netappdvp

README

NetApp Docker Volume Plugin

The NetApp Docker Volume Plugin (nDVP) provides direct integration with the Docker ecosystem for NetApp's ONTAP, E-Series, and SolidFire storage platforms. The nDVP package supports the provisioning and management of storage resources from the storage platform to Docker hosts, with a robust framework for adding additional platforms in the future.

Multiple instances of the nDVP can run concurrently on the same host. The allows simultaneous connections to multiple storage systems and storage types, with the ablity to customize the storage used for the Docker volume(s).

• Quick Start
• Running Multiple nDVP Instances
• Configuring your Docker host for NFS or iSCSI
  • NFS
    • RHEL / CentOS
    • Ubuntu / Debian
  • iSCSI
    • RHEL / CentOS
    • Ubuntu / Debian
• Global Config File Variables
  • Storage Prefix
• ONTAP Config File Variables
  • Example ONTAP Config Files
• E-Series Config File Variables
  • Example E-Series Config Files
  • E-Series Array Setup Notes
• SolidFire Config File Variables
  • Example Solidfire Config Files

Quick Start

1. Ensure you have Docker version 1.10 or above.

   docker --version
   

   If your version is out of date, update to the latest.

   curl -fsSL https://get.docker.com/ | sh
   

   Or, follow the instructions for your distribution.

2. After ensuring the correct version of Docker is installed, install and configure the NetApp Docker Volume Plugin. Note, you will need to ensure that NFS and/or iSCSI is configured for your system. See the installation instructions below for detailed information on how to do this.

   # download and unpack the application
   wget https://github.com/NetApp/netappdvp/releases/download/v1.2.1/netappdvp-1.2.1.tar.gz
   tar zxf netappdvp-1.2.1.tar.gz
   
   # move to a location in the bin path
   sudo mv netappdvp /usr/local/bin
   sudo chown root:root /usr/local/bin/netappdvp
   sudo chmod 755 /usr/local/bin/netappdvp
   
   # create a location for the config files
   sudo mkdir -p /etc/netappdvp
   
   # create the configuration file, see below for more configuration examples
   cat << EOF > /etc/netappdvp/ontap-nas.json
   {
       "version": 1,
       "storageDriverName": "ontap-nas",
       "managementLIF": "10.0.0.1",
       "dataLIF": "10.0.0.2",
       "svm": "svm_nfs",
       "username": "vsadmin",
       "password": "netapp123",
       "aggregate": "aggr1"
   }
   EOF
   

3. After placing the binary and creating the configuration file(s), start the nDVP daemon using the desired configuration file.

   Note: Unless specified, the default name for the volume driver will be "netapp".

   sudo netappdvp --config=/etc/netappdvp/ontap-nas.json
   

4. Once the daemon is started, create and manage volumes using the Docker CLI interface.

   docker volume create -d netapp --name ndvp_1
   

   Provision Docker volume when starting a container:

   docker run --rm -it --volume-driver netapp --volume ndvp_2:/my_vol alpine ash
   

   Destroy docker volume:

   docker volume rm ndvp_1
   docker volume rm ndvp_2
   

Running Multiple nDVP Instances

1. Launch the plugin with an NFS configuration using a custom driver ID:

   sudo netappdvp --volume-driver=netapp-nas --config=/path/to/config-nfs.json
   

2. Launch the plugin with an iSCSI configuration using a custom driver ID:

   sudo netappdvp --volume-driver=netapp-san --config=/path/to/config-iscsi.json
   

3. Provision Docker volumes each driver instance:

   NFS

   docker volume create -d netapp-nas --name my_nfs_vol
   

   iSCSI

   docker volume create -d netapp-san --name my_iscsi_vol
   

Configuring your Docker host for NFS or iSCSI

NFS

Install the following system packages:

RHEL / CentOS

sudo yum install -y nfs-utils

Ubuntu / Debian

sudo apt-get install -y nfs-common

iSCSI

RHEL / CentOS

1. Install the following system packages:

   sudo yum install -y lsscsi iscsi-initiator-utils sg3_utils device-mapper-multipath
   

2. Start the multipathing daemon:

   sudo mpathconf --enable --with_multipathd y
   

3. Ensure that iscsid and multipathd are enabled and running:

   sudo systemctl enable iscsid multipathd
   sudo systemctl start iscsid multipathd
   

4. Discover the iSCSI targets:

   sudo iscsiadm -m discoverydb -t st -p <DATA_LIF_IP> --discover
   

5. Login to the discovered iSCSI targets:

   sudo iscsiadm -m node -p <DATA_LIF_IP> --login
   

6. Start and enable iscsi:

   sudo systemctl enable iscsi
   sudo systemctl start iscsi
   

Ubuntu / Debian

1. Install the following system packages:

   sudo apt-get install -y open-iscsi lsscsi sg3-utils multipath-tools scsitools
   

2. Enable multipathing:

   sudo tee /etc/multipath.conf <<-'EOF'
   defaults {
       user_friendly_names yes
       find_multipaths yes
   }
   EOF
   
   sudo service multipath-tools restart
   

3. Ensure that iscsid and multipathd are running:

   sudo service open-iscsi start
   sudo service multipath-tools start
   

4. Discover the iSCSI targets:

   sudo iscsiadm -m discoverydb -t st -p <DATA_LIF_IP> --discover
   

5. Login to the discovered iSCSI targets:

   sudo iscsiadm -m node -p <DATA_LIF_IP> --login
   

Global Configuration File Variables

Option	Description	Example
version	Config file version number	1
storageDriverName	ontap-nas, ontap-san, eseries-iscsi, or solidfire-san	ontap-nas
debug	Turn debugging output on or off	false
storagePrefix	Optional prefix for volume names. Default: "netappdvp_"	netappdvp_

Storage Prefix

A new config file variable has been added in v1.2 called "storagePrefix" that allows you to modify the prefix applied to volume names by the plugin. By default, when you run docker volume create, the volume name supplied is prepended with "netappdvp_". ("netappdvp-" for SolidFire.)

If you wish to use a different prefix, you can specify it with this directive. Alternatively, you can use pre-existing volumes with the volume plugin by setting storagePrefix to an empty string, "".

A note of caution: docker volume rm will delete these volumes just as it does volumes created by the plugin using the default prefix. Be very careful when using pre-existing volumes!

ONTAP Config File Variables

In addition to the global configuration values above, when using clustered Data ONTAP, these options are avaialble.

Option	Description	Example
managementLIF	IP address of clustered Data ONTAP management LIF	10.0.0.1
dataLIF	IP address of protocol lif; will be derived if not specified	10.0.0.2
svm	Storage virtual machine to use (req, if management LIF is a cluster LIF)	svm_nfs
username	Username to connect to the storage device	vsadmin
password	Password to connect to the storage device	netapp123
aggregate	Aggregate to use for volume/LUN provisioning	aggr1

Example ONTAP Config Files

NFS Example for ontap-nas driver

{
    "version": 1,
    "storageDriverName": "ontap-nas",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.2",
    "svm": "svm_nfs",
    "username": "vsadmin",
    "password": "netapp123",
    "aggregate": "aggr1"
}

iSCSI Example for ontap-san driver

{
    "version": 1,
    "storageDriverName": "ontap-san",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.3",
    "svm": "svm_iscsi",
    "username": "vsadmin",
    "password": "netapp123",
    "aggregate": "aggr1"
}

E-Series Config File Variables

In addition to the global configuration values above, when using E-Series, these options are avaialble.

Option	Description	Example
webProxyHostname	Hostname or IP address of Web Services Proxy	localhost
username	Username for Web Services Proxy	rw
password	Password for Web Services Proxy	rw
controllerA	IP address of controller A	10.0.0.5
controllerB	IP address of controller B	10.0.0.6
passwordArray	Password for storage array if set	blank/empty
hostData_IP	Host iSCSI IP address (if multipathing just choose either one)	10.0.0.101

Example E-Series Config File

Example for eseries-iscsi driver

{    
	"version": 1,    
	"storageDriverName": "eseries-iscsi",    
	"debug": true,    
	"webProxyHostname": "localhost",    
	"username": "rw",    
	"password": "rw",    
	"controllerA": "10.0.0.5",    
	"controllerB": "10.0.0.6",    
	"passwordArray": "",    
	"hostData_IP": "10.0.0.101"
}

E-Series Array Setup Notes

The E-Series Docker driver assumes that you have a volume group or a DDP pool pre-configured (N number of drives; segment size; RAID type; ...). The driver then allocates Docker volumes out of this volume group or DDP pool. The volume group and/or DDP pool must be given a specific name and there must be two groups allocated. For example, you could create a volume group/DDP pool named 'netappdvp_hdd' and another named 'netappdvp_ssd'.

When creating a docker volume you can specify the volume size as well as the allocation group/DDP pool using the '-o' option and the tags 'size' and 'mediaType'. Note that these are optional; if unspecified, the defaults will be a 1 GB volume allocated from the HDD pool. An example of using these tags to create a 2 GB volume from the SSD volume group/DDP pool:

docker volume create -d netapp --name my_vol -o size=2g -o mediaType=ssd 	

Note that the current driver is meant to be used with iSCSI.

Compatibility note: When assigning LUN numbers for volumes attached to Linux hosts, start with LUN 1 rather than LUN 0. If an array is connected to the host before a device is mapped to LUN 0, the Linux host will detect the REPORT LUNS well known logical unit as LUN 0, so that it can complete discovery. LUN 0 might not immediately map properly with a simple rescan, depending on the version of the host operating system in use.

See SANtricity Storage Manager 11.20 SAS Configuration and Provisioning for Linux Express Guide for more details.

SolidFire Config File Variables

In addition to the global configuration values above, when using SolidFire, these options are avaialble.

Option	Description	Example
Endpoint	Ex. https://:@/json-rpc/
SVIP	iSCSI IP address and port	10.0.0.7:3260
TenantName	SF Tenant to use (created if not found)	"docker"
DefaultVolSz	Volume size in GiB	1
InitiatorIFace	Specify interface when restricting iSCSI traffic to non-default interface	"default"
Types	QoS specifications	See below

Example Solidfire Config File

{
    "version": 1,
    "storageDriverName": "solidfire-san",
    "debug": false,
    "Endpoint": "https://admin:admin@192.168.160.3/json-rpc/7.0",
    "SVIP": "10.0.0.7:3260",
    "TenantName": "docker",
    "DefaultVolSz": 1,
    "InitiatorIFace": "default",
    "Types": [
        {
            "Type": "Bronze",
            "Qos": {
                "minIOPS": 1000,
                "maxIOPS": 2000,
                "burstIOPS": 4000
            }
        },
        {
            "Type": "Silver",
            "Qos": {
                "minIOPS": 4000,
                "maxIOPS": 6000,
                "burstIOPS": 8000
            }
        },
        {
            "Type": "Gold",
            "Qos": {
                "minIOPS": 6000,
                "maxIOPS": 8000,
                "burstIOPS": 10000
            }
        }
    ]

}