packet

package
v0.30.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 11, 2024 License: BSD-3-Clause Imports: 35 Imported by: 0

Documentation

Overview

Package packet implements parsing and serialization of OpenPGP packets, as specified in RFC 4880.

Deprecated: this package is unmaintained except for security fixes. New applications should consider a more focused, modern alternative to OpenPGP for their specific task. If you are required to interoperate with OpenPGP systems and need a maintained package, consider a community fork. See https://golang.org/issue/44226.

Index

Constants

View Source 
const (
	NoCompression      = flate.NoCompression
	BestSpeed          = flate.BestSpeed
	BestCompression    = flate.BestCompression
	DefaultCompression = flate.DefaultCompression
)
View Source 
const (
	SigTypeBinary            SignatureType = 0
	SigTypeText                            = 1
	SigTypeGenericCert                     = 0x10
	SigTypePersonaCert                     = 0x11
	SigTypeCasualCert                      = 0x12
	SigTypePositiveCert                    = 0x13
	SigTypeSubkeyBinding                   = 0x18
	SigTypePrimaryKeyBinding               = 0x19
	SigTypeDirectSignature                 = 0x1F
	SigTypeKeyRevocation                   = 0x20
	SigTypeSubkeyRevocation                = 0x28
)
View Source 
const (
	// See RFC 4880, section 5.2.3.21 for details.
	KeyFlagCertify = 1 << iota
	KeyFlagSign
	KeyFlagEncryptCommunications
	KeyFlagEncryptStorage
)
View Source 
const UserAttrImageSubpacket = 1

Variables

This section is empty.

Functions

func NewOCFBDecrypter 

func NewOCFBDecrypter(block cipher.Block, prefix []byte, resync OCFBResyncOption) cipher.Stream

NewOCFBDecrypter returns a cipher.Stream which decrypts data with OpenPGP's cipher feedback mode using the given cipher.Block. Prefix must be the first blockSize + 2 bytes of the ciphertext, where blockSize is the cipher.Block's block size. If an incorrect key is detected then nil is returned. On successful exit, blockSize+2 bytes of decrypted data are written into prefix. Resync determines if the "resynchronization step" from RFC 4880, 13.9 step 7 is performed. Different parts of OpenPGP vary on this point.

func NewOCFBEncrypter 

func NewOCFBEncrypter(block cipher.Block, randData []byte, resync OCFBResyncOption) (cipher.Stream, []byte)

NewOCFBEncrypter returns a cipher.Stream which encrypts data with OpenPGP's cipher feedback mode using the given cipher.Block, and an initial amount of ciphertext. randData must be random bytes and be the same length as the cipher.Block's block size. Resync determines if the "resynchronization step" from RFC 4880, 13.9 step 7 is performed. Different parts of OpenPGP vary on this point.

func SerializeCompressed 

func SerializeCompressed(w io.WriteCloser, algo CompressionAlgo, cc *CompressionConfig) (literaldata io.WriteCloser, err error)

SerializeCompressed serializes a compressed data packet to w and returns a WriteCloser to which the literal data packets themselves can be written and which MUST be closed on completion. If cc is nil, sensible defaults will be used to configure the compression algorithm.

func SerializeEncryptedKey 

func SerializeEncryptedKey(w io.Writer, pub *PublicKey, cipherFunc CipherFunction, key []byte, config *Config) error

SerializeEncryptedKey serializes an encrypted key packet to w that contains key, encrypted to pub. If config is nil, sensible defaults will be used.

func SerializeLiteral 

func SerializeLiteral(w io.WriteCloser, isBinary bool, fileName string, time uint32) (plaintext io.WriteCloser, err error)

SerializeLiteral serializes a literal data packet to w and returns a WriteCloser to which the data itself can be written and which MUST be closed on completion. The fileName is truncated to 255 bytes.

func SerializeSymmetricKeyEncrypted 

func SerializeSymmetricKeyEncrypted(w io.Writer, passphrase []byte, config *Config) (key []byte, err error)

SerializeSymmetricKeyEncrypted serializes a symmetric key packet to w. The packet contains a random session key, encrypted by a key derived from the given passphrase. The session key is returned and must be passed to SerializeSymmetricallyEncrypted. If config is nil, sensible defaults will be used.

func SerializeSymmetricallyEncrypted 

func SerializeSymmetricallyEncrypted(w io.Writer, c CipherFunction, key []byte, config *Config) (contents io.WriteCloser, err error)

SerializeSymmetricallyEncrypted serializes a symmetrically encrypted packet to w and returns a WriteCloser to which the to-be-encrypted packets can be written. If config is nil, sensible defaults will be used.

Types

type CipherFunction 

type CipherFunction uint8

CipherFunction represents the different block ciphers specified for OpenPGP. See http://www.iana.org/assignments/pgp-parameters/pgp-parameters.xhtml#pgp-parameters-13 

const (
	Cipher3DES   CipherFunction = 2
	CipherCAST5  CipherFunction = 3
	CipherAES128 CipherFunction = 7
	CipherAES192 CipherFunction = 8
	CipherAES256 CipherFunction = 9
)

func (CipherFunction) KeySize 

func (cipher CipherFunction) KeySize() int

KeySize returns the key size, in bytes, of cipher.

type Compressed 

type Compressed struct {
	Body io.Reader
}

Compressed represents a compressed OpenPGP packet. The decompressed contents will contain more OpenPGP packets. See RFC 4880, section 5.6.

type CompressionAlgo 

type CompressionAlgo uint8

CompressionAlgo Represents the different compression algorithms supported by OpenPGP (except for BZIP2, which is not currently supported). See Section 9.3 of RFC 4880. 

const (
	CompressionNone CompressionAlgo = 0
	CompressionZIP  CompressionAlgo = 1
	CompressionZLIB CompressionAlgo = 2
)

type CompressionConfig 

type CompressionConfig struct {
	// Level is the compression level to use. It must be set to
	// between -1 and 9, with -1 causing the compressor to use the
	// default compression level, 0 causing the compressor to use
	// no compression and 1 to 9 representing increasing (better,
	// slower) compression levels. If Level is less than -1 or
	// more then 9, a non-nil error will be returned during
	// encryption. See the constants above for convenient common
	// settings for Level.
	Level int
}

CompressionConfig contains compressor configuration settings.

type Config 

type Config struct {
	// Rand provides the source of entropy.
	// If nil, the crypto/rand Reader is used.
	Rand io.Reader
	// DefaultHash is the default hash function to be used.
	// If zero, SHA-256 is used.
	DefaultHash crypto.Hash
	// DefaultCipher is the cipher to be used.
	// If zero, AES-128 is used.
	DefaultCipher CipherFunction
	// Time returns the current time as the number of seconds since the
	// epoch. If Time is nil, time.Now is used.
	Time func() time.Time
	// DefaultCompressionAlgo is the compression algorithm to be
	// applied to the plaintext before encryption. If zero, no
	// compression is done.
	DefaultCompressionAlgo CompressionAlgo
	// CompressionConfig configures the compression settings.
	CompressionConfig *CompressionConfig
	// S2KCount is only used for symmetric encryption. It
	// determines the strength of the passphrase stretching when
	// the said passphrase is hashed to produce a key. S2KCount
	// should be between 1024 and 65011712, inclusive. If Config
	// is nil or S2KCount is 0, the value 65536 used. Not all
	// values in the above range can be represented. S2KCount will
	// be rounded up to the next representable value if it cannot
	// be encoded exactly. When set, it is strongly encrouraged to
	// use a value that is at least 65536. See RFC 4880 Section
	// 3.7.1.3.
	S2KCount int
	// RSABits is the number of bits in new RSA keys made with NewEntity.
	// If zero, then 2048 bit keys are created.
	RSABits int
}

Config collects a number of parameters along with sensible defaults. A nil *Config is valid and results in all default values.

func (*Config) Cipher 

func (c *Config) Cipher() CipherFunction

func (*Config) Compression 

func (c *Config) Compression() CompressionAlgo

func (*Config) Hash 

func (c *Config) Hash() crypto.Hash

func (*Config) Now 

func (c *Config) Now() time.Time

func (*Config) PasswordHashIterations 

func (c *Config) PasswordHashIterations() int

func (*Config) Random 

func (c *Config) Random() io.Reader

type EncryptedKey 

type EncryptedKey struct {
	KeyId      uint64
	Algo       PublicKeyAlgorithm
	CipherFunc CipherFunction // only valid after a successful Decrypt
	Key        []byte         // only valid after a successful Decrypt
	// contains filtered or unexported fields
}

EncryptedKey represents a public-key encrypted session key. See RFC 4880, section 5.1.

func (*EncryptedKey) Decrypt 

func (e *EncryptedKey) Decrypt(priv *PrivateKey, config *Config) error

Decrypt decrypts an encrypted session key with the given private key. The private key must have been decrypted first. If config is nil, sensible defaults will be used.

func (*EncryptedKey) Serialize 

func (e *EncryptedKey) Serialize(w io.Writer) error

Serialize writes the encrypted key packet, e, to w.

type LiteralData 

type LiteralData struct {
	IsBinary bool
	FileName string
	Time     uint32 // Unix epoch time. Either creation time or modification time. 0 means undefined.
	Body     io.Reader
}

LiteralData represents an encrypted file. See RFC 4880, section 5.9.

func (*LiteralData) ForEyesOnly 

func (l *LiteralData) ForEyesOnly() bool

ForEyesOnly returns whether the contents of the LiteralData have been marked as especially sensitive.

type OCFBResyncOption 

type OCFBResyncOption bool

An OCFBResyncOption determines if the "resynchronization step" of OCFB is performed. 

const (
	OCFBResync   OCFBResyncOption = true
	OCFBNoResync OCFBResyncOption = false
)

type OnePassSignature 

type OnePassSignature struct {
	SigType    SignatureType
	Hash       crypto.Hash
	PubKeyAlgo PublicKeyAlgorithm
	KeyId      uint64
	IsLast     bool
}

OnePassSignature represents a one-pass signature packet. See RFC 4880, section 5.4.

func (*OnePassSignature) Serialize 

func (ops *OnePassSignature) Serialize(w io.Writer) error

Serialize marshals the given OnePassSignature to w.

type OpaquePacket 

type OpaquePacket struct {
	// Packet type
	Tag uint8
	// Reason why the packet was parsed opaquely
	Reason error
	// Binary contents of the packet data
	Contents []byte
}

OpaquePacket represents an OpenPGP packet as raw, unparsed data. This is useful for splitting and storing the original packet contents separately, handling unsupported packet types or accessing parts of the packet not yet implemented by this package.

func (*OpaquePacket) Parse 

func (op *OpaquePacket) Parse() (p Packet, err error)

Parse attempts to parse the opaque contents into a structure supported by this package. If the packet is not known then the result will be another OpaquePacket.

func (*OpaquePacket) Serialize 

func (op *OpaquePacket) Serialize(w io.Writer) (err error)

Serialize marshals the packet to a writer in its original form, including the packet header.

type OpaqueReader 

type OpaqueReader struct {
	// contains filtered or unexported fields
}

OpaqueReader reads OpaquePackets from an io.Reader.

func NewOpaqueReader 

func NewOpaqueReader(r io.Reader) *OpaqueReader

func (*OpaqueReader) Next 

func (or *OpaqueReader) Next() (op *OpaquePacket, err error)

Read the next OpaquePacket.

type OpaqueSubpacket 

type OpaqueSubpacket struct {
	SubType  uint8
	Contents []byte
}

OpaqueSubpacket represents an unparsed OpenPGP subpacket, as found in signature and user attribute packets.

func OpaqueSubpackets 

func OpaqueSubpackets(contents []byte) (result []*OpaqueSubpacket, err error)

OpaqueSubpackets extracts opaque, unparsed OpenPGP subpackets from their byte representation.

func (*OpaqueSubpacket) Serialize 

func (osp *OpaqueSubpacket) Serialize(w io.Writer) (err error)

type Packet 

type Packet interface {
	// contains filtered or unexported methods
}

Packet represents an OpenPGP packet. Users are expected to try casting instances of this interface to specific packet types.

func Read 

func Read(r io.Reader) (p Packet, err error)

Read reads a single OpenPGP packet from the given io.Reader. If there is an error parsing a packet, the whole packet is consumed from the input.

type PrivateKey 

type PrivateKey struct {
	PublicKey
	Encrypted bool // if true then the private key is unavailable until Decrypt has been called.

	PrivateKey interface{} // An *{rsa|dsa|ecdsa}.PrivateKey or crypto.Signer/crypto.Decrypter (Decryptor RSA only).
	// contains filtered or unexported fields
}

PrivateKey represents a possibly encrypted private key. See RFC 4880, section 5.5.3.

func NewDSAPrivateKey 

func NewDSAPrivateKey(creationTime time.Time, priv *dsa.PrivateKey) *PrivateKey

func NewECDSAPrivateKey 

func NewECDSAPrivateKey(creationTime time.Time, priv *ecdsa.PrivateKey) *PrivateKey

func NewElGamalPrivateKey 

func NewElGamalPrivateKey(creationTime time.Time, priv *elgamal.PrivateKey) *PrivateKey

func NewRSAPrivateKey 

func NewRSAPrivateKey(creationTime time.Time, priv *rsa.PrivateKey) *PrivateKey

func NewSignerPrivateKey 

func NewSignerPrivateKey(creationTime time.Time, signer crypto.Signer) *PrivateKey

NewSignerPrivateKey creates a PrivateKey from a crypto.Signer that implements RSA or ECDSA.

func (*PrivateKey) Decrypt 

func (pk *PrivateKey) Decrypt(passphrase []byte) error

Decrypt decrypts an encrypted private key using a passphrase.

func (*PrivateKey) Serialize 

func (pk *PrivateKey) Serialize(w io.Writer) (err error)

type PublicKey 

type PublicKey struct {
	CreationTime time.Time
	PubKeyAlgo   PublicKeyAlgorithm
	PublicKey    interface{} // *rsa.PublicKey, *dsa.PublicKey or *ecdsa.PublicKey
	Fingerprint  [20]byte
	KeyId        uint64
	IsSubkey     bool
	// contains filtered or unexported fields
}

PublicKey represents an OpenPGP public key. See RFC 4880, section 5.5.2.

func NewDSAPublicKey 

func NewDSAPublicKey(creationTime time.Time, pub *dsa.PublicKey) *PublicKey

NewDSAPublicKey returns a PublicKey that wraps the given dsa.PublicKey.

func NewECDSAPublicKey 

func NewECDSAPublicKey(creationTime time.Time, pub *ecdsa.PublicKey) *PublicKey

func NewElGamalPublicKey 

func NewElGamalPublicKey(creationTime time.Time, pub *elgamal.PublicKey) *PublicKey

NewElGamalPublicKey returns a PublicKey that wraps the given elgamal.PublicKey.

func NewRSAPublicKey 

func NewRSAPublicKey(creationTime time.Time, pub *rsa.PublicKey) *PublicKey

NewRSAPublicKey returns a PublicKey that wraps the given rsa.PublicKey.

func (*PublicKey) BitLength 

func (pk *PublicKey) BitLength() (bitLength uint16, err error)

BitLength returns the bit length for the given public key.

func (*PublicKey) CanSign 

func (pk *PublicKey) CanSign() bool

CanSign returns true iff this public key can generate signatures

func (*PublicKey) KeyIdShortString 

func (pk *PublicKey) KeyIdShortString() string

KeyIdShortString returns the short form of public key's fingerprint in capital hex, as shown by gpg --list-keys (e.g. "621CC013").

func (*PublicKey) KeyIdString 

func (pk *PublicKey) KeyIdString() string

KeyIdString returns the public key's fingerprint in capital hex (e.g. "6C7EE1B8621CC013").

func (*PublicKey) Serialize 

func (pk *PublicKey) Serialize(w io.Writer) (err error)

func (*PublicKey) SerializeSignaturePrefix 

func (pk *PublicKey) SerializeSignaturePrefix(h io.Writer)

SerializeSignaturePrefix writes the prefix for this public key to the given Writer. The prefix is used when calculating a signature over this public key. See RFC 4880, section 5.2.4.

func (*PublicKey) VerifyKeySignature 

func (pk *PublicKey) VerifyKeySignature(signed *PublicKey, sig *Signature) error

VerifyKeySignature returns nil iff sig is a valid signature, made by this public key, of signed.

func (*PublicKey) VerifyRevocationSignature 

func (pk *PublicKey) VerifyRevocationSignature(sig *Signature) (err error)

VerifyRevocationSignature returns nil iff sig is a valid signature, made by this public key.

func (*PublicKey) VerifySignature 

func (pk *PublicKey) VerifySignature(signed hash.Hash, sig *Signature) (err error)

VerifySignature returns nil iff sig is a valid signature, made by this public key, of the data hashed into signed. signed is mutated by this call.

func (*PublicKey) VerifySignatureV3 

func (pk *PublicKey) VerifySignatureV3(signed hash.Hash, sig *SignatureV3) (err error)

VerifySignatureV3 returns nil iff sig is a valid signature, made by this public key, of the data hashed into signed. signed is mutated by this call.

func (*PublicKey) VerifyUserIdSignature 

func (pk *PublicKey) VerifyUserIdSignature(id string, pub *PublicKey, sig *Signature) (err error)

VerifyUserIdSignature returns nil iff sig is a valid signature, made by this public key, that id is the identity of pub.

func (*PublicKey) VerifyUserIdSignatureV3 

func (pk *PublicKey) VerifyUserIdSignatureV3(id string, pub *PublicKey, sig *SignatureV3) (err error)

VerifyUserIdSignatureV3 returns nil iff sig is a valid signature, made by this public key, that id is the identity of pub.

type PublicKeyAlgorithm 

type PublicKeyAlgorithm uint8

PublicKeyAlgorithm represents the different public key system specified for OpenPGP. See http://www.iana.org/assignments/pgp-parameters/pgp-parameters.xhtml#pgp-parameters-12 

const (
	PubKeyAlgoRSA     PublicKeyAlgorithm = 1
	PubKeyAlgoElGamal PublicKeyAlgorithm = 16
	PubKeyAlgoDSA     PublicKeyAlgorithm = 17
	// RFC 6637, Section 5.
	PubKeyAlgoECDH  PublicKeyAlgorithm = 18
	PubKeyAlgoECDSA PublicKeyAlgorithm = 19

	// Deprecated in RFC 4880, Section 13.5. Use key flags instead.
	PubKeyAlgoRSAEncryptOnly PublicKeyAlgorithm = 2
	PubKeyAlgoRSASignOnly    PublicKeyAlgorithm = 3
)

func (PublicKeyAlgorithm) CanEncrypt 

func (pka PublicKeyAlgorithm) CanEncrypt() bool

CanEncrypt returns true if it's possible to encrypt a message to a public key of the given type.

func (PublicKeyAlgorithm) CanSign 

func (pka PublicKeyAlgorithm) CanSign() bool

CanSign returns true if it's possible for a public key of the given type to sign a message.

type PublicKeyV3 

type PublicKeyV3 struct {
	CreationTime time.Time
	DaysToExpire uint16
	PubKeyAlgo   PublicKeyAlgorithm
	PublicKey    *rsa.PublicKey
	Fingerprint  [16]byte
	KeyId        uint64
	IsSubkey     bool
	// contains filtered or unexported fields
}

PublicKeyV3 represents older, version 3 public keys. These keys are less secure and should not be used for signing or encrypting. They are supported here only for parsing version 3 key material and validating signatures. See RFC 4880, section 5.5.2.

func (*PublicKeyV3) BitLength 

func (pk *PublicKeyV3) BitLength() (bitLength uint16, err error)

BitLength returns the bit length for the given public key.

func (*PublicKeyV3) CanSign 

func (pk *PublicKeyV3) CanSign() bool

CanSign returns true iff this public key can generate signatures

func (*PublicKeyV3) KeyIdShortString 

func (pk *PublicKeyV3) KeyIdShortString() string

KeyIdShortString returns the short form of public key's fingerprint in capital hex, as shown by gpg --list-keys (e.g. "621CC013").

func (*PublicKeyV3) KeyIdString 

func (pk *PublicKeyV3) KeyIdString() string

KeyIdString returns the public key's fingerprint in capital hex (e.g. "6C7EE1B8621CC013").

func (*PublicKeyV3) Serialize 

func (pk *PublicKeyV3) Serialize(w io.Writer) (err error)

func (*PublicKeyV3) SerializeSignaturePrefix 

func (pk *PublicKeyV3) SerializeSignaturePrefix(w io.Writer)

SerializeSignaturePrefix writes the prefix for this public key to the given Writer. The prefix is used when calculating a signature over this public key. See RFC 4880, section 5.2.4.

func (*PublicKeyV3) VerifyKeySignatureV3 

func (pk *PublicKeyV3) VerifyKeySignatureV3(signed *PublicKeyV3, sig *SignatureV3) (err error)

VerifyKeySignatureV3 returns nil iff sig is a valid signature, made by this public key, of signed.

func (*PublicKeyV3) VerifySignatureV3 

func (pk *PublicKeyV3) VerifySignatureV3(signed hash.Hash, sig *SignatureV3) (err error)

VerifySignatureV3 returns nil iff sig is a valid signature, made by this public key, of the data hashed into signed. signed is mutated by this call.

func (*PublicKeyV3) VerifyUserIdSignatureV3 

func (pk *PublicKeyV3) VerifyUserIdSignatureV3(id string, pub *PublicKeyV3, sig *SignatureV3) (err error)

VerifyUserIdSignatureV3 returns nil iff sig is a valid signature, made by this public key, that id is the identity of pub.

type Reader 

type Reader struct {
	// contains filtered or unexported fields
}

Reader reads packets from an io.Reader and allows packets to be 'unread' so that they result from the next call to Next.

func NewReader 

func NewReader(r io.Reader) *Reader

func (*Reader) Next 

func (r *Reader) Next() (p Packet, err error)

Next returns the most recently unread Packet, or reads another packet from the top-most io.Reader. Unknown packet types are skipped.

func (*Reader) Push 

func (r *Reader) Push(reader io.Reader) (err error)

Push causes the Reader to start reading from a new io.Reader. When an EOF error is seen from the new io.Reader, it is popped and the Reader continues to read from the next most recent io.Reader. Push returns a StructuralError if pushing the reader would exceed the maximum recursion level, otherwise it returns nil.

func (*Reader) Unread 

func (r *Reader) Unread(p Packet)

Unread causes the given Packet to be returned from the next call to Next.

type Signature 

type Signature struct {
	SigType    SignatureType
	PubKeyAlgo PublicKeyAlgorithm
	Hash       crypto.Hash

	// HashSuffix is extra data that is hashed in after the signed data.
	HashSuffix []byte
	// HashTag contains the first two bytes of the hash for fast rejection
	// of bad signed data.
	HashTag      [2]byte
	CreationTime time.Time

	RSASignature         parsedMPI
	DSASigR, DSASigS     parsedMPI
	ECDSASigR, ECDSASigS parsedMPI

	SigLifetimeSecs, KeyLifetimeSecs                        *uint32
	PreferredSymmetric, PreferredHash, PreferredCompression []uint8
	IssuerKeyId                                             *uint64
	IsPrimaryId                                             *bool

	// FlagsValid is set if any flags were given. See RFC 4880, section
	// 5.2.3.21 for details.
	FlagsValid                                                           bool
	FlagCertify, FlagSign, FlagEncryptCommunications, FlagEncryptStorage bool

	// RevocationReason is set if this signature has been revoked.
	// See RFC 4880, section 5.2.3.23 for details.
	RevocationReason     *uint8
	RevocationReasonText string

	// MDC is set if this signature has a feature packet that indicates
	// support for MDC subpackets.
	MDC bool

	// EmbeddedSignature, if non-nil, is a signature of the parent key, by
	// this key. This prevents an attacker from claiming another's signing
	// subkey as their own.
	EmbeddedSignature *Signature
	// contains filtered or unexported fields
}

Signature represents a signature. See RFC 4880, section 5.2.

func (*Signature) KeyExpired 

func (sig *Signature) KeyExpired(currentTime time.Time) bool

KeyExpired returns whether sig is a self-signature of a key that has expired.

func (*Signature) Serialize 

func (sig *Signature) Serialize(w io.Writer) (err error)

Serialize marshals sig to w. Sign, SignUserId or SignKey must have been called first.

func (*Signature) Sign 

func (sig *Signature) Sign(h hash.Hash, priv *PrivateKey, config *Config) (err error)

Sign signs a message with a private key. The hash, h, must contain the hash of the message to be signed and will be mutated by this function. On success, the signature is stored in sig. Call Serialize to write it out. If config is nil, sensible defaults will be used.

func (*Signature) SignKey 

func (sig *Signature) SignKey(pub *PublicKey, priv *PrivateKey, config *Config) error

SignKey computes a signature from priv, asserting that pub is a subkey. On success, the signature is stored in sig. Call Serialize to write it out. If config is nil, sensible defaults will be used.

func (*Signature) SignUserId 

func (sig *Signature) SignUserId(id string, pub *PublicKey, priv *PrivateKey, config *Config) error

SignUserId computes a signature from priv, asserting that pub is a valid key for the identity id. On success, the signature is stored in sig. Call Serialize to write it out. If config is nil, sensible defaults will be used.

type SignatureType 

type SignatureType uint8

SignatureType represents the different semantic meanings of an OpenPGP signature. See RFC 4880, section 5.2.1.

type SignatureV3 

type SignatureV3 struct {
	SigType      SignatureType
	CreationTime time.Time
	IssuerKeyId  uint64
	PubKeyAlgo   PublicKeyAlgorithm
	Hash         crypto.Hash
	HashTag      [2]byte

	RSASignature     parsedMPI
	DSASigR, DSASigS parsedMPI
}

SignatureV3 represents older version 3 signatures. These signatures are less secure than version 4 and should not be used to create new signatures. They are included here for backwards compatibility to read and validate with older key material. See RFC 4880, section 5.2.2.

func (*SignatureV3) Serialize 

func (sig *SignatureV3) Serialize(w io.Writer) (err error)

Serialize marshals sig to w. Sign, SignUserId or SignKey must have been called first.

type SymmetricKeyEncrypted 

type SymmetricKeyEncrypted struct {
	CipherFunc CipherFunction
	// contains filtered or unexported fields
}

SymmetricKeyEncrypted represents a passphrase protected session key. See RFC 4880, section 5.3.

func (*SymmetricKeyEncrypted) Decrypt 

func (ske *SymmetricKeyEncrypted) Decrypt(passphrase []byte) ([]byte, CipherFunction, error)

Decrypt attempts to decrypt an encrypted session key and returns the key and the cipher to use when decrypting a subsequent Symmetrically Encrypted Data packet.

type SymmetricallyEncrypted 

type SymmetricallyEncrypted struct {
	MDC bool // true iff this is a type 18 packet and thus has an embedded MAC.
	// contains filtered or unexported fields
}

SymmetricallyEncrypted represents a symmetrically encrypted byte string. The encrypted contents will consist of more OpenPGP packets. See RFC 4880, sections 5.7 and 5.13.

func (*SymmetricallyEncrypted) Decrypt 

func (se *SymmetricallyEncrypted) Decrypt(c CipherFunction, key []byte) (io.ReadCloser, error)

Decrypt returns a ReadCloser, from which the decrypted contents of the packet can be read. An incorrect key can, with high probability, be detected immediately and this will result in a KeyIncorrect error being returned.

type UserAttribute 

type UserAttribute struct {
	Contents []*OpaqueSubpacket
}

UserAttribute is capable of storing other types of data about a user beyond name, email and a text comment. In practice, user attributes are typically used to store a signed thumbnail photo JPEG image of the user. See RFC 4880, section 5.12.

func NewUserAttribute 

func NewUserAttribute(contents ...*OpaqueSubpacket) *UserAttribute

NewUserAttribute creates a new user attribute packet containing the given subpackets.

func NewUserAttributePhoto 

func NewUserAttributePhoto(photos ...image.Image) (uat *UserAttribute, err error)

NewUserAttributePhoto creates a user attribute packet containing the given images.

func (*UserAttribute) ImageData 

func (uat *UserAttribute) ImageData() (imageData [][]byte)

ImageData returns zero or more byte slices, each containing JPEG File Interchange Format (JFIF), for each photo in the user attribute packet.

func (*UserAttribute) Serialize 

func (uat *UserAttribute) Serialize(w io.Writer) (err error)

Serialize marshals the user attribute to w in the form of an OpenPGP packet, including header.

type UserId 

type UserId struct {
	Id string // By convention, this takes the form "Full Name (Comment) <email@example.com>" which is split out in the fields below.

	Name, Comment, Email string
}

UserId contains text that is intended to represent the name and email address of the key holder. See RFC 4880, section 5.11. By convention, this takes the form "Full Name (Comment) <email@example.com>"

func NewUserId 

func NewUserId(name, comment, email string) *UserId

NewUserId returns a UserId or nil if any of the arguments contain invalid characters. The invalid characters are '\x00', '(', ')', '<' and '>'

func (*UserId) Serialize 

func (uid *UserId) Serialize(w io.Writer) error

Serialize marshals uid to w in the form of an OpenPGP packet, including header.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.