sidecar

command module
v1.1.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 3, 2017 License: MIT Imports: 27 Imported by: 0

README

Sidecar Sidecar

travis

Sidecar is a dynamic service discovery platform requiring no external coordination service. It's a peer-to-peer system that uses a gossip protocol for all communication between hosts. Sidecar health checks local services and announces them to peer systems. It's Docker-native so your containerized applications work out of the box.

Services communicate to each other through an HAproxy instance on each host that is itself managed and configured by Sidecar. It is inspired by Airbnb's SmartStack. But, we believe it has a few advantages over SmartStack:

  • Native support for Docker (works without Docker, too!)
  • No dependence on Zookeeper or other centralized services
  • Peer-to-peer, so it works on your laptop or on a large cluster
  • Static binary means it's easy to deploy, and there is no interpreter needed
  • Tiny memory usage (under 20MB) and few execution threads means its very light weight

See it in Action: We've presented Sidecar at Velocity 2015 and recorded a YouTube video demonstrating Sidecar with Centurion, deploying services in Docker containers, and seeing Sidecar discover and health check them. The second video shows the current state of the UI which is improved since the first video.

YouTube Video YouTube Video2

Overview and Theory

Sidecar is an eventually consistent service discovery platform where hosts learn about each others' state via a gossip protocol. Hosts exchange messages about which services they are running and which have gone away. All messages are timestamped and the latest timestamp always wins. Each host maintains its own local state and continually merges changes in from others. Messaging is over UDP except when doing anti-entropy transfers.

There is an anti-entropy mechanism where full state exchanges take place between peer nodes on an intermittent basis. This allows for any missed messages to propagate, and helps keep state consistent across the cluster.

Sidecar hosts join a cluster by having a set of cluster seed hosts passed to them on the command line at startup. Once in a cluster, the first thing a host does is merge the state directly from another host. This is a big JSON blob that is delivered over a TCP session directly between the hosts.

Now the host starts continuously polling its own services and reviewing the services that it has in its own state, sleeping a couple of seconds in between. It announces its services as UDP gossip messages every couple of seconds, and also announces tombstone records for any services which have gone away. Likewise, when a host leaves the cluster, any peers that were notified send tombstone records for all of its services. These eventually converge and the latest records should propagate everywhere. If the host rejoins the cluster, it will announce new state every few seconds so the services will be picked back up.

There are lifespans assigned to both tombstone and alive records so that:

  1. A service that was not correctly tombstoned will go away in short order
  2. We do not continually add to the tombstone state we are carrying

Because the gossip mechanism is UDP and a service going away is a higher priority message, each tombstone is sent twice initially, followed by once a second for 10 seconds. This delivers reliable messaging of service death.

Timestamps are all local to the host that sent them. This is because we can have clock drift on various machines. But if we always look at the origin timestamp they will at least be comparable to each other by all hosts in the cluster. The one exception to this is that if clock drift is more than a second or two, the alive lifespan may be negatively impacted.

Running it

You can download the latest release from the GitHub Releases page.

If you'd rather build it yourself, you should install the latest version of the Go compiler. Sidecar has not been tested with gccgo, only the mainstream Go compiler.

It's a Go application and the dependencies are all vendored into the vendor/ directory so you should be able to build it out of the box.

$ go build

Or you can run it like this:

$ go run *.go --cluster-ip <boostrap_host>

You always need to supply at least one IP address or hostname with the --cluster-ip argument. If are running solo, or are the first member, this can be your own hostname. You may specify the argument multiple times to have multiple hosts. It is recommended to use more than one when possible.

Running in a Container

The easiest way to deploy Sidecar to your Docker fleet is to run it in a container itself. Instructions for doing that are provided.

Nitro Software maintains builds of the Docker container image on Docker Hub. Note that the README describes how to configure this container.

Configuration

Sidecar expects to find a TOML config file, by default named sidecar.toml in the current path, to specify how it should operate. You can tell it to use a specific file with the --config-file or -f option on the command line.

It comes supplied with an example config file called sidecar.example.toml which you should copy and modify as needed.

Sidecar supports both Docker-based discovery and a discovery mechanism where you publish services into a JSON file locally. These can then be advertised as running services just like they would be from a Docker host.

Discovery

Sidecar currently supports two methods of discovery and these can be set in the sidecar.toml file in the sidecar section.

A configuration for both Docker and static discovery looks like this:

[sidecar]
discovery = [ "docker", "static" ]

Zero or more options may be supplied. Note that if nothing is in this section, Sidecar will only participate in a cluster but will not announce anything.

Configuring Docker Discovery

Sidecar currently accepts a single option for Docker-based discovery, the URL to use to connect to Docker. You really want this to be the local machine. It uses the same URLs that are supported by the Docker command line tools. The configuration block for Sidecar looks like this:

[docker_discovery]
docker_url = "tcp://localhost:2375"

Note that it only supports a single URL, unlike the Docker CLI tool.

Sidecar can now use the normal Docker environment variables for configuring Docker discovery. If you remove the docker_url setting from the config entirely, it will fall back to trying to use environment variables to configure Docker. It uses the standard variables like DOCKER_HOST, TLS_VERIFY, etc.

Labels

A few Docker labels can be used to control the discovery behavior of Sidecar. Services may be started with one or more ServicePort_xxx labels that help Sidecar to understand ports that are mapped dynamically. This controls the port on which HAproxy will listen for the service as well. If I have a service where the container is built with EXPOSE 80 and I want HAproxy to listen on port 8080 then I will add a Docker label to the service in the form:

	ServicePort_80=8080

With dynamic port bindings, Docker may then bind that to 32767 but Sidecar will know which service and port that belongs.

All containers need to be started with two labels defining how they are to be health checked. To health check a service on port 9090 on the local system with an HttpGet check, for example, you would use the following labels:

	HealthCheck=HttpGet
	HealthCheckArgs=http://:9090/status

The currently available check types are HttpGet and External. External checks will run the command specified in the HealthCheckArgs label (in the context of a bash shell). An exit status of 0 is considered healthy and anything else is unhealthy. Nagios checks work very well with this mode of health checking.

Additionally, it can sometimes be nice to exclude certain containers from discovery. This is particularly useful if you are running Sidecar in a container itself. This is accomplished with another Docker label like so:

	SidecarDiscover=false

By default, HAProxy will run in HTTP mode. The mode can be changed to TCP by setting the following Docker label:

ProxyMode=tcp

Finally, you sometimes need to pass information in the Docker labels which is not available to you at the time of container creation. One example of this is the need to identify the actual Docker-bound port when running the health check. For this reason, Sidecar allows simple templating in the labels. Here's an example.

If you have a service that is exposing port 8080 and Docker dynamically assigns it the port 31445 at runtime, your health check for that port will be impossible to define ahead of time. But with templating we can say:

--label HealthCheckArgs="http://{{ host }}:{{ tcp 8080 }}/"

This will then fill the template fields, at call time, with the current hostname and the actual port that Docker bound to your container's port 8080. Querying of UDP ports works as you might expect, by calling {{ udp 53 }} for example.

Note that the tcp and udp method calls in the templates refer only to ports mapped with ServicePort labels. You will need to use the port number that you expect HAproxy to use.

####Configuring Static Discovery

Static Discovery requires a configuration block in the sidecar.toml that looks like this:

[static_discovery]
config_file = "/my_path/static.json"

That in turn points to a static discovery file that looks like this:

[
    {
        "Service": {
            "Name": "some_service",
            "Image": "bb6268ff91dc42a51f51db53846f72102ed9ff3f",
            "Ports": [
                {
                    "Type": "tcp",
                    "Port": 10234,
					"ServicePort": 9999
                }
            ],
			"ProxyMode": "http",
        },
        "Check": {
            "Type": "HttpGet",
            "Args": "http://:10234/"
        }
    },
	{
	...
	}
]

Here we've defined both the service itself and the health check to use to validate its status. It supports a single health check per service. You should supply something in place of the value for Image that is meaningful to you. Usually this is a version or git commit string. It will show up in the Sidecar web UI.

Monitoring It

The logging output is pretty (too?) verbose and contains lots of information about what's going on and what the current state is. Or you can use the web interface.

Currently the web interface runs on port 7777 on each machine that runs sidecar.

The /services endpoint is a very textual web interface for humans. The /services.json endpoint is JSON-encoded. The JSON is still pretty-printed so it's readable by humans.

Contributing

Contributions are more than welcome. Bug reports with specific reproduction steps are great. If you have a code contribution you'd like to make, open a pull request with suggested code.

Pull requests should:

  • Clearly state their intent in the title
  • Have a description that explains the need for the changes
  • Include tests!
  • Not break the public API

Ping us to let us know you're working on something interesting by opening a GitHub Issue on the project.

By contributing to this project you agree that you are granting New Relic a non-exclusive, non-revokable, no-cost license to use the code, algorithms, patents, and ideas in that code in our products if we so choose. You also agree the code is provided as-is and you provide no warranties as to its fitness or correctness for any purpose

The logo is used with kind permission from Picture Esk.

Documentation

The Go Gopher

There is no documentation for this package.

Directories

Path Synopsis
These are types that conform to the Checker interface and can be assigned to a Check for watching service health.
These are types that conform to the Checker interface and can be assigned to a Check for watching service health.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL