token

package
v0.0.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 18, 2024 License: Apache-2.0 Imports: 12 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// Initializes a new mint and optionally deposits all the newly minted
	// tokens in an account.
	//
	// The `InitializeMint` instruction requires no signers and MUST be
	// included within the same Transaction as the system program's
	// `CreateAccount` instruction that creates the account being initialized.
	// Otherwise another party can acquire ownership of the uninitialized
	// account.
	Instruction_InitializeMint uint8 = iota

	// Initializes a new account to hold tokens.  If this account is associated
	// with the native mint then the token balance of the initialized account
	// will be equal to the amount of SOL in the account. If this account is
	// associated with another mint, that mint must be initialized before this
	// command can succeed.
	//
	// The `InitializeAccount` instruction requires no signers and MUST be
	// included within the same Transaction as the system program's
	// `CreateAccount` instruction that creates the account being initialized.
	// Otherwise another party can acquire ownership of the uninitialized
	// account.
	Instruction_InitializeAccount

	// Initializes a multisignature account with N provided signers.
	//
	// Multisignature accounts can used in place of any single owner/delegate
	// accounts in any token instruction that require an owner/delegate to be
	// present.  The variant field represents the number of signers (M)
	// required to validate this multisignature account.
	//
	// The `InitializeMultisig` instruction requires no signers and MUST be
	// included within the same Transaction as the system program's
	// `CreateAccount` instruction that creates the account being initialized.
	// Otherwise another party can acquire ownership of the uninitialized
	// account.
	Instruction_InitializeMultisig

	// Transfers tokens from one account to another either directly or via a
	// delegate.  If this account is associated with the native mint then equal
	// amounts of SOL and Tokens will be transferred to the destination
	// account.
	Instruction_Transfer

	// Approves a delegate.  A delegate is given the authority over tokens on
	// behalf of the source account's owner.
	Instruction_Approve

	// Revokes the delegate's authority.
	Instruction_Revoke

	// Sets a new authority of a mint or account.
	Instruction_SetAuthority

	// Mints new tokens to an account.  The native mint does not support
	// minting.
	Instruction_MintTo

	// Burns tokens by removing them from an account.  `Burn` does not support
	// accounts associated with the native mint, use `CloseAccount` instead.
	Instruction_Burn

	// Close an account by transferring all its SOL to the destination account.
	// Non-native accounts may only be closed if its token amount is zero.
	Instruction_CloseAccount

	// Freeze an Initialized account using the Mint's freeze_authority (if set).
	Instruction_FreezeAccount

	// Thaw a Frozen account using the Mint's freeze_authority (if set).
	Instruction_ThawAccount

	// Transfers tokens from one account to another either directly or via a
	// delegate.  If this account is associated with the native mint then equal
	// amounts of SOL and Tokens will be transferred to the destination
	// account.
	//
	// This instruction differs from Transfer in that the token mint and
	// decimals value is checked by the caller.  This may be useful when
	// creating transactions offline or within a hardware wallet.
	Instruction_TransferChecked

	// Approves a delegate.  A delegate is given the authority over tokens on
	// behalf of the source account's owner.
	//
	// This instruction differs from Approve in that the token mint and
	// decimals value is checked by the caller.  This may be useful when
	// creating transactions offline or within a hardware wallet.
	Instruction_ApproveChecked

	// Mints new tokens to an account.  The native mint does not support minting.
	//
	// This instruction differs from MintTo in that the decimals value is
	// checked by the caller.  This may be useful when creating transactions
	// offline or within a hardware wallet.
	Instruction_MintToChecked

	// Burns tokens by removing them from an account.  `BurnChecked` does not
	// support accounts associated with the native mint, use `CloseAccount`
	// instead.
	//
	// This instruction differs from Burn in that the decimals value is checked
	// by the caller. This may be useful when creating transactions offline or
	// within a hardware wallet.
	Instruction_BurnChecked

	// Like InitializeAccount, but the owner pubkey is passed via instruction data
	// rather than the accounts list. This variant may be preferable when using
	// Cross Program Invocation from an instruction that does not need the owner's
	// `AccountInfo` otherwise.
	Instruction_InitializeAccount2

	// Given a wrapped / native token account (a token account containing SOL)
	// updates its amount field based on the account's underlying `lamports`.
	// This is useful if a non-wrapped SOL account uses `system_instruction::transfer`
	// to move lamports to a wrapped token account, and needs to have its token
	// `amount` field updated.
	Instruction_SyncNative

	// Like InitializeAccount2, but does not require the Rent sysvar to be provided.
	Instruction_InitializeAccount3

	// Like InitializeMultisig, but does not require the Rent sysvar to be provided.
	Instruction_InitializeMultisig2

	// Like InitializeMint, but does not require the Rent sysvar to be provided.
	Instruction_InitializeMint2
)
View Source 
const MAX_SIGNERS = 11

Maximum number of multisignature signers (max N)

View Source 
const MINT_SIZE = 82
View Source 
const ProgramName = "Token"

Variables

View Source 
var InstructionImplDef = ag_binary.NewVariantDefinition(
	ag_binary.Uint8TypeIDEncoding,
	[]ag_binary.VariantType{
		{
			"InitializeMint", (*InitializeMint)(nil),
		},
		{
			"InitializeAccount", (*InitializeAccount)(nil),
		},
		{
			"InitializeMultisig", (*InitializeMultisig)(nil),
		},
		{
			"Transfer", (*Transfer)(nil),
		},
		{
			"Approve", (*Approve)(nil),
		},
		{
			"Revoke", (*Revoke)(nil),
		},
		{
			"SetAuthority", (*SetAuthority)(nil),
		},
		{
			"MintTo", (*MintTo)(nil),
		},
		{
			"Burn", (*Burn)(nil),
		},
		{
			"CloseAccount", (*CloseAccount)(nil),
		},
		{
			"FreezeAccount", (*FreezeAccount)(nil),
		},
		{
			"ThawAccount", (*ThawAccount)(nil),
		},
		{
			"TransferChecked", (*TransferChecked)(nil),
		},
		{
			"ApproveChecked", (*ApproveChecked)(nil),
		},
		{
			"MintToChecked", (*MintToChecked)(nil),
		},
		{
			"BurnChecked", (*BurnChecked)(nil),
		},
		{
			"InitializeAccount2", (*InitializeAccount2)(nil),
		},
		{
			"SyncNative", (*SyncNative)(nil),
		},
		{
			"InitializeAccount3", (*InitializeAccount3)(nil),
		},
		{
			"InitializeMultisig2", (*InitializeMultisig2)(nil),
		},
		{
			"InitializeMint2", (*InitializeMint2)(nil),
		},
	},
)
View Source 
var ProgramID ag_solanago.PublicKey = ag_solanago.TokenProgramID

Functions

func InstructionIDToName 

func InstructionIDToName(id uint8) string

InstructionIDToName returns the name of the instruction given its ID.

func SetProgramID 

func SetProgramID(pubkey ag_solanago.PublicKey)

Types

type Account 

type Account struct {
	// The mint associated with this account
	Mint solana.PublicKey

	// The owner of this account.
	Owner solana.PublicKey

	// The amount of tokens this account holds.
	Amount uint64

	// If `delegate` is `Some` then `delegated_amount` represents
	// the amount authorized by the delegate
	Delegate *solana.PublicKey `bin:"optional"`

	// The account's state
	State AccountState

	// If is_some, this is a native token, and the value logs the rent-exempt reserve. An Account
	// is required to be rent-exempt, so the value is used by the Processor to ensure that wrapped
	// SOL accounts do not drop below this threshold.
	IsNative *uint64 `bin:"optional"`

	// The amount delegated
	DelegatedAmount uint64

	// Optional authority to close the account.
	CloseAuthority *solana.PublicKey `bin:"optional"`
}

func (Account) MarshalWithEncoder 

func (mint Account) MarshalWithEncoder(encoder *bin.Encoder) (err error)

func (*Account) UnmarshalWithDecoder 

func (mint *Account) UnmarshalWithDecoder(dec *bin.Decoder) (err error)

type AccountState 

type AccountState ag_binary.BorshEnum
const (
	// Account is not yet initialized
	Uninitialized AccountState = iota

	// Account is initialized; the account owner and/or delegate may perform permitted operations
	// on this account
	Initialized

	// Account has been frozen by the mint freeze authority. Neither the account owner nor
	// the delegate are able to perform operations on this account.
	Frozen
)

type Approve 

type Approve struct {
	// The amount of tokens the delegate is approved for.
	Amount *uint64

	// [0] = [WRITE] source
	// ··········· The source account.
	//
	// [1] = [] delegate
	// ··········· The delegate.
	//
	// [2] = [] owner
	// ··········· The source account owner.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Approves a delegate. A delegate is given the authority over tokens on behalf of the source account's owner.

func NewApproveInstruction 

func NewApproveInstruction(

	amount uint64,

	source ag_solanago.PublicKey,
	delegate ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *Approve

NewApproveInstruction declares a new Approve instruction with the provided parameters and accounts.

func NewApproveInstructionBuilder 

func NewApproveInstructionBuilder() *Approve

NewApproveInstructionBuilder creates a new `Approve` instruction builder.

func (Approve) Build 

func (inst Approve) Build() *Instruction

func (*Approve) EncodeToTree 

func (inst *Approve) EncodeToTree(parent ag_treeout.Branches)

func (Approve) GetAccounts 

func (slice Approve) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*Approve) GetDelegateAccount 

func (inst *Approve) GetDelegateAccount() *ag_solanago.AccountMeta

GetDelegateAccount gets the "delegate" account. The delegate.

func (*Approve) GetOwnerAccount 

func (inst *Approve) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The source account owner.

func (*Approve) GetSourceAccount 

func (inst *Approve) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The source account.

func (Approve) MarshalWithEncoder 

func (obj Approve) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*Approve) SetAccounts 

func (obj *Approve) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*Approve) SetAmount 

func (inst *Approve) SetAmount(amount uint64) *Approve

SetAmount sets the "amount" parameter. The amount of tokens the delegate is approved for.

func (*Approve) SetDelegateAccount 

func (inst *Approve) SetDelegateAccount(delegate ag_solanago.PublicKey) *Approve

SetDelegateAccount sets the "delegate" account. The delegate.

func (*Approve) SetOwnerAccount 

func (inst *Approve) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *Approve

SetOwnerAccount sets the "owner" account. The source account owner.

func (*Approve) SetSourceAccount 

func (inst *Approve) SetSourceAccount(source ag_solanago.PublicKey) *Approve

SetSourceAccount sets the "source" account. The source account.

func (*Approve) UnmarshalWithDecoder 

func (obj *Approve) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*Approve) Validate 

func (inst *Approve) Validate() error

func (Approve) ValidateAndBuild 

func (inst Approve) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type ApproveChecked 

type ApproveChecked struct {
	// The amount of tokens the delegate is approved for.
	Amount *uint64

	// Expected number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// [0] = [WRITE] source
	// ··········· The source account.
	//
	// [1] = [] mint
	// ··········· The token mint.
	//
	// [2] = [] delegate
	// ··········· The delegate.
	//
	// [3] = [] owner
	// ··········· The source account owner.
	//
	// [4...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Approves a delegate. A delegate is given the authority over tokens on behalf of the source account's owner.

This instruction differs from Approve in that the token mint and decimals value is checked by the caller. This may be useful when creating transactions offline or within a hardware wallet.

func NewApproveCheckedInstruction 

func NewApproveCheckedInstruction(

	amount uint64,
	decimals uint8,

	source ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	delegate ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *ApproveChecked

NewApproveCheckedInstruction declares a new ApproveChecked instruction with the provided parameters and accounts.

func NewApproveCheckedInstructionBuilder 

func NewApproveCheckedInstructionBuilder() *ApproveChecked

NewApproveCheckedInstructionBuilder creates a new `ApproveChecked` instruction builder.

func (ApproveChecked) Build 

func (inst ApproveChecked) Build() *Instruction

func (*ApproveChecked) EncodeToTree 

func (inst *ApproveChecked) EncodeToTree(parent ag_treeout.Branches)

func (ApproveChecked) GetAccounts 

func (slice ApproveChecked) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*ApproveChecked) GetDelegateAccount 

func (inst *ApproveChecked) GetDelegateAccount() *ag_solanago.AccountMeta

GetDelegateAccount gets the "delegate" account. The delegate.

func (*ApproveChecked) GetMintAccount 

func (inst *ApproveChecked) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (*ApproveChecked) GetOwnerAccount 

func (inst *ApproveChecked) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The source account owner.

func (*ApproveChecked) GetSourceAccount 

func (inst *ApproveChecked) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The source account.

func (ApproveChecked) MarshalWithEncoder 

func (obj ApproveChecked) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*ApproveChecked) SetAccounts 

func (obj *ApproveChecked) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*ApproveChecked) SetAmount 

func (inst *ApproveChecked) SetAmount(amount uint64) *ApproveChecked

SetAmount sets the "amount" parameter. The amount of tokens the delegate is approved for.

func (*ApproveChecked) SetDecimals 

func (inst *ApproveChecked) SetDecimals(decimals uint8) *ApproveChecked

SetDecimals sets the "decimals" parameter. Expected number of base 10 digits to the right of the decimal place.

func (*ApproveChecked) SetDelegateAccount 

func (inst *ApproveChecked) SetDelegateAccount(delegate ag_solanago.PublicKey) *ApproveChecked

SetDelegateAccount sets the "delegate" account. The delegate.

func (*ApproveChecked) SetMintAccount 

func (inst *ApproveChecked) SetMintAccount(mint ag_solanago.PublicKey) *ApproveChecked

SetMintAccount sets the "mint" account. The token mint.

func (*ApproveChecked) SetOwnerAccount 

func (inst *ApproveChecked) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *ApproveChecked

SetOwnerAccount sets the "owner" account. The source account owner.

func (*ApproveChecked) SetSourceAccount 

func (inst *ApproveChecked) SetSourceAccount(source ag_solanago.PublicKey) *ApproveChecked

SetSourceAccount sets the "source" account. The source account.

func (*ApproveChecked) UnmarshalWithDecoder 

func (obj *ApproveChecked) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*ApproveChecked) Validate 

func (inst *ApproveChecked) Validate() error

func (ApproveChecked) ValidateAndBuild 

func (inst ApproveChecked) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type AuthorityType 

type AuthorityType ag_binary.BorshEnum
const (
	// Authority to mint new tokens
	AuthorityMintTokens AuthorityType = iota

	// Authority to freeze any account associated with the Mint
	AuthorityFreezeAccount

	// Owner of a given token account
	AuthorityAccountOwner

	// Authority to close a token account
	AuthorityCloseAccount
)

type Burn 

type Burn struct {
	// The amount of tokens to burn.
	Amount *uint64

	// [0] = [WRITE] source
	// ··········· The account to burn from.
	//
	// [1] = [WRITE] mint
	// ··········· The token mint.
	//
	// [2] = [] owner
	// ··········· The account's owner/delegate.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Burns tokens by removing them from an account. `Burn` does not support accounts associated with the native mint, use `CloseAccount` instead.

func NewBurnInstruction 

func NewBurnInstruction(

	amount uint64,

	source ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *Burn

NewBurnInstruction declares a new Burn instruction with the provided parameters and accounts.

func NewBurnInstructionBuilder 

func NewBurnInstructionBuilder() *Burn

NewBurnInstructionBuilder creates a new `Burn` instruction builder.

func (Burn) Build 

func (inst Burn) Build() *Instruction

func (*Burn) EncodeToTree 

func (inst *Burn) EncodeToTree(parent ag_treeout.Branches)

func (Burn) GetAccounts 

func (slice Burn) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*Burn) GetMintAccount 

func (inst *Burn) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (*Burn) GetOwnerAccount 

func (inst *Burn) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The account's owner/delegate.

func (*Burn) GetSourceAccount 

func (inst *Burn) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The account to burn from.

func (Burn) MarshalWithEncoder 

func (obj Burn) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*Burn) SetAccounts 

func (obj *Burn) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*Burn) SetAmount 

func (inst *Burn) SetAmount(amount uint64) *Burn

SetAmount sets the "amount" parameter. The amount of tokens to burn.

func (*Burn) SetMintAccount 

func (inst *Burn) SetMintAccount(mint ag_solanago.PublicKey) *Burn

SetMintAccount sets the "mint" account. The token mint.

func (*Burn) SetOwnerAccount 

func (inst *Burn) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *Burn

SetOwnerAccount sets the "owner" account. The account's owner/delegate.

func (*Burn) SetSourceAccount 

func (inst *Burn) SetSourceAccount(source ag_solanago.PublicKey) *Burn

SetSourceAccount sets the "source" account. The account to burn from.

func (*Burn) UnmarshalWithDecoder 

func (obj *Burn) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*Burn) Validate 

func (inst *Burn) Validate() error

func (Burn) ValidateAndBuild 

func (inst Burn) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type BurnChecked 

type BurnChecked struct {
	// The amount of tokens to burn.
	Amount *uint64

	// Expected number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// [0] = [WRITE] source
	// ··········· The account to burn from.
	//
	// [1] = [WRITE] mint
	// ··········· The token mint.
	//
	// [2] = [] owner
	// ··········· The account's owner/delegate.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Burns tokens by removing them from an account. `BurnChecked` does not support accounts associated with the native mint, use `CloseAccount` instead.

This instruction differs from Burn in that the decimals value is checked by the caller. This may be useful when creating transactions offline or within a hardware wallet.

func NewBurnCheckedInstruction 

func NewBurnCheckedInstruction(

	amount uint64,
	decimals uint8,

	source ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *BurnChecked

NewBurnCheckedInstruction declares a new BurnChecked instruction with the provided parameters and accounts.

func NewBurnCheckedInstructionBuilder 

func NewBurnCheckedInstructionBuilder() *BurnChecked

NewBurnCheckedInstructionBuilder creates a new `BurnChecked` instruction builder.

func (BurnChecked) Build 

func (inst BurnChecked) Build() *Instruction

func (*BurnChecked) EncodeToTree 

func (inst *BurnChecked) EncodeToTree(parent ag_treeout.Branches)

func (BurnChecked) GetAccounts 

func (slice BurnChecked) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*BurnChecked) GetMintAccount 

func (inst *BurnChecked) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (*BurnChecked) GetOwnerAccount 

func (inst *BurnChecked) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The account's owner/delegate.

func (*BurnChecked) GetSourceAccount 

func (inst *BurnChecked) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The account to burn from.

func (BurnChecked) MarshalWithEncoder 

func (obj BurnChecked) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*BurnChecked) SetAccounts 

func (obj *BurnChecked) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*BurnChecked) SetAmount 

func (inst *BurnChecked) SetAmount(amount uint64) *BurnChecked

SetAmount sets the "amount" parameter. The amount of tokens to burn.

func (*BurnChecked) SetDecimals 

func (inst *BurnChecked) SetDecimals(decimals uint8) *BurnChecked

SetDecimals sets the "decimals" parameter. Expected number of base 10 digits to the right of the decimal place.

func (*BurnChecked) SetMintAccount 

func (inst *BurnChecked) SetMintAccount(mint ag_solanago.PublicKey) *BurnChecked

SetMintAccount sets the "mint" account. The token mint.

func (*BurnChecked) SetOwnerAccount 

func (inst *BurnChecked) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *BurnChecked

SetOwnerAccount sets the "owner" account. The account's owner/delegate.

func (*BurnChecked) SetSourceAccount 

func (inst *BurnChecked) SetSourceAccount(source ag_solanago.PublicKey) *BurnChecked

SetSourceAccount sets the "source" account. The account to burn from.

func (*BurnChecked) UnmarshalWithDecoder 

func (obj *BurnChecked) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*BurnChecked) Validate 

func (inst *BurnChecked) Validate() error

func (BurnChecked) ValidateAndBuild 

func (inst BurnChecked) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type CloseAccount 

type CloseAccount struct {

	// [0] = [WRITE] account
	// ··········· The account to close.
	//
	// [1] = [WRITE] destination
	// ··········· The destination account.
	//
	// [2] = [] owner
	// ··········· The account's owner.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Close an account by transferring all its SOL to the destination account. Non-native accounts may only be closed if its token amount is zero.

func NewCloseAccountInstruction 

func NewCloseAccountInstruction(

	account ag_solanago.PublicKey,
	destination ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *CloseAccount

NewCloseAccountInstruction declares a new CloseAccount instruction with the provided parameters and accounts.

func NewCloseAccountInstructionBuilder 

func NewCloseAccountInstructionBuilder() *CloseAccount

NewCloseAccountInstructionBuilder creates a new `CloseAccount` instruction builder.

func (CloseAccount) Build 

func (inst CloseAccount) Build() *Instruction

func (*CloseAccount) EncodeToTree 

func (inst *CloseAccount) EncodeToTree(parent ag_treeout.Branches)

func (*CloseAccount) GetAccount 

func (inst *CloseAccount) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to close.

func (CloseAccount) GetAccounts 

func (slice CloseAccount) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*CloseAccount) GetDestinationAccount 

func (inst *CloseAccount) GetDestinationAccount() *ag_solanago.AccountMeta

GetDestinationAccount gets the "destination" account. The destination account.

func (*CloseAccount) GetOwnerAccount 

func (inst *CloseAccount) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The account's owner.

func (CloseAccount) MarshalWithEncoder 

func (obj CloseAccount) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*CloseAccount) SetAccount 

func (inst *CloseAccount) SetAccount(account ag_solanago.PublicKey) *CloseAccount

SetAccount sets the "account" account. The account to close.

func (*CloseAccount) SetAccounts 

func (obj *CloseAccount) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*CloseAccount) SetDestinationAccount 

func (inst *CloseAccount) SetDestinationAccount(destination ag_solanago.PublicKey) *CloseAccount

SetDestinationAccount sets the "destination" account. The destination account.

func (*CloseAccount) SetOwnerAccount 

func (inst *CloseAccount) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *CloseAccount

SetOwnerAccount sets the "owner" account. The account's owner.

func (*CloseAccount) UnmarshalWithDecoder 

func (obj *CloseAccount) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*CloseAccount) Validate 

func (inst *CloseAccount) Validate() error

func (CloseAccount) ValidateAndBuild 

func (inst CloseAccount) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type FreezeAccount 

type FreezeAccount struct {

	// [0] = [WRITE] account
	// ··········· The account to freeze.
	//
	// [1] = [] mint
	// ··········· The token mint.
	//
	// [2] = [] authority
	// ··········· The mint freeze authority.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Freeze an Initialized account using the Mint's freeze_authority (if set).

func NewFreezeAccountInstruction 

func NewFreezeAccountInstruction(

	account ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	authority ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *FreezeAccount

NewFreezeAccountInstruction declares a new FreezeAccount instruction with the provided parameters and accounts.

func NewFreezeAccountInstructionBuilder 

func NewFreezeAccountInstructionBuilder() *FreezeAccount

NewFreezeAccountInstructionBuilder creates a new `FreezeAccount` instruction builder.

func (FreezeAccount) Build 

func (inst FreezeAccount) Build() *Instruction

func (*FreezeAccount) EncodeToTree 

func (inst *FreezeAccount) EncodeToTree(parent ag_treeout.Branches)

func (*FreezeAccount) GetAccount 

func (inst *FreezeAccount) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to freeze.

func (FreezeAccount) GetAccounts 

func (slice FreezeAccount) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*FreezeAccount) GetAuthorityAccount 

func (inst *FreezeAccount) GetAuthorityAccount() *ag_solanago.AccountMeta

GetAuthorityAccount gets the "authority" account. The mint freeze authority.

func (*FreezeAccount) GetMintAccount 

func (inst *FreezeAccount) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (FreezeAccount) MarshalWithEncoder 

func (obj FreezeAccount) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*FreezeAccount) SetAccount 

func (inst *FreezeAccount) SetAccount(account ag_solanago.PublicKey) *FreezeAccount

SetAccount sets the "account" account. The account to freeze.

func (*FreezeAccount) SetAccounts 

func (obj *FreezeAccount) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*FreezeAccount) SetAuthorityAccount 

func (inst *FreezeAccount) SetAuthorityAccount(authority ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *FreezeAccount

SetAuthorityAccount sets the "authority" account. The mint freeze authority.

func (*FreezeAccount) SetMintAccount 

func (inst *FreezeAccount) SetMintAccount(mint ag_solanago.PublicKey) *FreezeAccount

SetMintAccount sets the "mint" account. The token mint.

func (*FreezeAccount) UnmarshalWithDecoder 

func (obj *FreezeAccount) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*FreezeAccount) Validate 

func (inst *FreezeAccount) Validate() error

func (FreezeAccount) ValidateAndBuild 

func (inst FreezeAccount) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeAccount 

type InitializeAccount struct {

	// [0] = [WRITE] account
	// ··········· The account to initialize.
	//
	// [1] = [] mint
	// ··········· The mint this account will be associated with.
	//
	// [2] = [] owner
	// ··········· The new account's owner/multisignature.
	//
	// [3] = [] $(SysVarRentPubkey)
	// ··········· Rent sysvar.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Initializes a new account to hold tokens. If this account is associated with the native mint then the token balance of the initialized account will be equal to the amount of SOL in the account. If this account is associated with another mint, that mint must be initialized before this command can succeed.

The `InitializeAccount` instruction requires no signers and MUST be included within the same Transaction as the system program's `CreateAccount` instruction that creates the account being initialized. Otherwise another party can acquire ownership of the uninitialized account.

func NewInitializeAccountInstruction 

func NewInitializeAccountInstruction(

	account ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	SysVarRentPubkey ag_solanago.PublicKey) *InitializeAccount

NewInitializeAccountInstruction declares a new InitializeAccount instruction with the provided parameters and accounts.

func NewInitializeAccountInstructionBuilder 

func NewInitializeAccountInstructionBuilder() *InitializeAccount

NewInitializeAccountInstructionBuilder creates a new `InitializeAccount` instruction builder.

func (InitializeAccount) Build 

func (inst InitializeAccount) Build() *Instruction

func (*InitializeAccount) EncodeToTree 

func (inst *InitializeAccount) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeAccount) GetAccount 

func (inst *InitializeAccount) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to initialize.

func (*InitializeAccount) GetMintAccount 

func (inst *InitializeAccount) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint this account will be associated with.

func (*InitializeAccount) GetOwnerAccount 

func (inst *InitializeAccount) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The new account's owner/multisignature.

func (*InitializeAccount) GetSysVarRentPubkeyAccount 

func (inst *InitializeAccount) GetSysVarRentPubkeyAccount() *ag_solanago.AccountMeta

GetSysVarRentPubkeyAccount gets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (InitializeAccount) MarshalWithEncoder 

func (obj InitializeAccount) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeAccount) SetAccount 

func (inst *InitializeAccount) SetAccount(account ag_solanago.PublicKey) *InitializeAccount

SetAccount sets the "account" account. The account to initialize.

func (*InitializeAccount) SetMintAccount 

func (inst *InitializeAccount) SetMintAccount(mint ag_solanago.PublicKey) *InitializeAccount

SetMintAccount sets the "mint" account. The mint this account will be associated with.

func (*InitializeAccount) SetOwnerAccount 

func (inst *InitializeAccount) SetOwnerAccount(owner ag_solanago.PublicKey) *InitializeAccount

SetOwnerAccount sets the "owner" account. The new account's owner/multisignature.

func (*InitializeAccount) SetSysVarRentPubkeyAccount 

func (inst *InitializeAccount) SetSysVarRentPubkeyAccount(SysVarRentPubkey ag_solanago.PublicKey) *InitializeAccount

SetSysVarRentPubkeyAccount sets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (*InitializeAccount) UnmarshalWithDecoder 

func (obj *InitializeAccount) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeAccount) Validate 

func (inst *InitializeAccount) Validate() error

func (InitializeAccount) ValidateAndBuild 

func (inst InitializeAccount) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeAccount2 

type InitializeAccount2 struct {
	// The new account's owner/multisignature.
	Owner *ag_solanago.PublicKey

	// [0] = [WRITE] account
	// ··········· The account to initialize.
	//
	// [1] = [] mint
	// ··········· The mint this account will be associated with.
	//
	// [2] = [] $(SysVarRentPubkey)
	// ··········· Rent sysvar.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Like InitializeAccount, but the owner pubkey is passed via instruction data rather than the accounts list. This variant may be preferable when using Cross Program Invocation from an instruction that does not need the owner's `AccountInfo` otherwise.

func NewInitializeAccount2Instruction 

func NewInitializeAccount2Instruction(

	owner ag_solanago.PublicKey,

	account ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	SysVarRentPubkey ag_solanago.PublicKey) *InitializeAccount2

NewInitializeAccount2Instruction declares a new InitializeAccount2 instruction with the provided parameters and accounts.

func NewInitializeAccount2InstructionBuilder 

func NewInitializeAccount2InstructionBuilder() *InitializeAccount2

NewInitializeAccount2InstructionBuilder creates a new `InitializeAccount2` instruction builder.

func (InitializeAccount2) Build 

func (inst InitializeAccount2) Build() *Instruction

func (*InitializeAccount2) EncodeToTree 

func (inst *InitializeAccount2) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeAccount2) GetAccount 

func (inst *InitializeAccount2) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to initialize.

func (*InitializeAccount2) GetMintAccount 

func (inst *InitializeAccount2) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint this account will be associated with.

func (*InitializeAccount2) GetSysVarRentPubkeyAccount 

func (inst *InitializeAccount2) GetSysVarRentPubkeyAccount() *ag_solanago.AccountMeta

GetSysVarRentPubkeyAccount gets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (InitializeAccount2) MarshalWithEncoder 

func (obj InitializeAccount2) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeAccount2) SetAccount 

func (inst *InitializeAccount2) SetAccount(account ag_solanago.PublicKey) *InitializeAccount2

SetAccount sets the "account" account. The account to initialize.

func (*InitializeAccount2) SetMintAccount 

func (inst *InitializeAccount2) SetMintAccount(mint ag_solanago.PublicKey) *InitializeAccount2

SetMintAccount sets the "mint" account. The mint this account will be associated with.

func (*InitializeAccount2) SetOwner 

func (inst *InitializeAccount2) SetOwner(owner ag_solanago.PublicKey) *InitializeAccount2

SetOwner sets the "owner" parameter. The new account's owner/multisignature.

func (*InitializeAccount2) SetSysVarRentPubkeyAccount 

func (inst *InitializeAccount2) SetSysVarRentPubkeyAccount(SysVarRentPubkey ag_solanago.PublicKey) *InitializeAccount2

SetSysVarRentPubkeyAccount sets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (*InitializeAccount2) UnmarshalWithDecoder 

func (obj *InitializeAccount2) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeAccount2) Validate 

func (inst *InitializeAccount2) Validate() error

func (InitializeAccount2) ValidateAndBuild 

func (inst InitializeAccount2) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeAccount3 

type InitializeAccount3 struct {
	// The new account's owner/multisignature.
	Owner *ag_solanago.PublicKey

	// [0] = [WRITE] account
	// ··········· The account to initialize.
	//
	// [1] = [] mint
	// ··········· The mint this account will be associated with.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Like InitializeAccount2, but does not require the Rent sysvar to be provided.

func NewInitializeAccount3Instruction 

func NewInitializeAccount3Instruction(

	owner ag_solanago.PublicKey,

	account ag_solanago.PublicKey,
	mint ag_solanago.PublicKey) *InitializeAccount3

NewInitializeAccount3Instruction declares a new InitializeAccount3 instruction with the provided parameters and accounts.

func NewInitializeAccount3InstructionBuilder 

func NewInitializeAccount3InstructionBuilder() *InitializeAccount3

NewInitializeAccount3InstructionBuilder creates a new `InitializeAccount3` instruction builder.

func (InitializeAccount3) Build 

func (inst InitializeAccount3) Build() *Instruction

func (*InitializeAccount3) EncodeToTree 

func (inst *InitializeAccount3) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeAccount3) GetAccount 

func (inst *InitializeAccount3) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to initialize.

func (*InitializeAccount3) GetMintAccount 

func (inst *InitializeAccount3) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint this account will be associated with.

func (InitializeAccount3) MarshalWithEncoder 

func (obj InitializeAccount3) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeAccount3) SetAccount 

func (inst *InitializeAccount3) SetAccount(account ag_solanago.PublicKey) *InitializeAccount3

SetAccount sets the "account" account. The account to initialize.

func (*InitializeAccount3) SetMintAccount 

func (inst *InitializeAccount3) SetMintAccount(mint ag_solanago.PublicKey) *InitializeAccount3

SetMintAccount sets the "mint" account. The mint this account will be associated with.

func (*InitializeAccount3) SetOwner 

func (inst *InitializeAccount3) SetOwner(owner ag_solanago.PublicKey) *InitializeAccount3

SetOwner sets the "owner" parameter. The new account's owner/multisignature.

func (*InitializeAccount3) UnmarshalWithDecoder 

func (obj *InitializeAccount3) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeAccount3) Validate 

func (inst *InitializeAccount3) Validate() error

func (InitializeAccount3) ValidateAndBuild 

func (inst InitializeAccount3) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeMint 

type InitializeMint struct {
	// Number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// The authority/multisignature to mint tokens.
	MintAuthority *ag_solanago.PublicKey

	// The freeze authority/multisignature of the mint.
	FreezeAuthority *ag_solanago.PublicKey `bin:"optional"`

	// [0] = [WRITE] mint
	// ··········· The mint to initialize.
	//
	// [1] = [] $(SysVarRentPubkey)
	// ··········· Rent sysvar.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Initializes a new mint and optionally deposits all the newly minted tokens in an account.

The `InitializeMint` instruction requires no signers and MUST be included within the same Transaction as the system program's `CreateAccount` instruction that creates the account being initialized. Otherwise another party can acquire ownership of the uninitialized account.

func NewInitializeMintInstruction 

func NewInitializeMintInstruction(

	decimals uint8,
	mint_authority ag_solanago.PublicKey,
	freeze_authority ag_solanago.PublicKey,

	mint ag_solanago.PublicKey,
	SysVarRentPubkey ag_solanago.PublicKey) *InitializeMint

NewInitializeMintInstruction declares a new InitializeMint instruction with the provided parameters and accounts.

func NewInitializeMintInstructionBuilder 

func NewInitializeMintInstructionBuilder() *InitializeMint

NewInitializeMintInstructionBuilder creates a new `InitializeMint` instruction builder.

func (InitializeMint) Build 

func (inst InitializeMint) Build() *Instruction

func (*InitializeMint) EncodeToTree 

func (inst *InitializeMint) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeMint) GetMintAccount 

func (inst *InitializeMint) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint to initialize.

func (*InitializeMint) GetSysVarRentPubkeyAccount 

func (inst *InitializeMint) GetSysVarRentPubkeyAccount() *ag_solanago.AccountMeta

GetSysVarRentPubkeyAccount gets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (InitializeMint) MarshalWithEncoder 

func (obj InitializeMint) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeMint) SetDecimals 

func (inst *InitializeMint) SetDecimals(decimals uint8) *InitializeMint

SetDecimals sets the "decimals" parameter. Number of base 10 digits to the right of the decimal place.

func (*InitializeMint) SetFreezeAuthority 

func (inst *InitializeMint) SetFreezeAuthority(freeze_authority ag_solanago.PublicKey) *InitializeMint

SetFreezeAuthority sets the "freeze_authority" parameter. The freeze authority/multisignature of the mint.

func (*InitializeMint) SetMintAccount 

func (inst *InitializeMint) SetMintAccount(mint ag_solanago.PublicKey) *InitializeMint

SetMintAccount sets the "mint" account. The mint to initialize.

func (*InitializeMint) SetMintAuthority 

func (inst *InitializeMint) SetMintAuthority(mint_authority ag_solanago.PublicKey) *InitializeMint

SetMintAuthority sets the "mint_authority" parameter. The authority/multisignature to mint tokens.

func (*InitializeMint) SetSysVarRentPubkeyAccount 

func (inst *InitializeMint) SetSysVarRentPubkeyAccount(SysVarRentPubkey ag_solanago.PublicKey) *InitializeMint

SetSysVarRentPubkeyAccount sets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (*InitializeMint) UnmarshalWithDecoder 

func (obj *InitializeMint) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeMint) Validate 

func (inst *InitializeMint) Validate() error

func (InitializeMint) ValidateAndBuild 

func (inst InitializeMint) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeMint2 

type InitializeMint2 struct {
	// Number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// The authority/multisignature to mint tokens.
	MintAuthority *ag_solanago.PublicKey

	// The freeze authority/multisignature of the mint.
	FreezeAuthority *ag_solanago.PublicKey `bin:"optional"`

	// [0] = [WRITE] mint
	// ··········· The mint to initialize.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Like InitializeMint, but does not require the Rent sysvar to be provided.

func NewInitializeMint2Instruction 

func NewInitializeMint2Instruction(

	decimals uint8,
	mint_authority ag_solanago.PublicKey,
	freeze_authority ag_solanago.PublicKey,

	mint ag_solanago.PublicKey) *InitializeMint2

NewInitializeMint2Instruction declares a new InitializeMint2 instruction with the provided parameters and accounts.

func NewInitializeMint2InstructionBuilder 

func NewInitializeMint2InstructionBuilder() *InitializeMint2

NewInitializeMint2InstructionBuilder creates a new `InitializeMint2` instruction builder.

func (InitializeMint2) Build 

func (inst InitializeMint2) Build() *Instruction

func (*InitializeMint2) EncodeToTree 

func (inst *InitializeMint2) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeMint2) GetMintAccount 

func (inst *InitializeMint2) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint to initialize.

func (InitializeMint2) MarshalWithEncoder 

func (obj InitializeMint2) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeMint2) SetDecimals 

func (inst *InitializeMint2) SetDecimals(decimals uint8) *InitializeMint2

SetDecimals sets the "decimals" parameter. Number of base 10 digits to the right of the decimal place.

func (*InitializeMint2) SetFreezeAuthority 

func (inst *InitializeMint2) SetFreezeAuthority(freeze_authority ag_solanago.PublicKey) *InitializeMint2

SetFreezeAuthority sets the "freeze_authority" parameter. The freeze authority/multisignature of the mint.

func (*InitializeMint2) SetMintAccount 

func (inst *InitializeMint2) SetMintAccount(mint ag_solanago.PublicKey) *InitializeMint2

SetMintAccount sets the "mint" account. The mint to initialize.

func (*InitializeMint2) SetMintAuthority 

func (inst *InitializeMint2) SetMintAuthority(mint_authority ag_solanago.PublicKey) *InitializeMint2

SetMintAuthority sets the "mint_authority" parameter. The authority/multisignature to mint tokens.

func (*InitializeMint2) UnmarshalWithDecoder 

func (obj *InitializeMint2) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeMint2) Validate 

func (inst *InitializeMint2) Validate() error

func (InitializeMint2) ValidateAndBuild 

func (inst InitializeMint2) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeMultisig 

type InitializeMultisig struct {
	// The number of signers (M) required to validate this multisignature
	// account.
	M *uint8

	// [0] = [WRITE] account
	// ··········· The multisignature account to initialize.
	//
	// [1] = [] $(SysVarRentPubkey)
	// ··········· Rent sysvar.
	//
	// [2...] = [SIGNER] signers
	// ··········· ..2+N The signer accounts, must equal to N where 1 <= N <=11
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Initializes a multisignature account with N provided signers.

Multisignature accounts can used in place of any single owner/delegate accounts in any token instruction that require an owner/delegate to be present. The variant field represents the number of signers (M) required to validate this multisignature account.

The `InitializeMultisig` instruction requires no signers and MUST be included within the same Transaction as the system program's `CreateAccount` instruction that creates the account being initialized. Otherwise another party can acquire ownership of the uninitialized account.

func NewInitializeMultisigInstruction 

func NewInitializeMultisigInstruction(

	m uint8,

	account ag_solanago.PublicKey,
	SysVarRentPubkey ag_solanago.PublicKey,
	signers []ag_solanago.PublicKey,
) *InitializeMultisig

NewInitializeMultisigInstruction declares a new InitializeMultisig instruction with the provided parameters and accounts.

func NewInitializeMultisigInstructionBuilder 

func NewInitializeMultisigInstructionBuilder() *InitializeMultisig

NewInitializeMultisigInstructionBuilder creates a new `InitializeMultisig` instruction builder.

func (*InitializeMultisig) AddSigners 

func (inst *InitializeMultisig) AddSigners(signers ...ag_solanago.PublicKey) *InitializeMultisig

AddSigners adds the "signers" accounts. ..2+N The signer accounts, must equal to N where 1 <= N <=11

func (InitializeMultisig) Build 

func (inst InitializeMultisig) Build() *Instruction

func (*InitializeMultisig) EncodeToTree 

func (inst *InitializeMultisig) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeMultisig) GetAccount 

func (inst *InitializeMultisig) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The multisignature account to initialize.

func (InitializeMultisig) GetAccounts 

func (slice InitializeMultisig) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*InitializeMultisig) GetSysVarRentPubkeyAccount 

func (inst *InitializeMultisig) GetSysVarRentPubkeyAccount() *ag_solanago.AccountMeta

GetSysVarRentPubkeyAccount gets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (InitializeMultisig) MarshalWithEncoder 

func (obj InitializeMultisig) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeMultisig) SetAccount 

func (inst *InitializeMultisig) SetAccount(account ag_solanago.PublicKey) *InitializeMultisig

SetAccount sets the "account" account. The multisignature account to initialize.

func (*InitializeMultisig) SetAccounts 

func (obj *InitializeMultisig) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*InitializeMultisig) SetM 

func (inst *InitializeMultisig) SetM(m uint8) *InitializeMultisig

SetM sets the "m" parameter. The number of signers (M) required to validate this multisignature account.

func (*InitializeMultisig) SetSysVarRentPubkeyAccount 

func (inst *InitializeMultisig) SetSysVarRentPubkeyAccount(SysVarRentPubkey ag_solanago.PublicKey) *InitializeMultisig

SetSysVarRentPubkeyAccount sets the "$(SysVarRentPubkey)" account. Rent sysvar.

func (*InitializeMultisig) UnmarshalWithDecoder 

func (obj *InitializeMultisig) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeMultisig) Validate 

func (inst *InitializeMultisig) Validate() error

func (InitializeMultisig) ValidateAndBuild 

func (inst InitializeMultisig) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type InitializeMultisig2 

type InitializeMultisig2 struct {
	// The number of signers (M) required to validate this multisignature account.
	M *uint8

	// [0] = [WRITE] account
	// ··········· The multisignature account to initialize.
	//
	// [1] = [SIGNER] signers
	// ··········· The signer accounts, must equal to N where 1 <= N <= 11.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Like InitializeMultisig, but does not require the Rent sysvar to be provided.

func NewInitializeMultisig2Instruction 

func NewInitializeMultisig2Instruction(

	m uint8,

	account ag_solanago.PublicKey,
	signers []ag_solanago.PublicKey,
) *InitializeMultisig2

NewInitializeMultisig2Instruction declares a new InitializeMultisig2 instruction with the provided parameters and accounts.

func NewInitializeMultisig2InstructionBuilder 

func NewInitializeMultisig2InstructionBuilder() *InitializeMultisig2

NewInitializeMultisig2InstructionBuilder creates a new `InitializeMultisig2` instruction builder.

func (*InitializeMultisig2) AddSigners 

func (inst *InitializeMultisig2) AddSigners(signers ...ag_solanago.PublicKey) *InitializeMultisig2

AddSigners adds the "signers" accounts. The signer accounts, must equal to N where 1 <= N <= 11.

func (InitializeMultisig2) Build 

func (inst InitializeMultisig2) Build() *Instruction

func (*InitializeMultisig2) EncodeToTree 

func (inst *InitializeMultisig2) EncodeToTree(parent ag_treeout.Branches)

func (*InitializeMultisig2) GetAccount 

func (inst *InitializeMultisig2) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The multisignature account to initialize.

func (InitializeMultisig2) GetAccounts 

func (slice InitializeMultisig2) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (InitializeMultisig2) MarshalWithEncoder 

func (obj InitializeMultisig2) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*InitializeMultisig2) SetAccount 

func (inst *InitializeMultisig2) SetAccount(account ag_solanago.PublicKey) *InitializeMultisig2

SetAccount sets the "account" account. The multisignature account to initialize.

func (*InitializeMultisig2) SetAccounts 

func (obj *InitializeMultisig2) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*InitializeMultisig2) SetM 

func (inst *InitializeMultisig2) SetM(m uint8) *InitializeMultisig2

SetM sets the "m" parameter. The number of signers (M) required to validate this multisignature account.

func (*InitializeMultisig2) UnmarshalWithDecoder 

func (obj *InitializeMultisig2) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*InitializeMultisig2) Validate 

func (inst *InitializeMultisig2) Validate() error

func (InitializeMultisig2) ValidateAndBuild 

func (inst InitializeMultisig2) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type Instruction 

type Instruction struct {
	ag_binary.BaseVariant
}

func DecodeInstruction 

func DecodeInstruction(accounts []*ag_solanago.AccountMeta, data []byte) (*Instruction, error)

func (*Instruction) Accounts 

func (inst *Instruction) Accounts() (out []*ag_solanago.AccountMeta)

func (*Instruction) Data 

func (inst *Instruction) Data() ([]byte, error)

func (*Instruction) EncodeToTree 

func (inst *Instruction) EncodeToTree(parent ag_treeout.Branches)

func (Instruction) MarshalWithEncoder 

func (inst Instruction) MarshalWithEncoder(encoder *ag_binary.Encoder) error

func (*Instruction) ProgramID 

func (inst *Instruction) ProgramID() ag_solanago.PublicKey

func (*Instruction) TextEncode 

func (inst *Instruction) TextEncode(encoder *ag_text.Encoder, option *ag_text.Option) error

func (*Instruction) UnmarshalWithDecoder 

func (inst *Instruction) UnmarshalWithDecoder(decoder *ag_binary.Decoder) error

type Mint 

type Mint struct {
	// Optional authority used to mint new tokens. The mint authority may only be provided during
	// mint creation. If no mint authority is present then the mint has a fixed supply and no
	// further tokens may be minted.
	MintAuthority *solana.PublicKey `bin:"optional"`

	// Total supply of tokens.
	Supply uint64

	// Number of base 10 digits to the right of the decimal place.
	Decimals uint8

	// Is `true` if this structure has been initialized
	IsInitialized bool

	// Optional authority to freeze token accounts.
	FreezeAuthority *solana.PublicKey `bin:"optional"`
}

func FetchMints 

func FetchMints(rpcCli *rpc.Client) (out []*Mint, err error)

func (*Mint) Decode 

func (mint *Mint) Decode(data []byte) error

func (Mint) MarshalWithEncoder 

func (mint Mint) MarshalWithEncoder(encoder *bin.Encoder) (err error)

func (*Mint) UnmarshalWithDecoder 

func (mint *Mint) UnmarshalWithDecoder(dec *bin.Decoder) (err error)

type MintTo 

type MintTo struct {
	// The amount of new tokens to mint.
	Amount *uint64

	// [0] = [WRITE] mint
	// ··········· The mint.
	//
	// [1] = [WRITE] destination
	// ··········· The account to mint tokens to.
	//
	// [2] = [] authority
	// ··········· The mint's minting authority.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Mints new tokens to an account. The native mint does not support minting.

func NewMintToInstruction 

func NewMintToInstruction(

	amount uint64,

	mint ag_solanago.PublicKey,
	destination ag_solanago.PublicKey,
	authority ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *MintTo

NewMintToInstruction declares a new MintTo instruction with the provided parameters and accounts.

func NewMintToInstructionBuilder 

func NewMintToInstructionBuilder() *MintTo

NewMintToInstructionBuilder creates a new `MintTo` instruction builder.

func (MintTo) Build 

func (inst MintTo) Build() *Instruction

func (*MintTo) EncodeToTree 

func (inst *MintTo) EncodeToTree(parent ag_treeout.Branches)

func (MintTo) GetAccounts 

func (slice MintTo) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*MintTo) GetAuthorityAccount 

func (inst *MintTo) GetAuthorityAccount() *ag_solanago.AccountMeta

GetAuthorityAccount gets the "authority" account. The mint's minting authority.

func (*MintTo) GetDestinationAccount 

func (inst *MintTo) GetDestinationAccount() *ag_solanago.AccountMeta

GetDestinationAccount gets the "destination" account. The account to mint tokens to.

func (*MintTo) GetMintAccount 

func (inst *MintTo) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint.

func (MintTo) MarshalWithEncoder 

func (obj MintTo) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*MintTo) SetAccounts 

func (obj *MintTo) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*MintTo) SetAmount 

func (inst *MintTo) SetAmount(amount uint64) *MintTo

SetAmount sets the "amount" parameter. The amount of new tokens to mint.

func (*MintTo) SetAuthorityAccount 

func (inst *MintTo) SetAuthorityAccount(authority ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *MintTo

SetAuthorityAccount sets the "authority" account. The mint's minting authority.

func (*MintTo) SetDestinationAccount 

func (inst *MintTo) SetDestinationAccount(destination ag_solanago.PublicKey) *MintTo

SetDestinationAccount sets the "destination" account. The account to mint tokens to.

func (*MintTo) SetMintAccount 

func (inst *MintTo) SetMintAccount(mint ag_solanago.PublicKey) *MintTo

SetMintAccount sets the "mint" account. The mint.

func (*MintTo) UnmarshalWithDecoder 

func (obj *MintTo) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*MintTo) Validate 

func (inst *MintTo) Validate() error

func (MintTo) ValidateAndBuild 

func (inst MintTo) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type MintToChecked 

type MintToChecked struct {
	// The amount of new tokens to mint.
	Amount *uint64

	// Expected number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// [0] = [WRITE] mint
	// ··········· The mint.
	//
	// [1] = [WRITE] destination
	// ··········· The account to mint tokens to.
	//
	// [2] = [] authority
	// ··········· The mint's minting authority.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Mints new tokens to an account. The native mint does not support minting.

This instruction differs from MintTo in that the decimals value is checked by the caller. This may be useful when creating transactions offline or within a hardware wallet.

func NewMintToCheckedInstruction 

func NewMintToCheckedInstruction(

	amount uint64,
	decimals uint8,

	mint ag_solanago.PublicKey,
	destination ag_solanago.PublicKey,
	authority ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *MintToChecked

NewMintToCheckedInstruction declares a new MintToChecked instruction with the provided parameters and accounts.

func NewMintToCheckedInstructionBuilder 

func NewMintToCheckedInstructionBuilder() *MintToChecked

NewMintToCheckedInstructionBuilder creates a new `MintToChecked` instruction builder.

func (MintToChecked) Build 

func (inst MintToChecked) Build() *Instruction

func (*MintToChecked) EncodeToTree 

func (inst *MintToChecked) EncodeToTree(parent ag_treeout.Branches)

func (MintToChecked) GetAccounts 

func (slice MintToChecked) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*MintToChecked) GetAuthorityAccount 

func (inst *MintToChecked) GetAuthorityAccount() *ag_solanago.AccountMeta

GetAuthorityAccount gets the "authority" account. The mint's minting authority.

func (*MintToChecked) GetDestinationAccount 

func (inst *MintToChecked) GetDestinationAccount() *ag_solanago.AccountMeta

GetDestinationAccount gets the "destination" account. The account to mint tokens to.

func (*MintToChecked) GetMintAccount 

func (inst *MintToChecked) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The mint.

func (MintToChecked) MarshalWithEncoder 

func (obj MintToChecked) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*MintToChecked) SetAccounts 

func (obj *MintToChecked) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*MintToChecked) SetAmount 

func (inst *MintToChecked) SetAmount(amount uint64) *MintToChecked

SetAmount sets the "amount" parameter. The amount of new tokens to mint.

func (*MintToChecked) SetAuthorityAccount 

func (inst *MintToChecked) SetAuthorityAccount(authority ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *MintToChecked

SetAuthorityAccount sets the "authority" account. The mint's minting authority.

func (*MintToChecked) SetDecimals 

func (inst *MintToChecked) SetDecimals(decimals uint8) *MintToChecked

SetDecimals sets the "decimals" parameter. Expected number of base 10 digits to the right of the decimal place.

func (*MintToChecked) SetDestinationAccount 

func (inst *MintToChecked) SetDestinationAccount(destination ag_solanago.PublicKey) *MintToChecked

SetDestinationAccount sets the "destination" account. The account to mint tokens to.

func (*MintToChecked) SetMintAccount 

func (inst *MintToChecked) SetMintAccount(mint ag_solanago.PublicKey) *MintToChecked

SetMintAccount sets the "mint" account. The mint.

func (*MintToChecked) UnmarshalWithDecoder 

func (obj *MintToChecked) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*MintToChecked) Validate 

func (inst *MintToChecked) Validate() error

func (MintToChecked) ValidateAndBuild 

func (inst MintToChecked) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type Multisig 

type Multisig struct {
	// Number of signers required
	M uint8
	// Number of valid signers
	N uint8
	// Is `true` if this structure has been initialized
	IsInitialized bool
	// Signer public keys
	Signers [MAX_SIGNERS]solana.PublicKey
}

type Revoke 

type Revoke struct {

	// [0] = [WRITE] source
	// ··········· The source account.
	//
	// [1] = [] owner
	// ··········· The source account's owner.
	//
	// [2...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Revokes the delegate's authority.

func NewRevokeInstruction 

func NewRevokeInstruction(

	source ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *Revoke

NewRevokeInstruction declares a new Revoke instruction with the provided parameters and accounts.

func NewRevokeInstructionBuilder 

func NewRevokeInstructionBuilder() *Revoke

NewRevokeInstructionBuilder creates a new `Revoke` instruction builder.

func (Revoke) Build 

func (inst Revoke) Build() *Instruction

func (*Revoke) EncodeToTree 

func (inst *Revoke) EncodeToTree(parent ag_treeout.Branches)

func (Revoke) GetAccounts 

func (slice Revoke) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*Revoke) GetOwnerAccount 

func (inst *Revoke) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The source account's owner.

func (*Revoke) GetSourceAccount 

func (inst *Revoke) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The source account.

func (Revoke) MarshalWithEncoder 

func (obj Revoke) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*Revoke) SetAccounts 

func (obj *Revoke) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*Revoke) SetOwnerAccount 

func (inst *Revoke) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *Revoke

SetOwnerAccount sets the "owner" account. The source account's owner.

func (*Revoke) SetSourceAccount 

func (inst *Revoke) SetSourceAccount(source ag_solanago.PublicKey) *Revoke

SetSourceAccount sets the "source" account. The source account.

func (*Revoke) UnmarshalWithDecoder 

func (obj *Revoke) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*Revoke) Validate 

func (inst *Revoke) Validate() error

func (Revoke) ValidateAndBuild 

func (inst Revoke) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type SetAuthority 

type SetAuthority struct {
	// The type of authority to update.
	AuthorityType *AuthorityType

	// The new authority.
	NewAuthority *ag_solanago.PublicKey `bin:"optional"`

	// [0] = [WRITE] subject
	// ··········· The mint or account to change the authority of.
	//
	// [1] = [] authority
	// ··········· The current authority of the mint or account.
	//
	// [2...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Sets a new authority of a mint or account.

func NewSetAuthorityInstruction 

func NewSetAuthorityInstruction(

	authority_type AuthorityType,
	new_authority ag_solanago.PublicKey,

	subject ag_solanago.PublicKey,
	authority ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *SetAuthority

NewSetAuthorityInstruction declares a new SetAuthority instruction with the provided parameters and accounts.

func NewSetAuthorityInstructionBuilder 

func NewSetAuthorityInstructionBuilder() *SetAuthority

NewSetAuthorityInstructionBuilder creates a new `SetAuthority` instruction builder.

func (SetAuthority) Build 

func (inst SetAuthority) Build() *Instruction

func (*SetAuthority) EncodeToTree 

func (inst *SetAuthority) EncodeToTree(parent ag_treeout.Branches)

func (SetAuthority) GetAccounts 

func (slice SetAuthority) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*SetAuthority) GetAuthorityAccount 

func (inst *SetAuthority) GetAuthorityAccount() *ag_solanago.AccountMeta

GetAuthorityAccount gets the "authority" account. The current authority of the mint or account.

func (*SetAuthority) GetSubjectAccount 

func (inst *SetAuthority) GetSubjectAccount() *ag_solanago.AccountMeta

GetSubjectAccount gets the "subject" account. The mint or account to change the authority of.

func (SetAuthority) MarshalWithEncoder 

func (obj SetAuthority) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*SetAuthority) SetAccounts 

func (obj *SetAuthority) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*SetAuthority) SetAuthorityAccount 

func (inst *SetAuthority) SetAuthorityAccount(authority ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *SetAuthority

SetAuthorityAccount sets the "authority" account. The current authority of the mint or account.

func (*SetAuthority) SetAuthorityType 

func (inst *SetAuthority) SetAuthorityType(authority_type AuthorityType) *SetAuthority

SetAuthorityType sets the "authority_type" parameter. The type of authority to update.

func (*SetAuthority) SetNewAuthority 

func (inst *SetAuthority) SetNewAuthority(new_authority ag_solanago.PublicKey) *SetAuthority

SetNewAuthority sets the "new_authority" parameter. The new authority.

func (*SetAuthority) SetSubjectAccount 

func (inst *SetAuthority) SetSubjectAccount(subject ag_solanago.PublicKey) *SetAuthority

SetSubjectAccount sets the "subject" account. The mint or account to change the authority of.

func (*SetAuthority) UnmarshalWithDecoder 

func (obj *SetAuthority) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*SetAuthority) Validate 

func (inst *SetAuthority) Validate() error

func (SetAuthority) ValidateAndBuild 

func (inst SetAuthority) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type SyncNative 

type SyncNative struct {

	// [0] = [WRITE] tokenAccount
	// ··········· The native token account to sync with its underlying lamports.
	ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Given a wrapped / native token account (a token account containing SOL) updates its amount field based on the account's underlying `lamports`. This is useful if a non-wrapped SOL account uses `system_instruction::transfer` to move lamports to a wrapped token account, and needs to have its token `amount` field updated.

func NewSyncNativeInstruction 

func NewSyncNativeInstruction(

	tokenAccount ag_solanago.PublicKey) *SyncNative

NewSyncNativeInstruction declares a new SyncNative instruction with the provided parameters and accounts.

func NewSyncNativeInstructionBuilder 

func NewSyncNativeInstructionBuilder() *SyncNative

NewSyncNativeInstructionBuilder creates a new `SyncNative` instruction builder.

func (SyncNative) Build 

func (inst SyncNative) Build() *Instruction

func (*SyncNative) EncodeToTree 

func (inst *SyncNative) EncodeToTree(parent ag_treeout.Branches)

func (*SyncNative) GetTokenAccount 

func (inst *SyncNative) GetTokenAccount() *ag_solanago.AccountMeta

GetTokenAccount gets the "tokenAccount" account. The native token account to sync with its underlying lamports.

func (SyncNative) MarshalWithEncoder 

func (obj SyncNative) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*SyncNative) SetTokenAccount 

func (inst *SyncNative) SetTokenAccount(tokenAccount ag_solanago.PublicKey) *SyncNative

SetTokenAccount sets the "tokenAccount" account. The native token account to sync with its underlying lamports.

func (*SyncNative) UnmarshalWithDecoder 

func (obj *SyncNative) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*SyncNative) Validate 

func (inst *SyncNative) Validate() error

func (SyncNative) ValidateAndBuild 

func (inst SyncNative) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type ThawAccount 

type ThawAccount struct {

	// [0] = [WRITE] account
	// ··········· The account to thaw.
	//
	// [1] = [] mint
	// ··········· The token mint.
	//
	// [2] = [] authority
	// ··········· The mint freeze authority.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Thaw a Frozen account using the Mint's freeze_authority (if set).

func NewThawAccountInstruction 

func NewThawAccountInstruction(

	account ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	authority ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *ThawAccount

NewThawAccountInstruction declares a new ThawAccount instruction with the provided parameters and accounts.

func NewThawAccountInstructionBuilder 

func NewThawAccountInstructionBuilder() *ThawAccount

NewThawAccountInstructionBuilder creates a new `ThawAccount` instruction builder.

func (ThawAccount) Build 

func (inst ThawAccount) Build() *Instruction

func (*ThawAccount) EncodeToTree 

func (inst *ThawAccount) EncodeToTree(parent ag_treeout.Branches)

func (*ThawAccount) GetAccount 

func (inst *ThawAccount) GetAccount() *ag_solanago.AccountMeta

GetAccount gets the "account" account. The account to thaw.

func (ThawAccount) GetAccounts 

func (slice ThawAccount) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*ThawAccount) GetAuthorityAccount 

func (inst *ThawAccount) GetAuthorityAccount() *ag_solanago.AccountMeta

GetAuthorityAccount gets the "authority" account. The mint freeze authority.

func (*ThawAccount) GetMintAccount 

func (inst *ThawAccount) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (ThawAccount) MarshalWithEncoder 

func (obj ThawAccount) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*ThawAccount) SetAccount 

func (inst *ThawAccount) SetAccount(account ag_solanago.PublicKey) *ThawAccount

SetAccount sets the "account" account. The account to thaw.

func (*ThawAccount) SetAccounts 

func (obj *ThawAccount) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*ThawAccount) SetAuthorityAccount 

func (inst *ThawAccount) SetAuthorityAccount(authority ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *ThawAccount

SetAuthorityAccount sets the "authority" account. The mint freeze authority.

func (*ThawAccount) SetMintAccount 

func (inst *ThawAccount) SetMintAccount(mint ag_solanago.PublicKey) *ThawAccount

SetMintAccount sets the "mint" account. The token mint.

func (*ThawAccount) UnmarshalWithDecoder 

func (obj *ThawAccount) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*ThawAccount) Validate 

func (inst *ThawAccount) Validate() error

func (ThawAccount) ValidateAndBuild 

func (inst ThawAccount) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type Transfer 

type Transfer struct {
	// The amount of tokens to transfer.
	Amount *uint64

	// [0] = [WRITE] source
	// ··········· The source account.
	//
	// [1] = [WRITE] destination
	// ··········· The destination account.
	//
	// [2] = [] owner
	// ··········· The source account owner/delegate.
	//
	// [3...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Transfers tokens from one account to another either directly or via a delegate. If this account is associated with the native mint then equal amounts of SOL and Tokens will be transferred to the destination account.

func NewTransferInstruction 

func NewTransferInstruction(

	amount uint64,

	source ag_solanago.PublicKey,
	destination ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey) *Transfer

NewTransferInstruction declares a new Transfer instruction with the provided parameters and accounts.

func NewTransferInstructionBuilder 

func NewTransferInstructionBuilder() *Transfer

NewTransferInstructionBuilder creates a new `Transfer` instruction builder.

func (Transfer) Build 

func (inst Transfer) Build() *Instruction

func (*Transfer) EncodeToTree 

func (inst *Transfer) EncodeToTree(parent ag_treeout.Branches)

func (Transfer) GetAccounts 

func (slice Transfer) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*Transfer) GetDestinationAccount 

func (inst *Transfer) GetDestinationAccount() *ag_solanago.AccountMeta

GetDestinationAccount gets the "destination" account. The destination account.

func (*Transfer) GetOwnerAccount 

func (inst *Transfer) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The source account owner/delegate.

func (*Transfer) GetSourceAccount 

func (inst *Transfer) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The source account.

func (Transfer) MarshalWithEncoder 

func (obj Transfer) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*Transfer) SetAccounts 

func (obj *Transfer) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*Transfer) SetAmount 

func (inst *Transfer) SetAmount(amount uint64) *Transfer

SetAmount sets the "amount" parameter. The amount of tokens to transfer.

func (*Transfer) SetDestinationAccount 

func (inst *Transfer) SetDestinationAccount(destination ag_solanago.PublicKey) *Transfer

SetDestinationAccount sets the "destination" account. The destination account.

func (*Transfer) SetOwnerAccount 

func (inst *Transfer) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *Transfer

SetOwnerAccount sets the "owner" account. The source account owner/delegate.

func (*Transfer) SetSourceAccount 

func (inst *Transfer) SetSourceAccount(source ag_solanago.PublicKey) *Transfer

SetSourceAccount sets the "source" account. The source account.

func (*Transfer) UnmarshalWithDecoder 

func (obj *Transfer) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*Transfer) Validate 

func (inst *Transfer) Validate() error

func (Transfer) ValidateAndBuild 

func (inst Transfer) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

type TransferChecked 

type TransferChecked struct {
	// The amount of tokens to transfer.
	Amount *uint64

	// Expected number of base 10 digits to the right of the decimal place.
	Decimals *uint8

	// [0] = [WRITE] source
	// ··········· The source account.
	//
	// [1] = [] mint
	// ··········· The token mint.
	//
	// [2] = [WRITE] destination
	// ··········· The destination account.
	//
	// [3] = [] owner
	// ··········· The source account's owner/delegate.
	//
	// [4...] = [SIGNER] signers
	// ··········· M signer accounts.
	Accounts ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
	Signers  ag_solanago.AccountMetaSlice `bin:"-" borsh_skip:"true"`
}

Transfers tokens from one account to another either directly or via a delegate. If this account is associated with the native mint then equal amounts of SOL and Tokens will be transferred to the destination account.

This instruction differs from Transfer in that the token mint and decimals value is checked by the caller. This may be useful when creating transactions offline or within a hardware wallet.

func NewTransferCheckedInstruction 

func NewTransferCheckedInstruction(

	amount uint64,
	decimals uint8,

	source ag_solanago.PublicKey,
	mint ag_solanago.PublicKey,
	destination ag_solanago.PublicKey,
	owner ag_solanago.PublicKey,
	multisigSigners []ag_solanago.PublicKey,
) *TransferChecked

NewTransferCheckedInstruction declares a new TransferChecked instruction with the provided parameters and accounts.

func NewTransferCheckedInstructionBuilder 

func NewTransferCheckedInstructionBuilder() *TransferChecked

NewTransferCheckedInstructionBuilder creates a new `TransferChecked` instruction builder.

func (TransferChecked) Build 

func (inst TransferChecked) Build() *Instruction

func (*TransferChecked) EncodeToTree 

func (inst *TransferChecked) EncodeToTree(parent ag_treeout.Branches)

func (TransferChecked) GetAccounts 

func (slice TransferChecked) GetAccounts() (accounts []*ag_solanago.AccountMeta)

func (*TransferChecked) GetDestinationAccount 

func (inst *TransferChecked) GetDestinationAccount() *ag_solanago.AccountMeta

GetDestinationAccount gets the "destination" account. The destination account.

func (*TransferChecked) GetMintAccount 

func (inst *TransferChecked) GetMintAccount() *ag_solanago.AccountMeta

GetMintAccount gets the "mint" account. The token mint.

func (*TransferChecked) GetOwnerAccount 

func (inst *TransferChecked) GetOwnerAccount() *ag_solanago.AccountMeta

GetOwnerAccount gets the "owner" account. The source account's owner/delegate.

func (*TransferChecked) GetSourceAccount 

func (inst *TransferChecked) GetSourceAccount() *ag_solanago.AccountMeta

GetSourceAccount gets the "source" account. The source account.

func (TransferChecked) MarshalWithEncoder 

func (obj TransferChecked) MarshalWithEncoder(encoder *ag_binary.Encoder) (err error)

func (*TransferChecked) SetAccounts 

func (obj *TransferChecked) SetAccounts(accounts []*ag_solanago.AccountMeta) error

func (*TransferChecked) SetAmount 

func (inst *TransferChecked) SetAmount(amount uint64) *TransferChecked

SetAmount sets the "amount" parameter. The amount of tokens to transfer.

func (*TransferChecked) SetDecimals 

func (inst *TransferChecked) SetDecimals(decimals uint8) *TransferChecked

SetDecimals sets the "decimals" parameter. Expected number of base 10 digits to the right of the decimal place.

func (*TransferChecked) SetDestinationAccount 

func (inst *TransferChecked) SetDestinationAccount(destination ag_solanago.PublicKey) *TransferChecked

SetDestinationAccount sets the "destination" account. The destination account.

func (*TransferChecked) SetMintAccount 

func (inst *TransferChecked) SetMintAccount(mint ag_solanago.PublicKey) *TransferChecked

SetMintAccount sets the "mint" account. The token mint.

func (*TransferChecked) SetOwnerAccount 

func (inst *TransferChecked) SetOwnerAccount(owner ag_solanago.PublicKey, multisigSigners ...ag_solanago.PublicKey) *TransferChecked

SetOwnerAccount sets the "owner" account. The source account's owner/delegate.

func (*TransferChecked) SetSourceAccount 

func (inst *TransferChecked) SetSourceAccount(source ag_solanago.PublicKey) *TransferChecked

SetSourceAccount sets the "source" account. The source account.

func (*TransferChecked) UnmarshalWithDecoder 

func (obj *TransferChecked) UnmarshalWithDecoder(decoder *ag_binary.Decoder) (err error)

func (*TransferChecked) Validate 

func (inst *TransferChecked) Validate() error

func (TransferChecked) ValidateAndBuild 

func (inst TransferChecked) ValidateAndBuild() (*Instruction, error)

ValidateAndBuild validates the instruction parameters and accounts; if there is a validation error, it returns the error. Otherwise, it builds and returns the instruction.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.