ftlv1connect

package
v0.411.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 14, 2024 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// AdminServicePingProcedure is the fully-qualified name of the AdminService's Ping RPC.
	AdminServicePingProcedure = "/xyz.block.ftl.v1.AdminService/Ping"
	// AdminServiceConfigListProcedure is the fully-qualified name of the AdminService's ConfigList RPC.
	AdminServiceConfigListProcedure = "/xyz.block.ftl.v1.AdminService/ConfigList"
	// AdminServiceConfigGetProcedure is the fully-qualified name of the AdminService's ConfigGet RPC.
	AdminServiceConfigGetProcedure = "/xyz.block.ftl.v1.AdminService/ConfigGet"
	// AdminServiceConfigSetProcedure is the fully-qualified name of the AdminService's ConfigSet RPC.
	AdminServiceConfigSetProcedure = "/xyz.block.ftl.v1.AdminService/ConfigSet"
	// AdminServiceConfigUnsetProcedure is the fully-qualified name of the AdminService's ConfigUnset
	// RPC.
	AdminServiceConfigUnsetProcedure = "/xyz.block.ftl.v1.AdminService/ConfigUnset"
	// AdminServiceSecretsListProcedure is the fully-qualified name of the AdminService's SecretsList
	// RPC.
	AdminServiceSecretsListProcedure = "/xyz.block.ftl.v1.AdminService/SecretsList"
	// AdminServiceSecretGetProcedure is the fully-qualified name of the AdminService's SecretGet RPC.
	AdminServiceSecretGetProcedure = "/xyz.block.ftl.v1.AdminService/SecretGet"
	// AdminServiceSecretSetProcedure is the fully-qualified name of the AdminService's SecretSet RPC.
	AdminServiceSecretSetProcedure = "/xyz.block.ftl.v1.AdminService/SecretSet"
	// AdminServiceSecretUnsetProcedure is the fully-qualified name of the AdminService's SecretUnset
	// RPC.
	AdminServiceSecretUnsetProcedure = "/xyz.block.ftl.v1.AdminService/SecretUnset"
	// AdminServiceMapConfigsForModuleProcedure is the fully-qualified name of the AdminService's
	// MapConfigsForModule RPC.
	AdminServiceMapConfigsForModuleProcedure = "/xyz.block.ftl.v1.AdminService/MapConfigsForModule"
	// AdminServiceMapSecretsForModuleProcedure is the fully-qualified name of the AdminService's
	// MapSecretsForModule RPC.
	AdminServiceMapSecretsForModuleProcedure = "/xyz.block.ftl.v1.AdminService/MapSecretsForModule"
)

These constants are the fully-qualified names of the RPCs defined in this package. They're exposed at runtime as Spec.Procedure and as the final two segments of the HTTP route.

Note that these are different from the fully-qualified method names used by google.golang.org/protobuf/reflect/protoreflect. To convert from these constants to reflection-formatted method names, remove the leading slash and convert the remaining slash to a period.

View Source 
const (
	// ControllerServicePingProcedure is the fully-qualified name of the ControllerService's Ping RPC.
	ControllerServicePingProcedure = "/xyz.block.ftl.v1.ControllerService/Ping"
	// ControllerServiceProcessListProcedure is the fully-qualified name of the ControllerService's
	// ProcessList RPC.
	ControllerServiceProcessListProcedure = "/xyz.block.ftl.v1.ControllerService/ProcessList"
	// ControllerServiceStatusProcedure is the fully-qualified name of the ControllerService's Status
	// RPC.
	ControllerServiceStatusProcedure = "/xyz.block.ftl.v1.ControllerService/Status"
	// ControllerServiceGetArtefactDiffsProcedure is the fully-qualified name of the ControllerService's
	// GetArtefactDiffs RPC.
	ControllerServiceGetArtefactDiffsProcedure = "/xyz.block.ftl.v1.ControllerService/GetArtefactDiffs"
	// ControllerServiceUploadArtefactProcedure is the fully-qualified name of the ControllerService's
	// UploadArtefact RPC.
	ControllerServiceUploadArtefactProcedure = "/xyz.block.ftl.v1.ControllerService/UploadArtefact"
	// ControllerServiceCreateDeploymentProcedure is the fully-qualified name of the ControllerService's
	// CreateDeployment RPC.
	ControllerServiceCreateDeploymentProcedure = "/xyz.block.ftl.v1.ControllerService/CreateDeployment"
	// ControllerServiceGetDeploymentProcedure is the fully-qualified name of the ControllerService's
	// GetDeployment RPC.
	ControllerServiceGetDeploymentProcedure = "/xyz.block.ftl.v1.ControllerService/GetDeployment"
	// ControllerServiceGetDeploymentArtefactsProcedure is the fully-qualified name of the
	// ControllerService's GetDeploymentArtefacts RPC.
	ControllerServiceGetDeploymentArtefactsProcedure = "/xyz.block.ftl.v1.ControllerService/GetDeploymentArtefacts"
	// ControllerServiceRegisterRunnerProcedure is the fully-qualified name of the ControllerService's
	// RegisterRunner RPC.
	ControllerServiceRegisterRunnerProcedure = "/xyz.block.ftl.v1.ControllerService/RegisterRunner"
	// ControllerServiceUpdateDeployProcedure is the fully-qualified name of the ControllerService's
	// UpdateDeploy RPC.
	ControllerServiceUpdateDeployProcedure = "/xyz.block.ftl.v1.ControllerService/UpdateDeploy"
	// ControllerServiceReplaceDeployProcedure is the fully-qualified name of the ControllerService's
	// ReplaceDeploy RPC.
	ControllerServiceReplaceDeployProcedure = "/xyz.block.ftl.v1.ControllerService/ReplaceDeploy"
	// ControllerServiceStreamDeploymentLogsProcedure is the fully-qualified name of the
	// ControllerService's StreamDeploymentLogs RPC.
	ControllerServiceStreamDeploymentLogsProcedure = "/xyz.block.ftl.v1.ControllerService/StreamDeploymentLogs"
)

These constants are the fully-qualified names of the RPCs defined in this package. They're exposed at runtime as Spec.Procedure and as the final two segments of the HTTP route.

Note that these are different from the fully-qualified method names used by google.golang.org/protobuf/reflect/protoreflect. To convert from these constants to reflection-formatted method names, remove the leading slash and convert the remaining slash to a period.

View Source 
const (
	// SchemaServicePingProcedure is the fully-qualified name of the SchemaService's Ping RPC.
	SchemaServicePingProcedure = "/xyz.block.ftl.v1.SchemaService/Ping"
	// SchemaServiceGetSchemaProcedure is the fully-qualified name of the SchemaService's GetSchema RPC.
	SchemaServiceGetSchemaProcedure = "/xyz.block.ftl.v1.SchemaService/GetSchema"
	// SchemaServicePullSchemaProcedure is the fully-qualified name of the SchemaService's PullSchema
	// RPC.
	SchemaServicePullSchemaProcedure = "/xyz.block.ftl.v1.SchemaService/PullSchema"
	// SchemaServiceUpdateDeploymentRuntimeProcedure is the fully-qualified name of the SchemaService's
	// UpdateDeploymentRuntime RPC.
	SchemaServiceUpdateDeploymentRuntimeProcedure = "/xyz.block.ftl.v1.SchemaService/UpdateDeploymentRuntime"
)

These constants are the fully-qualified names of the RPCs defined in this package. They're exposed at runtime as Spec.Procedure and as the final two segments of the HTTP route.

Note that these are different from the fully-qualified method names used by google.golang.org/protobuf/reflect/protoreflect. To convert from these constants to reflection-formatted method names, remove the leading slash and convert the remaining slash to a period.

View Source 
const (
	// VerbServicePingProcedure is the fully-qualified name of the VerbService's Ping RPC.
	VerbServicePingProcedure = "/xyz.block.ftl.v1.VerbService/Ping"
	// VerbServiceCallProcedure is the fully-qualified name of the VerbService's Call RPC.
	VerbServiceCallProcedure = "/xyz.block.ftl.v1.VerbService/Call"
)

These constants are the fully-qualified names of the RPCs defined in this package. They're exposed at runtime as Spec.Procedure and as the final two segments of the HTTP route.

Note that these are different from the fully-qualified method names used by google.golang.org/protobuf/reflect/protoreflect. To convert from these constants to reflection-formatted method names, remove the leading slash and convert the remaining slash to a period.

View Source 
const (
	// AdminServiceName is the fully-qualified name of the AdminService service.
	AdminServiceName = "xyz.block.ftl.v1.AdminService"
)
View Source 
const (
	// ControllerServiceName is the fully-qualified name of the ControllerService service.
	ControllerServiceName = "xyz.block.ftl.v1.ControllerService"
)
View Source 
const (
	// SchemaServiceName is the fully-qualified name of the SchemaService service.
	SchemaServiceName = "xyz.block.ftl.v1.SchemaService"
)
View Source 
const (
	// VerbServiceName is the fully-qualified name of the VerbService service.
	VerbServiceName = "xyz.block.ftl.v1.VerbService"
)

Variables

This section is empty.

Functions

func NewAdminServiceHandler added in v0.240.0 

func NewAdminServiceHandler(svc AdminServiceHandler, opts ...connect.HandlerOption) (string, http.Handler)

NewAdminServiceHandler builds an HTTP handler from the service implementation. It returns the path on which to mount the handler and the handler itself.

By default, handlers support the Connect, gRPC, and gRPC-Web protocols with the binary Protobuf and JSON codecs. They also support gzip compression.

func NewControllerServiceHandler 

func NewControllerServiceHandler(svc ControllerServiceHandler, opts ...connect.HandlerOption) (string, http.Handler)

NewControllerServiceHandler builds an HTTP handler from the service implementation. It returns the path on which to mount the handler and the handler itself.

By default, handlers support the Connect, gRPC, and gRPC-Web protocols with the binary Protobuf and JSON codecs. They also support gzip compression.

func NewSchemaServiceHandler added in v0.398.0 

func NewSchemaServiceHandler(svc SchemaServiceHandler, opts ...connect.HandlerOption) (string, http.Handler)

NewSchemaServiceHandler builds an HTTP handler from the service implementation. It returns the path on which to mount the handler and the handler itself.

By default, handlers support the Connect, gRPC, and gRPC-Web protocols with the binary Protobuf and JSON codecs. They also support gzip compression.

func NewVerbServiceHandler 

func NewVerbServiceHandler(svc VerbServiceHandler, opts ...connect.HandlerOption) (string, http.Handler)

NewVerbServiceHandler builds an HTTP handler from the service implementation. It returns the path on which to mount the handler and the handler itself.

By default, handlers support the Connect, gRPC, and gRPC-Web protocols with the binary Protobuf and JSON codecs. They also support gzip compression.

Types

type AdminServiceClient added in v0.240.0 

type AdminServiceClient interface {
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// List configuration.
	ConfigList(context.Context, *connect.Request[v1.ConfigListRequest]) (*connect.Response[v1.ConfigListResponse], error)
	// Get a config value.
	ConfigGet(context.Context, *connect.Request[v1.ConfigGetRequest]) (*connect.Response[v1.ConfigGetResponse], error)
	// Set a config value.
	ConfigSet(context.Context, *connect.Request[v1.ConfigSetRequest]) (*connect.Response[v1.ConfigSetResponse], error)
	// Unset a config value.
	ConfigUnset(context.Context, *connect.Request[v1.ConfigUnsetRequest]) (*connect.Response[v1.ConfigUnsetResponse], error)
	// List secrets.
	SecretsList(context.Context, *connect.Request[v1.SecretsListRequest]) (*connect.Response[v1.SecretsListResponse], error)
	// Get a secret.
	SecretGet(context.Context, *connect.Request[v1.SecretGetRequest]) (*connect.Response[v1.SecretGetResponse], error)
	// Set a secret.
	SecretSet(context.Context, *connect.Request[v1.SecretSetRequest]) (*connect.Response[v1.SecretSetResponse], error)
	// Unset a secret.
	SecretUnset(context.Context, *connect.Request[v1.SecretUnsetRequest]) (*connect.Response[v1.SecretUnsetResponse], error)
	// MapForModule combines all configuration values visible to the module.
	// Local values take precedence.
	MapConfigsForModule(context.Context, *connect.Request[v1.MapConfigsForModuleRequest]) (*connect.Response[v1.MapConfigsForModuleResponse], error)
	// MapSecretsForModule combines all secrets visible to the module.
	// Local values take precedence.
	MapSecretsForModule(context.Context, *connect.Request[v1.MapSecretsForModuleRequest]) (*connect.Response[v1.MapSecretsForModuleResponse], error)
}

AdminServiceClient is a client for the xyz.block.ftl.v1.AdminService service.

func NewAdminServiceClient added in v0.240.0 

func NewAdminServiceClient(httpClient connect.HTTPClient, baseURL string, opts ...connect.ClientOption) AdminServiceClient

NewAdminServiceClient constructs a client for the xyz.block.ftl.v1.AdminService service. By default, it uses the Connect protocol with the binary Protobuf Codec, asks for gzipped responses, and sends uncompressed requests. To use the gRPC or gRPC-Web protocols, supply the connect.WithGRPC() or connect.WithGRPCWeb() options.

The URL supplied here should be the base URL for the Connect or gRPC server (for example, http://api.acme.com or https://acme.com/grpc).

type AdminServiceHandler added in v0.240.0 

type AdminServiceHandler interface {
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// List configuration.
	ConfigList(context.Context, *connect.Request[v1.ConfigListRequest]) (*connect.Response[v1.ConfigListResponse], error)
	// Get a config value.
	ConfigGet(context.Context, *connect.Request[v1.ConfigGetRequest]) (*connect.Response[v1.ConfigGetResponse], error)
	// Set a config value.
	ConfigSet(context.Context, *connect.Request[v1.ConfigSetRequest]) (*connect.Response[v1.ConfigSetResponse], error)
	// Unset a config value.
	ConfigUnset(context.Context, *connect.Request[v1.ConfigUnsetRequest]) (*connect.Response[v1.ConfigUnsetResponse], error)
	// List secrets.
	SecretsList(context.Context, *connect.Request[v1.SecretsListRequest]) (*connect.Response[v1.SecretsListResponse], error)
	// Get a secret.
	SecretGet(context.Context, *connect.Request[v1.SecretGetRequest]) (*connect.Response[v1.SecretGetResponse], error)
	// Set a secret.
	SecretSet(context.Context, *connect.Request[v1.SecretSetRequest]) (*connect.Response[v1.SecretSetResponse], error)
	// Unset a secret.
	SecretUnset(context.Context, *connect.Request[v1.SecretUnsetRequest]) (*connect.Response[v1.SecretUnsetResponse], error)
	// MapForModule combines all configuration values visible to the module.
	// Local values take precedence.
	MapConfigsForModule(context.Context, *connect.Request[v1.MapConfigsForModuleRequest]) (*connect.Response[v1.MapConfigsForModuleResponse], error)
	// MapSecretsForModule combines all secrets visible to the module.
	// Local values take precedence.
	MapSecretsForModule(context.Context, *connect.Request[v1.MapSecretsForModuleRequest]) (*connect.Response[v1.MapSecretsForModuleResponse], error)
}

AdminServiceHandler is an implementation of the xyz.block.ftl.v1.AdminService service.

type ControllerServiceClient 

type ControllerServiceClient interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// List "processes" running on the cluster.
	ProcessList(context.Context, *connect.Request[v1.ProcessListRequest]) (*connect.Response[v1.ProcessListResponse], error)
	Status(context.Context, *connect.Request[v1.StatusRequest]) (*connect.Response[v1.StatusResponse], error)
	// Get list of artefacts that differ between the server and client.
	GetArtefactDiffs(context.Context, *connect.Request[v1.GetArtefactDiffsRequest]) (*connect.Response[v1.GetArtefactDiffsResponse], error)
	// Upload an artefact to the server.
	UploadArtefact(context.Context, *connect.Request[v1.UploadArtefactRequest]) (*connect.Response[v1.UploadArtefactResponse], error)
	// Create a deployment.
	CreateDeployment(context.Context, *connect.Request[v1.CreateDeploymentRequest]) (*connect.Response[v1.CreateDeploymentResponse], error)
	// Get the schema and artefact metadata for a deployment.
	GetDeployment(context.Context, *connect.Request[v1.GetDeploymentRequest]) (*connect.Response[v1.GetDeploymentResponse], error)
	// Stream deployment artefacts from the server.
	//
	// Each artefact is streamed one after the other as a sequence of max 1MB
	// chunks.
	GetDeploymentArtefacts(context.Context, *connect.Request[v1.GetDeploymentArtefactsRequest]) (*connect.ServerStreamForClient[v1.GetDeploymentArtefactsResponse], error)
	// Register a Runner with the Controller.
	//
	// Each runner issue a RegisterRunnerRequest to the ControllerService
	// every 10 seconds to maintain its heartbeat.
	RegisterRunner(context.Context) *connect.ClientStreamForClient[v1.RegisterRunnerRequest, v1.RegisterRunnerResponse]
	// Update an existing deployment.
	UpdateDeploy(context.Context, *connect.Request[v1.UpdateDeployRequest]) (*connect.Response[v1.UpdateDeployResponse], error)
	// Gradually replace an existing deployment with a new one.
	//
	// If a deployment already exists for the module of the new deployment,
	// it will be scaled down and replaced by the new one.
	ReplaceDeploy(context.Context, *connect.Request[v1.ReplaceDeployRequest]) (*connect.Response[v1.ReplaceDeployResponse], error)
	// Stream logs from a deployment
	StreamDeploymentLogs(context.Context) *connect.ClientStreamForClient[v1.StreamDeploymentLogsRequest, v1.StreamDeploymentLogsResponse]
}

ControllerServiceClient is a client for the xyz.block.ftl.v1.ControllerService service.

func NewControllerServiceClient 

func NewControllerServiceClient(httpClient connect.HTTPClient, baseURL string, opts ...connect.ClientOption) ControllerServiceClient

NewControllerServiceClient constructs a client for the xyz.block.ftl.v1.ControllerService service. By default, it uses the Connect protocol with the binary Protobuf Codec, asks for gzipped responses, and sends uncompressed requests. To use the gRPC or gRPC-Web protocols, supply the connect.WithGRPC() or connect.WithGRPCWeb() options.

The URL supplied here should be the base URL for the Connect or gRPC server (for example, http://api.acme.com or https://acme.com/grpc).

type ControllerServiceHandler 

type ControllerServiceHandler interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// List "processes" running on the cluster.
	ProcessList(context.Context, *connect.Request[v1.ProcessListRequest]) (*connect.Response[v1.ProcessListResponse], error)
	Status(context.Context, *connect.Request[v1.StatusRequest]) (*connect.Response[v1.StatusResponse], error)
	// Get list of artefacts that differ between the server and client.
	GetArtefactDiffs(context.Context, *connect.Request[v1.GetArtefactDiffsRequest]) (*connect.Response[v1.GetArtefactDiffsResponse], error)
	// Upload an artefact to the server.
	UploadArtefact(context.Context, *connect.Request[v1.UploadArtefactRequest]) (*connect.Response[v1.UploadArtefactResponse], error)
	// Create a deployment.
	CreateDeployment(context.Context, *connect.Request[v1.CreateDeploymentRequest]) (*connect.Response[v1.CreateDeploymentResponse], error)
	// Get the schema and artefact metadata for a deployment.
	GetDeployment(context.Context, *connect.Request[v1.GetDeploymentRequest]) (*connect.Response[v1.GetDeploymentResponse], error)
	// Stream deployment artefacts from the server.
	//
	// Each artefact is streamed one after the other as a sequence of max 1MB
	// chunks.
	GetDeploymentArtefacts(context.Context, *connect.Request[v1.GetDeploymentArtefactsRequest], *connect.ServerStream[v1.GetDeploymentArtefactsResponse]) error
	// Register a Runner with the Controller.
	//
	// Each runner issue a RegisterRunnerRequest to the ControllerService
	// every 10 seconds to maintain its heartbeat.
	RegisterRunner(context.Context, *connect.ClientStream[v1.RegisterRunnerRequest]) (*connect.Response[v1.RegisterRunnerResponse], error)
	// Update an existing deployment.
	UpdateDeploy(context.Context, *connect.Request[v1.UpdateDeployRequest]) (*connect.Response[v1.UpdateDeployResponse], error)
	// Gradually replace an existing deployment with a new one.
	//
	// If a deployment already exists for the module of the new deployment,
	// it will be scaled down and replaced by the new one.
	ReplaceDeploy(context.Context, *connect.Request[v1.ReplaceDeployRequest]) (*connect.Response[v1.ReplaceDeployResponse], error)
	// Stream logs from a deployment
	StreamDeploymentLogs(context.Context, *connect.ClientStream[v1.StreamDeploymentLogsRequest]) (*connect.Response[v1.StreamDeploymentLogsResponse], error)
}

ControllerServiceHandler is an implementation of the xyz.block.ftl.v1.ControllerService service.

type SchemaServiceClient added in v0.398.0 

type SchemaServiceClient interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// Get the full schema.
	GetSchema(context.Context, *connect.Request[v1.GetSchemaRequest]) (*connect.Response[v1.GetSchemaResponse], error)
	// Pull schema changes from the Controller.
	//
	// Note that if there are no deployments this will block indefinitely, making it unsuitable for
	// just retrieving the schema. Use GetSchema for that.
	PullSchema(context.Context, *connect.Request[v1.PullSchemaRequest]) (*connect.ServerStreamForClient[v1.PullSchemaResponse], error)
	// UpdateModuleRuntime is used to update the runtime configuration of a module.
	UpdateDeploymentRuntime(context.Context, *connect.Request[v1.UpdateDeploymentRuntimeRequest]) (*connect.Response[v1.UpdateDeploymentRuntimeResponse], error)
}

SchemaServiceClient is a client for the xyz.block.ftl.v1.SchemaService service.

func NewSchemaServiceClient added in v0.398.0 

func NewSchemaServiceClient(httpClient connect.HTTPClient, baseURL string, opts ...connect.ClientOption) SchemaServiceClient

NewSchemaServiceClient constructs a client for the xyz.block.ftl.v1.SchemaService service. By default, it uses the Connect protocol with the binary Protobuf Codec, asks for gzipped responses, and sends uncompressed requests. To use the gRPC or gRPC-Web protocols, supply the connect.WithGRPC() or connect.WithGRPCWeb() options.

The URL supplied here should be the base URL for the Connect or gRPC server (for example, http://api.acme.com or https://acme.com/grpc).

type SchemaServiceHandler added in v0.398.0 

type SchemaServiceHandler interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// Get the full schema.
	GetSchema(context.Context, *connect.Request[v1.GetSchemaRequest]) (*connect.Response[v1.GetSchemaResponse], error)
	// Pull schema changes from the Controller.
	//
	// Note that if there are no deployments this will block indefinitely, making it unsuitable for
	// just retrieving the schema. Use GetSchema for that.
	PullSchema(context.Context, *connect.Request[v1.PullSchemaRequest], *connect.ServerStream[v1.PullSchemaResponse]) error
	// UpdateModuleRuntime is used to update the runtime configuration of a module.
	UpdateDeploymentRuntime(context.Context, *connect.Request[v1.UpdateDeploymentRuntimeRequest]) (*connect.Response[v1.UpdateDeploymentRuntimeResponse], error)
}

SchemaServiceHandler is an implementation of the xyz.block.ftl.v1.SchemaService service.

type UnimplementedAdminServiceHandler added in v0.240.0 

type UnimplementedAdminServiceHandler struct{}

UnimplementedAdminServiceHandler returns CodeUnimplemented from all methods.

func (UnimplementedAdminServiceHandler) ConfigGet added in v0.240.0 

func (UnimplementedAdminServiceHandler) ConfigGet(context.Context, *connect.Request[v1.ConfigGetRequest]) (*connect.Response[v1.ConfigGetResponse], error)

func (UnimplementedAdminServiceHandler) ConfigList added in v0.240.0 

func (UnimplementedAdminServiceHandler) ConfigList(context.Context, *connect.Request[v1.ConfigListRequest]) (*connect.Response[v1.ConfigListResponse], error)

func (UnimplementedAdminServiceHandler) ConfigSet added in v0.240.0 

func (UnimplementedAdminServiceHandler) ConfigSet(context.Context, *connect.Request[v1.ConfigSetRequest]) (*connect.Response[v1.ConfigSetResponse], error)

func (UnimplementedAdminServiceHandler) ConfigUnset added in v0.240.0 

func (UnimplementedAdminServiceHandler) ConfigUnset(context.Context, *connect.Request[v1.ConfigUnsetRequest]) (*connect.Response[v1.ConfigUnsetResponse], error)

func (UnimplementedAdminServiceHandler) MapConfigsForModule added in v0.411.0 

func (UnimplementedAdminServiceHandler) MapConfigsForModule(context.Context, *connect.Request[v1.MapConfigsForModuleRequest]) (*connect.Response[v1.MapConfigsForModuleResponse], error)

func (UnimplementedAdminServiceHandler) MapSecretsForModule added in v0.411.0 

func (UnimplementedAdminServiceHandler) MapSecretsForModule(context.Context, *connect.Request[v1.MapSecretsForModuleRequest]) (*connect.Response[v1.MapSecretsForModuleResponse], error)

func (UnimplementedAdminServiceHandler) Ping added in v0.240.0 

func (UnimplementedAdminServiceHandler) Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)

func (UnimplementedAdminServiceHandler) SecretGet added in v0.240.0 

func (UnimplementedAdminServiceHandler) SecretGet(context.Context, *connect.Request[v1.SecretGetRequest]) (*connect.Response[v1.SecretGetResponse], error)

func (UnimplementedAdminServiceHandler) SecretSet added in v0.240.0 

func (UnimplementedAdminServiceHandler) SecretSet(context.Context, *connect.Request[v1.SecretSetRequest]) (*connect.Response[v1.SecretSetResponse], error)

func (UnimplementedAdminServiceHandler) SecretUnset added in v0.240.0 

func (UnimplementedAdminServiceHandler) SecretUnset(context.Context, *connect.Request[v1.SecretUnsetRequest]) (*connect.Response[v1.SecretUnsetResponse], error)

func (UnimplementedAdminServiceHandler) SecretsList added in v0.240.0 

func (UnimplementedAdminServiceHandler) SecretsList(context.Context, *connect.Request[v1.SecretsListRequest]) (*connect.Response[v1.SecretsListResponse], error)

type UnimplementedControllerServiceHandler 

type UnimplementedControllerServiceHandler struct{}

UnimplementedControllerServiceHandler returns CodeUnimplemented from all methods.

func (UnimplementedControllerServiceHandler) CreateDeployment 

func (UnimplementedControllerServiceHandler) CreateDeployment(context.Context, *connect.Request[v1.CreateDeploymentRequest]) (*connect.Response[v1.CreateDeploymentResponse], error)

func (UnimplementedControllerServiceHandler) GetArtefactDiffs 

func (UnimplementedControllerServiceHandler) GetArtefactDiffs(context.Context, *connect.Request[v1.GetArtefactDiffsRequest]) (*connect.Response[v1.GetArtefactDiffsResponse], error)

func (UnimplementedControllerServiceHandler) GetDeployment 

func (UnimplementedControllerServiceHandler) GetDeployment(context.Context, *connect.Request[v1.GetDeploymentRequest]) (*connect.Response[v1.GetDeploymentResponse], error)

func (UnimplementedControllerServiceHandler) GetDeploymentArtefacts 

func (UnimplementedControllerServiceHandler) GetDeploymentArtefacts(context.Context, *connect.Request[v1.GetDeploymentArtefactsRequest], *connect.ServerStream[v1.GetDeploymentArtefactsResponse]) error

func (UnimplementedControllerServiceHandler) Ping 

func (UnimplementedControllerServiceHandler) Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)

func (UnimplementedControllerServiceHandler) ProcessList 

func (UnimplementedControllerServiceHandler) ProcessList(context.Context, *connect.Request[v1.ProcessListRequest]) (*connect.Response[v1.ProcessListResponse], error)

func (UnimplementedControllerServiceHandler) RegisterRunner 

func (UnimplementedControllerServiceHandler) RegisterRunner(context.Context, *connect.ClientStream[v1.RegisterRunnerRequest]) (*connect.Response[v1.RegisterRunnerResponse], error)

func (UnimplementedControllerServiceHandler) ReplaceDeploy 

func (UnimplementedControllerServiceHandler) ReplaceDeploy(context.Context, *connect.Request[v1.ReplaceDeployRequest]) (*connect.Response[v1.ReplaceDeployResponse], error)

func (UnimplementedControllerServiceHandler) Status 

func (UnimplementedControllerServiceHandler) Status(context.Context, *connect.Request[v1.StatusRequest]) (*connect.Response[v1.StatusResponse], error)

func (UnimplementedControllerServiceHandler) StreamDeploymentLogs 

func (UnimplementedControllerServiceHandler) StreamDeploymentLogs(context.Context, *connect.ClientStream[v1.StreamDeploymentLogsRequest]) (*connect.Response[v1.StreamDeploymentLogsResponse], error)

func (UnimplementedControllerServiceHandler) UpdateDeploy 

func (UnimplementedControllerServiceHandler) UpdateDeploy(context.Context, *connect.Request[v1.UpdateDeployRequest]) (*connect.Response[v1.UpdateDeployResponse], error)

func (UnimplementedControllerServiceHandler) UploadArtefact 

func (UnimplementedControllerServiceHandler) UploadArtefact(context.Context, *connect.Request[v1.UploadArtefactRequest]) (*connect.Response[v1.UploadArtefactResponse], error)

type UnimplementedSchemaServiceHandler added in v0.398.0 

type UnimplementedSchemaServiceHandler struct{}

UnimplementedSchemaServiceHandler returns CodeUnimplemented from all methods.

func (UnimplementedSchemaServiceHandler) GetSchema added in v0.398.0 

func (UnimplementedSchemaServiceHandler) GetSchema(context.Context, *connect.Request[v1.GetSchemaRequest]) (*connect.Response[v1.GetSchemaResponse], error)

func (UnimplementedSchemaServiceHandler) Ping added in v0.398.0 

func (UnimplementedSchemaServiceHandler) Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)

func (UnimplementedSchemaServiceHandler) PullSchema added in v0.398.0 

func (UnimplementedSchemaServiceHandler) PullSchema(context.Context, *connect.Request[v1.PullSchemaRequest], *connect.ServerStream[v1.PullSchemaResponse]) error

func (UnimplementedSchemaServiceHandler) UpdateDeploymentRuntime added in v0.409.0 

func (UnimplementedSchemaServiceHandler) UpdateDeploymentRuntime(context.Context, *connect.Request[v1.UpdateDeploymentRuntimeRequest]) (*connect.Response[v1.UpdateDeploymentRuntimeResponse], error)

type UnimplementedVerbServiceHandler 

type UnimplementedVerbServiceHandler struct{}

UnimplementedVerbServiceHandler returns CodeUnimplemented from all methods.

func (UnimplementedVerbServiceHandler) Call 

func (UnimplementedVerbServiceHandler) Call(context.Context, *connect.Request[v1.CallRequest]) (*connect.Response[v1.CallResponse], error)

func (UnimplementedVerbServiceHandler) Ping 

func (UnimplementedVerbServiceHandler) Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)

type VerbServiceClient 

type VerbServiceClient interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// Issue a synchronous call to a Verb.
	Call(context.Context, *connect.Request[v1.CallRequest]) (*connect.Response[v1.CallResponse], error)
}

VerbServiceClient is a client for the xyz.block.ftl.v1.VerbService service.

func NewVerbServiceClient 

func NewVerbServiceClient(httpClient connect.HTTPClient, baseURL string, opts ...connect.ClientOption) VerbServiceClient

NewVerbServiceClient constructs a client for the xyz.block.ftl.v1.VerbService service. By default, it uses the Connect protocol with the binary Protobuf Codec, asks for gzipped responses, and sends uncompressed requests. To use the gRPC or gRPC-Web protocols, supply the connect.WithGRPC() or connect.WithGRPCWeb() options.

The URL supplied here should be the base URL for the Connect or gRPC server (for example, http://api.acme.com or https://acme.com/grpc).

type VerbServiceHandler 

type VerbServiceHandler interface {
	// Ping service for readiness.
	Ping(context.Context, *connect.Request[v1.PingRequest]) (*connect.Response[v1.PingResponse], error)
	// Issue a synchronous call to a Verb.
	Call(context.Context, *connect.Request[v1.CallRequest]) (*connect.Response[v1.CallResponse], error)
}

VerbServiceHandler is an implementation of the xyz.block.ftl.v1.VerbService service.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.