DescribeMovingAddressesInput) (*DescribeMovingAddressesOutput, error)

Describes your Elastic IP addresses that are being moved to the EC2-VPC platform, or that are being restored to the EC2-Classic platform. This request does not return information about any other Elastic IP addresses in your account.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeMovingAddressesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		PublicIps: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeMovingAddresses(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeMovingAddressesRequest 

func (c *EC2) DescribeMovingAddressesRequest(input *DescribeMovingAddressesInput) (req *request.Request, output *DescribeMovingAddressesOutput)

DescribeMovingAddressesRequest generates a "aws/request.Request" representing the client's request for the DescribeMovingAddresses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeMovingAddresses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeMovingAddressesRequest method.
req, resp := client.DescribeMovingAddressesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeNatGateways added in v1.0.6 

func (c *EC2) DescribeNatGateways(input *DescribeNatGatewaysInput) (*DescribeNatGatewaysOutput, error)

Describes one or more of the your NAT gateways.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeNatGatewaysInput{
		Filter: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NatGatewayIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		NextToken: aws.String("String"),
	}
	resp, err := svc.DescribeNatGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeNatGatewaysRequest added in v1.0.6 

func (c *EC2) DescribeNatGatewaysRequest(input *DescribeNatGatewaysInput) (req *request.Request, output *DescribeNatGatewaysOutput)

DescribeNatGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeNatGateways operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeNatGateways method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeNatGatewaysRequest method.
req, resp := client.DescribeNatGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeNetworkAcls added in v0.9.5 

func (c *EC2) DescribeNetworkAcls(input *DescribeNetworkAclsInput) (*DescribeNetworkAclsOutput, error)

Describes one or more of your network ACLs.

For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeNetworkAclsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		NetworkAclIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeNetworkAcls(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeNetworkAclsRequest added in v0.9.5 

func (c *EC2) DescribeNetworkAclsRequest(input *DescribeNetworkAclsInput) (req *request.Request, output *DescribeNetworkAclsOutput)

DescribeNetworkAclsRequest generates a "aws/request.Request" representing the client's request for the DescribeNetworkAcls operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeNetworkAcls method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeNetworkAclsRequest method.
req, resp := client.DescribeNetworkAclsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeNetworkInterfaceAttribute 

func (c *EC2) DescribeNetworkInterfaceAttribute(input *DescribeNetworkInterfaceAttributeInput) (*DescribeNetworkInterfaceAttributeOutput, error)

Describes a network interface attribute. You can specify only one attribute at a time.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeNetworkInterfaceAttributeInput{
		NetworkInterfaceId: aws.String("String"), // Required
		Attribute:          aws.String("NetworkInterfaceAttribute"),
		DryRun:             aws.Bool(true),
	}
	resp, err := svc.DescribeNetworkInterfaceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeNetworkInterfaceAttributeRequest 

func (c *EC2) DescribeNetworkInterfaceAttributeRequest(input *DescribeNetworkInterfaceAttributeInput) (req *request.Request, output *DescribeNetworkInterfaceAttributeOutput)

DescribeNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeNetworkInterfaceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeNetworkInterfaceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeNetworkInterfaceAttributeRequest method.
req, resp := client.DescribeNetworkInterfaceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeNetworkInterfaces 

func (c *EC2) DescribeNetworkInterfaces(input *DescribeNetworkInterfacesInput) (*DescribeNetworkInterfacesOutput, error)

Describes one or more of your network interfaces.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeNetworkInterfacesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		NetworkInterfaceIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeNetworkInterfaces(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeNetworkInterfacesRequest 

func (c *EC2) DescribeNetworkInterfacesRequest(input *DescribeNetworkInterfacesInput) (req *request.Request, output *DescribeNetworkInterfacesOutput)

DescribeNetworkInterfacesRequest generates a "aws/request.Request" representing the client's request for the DescribeNetworkInterfaces operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeNetworkInterfaces method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeNetworkInterfacesRequest method.
req, resp := client.DescribeNetworkInterfacesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribePlacementGroups 

func (c *EC2) DescribePlacementGroups(input *DescribePlacementGroupsInput) (*DescribePlacementGroupsOutput, error)

Describes one or more of your placement groups. For more information about placement groups and cluster instances, see Cluster Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using_cluster_computing.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribePlacementGroupsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		GroupNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribePlacementGroups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribePlacementGroupsRequest 

func (c *EC2) DescribePlacementGroupsRequest(input *DescribePlacementGroupsInput) (req *request.Request, output *DescribePlacementGroupsOutput)

DescribePlacementGroupsRequest generates a "aws/request.Request" representing the client's request for the DescribePlacementGroups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribePlacementGroups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribePlacementGroupsRequest method.
req, resp := client.DescribePlacementGroupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribePrefixLists 

func (c *EC2) DescribePrefixLists(input *DescribePrefixListsInput) (*DescribePrefixListsOutput, error)

Describes available AWS services in a prefix list format, which includes the prefix list name and prefix list ID of the service and the IP address range for the service. A prefix list ID is required for creating an outbound security group rule that allows traffic from a VPC to access an AWS service through a VPC endpoint.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribePrefixListsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		PrefixListIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribePrefixLists(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribePrefixListsRequest 

func (c *EC2) DescribePrefixListsRequest(input *DescribePrefixListsInput) (req *request.Request, output *DescribePrefixListsOutput)

DescribePrefixListsRequest generates a "aws/request.Request" representing the client's request for the DescribePrefixLists operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribePrefixLists method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribePrefixListsRequest method.
req, resp := client.DescribePrefixListsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeRegions 

func (c *EC2) DescribeRegions(input *DescribeRegionsInput) (*DescribeRegionsOutput, error)

Describes one or more regions that are currently available to you.

For a list of the regions supported by Amazon EC2, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeRegionsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		RegionNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeRegions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeRegionsRequest 

func (c *EC2) DescribeRegionsRequest(input *DescribeRegionsInput) (req *request.Request, output *DescribeRegionsOutput)

DescribeRegionsRequest generates a "aws/request.Request" representing the client's request for the DescribeRegions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeRegions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeRegionsRequest method.
req, resp := client.DescribeRegionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeReservedInstances 

func (c *EC2) DescribeReservedInstances(input *DescribeReservedInstancesInput) (*DescribeReservedInstancesOutput, error)

Describes one or more of the Reserved Instances that you purchased.

For more information about Reserved Instances, see Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeReservedInstancesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		OfferingClass: aws.String("OfferingClassType"),
		OfferingType:  aws.String("OfferingTypeValues"),
		ReservedInstancesIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeReservedInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeReservedInstancesListings 

func (c *EC2) DescribeReservedInstancesListings(input *DescribeReservedInstancesListingsInput) (*DescribeReservedInstancesListingsOutput, error)

Describes your account's Reserved Instance listings in the Reserved Instance Marketplace.

The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.

As a seller, you choose to list some or all of your Reserved Instances, and you specify the upfront price to receive for them. Your Reserved Instances are then listed in the Reserved Instance Marketplace and are available for purchase.

As a buyer, you specify the configuration of the Reserved Instance to purchase, and the Marketplace matches what you're searching for with what's available. The Marketplace first sells the lowest priced Reserved Instances to you, and continues to sell available Reserved Instance listings to you until your demand is met. You are charged based on the total price of all of the listings that you purchase.

For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeReservedInstancesListingsInput{
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		ReservedInstancesId:        aws.String("String"),
		ReservedInstancesListingId: aws.String("String"),
	}
	resp, err := svc.DescribeReservedInstancesListings(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeReservedInstancesListingsRequest 

func (c *EC2) DescribeReservedInstancesListingsRequest(input *DescribeReservedInstancesListingsInput) (req *request.Request, output *DescribeReservedInstancesListingsOutput)

DescribeReservedInstancesListingsRequest generates a "aws/request.Request" representing the client's request for the DescribeReservedInstancesListings operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeReservedInstancesListings method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeReservedInstancesListingsRequest method.
req, resp := client.DescribeReservedInstancesListingsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeReservedInstancesModifications 

func (c *EC2) DescribeReservedInstancesModifications(input *DescribeReservedInstancesModificationsInput) (*DescribeReservedInstancesModificationsOutput, error)

Describes the modifications made to your Reserved Instances. If no parameter is specified, information about all your Reserved Instances modification requests is returned. If a modification ID is specified, only information about the specific modification is returned.

For more information, see Modifying Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeReservedInstancesModificationsInput{
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		NextToken: aws.String("String"),
		ReservedInstancesModificationIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeReservedInstancesModifications(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeReservedInstancesModificationsPages 

func (c *EC2) DescribeReservedInstancesModificationsPages(input *DescribeReservedInstancesModificationsInput, fn func(p *DescribeReservedInstancesModificationsOutput, lastPage bool) (shouldContinue bool)) error

DescribeReservedInstancesModificationsPages iterates over the pages of a DescribeReservedInstancesModifications operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeReservedInstancesModifications method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeReservedInstancesModifications operation.
pageNum := 0
err := client.DescribeReservedInstancesModificationsPages(params,
    func(page *DescribeReservedInstancesModificationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeReservedInstancesModificationsRequest 

func (c *EC2) DescribeReservedInstancesModificationsRequest(input *DescribeReservedInstancesModificationsInput) (req *request.Request, output *DescribeReservedInstancesModificationsOutput)

DescribeReservedInstancesModificationsRequest generates a "aws/request.Request" representing the client's request for the DescribeReservedInstancesModifications operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeReservedInstancesModifications method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeReservedInstancesModificationsRequest method.
req, resp := client.DescribeReservedInstancesModificationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeReservedInstancesOfferings 

func (c *EC2) DescribeReservedInstancesOfferings(input *DescribeReservedInstancesOfferingsInput) (*DescribeReservedInstancesOfferingsOutput, error)

Describes Reserved Instance offerings that are available for purchase. With Reserved Instances, you purchase the right to launch instances for a period of time. During that time period, you do not receive insufficient capacity errors, and you pay a lower usage rate than the rate charged for On-Demand instances for the actual time used.

If you have listed your own Reserved Instances for sale in the Reserved Instance Marketplace, they will be excluded from these results. This is to ensure that you do not purchase your own Reserved Instances.

For more information, see Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeReservedInstancesOfferingsInput{
		AvailabilityZone: aws.String("String"),
		DryRun:           aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		IncludeMarketplace: aws.Bool(true),
		InstanceTenancy:    aws.String("Tenancy"),
		InstanceType:       aws.String("InstanceType"),
		MaxDuration:        aws.Int64(1),
		MaxInstanceCount:   aws.Int64(1),
		MaxResults:         aws.Int64(1),
		MinDuration:        aws.Int64(1),
		NextToken:          aws.String("String"),
		OfferingClass:      aws.String("OfferingClassType"),
		OfferingType:       aws.String("OfferingTypeValues"),
		ProductDescription: aws.String("RIProductDescription"),
		ReservedInstancesOfferingIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeReservedInstancesOfferings(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeReservedInstancesOfferingsPages 

func (c *EC2) DescribeReservedInstancesOfferingsPages(input *DescribeReservedInstancesOfferingsInput, fn func(p *DescribeReservedInstancesOfferingsOutput, lastPage bool) (shouldContinue bool)) error

DescribeReservedInstancesOfferingsPages iterates over the pages of a DescribeReservedInstancesOfferings operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeReservedInstancesOfferings method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeReservedInstancesOfferings operation.
pageNum := 0
err := client.DescribeReservedInstancesOfferingsPages(params,
    func(page *DescribeReservedInstancesOfferingsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeReservedInstancesOfferingsRequest 

func (c *EC2) DescribeReservedInstancesOfferingsRequest(input *DescribeReservedInstancesOfferingsInput) (req *request.Request, output *DescribeReservedInstancesOfferingsOutput)

DescribeReservedInstancesOfferingsRequest generates a "aws/request.Request" representing the client's request for the DescribeReservedInstancesOfferings operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeReservedInstancesOfferings method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeReservedInstancesOfferingsRequest method.
req, resp := client.DescribeReservedInstancesOfferingsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeReservedInstancesRequest 

func (c *EC2) DescribeReservedInstancesRequest(input *DescribeReservedInstancesInput) (req *request.Request, output *DescribeReservedInstancesOutput)

DescribeReservedInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeReservedInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeReservedInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeReservedInstancesRequest method.
req, resp := client.DescribeReservedInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeRouteTables 

func (c *EC2) DescribeRouteTables(input *DescribeRouteTablesInput) (*DescribeRouteTablesOutput, error)

Describes one or more of your route tables.

Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations.

For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeRouteTablesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		RouteTableIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeRouteTables(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeRouteTablesRequest 

func (c *EC2) DescribeRouteTablesRequest(input *DescribeRouteTablesInput) (req *request.Request, output *DescribeRouteTablesOutput)

DescribeRouteTablesRequest generates a "aws/request.Request" representing the client's request for the DescribeRouteTables operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeRouteTables method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeRouteTablesRequest method.
req, resp := client.DescribeRouteTablesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeScheduledInstanceAvailability added in v1.0.9 

func (c *EC2) DescribeScheduledInstanceAvailability(input *DescribeScheduledInstanceAvailabilityInput) (*DescribeScheduledInstanceAvailabilityOutput, error)

Finds available schedules that meet the specified criteria.

You can search for an available schedule no more than 3 months in advance. You must meet the minimum required duration of 1,200 hours per year. For example, the minimum daily schedule is 4 hours, the minimum weekly schedule is 24 hours, and the minimum monthly schedule is 100 hours.

After you find a schedule that meets your needs, call PurchaseScheduledInstances to purchase Scheduled Instances with that schedule.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeScheduledInstanceAvailabilityInput{
		FirstSlotStartTimeRange: &ec2.SlotDateTimeRangeRequest{ // Required
			EarliestTime: aws.Time(time.Now()), // Required
			LatestTime:   aws.Time(time.Now()), // Required
		},
		Recurrence: &ec2.ScheduledInstanceRecurrenceRequest{ // Required
			Frequency: aws.String("String"),
			Interval:  aws.Int64(1),
			OccurrenceDays: []*int64{
				aws.Int64(1), // Required
				// More values...
			},
			OccurrenceRelativeToEnd: aws.Bool(true),
			OccurrenceUnit:          aws.String("String"),
		},
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults:             aws.Int64(1),
		MaxSlotDurationInHours: aws.Int64(1),
		MinSlotDurationInHours: aws.Int64(1),
		NextToken:              aws.String("String"),
	}
	resp, err := svc.DescribeScheduledInstanceAvailability(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeScheduledInstanceAvailabilityRequest added in v1.0.9 

func (c *EC2) DescribeScheduledInstanceAvailabilityRequest(input *DescribeScheduledInstanceAvailabilityInput) (req *request.Request, output *DescribeScheduledInstanceAvailabilityOutput)

DescribeScheduledInstanceAvailabilityRequest generates a "aws/request.Request" representing the client's request for the DescribeScheduledInstanceAvailability operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeScheduledInstanceAvailability method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeScheduledInstanceAvailabilityRequest method.
req, resp := client.DescribeScheduledInstanceAvailabilityRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeScheduledInstances added in v1.0.9 

func (c *EC2) DescribeScheduledInstances(input *DescribeScheduledInstancesInput) (*DescribeScheduledInstancesOutput, error)

Describes one or more of your Scheduled Instances.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeScheduledInstancesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		ScheduledInstanceIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SlotStartTimeRange: &ec2.SlotStartTimeRangeRequest{
			EarliestTime: aws.Time(time.Now()),
			LatestTime:   aws.Time(time.Now()),
		},
	}
	resp, err := svc.DescribeScheduledInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeScheduledInstancesRequest added in v1.0.9 

func (c *EC2) DescribeScheduledInstancesRequest(input *DescribeScheduledInstancesInput) (req *request.Request, output *DescribeScheduledInstancesOutput)

DescribeScheduledInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeScheduledInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeScheduledInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeScheduledInstancesRequest method.
req, resp := client.DescribeScheduledInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSecurityGroupReferences added in v1.1.26 

func (c *EC2) DescribeSecurityGroupReferences(input *DescribeSecurityGroupReferencesInput) (*DescribeSecurityGroupReferencesOutput, error)

[EC2-VPC only] Describes the VPCs on the other side of a VPC peering connection that are referencing the security groups you've specified in this request.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSecurityGroupReferencesInput{
		GroupId: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DescribeSecurityGroupReferences(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSecurityGroupReferencesRequest added in v1.1.26 

func (c *EC2) DescribeSecurityGroupReferencesRequest(input *DescribeSecurityGroupReferencesInput) (req *request.Request, output *DescribeSecurityGroupReferencesOutput)

DescribeSecurityGroupReferencesRequest generates a "aws/request.Request" representing the client's request for the DescribeSecurityGroupReferences operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSecurityGroupReferences method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSecurityGroupReferencesRequest method.
req, resp := client.DescribeSecurityGroupReferencesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSecurityGroups 

func (c *EC2) DescribeSecurityGroups(input *DescribeSecurityGroupsInput) (*DescribeSecurityGroupsOutput, error)

Describes one or more of your security groups.

A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 Security Groups (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_SecurityGroups.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSecurityGroupsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		GroupIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		GroupNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSecurityGroups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSecurityGroupsRequest 

func (c *EC2) DescribeSecurityGroupsRequest(input *DescribeSecurityGroupsInput) (req *request.Request, output *DescribeSecurityGroupsOutput)

DescribeSecurityGroupsRequest generates a "aws/request.Request" representing the client's request for the DescribeSecurityGroups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSecurityGroups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSecurityGroupsRequest method.
req, resp := client.DescribeSecurityGroupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSnapshotAttribute 

func (c *EC2) DescribeSnapshotAttribute(input *DescribeSnapshotAttributeInput) (*DescribeSnapshotAttributeOutput, error)

Describes the specified attribute of the specified snapshot. You can specify only one attribute at a time.

For more information about EBS snapshots, see Amazon EBS Snapshots (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSnapshotAttributeInput{
		Attribute:  aws.String("SnapshotAttributeName"), // Required
		SnapshotId: aws.String("String"),                // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.DescribeSnapshotAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSnapshotAttributeRequest 

func (c *EC2) DescribeSnapshotAttributeRequest(input *DescribeSnapshotAttributeInput) (req *request.Request, output *DescribeSnapshotAttributeOutput)

DescribeSnapshotAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeSnapshotAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSnapshotAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSnapshotAttributeRequest method.
req, resp := client.DescribeSnapshotAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSnapshots 

func (c *EC2) DescribeSnapshots(input *DescribeSnapshotsInput) (*DescribeSnapshotsOutput, error)

Describes one or more of the EBS snapshots available to you. Available snapshots include public snapshots available for any AWS account to launch, private snapshots that you own, and private snapshots owned by another AWS account but for which you've been given explicit create volume permissions.

The create volume permissions fall into the following categories: 

public: The owner of the snapshot granted create volume permissions for

the snapshot to the all group. All AWS accounts have create volume permissions for these snapshots. 

explicit: The owner of the snapshot granted create volume permissions

to a specific AWS account. 

implicit: An AWS account has implicit create volume permissions for all

snapshots it owns. 

The list of snapshots returned can be modified by specifying snapshot

IDs, snapshot owners, or AWS accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions.

If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results.

If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the AWS account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own.

If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify AWS account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots.

If you are describing a long list of snapshots, you can paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results.

For more information about EBS snapshots, see Amazon EBS Snapshots (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSSnapshots.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSnapshotsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		OwnerIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		RestorableByUserIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SnapshotIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSnapshots(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSnapshotsPages 

func (c *EC2) DescribeSnapshotsPages(input *DescribeSnapshotsInput, fn func(p *DescribeSnapshotsOutput, lastPage bool) (shouldContinue bool)) error

DescribeSnapshotsPages iterates over the pages of a DescribeSnapshots operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeSnapshots method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeSnapshots operation.
pageNum := 0
err := client.DescribeSnapshotsPages(params,
    func(page *DescribeSnapshotsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeSnapshotsRequest 

func (c *EC2) DescribeSnapshotsRequest(input *DescribeSnapshotsInput) (req *request.Request, output *DescribeSnapshotsOutput)

DescribeSnapshotsRequest generates a "aws/request.Request" representing the client's request for the DescribeSnapshots operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSnapshots method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSnapshotsRequest method.
req, resp := client.DescribeSnapshotsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotDatafeedSubscription 

func (c *EC2) DescribeSpotDatafeedSubscription(input *DescribeSpotDatafeedSubscriptionInput) (*DescribeSpotDatafeedSubscriptionOutput, error)

Describes the data feed for Spot instances. For more information, see Spot Instance Data Feed (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-data-feeds.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotDatafeedSubscriptionInput{
		DryRun: aws.Bool(true),
	}
	resp, err := svc.DescribeSpotDatafeedSubscription(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotDatafeedSubscriptionRequest 

func (c *EC2) DescribeSpotDatafeedSubscriptionRequest(input *DescribeSpotDatafeedSubscriptionInput) (req *request.Request, output *DescribeSpotDatafeedSubscriptionOutput)

DescribeSpotDatafeedSubscriptionRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotDatafeedSubscription operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotDatafeedSubscription method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotDatafeedSubscriptionRequest method.
req, resp := client.DescribeSpotDatafeedSubscriptionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotFleetInstances 

func (c *EC2) DescribeSpotFleetInstances(input *DescribeSpotFleetInstancesInput) (*DescribeSpotFleetInstancesOutput, error)

Describes the running instances for the specified Spot fleet.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotFleetInstancesInput{
		SpotFleetRequestId: aws.String("String"), // Required
		DryRun:             aws.Bool(true),
		MaxResults:         aws.Int64(1),
		NextToken:          aws.String("String"),
	}
	resp, err := svc.DescribeSpotFleetInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotFleetInstancesRequest 

func (c *EC2) DescribeSpotFleetInstancesRequest(input *DescribeSpotFleetInstancesInput) (req *request.Request, output *DescribeSpotFleetInstancesOutput)

DescribeSpotFleetInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotFleetInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotFleetInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotFleetInstancesRequest method.
req, resp := client.DescribeSpotFleetInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotFleetRequestHistory 

func (c *EC2) DescribeSpotFleetRequestHistory(input *DescribeSpotFleetRequestHistoryInput) (*DescribeSpotFleetRequestHistoryOutput, error)

Describes the events for the specified Spot fleet request during the specified time.

Spot fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotFleetRequestHistoryInput{
		SpotFleetRequestId: aws.String("String"), // Required
		StartTime:          aws.Time(time.Now()), // Required
		DryRun:             aws.Bool(true),
		EventType:          aws.String("EventType"),
		MaxResults:         aws.Int64(1),
		NextToken:          aws.String("String"),
	}
	resp, err := svc.DescribeSpotFleetRequestHistory(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotFleetRequestHistoryRequest 

func (c *EC2) DescribeSpotFleetRequestHistoryRequest(input *DescribeSpotFleetRequestHistoryInput) (req *request.Request, output *DescribeSpotFleetRequestHistoryOutput)

DescribeSpotFleetRequestHistoryRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotFleetRequestHistory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotFleetRequestHistory method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotFleetRequestHistoryRequest method.
req, resp := client.DescribeSpotFleetRequestHistoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotFleetRequests 

func (c *EC2) DescribeSpotFleetRequests(input *DescribeSpotFleetRequestsInput) (*DescribeSpotFleetRequestsOutput, error)

Describes your Spot fleet requests.

Spot fleet requests are deleted 48 hours after they are canceled and their instances are terminated.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotFleetRequestsInput{
		DryRun:     aws.Bool(true),
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		SpotFleetRequestIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSpotFleetRequests(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotFleetRequestsPages added in v1.1.33 

func (c *EC2) DescribeSpotFleetRequestsPages(input *DescribeSpotFleetRequestsInput, fn func(p *DescribeSpotFleetRequestsOutput, lastPage bool) (shouldContinue bool)) error

DescribeSpotFleetRequestsPages iterates over the pages of a DescribeSpotFleetRequests operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeSpotFleetRequests method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeSpotFleetRequests operation.
pageNum := 0
err := client.DescribeSpotFleetRequestsPages(params,
    func(page *DescribeSpotFleetRequestsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeSpotFleetRequestsRequest 

func (c *EC2) DescribeSpotFleetRequestsRequest(input *DescribeSpotFleetRequestsInput) (req *request.Request, output *DescribeSpotFleetRequestsOutput)

DescribeSpotFleetRequestsRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotFleetRequests operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotFleetRequests method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotFleetRequestsRequest method.
req, resp := client.DescribeSpotFleetRequestsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotInstanceRequests 

func (c *EC2) DescribeSpotInstanceRequests(input *DescribeSpotInstanceRequestsInput) (*DescribeSpotInstanceRequestsOutput, error)

Describes the Spot instance requests that belong to your account. Spot instances are instances that Amazon EC2 launches when the bid price that you specify exceeds the current Spot price. Amazon EC2 periodically sets the Spot price based on available Spot instance capacity and current Spot instance requests. For more information, see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) in the Amazon Elastic Compute Cloud User Guide.

You can use DescribeSpotInstanceRequests to find a running Spot instance by examining the response. If the status of the Spot instance is fulfilled, the instance ID appears in the response and contains the identifier of the instance. Alternatively, you can use DescribeInstances with a filter to look for instances where the instance lifecycle is spot.

Spot instance requests are deleted 4 hours after they are canceled and their instances are terminated.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotInstanceRequestsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		SpotInstanceRequestIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSpotInstanceRequests(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotInstanceRequestsRequest 

func (c *EC2) DescribeSpotInstanceRequestsRequest(input *DescribeSpotInstanceRequestsInput) (req *request.Request, output *DescribeSpotInstanceRequestsOutput)

DescribeSpotInstanceRequestsRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotInstanceRequests operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotInstanceRequests method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotInstanceRequestsRequest method.
req, resp := client.DescribeSpotInstanceRequestsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSpotPriceHistory 

func (c *EC2) DescribeSpotPriceHistory(input *DescribeSpotPriceHistoryInput) (*DescribeSpotPriceHistoryOutput, error)

Describes the Spot price history. The prices returned are listed in chronological order, from the oldest to the most recent, for up to the past 90 days. For more information, see Spot Instance Pricing History (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-spot-instances-history.html) in the Amazon Elastic Compute Cloud User Guide.

When you specify a start and end time, this operation returns the prices of the instance types within the time range that you specified and the time when the price changed. The price is valid within the time period that you specified; the response merely indicates the last time that the price changed.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSpotPriceHistoryInput{
		AvailabilityZone: aws.String("String"),
		DryRun:           aws.Bool(true),
		EndTime:          aws.Time(time.Now()),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		InstanceTypes: []*string{
			aws.String("InstanceType"), // Required
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		ProductDescriptions: []*string{
			aws.String("String"), // Required
			// More values...
		},
		StartTime: aws.Time(time.Now()),
	}
	resp, err := svc.DescribeSpotPriceHistory(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSpotPriceHistoryPages 

func (c *EC2) DescribeSpotPriceHistoryPages(input *DescribeSpotPriceHistoryInput, fn func(p *DescribeSpotPriceHistoryOutput, lastPage bool) (shouldContinue bool)) error

DescribeSpotPriceHistoryPages iterates over the pages of a DescribeSpotPriceHistory operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeSpotPriceHistory method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeSpotPriceHistory operation.
pageNum := 0
err := client.DescribeSpotPriceHistoryPages(params,
    func(page *DescribeSpotPriceHistoryOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeSpotPriceHistoryRequest 

func (c *EC2) DescribeSpotPriceHistoryRequest(input *DescribeSpotPriceHistoryInput) (req *request.Request, output *DescribeSpotPriceHistoryOutput)

DescribeSpotPriceHistoryRequest generates a "aws/request.Request" representing the client's request for the DescribeSpotPriceHistory operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSpotPriceHistory method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSpotPriceHistoryRequest method.
req, resp := client.DescribeSpotPriceHistoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeStaleSecurityGroups added in v1.1.26 

func (c *EC2) DescribeStaleSecurityGroups(input *DescribeStaleSecurityGroupsInput) (*DescribeStaleSecurityGroupsOutput, error)

[EC2-VPC only] Describes the stale security group rules for security groups in a specified VPC. Rules are stale when they reference a deleted security group in a peer VPC, or a security group in a peer VPC for which the VPC peering connection has been deleted.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeStaleSecurityGroupsInput{
		VpcId:      aws.String("String"), // Required
		DryRun:     aws.Bool(true),
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
	}
	resp, err := svc.DescribeStaleSecurityGroups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeStaleSecurityGroupsRequest added in v1.1.26 

func (c *EC2) DescribeStaleSecurityGroupsRequest(input *DescribeStaleSecurityGroupsInput) (req *request.Request, output *DescribeStaleSecurityGroupsOutput)

DescribeStaleSecurityGroupsRequest generates a "aws/request.Request" representing the client's request for the DescribeStaleSecurityGroups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeStaleSecurityGroups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeStaleSecurityGroupsRequest method.
req, resp := client.DescribeStaleSecurityGroupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeSubnets 

func (c *EC2) DescribeSubnets(input *DescribeSubnetsInput) (*DescribeSubnetsOutput, error)

Describes one or more of your subnets.

For more information about subnets, see Your VPC and Subnets (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Subnets.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeSubnetsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		SubnetIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeSubnets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeSubnetsRequest 

func (c *EC2) DescribeSubnetsRequest(input *DescribeSubnetsInput) (req *request.Request, output *DescribeSubnetsOutput)

DescribeSubnetsRequest generates a "aws/request.Request" representing the client's request for the DescribeSubnets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSubnets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSubnetsRequest method.
req, resp := client.DescribeSubnetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeTags 

func (c *EC2) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

Describes one or more of the tags for your EC2 resources.

For more information about tags, see Tagging Your Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeTagsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeTagsPages added in v0.10.4 

func (c *EC2) DescribeTagsPages(input *DescribeTagsInput, fn func(p *DescribeTagsOutput, lastPage bool) (shouldContinue bool)) error

DescribeTagsPages iterates over the pages of a DescribeTags operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeTags method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeTags operation.
pageNum := 0
err := client.DescribeTagsPages(params,
    func(page *DescribeTagsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeTagsRequest 

func (c *EC2) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a "aws/request.Request" representing the client's request for the DescribeTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTagsRequest method.
req, resp := client.DescribeTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVolumeAttribute 

func (c *EC2) DescribeVolumeAttribute(input *DescribeVolumeAttributeInput) (*DescribeVolumeAttributeOutput, error)

Describes the specified attribute of the specified volume. You can specify only one attribute at a time.

For more information about EBS volumes, see Amazon EBS Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVolumeAttributeInput{
		VolumeId:  aws.String("String"), // Required
		Attribute: aws.String("VolumeAttributeName"),
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.DescribeVolumeAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVolumeAttributeRequest 

func (c *EC2) DescribeVolumeAttributeRequest(input *DescribeVolumeAttributeInput) (req *request.Request, output *DescribeVolumeAttributeOutput)

DescribeVolumeAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeVolumeAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVolumeAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVolumeAttributeRequest method.
req, resp := client.DescribeVolumeAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVolumeStatus 

func (c *EC2) DescribeVolumeStatus(input *DescribeVolumeStatusInput) (*DescribeVolumeStatusOutput, error)

Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event.

The DescribeVolumeStatus operation provides the following information about the specified volumes: 

Status: Reflects the current status of the volume. The possible values

are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks may still be taking place on your volume at the time. We recommend that you retry the request. For more information on volume status, see Monitoring the Status of Your Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-volume-status.html). 

Events: Reflect the cause of a volume status and may require you to take

action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and may have inconsistent data. 

Actions: Reflect the actions you may have to take in response to an event.

For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. 

Volume status is based on the volume status checks, and does not reflect

the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVolumeStatusInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		VolumeIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVolumeStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVolumeStatusPages 

func (c *EC2) DescribeVolumeStatusPages(input *DescribeVolumeStatusInput, fn func(p *DescribeVolumeStatusOutput, lastPage bool) (shouldContinue bool)) error

DescribeVolumeStatusPages iterates over the pages of a DescribeVolumeStatus operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeVolumeStatus method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeVolumeStatus operation.
pageNum := 0
err := client.DescribeVolumeStatusPages(params,
    func(page *DescribeVolumeStatusOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeVolumeStatusRequest 

func (c *EC2) DescribeVolumeStatusRequest(input *DescribeVolumeStatusInput) (req *request.Request, output *DescribeVolumeStatusOutput)

DescribeVolumeStatusRequest generates a "aws/request.Request" representing the client's request for the DescribeVolumeStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVolumeStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVolumeStatusRequest method.
req, resp := client.DescribeVolumeStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVolumes 

func (c *EC2) DescribeVolumes(input *DescribeVolumesInput) (*DescribeVolumesOutput, error)

Describes the specified EBS volumes.

If you are describing a long list of volumes, you can paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeVolumes request to retrieve the remaining results.

For more information about EBS volumes, see Amazon EBS Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumes.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVolumesInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		VolumeIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVolumes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVolumesPages 

func (c *EC2) DescribeVolumesPages(input *DescribeVolumesInput, fn func(p *DescribeVolumesOutput, lastPage bool) (shouldContinue bool)) error

DescribeVolumesPages iterates over the pages of a DescribeVolumes operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeVolumes method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeVolumes operation.
pageNum := 0
err := client.DescribeVolumesPages(params,
    func(page *DescribeVolumesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*EC2) DescribeVolumesRequest 

func (c *EC2) DescribeVolumesRequest(input *DescribeVolumesInput) (req *request.Request, output *DescribeVolumesOutput)

DescribeVolumesRequest generates a "aws/request.Request" representing the client's request for the DescribeVolumes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVolumes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVolumesRequest method.
req, resp := client.DescribeVolumesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcAttribute added in v0.9.5 

func (c *EC2) DescribeVpcAttribute(input *DescribeVpcAttributeInput) (*DescribeVpcAttributeOutput, error)

Describes the specified attribute of the specified VPC. You can specify only one attribute at a time.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcAttributeInput{
		Attribute: aws.String("VpcAttributeName"), // Required
		VpcId:     aws.String("String"),           // Required
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.DescribeVpcAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcAttributeRequest added in v0.9.5 

func (c *EC2) DescribeVpcAttributeRequest(input *DescribeVpcAttributeInput) (req *request.Request, output *DescribeVpcAttributeOutput)

DescribeVpcAttributeRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcAttributeRequest method.
req, resp := client.DescribeVpcAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (c *EC2) DescribeVpcClassicLink(input *DescribeVpcClassicLinkInput) (*DescribeVpcClassicLinkOutput, error)

Describes the ClassicLink status of one or more VPCs.

func (*EC2) DescribeVpcClassicLinkDnsSupport added in v1.0.8 

func (c *EC2) DescribeVpcClassicLinkDnsSupport(input *DescribeVpcClassicLinkDnsSupportInput) (*DescribeVpcClassicLinkDnsSupportOutput, error)

Describes the ClassicLink DNS support status of one or more VPCs. If enabled, the DNS hostname of a linked EC2-Classic instance resolves to its private IP address when addressed from an instance in the VPC to which it's linked. Similarly, the DNS hostname of an instance in a VPC resolves to its private IP address when addressed from a linked EC2-Classic instance. For more information about ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcClassicLinkDnsSupportInput{
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		VpcIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpcClassicLinkDnsSupport(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcClassicLinkDnsSupportRequest added in v1.0.8 

func (c *EC2) DescribeVpcClassicLinkDnsSupportRequest(input *DescribeVpcClassicLinkDnsSupportInput) (req *request.Request, output *DescribeVpcClassicLinkDnsSupportOutput)

DescribeVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcClassicLinkDnsSupport operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcClassicLinkDnsSupport method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcClassicLinkDnsSupportRequest method.
req, resp := client.DescribeVpcClassicLinkDnsSupportRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcClassicLinkRequest added in v0.9.5 

func (c *EC2) DescribeVpcClassicLinkRequest(input *DescribeVpcClassicLinkInput) (req *request.Request, output *DescribeVpcClassicLinkOutput)

DescribeVpcClassicLinkRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcClassicLink operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcClassicLink method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcClassicLinkRequest method.
req, resp := client.DescribeVpcClassicLinkRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcEndpointServices added in v0.9.5 

func (c *EC2) DescribeVpcEndpointServices(input *DescribeVpcEndpointServicesInput) (*DescribeVpcEndpointServicesOutput, error)

Describes all supported AWS services that can be specified when creating a VPC endpoint.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcEndpointServicesInput{
		DryRun:     aws.Bool(true),
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
	}
	resp, err := svc.DescribeVpcEndpointServices(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcEndpointServicesRequest added in v0.9.5 

func (c *EC2) DescribeVpcEndpointServicesRequest(input *DescribeVpcEndpointServicesInput) (req *request.Request, output *DescribeVpcEndpointServicesOutput)

DescribeVpcEndpointServicesRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcEndpointServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcEndpointServices method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcEndpointServicesRequest method.
req, resp := client.DescribeVpcEndpointServicesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcEndpoints added in v0.9.5 

func (c *EC2) DescribeVpcEndpoints(input *DescribeVpcEndpointsInput) (*DescribeVpcEndpointsOutput, error)

Describes one or more of your VPC endpoints.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcEndpointsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("String"),
		VpcEndpointIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpcEndpoints(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcEndpointsRequest added in v0.9.5 

func (c *EC2) DescribeVpcEndpointsRequest(input *DescribeVpcEndpointsInput) (req *request.Request, output *DescribeVpcEndpointsOutput)

DescribeVpcEndpointsRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcEndpoints operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcEndpoints method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcEndpointsRequest method.
req, resp := client.DescribeVpcEndpointsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcPeeringConnections added in v0.9.5 

func (c *EC2) DescribeVpcPeeringConnections(input *DescribeVpcPeeringConnectionsInput) (*DescribeVpcPeeringConnectionsOutput, error)

Describes one or more of your VPC peering connections.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcPeeringConnectionsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		VpcPeeringConnectionIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpcPeeringConnections(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcPeeringConnectionsRequest added in v0.9.5 

func (c *EC2) DescribeVpcPeeringConnectionsRequest(input *DescribeVpcPeeringConnectionsInput) (req *request.Request, output *DescribeVpcPeeringConnectionsOutput)

DescribeVpcPeeringConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcPeeringConnections operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcPeeringConnections method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcPeeringConnectionsRequest method.
req, resp := client.DescribeVpcPeeringConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpcs added in v0.9.5 

func (c *EC2) DescribeVpcs(input *DescribeVpcsInput) (*DescribeVpcsOutput, error)

Describes one or more of your VPCs.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpcsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		VpcIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpcs(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpcsRequest added in v0.9.5 

func (c *EC2) DescribeVpcsRequest(input *DescribeVpcsInput) (req *request.Request, output *DescribeVpcsOutput)

DescribeVpcsRequest generates a "aws/request.Request" representing the client's request for the DescribeVpcs operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpcs method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpcsRequest method.
req, resp := client.DescribeVpcsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpnConnections added in v0.9.5 

func (c *EC2) DescribeVpnConnections(input *DescribeVpnConnectionsInput) (*DescribeVpnConnectionsOutput, error)

Describes one or more of your VPN connections.

For more information about VPN connections, see Adding a Hardware Virtual Private Gateway to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpnConnectionsInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		VpnConnectionIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpnConnections(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpnConnectionsRequest added in v0.9.5 

func (c *EC2) DescribeVpnConnectionsRequest(input *DescribeVpnConnectionsInput) (req *request.Request, output *DescribeVpnConnectionsOutput)

DescribeVpnConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeVpnConnections operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpnConnections method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpnConnectionsRequest method.
req, resp := client.DescribeVpnConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DescribeVpnGateways added in v0.9.5 

func (c *EC2) DescribeVpnGateways(input *DescribeVpnGatewaysInput) (*DescribeVpnGatewaysOutput, error)

Describes one or more of your virtual private gateways.

For more information about virtual private gateways, see Adding an IPsec Hardware VPN to Your VPC (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DescribeVpnGatewaysInput{
		DryRun: aws.Bool(true),
		Filters: []*ec2.Filter{
			{ // Required
				Name: aws.String("String"),
				Values: []*string{
					aws.String("String"), // Required
					// More values...
				},
			},
			// More values...
		},
		VpnGatewayIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVpnGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DescribeVpnGatewaysRequest added in v0.9.5 

func (c *EC2) DescribeVpnGatewaysRequest(input *DescribeVpnGatewaysInput) (req *request.Request, output *DescribeVpnGatewaysOutput)

DescribeVpnGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeVpnGateways operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVpnGateways method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeVpnGatewaysRequest method.
req, resp := client.DescribeVpnGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DetachClassicLinkVpc added in v0.9.5 

func (c *EC2) DetachClassicLinkVpc(input *DetachClassicLinkVpcInput) (*DetachClassicLinkVpcOutput, error)

Unlinks (detaches) a linked EC2-Classic instance from a VPC. After the instance has been unlinked, the VPC security groups are no longer associated with it. An instance is automatically unlinked from a VPC when it's stopped.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DetachClassicLinkVpcInput{
		InstanceId: aws.String("String"), // Required
		VpcId:      aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.DetachClassicLinkVpc(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DetachClassicLinkVpcRequest added in v0.9.5 

func (c *EC2) DetachClassicLinkVpcRequest(input *DetachClassicLinkVpcInput) (req *request.Request, output *DetachClassicLinkVpcOutput)

DetachClassicLinkVpcRequest generates a "aws/request.Request" representing the client's request for the DetachClassicLinkVpc operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachClassicLinkVpc method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DetachClassicLinkVpcRequest method.
req, resp := client.DetachClassicLinkVpcRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DetachInternetGateway 

func (c *EC2) DetachInternetGateway(input *DetachInternetGatewayInput) (*DetachInternetGatewayOutput, error)

Detaches an Internet gateway from a VPC, disabling connectivity between the Internet and the VPC. The VPC must not contain any running instances with Elastic IP addresses.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DetachInternetGatewayInput{
		InternetGatewayId: aws.String("String"), // Required
		VpcId:             aws.String("String"), // Required
		DryRun:            aws.Bool(true),
	}
	resp, err := svc.DetachInternetGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DetachInternetGatewayRequest 

func (c *EC2) DetachInternetGatewayRequest(input *DetachInternetGatewayInput) (req *request.Request, output *DetachInternetGatewayOutput)

DetachInternetGatewayRequest generates a "aws/request.Request" representing the client's request for the DetachInternetGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachInternetGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DetachInternetGatewayRequest method.
req, resp := client.DetachInternetGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DetachNetworkInterface 

func (c *EC2) DetachNetworkInterface(input *DetachNetworkInterfaceInput) (*DetachNetworkInterfaceOutput, error)

Detaches a network interface from an instance.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DetachNetworkInterfaceInput{
		AttachmentId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
		Force:        aws.Bool(true),
	}
	resp, err := svc.DetachNetworkInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DetachNetworkInterfaceRequest 

func (c *EC2) DetachNetworkInterfaceRequest(input *DetachNetworkInterfaceInput) (req *request.Request, output *DetachNetworkInterfaceOutput)

DetachNetworkInterfaceRequest generates a "aws/request.Request" representing the client's request for the DetachNetworkInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachNetworkInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DetachNetworkInterfaceRequest method.
req, resp := client.DetachNetworkInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DetachVolume 

func (c *EC2) DetachVolume(input *DetachVolumeInput) (*VolumeAttachment, error)

Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first.

When a volume with an AWS Marketplace product code is detached from an instance, the product code is no longer associated with the instance.

For more information, see Detaching an Amazon EBS Volume (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-detaching-volume.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DetachVolumeInput{
		VolumeId:   aws.String("String"), // Required
		Device:     aws.String("String"),
		DryRun:     aws.Bool(true),
		Force:      aws.Bool(true),
		InstanceId: aws.String("String"),
	}
	resp, err := svc.DetachVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DetachVolumeRequest 

func (c *EC2) DetachVolumeRequest(input *DetachVolumeInput) (req *request.Request, output *VolumeAttachment)

DetachVolumeRequest generates a "aws/request.Request" representing the client's request for the DetachVolume operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachVolume method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DetachVolumeRequest method.
req, resp := client.DetachVolumeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DetachVpnGateway added in v0.9.5 

func (c *EC2) DetachVpnGateway(input *DetachVpnGatewayInput) (*DetachVpnGatewayOutput, error)

Detaches a virtual private gateway from a VPC. You do this if you're planning to turn off the VPC and not use it anymore. You can confirm a virtual private gateway has been completely detached from a VPC by describing the virtual private gateway (any attachments to the virtual private gateway are also described).

You must wait for the attachment's state to switch to detached before you can delete the VPC or attach a different VPC to the virtual private gateway.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DetachVpnGatewayInput{
		VpcId:        aws.String("String"), // Required
		VpnGatewayId: aws.String("String"), // Required
		DryRun:       aws.Bool(true),
	}
	resp, err := svc.DetachVpnGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DetachVpnGatewayRequest added in v0.9.5 

func (c *EC2) DetachVpnGatewayRequest(input *DetachVpnGatewayInput) (req *request.Request, output *DetachVpnGatewayOutput)

DetachVpnGatewayRequest generates a "aws/request.Request" representing the client's request for the DetachVpnGateway operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DetachVpnGateway method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DetachVpnGatewayRequest method.
req, resp := client.DetachVpnGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DisableVgwRoutePropagation added in v0.9.5 

func (c *EC2) DisableVgwRoutePropagation(input *DisableVgwRoutePropagationInput) (*DisableVgwRoutePropagationOutput, error)

Disables a virtual private gateway (VGW) from propagating routes to a specified route table of a VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DisableVgwRoutePropagationInput{
		GatewayId:    aws.String("String"), // Required
		RouteTableId: aws.String("String"), // Required
	}
	resp, err := svc.DisableVgwRoutePropagation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DisableVgwRoutePropagationRequest added in v0.9.5 

func (c *EC2) DisableVgwRoutePropagationRequest(input *DisableVgwRoutePropagationInput) (req *request.Request, output *DisableVgwRoutePropagationOutput)

DisableVgwRoutePropagationRequest generates a "aws/request.Request" representing the client's request for the DisableVgwRoutePropagation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableVgwRoutePropagation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisableVgwRoutePropagationRequest method.
req, resp := client.DisableVgwRoutePropagationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (c *EC2) DisableVpcClassicLink(input *DisableVpcClassicLinkInput) (*DisableVpcClassicLinkOutput, error)

Disables ClassicLink for a VPC. You cannot disable ClassicLink for a VPC that has EC2-Classic instances linked to it.

func (*EC2) DisableVpcClassicLinkDnsSupport added in v1.0.8 

func (c *EC2) DisableVpcClassicLinkDnsSupport(input *DisableVpcClassicLinkDnsSupportInput) (*DisableVpcClassicLinkDnsSupportOutput, error)

Disables ClassicLink DNS support for a VPC. If disabled, DNS hostnames resolve to public IP addresses when addressed between a linked EC2-Classic instance and instances in the VPC to which it's linked. For more information about ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DisableVpcClassicLinkDnsSupportInput{
		VpcId: aws.String("String"),
	}
	resp, err := svc.DisableVpcClassicLinkDnsSupport(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DisableVpcClassicLinkDnsSupportRequest added in v1.0.8 

func (c *EC2) DisableVpcClassicLinkDnsSupportRequest(input *DisableVpcClassicLinkDnsSupportInput) (req *request.Request, output *DisableVpcClassicLinkDnsSupportOutput)

DisableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the client's request for the DisableVpcClassicLinkDnsSupport operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableVpcClassicLinkDnsSupport method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisableVpcClassicLinkDnsSupportRequest method.
req, resp := client.DisableVpcClassicLinkDnsSupportRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DisableVpcClassicLinkRequest added in v0.9.5 

func (c *EC2) DisableVpcClassicLinkRequest(input *DisableVpcClassicLinkInput) (req *request.Request, output *DisableVpcClassicLinkOutput)

DisableVpcClassicLinkRequest generates a "aws/request.Request" representing the client's request for the DisableVpcClassicLink operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableVpcClassicLink method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisableVpcClassicLinkRequest method.
req, resp := client.DisableVpcClassicLinkRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DisassociateAddress 

func (c *EC2) DisassociateAddress(input *DisassociateAddressInput) (*DisassociateAddressOutput, error)

Disassociates an Elastic IP address from the instance or network interface it's associated with.

An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html) in the Amazon Elastic Compute Cloud User Guide.

This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DisassociateAddressInput{
		AssociationId: aws.String("String"),
		DryRun:        aws.Bool(true),
		PublicIp:      aws.String("String"),
	}
	resp, err := svc.DisassociateAddress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DisassociateAddressRequest 

func (c *EC2) DisassociateAddressRequest(input *DisassociateAddressInput) (req *request.Request, output *DisassociateAddressOutput)

DisassociateAddressRequest generates a "aws/request.Request" representing the client's request for the DisassociateAddress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateAddress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisassociateAddressRequest method.
req, resp := client.DisassociateAddressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) DisassociateRouteTable 

func (c *EC2) DisassociateRouteTable(input *DisassociateRouteTableInput) (*DisassociateRouteTableOutput, error)

Disassociates a subnet from a route table.

After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.DisassociateRouteTableInput{
		AssociationId: aws.String("String"), // Required
		DryRun:        aws.Bool(true),
	}
	resp, err := svc.DisassociateRouteTable(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) DisassociateRouteTableRequest 

func (c *EC2) DisassociateRouteTableRequest(input *DisassociateRouteTableInput) (req *request.Request, output *DisassociateRouteTableOutput)

DisassociateRouteTableRequest generates a "aws/request.Request" representing the client's request for the DisassociateRouteTable operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateRouteTable method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DisassociateRouteTableRequest method.
req, resp := client.DisassociateRouteTableRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) EnableVgwRoutePropagation added in v0.9.5 

func (c *EC2) EnableVgwRoutePropagation(input *EnableVgwRoutePropagationInput) (*EnableVgwRoutePropagationOutput, error)

Enables a virtual private gateway (VGW) to propagate routes to the specified route table of a VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.EnableVgwRoutePropagationInput{
		GatewayId:    aws.String("String"), // Required
		RouteTableId: aws.String("String"), // Required
	}
	resp, err := svc.EnableVgwRoutePropagation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) EnableVgwRoutePropagationRequest added in v0.9.5 

func (c *EC2) EnableVgwRoutePropagationRequest(input *EnableVgwRoutePropagationInput) (req *request.Request, output *EnableVgwRoutePropagationOutput)

EnableVgwRoutePropagationRequest generates a "aws/request.Request" representing the client's request for the EnableVgwRoutePropagation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableVgwRoutePropagation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableVgwRoutePropagationRequest method.
req, resp := client.EnableVgwRoutePropagationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) EnableVolumeIO 

func (c *EC2) EnableVolumeIO(input *EnableVolumeIOInput) (*EnableVolumeIOOutput, error)

Enables I/O operations for a volume that had I/O operations disabled because the data on the volume was potentially inconsistent.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.EnableVolumeIOInput{
		VolumeId: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.EnableVolumeIO(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) EnableVolumeIORequest 

func (c *EC2) EnableVolumeIORequest(input *EnableVolumeIOInput) (req *request.Request, output *EnableVolumeIOOutput)

EnableVolumeIORequest generates a "aws/request.Request" representing the client's request for the EnableVolumeIO operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableVolumeIO method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableVolumeIORequest method.
req, resp := client.EnableVolumeIORequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (c *EC2) EnableVpcClassicLink(input *EnableVpcClassicLinkInput) (*EnableVpcClassicLinkOutput, error)

Enables a VPC for ClassicLink. You can then link EC2-Classic instances to your ClassicLink-enabled VPC to allow communication over private IP addresses. You cannot enable your VPC for ClassicLink if any of your VPC's route tables have existing routes for address ranges within the 10.0.0.0/8 IP address range, excluding local routes for VPCs in the 10.0.0.0/16 and 10.1.0.0/16 IP address ranges. For more information, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) in the Amazon Elastic Compute Cloud User Guide.

func (*EC2) EnableVpcClassicLinkDnsSupport added in v1.0.8 

func (c *EC2) EnableVpcClassicLinkDnsSupport(input *EnableVpcClassicLinkDnsSupportInput) (*EnableVpcClassicLinkDnsSupportOutput, error)

Enables a VPC to support DNS hostname resolution for ClassicLink. If enabled, the DNS hostname of a linked EC2-Classic instance resolves to its private IP address when addressed from an instance in the VPC to which it's linked. Similarly, the DNS hostname of an instance in a VPC resolves to its private IP address when addressed from a linked EC2-Classic instance. For more information about ClassicLink, see ClassicLink (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/vpc-classiclink.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.EnableVpcClassicLinkDnsSupportInput{
		VpcId: aws.String("String"),
	}
	resp, err := svc.EnableVpcClassicLinkDnsSupport(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) EnableVpcClassicLinkDnsSupportRequest added in v1.0.8 

func (c *EC2) EnableVpcClassicLinkDnsSupportRequest(input *EnableVpcClassicLinkDnsSupportInput) (req *request.Request, output *EnableVpcClassicLinkDnsSupportOutput)

EnableVpcClassicLinkDnsSupportRequest generates a "aws/request.Request" representing the client's request for the EnableVpcClassicLinkDnsSupport operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableVpcClassicLinkDnsSupport method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableVpcClassicLinkDnsSupportRequest method.
req, resp := client.EnableVpcClassicLinkDnsSupportRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) EnableVpcClassicLinkRequest added in v0.9.5 

func (c *EC2) EnableVpcClassicLinkRequest(input *EnableVpcClassicLinkInput) (req *request.Request, output *EnableVpcClassicLinkOutput)

EnableVpcClassicLinkRequest generates a "aws/request.Request" representing the client's request for the EnableVpcClassicLink operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableVpcClassicLink method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the EnableVpcClassicLinkRequest method.
req, resp := client.EnableVpcClassicLinkRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) GetConsoleOutput 

func (c *EC2) GetConsoleOutput(input *GetConsoleOutputInput) (*GetConsoleOutputOutput, error)

Gets the console output for the specified instance.

Instances do not have a physical monitor through which you can view their console output. They also lack physical controls that allow you to power up, reboot, or shut them down. To allow these actions, we provide them through the Amazon EC2 API and command line interface.

Instance console output is buffered and posted shortly after instance boot, reboot, and termination. Amazon EC2 preserves the most recent 64 KB output which is available for at least one hour after the most recent post.

For Linux instances, the instance console output displays the exact console output that would normally be displayed on a physical monitor attached to a computer. This output is buffered because the instance produces it and then posts it to a store where the instance's owner can retrieve it.

For Windows instances, the instance console output includes output from the EC2Config service.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.GetConsoleOutputInput{
		InstanceId: aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.GetConsoleOutput(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) GetConsoleOutputRequest 

func (c *EC2) GetConsoleOutputRequest(input *GetConsoleOutputInput) (req *request.Request, output *GetConsoleOutputOutput)

GetConsoleOutputRequest generates a "aws/request.Request" representing the client's request for the GetConsoleOutput operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetConsoleOutput method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetConsoleOutputRequest method.
req, resp := client.GetConsoleOutputRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) GetConsoleScreenshot added in v1.1.30 

func (c *EC2) GetConsoleScreenshot(input *GetConsoleScreenshotInput) (*GetConsoleScreenshotOutput, error)

Retrieve a JPG-format screenshot of a running instance to help with troubleshooting.

The returned content is Base64-encoded.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.GetConsoleScreenshotInput{
		InstanceId: aws.String("String"), // Required
		DryRun:     aws.Bool(true),
		WakeUp:     aws.Bool(true),
	}
	resp, err := svc.GetConsoleScreenshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) GetConsoleScreenshotRequest added in v1.1.30 

func (c *EC2) GetConsoleScreenshotRequest(input *GetConsoleScreenshotInput) (req *request.Request, output *GetConsoleScreenshotOutput)

GetConsoleScreenshotRequest generates a "aws/request.Request" representing the client's request for the GetConsoleScreenshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetConsoleScreenshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetConsoleScreenshotRequest method.
req, resp := client.GetConsoleScreenshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) GetHostReservationPurchasePreview added in v1.4.3 

func (c *EC2) GetHostReservationPurchasePreview(input *GetHostReservationPurchasePreviewInput) (*GetHostReservationPurchasePreviewOutput, error)

Preview a reservation purchase with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation.

This is a preview of the PurchaseHostReservation action and does not result in the offering being purchased.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.GetHostReservationPurchasePreviewInput{
		HostIdSet: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		OfferingId: aws.String("String"), // Required
	}
	resp, err := svc.GetHostReservationPurchasePreview(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) GetHostReservationPurchasePreviewRequest added in v1.4.3 

func (c *EC2) GetHostReservationPurchasePreviewRequest(input *GetHostReservationPurchasePreviewInput) (req *request.Request, output *GetHostReservationPurchasePreviewOutput)

GetHostReservationPurchasePreviewRequest generates a "aws/request.Request" representing the client's request for the GetHostReservationPurchasePreview operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetHostReservationPurchasePreview method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetHostReservationPurchasePreviewRequest method.
req, resp := client.GetHostReservationPurchasePreviewRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) GetPasswordData 

func (c *EC2) GetPasswordData(input *GetPasswordDataInput) (*GetPasswordDataOutput, error)

Retrieves the encrypted administrator password for an instance running Windows.

The Windows password is generated at boot if the EC2Config service plugin, Ec2SetPassword, is enabled. This usually only happens the first time an AMI is launched, and then Ec2SetPassword is automatically disabled. The password is not generated for rebundled AMIs unless Ec2SetPassword is enabled before bundling.

The password is encrypted using the key pair that you specified when you launched the instance. You must provide the corresponding key pair file.

Password generation and encryption takes a few moments. We recommend that you wait up to 15 minutes after launching an instance before trying to retrieve the generated password.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.GetPasswordDataInput{
		InstanceId: aws.String("String"), // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.GetPasswordData(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) GetPasswordDataRequest 

func (c *EC2) GetPasswordDataRequest(input *GetPasswordDataInput) (req *request.Request, output *GetPasswordDataOutput)

GetPasswordDataRequest generates a "aws/request.Request" representing the client's request for the GetPasswordData operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetPasswordData method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetPasswordDataRequest method.
req, resp := client.GetPasswordDataRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) GetReservedInstancesExchangeQuote added in v1.4.15 

func (c *EC2) GetReservedInstancesExchangeQuote(input *GetReservedInstancesExchangeQuoteInput) (*GetReservedInstancesExchangeQuoteOutput, error)

Returns details about the values and term of your specified Convertible Reserved Instances. When an offering ID is specified it returns information about whether the exchange is valid and can be performed.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.GetReservedInstancesExchangeQuoteInput{
		ReservedInstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		TargetConfigurations: []*ec2.TargetConfigurationRequest{
			{ // Required
				OfferingId:    aws.String("String"), // Required
				InstanceCount: aws.Int64(1),
			},
			// More values...
		},
	}
	resp, err := svc.GetReservedInstancesExchangeQuote(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) GetReservedInstancesExchangeQuoteRequest added in v1.4.15 

func (c *EC2) GetReservedInstancesExchangeQuoteRequest(input *GetReservedInstancesExchangeQuoteInput) (req *request.Request, output *GetReservedInstancesExchangeQuoteOutput)

GetReservedInstancesExchangeQuoteRequest generates a "aws/request.Request" representing the client's request for the GetReservedInstancesExchangeQuote operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetReservedInstancesExchangeQuote method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the GetReservedInstancesExchangeQuoteRequest method.
req, resp := client.GetReservedInstancesExchangeQuoteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ImportImage 

func (c *EC2) ImportImage(input *ImportImageInput) (*ImportImageOutput, error)

Import single or multi-volume disk images or EBS snapshots into an Amazon Machine Image (AMI). For more information, see Importing a VM as an Image Using VM Import/Export (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html) in the VM Import/Export User Guide.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ImportImageInput{
		Architecture: aws.String("String"),
		ClientData: &ec2.ClientData{
			Comment:     aws.String("String"),
			UploadEnd:   aws.Time(time.Now()),
			UploadSize:  aws.Float64(1.0),
			UploadStart: aws.Time(time.Now()),
		},
		ClientToken: aws.String("String"),
		Description: aws.String("String"),
		DiskContainers: []*ec2.ImageDiskContainer{
			{ // Required
				Description: aws.String("String"),
				DeviceName:  aws.String("String"),
				Format:      aws.String("String"),
				SnapshotId:  aws.String("String"),
				Url:         aws.String("String"),
				UserBucket: &ec2.UserBucket{
					S3Bucket: aws.String("String"),
					S3Key:    aws.String("String"),
				},
			},
			// More values...
		},
		DryRun:      aws.Bool(true),
		Hypervisor:  aws.String("String"),
		LicenseType: aws.String("String"),
		Platform:    aws.String("String"),
		RoleName:    aws.String("String"),
	}
	resp, err := svc.ImportImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ImportImageRequest 

func (c *EC2) ImportImageRequest(input *ImportImageInput) (req *request.Request, output *ImportImageOutput)

ImportImageRequest generates a "aws/request.Request" representing the client's request for the ImportImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ImportImageRequest method.
req, resp := client.ImportImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ImportInstance 

func (c *EC2) ImportInstance(input *ImportInstanceInput) (*ImportInstanceOutput, error)

Creates an import instance task using metadata from the specified disk image. ImportInstance only supports single-volume VMs. To import multi-volume VMs, use ImportImage. For more information, see Importing a Virtual Machine Using the Amazon EC2 CLI (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/ec2-cli-vmimport-export.html).

For information about the import manifest referenced by this API action, see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ImportInstanceInput{
		Platform:    aws.String("PlatformValues"), // Required
		Description: aws.String("String"),
		DiskImages: []*ec2.DiskImage{
			{ // Required
				Description: aws.String("String"),
				Image: &ec2.DiskImageDetail{
					Bytes:             aws.Int64(1),                  // Required
					Format:            aws.String("DiskImageFormat"), // Required
					ImportManifestUrl: aws.String("String"),          // Required
				},
				Volume: &ec2.VolumeDetail{
					Size: aws.Int64(1), // Required
				},
			},
			// More values...
		},
		DryRun: aws.Bool(true),
		LaunchSpecification: &ec2.ImportInstanceLaunchSpecification{
			AdditionalInfo: aws.String("String"),
			Architecture:   aws.String("ArchitectureValues"),
			GroupIds: []*string{
				aws.String("String"), // Required
				// More values...
			},
			GroupNames: []*string{
				aws.String("String"), // Required
				// More values...
			},
			InstanceInitiatedShutdownBehavior: aws.String("ShutdownBehavior"),
			InstanceType:                      aws.String("InstanceType"),
			Monitoring:                        aws.Bool(true),
			Placement: &ec2.Placement{
				Affinity:         aws.String("String"),
				AvailabilityZone: aws.String("String"),
				GroupName:        aws.String("String"),
				HostId:           aws.String("String"),
				Tenancy:          aws.String("Tenancy"),
			},
			PrivateIpAddress: aws.String("String"),
			SubnetId:         aws.String("String"),
			UserData: &ec2.UserData{
				Data: aws.String("String"),
			},
		},
	}
	resp, err := svc.ImportInstance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ImportInstanceRequest 

func (c *EC2) ImportInstanceRequest(input *ImportInstanceInput) (req *request.Request, output *ImportInstanceOutput)

ImportInstanceRequest generates a "aws/request.Request" representing the client's request for the ImportInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ImportInstanceRequest method.
req, resp := client.ImportInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ImportKeyPair 

func (c *EC2) ImportKeyPair(input *ImportKeyPairInput) (*ImportKeyPairOutput, error)

Imports the public key from an RSA key pair that you created with a third-party tool. Compare this with CreateKeyPair, in which AWS creates the key pair and gives the keys to you (AWS keeps a copy of the public key). With ImportKeyPair, you create the key pair and give AWS just the public key. The private key is never transferred between you and AWS.

For more information about key pairs, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ImportKeyPairInput{
		KeyName:           aws.String("String"), // Required
		PublicKeyMaterial: []byte("PAYLOAD"),    // Required
		DryRun:            aws.Bool(true),
	}
	resp, err := svc.ImportKeyPair(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ImportKeyPairRequest 

func (c *EC2) ImportKeyPairRequest(input *ImportKeyPairInput) (req *request.Request, output *ImportKeyPairOutput)

ImportKeyPairRequest generates a "aws/request.Request" representing the client's request for the ImportKeyPair operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportKeyPair method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ImportKeyPairRequest method.
req, resp := client.ImportKeyPairRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ImportSnapshot 

func (c *EC2) ImportSnapshot(input *ImportSnapshotInput) (*ImportSnapshotOutput, error)

Imports a disk into an EBS snapshot.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ImportSnapshotInput{
		ClientData: &ec2.ClientData{
			Comment:     aws.String("String"),
			UploadEnd:   aws.Time(time.Now()),
			UploadSize:  aws.Float64(1.0),
			UploadStart: aws.Time(time.Now()),
		},
		ClientToken: aws.String("String"),
		Description: aws.String("String"),
		DiskContainer: &ec2.SnapshotDiskContainer{
			Description: aws.String("String"),
			Format:      aws.String("String"),
			Url:         aws.String("String"),
			UserBucket: &ec2.UserBucket{
				S3Bucket: aws.String("String"),
				S3Key:    aws.String("String"),
			},
		},
		DryRun:   aws.Bool(true),
		RoleName: aws.String("String"),
	}
	resp, err := svc.ImportSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ImportSnapshotRequest 

func (c *EC2) ImportSnapshotRequest(input *ImportSnapshotInput) (req *request.Request, output *ImportSnapshotOutput)

ImportSnapshotRequest generates a "aws/request.Request" representing the client's request for the ImportSnapshot operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportSnapshot method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ImportSnapshotRequest method.
req, resp := client.ImportSnapshotRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ImportVolume 

func (c *EC2) ImportVolume(input *ImportVolumeInput) (*ImportVolumeOutput, error)

Creates an import volume task using metadata from the specified disk image.For more information, see Importing Disks to Amazon EBS (http://docs.aws.amazon.com/AWSEC2/latest/CommandLineReference/importing-your-volumes-into-amazon-ebs.html).

For information about the import manifest referenced by this API action, see VM Import Manifest (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/manifest.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ImportVolumeInput{
		AvailabilityZone: aws.String("String"), // Required
		Image: &ec2.DiskImageDetail{ // Required
			Bytes:             aws.Int64(1),                  // Required
			Format:            aws.String("DiskImageFormat"), // Required
			ImportManifestUrl: aws.String("String"),          // Required
		},
		Volume: &ec2.VolumeDetail{ // Required
			Size: aws.Int64(1), // Required
		},
		Description: aws.String("String"),
		DryRun:      aws.Bool(true),
	}
	resp, err := svc.ImportVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ImportVolumeRequest 

func (c *EC2) ImportVolumeRequest(input *ImportVolumeInput) (req *request.Request, output *ImportVolumeOutput)

ImportVolumeRequest generates a "aws/request.Request" representing the client's request for the ImportVolume operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ImportVolume method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ImportVolumeRequest method.
req, resp := client.ImportVolumeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyHosts added in v1.0.1 

func (c *EC2) ModifyHosts(input *ModifyHostsInput) (*ModifyHostsOutput, error)

Modify the auto-placement setting of a Dedicated Host. When auto-placement is enabled, AWS will place instances that you launch with a tenancy of host, but without targeting a specific host ID, onto any available Dedicated Host in your account which has auto-placement enabled. When auto-placement is disabled, you need to provide a host ID if you want the instance to launch onto a specific host. If no host ID is provided, the instance will be launched onto a suitable host which has auto-placement enabled.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyHostsInput{
		AutoPlacement: aws.String("AutoPlacement"), // Required
		HostIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.ModifyHosts(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyHostsRequest added in v1.0.1 

func (c *EC2) ModifyHostsRequest(input *ModifyHostsInput) (req *request.Request, output *ModifyHostsOutput)

ModifyHostsRequest generates a "aws/request.Request" representing the client's request for the ModifyHosts operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyHosts method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyHostsRequest method.
req, resp := client.ModifyHostsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyIdFormat added in v1.0.1 

func (c *EC2) ModifyIdFormat(input *ModifyIdFormatInput) (*ModifyIdFormatOutput, error)

Modifies the ID format for the specified resource on a per-region basis. You can specify that resources should receive longer IDs (17-character IDs) when they are created. The following resource types support longer IDs: instance | reservation | snapshot | volume.

This setting applies to the IAM user who makes the request; it does not apply to the entire AWS account. By default, an IAM user defaults to the same settings as the root user. If you're using this action as the root user, then these settings apply to the entire account, unless an IAM user explicitly overrides these settings for themselves. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) in the Amazon Elastic Compute Cloud User Guide.

Resources created with longer IDs are visible to all IAM roles and users, regardless of these settings and provided that they have permission to use the relevant Describe command for the resource type.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyIdFormatInput{
		Resource:   aws.String("String"), // Required
		UseLongIds: aws.Bool(true),       // Required
	}
	resp, err := svc.ModifyIdFormat(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyIdFormatRequest added in v1.0.1 

func (c *EC2) ModifyIdFormatRequest(input *ModifyIdFormatInput) (req *request.Request, output *ModifyIdFormatOutput)

ModifyIdFormatRequest generates a "aws/request.Request" representing the client's request for the ModifyIdFormat operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyIdFormat method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyIdFormatRequest method.
req, resp := client.ModifyIdFormatRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyIdentityIdFormat added in v1.2.0 

func (c *EC2) ModifyIdentityIdFormat(input *ModifyIdentityIdFormatInput) (*ModifyIdentityIdFormatOutput, error)

Modifies the ID format of a resource for a specified IAM user, IAM role, or the root user for an account; or all IAM users, IAM roles, and the root user for an account. You can specify that resources should receive longer IDs (17-character IDs) when they are created.

The following resource types support longer IDs: instance | reservation | snapshot | volume. For more information, see Resource IDs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/resource-ids.html) in the Amazon Elastic Compute Cloud User Guide.

This setting applies to the principal specified in the request; it does not apply to the principal that makes the request.

Resources created with longer IDs are visible to all IAM roles and users, regardless of these settings and provided that they have permission to use the relevant Describe command for the resource type.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyIdentityIdFormatInput{
		PrincipalArn: aws.String("String"), // Required
		Resource:     aws.String("String"), // Required
		UseLongIds:   aws.Bool(true),       // Required
	}
	resp, err := svc.ModifyIdentityIdFormat(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyIdentityIdFormatRequest added in v1.2.0 

func (c *EC2) ModifyIdentityIdFormatRequest(input *ModifyIdentityIdFormatInput) (req *request.Request, output *ModifyIdentityIdFormatOutput)

ModifyIdentityIdFormatRequest generates a "aws/request.Request" representing the client's request for the ModifyIdentityIdFormat operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyIdentityIdFormat method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyIdentityIdFormatRequest method.
req, resp := client.ModifyIdentityIdFormatRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyImageAttribute 

func (c *EC2) ModifyImageAttribute(input *ModifyImageAttributeInput) (*ModifyImageAttributeOutput, error)

Modifies the specified attribute of the specified AMI. You can specify only one attribute at a time. 

AWS Marketplace product codes cannot be modified. Images with an AWS Marketplace

product code cannot be made public. 

The SriovNetSupport enhanced networking attribute cannot be changed using

this command. Instead, enable SriovNetSupport on an instance and create an AMI from the instance. This will result in an image with SriovNetSupport enabled.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyImageAttributeInput{
		ImageId:   aws.String("String"), // Required
		Attribute: aws.String("String"),
		Description: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		DryRun: aws.Bool(true),
		LaunchPermission: &ec2.LaunchPermissionModifications{
			Add: []*ec2.LaunchPermission{
				{ // Required
					Group:  aws.String("PermissionGroup"),
					UserId: aws.String("String"),
				},
				// More values...
			},
			Remove: []*ec2.LaunchPermission{
				{ // Required
					Group:  aws.String("PermissionGroup"),
					UserId: aws.String("String"),
				},
				// More values...
			},
		},
		OperationType: aws.String("OperationType"),
		ProductCodes: []*string{
			aws.String("String"), // Required
			// More values...
		},
		UserGroups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		UserIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		Value: aws.String("String"),
	}
	resp, err := svc.ModifyImageAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyImageAttributeRequest 

func (c *EC2) ModifyImageAttributeRequest(input *ModifyImageAttributeInput) (req *request.Request, output *ModifyImageAttributeOutput)

ModifyImageAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifyImageAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyImageAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyImageAttributeRequest method.
req, resp := client.ModifyImageAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyInstanceAttribute 

func (c *EC2) ModifyInstanceAttribute(input *ModifyInstanceAttributeInput) (*ModifyInstanceAttributeOutput, error)

Modifies the specified attribute of the specified instance. You can specify only one attribute at a time.

To modify some attributes, the instance must be stopped. For more information, see Modifying Attributes of a Stopped Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_ChangingAttributesWhileInstanceStopped.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyInstanceAttributeInput{
		InstanceId: aws.String("String"), // Required
		Attribute:  aws.String("InstanceAttributeName"),
		BlockDeviceMappings: []*ec2.InstanceBlockDeviceMappingSpecification{
			{ // Required
				DeviceName: aws.String("String"),
				Ebs: &ec2.EbsInstanceBlockDeviceSpecification{
					DeleteOnTermination: aws.Bool(true),
					VolumeId:            aws.String("String"),
				},
				NoDevice:    aws.String("String"),
				VirtualName: aws.String("String"),
			},
			// More values...
		},
		DisableApiTermination: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		DryRun: aws.Bool(true),
		EbsOptimized: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		EnaSupport: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		Groups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		InstanceInitiatedShutdownBehavior: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		InstanceType: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		Kernel: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		Ramdisk: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		SourceDestCheck: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		SriovNetSupport: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		UserData: &ec2.BlobAttributeValue{
			Value: []byte("PAYLOAD"),
		},
		Value: aws.String("String"),
	}
	resp, err := svc.ModifyInstanceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyInstanceAttributeRequest 

func (c *EC2) ModifyInstanceAttributeRequest(input *ModifyInstanceAttributeInput) (req *request.Request, output *ModifyInstanceAttributeOutput)

ModifyInstanceAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifyInstanceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyInstanceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyInstanceAttributeRequest method.
req, resp := client.ModifyInstanceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyInstancePlacement added in v1.0.1 

func (c *EC2) ModifyInstancePlacement(input *ModifyInstancePlacementInput) (*ModifyInstancePlacementOutput, error)

Set the instance affinity value for a specific stopped instance and modify the instance tenancy setting.

Instance affinity is disabled by default. When instance affinity is host and it is not associated with a specific Dedicated Host, the next time it is launched it will automatically be associated with the host it lands on. This relationship will persist if the instance is stopped/started, or rebooted.

You can modify the host ID associated with a stopped instance. If a stopped instance has a new host ID association, the instance will target that host when restarted.

You can modify the tenancy of a stopped instance with a tenancy of host or dedicated.

Affinity, hostID, and tenancy are not required parameters, but at least one of them must be specified in the request. Affinity and tenancy can be modified in the same request, but tenancy can only be modified on instances that are stopped.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyInstancePlacementInput{
		InstanceId: aws.String("String"), // Required
		Affinity:   aws.String("Affinity"),
		HostId:     aws.String("String"),
		Tenancy:    aws.String("HostTenancy"),
	}
	resp, err := svc.ModifyInstancePlacement(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyInstancePlacementRequest added in v1.0.1 

func (c *EC2) ModifyInstancePlacementRequest(input *ModifyInstancePlacementInput) (req *request.Request, output *ModifyInstancePlacementOutput)

ModifyInstancePlacementRequest generates a "aws/request.Request" representing the client's request for the ModifyInstancePlacement operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyInstancePlacement method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyInstancePlacementRequest method.
req, resp := client.ModifyInstancePlacementRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyNetworkInterfaceAttribute 

func (c *EC2) ModifyNetworkInterfaceAttribute(input *ModifyNetworkInterfaceAttributeInput) (*ModifyNetworkInterfaceAttributeOutput, error)

Modifies the specified network interface attribute. You can specify only one attribute at a time.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyNetworkInterfaceAttributeInput{
		NetworkInterfaceId: aws.String("String"), // Required
		Attachment: &ec2.NetworkInterfaceAttachmentChanges{
			AttachmentId:        aws.String("String"),
			DeleteOnTermination: aws.Bool(true),
		},
		Description: &ec2.AttributeValue{
			Value: aws.String("String"),
		},
		DryRun: aws.Bool(true),
		Groups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SourceDestCheck: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
	}
	resp, err := svc.ModifyNetworkInterfaceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyNetworkInterfaceAttributeRequest 

func (c *EC2) ModifyNetworkInterfaceAttributeRequest(input *ModifyNetworkInterfaceAttributeInput) (req *request.Request, output *ModifyNetworkInterfaceAttributeOutput)

ModifyNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifyNetworkInterfaceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyNetworkInterfaceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyNetworkInterfaceAttributeRequest method.
req, resp := client.ModifyNetworkInterfaceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyReservedInstances 

func (c *EC2) ModifyReservedInstances(input *ModifyReservedInstancesInput) (*ModifyReservedInstancesOutput, error)

Modifies the Availability Zone, instance count, instance type, or network platform (EC2-Classic or EC2-VPC) of your Standard Reserved Instances. The Reserved Instances to be modified must be identical, except for Availability Zone, network platform, and instance type.

For more information, see Modifying Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-modifying.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyReservedInstancesInput{
		ReservedInstancesIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		TargetConfigurations: []*ec2.ReservedInstancesConfiguration{ // Required
			{ // Required
				AvailabilityZone: aws.String("String"),
				InstanceCount:    aws.Int64(1),
				InstanceType:     aws.String("InstanceType"),
				Platform:         aws.String("String"),
				Scope:            aws.String("scope"),
			},
			// More values...
		},
		ClientToken: aws.String("String"),
	}
	resp, err := svc.ModifyReservedInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyReservedInstancesRequest 

func (c *EC2) ModifyReservedInstancesRequest(input *ModifyReservedInstancesInput) (req *request.Request, output *ModifyReservedInstancesOutput)

ModifyReservedInstancesRequest generates a "aws/request.Request" representing the client's request for the ModifyReservedInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyReservedInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyReservedInstancesRequest method.
req, resp := client.ModifyReservedInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifySnapshotAttribute 

func (c *EC2) ModifySnapshotAttribute(input *ModifySnapshotAttributeInput) (*ModifySnapshotAttributeOutput, error)

Adds or removes permission settings for the specified snapshot. You may add or remove specified AWS account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single API call. If you need to both add and remove account IDs for a snapshot, you must use multiple API calls. 

Encrypted snapshots and snapshots with AWS Marketplace product codes cannot

be made public. Snapshots encrypted with your default CMK cannot be shared with other accounts. 

For more information on modifying snapshot permissions, see Sharing Snapshots

(http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifySnapshotAttributeInput{
		SnapshotId: aws.String("String"), // Required
		Attribute:  aws.String("SnapshotAttributeName"),
		CreateVolumePermission: &ec2.CreateVolumePermissionModifications{
			Add: []*ec2.CreateVolumePermission{
				{ // Required
					Group:  aws.String("PermissionGroup"),
					UserId: aws.String("String"),
				},
				// More values...
			},
			Remove: []*ec2.CreateVolumePermission{
				{ // Required
					Group:  aws.String("PermissionGroup"),
					UserId: aws.String("String"),
				},
				// More values...
			},
		},
		DryRun: aws.Bool(true),
		GroupNames: []*string{
			aws.String("String"), // Required
			// More values...
		},
		OperationType: aws.String("OperationType"),
		UserIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.ModifySnapshotAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifySnapshotAttributeRequest 

func (c *EC2) ModifySnapshotAttributeRequest(input *ModifySnapshotAttributeInput) (req *request.Request, output *ModifySnapshotAttributeOutput)

ModifySnapshotAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifySnapshotAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifySnapshotAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifySnapshotAttributeRequest method.
req, resp := client.ModifySnapshotAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifySpotFleetRequest added in v0.9.10 

func (c *EC2) ModifySpotFleetRequest(input *ModifySpotFleetRequestInput) (*ModifySpotFleetRequestOutput, error)

Modifies the specified Spot fleet request.

While the Spot fleet request is being modified, it is in the modifying state.

To scale up your Spot fleet, increase its target capacity. The Spot fleet launches the additional Spot instances according to the allocation strategy for the Spot fleet request. If the allocation strategy is lowestPrice, the Spot fleet launches instances using the Spot pool with the lowest price. If the allocation strategy is diversified, the Spot fleet distributes the instances across the Spot pools.

To scale down your Spot fleet, decrease its target capacity. First, the Spot fleet cancels any open bids that exceed the new target capacity. You can request that the Spot fleet terminate Spot instances until the size of the fleet no longer exceeds the new target capacity. If the allocation strategy is lowestPrice, the Spot fleet terminates the instances with the highest price per unit. If the allocation strategy is diversified, the Spot fleet terminates instances across the Spot pools. Alternatively, you can request that the Spot fleet keep the fleet at its current size, but not replace any Spot instances that are interrupted or that you terminate manually.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifySpotFleetRequestInput{
		SpotFleetRequestId:              aws.String("String"), // Required
		ExcessCapacityTerminationPolicy: aws.String("ExcessCapacityTerminationPolicy"),
		TargetCapacity:                  aws.Int64(1),
	}
	resp, err := svc.ModifySpotFleetRequest(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifySpotFleetRequestRequest added in v0.9.10 

func (c *EC2) ModifySpotFleetRequestRequest(input *ModifySpotFleetRequestInput) (req *request.Request, output *ModifySpotFleetRequestOutput)

ModifySpotFleetRequestRequest generates a "aws/request.Request" representing the client's request for the ModifySpotFleetRequest operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifySpotFleetRequest method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifySpotFleetRequestRequest method.
req, resp := client.ModifySpotFleetRequestRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifySubnetAttribute 

func (c *EC2) ModifySubnetAttribute(input *ModifySubnetAttributeInput) (*ModifySubnetAttributeOutput, error)

Modifies a subnet attribute.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifySubnetAttributeInput{
		SubnetId: aws.String("String"), // Required
		MapPublicIpOnLaunch: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
	}
	resp, err := svc.ModifySubnetAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifySubnetAttributeRequest 

func (c *EC2) ModifySubnetAttributeRequest(input *ModifySubnetAttributeInput) (req *request.Request, output *ModifySubnetAttributeOutput)

ModifySubnetAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifySubnetAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifySubnetAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifySubnetAttributeRequest method.
req, resp := client.ModifySubnetAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyVolumeAttribute 

func (c *EC2) ModifyVolumeAttribute(input *ModifyVolumeAttributeInput) (*ModifyVolumeAttributeOutput, error)

Modifies a volume attribute.

By default, all I/O operations for the volume are suspended when the data on the volume is determined to be potentially inconsistent, to prevent undetectable, latent data corruption. The I/O access to the volume can be resumed by first enabling I/O access and then checking the data consistency on your volume.

You can change the default behavior to resume I/O operations. We recommend that you change this only for boot volumes or for volumes that are stateless or disposable.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyVolumeAttributeInput{
		VolumeId: aws.String("String"), // Required
		AutoEnableIO: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.ModifyVolumeAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyVolumeAttributeRequest 

func (c *EC2) ModifyVolumeAttributeRequest(input *ModifyVolumeAttributeInput) (req *request.Request, output *ModifyVolumeAttributeOutput)

ModifyVolumeAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifyVolumeAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyVolumeAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyVolumeAttributeRequest method.
req, resp := client.ModifyVolumeAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyVpcAttribute added in v0.9.5 

func (c *EC2) ModifyVpcAttribute(input *ModifyVpcAttributeInput) (*ModifyVpcAttributeOutput, error)

Modifies the specified attribute of the specified VPC.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyVpcAttributeInput{
		VpcId: aws.String("String"), // Required
		EnableDnsHostnames: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
		EnableDnsSupport: &ec2.AttributeBooleanValue{
			Value: aws.Bool(true),
		},
	}
	resp, err := svc.ModifyVpcAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyVpcAttributeRequest added in v0.9.5 

func (c *EC2) ModifyVpcAttributeRequest(input *ModifyVpcAttributeInput) (req *request.Request, output *ModifyVpcAttributeOutput)

ModifyVpcAttributeRequest generates a "aws/request.Request" representing the client's request for the ModifyVpcAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyVpcAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyVpcAttributeRequest method.
req, resp := client.ModifyVpcAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyVpcEndpoint added in v0.9.5 

func (c *EC2) ModifyVpcEndpoint(input *ModifyVpcEndpointInput) (*ModifyVpcEndpointOutput, error)

Modifies attributes of a specified VPC endpoint. You can modify the policy associated with the endpoint, and you can add and remove route tables associated with the endpoint.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyVpcEndpointInput{
		VpcEndpointId: aws.String("String"), // Required
		AddRouteTableIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		DryRun:         aws.Bool(true),
		PolicyDocument: aws.String("String"),
		RemoveRouteTableIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		ResetPolicy: aws.Bool(true),
	}
	resp, err := svc.ModifyVpcEndpoint(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyVpcEndpointRequest added in v0.9.5 

func (c *EC2) ModifyVpcEndpointRequest(input *ModifyVpcEndpointInput) (req *request.Request, output *ModifyVpcEndpointOutput)

ModifyVpcEndpointRequest generates a "aws/request.Request" representing the client's request for the ModifyVpcEndpoint operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyVpcEndpoint method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyVpcEndpointRequest method.
req, resp := client.ModifyVpcEndpointRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ModifyVpcPeeringConnectionOptions added in v1.1.21 

func (c *EC2) ModifyVpcPeeringConnectionOptions(input *ModifyVpcPeeringConnectionOptionsInput) (*ModifyVpcPeeringConnectionOptionsOutput, error)

Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following: 

Enable/disable communication over the peering connection between an EC2-Classic

instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC. 

Enable/disable communication over the peering connection between instances

in your VPC and an EC2-Classic instance that's linked to the peer VPC. 

Enable/disable a local VPC to resolve public DNS hostnames to private

IP addresses when queried from instances in the peer VPC. 

If the peered VPCs are in different accounts, each owner must initiate

a separate request to modify the peering connection options, depending on whether their VPC was the requester or accepter for the VPC peering connection. If the peered VPCs are in the same account, you can modify the requester and accepter options in the same request. To confirm which VPC is the accepter and requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ModifyVpcPeeringConnectionOptionsInput{
		VpcPeeringConnectionId: aws.String("String"), // Required
		AccepterPeeringConnectionOptions: &ec2.PeeringConnectionOptionsRequest{
			AllowDnsResolutionFromRemoteVpc:            aws.Bool(true),
			AllowEgressFromLocalClassicLinkToRemoteVpc: aws.Bool(true),
			AllowEgressFromLocalVpcToRemoteClassicLink: aws.Bool(true),
		},
		DryRun: aws.Bool(true),
		RequesterPeeringConnectionOptions: &ec2.PeeringConnectionOptionsRequest{
			AllowDnsResolutionFromRemoteVpc:            aws.Bool(true),
			AllowEgressFromLocalClassicLinkToRemoteVpc: aws.Bool(true),
			AllowEgressFromLocalVpcToRemoteClassicLink: aws.Bool(true),
		},
	}
	resp, err := svc.ModifyVpcPeeringConnectionOptions(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ModifyVpcPeeringConnectionOptionsRequest added in v1.1.21 

func (c *EC2) ModifyVpcPeeringConnectionOptionsRequest(input *ModifyVpcPeeringConnectionOptionsInput) (req *request.Request, output *ModifyVpcPeeringConnectionOptionsOutput)

ModifyVpcPeeringConnectionOptionsRequest generates a "aws/request.Request" representing the client's request for the ModifyVpcPeeringConnectionOptions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyVpcPeeringConnectionOptions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyVpcPeeringConnectionOptionsRequest method.
req, resp := client.ModifyVpcPeeringConnectionOptionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) MonitorInstances 

func (c *EC2) MonitorInstances(input *MonitorInstancesInput) (*MonitorInstancesOutput, error)

Enables monitoring for a running instance. For more information about monitoring instances, see Monitoring Your Instances and Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.MonitorInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.MonitorInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) MonitorInstancesRequest 

func (c *EC2) MonitorInstancesRequest(input *MonitorInstancesInput) (req *request.Request, output *MonitorInstancesOutput)

MonitorInstancesRequest generates a "aws/request.Request" representing the client's request for the MonitorInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the MonitorInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the MonitorInstancesRequest method.
req, resp := client.MonitorInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) MoveAddressToVpc added in v0.9.5 

func (c *EC2) MoveAddressToVpc(input *MoveAddressToVpcInput) (*MoveAddressToVpcOutput, error)

Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC platform. The Elastic IP address must be allocated to your account for more than 24 hours, and it must not be associated with an instance. After the Elastic IP address is moved, it is no longer available for use in the EC2-Classic platform, unless you move it back using the RestoreAddressToClassic request. You cannot move an Elastic IP address that was originally allocated for use in the EC2-VPC platform to the EC2-Classic platform.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.MoveAddressToVpcInput{
		PublicIp: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.MoveAddressToVpc(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) MoveAddressToVpcRequest added in v0.9.5 

func (c *EC2) MoveAddressToVpcRequest(input *MoveAddressToVpcInput) (req *request.Request, output *MoveAddressToVpcOutput)

MoveAddressToVpcRequest generates a "aws/request.Request" representing the client's request for the MoveAddressToVpc operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the MoveAddressToVpc method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the MoveAddressToVpcRequest method.
req, resp := client.MoveAddressToVpcRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) PurchaseHostReservation added in v1.4.3 

func (c *EC2) PurchaseHostReservation(input *PurchaseHostReservationInput) (*PurchaseHostReservationOutput, error)

Purchase a reservation with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation. This action results in the specified reservation being purchased and charged to your account.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.PurchaseHostReservationInput{
		HostIdSet: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		OfferingId:   aws.String("String"), // Required
		ClientToken:  aws.String("String"),
		CurrencyCode: aws.String("CurrencyCodeValues"),
		LimitPrice:   aws.String("String"),
	}
	resp, err := svc.PurchaseHostReservation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) PurchaseHostReservationRequest added in v1.4.3 

func (c *EC2) PurchaseHostReservationRequest(input *PurchaseHostReservationInput) (req *request.Request, output *PurchaseHostReservationOutput)

PurchaseHostReservationRequest generates a "aws/request.Request" representing the client's request for the PurchaseHostReservation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PurchaseHostReservation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the PurchaseHostReservationRequest method.
req, resp := client.PurchaseHostReservationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) PurchaseReservedInstancesOffering 

func (c *EC2) PurchaseReservedInstancesOffering(input *PurchaseReservedInstancesOfferingInput) (*PurchaseReservedInstancesOfferingOutput, error)

Purchases a Reserved Instance for use with your account. With Reserved Instances, you pay a lower hourly rate compared to On-Demand instance pricing.

Use DescribeReservedInstancesOfferings to get a list of Reserved Instance offerings that match your specifications. After you've purchased a Reserved Instance, you can check for your new Reserved Instance with DescribeReservedInstances.

For more information, see Reserved Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/concepts-on-demand-reserved-instances.html) and Reserved Instance Marketplace (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ri-market-general.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.PurchaseReservedInstancesOfferingInput{
		InstanceCount:               aws.Int64(1),         // Required
		ReservedInstancesOfferingId: aws.String("String"), // Required
		DryRun:                      aws.Bool(true),
		LimitPrice: &ec2.ReservedInstanceLimitPrice{
			Amount:       aws.Float64(1.0),
			CurrencyCode: aws.String("CurrencyCodeValues"),
		},
	}
	resp, err := svc.PurchaseReservedInstancesOffering(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) PurchaseReservedInstancesOfferingRequest 

func (c *EC2) PurchaseReservedInstancesOfferingRequest(input *PurchaseReservedInstancesOfferingInput) (req *request.Request, output *PurchaseReservedInstancesOfferingOutput)

PurchaseReservedInstancesOfferingRequest generates a "aws/request.Request" representing the client's request for the PurchaseReservedInstancesOffering operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PurchaseReservedInstancesOffering method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the PurchaseReservedInstancesOfferingRequest method.
req, resp := client.PurchaseReservedInstancesOfferingRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) PurchaseScheduledInstances added in v1.0.9 

func (c *EC2) PurchaseScheduledInstances(input *PurchaseScheduledInstancesInput) (*PurchaseScheduledInstancesOutput, error)

Purchases one or more Scheduled Instances with the specified schedule.

Scheduled Instances enable you to purchase Amazon EC2 compute capacity by the hour for a one-year term. Before you can purchase a Scheduled Instance, you must call DescribeScheduledInstanceAvailability to check for available schedules and obtain a purchase token. After you purchase a Scheduled Instance, you must call RunScheduledInstances during each scheduled time period.

After you purchase a Scheduled Instance, you can't cancel, modify, or resell your purchase.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.PurchaseScheduledInstancesInput{
		PurchaseRequests: []*ec2.PurchaseRequest{ // Required
			{ // Required
				InstanceCount: aws.Int64(1),         // Required
				PurchaseToken: aws.String("String"), // Required
			},
			// More values...
		},
		ClientToken: aws.String("String"),
		DryRun:      aws.Bool(true),
	}
	resp, err := svc.PurchaseScheduledInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) PurchaseScheduledInstancesRequest added in v1.0.9 

func (c *EC2) PurchaseScheduledInstancesRequest(input *PurchaseScheduledInstancesInput) (req *request.Request, output *PurchaseScheduledInstancesOutput)

PurchaseScheduledInstancesRequest generates a "aws/request.Request" representing the client's request for the PurchaseScheduledInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PurchaseScheduledInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the PurchaseScheduledInstancesRequest method.
req, resp := client.PurchaseScheduledInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RebootInstances 

func (c *EC2) RebootInstances(input *RebootInstancesInput) (*RebootInstancesOutput, error)

Requests a reboot of one or more instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored.

If an instance does not cleanly shut down within four minutes, Amazon EC2 performs a hard reboot.

For more information about troubleshooting, see Getting Console Output and Rebooting Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-console.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RebootInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.RebootInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RebootInstancesRequest 

func (c *EC2) RebootInstancesRequest(input *RebootInstancesInput) (req *request.Request, output *RebootInstancesOutput)

RebootInstancesRequest generates a "aws/request.Request" representing the client's request for the RebootInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RebootInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RebootInstancesRequest method.
req, resp := client.RebootInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RegisterImage 

func (c *EC2) RegisterImage(input *RegisterImageInput) (*RegisterImageOutput, error)

Registers an AMI. When you're creating an AMI, this is the final step you must complete before you can launch an instance from the AMI. For more information about creating AMIs, see Creating Your Own AMIs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami.html) in the Amazon Elastic Compute Cloud User Guide. 

For Amazon EBS-backed instances, CreateImage creates and registers the

AMI in a single request, so you don't have to register the AMI yourself. 

You can also use RegisterImage to create an Amazon EBS-backed Linux AMI

from a snapshot of a root device volume. For more information, see Launching an Instance from a Snapshot (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_LaunchingInstanceFromSnapshot.html) in the Amazon Elastic Compute Cloud User Guide. 

Some Linux distributions, such as Red Hat Enterprise Linux (RHEL) and SUSE

Linux Enterprise Server (SLES), use the EC2 billingProduct code associated with an AMI to verify subscription status for package updates. Creating an AMI from an EBS snapshot does not maintain this billing code, and subsequent instances launched from such an AMI will not be able to connect to package update infrastructure.

Similarly, although you can create a Windows AMI from a snapshot, you can't successfully launch an instance from the AMI.

To create Windows AMIs or to create AMIs for Linux operating systems that must retain AMI billing codes to work properly, see CreateImage. 

If needed, you can deregister an AMI at any time. Any modifications you

make to an AMI backed by an instance store volume invalidates its registration. If you make changes to an image, deregister the previous image and register the new image. 

You can't register an image where a secondary (non-root) snapshot has AWS

Marketplace product codes.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RegisterImageInput{
		Name:         aws.String("String"), // Required
		Architecture: aws.String("ArchitectureValues"),
		BlockDeviceMappings: []*ec2.BlockDeviceMapping{
			{ // Required
				DeviceName: aws.String("String"),
				Ebs: &ec2.EbsBlockDevice{
					DeleteOnTermination: aws.Bool(true),
					Encrypted:           aws.Bool(true),
					Iops:                aws.Int64(1),
					SnapshotId:          aws.String("String"),
					VolumeSize:          aws.Int64(1),
					VolumeType:          aws.String("VolumeType"),
				},
				NoDevice:    aws.String("String"),
				VirtualName: aws.String("String"),
			},
			// More values...
		},
		Description:        aws.String("String"),
		DryRun:             aws.Bool(true),
		EnaSupport:         aws.Bool(true),
		ImageLocation:      aws.String("String"),
		KernelId:           aws.String("String"),
		RamdiskId:          aws.String("String"),
		RootDeviceName:     aws.String("String"),
		SriovNetSupport:    aws.String("String"),
		VirtualizationType: aws.String("String"),
	}
	resp, err := svc.RegisterImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RegisterImageRequest 

func (c *EC2) RegisterImageRequest(input *RegisterImageInput) (req *request.Request, output *RegisterImageOutput)

RegisterImageRequest generates a "aws/request.Request" representing the client's request for the RegisterImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RegisterImageRequest method.
req, resp := client.RegisterImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RejectVpcPeeringConnection added in v0.9.5 

func (c *EC2) RejectVpcPeeringConnection(input *RejectVpcPeeringConnectionInput) (*RejectVpcPeeringConnectionOutput, error)

Rejects a VPC peering connection request. The VPC peering connection must be in the pending-acceptance state. Use the DescribeVpcPeeringConnections request to view your outstanding VPC peering connection requests. To delete an active VPC peering connection, or to delete a VPC peering connection request that you initiated, use DeleteVpcPeeringConnection.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RejectVpcPeeringConnectionInput{
		VpcPeeringConnectionId: aws.String("String"), // Required
		DryRun:                 aws.Bool(true),
	}
	resp, err := svc.RejectVpcPeeringConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RejectVpcPeeringConnectionRequest added in v0.9.5 

func (c *EC2) RejectVpcPeeringConnectionRequest(input *RejectVpcPeeringConnectionInput) (req *request.Request, output *RejectVpcPeeringConnectionOutput)

RejectVpcPeeringConnectionRequest generates a "aws/request.Request" representing the client's request for the RejectVpcPeeringConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RejectVpcPeeringConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RejectVpcPeeringConnectionRequest method.
req, resp := client.RejectVpcPeeringConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReleaseAddress 

func (c *EC2) ReleaseAddress(input *ReleaseAddressInput) (*ReleaseAddressOutput, error)

Releases the specified Elastic IP address.

After releasing an Elastic IP address, it is released to the IP address pool and might be unavailable to you. Be sure to update your DNS records and any servers or devices that communicate with the address. If you attempt to release an Elastic IP address that you already released, you'll get an AuthFailure error if the address is already allocated to another AWS account.

[EC2-Classic, default VPC] Releasing an Elastic IP address automatically disassociates it from any instance that it's associated with. To disassociate an Elastic IP address without releasing it, use DisassociateAddress.

[Nondefault VPC] You must use DisassociateAddress to disassociate the Elastic IP address before you try to release it. Otherwise, Amazon EC2 returns an error (InvalidIPAddress.InUse).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReleaseAddressInput{
		AllocationId: aws.String("String"),
		DryRun:       aws.Bool(true),
		PublicIp:     aws.String("String"),
	}
	resp, err := svc.ReleaseAddress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReleaseAddressRequest 

func (c *EC2) ReleaseAddressRequest(input *ReleaseAddressInput) (req *request.Request, output *ReleaseAddressOutput)

ReleaseAddressRequest generates a "aws/request.Request" representing the client's request for the ReleaseAddress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReleaseAddress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReleaseAddressRequest method.
req, resp := client.ReleaseAddressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReleaseHosts added in v1.0.1 

func (c *EC2) ReleaseHosts(input *ReleaseHostsInput) (*ReleaseHostsOutput, error)

When you no longer want to use an On-Demand Dedicated Host it can be released. On-Demand billing is stopped and the host goes into released state. The host ID of Dedicated Hosts that have been released can no longer be specified in another request, e.g., ModifyHosts. You must stop or terminate all instances on a host before it can be released.

When Dedicated Hosts are released, it make take some time for them to stop counting toward your limit and you may receive capacity errors when trying to allocate new Dedicated hosts. Try waiting a few minutes, and then try again.

Released hosts will still appear in a DescribeHosts response.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReleaseHostsInput{
		HostIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.ReleaseHosts(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReleaseHostsRequest added in v1.0.1 

func (c *EC2) ReleaseHostsRequest(input *ReleaseHostsInput) (req *request.Request, output *ReleaseHostsOutput)

ReleaseHostsRequest generates a "aws/request.Request" representing the client's request for the ReleaseHosts operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReleaseHosts method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReleaseHostsRequest method.
req, resp := client.ReleaseHostsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReplaceNetworkAclAssociation added in v0.9.5 

func (c *EC2) ReplaceNetworkAclAssociation(input *ReplaceNetworkAclAssociationInput) (*ReplaceNetworkAclAssociationOutput, error)

Changes which network ACL a subnet is associated with. By default when you create a subnet, it's automatically associated with the default network ACL. For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReplaceNetworkAclAssociationInput{
		AssociationId: aws.String("String"), // Required
		NetworkAclId:  aws.String("String"), // Required
		DryRun:        aws.Bool(true),
	}
	resp, err := svc.ReplaceNetworkAclAssociation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReplaceNetworkAclAssociationRequest added in v0.9.5 

func (c *EC2) ReplaceNetworkAclAssociationRequest(input *ReplaceNetworkAclAssociationInput) (req *request.Request, output *ReplaceNetworkAclAssociationOutput)

ReplaceNetworkAclAssociationRequest generates a "aws/request.Request" representing the client's request for the ReplaceNetworkAclAssociation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReplaceNetworkAclAssociation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReplaceNetworkAclAssociationRequest method.
req, resp := client.ReplaceNetworkAclAssociationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReplaceNetworkAclEntry added in v0.9.5 

func (c *EC2) ReplaceNetworkAclEntry(input *ReplaceNetworkAclEntryInput) (*ReplaceNetworkAclEntryOutput, error)

Replaces an entry (rule) in a network ACL. For more information about network ACLs, see Network ACLs (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_ACLs.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReplaceNetworkAclEntryInput{
		CidrBlock:    aws.String("String"),     // Required
		Egress:       aws.Bool(true),           // Required
		NetworkAclId: aws.String("String"),     // Required
		Protocol:     aws.String("String"),     // Required
		RuleAction:   aws.String("RuleAction"), // Required
		RuleNumber:   aws.Int64(1),             // Required
		DryRun:       aws.Bool(true),
		IcmpTypeCode: &ec2.IcmpTypeCode{
			Code: aws.Int64(1),
			Type: aws.Int64(1),
		},
		PortRange: &ec2.PortRange{
			From: aws.Int64(1),
			To:   aws.Int64(1),
		},
	}
	resp, err := svc.ReplaceNetworkAclEntry(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReplaceNetworkAclEntryRequest added in v0.9.5 

func (c *EC2) ReplaceNetworkAclEntryRequest(input *ReplaceNetworkAclEntryInput) (req *request.Request, output *ReplaceNetworkAclEntryOutput)

ReplaceNetworkAclEntryRequest generates a "aws/request.Request" representing the client's request for the ReplaceNetworkAclEntry operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReplaceNetworkAclEntry method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReplaceNetworkAclEntryRequest method.
req, resp := client.ReplaceNetworkAclEntryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReplaceRoute 

func (c *EC2) ReplaceRoute(input *ReplaceRouteInput) (*ReplaceRouteOutput, error)

Replaces an existing route within a route table in a VPC. You must provide only one of the following: Internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, or network interface.

For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReplaceRouteInput{
		DestinationCidrBlock:   aws.String("String"), // Required
		RouteTableId:           aws.String("String"), // Required
		DryRun:                 aws.Bool(true),
		GatewayId:              aws.String("String"),
		InstanceId:             aws.String("String"),
		NatGatewayId:           aws.String("String"),
		NetworkInterfaceId:     aws.String("String"),
		VpcPeeringConnectionId: aws.String("String"),
	}
	resp, err := svc.ReplaceRoute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReplaceRouteRequest 

func (c *EC2) ReplaceRouteRequest(input *ReplaceRouteInput) (req *request.Request, output *ReplaceRouteOutput)

ReplaceRouteRequest generates a "aws/request.Request" representing the client's request for the ReplaceRoute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReplaceRoute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReplaceRouteRequest method.
req, resp := client.ReplaceRouteRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReplaceRouteTableAssociation 

func (c *EC2) ReplaceRouteTableAssociation(input *ReplaceRouteTableAssociationInput) (*ReplaceRouteTableAssociationOutput, error)

Changes the route table associated with a given subnet in a VPC. After the operation completes, the subnet uses the routes in the new route table it's associated with. For more information about route tables, see Route Tables (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Route_Tables.html) in the Amazon Virtual Private Cloud User Guide.

You can also use ReplaceRouteTableAssociation to change which table is the main route table in the VPC. You just specify the main route table's association ID and the route table to be the new main route table.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReplaceRouteTableAssociationInput{
		AssociationId: aws.String("String"), // Required
		RouteTableId:  aws.String("String"), // Required
		DryRun:        aws.Bool(true),
	}
	resp, err := svc.ReplaceRouteTableAssociation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReplaceRouteTableAssociationRequest 

func (c *EC2) ReplaceRouteTableAssociationRequest(input *ReplaceRouteTableAssociationInput) (req *request.Request, output *ReplaceRouteTableAssociationOutput)

ReplaceRouteTableAssociationRequest generates a "aws/request.Request" representing the client's request for the ReplaceRouteTableAssociation operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReplaceRouteTableAssociation method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReplaceRouteTableAssociationRequest method.
req, resp := client.ReplaceRouteTableAssociationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ReportInstanceStatus 

func (c *EC2) ReportInstanceStatus(input *ReportInstanceStatusInput) (*ReportInstanceStatusOutput, error)

Submits feedback about the status of an instance. The instance must be in the running state. If your experience with the instance differs from the instance status returned by DescribeInstanceStatus, use ReportInstanceStatus to report your experience with the instance. Amazon EC2 collects this information to improve the accuracy of status checks.

Use of this action does not change the value returned by DescribeInstanceStatus.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ReportInstanceStatusInput{
		Instances: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		ReasonCodes: []*string{ // Required
			aws.String("ReportInstanceReasonCodes"), // Required
			// More values...
		},
		Status:      aws.String("ReportStatusType"), // Required
		Description: aws.String("String"),
		DryRun:      aws.Bool(true),
		EndTime:     aws.Time(time.Now()),
		StartTime:   aws.Time(time.Now()),
	}
	resp, err := svc.ReportInstanceStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ReportInstanceStatusRequest 

func (c *EC2) ReportInstanceStatusRequest(input *ReportInstanceStatusInput) (req *request.Request, output *ReportInstanceStatusOutput)

ReportInstanceStatusRequest generates a "aws/request.Request" representing the client's request for the ReportInstanceStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ReportInstanceStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ReportInstanceStatusRequest method.
req, resp := client.ReportInstanceStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RequestSpotFleet 

func (c *EC2) RequestSpotFleet(input *RequestSpotFleetInput) (*RequestSpotFleetOutput, error)

Creates a Spot fleet request.

You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet.

By default, the Spot fleet requests Spot instances in the Spot pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload.

Alternatively, you can specify that the Spot fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot instances in your Spot fleet are in different Spot pools, you can improve the availability of your fleet.

For more information, see Spot Fleet Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-requests.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RequestSpotFleetInput{
		SpotFleetRequestConfig: &ec2.SpotFleetRequestConfigData{ // Required
			IamFleetRole: aws.String("String"), // Required
			LaunchSpecifications: []*ec2.SpotFleetLaunchSpecification{ // Required
				{ // Required
					AddressingType: aws.String("String"),
					BlockDeviceMappings: []*ec2.BlockDeviceMapping{
						{ // Required
							DeviceName: aws.String("String"),
							Ebs: &ec2.EbsBlockDevice{
								DeleteOnTermination: aws.Bool(true),
								Encrypted:           aws.Bool(true),
								Iops:                aws.Int64(1),
								SnapshotId:          aws.String("String"),
								VolumeSize:          aws.Int64(1),
								VolumeType:          aws.String("VolumeType"),
							},
							NoDevice:    aws.String("String"),
							VirtualName: aws.String("String"),
						},
						// More values...
					},
					EbsOptimized: aws.Bool(true),
					IamInstanceProfile: &ec2.IamInstanceProfileSpecification{
						Arn:  aws.String("String"),
						Name: aws.String("String"),
					},
					ImageId:      aws.String("String"),
					InstanceType: aws.String("InstanceType"),
					KernelId:     aws.String("String"),
					KeyName:      aws.String("String"),
					Monitoring: &ec2.SpotFleetMonitoring{
						Enabled: aws.Bool(true),
					},
					NetworkInterfaces: []*ec2.InstanceNetworkInterfaceSpecification{
						{ // Required
							AssociatePublicIpAddress: aws.Bool(true),
							DeleteOnTermination:      aws.Bool(true),
							Description:              aws.String("String"),
							DeviceIndex:              aws.Int64(1),
							Groups: []*string{
								aws.String("String"), // Required
								// More values...
							},
							NetworkInterfaceId: aws.String("String"),
							PrivateIpAddress:   aws.String("String"),
							PrivateIpAddresses: []*ec2.PrivateIpAddressSpecification{
								{ // Required
									PrivateIpAddress: aws.String("String"), // Required
									Primary:          aws.Bool(true),
								},
								// More values...
							},
							SecondaryPrivateIpAddressCount: aws.Int64(1),
							SubnetId:                       aws.String("String"),
						},
						// More values...
					},
					Placement: &ec2.SpotPlacement{
						AvailabilityZone: aws.String("String"),
						GroupName:        aws.String("String"),
					},
					RamdiskId: aws.String("String"),
					SecurityGroups: []*ec2.GroupIdentifier{
						{ // Required
							GroupId:   aws.String("String"),
							GroupName: aws.String("String"),
						},
						// More values...
					},
					SpotPrice:        aws.String("String"),
					SubnetId:         aws.String("String"),
					UserData:         aws.String("String"),
					WeightedCapacity: aws.Float64(1.0),
				},
				// More values...
			},
			SpotPrice:                        aws.String("String"), // Required
			TargetCapacity:                   aws.Int64(1),         // Required
			AllocationStrategy:               aws.String("AllocationStrategy"),
			ClientToken:                      aws.String("String"),
			ExcessCapacityTerminationPolicy:  aws.String("ExcessCapacityTerminationPolicy"),
			FulfilledCapacity:                aws.Float64(1.0),
			TerminateInstancesWithExpiration: aws.Bool(true),
			Type:                             aws.String("FleetType"),
			ValidFrom:                        aws.Time(time.Now()),
			ValidUntil:                       aws.Time(time.Now()),
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.RequestSpotFleet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RequestSpotFleetRequest 

func (c *EC2) RequestSpotFleetRequest(input *RequestSpotFleetInput) (req *request.Request, output *RequestSpotFleetOutput)

RequestSpotFleetRequest generates a "aws/request.Request" representing the client's request for the RequestSpotFleet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RequestSpotFleet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RequestSpotFleetRequest method.
req, resp := client.RequestSpotFleetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RequestSpotInstances 

func (c *EC2) RequestSpotInstances(input *RequestSpotInstancesInput) (*RequestSpotInstancesOutput, error)

Creates a Spot instance request. Spot instances are instances that Amazon EC2 launches when the bid price that you specify exceeds the current Spot price. Amazon EC2 periodically sets the Spot price based on available Spot Instance capacity and current Spot instance requests. For more information, see Spot Instance Requests (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-requests.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RequestSpotInstancesInput{
		SpotPrice:             aws.String("String"), // Required
		AvailabilityZoneGroup: aws.String("String"),
		BlockDurationMinutes:  aws.Int64(1),
		ClientToken:           aws.String("String"),
		DryRun:                aws.Bool(true),
		InstanceCount:         aws.Int64(1),
		LaunchGroup:           aws.String("String"),
		LaunchSpecification: &ec2.RequestSpotLaunchSpecification{
			AddressingType: aws.String("String"),
			BlockDeviceMappings: []*ec2.BlockDeviceMapping{
				{ // Required
					DeviceName: aws.String("String"),
					Ebs: &ec2.EbsBlockDevice{
						DeleteOnTermination: aws.Bool(true),
						Encrypted:           aws.Bool(true),
						Iops:                aws.Int64(1),
						SnapshotId:          aws.String("String"),
						VolumeSize:          aws.Int64(1),
						VolumeType:          aws.String("VolumeType"),
					},
					NoDevice:    aws.String("String"),
					VirtualName: aws.String("String"),
				},
				// More values...
			},
			EbsOptimized: aws.Bool(true),
			IamInstanceProfile: &ec2.IamInstanceProfileSpecification{
				Arn:  aws.String("String"),
				Name: aws.String("String"),
			},
			ImageId:      aws.String("String"),
			InstanceType: aws.String("InstanceType"),
			KernelId:     aws.String("String"),
			KeyName:      aws.String("String"),
			Monitoring: &ec2.RunInstancesMonitoringEnabled{
				Enabled: aws.Bool(true), // Required
			},
			NetworkInterfaces: []*ec2.InstanceNetworkInterfaceSpecification{
				{ // Required
					AssociatePublicIpAddress: aws.Bool(true),
					DeleteOnTermination:      aws.Bool(true),
					Description:              aws.String("String"),
					DeviceIndex:              aws.Int64(1),
					Groups: []*string{
						aws.String("String"), // Required
						// More values...
					},
					NetworkInterfaceId: aws.String("String"),
					PrivateIpAddress:   aws.String("String"),
					PrivateIpAddresses: []*ec2.PrivateIpAddressSpecification{
						{ // Required
							PrivateIpAddress: aws.String("String"), // Required
							Primary:          aws.Bool(true),
						},
						// More values...
					},
					SecondaryPrivateIpAddressCount: aws.Int64(1),
					SubnetId:                       aws.String("String"),
				},
				// More values...
			},
			Placement: &ec2.SpotPlacement{
				AvailabilityZone: aws.String("String"),
				GroupName:        aws.String("String"),
			},
			RamdiskId: aws.String("String"),
			SecurityGroupIds: []*string{
				aws.String("String"), // Required
				// More values...
			},
			SecurityGroups: []*string{
				aws.String("String"), // Required
				// More values...
			},
			SubnetId: aws.String("String"),
			UserData: aws.String("String"),
		},
		Type:       aws.String("SpotInstanceType"),
		ValidFrom:  aws.Time(time.Now()),
		ValidUntil: aws.Time(time.Now()),
	}
	resp, err := svc.RequestSpotInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RequestSpotInstancesRequest 

func (c *EC2) RequestSpotInstancesRequest(input *RequestSpotInstancesInput) (req *request.Request, output *RequestSpotInstancesOutput)

RequestSpotInstancesRequest generates a "aws/request.Request" representing the client's request for the RequestSpotInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RequestSpotInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RequestSpotInstancesRequest method.
req, resp := client.RequestSpotInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ResetImageAttribute 

func (c *EC2) ResetImageAttribute(input *ResetImageAttributeInput) (*ResetImageAttributeOutput, error)

Resets an attribute of an AMI to its default value. 

The productCodes attribute can't be reset.
Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ResetImageAttributeInput{
		Attribute: aws.String("ResetImageAttributeName"), // Required
		ImageId:   aws.String("String"),                  // Required
		DryRun:    aws.Bool(true),
	}
	resp, err := svc.ResetImageAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ResetImageAttributeRequest 

func (c *EC2) ResetImageAttributeRequest(input *ResetImageAttributeInput) (req *request.Request, output *ResetImageAttributeOutput)

ResetImageAttributeRequest generates a "aws/request.Request" representing the client's request for the ResetImageAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResetImageAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ResetImageAttributeRequest method.
req, resp := client.ResetImageAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ResetInstanceAttribute 

func (c *EC2) ResetInstanceAttribute(input *ResetInstanceAttributeInput) (*ResetInstanceAttributeOutput, error)

Resets an attribute of an instance to its default value. To reset the kernel or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, the instance can be either running or stopped.

The sourceDestCheck attribute controls whether source/destination checking is enabled. The default value is true, which means checking is enabled. This value must be false for a NAT instance to perform NAT. For more information, see NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html) in the Amazon Virtual Private Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ResetInstanceAttributeInput{
		Attribute:  aws.String("InstanceAttributeName"), // Required
		InstanceId: aws.String("String"),                // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.ResetInstanceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ResetInstanceAttributeRequest 

func (c *EC2) ResetInstanceAttributeRequest(input *ResetInstanceAttributeInput) (req *request.Request, output *ResetInstanceAttributeOutput)

ResetInstanceAttributeRequest generates a "aws/request.Request" representing the client's request for the ResetInstanceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResetInstanceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ResetInstanceAttributeRequest method.
req, resp := client.ResetInstanceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ResetNetworkInterfaceAttribute 

func (c *EC2) ResetNetworkInterfaceAttribute(input *ResetNetworkInterfaceAttributeInput) (*ResetNetworkInterfaceAttributeOutput, error)

Resets a network interface attribute. You can specify only one attribute at a time.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ResetNetworkInterfaceAttributeInput{
		NetworkInterfaceId: aws.String("String"), // Required
		DryRun:             aws.Bool(true),
		SourceDestCheck:    aws.String("String"),
	}
	resp, err := svc.ResetNetworkInterfaceAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ResetNetworkInterfaceAttributeRequest 

func (c *EC2) ResetNetworkInterfaceAttributeRequest(input *ResetNetworkInterfaceAttributeInput) (req *request.Request, output *ResetNetworkInterfaceAttributeOutput)

ResetNetworkInterfaceAttributeRequest generates a "aws/request.Request" representing the client's request for the ResetNetworkInterfaceAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResetNetworkInterfaceAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ResetNetworkInterfaceAttributeRequest method.
req, resp := client.ResetNetworkInterfaceAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) ResetSnapshotAttribute 

func (c *EC2) ResetSnapshotAttribute(input *ResetSnapshotAttributeInput) (*ResetSnapshotAttributeOutput, error)

Resets permission settings for the specified snapshot.

For more information on modifying snapshot permissions, see Sharing Snapshots (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-modifying-snapshot-permissions.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.ResetSnapshotAttributeInput{
		Attribute:  aws.String("SnapshotAttributeName"), // Required
		SnapshotId: aws.String("String"),                // Required
		DryRun:     aws.Bool(true),
	}
	resp, err := svc.ResetSnapshotAttribute(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) ResetSnapshotAttributeRequest 

func (c *EC2) ResetSnapshotAttributeRequest(input *ResetSnapshotAttributeInput) (req *request.Request, output *ResetSnapshotAttributeOutput)

ResetSnapshotAttributeRequest generates a "aws/request.Request" representing the client's request for the ResetSnapshotAttribute operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResetSnapshotAttribute method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ResetSnapshotAttributeRequest method.
req, resp := client.ResetSnapshotAttributeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RestoreAddressToClassic 

func (c *EC2) RestoreAddressToClassic(input *RestoreAddressToClassicInput) (*RestoreAddressToClassicOutput, error)

Restores an Elastic IP address that was previously moved to the EC2-VPC platform back to the EC2-Classic platform. You cannot move an Elastic IP address that was originally allocated for use in EC2-VPC. The Elastic IP address must not be associated with an instance or network interface.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RestoreAddressToClassicInput{
		PublicIp: aws.String("String"), // Required
		DryRun:   aws.Bool(true),
	}
	resp, err := svc.RestoreAddressToClassic(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RestoreAddressToClassicRequest 

func (c *EC2) RestoreAddressToClassicRequest(input *RestoreAddressToClassicInput) (req *request.Request, output *RestoreAddressToClassicOutput)

RestoreAddressToClassicRequest generates a "aws/request.Request" representing the client's request for the RestoreAddressToClassic operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RestoreAddressToClassic method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RestoreAddressToClassicRequest method.
req, resp := client.RestoreAddressToClassicRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RevokeSecurityGroupEgress 

func (c *EC2) RevokeSecurityGroupEgress(input *RevokeSecurityGroupEgressInput) (*RevokeSecurityGroupEgressOutput, error)

[EC2-VPC only] Removes one or more egress rules from a security group for EC2-VPC. This action doesn't apply to security groups for use in EC2-Classic. The values that you specify in the revoke request (for example, ports) must match the existing rule's values for the rule to be revoked.

Each rule consists of the protocol and the CIDR range or source security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RevokeSecurityGroupEgressInput{
		GroupId:  aws.String("String"), // Required
		CidrIp:   aws.String("String"),
		DryRun:   aws.Bool(true),
		FromPort: aws.Int64(1),
		IpPermissions: []*ec2.IpPermission{
			{ // Required
				FromPort:   aws.Int64(1),
				IpProtocol: aws.String("String"),
				IpRanges: []*ec2.IpRange{
					{ // Required
						CidrIp: aws.String("String"),
					},
					// More values...
				},
				PrefixListIds: []*ec2.PrefixListId{
					{ // Required
						PrefixListId: aws.String("String"),
					},
					// More values...
				},
				ToPort: aws.Int64(1),
				UserIdGroupPairs: []*ec2.UserIdGroupPair{
					{ // Required
						GroupId:                aws.String("String"),
						GroupName:              aws.String("String"),
						PeeringStatus:          aws.String("String"),
						UserId:                 aws.String("String"),
						VpcId:                  aws.String("String"),
						VpcPeeringConnectionId: aws.String("String"),
					},
					// More values...
				},
			},
			// More values...
		},
		IpProtocol:                 aws.String("String"),
		SourceSecurityGroupName:    aws.String("String"),
		SourceSecurityGroupOwnerId: aws.String("String"),
		ToPort:                     aws.Int64(1),
	}
	resp, err := svc.RevokeSecurityGroupEgress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RevokeSecurityGroupEgressRequest 

func (c *EC2) RevokeSecurityGroupEgressRequest(input *RevokeSecurityGroupEgressInput) (req *request.Request, output *RevokeSecurityGroupEgressOutput)

RevokeSecurityGroupEgressRequest generates a "aws/request.Request" representing the client's request for the RevokeSecurityGroupEgress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RevokeSecurityGroupEgress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RevokeSecurityGroupEgressRequest method.
req, resp := client.RevokeSecurityGroupEgressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RevokeSecurityGroupIngress 

func (c *EC2) RevokeSecurityGroupIngress(input *RevokeSecurityGroupIngressInput) (*RevokeSecurityGroupIngressOutput, error)

Removes one or more ingress rules from a security group. The values that you specify in the revoke request (for example, ports) must match the existing rule's values for the rule to be removed.

Each rule consists of the protocol and the CIDR range or source security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RevokeSecurityGroupIngressInput{
		CidrIp:    aws.String("String"),
		DryRun:    aws.Bool(true),
		FromPort:  aws.Int64(1),
		GroupId:   aws.String("String"),
		GroupName: aws.String("String"),
		IpPermissions: []*ec2.IpPermission{
			{ // Required
				FromPort:   aws.Int64(1),
				IpProtocol: aws.String("String"),
				IpRanges: []*ec2.IpRange{
					{ // Required
						CidrIp: aws.String("String"),
					},
					// More values...
				},
				PrefixListIds: []*ec2.PrefixListId{
					{ // Required
						PrefixListId: aws.String("String"),
					},
					// More values...
				},
				ToPort: aws.Int64(1),
				UserIdGroupPairs: []*ec2.UserIdGroupPair{
					{ // Required
						GroupId:                aws.String("String"),
						GroupName:              aws.String("String"),
						PeeringStatus:          aws.String("String"),
						UserId:                 aws.String("String"),
						VpcId:                  aws.String("String"),
						VpcPeeringConnectionId: aws.String("String"),
					},
					// More values...
				},
			},
			// More values...
		},
		IpProtocol:                 aws.String("String"),
		SourceSecurityGroupName:    aws.String("String"),
		SourceSecurityGroupOwnerId: aws.String("String"),
		ToPort:                     aws.Int64(1),
	}
	resp, err := svc.RevokeSecurityGroupIngress(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RevokeSecurityGroupIngressRequest 

func (c *EC2) RevokeSecurityGroupIngressRequest(input *RevokeSecurityGroupIngressInput) (req *request.Request, output *RevokeSecurityGroupIngressOutput)

RevokeSecurityGroupIngressRequest generates a "aws/request.Request" representing the client's request for the RevokeSecurityGroupIngress operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RevokeSecurityGroupIngress method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RevokeSecurityGroupIngressRequest method.
req, resp := client.RevokeSecurityGroupIngressRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RunInstances 

func (c *EC2) RunInstances(input *RunInstancesInput) (*Reservation, error)

Launches the specified number of instances using an AMI for which you have permissions.

When you launch an instance, it enters the pending state. After the instance is ready for you, it enters the running state. To check the state of your instance, call DescribeInstances.

To ensure faster instance launches, break up large requests into smaller batches. For example, create five separate launch requests for 100 instances each instead of one launch request for 500 instances.

To tag your instance, ensure that it is running as CreateTags requires a resource ID. For more information about tagging, see Tagging Your Amazon EC2 Resources (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html).

If you don't specify a security group when launching an instance, Amazon EC2 uses the default security group. For more information, see Security Groups (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html) in the Amazon Elastic Compute Cloud User Guide.

[EC2-VPC only accounts] If you don't specify a subnet in the request, we choose a default subnet from your default VPC for you.

[EC2-Classic accounts] If you're launching into EC2-Classic and you don't specify an Availability Zone, we choose one for you.

Linux instances have access to the public key of the key pair at boot. You can use this key to provide secure access to the instance. Amazon EC2 public images use this feature to provide secure access without passwords. For more information, see Key Pairs (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html) in the Amazon Elastic Compute Cloud User Guide.

You can provide optional user data when launching an instance. For more information, see Instance Metadata (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AESDG-chapter-instancedata.html) in the Amazon Elastic Compute Cloud User Guide.

If any of the AMIs have a product code attached for which the user has not subscribed, RunInstances fails.

Some instance types can only be launched into a VPC. If you do not have a default VPC, or if you do not specify a subnet ID in the request, RunInstances fails. For more information, see Instance Types Available Only in a VPC (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-vpc.html#vpc-only-instance-types).

For more information about troubleshooting, see What To Do If An Instance Immediately Terminates (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_InstanceStraightToTerminated.html), and Troubleshooting Connecting to Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesConnecting.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RunInstancesInput{
		ImageId:        aws.String("String"), // Required
		MaxCount:       aws.Int64(1),         // Required
		MinCount:       aws.Int64(1),         // Required
		AdditionalInfo: aws.String("String"),
		BlockDeviceMappings: []*ec2.BlockDeviceMapping{
			{ // Required
				DeviceName: aws.String("String"),
				Ebs: &ec2.EbsBlockDevice{
					DeleteOnTermination: aws.Bool(true),
					Encrypted:           aws.Bool(true),
					Iops:                aws.Int64(1),
					SnapshotId:          aws.String("String"),
					VolumeSize:          aws.Int64(1),
					VolumeType:          aws.String("VolumeType"),
				},
				NoDevice:    aws.String("String"),
				VirtualName: aws.String("String"),
			},
			// More values...
		},
		ClientToken:           aws.String("String"),
		DisableApiTermination: aws.Bool(true),
		DryRun:                aws.Bool(true),
		EbsOptimized:          aws.Bool(true),
		IamInstanceProfile: &ec2.IamInstanceProfileSpecification{
			Arn:  aws.String("String"),
			Name: aws.String("String"),
		},
		InstanceInitiatedShutdownBehavior: aws.String("ShutdownBehavior"),
		InstanceType:                      aws.String("InstanceType"),
		KernelId:                          aws.String("String"),
		KeyName:                           aws.String("String"),
		Monitoring: &ec2.RunInstancesMonitoringEnabled{
			Enabled: aws.Bool(true), // Required
		},
		NetworkInterfaces: []*ec2.InstanceNetworkInterfaceSpecification{
			{ // Required
				AssociatePublicIpAddress: aws.Bool(true),
				DeleteOnTermination:      aws.Bool(true),
				Description:              aws.String("String"),
				DeviceIndex:              aws.Int64(1),
				Groups: []*string{
					aws.String("String"), // Required
					// More values...
				},
				NetworkInterfaceId: aws.String("String"),
				PrivateIpAddress:   aws.String("String"),
				PrivateIpAddresses: []*ec2.PrivateIpAddressSpecification{
					{ // Required
						PrivateIpAddress: aws.String("String"), // Required
						Primary:          aws.Bool(true),
					},
					// More values...
				},
				SecondaryPrivateIpAddressCount: aws.Int64(1),
				SubnetId:                       aws.String("String"),
			},
			// More values...
		},
		Placement: &ec2.Placement{
			Affinity:         aws.String("String"),
			AvailabilityZone: aws.String("String"),
			GroupName:        aws.String("String"),
			HostId:           aws.String("String"),
			Tenancy:          aws.String("Tenancy"),
		},
		PrivateIpAddress: aws.String("String"),
		RamdiskId:        aws.String("String"),
		SecurityGroupIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SecurityGroups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SubnetId: aws.String("String"),
		UserData: aws.String("String"),
	}
	resp, err := svc.RunInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RunInstancesRequest 

func (c *EC2) RunInstancesRequest(input *RunInstancesInput) (req *request.Request, output *Reservation)

RunInstancesRequest generates a "aws/request.Request" representing the client's request for the RunInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RunInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RunInstancesRequest method.
req, resp := client.RunInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) RunScheduledInstances added in v1.0.9 

func (c *EC2) RunScheduledInstances(input *RunScheduledInstancesInput) (*RunScheduledInstancesOutput, error)

Launches the specified Scheduled Instances.

Before you can launch a Scheduled Instance, you must purchase it and obtain an identifier using PurchaseScheduledInstances.

You must launch a Scheduled Instance during its scheduled time period. You can't stop or reboot a Scheduled Instance, but you can terminate it as needed. If you terminate a Scheduled Instance before the current scheduled time period ends, you can launch it again after a few minutes. For more information, see Scheduled Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-scheduled-instances.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.RunScheduledInstancesInput{
		LaunchSpecification: &ec2.ScheduledInstancesLaunchSpecification{ // Required
			ImageId: aws.String("String"), // Required
			BlockDeviceMappings: []*ec2.ScheduledInstancesBlockDeviceMapping{
				{ // Required
					DeviceName: aws.String("String"),
					Ebs: &ec2.ScheduledInstancesEbs{
						DeleteOnTermination: aws.Bool(true),
						Encrypted:           aws.Bool(true),
						Iops:                aws.Int64(1),
						SnapshotId:          aws.String("String"),
						VolumeSize:          aws.Int64(1),
						VolumeType:          aws.String("String"),
					},
					NoDevice:    aws.String("String"),
					VirtualName: aws.String("String"),
				},
				// More values...
			},
			EbsOptimized: aws.Bool(true),
			IamInstanceProfile: &ec2.ScheduledInstancesIamInstanceProfile{
				Arn:  aws.String("String"),
				Name: aws.String("String"),
			},
			InstanceType: aws.String("String"),
			KernelId:     aws.String("String"),
			KeyName:      aws.String("String"),
			Monitoring: &ec2.ScheduledInstancesMonitoring{
				Enabled: aws.Bool(true),
			},
			NetworkInterfaces: []*ec2.ScheduledInstancesNetworkInterface{
				{ // Required
					AssociatePublicIpAddress: aws.Bool(true),
					DeleteOnTermination:      aws.Bool(true),
					Description:              aws.String("String"),
					DeviceIndex:              aws.Int64(1),
					Groups: []*string{
						aws.String("String"), // Required
						// More values...
					},
					NetworkInterfaceId: aws.String("String"),
					PrivateIpAddress:   aws.String("String"),
					PrivateIpAddressConfigs: []*ec2.ScheduledInstancesPrivateIpAddressConfig{
						{ // Required
							Primary:          aws.Bool(true),
							PrivateIpAddress: aws.String("String"),
						},
						// More values...
					},
					SecondaryPrivateIpAddressCount: aws.Int64(1),
					SubnetId:                       aws.String("String"),
				},
				// More values...
			},
			Placement: &ec2.ScheduledInstancesPlacement{
				AvailabilityZone: aws.String("String"),
				GroupName:        aws.String("String"),
			},
			RamdiskId: aws.String("String"),
			SecurityGroupIds: []*string{
				aws.String("String"), // Required
				// More values...
			},
			SubnetId: aws.String("String"),
			UserData: aws.String("String"),
		},
		ScheduledInstanceId: aws.String("String"), // Required
		ClientToken:         aws.String("String"),
		DryRun:              aws.Bool(true),
		InstanceCount:       aws.Int64(1),
	}
	resp, err := svc.RunScheduledInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) RunScheduledInstancesRequest added in v1.0.9 

func (c *EC2) RunScheduledInstancesRequest(input *RunScheduledInstancesInput) (req *request.Request, output *RunScheduledInstancesOutput)

RunScheduledInstancesRequest generates a "aws/request.Request" representing the client's request for the RunScheduledInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RunScheduledInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RunScheduledInstancesRequest method.
req, resp := client.RunScheduledInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) StartInstances 

func (c *EC2) StartInstances(input *StartInstancesInput) (*StartInstancesOutput, error)

Starts an Amazon EBS-backed AMI that you've previously stopped.

Instances that use Amazon EBS volumes as their root devices can be quickly stopped and started. When an instance is stopped, the compute resources are released and you are not billed for hourly instance usage. However, your root partition Amazon EBS volume remains, continues to persist your data, and you are charged for Amazon EBS volume usage. You can restart your instance at any time. Each time you transition an instance from stopped to started, Amazon EC2 charges a full instance hour, even if transitions happen multiple times within a single hour.

Before stopping an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM.

Performing this operation on an instance that uses an instance store as its root device returns an error.

For more information, see Stopping Instances (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Stop_Start.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.StartInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		AdditionalInfo: aws.String("String"),
		DryRun:         aws.Bool(true),
	}
	resp, err := svc.StartInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) StartInstancesRequest 

func (c *EC2) StartInstancesRequest(input *StartInstancesInput) (req *request.Request, output *StartInstancesOutput)

StartInstancesRequest generates a "aws/request.Request" representing the client's request for the StartInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the StartInstancesRequest method.
req, resp := client.StartInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) StopInstances 

func (c *EC2) StopInstances(input *StopInstancesInput) (*StopInstancesOutput, error)

Stops an Amazon EBS-backed instance.

We don't charge hourly usage for a stopped instance, or data transfer fees; however, your root partition Amazon EBS volume remains, continues to persist your data, and you are charged for Amazon EBS volume usage. Each time you transition an instance from stopped to started, Amazon EC2 charges a full instance hour, even if transitions happen multiple times within a single hour.

You can't start or stop Spot instances, and you can't stop instance store-backed instances.

When you stop an instance, we shut it down. You can restart your instance at any time. Before stopping an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM.

Stopping an instance is different to rebooting or terminating it. For example, when you stop an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted. For more information about the differences between rebooting, stopping, and terminating instances, see Instance Lifecycle (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) in the Amazon Elastic Compute Cloud User Guide.

When you stop an instance, we attempt to shut it down forcibly after a short while. If your instance appears stuck in the stopping state after a period of time, there may be an issue with the underlying host computer. For more information, see Troubleshooting Stopping Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesStopping.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.StopInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
		Force:  aws.Bool(true),
	}
	resp, err := svc.StopInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) StopInstancesRequest 

func (c *EC2) StopInstancesRequest(input *StopInstancesInput) (req *request.Request, output *StopInstancesOutput)

StopInstancesRequest generates a "aws/request.Request" representing the client's request for the StopInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StopInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the StopInstancesRequest method.
req, resp := client.StopInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) TerminateInstances 

func (c *EC2) TerminateInstances(input *TerminateInstancesInput) (*TerminateInstancesOutput, error)

Shuts down one or more instances. This operation is idempotent; if you terminate an instance more than once, each call succeeds.

If you specify multiple instances and the request fails (for example, because of a single incorrect instance ID), none of the instances are terminated.

Terminated instances remain visible after termination (for approximately one hour).

By default, Amazon EC2 deletes all EBS volumes that were attached when the instance launched. Volumes attached after instance launch continue running.

You can stop, start, and terminate EBS-backed instances. You can only terminate instance store-backed instances. What happens to an instance differs if you stop it or terminate it. For example, when you stop an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, any attached EBS volumes with the DeleteOnTermination block device mapping parameter set to true are automatically deleted. For more information about the differences between stopping and terminating instances, see Instance Lifecycle (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html) in the Amazon Elastic Compute Cloud User Guide.

For more information about troubleshooting, see Troubleshooting Terminating Your Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesShuttingDown.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.TerminateInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.TerminateInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) TerminateInstancesRequest 

func (c *EC2) TerminateInstancesRequest(input *TerminateInstancesInput) (req *request.Request, output *TerminateInstancesOutput)

TerminateInstancesRequest generates a "aws/request.Request" representing the client's request for the TerminateInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TerminateInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the TerminateInstancesRequest method.
req, resp := client.TerminateInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) UnassignPrivateIpAddresses added in v0.9.5 

func (c *EC2) UnassignPrivateIpAddresses(input *UnassignPrivateIpAddressesInput) (*UnassignPrivateIpAddressesOutput, error)

Unassigns one or more secondary private IP addresses from a network interface.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.UnassignPrivateIpAddressesInput{
		NetworkInterfaceId: aws.String("String"), // Required
		PrivateIpAddresses: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.UnassignPrivateIpAddresses(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) UnassignPrivateIpAddressesRequest added in v0.9.5 

func (c *EC2) UnassignPrivateIpAddressesRequest(input *UnassignPrivateIpAddressesInput) (req *request.Request, output *UnassignPrivateIpAddressesOutput)

UnassignPrivateIpAddressesRequest generates a "aws/request.Request" representing the client's request for the UnassignPrivateIpAddresses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UnassignPrivateIpAddresses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UnassignPrivateIpAddressesRequest method.
req, resp := client.UnassignPrivateIpAddressesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) UnmonitorInstances 

func (c *EC2) UnmonitorInstances(input *UnmonitorInstancesInput) (*UnmonitorInstancesOutput, error)

Disables monitoring for a running instance. For more information about monitoring instances, see Monitoring Your Instances and Volumes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch.html) in the Amazon Elastic Compute Cloud User Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ec2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ec2.New(sess)

	params := &ec2.UnmonitorInstancesInput{
		InstanceIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		DryRun: aws.Bool(true),
	}
	resp, err := svc.UnmonitorInstances(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*EC2) UnmonitorInstancesRequest 

func (c *EC2) UnmonitorInstancesRequest(input *UnmonitorInstancesInput) (req *request.Request, output *UnmonitorInstancesOutput)

UnmonitorInstancesRequest generates a "aws/request.Request" representing the client's request for the UnmonitorInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UnmonitorInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the UnmonitorInstancesRequest method.
req, resp := client.UnmonitorInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*EC2) WaitUntilBundleTaskComplete added in v0.10.3 

func (c *EC2) WaitUntilBundleTaskComplete(input *DescribeBundleTasksInput) error

func (*EC2) WaitUntilConversionTaskCancelled added in v0.10.3 

func (c *EC2) WaitUntilConversionTaskCancelled(input *DescribeConversionTasksInput) error

func (*EC2) WaitUntilConversionTaskCompleted added in v0.10.3 

func (c *EC2) WaitUntilConversionTaskCompleted(input *DescribeConversionTasksInput) error

func (*EC2) WaitUntilConversionTaskDeleted added in v0.10.3 

func (c *EC2) WaitUntilConversionTaskDeleted(input *DescribeConversionTasksInput) error

func (*EC2) WaitUntilCustomerGatewayAvailable added in v0.10.3 

func (c *EC2) WaitUntilCustomerGatewayAvailable(input *DescribeCustomerGatewaysInput) error

func (*EC2) WaitUntilExportTaskCancelled added in v0.10.3 

func (c *EC2) WaitUntilExportTaskCancelled(input *DescribeExportTasksInput) error

func (*EC2) WaitUntilExportTaskCompleted added in v0.10.3 

func (c *EC2) WaitUntilExportTaskCompleted(input *DescribeExportTasksInput) error

func (*EC2) WaitUntilImageAvailable added in v0.10.3 

func (c *EC2) WaitUntilImageAvailable(input *DescribeImagesInput) error

func (*EC2) WaitUntilImageExists added in v1.1.14 

func (c *EC2) WaitUntilImageExists(input *DescribeImagesInput) error

func (*EC2) WaitUntilInstanceExists added in v0.10.3 

func (c *EC2) WaitUntilInstanceExists(input *DescribeInstancesInput) error

func (*EC2) WaitUntilInstanceRunning added in v0.10.3 

func (c *EC2) WaitUntilInstanceRunning(input *DescribeInstancesInput) error

func (*EC2) WaitUntilInstanceStatusOk added in v0.10.3 

func (c *EC2) WaitUntilInstanceStatusOk(input *DescribeInstanceStatusInput) error

func (*EC2) WaitUntilInstanceStopped added in v0.10.3 

func (c *EC2) WaitUntilInstanceStopped(input *DescribeInstancesInput) error

func (*EC2) WaitUntilInstanceTerminated added in v0.10.3 

func (c *EC2) WaitUntilInstanceTerminated(input *DescribeInstancesInput) error

func (*EC2) WaitUntilKeyPairExists added in v0.10.3 

func (c *EC2) WaitUntilKeyPairExists(input *DescribeKeyPairsInput) error

func (*EC2) WaitUntilNatGatewayAvailable added in v1.1.8 

func (c *EC2) WaitUntilNatGatewayAvailable(input *DescribeNatGatewaysInput) error

func (*EC2) WaitUntilNetworkInterfaceAvailable added in v0.10.3 

func (c *EC2) WaitUntilNetworkInterfaceAvailable(input *DescribeNetworkInterfacesInput) error

func (*EC2) WaitUntilPasswordDataAvailable added in v0.10.3 

func (c *EC2) WaitUntilPasswordDataAvailable(input *GetPasswordDataInput) error

func (*EC2) WaitUntilSnapshotCompleted added in v0.10.3 

func (c *EC2) WaitUntilSnapshotCompleted(input *DescribeSnapshotsInput) error

func (*EC2) WaitUntilSpotInstanceRequestFulfilled added in v0.10.3 

func (c *EC2) WaitUntilSpotInstanceRequestFulfilled(input *DescribeSpotInstanceRequestsInput) error

func (*EC2) WaitUntilSubnetAvailable added in v0.10.3 

func (c *EC2) WaitUntilSubnetAvailable(input *DescribeSubnetsInput) error

func (*EC2) WaitUntilSystemStatusOk added in v0.10.3 

func (c *EC2) WaitUntilSystemStatusOk(input *DescribeInstanceStatusInput) error

func (*EC2) WaitUntilVolumeAvailable added in v0.10.3 

func (c *EC2) WaitUntilVolumeAvailable(input *DescribeVolumesInput) error

func (*EC2) WaitUntilVolumeDeleted added in v0.10.3 

func (c *EC2) WaitUntilVolumeDeleted(input *DescribeVolumesInput) error

func (*EC2) WaitUntilVolumeInUse added in v0.10.3 

func (c *EC2) WaitUntilVolumeInUse(input *DescribeVolumesInput) error

func (*EC2) WaitUntilVpcAvailable added in v0.10.3 

func (c *EC2) WaitUntilVpcAvailable(input *DescribeVpcsInput) error

func (*EC2) WaitUntilVpcExists added in v1.1.36 

func (c *EC2) WaitUntilVpcExists(input *DescribeVpcsInput) error

func (*EC2) WaitUntilVpcPeeringConnectionExists added in v1.1.8 

func (c *EC2) WaitUntilVpcPeeringConnectionExists(input *DescribeVpcPeeringConnectionsInput) error

func (*EC2) WaitUntilVpnConnectionAvailable added in v0.10.3 

func (c *EC2) WaitUntilVpnConnectionAvailable(input *DescribeVpnConnectionsInput) error

func (*EC2) WaitUntilVpnConnectionDeleted added in v0.10.3 

func (c *EC2) WaitUntilVpnConnectionDeleted(input *DescribeVpnConnectionsInput) error

type EbsBlockDevice added in v0.9.5 

type EbsBlockDevice struct {

	// Indicates whether the EBS volume is deleted on instance termination.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// Indicates whether the EBS volume is encrypted. Encrypted Amazon EBS volumes
	// may only be attached to instances that support Amazon EBS encryption.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// The number of I/O operations per second (IOPS) that the volume supports.
	// For io1, this represents the number of IOPS that are provisioned for the
	// volume. For gp2, this represents the baseline performance of the volume and
	// the rate at which the volume accumulates I/O credits for bursting. For more
	// information about General Purpose SSD baseline performance, I/O credits,
	// and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	//
	// Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for
	// gp2 volumes.
	//
	// Condition: This parameter is required for requests to create io1 volumes;
	// it is not used in requests to create gp2, st1, sc1, or standard volumes.
	Iops *int64 `locationName:"iops" type:"integer"`

	// The ID of the snapshot.
	SnapshotId *string `locationName:"snapshotId" type:"string"`

	// The size of the volume, in GiB.
	//
	// Constraints: 1-16384 for General Purpose SSD (gp2), 4-16384 for Provisioned
	// IOPS SSD (io1), 500-16384 for Throughput Optimized HDD (st1), 500-16384 for
	// Cold HDD (sc1), and 1-1024 for Magnetic (standard) volumes. If you specify
	// a snapshot, the volume size must be equal to or larger than the snapshot
	// size.
	//
	// Default: If you're creating the volume from a snapshot and don't specify
	// a volume size, the default is the snapshot size.
	VolumeSize *int64 `locationName:"volumeSize" type:"integer"`

	// The volume type: gp2, io1, st1, sc1, or standard.
	//
	// Default: standard
	VolumeType *string `locationName:"volumeType" type:"string" enum:"VolumeType"`
	// contains filtered or unexported fields
}

Describes a block device for an EBS volume.

func (EbsBlockDevice) GoString added in v0.9.5 

func (s EbsBlockDevice) GoString() string

GoString returns the string representation

func (EbsBlockDevice) String added in v0.9.5 

func (s EbsBlockDevice) String() string

String returns the string representation

type EbsInstanceBlockDevice added in v0.9.5 

type EbsInstanceBlockDevice struct {

	// The time stamp when the attachment initiated.
	AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"`

	// Indicates whether the volume is deleted on instance termination.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The attachment state.
	Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"`

	// The ID of the EBS volume.
	VolumeId *string `locationName:"volumeId" type:"string"`
	// contains filtered or unexported fields
}

Describes a parameter used to set up an EBS volume in a block device mapping.

func (EbsInstanceBlockDevice) GoString added in v0.9.5 

func (s EbsInstanceBlockDevice) GoString() string

GoString returns the string representation

func (EbsInstanceBlockDevice) String added in v0.9.5 

func (s EbsInstanceBlockDevice) String() string

String returns the string representation

type EbsInstanceBlockDeviceSpecification added in v0.9.5 

type EbsInstanceBlockDeviceSpecification struct {

	// Indicates whether the volume is deleted on instance termination.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The ID of the EBS volume.
	VolumeId *string `locationName:"volumeId" type:"string"`
	// contains filtered or unexported fields
}

Describes information used to set up an EBS volume specified in a block device mapping.

func (EbsInstanceBlockDeviceSpecification) GoString added in v0.9.5 

func (s EbsInstanceBlockDeviceSpecification) GoString() string

GoString returns the string representation

func (EbsInstanceBlockDeviceSpecification) String added in v0.9.5 

func (s EbsInstanceBlockDeviceSpecification) String() string

String returns the string representation

type EnableVgwRoutePropagationInput added in v0.9.5 

type EnableVgwRoutePropagationInput struct {

	// The ID of the virtual private gateway.
	GatewayId *string `type:"string" required:"true"`

	// The ID of the route table.
	RouteTableId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for EnableVgwRoutePropagation.

func (EnableVgwRoutePropagationInput) GoString added in v0.9.5 

func (s EnableVgwRoutePropagationInput) GoString() string

GoString returns the string representation

func (EnableVgwRoutePropagationInput) String added in v0.9.5 

func (s EnableVgwRoutePropagationInput) String() string

String returns the string representation

func (*EnableVgwRoutePropagationInput) Validate added in v1.1.21 

func (s *EnableVgwRoutePropagationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableVgwRoutePropagationOutput added in v0.9.5 

type EnableVgwRoutePropagationOutput struct {
	// contains filtered or unexported fields
}

func (EnableVgwRoutePropagationOutput) GoString added in v0.9.5 

func (s EnableVgwRoutePropagationOutput) GoString() string

GoString returns the string representation

func (EnableVgwRoutePropagationOutput) String added in v0.9.5 

func (s EnableVgwRoutePropagationOutput) String() string

String returns the string representation

type EnableVolumeIOInput 

type EnableVolumeIOInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the volume.
	VolumeId *string `locationName:"volumeId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for EnableVolumeIO.

func (EnableVolumeIOInput) GoString added in v0.6.5 

func (s EnableVolumeIOInput) GoString() string

GoString returns the string representation

func (EnableVolumeIOInput) String added in v0.6.5 

func (s EnableVolumeIOInput) String() string

String returns the string representation

func (*EnableVolumeIOInput) Validate added in v1.1.21 

func (s *EnableVolumeIOInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableVolumeIOOutput 

type EnableVolumeIOOutput struct {
	// contains filtered or unexported fields
}

func (EnableVolumeIOOutput) GoString added in v0.6.5 

func (s EnableVolumeIOOutput) GoString() string

GoString returns the string representation

func (EnableVolumeIOOutput) String added in v0.6.5 

func (s EnableVolumeIOOutput) String() string

String returns the string representation

type EnableVpcClassicLinkDnsSupportInput added in v1.0.8 

type EnableVpcClassicLinkDnsSupportInput struct {

	// The ID of the VPC.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for EnableVpcClassicLinkDnsSupport.

func (EnableVpcClassicLinkDnsSupportInput) GoString added in v1.0.8 

func (s EnableVpcClassicLinkDnsSupportInput) GoString() string

GoString returns the string representation

func (EnableVpcClassicLinkDnsSupportInput) String added in v1.0.8 

func (s EnableVpcClassicLinkDnsSupportInput) String() string

String returns the string representation

type EnableVpcClassicLinkDnsSupportOutput added in v1.0.8 

type EnableVpcClassicLinkDnsSupportOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of EnableVpcClassicLinkDnsSupport.

func (EnableVpcClassicLinkDnsSupportOutput) GoString added in v1.0.8 

func (s EnableVpcClassicLinkDnsSupportOutput) GoString() string

GoString returns the string representation

func (EnableVpcClassicLinkDnsSupportOutput) String added in v1.0.8 

func (s EnableVpcClassicLinkDnsSupportOutput) String() string

String returns the string representation

type EnableVpcClassicLinkInput added in v0.9.5 

type EnableVpcClassicLinkInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for EnableVpcClassicLink.

func (EnableVpcClassicLinkInput) GoString added in v0.9.5 

func (s EnableVpcClassicLinkInput) GoString() string

GoString returns the string representation

func (EnableVpcClassicLinkInput) String added in v0.9.5 

func (s EnableVpcClassicLinkInput) String() string

String returns the string representation

func (*EnableVpcClassicLinkInput) Validate added in v1.1.21 

func (s *EnableVpcClassicLinkInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableVpcClassicLinkOutput added in v0.9.5 

type EnableVpcClassicLinkOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of EnableVpcClassicLink.

func (EnableVpcClassicLinkOutput) GoString added in v0.9.5 

func (s EnableVpcClassicLinkOutput) GoString() string

GoString returns the string representation

func (EnableVpcClassicLinkOutput) String added in v0.9.5 

func (s EnableVpcClassicLinkOutput) String() string

String returns the string representation

type EventInformation 

type EventInformation struct {

	// The description of the event.
	EventDescription *string `locationName:"eventDescription" type:"string"`

	// The event.
	//
	// The following are the error events.
	//
	//    iamFleetRoleInvalid - The Spot fleet did not have the required permissions
	// either to launch or terminate an instance.
	//
	//    launchSpecTemporarilyBlacklisted - The configuration is not valid and
	// several attempts to launch instances have failed. For more information, see
	// the description of the event.
	//
	//    spotFleetRequestConfigurationInvalid - The configuration is not valid.
	// For more information, see the description of the event.
	//
	//    spotInstanceCountLimitExceeded - You've reached the limit on the number
	// of Spot instances that you can launch.
	//
	//   The following are the fleetRequestChange events.
	//
	//    active - The Spot fleet has been validated and Amazon EC2 is attempting
	// to maintain the target number of running Spot instances.
	//
	//    cancelled - The Spot fleet is canceled and has no running Spot instances.
	// The Spot fleet will be deleted two days after its instances were terminated.
	//
	//    cancelled_running - The Spot fleet is canceled and will not launch additional
	// Spot instances, but its existing Spot instances continue to run until they
	// are interrupted or terminated.
	//
	//    cancelled_terminating - The Spot fleet is canceled and its Spot instances
	// are terminating.
	//
	//    expired - The Spot fleet request has expired. A subsequent event indicates
	// that the instances were terminated, if the request was created with TerminateInstancesWithExpiration
	// set.
	//
	//    modify_in_progress - A request to modify the Spot fleet request was accepted
	// and is in progress.
	//
	//    modify_successful - The Spot fleet request was modified.
	//
	//    price_update - The bid price for a launch configuration was adjusted
	// because it was too high. This change is permanent.
	//
	//    submitted - The Spot fleet request is being evaluated and Amazon EC2
	// is preparing to launch the target number of Spot instances.
	//
	//   The following are the instanceChange events.
	//
	//    launched - A bid was fulfilled and a new instance was launched.
	//
	//    terminated - An instance was terminated by the user.
	EventSubType *string `locationName:"eventSubType" type:"string"`

	// The ID of the instance. This information is available only for instanceChange
	// events.
	InstanceId *string `locationName:"instanceId" type:"string"`
	// contains filtered or unexported fields
}

Describes a Spot fleet event.

func (EventInformation) GoString added in v0.6.5 

func (s EventInformation) GoString() string

GoString returns the string representation

func (EventInformation) String added in v0.6.5 

func (s EventInformation) String() string

String returns the string representation

type ExportTask 

type ExportTask struct {

	// A description of the resource being exported.
	Description *string `locationName:"description" type:"string"`

	// The ID of the export task.
	ExportTaskId *string `locationName:"exportTaskId" type:"string"`

	// Information about the export task.
	ExportToS3Task *ExportToS3Task `locationName:"exportToS3" type:"structure"`

	// Information about the instance to export.
	InstanceExportDetails *InstanceExportDetails `locationName:"instanceExport" type:"structure"`

	// The state of the export task.
	State *string `locationName:"state" type:"string" enum:"ExportTaskState"`

	// The status message related to the export task.
	StatusMessage *string `locationName:"statusMessage" type:"string"`
	// contains filtered or unexported fields
}

Describes an instance export task.

func (ExportTask) GoString added in v0.6.5 

func (s ExportTask) GoString() string

GoString returns the string representation

func (ExportTask) String added in v0.6.5 

func (s ExportTask) String() string

String returns the string representation

type ExportToS3Task 

type ExportToS3Task struct {

	// The container format used to combine disk images with metadata (such as OVF).
	// If absent, only the disk image is exported.
	ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"`

	// The format for the exported image.
	DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"`

	// The S3 bucket for the destination image. The destination bucket must exist
	// and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com.
	S3Bucket *string `locationName:"s3Bucket" type:"string"`

	// The encryption key for your S3 bucket.
	S3Key *string `locationName:"s3Key" type:"string"`
	// contains filtered or unexported fields
}

Describes the format and location for an instance export task.

func (ExportToS3Task) GoString added in v0.6.5 

func (s ExportToS3Task) GoString() string

GoString returns the string representation

func (ExportToS3Task) String added in v0.6.5 

func (s ExportToS3Task) String() string

String returns the string representation

type ExportToS3TaskSpecification 

type ExportToS3TaskSpecification struct {

	// The container format used to combine disk images with metadata (such as OVF).
	// If absent, only the disk image is exported.
	ContainerFormat *string `locationName:"containerFormat" type:"string" enum:"ContainerFormat"`

	// The format for the exported image.
	DiskImageFormat *string `locationName:"diskImageFormat" type:"string" enum:"DiskImageFormat"`

	// The S3 bucket for the destination image. The destination bucket must exist
	// and grant WRITE and READ_ACP permissions to the AWS account vm-import-export@amazon.com.
	S3Bucket *string `locationName:"s3Bucket" type:"string"`

	// The image is written to a single object in the S3 bucket at the S3 key s3prefix
	// + exportTaskId + '.' + diskImageFormat.
	S3Prefix *string `locationName:"s3Prefix" type:"string"`
	// contains filtered or unexported fields
}

Describes an instance export task.

func (ExportToS3TaskSpecification) GoString added in v0.6.5 

func (s ExportToS3TaskSpecification) GoString() string

GoString returns the string representation

func (ExportToS3TaskSpecification) String added in v0.6.5 

func (s ExportToS3TaskSpecification) String() string

String returns the string representation

type Filter 

type Filter struct {

	// The name of the filter. Filter names are case-sensitive.
	Name *string `type:"string"`

	// One or more filter values. Filter values are case-sensitive.
	Values []*string `locationName:"Value" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

A filter name and value pair that is used to return a more specific list of results. Filters can be used to match a set of resources by various criteria, such as tags, attributes, or IDs.

func (Filter) GoString added in v0.6.5 

func (s Filter) GoString() string

GoString returns the string representation

func (Filter) String added in v0.6.5 

func (s Filter) String() string

String returns the string representation

type FlowLog added in v0.6.2 

type FlowLog struct {

	// The date and time the flow log was created.
	CreationTime *time.Time `locationName:"creationTime" type:"timestamp" timestampFormat:"iso8601"`

	// Information about the error that occurred. Rate limited indicates that CloudWatch
	// logs throttling has been applied for one or more network interfaces, or that
	// you've reached the limit on the number of CloudWatch Logs log groups that
	// you can create. Access error indicates that the IAM role associated with
	// the flow log does not have sufficient permissions to publish to CloudWatch
	// Logs. Unknown error indicates an internal error.
	DeliverLogsErrorMessage *string `locationName:"deliverLogsErrorMessage" type:"string"`

	// The ARN of the IAM role that posts logs to CloudWatch Logs.
	DeliverLogsPermissionArn *string `locationName:"deliverLogsPermissionArn" type:"string"`

	// The status of the logs delivery (SUCCESS | FAILED).
	DeliverLogsStatus *string `locationName:"deliverLogsStatus" type:"string"`

	// The flow log ID.
	FlowLogId *string `locationName:"flowLogId" type:"string"`

	// The status of the flow log (ACTIVE).
	FlowLogStatus *string `locationName:"flowLogStatus" type:"string"`

	// The name of the flow log group.
	LogGroupName *string `locationName:"logGroupName" type:"string"`

	// The ID of the resource on which the flow log was created.
	ResourceId *string `locationName:"resourceId" type:"string"`

	// The type of traffic captured for the flow log.
	TrafficType *string `locationName:"trafficType" type:"string" enum:"TrafficType"`
	// contains filtered or unexported fields
}

Describes a flow log.

func (FlowLog) GoString added in v0.6.5 

func (s FlowLog) GoString() string

GoString returns the string representation

func (FlowLog) String added in v0.6.5 

func (s FlowLog) String() string

String returns the string representation

type GetConsoleOutputInput 

type GetConsoleOutputInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for GetConsoleOutput.

func (GetConsoleOutputInput) GoString added in v0.6.5 

func (s GetConsoleOutputInput) GoString() string

GoString returns the string representation

func (GetConsoleOutputInput) String added in v0.6.5 

func (s GetConsoleOutputInput) String() string

String returns the string representation

func (*GetConsoleOutputInput) Validate added in v1.1.21 

func (s *GetConsoleOutputInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetConsoleOutputOutput 

type GetConsoleOutputOutput struct {

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The console output, Base64-encoded. If using a command line tool, the tool
	// decodes the output for you.
	Output *string `locationName:"output" type:"string"`

	// The time the output was last updated.
	Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Contains the output of GetConsoleOutput.

func (GetConsoleOutputOutput) GoString added in v0.6.5 

func (s GetConsoleOutputOutput) GoString() string

GoString returns the string representation

func (GetConsoleOutputOutput) String added in v0.6.5 

func (s GetConsoleOutputOutput) String() string

String returns the string representation

type GetConsoleScreenshotInput added in v1.1.30 

type GetConsoleScreenshotInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The ID of the instance.
	InstanceId *string `type:"string" required:"true"`

	// When set to true, acts as keystroke input and wakes up an instance that's
	// in standby or "sleep" mode.
	WakeUp *bool `type:"boolean"`
	// contains filtered or unexported fields
}

Contains the parameters for the request.

func (GetConsoleScreenshotInput) GoString added in v1.1.30 

func (s GetConsoleScreenshotInput) GoString() string

GoString returns the string representation

func (GetConsoleScreenshotInput) String added in v1.1.30 

func (s GetConsoleScreenshotInput) String() string

String returns the string representation

func (*GetConsoleScreenshotInput) Validate added in v1.1.30 

func (s *GetConsoleScreenshotInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetConsoleScreenshotOutput added in v1.1.30 

type GetConsoleScreenshotOutput struct {

	// The data that comprises the image.
	ImageData *string `locationName:"imageData" type:"string"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of the request.

func (GetConsoleScreenshotOutput) GoString added in v1.1.30 

func (s GetConsoleScreenshotOutput) GoString() string

GoString returns the string representation

func (GetConsoleScreenshotOutput) String added in v1.1.30 

func (s GetConsoleScreenshotOutput) String() string

String returns the string representation

type GetHostReservationPurchasePreviewInput added in v1.4.3 

type GetHostReservationPurchasePreviewInput struct {

	// The ID/s of the Dedicated Host/s that the reservation will be associated
	// with.
	HostIdSet []*string `locationNameList:"item" type:"list" required:"true"`

	// The offering ID of the reservation.
	OfferingId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (GetHostReservationPurchasePreviewInput) GoString added in v1.4.3 

func (s GetHostReservationPurchasePreviewInput) GoString() string

GoString returns the string representation

func (GetHostReservationPurchasePreviewInput) String added in v1.4.3 

func (s GetHostReservationPurchasePreviewInput) String() string

String returns the string representation

func (*GetHostReservationPurchasePreviewInput) Validate added in v1.4.3 

func (s *GetHostReservationPurchasePreviewInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHostReservationPurchasePreviewOutput added in v1.4.3 

type GetHostReservationPurchasePreviewOutput struct {

	// The currency in which the totalUpfrontPrice and totalHourlyPrice amounts
	// are specified. At this time, the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The purchase information of the Dedicated Host Reservation and the Dedicated
	// Hosts associated with it.
	Purchase []*Purchase `locationName:"purchase" type:"list"`

	// The potential total hourly price of the reservation per hour.
	TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"`

	// The potential total upfront price. This is billed immediately.
	TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"`
	// contains filtered or unexported fields
}

func (GetHostReservationPurchasePreviewOutput) GoString added in v1.4.3 

func (s GetHostReservationPurchasePreviewOutput) GoString() string

GoString returns the string representation

func (GetHostReservationPurchasePreviewOutput) String added in v1.4.3 

func (s GetHostReservationPurchasePreviewOutput) String() string

String returns the string representation

type GetPasswordDataInput 

type GetPasswordDataInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the Windows instance.
	InstanceId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for GetPasswordData.

func (GetPasswordDataInput) GoString added in v0.6.5 

func (s GetPasswordDataInput) GoString() string

GoString returns the string representation

func (GetPasswordDataInput) String added in v0.6.5 

func (s GetPasswordDataInput) String() string

String returns the string representation

func (*GetPasswordDataInput) Validate added in v1.1.21 

func (s *GetPasswordDataInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetPasswordDataOutput 

type GetPasswordDataOutput struct {

	// The ID of the Windows instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The password of the instance.
	PasswordData *string `locationName:"passwordData" type:"string"`

	// The time the data was last updated.
	Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Contains the output of GetPasswordData.

func (GetPasswordDataOutput) GoString added in v0.6.5 

func (s GetPasswordDataOutput) GoString() string

GoString returns the string representation

func (GetPasswordDataOutput) String added in v0.6.5 

func (s GetPasswordDataOutput) String() string

String returns the string representation

type GetReservedInstancesExchangeQuoteInput added in v1.4.15 

type GetReservedInstancesExchangeQuoteInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The ID/s of the Convertible Reserved Instances you want to exchange.
	ReservedInstanceIds []*string `locationName:"ReservedInstanceId" locationNameList:"ReservedInstanceId" type:"list" required:"true"`

	// The configuration requirements of the Convertible Reserved Instances you
	// want in exchange for your current Convertible Reserved Instances.
	TargetConfigurations []*TargetConfigurationRequest `locationName:"TargetConfiguration" locationNameList:"TargetConfigurationRequest" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for GetReservedInstanceExchangeQuote.

func (GetReservedInstancesExchangeQuoteInput) GoString added in v1.4.15 

func (s GetReservedInstancesExchangeQuoteInput) GoString() string

GoString returns the string representation

func (GetReservedInstancesExchangeQuoteInput) String added in v1.4.15 

func (s GetReservedInstancesExchangeQuoteInput) String() string

String returns the string representation

func (*GetReservedInstancesExchangeQuoteInput) Validate added in v1.4.15 

func (s *GetReservedInstancesExchangeQuoteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetReservedInstancesExchangeQuoteOutput added in v1.4.15 

type GetReservedInstancesExchangeQuoteOutput struct {

	// The currency of the transaction.
	CurrencyCode *string `locationName:"currencyCode" type:"string"`

	// If true, the exchange is valid. If false, the exchange cannot be performed.
	IsValidExchange *bool `locationName:"isValidExchange" type:"boolean"`

	// The new end date of the reservation term.
	OutputReservedInstancesWillExpireAt *time.Time `locationName:"outputReservedInstancesWillExpireAt" type:"timestamp" timestampFormat:"iso8601"`

	// The total true upfront charge for the exchange.
	PaymentDue *string `locationName:"paymentDue" type:"string"`

	// The cost associated with the Reserved Instance.
	ReservedInstanceValueRollup *ReservationValue `locationName:"reservedInstanceValueRollup" type:"structure"`

	// The configuration of your Convertible Reserved Instances.
	ReservedInstanceValueSet []*ReservedInstanceReservationValue `locationName:"reservedInstanceValueSet" locationNameList:"item" type:"list"`

	// The cost associated with the Reserved Instance.
	TargetConfigurationValueRollup *ReservationValue `locationName:"targetConfigurationValueRollup" type:"structure"`

	// The values of the target Convertible Reserved Instances.
	TargetConfigurationValueSet []*TargetReservationValue `locationName:"targetConfigurationValueSet" locationNameList:"item" type:"list"`

	// Describes the reason why the exchange can not be completed.
	ValidationFailureReason *string `locationName:"validationFailureReason" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of GetReservedInstancesExchangeQuote.

func (GetReservedInstancesExchangeQuoteOutput) GoString added in v1.4.15 

func (s GetReservedInstancesExchangeQuoteOutput) GoString() string

GoString returns the string representation

func (GetReservedInstancesExchangeQuoteOutput) String added in v1.4.15 

func (s GetReservedInstancesExchangeQuoteOutput) String() string

String returns the string representation

type GroupIdentifier 

type GroupIdentifier struct {

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string"`

	// The name of the security group.
	GroupName *string `locationName:"groupName" type:"string"`
	// contains filtered or unexported fields
}

Describes a security group.

func (GroupIdentifier) GoString added in v0.6.5 

func (s GroupIdentifier) GoString() string

GoString returns the string representation

func (GroupIdentifier) String added in v0.6.5 

func (s GroupIdentifier) String() string

String returns the string representation

type HistoryRecord 

type HistoryRecord struct {

	// Information about the event.
	EventInformation *EventInformation `locationName:"eventInformation" type:"structure" required:"true"`

	// The event type.
	//
	//    error - Indicates an error with the Spot fleet request.
	//
	//    fleetRequestChange - Indicates a change in the status or configuration
	// of the Spot fleet request.
	//
	//    instanceChange - Indicates that an instance was launched or terminated.
	EventType *string `locationName:"eventType" type:"string" required:"true" enum:"EventType"`

	// The date and time of the event, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

Describes an event in the history of the Spot fleet request.

func (HistoryRecord) GoString added in v0.6.5 

func (s HistoryRecord) GoString() string

GoString returns the string representation

func (HistoryRecord) String added in v0.6.5 

func (s HistoryRecord) String() string

String returns the string representation

type Host added in v1.0.1 

type Host struct {

	// Whether auto-placement is on or off.
	AutoPlacement *string `locationName:"autoPlacement" type:"string" enum:"AutoPlacement"`

	// The Availability Zone of the Dedicated Host.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The number of new instances that can be launched onto the Dedicated Host.
	AvailableCapacity *AvailableCapacity `locationName:"availableCapacity" type:"structure"`

	// Unique, case-sensitive identifier you provide to ensure idempotency of the
	// request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The ID of the Dedicated Host.
	HostId *string `locationName:"hostId" type:"string"`

	// The hardware specifications of the Dedicated Host.
	HostProperties *HostProperties `locationName:"hostProperties" type:"structure"`

	// The reservation ID of the Dedicated Host. This returns a null response if
	// the Dedicated Host doesn't have an associated reservation.
	HostReservationId *string `locationName:"hostReservationId" type:"string"`

	// The IDs and instance type that are currently running on the Dedicated Host.
	Instances []*HostInstance `locationName:"instances" locationNameList:"item" type:"list"`

	// The Dedicated Host's state.
	State *string `locationName:"state" type:"string" enum:"AllocationState"`
	// contains filtered or unexported fields
}

Describes the properties of the Dedicated Host.

func (Host) GoString added in v1.0.1 

func (s Host) GoString() string

GoString returns the string representation

func (Host) String added in v1.0.1 

func (s Host) String() string

String returns the string representation

type HostInstance added in v1.0.1 

type HostInstance struct {

	// the IDs of instances that are running on the Dedicated Host.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The instance type size (for example, m3.medium) of the running instance.
	InstanceType *string `locationName:"instanceType" type:"string"`
	// contains filtered or unexported fields
}

Describes an instance running on a Dedicated Host.

func (HostInstance) GoString added in v1.0.1 

func (s HostInstance) GoString() string

GoString returns the string representation

func (HostInstance) String added in v1.0.1 

func (s HostInstance) String() string

String returns the string representation

type HostOffering added in v1.4.3 

type HostOffering struct {

	// The currency of the offering.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The duration of the offering (in seconds).
	Duration *int64 `locationName:"duration" type:"integer"`

	// The hourly price of the offering.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The instance family of the offering.
	InstanceFamily *string `locationName:"instanceFamily" type:"string"`

	// The ID of the offering.
	OfferingId *string `locationName:"offeringId" type:"string"`

	// The available payment option.
	PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"`

	// The upfront price of the offering. Does not apply to No Upfront offerings.
	UpfrontPrice *string `locationName:"upfrontPrice" type:"string"`
	// contains filtered or unexported fields
}

Details about the Dedicated Host Reservation offering.

func (HostOffering) GoString added in v1.4.3 

func (s HostOffering) GoString() string

GoString returns the string representation

func (HostOffering) String added in v1.4.3 

func (s HostOffering) String() string

String returns the string representation

type HostProperties added in v1.0.1 

type HostProperties struct {

	// The number of cores on the Dedicated Host.
	Cores *int64 `locationName:"cores" type:"integer"`

	// The instance type size that the Dedicated Host supports (for example, m3.medium).
	InstanceType *string `locationName:"instanceType" type:"string"`

	// The number of sockets on the Dedicated Host.
	Sockets *int64 `locationName:"sockets" type:"integer"`

	// The number of vCPUs on the Dedicated Host.
	TotalVCpus *int64 `locationName:"totalVCpus" type:"integer"`
	// contains filtered or unexported fields
}

Describes properties of a Dedicated Host.

func (HostProperties) GoString added in v1.0.1 

func (s HostProperties) GoString() string

GoString returns the string representation

func (HostProperties) String added in v1.0.1 

func (s HostProperties) String() string

String returns the string representation

type HostReservation added in v1.4.3 

type HostReservation struct {

	// The number of Dedicated Hosts the reservation is associated with.
	Count *int64 `locationName:"count" type:"integer"`

	// The currency in which the upfrontPrice and hourlyPrice amounts are specified.
	// At this time, the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The length of the reservation's term, specified in seconds. Can be 31536000
	// (1 year) | 94608000 (3 years).
	Duration *int64 `locationName:"duration" type:"integer"`

	// The date and time that the reservation ends.
	End *time.Time `locationName:"end" type:"timestamp" timestampFormat:"iso8601"`

	// The IDs of the Dedicated Hosts associated with the reservation.
	HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"`

	// The ID of the reservation that specifies the associated Dedicated Hosts.
	HostReservationId *string `locationName:"hostReservationId" type:"string"`

	// The hourly price of the reservation.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The instance family of the Dedicated Host Reservation. The instance family
	// on the Dedicated Host must be the same in order for it to benefit from the
	// reservation.
	InstanceFamily *string `locationName:"instanceFamily" type:"string"`

	// The ID of the reservation. This remains the same regardless of which Dedicated
	// Hosts are associated with it.
	OfferingId *string `locationName:"offeringId" type:"string"`

	// The payment option selected for this reservation.
	PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"`

	// The date and time that the reservation started.
	Start *time.Time `locationName:"start" type:"timestamp" timestampFormat:"iso8601"`

	// The state of the reservation.
	State *string `locationName:"state" type:"string" enum:"ReservationState"`

	// The upfront price of the reservation.
	UpfrontPrice *string `locationName:"upfrontPrice" type:"string"`
	// contains filtered or unexported fields
}

Details about the Dedicated Host Reservation and associated Dedicated Hosts.

func (HostReservation) GoString added in v1.4.3 

func (s HostReservation) GoString() string

GoString returns the string representation

func (HostReservation) String added in v1.4.3 

func (s HostReservation) String() string

String returns the string representation

type IamInstanceProfile added in v0.9.5 

type IamInstanceProfile struct {

	// The Amazon Resource Name (ARN) of the instance profile.
	Arn *string `locationName:"arn" type:"string"`

	// The ID of the instance profile.
	Id *string `locationName:"id" type:"string"`
	// contains filtered or unexported fields
}

Describes an IAM instance profile.

func (IamInstanceProfile) GoString added in v0.9.5 

func (s IamInstanceProfile) GoString() string

GoString returns the string representation

func (IamInstanceProfile) String added in v0.9.5 

func (s IamInstanceProfile) String() string

String returns the string representation

type IamInstanceProfileSpecification added in v0.9.5 

type IamInstanceProfileSpecification struct {

	// The Amazon Resource Name (ARN) of the instance profile.
	Arn *string `locationName:"arn" type:"string"`

	// The name of the instance profile.
	Name *string `locationName:"name" type:"string"`
	// contains filtered or unexported fields
}

Describes an IAM instance profile.

func (IamInstanceProfileSpecification) GoString added in v0.9.5 

func (s IamInstanceProfileSpecification) GoString() string

GoString returns the string representation

func (IamInstanceProfileSpecification) String added in v0.9.5 

func (s IamInstanceProfileSpecification) String() string

String returns the string representation

type IcmpTypeCode added in v0.9.5 

type IcmpTypeCode struct {

	// The ICMP type. A value of -1 means all types.
	Code *int64 `locationName:"code" type:"integer"`

	// The ICMP code. A value of -1 means all codes for the specified ICMP type.
	Type *int64 `locationName:"type" type:"integer"`
	// contains filtered or unexported fields
}

Describes the ICMP type and code.

func (IcmpTypeCode) GoString added in v0.9.5 

func (s IcmpTypeCode) GoString() string

GoString returns the string representation

func (IcmpTypeCode) String added in v0.9.5 

func (s IcmpTypeCode) String() string

String returns the string representation

type IdFormat added in v1.0.1 

type IdFormat struct {

	// The date in UTC at which you are permanently switched over to using longer
	// IDs. If a deadline is not yet available for this resource type, this field
	// is not returned.
	Deadline *time.Time `locationName:"deadline" type:"timestamp" timestampFormat:"iso8601"`

	// The type of resource.
	Resource *string `locationName:"resource" type:"string"`

	// Indicates whether longer IDs (17-character IDs) are enabled for the resource.
	UseLongIds *bool `locationName:"useLongIds" type:"boolean"`
	// contains filtered or unexported fields
}

Describes the ID format for a resource.

func (IdFormat) GoString added in v1.0.1 

func (s IdFormat) GoString() string

GoString returns the string representation

func (IdFormat) String added in v1.0.1 

func (s IdFormat) String() string

String returns the string representation

type Image 

type Image struct {

	// The architecture of the image.
	Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"`

	// Any block device mapping entries.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// The date and time the image was created.
	CreationDate *string `locationName:"creationDate" type:"string"`

	// The description of the AMI that was provided during image creation.
	Description *string `locationName:"description" type:"string"`

	// Specifies whether enhanced networking with ENA is enabled.
	EnaSupport *bool `locationName:"enaSupport" type:"boolean"`

	// The hypervisor type of the image.
	Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"`

	// The ID of the AMI.
	ImageId *string `locationName:"imageId" type:"string"`

	// The location of the AMI.
	ImageLocation *string `locationName:"imageLocation" type:"string"`

	// The AWS account alias (for example, amazon, self) or the AWS account ID of
	// the AMI owner.
	ImageOwnerAlias *string `locationName:"imageOwnerAlias" type:"string"`

	// The type of image.
	ImageType *string `locationName:"imageType" type:"string" enum:"ImageTypeValues"`

	// The kernel associated with the image, if any. Only applicable for machine
	// images.
	KernelId *string `locationName:"kernelId" type:"string"`

	// The name of the AMI that was provided during image creation.
	Name *string `locationName:"name" type:"string"`

	// The AWS account ID of the image owner.
	OwnerId *string `locationName:"imageOwnerId" type:"string"`

	// The value is Windows for Windows AMIs; otherwise blank.
	Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"`

	// Any product codes associated with the AMI.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// Indicates whether the image has public launch permissions. The value is true
	// if this image has public launch permissions or false if it has only implicit
	// and explicit launch permissions.
	Public *bool `locationName:"isPublic" type:"boolean"`

	// The RAM disk associated with the image, if any. Only applicable for machine
	// images.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	// The device name of the root device (for example, /dev/sda1 or /dev/xvda).
	RootDeviceName *string `locationName:"rootDeviceName" type:"string"`

	// The type of root device used by the AMI. The AMI can use an EBS volume or
	// an instance store volume.
	RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"`

	// Specifies whether enhanced networking with the Intel 82599 Virtual Function
	// interface is enabled.
	SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"`

	// The current state of the AMI. If the state is available, the image is successfully
	// registered and can be used to launch an instance.
	State *string `locationName:"imageState" type:"string" enum:"ImageState"`

	// The reason for the state change.
	StateReason *StateReason `locationName:"stateReason" type:"structure"`

	// Any tags assigned to the image.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The type of virtualization of the AMI.
	VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"`
	// contains filtered or unexported fields
}

Describes an image.

func (Image) GoString added in v0.6.5 

func (s Image) GoString() string

GoString returns the string representation

func (Image) String added in v0.6.5 

func (s Image) String() string

String returns the string representation

type ImageDiskContainer 

type ImageDiskContainer struct {

	// The description of the disk image.
	Description *string `type:"string"`

	// The block device mapping for the disk.
	DeviceName *string `type:"string"`

	// The format of the disk image being imported.
	//
	// Valid values: RAW | VHD | VMDK | OVA
	Format *string `type:"string"`

	// The ID of the EBS snapshot to be used for importing the snapshot.
	SnapshotId *string `type:"string"`

	// The URL to the Amazon S3-based disk image being imported. The URL can either
	// be a https URL (https://..) or an Amazon S3 URL (s3://..)
	Url *string `type:"string"`

	// The S3 bucket for the disk image.
	UserBucket *UserBucket `type:"structure"`
	// contains filtered or unexported fields
}

Describes the disk container object for an import image task.

func (ImageDiskContainer) GoString added in v0.6.5 

func (s ImageDiskContainer) GoString() string

GoString returns the string representation

func (ImageDiskContainer) String added in v0.6.5 

func (s ImageDiskContainer) String() string

String returns the string representation

type ImportImageInput 

type ImportImageInput struct {

	// The architecture of the virtual machine.
	//
	// Valid values: i386 | x86_64
	Architecture *string `type:"string"`

	// The client-specific data.
	ClientData *ClientData `type:"structure"`

	// The token to enable idempotency for VM import requests.
	ClientToken *string `type:"string"`

	// A description string for the import image task.
	Description *string `type:"string"`

	// Information about the disk containers.
	DiskContainers []*ImageDiskContainer `locationName:"DiskContainer" locationNameList:"item" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The target hypervisor platform.
	//
	// Valid values: xen
	Hypervisor *string `type:"string"`

	// The license type to be used for the Amazon Machine Image (AMI) after importing.
	//
	//  Note: You may only use BYOL if you have existing licenses with rights to
	// use these licenses in a third party cloud like AWS. For more information,
	// see Prerequisites (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html#prerequisites-image)
	// in the VM Import/Export User Guide.
	//
	// Valid values: AWS | BYOL
	LicenseType *string `type:"string"`

	// The operating system of the virtual machine.
	//
	// Valid values: Windows | Linux
	Platform *string `type:"string"`

	// The name of the role to use when not using the default role, 'vmimport'.
	RoleName *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ImportImage.

func (ImportImageInput) GoString added in v0.6.5 

func (s ImportImageInput) GoString() string

GoString returns the string representation

func (ImportImageInput) String added in v0.6.5 

func (s ImportImageInput) String() string

String returns the string representation

type ImportImageOutput 

type ImportImageOutput struct {

	// The architecture of the virtual machine.
	Architecture *string `locationName:"architecture" type:"string"`

	// A description of the import task.
	Description *string `locationName:"description" type:"string"`

	// The target hypervisor of the import task.
	Hypervisor *string `locationName:"hypervisor" type:"string"`

	// The ID of the Amazon Machine Image (AMI) created by the import task.
	ImageId *string `locationName:"imageId" type:"string"`

	// The task ID of the import image task.
	ImportTaskId *string `locationName:"importTaskId" type:"string"`

	// The license type of the virtual machine.
	LicenseType *string `locationName:"licenseType" type:"string"`

	// The operating system of the virtual machine.
	Platform *string `locationName:"platform" type:"string"`

	// The progress of the task.
	Progress *string `locationName:"progress" type:"string"`

	// Information about the snapshots.
	SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"`

	// A brief status of the task.
	Status *string `locationName:"status" type:"string"`

	// A detailed status message of the import task.
	StatusMessage *string `locationName:"statusMessage" type:"string"`
	// contains filtered or unexported fields
}

Contains the output for ImportImage.

func (ImportImageOutput) GoString added in v0.6.5 

func (s ImportImageOutput) GoString() string

GoString returns the string representation

func (ImportImageOutput) String added in v0.6.5 

func (s ImportImageOutput) String() string

String returns the string representation

type ImportImageTask 

type ImportImageTask struct {

	// The architecture of the virtual machine.
	//
	// Valid values: i386 | x86_64
	Architecture *string `locationName:"architecture" type:"string"`

	// A description of the import task.
	Description *string `locationName:"description" type:"string"`

	// The target hypervisor for the import task.
	//
	// Valid values: xen
	Hypervisor *string `locationName:"hypervisor" type:"string"`

	// The ID of the Amazon Machine Image (AMI) of the imported virtual machine.
	ImageId *string `locationName:"imageId" type:"string"`

	// The ID of the import image task.
	ImportTaskId *string `locationName:"importTaskId" type:"string"`

	// The license type of the virtual machine.
	LicenseType *string `locationName:"licenseType" type:"string"`

	// The description string for the import image task.
	Platform *string `locationName:"platform" type:"string"`

	// The percentage of progress of the import image task.
	Progress *string `locationName:"progress" type:"string"`

	// Information about the snapshots.
	SnapshotDetails []*SnapshotDetail `locationName:"snapshotDetailSet" locationNameList:"item" type:"list"`

	// A brief status for the import image task.
	Status *string `locationName:"status" type:"string"`

	// A descriptive status message for the import image task.
	StatusMessage *string `locationName:"statusMessage" type:"string"`
	// contains filtered or unexported fields
}

Describes an import image task.

func (ImportImageTask) GoString added in v0.6.5 

func (s ImportImageTask) GoString() string

GoString returns the string representation

func (ImportImageTask) String added in v0.6.5 

func (s ImportImageTask) String() string

String returns the string representation

type ImportInstanceInput 

type ImportInstanceInput struct {

	// A description for the instance being imported.
	Description *string `locationName:"description" type:"string"`

	// The disk image.
	DiskImages []*DiskImage `locationName:"diskImage" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The launch specification.
	LaunchSpecification *ImportInstanceLaunchSpecification `locationName:"launchSpecification" type:"structure"`

	// The instance operating system.
	Platform *string `locationName:"platform" type:"string" required:"true" enum:"PlatformValues"`
	// contains filtered or unexported fields
}

Contains the parameters for ImportInstance.

func (ImportInstanceInput) GoString added in v0.6.5 

func (s ImportInstanceInput) GoString() string

GoString returns the string representation

func (ImportInstanceInput) String added in v0.6.5 

func (s ImportInstanceInput) String() string

String returns the string representation

func (*ImportInstanceInput) Validate added in v1.1.21 

func (s *ImportInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ImportInstanceLaunchSpecification 

type ImportInstanceLaunchSpecification struct {

	// Reserved.
	AdditionalInfo *string `locationName:"additionalInfo" type:"string"`

	// The architecture of the instance.
	Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"`

	// One or more security group IDs.
	GroupIds []*string `locationName:"GroupId" locationNameList:"SecurityGroupId" type:"list"`

	// One or more security group names.
	GroupNames []*string `locationName:"GroupName" locationNameList:"SecurityGroup" type:"list"`

	// Indicates whether an instance stops or terminates when you initiate shutdown
	// from the instance (using the operating system command for system shutdown).
	InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"`

	// The instance type. For more information about the instance types that you
	// can import, see Instance Types (http://docs.aws.amazon.com/vm-import/latest/userguide/vmimport-image-import.html#vmimport-instance-types)
	// in the VM Import/Export User Guide.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// Indicates whether monitoring is enabled.
	Monitoring *bool `locationName:"monitoring" type:"boolean"`

	// The placement information for the instance.
	Placement *Placement `locationName:"placement" type:"structure"`

	// [EC2-VPC] An available IP address from the IP address range of the subnet.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// [EC2-VPC] The ID of the subnet in which to launch the instance.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The user data to make available to the instance. If you are using an AWS
	// SDK or command line tool, Base64-encoding is performed for you, and you can
	// load the text from a file. Otherwise, you must provide Base64-encoded text.
	UserData *UserData `locationName:"userData" type:"structure"`
	// contains filtered or unexported fields
}

Describes the launch specification for VM import.

func (ImportInstanceLaunchSpecification) GoString added in v0.6.5 

func (s ImportInstanceLaunchSpecification) GoString() string

GoString returns the string representation

func (ImportInstanceLaunchSpecification) String added in v0.6.5 

func (s ImportInstanceLaunchSpecification) String() string

String returns the string representation

type ImportInstanceOutput 

type ImportInstanceOutput struct {

	// Information about the conversion task.
	ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output for ImportInstance.

func (ImportInstanceOutput) GoString added in v0.6.5 

func (s ImportInstanceOutput) GoString() string

GoString returns the string representation

func (ImportInstanceOutput) String added in v0.6.5 

func (s ImportInstanceOutput) String() string

String returns the string representation

type ImportInstanceTaskDetails 

type ImportInstanceTaskDetails struct {

	// A description of the task.
	Description *string `locationName:"description" type:"string"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The instance operating system.
	Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"`

	// One or more volumes.
	Volumes []*ImportInstanceVolumeDetailItem `locationName:"volumes" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Describes an import instance task.

func (ImportInstanceTaskDetails) GoString added in v0.6.5 

func (s ImportInstanceTaskDetails) GoString() string

GoString returns the string representation

func (ImportInstanceTaskDetails) String added in v0.6.5 

func (s ImportInstanceTaskDetails) String() string

String returns the string representation

type ImportInstanceVolumeDetailItem 

type ImportInstanceVolumeDetailItem struct {

	// The Availability Zone where the resulting instance will reside.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"`

	// The number of bytes converted so far.
	BytesConverted *int64 `locationName:"bytesConverted" type:"long" required:"true"`

	// A description of the task.
	Description *string `locationName:"description" type:"string"`

	// The image.
	Image *DiskImageDescription `locationName:"image" type:"structure" required:"true"`

	// The status of the import of this particular disk image.
	Status *string `locationName:"status" type:"string" required:"true"`

	// The status information or errors related to the disk image.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// The volume.
	Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Describes an import volume task.

func (ImportInstanceVolumeDetailItem) GoString added in v0.6.5 

func (s ImportInstanceVolumeDetailItem) GoString() string

GoString returns the string representation

func (ImportInstanceVolumeDetailItem) String added in v0.6.5 

func (s ImportInstanceVolumeDetailItem) String() string

String returns the string representation

type ImportKeyPairInput 

type ImportKeyPairInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// A unique name for the key pair.
	KeyName *string `locationName:"keyName" type:"string" required:"true"`

	// The public key. For API calls, the text must be base64-encoded. For command
	// line tools, base64 encoding is performed for you.
	//
	// PublicKeyMaterial is automatically base64 encoded/decoded by the SDK.
	PublicKeyMaterial []byte `locationName:"publicKeyMaterial" type:"blob" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ImportKeyPair.

func (ImportKeyPairInput) GoString added in v0.6.5 

func (s ImportKeyPairInput) GoString() string

GoString returns the string representation

func (ImportKeyPairInput) String added in v0.6.5 

func (s ImportKeyPairInput) String() string

String returns the string representation

func (*ImportKeyPairInput) Validate added in v1.1.21 

func (s *ImportKeyPairInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ImportKeyPairOutput 

type ImportKeyPairOutput struct {

	// The MD5 public key fingerprint as specified in section 4 of RFC 4716.
	KeyFingerprint *string `locationName:"keyFingerprint" type:"string"`

	// The key pair name you provided.
	KeyName *string `locationName:"keyName" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of ImportKeyPair.

func (ImportKeyPairOutput) GoString added in v0.6.5 

func (s ImportKeyPairOutput) GoString() string

GoString returns the string representation

func (ImportKeyPairOutput) String added in v0.6.5 

func (s ImportKeyPairOutput) String() string

String returns the string representation

type ImportSnapshotInput 

type ImportSnapshotInput struct {

	// The client-specific data.
	ClientData *ClientData `type:"structure"`

	// Token to enable idempotency for VM import requests.
	ClientToken *string `type:"string"`

	// The description string for the import snapshot task.
	Description *string `type:"string"`

	// Information about the disk container.
	DiskContainer *SnapshotDiskContainer `type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The name of the role to use when not using the default role, 'vmimport'.
	RoleName *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ImportSnapshot.

func (ImportSnapshotInput) GoString added in v0.6.5 

func (s ImportSnapshotInput) GoString() string

GoString returns the string representation

func (ImportSnapshotInput) String added in v0.6.5 

func (s ImportSnapshotInput) String() string

String returns the string representation

type ImportSnapshotOutput 

type ImportSnapshotOutput struct {

	// A description of the import snapshot task.
	Description *string `locationName:"description" type:"string"`

	// The ID of the import snapshot task.
	ImportTaskId *string `locationName:"importTaskId" type:"string"`

	// Information about the import snapshot task.
	SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output for ImportSnapshot.

func (ImportSnapshotOutput) GoString added in v0.6.5 

func (s ImportSnapshotOutput) GoString() string

GoString returns the string representation

func (ImportSnapshotOutput) String added in v0.6.5 

func (s ImportSnapshotOutput) String() string

String returns the string representation

type ImportSnapshotTask 

type ImportSnapshotTask struct {

	// A description of the import snapshot task.
	Description *string `locationName:"description" type:"string"`

	// The ID of the import snapshot task.
	ImportTaskId *string `locationName:"importTaskId" type:"string"`

	// Describes an import snapshot task.
	SnapshotTaskDetail *SnapshotTaskDetail `locationName:"snapshotTaskDetail" type:"structure"`
	// contains filtered or unexported fields
}

Describes an import snapshot task.

func (ImportSnapshotTask) GoString added in v0.6.5 

func (s ImportSnapshotTask) GoString() string

GoString returns the string representation

func (ImportSnapshotTask) String added in v0.6.5 

func (s ImportSnapshotTask) String() string

String returns the string representation

type ImportVolumeInput 

type ImportVolumeInput struct {

	// The Availability Zone for the resulting EBS volume.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"`

	// A description of the volume.
	Description *string `locationName:"description" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The disk image.
	Image *DiskImageDetail `locationName:"image" type:"structure" required:"true"`

	// The volume size.
	Volume *VolumeDetail `locationName:"volume" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ImportVolume.

func (ImportVolumeInput) GoString added in v0.6.5 

func (s ImportVolumeInput) GoString() string

GoString returns the string representation

func (ImportVolumeInput) String added in v0.6.5 

func (s ImportVolumeInput) String() string

String returns the string representation

func (*ImportVolumeInput) Validate added in v1.1.21 

func (s *ImportVolumeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ImportVolumeOutput 

type ImportVolumeOutput struct {

	// Information about the conversion task.
	ConversionTask *ConversionTask `locationName:"conversionTask" type:"structure"`
	// contains filtered or unexported fields
}

Contains the output for ImportVolume.

func (ImportVolumeOutput) GoString added in v0.6.5 

func (s ImportVolumeOutput) GoString() string

GoString returns the string representation

func (ImportVolumeOutput) String added in v0.6.5 

func (s ImportVolumeOutput) String() string

String returns the string representation

type ImportVolumeTaskDetails 

type ImportVolumeTaskDetails struct {

	// The Availability Zone where the resulting volume will reside.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string" required:"true"`

	// The number of bytes converted so far.
	BytesConverted *int64 `locationName:"bytesConverted" type:"long" required:"true"`

	// The description you provided when starting the import volume task.
	Description *string `locationName:"description" type:"string"`

	// The image.
	Image *DiskImageDescription `locationName:"image" type:"structure" required:"true"`

	// The volume.
	Volume *DiskImageVolumeDescription `locationName:"volume" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Describes an import volume task.

func (ImportVolumeTaskDetails) GoString added in v0.6.5 

func (s ImportVolumeTaskDetails) GoString() string

GoString returns the string representation

func (ImportVolumeTaskDetails) String added in v0.6.5 

func (s ImportVolumeTaskDetails) String() string

String returns the string representation

type Instance 

type Instance struct {

	// The AMI launch index, which can be used to find this instance in the launch
	// group.
	AmiLaunchIndex *int64 `locationName:"amiLaunchIndex" type:"integer"`

	// The architecture of the image.
	Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"`

	// Any block device mapping entries for the instance.
	BlockDeviceMappings []*InstanceBlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// The idempotency token you provided when you launched the instance, if applicable.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Indicates whether the instance is optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS
	// Optimized instance.
	EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"`

	// Specifies whether enhanced networking with ENA is enabled.
	EnaSupport *bool `locationName:"enaSupport" type:"boolean"`

	// The hypervisor type of the instance.
	Hypervisor *string `locationName:"hypervisor" type:"string" enum:"HypervisorType"`

	// The IAM instance profile associated with the instance, if applicable.
	IamInstanceProfile *IamInstanceProfile `locationName:"iamInstanceProfile" type:"structure"`

	// The ID of the AMI used to launch the instance.
	ImageId *string `locationName:"imageId" type:"string"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// Indicates whether this is a Spot instance or a Scheduled Instance.
	InstanceLifecycle *string `locationName:"instanceLifecycle" type:"string" enum:"InstanceLifecycleType"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The kernel associated with this instance, if applicable.
	KernelId *string `locationName:"kernelId" type:"string"`

	// The name of the key pair, if this instance was launched with an associated
	// key pair.
	KeyName *string `locationName:"keyName" type:"string"`

	// The time the instance was launched.
	LaunchTime *time.Time `locationName:"launchTime" type:"timestamp" timestampFormat:"iso8601"`

	// The monitoring information for the instance.
	Monitoring *Monitoring `locationName:"monitoring" type:"structure"`

	// [EC2-VPC] One or more network interfaces for the instance.
	NetworkInterfaces []*InstanceNetworkInterface `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"`

	// The location where the instance launched, if applicable.
	Placement *Placement `locationName:"placement" type:"structure"`

	// The value is Windows for Windows instances; otherwise blank.
	Platform *string `locationName:"platform" type:"string" enum:"PlatformValues"`

	// The private DNS name assigned to the instance. This DNS name can only be
	// used inside the Amazon EC2 network. This name is not available until the
	// instance enters the running state. For EC2-VPC, this name is only available
	// if you've enabled DNS hostnames for your VPC.
	PrivateDnsName *string `locationName:"privateDnsName" type:"string"`

	// The private IP address assigned to the instance.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The product codes attached to this instance, if applicable.
	ProductCodes []*ProductCode `locationName:"productCodes" locationNameList:"item" type:"list"`

	// The public DNS name assigned to the instance. This name is not available
	// until the instance enters the running state. For EC2-VPC, this name is only
	// available if you've enabled DNS hostnames for your VPC.
	PublicDnsName *string `locationName:"dnsName" type:"string"`

	// The public IP address assigned to the instance, if applicable.
	PublicIpAddress *string `locationName:"ipAddress" type:"string"`

	// The RAM disk associated with this instance, if applicable.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	// The root device name (for example, /dev/sda1 or /dev/xvda).
	RootDeviceName *string `locationName:"rootDeviceName" type:"string"`

	// The root device type used by the AMI. The AMI can use an EBS volume or an
	// instance store volume.
	RootDeviceType *string `locationName:"rootDeviceType" type:"string" enum:"DeviceType"`

	// One or more security groups for the instance.
	SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// Specifies whether to enable an instance launched in a VPC to perform NAT.
	// This controls whether source/destination checking is enabled on the instance.
	// A value of true means checking is enabled, and false means checking is disabled.
	// The value must be false for the instance to perform NAT. For more information,
	// see NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html)
	// in the Amazon Virtual Private Cloud User Guide.
	SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"`

	// If the request is a Spot instance request, the ID of the request.
	SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"`

	// Specifies whether enhanced networking with the Intel 82599 Virtual Function
	// interface is enabled.
	SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"`

	// The current state of the instance.
	State *InstanceState `locationName:"instanceState" type:"structure"`

	// The reason for the most recent state transition.
	StateReason *StateReason `locationName:"stateReason" type:"structure"`

	// The reason for the most recent state transition. This might be an empty string.
	StateTransitionReason *string `locationName:"reason" type:"string"`

	// [EC2-VPC] The ID of the subnet in which the instance is running.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// Any tags assigned to the instance.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The virtualization type of the instance.
	VirtualizationType *string `locationName:"virtualizationType" type:"string" enum:"VirtualizationType"`

	// [EC2-VPC] The ID of the VPC in which the instance is running.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes an instance.

func (Instance) GoString added in v0.6.5 

func (s Instance) GoString() string

GoString returns the string representation

func (Instance) String added in v0.6.5 

func (s Instance) String() string

String returns the string representation

type InstanceBlockDeviceMapping 

type InstanceBlockDeviceMapping struct {

	// The device name exposed to the instance (for example, /dev/sdh or xvdh).
	DeviceName *string `locationName:"deviceName" type:"string"`

	// Parameters used to automatically set up EBS volumes when the instance is
	// launched.
	Ebs *EbsInstanceBlockDevice `locationName:"ebs" type:"structure"`
	// contains filtered or unexported fields
}

Describes a block device mapping.

func (InstanceBlockDeviceMapping) GoString added in v0.6.5 

func (s InstanceBlockDeviceMapping) GoString() string

GoString returns the string representation

func (InstanceBlockDeviceMapping) String added in v0.6.5 

func (s InstanceBlockDeviceMapping) String() string

String returns the string representation

type InstanceBlockDeviceMappingSpecification 

type InstanceBlockDeviceMappingSpecification struct {

	// The device name exposed to the instance (for example, /dev/sdh or xvdh).
	DeviceName *string `locationName:"deviceName" type:"string"`

	// Parameters used to automatically set up EBS volumes when the instance is
	// launched.
	Ebs *EbsInstanceBlockDeviceSpecification `locationName:"ebs" type:"structure"`

	// suppress the specified device included in the block device mapping.
	NoDevice *string `locationName:"noDevice" type:"string"`

	// The virtual device name.
	VirtualName *string `locationName:"virtualName" type:"string"`
	// contains filtered or unexported fields
}

Describes a block device mapping entry.

func (InstanceBlockDeviceMappingSpecification) GoString added in v0.6.5 

func (s InstanceBlockDeviceMappingSpecification) GoString() string

GoString returns the string representation

func (InstanceBlockDeviceMappingSpecification) String added in v0.6.5 

func (s InstanceBlockDeviceMappingSpecification) String() string

String returns the string representation

type InstanceCapacity added in v1.0.1 

type InstanceCapacity struct {

	// The number of instances that can still be launched onto the Dedicated Host.
	AvailableCapacity *int64 `locationName:"availableCapacity" type:"integer"`

	// The instance type size supported by the Dedicated Host.
	InstanceType *string `locationName:"instanceType" type:"string"`

	// The total number of instances that can be launched onto the Dedicated Host.
	TotalCapacity *int64 `locationName:"totalCapacity" type:"integer"`
	// contains filtered or unexported fields
}

Information about the instance type that the Dedicated Host supports.

func (InstanceCapacity) GoString added in v1.0.1 

func (s InstanceCapacity) GoString() string

GoString returns the string representation

func (InstanceCapacity) String added in v1.0.1 

func (s InstanceCapacity) String() string

String returns the string representation

type InstanceCount 

type InstanceCount struct {

	// The number of listed Reserved Instances in the state specified by the state.
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The states of the listed Reserved Instances.
	State *string `locationName:"state" type:"string" enum:"ListingState"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance listing state.

func (InstanceCount) GoString added in v0.6.5 

func (s InstanceCount) GoString() string

GoString returns the string representation

func (InstanceCount) String added in v0.6.5 

func (s InstanceCount) String() string

String returns the string representation

type InstanceExportDetails 

type InstanceExportDetails struct {

	// The ID of the resource being exported.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The target virtualization environment.
	TargetEnvironment *string `locationName:"targetEnvironment" type:"string" enum:"ExportEnvironment"`
	// contains filtered or unexported fields
}

Describes an instance to export.

func (InstanceExportDetails) GoString added in v0.6.5 

func (s InstanceExportDetails) GoString() string

GoString returns the string representation

func (InstanceExportDetails) String added in v0.6.5 

func (s InstanceExportDetails) String() string

String returns the string representation

type InstanceMonitoring 

type InstanceMonitoring struct {

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The monitoring information.
	Monitoring *Monitoring `locationName:"monitoring" type:"structure"`
	// contains filtered or unexported fields
}

Describes the monitoring information of the instance.

func (InstanceMonitoring) GoString added in v0.6.5 

func (s InstanceMonitoring) GoString() string

GoString returns the string representation

func (InstanceMonitoring) String added in v0.6.5 

func (s InstanceMonitoring) String() string

String returns the string representation

type InstanceNetworkInterface 

type InstanceNetworkInterface struct {

	// The association information for an Elastic IP associated with the network
	// interface.
	Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"`

	// The network interface attachment.
	Attachment *InstanceNetworkInterfaceAttachment `locationName:"attachment" type:"structure"`

	// The description.
	Description *string `locationName:"description" type:"string"`

	// One or more security groups.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The MAC address.
	MacAddress *string `locationName:"macAddress" type:"string"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The ID of the AWS account that created the network interface.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The private DNS name.
	PrivateDnsName *string `locationName:"privateDnsName" type:"string"`

	// The IP address of the network interface within the subnet.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The private IP addresses associated with the network interface.
	PrivateIpAddresses []*InstancePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"`

	// Indicates whether to validate network traffic to or from this network interface.
	SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"`

	// The status of the network interface.
	Status *string `locationName:"status" type:"string" enum:"NetworkInterfaceStatus"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a network interface.

func (InstanceNetworkInterface) GoString added in v0.6.5 

func (s InstanceNetworkInterface) GoString() string

GoString returns the string representation

func (InstanceNetworkInterface) String added in v0.6.5 

func (s InstanceNetworkInterface) String() string

String returns the string representation

type InstanceNetworkInterfaceAssociation 

type InstanceNetworkInterfaceAssociation struct {

	// The ID of the owner of the Elastic IP address.
	IpOwnerId *string `locationName:"ipOwnerId" type:"string"`

	// The public DNS name.
	PublicDnsName *string `locationName:"publicDnsName" type:"string"`

	// The public IP address or Elastic IP address bound to the network interface.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Describes association information for an Elastic IP address.

func (InstanceNetworkInterfaceAssociation) GoString added in v0.6.5 

func (s InstanceNetworkInterfaceAssociation) GoString() string

GoString returns the string representation

func (InstanceNetworkInterfaceAssociation) String added in v0.6.5 

func (s InstanceNetworkInterfaceAssociation) String() string

String returns the string representation

type InstanceNetworkInterfaceAttachment 

type InstanceNetworkInterfaceAttachment struct {

	// The time stamp when the attachment initiated.
	AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"`

	// The ID of the network interface attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string"`

	// Indicates whether the network interface is deleted when the instance is terminated.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The index of the device on the instance for the network interface attachment.
	DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"`

	// The attachment state.
	Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"`
	// contains filtered or unexported fields
}

Describes a network interface attachment.

func (InstanceNetworkInterfaceAttachment) GoString added in v0.6.5 

func (s InstanceNetworkInterfaceAttachment) GoString() string

GoString returns the string representation

func (InstanceNetworkInterfaceAttachment) String added in v0.6.5 

func (s InstanceNetworkInterfaceAttachment) String() string

String returns the string representation

type InstanceNetworkInterfaceSpecification 

type InstanceNetworkInterfaceSpecification struct {

	// Indicates whether to assign a public IP address to an instance you launch
	// in a VPC. The public IP address can only be assigned to a network interface
	// for eth0, and can only be assigned to a new network interface, not an existing
	// one. You cannot specify more than one network interface in the request. If
	// launching into a default subnet, the default value is true.
	AssociatePublicIpAddress *bool `locationName:"associatePublicIpAddress" type:"boolean"`

	// If set to true, the interface is deleted when the instance is terminated.
	// You can specify true only if creating a new network interface when launching
	// an instance.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The description of the network interface. Applies only if creating a network
	// interface when launching an instance.
	Description *string `locationName:"description" type:"string"`

	// The index of the device on the instance for the network interface attachment.
	// If you are specifying a network interface in a RunInstances request, you
	// must provide the device index.
	DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"`

	// The IDs of the security groups for the network interface. Applies only if
	// creating a network interface when launching an instance.
	Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The private IP address of the network interface. Applies only if creating
	// a network interface when launching an instance. You cannot specify this option
	// if you're launching more than one instance in a RunInstances request.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// One or more private IP addresses to assign to the network interface. Only
	// one private IP address can be designated as primary. You cannot specify this
	// option if you're launching more than one instance in a RunInstances request.
	PrivateIpAddresses []*PrivateIpAddressSpecification `locationName:"privateIpAddressesSet" queryName:"PrivateIpAddresses" locationNameList:"item" type:"list"`

	// The number of secondary private IP addresses. You can't specify this option
	// and specify more than one private IP address using the private IP addresses
	// option. You cannot specify this option if you're launching more than one
	// instance in a RunInstances request.
	SecondaryPrivateIpAddressCount *int64 `locationName:"secondaryPrivateIpAddressCount" type:"integer"`

	// The ID of the subnet associated with the network string. Applies only if
	// creating a network interface when launching an instance.
	SubnetId *string `locationName:"subnetId" type:"string"`
	// contains filtered or unexported fields
}

Describes a network interface.

func (InstanceNetworkInterfaceSpecification) GoString added in v0.6.5 

func (s InstanceNetworkInterfaceSpecification) GoString() string

GoString returns the string representation

func (InstanceNetworkInterfaceSpecification) String added in v0.6.5 

func (s InstanceNetworkInterfaceSpecification) String() string

String returns the string representation

func (*InstanceNetworkInterfaceSpecification) Validate added in v1.1.21 

func (s *InstanceNetworkInterfaceSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InstancePrivateIpAddress added in v0.9.5 

type InstancePrivateIpAddress struct {

	// The association information for an Elastic IP address for the network interface.
	Association *InstanceNetworkInterfaceAssociation `locationName:"association" type:"structure"`

	// Indicates whether this IP address is the primary private IP address of the
	// network interface.
	Primary *bool `locationName:"primary" type:"boolean"`

	// The private DNS name.
	PrivateDnsName *string `locationName:"privateDnsName" type:"string"`

	// The private IP address of the network interface.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`
	// contains filtered or unexported fields
}

Describes a private IP address.

func (InstancePrivateIpAddress) GoString added in v0.9.5 

func (s InstancePrivateIpAddress) GoString() string

GoString returns the string representation

func (InstancePrivateIpAddress) String added in v0.9.5 

func (s InstancePrivateIpAddress) String() string

String returns the string representation

type InstanceState 

type InstanceState struct {

	// The low byte represents the state. The high byte is an opaque internal value
	// and should be ignored.
	//
	//    0 : pending
	//
	//    16 : running
	//
	//    32 : shutting-down
	//
	//    48 : terminated
	//
	//    64 : stopping
	//
	//    80 : stopped
	Code *int64 `locationName:"code" type:"integer"`

	// The current state of the instance.
	Name *string `locationName:"name" type:"string" enum:"InstanceStateName"`
	// contains filtered or unexported fields
}

Describes the current state of the instance.

func (InstanceState) GoString added in v0.6.5 

func (s InstanceState) GoString() string

GoString returns the string representation

func (InstanceState) String added in v0.6.5 

func (s InstanceState) String() string

String returns the string representation

type InstanceStateChange 

type InstanceStateChange struct {

	// The current state of the instance.
	CurrentState *InstanceState `locationName:"currentState" type:"structure"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The previous state of the instance.
	PreviousState *InstanceState `locationName:"previousState" type:"structure"`
	// contains filtered or unexported fields
}

Describes an instance state change.

func (InstanceStateChange) GoString added in v0.6.5 

func (s InstanceStateChange) GoString() string

GoString returns the string representation

func (InstanceStateChange) String added in v0.6.5 

func (s InstanceStateChange) String() string

String returns the string representation

type InstanceStatus 

type InstanceStatus struct {

	// The Availability Zone of the instance.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// Any scheduled events associated with the instance.
	Events []*InstanceStatusEvent `locationName:"eventsSet" locationNameList:"item" type:"list"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The intended state of the instance. DescribeInstanceStatus requires that
	// an instance be in the running state.
	InstanceState *InstanceState `locationName:"instanceState" type:"structure"`

	// Reports impaired functionality that stems from issues internal to the instance,
	// such as impaired reachability.
	InstanceStatus *InstanceStatusSummary `locationName:"instanceStatus" type:"structure"`

	// Reports impaired functionality that stems from issues related to the systems
	// that support an instance, such as hardware failures and network connectivity
	// problems.
	SystemStatus *InstanceStatusSummary `locationName:"systemStatus" type:"structure"`
	// contains filtered or unexported fields
}

Describes the status of an instance.

func (InstanceStatus) GoString added in v0.6.5 

func (s InstanceStatus) GoString() string

GoString returns the string representation

func (InstanceStatus) String added in v0.6.5 

func (s InstanceStatus) String() string

String returns the string representation

type InstanceStatusDetails 

type InstanceStatusDetails struct {

	// The time when a status check failed. For an instance that was launched and
	// impaired, this is the time when the instance was launched.
	ImpairedSince *time.Time `locationName:"impairedSince" type:"timestamp" timestampFormat:"iso8601"`

	// The type of instance status.
	Name *string `locationName:"name" type:"string" enum:"StatusName"`

	// The status.
	Status *string `locationName:"status" type:"string" enum:"StatusType"`
	// contains filtered or unexported fields
}

Describes the instance status.

func (InstanceStatusDetails) GoString added in v0.6.5 

func (s InstanceStatusDetails) GoString() string

GoString returns the string representation

func (InstanceStatusDetails) String added in v0.6.5 

func (s InstanceStatusDetails) String() string

String returns the string representation

type InstanceStatusEvent 

type InstanceStatusEvent struct {

	// The event code.
	Code *string `locationName:"code" type:"string" enum:"EventCode"`

	// A description of the event.
	//
	// After a scheduled event is completed, it can still be described for up to
	// a week. If the event has been completed, this description starts with the
	// following text: [Completed].
	Description *string `locationName:"description" type:"string"`

	// The latest scheduled end time for the event.
	NotAfter *time.Time `locationName:"notAfter" type:"timestamp" timestampFormat:"iso8601"`

	// The earliest scheduled start time for the event.
	NotBefore *time.Time `locationName:"notBefore" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a scheduled event for an instance.

func (InstanceStatusEvent) GoString added in v0.6.5 

func (s InstanceStatusEvent) GoString() string

GoString returns the string representation

func (InstanceStatusEvent) String added in v0.6.5 

func (s InstanceStatusEvent) String() string

String returns the string representation

type InstanceStatusSummary 

type InstanceStatusSummary struct {

	// The system instance health or application instance health.
	Details []*InstanceStatusDetails `locationName:"details" locationNameList:"item" type:"list"`

	// The status.
	Status *string `locationName:"status" type:"string" enum:"SummaryStatus"`
	// contains filtered or unexported fields
}

Describes the status of an instance.

func (InstanceStatusSummary) GoString added in v0.6.5 

func (s InstanceStatusSummary) GoString() string

GoString returns the string representation

func (InstanceStatusSummary) String added in v0.6.5 

func (s InstanceStatusSummary) String() string

String returns the string representation

type InternetGateway 

type InternetGateway struct {

	// Any VPCs attached to the Internet gateway.
	Attachments []*InternetGatewayAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"`

	// The ID of the Internet gateway.
	InternetGatewayId *string `locationName:"internetGatewayId" type:"string"`

	// Any tags assigned to the Internet gateway.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes an Internet gateway.

func (InternetGateway) GoString added in v0.6.5 

func (s InternetGateway) GoString() string

GoString returns the string representation

func (InternetGateway) String added in v0.6.5 

func (s InternetGateway) String() string

String returns the string representation

type InternetGatewayAttachment 

type InternetGatewayAttachment struct {

	// The current state of the attachment.
	State *string `locationName:"state" type:"string" enum:"AttachmentStatus"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes the attachment of a VPC to an Internet gateway.

func (InternetGatewayAttachment) GoString added in v0.6.5 

func (s InternetGatewayAttachment) GoString() string

GoString returns the string representation

func (InternetGatewayAttachment) String added in v0.6.5 

func (s InternetGatewayAttachment) String() string

String returns the string representation

type IpPermission added in v0.9.5 

type IpPermission struct {

	// The start of port range for the TCP and UDP protocols, or an ICMP type number.
	// A value of -1 indicates all ICMP types.
	FromPort *int64 `locationName:"fromPort" type:"integer"`

	// The IP protocol name (for tcp, udp, and icmp) or number (see Protocol Numbers
	// (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)).
	//
	// [EC2-VPC only] When you authorize or revoke security group rules, you can
	// use -1 to specify all.
	IpProtocol *string `locationName:"ipProtocol" type:"string"`

	// One or more IP ranges.
	IpRanges []*IpRange `locationName:"ipRanges" locationNameList:"item" type:"list"`

	// (Valid for AuthorizeSecurityGroupEgress, RevokeSecurityGroupEgress and DescribeSecurityGroups
	// only) One or more prefix list IDs for an AWS service. In an AuthorizeSecurityGroupEgress
	// request, this is the AWS service that you want to access through a VPC endpoint
	// from instances associated with the security group.
	PrefixListIds []*PrefixListId `locationName:"prefixListIds" locationNameList:"item" type:"list"`

	// The end of port range for the TCP and UDP protocols, or an ICMP code. A value
	// of -1 indicates all ICMP codes for the specified ICMP type.
	ToPort *int64 `locationName:"toPort" type:"integer"`

	// One or more security group and AWS account ID pairs.
	UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a security group rule.

func (IpPermission) GoString added in v0.9.5 

func (s IpPermission) GoString() string

GoString returns the string representation

func (IpPermission) String added in v0.9.5 

func (s IpPermission) String() string

String returns the string representation

type IpRange added in v0.9.5 

type IpRange struct {

	// The CIDR range. You can either specify a CIDR range or a source security
	// group, not both.
	CidrIp *string `locationName:"cidrIp" type:"string"`
	// contains filtered or unexported fields
}

Describes an IP range.

func (IpRange) GoString added in v0.9.5 

func (s IpRange) GoString() string

GoString returns the string representation

func (IpRange) String added in v0.9.5 

func (s IpRange) String() string

String returns the string representation

type KeyPairInfo 

type KeyPairInfo struct {

	// If you used CreateKeyPair to create the key pair, this is the SHA-1 digest
	// of the DER encoded private key. If you used ImportKeyPair to provide AWS
	// the public key, this is the MD5 public key fingerprint as specified in section
	// 4 of RFC4716.
	KeyFingerprint *string `locationName:"keyFingerprint" type:"string"`

	// The name of the key pair.
	KeyName *string `locationName:"keyName" type:"string"`
	// contains filtered or unexported fields
}

Describes a key pair.

func (KeyPairInfo) GoString added in v0.6.5 

func (s KeyPairInfo) GoString() string

GoString returns the string representation

func (KeyPairInfo) String added in v0.6.5 

func (s KeyPairInfo) String() string

String returns the string representation

type LaunchPermission 

type LaunchPermission struct {

	// The name of the group.
	Group *string `locationName:"group" type:"string" enum:"PermissionGroup"`

	// The AWS account ID.
	UserId *string `locationName:"userId" type:"string"`
	// contains filtered or unexported fields
}

Describes a launch permission.

func (LaunchPermission) GoString added in v0.6.5 

func (s LaunchPermission) GoString() string

GoString returns the string representation

func (LaunchPermission) String added in v0.6.5 

func (s LaunchPermission) String() string

String returns the string representation

type LaunchPermissionModifications 

type LaunchPermissionModifications struct {

	// The AWS account ID to add to the list of launch permissions for the AMI.
	Add []*LaunchPermission `locationNameList:"item" type:"list"`

	// The AWS account ID to remove from the list of launch permissions for the
	// AMI.
	Remove []*LaunchPermission `locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a launch permission modification.

func (LaunchPermissionModifications) GoString added in v0.6.5 

func (s LaunchPermissionModifications) GoString() string

GoString returns the string representation

func (LaunchPermissionModifications) String added in v0.6.5 

func (s LaunchPermissionModifications) String() string

String returns the string representation

type LaunchSpecification 

type LaunchSpecification struct {

	// Deprecated.
	AddressingType *string `locationName:"addressingType" type:"string"`

	// One or more block device mapping entries.
	//
	// Although you can specify encrypted EBS volumes in this block device mapping
	// for your Spot Instances, these volumes are not encrypted.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// Indicates whether the instance is optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS
	// Optimized instance.
	//
	// Default: false
	EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"`

	// The IAM instance profile.
	IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"`

	// The ID of the AMI.
	ImageId *string `locationName:"imageId" type:"string"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The ID of the kernel.
	KernelId *string `locationName:"kernelId" type:"string"`

	// The name of the key pair.
	KeyName *string `locationName:"keyName" type:"string"`

	// Describes the monitoring for the instance.
	Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"`

	// One or more network interfaces.
	NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"`

	// The placement information for the instance.
	Placement *SpotPlacement `locationName:"placement" type:"structure"`

	// The ID of the RAM disk.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	// One or more security groups. When requesting instances in a VPC, you must
	// specify the IDs of the security groups. When requesting instances in EC2-Classic,
	// you can specify the names or the IDs of the security groups.
	SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The ID of the subnet in which to launch the instance.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The user data to make available to the instances. If you are using an AWS
	// SDK or command line tool, Base64-encoding is performed for you, and you can
	// load the text from a file. Otherwise, you must provide Base64-encoded text.
	UserData *string `locationName:"userData" type:"string"`
	// contains filtered or unexported fields
}

Describes the launch specification for an instance.

func (LaunchSpecification) GoString added in v0.6.5 

func (s LaunchSpecification) GoString() string

GoString returns the string representation

func (LaunchSpecification) String added in v0.6.5 

func (s LaunchSpecification) String() string

String returns the string representation

type ModifyHostsInput added in v1.0.1 

type ModifyHostsInput struct {

	// Specify whether to enable or disable auto-placement.
	AutoPlacement *string `locationName:"autoPlacement" type:"string" required:"true" enum:"AutoPlacement"`

	// The host IDs of the Dedicated Hosts you want to modify.
	HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyHosts.

func (ModifyHostsInput) GoString added in v1.0.1 

func (s ModifyHostsInput) GoString() string

GoString returns the string representation

func (ModifyHostsInput) String added in v1.0.1 

func (s ModifyHostsInput) String() string

String returns the string representation

func (*ModifyHostsInput) Validate added in v1.1.21 

func (s *ModifyHostsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyHostsOutput added in v1.0.1 

type ModifyHostsOutput struct {

	// The IDs of the Dedicated Hosts that were successfully modified.
	Successful []*string `locationName:"successful" locationNameList:"item" type:"list"`

	// The IDs of the Dedicated Hosts that could not be modified. Check whether
	// the setting you requested can be used.
	Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyHosts.

func (ModifyHostsOutput) GoString added in v1.0.1 

func (s ModifyHostsOutput) GoString() string

GoString returns the string representation

func (ModifyHostsOutput) String added in v1.0.1 

func (s ModifyHostsOutput) String() string

String returns the string representation

type ModifyIdFormatInput added in v1.0.1 

type ModifyIdFormatInput struct {

	// The type of resource: instance | reservation | snapshot | volume
	Resource *string `type:"string" required:"true"`

	// Indicate whether the resource should use longer IDs (17-character IDs).
	UseLongIds *bool `type:"boolean" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters of ModifyIdFormat.

func (ModifyIdFormatInput) GoString added in v1.0.1 

func (s ModifyIdFormatInput) GoString() string

GoString returns the string representation

func (ModifyIdFormatInput) String added in v1.0.1 

func (s ModifyIdFormatInput) String() string

String returns the string representation

func (*ModifyIdFormatInput) Validate added in v1.1.21 

func (s *ModifyIdFormatInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyIdFormatOutput added in v1.0.1 

type ModifyIdFormatOutput struct {
	// contains filtered or unexported fields
}

func (ModifyIdFormatOutput) GoString added in v1.0.1 

func (s ModifyIdFormatOutput) GoString() string

GoString returns the string representation

func (ModifyIdFormatOutput) String added in v1.0.1 

func (s ModifyIdFormatOutput) String() string

String returns the string representation

type ModifyIdentityIdFormatInput added in v1.2.0 

type ModifyIdentityIdFormatInput struct {

	// The ARN of the principal, which can be an IAM user, IAM role, or the root
	// user. Specify all to modify the ID format for all IAM users, IAM roles, and
	// the root user of the account.
	PrincipalArn *string `locationName:"principalArn" type:"string" required:"true"`

	// The type of resource: instance | reservation | snapshot | volume
	Resource *string `locationName:"resource" type:"string" required:"true"`

	// Indicates whether the resource should use longer IDs (17-character IDs)
	UseLongIds *bool `locationName:"useLongIds" type:"boolean" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters of ModifyIdentityIdFormat.

func (ModifyIdentityIdFormatInput) GoString added in v1.2.0 

func (s ModifyIdentityIdFormatInput) GoString() string

GoString returns the string representation

func (ModifyIdentityIdFormatInput) String added in v1.2.0 

func (s ModifyIdentityIdFormatInput) String() string

String returns the string representation

func (*ModifyIdentityIdFormatInput) Validate added in v1.2.0 

func (s *ModifyIdentityIdFormatInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyIdentityIdFormatOutput added in v1.2.0 

type ModifyIdentityIdFormatOutput struct {
	// contains filtered or unexported fields
}

func (ModifyIdentityIdFormatOutput) GoString added in v1.2.0 

func (s ModifyIdentityIdFormatOutput) GoString() string

GoString returns the string representation

func (ModifyIdentityIdFormatOutput) String added in v1.2.0 

func (s ModifyIdentityIdFormatOutput) String() string

String returns the string representation

type ModifyImageAttributeInput 

type ModifyImageAttributeInput struct {

	// The name of the attribute to modify.
	Attribute *string `type:"string"`

	// A description for the AMI.
	Description *AttributeValue `type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the AMI.
	ImageId *string `type:"string" required:"true"`

	// A launch permission modification.
	LaunchPermission *LaunchPermissionModifications `type:"structure"`

	// The operation type.
	OperationType *string `type:"string" enum:"OperationType"`

	// One or more product codes. After you add a product code to an AMI, it can't
	// be removed. This is only valid when modifying the productCodes attribute.
	ProductCodes []*string `locationName:"ProductCode" locationNameList:"ProductCode" type:"list"`

	// One or more user groups. This is only valid when modifying the launchPermission
	// attribute.
	UserGroups []*string `locationName:"UserGroup" locationNameList:"UserGroup" type:"list"`

	// One or more AWS account IDs. This is only valid when modifying the launchPermission
	// attribute.
	UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"`

	// The value of the attribute being modified. This is only valid when modifying
	// the description attribute.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyImageAttribute.

func (ModifyImageAttributeInput) GoString added in v0.6.5 

func (s ModifyImageAttributeInput) GoString() string

GoString returns the string representation

func (ModifyImageAttributeInput) String added in v0.6.5 

func (s ModifyImageAttributeInput) String() string

String returns the string representation

func (*ModifyImageAttributeInput) Validate added in v1.1.21 

func (s *ModifyImageAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyImageAttributeOutput 

type ModifyImageAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifyImageAttributeOutput) GoString added in v0.6.5 

func (s ModifyImageAttributeOutput) GoString() string

GoString returns the string representation

func (ModifyImageAttributeOutput) String added in v0.6.5 

func (s ModifyImageAttributeOutput) String() string

String returns the string representation

type ModifyInstanceAttributeInput 

type ModifyInstanceAttributeInput struct {

	// The name of the attribute.
	Attribute *string `locationName:"attribute" type:"string" enum:"InstanceAttributeName"`

	// Modifies the DeleteOnTermination attribute for volumes that are currently
	// attached. The volume must be owned by the caller. If no value is specified
	// for DeleteOnTermination, the default is true and the volume is deleted when
	// the instance is terminated.
	//
	// To add instance store volumes to an Amazon EBS-backed instance, you must
	// add them when you launch the instance. For more information, see Updating
	// the Block Device Mapping when Launching an Instance (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/block-device-mapping-concepts.html#Using_OverridingAMIBDM)
	// in the Amazon Elastic Compute Cloud User Guide.
	BlockDeviceMappings []*InstanceBlockDeviceMappingSpecification `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// If the value is true, you can't terminate the instance using the Amazon EC2
	// console, CLI, or API; otherwise, you can. You cannot use this paramater for
	// Spot Instances.
	DisableApiTermination *AttributeBooleanValue `locationName:"disableApiTermination" type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Specifies whether the instance is optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS
	// Optimized instance.
	EbsOptimized *AttributeBooleanValue `locationName:"ebsOptimized" type:"structure"`

	// Set to true to enable enhanced networking with ENA for the instance.
	//
	// This option is supported only for HVM instances. Specifying this option
	// with a PV instance can make it unreachable.
	EnaSupport *AttributeBooleanValue `locationName:"enaSupport" type:"structure"`

	// [EC2-VPC] Changes the security groups of the instance. You must specify at
	// least one security group, even if it's just the default security group for
	// the VPC. You must specify the security group ID, not the security group name.
	Groups []*string `locationName:"GroupId" locationNameList:"groupId" type:"list"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// Specifies whether an instance stops or terminates when you initiate shutdown
	// from the instance (using the operating system command for system shutdown).
	InstanceInitiatedShutdownBehavior *AttributeValue `locationName:"instanceInitiatedShutdownBehavior" type:"structure"`

	// Changes the instance type to the specified value. For more information, see
	// Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html).
	// If the instance type is not valid, the error returned is InvalidInstanceAttributeValue.
	InstanceType *AttributeValue `locationName:"instanceType" type:"structure"`

	// Changes the instance's kernel to the specified value. We recommend that you
	// use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB
	// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html).
	Kernel *AttributeValue `locationName:"kernel" type:"structure"`

	// Changes the instance's RAM disk to the specified value. We recommend that
	// you use PV-GRUB instead of kernels and RAM disks. For more information, see
	// PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedKernels.html).
	Ramdisk *AttributeValue `locationName:"ramdisk" type:"structure"`

	// Specifies whether source/destination checking is enabled. A value of true
	// means that checking is enabled, and false means checking is disabled. This
	// value must be false for a NAT instance to perform NAT.
	SourceDestCheck *AttributeBooleanValue `type:"structure"`

	// Set to simple to enable enhanced networking with the Intel 82599 Virtual
	// Function interface for the instance.
	//
	// There is no way to disable enhanced networking with the Intel 82599 Virtual
	// Function interface at this time.
	//
	// This option is supported only for HVM instances. Specifying this option
	// with a PV instance can make it unreachable.
	SriovNetSupport *AttributeValue `locationName:"sriovNetSupport" type:"structure"`

	// Changes the instance's user data to the specified value. If you are using
	// an AWS SDK or command line tool, Base64-encoding is performed for you, and
	// you can load the text from a file. Otherwise, you must provide Base64-encoded
	// text.
	UserData *BlobAttributeValue `locationName:"userData" type:"structure"`

	// A new value for the attribute. Use only with the kernel, ramdisk, userData,
	// disableApiTermination, or instanceInitiatedShutdownBehavior attribute.
	Value *string `locationName:"value" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyInstanceAttribute.

func (ModifyInstanceAttributeInput) GoString added in v0.6.5 

func (s ModifyInstanceAttributeInput) GoString() string

GoString returns the string representation

func (ModifyInstanceAttributeInput) String added in v0.6.5 

func (s ModifyInstanceAttributeInput) String() string

String returns the string representation

func (*ModifyInstanceAttributeInput) Validate added in v1.1.21 

func (s *ModifyInstanceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyInstanceAttributeOutput 

type ModifyInstanceAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifyInstanceAttributeOutput) GoString added in v0.6.5 

func (s ModifyInstanceAttributeOutput) GoString() string

GoString returns the string representation

func (ModifyInstanceAttributeOutput) String added in v0.6.5 

func (s ModifyInstanceAttributeOutput) String() string

String returns the string representation

type ModifyInstancePlacementInput added in v1.0.1 

type ModifyInstancePlacementInput struct {

	// The new affinity setting for the instance.
	Affinity *string `locationName:"affinity" type:"string" enum:"Affinity"`

	// The ID of the Dedicated Host that the instance will have affinity with.
	HostId *string `locationName:"hostId" type:"string"`

	// The ID of the instance that you are modifying.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`

	// The tenancy of the instance that you are modifying.
	Tenancy *string `locationName:"tenancy" type:"string" enum:"HostTenancy"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyInstancePlacement.

func (ModifyInstancePlacementInput) GoString added in v1.0.1 

func (s ModifyInstancePlacementInput) GoString() string

GoString returns the string representation

func (ModifyInstancePlacementInput) String added in v1.0.1 

func (s ModifyInstancePlacementInput) String() string

String returns the string representation

func (*ModifyInstancePlacementInput) Validate added in v1.1.21 

func (s *ModifyInstancePlacementInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyInstancePlacementOutput added in v1.0.1 

type ModifyInstancePlacementOutput struct {

	// Is true if the request succeeds, and an error otherwise.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of ModifyInstancePlacement.

func (ModifyInstancePlacementOutput) GoString added in v1.0.1 

func (s ModifyInstancePlacementOutput) GoString() string

GoString returns the string representation

func (ModifyInstancePlacementOutput) String added in v1.0.1 

func (s ModifyInstancePlacementOutput) String() string

String returns the string representation

type ModifyNetworkInterfaceAttributeInput 

type ModifyNetworkInterfaceAttributeInput struct {

	// Information about the interface attachment. If modifying the 'delete on termination'
	// attribute, you must specify the ID of the interface attachment.
	Attachment *NetworkInterfaceAttachmentChanges `locationName:"attachment" type:"structure"`

	// A description for the network interface.
	Description *AttributeValue `locationName:"description" type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Changes the security groups for the network interface. The new set of groups
	// you specify replaces the current set. You must specify at least one group,
	// even if it's just the default security group in the VPC. You must specify
	// the ID of the security group, not the name.
	Groups []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`

	// Indicates whether source/destination checking is enabled. A value of true
	// means checking is enabled, and false means checking is disabled. This value
	// must be false for a NAT instance to perform NAT. For more information, see
	// NAT Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_NAT_Instance.html)
	// in the Amazon Virtual Private Cloud User Guide.
	SourceDestCheck *AttributeBooleanValue `locationName:"sourceDestCheck" type:"structure"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyNetworkInterfaceAttribute.

func (ModifyNetworkInterfaceAttributeInput) GoString added in v0.6.5 

func (s ModifyNetworkInterfaceAttributeInput) GoString() string

GoString returns the string representation

func (ModifyNetworkInterfaceAttributeInput) String added in v0.6.5 

func (s ModifyNetworkInterfaceAttributeInput) String() string

String returns the string representation

func (*ModifyNetworkInterfaceAttributeInput) Validate added in v1.1.21 

func (s *ModifyNetworkInterfaceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyNetworkInterfaceAttributeOutput 

type ModifyNetworkInterfaceAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifyNetworkInterfaceAttributeOutput) GoString added in v0.6.5 

func (s ModifyNetworkInterfaceAttributeOutput) GoString() string

GoString returns the string representation

func (ModifyNetworkInterfaceAttributeOutput) String added in v0.6.5 

func (s ModifyNetworkInterfaceAttributeOutput) String() string

String returns the string representation

type ModifyReservedInstancesInput 

type ModifyReservedInstancesInput struct {

	// A unique, case-sensitive token you provide to ensure idempotency of your
	// modification request. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The IDs of the Reserved Instances to modify.
	ReservedInstancesIds []*string `locationName:"ReservedInstancesId" locationNameList:"ReservedInstancesId" type:"list" required:"true"`

	// The configuration settings for the Reserved Instances to modify.
	TargetConfigurations []*ReservedInstancesConfiguration `locationName:"ReservedInstancesConfigurationSetItemType" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyReservedInstances.

func (ModifyReservedInstancesInput) GoString added in v0.6.5 

func (s ModifyReservedInstancesInput) GoString() string

GoString returns the string representation

func (ModifyReservedInstancesInput) String added in v0.6.5 

func (s ModifyReservedInstancesInput) String() string

String returns the string representation

func (*ModifyReservedInstancesInput) Validate added in v1.1.21 

func (s *ModifyReservedInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyReservedInstancesOutput 

type ModifyReservedInstancesOutput struct {

	// The ID for the modification.
	ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of ModifyReservedInstances.

func (ModifyReservedInstancesOutput) GoString added in v0.6.5 

func (s ModifyReservedInstancesOutput) GoString() string

GoString returns the string representation

func (ModifyReservedInstancesOutput) String added in v0.6.5 

func (s ModifyReservedInstancesOutput) String() string

String returns the string representation

type ModifySnapshotAttributeInput 

type ModifySnapshotAttributeInput struct {

	// The snapshot attribute to modify.
	//
	//  Only volume creation permissions may be modified at the customer level.
	Attribute *string `type:"string" enum:"SnapshotAttributeName"`

	// A JSON representation of the snapshot attribute modification.
	CreateVolumePermission *CreateVolumePermissionModifications `type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The group to modify for the snapshot.
	GroupNames []*string `locationName:"UserGroup" locationNameList:"GroupName" type:"list"`

	// The type of operation to perform to the attribute.
	OperationType *string `type:"string" enum:"OperationType"`

	// The ID of the snapshot.
	SnapshotId *string `type:"string" required:"true"`

	// The account ID to modify for the snapshot.
	UserIds []*string `locationName:"UserId" locationNameList:"UserId" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifySnapshotAttribute.

func (ModifySnapshotAttributeInput) GoString added in v0.6.5 

func (s ModifySnapshotAttributeInput) GoString() string

GoString returns the string representation

func (ModifySnapshotAttributeInput) String added in v0.6.5 

func (s ModifySnapshotAttributeInput) String() string

String returns the string representation

func (*ModifySnapshotAttributeInput) Validate added in v1.1.21 

func (s *ModifySnapshotAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifySnapshotAttributeOutput 

type ModifySnapshotAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifySnapshotAttributeOutput) GoString added in v0.6.5 

func (s ModifySnapshotAttributeOutput) GoString() string

GoString returns the string representation

func (ModifySnapshotAttributeOutput) String added in v0.6.5 

func (s ModifySnapshotAttributeOutput) String() string

String returns the string representation

type ModifySpotFleetRequestInput added in v0.9.10 

type ModifySpotFleetRequestInput struct {

	// Indicates whether running Spot instances should be terminated if the target
	// capacity of the Spot fleet request is decreased below the current size of
	// the Spot fleet.
	ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`

	// The size of the fleet.
	TargetCapacity *int64 `locationName:"targetCapacity" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifySpotFleetRequest.

func (ModifySpotFleetRequestInput) GoString added in v0.9.10 

func (s ModifySpotFleetRequestInput) GoString() string

GoString returns the string representation

func (ModifySpotFleetRequestInput) String added in v0.9.10 

func (s ModifySpotFleetRequestInput) String() string

String returns the string representation

func (*ModifySpotFleetRequestInput) Validate added in v1.1.21 

func (s *ModifySpotFleetRequestInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifySpotFleetRequestOutput added in v0.9.10 

type ModifySpotFleetRequestOutput struct {

	// Is true if the request succeeds, and an error otherwise.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of ModifySpotFleetRequest.

func (ModifySpotFleetRequestOutput) GoString added in v0.9.10 

func (s ModifySpotFleetRequestOutput) GoString() string

GoString returns the string representation

func (ModifySpotFleetRequestOutput) String added in v0.9.10 

func (s ModifySpotFleetRequestOutput) String() string

String returns the string representation

type ModifySubnetAttributeInput 

type ModifySubnetAttributeInput struct {

	// Specify true to indicate that instances launched into the specified subnet
	// should be assigned public IP address.
	MapPublicIpOnLaunch *AttributeBooleanValue `type:"structure"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifySubnetAttribute.

func (ModifySubnetAttributeInput) GoString added in v0.6.5 

func (s ModifySubnetAttributeInput) GoString() string

GoString returns the string representation

func (ModifySubnetAttributeInput) String added in v0.6.5 

func (s ModifySubnetAttributeInput) String() string

String returns the string representation

func (*ModifySubnetAttributeInput) Validate added in v1.1.21 

func (s *ModifySubnetAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifySubnetAttributeOutput 

type ModifySubnetAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifySubnetAttributeOutput) GoString added in v0.6.5 

func (s ModifySubnetAttributeOutput) GoString() string

GoString returns the string representation

func (ModifySubnetAttributeOutput) String added in v0.6.5 

func (s ModifySubnetAttributeOutput) String() string

String returns the string representation

type ModifyVolumeAttributeInput 

type ModifyVolumeAttributeInput struct {

	// Indicates whether the volume should be auto-enabled for I/O operations.
	AutoEnableIO *AttributeBooleanValue `type:"structure"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the volume.
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyVolumeAttribute.

func (ModifyVolumeAttributeInput) GoString added in v0.6.5 

func (s ModifyVolumeAttributeInput) GoString() string

GoString returns the string representation

func (ModifyVolumeAttributeInput) String added in v0.6.5 

func (s ModifyVolumeAttributeInput) String() string

String returns the string representation

func (*ModifyVolumeAttributeInput) Validate added in v1.1.21 

func (s *ModifyVolumeAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyVolumeAttributeOutput 

type ModifyVolumeAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifyVolumeAttributeOutput) GoString added in v0.6.5 

func (s ModifyVolumeAttributeOutput) GoString() string

GoString returns the string representation

func (ModifyVolumeAttributeOutput) String added in v0.6.5 

func (s ModifyVolumeAttributeOutput) String() string

String returns the string representation

type ModifyVpcAttributeInput added in v0.9.5 

type ModifyVpcAttributeInput struct {

	// Indicates whether the instances launched in the VPC get DNS hostnames. If
	// enabled, instances in the VPC get DNS hostnames; otherwise, they do not.
	//
	// You cannot modify the DNS resolution and DNS hostnames attributes in the
	// same request. Use separate requests for each attribute. You can only enable
	// DNS hostnames if you've enabled DNS support.
	EnableDnsHostnames *AttributeBooleanValue `type:"structure"`

	// Indicates whether the DNS resolution is supported for the VPC. If enabled,
	// queries to the Amazon provided DNS server at the 169.254.169.253 IP address,
	// or the reserved IP address at the base of the VPC network range "plus two"
	// will succeed. If disabled, the Amazon provided DNS service in the VPC that
	// resolves public DNS hostnames to IP addresses is not enabled.
	//
	// You cannot modify the DNS resolution and DNS hostnames attributes in the
	// same request. Use separate requests for each attribute.
	EnableDnsSupport *AttributeBooleanValue `type:"structure"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyVpcAttribute.

func (ModifyVpcAttributeInput) GoString added in v0.9.5 

func (s ModifyVpcAttributeInput) GoString() string

GoString returns the string representation

func (ModifyVpcAttributeInput) String added in v0.9.5 

func (s ModifyVpcAttributeInput) String() string

String returns the string representation

func (*ModifyVpcAttributeInput) Validate added in v1.1.21 

func (s *ModifyVpcAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyVpcAttributeOutput added in v0.9.5 

type ModifyVpcAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ModifyVpcAttributeOutput) GoString added in v0.9.5 

func (s ModifyVpcAttributeOutput) GoString() string

GoString returns the string representation

func (ModifyVpcAttributeOutput) String added in v0.9.5 

func (s ModifyVpcAttributeOutput) String() string

String returns the string representation

type ModifyVpcEndpointInput added in v0.9.5 

type ModifyVpcEndpointInput struct {

	// One or more route tables IDs to associate with the endpoint.
	AddRouteTableIds []*string `locationName:"AddRouteTableId" locationNameList:"item" type:"list"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// A policy document to attach to the endpoint. The policy must be in valid
	// JSON format.
	PolicyDocument *string `type:"string"`

	// One or more route table IDs to disassociate from the endpoint.
	RemoveRouteTableIds []*string `locationName:"RemoveRouteTableId" locationNameList:"item" type:"list"`

	// Specify true to reset the policy document to the default policy. The default
	// policy allows access to the service.
	ResetPolicy *bool `type:"boolean"`

	// The ID of the endpoint.
	VpcEndpointId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyVpcEndpoint.

func (ModifyVpcEndpointInput) GoString added in v0.9.5 

func (s ModifyVpcEndpointInput) GoString() string

GoString returns the string representation

func (ModifyVpcEndpointInput) String added in v0.9.5 

func (s ModifyVpcEndpointInput) String() string

String returns the string representation

func (*ModifyVpcEndpointInput) Validate added in v1.1.21 

func (s *ModifyVpcEndpointInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyVpcEndpointOutput added in v0.9.5 

type ModifyVpcEndpointOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of ModifyVpcEndpoint.

func (ModifyVpcEndpointOutput) GoString added in v0.9.5 

func (s ModifyVpcEndpointOutput) GoString() string

GoString returns the string representation

func (ModifyVpcEndpointOutput) String added in v0.9.5 

func (s ModifyVpcEndpointOutput) String() string

String returns the string representation

type ModifyVpcPeeringConnectionOptionsInput added in v1.1.21 

type ModifyVpcPeeringConnectionOptionsInput struct {

	// The VPC peering connection options for the accepter VPC.
	AccepterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"`

	// Checks whether you have the required permissions for the operation, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The VPC peering connection options for the requester VPC.
	RequesterPeeringConnectionOptions *PeeringConnectionOptionsRequest `type:"structure"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (ModifyVpcPeeringConnectionOptionsInput) GoString added in v1.1.21 

func (s ModifyVpcPeeringConnectionOptionsInput) GoString() string

GoString returns the string representation

func (ModifyVpcPeeringConnectionOptionsInput) String added in v1.1.21 

func (s ModifyVpcPeeringConnectionOptionsInput) String() string

String returns the string representation

func (*ModifyVpcPeeringConnectionOptionsInput) Validate added in v1.1.21 

func (s *ModifyVpcPeeringConnectionOptionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyVpcPeeringConnectionOptionsOutput added in v1.1.21 

type ModifyVpcPeeringConnectionOptionsOutput struct {

	// Information about the VPC peering connection options for the accepter VPC.
	AccepterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"accepterPeeringConnectionOptions" type:"structure"`

	// Information about the VPC peering connection options for the requester VPC.
	RequesterPeeringConnectionOptions *PeeringConnectionOptions `locationName:"requesterPeeringConnectionOptions" type:"structure"`
	// contains filtered or unexported fields
}

func (ModifyVpcPeeringConnectionOptionsOutput) GoString added in v1.1.21 

func (s ModifyVpcPeeringConnectionOptionsOutput) GoString() string

GoString returns the string representation

func (ModifyVpcPeeringConnectionOptionsOutput) String added in v1.1.21 

func (s ModifyVpcPeeringConnectionOptionsOutput) String() string

String returns the string representation

type MonitorInstancesInput 

type MonitorInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for MonitorInstances.

func (MonitorInstancesInput) GoString added in v0.6.5 

func (s MonitorInstancesInput) GoString() string

GoString returns the string representation

func (MonitorInstancesInput) String added in v0.6.5 

func (s MonitorInstancesInput) String() string

String returns the string representation

func (*MonitorInstancesInput) Validate added in v1.1.21 

func (s *MonitorInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type MonitorInstancesOutput 

type MonitorInstancesOutput struct {

	// Monitoring information for one or more instances.
	InstanceMonitorings []*InstanceMonitoring `locationName:"instancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of MonitorInstances.

func (MonitorInstancesOutput) GoString added in v0.6.5 

func (s MonitorInstancesOutput) GoString() string

GoString returns the string representation

func (MonitorInstancesOutput) String added in v0.6.5 

func (s MonitorInstancesOutput) String() string

String returns the string representation

type Monitoring 

type Monitoring struct {

	// Indicates whether monitoring is enabled for the instance.
	State *string `locationName:"state" type:"string" enum:"MonitoringState"`
	// contains filtered or unexported fields
}

Describes the monitoring for the instance.

func (Monitoring) GoString added in v0.6.5 

func (s Monitoring) GoString() string

GoString returns the string representation

func (Monitoring) String added in v0.6.5 

func (s Monitoring) String() string

String returns the string representation

type MoveAddressToVpcInput added in v0.9.5 

type MoveAddressToVpcInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for MoveAddressToVpc.

func (MoveAddressToVpcInput) GoString added in v0.9.5 

func (s MoveAddressToVpcInput) GoString() string

GoString returns the string representation

func (MoveAddressToVpcInput) String added in v0.9.5 

func (s MoveAddressToVpcInput) String() string

String returns the string representation

func (*MoveAddressToVpcInput) Validate added in v1.1.21 

func (s *MoveAddressToVpcInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type MoveAddressToVpcOutput added in v0.9.5 

type MoveAddressToVpcOutput struct {

	// The allocation ID for the Elastic IP address.
	AllocationId *string `locationName:"allocationId" type:"string"`

	// The status of the move of the IP address.
	Status *string `locationName:"status" type:"string" enum:"Status"`
	// contains filtered or unexported fields
}

Contains the output of MoveAddressToVpc.

func (MoveAddressToVpcOutput) GoString added in v0.9.5 

func (s MoveAddressToVpcOutput) GoString() string

GoString returns the string representation

func (MoveAddressToVpcOutput) String added in v0.9.5 

func (s MoveAddressToVpcOutput) String() string

String returns the string representation

type MovingAddressStatus 

type MovingAddressStatus struct {

	// The status of the Elastic IP address that's being moved to the EC2-VPC platform,
	// or restored to the EC2-Classic platform.
	MoveStatus *string `locationName:"moveStatus" type:"string" enum:"MoveStatus"`

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Describes the status of a moving Elastic IP address.

func (MovingAddressStatus) GoString added in v0.6.5 

func (s MovingAddressStatus) GoString() string

GoString returns the string representation

func (MovingAddressStatus) String added in v0.6.5 

func (s MovingAddressStatus) String() string

String returns the string representation

type NatGateway added in v1.0.6 

type NatGateway struct {

	// The date and time the NAT gateway was created.
	CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"`

	// The date and time the NAT gateway was deleted, if applicable.
	DeleteTime *time.Time `locationName:"deleteTime" type:"timestamp" timestampFormat:"iso8601"`

	// If the NAT gateway could not be created, specifies the error code for the
	// failure. (InsufficientFreeAddressesInSubnet | Gateway.NotAttached | InvalidAllocationID.NotFound
	// | Resource.AlreadyAssociated | InternalError | InvalidSubnetID.NotFound)
	FailureCode *string `locationName:"failureCode" type:"string"`

	// If the NAT gateway could not be created, specifies the error message for
	// the failure, that corresponds to the error code.
	//
	//   For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free addresses
	// to create this NAT gateway"
	//
	//   For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway
	// attached"
	//
	//   For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx
	// could not be associated with this NAT gateway"
	//
	//   For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx
	// is already associated"
	//
	//   For InternalError: "Network interface eni-xxxxxxxx, created and used internally
	// by this NAT gateway is in an invalid state. Please try again."
	//
	//   For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx does
	// not exist or could not be found."
	FailureMessage *string `locationName:"failureMessage" type:"string"`

	// Information about the IP addresses and network interface associated with
	// the NAT gateway.
	NatGatewayAddresses []*NatGatewayAddress `locationName:"natGatewayAddressSet" locationNameList:"item" type:"list"`

	// The ID of the NAT gateway.
	NatGatewayId *string `locationName:"natGatewayId" type:"string"`

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	ProvisionedBandwidth *ProvisionedBandwidth `locationName:"provisionedBandwidth" type:"structure"`

	// The state of the NAT gateway.
	//
	//    pending: The NAT gateway is being created and is not ready to process
	// traffic.
	//
	//    failed: The NAT gateway could not be created. Check the failureCode and
	// failureMessage fields for the reason.
	//
	//    available: The NAT gateway is able to process traffic. This status remains
	// until you delete the NAT gateway, and does not indicate the health of the
	// NAT gateway.
	//
	//    deleting: The NAT gateway is in the process of being terminated and may
	// still be processing traffic.
	//
	//    deleted: The NAT gateway has been terminated and is no longer processing
	// traffic.
	State *string `locationName:"state" type:"string" enum:"NatGatewayState"`

	// The ID of the subnet in which the NAT gateway is located.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The ID of the VPC in which the NAT gateway is located.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a NAT gateway.

func (NatGateway) GoString added in v1.0.6 

func (s NatGateway) GoString() string

GoString returns the string representation

func (NatGateway) String added in v1.0.6 

func (s NatGateway) String() string

String returns the string representation

type NatGatewayAddress added in v1.0.6 

type NatGatewayAddress struct {

	// The allocation ID of the Elastic IP address that's associated with the NAT
	// gateway.
	AllocationId *string `locationName:"allocationId" type:"string"`

	// The ID of the network interface associated with the NAT gateway.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The private IP address associated with the Elastic IP address.
	PrivateIp *string `locationName:"privateIp" type:"string"`

	// The Elastic IP address associated with the NAT gateway.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Describes the IP addresses and network interface associated with a NAT gateway.

func (NatGatewayAddress) GoString added in v1.0.6 

func (s NatGatewayAddress) GoString() string

GoString returns the string representation

func (NatGatewayAddress) String added in v1.0.6 

func (s NatGatewayAddress) String() string

String returns the string representation

type NetworkAcl added in v0.9.5 

type NetworkAcl struct {

	// Any associations between the network ACL and one or more subnets
	Associations []*NetworkAclAssociation `locationName:"associationSet" locationNameList:"item" type:"list"`

	// One or more entries (rules) in the network ACL.
	Entries []*NetworkAclEntry `locationName:"entrySet" locationNameList:"item" type:"list"`

	// Indicates whether this is the default network ACL for the VPC.
	IsDefault *bool `locationName:"default" type:"boolean"`

	// The ID of the network ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string"`

	// Any tags assigned to the network ACL.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC for the network ACL.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a network ACL.

func (NetworkAcl) GoString added in v0.9.5 

func (s NetworkAcl) GoString() string

GoString returns the string representation

func (NetworkAcl) String added in v0.9.5 

func (s NetworkAcl) String() string

String returns the string representation

type NetworkAclAssociation added in v0.9.5 

type NetworkAclAssociation struct {

	// The ID of the association between a network ACL and a subnet.
	NetworkAclAssociationId *string `locationName:"networkAclAssociationId" type:"string"`

	// The ID of the network ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string"`
	// contains filtered or unexported fields
}

Describes an association between a network ACL and a subnet.

func (NetworkAclAssociation) GoString added in v0.9.5 

func (s NetworkAclAssociation) GoString() string

GoString returns the string representation

func (NetworkAclAssociation) String added in v0.9.5 

func (s NetworkAclAssociation) String() string

String returns the string representation

type NetworkAclEntry added in v0.9.5 

type NetworkAclEntry struct {

	// The network range to allow or deny, in CIDR notation.
	CidrBlock *string `locationName:"cidrBlock" type:"string"`

	// Indicates whether the rule is an egress rule (applied to traffic leaving
	// the subnet).
	Egress *bool `locationName:"egress" type:"boolean"`

	// ICMP protocol: The ICMP type and code.
	IcmpTypeCode *IcmpTypeCode `locationName:"icmpTypeCode" type:"structure"`

	// TCP or UDP protocols: The range of ports the rule applies to.
	PortRange *PortRange `locationName:"portRange" type:"structure"`

	// The protocol. A value of -1 means all protocols.
	Protocol *string `locationName:"protocol" type:"string"`

	// Indicates whether to allow or deny the traffic that matches the rule.
	RuleAction *string `locationName:"ruleAction" type:"string" enum:"RuleAction"`

	// The rule number for the entry. ACL entries are processed in ascending order
	// by rule number.
	RuleNumber *int64 `locationName:"ruleNumber" type:"integer"`
	// contains filtered or unexported fields
}

Describes an entry in a network ACL.

func (NetworkAclEntry) GoString added in v0.9.5 

func (s NetworkAclEntry) GoString() string

GoString returns the string representation

func (NetworkAclEntry) String added in v0.9.5 

func (s NetworkAclEntry) String() string

String returns the string representation

type NetworkInterface 

type NetworkInterface struct {

	// The association information for an Elastic IP associated with the network
	// interface.
	Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"`

	// The network interface attachment.
	Attachment *NetworkInterfaceAttachment `locationName:"attachment" type:"structure"`

	// The Availability Zone.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// A description.
	Description *string `locationName:"description" type:"string"`

	// Any security groups for the network interface.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The type of interface.
	InterfaceType *string `locationName:"interfaceType" type:"string" enum:"NetworkInterfaceType"`

	// The MAC address.
	MacAddress *string `locationName:"macAddress" type:"string"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The AWS account ID of the owner of the network interface.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The private DNS name.
	PrivateDnsName *string `locationName:"privateDnsName" type:"string"`

	// The IP address of the network interface within the subnet.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The private IP addresses associated with the network interface.
	PrivateIpAddresses []*NetworkInterfacePrivateIpAddress `locationName:"privateIpAddressesSet" locationNameList:"item" type:"list"`

	// The ID of the entity that launched the instance on your behalf (for example,
	// AWS Management Console or Auto Scaling).
	RequesterId *string `locationName:"requesterId" type:"string"`

	// Indicates whether the network interface is being managed by AWS.
	RequesterManaged *bool `locationName:"requesterManaged" type:"boolean"`

	// Indicates whether traffic to or from the instance is validated.
	SourceDestCheck *bool `locationName:"sourceDestCheck" type:"boolean"`

	// The status of the network interface.
	Status *string `locationName:"status" type:"string" enum:"NetworkInterfaceStatus"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// Any tags assigned to the network interface.
	TagSet []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a network interface.

func (NetworkInterface) GoString added in v0.6.5 

func (s NetworkInterface) GoString() string

GoString returns the string representation

func (NetworkInterface) String added in v0.6.5 

func (s NetworkInterface) String() string

String returns the string representation

type NetworkInterfaceAssociation 

type NetworkInterfaceAssociation struct {

	// The allocation ID.
	AllocationId *string `locationName:"allocationId" type:"string"`

	// The association ID.
	AssociationId *string `locationName:"associationId" type:"string"`

	// The ID of the Elastic IP address owner.
	IpOwnerId *string `locationName:"ipOwnerId" type:"string"`

	// The public DNS name.
	PublicDnsName *string `locationName:"publicDnsName" type:"string"`

	// The address of the Elastic IP address bound to the network interface.
	PublicIp *string `locationName:"publicIp" type:"string"`
	// contains filtered or unexported fields
}

Describes association information for an Elastic IP address.

func (NetworkInterfaceAssociation) GoString added in v0.6.5 

func (s NetworkInterfaceAssociation) GoString() string

GoString returns the string representation

func (NetworkInterfaceAssociation) String added in v0.6.5 

func (s NetworkInterfaceAssociation) String() string

String returns the string representation

type NetworkInterfaceAttachment 

type NetworkInterfaceAttachment struct {

	// The timestamp indicating when the attachment initiated.
	AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"`

	// The ID of the network interface attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string"`

	// Indicates whether the network interface is deleted when the instance is terminated.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The device index of the network interface attachment on the instance.
	DeviceIndex *int64 `locationName:"deviceIndex" type:"integer"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The AWS account ID of the owner of the instance.
	InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"`

	// The attachment state.
	Status *string `locationName:"status" type:"string" enum:"AttachmentStatus"`
	// contains filtered or unexported fields
}

Describes a network interface attachment.

func (NetworkInterfaceAttachment) GoString added in v0.6.5 

func (s NetworkInterfaceAttachment) GoString() string

GoString returns the string representation

func (NetworkInterfaceAttachment) String added in v0.6.5 

func (s NetworkInterfaceAttachment) String() string

String returns the string representation

type NetworkInterfaceAttachmentChanges 

type NetworkInterfaceAttachmentChanges struct {

	// The ID of the network interface attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string"`

	// Indicates whether the network interface is deleted when the instance is terminated.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`
	// contains filtered or unexported fields
}

Describes an attachment change.

func (NetworkInterfaceAttachmentChanges) GoString added in v0.6.5 

func (s NetworkInterfaceAttachmentChanges) GoString() string

GoString returns the string representation

func (NetworkInterfaceAttachmentChanges) String added in v0.6.5 

func (s NetworkInterfaceAttachmentChanges) String() string

String returns the string representation

type NetworkInterfacePrivateIpAddress added in v0.9.5 

type NetworkInterfacePrivateIpAddress struct {

	// The association information for an Elastic IP address associated with the
	// network interface.
	Association *NetworkInterfaceAssociation `locationName:"association" type:"structure"`

	// Indicates whether this IP address is the primary private IP address of the
	// network interface.
	Primary *bool `locationName:"primary" type:"boolean"`

	// The private DNS name.
	PrivateDnsName *string `locationName:"privateDnsName" type:"string"`

	// The private IP address.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`
	// contains filtered or unexported fields
}

Describes the private IP address of a network interface.

func (NetworkInterfacePrivateIpAddress) GoString added in v0.9.5 

func (s NetworkInterfacePrivateIpAddress) GoString() string

GoString returns the string representation

func (NetworkInterfacePrivateIpAddress) String added in v0.9.5 

func (s NetworkInterfacePrivateIpAddress) String() string

String returns the string representation

type NewDhcpConfiguration added in v0.9.5 

type NewDhcpConfiguration struct {
	Key *string `locationName:"key" type:"string"`

	Values []*string `locationName:"Value" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

func (NewDhcpConfiguration) GoString added in v0.9.5 

func (s NewDhcpConfiguration) GoString() string

GoString returns the string representation

func (NewDhcpConfiguration) String added in v0.9.5 

func (s NewDhcpConfiguration) String() string

String returns the string representation

type PeeringConnectionOptions added in v1.1.21 

type PeeringConnectionOptions struct {

	// If true, enables a local VPC to resolve public DNS hostnames to private IP
	// addresses when queried from instances in the peer VPC.
	AllowDnsResolutionFromRemoteVpc *bool `locationName:"allowDnsResolutionFromRemoteVpc" type:"boolean"`

	// If true, enables outbound communication from an EC2-Classic instance that's
	// linked to a local VPC via ClassicLink to instances in a peer VPC.
	AllowEgressFromLocalClassicLinkToRemoteVpc *bool `locationName:"allowEgressFromLocalClassicLinkToRemoteVpc" type:"boolean"`

	// If true, enables outbound communication from instances in a local VPC to
	// an EC2-Classic instance that's linked to a peer VPC via ClassicLink.
	AllowEgressFromLocalVpcToRemoteClassicLink *bool `locationName:"allowEgressFromLocalVpcToRemoteClassicLink" type:"boolean"`
	// contains filtered or unexported fields
}

Describes the VPC peering connection options.

func (PeeringConnectionOptions) GoString added in v1.1.21 

func (s PeeringConnectionOptions) GoString() string

GoString returns the string representation

func (PeeringConnectionOptions) String added in v1.1.21 

func (s PeeringConnectionOptions) String() string

String returns the string representation

type PeeringConnectionOptionsRequest added in v1.1.21 

type PeeringConnectionOptionsRequest struct {

	// If true, enables a local VPC to resolve public DNS hostnames to private IP
	// addresses when queried from instances in the peer VPC.
	AllowDnsResolutionFromRemoteVpc *bool `type:"boolean"`

	// If true, enables outbound communication from an EC2-Classic instance that's
	// linked to a local VPC via ClassicLink to instances in a peer VPC.
	AllowEgressFromLocalClassicLinkToRemoteVpc *bool `type:"boolean"`

	// If true, enables outbound communication from instances in a local VPC to
	// an EC2-Classic instance that's linked to a peer VPC via ClassicLink.
	AllowEgressFromLocalVpcToRemoteClassicLink *bool `type:"boolean"`
	// contains filtered or unexported fields
}

The VPC peering connection options.

func (PeeringConnectionOptionsRequest) GoString added in v1.1.21 

func (s PeeringConnectionOptionsRequest) GoString() string

GoString returns the string representation

func (PeeringConnectionOptionsRequest) String added in v1.1.21 

func (s PeeringConnectionOptionsRequest) String() string

String returns the string representation

type Placement 

type Placement struct {

	// The affinity setting for the instance on the Dedicated Host. This parameter
	// is not supported for the ImportInstance command.
	Affinity *string `locationName:"affinity" type:"string"`

	// The Availability Zone of the instance.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The name of the placement group the instance is in (for cluster compute instances).
	GroupName *string `locationName:"groupName" type:"string"`

	// The ID of the Dedicted host on which the instance resides. This parameter
	// is not support for the ImportInstance command.
	HostId *string `locationName:"hostId" type:"string"`

	// The tenancy of the instance (if the instance is running in a VPC). An instance
	// with a tenancy of dedicated runs on single-tenant hardware. The host tenancy
	// is not supported for the ImportInstance command.
	Tenancy *string `locationName:"tenancy" type:"string" enum:"Tenancy"`
	// contains filtered or unexported fields
}

Describes the placement for the instance.

func (Placement) GoString added in v0.6.5 

func (s Placement) GoString() string

GoString returns the string representation

func (Placement) String added in v0.6.5 

func (s Placement) String() string

String returns the string representation

type PlacementGroup 

type PlacementGroup struct {

	// The name of the placement group.
	GroupName *string `locationName:"groupName" type:"string"`

	// The state of the placement group.
	State *string `locationName:"state" type:"string" enum:"PlacementGroupState"`

	// The placement strategy.
	Strategy *string `locationName:"strategy" type:"string" enum:"PlacementStrategy"`
	// contains filtered or unexported fields
}

Describes a placement group.

func (PlacementGroup) GoString added in v0.6.5 

func (s PlacementGroup) GoString() string

GoString returns the string representation

func (PlacementGroup) String added in v0.6.5 

func (s PlacementGroup) String() string

String returns the string representation

type PortRange 

type PortRange struct {

	// The first port in the range.
	From *int64 `locationName:"from" type:"integer"`

	// The last port in the range.
	To *int64 `locationName:"to" type:"integer"`
	// contains filtered or unexported fields
}

Describes a range of ports.

func (PortRange) GoString added in v0.6.5 

func (s PortRange) GoString() string

GoString returns the string representation

func (PortRange) String added in v0.6.5 

func (s PortRange) String() string

String returns the string representation

type PrefixList 

type PrefixList struct {

	// The IP address range of the AWS service.
	Cidrs []*string `locationName:"cidrSet" locationNameList:"item" type:"list"`

	// The ID of the prefix.
	PrefixListId *string `locationName:"prefixListId" type:"string"`

	// The name of the prefix.
	PrefixListName *string `locationName:"prefixListName" type:"string"`
	// contains filtered or unexported fields
}

Describes prefixes for AWS services.

func (PrefixList) GoString added in v0.6.5 

func (s PrefixList) GoString() string

GoString returns the string representation

func (PrefixList) String added in v0.6.5 

func (s PrefixList) String() string

String returns the string representation

type PrefixListId added in v0.9.5 

type PrefixListId struct {

	// The ID of the prefix.
	PrefixListId *string `locationName:"prefixListId" type:"string"`
	// contains filtered or unexported fields
}

The ID of the prefix.

func (PrefixListId) GoString added in v0.9.5 

func (s PrefixListId) GoString() string

GoString returns the string representation

func (PrefixListId) String added in v0.9.5 

func (s PrefixListId) String() string

String returns the string representation

type PriceSchedule 

type PriceSchedule struct {

	// The current price schedule, as determined by the term remaining for the Reserved
	// Instance in the listing.
	//
	// A specific price schedule is always in effect, but only one price schedule
	// can be active at any time. Take, for example, a Reserved Instance listing
	// that has five months remaining in its term. When you specify price schedules
	// for five months and two months, this means that schedule 1, covering the
	// first three months of the remaining term, will be active during months 5,
	// 4, and 3. Then schedule 2, covering the last two months of the term, will
	// be active for months 2 and 1.
	Active *bool `locationName:"active" type:"boolean"`

	// The currency for transacting the Reserved Instance resale. At this time,
	// the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The fixed price for the term.
	Price *float64 `locationName:"price" type:"double"`

	// The number of months remaining in the reservation. For example, 2 is the
	// second to the last month before the capacity reservation expires.
	Term *int64 `locationName:"term" type:"long"`
	// contains filtered or unexported fields
}

Describes the price for a Reserved Instance.

func (PriceSchedule) GoString added in v0.6.5 

func (s PriceSchedule) GoString() string

GoString returns the string representation

func (PriceSchedule) String added in v0.6.5 

func (s PriceSchedule) String() string

String returns the string representation

type PriceScheduleSpecification 

type PriceScheduleSpecification struct {

	// The currency for transacting the Reserved Instance resale. At this time,
	// the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The fixed price for the term.
	Price *float64 `locationName:"price" type:"double"`

	// The number of months remaining in the reservation. For example, 2 is the
	// second to the last month before the capacity reservation expires.
	Term *int64 `locationName:"term" type:"long"`
	// contains filtered or unexported fields
}

Describes the price for a Reserved Instance.

func (PriceScheduleSpecification) GoString added in v0.6.5 

func (s PriceScheduleSpecification) GoString() string

GoString returns the string representation

func (PriceScheduleSpecification) String added in v0.6.5 

func (s PriceScheduleSpecification) String() string

String returns the string representation

type PricingDetail 

type PricingDetail struct {

	// The number of reservations available for the price.
	Count *int64 `locationName:"count" type:"integer"`

	// The price per instance.
	Price *float64 `locationName:"price" type:"double"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance offering.

func (PricingDetail) GoString added in v0.6.5 

func (s PricingDetail) GoString() string

GoString returns the string representation

func (PricingDetail) String added in v0.6.5 

func (s PricingDetail) String() string

String returns the string representation

type PrivateIpAddressSpecification added in v0.9.5 

type PrivateIpAddressSpecification struct {

	// Indicates whether the private IP address is the primary private IP address.
	// Only one IP address can be designated as primary.
	Primary *bool `locationName:"primary" type:"boolean"`

	// The private IP addresses.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a secondary private IP address for a network interface.

func (PrivateIpAddressSpecification) GoString added in v0.9.5 

func (s PrivateIpAddressSpecification) GoString() string

GoString returns the string representation

func (PrivateIpAddressSpecification) String added in v0.9.5 

func (s PrivateIpAddressSpecification) String() string

String returns the string representation

func (*PrivateIpAddressSpecification) Validate added in v1.1.21 

func (s *PrivateIpAddressSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ProductCode 

type ProductCode struct {

	// The product code.
	ProductCodeId *string `locationName:"productCode" type:"string"`

	// The type of product code.
	ProductCodeType *string `locationName:"type" type:"string" enum:"ProductCodeValues"`
	// contains filtered or unexported fields
}

Describes a product code.

func (ProductCode) GoString added in v0.6.5 

func (s ProductCode) GoString() string

GoString returns the string representation

func (ProductCode) String added in v0.6.5 

func (s ProductCode) String() string

String returns the string representation

type PropagatingVgw added in v0.9.5 

type PropagatingVgw struct {

	// The ID of the virtual private gateway (VGW).
	GatewayId *string `locationName:"gatewayId" type:"string"`
	// contains filtered or unexported fields
}

Describes a virtual private gateway propagating route.

func (PropagatingVgw) GoString added in v0.9.5 

func (s PropagatingVgw) GoString() string

GoString returns the string representation

func (PropagatingVgw) String added in v0.9.5 

func (s PropagatingVgw) String() string

String returns the string representation

type ProvisionedBandwidth added in v1.1.30 

type ProvisionedBandwidth struct {

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	ProvisionTime *time.Time `locationName:"provisionTime" type:"timestamp" timestampFormat:"iso8601"`

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	Provisioned *string `locationName:"provisioned" type:"string"`

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	RequestTime *time.Time `locationName:"requestTime" type:"timestamp" timestampFormat:"iso8601"`

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	Requested *string `locationName:"requested" type:"string"`

	// Reserved. If you need to sustain traffic greater than the documented limits
	// (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html),
	// contact us through the Support Center (https://console.aws.amazon.com/support/home?).
	Status *string `locationName:"status" type:"string"`
	// contains filtered or unexported fields
}

Reserved. If you need to sustain traffic greater than the documented limits (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/vpc-nat-gateway.html), contact us through the Support Center (https://console.aws.amazon.com/support/home?).

func (ProvisionedBandwidth) GoString added in v1.1.30 

func (s ProvisionedBandwidth) GoString() string

GoString returns the string representation

func (ProvisionedBandwidth) String added in v1.1.30 

func (s ProvisionedBandwidth) String() string

String returns the string representation

type Purchase added in v1.4.3 

type Purchase struct {

	// The currency in which the UpfrontPrice and HourlyPrice amounts are specified.
	// At this time, the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The duration of the reservation's term in seconds.
	Duration *int64 `locationName:"duration" type:"integer"`

	// The IDs of the Dedicated Hosts associated with the reservation.
	HostIdSet []*string `locationName:"hostIdSet" locationNameList:"item" type:"list"`

	// The ID of the reservation.
	HostReservationId *string `locationName:"hostReservationId" type:"string"`

	// The hourly price of the reservation per hour.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The instance family on the Dedicated Host that the reservation can be associated
	// with.
	InstanceFamily *string `locationName:"instanceFamily" type:"string"`

	// The payment option for the reservation.
	PaymentOption *string `locationName:"paymentOption" type:"string" enum:"PaymentOption"`

	// The upfront price of the reservation.
	UpfrontPrice *string `locationName:"upfrontPrice" type:"string"`
	// contains filtered or unexported fields
}

Describes the result of the purchase.

func (Purchase) GoString added in v1.4.3 

func (s Purchase) GoString() string

GoString returns the string representation

func (Purchase) String added in v1.4.3 

func (s Purchase) String() string

String returns the string representation

type PurchaseHostReservationInput added in v1.4.3 

type PurchaseHostReservationInput struct {

	// Unique, case-sensitive identifier you provide to ensure idempotency of the
	// request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	ClientToken *string `type:"string"`

	// The currency in which the totalUpfrontPrice, LimitPrice, and totalHourlyPrice
	// amounts are specified. At this time, the only supported currency is USD.
	CurrencyCode *string `type:"string" enum:"CurrencyCodeValues"`

	// The ID/s of the Dedicated Host/s that the reservation will be associated
	// with.
	HostIdSet []*string `locationNameList:"item" type:"list" required:"true"`

	// The specified limit is checked against the total upfront cost of the reservation
	// (calculated as the offering's upfront cost multiplied by the host count).
	// If the total upfront cost is greater than the specified price limit, the
	// request will fail. This is used to ensure that the purchase does not exceed
	// the expected upfront cost of the purchase. At this time, the only supported
	// currency is USD. For example, to indicate a limit price of USD 100, specify
	// 100.00.
	LimitPrice *string `type:"string"`

	// The ID of the offering.
	OfferingId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (PurchaseHostReservationInput) GoString added in v1.4.3 

func (s PurchaseHostReservationInput) GoString() string

GoString returns the string representation

func (PurchaseHostReservationInput) String added in v1.4.3 

func (s PurchaseHostReservationInput) String() string

String returns the string representation

func (*PurchaseHostReservationInput) Validate added in v1.4.3 

func (s *PurchaseHostReservationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PurchaseHostReservationOutput added in v1.4.3 

type PurchaseHostReservationOutput struct {

	// Unique, case-sensitive identifier you provide to ensure idempotency of the
	// request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The currency in which the totalUpfrontPrice and totalHourlyPrice amounts
	// are specified. At this time, the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// Describes the details of the purchase.
	Purchase []*Purchase `locationName:"purchase" type:"list"`

	// The total hourly price of the reservation calculated per hour.
	TotalHourlyPrice *string `locationName:"totalHourlyPrice" type:"string"`

	// The total amount that will be charged to your account when you purchase the
	// reservation.
	TotalUpfrontPrice *string `locationName:"totalUpfrontPrice" type:"string"`
	// contains filtered or unexported fields
}

func (PurchaseHostReservationOutput) GoString added in v1.4.3 

func (s PurchaseHostReservationOutput) GoString() string

GoString returns the string representation

func (PurchaseHostReservationOutput) String added in v1.4.3 

func (s PurchaseHostReservationOutput) String() string

String returns the string representation

type PurchaseRequest added in v1.0.9 

type PurchaseRequest struct {

	// The number of instances.
	InstanceCount *int64 `type:"integer" required:"true"`

	// The purchase token.
	PurchaseToken *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Describes a request to purchase Scheduled Instances.

func (PurchaseRequest) GoString added in v1.0.9 

func (s PurchaseRequest) GoString() string

GoString returns the string representation

func (PurchaseRequest) String added in v1.0.9 

func (s PurchaseRequest) String() string

String returns the string representation

func (*PurchaseRequest) Validate added in v1.1.21 

func (s *PurchaseRequest) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PurchaseReservedInstancesOfferingInput 

type PurchaseReservedInstancesOfferingInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The number of Reserved Instances to purchase.
	InstanceCount *int64 `type:"integer" required:"true"`

	// Specified for Reserved Instance Marketplace offerings to limit the total
	// order and ensure that the Reserved Instances are not purchased at unexpected
	// prices.
	LimitPrice *ReservedInstanceLimitPrice `locationName:"limitPrice" type:"structure"`

	// The ID of the Reserved Instance offering to purchase.
	ReservedInstancesOfferingId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for PurchaseReservedInstancesOffering.

func (PurchaseReservedInstancesOfferingInput) GoString added in v0.6.5 

func (s PurchaseReservedInstancesOfferingInput) GoString() string

GoString returns the string representation

func (PurchaseReservedInstancesOfferingInput) String added in v0.6.5 

func (s PurchaseReservedInstancesOfferingInput) String() string

String returns the string representation

func (*PurchaseReservedInstancesOfferingInput) Validate added in v1.1.21 

func (s *PurchaseReservedInstancesOfferingInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PurchaseReservedInstancesOfferingOutput 

type PurchaseReservedInstancesOfferingOutput struct {

	// The IDs of the purchased Reserved Instances.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of PurchaseReservedInstancesOffering.

func (PurchaseReservedInstancesOfferingOutput) GoString added in v0.6.5 

func (s PurchaseReservedInstancesOfferingOutput) GoString() string

GoString returns the string representation

func (PurchaseReservedInstancesOfferingOutput) String added in v0.6.5 

func (s PurchaseReservedInstancesOfferingOutput) String() string

String returns the string representation

type PurchaseScheduledInstancesInput added in v1.0.9 

type PurchaseScheduledInstancesInput struct {

	// Unique, case-sensitive identifier that ensures the idempotency of the request.
	// For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `type:"string" idempotencyToken:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// One or more purchase requests.
	PurchaseRequests []*PurchaseRequest `locationName:"PurchaseRequest" locationNameList:"PurchaseRequest" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for PurchaseScheduledInstances.

func (PurchaseScheduledInstancesInput) GoString added in v1.0.9 

func (s PurchaseScheduledInstancesInput) GoString() string

GoString returns the string representation

func (PurchaseScheduledInstancesInput) String added in v1.0.9 

func (s PurchaseScheduledInstancesInput) String() string

String returns the string representation

func (*PurchaseScheduledInstancesInput) Validate added in v1.1.21 

func (s *PurchaseScheduledInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PurchaseScheduledInstancesOutput added in v1.0.9 

type PurchaseScheduledInstancesOutput struct {

	// Information about the Scheduled Instances.
	ScheduledInstanceSet []*ScheduledInstance `locationName:"scheduledInstanceSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of PurchaseScheduledInstances.

func (PurchaseScheduledInstancesOutput) GoString added in v1.0.9 

func (s PurchaseScheduledInstancesOutput) GoString() string

GoString returns the string representation

func (PurchaseScheduledInstancesOutput) String added in v1.0.9 

func (s PurchaseScheduledInstancesOutput) String() string

String returns the string representation

type RebootInstancesInput 

type RebootInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RebootInstances.

func (RebootInstancesInput) GoString added in v0.6.5 

func (s RebootInstancesInput) GoString() string

GoString returns the string representation

func (RebootInstancesInput) String added in v0.6.5 

func (s RebootInstancesInput) String() string

String returns the string representation

func (*RebootInstancesInput) Validate added in v1.1.21 

func (s *RebootInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RebootInstancesOutput 

type RebootInstancesOutput struct {
	// contains filtered or unexported fields
}

func (RebootInstancesOutput) GoString added in v0.6.5 

func (s RebootInstancesOutput) GoString() string

GoString returns the string representation

func (RebootInstancesOutput) String added in v0.6.5 

func (s RebootInstancesOutput) String() string

String returns the string representation

type RecurringCharge 

type RecurringCharge struct {

	// The amount of the recurring charge.
	Amount *float64 `locationName:"amount" type:"double"`

	// The frequency of the recurring charge.
	Frequency *string `locationName:"frequency" type:"string" enum:"RecurringChargeFrequency"`
	// contains filtered or unexported fields
}

Describes a recurring charge.

func (RecurringCharge) GoString added in v0.6.5 

func (s RecurringCharge) GoString() string

GoString returns the string representation

func (RecurringCharge) String added in v0.6.5 

func (s RecurringCharge) String() string

String returns the string representation

type Region 

type Region struct {

	// The region service endpoint.
	Endpoint *string `locationName:"regionEndpoint" type:"string"`

	// The name of the region.
	RegionName *string `locationName:"regionName" type:"string"`
	// contains filtered or unexported fields
}

Describes a region.

func (Region) GoString added in v0.6.5 

func (s Region) GoString() string

GoString returns the string representation

func (Region) String added in v0.6.5 

func (s Region) String() string

String returns the string representation

type RegisterImageInput 

type RegisterImageInput struct {

	// The architecture of the AMI.
	//
	// Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs,
	// the architecture specified in the manifest file.
	Architecture *string `locationName:"architecture" type:"string" enum:"ArchitectureValues"`

	// One or more block device mapping entries.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"`

	// A description for your AMI.
	Description *string `locationName:"description" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Set to true to enable enhanced networking with ENA for the AMI and any instances
	// that you launch from the AMI.
	//
	// This option is supported only for HVM AMIs. Specifying this option with
	// a PV AMI can make instances launched from the AMI unreachable.
	EnaSupport *bool `locationName:"enaSupport" type:"boolean"`

	// The full path to your AMI manifest in Amazon S3 storage.
	ImageLocation *string `type:"string"`

	// The ID of the kernel.
	KernelId *string `locationName:"kernelId" type:"string"`

	// A name for your AMI.
	//
	// Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets
	// ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('),
	// at-signs (@), or underscores(_)
	Name *string `locationName:"name" type:"string" required:"true"`

	// The ID of the RAM disk.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	// The name of the root device (for example, /dev/sda1, or /dev/xvda).
	RootDeviceName *string `locationName:"rootDeviceName" type:"string"`

	// Set to simple to enable enhanced networking with the Intel 82599 Virtual
	// Function interface for the AMI and any instances that you launch from the
	// AMI.
	//
	// There is no way to disable sriovNetSupport at this time.
	//
	// This option is supported only for HVM AMIs. Specifying this option with
	// a PV AMI can make instances launched from the AMI unreachable.
	SriovNetSupport *string `locationName:"sriovNetSupport" type:"string"`

	// The type of virtualization.
	//
	// Default: paravirtual
	VirtualizationType *string `locationName:"virtualizationType" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for RegisterImage.

func (RegisterImageInput) GoString added in v0.6.5 

func (s RegisterImageInput) GoString() string

GoString returns the string representation

func (RegisterImageInput) String added in v0.6.5 

func (s RegisterImageInput) String() string

String returns the string representation

func (*RegisterImageInput) Validate added in v1.1.21 

func (s *RegisterImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterImageOutput 

type RegisterImageOutput struct {

	// The ID of the newly registered AMI.
	ImageId *string `locationName:"imageId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of RegisterImage.

func (RegisterImageOutput) GoString added in v0.6.5 

func (s RegisterImageOutput) GoString() string

GoString returns the string representation

func (RegisterImageOutput) String added in v0.6.5 

func (s RegisterImageOutput) String() string

String returns the string representation

type RejectVpcPeeringConnectionInput added in v0.9.5 

type RejectVpcPeeringConnectionInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RejectVpcPeeringConnection.

func (RejectVpcPeeringConnectionInput) GoString added in v0.9.5 

func (s RejectVpcPeeringConnectionInput) GoString() string

GoString returns the string representation

func (RejectVpcPeeringConnectionInput) String added in v0.9.5 

func (s RejectVpcPeeringConnectionInput) String() string

String returns the string representation

func (*RejectVpcPeeringConnectionInput) Validate added in v1.1.21 

func (s *RejectVpcPeeringConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RejectVpcPeeringConnectionOutput added in v0.9.5 

type RejectVpcPeeringConnectionOutput struct {

	// Returns true if the request succeeds; otherwise, it returns an error.
	Return *bool `locationName:"return" type:"boolean"`
	// contains filtered or unexported fields
}

Contains the output of RejectVpcPeeringConnection.

func (RejectVpcPeeringConnectionOutput) GoString added in v0.9.5 

func (s RejectVpcPeeringConnectionOutput) GoString() string

GoString returns the string representation

func (RejectVpcPeeringConnectionOutput) String added in v0.9.5 

func (s RejectVpcPeeringConnectionOutput) String() string

String returns the string representation

type ReleaseAddressInput 

type ReleaseAddressInput struct {

	// [EC2-VPC] The allocation ID. Required for EC2-VPC.
	AllocationId *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// [EC2-Classic] The Elastic IP address. Required for EC2-Classic.
	PublicIp *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ReleaseAddress.

func (ReleaseAddressInput) GoString added in v0.6.5 

func (s ReleaseAddressInput) GoString() string

GoString returns the string representation

func (ReleaseAddressInput) String added in v0.6.5 

func (s ReleaseAddressInput) String() string

String returns the string representation

type ReleaseAddressOutput 

type ReleaseAddressOutput struct {
	// contains filtered or unexported fields
}

func (ReleaseAddressOutput) GoString added in v0.6.5 

func (s ReleaseAddressOutput) GoString() string

GoString returns the string representation

func (ReleaseAddressOutput) String added in v0.6.5 

func (s ReleaseAddressOutput) String() string

String returns the string representation

type ReleaseHostsInput added in v1.0.1 

type ReleaseHostsInput struct {

	// The IDs of the Dedicated Hosts you want to release.
	HostIds []*string `locationName:"hostId" locationNameList:"item" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ReleaseHosts.

func (ReleaseHostsInput) GoString added in v1.0.1 

func (s ReleaseHostsInput) GoString() string

GoString returns the string representation

func (ReleaseHostsInput) String added in v1.0.1 

func (s ReleaseHostsInput) String() string

String returns the string representation

func (*ReleaseHostsInput) Validate added in v1.1.21 

func (s *ReleaseHostsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReleaseHostsOutput added in v1.0.1 

type ReleaseHostsOutput struct {

	// The IDs of the Dedicated Hosts that were successfully released.
	Successful []*string `locationName:"successful" locationNameList:"item" type:"list"`

	// The IDs of the Dedicated Hosts that could not be released, including an error
	// message.
	Unsuccessful []*UnsuccessfulItem `locationName:"unsuccessful" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ReleaseHosts.

func (ReleaseHostsOutput) GoString added in v1.0.1 

func (s ReleaseHostsOutput) GoString() string

GoString returns the string representation

func (ReleaseHostsOutput) String added in v1.0.1 

func (s ReleaseHostsOutput) String() string

String returns the string representation

type ReplaceNetworkAclAssociationInput added in v0.9.5 

type ReplaceNetworkAclAssociationInput struct {

	// The ID of the current association between the original network ACL and the
	// subnet.
	AssociationId *string `locationName:"associationId" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the new network ACL to associate with the subnet.
	NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ReplaceNetworkAclAssociation.

func (ReplaceNetworkAclAssociationInput) GoString added in v0.9.5 

func (s ReplaceNetworkAclAssociationInput) GoString() string

GoString returns the string representation

func (ReplaceNetworkAclAssociationInput) String added in v0.9.5 

func (s ReplaceNetworkAclAssociationInput) String() string

String returns the string representation

func (*ReplaceNetworkAclAssociationInput) Validate added in v1.1.21 

func (s *ReplaceNetworkAclAssociationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReplaceNetworkAclAssociationOutput added in v0.9.5 

type ReplaceNetworkAclAssociationOutput struct {

	// The ID of the new association.
	NewAssociationId *string `locationName:"newAssociationId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of ReplaceNetworkAclAssociation.

func (ReplaceNetworkAclAssociationOutput) GoString added in v0.9.5 

func (s ReplaceNetworkAclAssociationOutput) GoString() string

GoString returns the string representation

func (ReplaceNetworkAclAssociationOutput) String added in v0.9.5 

func (s ReplaceNetworkAclAssociationOutput) String() string

String returns the string representation

type ReplaceNetworkAclEntryInput added in v0.9.5 

type ReplaceNetworkAclEntryInput struct {

	// The network range to allow or deny, in CIDR notation.
	CidrBlock *string `locationName:"cidrBlock" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Indicates whether to replace the egress rule.
	//
	// Default: If no value is specified, we replace the ingress rule.
	Egress *bool `locationName:"egress" type:"boolean" required:"true"`

	// ICMP protocol: The ICMP type and code. Required if specifying 1 (ICMP) for
	// the protocol.
	IcmpTypeCode *IcmpTypeCode `locationName:"Icmp" type:"structure"`

	// The ID of the ACL.
	NetworkAclId *string `locationName:"networkAclId" type:"string" required:"true"`

	// TCP or UDP protocols: The range of ports the rule applies to. Required if
	// specifying 6 (TCP) or 17 (UDP) for the protocol.
	PortRange *PortRange `locationName:"portRange" type:"structure"`

	// The IP protocol. You can specify all or -1 to mean all protocols.
	Protocol *string `locationName:"protocol" type:"string" required:"true"`

	// Indicates whether to allow or deny the traffic that matches the rule.
	RuleAction *string `locationName:"ruleAction" type:"string" required:"true" enum:"RuleAction"`

	// The rule number of the entry to replace.
	RuleNumber *int64 `locationName:"ruleNumber" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ReplaceNetworkAclEntry.

func (ReplaceNetworkAclEntryInput) GoString added in v0.9.5 

func (s ReplaceNetworkAclEntryInput) GoString() string

GoString returns the string representation

func (ReplaceNetworkAclEntryInput) String added in v0.9.5 

func (s ReplaceNetworkAclEntryInput) String() string

String returns the string representation

func (*ReplaceNetworkAclEntryInput) Validate added in v1.1.21 

func (s *ReplaceNetworkAclEntryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReplaceNetworkAclEntryOutput added in v0.9.5 

type ReplaceNetworkAclEntryOutput struct {
	// contains filtered or unexported fields
}

func (ReplaceNetworkAclEntryOutput) GoString added in v0.9.5 

func (s ReplaceNetworkAclEntryOutput) GoString() string

GoString returns the string representation

func (ReplaceNetworkAclEntryOutput) String added in v0.9.5 

func (s ReplaceNetworkAclEntryOutput) String() string

String returns the string representation

type ReplaceRouteInput 

type ReplaceRouteInput struct {

	// The CIDR address block used for the destination match. The value you provide
	// must match the CIDR of an existing route in the table.
	DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of an Internet gateway or virtual private gateway.
	GatewayId *string `locationName:"gatewayId" type:"string"`

	// The ID of a NAT instance in your VPC.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The ID of a NAT gateway.
	NatGatewayId *string `locationName:"natGatewayId" type:"string"`

	// The ID of a network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`

	// The ID of a VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ReplaceRoute.

func (ReplaceRouteInput) GoString added in v0.6.5 

func (s ReplaceRouteInput) GoString() string

GoString returns the string representation

func (ReplaceRouteInput) String added in v0.6.5 

func (s ReplaceRouteInput) String() string

String returns the string representation

func (*ReplaceRouteInput) Validate added in v1.1.21 

func (s *ReplaceRouteInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReplaceRouteOutput 

type ReplaceRouteOutput struct {
	// contains filtered or unexported fields
}

func (ReplaceRouteOutput) GoString added in v0.6.5 

func (s ReplaceRouteOutput) GoString() string

GoString returns the string representation

func (ReplaceRouteOutput) String added in v0.6.5 

func (s ReplaceRouteOutput) String() string

String returns the string representation

type ReplaceRouteTableAssociationInput 

type ReplaceRouteTableAssociationInput struct {

	// The association ID.
	AssociationId *string `locationName:"associationId" type:"string" required:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the new route table to associate with the subnet.
	RouteTableId *string `locationName:"routeTableId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ReplaceRouteTableAssociation.

func (ReplaceRouteTableAssociationInput) GoString added in v0.6.5 

func (s ReplaceRouteTableAssociationInput) GoString() string

GoString returns the string representation

func (ReplaceRouteTableAssociationInput) String added in v0.6.5 

func (s ReplaceRouteTableAssociationInput) String() string

String returns the string representation

func (*ReplaceRouteTableAssociationInput) Validate added in v1.1.21 

func (s *ReplaceRouteTableAssociationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReplaceRouteTableAssociationOutput 

type ReplaceRouteTableAssociationOutput struct {

	// The ID of the new association.
	NewAssociationId *string `locationName:"newAssociationId" type:"string"`
	// contains filtered or unexported fields
}

Contains the output of ReplaceRouteTableAssociation.

func (ReplaceRouteTableAssociationOutput) GoString added in v0.6.5 

func (s ReplaceRouteTableAssociationOutput) GoString() string

GoString returns the string representation

func (ReplaceRouteTableAssociationOutput) String added in v0.6.5 

func (s ReplaceRouteTableAssociationOutput) String() string

String returns the string representation

type ReportInstanceStatusInput 

type ReportInstanceStatusInput struct {

	// Descriptive text about the health state of your instance.
	Description *string `locationName:"description" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The time at which the reported instance health state ended.
	EndTime *time.Time `locationName:"endTime" type:"timestamp" timestampFormat:"iso8601"`

	// One or more instances.
	Instances []*string `locationName:"instanceId" locationNameList:"InstanceId" type:"list" required:"true"`

	// One or more reason codes that describes the health state of your instance.
	//
	//    instance-stuck-in-state: My instance is stuck in a state.
	//
	//    unresponsive: My instance is unresponsive.
	//
	//    not-accepting-credentials: My instance is not accepting my credentials.
	//
	//    password-not-available: A password is not available for my instance.
	//
	//    performance-network: My instance is experiencing performance problems
	// which I believe are network related.
	//
	//    performance-instance-store: My instance is experiencing performance problems
	// which I believe are related to the instance stores.
	//
	//    performance-ebs-volume: My instance is experiencing performance problems
	// which I believe are related to an EBS volume.
	//
	//    performance-other: My instance is experiencing performance problems.
	//
	//    other: [explain using the description parameter]
	ReasonCodes []*string `locationName:"reasonCode" locationNameList:"item" type:"list" required:"true"`

	// The time at which the reported instance health state began.
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"`

	// The status of all instances listed.
	Status *string `locationName:"status" type:"string" required:"true" enum:"ReportStatusType"`
	// contains filtered or unexported fields
}

Contains the parameters for ReportInstanceStatus.

func (ReportInstanceStatusInput) GoString added in v0.6.5 

func (s ReportInstanceStatusInput) GoString() string

GoString returns the string representation

func (ReportInstanceStatusInput) String added in v0.6.5 

func (s ReportInstanceStatusInput) String() string

String returns the string representation

func (*ReportInstanceStatusInput) Validate added in v1.1.21 

func (s *ReportInstanceStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ReportInstanceStatusOutput 

type ReportInstanceStatusOutput struct {
	// contains filtered or unexported fields
}

func (ReportInstanceStatusOutput) GoString added in v0.6.5 

func (s ReportInstanceStatusOutput) GoString() string

GoString returns the string representation

func (ReportInstanceStatusOutput) String added in v0.6.5 

func (s ReportInstanceStatusOutput) String() string

String returns the string representation

type RequestSpotFleetInput 

type RequestSpotFleetInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The configuration for the Spot fleet request.
	SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RequestSpotFleet.

func (RequestSpotFleetInput) GoString added in v0.6.5 

func (s RequestSpotFleetInput) GoString() string

GoString returns the string representation

func (RequestSpotFleetInput) String added in v0.6.5 

func (s RequestSpotFleetInput) String() string

String returns the string representation

func (*RequestSpotFleetInput) Validate added in v1.1.21 

func (s *RequestSpotFleetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RequestSpotFleetOutput 

type RequestSpotFleetOutput struct {

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the output of RequestSpotFleet.

func (RequestSpotFleetOutput) GoString added in v0.6.5 

func (s RequestSpotFleetOutput) GoString() string

GoString returns the string representation

func (RequestSpotFleetOutput) String added in v0.6.5 

func (s RequestSpotFleetOutput) String() string

String returns the string representation

type RequestSpotInstancesInput 

type RequestSpotInstancesInput struct {

	// The user-specified name for a logical grouping of bids.
	//
	// When you specify an Availability Zone group in a Spot Instance request,
	// all Spot instances in the request are launched in the same Availability Zone.
	// Instance proximity is maintained with this parameter, but the choice of Availability
	// Zone is not. The group applies only to bids for Spot Instances of the same
	// instance type. Any additional Spot instance requests that are specified with
	// the same Availability Zone group name are launched in that same Availability
	// Zone, as long as at least one instance from the group is still active.
	//
	// If there is no active instance running in the Availability Zone group that
	// you specify for a new Spot instance request (all instances are terminated,
	// the bid is expired, or the bid falls below current market), then Amazon EC2
	// launches the instance in any Availability Zone where the constraint can be
	// met. Consequently, the subsequent set of Spot instances could be placed in
	// a different zone from the original request, even if you specified the same
	// Availability Zone group.
	//
	// Default: Instances are launched in any available Availability Zone.
	AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"`

	// The required duration for the Spot instances (also known as Spot blocks),
	// in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300,
	// or 360).
	//
	// The duration period starts as soon as your Spot instance receives its instance
	// ID. At the end of the duration period, Amazon EC2 marks the Spot instance
	// for termination and provides a Spot instance termination notice, which gives
	// the instance a two-minute warning before it terminates.
	//
	// Note that you can't specify an Availability Zone group or a launch group
	// if you specify a duration.
	BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"`

	// Unique, case-sensitive identifier that you provide to ensure the idempotency
	// of the request. For more information, see How to Ensure Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Run_Instance_Idempotency.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The maximum number of Spot instances to launch.
	//
	// Default: 1
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The instance launch group. Launch groups are Spot instances that launch together
	// and terminate together.
	//
	// Default: Instances are launched and terminated individually
	LaunchGroup *string `locationName:"launchGroup" type:"string"`

	// Describes the launch specification for an instance.
	LaunchSpecification *RequestSpotLaunchSpecification `type:"structure"`

	// The maximum hourly price (bid) for any Spot instance launched to fulfill
	// the request.
	SpotPrice *string `locationName:"spotPrice" type:"string" required:"true"`

	// The Spot instance request type.
	//
	// Default: one-time
	Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"`

	// The start date of the request. If this is a one-time request, the request
	// becomes active at this date and time and remains active until all instances
	// launch, the request expires, or the request is canceled. If the request is
	// persistent, the request becomes active at this date and time and remains
	// active until it expires or is canceled.
	//
	// Default: The request is effective indefinitely.
	ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"`

	// The end date of the request. If this is a one-time request, the request remains
	// active until all instances launch, the request is canceled, or this date
	// is reached. If the request is persistent, it remains active until it is canceled
	// or this date and time is reached.
	//
	// Default: The request is effective indefinitely.
	ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Contains the parameters for RequestSpotInstances.

func (RequestSpotInstancesInput) GoString added in v0.6.5 

func (s RequestSpotInstancesInput) GoString() string

GoString returns the string representation

func (RequestSpotInstancesInput) String added in v0.6.5 

func (s RequestSpotInstancesInput) String() string

String returns the string representation

func (*RequestSpotInstancesInput) Validate added in v1.1.21 

func (s *RequestSpotInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RequestSpotInstancesOutput 

type RequestSpotInstancesOutput struct {

	// One or more Spot instance requests.
	SpotInstanceRequests []*SpotInstanceRequest `locationName:"spotInstanceRequestSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of RequestSpotInstances.

func (RequestSpotInstancesOutput) GoString added in v0.6.5 

func (s RequestSpotInstancesOutput) GoString() string

GoString returns the string representation

func (RequestSpotInstancesOutput) String added in v0.6.5 

func (s RequestSpotInstancesOutput) String() string

String returns the string representation

type RequestSpotLaunchSpecification 

type RequestSpotLaunchSpecification struct {

	// Deprecated.
	AddressingType *string `locationName:"addressingType" type:"string"`

	// One or more block device mapping entries.
	//
	// Although you can specify encrypted EBS volumes in this block device mapping
	// for your Spot Instances, these volumes are not encrypted.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// Indicates whether the instance is optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS
	// Optimized instance.
	//
	// Default: false
	EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"`

	// The IAM instance profile.
	IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"`

	// The ID of the AMI.
	ImageId *string `locationName:"imageId" type:"string"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The ID of the kernel.
	KernelId *string `locationName:"kernelId" type:"string"`

	// The name of the key pair.
	KeyName *string `locationName:"keyName" type:"string"`

	// Describes the monitoring for the instance.
	Monitoring *RunInstancesMonitoringEnabled `locationName:"monitoring" type:"structure"`

	// One or more network interfaces.
	NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"NetworkInterface" locationNameList:"item" type:"list"`

	// The placement information for the instance.
	Placement *SpotPlacement `locationName:"placement" type:"structure"`

	// The ID of the RAM disk.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"item" type:"list"`

	SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"item" type:"list"`

	// The ID of the subnet in which to launch the instance.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The user data to make available to the instances. If you are using an AWS
	// SDK or command line tool, Base64-encoding is performed for you, and you can
	// load the text from a file. Otherwise, you must provide Base64-encoded text.
	UserData *string `locationName:"userData" type:"string"`
	// contains filtered or unexported fields
}

Describes the launch specification for an instance.

func (RequestSpotLaunchSpecification) GoString added in v0.6.5 

func (s RequestSpotLaunchSpecification) GoString() string

GoString returns the string representation

func (RequestSpotLaunchSpecification) String added in v0.6.5 

func (s RequestSpotLaunchSpecification) String() string

String returns the string representation

func (*RequestSpotLaunchSpecification) Validate added in v1.1.21 

func (s *RequestSpotLaunchSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Reservation 

type Reservation struct {

	// [EC2-Classic only] One or more security groups.
	Groups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// One or more instances.
	Instances []*Instance `locationName:"instancesSet" locationNameList:"item" type:"list"`

	// The ID of the AWS account that owns the reservation.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The ID of the requester that launched the instances on your behalf (for example,
	// AWS Management Console or Auto Scaling).
	RequesterId *string `locationName:"requesterId" type:"string"`

	// The ID of the reservation.
	ReservationId *string `locationName:"reservationId" type:"string"`
	// contains filtered or unexported fields
}

Describes a reservation.

func (Reservation) GoString added in v0.6.5 

func (s Reservation) GoString() string

GoString returns the string representation

func (Reservation) String added in v0.6.5 

func (s Reservation) String() string

String returns the string representation

type ReservationValue added in v1.4.15 

type ReservationValue struct {

	// The hourly rate of the reservation.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The balance of the total value (the sum of remainingUpfrontValue + hourlyPrice
	// * number of hours remaining).
	RemainingTotalValue *string `locationName:"remainingTotalValue" type:"string"`

	// The remaining upfront cost of the reservation.
	RemainingUpfrontValue *string `locationName:"remainingUpfrontValue" type:"string"`
	// contains filtered or unexported fields
}

The cost associated with the Reserved Instance.

func (ReservationValue) GoString added in v1.4.15 

func (s ReservationValue) GoString() string

GoString returns the string representation

func (ReservationValue) String added in v1.4.15 

func (s ReservationValue) String() string

String returns the string representation

type ReservedInstanceLimitPrice 

type ReservedInstanceLimitPrice struct {

	// Used for Reserved Instance Marketplace offerings. Specifies the limit price
	// on the total order (instanceCount * price).
	Amount *float64 `locationName:"amount" type:"double"`

	// The currency in which the limitPrice amount is specified. At this time, the
	// only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`
	// contains filtered or unexported fields
}

Describes the limit price of a Reserved Instance offering.

func (ReservedInstanceLimitPrice) GoString added in v0.6.5 

func (s ReservedInstanceLimitPrice) GoString() string

GoString returns the string representation

func (ReservedInstanceLimitPrice) String added in v0.6.5 

func (s ReservedInstanceLimitPrice) String() string

String returns the string representation

type ReservedInstanceReservationValue added in v1.4.15 

type ReservedInstanceReservationValue struct {

	// The total value of the Convertible Reserved Instance that you are exchanging.
	ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"`

	// The ID of the Convertible Reserved Instance that you are exchanging.
	ReservedInstanceId *string `locationName:"reservedInstanceId" type:"string"`
	// contains filtered or unexported fields
}

The total value of the Convertible Reserved Instance.

func (ReservedInstanceReservationValue) GoString added in v1.4.15 

func (s ReservedInstanceReservationValue) GoString() string

GoString returns the string representation

func (ReservedInstanceReservationValue) String added in v1.4.15 

func (s ReservedInstanceReservationValue) String() string

String returns the string representation

type ReservedInstances 

type ReservedInstances struct {

	// The Availability Zone in which the Reserved Instance can be used.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The currency of the Reserved Instance. It's specified using ISO 4217 standard
	// currency codes. At this time, the only supported currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The duration of the Reserved Instance, in seconds.
	Duration *int64 `locationName:"duration" type:"long"`

	// The time when the Reserved Instance expires.
	End *time.Time `locationName:"end" type:"timestamp" timestampFormat:"iso8601"`

	// The purchase price of the Reserved Instance.
	FixedPrice *float64 `locationName:"fixedPrice" type:"float"`

	// The number of reservations purchased.
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The tenancy of the instance.
	InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"`

	// The instance type on which the Reserved Instance can be used.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The offering class of the Reserved Instance.
	OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"`

	// The Reserved Instance offering type.
	OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"`

	// The Reserved Instance product platform description.
	ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"`

	// The recurring charge tag assigned to the resource.
	RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"`

	// The ID of the Reserved Instance.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`

	// The scope of the Reserved Instance.
	Scope *string `locationName:"scope" type:"string" enum:"scope"`

	// The date and time the Reserved Instance started.
	Start *time.Time `locationName:"start" type:"timestamp" timestampFormat:"iso8601"`

	// The state of the Reserved Instance purchase.
	State *string `locationName:"state" type:"string" enum:"ReservedInstanceState"`

	// Any tags assigned to the resource.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The usage price of the Reserved Instance, per hour.
	UsagePrice *float64 `locationName:"usagePrice" type:"float"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance.

func (ReservedInstances) GoString added in v0.6.5 

func (s ReservedInstances) GoString() string

GoString returns the string representation

func (ReservedInstances) String added in v0.6.5 

func (s ReservedInstances) String() string

String returns the string representation

type ReservedInstancesConfiguration 

type ReservedInstancesConfiguration struct {

	// The Availability Zone for the modified Reserved Instances.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The number of modified Reserved Instances.
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The instance type for the modified Reserved Instances.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The network platform of the modified Reserved Instances, which is either
	// EC2-Classic or EC2-VPC.
	Platform *string `locationName:"platform" type:"string"`

	// Whether the Reserved Instance is standard or convertible.
	Scope *string `locationName:"scope" type:"string" enum:"scope"`
	// contains filtered or unexported fields
}

Describes the configuration settings for the modified Reserved Instances.

func (ReservedInstancesConfiguration) GoString added in v0.6.5 

func (s ReservedInstancesConfiguration) GoString() string

GoString returns the string representation

func (ReservedInstancesConfiguration) String added in v0.6.5 

func (s ReservedInstancesConfiguration) String() string

String returns the string representation

type ReservedInstancesId added in v0.9.5 

type ReservedInstancesId struct {

	// The ID of the Reserved Instance.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`
	// contains filtered or unexported fields
}

Describes the ID of a Reserved Instance.

func (ReservedInstancesId) GoString added in v0.9.5 

func (s ReservedInstancesId) GoString() string

GoString returns the string representation

func (ReservedInstancesId) String added in v0.9.5 

func (s ReservedInstancesId) String() string

String returns the string representation

type ReservedInstancesListing 

type ReservedInstancesListing struct {

	// A unique, case-sensitive key supplied by the client to ensure that the request
	// is idempotent. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The time the listing was created.
	CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"`

	// The number of instances in this state.
	InstanceCounts []*InstanceCount `locationName:"instanceCounts" locationNameList:"item" type:"list"`

	// The price of the Reserved Instance listing.
	PriceSchedules []*PriceSchedule `locationName:"priceSchedules" locationNameList:"item" type:"list"`

	// The ID of the Reserved Instance.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`

	// The ID of the Reserved Instance listing.
	ReservedInstancesListingId *string `locationName:"reservedInstancesListingId" type:"string"`

	// The status of the Reserved Instance listing.
	Status *string `locationName:"status" type:"string" enum:"ListingStatus"`

	// The reason for the current status of the Reserved Instance listing. The response
	// can be blank.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// Any tags assigned to the resource.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The last modified timestamp of the listing.
	UpdateDate *time.Time `locationName:"updateDate" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance listing.

func (ReservedInstancesListing) GoString added in v0.6.5 

func (s ReservedInstancesListing) GoString() string

GoString returns the string representation

func (ReservedInstancesListing) String added in v0.6.5 

func (s ReservedInstancesListing) String() string

String returns the string representation

type ReservedInstancesModification 

type ReservedInstancesModification struct {

	// A unique, case-sensitive key supplied by the client to ensure that the request
	// is idempotent. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `locationName:"clientToken" type:"string"`

	// The time when the modification request was created.
	CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"`

	// The time for the modification to become effective.
	EffectiveDate *time.Time `locationName:"effectiveDate" type:"timestamp" timestampFormat:"iso8601"`

	// Contains target configurations along with their corresponding new Reserved
	// Instance IDs.
	ModificationResults []*ReservedInstancesModificationResult `locationName:"modificationResultSet" locationNameList:"item" type:"list"`

	// The IDs of one or more Reserved Instances.
	ReservedInstancesIds []*ReservedInstancesId `locationName:"reservedInstancesSet" locationNameList:"item" type:"list"`

	// A unique ID for the Reserved Instance modification.
	ReservedInstancesModificationId *string `locationName:"reservedInstancesModificationId" type:"string"`

	// The status of the Reserved Instances modification request.
	Status *string `locationName:"status" type:"string"`

	// The reason for the status.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// The time when the modification request was last updated.
	UpdateDate *time.Time `locationName:"updateDate" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance modification.

func (ReservedInstancesModification) GoString added in v0.6.5 

func (s ReservedInstancesModification) GoString() string

GoString returns the string representation

func (ReservedInstancesModification) String added in v0.6.5 

func (s ReservedInstancesModification) String() string

String returns the string representation

type ReservedInstancesModificationResult 

type ReservedInstancesModificationResult struct {

	// The ID for the Reserved Instances that were created as part of the modification
	// request. This field is only available when the modification is fulfilled.
	ReservedInstancesId *string `locationName:"reservedInstancesId" type:"string"`

	// The target Reserved Instances configurations supplied as part of the modification
	// request.
	TargetConfiguration *ReservedInstancesConfiguration `locationName:"targetConfiguration" type:"structure"`
	// contains filtered or unexported fields
}

Describes the modification request/s.

func (ReservedInstancesModificationResult) GoString added in v0.6.5 

func (s ReservedInstancesModificationResult) GoString() string

GoString returns the string representation

func (ReservedInstancesModificationResult) String added in v0.6.5 

func (s ReservedInstancesModificationResult) String() string

String returns the string representation

type ReservedInstancesOffering 

type ReservedInstancesOffering struct {

	// The Availability Zone in which the Reserved Instance can be used.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The currency of the Reserved Instance offering you are purchasing. It's specified
	// using ISO 4217 standard currency codes. At this time, the only supported
	// currency is USD.
	CurrencyCode *string `locationName:"currencyCode" type:"string" enum:"CurrencyCodeValues"`

	// The duration of the Reserved Instance, in seconds.
	Duration *int64 `locationName:"duration" type:"long"`

	// The purchase price of the Reserved Instance.
	FixedPrice *float64 `locationName:"fixedPrice" type:"float"`

	// The tenancy of the instance.
	InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"`

	// The instance type on which the Reserved Instance can be used.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// Indicates whether the offering is available through the Reserved Instance
	// Marketplace (resale) or AWS. If it's a Reserved Instance Marketplace offering,
	// this is true.
	Marketplace *bool `locationName:"marketplace" type:"boolean"`

	// If convertible it can be exchanged for Reserved Instances of the same or
	// higher monetary value, with different configurations. If standard, it is
	// not possible to perform an exchange.
	OfferingClass *string `locationName:"offeringClass" type:"string" enum:"OfferingClassType"`

	// The Reserved Instance offering type.
	OfferingType *string `locationName:"offeringType" type:"string" enum:"OfferingTypeValues"`

	// The pricing details of the Reserved Instance offering.
	PricingDetails []*PricingDetail `locationName:"pricingDetailsSet" locationNameList:"item" type:"list"`

	// The Reserved Instance product platform description.
	ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"`

	// The recurring charge tag assigned to the resource.
	RecurringCharges []*RecurringCharge `locationName:"recurringCharges" locationNameList:"item" type:"list"`

	// The ID of the Reserved Instance offering. This is the offering ID used in
	// GetReservedInstancesExchangeQuote to confirm that an exchange can be made.
	ReservedInstancesOfferingId *string `locationName:"reservedInstancesOfferingId" type:"string"`

	// Whether the Reserved Instance is applied to instances in a region or an Availability
	// Zone.
	Scope *string `locationName:"scope" type:"string" enum:"scope"`

	// The usage price of the Reserved Instance, per hour.
	UsagePrice *float64 `locationName:"usagePrice" type:"float"`
	// contains filtered or unexported fields
}

Describes a Reserved Instance offering.

func (ReservedInstancesOffering) GoString added in v0.6.5 

func (s ReservedInstancesOffering) GoString() string

GoString returns the string representation

func (ReservedInstancesOffering) String added in v0.6.5 

func (s ReservedInstancesOffering) String() string

String returns the string representation

type ResetImageAttributeInput 

type ResetImageAttributeInput struct {

	// The attribute to reset (currently you can only reset the launch permission
	// attribute).
	Attribute *string `type:"string" required:"true" enum:"ResetImageAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the AMI.
	ImageId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ResetImageAttribute.

func (ResetImageAttributeInput) GoString added in v0.6.5 

func (s ResetImageAttributeInput) GoString() string

GoString returns the string representation

func (ResetImageAttributeInput) String added in v0.6.5 

func (s ResetImageAttributeInput) String() string

String returns the string representation

func (*ResetImageAttributeInput) Validate added in v1.1.21 

func (s *ResetImageAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResetImageAttributeOutput 

type ResetImageAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ResetImageAttributeOutput) GoString added in v0.6.5 

func (s ResetImageAttributeOutput) GoString() string

GoString returns the string representation

func (ResetImageAttributeOutput) String added in v0.6.5 

func (s ResetImageAttributeOutput) String() string

String returns the string representation

type ResetInstanceAttributeInput 

type ResetInstanceAttributeInput struct {

	// The attribute to reset.
	//
	//  You can only reset the following attributes: kernel | ramdisk | sourceDestCheck.
	// To change an instance attribute, use ModifyInstanceAttribute.
	Attribute *string `locationName:"attribute" type:"string" required:"true" enum:"InstanceAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ResetInstanceAttribute.

func (ResetInstanceAttributeInput) GoString added in v0.6.5 

func (s ResetInstanceAttributeInput) GoString() string

GoString returns the string representation

func (ResetInstanceAttributeInput) String added in v0.6.5 

func (s ResetInstanceAttributeInput) String() string

String returns the string representation

func (*ResetInstanceAttributeInput) Validate added in v1.1.21 

func (s *ResetInstanceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResetInstanceAttributeOutput 

type ResetInstanceAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ResetInstanceAttributeOutput) GoString added in v0.6.5 

func (s ResetInstanceAttributeOutput) GoString() string

GoString returns the string representation

func (ResetInstanceAttributeOutput) String added in v0.6.5 

func (s ResetInstanceAttributeOutput) String() string

String returns the string representation

type ResetNetworkInterfaceAttributeInput 

type ResetNetworkInterfaceAttributeInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`

	// The source/destination checking attribute. Resets the value to true.
	SourceDestCheck *string `locationName:"sourceDestCheck" type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ResetNetworkInterfaceAttribute.

func (ResetNetworkInterfaceAttributeInput) GoString added in v0.6.5 

func (s ResetNetworkInterfaceAttributeInput) GoString() string

GoString returns the string representation

func (ResetNetworkInterfaceAttributeInput) String added in v0.6.5 

func (s ResetNetworkInterfaceAttributeInput) String() string

String returns the string representation

func (*ResetNetworkInterfaceAttributeInput) Validate added in v1.1.21 

func (s *ResetNetworkInterfaceAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResetNetworkInterfaceAttributeOutput 

type ResetNetworkInterfaceAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ResetNetworkInterfaceAttributeOutput) GoString added in v0.6.5 

func (s ResetNetworkInterfaceAttributeOutput) GoString() string

GoString returns the string representation

func (ResetNetworkInterfaceAttributeOutput) String added in v0.6.5 

func (s ResetNetworkInterfaceAttributeOutput) String() string

String returns the string representation

type ResetSnapshotAttributeInput 

type ResetSnapshotAttributeInput struct {

	// The attribute to reset. Currently, only the attribute for permission to create
	// volumes can be reset.
	Attribute *string `type:"string" required:"true" enum:"SnapshotAttributeName"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The ID of the snapshot.
	SnapshotId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ResetSnapshotAttribute.

func (ResetSnapshotAttributeInput) GoString added in v0.6.5 

func (s ResetSnapshotAttributeInput) GoString() string

GoString returns the string representation

func (ResetSnapshotAttributeInput) String added in v0.6.5 

func (s ResetSnapshotAttributeInput) String() string

String returns the string representation

func (*ResetSnapshotAttributeInput) Validate added in v1.1.21 

func (s *ResetSnapshotAttributeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResetSnapshotAttributeOutput 

type ResetSnapshotAttributeOutput struct {
	// contains filtered or unexported fields
}

func (ResetSnapshotAttributeOutput) GoString added in v0.6.5 

func (s ResetSnapshotAttributeOutput) GoString() string

GoString returns the string representation

func (ResetSnapshotAttributeOutput) String added in v0.6.5 

func (s ResetSnapshotAttributeOutput) String() string

String returns the string representation

type RestoreAddressToClassicInput 

type RestoreAddressToClassicInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RestoreAddressToClassic.

func (RestoreAddressToClassicInput) GoString added in v0.6.5 

func (s RestoreAddressToClassicInput) GoString() string

GoString returns the string representation

func (RestoreAddressToClassicInput) String added in v0.6.5 

func (s RestoreAddressToClassicInput) String() string

String returns the string representation

func (*RestoreAddressToClassicInput) Validate added in v1.1.21 

func (s *RestoreAddressToClassicInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RestoreAddressToClassicOutput 

type RestoreAddressToClassicOutput struct {

	// The Elastic IP address.
	PublicIp *string `locationName:"publicIp" type:"string"`

	// The move status for the IP address.
	Status *string `locationName:"status" type:"string" enum:"Status"`
	// contains filtered or unexported fields
}

Contains the output of RestoreAddressToClassic.

func (RestoreAddressToClassicOutput) GoString added in v0.6.5 

func (s RestoreAddressToClassicOutput) GoString() string

GoString returns the string representation

func (RestoreAddressToClassicOutput) String added in v0.6.5 

func (s RestoreAddressToClassicOutput) String() string

String returns the string representation

type RevokeSecurityGroupEgressInput 

type RevokeSecurityGroupEgressInput struct {

	// The CIDR IP address range. We recommend that you specify the CIDR range in
	// a set of IP permissions instead.
	CidrIp *string `locationName:"cidrIp" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The start of port range for the TCP and UDP protocols, or an ICMP type number.
	// We recommend that you specify the port range in a set of IP permissions instead.
	FromPort *int64 `locationName:"fromPort" type:"integer"`

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string" required:"true"`

	// A set of IP permissions. You can't specify a destination security group and
	// a CIDR IP address range.
	IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"`

	// The IP protocol name or number. We recommend that you specify the protocol
	// in a set of IP permissions instead.
	IpProtocol *string `locationName:"ipProtocol" type:"string"`

	// The name of a destination security group. To revoke outbound access to a
	// destination security group, we recommend that you use a set of IP permissions
	// instead.
	SourceSecurityGroupName *string `locationName:"sourceSecurityGroupName" type:"string"`

	// The AWS account number for a destination security group. To revoke outbound
	// access to a destination security group, we recommend that you use a set of
	// IP permissions instead.
	SourceSecurityGroupOwnerId *string `locationName:"sourceSecurityGroupOwnerId" type:"string"`

	// The end of port range for the TCP and UDP protocols, or an ICMP type number.
	// We recommend that you specify the port range in a set of IP permissions instead.
	ToPort *int64 `locationName:"toPort" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for RevokeSecurityGroupEgress.

func (RevokeSecurityGroupEgressInput) GoString added in v0.6.5 

func (s RevokeSecurityGroupEgressInput) GoString() string

GoString returns the string representation

func (RevokeSecurityGroupEgressInput) String added in v0.6.5 

func (s RevokeSecurityGroupEgressInput) String() string

String returns the string representation

func (*RevokeSecurityGroupEgressInput) Validate added in v1.1.21 

func (s *RevokeSecurityGroupEgressInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RevokeSecurityGroupEgressOutput 

type RevokeSecurityGroupEgressOutput struct {
	// contains filtered or unexported fields
}

func (RevokeSecurityGroupEgressOutput) GoString added in v0.6.5 

func (s RevokeSecurityGroupEgressOutput) GoString() string

GoString returns the string representation

func (RevokeSecurityGroupEgressOutput) String added in v0.6.5 

func (s RevokeSecurityGroupEgressOutput) String() string

String returns the string representation

type RevokeSecurityGroupIngressInput 

type RevokeSecurityGroupIngressInput struct {

	// The CIDR IP address range. You can't specify this parameter when specifying
	// a source security group.
	CidrIp *string `type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// The start of port range for the TCP and UDP protocols, or an ICMP type number.
	// For the ICMP type number, use -1 to specify all ICMP types.
	FromPort *int64 `type:"integer"`

	// The ID of the security group. Required for a security group in a nondefault
	// VPC.
	GroupId *string `type:"string"`

	// [EC2-Classic, default VPC] The name of the security group.
	GroupName *string `type:"string"`

	// A set of IP permissions. You can't specify a source security group and a
	// CIDR IP address range.
	IpPermissions []*IpPermission `locationNameList:"item" type:"list"`

	// The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml)).
	// Use -1 to specify all.
	IpProtocol *string `type:"string"`

	// [EC2-Classic, default VPC] The name of the source security group. You can't
	// specify this parameter in combination with the following parameters: the
	// CIDR IP address range, the start of the port range, the IP protocol, and
	// the end of the port range. For EC2-VPC, the source security group must be
	// in the same VPC. To revoke a specific rule for an IP protocol and port range,
	// use a set of IP permissions instead.
	SourceSecurityGroupName *string `type:"string"`

	// [EC2-Classic] The AWS account ID of the source security group, if the source
	// security group is in a different account. You can't specify this parameter
	// in combination with the following parameters: the CIDR IP address range,
	// the IP protocol, the start of the port range, and the end of the port range.
	// To revoke a specific rule for an IP protocol and port range, use a set of
	// IP permissions instead.
	SourceSecurityGroupOwnerId *string `type:"string"`

	// The end of port range for the TCP and UDP protocols, or an ICMP code number.
	// For the ICMP code number, use -1 to specify all ICMP codes for the ICMP type.
	ToPort *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for RevokeSecurityGroupIngress.

func (RevokeSecurityGroupIngressInput) GoString added in v0.6.5 

func (s RevokeSecurityGroupIngressInput) GoString() string

GoString returns the string representation

func (RevokeSecurityGroupIngressInput) String added in v0.6.5 

func (s RevokeSecurityGroupIngressInput) String() string

String returns the string representation

type RevokeSecurityGroupIngressOutput 

type RevokeSecurityGroupIngressOutput struct {
	// contains filtered or unexported fields
}

func (RevokeSecurityGroupIngressOutput) GoString added in v0.6.5 

func (s RevokeSecurityGroupIngressOutput) GoString() string

GoString returns the string representation

func (RevokeSecurityGroupIngressOutput) String added in v0.6.5 

func (s RevokeSecurityGroupIngressOutput) String() string

String returns the string representation

type Route 

type Route struct {

	// The CIDR block used for the destination match.
	DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"`

	// The prefix of the AWS service.
	DestinationPrefixListId *string `locationName:"destinationPrefixListId" type:"string"`

	// The ID of a gateway attached to your VPC.
	GatewayId *string `locationName:"gatewayId" type:"string"`

	// The ID of a NAT instance in your VPC.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The AWS account ID of the owner of the instance.
	InstanceOwnerId *string `locationName:"instanceOwnerId" type:"string"`

	// The ID of a NAT gateway.
	NatGatewayId *string `locationName:"natGatewayId" type:"string"`

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string"`

	// Describes how the route was created.
	//
	//    CreateRouteTable - The route was automatically created when the route
	// table was created.
	//
	//    CreateRoute - The route was manually added to the route table.
	//
	//    EnableVgwRoutePropagation - The route was propagated by route propagation.
	Origin *string `locationName:"origin" type:"string" enum:"RouteOrigin"`

	// The state of the route. The blackhole state indicates that the route's target
	// isn't available (for example, the specified gateway isn't attached to the
	// VPC, or the specified NAT instance has been terminated).
	State *string `locationName:"state" type:"string" enum:"RouteState"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Describes a route in a route table.

func (Route) GoString added in v0.6.5 

func (s Route) GoString() string

GoString returns the string representation

func (Route) String added in v0.6.5 

func (s Route) String() string

String returns the string representation

type RouteTable 

type RouteTable struct {

	// The associations between the route table and one or more subnets.
	Associations []*RouteTableAssociation `locationName:"associationSet" locationNameList:"item" type:"list"`

	// Any virtual private gateway (VGW) propagating routes.
	PropagatingVgws []*PropagatingVgw `locationName:"propagatingVgwSet" locationNameList:"item" type:"list"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string"`

	// The routes in the route table.
	Routes []*Route `locationName:"routeSet" locationNameList:"item" type:"list"`

	// Any tags assigned to the route table.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a route table.

func (RouteTable) GoString added in v0.6.5 

func (s RouteTable) GoString() string

GoString returns the string representation

func (RouteTable) String added in v0.6.5 

func (s RouteTable) String() string

String returns the string representation

type RouteTableAssociation 

type RouteTableAssociation struct {

	// Indicates whether this is the main route table.
	Main *bool `locationName:"main" type:"boolean"`

	// The ID of the association between a route table and a subnet.
	RouteTableAssociationId *string `locationName:"routeTableAssociationId" type:"string"`

	// The ID of the route table.
	RouteTableId *string `locationName:"routeTableId" type:"string"`

	// The ID of the subnet. A subnet ID is not returned for an implicit association.
	SubnetId *string `locationName:"subnetId" type:"string"`
	// contains filtered or unexported fields
}

Describes an association between a route table and a subnet.

func (RouteTableAssociation) GoString added in v0.6.5 

func (s RouteTableAssociation) GoString() string

GoString returns the string representation

func (RouteTableAssociation) String added in v0.6.5 

func (s RouteTableAssociation) String() string

String returns the string representation

type RunInstancesInput 

type RunInstancesInput struct {

	// Reserved.
	AdditionalInfo *string `locationName:"additionalInfo" type:"string"`

	// The block device mapping.
	//
	//  Supplying both a snapshot ID and an encryption value as arguments for block-device
	// mapping results in an error. This is because only blank volumes can be encrypted
	// on start, and these are not created from a snapshot. If a snapshot is the
	// basis for the volume, it contains data by definition and its encryption status
	// cannot be changed using this action.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"`

	// Unique, case-sensitive identifier you provide to ensure the idempotency of
	// the request. For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	//
	// Constraints: Maximum 64 ASCII characters
	ClientToken *string `locationName:"clientToken" type:"string"`

	// If you set this parameter to true, you can't terminate the instance using
	// the Amazon EC2 console, CLI, or API; otherwise, you can. If you set this
	// parameter to true and then later want to be able to terminate the instance,
	// you must first change the value of the disableApiTermination attribute to
	// false using ModifyInstanceAttribute. Alternatively, if you set InstanceInitiatedShutdownBehavior
	// to terminate, you can terminate the instance by running the shutdown command
	// from the instance.
	//
	// Default: false
	DisableApiTermination *bool `locationName:"disableApiTermination" type:"boolean"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Indicates whether the instance is optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS-optimized
	// instance.
	//
	// Default: false
	EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"`

	// The IAM instance profile.
	IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"`

	// The ID of the AMI, which you can get by calling DescribeImages.
	ImageId *string `type:"string" required:"true"`

	// Indicates whether an instance stops or terminates when you initiate shutdown
	// from the instance (using the operating system command for system shutdown).
	//
	// Default: stop
	InstanceInitiatedShutdownBehavior *string `locationName:"instanceInitiatedShutdownBehavior" type:"string" enum:"ShutdownBehavior"`

	// The instance type. For more information, see Instance Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	//
	// Default: m1.small
	InstanceType *string `type:"string" enum:"InstanceType"`

	// The ID of the kernel.
	//
	//  We recommend that you use PV-GRUB instead of kernels and RAM disks. For
	// more information, see  PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	KernelId *string `type:"string"`

	// The name of the key pair. You can create a key pair using CreateKeyPair or
	// ImportKeyPair.
	//
	//  If you do not specify a key pair, you can't connect to the instance unless
	// you choose an AMI that is configured to allow users another way to log in.
	KeyName *string `type:"string"`

	// The maximum number of instances to launch. If you specify more instances
	// than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches
	// the largest possible number of instances above MinCount.
	//
	// Constraints: Between 1 and the maximum number you're allowed for the specified
	// instance type. For more information about the default limits, and how to
	// request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2)
	// in the Amazon EC2 FAQ.
	MaxCount *int64 `type:"integer" required:"true"`

	// The minimum number of instances to launch. If you specify a minimum that
	// is more instances than Amazon EC2 can launch in the target Availability Zone,
	// Amazon EC2 launches no instances.
	//
	// Constraints: Between 1 and the maximum number you're allowed for the specified
	// instance type. For more information about the default limits, and how to
	// request an increase, see How many instances can I run in Amazon EC2 (http://aws.amazon.com/ec2/faqs/#How_many_instances_can_I_run_in_Amazon_EC2)
	// in the Amazon EC2 General FAQ.
	MinCount *int64 `type:"integer" required:"true"`

	// The monitoring for the instance.
	Monitoring *RunInstancesMonitoringEnabled `type:"structure"`

	// One or more network interfaces.
	NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterface" locationNameList:"item" type:"list"`

	// The placement for the instance.
	Placement *Placement `type:"structure"`

	// [EC2-VPC] The primary IP address. You must specify a value from the IP address
	// range of the subnet.
	//
	// Only one private IP address can be designated as primary. Therefore, you
	// can't specify this parameter if PrivateIpAddresses.n.Primary is set to true
	// and PrivateIpAddresses.n.PrivateIpAddress is set to an IP address.
	//
	// You cannot specify this option if you're launching more than one instance
	// in the request.
	//
	// Default: We select an IP address from the IP address range of the subnet.
	PrivateIpAddress *string `locationName:"privateIpAddress" type:"string"`

	// The ID of the RAM disk.
	//
	//  We recommend that you use PV-GRUB instead of kernels and RAM disks. For
	// more information, see  PV-GRUB (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	RamdiskId *string `type:"string"`

	// One or more security group IDs. You can create a security group using CreateSecurityGroup.
	//
	// Default: Amazon EC2 uses the default security group.
	SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"`

	// [EC2-Classic, default VPC] One or more security group names. For a nondefault
	// VPC, you must use security group IDs instead.
	//
	// Default: Amazon EC2 uses the default security group.
	SecurityGroups []*string `locationName:"SecurityGroup" locationNameList:"SecurityGroup" type:"list"`

	// [EC2-VPC] The ID of the subnet to launch the instance into.
	SubnetId *string `type:"string"`

	// The user data to make available to the instance. For more information, see
	// Running Commands on Your Linux Instance at Launch (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/user-data.html)
	// (Linux) and Adding User Data (http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/ec2-instance-metadata.html#instancedata-add-user-data)
	// (Windows). If you are using an AWS SDK or command line tool, Base64-encoding
	// is performed for you, and you can load the text from a file. Otherwise, you
	// must provide Base64-encoded text.
	UserData *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for RunInstances.

func (RunInstancesInput) GoString added in v0.6.5 

func (s RunInstancesInput) GoString() string

GoString returns the string representation

func (RunInstancesInput) String added in v0.6.5 

func (s RunInstancesInput) String() string

String returns the string representation

func (*RunInstancesInput) Validate added in v1.1.21 

func (s *RunInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RunInstancesMonitoringEnabled 

type RunInstancesMonitoringEnabled struct {

	// Indicates whether monitoring is enabled for the instance.
	Enabled *bool `locationName:"enabled" type:"boolean" required:"true"`
	// contains filtered or unexported fields
}

Describes the monitoring for the instance.

func (RunInstancesMonitoringEnabled) GoString added in v0.6.5 

func (s RunInstancesMonitoringEnabled) GoString() string

GoString returns the string representation

func (RunInstancesMonitoringEnabled) String added in v0.6.5 

func (s RunInstancesMonitoringEnabled) String() string

String returns the string representation

func (*RunInstancesMonitoringEnabled) Validate added in v1.1.21 

func (s *RunInstancesMonitoringEnabled) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RunScheduledInstancesInput added in v1.0.9 

type RunScheduledInstancesInput struct {

	// Unique, case-sensitive identifier that ensures the idempotency of the request.
	// For more information, see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `type:"string" idempotencyToken:"true"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `type:"boolean"`

	// The number of instances.
	//
	// Default: 1
	InstanceCount *int64 `type:"integer"`

	// The launch specification. You must match the instance type, Availability
	// Zone, network, and platform of the schedule that you purchased.
	LaunchSpecification *ScheduledInstancesLaunchSpecification `type:"structure" required:"true"`

	// The Scheduled Instance ID.
	ScheduledInstanceId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RunScheduledInstances.

func (RunScheduledInstancesInput) GoString added in v1.0.9 

func (s RunScheduledInstancesInput) GoString() string

GoString returns the string representation

func (RunScheduledInstancesInput) String added in v1.0.9 

func (s RunScheduledInstancesInput) String() string

String returns the string representation

func (*RunScheduledInstancesInput) Validate added in v1.1.21 

func (s *RunScheduledInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RunScheduledInstancesOutput added in v1.0.9 

type RunScheduledInstancesOutput struct {

	// The IDs of the newly launched instances.
	InstanceIdSet []*string `locationName:"instanceIdSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of RunScheduledInstances.

func (RunScheduledInstancesOutput) GoString added in v1.0.9 

func (s RunScheduledInstancesOutput) GoString() string

GoString returns the string representation

func (RunScheduledInstancesOutput) String added in v1.0.9 

func (s RunScheduledInstancesOutput) String() string

String returns the string representation

type S3Storage 

type S3Storage struct {

	// The access key ID of the owner of the bucket. Before you specify a value
	// for your access key ID, review and follow the guidance in Best Practices
	// for Managing AWS Access Keys (http://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html).
	AWSAccessKeyId *string `type:"string"`

	// The bucket in which to store the AMI. You can specify a bucket that you already
	// own or a new bucket that Amazon EC2 creates on your behalf. If you specify
	// a bucket that belongs to someone else, Amazon EC2 returns an error.
	Bucket *string `locationName:"bucket" type:"string"`

	// The beginning of the file name of the AMI.
	Prefix *string `locationName:"prefix" type:"string"`

	// An Amazon S3 upload policy that gives Amazon EC2 permission to upload items
	// into Amazon S3 on your behalf.
	//
	// UploadPolicy is automatically base64 encoded/decoded by the SDK.
	UploadPolicy []byte `locationName:"uploadPolicy" type:"blob"`

	// The signature of the JSON document.
	UploadPolicySignature *string `locationName:"uploadPolicySignature" type:"string"`
	// contains filtered or unexported fields
}

Describes the storage parameters for S3 and S3 buckets for an instance store-backed AMI.

func (S3Storage) GoString added in v0.6.5 

func (s S3Storage) GoString() string

GoString returns the string representation

func (S3Storage) String added in v0.6.5 

func (s S3Storage) String() string

String returns the string representation

type ScheduledInstance added in v1.0.9 

type ScheduledInstance struct {

	// The Availability Zone.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The date when the Scheduled Instance was purchased.
	CreateDate *time.Time `locationName:"createDate" type:"timestamp" timestampFormat:"iso8601"`

	// The hourly price for a single instance.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The number of instances.
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string"`

	// The network platform (EC2-Classic or EC2-VPC).
	NetworkPlatform *string `locationName:"networkPlatform" type:"string"`

	// The time for the next schedule to start.
	NextSlotStartTime *time.Time `locationName:"nextSlotStartTime" type:"timestamp" timestampFormat:"iso8601"`

	// The platform (Linux/UNIX or Windows).
	Platform *string `locationName:"platform" type:"string"`

	// The time that the previous schedule ended or will end.
	PreviousSlotEndTime *time.Time `locationName:"previousSlotEndTime" type:"timestamp" timestampFormat:"iso8601"`

	// The schedule recurrence.
	Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"`

	// The Scheduled Instance ID.
	ScheduledInstanceId *string `locationName:"scheduledInstanceId" type:"string"`

	// The number of hours in the schedule.
	SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"`

	// The end date for the Scheduled Instance.
	TermEndDate *time.Time `locationName:"termEndDate" type:"timestamp" timestampFormat:"iso8601"`

	// The start date for the Scheduled Instance.
	TermStartDate *time.Time `locationName:"termStartDate" type:"timestamp" timestampFormat:"iso8601"`

	// The total number of hours for a single instance for the entire term.
	TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"`
	// contains filtered or unexported fields
}

Describes a Scheduled Instance.

func (ScheduledInstance) GoString added in v1.0.9 

func (s ScheduledInstance) GoString() string

GoString returns the string representation

func (ScheduledInstance) String added in v1.0.9 

func (s ScheduledInstance) String() string

String returns the string representation

type ScheduledInstanceAvailability added in v1.0.9 

type ScheduledInstanceAvailability struct {

	// The Availability Zone.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The number of available instances.
	AvailableInstanceCount *int64 `locationName:"availableInstanceCount" type:"integer"`

	// The time period for the first schedule to start.
	FirstSlotStartTime *time.Time `locationName:"firstSlotStartTime" type:"timestamp" timestampFormat:"iso8601"`

	// The hourly price for a single instance.
	HourlyPrice *string `locationName:"hourlyPrice" type:"string"`

	// The instance type. You can specify one of the C3, C4, M4, or R3 instance
	// types.
	InstanceType *string `locationName:"instanceType" type:"string"`

	// The maximum term. The only possible value is 365 days.
	MaxTermDurationInDays *int64 `locationName:"maxTermDurationInDays" type:"integer"`

	// The minimum term. The only possible value is 365 days.
	MinTermDurationInDays *int64 `locationName:"minTermDurationInDays" type:"integer"`

	// The network platform (EC2-Classic or EC2-VPC).
	NetworkPlatform *string `locationName:"networkPlatform" type:"string"`

	// The platform (Linux/UNIX or Windows).
	Platform *string `locationName:"platform" type:"string"`

	// The purchase token. This token expires in two hours.
	PurchaseToken *string `locationName:"purchaseToken" type:"string"`

	// The schedule recurrence.
	Recurrence *ScheduledInstanceRecurrence `locationName:"recurrence" type:"structure"`

	// The number of hours in the schedule.
	SlotDurationInHours *int64 `locationName:"slotDurationInHours" type:"integer"`

	// The total number of hours for a single instance for the entire term.
	TotalScheduledInstanceHours *int64 `locationName:"totalScheduledInstanceHours" type:"integer"`
	// contains filtered or unexported fields
}

Describes a schedule that is available for your Scheduled Instances.

func (ScheduledInstanceAvailability) GoString added in v1.0.9 

func (s ScheduledInstanceAvailability) GoString() string

GoString returns the string representation

func (ScheduledInstanceAvailability) String added in v1.0.9 

func (s ScheduledInstanceAvailability) String() string

String returns the string representation

type ScheduledInstanceRecurrence added in v1.0.9 

type ScheduledInstanceRecurrence struct {

	// The frequency (Daily, Weekly, or Monthly).
	Frequency *string `locationName:"frequency" type:"string"`

	// The interval quantity. The interval unit depends on the value of frequency.
	// For example, every 2 weeks or every 2 months.
	Interval *int64 `locationName:"interval" type:"integer"`

	// The days. For a monthly schedule, this is one or more days of the month (1-31).
	// For a weekly schedule, this is one or more days of the week (1-7, where 1
	// is Sunday).
	OccurrenceDaySet []*int64 `locationName:"occurrenceDaySet" locationNameList:"item" type:"list"`

	// Indicates whether the occurrence is relative to the end of the specified
	// week or month.
	OccurrenceRelativeToEnd *bool `locationName:"occurrenceRelativeToEnd" type:"boolean"`

	// The unit for occurrenceDaySet (DayOfWeek or DayOfMonth).
	OccurrenceUnit *string `locationName:"occurrenceUnit" type:"string"`
	// contains filtered or unexported fields
}

Describes the recurring schedule for a Scheduled Instance.

func (ScheduledInstanceRecurrence) GoString added in v1.0.9 

func (s ScheduledInstanceRecurrence) GoString() string

GoString returns the string representation

func (ScheduledInstanceRecurrence) String added in v1.0.9 

func (s ScheduledInstanceRecurrence) String() string

String returns the string representation

type ScheduledInstanceRecurrenceRequest added in v1.0.9 

type ScheduledInstanceRecurrenceRequest struct {

	// The frequency (Daily, Weekly, or Monthly).
	Frequency *string `type:"string"`

	// The interval quantity. The interval unit depends on the value of Frequency.
	// For example, every 2 weeks or every 2 months.
	Interval *int64 `type:"integer"`

	// The days. For a monthly schedule, this is one or more days of the month (1-31).
	// For a weekly schedule, this is one or more days of the week (1-7, where 1
	// is Sunday). You can't specify this value with a daily schedule. If the occurrence
	// is relative to the end of the month, you can specify only a single day.
	OccurrenceDays []*int64 `locationName:"OccurrenceDay" locationNameList:"OccurenceDay" type:"list"`

	// Indicates whether the occurrence is relative to the end of the specified
	// week or month. You can't specify this value with a daily schedule.
	OccurrenceRelativeToEnd *bool `type:"boolean"`

	// The unit for OccurrenceDays (DayOfWeek or DayOfMonth). This value is required
	// for a monthly schedule. You can't specify DayOfWeek with a weekly schedule.
	// You can't specify this value with a daily schedule.
	OccurrenceUnit *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the recurring schedule for a Scheduled Instance.

func (ScheduledInstanceRecurrenceRequest) GoString added in v1.0.9 

func (s ScheduledInstanceRecurrenceRequest) GoString() string

GoString returns the string representation

func (ScheduledInstanceRecurrenceRequest) String added in v1.0.9 

func (s ScheduledInstanceRecurrenceRequest) String() string

String returns the string representation

type ScheduledInstancesBlockDeviceMapping added in v1.0.9 

type ScheduledInstancesBlockDeviceMapping struct {

	// The device name exposed to the instance (for example, /dev/sdh or xvdh).
	DeviceName *string `type:"string"`

	// Parameters used to set up EBS volumes automatically when the instance is
	// launched.
	Ebs *ScheduledInstancesEbs `type:"structure"`

	// Suppresses the specified device included in the block device mapping of the
	// AMI.
	NoDevice *string `type:"string"`

	// The virtual device name (ephemeralN). Instance store volumes are numbered
	// starting from 0. An instance type with two available instance store volumes
	// can specify mappings for ephemeral0 and ephemeral1.The number of available
	// instance store volumes depends on the instance type. After you connect to
	// the instance, you must mount the volume.
	//
	// Constraints: For M3 instances, you must specify instance store volumes in
	// the block device mapping for the instance. When you launch an M3 instance,
	// we ignore any instance store volumes specified in the block device mapping
	// for the AMI.
	VirtualName *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a block device mapping for a Scheduled Instance.

func (ScheduledInstancesBlockDeviceMapping) GoString added in v1.0.9 

func (s ScheduledInstancesBlockDeviceMapping) GoString() string

GoString returns the string representation

func (ScheduledInstancesBlockDeviceMapping) String added in v1.0.9 

func (s ScheduledInstancesBlockDeviceMapping) String() string

String returns the string representation

type ScheduledInstancesEbs added in v1.0.9 

type ScheduledInstancesEbs struct {

	// Indicates whether the volume is deleted on instance termination.
	DeleteOnTermination *bool `type:"boolean"`

	// Indicates whether the volume is encrypted. You can attached encrypted volumes
	// only to instances that support them.
	Encrypted *bool `type:"boolean"`

	// The number of I/O operations per second (IOPS) that the volume supports.
	// For io1 volumes, this represents the number of IOPS that are provisioned
	// for the volume. For gp2 volumes, this represents the baseline performance
	// of the volume and the rate at which the volume accumulates I/O credits for
	// bursting. For more information about gp2 baseline performance, I/O credits,
	// and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	//
	// Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for
	// gp2 volumes.
	//
	// Condition: This parameter is required for requests to create io1volumes;
	// it is not used in requests to create gp2, st1, sc1, or standard volumes.
	Iops *int64 `type:"integer"`

	// The ID of the snapshot.
	SnapshotId *string `type:"string"`

	// The size of the volume, in GiB.
	//
	// Default: If you're creating the volume from a snapshot and don't specify
	// a volume size, the default is the snapshot size.
	VolumeSize *int64 `type:"integer"`

	// The volume type. gp2 for General Purpose SSD, io1 for Provisioned IOPS SSD,
	// Throughput Optimized HDD for st1, Cold HDD for sc1, or standard for Magnetic.
	//
	// Default: standard
	VolumeType *string `type:"string"`
	// contains filtered or unexported fields
}

Describes an EBS volume for a Scheduled Instance.

func (ScheduledInstancesEbs) GoString added in v1.0.9 

func (s ScheduledInstancesEbs) GoString() string

GoString returns the string representation

func (ScheduledInstancesEbs) String added in v1.0.9 

func (s ScheduledInstancesEbs) String() string

String returns the string representation

type ScheduledInstancesIamInstanceProfile added in v1.0.9 

type ScheduledInstancesIamInstanceProfile struct {

	// The Amazon Resource Name (ARN).
	Arn *string `type:"string"`

	// The name.
	Name *string `type:"string"`
	// contains filtered or unexported fields
}

Describes an IAM instance profile for a Scheduled Instance.

func (ScheduledInstancesIamInstanceProfile) GoString added in v1.0.9 

func (s ScheduledInstancesIamInstanceProfile) GoString() string

GoString returns the string representation

func (ScheduledInstancesIamInstanceProfile) String added in v1.0.9 

func (s ScheduledInstancesIamInstanceProfile) String() string

String returns the string representation

type ScheduledInstancesLaunchSpecification added in v1.0.9 

type ScheduledInstancesLaunchSpecification struct {

	// One or more block device mapping entries.
	BlockDeviceMappings []*ScheduledInstancesBlockDeviceMapping `locationName:"BlockDeviceMapping" locationNameList:"BlockDeviceMapping" type:"list"`

	// Indicates whether the instances are optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS-optimized
	// instance.
	//
	// Default: false
	EbsOptimized *bool `type:"boolean"`

	// The IAM instance profile.
	IamInstanceProfile *ScheduledInstancesIamInstanceProfile `type:"structure"`

	// The ID of the Amazon Machine Image (AMI).
	ImageId *string `type:"string" required:"true"`

	// The instance type.
	InstanceType *string `type:"string"`

	// The ID of the kernel.
	KernelId *string `type:"string"`

	// The name of the key pair.
	KeyName *string `type:"string"`

	// Enable or disable monitoring for the instances.
	Monitoring *ScheduledInstancesMonitoring `type:"structure"`

	// One or more network interfaces.
	NetworkInterfaces []*ScheduledInstancesNetworkInterface `locationName:"NetworkInterface" locationNameList:"NetworkInterface" type:"list"`

	// The placement information.
	Placement *ScheduledInstancesPlacement `type:"structure"`

	// The ID of the RAM disk.
	RamdiskId *string `type:"string"`

	// The IDs of one or more security groups.
	SecurityGroupIds []*string `locationName:"SecurityGroupId" locationNameList:"SecurityGroupId" type:"list"`

	// The ID of the subnet in which to launch the instances.
	SubnetId *string `type:"string"`

	// The base64-encoded MIME user data.
	UserData *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the launch specification for a Scheduled Instance.

If you are launching the Scheduled Instance in EC2-VPC, you must specify the ID of the subnet. You can specify the subnet using either SubnetId or NetworkInterface.

func (ScheduledInstancesLaunchSpecification) GoString added in v1.0.9 

func (s ScheduledInstancesLaunchSpecification) GoString() string

GoString returns the string representation

func (ScheduledInstancesLaunchSpecification) String added in v1.0.9 

func (s ScheduledInstancesLaunchSpecification) String() string

String returns the string representation

func (*ScheduledInstancesLaunchSpecification) Validate added in v1.1.21 

func (s *ScheduledInstancesLaunchSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ScheduledInstancesMonitoring added in v1.0.9 

type ScheduledInstancesMonitoring struct {

	// Indicates whether monitoring is enabled.
	Enabled *bool `type:"boolean"`
	// contains filtered or unexported fields
}

Describes whether monitoring is enabled for a Scheduled Instance.

func (ScheduledInstancesMonitoring) GoString added in v1.0.9 

func (s ScheduledInstancesMonitoring) GoString() string

GoString returns the string representation

func (ScheduledInstancesMonitoring) String added in v1.0.9 

func (s ScheduledInstancesMonitoring) String() string

String returns the string representation

type ScheduledInstancesNetworkInterface added in v1.0.9 

type ScheduledInstancesNetworkInterface struct {

	// Indicates whether to assign a public IP address to instances launched in
	// a VPC. The public IP address can only be assigned to a network interface
	// for eth0, and can only be assigned to a new network interface, not an existing
	// one. You cannot specify more than one network interface in the request. If
	// launching into a default subnet, the default value is true.
	AssociatePublicIpAddress *bool `type:"boolean"`

	// Indicates whether to delete the interface when the instance is terminated.
	DeleteOnTermination *bool `type:"boolean"`

	// The description.
	Description *string `type:"string"`

	// The index of the device for the network interface attachment.
	DeviceIndex *int64 `type:"integer"`

	// The IDs of one or more security groups.
	Groups []*string `locationName:"Group" locationNameList:"SecurityGroupId" type:"list"`

	// The ID of the network interface.
	NetworkInterfaceId *string `type:"string"`

	// The IP address of the network interface within the subnet.
	PrivateIpAddress *string `type:"string"`

	// The private IP addresses.
	PrivateIpAddressConfigs []*ScheduledInstancesPrivateIpAddressConfig `locationName:"PrivateIpAddressConfig" locationNameList:"PrivateIpAddressConfigSet" type:"list"`

	// The number of secondary private IP addresses.
	SecondaryPrivateIpAddressCount *int64 `type:"integer"`

	// The ID of the subnet.
	SubnetId *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a network interface for a Scheduled Instance.

func (ScheduledInstancesNetworkInterface) GoString added in v1.0.9 

func (s ScheduledInstancesNetworkInterface) GoString() string

GoString returns the string representation

func (ScheduledInstancesNetworkInterface) String added in v1.0.9 

func (s ScheduledInstancesNetworkInterface) String() string

String returns the string representation

type ScheduledInstancesPlacement added in v1.0.9 

type ScheduledInstancesPlacement struct {

	// The Availability Zone.
	AvailabilityZone *string `type:"string"`

	// The name of the placement group.
	GroupName *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the placement for a Scheduled Instance.

func (ScheduledInstancesPlacement) GoString added in v1.0.9 

func (s ScheduledInstancesPlacement) GoString() string

GoString returns the string representation

func (ScheduledInstancesPlacement) String added in v1.0.9 

func (s ScheduledInstancesPlacement) String() string

String returns the string representation

type ScheduledInstancesPrivateIpAddressConfig added in v1.0.9 

type ScheduledInstancesPrivateIpAddressConfig struct {

	// Indicates whether this is a primary IP address. Otherwise, this is a secondary
	// IP address.
	Primary *bool `type:"boolean"`

	// The IP address.
	PrivateIpAddress *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a private IP address for a Scheduled Instance.

func (ScheduledInstancesPrivateIpAddressConfig) GoString added in v1.0.9 

func (s ScheduledInstancesPrivateIpAddressConfig) GoString() string

GoString returns the string representation

func (ScheduledInstancesPrivateIpAddressConfig) String added in v1.0.9 

func (s ScheduledInstancesPrivateIpAddressConfig) String() string

String returns the string representation

type SecurityGroup 

type SecurityGroup struct {

	// A description of the security group.
	Description *string `locationName:"groupDescription" type:"string"`

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string"`

	// The name of the security group.
	GroupName *string `locationName:"groupName" type:"string"`

	// One or more inbound rules associated with the security group.
	IpPermissions []*IpPermission `locationName:"ipPermissions" locationNameList:"item" type:"list"`

	// [EC2-VPC] One or more outbound rules associated with the security group.
	IpPermissionsEgress []*IpPermission `locationName:"ipPermissionsEgress" locationNameList:"item" type:"list"`

	// The AWS account ID of the owner of the security group.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// Any tags assigned to the security group.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// [EC2-VPC] The ID of the VPC for the security group.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a security group

func (SecurityGroup) GoString added in v0.6.5 

func (s SecurityGroup) GoString() string

GoString returns the string representation

func (SecurityGroup) String added in v0.6.5 

func (s SecurityGroup) String() string

String returns the string representation

type SecurityGroupReference added in v1.1.26 

type SecurityGroupReference struct {

	// The ID of your security group.
	GroupId *string `locationName:"groupId" type:"string" required:"true"`

	// The ID of the VPC with the referencing security group.
	ReferencingVpcId *string `locationName:"referencingVpcId" type:"string" required:"true"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPC with a security group that references your security group.

func (SecurityGroupReference) GoString added in v1.1.26 

func (s SecurityGroupReference) GoString() string

GoString returns the string representation

func (SecurityGroupReference) String added in v1.1.26 

func (s SecurityGroupReference) String() string

String returns the string representation

type SlotDateTimeRangeRequest added in v1.0.9 

type SlotDateTimeRangeRequest struct {

	// The earliest date and time, in UTC, for the Scheduled Instance to start.
	EarliestTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`

	// The latest date and time, in UTC, for the Scheduled Instance to start. This
	// value must be later than or equal to the earliest date and at most three
	// months in the future.
	LatestTime *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

Describes the time period for a Scheduled Instance to start its first schedule. The time period must span less than one day.

func (SlotDateTimeRangeRequest) GoString added in v1.0.9 

func (s SlotDateTimeRangeRequest) GoString() string

GoString returns the string representation

func (SlotDateTimeRangeRequest) String added in v1.0.9 

func (s SlotDateTimeRangeRequest) String() string

String returns the string representation

func (*SlotDateTimeRangeRequest) Validate added in v1.1.21 

func (s *SlotDateTimeRangeRequest) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SlotStartTimeRangeRequest added in v1.0.9 

type SlotStartTimeRangeRequest struct {

	// The earliest date and time, in UTC, for the Scheduled Instance to start.
	EarliestTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The latest date and time, in UTC, for the Scheduled Instance to start.
	LatestTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes the time period for a Scheduled Instance to start its first schedule.

func (SlotStartTimeRangeRequest) GoString added in v1.0.9 

func (s SlotStartTimeRangeRequest) GoString() string

GoString returns the string representation

func (SlotStartTimeRangeRequest) String added in v1.0.9 

func (s SlotStartTimeRangeRequest) String() string

String returns the string representation

type Snapshot 

type Snapshot struct {

	// The data encryption key identifier for the snapshot. This value is a unique
	// identifier that corresponds to the data encryption key that was used to encrypt
	// the original volume or snapshot copy. Because data encryption keys are inherited
	// by volumes created from snapshots, and vice versa, if snapshots share the
	// same data encryption key identifier, then they belong to the same volume/snapshot
	// lineage. This parameter is only returned by the DescribeSnapshots API operation.
	DataEncryptionKeyId *string `locationName:"dataEncryptionKeyId" type:"string"`

	// The description for the snapshot.
	Description *string `locationName:"description" type:"string"`

	// Indicates whether the snapshot is encrypted.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// The full ARN of the AWS Key Management Service (AWS KMS) customer master
	// key (CMK) that was used to protect the volume encryption key for the parent
	// volume.
	KmsKeyId *string `locationName:"kmsKeyId" type:"string"`

	// Value from an Amazon-maintained list (amazon | aws-marketplace | microsoft)
	// of snapshot owners. Not to be confused with the user-configured AWS account
	// alias, which is set from the IAM console.
	OwnerAlias *string `locationName:"ownerAlias" type:"string"`

	// The AWS account ID of the EBS snapshot owner.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The progress of the snapshot, as a percentage.
	Progress *string `locationName:"progress" type:"string"`

	// The ID of the snapshot. Each snapshot receives a unique identifier when it
	// is created.
	SnapshotId *string `locationName:"snapshotId" type:"string"`

	// The time stamp when the snapshot was initiated.
	StartTime *time.Time `locationName:"startTime" type:"timestamp" timestampFormat:"iso8601"`

	// The snapshot state.
	State *string `locationName:"status" type:"string" enum:"SnapshotState"`

	// Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy
	// operation fails (for example, if the proper AWS Key Management Service (AWS
	// KMS) permissions are not obtained) this field displays error state details
	// to help you diagnose why the error occurred. This parameter is only returned
	// by the DescribeSnapshots API operation.
	StateMessage *string `locationName:"statusMessage" type:"string"`

	// Any tags assigned to the snapshot.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the volume that was used to create the snapshot. Snapshots created
	// by the CopySnapshot action have an arbitrary volume ID that should not be
	// used for any purpose.
	VolumeId *string `locationName:"volumeId" type:"string"`

	// The size of the volume, in GiB.
	VolumeSize *int64 `locationName:"volumeSize" type:"integer"`
	// contains filtered or unexported fields
}

Describes a snapshot.

func (Snapshot) GoString added in v0.6.5 

func (s Snapshot) GoString() string

GoString returns the string representation

func (Snapshot) String added in v0.6.5 

func (s Snapshot) String() string

String returns the string representation

type SnapshotDetail 

type SnapshotDetail struct {

	// A description for the snapshot.
	Description *string `locationName:"description" type:"string"`

	// The block device mapping for the snapshot.
	DeviceName *string `locationName:"deviceName" type:"string"`

	// The size of the disk in the snapshot, in GiB.
	DiskImageSize *float64 `locationName:"diskImageSize" type:"double"`

	// The format of the disk image from which the snapshot is created.
	Format *string `locationName:"format" type:"string"`

	// The percentage of progress for the task.
	Progress *string `locationName:"progress" type:"string"`

	// The snapshot ID of the disk being imported.
	SnapshotId *string `locationName:"snapshotId" type:"string"`

	// A brief status of the snapshot creation.
	Status *string `locationName:"status" type:"string"`

	// A detailed status message for the snapshot creation.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// The URL used to access the disk image.
	Url *string `locationName:"url" type:"string"`

	// The S3 bucket for the disk image.
	UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"`
	// contains filtered or unexported fields
}

Describes the snapshot created from the imported disk.

func (SnapshotDetail) GoString added in v0.6.5 

func (s SnapshotDetail) GoString() string

GoString returns the string representation

func (SnapshotDetail) String added in v0.6.5 

func (s SnapshotDetail) String() string

String returns the string representation

type SnapshotDiskContainer 

type SnapshotDiskContainer struct {

	// The description of the disk image being imported.
	Description *string `type:"string"`

	// The format of the disk image being imported.
	//
	// Valid values: RAW | VHD | VMDK | OVA
	Format *string `type:"string"`

	// The URL to the Amazon S3-based disk image being imported. It can either be
	// a https URL (https://..) or an Amazon S3 URL (s3://..).
	Url *string `type:"string"`

	// The S3 bucket for the disk image.
	UserBucket *UserBucket `type:"structure"`
	// contains filtered or unexported fields
}

The disk container object for the import snapshot request.

func (SnapshotDiskContainer) GoString added in v0.6.5 

func (s SnapshotDiskContainer) GoString() string

GoString returns the string representation

func (SnapshotDiskContainer) String added in v0.6.5 

func (s SnapshotDiskContainer) String() string

String returns the string representation

type SnapshotTaskDetail 

type SnapshotTaskDetail struct {

	// The description of the snapshot.
	Description *string `locationName:"description" type:"string"`

	// The size of the disk in the snapshot, in GiB.
	DiskImageSize *float64 `locationName:"diskImageSize" type:"double"`

	// The format of the disk image from which the snapshot is created.
	Format *string `locationName:"format" type:"string"`

	// The percentage of completion for the import snapshot task.
	Progress *string `locationName:"progress" type:"string"`

	// The snapshot ID of the disk being imported.
	SnapshotId *string `locationName:"snapshotId" type:"string"`

	// A brief status for the import snapshot task.
	Status *string `locationName:"status" type:"string"`

	// A detailed status message for the import snapshot task.
	StatusMessage *string `locationName:"statusMessage" type:"string"`

	// The URL of the disk image from which the snapshot is created.
	Url *string `locationName:"url" type:"string"`

	// The S3 bucket for the disk image.
	UserBucket *UserBucketDetails `locationName:"userBucket" type:"structure"`
	// contains filtered or unexported fields
}

Details about the import snapshot task.

func (SnapshotTaskDetail) GoString added in v0.6.5 

func (s SnapshotTaskDetail) GoString() string

GoString returns the string representation

func (SnapshotTaskDetail) String added in v0.6.5 

func (s SnapshotTaskDetail) String() string

String returns the string representation

type SpotDatafeedSubscription 

type SpotDatafeedSubscription struct {

	// The Amazon S3 bucket where the Spot instance data feed is located.
	Bucket *string `locationName:"bucket" type:"string"`

	// The fault codes for the Spot instance request, if any.
	Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"`

	// The AWS account ID of the account.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// The prefix that is prepended to data feed files.
	Prefix *string `locationName:"prefix" type:"string"`

	// The state of the Spot instance data feed subscription.
	State *string `locationName:"state" type:"string" enum:"DatafeedSubscriptionState"`
	// contains filtered or unexported fields
}

Describes the data feed for a Spot instance.

func (SpotDatafeedSubscription) GoString added in v0.6.5 

func (s SpotDatafeedSubscription) GoString() string

GoString returns the string representation

func (SpotDatafeedSubscription) String added in v0.6.5 

func (s SpotDatafeedSubscription) String() string

String returns the string representation

type SpotFleetLaunchSpecification added in v0.6.8 

type SpotFleetLaunchSpecification struct {

	// Deprecated.
	AddressingType *string `locationName:"addressingType" type:"string"`

	// One or more block device mapping entries.
	BlockDeviceMappings []*BlockDeviceMapping `locationName:"blockDeviceMapping" locationNameList:"item" type:"list"`

	// Indicates whether the instances are optimized for EBS I/O. This optimization
	// provides dedicated throughput to Amazon EBS and an optimized configuration
	// stack to provide optimal EBS I/O performance. This optimization isn't available
	// with all instance types. Additional usage charges apply when using an EBS
	// Optimized instance.
	//
	// Default: false
	EbsOptimized *bool `locationName:"ebsOptimized" type:"boolean"`

	// The IAM instance profile.
	IamInstanceProfile *IamInstanceProfileSpecification `locationName:"iamInstanceProfile" type:"structure"`

	// The ID of the AMI.
	ImageId *string `locationName:"imageId" type:"string"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// The ID of the kernel.
	KernelId *string `locationName:"kernelId" type:"string"`

	// The name of the key pair.
	KeyName *string `locationName:"keyName" type:"string"`

	// Enable or disable monitoring for the instances.
	Monitoring *SpotFleetMonitoring `locationName:"monitoring" type:"structure"`

	// One or more network interfaces.
	NetworkInterfaces []*InstanceNetworkInterfaceSpecification `locationName:"networkInterfaceSet" locationNameList:"item" type:"list"`

	// The placement information.
	Placement *SpotPlacement `locationName:"placement" type:"structure"`

	// The ID of the RAM disk.
	RamdiskId *string `locationName:"ramdiskId" type:"string"`

	// One or more security groups. When requesting instances in a VPC, you must
	// specify the IDs of the security groups. When requesting instances in EC2-Classic,
	// you can specify the names or the IDs of the security groups.
	SecurityGroups []*GroupIdentifier `locationName:"groupSet" locationNameList:"item" type:"list"`

	// The bid price per unit hour for the specified instance type. If this value
	// is not specified, the default is the Spot bid price specified for the fleet.
	// To determine the bid price per unit hour, divide the Spot bid price by the
	// value of WeightedCapacity.
	SpotPrice *string `locationName:"spotPrice" type:"string"`

	// The ID of the subnet in which to launch the instances. To specify multiple
	// subnets, separate them using commas; for example, "subnet-a61dafcf, subnet-65ea5f08".
	SubnetId *string `locationName:"subnetId" type:"string"`

	// The user data to make available to the instances. If you are using an AWS
	// SDK or command line tool, Base64-encoding is performed for you, and you can
	// load the text from a file. Otherwise, you must provide Base64-encoded text.
	UserData *string `locationName:"userData" type:"string"`

	// The number of units provided by the specified instance type. These are the
	// same units that you chose to set the target capacity in terms (instances
	// or a performance characteristic such as vCPUs, memory, or I/O).
	//
	// If the target capacity divided by this value is not a whole number, we round
	// the number of instances to the next whole number. If this value is not specified,
	// the default is 1.
	WeightedCapacity *float64 `locationName:"weightedCapacity" type:"double"`
	// contains filtered or unexported fields
}

Describes the launch specification for one or more Spot instances.

func (SpotFleetLaunchSpecification) GoString added in v0.6.8 

func (s SpotFleetLaunchSpecification) GoString() string

GoString returns the string representation

func (SpotFleetLaunchSpecification) String added in v0.6.8 

func (s SpotFleetLaunchSpecification) String() string

String returns the string representation

func (*SpotFleetLaunchSpecification) Validate added in v1.1.21 

func (s *SpotFleetLaunchSpecification) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SpotFleetMonitoring added in v0.6.8 

type SpotFleetMonitoring struct {

	// Enables monitoring for the instance.
	//
	// Default: false
	Enabled *bool `locationName:"enabled" type:"boolean"`
	// contains filtered or unexported fields
}

Describes whether monitoring is enabled.

func (SpotFleetMonitoring) GoString added in v0.6.8 

func (s SpotFleetMonitoring) GoString() string

GoString returns the string representation

func (SpotFleetMonitoring) String added in v0.6.8 

func (s SpotFleetMonitoring) String() string

String returns the string representation

type SpotFleetRequestConfig 

type SpotFleetRequestConfig struct {

	// The progress of the Spot fleet request. If there is an error, the status
	// is error. After all bids are placed, the status is pending_fulfillment. If
	// the size of the fleet is equal to or greater than its target capacity, the
	// status is fulfilled. If the size of the fleet is decreased, the status is
	// pending_termination while Spot instances are terminating.
	ActivityStatus *string `locationName:"activityStatus" type:"string" enum:"ActivityStatus"`

	// The creation date and time of the request.
	CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601" required:"true"`

	// Information about the configuration of the Spot fleet request.
	SpotFleetRequestConfig *SpotFleetRequestConfigData `locationName:"spotFleetRequestConfig" type:"structure" required:"true"`

	// The ID of the Spot fleet request.
	SpotFleetRequestId *string `locationName:"spotFleetRequestId" type:"string" required:"true"`

	// The state of the Spot fleet request.
	SpotFleetRequestState *string `locationName:"spotFleetRequestState" type:"string" required:"true" enum:"BatchState"`
	// contains filtered or unexported fields
}

Describes a Spot fleet request.

func (SpotFleetRequestConfig) GoString added in v0.6.5 

func (s SpotFleetRequestConfig) GoString() string

GoString returns the string representation

func (SpotFleetRequestConfig) String added in v0.6.5 

func (s SpotFleetRequestConfig) String() string

String returns the string representation

type SpotFleetRequestConfigData 

type SpotFleetRequestConfigData struct {

	// Indicates how to allocate the target capacity across the Spot pools specified
	// by the Spot fleet request. The default is lowestPrice.
	AllocationStrategy *string `locationName:"allocationStrategy" type:"string" enum:"AllocationStrategy"`

	// A unique, case-sensitive identifier you provide to ensure idempotency of
	// your listings. This helps avoid duplicate listings. For more information,
	// see Ensuring Idempotency (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html).
	ClientToken *string `locationName:"clientToken" type:"string"`

	// Indicates whether running Spot instances should be terminated if the target
	// capacity of the Spot fleet request is decreased below the current size of
	// the Spot fleet.
	ExcessCapacityTerminationPolicy *string `locationName:"excessCapacityTerminationPolicy" type:"string" enum:"ExcessCapacityTerminationPolicy"`

	// The number of units fulfilled by this request compared to the set target
	// capacity.
	FulfilledCapacity *float64 `locationName:"fulfilledCapacity" type:"double"`

	// Grants the Spot fleet permission to terminate Spot instances on your behalf
	// when you cancel its Spot fleet request using CancelSpotFleetRequests or when
	// the Spot fleet request expires, if you set terminateInstancesWithExpiration.
	IamFleetRole *string `locationName:"iamFleetRole" type:"string" required:"true"`

	// Information about the launch specifications for the Spot fleet request.
	LaunchSpecifications []*SpotFleetLaunchSpecification `locationName:"launchSpecifications" locationNameList:"item" min:"1" type:"list" required:"true"`

	// The bid price per unit hour.
	SpotPrice *string `locationName:"spotPrice" type:"string" required:"true"`

	// The number of units to request. You can choose to set the target capacity
	// in terms of instances or a performance characteristic that is important to
	// your application workload, such as vCPUs, memory, or I/O.
	TargetCapacity *int64 `locationName:"targetCapacity" type:"integer" required:"true"`

	// Indicates whether running Spot instances should be terminated when the Spot
	// fleet request expires.
	TerminateInstancesWithExpiration *bool `locationName:"terminateInstancesWithExpiration" type:"boolean"`

	// The type of request. Indicates whether the fleet will only request the target
	// capacity or also attempt to maintain it. When you request a certain target
	// capacity, the fleet will only place the required bids. It will not attempt
	// to replenish Spot instances if capacity is diminished, nor will it submit
	// bids in alternative Spot pools if capacity is not available. When you want
	// to maintain a certain target capacity, fleet will place the required bids
	// to meet this target capacity. It will also automatically replenish any interrupted
	// instances. Default: maintain.
	Type *string `locationName:"type" type:"string" enum:"FleetType"`

	// The start date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	// The default is to start fulfilling the request immediately.
	ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"`

	// The end date and time of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	// At this point, no new Spot instance requests are placed or enabled to fulfill
	// the request.
	ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes the configuration of a Spot fleet request.

func (SpotFleetRequestConfigData) GoString added in v0.6.5 

func (s SpotFleetRequestConfigData) GoString() string

GoString returns the string representation

func (SpotFleetRequestConfigData) String added in v0.6.5 

func (s SpotFleetRequestConfigData) String() string

String returns the string representation

func (*SpotFleetRequestConfigData) Validate added in v1.1.21 

func (s *SpotFleetRequestConfigData) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SpotInstanceRequest 

type SpotInstanceRequest struct {

	// If you specified a duration and your Spot instance request was fulfilled,
	// this is the fixed hourly price in effect for the Spot instance while it runs.
	ActualBlockHourlyPrice *string `locationName:"actualBlockHourlyPrice" type:"string"`

	// The Availability Zone group. If you specify the same Availability Zone group
	// for all Spot instance requests, all Spot instances are launched in the same
	// Availability Zone.
	AvailabilityZoneGroup *string `locationName:"availabilityZoneGroup" type:"string"`

	// The duration for the Spot instance, in minutes.
	BlockDurationMinutes *int64 `locationName:"blockDurationMinutes" type:"integer"`

	// The date and time when the Spot instance request was created, in UTC format
	// (for example, YYYY-MM-DDTHH:MM:SSZ).
	CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"`

	// The fault codes for the Spot instance request, if any.
	Fault *SpotInstanceStateFault `locationName:"fault" type:"structure"`

	// The instance ID, if an instance has been launched to fulfill the Spot instance
	// request.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The instance launch group. Launch groups are Spot instances that launch together
	// and terminate together.
	LaunchGroup *string `locationName:"launchGroup" type:"string"`

	// Additional information for launching instances.
	LaunchSpecification *LaunchSpecification `locationName:"launchSpecification" type:"structure"`

	// The Availability Zone in which the bid is launched.
	LaunchedAvailabilityZone *string `locationName:"launchedAvailabilityZone" type:"string"`

	// The product description associated with the Spot instance.
	ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"`

	// The ID of the Spot instance request.
	SpotInstanceRequestId *string `locationName:"spotInstanceRequestId" type:"string"`

	// The maximum hourly price (bid) for the Spot instance launched to fulfill
	// the request.
	SpotPrice *string `locationName:"spotPrice" type:"string"`

	// The state of the Spot instance request. Spot bid status information can help
	// you track your Spot instance requests. For more information, see Spot Bid
	// Status (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	State *string `locationName:"state" type:"string" enum:"SpotInstanceState"`

	// The status code and status message describing the Spot instance request.
	Status *SpotInstanceStatus `locationName:"status" type:"structure"`

	// Any tags assigned to the resource.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The Spot instance request type.
	Type *string `locationName:"type" type:"string" enum:"SpotInstanceType"`

	// The start date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	// The request becomes active at this date and time.
	ValidFrom *time.Time `locationName:"validFrom" type:"timestamp" timestampFormat:"iso8601"`

	// The end date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	// If this is a one-time request, it remains active until all instances launch,
	// the request is canceled, or this date is reached. If the request is persistent,
	// it remains active until it is canceled or this date is reached.
	ValidUntil *time.Time `locationName:"validUntil" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a Spot instance request.

func (SpotInstanceRequest) GoString added in v0.6.5 

func (s SpotInstanceRequest) GoString() string

GoString returns the string representation

func (SpotInstanceRequest) String added in v0.6.5 

func (s SpotInstanceRequest) String() string

String returns the string representation

type SpotInstanceStateFault 

type SpotInstanceStateFault struct {

	// The reason code for the Spot instance state change.
	Code *string `locationName:"code" type:"string"`

	// The message for the Spot instance state change.
	Message *string `locationName:"message" type:"string"`
	// contains filtered or unexported fields
}

Describes a Spot instance state change.

func (SpotInstanceStateFault) GoString added in v0.6.5 

func (s SpotInstanceStateFault) GoString() string

GoString returns the string representation

func (SpotInstanceStateFault) String added in v0.6.5 

func (s SpotInstanceStateFault) String() string

String returns the string representation

type SpotInstanceStatus 

type SpotInstanceStatus struct {

	// The status code. For a list of status codes, see Spot Bid Status Codes (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-bid-status.html#spot-instance-bid-status-understand)
	// in the Amazon Elastic Compute Cloud User Guide.
	Code *string `locationName:"code" type:"string"`

	// The description for the status code.
	Message *string `locationName:"message" type:"string"`

	// The date and time of the most recent status update, in UTC format (for example,
	// YYYY-MM-DDTHH:MM:SSZ).
	UpdateTime *time.Time `locationName:"updateTime" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes the status of a Spot instance request.

func (SpotInstanceStatus) GoString added in v0.6.5 

func (s SpotInstanceStatus) GoString() string

GoString returns the string representation

func (SpotInstanceStatus) String added in v0.6.5 

func (s SpotInstanceStatus) String() string

String returns the string representation

type SpotPlacement 

type SpotPlacement struct {

	// The Availability Zone.
	//
	// [Spot fleet only] To specify multiple Availability Zones, separate them
	// using commas; for example, "us-west-2a, us-west-2b".
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The name of the placement group (for cluster instances).
	GroupName *string `locationName:"groupName" type:"string"`
	// contains filtered or unexported fields
}

Describes Spot instance placement.

func (SpotPlacement) GoString added in v0.6.5 

func (s SpotPlacement) GoString() string

GoString returns the string representation

func (SpotPlacement) String added in v0.6.5 

func (s SpotPlacement) String() string

String returns the string representation

type SpotPrice 

type SpotPrice struct {

	// The Availability Zone.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The instance type.
	InstanceType *string `locationName:"instanceType" type:"string" enum:"InstanceType"`

	// A general description of the AMI.
	ProductDescription *string `locationName:"productDescription" type:"string" enum:"RIProductDescription"`

	// The maximum price (bid) that you are willing to pay for a Spot instance.
	SpotPrice *string `locationName:"spotPrice" type:"string"`

	// The date and time the request was created, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).
	Timestamp *time.Time `locationName:"timestamp" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes the maximum hourly price (bid) for any Spot instance launched to fulfill the request.

func (SpotPrice) GoString added in v0.6.5 

func (s SpotPrice) GoString() string

GoString returns the string representation

func (SpotPrice) String added in v0.6.5 

func (s SpotPrice) String() string

String returns the string representation

type StaleIpPermission added in v1.1.26 

type StaleIpPermission struct {

	// The start of the port range for the TCP and UDP protocols, or an ICMP type
	// number. A value of -1 indicates all ICMP types.
	FromPort *int64 `locationName:"fromPort" type:"integer"`

	// The IP protocol name (for tcp, udp, and icmp) or number (see Protocol Numbers)
	// (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml).
	IpProtocol *string `locationName:"ipProtocol" type:"string"`

	// One or more IP ranges. Not applicable for stale security group rules.
	IpRanges []*string `locationName:"ipRanges" locationNameList:"item" type:"list"`

	// One or more prefix list IDs for an AWS service. Not applicable for stale
	// security group rules.
	PrefixListIds []*string `locationName:"prefixListIds" locationNameList:"item" type:"list"`

	// The end of the port range for the TCP and UDP protocols, or an ICMP type
	// number. A value of -1 indicates all ICMP types.
	ToPort *int64 `locationName:"toPort" type:"integer"`

	// One or more security group pairs. Returns the ID of the referenced security
	// group and VPC, and the ID and status of the VPC peering connection.
	UserIdGroupPairs []*UserIdGroupPair `locationName:"groups" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Describes a stale rule in a security group.

func (StaleIpPermission) GoString added in v1.1.26 

func (s StaleIpPermission) GoString() string

GoString returns the string representation

func (StaleIpPermission) String added in v1.1.26 

func (s StaleIpPermission) String() string

String returns the string representation

type StaleSecurityGroup added in v1.1.26 

type StaleSecurityGroup struct {

	// The description of the security group.
	Description *string `locationName:"description" type:"string"`

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string" required:"true"`

	// The name of the security group.
	GroupName *string `locationName:"groupName" type:"string"`

	// Information about the stale inbound rules in the security group.
	StaleIpPermissions []*StaleIpPermission `locationName:"staleIpPermissions" locationNameList:"item" type:"list"`

	// Information about the stale outbound rules in the security group.
	StaleIpPermissionsEgress []*StaleIpPermission `locationName:"staleIpPermissionsEgress" locationNameList:"item" type:"list"`

	// The ID of the VPC for the security group.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a stale security group (a security group that contains stale rules).

func (StaleSecurityGroup) GoString added in v1.1.26 

func (s StaleSecurityGroup) GoString() string

GoString returns the string representation

func (StaleSecurityGroup) String added in v1.1.26 

func (s StaleSecurityGroup) String() string

String returns the string representation

type StartInstancesInput 

type StartInstancesInput struct {

	// Reserved.
	AdditionalInfo *string `locationName:"additionalInfo" type:"string"`

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for StartInstances.

func (StartInstancesInput) GoString added in v0.6.5 

func (s StartInstancesInput) GoString() string

GoString returns the string representation

func (StartInstancesInput) String added in v0.6.5 

func (s StartInstancesInput) String() string

String returns the string representation

func (*StartInstancesInput) Validate added in v1.1.21 

func (s *StartInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StartInstancesOutput 

type StartInstancesOutput struct {

	// Information about one or more started instances.
	StartingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of StartInstances.

func (StartInstancesOutput) GoString added in v0.6.5 

func (s StartInstancesOutput) GoString() string

GoString returns the string representation

func (StartInstancesOutput) String added in v0.6.5 

func (s StartInstancesOutput) String() string

String returns the string representation

type StateReason 

type StateReason struct {

	// The reason code for the state change.
	Code *string `locationName:"code" type:"string"`

	// The message for the state change.
	//
	//    Server.SpotInstanceTermination: A Spot instance was terminated due to
	// an increase in the market price.
	//
	//    Server.InternalError: An internal error occurred during instance launch,
	// resulting in termination.
	//
	//    Server.InsufficientInstanceCapacity: There was insufficient instance
	// capacity to satisfy the launch request.
	//
	//    Client.InternalError: A client error caused the instance to terminate
	// on launch.
	//
	//    Client.InstanceInitiatedShutdown: The instance was shut down using the
	// shutdown -h command from the instance.
	//
	//    Client.UserInitiatedShutdown: The instance was shut down using the Amazon
	// EC2 API.
	//
	//    Client.VolumeLimitExceeded: The limit on the number of EBS volumes or
	// total storage was exceeded. Decrease usage or request an increase in your
	// limits.
	//
	//    Client.InvalidSnapshot.NotFound: The specified snapshot was not found.
	Message *string `locationName:"message" type:"string"`
	// contains filtered or unexported fields
}

Describes a state change.

func (StateReason) GoString added in v0.6.5 

func (s StateReason) GoString() string

GoString returns the string representation

func (StateReason) String added in v0.6.5 

func (s StateReason) String() string

String returns the string representation

type StopInstancesInput 

type StopInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// Forces the instances to stop. The instances do not have an opportunity to
	// flush file system caches or file system metadata. If you use this option,
	// you must perform file system check and repair procedures. This option is
	// not recommended for Windows instances.
	//
	// Default: false
	Force *bool `locationName:"force" type:"boolean"`

	// One or more instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for StopInstances.

func (StopInstancesInput) GoString added in v0.6.5 

func (s StopInstancesInput) GoString() string

GoString returns the string representation

func (StopInstancesInput) String added in v0.6.5 

func (s StopInstancesInput) String() string

String returns the string representation

func (*StopInstancesInput) Validate added in v1.1.21 

func (s *StopInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StopInstancesOutput 

type StopInstancesOutput struct {

	// Information about one or more stopped instances.
	StoppingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of StopInstances.

func (StopInstancesOutput) GoString added in v0.6.5 

func (s StopInstancesOutput) GoString() string

GoString returns the string representation

func (StopInstancesOutput) String added in v0.6.5 

func (s StopInstancesOutput) String() string

String returns the string representation

type Storage 

type Storage struct {

	// An Amazon S3 storage location.
	S3 *S3Storage `type:"structure"`
	// contains filtered or unexported fields
}

Describes the storage location for an instance store-backed AMI.

func (Storage) GoString added in v0.6.5 

func (s Storage) GoString() string

GoString returns the string representation

func (Storage) String added in v0.6.5 

func (s Storage) String() string

String returns the string representation

type Subnet 

type Subnet struct {

	// The Availability Zone of the subnet.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The number of unused IP addresses in the subnet. Note that the IP addresses
	// for any stopped instances are considered unavailable.
	AvailableIpAddressCount *int64 `locationName:"availableIpAddressCount" type:"integer"`

	// The CIDR block assigned to the subnet.
	CidrBlock *string `locationName:"cidrBlock" type:"string"`

	// Indicates whether this is the default subnet for the Availability Zone.
	DefaultForAz *bool `locationName:"defaultForAz" type:"boolean"`

	// Indicates whether instances launched in this subnet receive a public IP address.
	MapPublicIpOnLaunch *bool `locationName:"mapPublicIpOnLaunch" type:"boolean"`

	// The current state of the subnet.
	State *string `locationName:"state" type:"string" enum:"SubnetState"`

	// The ID of the subnet.
	SubnetId *string `locationName:"subnetId" type:"string"`

	// Any tags assigned to the subnet.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC the subnet is in.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a subnet.

func (Subnet) GoString added in v0.6.5 

func (s Subnet) GoString() string

GoString returns the string representation

func (Subnet) String added in v0.6.5 

func (s Subnet) String() string

String returns the string representation

type Tag 

type Tag struct {

	// The key of the tag.
	//
	// Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode
	// characters. May not begin with aws:
	Key *string `locationName:"key" type:"string"`

	// The value of the tag.
	//
	// Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode
	// characters.
	Value *string `locationName:"value" type:"string"`
	// contains filtered or unexported fields
}

Describes a tag.

func (Tag) GoString added in v0.6.5 

func (s Tag) GoString() string

GoString returns the string representation

func (Tag) String added in v0.6.5 

func (s Tag) String() string

String returns the string representation

type TagDescription 

type TagDescription struct {

	// The tag key.
	Key *string `locationName:"key" type:"string"`

	// The ID of the resource. For example, ami-1a2b3c4d.
	ResourceId *string `locationName:"resourceId" type:"string"`

	// The resource type.
	ResourceType *string `locationName:"resourceType" type:"string" enum:"ResourceType"`

	// The tag value.
	Value *string `locationName:"value" type:"string"`
	// contains filtered or unexported fields
}

Describes a tag.

func (TagDescription) GoString added in v0.6.5 

func (s TagDescription) GoString() string

GoString returns the string representation

func (TagDescription) String added in v0.6.5 

func (s TagDescription) String() string

String returns the string representation

type TargetConfiguration added in v1.4.15 

type TargetConfiguration struct {

	// The number of instances the Convertible Reserved Instance offering can be
	// applied to. This parameter is reserved and cannot be specified in a request
	InstanceCount *int64 `locationName:"instanceCount" type:"integer"`

	// The ID of the Convertible Reserved Instance offering.
	OfferingId *string `locationName:"offeringId" type:"string"`
	// contains filtered or unexported fields
}

Information about the Convertible Reserved Instance offering.

func (TargetConfiguration) GoString added in v1.4.15 

func (s TargetConfiguration) GoString() string

GoString returns the string representation

func (TargetConfiguration) String added in v1.4.15 

func (s TargetConfiguration) String() string

String returns the string representation

type TargetConfigurationRequest added in v1.4.15 

type TargetConfigurationRequest struct {

	// The number of instances the Covertible Reserved Instance offering can be
	// applied to. This parameter is reserved and cannot be specified in a request
	InstanceCount *int64 `type:"integer"`

	// The Convertible Reserved Instance offering ID. If this isn't included in
	// the request, the response lists your current Convertible Reserved Instance/s
	// and their value/s.
	OfferingId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Details about the target configuration.

func (TargetConfigurationRequest) GoString added in v1.4.15 

func (s TargetConfigurationRequest) GoString() string

GoString returns the string representation

func (TargetConfigurationRequest) String added in v1.4.15 

func (s TargetConfigurationRequest) String() string

String returns the string representation

func (*TargetConfigurationRequest) Validate added in v1.4.15 

func (s *TargetConfigurationRequest) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TargetReservationValue added in v1.4.15 

type TargetReservationValue struct {

	// The total value of the Convertible Reserved Instances that make up the exchange.
	// This is the sum of the list value, remaining upfront price, and additional
	// upfront cost of the exchange.
	ReservationValue *ReservationValue `locationName:"reservationValue" type:"structure"`

	// The configuration of the Convertible Reserved Instances that make up the
	// exchange.
	TargetConfiguration *TargetConfiguration `locationName:"targetConfiguration" type:"structure"`
	// contains filtered or unexported fields
}

The total value of the new Convertible Reserved Instances.

func (TargetReservationValue) GoString added in v1.4.15 

func (s TargetReservationValue) GoString() string

GoString returns the string representation

func (TargetReservationValue) String added in v1.4.15 

func (s TargetReservationValue) String() string

String returns the string representation

type TerminateInstancesInput 

type TerminateInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more instance IDs.
	//
	// Constraints: Up to 1000 instance IDs. We recommend breaking up this request
	// into smaller batches.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for TerminateInstances.

func (TerminateInstancesInput) GoString added in v0.6.5 

func (s TerminateInstancesInput) GoString() string

GoString returns the string representation

func (TerminateInstancesInput) String added in v0.6.5 

func (s TerminateInstancesInput) String() string

String returns the string representation

func (*TerminateInstancesInput) Validate added in v1.1.21 

func (s *TerminateInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TerminateInstancesOutput 

type TerminateInstancesOutput struct {

	// Information about one or more terminated instances.
	TerminatingInstances []*InstanceStateChange `locationName:"instancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of TerminateInstances.

func (TerminateInstancesOutput) GoString added in v0.6.5 

func (s TerminateInstancesOutput) GoString() string

GoString returns the string representation

func (TerminateInstancesOutput) String added in v0.6.5 

func (s TerminateInstancesOutput) String() string

String returns the string representation

type UnassignPrivateIpAddressesInput added in v0.9.5 

type UnassignPrivateIpAddressesInput struct {

	// The ID of the network interface.
	NetworkInterfaceId *string `locationName:"networkInterfaceId" type:"string" required:"true"`

	// The secondary private IP addresses to unassign from the network interface.
	// You can specify this option multiple times to unassign more than one IP address.
	PrivateIpAddresses []*string `locationName:"privateIpAddress" locationNameList:"PrivateIpAddress" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for UnassignPrivateIpAddresses.

func (UnassignPrivateIpAddressesInput) GoString added in v0.9.5 

func (s UnassignPrivateIpAddressesInput) GoString() string

GoString returns the string representation

func (UnassignPrivateIpAddressesInput) String added in v0.9.5 

func (s UnassignPrivateIpAddressesInput) String() string

String returns the string representation

func (*UnassignPrivateIpAddressesInput) Validate added in v1.1.21 

func (s *UnassignPrivateIpAddressesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UnassignPrivateIpAddressesOutput added in v0.9.5 

type UnassignPrivateIpAddressesOutput struct {
	// contains filtered or unexported fields
}

func (UnassignPrivateIpAddressesOutput) GoString added in v0.9.5 

func (s UnassignPrivateIpAddressesOutput) GoString() string

GoString returns the string representation

func (UnassignPrivateIpAddressesOutput) String added in v0.9.5 

func (s UnassignPrivateIpAddressesOutput) String() string

String returns the string representation

type UnmonitorInstancesInput 

type UnmonitorInstancesInput struct {

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have
	// the required permissions, the error response is DryRunOperation. Otherwise,
	// it is UnauthorizedOperation.
	DryRun *bool `locationName:"dryRun" type:"boolean"`

	// One or more instance IDs.
	InstanceIds []*string `locationName:"InstanceId" locationNameList:"InstanceId" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for UnmonitorInstances.

func (UnmonitorInstancesInput) GoString added in v0.6.5 

func (s UnmonitorInstancesInput) GoString() string

GoString returns the string representation

func (UnmonitorInstancesInput) String added in v0.6.5 

func (s UnmonitorInstancesInput) String() string

String returns the string representation

func (*UnmonitorInstancesInput) Validate added in v1.1.21 

func (s *UnmonitorInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UnmonitorInstancesOutput 

type UnmonitorInstancesOutput struct {

	// Monitoring information for one or more instances.
	InstanceMonitorings []*InstanceMonitoring `locationName:"instancesSet" locationNameList:"item" type:"list"`
	// contains filtered or unexported fields
}

Contains the output of UnmonitorInstances.

func (UnmonitorInstancesOutput) GoString added in v0.6.5 

func (s UnmonitorInstancesOutput) GoString() string

GoString returns the string representation

func (UnmonitorInstancesOutput) String added in v0.6.5 

func (s UnmonitorInstancesOutput) String() string

String returns the string representation

type UnsuccessfulItem 

type UnsuccessfulItem struct {

	// Information about the error.
	Error *UnsuccessfulItemError `locationName:"error" type:"structure" required:"true"`

	// The ID of the resource.
	ResourceId *string `locationName:"resourceId" type:"string"`
	// contains filtered or unexported fields
}

Information about items that were not successfully processed in a batch call.

func (UnsuccessfulItem) GoString added in v0.6.5 

func (s UnsuccessfulItem) GoString() string

GoString returns the string representation

func (UnsuccessfulItem) String added in v0.6.5 

func (s UnsuccessfulItem) String() string

String returns the string representation

type UnsuccessfulItemError 

type UnsuccessfulItemError struct {

	// The error code.
	Code *string `locationName:"code" type:"string" required:"true"`

	// The error message accompanying the error code.
	Message *string `locationName:"message" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information about the error that occurred. For more information about errors, see Error Codes (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/errors-overview.html).

func (UnsuccessfulItemError) GoString added in v0.6.5 

func (s UnsuccessfulItemError) GoString() string

GoString returns the string representation

func (UnsuccessfulItemError) String added in v0.6.5 

func (s UnsuccessfulItemError) String() string

String returns the string representation

type UserBucket 

type UserBucket struct {

	// The name of the S3 bucket where the disk image is located.
	S3Bucket *string `type:"string"`

	// The file name of the disk image.
	S3Key *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the S3 bucket for the disk image.

func (UserBucket) GoString added in v0.6.5 

func (s UserBucket) GoString() string

GoString returns the string representation

func (UserBucket) String added in v0.6.5 

func (s UserBucket) String() string

String returns the string representation

type UserBucketDetails 

type UserBucketDetails struct {

	// The S3 bucket from which the disk image was created.
	S3Bucket *string `locationName:"s3Bucket" type:"string"`

	// The file name of the disk image.
	S3Key *string `locationName:"s3Key" type:"string"`
	// contains filtered or unexported fields
}

Describes the S3 bucket for the disk image.

func (UserBucketDetails) GoString added in v0.6.5 

func (s UserBucketDetails) GoString() string

GoString returns the string representation

func (UserBucketDetails) String added in v0.6.5 

func (s UserBucketDetails) String() string

String returns the string representation

type UserData 

type UserData struct {

	// The user data. If you are using an AWS SDK or command line tool, Base64-encoding
	// is performed for you, and you can load the text from a file. Otherwise, you
	// must provide Base64-encoded text.
	Data *string `locationName:"data" type:"string"`
	// contains filtered or unexported fields
}

Describes the user data for an instance.

func (UserData) GoString added in v0.6.5 

func (s UserData) GoString() string

GoString returns the string representation

func (UserData) String added in v0.6.5 

func (s UserData) String() string

String returns the string representation

type UserIdGroupPair added in v0.9.5 

type UserIdGroupPair struct {

	// The ID of the security group.
	GroupId *string `locationName:"groupId" type:"string"`

	// The name of the security group. In a request, use this parameter for a security
	// group in EC2-Classic or a default VPC only. For a security group in a nondefault
	// VPC, use the security group ID.
	GroupName *string `locationName:"groupName" type:"string"`

	// The status of a VPC peering connection, if applicable.
	PeeringStatus *string `locationName:"peeringStatus" type:"string"`

	// The ID of an AWS account. For a referenced security group in another VPC,
	// the account ID of the referenced security group is returned.
	//
	// [EC2-Classic] Required when adding or removing rules that reference a security
	// group in another AWS account.
	UserId *string `locationName:"userId" type:"string"`

	// The ID of the VPC for the referenced security group, if applicable.
	VpcId *string `locationName:"vpcId" type:"string"`

	// The ID of the VPC peering connection, if applicable.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Describes a security group and AWS account ID pair.

func (UserIdGroupPair) GoString added in v0.9.5 

func (s UserIdGroupPair) GoString() string

GoString returns the string representation

func (UserIdGroupPair) String added in v0.9.5 

func (s UserIdGroupPair) String() string

String returns the string representation

type VgwTelemetry added in v0.9.5 

type VgwTelemetry struct {

	// The number of accepted routes.
	AcceptedRouteCount *int64 `locationName:"acceptedRouteCount" type:"integer"`

	// The date and time of the last change in status.
	LastStatusChange *time.Time `locationName:"lastStatusChange" type:"timestamp" timestampFormat:"iso8601"`

	// The Internet-routable IP address of the virtual private gateway's outside
	// interface.
	OutsideIpAddress *string `locationName:"outsideIpAddress" type:"string"`

	// The status of the VPN tunnel.
	Status *string `locationName:"status" type:"string" enum:"TelemetryStatus"`

	// If an error occurs, a description of the error.
	StatusMessage *string `locationName:"statusMessage" type:"string"`
	// contains filtered or unexported fields
}

Describes telemetry for a VPN tunnel.

func (VgwTelemetry) GoString added in v0.9.5 

func (s VgwTelemetry) GoString() string

GoString returns the string representation

func (VgwTelemetry) String added in v0.9.5 

func (s VgwTelemetry) String() string

String returns the string representation

type Volume 

type Volume struct {

	// Information about the volume attachments.
	Attachments []*VolumeAttachment `locationName:"attachmentSet" locationNameList:"item" type:"list"`

	// The Availability Zone for the volume.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The time stamp when volume creation was initiated.
	CreateTime *time.Time `locationName:"createTime" type:"timestamp" timestampFormat:"iso8601"`

	// Indicates whether the volume will be encrypted.
	Encrypted *bool `locationName:"encrypted" type:"boolean"`

	// The number of I/O operations per second (IOPS) that the volume supports.
	// For Provisioned IOPS SSD volumes, this represents the number of IOPS that
	// are provisioned for the volume. For General Purpose SSD volumes, this represents
	// the baseline performance of the volume and the rate at which the volume accumulates
	// I/O credits for bursting. For more information on General Purpose SSD baseline
	// performance, I/O credits, and bursting, see Amazon EBS Volume Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html)
	// in the Amazon Elastic Compute Cloud User Guide.
	//
	// Constraint: Range is 100-20000 IOPS for io1 volumes and 100-10000 IOPS for
	// gp2 volumes.
	//
	// Condition: This parameter is required for requests to create io1 volumes;
	// it is not used in requests to create gp2, st1, sc1, or standard volumes.
	Iops *int64 `locationName:"iops" type:"integer"`

	// The full ARN of the AWS Key Management Service (AWS KMS) customer master
	// key (CMK) that was used to protect the volume encryption key for the volume.
	KmsKeyId *string `locationName:"kmsKeyId" type:"string"`

	// The size of the volume, in GiBs.
	Size *int64 `locationName:"size" type:"integer"`

	// The snapshot from which the volume was created, if applicable.
	SnapshotId *string `locationName:"snapshotId" type:"string"`

	// The volume state.
	State *string `locationName:"status" type:"string" enum:"VolumeState"`

	// Any tags assigned to the volume.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the volume.
	VolumeId *string `locationName:"volumeId" type:"string"`

	// The volume type. This can be gp2 for General Purpose SSD, io1 for Provisioned
	// IOPS SSD, st1 for Throughput Optimized HDD, sc1 for Cold HDD, or standard
	// for Magnetic volumes.
	VolumeType *string `locationName:"volumeType" type:"string" enum:"VolumeType"`
	// contains filtered or unexported fields
}

Describes a volume.

func (Volume) GoString added in v0.6.5 

func (s Volume) GoString() string

GoString returns the string representation

func (Volume) String added in v0.6.5 

func (s Volume) String() string

String returns the string representation

type VolumeAttachment 

type VolumeAttachment struct {

	// The time stamp when the attachment initiated.
	AttachTime *time.Time `locationName:"attachTime" type:"timestamp" timestampFormat:"iso8601"`

	// Indicates whether the EBS volume is deleted on instance termination.
	DeleteOnTermination *bool `locationName:"deleteOnTermination" type:"boolean"`

	// The device name.
	Device *string `locationName:"device" type:"string"`

	// The ID of the instance.
	InstanceId *string `locationName:"instanceId" type:"string"`

	// The attachment state of the volume.
	State *string `locationName:"status" type:"string" enum:"VolumeAttachmentState"`

	// The ID of the volume.
	VolumeId *string `locationName:"volumeId" type:"string"`
	// contains filtered or unexported fields
}

Describes volume attachment details.

func (VolumeAttachment) GoString added in v0.6.5 

func (s VolumeAttachment) GoString() string

GoString returns the string representation

func (VolumeAttachment) String added in v0.6.5 

func (s VolumeAttachment) String() string

String returns the string representation

type VolumeDetail 

type VolumeDetail struct {

	// The size of the volume, in GiB.
	Size *int64 `locationName:"size" type:"long" required:"true"`
	// contains filtered or unexported fields
}

Describes an EBS volume.

func (VolumeDetail) GoString added in v0.6.5 

func (s VolumeDetail) GoString() string

GoString returns the string representation

func (VolumeDetail) String added in v0.6.5 

func (s VolumeDetail) String() string

String returns the string representation

func (*VolumeDetail) Validate added in v1.1.21 

func (s *VolumeDetail) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type VolumeStatusAction 

type VolumeStatusAction struct {

	// The code identifying the operation, for example, enable-volume-io.
	Code *string `locationName:"code" type:"string"`

	// A description of the operation.
	Description *string `locationName:"description" type:"string"`

	// The ID of the event associated with this operation.
	EventId *string `locationName:"eventId" type:"string"`

	// The event type associated with this operation.
	EventType *string `locationName:"eventType" type:"string"`
	// contains filtered or unexported fields
}

Describes a volume status operation code.

func (VolumeStatusAction) GoString added in v0.6.5 

func (s VolumeStatusAction) GoString() string

GoString returns the string representation

func (VolumeStatusAction) String added in v0.6.5 

func (s VolumeStatusAction) String() string

String returns the string representation

type VolumeStatusDetails 

type VolumeStatusDetails struct {

	// The name of the volume status.
	Name *string `locationName:"name" type:"string" enum:"VolumeStatusName"`

	// The intended status of the volume status.
	Status *string `locationName:"status" type:"string"`
	// contains filtered or unexported fields
}

Describes a volume status.

func (VolumeStatusDetails) GoString added in v0.6.5 

func (s VolumeStatusDetails) GoString() string

GoString returns the string representation

func (VolumeStatusDetails) String added in v0.6.5 

func (s VolumeStatusDetails) String() string

String returns the string representation

type VolumeStatusEvent 

type VolumeStatusEvent struct {

	// A description of the event.
	Description *string `locationName:"description" type:"string"`

	// The ID of this event.
	EventId *string `locationName:"eventId" type:"string"`

	// The type of this event.
	EventType *string `locationName:"eventType" type:"string"`

	// The latest end time of the event.
	NotAfter *time.Time `locationName:"notAfter" type:"timestamp" timestampFormat:"iso8601"`

	// The earliest start time of the event.
	NotBefore *time.Time `locationName:"notBefore" type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

Describes a volume status event.

func (VolumeStatusEvent) GoString added in v0.6.5 

func (s VolumeStatusEvent) GoString() string

GoString returns the string representation

func (VolumeStatusEvent) String added in v0.6.5 

func (s VolumeStatusEvent) String() string

String returns the string representation

type VolumeStatusInfo 

type VolumeStatusInfo struct {

	// The details of the volume status.
	Details []*VolumeStatusDetails `locationName:"details" locationNameList:"item" type:"list"`

	// The status of the volume.
	Status *string `locationName:"status" type:"string" enum:"VolumeStatusInfoStatus"`
	// contains filtered or unexported fields
}

Describes the status of a volume.

func (VolumeStatusInfo) GoString added in v0.6.5 

func (s VolumeStatusInfo) GoString() string

GoString returns the string representation

func (VolumeStatusInfo) String added in v0.6.5 

func (s VolumeStatusInfo) String() string

String returns the string representation

type VolumeStatusItem 

type VolumeStatusItem struct {

	// The details of the operation.
	Actions []*VolumeStatusAction `locationName:"actionsSet" locationNameList:"item" type:"list"`

	// The Availability Zone of the volume.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// A list of events associated with the volume.
	Events []*VolumeStatusEvent `locationName:"eventsSet" locationNameList:"item" type:"list"`

	// The volume ID.
	VolumeId *string `locationName:"volumeId" type:"string"`

	// The volume status.
	VolumeStatus *VolumeStatusInfo `locationName:"volumeStatus" type:"structure"`
	// contains filtered or unexported fields
}

Describes the volume status.

func (VolumeStatusItem) GoString added in v0.6.5 

func (s VolumeStatusItem) GoString() string

GoString returns the string representation

func (VolumeStatusItem) String added in v0.6.5 

func (s VolumeStatusItem) String() string

String returns the string representation

type Vpc added in v0.9.5 

type Vpc struct {

	// The CIDR block for the VPC.
	CidrBlock *string `locationName:"cidrBlock" type:"string"`

	// The ID of the set of DHCP options you've associated with the VPC (or default
	// if the default options are associated with the VPC).
	DhcpOptionsId *string `locationName:"dhcpOptionsId" type:"string"`

	// The allowed tenancy of instances launched into the VPC.
	InstanceTenancy *string `locationName:"instanceTenancy" type:"string" enum:"Tenancy"`

	// Indicates whether the VPC is the default VPC.
	IsDefault *bool `locationName:"isDefault" type:"boolean"`

	// The current state of the VPC.
	State *string `locationName:"state" type:"string" enum:"VpcState"`

	// Any tags assigned to the VPC.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPC.

func (Vpc) GoString added in v0.9.5 

func (s Vpc) GoString() string

GoString returns the string representation

func (Vpc) String added in v0.9.5 

func (s Vpc) String() string

String returns the string representation

type VpcAttachment added in v0.9.5 

type VpcAttachment struct {

	// The current state of the attachment.
	State *string `locationName:"state" type:"string" enum:"AttachmentStatus"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes an attachment between a virtual private gateway and a VPC.

func (VpcAttachment) GoString added in v0.9.5 

func (s VpcAttachment) GoString() string

GoString returns the string representation

func (VpcAttachment) String added in v0.9.5 

func (s VpcAttachment) String() string

String returns the string representation 

type VpcClassicLink struct {

	// Indicates whether the VPC is enabled for ClassicLink.
	ClassicLinkEnabled *bool `locationName:"classicLinkEnabled" type:"boolean"`

	// Any tags assigned to the VPC.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes whether a VPC is enabled for ClassicLink.

func (VpcClassicLink) GoString added in v0.9.5 

func (s VpcClassicLink) GoString() string

GoString returns the string representation

func (VpcClassicLink) String added in v0.9.5 

func (s VpcClassicLink) String() string

String returns the string representation

type VpcEndpoint added in v0.9.5 

type VpcEndpoint struct {

	// The date and time the VPC endpoint was created.
	CreationTimestamp *time.Time `locationName:"creationTimestamp" type:"timestamp" timestampFormat:"iso8601"`

	// The policy document associated with the endpoint.
	PolicyDocument *string `locationName:"policyDocument" type:"string"`

	// One or more route tables associated with the endpoint.
	RouteTableIds []*string `locationName:"routeTableIdSet" locationNameList:"item" type:"list"`

	// The name of the AWS service to which the endpoint is associated.
	ServiceName *string `locationName:"serviceName" type:"string"`

	// The state of the VPC endpoint.
	State *string `locationName:"state" type:"string" enum:"State"`

	// The ID of the VPC endpoint.
	VpcEndpointId *string `locationName:"vpcEndpointId" type:"string"`

	// The ID of the VPC to which the endpoint is associated.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPC endpoint.

func (VpcEndpoint) GoString added in v0.9.5 

func (s VpcEndpoint) GoString() string

GoString returns the string representation

func (VpcEndpoint) String added in v0.9.5 

func (s VpcEndpoint) String() string

String returns the string representation

type VpcPeeringConnection added in v0.9.5 

type VpcPeeringConnection struct {

	// Information about the accepter VPC. CIDR block information is not returned
	// when creating a VPC peering connection, or when describing a VPC peering
	// connection that's in the initiating-request or pending-acceptance state.
	AccepterVpcInfo *VpcPeeringConnectionVpcInfo `locationName:"accepterVpcInfo" type:"structure"`

	// The time that an unaccepted VPC peering connection will expire.
	ExpirationTime *time.Time `locationName:"expirationTime" type:"timestamp" timestampFormat:"iso8601"`

	// Information about the requester VPC.
	RequesterVpcInfo *VpcPeeringConnectionVpcInfo `locationName:"requesterVpcInfo" type:"structure"`

	// The status of the VPC peering connection.
	Status *VpcPeeringConnectionStateReason `locationName:"status" type:"structure"`

	// Any tags assigned to the resource.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The ID of the VPC peering connection.
	VpcPeeringConnectionId *string `locationName:"vpcPeeringConnectionId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPC peering connection.

func (VpcPeeringConnection) GoString added in v0.9.5 

func (s VpcPeeringConnection) GoString() string

GoString returns the string representation

func (VpcPeeringConnection) String added in v0.9.5 

func (s VpcPeeringConnection) String() string

String returns the string representation

type VpcPeeringConnectionOptionsDescription added in v1.1.21 

type VpcPeeringConnectionOptionsDescription struct {

	// Indicates whether a local VPC can resolve public DNS hostnames to private
	// IP addresses when queried from instances in a peer VPC.
	AllowDnsResolutionFromRemoteVpc *bool `locationName:"allowDnsResolutionFromRemoteVpc" type:"boolean"`

	// Indicates whether a local ClassicLink connection can communicate with the
	// peer VPC over the VPC peering connection.
	AllowEgressFromLocalClassicLinkToRemoteVpc *bool `locationName:"allowEgressFromLocalClassicLinkToRemoteVpc" type:"boolean"`

	// Indicates whether a local VPC can communicate with a ClassicLink connection
	// in the peer VPC over the VPC peering connection.
	AllowEgressFromLocalVpcToRemoteClassicLink *bool `locationName:"allowEgressFromLocalVpcToRemoteClassicLink" type:"boolean"`
	// contains filtered or unexported fields
}

Describes the VPC peering connection options.

func (VpcPeeringConnectionOptionsDescription) GoString added in v1.1.21 

func (s VpcPeeringConnectionOptionsDescription) GoString() string

GoString returns the string representation

func (VpcPeeringConnectionOptionsDescription) String added in v1.1.21 

func (s VpcPeeringConnectionOptionsDescription) String() string

String returns the string representation

type VpcPeeringConnectionStateReason added in v0.9.5 

type VpcPeeringConnectionStateReason struct {

	// The status of the VPC peering connection.
	Code *string `locationName:"code" type:"string" enum:"VpcPeeringConnectionStateReasonCode"`

	// A message that provides more information about the status, if applicable.
	Message *string `locationName:"message" type:"string"`
	// contains filtered or unexported fields
}

Describes the status of a VPC peering connection.

func (VpcPeeringConnectionStateReason) GoString added in v0.9.5 

func (s VpcPeeringConnectionStateReason) GoString() string

GoString returns the string representation

func (VpcPeeringConnectionStateReason) String added in v0.9.5 

func (s VpcPeeringConnectionStateReason) String() string

String returns the string representation

type VpcPeeringConnectionVpcInfo added in v0.9.5 

type VpcPeeringConnectionVpcInfo struct {

	// The CIDR block for the VPC.
	CidrBlock *string `locationName:"cidrBlock" type:"string"`

	// The AWS account ID of the VPC owner.
	OwnerId *string `locationName:"ownerId" type:"string"`

	// Information about the VPC peering connection options for the accepter or
	// requester VPC.
	PeeringOptions *VpcPeeringConnectionOptionsDescription `locationName:"peeringOptions" type:"structure"`

	// The ID of the VPC.
	VpcId *string `locationName:"vpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPC in a VPC peering connection.

func (VpcPeeringConnectionVpcInfo) GoString added in v0.9.5 

func (s VpcPeeringConnectionVpcInfo) GoString() string

GoString returns the string representation

func (VpcPeeringConnectionVpcInfo) String added in v0.9.5 

func (s VpcPeeringConnectionVpcInfo) String() string

String returns the string representation

type VpnConnection added in v0.9.5 

type VpnConnection struct {

	// The configuration information for the VPN connection's customer gateway (in
	// the native XML format). This element is always present in the CreateVpnConnection
	// response; however, it's present in the DescribeVpnConnections response only
	// if the VPN connection is in the pending or available state.
	CustomerGatewayConfiguration *string `locationName:"customerGatewayConfiguration" type:"string"`

	// The ID of the customer gateway at your end of the VPN connection.
	CustomerGatewayId *string `locationName:"customerGatewayId" type:"string"`

	// The VPN connection options.
	Options *VpnConnectionOptions `locationName:"options" type:"structure"`

	// The static routes associated with the VPN connection.
	Routes []*VpnStaticRoute `locationName:"routes" locationNameList:"item" type:"list"`

	// The current state of the VPN connection.
	State *string `locationName:"state" type:"string" enum:"VpnState"`

	// Any tags assigned to the VPN connection.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The type of VPN connection.
	Type *string `locationName:"type" type:"string" enum:"GatewayType"`

	// Information about the VPN tunnel.
	VgwTelemetry []*VgwTelemetry `locationName:"vgwTelemetry" locationNameList:"item" type:"list"`

	// The ID of the VPN connection.
	VpnConnectionId *string `locationName:"vpnConnectionId" type:"string"`

	// The ID of the virtual private gateway at the AWS side of the VPN connection.
	VpnGatewayId *string `locationName:"vpnGatewayId" type:"string"`
	// contains filtered or unexported fields
}

Describes a VPN connection.

func (VpnConnection) GoString added in v0.9.5 

func (s VpnConnection) GoString() string

GoString returns the string representation

func (VpnConnection) String added in v0.9.5 

func (s VpnConnection) String() string

String returns the string representation

type VpnConnectionOptions added in v0.9.5 

type VpnConnectionOptions struct {

	// Indicates whether the VPN connection uses static routes only. Static routes
	// must be used for devices that don't support BGP.
	StaticRoutesOnly *bool `locationName:"staticRoutesOnly" type:"boolean"`
	// contains filtered or unexported fields
}

Describes VPN connection options.

func (VpnConnectionOptions) GoString added in v0.9.5 

func (s VpnConnectionOptions) GoString() string

GoString returns the string representation

func (VpnConnectionOptions) String added in v0.9.5 

func (s VpnConnectionOptions) String() string

String returns the string representation

type VpnConnectionOptionsSpecification added in v0.9.5 

type VpnConnectionOptionsSpecification struct {

	// Indicates whether the VPN connection uses static routes only. Static routes
	// must be used for devices that don't support BGP.
	StaticRoutesOnly *bool `locationName:"staticRoutesOnly" type:"boolean"`
	// contains filtered or unexported fields
}

Describes VPN connection options.

func (VpnConnectionOptionsSpecification) GoString added in v0.9.5 

func (s VpnConnectionOptionsSpecification) GoString() string

GoString returns the string representation

func (VpnConnectionOptionsSpecification) String added in v0.9.5 

func (s VpnConnectionOptionsSpecification) String() string

String returns the string representation

type VpnGateway added in v0.9.5 

type VpnGateway struct {

	// The Availability Zone where the virtual private gateway was created, if applicable.
	// This field may be empty or not returned.
	AvailabilityZone *string `locationName:"availabilityZone" type:"string"`

	// The current state of the virtual private gateway.
	State *string `locationName:"state" type:"string" enum:"VpnState"`

	// Any tags assigned to the virtual private gateway.
	Tags []*Tag `locationName:"tagSet" locationNameList:"item" type:"list"`

	// The type of VPN connection the virtual private gateway supports.
	Type *string `locationName:"type" type:"string" enum:"GatewayType"`

	// Any VPCs attached to the virtual private gateway.
	VpcAttachments []*VpcAttachment `locationName:"attachments" locationNameList:"item" type:"list"`

	// The ID of the virtual private gateway.
	VpnGatewayId *string `locationName:"vpnGatewayId" type:"string"`
	// contains filtered or unexported fields
}

Describes a virtual private gateway.

func (VpnGateway) GoString added in v0.9.5 

func (s VpnGateway) GoString() string

GoString returns the string representation

func (VpnGateway) String added in v0.9.5 

func (s VpnGateway) String() string

String returns the string representation

type VpnStaticRoute added in v0.9.5 

type VpnStaticRoute struct {

	// The CIDR block associated with the local subnet of the customer data center.
	DestinationCidrBlock *string `locationName:"destinationCidrBlock" type:"string"`

	// Indicates how the routes were provided.
	Source *string `locationName:"source" type:"string" enum:"VpnStaticRouteSource"`

	// The current state of the static route.
	State *string `locationName:"state" type:"string" enum:"VpnState"`
	// contains filtered or unexported fields
}

Describes a static route for a VPN connection.

func (VpnStaticRoute) GoString added in v0.9.5 

func (s VpnStaticRoute) GoString() string

GoString returns the string representation

func (VpnStaticRoute) String added in v0.9.5 

func (s VpnStaticRoute) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package ec2iface provides an interface to enable mocking the Amazon Elastic Compute Cloud service client for testing your code.
 Package ec2iface provides an interface to enable mocking the Amazon Elastic Compute Cloud service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.