throttlerdata

package
v3.0.0-rc.1+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 8, 2018 License: Apache-2.0 Imports: 3 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Configuration 

type Configuration struct {
	// target_replication_lag_sec is the replication lag (in seconds) the
	// MaxReplicationLagModule tries to aim for.
	// If it is within the target, it tries to increase the throttler
	// rate, otherwise it will lower it based on an educated guess of the
	// slave throughput.
	TargetReplicationLagSec int64 `` /* 135-byte string literal not displayed */
	// max_replication_lag_sec is meant as a last resort.
	// By default, the module tries to find out the system maximum capacity while
	// trying to keep the replication lag around "target_replication_lag_sec".
	// Usually, we'll wait min_duration_between_(increases|decreases)_sec to see
	// the effect of a throttler rate change on the replication lag.
	// But if the lag goes above this field's value we will go into an "emergency"
	// state and throttle more aggressively (see "emergency_decrease" below).
	// This is the only way to ensure that the system will recover.
	MaxReplicationLagSec int64 `` /* 126-byte string literal not displayed */
	// initial_rate is the rate at which the module will start.
	InitialRate int64 `protobuf:"varint,3,opt,name=initial_rate,json=initialRate,proto3" json:"initial_rate,omitempty"`
	// max_increase defines by how much we will increase the rate
	// e.g. 0.05 increases the rate by 5% while 1.0 by 100%.
	// Note that any increase will let the system wait for at least
	// (1 / MaxIncrease) seconds. If we wait for shorter periods of time, we
	// won't notice if the rate increase also increases the replication lag.
	// (If the system was already at its maximum capacity (e.g. 1k QPS) and we
	// increase the rate by e.g. 5% to 1050 QPS, it will take 20 seconds until
	// 1000 extra queries are buffered and the lag increases by 1 second.)
	MaxIncrease float64 `protobuf:"fixed64,4,opt,name=max_increase,json=maxIncrease,proto3" json:"max_increase,omitempty"`
	// emergency_decrease defines by how much we will decrease the current rate
	// if the observed replication lag is above "max_replication_lag_sec".
	// E.g. 0.50 decreases the current rate by 50%.
	EmergencyDecrease float64 `protobuf:"fixed64,5,opt,name=emergency_decrease,json=emergencyDecrease,proto3" json:"emergency_decrease,omitempty"`
	// min_duration_between_increases_sec specifies how long we'll wait at least
	// for the last rate increase to have an effect on the system.
	MinDurationBetweenIncreasesSec int64 `` /* 158-byte string literal not displayed */
	// max_duration_between_increases_sec specifies how long we'll wait at most
	// for the last rate increase to have an effect on the system.
	MaxDurationBetweenIncreasesSec int64 `` /* 158-byte string literal not displayed */
	// min_duration_between_decreases_sec specifies how long we'll wait at least
	// for the last rate decrease to have an effect on the system.
	MinDurationBetweenDecreasesSec int64 `` /* 158-byte string literal not displayed */
	// spread_backlog_across_sec is used when we set the throttler rate after
	// we guessed the rate of a slave and determined its backlog.
	// For example, at a guessed rate of 100 QPS and a lag of 10s, the replica has
	// a backlog of 1000 queries.
	// When we set the new, decreased throttler rate, we factor in how long it
	// will take the slave to go through the backlog (in addition to new
	// requests). This field specifies over which timespan we plan to spread this.
	// For example, for a backlog of 1000 queries spread over 5s means that we
	// have to further reduce the rate by 200 QPS or the backlog will not be
	// processed within the 5 seconds.
	SpreadBacklogAcrossSec int64 `` /* 132-byte string literal not displayed */
	// ignore_n_slowest_replicas will ignore replication lag updates from the
	// N slowest REPLICA tablets. Under certain circumstances, replicas are still
	// considered e.g. a) if the lag is at most max_replication_lag_sec, b) there
	// are less than N+1 replicas or c) the lag increased on each replica such
	// that all replicas were ignored in a row.
	IgnoreNSlowestReplicas int32 `` /* 133-byte string literal not displayed */
	// ignore_n_slowest_rdonlys does the same thing as ignore_n_slowest_replicas
	// but for RDONLY tablets. Note that these two settings are independent.
	IgnoreNSlowestRdonlys int32 `` /* 130-byte string literal not displayed */
	// age_bad_rate_after_sec is the duration after which an unchanged bad rate
	// will "age out" and increase by "bad_rate_increase".
	// Bad rates are tracked by the code in memory.go and serve as an upper bound
	// for future rate changes. This ensures that the adaptive throttler does not
	// try known too high (bad) rates over and over again.
	// To avoid that temporary degradations permanently reduce the maximum rate,
	// a stable bad rate "ages out" after "age_bad_rate_after_sec".
	AgeBadRateAfterSec int64 `protobuf:"varint,12,opt,name=age_bad_rate_after_sec,json=ageBadRateAfterSec,proto3" json:"age_bad_rate_after_sec,omitempty"`
	// bad_rate_increase defines the percentage by which a bad rate will be
	// increased when it's aging out.
	BadRateIncrease float64 `protobuf:"fixed64,13,opt,name=bad_rate_increase,json=badRateIncrease,proto3" json:"bad_rate_increase,omitempty"`
	// max_rate_approach_threshold is the fraction of the current rate limit that the actual
	// rate must exceed for the throttler to increase the limit when the replication lag
	// is below target_replication_lag_sec. For example, assuming the actual replication lag
	// is below target_replication_lag_sec, if the current rate limit is 100, then the actual
	// rate must exceed 100*max_rate_approach_threshold for the throttler to increase the current
	// limit.
	MaxRateApproachThreshold float64  `` /* 140-byte string literal not displayed */
	XXX_NoUnkeyedLiteral     struct{} `json:"-"`
	XXX_unrecognized         []byte   `json:"-"`
	XXX_sizecache            int32    `json:"-"`
}

Configuration holds the configuration parameters for the MaxReplicationLagModule which adaptively adjusts the throttling rate based on the observed replication lag across all replicas.

func (*Configuration) Descriptor 

func (*Configuration) Descriptor() ([]byte, []int)

func (*Configuration) GetAgeBadRateAfterSec 

func (m *Configuration) GetAgeBadRateAfterSec() int64

func (*Configuration) GetBadRateIncrease 

func (m *Configuration) GetBadRateIncrease() float64

func (*Configuration) GetEmergencyDecrease 

func (m *Configuration) GetEmergencyDecrease() float64

func (*Configuration) GetIgnoreNSlowestRdonlys 

func (m *Configuration) GetIgnoreNSlowestRdonlys() int32

func (*Configuration) GetIgnoreNSlowestReplicas 

func (m *Configuration) GetIgnoreNSlowestReplicas() int32

func (*Configuration) GetInitialRate 

func (m *Configuration) GetInitialRate() int64

func (*Configuration) GetMaxDurationBetweenIncreasesSec 

func (m *Configuration) GetMaxDurationBetweenIncreasesSec() int64

func (*Configuration) GetMaxIncrease 

func (m *Configuration) GetMaxIncrease() float64

func (*Configuration) GetMaxRateApproachThreshold 

func (m *Configuration) GetMaxRateApproachThreshold() float64

func (*Configuration) GetMaxReplicationLagSec 

func (m *Configuration) GetMaxReplicationLagSec() int64

func (*Configuration) GetMinDurationBetweenDecreasesSec 

func (m *Configuration) GetMinDurationBetweenDecreasesSec() int64

func (*Configuration) GetMinDurationBetweenIncreasesSec 

func (m *Configuration) GetMinDurationBetweenIncreasesSec() int64

func (*Configuration) GetSpreadBacklogAcrossSec 

func (m *Configuration) GetSpreadBacklogAcrossSec() int64

func (*Configuration) GetTargetReplicationLagSec 

func (m *Configuration) GetTargetReplicationLagSec() int64

func (*Configuration) ProtoMessage 

func (*Configuration) ProtoMessage()

func (*Configuration) Reset 

func (m *Configuration) Reset()

func (*Configuration) String 

func (m *Configuration) String() string

func (*Configuration) XXX_DiscardUnknown 

func (m *Configuration) XXX_DiscardUnknown()

func (*Configuration) XXX_Marshal 

func (m *Configuration) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*Configuration) XXX_Merge 

func (dst *Configuration) XXX_Merge(src proto.Message)

func (*Configuration) XXX_Size 

func (m *Configuration) XXX_Size() int

func (*Configuration) XXX_Unmarshal 

func (m *Configuration) XXX_Unmarshal(b []byte) error

type GetConfigurationRequest 

type GetConfigurationRequest struct {
	// throttler_name specifies which throttler to select. If empty, all active
	// throttlers will be selected.
	ThrottlerName        string   `protobuf:"bytes,1,opt,name=throttler_name,json=throttlerName,proto3" json:"throttler_name,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

GetConfigurationRequest is the payload for the GetConfiguration RPC.

func (*GetConfigurationRequest) Descriptor 

func (*GetConfigurationRequest) Descriptor() ([]byte, []int)

func (*GetConfigurationRequest) GetThrottlerName 

func (m *GetConfigurationRequest) GetThrottlerName() string

func (*GetConfigurationRequest) ProtoMessage 

func (*GetConfigurationRequest) ProtoMessage()

func (*GetConfigurationRequest) Reset 

func (m *GetConfigurationRequest) Reset()

func (*GetConfigurationRequest) String 

func (m *GetConfigurationRequest) String() string

func (*GetConfigurationRequest) XXX_DiscardUnknown 

func (m *GetConfigurationRequest) XXX_DiscardUnknown()

func (*GetConfigurationRequest) XXX_Marshal 

func (m *GetConfigurationRequest) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*GetConfigurationRequest) XXX_Merge 

func (dst *GetConfigurationRequest) XXX_Merge(src proto.Message)

func (*GetConfigurationRequest) XXX_Size 

func (m *GetConfigurationRequest) XXX_Size() int

func (*GetConfigurationRequest) XXX_Unmarshal 

func (m *GetConfigurationRequest) XXX_Unmarshal(b []byte) error

type GetConfigurationResponse 

type GetConfigurationResponse struct {
	// max_rates returns the configurations for each throttler.
	// It's keyed by the throttler name.
	Configurations       map[string]*Configuration `` /* 169-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}                  `json:"-"`
	XXX_unrecognized     []byte                    `json:"-"`
	XXX_sizecache        int32                     `json:"-"`
}

GetConfigurationResponse is returned by the GetConfiguration RPC.

func (*GetConfigurationResponse) Descriptor 

func (*GetConfigurationResponse) Descriptor() ([]byte, []int)

func (*GetConfigurationResponse) GetConfigurations 

func (m *GetConfigurationResponse) GetConfigurations() map[string]*Configuration

func (*GetConfigurationResponse) ProtoMessage 

func (*GetConfigurationResponse) ProtoMessage()

func (*GetConfigurationResponse) Reset 

func (m *GetConfigurationResponse) Reset()

func (*GetConfigurationResponse) String 

func (m *GetConfigurationResponse) String() string

func (*GetConfigurationResponse) XXX_DiscardUnknown 

func (m *GetConfigurationResponse) XXX_DiscardUnknown()

func (*GetConfigurationResponse) XXX_Marshal 

func (m *GetConfigurationResponse) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*GetConfigurationResponse) XXX_Merge 

func (dst *GetConfigurationResponse) XXX_Merge(src proto.Message)

func (*GetConfigurationResponse) XXX_Size 

func (m *GetConfigurationResponse) XXX_Size() int

func (*GetConfigurationResponse) XXX_Unmarshal 

func (m *GetConfigurationResponse) XXX_Unmarshal(b []byte) error

type MaxRatesRequest 

type MaxRatesRequest struct {
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

MaxRatesRequest is the payload for the MaxRates RPC.

func (*MaxRatesRequest) Descriptor 

func (*MaxRatesRequest) Descriptor() ([]byte, []int)

func (*MaxRatesRequest) ProtoMessage 

func (*MaxRatesRequest) ProtoMessage()

func (*MaxRatesRequest) Reset 

func (m *MaxRatesRequest) Reset()

func (*MaxRatesRequest) String 

func (m *MaxRatesRequest) String() string

func (*MaxRatesRequest) XXX_DiscardUnknown 

func (m *MaxRatesRequest) XXX_DiscardUnknown()

func (*MaxRatesRequest) XXX_Marshal 

func (m *MaxRatesRequest) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*MaxRatesRequest) XXX_Merge 

func (dst *MaxRatesRequest) XXX_Merge(src proto.Message)

func (*MaxRatesRequest) XXX_Size 

func (m *MaxRatesRequest) XXX_Size() int

func (*MaxRatesRequest) XXX_Unmarshal 

func (m *MaxRatesRequest) XXX_Unmarshal(b []byte) error

type MaxRatesResponse 

type MaxRatesResponse struct {
	// max_rates returns the max rate for each throttler. It's keyed by the
	// throttler name.
	Rates                map[string]int64 `` /* 152-byte string literal not displayed */
	XXX_NoUnkeyedLiteral struct{}         `json:"-"`
	XXX_unrecognized     []byte           `json:"-"`
	XXX_sizecache        int32            `json:"-"`
}

MaxRatesResponse is returned by the MaxRates RPC.

func (*MaxRatesResponse) Descriptor 

func (*MaxRatesResponse) Descriptor() ([]byte, []int)

func (*MaxRatesResponse) GetRates 

func (m *MaxRatesResponse) GetRates() map[string]int64

func (*MaxRatesResponse) ProtoMessage 

func (*MaxRatesResponse) ProtoMessage()

func (*MaxRatesResponse) Reset 

func (m *MaxRatesResponse) Reset()

func (*MaxRatesResponse) String 

func (m *MaxRatesResponse) String() string

func (*MaxRatesResponse) XXX_DiscardUnknown 

func (m *MaxRatesResponse) XXX_DiscardUnknown()

func (*MaxRatesResponse) XXX_Marshal 

func (m *MaxRatesResponse) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*MaxRatesResponse) XXX_Merge 

func (dst *MaxRatesResponse) XXX_Merge(src proto.Message)

func (*MaxRatesResponse) XXX_Size 

func (m *MaxRatesResponse) XXX_Size() int

func (*MaxRatesResponse) XXX_Unmarshal 

func (m *MaxRatesResponse) XXX_Unmarshal(b []byte) error

type ResetConfigurationRequest 

type ResetConfigurationRequest struct {
	// throttler_name specifies which throttler to reset. If empty, all active
	// throttlers will be reset.
	ThrottlerName        string   `protobuf:"bytes,1,opt,name=throttler_name,json=throttlerName,proto3" json:"throttler_name,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

ResetConfigurationRequest is the payload for the ResetConfiguration RPC.

func (*ResetConfigurationRequest) Descriptor 

func (*ResetConfigurationRequest) Descriptor() ([]byte, []int)

func (*ResetConfigurationRequest) GetThrottlerName 

func (m *ResetConfigurationRequest) GetThrottlerName() string

func (*ResetConfigurationRequest) ProtoMessage 

func (*ResetConfigurationRequest) ProtoMessage()

func (*ResetConfigurationRequest) Reset 

func (m *ResetConfigurationRequest) Reset()

func (*ResetConfigurationRequest) String 

func (m *ResetConfigurationRequest) String() string

func (*ResetConfigurationRequest) XXX_DiscardUnknown 

func (m *ResetConfigurationRequest) XXX_DiscardUnknown()

func (*ResetConfigurationRequest) XXX_Marshal 

func (m *ResetConfigurationRequest) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*ResetConfigurationRequest) XXX_Merge 

func (dst *ResetConfigurationRequest) XXX_Merge(src proto.Message)

func (*ResetConfigurationRequest) XXX_Size 

func (m *ResetConfigurationRequest) XXX_Size() int

func (*ResetConfigurationRequest) XXX_Unmarshal 

func (m *ResetConfigurationRequest) XXX_Unmarshal(b []byte) error

type ResetConfigurationResponse 

type ResetConfigurationResponse struct {
	// names is the list of throttler names which were updated.
	Names                []string `protobuf:"bytes,1,rep,name=names,proto3" json:"names,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

ResetConfigurationResponse is returned by the ResetConfiguration RPC.

func (*ResetConfigurationResponse) Descriptor 

func (*ResetConfigurationResponse) Descriptor() ([]byte, []int)

func (*ResetConfigurationResponse) GetNames 

func (m *ResetConfigurationResponse) GetNames() []string

func (*ResetConfigurationResponse) ProtoMessage 

func (*ResetConfigurationResponse) ProtoMessage()

func (*ResetConfigurationResponse) Reset 

func (m *ResetConfigurationResponse) Reset()

func (*ResetConfigurationResponse) String 

func (m *ResetConfigurationResponse) String() string

func (*ResetConfigurationResponse) XXX_DiscardUnknown 

func (m *ResetConfigurationResponse) XXX_DiscardUnknown()

func (*ResetConfigurationResponse) XXX_Marshal 

func (m *ResetConfigurationResponse) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*ResetConfigurationResponse) XXX_Merge 

func (dst *ResetConfigurationResponse) XXX_Merge(src proto.Message)

func (*ResetConfigurationResponse) XXX_Size 

func (m *ResetConfigurationResponse) XXX_Size() int

func (*ResetConfigurationResponse) XXX_Unmarshal 

func (m *ResetConfigurationResponse) XXX_Unmarshal(b []byte) error

type SetMaxRateRequest 

type SetMaxRateRequest struct {
	Rate                 int64    `protobuf:"varint,1,opt,name=rate,proto3" json:"rate,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

SetMaxRateRequest is the payload for the SetMaxRate RPC.

func (*SetMaxRateRequest) Descriptor 

func (*SetMaxRateRequest) Descriptor() ([]byte, []int)

func (*SetMaxRateRequest) GetRate 

func (m *SetMaxRateRequest) GetRate() int64

func (*SetMaxRateRequest) ProtoMessage 

func (*SetMaxRateRequest) ProtoMessage()

func (*SetMaxRateRequest) Reset 

func (m *SetMaxRateRequest) Reset()

func (*SetMaxRateRequest) String 

func (m *SetMaxRateRequest) String() string

func (*SetMaxRateRequest) XXX_DiscardUnknown 

func (m *SetMaxRateRequest) XXX_DiscardUnknown()

func (*SetMaxRateRequest) XXX_Marshal 

func (m *SetMaxRateRequest) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*SetMaxRateRequest) XXX_Merge 

func (dst *SetMaxRateRequest) XXX_Merge(src proto.Message)

func (*SetMaxRateRequest) XXX_Size 

func (m *SetMaxRateRequest) XXX_Size() int

func (*SetMaxRateRequest) XXX_Unmarshal 

func (m *SetMaxRateRequest) XXX_Unmarshal(b []byte) error

type SetMaxRateResponse 

type SetMaxRateResponse struct {
	// names is the list of throttler names which were updated.
	Names                []string `protobuf:"bytes,1,rep,name=names,proto3" json:"names,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

SetMaxRateResponse is returned by the SetMaxRate RPC.

func (*SetMaxRateResponse) Descriptor 

func (*SetMaxRateResponse) Descriptor() ([]byte, []int)

func (*SetMaxRateResponse) GetNames 

func (m *SetMaxRateResponse) GetNames() []string

func (*SetMaxRateResponse) ProtoMessage 

func (*SetMaxRateResponse) ProtoMessage()

func (*SetMaxRateResponse) Reset 

func (m *SetMaxRateResponse) Reset()

func (*SetMaxRateResponse) String 

func (m *SetMaxRateResponse) String() string

func (*SetMaxRateResponse) XXX_DiscardUnknown 

func (m *SetMaxRateResponse) XXX_DiscardUnknown()

func (*SetMaxRateResponse) XXX_Marshal 

func (m *SetMaxRateResponse) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*SetMaxRateResponse) XXX_Merge 

func (dst *SetMaxRateResponse) XXX_Merge(src proto.Message)

func (*SetMaxRateResponse) XXX_Size 

func (m *SetMaxRateResponse) XXX_Size() int

func (*SetMaxRateResponse) XXX_Unmarshal 

func (m *SetMaxRateResponse) XXX_Unmarshal(b []byte) error

type UpdateConfigurationRequest 

type UpdateConfigurationRequest struct {
	// throttler_name specifies which throttler to update. If empty, all active
	// throttlers will be updated.
	ThrottlerName string `protobuf:"bytes,1,opt,name=throttler_name,json=throttlerName,proto3" json:"throttler_name,omitempty"`
	// configuration is the new (partial) configuration.
	Configuration *Configuration `protobuf:"bytes,2,opt,name=configuration,proto3" json:"configuration,omitempty"`
	// copy_zero_values specifies whether fields with zero values should be copied
	// as well.
	CopyZeroValues       bool     `protobuf:"varint,3,opt,name=copy_zero_values,json=copyZeroValues,proto3" json:"copy_zero_values,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

UpdateConfigurationRequest is the payload for the UpdateConfiguration RPC.

func (*UpdateConfigurationRequest) Descriptor 

func (*UpdateConfigurationRequest) Descriptor() ([]byte, []int)

func (*UpdateConfigurationRequest) GetConfiguration 

func (m *UpdateConfigurationRequest) GetConfiguration() *Configuration

func (*UpdateConfigurationRequest) GetCopyZeroValues 

func (m *UpdateConfigurationRequest) GetCopyZeroValues() bool

func (*UpdateConfigurationRequest) GetThrottlerName 

func (m *UpdateConfigurationRequest) GetThrottlerName() string

func (*UpdateConfigurationRequest) ProtoMessage 

func (*UpdateConfigurationRequest) ProtoMessage()

func (*UpdateConfigurationRequest) Reset 

func (m *UpdateConfigurationRequest) Reset()

func (*UpdateConfigurationRequest) String 

func (m *UpdateConfigurationRequest) String() string

func (*UpdateConfigurationRequest) XXX_DiscardUnknown 

func (m *UpdateConfigurationRequest) XXX_DiscardUnknown()

func (*UpdateConfigurationRequest) XXX_Marshal 

func (m *UpdateConfigurationRequest) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*UpdateConfigurationRequest) XXX_Merge 

func (dst *UpdateConfigurationRequest) XXX_Merge(src proto.Message)

func (*UpdateConfigurationRequest) XXX_Size 

func (m *UpdateConfigurationRequest) XXX_Size() int

func (*UpdateConfigurationRequest) XXX_Unmarshal 

func (m *UpdateConfigurationRequest) XXX_Unmarshal(b []byte) error

type UpdateConfigurationResponse 

type UpdateConfigurationResponse struct {
	// names is the list of throttler names which were updated.
	Names                []string `protobuf:"bytes,1,rep,name=names,proto3" json:"names,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

UpdateConfigurationResponse is returned by the UpdateConfiguration RPC.

func (*UpdateConfigurationResponse) Descriptor 

func (*UpdateConfigurationResponse) Descriptor() ([]byte, []int)

func (*UpdateConfigurationResponse) GetNames 

func (m *UpdateConfigurationResponse) GetNames() []string

func (*UpdateConfigurationResponse) ProtoMessage 

func (*UpdateConfigurationResponse) ProtoMessage()

func (*UpdateConfigurationResponse) Reset 

func (m *UpdateConfigurationResponse) Reset()

func (*UpdateConfigurationResponse) String 

func (m *UpdateConfigurationResponse) String() string

func (*UpdateConfigurationResponse) XXX_DiscardUnknown 

func (m *UpdateConfigurationResponse) XXX_DiscardUnknown()

func (*UpdateConfigurationResponse) XXX_Marshal 

func (m *UpdateConfigurationResponse) XXX_Marshal(b []byte, deterministic bool) ([]byte, error)

func (*UpdateConfigurationResponse) XXX_Merge 

func (dst *UpdateConfigurationResponse) XXX_Merge(src proto.Message)

func (*UpdateConfigurationResponse) XXX_Size 

func (m *UpdateConfigurationResponse) XXX_Size() int

func (*UpdateConfigurationResponse) XXX_Unmarshal 

func (m *UpdateConfigurationResponse) XXX_Unmarshal(b []byte) error

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.